diff options
Diffstat (limited to '')
| -rw-r--r-- | netwerk/base/nsIRequest.idl | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/netwerk/base/nsIRequest.idl b/netwerk/base/nsIRequest.idl new file mode 100644 index 0000000000..8fa9462136 --- /dev/null +++ b/netwerk/base/nsIRequest.idl @@ -0,0 +1,332 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include "nsISupports.idl" + +%{ C++ +#include "nsString.h" +%} + +interface nsILoadGroup; + +typedef unsigned long nsLoadFlags; + +/** + * nsIRequest + */ +[scriptable, uuid(ef6bfbd2-fd46-48d8-96b7-9f8f0fd387fe)] +interface nsIRequest : nsISupports +{ + /** + * The name of the request. Often this is the URI of the request. + */ + readonly attribute AUTF8String name; + + /** + * Indicates whether the request is pending. nsIRequest::isPending is + * true when there is an outstanding asynchronous event that will make + * the request no longer be pending. Requests do not necessarily start + * out pending; in some cases, requests have to be explicitly initiated + * (e.g. nsIChannel implementations are only pending once asyncOpen + * returns successfully). + * + * Requests can become pending multiple times during their lifetime. + * + * @return TRUE if the request has yet to reach completion. + * @return FALSE if the request has reached completion (e.g., after + * OnStopRequest has fired). + * @note Suspended requests are still considered pending. + */ + boolean isPending(); + + /** + * The error status associated with the request. + */ + readonly attribute nsresult status; + + /** + * Cancels the current request. This will close any open input or + * output streams and terminate any async requests. Users should + * normally pass NS_BINDING_ABORTED, although other errors may also + * be passed. The error passed in will become the value of the + * status attribute. + * + * Implementations must not send any notifications (e.g. via + * nsIRequestObserver) synchronously from this function. Similarly, + * removal from the load group (if any) must also happen asynchronously. + * + * Requests that use nsIStreamListener must not call onDataAvailable + * anymore after cancel has been called. + * + * @param aStatus the reason for canceling this request. + * + * NOTE: most nsIRequest implementations expect aStatus to be a + * failure code; however, some implementations may allow aStatus to + * be a success code such as NS_OK. In general, aStatus should be + * a failure code. + */ + void cancel(in nsresult aStatus); + + /** + * Suspends the current request. This may have the effect of closing + * any underlying transport (in order to free up resources), although + * any open streams remain logically opened and will continue delivering + * data when the transport is resumed. + * + * Calling cancel() on a suspended request must not send any + * notifications (such as onstopRequest) until the request is resumed. + * + * NOTE: some implementations are unable to immediately suspend, and + * may continue to deliver events already posted to an event queue. In + * general, callers should be capable of handling events even after + * suspending a request. + */ + void suspend(); + + /** + * Resumes the current request. This may have the effect of re-opening + * any underlying transport and will resume the delivery of data to + * any open streams. + */ + void resume(); + + /** + * The load group of this request. While pending, the request is a + * member of the load group. It is the responsibility of the request + * to implement this policy. + */ + attribute nsILoadGroup loadGroup; + + /** + * The load flags of this request. Bits 0-15 are reserved. + * + * When added to a load group, this request's load flags are merged with + * the load flags of the load group. + */ + attribute nsLoadFlags loadFlags; + + /** + * Mask defining the bits reserved for nsIRequest LoadFlags + */ + const unsigned long LOAD_REQUESTMASK = 0xFFFF; + + /************************************************************************** + * Listed below are the various load flags which may be or'd together. + */ + + /** + * No special load flags: + */ + const unsigned long LOAD_NORMAL = 0; + + /** + * Do not deliver status notifications to the nsIProgressEventSink and + * do not block the loadgroup from completing (should this load belong to one). + * Note: Progress notifications will still be delivered. + */ + const unsigned long LOAD_BACKGROUND = 1 << 0; + + /** + * This flag marks the request as being made to load the data for an html + * <object> tag. This means that the LOAD_DOCUMENT_URI flag may be set after + * the channel has been provided with the MIME type. + */ + const unsigned long LOAD_HTML_OBJECT_DATA = 1 << 1; + + /** + * This flag marks the request as belonging to a document that requires access + * to the document.cookies API. + */ + const unsigned long LOAD_DOCUMENT_NEEDS_COOKIE = 1 << 2; + + cenum TRRMode : 32 { + TRR_DEFAULT_MODE = 0, + TRR_DISABLED_MODE = 1, + TRR_FIRST_MODE = 2, + TRR_ONLY_MODE = 3 + }; + + /** + * These methods encode/decode the TRR mode to/from the loadFlags. + * Helper methods Get/SetTRRModeImpl are provided so implementations don't + * need to duplicate code. + * + * Requests with TRR_DEFAULT_MODE will use the mode indicated by the pref + * - see network.trr.mode in all.js + * Requests with TRR_DISABLED_MODE will always use native DNS, even if the + * pref is set to mode3 (TRR-only). + * Requests with TRR_FIRST_MODE will first use TRR then fallback to regular + * DNS, unless TRR is disabled by setting the pref to mode5, parental + * control being enabled, or the domain being in the exclusion list. + * Requests with TRR_ONLY_MODE will only use TRR, unless not allowed by + * the same conditions mentioned above. + */ + nsIRequest_TRRMode getTRRMode(); + void setTRRMode(in nsIRequest_TRRMode mode); + + %{C++ + inline TRRMode GetTRRMode() { + TRRMode mode = TRR_DEFAULT_MODE; + GetTRRMode(&mode); + return mode; + } + + inline nsresult GetTRRModeImpl(nsIRequest::TRRMode* aTRRMode) { + NS_ENSURE_ARG_POINTER(aTRRMode); + nsLoadFlags flags = nsIRequest::LOAD_NORMAL; + nsresult rv = GetLoadFlags(&flags); + if (NS_FAILED(rv)) { + return rv; + } + *aTRRMode = static_cast<nsIRequest::TRRMode>( + (flags & nsIRequest::LOAD_TRR_MASK) >> 3); + return NS_OK; + } + + inline nsresult SetTRRModeImpl(nsIRequest::TRRMode aTRRMode) { + MOZ_ASSERT(aTRRMode <= 3, "invalid value"); + nsLoadFlags flags = nsIRequest::LOAD_NORMAL; + nsresult rv = GetLoadFlags(&flags); + if (NS_FAILED(rv)) { + return rv; + } + flags = (flags & ~nsIRequest::LOAD_TRR_MASK) | (aTRRMode << 3); + return SetLoadFlags(flags); + } + %} + + /** + * These two bits encode the TRR mode. + * Do not get/set manually, rather use the getTRRMode/setTRRMode methods. + */ + const unsigned long LOAD_TRR_MASK = (1 << 3) | (1 << 4); + const unsigned long LOAD_TRR_DISABLED_MODE = 1 << 3; + const unsigned long LOAD_TRR_FIRST_MODE = 1 << 4; + const unsigned long LOAD_TRR_ONLY_MODE = (1 << 3) | (1 << 4); + + void cancelWithReason(in nsresult aStatus, in ACString aReason); + attribute ACString canceledReason; + + %{C++ + protected: + nsCString mCanceledReason; + + public: + inline nsresult SetCanceledReasonImpl(const nsACString& aReason) { + if (mCanceledReason.IsEmpty()) { + mCanceledReason.Assign(aReason); + } + + return NS_OK; + } + + inline nsresult CancelWithReasonImpl(nsresult aStatus, + const nsACString& aReason) { + SetCanceledReasonImpl(aReason); + return Cancel(aStatus); + } + + inline nsresult GetCanceledReasonImpl(nsACString& aReason) { + aReason.Assign(mCanceledReason); + return NS_OK; + } + %} + + /** + * This is used for a temporary workaround for a web-compat issue. The flag is + * only set on CORS preflight request to allowed sending client certificates + * on a connection for an anonymous request. + */ + const long LOAD_ANONYMOUS_ALLOW_CLIENT_CERT = 1 << 5; + + /************************************************************************** + * The following flags control the flow of data into the cache. + */ + + /** + * This flag prevents caching of any kind. It does not, however, prevent + * cached content from being used to satisfy this request. + */ + const unsigned long INHIBIT_CACHING = 1 << 7; + + /** + * This flag prevents caching on disk (or other persistent media), which + * may be needed to preserve privacy. + */ + const unsigned long INHIBIT_PERSISTENT_CACHING = 1 << 8; + + /************************************************************************** + * The following flags control what happens when the cache contains data + * that could perhaps satisfy this request. They are listed in descending + * order of precidence. + */ + + /** + * Force an end-to-end download of content data from the origin server. + * This flag is used for a shift-reload. + */ + const unsigned long LOAD_BYPASS_CACHE = 1 << 9; + + /** + * Attempt to force a load from the cache, bypassing ALL validation logic + * (note: this is stronger than VALIDATE_NEVER, which still validates for + * certain conditions). + * + * If the resource is not present in cache, it will be loaded from the + * network. Combine this flag with LOAD_ONLY_FROM_CACHE if you wish to + * perform cache-only loads without validation checks. + * + * This flag is used when browsing via history. It is not recommended for + * normal browsing as it may likely violate reasonable assumptions made by + * the server and confuse users. + */ + const unsigned long LOAD_FROM_CACHE = 1 << 10; + + /** + * The following flags control the frequency of cached content validation + * when neither LOAD_BYPASS_CACHE or LOAD_FROM_CACHE are set. By default, + * cached content is automatically validated if necessary before reuse. + * + * VALIDATE_ALWAYS forces validation of any cached content independent of + * its expiration time (unless it is https with Cache-Control: immutable) + * + * VALIDATE_NEVER disables validation of cached content, unless it arrived + * with the "Cache: no-store" header, or arrived via HTTPS with the + * "Cache: no-cache" header. + * + * VALIDATE_ONCE_PER_SESSION disables validation of expired content, + * provided it has already been validated (at least once) since the start + * of this session. + * + * NOTE TO IMPLEMENTORS: + * These flags are intended for normal browsing, and they should therefore + * not apply to content that must be validated before each use. Consider, + * for example, a HTTP response with a "Cache-control: no-cache" header. + * According to RFC2616, this response must be validated before it can + * be taken from a cache. Breaking this requirement could result in + * incorrect and potentially undesirable side-effects. + */ + const unsigned long VALIDATE_ALWAYS = 1 << 11; + const unsigned long VALIDATE_NEVER = 1 << 12; + const unsigned long VALIDATE_ONCE_PER_SESSION = 1 << 13; + + /** + * When set, this flag indicates that no user-specific data should be added + * to the request when opened. This means that things like authorization + * tokens or cookie headers should not be added. + */ + const unsigned long LOAD_ANONYMOUS = 1 << 14; + + /** + * When set, this flag indicates that caches of network connections, + * particularly HTTP persistent connections, should not be used. + * Use this together with LOAD_INITIAL_DOCUMENT_URI as otherwise it has no + * effect. + */ + const unsigned long LOAD_FRESH_CONNECTION = 1 << 15; + + // Note that all flags are taken, the rest of the flags + // are located in nsIChannel and nsICachingChannel +}; |