3 files changed, 807 insertions, 0 deletions
diff --git a/intl/unicharutil/tools/README.txt b/intl/unicharutil/tools/README.txt
new file mode 100644
index 0000000000..7295547f11
--- /dev/null
+++ b/intl/unicharutil/tools/README.txt
@@ -0,0 +1,3 @@
+Instructions for using these tools are on the Mozilla Wiki.
+
+https://wiki.mozilla.org/I18n:Updating_Unicode_version
diff --git a/intl/unicharutil/tools/genSpecialCasingData.pl b/intl/unicharutil/tools/genSpecialCasingData.pl
new file mode 100755
index 0000000000..9800688683
--- /dev/null
+++ b/intl/unicharutil/tools/genSpecialCasingData.pl
@@ -0,0 +1,309 @@
+#!/usr/bin/env perl
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# This tool is used to extract "special" (one-to-many) case mappings
+# into a form that can be used by nsTextRunTransformations.
+
+use strict;
+
+if ($#ARGV != 1) {
+  print <<__EOT;
+# Run this tool using a command line of the form
+#
+#     perl genSpecialCasingData.pl UnicodeData.txt SpecialCasing.txt
+#
+# The nsSpecialCasingData.cpp file will be written to standard output.
+#
+# This tool will also write up-to-date versions of the test files
+#     all-{upper,lower,title}.html
+# and corresponding -ref files in the current directory.
+#
+__EOT
+  exit 0;
+}
+
+my %allLower;
+my %allUpper;
+my %allTitle;
+my %compositions;
+my %gc;
+open FH, "< $ARGV[0]" or die "can't open $ARGV[0] (should be UnicodeData.txt)\n";
+while (<FH>) {
+  chomp;
+  my @fields = split /;/;
+  next if ($fields[1] =~ /</); # ignore ranges etc
+  my $usv = hex "0x$fields[0]";
+  $allUpper{$usv} = $fields[12] if $fields[12] ne '';
+  $allLower{$usv} = $fields[13] if $fields[13] ne '';
+  $allTitle{$usv} = $fields[14] if $fields[14] ne '';
+  $gc{$usv} = $fields[2];
+  # we only care about non-singleton canonical decomps
+  my $decomp = $fields[5];
+  next if $decomp eq '' or $decomp =~ /</ or not $decomp =~ / /;
+  $compositions{$decomp} = sprintf("%04X", $usv);
+}
+close FH;
+
+my %specialLower;
+my %specialUpper;
+my %specialTitle;
+my %charName;
+my @headerLines;
+open FH, "< $ARGV[1]" or die "can't open $ARGV[1] (should be SpecialCasing.txt)\n";
+while (<FH>) {
+  chomp;
+  m/#\s*(.+)$/;
+  my $comment = $1;
+  if ($comment =~ /^(SpecialCasing-|Date:)/) {
+    push @headerLines, $comment;
+    next;
+  }
+  s/#.*//;
+  s/;\s*$//;
+  next if $_ eq '';
+  my @fields = split /; */;
+  next unless (scalar @fields) == 4;
+  my $usv = hex "0x$fields[0]";
+  addIfSpecial(\%specialLower, $usv, $fields[1]);
+  addIfSpecial(\%specialTitle, $usv, $fields[2]);
+  addIfSpecial(\%specialUpper, $usv, $fields[3]);
+  $charName{$usv} = $comment;
+}
+close FH;
+
+print <<__END__;
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+/* Auto-generated from files in the Unicode Character Database
+   by genSpecialCasingData.pl - do not edit! */
+
+#include "nsSpecialCasingData.h"
+#include "mozilla/ArrayUtils.h" // for ArrayLength
+#include <stdlib.h>       // for bsearch
+
+__END__
+map { print "/* $_ */\n" } @headerLines;
+
+print <<__END__;
+
+using mozilla::unicode::MultiCharMapping;
+
+__END__
+
+printMappings('Lower', \%specialLower);
+printMappings('Upper', \%specialUpper);
+printMappings('Title', \%specialTitle);
+
+print <<__END__;
+static int CompareMCM(const void* aKey, const void* aElement)
+{
+  const uint32_t ch = *static_cast<const uint32_t*>(aKey);
+  const MultiCharMapping* mcm = static_cast<const MultiCharMapping*>(aElement);
+  return int(ch) - int(mcm->mOriginalChar);
+}
+
+#define MAKE_SPECIAL_CASE_ACCESSOR(which) \\
+  const MultiCharMapping* \\
+  Special##which(uint32_t aChar) \\
+  { \\
+    const void* p = bsearch(&aChar, CaseSpecials_##which, \\
+                            mozilla::ArrayLength(CaseSpecials_##which), \\
+                            sizeof(MultiCharMapping), CompareMCM); \\
+    return static_cast<const MultiCharMapping*>(p); \\
+  }
+
+namespace mozilla {
+namespace unicode {
+
+MAKE_SPECIAL_CASE_ACCESSOR(Lower)
+MAKE_SPECIAL_CASE_ACCESSOR(Upper)
+MAKE_SPECIAL_CASE_ACCESSOR(Title)
+
+} // namespace unicode
+} // namespace mozilla
+__END__
+
+addSpecialsTo(\%allLower, \%specialLower);
+addSpecialsTo(\%allUpper, \%specialUpper);
+addSpecialsTo(\%allTitle, \%specialTitle);
+
+my $testFont = "../fonts/dejavu-sans/DejaVuSans.ttf";
+genTest('lower', \%allLower);
+genTest('upper', \%allUpper);
+genTitleTest();
+
+sub printMappings {
+  my ($whichMapping, $hash) = @_;
+  print "static const MultiCharMapping CaseSpecials_${whichMapping}[] = {\n";
+  foreach my $key (sort { $a <=> $b } keys %$hash) {
+    my @chars = split(/ /, $hash->{$key});
+    printf "  { 0x%04x, {0x%04x, 0x%04x, 0x%04x} }, // %s\n", $key,
+           hex "0x0$chars[0]", hex "0x0$chars[1]", hex "0x0$chars[2]",
+           "$charName{$key}";
+  }
+  print "};\n\n";
+};
+
+sub addIfSpecial {
+  my ($hash, $usv, $mapping) = @_;
+  return unless $mapping =~ / /;
+  # only do compositions that start with the initial char
+  foreach (keys %compositions) {
+    $mapping =~ s/^$_/$compositions{$_}/;
+  }
+  $hash->{$usv} = $mapping;
+};
+
+sub addSpecialsTo {
+  my ($hash, $specials) = @_;
+  foreach my $key (keys %$specials) {
+    $hash->{$key} = $specials->{$key};
+  }
+};
+
+sub genTest {
+  my ($whichMapping, $hash) = @_;
+  open OUT, "> all-$whichMapping.html";
+  print OUT <<__END__;
+<!DOCTYPE html>
+<!-- GENERATED FILE, DO NOT EDIT -->
+<html>
+ <head>
+  <meta http-equiv="Content-type" content="text/html; charset=utf-8">
+  <style type="text/css">
+   \@font-face { font-family: foo; src: url($testFont); }
+   p { font-family: foo; font-size: 12px; text-transform: ${whichMapping}case; }
+  </style>
+ </head>
+ <body>
+  <p>
+__END__
+  foreach my $key (sort { $a <=> $b } keys %$hash) {
+    # Bug 1476304: we exclude Georgian letters U+10D0..10FF because of lack
+    # of widespread font support for the corresponding Mtavruli characters
+    # at this time (July 2018).
+    # This condition is to be removed once the major platforms ship with
+    # fonts that support U+1C90..1CBF.
+    my $skippedGeorgian = $whichMapping eq "upper" && $key >= 0x10D0 && $key <= 0x10FF;
+    print OUT "<!-- " if $skippedGeorgian;
+    printf OUT "&#x%04X;", $key;
+    print OUT " -->" if $skippedGeorgian;
+    print OUT " <!-- $charName{$key} -->" if exists $charName{$key};
+    print OUT " <!-- Temporarily skipped, see bug 1476304. -->" if $skippedGeorgian;
+    print OUT "\n";
+  }
+  print OUT <<__END__;
+  </p>
+ </body>
+</html>
+__END__
+  close OUT;
+
+  open OUT, "> all-$whichMapping-ref.html";
+  print OUT <<__END__;
+<!DOCTYPE html>
+<!-- GENERATED FILE, DO NOT EDIT -->
+<html>
+ <head>
+  <meta http-equiv="Content-type" content="text/html; charset=utf-8">
+  <style type="text/css">
+   \@font-face { font-family: foo; src: url($testFont); }
+   p { font-family: foo; font-size: 12px; }
+  </style>
+ </head>
+ <body>
+  <p>
+__END__
+  foreach my $key (sort { $a <=> $b } keys %$hash) {
+    # Bug 1476304: we exclude Georgian letters U+10D0..10FF because of lack
+    # of widespread font support for the corresponding Mtavruli characters
+    # at this time (July 2018).
+    # This condition is to be removed once the major platforms ship with
+    # fonts that support U+1C90..1CBF.
+    my $skippedGeorgian = $whichMapping eq "upper" && $key >= 0x10D0 && $key <= 0x10FF;
+    print OUT "<!-- " if $skippedGeorgian;
+    print OUT join('', map { sprintf("&#x%s;", $_) } split(/ /, $hash->{$key}));
+    print OUT " -->" if $skippedGeorgian;
+    print OUT " <!-- $charName{$key} -->" if exists $charName{$key};
+    print OUT " <!-- Temporarily skipped, see bug 1476304. -->" if $skippedGeorgian;
+    print OUT "\n";
+  }
+  print OUT <<__END__;
+  </p>
+ </body>
+</html>
+__END__
+  close OUT;
+};
+
+sub genTitleTest {
+  open OUT, "> all-title.html";
+  print OUT <<__END__;
+<!DOCTYPE html>
+<!-- GENERATED FILE, DO NOT EDIT -->
+<html>
+ <head>
+  <meta http-equiv="Content-type" content="text/html; charset=utf-8">
+  <style type="text/css">
+   \@font-face { font-family: foo; src: url($testFont); }
+   p { font-family: foo; text-transform: capitalize; }
+  </style>
+ </head>
+ <body>
+  <p>
+__END__
+  foreach my $key (sort { $a <=> $b } keys %allTitle) {
+    printf OUT "&#x%04X;x", $key;
+    print OUT " <!-- $charName{$key} -->" if exists $charName{$key};
+    print OUT "\n";
+  }
+  print OUT <<__END__;
+  </p>
+ </body>
+</html>
+__END__
+  close OUT;
+
+  open OUT, "> all-title-ref.html";
+  print OUT <<__END__;
+<!DOCTYPE html>
+<!-- GENERATED FILE, DO NOT EDIT -->
+<html>
+ <head>
+  <meta http-equiv="Content-type" content="text/html; charset=utf-8">
+  <style type="text/css">
+   \@font-face { font-family: foo; src: url($testFont); }
+   p { font-family: foo; }
+  </style>
+ </head>
+ <body>
+  <p>
+__END__
+  foreach my $key (sort { $a <=> $b } keys %allTitle) {
+    # capitalize is only applied to characters with GC=L* or N*...
+    if ($gc{$key} =~ /^[LN]/) {
+      # ...and those that are already uppercase are not transformed
+      if (exists $allUpper{$key}) {
+        print OUT join('', map { sprintf("&#x%s;", $_) } split(/ /, $allTitle{$key}));
+      } else {
+        printf OUT "&#x%04X;", $key;
+      }
+      print OUT "x";
+    } else {
+      printf OUT "&#x%04X;X", $key;
+    }
+    print OUT " <!-- $charName{$key} -->" if exists $charName{$key};
+    print OUT "\n";
+  }
+  print OUT <<__END__;
+  </p>
+ </body>
+</html>
+__END__
+  close OUT;
+};
diff --git a/intl/unicharutil/tools/genUnicodePropertyData.pl b/intl/unicharutil/tools/genUnicodePropertyData.pl
new file mode 100755
index 0000000000..f72f18f1ae
--- /dev/null
+++ b/intl/unicharutil/tools/genUnicodePropertyData.pl
@@ -0,0 +1,495 @@
+#!/usr/bin/env perl
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# This tool is used to prepare lookup tables of Unicode character properties
+# needed by gfx code to support text shaping operations. The properties are
+# read from the Unicode Character Database and compiled into multi-level arrays
+# for efficient lookup.
+#
+# Note that for most properties, we now rely on ICU; this tool and the tables
+# it generates are used only for a couple of properties not readily exposed
+# via ICU APIs.
+#
+# To regenerate the tables in nsUnicodePropertyData.cpp:
+#
+# (1) Download the current Unicode data files from
+#
+#         https://www.unicode.org/Public/UNIDATA/
+#
+#     NB: not all the files are actually needed; currently, we require
+#       - UnicodeData.txt
+#       - ReadMe.txt (to record version/date of the UCD)
+#       - Unihan_Variants.txt (from Unihan.zip)
+#     though this may change if we find a need for additional properties.
+#
+#     The Unicode data files listed above should be together in one directory.
+#
+#     We also require the file
+#        https://www.unicode.org/Public/security/latest/IdentifierStatus.txt
+#     This file should be in a sub-directory "security" immediately below the
+#        directory containing the other Unicode data files.
+#
+#     We also require the latest data file for UTR50, currently revision-17:
+#        https://www.unicode.org/Public/vertical/revision-17/VerticalOrientation-17.txt
+#     This file should be in a sub-directory "vertical" immediately below the
+#        directory containing the other Unicode data files.
+#
+#
+# (2) Run this tool using a command line of the form
+#
+#         perl genUnicodePropertyData.pl      \
+#                 /path/to/icu/common/unicode \
+#                 /path/to/UCD-directory
+#
+#     This will generate (or overwrite!) the files
+#
+#         nsUnicodePropertyData.cpp
+#         UnicodeScriptCodes.h
+#
+#     in the current directory.
+
+use strict;
+use List::Util qw(first);
+
+if ($#ARGV != 1) {
+    print <<__EOT;
+# Run this tool using a command line of the form
+#
+#     perl genUnicodePropertyData.pl      \\
+#             /path/to/icu/common/unicode \\
+#             /path/to/UCD-directory
+#
+# where icu/common/unicode is the directory containing ICU 'common' headers,
+# and UCD-directory is a directory containing the current Unicode Character
+# Database files (UnicodeData.txt, etc), available from
+# https://www.unicode.org/Public/UNIDATA/, with additional resources as
+# detailed in the source comments.
+#
+# This will generate (or overwrite!) the files
+#
+#     nsUnicodePropertyData.cpp
+#     UnicodeScriptCodes.h
+#
+# in the current directory.
+__EOT
+    exit 0;
+}
+
+my $ICU = $ARGV[0];
+my $UNICODE = $ARGV[1];
+
+my @scriptCodeToName;
+my @idtype;
+
+my $sc = -1;
+
+sub readIcuHeader
+{
+    my $file = shift;
+    open FH, "< $ICU/$file" or die "can't open ICU header $ICU/$file\n";
+    while (<FH>) {
+        # adjust for ICU vs UCD naming discrepancies
+        s/LANNA/TAI_THAM/;
+        s/MEITEI_MAYEK/MEETEI_MAYEK/;
+        s/ORKHON/OLD_TURKIC/;
+        s/MENDE/MENDE_KIKAKUI/;
+        s/SIGN_WRITING/SIGNWRITING/;
+        if (m|USCRIPT_([A-Z_]+)\s*=\s*([0-9]+),\s*/\*\s*([A-Z][a-z]{3})\s*\*/|) {
+            $sc = $2;
+            $scriptCodeToName[$sc] = $1;
+        }
+    }
+    close FH;
+}
+
+&readIcuHeader("uscript.h");
+
+die "didn't find ICU script codes\n" if $sc == -1;
+
+# We don't currently store these values; %idType is used only to check that
+# properties listed in the IdentifierType.txt file are recognized. We record
+# only the %mappedIdType values that are used by nsIDNService::isLabelSafe.
+# In practice, it would be sufficient for us to read only the last value in
+# IdentifierType.txt, but we check that all values are known so that we'll get
+# a warning if future updates introduce new ones, and can consider whether
+# they need to be taken into account.
+my %idType = (
+  "Not_Character"     => 0,
+  "Recommended"       => 1,
+  "Inclusion"         => 2,
+  "Uncommon_Use"      => 3,
+  "Technical"         => 4,
+  "Obsolete"          => 5,
+  "Aspirational"      => 6,
+  "Limited_Use"       => 7,
+  "Exclusion"         => 8,
+  "Not_XID"           => 9,
+  "Not_NFKC"          => 10,
+  "Default_Ignorable" => 11,
+  "Deprecated"        => 12
+);
+
+# These match the IdentifierType enum in UnicodeProperties.h.
+my %mappedIdType = (
+  "Restricted"   => 0,
+  "Allowed"      => 1
+);
+
+my %verticalOrientationCode = (
+  'U' => 0,  #   U - Upright, the same orientation as in the code charts
+  'R' => 1,  #   R - Rotated 90 degrees clockwise compared to the code charts
+  'Tu' => 2, #   Tu - Transformed typographically, with fallback to Upright
+  'Tr' => 3  #   Tr - Transformed typographically, with fallback to Rotated
+);
+
+# initialize default properties
+my @hanVariant;
+my @fullWidth;
+my @fullWidthInverse;
+my @verticalOrientation;
+for (my $i = 0; $i < 0x110000; ++$i) {
+    $hanVariant[$i] = 0;
+    $fullWidth[$i] = 0;
+    $fullWidthInverse[$i] = 0;
+    $verticalOrientation[$i] = 1; # default for unlisted codepoints is 'R'
+}
+
+# read ReadMe.txt
+my @versionInfo;
+open FH, "< $UNICODE/ReadMe.txt" or die "can't open Unicode ReadMe.txt file\n";
+while (<FH>) {
+    chomp;
+    push @versionInfo, $_;
+}
+close FH;
+
+# read UnicodeData.txt
+open FH, "< $UNICODE/UnicodeData.txt" or die "can't open UCD file UnicodeData.txt\n";
+while (<FH>) {
+    chomp;
+    my @fields = split /;/;
+    if ($fields[1] =~ /First/) {
+        my $first = hex "0x$fields[0]";
+        $_ = <FH>;
+        @fields = split /;/;
+        if ($fields[1] =~ /Last/) {
+            my $last = hex "0x$fields[0]";
+            do {
+                if ($fields[1] =~ /CJK/) {
+                  @hanVariant[$first] = 3;
+                }
+                $first++;
+            } while ($first <= $last);
+        } else {
+            die "didn't find Last code for range!\n";
+        }
+    } else {
+        my $usv = hex "0x$fields[0]";
+        if ($fields[1] =~ /CJK/) {
+          @hanVariant[$usv] = 3;
+        }
+        if ($fields[5] =~ /^<narrow>/) {
+          my $wideChar = hex(substr($fields[5], 9));
+          die "didn't expect supplementary-plane values here" if $usv > 0xffff || $wideChar > 0xffff;
+          $fullWidth[$usv] = $wideChar;
+          $fullWidthInverse[$wideChar] = $usv;
+        }
+        elsif ($fields[5] =~ /^<wide>/) {
+          my $narrowChar = hex(substr($fields[5], 7));
+          die "didn't expect supplementary-plane values here" if $usv > 0xffff || $narrowChar > 0xffff;
+          $fullWidth[$narrowChar] = $usv;
+          $fullWidthInverse[$usv] = $narrowChar;
+        }
+    }
+}
+close FH;
+
+# read IdentifierStatus.txt
+open FH, "< $UNICODE/security/IdentifierStatus.txt" or die "can't open UCD file IdentifierStatus.txt\n";
+push @versionInfo, "";
+while (<FH>) {
+  chomp;
+  s/\xef\xbb\xbf//;
+  push @versionInfo, $_;
+  last if /Date:/;
+}
+while (<FH>) {
+  if (m/([0-9A-F]{4,6})(?:\.\.([0-9A-F]{4,6}))*\s+;\s+Allowed/) {
+    my $start = hex "0x$1";
+    my $end = (defined $2) ? hex "0x$2" : $start;
+    for (my $i = $start; $i <= $end; ++$i) {
+      $idtype[$i] = $mappedIdType{'Allowed'};
+    }
+  }
+}
+close FH;
+
+open FH, "< $UNICODE/Unihan_Variants.txt" or die "can't open UCD file Unihan_Variants.txt (from Unihan.zip)\n";
+push @versionInfo, "";
+while (<FH>) {
+  chomp;
+  push @versionInfo, $_;
+  last if /Date:/;
+}
+my $savedusv = 0;
+my $hasTC = 0;
+my $hasSC = 0;
+while (<FH>) {
+  chomp;
+  if (m/U\+([0-9A-F]{4,6})\s+k([^ ]+)Variant/) {
+    my $usv = hex "0x$1";
+    if ($usv != $savedusv) {
+      unless ($savedusv == 0) {
+        if ($hasTC && !$hasSC) {
+          $hanVariant[$savedusv] = 1;
+        } elsif (!$hasTC && $hasSC) {
+          $hanVariant[$savedusv] = 2;
+        }
+      }
+      $savedusv = $usv;
+      $hasTC = 0;
+      $hasSC = 0;
+    }
+    if ($2 eq "Traditional") {
+      $hasTC = 1;
+    }
+    if ($2 eq "Simplified") {
+      $hasSC = 1;
+    }
+  } 
+}
+close FH;
+
+# read VerticalOrientation-17.txt
+open FH, "< $UNICODE/vertical/VerticalOrientation-17.txt" or die "can't open UTR50 data file VerticalOrientation-17.txt\n";
+push @versionInfo, "";
+while (<FH>) {
+    chomp;
+    push @versionInfo, $_;
+    last if /Date:/;
+}
+while (<FH>) {
+    chomp;
+    s/#.*//;
+    if (m/([0-9A-F]{4,6})(?:\.\.([0-9A-F]{4,6}))*\s*;\s*([^ ]+)/) {
+        my $vo = $3;
+        warn "unknown Vertical_Orientation code $vo"
+            unless exists $verticalOrientationCode{$vo};
+        $vo = $verticalOrientationCode{$vo};
+        my $start = hex "0x$1";
+        my $end = (defined $2) ? hex "0x$2" : $start;
+        for (my $i = $start; $i <= $end; ++$i) {
+            $verticalOrientation[$i] = $vo;
+        }
+    }
+}
+close FH;
+
+my $timestamp = gmtime();
+
+open DATA_TABLES, "> nsUnicodePropertyData.cpp" or die "unable to open nsUnicodePropertyData.cpp for output";
+
+my $licenseBlock = q[/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+/*
+ * Derived from the Unicode Character Database by genUnicodePropertyData.pl
+ *
+ * For Unicode terms of use, see http://www.unicode.org/terms_of_use.html
+ */
+];
+
+my $versionInfo = join("\n", @versionInfo);
+
+print DATA_TABLES <<__END;
+$licenseBlock
+/*
+ * Created on $timestamp from UCD data files with version info:
+ *
+
+$versionInfo
+
+ *
+ * * * * * This file contains MACHINE-GENERATED DATA, do not edit! * * * * *
+ */
+
+#include <stdint.h>
+#include "harfbuzz/hb.h"
+
+__END
+
+open HEADER, "> UnicodeScriptCodes.h" or die "unable to open UnicodeScriptCodes.h for output";
+
+print HEADER <<__END;
+$licenseBlock
+/*
+ * Created on $timestamp from UCD data files with version info:
+ *
+
+$versionInfo
+
+ *
+ * * * * * This file contains MACHINE-GENERATED DATA, do not edit! * * * * *
+ */
+
+#ifndef intl_components_UnicodeScriptCodes_h_
+#define intl_components_UnicodeScriptCodes_h_
+
+__END
+
+our $totalData = 0;
+
+sub sprintCharProps2_short
+{
+  my $usv = shift;
+  return sprintf("{%d,%d},",
+                 $verticalOrientation[$usv], $idtype[$usv]);
+}
+&genTables("CharProp2", "", "nsCharProps2", 9, 7, \&sprintCharProps2_short, 16, 1, 1);
+
+sub sprintHanVariants
+{
+  my $baseUsv = shift;
+  my $varShift = 0;
+  my $val = 0;
+  while ($varShift < 8) {
+    $val |= $hanVariant[$baseUsv++] << $varShift;
+    $varShift += 2;
+  }
+  return sprintf("0x%02x,", $val);
+}
+## Han Variant data currently unused but may be needed in future, see bug 857481
+## &genTables("HanVariant", "", "uint8_t", 9, 7, \&sprintHanVariants, 2, 1, 4);
+
+sub sprintFullWidth
+{
+  my $usv = shift;
+  return sprintf("0x%04x,", $fullWidth[$usv]);
+}
+&genTables("FullWidth", "", "uint16_t", 10, 6, \&sprintFullWidth, 0, 2, 1);
+
+sub sprintFullWidthInverse
+{
+  my $usv = shift;
+  return sprintf("0x%04x,", $fullWidthInverse[$usv]);
+}
+&genTables("FullWidthInverse", "", "uint16_t", 10, 6, \&sprintFullWidthInverse, 0, 2, 1);
+
+print STDERR "Total data = $totalData\n";
+
+sub genTables
+{
+  my ($prefix, $typedef, $type, $indexBits, $charBits, $func, $maxPlane, $bytesPerEntry, $charsPerEntry) = @_;
+
+  if ($typedef ne '') {
+    print HEADER "$typedef\n";
+  }
+
+  print DATA_TABLES "#define k${prefix}MaxPlane  $maxPlane\n";
+  print DATA_TABLES "#define k${prefix}IndexBits $indexBits\n";
+  print DATA_TABLES "#define k${prefix}CharBits  $charBits\n";
+
+  my $indexLen = 1 << $indexBits;
+  my $charsPerPage = 1 << $charBits;
+  my %charIndex = ();
+  my %pageMapIndex = ();
+  my @pageMap = ();
+  my @char = ();
+  
+  my $planeMap = "\x00" x $maxPlane;
+  foreach my $plane (0 .. $maxPlane) {
+    my $pageMap = "\x00" x $indexLen * 2;
+    foreach my $page (0 .. $indexLen - 1) {
+        my $charValues = "";
+        for (my $ch = 0; $ch < $charsPerPage; $ch += $charsPerEntry) {
+            my $usv = $plane * 0x10000 + $page * $charsPerPage + $ch;
+            $charValues .= &$func($usv);
+        }
+        chop $charValues;
+
+        unless (exists $charIndex{$charValues}) {
+            $charIndex{$charValues} = scalar keys %charIndex;
+            $char[$charIndex{$charValues}] = $charValues;
+        }
+        substr($pageMap, $page * 2, 2) = pack('S', $charIndex{$charValues});
+    }
+    
+    unless (exists $pageMapIndex{$pageMap}) {
+        $pageMapIndex{$pageMap} = scalar keys %pageMapIndex;
+        $pageMap[$pageMapIndex{$pageMap}] = $pageMap;
+    }
+    if ($plane > 0) {
+        substr($planeMap, $plane - 1, 1) = pack('C', $pageMapIndex{$pageMap});
+    }
+  }
+
+  if ($maxPlane) {
+    print DATA_TABLES "static const uint8_t s${prefix}Planes[$maxPlane] = {";
+    print DATA_TABLES join(',', map { sprintf("%d", $_) } unpack('C*', $planeMap));
+    print DATA_TABLES "};\n\n";
+  }
+
+  my $chCount = scalar @char;
+  my $pmBits = $chCount > 255 ? 16 : 8;
+  my $pmCount = scalar @pageMap;
+  if ($maxPlane == 0) {
+    die "there should only be one pageMap entry!" if $pmCount > 1;
+    print DATA_TABLES "static const uint${pmBits}_t s${prefix}Pages[$indexLen] = {\n";
+  } else {
+    print DATA_TABLES "static const uint${pmBits}_t s${prefix}Pages[$pmCount][$indexLen] = {\n";
+  }
+  for (my $i = 0; $i < scalar @pageMap; ++$i) {
+    print DATA_TABLES $maxPlane > 0 ? "  {" : "  ";
+    print DATA_TABLES join(',', map { sprintf("%d", $_) } unpack('S*', $pageMap[$i]));
+    print DATA_TABLES $maxPlane > 0 ? ($i < $#pageMap ? "},\n" : "}\n") : "\n";
+  }
+  print DATA_TABLES "};\n\n";
+
+  my $pageLen = $charsPerPage / $charsPerEntry;
+  print DATA_TABLES "static const $type s${prefix}Values[$chCount][$pageLen] = {\n";
+  for (my $i = 0; $i < scalar @char; ++$i) {
+    print DATA_TABLES "  {";
+    print DATA_TABLES $char[$i];
+    print DATA_TABLES $i < $#char ? "},\n" : "}\n";
+  }
+  print DATA_TABLES "};\n";
+
+  my $dataSize = $pmCount * $indexLen * $pmBits/8 +
+                 $chCount * $pageLen * $bytesPerEntry + 
+                 $maxPlane;
+  $totalData += $dataSize;
+
+  print STDERR "Data for $prefix = $dataSize\n";
+}
+
+print DATA_TABLES <<__END;
+/*
+ * * * * * This file contains MACHINE-GENERATED DATA, do not edit! * * * * *
+ */
+__END
+
+close DATA_TABLES;
+
+print HEADER "namespace mozilla::intl {\n";
+print HEADER "enum class Script : int16_t {\n";
+for (my $i = 0; $i < scalar @scriptCodeToName; ++$i) {
+  print HEADER "  ", $scriptCodeToName[$i], " = ", $i, ",\n";
+}
+print HEADER "\n  NUM_SCRIPT_CODES = ", scalar @scriptCodeToName, ",\n";
+print HEADER "\n  INVALID = -1\n";
+print HEADER "};\n";
+print HEADER "} // namespace mozilla::intl\n\n";
+
+print HEADER <<__END;
+#endif
+/*
+ * * * * * This file contains MACHINE-GENERATED DATA, do not edit! * * * * *
+ */
+__END
+
+close HEADER;
+