summaryrefslogtreecommitdiffstats
path: root/tools/profiler/public/ProfilerThreadRegistrationData.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-19 00:47:55 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-19 00:47:55 +0000
commit26a029d407be480d791972afb5975cf62c9360a6 (patch)
treef435a8308119effd964b339f76abb83a57c29483 /tools/profiler/public/ProfilerThreadRegistrationData.h
parentInitial commit. (diff)
downloadfirefox-26a029d407be480d791972afb5975cf62c9360a6.tar.xz
firefox-26a029d407be480d791972afb5975cf62c9360a6.zip
Adding upstream version 124.0.1.upstream/124.0.1
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/profiler/public/ProfilerThreadRegistrationData.h')
-rw-r--r--tools/profiler/public/ProfilerThreadRegistrationData.h537
1 files changed, 537 insertions, 0 deletions
diff --git a/tools/profiler/public/ProfilerThreadRegistrationData.h b/tools/profiler/public/ProfilerThreadRegistrationData.h
new file mode 100644
index 0000000000..7c14290e4c
--- /dev/null
+++ b/tools/profiler/public/ProfilerThreadRegistrationData.h
@@ -0,0 +1,537 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+// This header contains classes that hold data related to thread profiling:
+// Data members are stored `protected` in `ThreadRegistrationData`.
+// Non-virtual sub-classes of ProfilerThreadRegistrationData provide layers of
+// public accessors to subsets of the data. Each level builds on the previous
+// one and adds further access to more data, but always with the appropriate
+// guards where necessary.
+// These classes have protected constructors, so only some trusted classes
+// `ThreadRegistration` and `ThreadRegistry` will be able to construct them, and
+// then give limited access depending on who asks (the owning thread or another
+// one), and how much data they actually need.
+//
+// The hierarchy is, from base to most derived:
+// - ThreadRegistrationData
+// - ThreadRegistrationUnlockedConstReader
+// - ThreadRegistrationUnlockedConstReaderAndAtomicRW
+// - ThreadRegistrationUnlockedRWForLockedProfiler
+// - ThreadRegistrationUnlockedReaderAndAtomicRWOnThread
+// - ThreadRegistrationLockedRWFromAnyThread
+// - ThreadRegistrationLockedRWOnThread
+// - ThreadRegistration::EmbeddedData (actual data member in ThreadRegistration)
+//
+// Tech detail: These classes need to be a single hierarchy so that
+// `ThreadRegistration` can contain the most-derived class, and from there can
+// publish references to base classes without relying on Undefined Behavior.
+// (It's not allowed to have some object and give a reference to a sub-class,
+// unless that object was *really* constructed as that sub-class at least, even
+// if that sub-class only adds member functions!)
+// And where appropriate, these references will come along with the required
+// lock.
+
+#ifndef ProfilerThreadRegistrationData_h
+#define ProfilerThreadRegistrationData_h
+
+#include "js/ProfilingFrameIterator.h"
+#include "js/ProfilingStack.h"
+#include "mozilla/Atomics.h"
+#include "mozilla/BaseProfilerDetail.h"
+#include "mozilla/MemoryReporting.h"
+#include "mozilla/ProfilerThreadPlatformData.h"
+#include "mozilla/ProfilerThreadRegistrationInfo.h"
+#include "nsCOMPtr.h"
+#include "nsIThread.h"
+
+class ProfiledThreadData;
+class PSAutoLock;
+struct JSContext;
+
+// Enum listing which profiling features are active for a single thread.
+enum class ThreadProfilingFeatures : uint32_t {
+ // The thread is not being profiled at all (either the profiler is not
+ // running, or this thread is not examined during profiling.)
+ NotProfiled = 0u,
+
+ // Single features, binary exclusive. May be `Combine()`d.
+ CPUUtilization = 1u << 0,
+ Sampling = 1u << 1,
+ Markers = 1u << 2,
+
+ // All possible features. Usually used as a mask to see if any feature is
+ // active at a given time.
+ Any = CPUUtilization | Sampling | Markers
+};
+
+// Binary OR of one of more ThreadProfilingFeatures, to mix all arguments.
+template <typename... Ts>
+[[nodiscard]] constexpr ThreadProfilingFeatures Combine(
+ ThreadProfilingFeatures a1, Ts... as) {
+ static_assert((true && ... &&
+ std::is_same_v<std::remove_cv_t<std::remove_reference_t<Ts>>,
+ ThreadProfilingFeatures>));
+ return static_cast<ThreadProfilingFeatures>(
+ (static_cast<std::underlying_type_t<ThreadProfilingFeatures>>(a1) | ... |
+ static_cast<std::underlying_type_t<ThreadProfilingFeatures>>(as)));
+}
+
+// Binary AND of one of more ThreadProfilingFeatures, to find features common to
+// all arguments.
+template <typename... Ts>
+[[nodiscard]] constexpr ThreadProfilingFeatures Intersect(
+ ThreadProfilingFeatures a1, Ts... as) {
+ static_assert((true && ... &&
+ std::is_same_v<std::remove_cv_t<std::remove_reference_t<Ts>>,
+ ThreadProfilingFeatures>));
+ return static_cast<ThreadProfilingFeatures>(
+ (static_cast<std::underlying_type_t<ThreadProfilingFeatures>>(a1) & ... &
+ static_cast<std::underlying_type_t<ThreadProfilingFeatures>>(as)));
+}
+
+// Are there features in common between the two given sets?
+// Mostly useful to test if any of a set of features is present in another set.
+template <typename... Ts>
+[[nodiscard]] constexpr bool DoFeaturesIntersect(ThreadProfilingFeatures a1,
+ ThreadProfilingFeatures a2) {
+ return Intersect(a1, a2) != ThreadProfilingFeatures::NotProfiled;
+}
+
+namespace mozilla::profiler {
+
+// All data members related to thread profiling are stored here.
+// See derived classes below, which give limited unlocked/locked read/write
+// access in different situations, and will be available through
+// ThreadRegistration and ThreadRegistry.
+class ThreadRegistrationData {
+ public:
+ // No public accessors here. See derived classes for accessors, and
+ // Get.../With... functions for who can use these accessors.
+
+ size_t SizeOfExcludingThis(MallocSizeOf aMallocSizeOf) const {
+ // Not including data that is not fully owned here.
+ return 0;
+ }
+
+ size_t SizeOfIncludingThis(MallocSizeOf aMallocSizeOf) const {
+ return aMallocSizeOf(this) + SizeOfExcludingThis(aMallocSizeOf);
+ }
+
+ static constexpr size_t MAX_JS_FRAMES = 1024;
+ using JsFrame = JS::ProfilingFrameIterator::Frame;
+ using JsFrameBuffer = JsFrame[MAX_JS_FRAMES];
+
+ // `protected` to allow derived classes to read all data members.
+ protected:
+ ThreadRegistrationData(const char* aName, const void* aStackTop);
+
+#ifdef DEBUG
+ // Destructor only used to check invariants.
+ ~ThreadRegistrationData() {
+ MOZ_ASSERT((mProfilingFeatures != ThreadProfilingFeatures::NotProfiled) ==
+ !!mProfiledThreadData);
+ MOZ_ASSERT(!mProfiledThreadData,
+ "mProfiledThreadData pointer should have been reset before "
+ "~ThreadRegistrationData");
+ }
+#endif // DEBUG
+
+ // Permanent thread information.
+ // Set at construction, read from anywhere, moved-from at destruction.
+ ThreadRegistrationInfo mInfo;
+
+ // Contains profiler labels and JS frames.
+ // Deep-written on thread only, deep-read from thread and suspended thread.
+ ProfilingStack mProfilingStack;
+
+ // In practice, only read from thread and suspended thread.
+ PlatformData mPlatformData;
+
+ // Only read from thread and suspended thread.
+ const void* const mStackTop;
+
+ // Written from thread, read from thread and suspended thread.
+ nsCOMPtr<nsIThread> mThread;
+
+ // If this is a JS thread, this is its JSContext, which is required for any
+ // JS sampling.
+ // Written from thread, read from thread and suspended thread.
+ JSContext* mJSContext = nullptr;
+
+ // If mJSContext is not null AND the thread is being profiled, this points at
+ // the start of a JsFrameBuffer to be used for on-thread synchronous sampling.
+ JsFrame* mJsFrameBuffer = nullptr;
+
+ // The profiler needs to start and stop JS sampling of JS threads at various
+ // times. However, the JS engine can only do the required actions on the
+ // JS thread itself ("on-thread"), not from another thread ("off-thread").
+ // Therefore, we have the following two-step process.
+ //
+ // - The profiler requests (on-thread or off-thread) that the JS sampling be
+ // started/stopped, by changing mJSSampling to the appropriate REQUESTED
+ // state.
+ //
+ // - The relevant JS thread polls (on-thread) for changes to mJSSampling.
+ // When it sees a REQUESTED state, it performs the appropriate actions to
+ // actually start/stop JS sampling, and changes mJSSampling out of the
+ // REQUESTED state.
+ //
+ // The state machine is as follows.
+ //
+ // INACTIVE --> ACTIVE_REQUESTED
+ // ^ ^ |
+ // | _/ |
+ // | _/ |
+ // | / |
+ // | v v
+ // INACTIVE_REQUESTED <-- ACTIVE
+ //
+ // The polling is done in the following two ways.
+ //
+ // - Via the interrupt callback mechanism; the JS thread must call
+ // profiler_js_interrupt_callback() from its own interrupt callback.
+ // This is how sampling must be started/stopped for threads where the
+ // request was made off-thread.
+ //
+ // - When {Start,Stop}JSSampling() is called on-thread, we can immediately
+ // follow it with a PollJSSampling() call to avoid the delay between the
+ // two steps. Likewise, setJSContext() calls PollJSSampling().
+ //
+ // One non-obvious thing about all this: these JS sampling requests are made
+ // on all threads, even non-JS threads. mContext needs to also be set (via
+ // setJSContext(), which can only happen for JS threads) for any JS sampling
+ // to actually happen.
+ //
+ enum {
+ INACTIVE = 0,
+ ACTIVE_REQUESTED = 1,
+ ACTIVE = 2,
+ INACTIVE_REQUESTED = 3,
+ } mJSSampling = INACTIVE;
+
+ uint32_t mJSFlags = 0;
+
+ // Flags to conveniently track various JS instrumentations.
+ enum class JSInstrumentationFlags {
+ StackSampling = 0x1,
+ Allocations = 0x2,
+ };
+
+ [[nodiscard]] bool JSAllocationsEnabled() const {
+ return mJSFlags & uint32_t(JSInstrumentationFlags::Allocations);
+ }
+
+ // The following members may be modified from another thread.
+ // They need to be atomic, because LockData() does not prevent reads from
+ // the owning thread.
+
+ // mSleep tracks whether the thread is sleeping, and if so, whether it has
+ // been previously observed. This is used for an optimization: in some
+ // cases, when a thread is asleep, we duplicate the previous sample, which
+ // is cheaper than taking a new sample.
+ //
+ // mSleep is atomic because it is accessed from multiple threads.
+ //
+ // - It is written only by this thread, via setSleeping() and setAwake().
+ //
+ // - It is read by SamplerThread::Run().
+ //
+ // There are two cases where racing between threads can cause an issue.
+ //
+ // - If CanDuplicateLastSampleDueToSleep() returns false but that result is
+ // invalidated before being acted upon, we will take a full sample
+ // unnecessarily. This is additional work but won't cause any correctness
+ // issues. (In actual fact, this case is impossible. In order to go from
+ // CanDuplicateLastSampleDueToSleep() returning false to it returning true
+ // requires an intermediate call to it in order for mSleep to go from
+ // SLEEPING_NOT_OBSERVED to SLEEPING_OBSERVED.)
+ //
+ // - If CanDuplicateLastSampleDueToSleep() returns true but that result is
+ // invalidated before being acted upon -- i.e. the thread wakes up before
+ // DuplicateLastSample() is called -- we will duplicate the previous
+ // sample. This is inaccurate, but only slightly... we will effectively
+ // treat the thread as having slept a tiny bit longer than it really did.
+ //
+ // This latter inaccuracy could be avoided by moving the
+ // CanDuplicateLastSampleDueToSleep() check within the thread-freezing code,
+ // e.g. the section where Tick() is called. But that would reduce the
+ // effectiveness of the optimization because more code would have to be run
+ // before we can tell that duplication is allowed.
+ //
+ static const int AWAKE = 0;
+ static const int SLEEPING_NOT_OBSERVED = 1;
+ static const int SLEEPING_OBSERVED = 2;
+ // Read&written from thread and suspended thread.
+ Atomic<int> mSleep{AWAKE};
+ Atomic<uint64_t> mThreadCpuTimeInNsAtLastSleep{0};
+
+#ifdef NIGHTLY_BUILD
+ // The first wake is the thread creation.
+ Atomic<uint64_t, MemoryOrdering::Relaxed> mWakeCount{1};
+ mutable baseprofiler::detail::BaseProfilerMutex mRecordWakeCountMutex;
+ mutable uint64_t mAlreadyRecordedWakeCount = 0;
+ mutable uint64_t mAlreadyRecordedCpuTimeInMs = 0;
+#endif
+
+ // Is this thread currently being profiled, and with which features?
+ // Written from profiler, read from any thread.
+ // Invariant: `!!mProfilingFeatures == !!mProfiledThreadData` (set together.)
+ Atomic<ThreadProfilingFeatures, MemoryOrdering::Relaxed> mProfilingFeatures{
+ ThreadProfilingFeatures::NotProfiled};
+
+ // If the profiler is active and this thread is selected for profiling, this
+ // points at the relevant ProfiledThreadData.
+ // Fully controlled by the profiler.
+ // Invariant: `!!mProfilingFeatures == !!mProfiledThreadData` (set together).
+ ProfiledThreadData* mProfiledThreadData = nullptr;
+};
+
+// Accessing const data from any thread.
+class ThreadRegistrationUnlockedConstReader : public ThreadRegistrationData {
+ public:
+ [[nodiscard]] const ThreadRegistrationInfo& Info() const { return mInfo; }
+
+ [[nodiscard]] const PlatformData& PlatformDataCRef() const {
+ return mPlatformData;
+ }
+
+ [[nodiscard]] const void* StackTop() const { return mStackTop; }
+
+ protected:
+ ThreadRegistrationUnlockedConstReader(const char* aName,
+ const void* aStackTop)
+ : ThreadRegistrationData(aName, aStackTop) {}
+};
+
+// Accessing atomic data from any thread.
+class ThreadRegistrationUnlockedConstReaderAndAtomicRW
+ : public ThreadRegistrationUnlockedConstReader {
+ public:
+ [[nodiscard]] const ProfilingStack& ProfilingStackCRef() const {
+ return mProfilingStack;
+ }
+ [[nodiscard]] ProfilingStack& ProfilingStackRef() { return mProfilingStack; }
+
+ // Similar to `profiler_is_active()`, this atomic flag may become out-of-date.
+ // It should only be used as an indication to know whether this thread is
+ // probably being profiled (with some specific features), to avoid doing
+ // expensive operations otherwise. Edge cases:
+ // - This thread could get `NotProfiled`, but the profiler has just started,
+ // so some very early data may be missing. No real impact on profiling.
+ // - This thread could see profiled features, but the profiled has just
+ // stopped, so some some work will be done and then discarded when finally
+ // attempting to write to the buffer. No impact on profiling.
+ // - This thread could see profiled features, but the profiler will quickly
+ // stop and restart, so this thread will write information relevant to the
+ // previous profiling session. Very rare, and little impact on profiling.
+ [[nodiscard]] ThreadProfilingFeatures ProfilingFeatures() const {
+ return mProfilingFeatures;
+ }
+
+ // Call this whenever the current thread sleeps. Calling it twice in a row
+ // without an intervening setAwake() call is an error.
+ void SetSleeping() {
+ MOZ_ASSERT(mSleep == AWAKE);
+ mSleep = SLEEPING_NOT_OBSERVED;
+ }
+
+ // Call this whenever the current thread wakes. Calling it twice in a row
+ // without an intervening setSleeping() call is an error.
+ void SetAwake() {
+ MOZ_ASSERT(mSleep != AWAKE);
+ mSleep = AWAKE;
+#ifdef NIGHTLY_BUILD
+ ++mWakeCount;
+#endif
+ }
+
+ // Returns the CPU time used by the thread since the previous call to this
+ // method or since the thread was started if this is the first call.
+ uint64_t GetNewCpuTimeInNs() {
+ uint64_t newCpuTimeNs;
+ if (!GetCpuTimeSinceThreadStartInNs(&newCpuTimeNs, PlatformDataCRef())) {
+ newCpuTimeNs = 0;
+ }
+ uint64_t before = mThreadCpuTimeInNsAtLastSleep;
+ uint64_t result =
+ MOZ_LIKELY(newCpuTimeNs > before) ? newCpuTimeNs - before : 0;
+ mThreadCpuTimeInNsAtLastSleep = newCpuTimeNs;
+ return result;
+ }
+
+#ifdef NIGHTLY_BUILD
+ void RecordWakeCount() const;
+#endif
+
+ // This is called on every profiler restart. Put things that should happen
+ // at that time here.
+ void ReinitializeOnResume() {
+ // This is needed to cause an initial sample to be taken from sleeping
+ // threads that had been observed prior to the profiler stopping and
+ // restarting. Otherwise sleeping threads would not have any samples to
+ // copy forward while sleeping.
+ (void)mSleep.compareExchange(SLEEPING_OBSERVED, SLEEPING_NOT_OBSERVED);
+ }
+
+ // This returns true for the second and subsequent calls in each sleep
+ // cycle, so that the sampler can skip its full sampling and reuse the first
+ // asleep sample instead.
+ [[nodiscard]] bool CanDuplicateLastSampleDueToSleep() {
+ if (mSleep == AWAKE) {
+ return false;
+ }
+ if (mSleep.compareExchange(SLEEPING_NOT_OBSERVED, SLEEPING_OBSERVED)) {
+ return false;
+ }
+ return true;
+ }
+
+ [[nodiscard]] bool IsSleeping() const { return mSleep != AWAKE; }
+
+ protected:
+ ThreadRegistrationUnlockedConstReaderAndAtomicRW(const char* aName,
+ const void* aStackTop)
+ : ThreadRegistrationUnlockedConstReader(aName, aStackTop) {}
+};
+
+// Like above, with special PSAutoLock-guarded accessors.
+class ThreadRegistrationUnlockedRWForLockedProfiler
+ : public ThreadRegistrationUnlockedConstReaderAndAtomicRW {
+ public:
+ // IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT!
+ // Only add functions that take a `const PSAutoLock&` proof-of-lock.
+ // (Because there is no other lock.)
+
+ [[nodiscard]] const ProfiledThreadData* GetProfiledThreadData(
+ const PSAutoLock&) const {
+ return mProfiledThreadData;
+ }
+
+ [[nodiscard]] ProfiledThreadData* GetProfiledThreadData(const PSAutoLock&) {
+ return mProfiledThreadData;
+ }
+
+ protected:
+ ThreadRegistrationUnlockedRWForLockedProfiler(const char* aName,
+ const void* aStackTop)
+ : ThreadRegistrationUnlockedConstReaderAndAtomicRW(aName, aStackTop) {}
+};
+
+// Reading data, unlocked from the thread, or locked otherwise.
+// This data MUST only be written from the thread with lock (i.e., in
+// LockedRWOnThread through RWOnThreadWithLock.)
+class ThreadRegistrationUnlockedReaderAndAtomicRWOnThread
+ : public ThreadRegistrationUnlockedRWForLockedProfiler {
+ public:
+ // IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT! IMPORTANT!
+ // Non-atomic members read here MUST be written from LockedRWOnThread (to
+ // guarantee that they are only modified on this thread.)
+
+ [[nodiscard]] JSContext* GetJSContext() const { return mJSContext; }
+
+ protected:
+ ThreadRegistrationUnlockedReaderAndAtomicRWOnThread(const char* aName,
+ const void* aStackTop)
+ : ThreadRegistrationUnlockedRWForLockedProfiler(aName, aStackTop) {}
+};
+
+// Accessing locked data from the thread, or from any thread through the locked
+// profiler:
+
+// Like above, and profiler can also read&write mutex-protected members.
+class ThreadRegistrationLockedRWFromAnyThread
+ : public ThreadRegistrationUnlockedReaderAndAtomicRWOnThread {
+ public:
+ void SetProfilingFeaturesAndData(ThreadProfilingFeatures aProfilingFeatures,
+ ProfiledThreadData* aProfiledThreadData,
+ const PSAutoLock&);
+ void ClearProfilingFeaturesAndData(const PSAutoLock&);
+
+ // Not null when JSContext is not null AND this thread is being profiled.
+ // Points at the start of JsFrameBuffer.
+ [[nodiscard]] JsFrame* GetJsFrameBuffer() const { return mJsFrameBuffer; }
+
+ [[nodiscard]] const nsCOMPtr<nsIEventTarget> GetEventTarget() const {
+ return mThread;
+ }
+
+ void ResetMainThread(nsIThread* aThread) { mThread = aThread; }
+
+ // aDelay is the time the event that is currently running on the thread was
+ // queued before starting to run (if a PrioritizedEventQueue
+ // (i.e. MainThread), this will be 0 for any event at a lower priority
+ // than Input).
+ // aRunning is the time the event has been running. If no event is running
+ // these will both be TimeDuration() (i.e. 0). Both are out params, and are
+ // always set. Their initial value is discarded.
+ void GetRunningEventDelay(const TimeStamp& aNow, TimeDuration& aDelay,
+ TimeDuration& aRunning) {
+ if (mThread) { // can be null right at the start of a process
+ TimeStamp start;
+ mThread->GetRunningEventDelay(&aDelay, &start);
+ if (!start.IsNull()) {
+ // Note: the timestamp used here will be from when we started to
+ // suspend and sample the thread; which is also the timestamp
+ // associated with the sample.
+ aRunning = aNow - start;
+ return;
+ }
+ }
+ aDelay = TimeDuration();
+ aRunning = TimeDuration();
+ }
+
+ // Request that this thread start JS sampling. JS sampling won't actually
+ // start until a subsequent PollJSSampling() call occurs *and* mContext has
+ // been set.
+ void StartJSSampling(uint32_t aJSFlags) {
+ // This function runs on-thread or off-thread.
+
+ MOZ_RELEASE_ASSERT(mJSSampling == INACTIVE ||
+ mJSSampling == INACTIVE_REQUESTED);
+ mJSSampling = ACTIVE_REQUESTED;
+ mJSFlags = aJSFlags;
+ }
+
+ // Request that this thread stop JS sampling. JS sampling won't actually
+ // stop until a subsequent PollJSSampling() call occurs.
+ void StopJSSampling() {
+ // This function runs on-thread or off-thread.
+
+ MOZ_RELEASE_ASSERT(mJSSampling == ACTIVE ||
+ mJSSampling == ACTIVE_REQUESTED);
+ mJSSampling = INACTIVE_REQUESTED;
+ }
+
+ protected:
+ ThreadRegistrationLockedRWFromAnyThread(const char* aName,
+ const void* aStackTop)
+ : ThreadRegistrationUnlockedReaderAndAtomicRWOnThread(aName, aStackTop) {}
+};
+
+// Accessing data, locked, from the thread.
+// If any non-atomic data is readable from UnlockedReaderAndAtomicRWOnThread,
+// it must be written from here, and not in base classes: Since this data is
+// only written on the thread, it can be read from the same thread without
+// lock; but writing must be locked so that other threads can safely read it,
+// typically from LockedRWFromAnyThread.
+class ThreadRegistrationLockedRWOnThread
+ : public ThreadRegistrationLockedRWFromAnyThread {
+ public:
+ void SetJSContext(JSContext* aJSContext);
+ void ClearJSContext();
+
+ // Poll to see if JS sampling should be started/stopped.
+ void PollJSSampling();
+
+ public:
+ ThreadRegistrationLockedRWOnThread(const char* aName, const void* aStackTop)
+ : ThreadRegistrationLockedRWFromAnyThread(aName, aStackTop) {}
+};
+
+} // namespace mozilla::profiler
+
+#endif // ProfilerThreadRegistrationData_h