diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-19 00:47:55 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-19 00:47:55 +0000 |
commit | 26a029d407be480d791972afb5975cf62c9360a6 (patch) | |
tree | f435a8308119effd964b339f76abb83a57c29483 /media/libjpeg/jdphuff.c | |
parent | Initial commit. (diff) | |
download | firefox-26a029d407be480d791972afb5975cf62c9360a6.tar.xz firefox-26a029d407be480d791972afb5975cf62c9360a6.zip |
Adding upstream version 124.0.1.upstream/124.0.1
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | media/libjpeg/jdphuff.c | 679 |
1 files changed, 679 insertions, 0 deletions
diff --git a/media/libjpeg/jdphuff.c b/media/libjpeg/jdphuff.c new file mode 100644 index 0000000000..9680ebcbd0 --- /dev/null +++ b/media/libjpeg/jdphuff.c @@ -0,0 +1,679 @@ +/* + * jdphuff.c + * + * This file was part of the Independent JPEG Group's software: + * Copyright (C) 1995-1997, Thomas G. Lane. + * libjpeg-turbo Modifications: + * Copyright (C) 2015-2016, 2018-2022, D. R. Commander. + * For conditions of distribution and use, see the accompanying README.ijg + * file. + * + * This file contains Huffman entropy decoding routines for progressive JPEG. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + * + * NOTE: All referenced figures are from + * Recommendation ITU-T T.81 (1992) | ISO/IEC 10918-1:1994. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdhuff.h" /* Declarations shared with jdhuff.c */ +#include <limits.h> + + +#ifdef D_PROGRESSIVE_SUPPORTED + +/* + * Expanded entropy decoder object for progressive Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl *derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl *ac_derived_tbl; /* active table during an AC scan */ +} phuff_entropy_decoder; + +typedef phuff_entropy_decoder *phuff_entropy_ptr; + +/* Forward declarations */ +METHODDEF(boolean) decode_mcu_DC_first(j_decompress_ptr cinfo, + JBLOCKROW *MCU_data); +METHODDEF(boolean) decode_mcu_AC_first(j_decompress_ptr cinfo, + JBLOCKROW *MCU_data); +METHODDEF(boolean) decode_mcu_DC_refine(j_decompress_ptr cinfo, + JBLOCKROW *MCU_data); +METHODDEF(boolean) decode_mcu_AC_refine(j_decompress_ptr cinfo, + JBLOCKROW *MCU_data); + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_phuff_decoder(j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + boolean is_DC_band, bad; + int ci, coefi, tbl; + d_derived_tbl **pdtbl; + int *coef_bit_ptr, *prev_coef_bit_ptr; + jpeg_component_info *compptr; + + is_DC_band = (cinfo->Ss == 0); + + /* Validate scan parameters */ + bad = FALSE; + if (is_DC_band) { + if (cinfo->Se != 0) + bad = TRUE; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2) + bad = TRUE; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + bad = TRUE; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Al != cinfo->Ah - 1) + bad = TRUE; + } + if (cinfo->Al > 13) /* need not check for < 0 */ + bad = TRUE; + /* Arguably the maximum Al value should be less than 13 for 8-bit precision, + * but the spec doesn't say so, and we try to be liberal about what we + * accept. Note: large Al values could result in out-of-range DC + * coefficients during early scans, leading to bizarre displays due to + * overflows in the IDCT math. But we won't crash. + */ + if (bad) + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int cindex = cinfo->cur_comp_info[ci]->component_index; + coef_bit_ptr = &cinfo->coef_bits[cindex][0]; + prev_coef_bit_ptr = &cinfo->coef_bits[cindex + cinfo->num_components][0]; + if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = MIN(cinfo->Ss, 1); coefi <= MAX(cinfo->Se, 9); coefi++) { + if (cinfo->input_scan_number > 1) + prev_coef_bit_ptr[coefi] = coef_bit_ptr[coefi]; + else + prev_coef_bit_ptr[coefi] = 0; + } + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (is_DC_band) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (is_DC_band) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (is_DC_band) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + pdtbl = (d_derived_tbl **)(entropy->derived_tbls) + tbl; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, pdtbl); + } + } else { + tbl = compptr->ac_tbl_no; + pdtbl = (d_derived_tbl **)(entropy->derived_tbls) + tbl; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, pdtbl); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->pub.insufficient_data = FALSE; + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and add will be faster than a table lookup. + */ + +#define AVOID_TABLES +#ifdef AVOID_TABLES + +#define NEG_1 ((unsigned)-1) +#define HUFF_EXTEND(x, s) \ + ((x) < (1 << ((s) - 1)) ? (x) + (((NEG_1) << (s)) + 1) : (x)) + +#else + +#define HUFF_EXTEND(x, s) \ + ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) + +static const int extend_test[16] = { /* entry n is 2**(n-1) */ + 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, + 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 +}; + +static const int extend_offset[16] = { /* entry n is (-1 << n) + 1 */ + 0, ((-1) << 1) + 1, ((-1) << 2) + 1, ((-1) << 3) + 1, ((-1) << 4) + 1, + ((-1) << 5) + 1, ((-1) << 6) + 1, ((-1) << 7) + 1, ((-1) << 8) + 1, + ((-1) << 9) + 1, ((-1) << 10) + 1, ((-1) << 11) + 1, ((-1) << 12) + 1, + ((-1) << 13) + 1, ((-1) << 14) + 1, ((-1) << 15) + 1 +}; + +#endif /* AVOID_TABLES */ + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart(j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (!(*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->pub.insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first(j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl *tbl; + jpeg_component_info *compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (!process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (!entropy->pub.insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + state = entropy->saved; + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + if ((state.last_dc_val[ci] >= 0 && + s > INT_MAX - state.last_dc_val[ci]) || + (state.last_dc_val[ci] < 0 && s < INT_MIN - state.last_dc_val[ci])) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF)LEFT_SHIFT(s, Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + entropy->saved = state; + } + + /* Account for restart interval (no-op if not using restarts) */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first(j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + int Se = cinfo->Se; + int Al = cinfo->Al; + register int s, k, r; + unsigned int EOBRUN; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl *tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (!process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (!entropy->pub.insufficient_data) { + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN > 0) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[jpeg_natural_order[k]] = (JCOEF)LEFT_SHIFT(s, Al); + } else { + if (r == 15) { /* ZRL */ + k += 15; /* skip 15 zeroes in band */ + } else { /* EOBr, run length is 2^r + appended bits */ + EOBRUN = 1 << r; + if (r) { /* EOBr, r > 0 */ + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + } + EOBRUN--; /* this band is processed at this moment */ + break; /* force end-of-band */ + } + } + } + + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine(j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int blkn; + JBLOCKROW block; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (!process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + (*block)[0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + + /* Account for restart interval (no-op if not using restarts) */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine(j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr)cinfo->entropy; + int Se = cinfo->Se; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int m1 = (NEG_1) << cinfo->Al; /* -1 in the bit position being coded */ + register int s, k, r; + unsigned int EOBRUN; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl *tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (!process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (!entropy->pub.insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + jpeg_natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += (JCOEF)p1; + else + *thiscoef += (JCOEF)m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = jpeg_natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF)s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + } + } + + if (EOBRUN > 0) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + for (; k <= Se; k++) { + thiscoef = *block + jpeg_natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += (JCOEF)p1; + else + *thiscoef += (JCOEF)m1; + } + } + } + } + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz > 0) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Module initialization routine for progressive Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_phuff_decoder(j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy; + int *coef_bit_ptr; + int ci, i; + + entropy = (phuff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE, + sizeof(phuff_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *)entropy; + entropy->pub.start_pass = start_pass_phuff_decoder; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + + /* Create progression status table */ + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * DCTSIZE2 * + sizeof(int)); + coef_bit_ptr = &cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; +} + +#endif /* D_PROGRESSIVE_SUPPORTED */ |