Adding upstream version 124.0.1.upstream/124.0.1

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 834 insertions, 0 deletions

diff --git a/media/libjpeg/jdhuff.c b/media/libjpeg/jdhuff.c
new file mode 100644
index 0000000000..679d221685
--- /dev/null
+++ b/media/libjpeg/jdhuff.c
@@ -0,0 +1,834 @@
+/*
+ * jdhuff.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2009-2011, 2016, 2018-2019, D. R. Commander.
+ * Copyright (C) 2018, Matthias Räncker.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains Huffman entropy decoding routines.
+ *
+ * Much of the complexity here has to do with supporting input suspension.
+ * If the data source module demands suspension, we want to be able to back
+ * up to the start of the current MCU.  To do this, we copy state variables
+ * into local working storage, and update them back to the permanent
+ * storage only upon successful completion of an MCU.
+ *
+ * NOTE: All referenced figures are from
+ * Recommendation ITU-T T.81 (1992) | ISO/IEC 10918-1:1994.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdhuff.h"             /* Declarations shared with jdphuff.c */
+#include "jpegcomp.h"
+#include "jstdhuff.c"
+
+
+/*
+ * Expanded entropy decoder object for Huffman decoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  /* These fields are loaded into local variables at start of each MCU.
+   * In case of suspension, we exit WITHOUT updating them.
+   */
+  bitread_perm_state bitstate;  /* Bit buffer at start of MCU */
+  savable_state saved;          /* Other state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;  /* MCUs left in this restart interval */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  d_derived_tbl *dc_derived_tbls[NUM_HUFF_TBLS];
+  d_derived_tbl *ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Precalculated info set up by start_pass for use in decode_mcu: */
+
+  /* Pointers to derived tables to be used for each block within an MCU */
+  d_derived_tbl *dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  d_derived_tbl *ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  /* Whether we care about the DC and AC coefficient values for each block */
+  boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
+  boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
+} huff_entropy_decoder;
+
+typedef huff_entropy_decoder *huff_entropy_ptr;
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass_huff_decoder(j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr)cinfo->entropy;
+  int ci, blkn, dctbl, actbl;
+  d_derived_tbl **pdtbl;
+  jpeg_component_info *compptr;
+
+  /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+   * This ought to be an error condition, but we make it a warning because
+   * there are some baseline files out there with all zeroes in these bytes.
+   */
+  if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2 - 1 ||
+      cinfo->Ah != 0 || cinfo->Al != 0)
+    WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    /* Compute derived values for Huffman tables */
+    /* We may do this more than once for a table, but it's not expensive */
+    pdtbl = (d_derived_tbl **)(entropy->dc_derived_tbls) + dctbl;
+    jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl, pdtbl);
+    pdtbl = (d_derived_tbl **)(entropy->ac_derived_tbls) + actbl;
+    jpeg_make_d_derived_tbl(cinfo, FALSE, actbl, pdtbl);
+    /* Initialize DC predictions to 0 */
+    entropy->saved.last_dc_val[ci] = 0;
+  }
+
+  /* Precalculate decoding info for each block in an MCU of this scan */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    /* Precalculate which table to use for each block */
+    entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
+    entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
+    /* Decide whether we really care about the coefficient values */
+    if (compptr->component_needed) {
+      entropy->dc_needed[blkn] = TRUE;
+      /* we don't need the ACs if producing a 1/8th-size image */
+      entropy->ac_needed[blkn] = (compptr->_DCT_scaled_size > 1);
+    } else {
+      entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
+    }
+  }
+
+  /* Initialize bitread state variables */
+  entropy->bitstate.bits_left = 0;
+  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
+  entropy->pub.insufficient_data = FALSE;
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jdphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_d_derived_tbl(j_decompress_ptr cinfo, boolean isDC, int tblno,
+                        d_derived_tbl **pdtbl)
+{
+  JHUFF_TBL *htbl;
+  d_derived_tbl *dtbl;
+  int p, i, l, si, numsymbols;
+  int lookbits, ctr;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (d_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  sizeof(d_derived_tbl));
+  dtbl = *pdtbl;
+  dtbl->pub = htbl;             /* fill in back link */
+
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int)htbl->bits[l];
+    if (i < 0 || p + i > 256)   /* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char)l;
+  }
+  huffsize[p] = 0;
+  numsymbols = p;
+
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int)huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((JLONG)code) >= (((JLONG)1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+
+  /* Figure F.15: generate decoding tables for bit-sequential decoding */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    if (htbl->bits[l]) {
+      /* valoffset[l] = huffval[] index of 1st symbol of code length l,
+       * minus the minimum code of length l
+       */
+      dtbl->valoffset[l] = (JLONG)p - (JLONG)huffcode[p];
+      p += htbl->bits[l];
+      dtbl->maxcode[l] = huffcode[p - 1]; /* maximum code of length l */
+    } else {
+      dtbl->maxcode[l] = -1;    /* -1 if no codes of this length */
+    }
+  }
+  dtbl->valoffset[17] = 0;
+  dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
+
+  /* Compute lookahead tables to speed up decoding.
+   * First we set all the table entries to 0, indicating "too long";
+   * then we iterate through the Huffman codes that are short enough and
+   * fill in all the entries that correspond to bit sequences starting
+   * with that code.
+   */
+
+  for (i = 0; i < (1 << HUFF_LOOKAHEAD); i++)
+    dtbl->lookup[i] = (HUFF_LOOKAHEAD + 1) << HUFF_LOOKAHEAD;
+
+  p = 0;
+  for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
+    for (i = 1; i <= (int)htbl->bits[l]; i++, p++) {
+      /* l = current code's length, p = its index in huffcode[] & huffval[]. */
+      /* Generate left-justified code followed by all possible bit sequences */
+      lookbits = huffcode[p] << (HUFF_LOOKAHEAD - l);
+      for (ctr = 1 << (HUFF_LOOKAHEAD - l); ctr > 0; ctr--) {
+        dtbl->lookup[lookbits] = (l << HUFF_LOOKAHEAD) | htbl->huffval[p];
+        lookbits++;
+      }
+    }
+  }
+
+  /* Validate symbols as being reasonable.
+   * For AC tables, we make no check, but accept all byte values 0..255.
+   * For DC tables, we require the symbols to be in range 0..15.
+   * (Tighter bounds could be applied depending on the data depth and mode,
+   * but this is sufficient to ensure safe decoding.)
+   */
+  if (isDC) {
+    for (i = 0; i < numsymbols; i++) {
+      int sym = htbl->huffval[i];
+      if (sym < 0 || sym > 15)
+        ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    }
+  }
+}
+
+
+/*
+ * Out-of-line code for bit fetching (shared with jdphuff.c).
+ * See jdhuff.h for info about usage.
+ * Note: current values of get_buffer and bits_left are passed as parameters,
+ * but are returned in the corresponding fields of the state struct.
+ *
+ * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
+ * of get_buffer to be used.  (On machines with wider words, an even larger
+ * buffer could be used.)  However, on some machines 32-bit shifts are
+ * quite slow and take time proportional to the number of places shifted.
+ * (This is true with most PC compilers, for instance.)  In this case it may
+ * be a win to set MIN_GET_BITS to the minimum value of 15.  This reduces the
+ * average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
+ */
+
+#ifdef SLOW_SHIFT_32
+#define MIN_GET_BITS  15        /* minimum allowable value */
+#else
+#define MIN_GET_BITS  (BIT_BUF_SIZE - 7)
+#endif
+
+
+GLOBAL(boolean)
+jpeg_fill_bit_buffer(bitread_working_state *state,
+                     register bit_buf_type get_buffer, register int bits_left,
+                     int nbits)
+/* Load up the bit buffer to a depth of at least nbits */
+{
+  /* Copy heavily used state fields into locals (hopefully registers) */
+  register const JOCTET *next_input_byte = state->next_input_byte;
+  register size_t bytes_in_buffer = state->bytes_in_buffer;
+  j_decompress_ptr cinfo = state->cinfo;
+
+  /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
+  /* (It is assumed that no request will be for more than that many bits.) */
+  /* We fail to do so only if we hit a marker or are forced to suspend. */
+
+  if (cinfo->unread_marker == 0) {      /* cannot advance past a marker */
+    while (bits_left < MIN_GET_BITS) {
+      register int c;
+
+      /* Attempt to read a byte */
+      if (bytes_in_buffer == 0) {
+        if (!(*cinfo->src->fill_input_buffer) (cinfo))
+          return FALSE;
+        next_input_byte = cinfo->src->next_input_byte;
+        bytes_in_buffer = cinfo->src->bytes_in_buffer;
+      }
+      bytes_in_buffer--;
+      c = *next_input_byte++;
+
+      /* If it's 0xFF, check and discard stuffed zero byte */
+      if (c == 0xFF) {
+        /* Loop here to discard any padding FF's on terminating marker,
+         * so that we can save a valid unread_marker value.  NOTE: we will
+         * accept multiple FF's followed by a 0 as meaning a single FF data
+         * byte.  This data pattern is not valid according to the standard.
+         */
+        do {
+          if (bytes_in_buffer == 0) {
+            if (!(*cinfo->src->fill_input_buffer) (cinfo))
+              return FALSE;
+            next_input_byte = cinfo->src->next_input_byte;
+            bytes_in_buffer = cinfo->src->bytes_in_buffer;
+          }
+          bytes_in_buffer--;
+          c = *next_input_byte++;
+        } while (c == 0xFF);
+
+        if (c == 0) {
+          /* Found FF/00, which represents an FF data byte */
+          c = 0xFF;
+        } else {
+          /* Oops, it's actually a marker indicating end of compressed data.
+           * Save the marker code for later use.
+           * Fine point: it might appear that we should save the marker into
+           * bitread working state, not straight into permanent state.  But
+           * once we have hit a marker, we cannot need to suspend within the
+           * current MCU, because we will read no more bytes from the data
+           * source.  So it is OK to update permanent state right away.
+           */
+          cinfo->unread_marker = c;
+          /* See if we need to insert some fake zero bits. */
+          goto no_more_bytes;
+        }
+      }
+
+      /* OK, load c into get_buffer */
+      get_buffer = (get_buffer << 8) | c;
+      bits_left += 8;
+    } /* end while */
+  } else {
+no_more_bytes:
+    /* We get here if we've read the marker that terminates the compressed
+     * data segment.  There should be enough bits in the buffer register
+     * to satisfy the request; if so, no problem.
+     */
+    if (nbits > bits_left) {
+      /* Uh-oh.  Report corrupted data to user and stuff zeroes into
+       * the data stream, so that we can produce some kind of image.
+       * We use a nonvolatile flag to ensure that only one warning message
+       * appears per data segment.
+       */
+      if (!cinfo->entropy->insufficient_data) {
+        WARNMS(cinfo, JWRN_HIT_MARKER);
+        cinfo->entropy->insufficient_data = TRUE;
+      }
+      /* Fill the buffer with zero bits */
+      get_buffer <<= MIN_GET_BITS - bits_left;
+      bits_left = MIN_GET_BITS;
+    }
+  }
+
+  /* Unload the local registers */
+  state->next_input_byte = next_input_byte;
+  state->bytes_in_buffer = bytes_in_buffer;
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  return TRUE;
+}
+
+
+/* Macro version of the above, which performs much better but does not
+   handle markers.  We have to hand off any blocks with markers to the
+   slower routines. */
+
+#define GET_BYTE { \
+  register int c0, c1; \
+  c0 = *buffer++; \
+  c1 = *buffer; \
+  /* Pre-execute most common case */ \
+  get_buffer = (get_buffer << 8) | c0; \
+  bits_left += 8; \
+  if (c0 == 0xFF) { \
+    /* Pre-execute case of FF/00, which represents an FF data byte */ \
+    buffer++; \
+    if (c1 != 0) { \
+      /* Oops, it's actually a marker indicating end of compressed data. */ \
+      cinfo->unread_marker = c1; \
+      /* Back out pre-execution and fill the buffer with zero bits */ \
+      buffer -= 2; \
+      get_buffer &= ~0xFF; \
+    } \
+  } \
+}
+
+#if SIZEOF_SIZE_T == 8 || defined(_WIN64) || (defined(__x86_64__) && defined(__ILP32__))
+
+/* Pre-fetch 48 bytes, because the holding register is 64-bit */
+#define FILL_BIT_BUFFER_FAST \
+  if (bits_left <= 16) { \
+    GET_BYTE GET_BYTE GET_BYTE GET_BYTE GET_BYTE GET_BYTE \
+  }
+
+#else
+
+/* Pre-fetch 16 bytes, because the holding register is 32-bit */
+#define FILL_BIT_BUFFER_FAST \
+  if (bits_left <= 16) { \
+    GET_BYTE GET_BYTE \
+  }
+
+#endif
+
+
+/*
+ * Out-of-line code for Huffman code decoding.
+ * See jdhuff.h for info about usage.
+ */
+
+GLOBAL(int)
+jpeg_huff_decode(bitread_working_state *state,
+                 register bit_buf_type get_buffer, register int bits_left,
+                 d_derived_tbl *htbl, int min_bits)
+{
+  register int l = min_bits;
+  register JLONG code;
+
+  /* HUFF_DECODE has determined that the code is at least min_bits */
+  /* bits long, so fetch that many bits in one swoop. */
+
+  CHECK_BIT_BUFFER(*state, l, return -1);
+  code = GET_BITS(l);
+
+  /* Collect the rest of the Huffman code one bit at a time. */
+  /* This is per Figure F.16. */
+
+  while (code > htbl->maxcode[l]) {
+    code <<= 1;
+    CHECK_BIT_BUFFER(*state, 1, return -1);
+    code |= GET_BITS(1);
+    l++;
+  }
+
+  /* Unload the local registers */
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  /* With garbage input we may reach the sentinel value l = 17. */
+
+  if (l > 16) {
+    WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
+    return 0;                   /* fake a zero as the safest result */
+  }
+
+  return htbl->pub->huffval[(int)(code + htbl->valoffset[l])];
+}
+
+
+/*
+ * Figure F.12: extend sign bit.
+ * On some machines, a shift and add will be faster than a table lookup.
+ */
+
+#define AVOID_TABLES
+#ifdef AVOID_TABLES
+
+#define NEG_1  ((unsigned int)-1)
+#define HUFF_EXTEND(x, s) \
+  ((x) + ((((x) - (1 << ((s) - 1))) >> 31) & (((NEG_1) << (s)) + 1)))
+
+#else
+
+#define HUFF_EXTEND(x, s) \
+  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
+
+static const int extend_test[16] = {   /* entry n is 2**(n-1) */
+  0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+  0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000
+};
+
+static const int extend_offset[16] = { /* entry n is (-1 << n) + 1 */
+  0, ((-1) << 1) + 1, ((-1) << 2) + 1, ((-1) << 3) + 1, ((-1) << 4) + 1,
+  ((-1) << 5) + 1, ((-1) << 6) + 1, ((-1) << 7) + 1, ((-1) << 8) + 1,
+  ((-1) << 9) + 1, ((-1) << 10) + 1, ((-1) << 11) + 1, ((-1) << 12) + 1,
+  ((-1) << 13) + 1, ((-1) << 14) + 1, ((-1) << 15) + 1
+};
+
+#endif /* AVOID_TABLES */
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ * Returns FALSE if must suspend.
+ */
+
+LOCAL(boolean)
+process_restart(j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr)cinfo->entropy;
+  int ci;
+
+  /* Throw away any unused bits remaining in bit buffer; */
+  /* include any full bytes in next_marker's count of discarded bytes */
+  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
+  entropy->bitstate.bits_left = 0;
+
+  /* Advance past the RSTn marker */
+  if (!(*cinfo->marker->read_restart_marker) (cinfo))
+    return FALSE;
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+    entropy->saved.last_dc_val[ci] = 0;
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->pub.insufficient_data = FALSE;
+
+  return TRUE;
+}
+
+
+#if defined(__has_feature)
+#if __has_feature(undefined_behavior_sanitizer)
+__attribute__((no_sanitize("signed-integer-overflow"),
+               no_sanitize("unsigned-integer-overflow")))
+#endif
+#endif
+LOCAL(boolean)
+decode_mcu_slow(j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr)cinfo->entropy;
+  BITREAD_STATE_VARS;
+  int blkn;
+  savable_state state;
+  /* Outer loop handles each block in the MCU */
+
+  /* Load up working state */
+  BITREAD_LOAD_STATE(cinfo, entropy->bitstate);
+  state = entropy->saved;
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    JBLOCKROW block = MCU_data ? MCU_data[blkn] : NULL;
+    d_derived_tbl *dctbl = entropy->dc_cur_tbls[blkn];
+    d_derived_tbl *actbl = entropy->ac_cur_tbls[blkn];
+    register int s, k, r;
+
+    /* Decode a single block's worth of coefficients */
+
+    /* Section F.2.2.1: decode the DC coefficient difference */
+    HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
+    if (s) {
+      CHECK_BIT_BUFFER(br_state, s, return FALSE);
+      r = GET_BITS(s);
+      s = HUFF_EXTEND(r, s);
+    }
+
+    if (entropy->dc_needed[blkn]) {
+      /* Convert DC difference to actual value, update last_dc_val */
+      int ci = cinfo->MCU_membership[blkn];
+      /* Certain malformed JPEG images produce repeated DC coefficient
+       * differences of 2047 or -2047, which causes state.last_dc_val[ci] to
+       * grow until it overflows or underflows a 32-bit signed integer.  This
+       * behavior is, to the best of our understanding, innocuous, and it is
+       * unclear how to work around it without potentially affecting
+       * performance.  Thus, we (hopefully temporarily) suppress UBSan integer
+       * overflow errors for this function and decode_mcu_fast().
+       */
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      if (block) {
+        /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
+        (*block)[0] = (JCOEF)s;
+      }
+    }
+
+    if (entropy->ac_needed[blkn] && block) {
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* Since zeroes are skipped, output area must be cleared beforehand */
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
+
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          CHECK_BIT_BUFFER(br_state, s, return FALSE);
+          r = GET_BITS(s);
+          s = HUFF_EXTEND(r, s);
+          /* Output coefficient in natural (dezigzagged) order.
+           * Note: the extra entries in jpeg_natural_order[] will save us
+           * if k >= DCTSIZE2, which could happen if the data is corrupted.
+           */
+          (*block)[jpeg_natural_order[k]] = (JCOEF)s;
+        } else {
+          if (r != 15)
+            break;
+          k += 15;
+        }
+      }
+
+    } else {
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* In this path we just discard the values */
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
+
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          CHECK_BIT_BUFFER(br_state, s, return FALSE);
+          DROP_BITS(s);
+        } else {
+          if (r != 15)
+            break;
+          k += 15;
+        }
+      }
+    }
+  }
+
+  /* Completed MCU, so update state */
+  BITREAD_SAVE_STATE(cinfo, entropy->bitstate);
+  entropy->saved = state;
+  return TRUE;
+}
+
+
+#if defined(__has_feature)
+#if __has_feature(undefined_behavior_sanitizer)
+__attribute__((no_sanitize("signed-integer-overflow"),
+               no_sanitize("unsigned-integer-overflow")))
+#endif
+#endif
+LOCAL(boolean)
+decode_mcu_fast(j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr)cinfo->entropy;
+  BITREAD_STATE_VARS;
+  JOCTET *buffer;
+  int blkn;
+  savable_state state;
+  /* Outer loop handles each block in the MCU */
+
+  /* Load up working state */
+  BITREAD_LOAD_STATE(cinfo, entropy->bitstate);
+  buffer = (JOCTET *)br_state.next_input_byte;
+  state = entropy->saved;
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    JBLOCKROW block = MCU_data ? MCU_data[blkn] : NULL;
+    d_derived_tbl *dctbl = entropy->dc_cur_tbls[blkn];
+    d_derived_tbl *actbl = entropy->ac_cur_tbls[blkn];
+    register int s, k, r, l;
+
+    HUFF_DECODE_FAST(s, l, dctbl);
+    if (s) {
+      FILL_BIT_BUFFER_FAST
+      r = GET_BITS(s);
+      s = HUFF_EXTEND(r, s);
+    }
+
+    if (entropy->dc_needed[blkn]) {
+      int ci = cinfo->MCU_membership[blkn];
+      /* Refer to the comment in decode_mcu_slow() regarding the supression of
+       * a UBSan integer overflow error in this line of code.
+       */
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      if (block)
+        (*block)[0] = (JCOEF)s;
+    }
+
+    if (entropy->ac_needed[blkn] && block) {
+
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE_FAST(s, l, actbl);
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          FILL_BIT_BUFFER_FAST
+          r = GET_BITS(s);
+          s = HUFF_EXTEND(r, s);
+          (*block)[jpeg_natural_order[k]] = (JCOEF)s;
+        } else {
+          if (r != 15) break;
+          k += 15;
+        }
+      }
+
+    } else {
+
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE_FAST(s, l, actbl);
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          FILL_BIT_BUFFER_FAST
+          DROP_BITS(s);
+        } else {
+          if (r != 15) break;
+          k += 15;
+        }
+      }
+    }
+  }
+
+  if (cinfo->unread_marker != 0) {
+    cinfo->unread_marker = 0;
+    return FALSE;
+  }
+
+  br_state.bytes_in_buffer -= (buffer - br_state.next_input_byte);
+  br_state.next_input_byte = buffer;
+  BITREAD_SAVE_STATE(cinfo, entropy->bitstate);
+  entropy->saved = state;
+  return TRUE;
+}
+
+
+/*
+ * Decode and return one MCU's worth of Huffman-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER.
+ * (Wholesale zeroing is usually a little faster than retail...)
+ *
+ * Returns FALSE if data source requested suspension.  In that case no
+ * changes have been made to permanent state.  (Exception: some output
+ * coefficients may already have been assigned.  This is harmless for
+ * this module, since we'll just re-assign them on the next call.)
+ */
+
+#define BUFSIZE  (DCTSIZE2 * 8)
+
+METHODDEF(boolean)
+decode_mcu(j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr)cinfo->entropy;
+  int usefast = 1;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (!process_restart(cinfo))
+        return FALSE;
+    usefast = 0;
+  }
+
+  if (cinfo->src->bytes_in_buffer < BUFSIZE * (size_t)cinfo->blocks_in_MCU ||
+      cinfo->unread_marker != 0)
+    usefast = 0;
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (!entropy->pub.insufficient_data) {
+
+    if (usefast) {
+      if (!decode_mcu_fast(cinfo, MCU_data)) goto use_slow;
+    } else {
+use_slow:
+      if (!decode_mcu_slow(cinfo, MCU_data)) return FALSE;
+    }
+
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  if (cinfo->restart_interval)
+    entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * Module initialization routine for Huffman entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_huff_decoder(j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  /* Motion JPEG frames typically do not include the Huffman tables if they
+     are the default tables.  Thus, if the tables are not set by the time
+     the Huffman decoder is initialized (usually within the body of
+     jpeg_start_decompress()), we set them to default values. */
+  std_huff_tables((j_common_ptr)cinfo);
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(huff_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *)entropy;
+  entropy->pub.start_pass = start_pass_huff_decoder;
+  entropy->pub.decode_mcu = decode_mcu;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+  }
+}