diff options
Diffstat (limited to '')
-rw-r--r-- | third_party/aom/aom/aom_encoder.h | 1144 |
1 files changed, 1144 insertions, 0 deletions
diff --git a/third_party/aom/aom/aom_encoder.h b/third_party/aom/aom/aom_encoder.h new file mode 100644 index 0000000000..6a6254dafe --- /dev/null +++ b/third_party/aom/aom/aom_encoder.h @@ -0,0 +1,1144 @@ +/* + * Copyright (c) 2016, Alliance for Open Media. All rights reserved + * + * This source code is subject to the terms of the BSD 2 Clause License and + * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License + * was not distributed with this source code in the LICENSE file, you can + * obtain it at www.aomedia.org/license/software. If the Alliance for Open + * Media Patent License 1.0 was not distributed with this source code in the + * PATENTS file, you can obtain it at www.aomedia.org/license/patent. + */ +#ifndef AOM_AOM_AOM_ENCODER_H_ +#define AOM_AOM_AOM_ENCODER_H_ + +/*!\defgroup encoder Encoder Algorithm Interface + * \ingroup codec + * This abstraction allows applications using this encoder to easily support + * multiple video formats with minimal code duplication. This section describes + * the interface common to all encoders. + * @{ + */ + +/*!\file + * \brief Describes the encoder algorithm interface to applications. + * + * This file describes the interface between an application and a + * video encoder algorithm. + * + */ +#ifdef __cplusplus +extern "C" { +#endif + +#include "aom/aom_codec.h" // IWYU pragma: export +#include "aom/aom_external_partition.h" + +/*!\brief Current ABI version number + * + * \hideinitializer + * \internal + * If this file is altered in any way that changes the ABI, this value + * must be bumped. Examples include, but are not limited to, changing + * types, removing or reassigning enums, adding/removing/rearranging + * fields to structures + * + * Note: In the definition of AOM_ENCODER_ABI_VERSION, 3 is the value of + * AOM_EXT_PART_ABI_VERSION in libaom v3.2.0. The old value of + * AOM_EXT_PART_ABI_VERSION is used so as to not break the ABI version check in + * aom_codec_enc_init_ver() when an application compiled against libaom v3.2.0 + * passes the old value of AOM_ENCODER_ABI_VERSION to aom_codec_enc_init_ver(). + * The external partition API is still experimental. When it is declared stable, + * we will replace 3 with AOM_EXT_PART_ABI_VERSION in the definition of + * AOM_ENCODER_ABI_VERSION. + */ +#define AOM_ENCODER_ABI_VERSION \ + (10 + AOM_CODEC_ABI_VERSION + /*AOM_EXT_PART_ABI_VERSION=*/3) + +/*! \brief Encoder capabilities bitfield + * + * Each encoder advertises the capabilities it supports as part of its + * ::aom_codec_iface_t interface structure. Capabilities are extra + * interfaces or functionality, and are not required to be supported + * by an encoder. + * + * The available flags are specified by AOM_CODEC_CAP_* defines. + */ +#define AOM_CODEC_CAP_PSNR 0x10000 /**< Can issue PSNR packets */ + +/*! Can support input images at greater than 8 bitdepth. + */ +#define AOM_CODEC_CAP_HIGHBITDEPTH 0x40000 + +/*! \brief Initialization-time Feature Enabling + * + * Certain codec features must be known at initialization time, to allow + * for proper memory allocation. + * + * The available flags are specified by AOM_CODEC_USE_* defines. + */ +#define AOM_CODEC_USE_PSNR 0x10000 /**< Calculate PSNR on each frame */ +#define AOM_CODEC_USE_HIGHBITDEPTH 0x40000 /**< Use high bitdepth */ + +/*!\brief Generic fixed size buffer structure + * + * This structure is able to hold a reference to any fixed size buffer. + */ +typedef struct aom_fixed_buf { + void *buf; /**< Pointer to the data. Does NOT own the data! */ + size_t sz; /**< Length of the buffer, in chars */ +} aom_fixed_buf_t; /**< alias for struct aom_fixed_buf */ + +/*!\brief Error Resilient flags + * + * These flags define which error resilient features to enable in the + * encoder. The flags are specified through the + * aom_codec_enc_cfg::g_error_resilient variable. + */ +typedef uint32_t aom_codec_er_flags_t; +/*!\brief Improve resiliency against losses of whole frames */ +#define AOM_ERROR_RESILIENT_DEFAULT 0x1 + +/*!\brief Encoder output packet variants + * + * This enumeration lists the different kinds of data packets that can be + * returned by calls to aom_codec_get_cx_data(). Algorithms \ref MAY + * extend this list to provide additional functionality. + */ +enum aom_codec_cx_pkt_kind { + AOM_CODEC_CX_FRAME_PKT, /**< Compressed video frame */ + AOM_CODEC_STATS_PKT, /**< Two-pass statistics for this frame */ + AOM_CODEC_FPMB_STATS_PKT, /**< first pass mb statistics for this frame */ + AOM_CODEC_PSNR_PKT, /**< PSNR statistics for this frame */ + AOM_CODEC_CUSTOM_PKT = 256 /**< Algorithm extensions */ +}; + +/*!\brief Encoder output packet + * + * This structure contains the different kinds of output data the encoder + * may produce while compressing a frame. + */ +typedef struct aom_codec_cx_pkt { + enum aom_codec_cx_pkt_kind kind; /**< packet variant */ + union { + struct { + void *buf; /**< compressed data buffer */ + size_t sz; /**< length of compressed data */ + /*!\brief time stamp to show frame (in timebase units) */ + aom_codec_pts_t pts; + /*!\brief duration to show frame (in timebase units) */ + unsigned long duration; + aom_codec_frame_flags_t flags; /**< flags for this frame */ + /*!\brief the partition id defines the decoding order of the partitions. + * Only applicable when "output partition" mode is enabled. First + * partition has id 0.*/ + int partition_id; + /*!\brief size of the visible frame in this packet */ + size_t vis_frame_size; + } frame; /**< data for compressed frame packet */ + aom_fixed_buf_t twopass_stats; /**< data for two-pass packet */ + aom_fixed_buf_t firstpass_mb_stats; /**< first pass mb packet */ + struct aom_psnr_pkt { + unsigned int samples[4]; /**< Number of samples, total/y/u/v */ + uint64_t sse[4]; /**< sum squared error, total/y/u/v */ + double psnr[4]; /**< PSNR, total/y/u/v */ + /*!\brief Number of samples, total/y/u/v when + * input bit-depth < stream bit-depth.*/ + unsigned int samples_hbd[4]; + /*!\brief sum squared error, total/y/u/v when + * input bit-depth < stream bit-depth.*/ + uint64_t sse_hbd[4]; + /*!\brief PSNR, total/y/u/v when + * input bit-depth < stream bit-depth.*/ + double psnr_hbd[4]; + } psnr; /**< data for PSNR packet */ + aom_fixed_buf_t raw; /**< data for arbitrary packets */ + } data; /**< packet data */ +} aom_codec_cx_pkt_t; /**< alias for struct aom_codec_cx_pkt */ + +/*!\brief Rational Number + * + * This structure holds a fractional value. + */ +typedef struct aom_rational { + int num; /**< fraction numerator */ + int den; /**< fraction denominator */ +} aom_rational_t; /**< alias for struct aom_rational */ + +/*!\brief Multi-pass Encoding Pass + * + * AOM_RC_LAST_PASS is kept for backward compatibility. + * If passes is not given and pass==2, the codec will assume passes=2. + * For new code, it is recommended to use AOM_RC_SECOND_PASS and set + * the "passes" member to 2 via the key & val API for two-pass encoding. + */ +enum aom_enc_pass { + AOM_RC_ONE_PASS = 0, /**< Single pass mode */ + AOM_RC_FIRST_PASS = 1, /**< First pass of multi-pass mode */ + AOM_RC_SECOND_PASS = 2, /**< Second pass of multi-pass mode */ + AOM_RC_THIRD_PASS = 3, /**< Third pass of multi-pass mode */ + AOM_RC_LAST_PASS = 2, /**< Final pass of two-pass mode */ +}; + +/*!\brief Rate control mode */ +enum aom_rc_mode { + AOM_VBR, /**< Variable Bit Rate (VBR) mode */ + AOM_CBR, /**< Constant Bit Rate (CBR) mode */ + AOM_CQ, /**< Constrained Quality (CQ) mode */ + AOM_Q, /**< Constant Quality (Q) mode */ +}; + +/*!\brief Keyframe placement mode. + * + * This enumeration determines whether keyframes are placed automatically by + * the encoder or whether this behavior is disabled. Older releases of this + * SDK were implemented such that AOM_KF_FIXED meant keyframes were disabled. + * This name is confusing for this behavior, so the new symbols to be used + * are AOM_KF_AUTO and AOM_KF_DISABLED. + */ +enum aom_kf_mode { + AOM_KF_FIXED, /**< deprecated, implies AOM_KF_DISABLED */ + AOM_KF_AUTO, /**< Encoder determines optimal placement automatically */ + AOM_KF_DISABLED = 0 /**< Encoder does not place keyframes. */ +}; + +/*!\brief Frame super-resolution mode. */ +typedef enum { + /**< Frame super-resolution is disabled for all frames. */ + AOM_SUPERRES_NONE, + /**< All frames are coded at the specified scale and super-resolved. */ + AOM_SUPERRES_FIXED, + /**< All frames are coded at a random scale and super-resolved. */ + AOM_SUPERRES_RANDOM, + /**< Super-resolution scale for each frame is determined based on the q index + of that frame. */ + AOM_SUPERRES_QTHRESH, + /**< Full-resolution or super-resolution and the scale (in case of + super-resolution) are automatically selected for each frame. */ + AOM_SUPERRES_AUTO, +} aom_superres_mode; + +/*!\brief Encoder Config Options + * + * This type allows to enumerate and control flags defined for encoder control + * via config file at runtime. + */ +typedef struct cfg_options { + /*!\brief Indicate init by cfg file + * 0 or 1 + */ + unsigned int init_by_cfg_file; + /*!\brief Superblock size + * 0, 64 or 128 + */ + unsigned int super_block_size; + /*!\brief max partition size + * 8, 16, 32, 64, 128 + */ + unsigned int max_partition_size; + /*!\brief min partition size + * 8, 16, 32, 64, 128 + */ + unsigned int min_partition_size; + /*!\brief disable AB Shape partition type + * + */ + unsigned int disable_ab_partition_type; + /*!\brief disable rectangular partition type + * + */ + unsigned int disable_rect_partition_type; + /*!\brief disable 1:4/4:1 partition type + * + */ + unsigned int disable_1to4_partition_type; + /*!\brief disable flip and identity transform type + * + */ + unsigned int disable_flip_idtx; + /*!\brief disable CDEF filter + * + */ + unsigned int disable_cdef; + /*!\brief disable Loop Restoration Filter + * + */ + unsigned int disable_lr; + /*!\brief disable OBMC + * + */ + unsigned int disable_obmc; + /*!\brief disable Warped Motion + * + */ + unsigned int disable_warp_motion; + /*!\brief disable global motion + * + */ + unsigned int disable_global_motion; + /*!\brief disable dist weighted compound + * + */ + unsigned int disable_dist_wtd_comp; + /*!\brief disable diff weighted compound + * + */ + unsigned int disable_diff_wtd_comp; + /*!\brief disable inter/intra compound + * + */ + unsigned int disable_inter_intra_comp; + /*!\brief disable masked compound + * + */ + unsigned int disable_masked_comp; + /*!\brief disable one sided compound + * + */ + unsigned int disable_one_sided_comp; + /*!\brief disable Palette + * + */ + unsigned int disable_palette; + /*!\brief disable Intra Block Copy + * + */ + unsigned int disable_intrabc; + /*!\brief disable chroma from luma + * + */ + unsigned int disable_cfl; + /*!\brief disable intra smooth mode + * + */ + unsigned int disable_smooth_intra; + /*!\brief disable filter intra + * + */ + unsigned int disable_filter_intra; + /*!\brief disable dual filter + * + */ + unsigned int disable_dual_filter; + /*!\brief disable intra angle delta + * + */ + unsigned int disable_intra_angle_delta; + /*!\brief disable intra edge filter + * + */ + unsigned int disable_intra_edge_filter; + /*!\brief disable 64x64 transform + * + */ + unsigned int disable_tx_64x64; + /*!\brief disable smooth inter/intra + * + */ + unsigned int disable_smooth_inter_intra; + /*!\brief disable inter/inter wedge comp + * + */ + unsigned int disable_inter_inter_wedge; + /*!\brief disable inter/intra wedge comp + * + */ + unsigned int disable_inter_intra_wedge; + /*!\brief disable paeth intra + * + */ + unsigned int disable_paeth_intra; + /*!\brief disable trellis quantization + * + */ + unsigned int disable_trellis_quant; + /*!\brief disable ref frame MV + * + */ + unsigned int disable_ref_frame_mv; + /*!\brief use reduced reference frame set + * + */ + unsigned int reduced_reference_set; + /*!\brief use reduced transform type set + * + */ + unsigned int reduced_tx_type_set; +} cfg_options_t; + +/*!\brief Encoded Frame Flags + * + * This type indicates a bitfield to be passed to aom_codec_encode(), defining + * per-frame boolean values. By convention, bits common to all codecs will be + * named AOM_EFLAG_*, and bits specific to an algorithm will be named + * /algo/_eflag_*. The lower order 16 bits are reserved for common use. + */ +typedef long aom_enc_frame_flags_t; +/*!\brief Force this frame to be a keyframe */ +#define AOM_EFLAG_FORCE_KF (1 << 0) + +/*!\brief Encoder configuration structure + * + * This structure contains the encoder settings that have common representations + * across all codecs. This doesn't imply that all codecs support all features, + * however. + */ +typedef struct aom_codec_enc_cfg { + /* + * generic settings (g) + */ + + /*!\brief Algorithm specific "usage" value + * + * Algorithms may define multiple values for usage, which may convey the + * intent of how the application intends to use the stream. If this value + * is non-zero, consult the documentation for the codec to determine its + * meaning. + */ + unsigned int g_usage; + + /*!\brief Maximum number of threads to use + * + * For multi-threaded implementations, use no more than this number of + * threads. The codec may use fewer threads than allowed. The value + * 0 is equivalent to the value 1. + */ + unsigned int g_threads; + + /*!\brief Bitstream profile to use + * + * Some codecs support a notion of multiple bitstream profiles. Typically + * this maps to a set of features that are turned on or off. Often the + * profile to use is determined by the features of the intended decoder. + * Consult the documentation for the codec to determine the valid values + * for this parameter, or set to zero for a sane default. + */ + unsigned int g_profile; /**< profile of bitstream to use */ + + /*!\brief Width of the frame + * + * This value identifies the presentation resolution of the frame, + * in pixels. Note that the frames passed as input to the encoder must + * have this resolution. Frames will be presented by the decoder in this + * resolution, independent of any spatial resampling the encoder may do. + */ + unsigned int g_w; + + /*!\brief Height of the frame + * + * This value identifies the presentation resolution of the frame, + * in pixels. Note that the frames passed as input to the encoder must + * have this resolution. Frames will be presented by the decoder in this + * resolution, independent of any spatial resampling the encoder may do. + */ + unsigned int g_h; + + /*!\brief Max number of frames to encode + * + * If force video mode is off (the default) and g_limit is 1, the encoder + * will encode a still picture (still_picture is set to 1 in the sequence + * header OBU). If in addition full_still_picture_hdr is 0 (the default), + * the encoder will use a reduced header (reduced_still_picture_header is + * set to 1 in the sequence header OBU) for the still picture. + */ + unsigned int g_limit; + + /*!\brief Forced maximum width of the frame + * + * If this value is non-zero then it is used to force the maximum frame + * width written in write_sequence_header(). + */ + unsigned int g_forced_max_frame_width; + + /*!\brief Forced maximum height of the frame + * + * If this value is non-zero then it is used to force the maximum frame + * height written in write_sequence_header(). + */ + unsigned int g_forced_max_frame_height; + + /*!\brief Bit-depth of the codec + * + * This value identifies the bit_depth of the codec, + * Only certain bit-depths are supported as identified in the + * aom_bit_depth_t enum. + */ + aom_bit_depth_t g_bit_depth; + + /*!\brief Bit-depth of the input frames + * + * This value identifies the bit_depth of the input frames in bits. + * Note that the frames passed as input to the encoder must have + * this bit-depth. + */ + unsigned int g_input_bit_depth; + + /*!\brief Stream timebase units + * + * Indicates the smallest interval of time, in seconds, used by the stream. + * For fixed frame rate material, or variable frame rate material where + * frames are timed at a multiple of a given clock (ex: video capture), + * the \ref RECOMMENDED method is to set the timebase to the reciprocal + * of the frame rate (ex: 1001/30000 for 29.970 Hz NTSC). This allows the + * pts to correspond to the frame number, which can be handy. For + * re-encoding video from containers with absolute time timestamps, the + * \ref RECOMMENDED method is to set the timebase to that of the parent + * container or multimedia framework (ex: 1/1000 for ms, as in FLV). + */ + struct aom_rational g_timebase; + + /*!\brief Enable error resilient modes. + * + * The error resilient bitfield indicates to the encoder which features + * it should enable to take measures for streaming over lossy or noisy + * links. + */ + aom_codec_er_flags_t g_error_resilient; + + /*!\brief Multi-pass Encoding Mode + * + * This value should be set to the current phase for multi-pass encoding. + * For single pass, set to #AOM_RC_ONE_PASS. + */ + enum aom_enc_pass g_pass; + + /*!\brief Allow lagged encoding + * + * If set, this value allows the encoder to consume a number of input + * frames before producing output frames. This allows the encoder to + * base decisions for the current frame on future frames. This does + * increase the latency of the encoding pipeline, so it is not appropriate + * in all situations (ex: realtime encoding). + * + * Note that this is a maximum value -- the encoder may produce frames + * sooner than the given limit. Set this value to 0 to disable this + * feature. + */ + unsigned int g_lag_in_frames; + + /* + * rate control settings (rc) + */ + + /*!\brief Temporal resampling configuration, if supported by the codec. + * + * Temporal resampling allows the codec to "drop" frames as a strategy to + * meet its target data rate. This can cause temporal discontinuities in + * the encoded video, which may appear as stuttering during playback. This + * trade-off is often acceptable, but for many applications is not. It can + * be disabled in these cases. + * + * Note that not all codecs support this feature. All aom AVx codecs do. + * For other codecs, consult the documentation for that algorithm. + * + * This threshold is described as a percentage of the target data buffer. + * When the data buffer falls below this percentage of fullness, a + * dropped frame is indicated. Set the threshold to zero (0) to disable + * this feature. + */ + unsigned int rc_dropframe_thresh; + + /*!\brief Mode for spatial resampling, if supported by the codec. + * + * Spatial resampling allows the codec to compress a lower resolution + * version of the frame, which is then upscaled by the decoder to the + * correct presentation resolution. This increases visual quality at + * low data rates, at the expense of CPU time on the encoder/decoder. + */ + unsigned int rc_resize_mode; + + /*!\brief Frame resize denominator. + * + * The denominator for resize to use, assuming 8 as the numerator. + * + * Valid denominators are 8 - 16 for now. + */ + unsigned int rc_resize_denominator; + + /*!\brief Keyframe resize denominator. + * + * The denominator for resize to use, assuming 8 as the numerator. + * + * Valid denominators are 8 - 16 for now. + */ + unsigned int rc_resize_kf_denominator; + + /*!\brief Frame super-resolution scaling mode. + * + * Similar to spatial resampling, frame super-resolution integrates + * upscaling after the encode/decode process. Taking control of upscaling and + * using restoration filters should allow it to outperform normal resizing. + */ + aom_superres_mode rc_superres_mode; + + /*!\brief Frame super-resolution denominator. + * + * The denominator for superres to use. If fixed it will only change if the + * cumulative scale change over resizing and superres is greater than 1/2; + * this forces superres to reduce scaling. + * + * Valid denominators are 8 to 16. + * + * Used only by AOM_SUPERRES_FIXED. + */ + unsigned int rc_superres_denominator; + + /*!\brief Keyframe super-resolution denominator. + * + * The denominator for superres to use. If fixed it will only change if the + * cumulative scale change over resizing and superres is greater than 1/2; + * this forces superres to reduce scaling. + * + * Valid denominators are 8 - 16 for now. + */ + unsigned int rc_superres_kf_denominator; + + /*!\brief Frame super-resolution q threshold. + * + * The q level threshold after which superres is used. + * Valid values are 1 to 63. + * + * Used only by AOM_SUPERRES_QTHRESH + */ + unsigned int rc_superres_qthresh; + + /*!\brief Keyframe super-resolution q threshold. + * + * The q level threshold after which superres is used for key frames. + * Valid values are 1 to 63. + * + * Used only by AOM_SUPERRES_QTHRESH + */ + unsigned int rc_superres_kf_qthresh; + + /*!\brief Rate control algorithm to use. + * + * Indicates whether the end usage of this stream is to be streamed over + * a bandwidth constrained link, indicating that Constant Bit Rate (CBR) + * mode should be used, or whether it will be played back on a high + * bandwidth link, as from a local disk, where higher variations in + * bitrate are acceptable. + */ + enum aom_rc_mode rc_end_usage; + + /*!\brief Two-pass stats buffer. + * + * A buffer containing all of the stats packets produced in the first + * pass, concatenated. + */ + aom_fixed_buf_t rc_twopass_stats_in; + + /*!\brief first pass mb stats buffer. + * + * A buffer containing all of the first pass mb stats packets produced + * in the first pass, concatenated. + */ + aom_fixed_buf_t rc_firstpass_mb_stats_in; + + /*!\brief Target data rate + * + * Target bitrate to use for this stream, in kilobits per second. + */ + unsigned int rc_target_bitrate; + + /* + * quantizer settings + */ + + /*!\brief Minimum (Best Quality) Quantizer + * + * The quantizer is the most direct control over the quality of the + * encoded image. The range of valid values for the quantizer is codec + * specific. Consult the documentation for the codec to determine the + * values to use. To determine the range programmatically, call + * aom_codec_enc_config_default() with a usage value of 0. + */ + unsigned int rc_min_quantizer; + + /*!\brief Maximum (Worst Quality) Quantizer + * + * The quantizer is the most direct control over the quality of the + * encoded image. The range of valid values for the quantizer is codec + * specific. Consult the documentation for the codec to determine the + * values to use. To determine the range programmatically, call + * aom_codec_enc_config_default() with a usage value of 0. + */ + unsigned int rc_max_quantizer; + + /* + * bitrate tolerance + */ + + /*!\brief Rate control adaptation undershoot control + * + * This value, controls the tolerance of the VBR algorithm to undershoot + * and is used as a trigger threshold for more aggressive adaptation of Q. + * + * Valid values in the range 0-100. + */ + unsigned int rc_undershoot_pct; + + /*!\brief Rate control adaptation overshoot control + * + * This value, controls the tolerance of the VBR algorithm to overshoot + * and is used as a trigger threshold for more aggressive adaptation of Q. + * + * Valid values in the range 0-100. + */ + unsigned int rc_overshoot_pct; + + /* + * decoder buffer model parameters + */ + + /*!\brief Decoder Buffer Size + * + * This value indicates the amount of data that may be buffered by the + * decoding application. Note that this value is expressed in units of + * time (milliseconds). For example, a value of 5000 indicates that the + * client will buffer (at least) 5000ms worth of encoded data. Use the + * target bitrate (#rc_target_bitrate) to convert to bits/bytes, if + * necessary. + */ + unsigned int rc_buf_sz; + + /*!\brief Decoder Buffer Initial Size + * + * This value indicates the amount of data that will be buffered by the + * decoding application prior to beginning playback. This value is + * expressed in units of time (milliseconds). Use the target bitrate + * (#rc_target_bitrate) to convert to bits/bytes, if necessary. + */ + unsigned int rc_buf_initial_sz; + + /*!\brief Decoder Buffer Optimal Size + * + * This value indicates the amount of data that the encoder should try + * to maintain in the decoder's buffer. This value is expressed in units + * of time (milliseconds). Use the target bitrate (#rc_target_bitrate) + * to convert to bits/bytes, if necessary. + */ + unsigned int rc_buf_optimal_sz; + + /* + * 2 pass rate control parameters + */ + + /*!\brief Two-pass mode CBR/VBR bias + * + * Bias, expressed on a scale of 0 to 100, for determining target size + * for the current frame. The value 0 indicates the optimal CBR mode + * value should be used. The value 100 indicates the optimal VBR mode + * value should be used. Values in between indicate which way the + * encoder should "lean." + */ + unsigned int rc_2pass_vbr_bias_pct; + + /*!\brief Two-pass mode per-GOP minimum bitrate + * + * This value, expressed as a percentage of the target bitrate, indicates + * the minimum bitrate to be used for a single GOP (aka "section") + */ + unsigned int rc_2pass_vbr_minsection_pct; + + /*!\brief Two-pass mode per-GOP maximum bitrate + * + * This value, expressed as a percentage of the target bitrate, indicates + * the maximum bitrate to be used for a single GOP (aka "section") + */ + unsigned int rc_2pass_vbr_maxsection_pct; + + /* + * keyframing settings (kf) + */ + + /*!\brief Option to enable forward reference key frame + * + */ + int fwd_kf_enabled; + + /*!\brief Keyframe placement mode + * + * This value indicates whether the encoder should place keyframes at a + * fixed interval, or determine the optimal placement automatically + * (as governed by the #kf_min_dist and #kf_max_dist parameters) + */ + enum aom_kf_mode kf_mode; + + /*!\brief Keyframe minimum interval + * + * This value, expressed as a number of frames, prevents the encoder from + * placing a keyframe nearer than kf_min_dist to the previous keyframe. At + * least kf_min_dist frames non-keyframes will be coded before the next + * keyframe. Set kf_min_dist equal to kf_max_dist for a fixed interval. + */ + unsigned int kf_min_dist; + + /*!\brief Keyframe maximum interval + * + * This value, expressed as a number of frames, forces the encoder to code + * a keyframe if one has not been coded in the last kf_max_dist frames. + * A value of 0 implies all frames will be keyframes. Set kf_min_dist + * equal to kf_max_dist for a fixed interval. + */ + unsigned int kf_max_dist; + + /*!\brief sframe interval + * + * This value, expressed as a number of frames, forces the encoder to code + * an S-Frame every sframe_dist frames. + */ + unsigned int sframe_dist; + + /*!\brief sframe insertion mode + * + * This value must be set to 1 or 2, and tells the encoder how to insert + * S-Frames. It will only have an effect if sframe_dist != 0. + * + * If altref is enabled: + * - if sframe_mode == 1, the considered frame will be made into an + * S-Frame only if it is an altref frame + * - if sframe_mode == 2, the next altref frame will be made into an + * S-Frame. + * + * Otherwise: the considered frame will be made into an S-Frame. + */ + unsigned int sframe_mode; + + /*!\brief Tile coding mode + * + * This value indicates the tile coding mode. + * A value of 0 implies a normal non-large-scale tile coding. A value of 1 + * implies a large-scale tile coding. + */ + unsigned int large_scale_tile; + + /*!\brief Monochrome mode + * + * If this is nonzero, the encoder will generate a monochrome stream + * with no chroma planes. + */ + unsigned int monochrome; + + /*!\brief full_still_picture_hdr + * + * If this is nonzero, the encoder will generate a full header + * (reduced_still_picture_header is set to 0 in the sequence header OBU) even + * for still picture encoding. If this is zero (the default), a reduced + * header (reduced_still_picture_header is set to 1 in the sequence header + * OBU) is used for still picture encoding. This flag has no effect when a + * regular video with more than a single frame is encoded. + */ + unsigned int full_still_picture_hdr; + + /*!\brief Bitstream syntax mode + * + * This value indicates the bitstream syntax mode. + * A value of 0 indicates bitstream is saved as Section 5 bitstream. A value + * of 1 indicates the bitstream is saved in Annex-B format + */ + unsigned int save_as_annexb; + + /*!\brief Number of explicit tile widths specified + * + * This value indicates the number of tile widths specified + * A value of 0 implies no tile widths are specified. + * Tile widths are given in the array tile_widths[] + */ + int tile_width_count; + + /*!\brief Number of explicit tile heights specified + * + * This value indicates the number of tile heights specified + * A value of 0 implies no tile heights are specified. + * Tile heights are given in the array tile_heights[] + */ + int tile_height_count; + +/*!\brief Maximum number of tile widths in tile widths array + * + * This define gives the maximum number of elements in the tile_widths array. + */ +#define MAX_TILE_WIDTHS 64 // maximum tile width array length + + /*!\brief Array of specified tile widths + * + * This array specifies tile widths (and may be empty) + * The number of widths specified is given by tile_width_count + */ + int tile_widths[MAX_TILE_WIDTHS]; + +/*!\brief Maximum number of tile heights in tile heights array. + * + * This define gives the maximum number of elements in the tile_heights array. + */ +#define MAX_TILE_HEIGHTS 64 // maximum tile height array length + + /*!\brief Array of specified tile heights + * + * This array specifies tile heights (and may be empty) + * The number of heights specified is given by tile_height_count + */ + int tile_heights[MAX_TILE_HEIGHTS]; + + /*!\brief Whether encoder should use fixed QP offsets. + * + * If a value of 1 is provided, encoder will use fixed QP offsets for frames + * at different levels of the pyramid. + * If a value of 0 is provided, encoder will NOT use fixed QP offsets. + * Note: This option is only relevant for --end-usage=q. + */ + unsigned int use_fixed_qp_offsets; + + /*!\brief Deprecated and ignored. DO NOT USE. + * + * TODO(aomedia:3269): Remove fixed_qp_offsets in libaom v4.0.0. + */ + int fixed_qp_offsets[5]; + + /*!\brief Options defined per config file + * + */ + cfg_options_t encoder_cfg; +} aom_codec_enc_cfg_t; /**< alias for struct aom_codec_enc_cfg */ + +/*!\brief Initialize an encoder instance + * + * Initializes an encoder context using the given interface. Applications + * should call the aom_codec_enc_init convenience macro instead of this + * function directly, to ensure that the ABI version number parameter + * is properly initialized. + * + * If the library was configured with -DCONFIG_MULTITHREAD=0, this call + * is not thread safe and should be guarded with a lock if being used + * in a multithreaded context. + * + * If aom_codec_enc_init_ver() fails, it is not necessary to call + * aom_codec_destroy() on the encoder context. + * + * \param[in] ctx Pointer to this instance's context. + * \param[in] iface Pointer to the algorithm interface to use. + * \param[in] cfg Configuration to use, if known. + * \param[in] flags Bitfield of AOM_CODEC_USE_* flags + * \param[in] ver ABI version number. Must be set to + * AOM_ENCODER_ABI_VERSION + * \retval #AOM_CODEC_OK + * The encoder algorithm has been initialized. + * \retval #AOM_CODEC_MEM_ERROR + * Memory allocation failed. + */ +aom_codec_err_t aom_codec_enc_init_ver(aom_codec_ctx_t *ctx, + aom_codec_iface_t *iface, + const aom_codec_enc_cfg_t *cfg, + aom_codec_flags_t flags, int ver); + +/*!\brief Convenience macro for aom_codec_enc_init_ver() + * + * Ensures the ABI version parameter is properly set. + */ +#define aom_codec_enc_init(ctx, iface, cfg, flags) \ + aom_codec_enc_init_ver(ctx, iface, cfg, flags, AOM_ENCODER_ABI_VERSION) + +/*!\brief Get the default configuration for a usage. + * + * Initializes an encoder configuration structure with default values. Supports + * the notion of "usages" so that an algorithm may offer different default + * settings depending on the user's intended goal. This function \ref SHOULD + * be called by all applications to initialize the configuration structure + * before specializing the configuration with application specific values. + * + * \param[in] iface Pointer to the algorithm interface to use. + * \param[out] cfg Configuration buffer to populate. + * \param[in] usage Algorithm specific usage value. For AV1, must be + * set to AOM_USAGE_GOOD_QUALITY (0), + * AOM_USAGE_REALTIME (1), or AOM_USAGE_ALL_INTRA (2). + * + * \retval #AOM_CODEC_OK + * The configuration was populated. + * \retval #AOM_CODEC_INCAPABLE + * Interface is not an encoder interface. + * \retval #AOM_CODEC_INVALID_PARAM + * A parameter was NULL, or the usage value was not recognized. + */ +aom_codec_err_t aom_codec_enc_config_default(aom_codec_iface_t *iface, + aom_codec_enc_cfg_t *cfg, + unsigned int usage); + +/*!\brief Set or change configuration + * + * Reconfigures an encoder instance according to the given configuration. + * + * \param[in] ctx Pointer to this instance's context + * \param[in] cfg Configuration buffer to use + * + * \retval #AOM_CODEC_OK + * The configuration was populated. + * \retval #AOM_CODEC_INCAPABLE + * Interface is not an encoder interface. + * \retval #AOM_CODEC_INVALID_PARAM + * A parameter was NULL, or the usage value was not recognized. + */ +aom_codec_err_t aom_codec_enc_config_set(aom_codec_ctx_t *ctx, + const aom_codec_enc_cfg_t *cfg); + +/*!\brief Get global stream headers + * + * Retrieves a stream level global header packet, if supported by the codec. + * Calls to this function should be deferred until all configuration information + * has been passed to libaom. Otherwise the global header data may be + * invalidated by additional configuration changes. + * + * The AV1 implementation of this function returns an OBU. The OBU returned is + * in Low Overhead Bitstream Format. Specifically, the obu_has_size_field bit is + * set, and the buffer contains the obu_size field for the returned OBU. + * + * \param[in] ctx Pointer to this instance's context + * + * \retval NULL + * Encoder does not support global header, or an error occurred while + * generating the global header. + * + * \retval Non-NULL + * Pointer to buffer containing global header packet. The caller owns the + * memory associated with this buffer, and must free the 'buf' member of the + * aom_fixed_buf_t as well as the aom_fixed_buf_t pointer. Memory returned + * must be freed via call to free(). + */ +aom_fixed_buf_t *aom_codec_get_global_headers(aom_codec_ctx_t *ctx); + +/*!\brief usage parameter analogous to AV1 GOOD QUALITY mode. */ +#define AOM_USAGE_GOOD_QUALITY 0u +/*!\brief usage parameter analogous to AV1 REALTIME mode. */ +#define AOM_USAGE_REALTIME 1u +/*!\brief usage parameter analogous to AV1 all intra mode. */ +#define AOM_USAGE_ALL_INTRA 2u + +/*!\brief Encode a frame + * + * Encodes a video frame at the given "presentation time." The presentation + * time stamp (PTS) \ref MUST be strictly increasing. + * + * When the last frame has been passed to the encoder, this function should + * continue to be called in a loop, with the img parameter set to NULL. This + * will signal the end-of-stream condition to the encoder and allow it to + * encode any held buffers. Encoding is complete when aom_codec_encode() is + * called with img set to NULL and aom_codec_get_cx_data() returns no data. + * + * \param[in] ctx Pointer to this instance's context + * \param[in] img Image data to encode, NULL to flush. + * Encoding sample values outside the range + * [0..(1<<img->bit_depth)-1] is undefined behavior. + * Note: Although img is declared as a const pointer, + * if AV1E_SET_DENOISE_NOISE_LEVEL is set to a nonzero + * value aom_codec_encode() modifies (denoises) the + * samples in img->planes[i] . + * \param[in] pts Presentation time stamp, in timebase units. If img + * is NULL, pts is ignored. + * \param[in] duration Duration to show frame, in timebase units. If img + * is not NULL, duration must be nonzero. If img is + * NULL, duration is ignored. + * \param[in] flags Flags to use for encoding this frame. + * + * \retval #AOM_CODEC_OK + * The configuration was populated. + * \retval #AOM_CODEC_INCAPABLE + * Interface is not an encoder interface. + * \retval #AOM_CODEC_INVALID_PARAM + * A parameter was NULL, the image format is unsupported, etc. + */ +aom_codec_err_t aom_codec_encode(aom_codec_ctx_t *ctx, const aom_image_t *img, + aom_codec_pts_t pts, unsigned long duration, + aom_enc_frame_flags_t flags); + +/*!\brief Set compressed data output buffer + * + * Sets the buffer that the codec should output the compressed data + * into. This call effectively sets the buffer pointer returned in the + * next AOM_CODEC_CX_FRAME_PKT packet. Subsequent packets will be + * appended into this buffer. The buffer is preserved across frames, + * so applications must periodically call this function after flushing + * the accumulated compressed data to disk or to the network to reset + * the pointer to the buffer's head. + * + * `pad_before` bytes will be skipped before writing the compressed + * data, and `pad_after` bytes will be appended to the packet. The size + * of the packet will be the sum of the size of the actual compressed + * data, pad_before, and pad_after. The padding bytes will be preserved + * (not overwritten). + * + * Note that calling this function does not guarantee that the returned + * compressed data will be placed into the specified buffer. In the + * event that the encoded data will not fit into the buffer provided, + * the returned packet \ref MAY point to an internal buffer, as it would + * if this call were never used. In this event, the output packet will + * NOT have any padding, and the application must free space and copy it + * to the proper place. This is of particular note in configurations + * that may output multiple packets for a single encoded frame (e.g., lagged + * encoding) or if the application does not reset the buffer periodically. + * + * Applications may restore the default behavior of the codec providing + * the compressed data buffer by calling this function with a NULL + * buffer. + * + * Applications \ref MUSTNOT call this function during iteration of + * aom_codec_get_cx_data(). + * + * \param[in] ctx Pointer to this instance's context + * \param[in] buf Buffer to store compressed data into + * \param[in] pad_before Bytes to skip before writing compressed data + * \param[in] pad_after Bytes to skip after writing compressed data + * + * \retval #AOM_CODEC_OK + * The buffer was set successfully. + * \retval #AOM_CODEC_INVALID_PARAM + * A parameter was NULL, the image format is unsupported, etc. + */ +aom_codec_err_t aom_codec_set_cx_data_buf(aom_codec_ctx_t *ctx, + const aom_fixed_buf_t *buf, + unsigned int pad_before, + unsigned int pad_after); + +/*!\brief Encoded data iterator + * + * Iterates over a list of data packets to be passed from the encoder to the + * application. The different kinds of packets available are enumerated in + * #aom_codec_cx_pkt_kind. + * + * #AOM_CODEC_CX_FRAME_PKT packets should be passed to the application's + * muxer. Multiple compressed frames may be in the list. + * #AOM_CODEC_STATS_PKT packets should be appended to a global buffer. + * + * The application \ref MUST silently ignore any packet kinds that it does + * not recognize or support. + * + * The data buffers returned from this function are only guaranteed to be + * valid until the application makes another call to any aom_codec_* function. + * + * \param[in] ctx Pointer to this instance's context + * \param[in,out] iter Iterator storage, initialized to NULL + * + * \return Returns a pointer to an output data packet (compressed frame data, + * two-pass statistics, etc.) or NULL to signal end-of-list. + * + */ +const aom_codec_cx_pkt_t *aom_codec_get_cx_data(aom_codec_ctx_t *ctx, + aom_codec_iter_t *iter); + +/*!\brief Get Preview Frame + * + * Returns an image that can be used as a preview. Shows the image as it would + * exist at the decompressor. The application \ref MUST NOT write into this + * image buffer. + * + * \param[in] ctx Pointer to this instance's context + * + * \return Returns a pointer to a preview image, or NULL if no image is + * available. + * + */ +const aom_image_t *aom_codec_get_preview_frame(aom_codec_ctx_t *ctx); + +/*!@} - end defgroup encoder*/ +#ifdef __cplusplus +} +#endif +#endif // AOM_AOM_AOM_ENCODER_H_ |