diff options
Diffstat (limited to '')
| -rw-r--r-- | third_party/aom/aom/aomcx.h | 2205 |
1 files changed, 2205 insertions, 0 deletions
diff --git a/third_party/aom/aom/aomcx.h b/third_party/aom/aom/aomcx.h new file mode 100644 index 0000000000..edd8cd5e7c --- /dev/null +++ b/third_party/aom/aom/aomcx.h @@ -0,0 +1,2205 @@ +/* + * Copyright (c) 2016, Alliance for Open Media. All rights reserved + * + * This source code is subject to the terms of the BSD 2 Clause License and + * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License + * was not distributed with this source code in the LICENSE file, you can + * obtain it at www.aomedia.org/license/software. If the Alliance for Open + * Media Patent License 1.0 was not distributed with this source code in the + * PATENTS file, you can obtain it at www.aomedia.org/license/patent. + */ +#ifndef AOM_AOM_AOMCX_H_ +#define AOM_AOM_AOMCX_H_ + +/*!\defgroup aom_encoder AOMedia AOM/AV1 Encoder + * \ingroup aom + * + * @{ + */ +#include "aom/aom.h" +#include "aom/aom_encoder.h" +#include "aom/aom_external_partition.h" + +/*!\file + * \brief Provides definitions for using AOM or AV1 encoder algorithm within the + * aom Codec Interface. + * + * Several interfaces are excluded with CONFIG_REALTIME_ONLY build: + * Global motion + * Warped motion + * OBMC + * TPL model + * Loop restoration + * + * The following features are also disabled with CONFIG_REALTIME_ONLY: + * AV1E_SET_QUANT_B_ADAPT + * CNN + * 4X rectangular blocks + * 4X rectangular transform in intra prediction + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/*!\name Algorithm interface for AV1 + * + * This interface provides the capability to encode raw AV1 streams. + *@{ + */ + +/*!\brief A single instance of the AV1 encoder. + *\deprecated This access mechanism is provided for backwards compatibility; + * prefer aom_codec_av1_cx(). + */ +extern aom_codec_iface_t aom_codec_av1_cx_algo; + +/*!\brief The interface to the AV1 encoder. + */ +extern aom_codec_iface_t *aom_codec_av1_cx(void); +/*!@} - end algorithm interface member group */ + +/* + * Algorithm Flags + */ + +/*!\brief Don't reference the last frame + * + * When this flag is set, the encoder will not use the last frame as a + * predictor. When not set, the encoder will choose whether to use the + * last frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_LAST (1 << 16) +/*!\brief Don't reference the last2 frame + * + * When this flag is set, the encoder will not use the last2 frame as a + * predictor. When not set, the encoder will choose whether to use the + * last2 frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_LAST2 (1 << 17) +/*!\brief Don't reference the last3 frame + * + * When this flag is set, the encoder will not use the last3 frame as a + * predictor. When not set, the encoder will choose whether to use the + * last3 frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_LAST3 (1 << 18) +/*!\brief Don't reference the golden frame + * + * When this flag is set, the encoder will not use the golden frame as a + * predictor. When not set, the encoder will choose whether to use the + * golden frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_GF (1 << 19) + +/*!\brief Don't reference the alternate reference frame + * + * When this flag is set, the encoder will not use the alt ref frame as a + * predictor. When not set, the encoder will choose whether to use the + * alt ref frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_ARF (1 << 20) +/*!\brief Don't reference the bwd reference frame + * + * When this flag is set, the encoder will not use the bwd ref frame as a + * predictor. When not set, the encoder will choose whether to use the + * bwd ref frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_BWD (1 << 21) +/*!\brief Don't reference the alt2 reference frame + * + * When this flag is set, the encoder will not use the alt2 ref frame as a + * predictor. When not set, the encoder will choose whether to use the + * alt2 ref frame or not automatically. + */ +#define AOM_EFLAG_NO_REF_ARF2 (1 << 22) + +/*!\brief Don't update the last frame + * + * When this flag is set, the encoder will not update the last frame with + * the contents of the current frame. + */ +#define AOM_EFLAG_NO_UPD_LAST (1 << 23) + +/*!\brief Don't update the golden frame + * + * When this flag is set, the encoder will not update the golden frame with + * the contents of the current frame. + */ +#define AOM_EFLAG_NO_UPD_GF (1 << 24) + +/*!\brief Don't update the alternate reference frame + * + * When this flag is set, the encoder will not update the alt ref frame with + * the contents of the current frame. + */ +#define AOM_EFLAG_NO_UPD_ARF (1 << 25) +/*!\brief Disable entropy update + * + * When this flag is set, the encoder will not update its internal entropy + * model based on the entropy of this frame. + */ +#define AOM_EFLAG_NO_UPD_ENTROPY (1 << 26) +/*!\brief Disable ref frame mvs + * + * When this flag is set, the encoder will not allow frames to + * be encoded using mfmv. + */ +#define AOM_EFLAG_NO_REF_FRAME_MVS (1 << 27) +/*!\brief Enable error resilient frame + * + * When this flag is set, the encoder will code frames as error + * resilient. + */ +#define AOM_EFLAG_ERROR_RESILIENT (1 << 28) +/*!\brief Enable s frame mode + * + * When this flag is set, the encoder will code frames as an + * s frame. + */ +#define AOM_EFLAG_SET_S_FRAME (1 << 29) +/*!\brief Force primary_ref_frame to PRIMARY_REF_NONE + * + * When this flag is set, the encoder will set a frame's primary_ref_frame + * to PRIMARY_REF_NONE + */ +#define AOM_EFLAG_SET_PRIMARY_REF_NONE (1 << 30) + +/*!\brief AVx encoder control functions + * + * This set of macros define the control functions available for AVx + * encoder interface. + * The range of encode control ID is 7-229(max). + * + * \sa #aom_codec_control(aom_codec_ctx_t *ctx, int ctrl_id, ...) + */ +enum aome_enc_control_id { + /*!\brief Codec control function to set which reference frame encoder can use, + * int parameter. + */ + AOME_USE_REFERENCE = 7, + + /*!\brief Codec control function to pass an ROI map to encoder, aom_roi_map_t* + * parameter. + */ + AOME_SET_ROI_MAP = 8, + + /*!\brief Codec control function to pass an Active map to encoder, + * aom_active_map_t* parameter. + */ + AOME_SET_ACTIVEMAP = 9, + + /* NOTE: enum 10 unused */ + + /*!\brief Codec control function to set encoder scaling mode for the next + * frame to be coded, aom_scaling_mode_t* parameter. + */ + AOME_SET_SCALEMODE = 11, + + /*!\brief Codec control function to set encoder spatial layer id, int + * parameter. + */ + AOME_SET_SPATIAL_LAYER_ID = 12, + + /*!\brief Codec control function to set encoder internal speed settings, + * int parameter + * + * Changes in this value influences the complexity of algorithms used in + * encoding process, values greater than 0 will increase encoder speed at + * the expense of quality. + * + * Valid range: 0..11. 0 runs the slowest, and 11 runs the fastest; + * quality improves as speed decreases (since more compression + * possibilities are explored). + * + * NOTE: 10 and 11 are only allowed in AOM_USAGE_REALTIME. In + * AOM_USAGE_GOOD_QUALITY and AOM_USAGE_ALL_INTRA, 9 is the highest allowed + * value. However, AOM_USAGE_GOOD_QUALITY treats 7..9 the same as 6. Also, + * AOM_USAGE_REALTIME treats 0..4 the same as 5. + */ + AOME_SET_CPUUSED = 13, + + /*!\brief Codec control function to enable automatic set and use alf frames, + * unsigned int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AOME_SET_ENABLEAUTOALTREF = 14, + + /* NOTE: enum 15 unused */ + + /*!\brief Codec control function to set the sharpness parameter, + * unsigned int parameter. + * + * This parameter controls the level at which rate-distortion optimization of + * transform coefficients favours sharpness in the block. + * + * Valid range: 0..7. The default is 0. Values 1-7 will avoid eob and skip + * block optimization and will change rdmult in favour of block sharpness. + */ + AOME_SET_SHARPNESS = AOME_SET_ENABLEAUTOALTREF + 2, // 16 + + /*!\brief Codec control function to set the threshold for MBs treated static, + * unsigned int parameter + */ + AOME_SET_STATIC_THRESHOLD = 17, + + /* NOTE: enum 18 unused */ + + /*!\brief Codec control function to get last quantizer chosen by the encoder, + * int* parameter + * + * Return value uses internal quantizer scale defined by the codec. + */ + AOME_GET_LAST_QUANTIZER = AOME_SET_STATIC_THRESHOLD + 2, // 19 + + /*!\brief Codec control function to get last quantizer chosen by the encoder, + * int* parameter + * + * Return value uses the 0..63 scale as used by the rc_*_quantizer config + * parameters. + */ + AOME_GET_LAST_QUANTIZER_64 = 20, + + /*!\brief Codec control function to set the max no of frames to create arf, + * unsigned int parameter + */ + AOME_SET_ARNR_MAXFRAMES = 21, + + /*!\brief Codec control function to set the filter strength for the arf, + * unsigned int parameter + */ + AOME_SET_ARNR_STRENGTH = 22, + + /* NOTE: enum 23 unused */ + + /*!\brief Codec control function to set visual tuning, aom_tune_metric (int) + * parameter + * + * The default is AOM_TUNE_PSNR. + */ + AOME_SET_TUNING = AOME_SET_ARNR_STRENGTH + 2, // 24 + + /*!\brief Codec control function to set constrained / constant quality level, + * unsigned int parameter + * + * Valid range: 0..63 + * + * \attention For this value to be used aom_codec_enc_cfg_t::rc_end_usage + * must be set to #AOM_CQ or #AOM_Q. + */ + AOME_SET_CQ_LEVEL = 25, + + /*!\brief Codec control function to set max data rate for intra frames, + * unsigned int parameter + * + * This value controls additional clamping on the maximum size of a + * keyframe. It is expressed as a percentage of the average + * per-frame bitrate, with the special (and default) value 0 meaning + * unlimited, or no additional clamping beyond the codec's built-in + * algorithm. + * + * For example, to allocate no more than 4.5 frames worth of bitrate + * to a keyframe, set this to 450. + */ + AOME_SET_MAX_INTRA_BITRATE_PCT = 26, + + /*!\brief Codec control function to set number of spatial layers, int + * parameter + */ + AOME_SET_NUMBER_SPATIAL_LAYERS = 27, + + /*!\brief Codec control function to set max data rate for inter frames, + * unsigned int parameter + * + * This value controls additional clamping on the maximum size of an + * inter frame. It is expressed as a percentage of the average + * per-frame bitrate, with the special (and default) value 0 meaning + * unlimited, or no additional clamping beyond the codec's built-in + * algorithm. + * + * For example, to allow no more than 4.5 frames worth of bitrate + * to an inter frame, set this to 450. + */ + AV1E_SET_MAX_INTER_BITRATE_PCT = AOME_SET_MAX_INTRA_BITRATE_PCT + 2, // 28 + + /*!\brief Boost percentage for Golden Frame in CBR mode, unsigned int + * parameter + * + * This value controls the amount of boost given to Golden Frame in + * CBR mode. It is expressed as a percentage of the average + * per-frame bitrate, with the special (and default) value 0 meaning + * the feature is off, i.e., no golden frame boost in CBR mode and + * average bitrate target is used. + * + * For example, to allow 100% more bits, i.e, 2X, in a golden frame + * than average frame, set this to 100. + */ + AV1E_SET_GF_CBR_BOOST_PCT = 29, + + /* NOTE: enum 30 unused */ + + /*!\brief Codec control function to set lossless encoding mode, unsigned int + * parameter + * + * AV1 can operate in lossless encoding mode, in which the bitstream + * produced will be able to decode and reconstruct a perfect copy of + * input source. + * + * - 0 = normal coding mode, may be lossy (default) + * - 1 = lossless coding mode + */ + AV1E_SET_LOSSLESS = AV1E_SET_GF_CBR_BOOST_PCT + 2, // 31 + + /*!\brief Codec control function to enable the row based multi-threading + * of the encoder, unsigned int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ROW_MT = 32, + + /*!\brief Codec control function to set number of tile columns. unsigned int + * parameter + * + * In encoding and decoding, AV1 allows an input image frame be partitioned + * into separate vertical tile columns, which can be encoded or decoded + * independently. This enables easy implementation of parallel encoding and + * decoding. The parameter for this control describes the number of tile + * columns (in log2 units), which has a valid range of [0, 6]: + * \verbatim + 0 = 1 tile column + 1 = 2 tile columns + 2 = 4 tile columns + ..... + n = 2**n tile columns + \endverbatim + * By default, the value is 0, i.e. one single column tile for entire image. + */ + AV1E_SET_TILE_COLUMNS = 33, + + /*!\brief Codec control function to set number of tile rows, unsigned int + * parameter + * + * In encoding and decoding, AV1 allows an input image frame be partitioned + * into separate horizontal tile rows, which can be encoded or decoded + * independently. The parameter for this control describes the number of tile + * rows (in log2 units), which has a valid range of [0, 6]: + * \verbatim + 0 = 1 tile row + 1 = 2 tile rows + 2 = 4 tile rows + ..... + n = 2**n tile rows + \endverbatim + * By default, the value is 0, i.e. one single row tile for entire image. + */ + AV1E_SET_TILE_ROWS = 34, + + /*!\brief Codec control function to enable RDO modulated by frame temporal + * dependency, unsigned int parameter + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ENABLE_TPL_MODEL = 35, + + /*!\brief Codec control function to enable temporal filtering on key frame, + * unsigned int parameter + * + * - 0 = disable + * - 1 = enable without overlay (default) + * - 2 = enable with overlay + */ + AV1E_SET_ENABLE_KEYFRAME_FILTERING = 36, + + /*!\brief Codec control function to enable frame parallel decoding feature, + * unsigned int parameter + * + * AV1 has a bitstream feature to reduce decoding dependency between frames + * by turning off backward update of probability context used in encoding + * and decoding. This allows staged parallel processing of more than one + * video frames in the decoder. This control function provides a means to + * turn this feature on or off for bitstreams produced by encoder. + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_FRAME_PARALLEL_DECODING = 37, + + /*!\brief Codec control function to enable error_resilient_mode, int parameter + * + * AV1 has a bitstream feature to guarantee parsability of a frame + * by turning on the error_resilient_decoding mode, even though the + * reference buffers are unreliable or not received. + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_ERROR_RESILIENT_MODE = 38, + + /*!\brief Codec control function to enable s_frame_mode, int parameter + * + * AV1 has a bitstream feature to designate certain frames as S-frames, + * from where we can switch to a different stream, + * even though the reference buffers may not be exactly identical. + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_S_FRAME_MODE = 39, + + /*!\brief Codec control function to set adaptive quantization mode, unsigned + * int parameter + * + * AV1 has a segment based feature that allows encoder to adaptively change + * quantization parameter for each segment within a frame to improve the + * subjective quality. This control makes encoder operate in one of the + * several AQ modes supported. + * + * - 0 = disable (default) + * - 1 = variance + * - 2 = complexity + * - 3 = cyclic refresh + */ + AV1E_SET_AQ_MODE = 40, + + /*!\brief Codec control function to enable/disable periodic Q boost, unsigned + * int parameter + * + * One AV1 encoder speed feature is to enable quality boost by lowering + * frame level Q periodically. This control function provides a means to + * turn on/off this feature. + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_FRAME_PERIODIC_BOOST = 41, + + /*!\brief Codec control function to set noise sensitivity, unsigned int + * parameter + * + * - 0 = disable (default) + * - 1 = enable (Y only) + */ + AV1E_SET_NOISE_SENSITIVITY = 42, + + /*!\brief Codec control function to set content type, aom_tune_content + * parameter + * + * - AOM_CONTENT_DEFAULT = Regular video content (default) + * - AOM_CONTENT_SCREEN = Screen capture content + * - AOM_CONTENT_FILM = Film content + */ + AV1E_SET_TUNE_CONTENT = 43, + + /*!\brief Codec control function to set CDF update mode, unsigned int + * parameter + * + * - 0: no update + * - 1: update on every frame (default) + * - 2: selectively update + */ + AV1E_SET_CDF_UPDATE_MODE = 44, + + /*!\brief Codec control function to set color space info, int parameter + * + * - 0 = For future use + * - 1 = BT.709 + * - 2 = Unspecified (default) + * - 3 = For future use + * - 4 = BT.470 System M (historical) + * - 5 = BT.470 System B, G (historical) + * - 6 = BT.601 + * - 7 = SMPTE 240 + * - 8 = Generic film (color filters using illuminant C) + * - 9 = BT.2020, BT.2100 + * - 10 = SMPTE 428 (CIE 1921 XYZ) + * - 11 = SMPTE RP 431-2 + * - 12 = SMPTE EG 432-1 + * - 13..21 = For future use + * - 22 = EBU Tech. 3213-E + * - 23 = For future use + */ + AV1E_SET_COLOR_PRIMARIES = 45, + + /*!\brief Codec control function to set transfer function info, int parameter + * + * - 0 = For future use + * - 1 = BT.709 + * - 2 = Unspecified (default) + * - 3 = For future use + * - 4 = BT.470 System M (historical) + * - 5 = BT.470 System B, G (historical) + * - 6 = BT.601 + * - 7 = SMPTE 240 M + * - 8 = Linear + * - 9 = Logarithmic (100 : 1 range) + * - 10 = Logarithmic (100 * Sqrt(10) : 1 range) + * - 11 = IEC 61966-2-4 + * - 12 = BT.1361 + * - 13 = sRGB or sYCC + * - 14 = BT.2020 10-bit systems + * - 15 = BT.2020 12-bit systems + * - 16 = SMPTE ST 2084, ITU BT.2100 PQ + * - 17 = SMPTE ST 428 + * - 18 = BT.2100 HLG, ARIB STD-B67 + * - 19 = For future use + */ + AV1E_SET_TRANSFER_CHARACTERISTICS = 46, + + /*!\brief Codec control function to set transfer function info, int parameter + * + * - 0 = Identity matrix + * - 1 = BT.709 + * - 2 = Unspecified (default) + * - 3 = For future use + * - 4 = US FCC 73.628 + * - 5 = BT.470 System B, G (historical) + * - 6 = BT.601 + * - 7 = SMPTE 240 M + * - 8 = YCgCo + * - 9 = BT.2020 non-constant luminance, BT.2100 YCbCr + * - 10 = BT.2020 constant luminance + * - 11 = SMPTE ST 2085 YDzDx + * - 12 = Chromaticity-derived non-constant luminance + * - 13 = Chromaticity-derived constant luminance + * - 14 = BT.2100 ICtCp + * - 15 = For future use + */ + AV1E_SET_MATRIX_COEFFICIENTS = 47, + + /*!\brief Codec control function to set chroma 4:2:0 sample position info, + * aom_chroma_sample_position_t parameter + * + * AOM_CSP_UNKNOWN is default + */ + AV1E_SET_CHROMA_SAMPLE_POSITION = 48, + + /*!\brief Codec control function to set minimum interval between GF/ARF + * frames, unsigned int parameter + * + * By default the value is set as 4. + */ + AV1E_SET_MIN_GF_INTERVAL = 49, + + /*!\brief Codec control function to set minimum interval between GF/ARF + * frames, unsigned int parameter + * + * By default the value is set as 16. + */ + AV1E_SET_MAX_GF_INTERVAL = 50, + + /*!\brief Codec control function to get an active map back from the encoder, + aom_active_map_t* parameter + */ + AV1E_GET_ACTIVEMAP = 51, + + /*!\brief Codec control function to set color range bit, int parameter + * + * - 0 = Limited range, 16..235 or HBD equivalent (default) + * - 1 = Full range, 0..255 or HBD equivalent + */ + AV1E_SET_COLOR_RANGE = 52, + + /*!\brief Codec control function to set intended rendering image size, + * int32_t[2] parameter + * + * By default, this is identical to the image size in pixels. + */ + AV1E_SET_RENDER_SIZE = 53, + + /*!\brief Control to set target sequence level index for a certain operating + * point (OP), int parameter + * Possible values are in the form of "ABxy". + * - AB: OP index. + * - xy: Target level index for the OP. Possible values are: + * + 0~27: corresponding to level 2.0 ~ 8.3. Note: + * > Levels 2.2 (2), 2.3 (3), 3.2 (6), 3.3 (7), 4.2 (10) & 4.3 (11) are + * undefined. + * > Levels 7.x and 8.x (20~27) are in draft status, available under the + * config flag CONFIG_CWG_C013. + * + 31: maximum parameters level, no level-based constraints. + * + 32: keep level stats only for level monitoring. + * + * E.g.: + * - "0" means target level index 0 (2.0) for the 0th OP; + * - "109" means target level index 9 (4.1) for the 1st OP; + * - "1019" means target level index 19 (6.3) for the 10th OP. + * + * If the target level is not specified for an OP, the maximum parameters + * level of 31 is used as default. + */ + AV1E_SET_TARGET_SEQ_LEVEL_IDX = 54, + + /*!\brief Codec control function to get sequence level index for each + * operating point. int* parameter. There can be at most 32 operating points. + * The results will be written into a provided integer array of sufficient + * size. + */ + AV1E_GET_SEQ_LEVEL_IDX = 55, + + /*!\brief Codec control function to set intended superblock size, unsigned int + * parameter + * + * By default, the superblock size is determined separately for each + * frame by the encoder. + */ + AV1E_SET_SUPERBLOCK_SIZE = 56, + + /*!\brief Codec control function to enable automatic set and use of + * bwd-pred frames, unsigned int parameter + * + * - 0 = disable (default) + * - 1 = enable + */ + AOME_SET_ENABLEAUTOBWDREF = 57, + + /*!\brief Codec control function to encode with CDEF, unsigned int parameter + * + * CDEF is the constrained directional enhancement filter which is an + * in-loop filter aiming to remove coding artifacts + * + * - 0 = disable + * - 1 = enable for all frames (default) + * - 2 = disable for non-reference frames + */ + AV1E_SET_ENABLE_CDEF = 58, + + /*!\brief Codec control function to encode with Loop Restoration Filter, + * unsigned int parameter + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ENABLE_RESTORATION = 59, + + /*!\brief Codec control function to force video mode, unsigned int parameter + * + * - 0 = do not force video mode (default) + * - 1 = force video mode even for a single frame + */ + AV1E_SET_FORCE_VIDEO_MODE = 60, + + /*!\brief Codec control function to predict with OBMC mode, unsigned int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ENABLE_OBMC = 61, + + /*!\brief Codec control function to encode without trellis quantization, + * unsigned int parameter + * + * - 0 = apply trellis quantization (default) + * - 1 = do not apply trellis quantization + * - 2 = disable trellis quantization in rd search + * - 3 = disable trellis quantization in estimate yrd + */ + AV1E_SET_DISABLE_TRELLIS_QUANT = 62, + + /*!\brief Codec control function to encode with quantisation matrices, + * unsigned int parameter + * + * AOM can operate with default quantisation matrices dependent on + * quantisation level and block type. + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_ENABLE_QM = 63, + + /*!\brief Codec control function to set the min quant matrix flatness, + * unsigned int parameter + * + * AOM can operate with different ranges of quantisation matrices. + * As quantisation levels increase, the matrices get flatter. This + * control sets the minimum level of flatness from which the matrices + * are determined. + * + * By default, the encoder sets this minimum at half the available + * range. + */ + AV1E_SET_QM_MIN = 64, + + /*!\brief Codec control function to set the max quant matrix flatness, + * unsigned int parameter + * + * AOM can operate with different ranges of quantisation matrices. + * As quantisation levels increase, the matrices get flatter. This + * control sets the maximum level of flatness possible. + * + * By default, the encoder sets this maximum at the top of the + * available range. + */ + AV1E_SET_QM_MAX = 65, + + /*!\brief Codec control function to set the min quant matrix flatness, + * unsigned int parameter + * + * AOM can operate with different ranges of quantisation matrices. + * As quantisation levels increase, the matrices get flatter. This + * control sets the flatness for luma (Y). + * + * By default, the encoder sets this minimum at half the available + * range. + */ + AV1E_SET_QM_Y = 66, + + /*!\brief Codec control function to set the min quant matrix flatness, + * unsigned int parameter + * + * AOM can operate with different ranges of quantisation matrices. + * As quantisation levels increase, the matrices get flatter. This + * control sets the flatness for chroma (U). + * + * By default, the encoder sets this minimum at half the available + * range. + */ + AV1E_SET_QM_U = 67, + + /*!\brief Codec control function to set the min quant matrix flatness, + * unsigned int parameter + * + * AOM can operate with different ranges of quantisation matrices. + * As quantisation levels increase, the matrices get flatter. This + * control sets the flatness for chrome (V). + * + * By default, the encoder sets this minimum at half the available + * range. + */ + AV1E_SET_QM_V = 68, + + /* NOTE: enum 69 unused */ + + /*!\brief Codec control function to set a maximum number of tile groups, + * unsigned int parameter + * + * This will set the maximum number of tile groups. This will be + * overridden if an MTU size is set. The default value is 1. + */ + AV1E_SET_NUM_TG = 70, + + /*!\brief Codec control function to set an MTU size for a tile group, unsigned + * int parameter + * + * This will set the maximum number of bytes in a tile group. This can be + * exceeded only if a single tile is larger than this amount. + * + * By default, the value is 0, in which case a fixed number of tile groups + * is used. + */ + AV1E_SET_MTU = 71, + + /* NOTE: enum 72 unused */ + + /*!\brief Codec control function to enable/disable rectangular partitions, int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_RECT_PARTITIONS = 73, + + /*!\brief Codec control function to enable/disable AB partitions, int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_AB_PARTITIONS = 74, + + /*!\brief Codec control function to enable/disable 1:4 and 4:1 partitions, int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_1TO4_PARTITIONS = 75, + + /*!\brief Codec control function to set min partition size, int parameter + * + * min_partition_size is applied to both width and height of the partition. + * i.e, both width and height of a partition can not be smaller than + * the min_partition_size, except the partition at the picture boundary. + * + * Valid values: [4, 8, 16, 32, 64, 128]. The default value is 4 for + * 4x4. + */ + AV1E_SET_MIN_PARTITION_SIZE = 76, + + /*!\brief Codec control function to set max partition size, int parameter + * + * max_partition_size is applied to both width and height of the partition. + * i.e, both width and height of a partition can not be larger than + * the max_partition_size. + * + * Valid values:[4, 8, 16, 32, 64, 128] The default value is 128 for + * 128x128. + */ + AV1E_SET_MAX_PARTITION_SIZE = 77, + + /*!\brief Codec control function to turn on / off intra edge filter + * at sequence level, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_INTRA_EDGE_FILTER = 78, + + /*!\brief Codec control function to turn on / off frame order hint (int + * parameter). Affects: joint compound mode, motion field motion vector, + * ref frame sign bias + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_ORDER_HINT = 79, + + /*!\brief Codec control function to turn on / off 64-length transforms, int + * parameter + * + * This will enable or disable usage of length 64 transforms in any + * direction. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_TX64 = 80, + + /*!\brief Codec control function to turn on / off flip and identity + * transforms, int parameter + * + * This will enable or disable usage of flip and identity transform + * types in any direction. If enabled, this includes: + * - FLIPADST_DCT + * - DCT_FLIPADST + * - FLIPADST_FLIPADST + * - ADST_FLIPADST + * - FLIPADST_ADST + * - IDTX + * - V_DCT + * - H_DCT + * - V_ADST + * - H_ADST + * - V_FLIPADST + * - H_FLIPADST + * + * Valid values: + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_FLIP_IDTX = 81, + + /*!\brief Codec control function to turn on / off rectangular transforms, int + * parameter + * + * This will enable or disable usage of rectangular transforms. NOTE: + * Rectangular transforms only enabled when corresponding rectangular + * partitions are. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_RECT_TX = 82, + + /*!\brief Codec control function to turn on / off dist-wtd compound mode + * at sequence level, int parameter + * + * This will enable or disable distance-weighted compound mode. + * \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced + * to 0. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_DIST_WTD_COMP = 83, + + /*!\brief Codec control function to turn on / off ref frame mvs (mfmv) usage + * at sequence level, int parameter + * + * \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced + * to 0. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_REF_FRAME_MVS = 84, + + /*!\brief Codec control function to set temporal mv prediction + * enabling/disabling at frame level, int parameter + * + * \attention If AV1E_SET_ENABLE_REF_FRAME_MVS is 0, then this flag is + * forced to 0. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ALLOW_REF_FRAME_MVS = 85, + + /*!\brief Codec control function to turn on / off dual interpolation filter + * for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable + */ + AV1E_SET_ENABLE_DUAL_FILTER = 86, + + /*!\brief Codec control function to turn on / off delta quantization in chroma + * planes for a sequence, int parameter + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_ENABLE_CHROMA_DELTAQ = 87, + + /*!\brief Codec control function to turn on / off masked compound usage + * (wedge and diff-wtd compound modes) for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_MASKED_COMP = 88, + + /*!\brief Codec control function to turn on / off one sided compound usage + * for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_ONESIDED_COMP = 89, + + /*!\brief Codec control function to turn on / off interintra compound + * for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_INTERINTRA_COMP = 90, + + /*!\brief Codec control function to turn on / off smooth inter-intra + * mode for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_SMOOTH_INTERINTRA = 91, + + /*!\brief Codec control function to turn on / off difference weighted + * compound, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_DIFF_WTD_COMP = 92, + + /*!\brief Codec control function to turn on / off interinter wedge + * compound, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_INTERINTER_WEDGE = 93, + + /*!\brief Codec control function to turn on / off interintra wedge + * compound, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_INTERINTRA_WEDGE = 94, + + /*!\brief Codec control function to turn on / off global motion usage + * for a sequence, int parameter + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ENABLE_GLOBAL_MOTION = 95, + + /*!\brief Codec control function to turn on / off warped motion usage + * at sequence level, int parameter + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ENABLE_WARPED_MOTION = 96, + + /*!\brief Codec control function to turn on / off warped motion usage + * at frame level, int parameter + * + * \attention If AV1E_SET_ENABLE_WARPED_MOTION is 0, then this flag is + * forced to 0. + * + * - 0 = disable + * - 1 = enable (default) + * + * \note Excluded from CONFIG_REALTIME_ONLY build. + */ + AV1E_SET_ALLOW_WARPED_MOTION = 97, + + /*!\brief Codec control function to turn on / off filter intra usage at + * sequence level, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_FILTER_INTRA = 98, + + /*!\brief Codec control function to turn on / off smooth intra modes usage, + * int parameter + * + * This will enable or disable usage of smooth, smooth_h and smooth_v intra + * modes. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_SMOOTH_INTRA = 99, + + /*!\brief Codec control function to turn on / off Paeth intra mode usage, int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_PAETH_INTRA = 100, + + /*!\brief Codec control function to turn on / off CFL uv intra mode usage, int + * parameter + * + * This will enable or disable usage of chroma-from-luma intra mode. + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_CFL_INTRA = 101, + + /*!\brief Codec control function to turn on / off frame superresolution, int + * parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_SUPERRES = 102, + + /*!\brief Codec control function to turn on / off overlay frames for + * filtered ALTREF frames, int parameter + * + * This will enable or disable coding of overlay frames for filtered ALTREF + * frames. When set to 0, overlay frames are not used but show existing frame + * is used to display the filtered ALTREF frame as is. As a result the decoded + * frame rate remains the same as the display frame rate. The default is 1. + */ + AV1E_SET_ENABLE_OVERLAY = 103, + + /*!\brief Codec control function to turn on/off palette mode, int parameter */ + AV1E_SET_ENABLE_PALETTE = 104, + + /*!\brief Codec control function to turn on/off intra block copy mode, int + parameter */ + AV1E_SET_ENABLE_INTRABC = 105, + + /*!\brief Codec control function to turn on/off intra angle delta, int + parameter */ + AV1E_SET_ENABLE_ANGLE_DELTA = 106, + + /*!\brief Codec control function to set the delta q mode, unsigned int + * parameter + * + * AV1 supports a delta q mode feature, that allows modulating q per + * superblock. + * + * - 0 = deltaq signaling off + * - 1 = use modulation to maximize objective quality (default) + * - 2 = use modulation for local test + * - 3 = use modulation for key frame perceptual quality optimization + * - 4 = use modulation for user rating based perceptual quality optimization + */ + AV1E_SET_DELTAQ_MODE = 107, + + /*!\brief Codec control function to turn on/off loopfilter modulation + * when delta q modulation is enabled, unsigned int parameter. + * + * \attention AV1 only supports loopfilter modulation when delta q + * modulation is enabled as well. + */ + AV1E_SET_DELTALF_MODE = 108, + + /*!\brief Codec control function to set the single tile decoding mode, + * unsigned int parameter + * + * \attention Only applicable if large scale tiling is on. + * + * - 0 = single tile decoding is off + * - 1 = single tile decoding is on (default) + */ + AV1E_SET_SINGLE_TILE_DECODING = 109, + + /*!\brief Codec control function to enable the extreme motion vector unit + * test, unsigned int parameter + * + * - 0 = off + * - 1 = MAX_EXTREME_MV + * - 2 = MIN_EXTREME_MV + * + * \note This is only used in motion vector unit test. + */ + AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST = 110, + + /*!\brief Codec control function to signal picture timing info in the + * bitstream, aom_timing_info_type_t parameter. Default is + * AOM_TIMING_UNSPECIFIED. + */ + AV1E_SET_TIMING_INFO_TYPE = 111, + + /*!\brief Codec control function to add film grain parameters (one of several + * preset types) info in the bitstream, int parameter + * + Valid range: 0..16, 0 is unknown, 1..16 are test vectors + */ + AV1E_SET_FILM_GRAIN_TEST_VECTOR = 112, + + /*!\brief Codec control function to set the path to the film grain parameters, + * const char* parameter + */ + AV1E_SET_FILM_GRAIN_TABLE = 113, + + /*!\brief Sets the noise level, int parameter */ + AV1E_SET_DENOISE_NOISE_LEVEL = 114, + + /*!\brief Sets the denoisers block size, unsigned int parameter */ + AV1E_SET_DENOISE_BLOCK_SIZE = 115, + + /*!\brief Sets the chroma subsampling x value, unsigned int parameter */ + AV1E_SET_CHROMA_SUBSAMPLING_X = 116, + + /*!\brief Sets the chroma subsampling y value, unsigned int parameter */ + AV1E_SET_CHROMA_SUBSAMPLING_Y = 117, + + /*!\brief Control to use a reduced tx type set, int parameter */ + AV1E_SET_REDUCED_TX_TYPE_SET = 118, + + /*!\brief Control to use dct only for intra modes, int parameter */ + AV1E_SET_INTRA_DCT_ONLY = 119, + + /*!\brief Control to use dct only for inter modes, int parameter */ + AV1E_SET_INTER_DCT_ONLY = 120, + + /*!\brief Control to use default tx type only for intra modes, int parameter + */ + AV1E_SET_INTRA_DEFAULT_TX_ONLY = 121, + + /*!\brief Control to use adaptive quantize_b, int parameter */ + AV1E_SET_QUANT_B_ADAPT = 122, + + /*!\brief Control to select maximum height for the GF group pyramid structure, + * unsigned int parameter + * + * Valid range: 0..5 + */ + AV1E_SET_GF_MAX_PYRAMID_HEIGHT = 123, + + /*!\brief Control to select maximum reference frames allowed per frame, int + * parameter + * + * Valid range: 3..7 + */ + AV1E_SET_MAX_REFERENCE_FRAMES = 124, + + /*!\brief Control to use reduced set of single and compound references, int + parameter */ + AV1E_SET_REDUCED_REFERENCE_SET = 125, + + /*!\brief Control to set frequency of the cost updates for coefficients, + * unsigned int parameter + * + * - 0 = update at SB level (default) + * - 1 = update at SB row level in tile + * - 2 = update at tile level + * - 3 = turn off + */ + AV1E_SET_COEFF_COST_UPD_FREQ = 126, + + /*!\brief Control to set frequency of the cost updates for mode, unsigned int + * parameter + * + * - 0 = update at SB level (default) + * - 1 = update at SB row level in tile + * - 2 = update at tile level + * - 3 = turn off + */ + AV1E_SET_MODE_COST_UPD_FREQ = 127, + + /*!\brief Control to set frequency of the cost updates for motion vectors, + * unsigned int parameter + * + * - 0 = update at SB level (default) + * - 1 = update at SB row level in tile + * - 2 = update at tile level + * - 3 = turn off + */ + AV1E_SET_MV_COST_UPD_FREQ = 128, + + /*!\brief Control to set bit mask that specifies which tier each of the 32 + * possible operating points conforms to, unsigned int parameter + * + * - 0 = main tier (default) + * - 1 = high tier + */ + AV1E_SET_TIER_MASK = 129, + + /*!\brief Control to set minimum compression ratio, unsigned int parameter + * Take integer values. If non-zero, encoder will try to keep the compression + * ratio of each frame to be higher than the given value divided by 100. + * E.g. 850 means minimum compression ratio of 8.5. + */ + AV1E_SET_MIN_CR = 130, + + /* NOTE: enums 145-149 unused */ + + /*!\brief Codec control function to set the layer id, aom_svc_layer_id_t* + * parameter + */ + AV1E_SET_SVC_LAYER_ID = 131, + + /*!\brief Codec control function to set SVC parameters, aom_svc_params_t* + * parameter + */ + AV1E_SET_SVC_PARAMS = 132, + + /*!\brief Codec control function to set reference frame config: + * the ref_idx and the refresh flags for each buffer slot. + * aom_svc_ref_frame_config_t* parameter + */ + AV1E_SET_SVC_REF_FRAME_CONFIG = 133, + + /*!\brief Codec control function to set the path to the VMAF model used when + * tuning the encoder for VMAF, const char* parameter + */ + AV1E_SET_VMAF_MODEL_PATH = 134, + + /*!\brief Codec control function to enable EXT_TILE_DEBUG in AV1 encoder, + * unsigned int parameter + * + * - 0 = disable (default) + * - 1 = enable + * + * \note This is only used in lightfield example test. + */ + AV1E_ENABLE_EXT_TILE_DEBUG = 135, + + /*!\brief Codec control function to enable the superblock multipass unit test + * in AV1 to ensure that the encoder does not leak state between different + * passes. unsigned int parameter. + * + * - 0 = disable (default) + * - 1 = enable + * + * \note This is only used in sb_multipass unit test. + */ + AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST = 136, + + /*!\brief Control to select minimum height for the GF group pyramid structure, + * unsigned int parameter + * + * Valid values: 0..5 + */ + AV1E_SET_GF_MIN_PYRAMID_HEIGHT = 137, + + /*!\brief Control to set average complexity of the corpus in the case of + * single pass vbr based on LAP, unsigned int parameter + */ + AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP = 138, + + /*!\brief Control to get baseline gf interval + */ + AV1E_GET_BASELINE_GF_INTERVAL = 139, + + /*\brief Control to set encoding the denoised frame from denoise-noise-level + * + * - 0 = disabled/encode the original frame + * - 1 = enabled/encode the denoised frame (default) + */ + AV1E_SET_ENABLE_DNL_DENOISING = 140, + + /*!\brief Codec control function to turn on / off D45 to D203 intra mode + * usage, int parameter + * + * This will enable or disable usage of D45 to D203 intra modes, which are a + * subset of directional modes. This control has no effect if directional + * modes are disabled (AV1E_SET_ENABLE_DIRECTIONAL_INTRA set to 0). + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_DIAGONAL_INTRA = 141, + + /*!\brief Control to set frequency of the cost updates for intrabc motion + * vectors, unsigned int parameter + * + * - 0 = update at SB level (default) + * - 1 = update at SB row level in tile + * - 2 = update at tile level + * - 3 = turn off + */ + AV1E_SET_DV_COST_UPD_FREQ = 142, + + /*!\brief Codec control to set the path for partition stats read and write. + * const char * parameter. + */ + AV1E_SET_PARTITION_INFO_PATH = 143, + + /*!\brief Codec control to use an external partition model + * A set of callback functions is passed through this control + * to let the encoder encode with given partitions. + */ + AV1E_SET_EXTERNAL_PARTITION = 144, + + /*!\brief Codec control function to turn on / off directional intra mode + * usage, int parameter + * + * - 0 = disable + * - 1 = enable (default) + */ + AV1E_SET_ENABLE_DIRECTIONAL_INTRA = 145, + + /*!\brief Control to turn on / off transform size search. + * Note: it can not work with non RD pick mode in real-time encoding, + * where the max transform size is only 16x16. + * It will be ignored if non RD pick mode is set. + * + * - 0 = disable, transforms always have the largest possible size + * - 1 = enable, search for the best transform size for each block (default) + */ + AV1E_SET_ENABLE_TX_SIZE_SEARCH = 146, + + /*!\brief Codec control function to set reference frame compound prediction. + * aom_svc_ref_frame_comp_pred_t* parameter + */ + AV1E_SET_SVC_REF_FRAME_COMP_PRED = 147, + + /*!\brief Set --deltaq-mode strength. + * + * Valid range: [0, 1000] + */ + AV1E_SET_DELTAQ_STRENGTH = 148, + + /*!\brief Codec control to control loop filter + * + * - 0 = Loop filter is disabled for all frames + * - 1 = Loop filter is enabled for all frames + * - 2 = Loop filter is disabled for non-reference frames + * - 3 = Loop filter is disabled for the frames with low motion + */ + AV1E_SET_LOOPFILTER_CONTROL = 149, + + /*!\brief Codec control function to get the loopfilter chosen by the encoder, + * int* parameter + */ + AOME_GET_LOOPFILTER_LEVEL = 150, + + /*!\brief Codec control to automatically turn off several intra coding tools, + * unsigned int parameter + * - 0 = do not use the feature + * - 1 = enable the automatic decision to turn off several intra tools + */ + AV1E_SET_AUTO_INTRA_TOOLS_OFF = 151, + + /*!\brief Codec control function to set flag for rate control used by external + * encoders. + * - 1 = Enable rate control for external encoders. This will disable content + * dependency in rate control and cyclic refresh. + * - 0 = Default. Disable rate control for external encoders. + */ + AV1E_SET_RTC_EXTERNAL_RC = 152, + + /*!\brief Codec control function to enable frame parallel multi-threading + * of the encoder, unsigned int parameter + * + * - 0 = disable (default) + * - 1 = enable + */ + AV1E_SET_FP_MT = 153, + + /*!\brief Codec control to enable actual frame parallel encode or + * simulation of frame parallel encode in FPMT unit test, unsigned int + * parameter + * + * - 0 = simulate frame parallel encode + * - 1 = actual frame parallel encode (default) + * + * \note This is only used in FPMT unit test. + */ + AV1E_SET_FP_MT_UNIT_TEST = 154, + + /*!\brief Codec control function to get the target sequence level index for + * each operating point. int* parameter. There can be at most 32 operating + * points. The results will be written into a provided integer array of + * sufficient size. If a target level is not set, the result will be 31. + * Please refer to https://aomediacodec.github.io/av1-spec/#levels for more + * details on level definitions and indices. + */ + AV1E_GET_TARGET_SEQ_LEVEL_IDX = 155, + + /*!\brief Codec control function to get the number of operating points. int* + * parameter. + */ + AV1E_GET_NUM_OPERATING_POINTS = 156, + + /*!\brief Codec control function to skip the application of post-processing + * filters on reconstructed frame, unsigned int parameter + * + * - 0 = disable (default) + * - 1 = enable + * + * \attention For this value to be used aom_codec_enc_cfg_t::g_usage + * must be set to AOM_USAGE_ALL_INTRA. + */ + AV1E_SET_SKIP_POSTPROC_FILTERING = 157, + + /*!\brief Codec control function to enable the superblock level + * qp sweep in AV1 to ensure that end-to-end test runs well, + * unsigned int parameter. + * + * - 0 = disable (default) + * - 1 = enable + * + * \note This is only used in sb_qp_sweep unit test. + */ + AV1E_ENABLE_SB_QP_SWEEP = 158, + + /*!\brief Codec control to set quantizer for the next frame, int parameter. + * + * - Valid range [0, 63] + * + * This will turn off cyclic refresh. Only applicable to 1-pass. + */ + AV1E_SET_QUANTIZER_ONE_PASS = 159, + + /*!\brief Codec control to enable the rate distribution guided delta + * quantization in all intra mode, unsigned int parameter + * + * - 0 = disable (default) + * - 1 = enable + * + * \attention This feature requires --deltaq-mode=3, also an input file + * which contains rate distribution for each 16x16 block, + * passed in by --rate-distribution-info=rate_distribution.txt. + */ + AV1E_ENABLE_RATE_GUIDE_DELTAQ = 160, + + /*!\brief Codec control to set the input file for rate distribution used + * in all intra mode, const char * parameter + * The input should be the name of a text file, which + * contains (rows x cols) float values separated by space. + * Each float value represent the number of bits for each 16x16 block. + * rows = (frame_height + 15) / 16 + * cols = (frame_width + 15) / 16 + * + * \attention This feature requires --enable-rate-guide-deltaq=1. + */ + AV1E_SET_RATE_DISTRIBUTION_INFO = 161, + + /*!\brief Codec control to get the CDEF strength for Y / luma plane, + * int * parameter. + * Returns an integer array of CDEF_MAX_STRENGTHS elements. + */ + AV1E_GET_LUMA_CDEF_STRENGTH = 162, + + /*!\brief Codec control to set the target bitrate in kilobits per second, + * unsigned int parameter. For 1 pass CBR mode, single layer encoding. + * This controls replaces the call aom_codec_enc_config_set(&codec, &cfg) + * when only target bitrate is changed, and so is much cheaper as it + * bypasses a lot of unneeded code checks. + */ + AV1E_SET_BITRATE_ONE_PASS_CBR = 163, + + /*!\brief Codec control to set the maximum number of consecutive frame drops + * allowed for the frame dropper in 1 pass CBR mode, int parameter. Value of + * zero has no effect. + */ + AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR = 164, + + /*!\brief Codec control to set the frame drop mode for SVC, + * unsigned int parameter. The valid values are constants of the + * AOM_SVC_FRAME_DROP_MODE enum: AOM_LAYER_DROP or AOM_FULL_SUPERFRAME_DROP. + */ + AV1E_SET_SVC_FRAME_DROP_MODE = 165, + + // Any new encoder control IDs should be added above. + // Maximum allowed encoder control ID is 229. + // No encoder control ID should be added below. +}; + +/*!\brief aom 1-D scaling mode + * + * This set of constants define 1-D aom scaling modes + */ +typedef enum aom_scaling_mode_1d { + AOME_NORMAL = 0, + AOME_FOURFIVE = 1, + AOME_THREEFIVE = 2, + AOME_THREEFOUR = 3, + AOME_ONEFOUR = 4, + AOME_ONEEIGHT = 5, + AOME_ONETWO = 6, + AOME_TWOTHREE = 7, + AOME_ONETHREE = 8 +} AOM_SCALING_MODE; + +/*!\brief Max number of segments + * + * This is the limit of number of segments allowed within a frame. + * + * Currently same as "MAX_SEGMENTS" in AV1, the maximum that AV1 supports. + * + */ +#define AOM_MAX_SEGMENTS 8 + +/*!\brief aom region of interest map + * + * These defines the data structures for the region of interest map + * + * TODO(yaowu): create a unit test for ROI map related APIs + * + */ +typedef struct aom_roi_map { + /*! An id between 0 and 7 for each 8x8 region within a frame. */ + unsigned char *roi_map; + unsigned int rows; /**< Number of rows. */ + unsigned int cols; /**< Number of columns. */ + int delta_q[AOM_MAX_SEGMENTS]; /**< Quantizer deltas. */ + int delta_lf[AOM_MAX_SEGMENTS]; /**< Loop filter deltas. */ + /*! Static breakout threshold for each segment. */ + unsigned int static_threshold[AOM_MAX_SEGMENTS]; +} aom_roi_map_t; + +/*!\brief aom active region map + * + * These defines the data structures for active region map + * + */ + +typedef struct aom_active_map { + /*!\brief specify an on (1) or off (0) each 16x16 region within a frame */ + unsigned char *active_map; + unsigned int rows; /**< number of rows */ + unsigned int cols; /**< number of cols */ +} aom_active_map_t; + +/*!\brief aom image scaling mode + * + * This defines the data structure for image scaling mode + * + */ +typedef struct aom_scaling_mode { + AOM_SCALING_MODE h_scaling_mode; /**< horizontal scaling mode */ + AOM_SCALING_MODE v_scaling_mode; /**< vertical scaling mode */ +} aom_scaling_mode_t; + +/*!brief AV1 encoder content type */ +typedef enum { + AOM_CONTENT_DEFAULT, + AOM_CONTENT_SCREEN, + AOM_CONTENT_FILM, + AOM_CONTENT_INVALID +} aom_tune_content; + +/*!brief AV1 encoder timing info type signaling */ +typedef enum { + AOM_TIMING_UNSPECIFIED, + AOM_TIMING_EQUAL, + AOM_TIMING_DEC_MODEL +} aom_timing_info_type_t; + +/*!\brief Model tuning parameters + * + * Changes the encoder to tune for certain types of input material. + * + */ +typedef enum { + AOM_TUNE_PSNR = 0, + AOM_TUNE_SSIM = 1, + /* NOTE: enums 2 and 3 unused */ + AOM_TUNE_VMAF_WITH_PREPROCESSING = 4, + AOM_TUNE_VMAF_WITHOUT_PREPROCESSING = 5, + AOM_TUNE_VMAF_MAX_GAIN = 6, + AOM_TUNE_VMAF_NEG_MAX_GAIN = 7, + AOM_TUNE_BUTTERAUGLI = 8, + AOM_TUNE_VMAF_SALIENCY_MAP = 9, +} aom_tune_metric; + +/*!\brief Distortion metric to use for RD optimization. + * + * Changes the encoder to use a different distortion metric for RD search. Note + * that this value operates on a "lower level" compared to aom_tune_metric - it + * affects the distortion metric inside a block, while aom_tune_metric only + * affects RD across blocks. + * + */ +typedef enum { + // Use PSNR for in-block rate-distortion optimization. + AOM_DIST_METRIC_PSNR, + // Use quantization matrix-weighted PSNR for in-block rate-distortion + // optimization. If --enable-qm=1 is not specified, this falls back to + // behaving in the same way as AOM_DIST_METRIC_PSNR. + AOM_DIST_METRIC_QM_PSNR, +} aom_dist_metric; + +#define AOM_MAX_LAYERS 32 /**< Max number of layers */ +#define AOM_MAX_SS_LAYERS 4 /**< Max number of spatial layers */ +#define AOM_MAX_TS_LAYERS 8 /**< Max number of temporal layers */ + +/*!brief Struct for spatial and temporal layer ID */ +typedef struct aom_svc_layer_id { + int spatial_layer_id; /**< Spatial layer ID */ + int temporal_layer_id; /**< Temporal layer ID */ +} aom_svc_layer_id_t; + +/*!brief Parameter type for SVC + * + * In the arrays of size AOM_MAX_LAYERS, the index for spatial layer `sl` and + * temporal layer `tl` is sl * number_temporal_layers + tl. + * + */ +typedef struct aom_svc_params { + int number_spatial_layers; /**< Number of spatial layers */ + int number_temporal_layers; /**< Number of temporal layers */ + int max_quantizers[AOM_MAX_LAYERS]; /**< Max Q for each layer */ + int min_quantizers[AOM_MAX_LAYERS]; /**< Min Q for each layer */ + int scaling_factor_num[AOM_MAX_SS_LAYERS]; /**< Scaling factor-numerator */ + int scaling_factor_den[AOM_MAX_SS_LAYERS]; /**< Scaling factor-denominator */ + /*! Target bitrate for each layer, in kilobits per second */ + int layer_target_bitrate[AOM_MAX_LAYERS]; + /*! Frame rate factor for each temporal layer */ + int framerate_factor[AOM_MAX_TS_LAYERS]; +} aom_svc_params_t; + +/*!brief Parameters for setting ref frame config */ +typedef struct aom_svc_ref_frame_config { + // 7 references: The index 0 - 6 refers to the references: + // last(0), last2(1), last3(2), golden(3), bwdref(4), altref2(5), altref(6). + int reference[7]; /**< Reference flag for each of the 7 references. */ + /*! Buffer slot index for each of 7 references indexed above. */ + int ref_idx[7]; + int refresh[8]; /**< Refresh flag for each of the 8 slots. */ +} aom_svc_ref_frame_config_t; + +/*!brief Parameters for setting ref frame compound prediction */ +typedef struct aom_svc_ref_frame_comp_pred { + // Use compound prediction for the ref_frame pairs GOLDEN_LAST (0), + // LAST2_LAST (1), and ALTREF_LAST (2). + int use_comp_pred[3]; /**<Compound reference flag. */ +} aom_svc_ref_frame_comp_pred_t; + +/*!brief Frame drop modes for spatial/quality layer SVC */ +typedef enum { + AOM_LAYER_DROP, /**< Any spatial layer can drop. */ + AOM_FULL_SUPERFRAME_DROP, /**< Only full superframe can drop. */ +} AOM_SVC_FRAME_DROP_MODE; + +/*!\cond */ +/*!\brief Encoder control function parameter type + * + * Defines the data types that AOME/AV1E control functions take. + * + * \note Additional common controls are defined in aom.h. + * + * \note For each control ID "X", a macro-define of + * AOM_CTRL_X is provided. It is used at compile time to determine + * if the control ID is supported by the libaom library available, + * when the libaom version cannot be controlled. + */ +AOM_CTRL_USE_TYPE(AOME_USE_REFERENCE, int) +#define AOM_CTRL_AOME_USE_REFERENCE + +AOM_CTRL_USE_TYPE(AOME_SET_ROI_MAP, aom_roi_map_t *) +#define AOM_CTRL_AOME_SET_ROI_MAP + +AOM_CTRL_USE_TYPE(AOME_SET_ACTIVEMAP, aom_active_map_t *) +#define AOM_CTRL_AOME_SET_ACTIVEMAP + +AOM_CTRL_USE_TYPE(AOME_SET_SCALEMODE, aom_scaling_mode_t *) +#define AOM_CTRL_AOME_SET_SCALEMODE + +AOM_CTRL_USE_TYPE(AOME_SET_SPATIAL_LAYER_ID, int) +#define AOM_CTRL_AOME_SET_SPATIAL_LAYER_ID + +AOM_CTRL_USE_TYPE(AOME_SET_CPUUSED, int) +#define AOM_CTRL_AOME_SET_CPUUSED + +AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOALTREF, unsigned int) +#define AOM_CTRL_AOME_SET_ENABLEAUTOALTREF + +AOM_CTRL_USE_TYPE(AOME_SET_SHARPNESS, unsigned int) +#define AOM_CTRL_AOME_SET_SHARPNESS + +AOM_CTRL_USE_TYPE(AOME_SET_STATIC_THRESHOLD, unsigned int) +#define AOM_CTRL_AOME_SET_STATIC_THRESHOLD + +AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER, int *) +#define AOM_CTRL_AOME_GET_LAST_QUANTIZER + +AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER_64, int *) +#define AOM_CTRL_AOME_GET_LAST_QUANTIZER_64 + +AOM_CTRL_USE_TYPE(AOME_SET_ARNR_MAXFRAMES, unsigned int) +#define AOM_CTRL_AOME_SET_ARNR_MAXFRAMES + +AOM_CTRL_USE_TYPE(AOME_SET_ARNR_STRENGTH, unsigned int) +#define AOM_CTRL_AOME_SET_ARNR_STRENGTH + +AOM_CTRL_USE_TYPE(AOME_SET_TUNING, int) /* aom_tune_metric */ +#define AOM_CTRL_AOME_SET_TUNING + +AOM_CTRL_USE_TYPE(AOME_SET_CQ_LEVEL, unsigned int) +#define AOM_CTRL_AOME_SET_CQ_LEVEL + +AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTRA_BITRATE_PCT, unsigned int) +#define AOM_CTRL_AOME_SET_MAX_INTRA_BITRATE_PCT + +AOM_CTRL_USE_TYPE(AOME_SET_NUMBER_SPATIAL_LAYERS, int) +#define AOM_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOME_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS + +AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTER_BITRATE_PCT, unsigned int) +#define AOM_CTRL_AV1E_SET_MAX_INTER_BITRATE_PCT +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOM_CTRL_AOME_SET_MAX_INTER_BITRATE_PCT + +AOM_CTRL_USE_TYPE(AV1E_SET_GF_CBR_BOOST_PCT, unsigned int) +#define AOM_CTRL_AV1E_SET_GF_CBR_BOOST_PCT + +AOM_CTRL_USE_TYPE(AV1E_SET_LOSSLESS, unsigned int) +#define AOM_CTRL_AV1E_SET_LOSSLESS + +AOM_CTRL_USE_TYPE(AV1E_SET_ROW_MT, unsigned int) +#define AOM_CTRL_AV1E_SET_ROW_MT + +AOM_CTRL_USE_TYPE(AV1E_SET_TILE_COLUMNS, unsigned int) +#define AOM_CTRL_AV1E_SET_TILE_COLUMNS + +AOM_CTRL_USE_TYPE(AV1E_SET_TILE_ROWS, unsigned int) +#define AOM_CTRL_AV1E_SET_TILE_ROWS + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TPL_MODEL, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_TPL_MODEL + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_KEYFRAME_FILTERING, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_KEYFRAME_FILTERING + +AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PARALLEL_DECODING, unsigned int) +#define AOM_CTRL_AV1E_SET_FRAME_PARALLEL_DECODING + +AOM_CTRL_USE_TYPE(AV1E_SET_ERROR_RESILIENT_MODE, int) +#define AOM_CTRL_AV1E_SET_ERROR_RESILIENT_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_S_FRAME_MODE, int) +#define AOM_CTRL_AV1E_SET_S_FRAME_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_AQ_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_AQ_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PERIODIC_BOOST, unsigned int) +#define AOM_CTRL_AV1E_SET_FRAME_PERIODIC_BOOST + +AOM_CTRL_USE_TYPE(AV1E_SET_NOISE_SENSITIVITY, unsigned int) +#define AOM_CTRL_AV1E_SET_NOISE_SENSITIVITY + +AOM_CTRL_USE_TYPE(AV1E_SET_TUNE_CONTENT, int) /* aom_tune_content */ +#define AOM_CTRL_AV1E_SET_TUNE_CONTENT + +AOM_CTRL_USE_TYPE(AV1E_SET_CDF_UPDATE_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_CDF_UPDATE_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_PRIMARIES, int) +#define AOM_CTRL_AV1E_SET_COLOR_PRIMARIES + +AOM_CTRL_USE_TYPE(AV1E_SET_TRANSFER_CHARACTERISTICS, int) +#define AOM_CTRL_AV1E_SET_TRANSFER_CHARACTERISTICS + +AOM_CTRL_USE_TYPE(AV1E_SET_MATRIX_COEFFICIENTS, int) +#define AOM_CTRL_AV1E_SET_MATRIX_COEFFICIENTS + +AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SAMPLE_POSITION, int) +#define AOM_CTRL_AV1E_SET_CHROMA_SAMPLE_POSITION + +AOM_CTRL_USE_TYPE(AV1E_SET_MIN_GF_INTERVAL, unsigned int) +#define AOM_CTRL_AV1E_SET_MIN_GF_INTERVAL + +AOM_CTRL_USE_TYPE(AV1E_SET_MAX_GF_INTERVAL, unsigned int) +#define AOM_CTRL_AV1E_SET_MAX_GF_INTERVAL + +AOM_CTRL_USE_TYPE(AV1E_GET_ACTIVEMAP, aom_active_map_t *) +#define AOM_CTRL_AV1E_GET_ACTIVEMAP + +AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_RANGE, int) +#define AOM_CTRL_AV1E_SET_COLOR_RANGE + +AOM_CTRL_USE_TYPE(AV1E_SET_RENDER_SIZE, int *) +#define AOM_CTRL_AV1E_SET_RENDER_SIZE + +AOM_CTRL_USE_TYPE(AV1E_SET_TARGET_SEQ_LEVEL_IDX, int) +#define AOM_CTRL_AV1E_SET_TARGET_SEQ_LEVEL_IDX + +AOM_CTRL_USE_TYPE(AV1E_GET_SEQ_LEVEL_IDX, int *) +#define AOM_CTRL_AV1E_GET_SEQ_LEVEL_IDX + +AOM_CTRL_USE_TYPE(AV1E_SET_SUPERBLOCK_SIZE, unsigned int) +#define AOM_CTRL_AV1E_SET_SUPERBLOCK_SIZE + +AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOBWDREF, unsigned int) +#define AOM_CTRL_AOME_SET_ENABLEAUTOBWDREF + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CDEF, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_CDEF + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RESTORATION, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_RESTORATION + +AOM_CTRL_USE_TYPE(AV1E_SET_FORCE_VIDEO_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_FORCE_VIDEO_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OBMC, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_OBMC + +AOM_CTRL_USE_TYPE(AV1E_SET_DISABLE_TRELLIS_QUANT, unsigned int) +#define AOM_CTRL_AV1E_SET_DISABLE_TRELLIS_QUANT + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_QM, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_QM + +// TODO(aomedia:3231): Remove these two lines. +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_8X8, unsigned int) +#define AOM_CTRL_AV1E_SET_ENABLE_DIST_8X8 + +AOM_CTRL_USE_TYPE(AV1E_SET_QM_MIN, unsigned int) +#define AOM_CTRL_AV1E_SET_QM_MIN + +AOM_CTRL_USE_TYPE(AV1E_SET_QM_MAX, unsigned int) +#define AOM_CTRL_AV1E_SET_QM_MAX + +AOM_CTRL_USE_TYPE(AV1E_SET_QM_Y, unsigned int) +#define AOM_CTRL_AV1E_SET_QM_Y + +AOM_CTRL_USE_TYPE(AV1E_SET_QM_U, unsigned int) +#define AOM_CTRL_AV1E_SET_QM_U + +AOM_CTRL_USE_TYPE(AV1E_SET_QM_V, unsigned int) +#define AOM_CTRL_AV1E_SET_QM_V + +AOM_CTRL_USE_TYPE(AV1E_SET_NUM_TG, unsigned int) +#define AOM_CTRL_AV1E_SET_NUM_TG + +AOM_CTRL_USE_TYPE(AV1E_SET_MTU, unsigned int) +#define AOM_CTRL_AV1E_SET_MTU + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_PARTITIONS, int) +#define AOM_CTRL_AV1E_SET_ENABLE_RECT_PARTITIONS + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_AB_PARTITIONS, int) +#define AOM_CTRL_AV1E_SET_ENABLE_AB_PARTITIONS + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_1TO4_PARTITIONS, int) +#define AOM_CTRL_AV1E_SET_ENABLE_1TO4_PARTITIONS + +AOM_CTRL_USE_TYPE(AV1E_SET_MIN_PARTITION_SIZE, int) +#define AOM_CTRL_AV1E_SET_MIN_PARTITION_SIZE + +AOM_CTRL_USE_TYPE(AV1E_SET_MAX_PARTITION_SIZE, int) +#define AOM_CTRL_AV1E_SET_MAX_PARTITION_SIZE + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRA_EDGE_FILTER, int) +#define AOM_CTRL_AV1E_SET_ENABLE_INTRA_EDGE_FILTER + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ORDER_HINT, int) +#define AOM_CTRL_AV1E_SET_ENABLE_ORDER_HINT + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX64, int) +#define AOM_CTRL_AV1E_SET_ENABLE_TX64 + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FLIP_IDTX, int) +#define AOM_CTRL_AV1E_SET_ENABLE_FLIP_IDTX + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_TX, int) +#define AOM_CTRL_AV1E_SET_ENABLE_RECT_TX + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_WTD_COMP, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DIST_WTD_COMP + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_REF_FRAME_MVS, int) +#define AOM_CTRL_AV1E_SET_ENABLE_REF_FRAME_MVS + +AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_REF_FRAME_MVS, int) +#define AOM_CTRL_AV1E_SET_ALLOW_REF_FRAME_MVS + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DUAL_FILTER, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DUAL_FILTER + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CHROMA_DELTAQ, int) +#define AOM_CTRL_AV1E_SET_ENABLE_CHROMA_DELTAQ + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_MASKED_COMP, int) +#define AOM_CTRL_AV1E_SET_ENABLE_MASKED_COMP + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ONESIDED_COMP, int) +#define AOM_CTRL_AV1E_SET_ENABLE_ONESIDED_COMP + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_COMP, int) +#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_COMP + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTERINTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTERINTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIFF_WTD_COMP, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DIFF_WTD_COMP + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTER_WEDGE, int) +#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTER_WEDGE + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_WEDGE, int) +#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_WEDGE + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_GLOBAL_MOTION, int) +#define AOM_CTRL_AV1E_SET_ENABLE_GLOBAL_MOTION + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_WARPED_MOTION, int) +#define AOM_CTRL_AV1E_SET_ENABLE_WARPED_MOTION + +AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_WARPED_MOTION, int) +#define AOM_CTRL_AV1E_SET_ALLOW_WARPED_MOTION + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FILTER_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_FILTER_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PAETH_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_PAETH_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CFL_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_CFL_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SUPERRES, int) +#define AOM_CTRL_AV1E_SET_ENABLE_SUPERRES + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OVERLAY, int) +#define AOM_CTRL_AV1E_SET_ENABLE_OVERLAY + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PALETTE, int) +#define AOM_CTRL_AV1E_SET_ENABLE_PALETTE + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRABC, int) +#define AOM_CTRL_AV1E_SET_ENABLE_INTRABC + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ANGLE_DELTA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_ANGLE_DELTA + +AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_DELTAQ_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_DELTALF_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_DELTALF_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_SINGLE_TILE_DECODING, unsigned int) +#define AOM_CTRL_AV1E_SET_SINGLE_TILE_DECODING + +AOM_CTRL_USE_TYPE(AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST, unsigned int) +#define AOM_CTRL_AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST + +AOM_CTRL_USE_TYPE(AV1E_SET_TIMING_INFO_TYPE, int) /* aom_timing_info_type_t */ +#define AOM_CTRL_AV1E_SET_TIMING_INFO_TYPE + +AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TEST_VECTOR, int) +#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TEST_VECTOR + +AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TABLE, const char *) +#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TABLE + +AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_NOISE_LEVEL, int) +#define AOM_CTRL_AV1E_SET_DENOISE_NOISE_LEVEL + +AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_BLOCK_SIZE, unsigned int) +#define AOM_CTRL_AV1E_SET_DENOISE_BLOCK_SIZE + +AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_X, unsigned int) +#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_X + +AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_Y, unsigned int) +#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_Y + +AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_TX_TYPE_SET, int) +#define AOM_CTRL_AV1E_SET_REDUCED_TX_TYPE_SET + +AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DCT_ONLY, int) +#define AOM_CTRL_AV1E_SET_INTRA_DCT_ONLY + +AOM_CTRL_USE_TYPE(AV1E_SET_INTER_DCT_ONLY, int) +#define AOM_CTRL_AV1E_SET_INTER_DCT_ONLY + +AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DEFAULT_TX_ONLY, int) +#define AOM_CTRL_AV1E_SET_INTRA_DEFAULT_TX_ONLY + +AOM_CTRL_USE_TYPE(AV1E_SET_QUANT_B_ADAPT, int) +#define AOM_CTRL_AV1E_SET_QUANT_B_ADAPT + +AOM_CTRL_USE_TYPE(AV1E_SET_GF_MAX_PYRAMID_HEIGHT, unsigned int) +#define AOM_CTRL_AV1E_SET_GF_MAX_PYRAMID_HEIGHT + +AOM_CTRL_USE_TYPE(AV1E_SET_MAX_REFERENCE_FRAMES, int) +#define AOM_CTRL_AV1E_SET_MAX_REFERENCE_FRAMES + +AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_REFERENCE_SET, int) +#define AOM_CTRL_AV1E_SET_REDUCED_REFERENCE_SET + +AOM_CTRL_USE_TYPE(AV1E_SET_COEFF_COST_UPD_FREQ, unsigned int) +#define AOM_CTRL_AV1E_SET_COEFF_COST_UPD_FREQ + +AOM_CTRL_USE_TYPE(AV1E_SET_MODE_COST_UPD_FREQ, unsigned int) +#define AOM_CTRL_AV1E_SET_MODE_COST_UPD_FREQ + +AOM_CTRL_USE_TYPE(AV1E_SET_MV_COST_UPD_FREQ, unsigned int) +#define AOM_CTRL_AV1E_SET_MV_COST_UPD_FREQ + +AOM_CTRL_USE_TYPE(AV1E_SET_TIER_MASK, unsigned int) +#define AOM_CTRL_AV1E_SET_TIER_MASK + +AOM_CTRL_USE_TYPE(AV1E_SET_MIN_CR, unsigned int) +#define AOM_CTRL_AV1E_SET_MIN_CR + +AOM_CTRL_USE_TYPE(AV1E_SET_SVC_LAYER_ID, aom_svc_layer_id_t *) +#define AOM_CTRL_AV1E_SET_SVC_LAYER_ID +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOME_CTRL_AV1E_SET_SVC_LAYER_ID + +AOM_CTRL_USE_TYPE(AV1E_SET_SVC_PARAMS, aom_svc_params_t *) +#define AOM_CTRL_AV1E_SET_SVC_PARAMS +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOME_CTRL_AV1E_SET_SVC_PARAMS + +AOM_CTRL_USE_TYPE(AV1E_SET_SVC_REF_FRAME_CONFIG, aom_svc_ref_frame_config_t *) +#define AOM_CTRL_AV1E_SET_SVC_REF_FRAME_CONFIG +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOME_CTRL_AV1E_SET_SVC_REF_FRAME_CONFIG + +AOM_CTRL_USE_TYPE(AV1E_SET_VMAF_MODEL_PATH, const char *) +#define AOM_CTRL_AV1E_SET_VMAF_MODEL_PATH + +AOM_CTRL_USE_TYPE(AV1E_ENABLE_EXT_TILE_DEBUG, unsigned int) +#define AOM_CTRL_AV1E_ENABLE_EXT_TILE_DEBUG + +AOM_CTRL_USE_TYPE(AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST, unsigned int) +#define AOM_CTRL_AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST + +AOM_CTRL_USE_TYPE(AV1E_SET_GF_MIN_PYRAMID_HEIGHT, unsigned int) +#define AOM_CTRL_AV1E_SET_GF_MIN_PYRAMID_HEIGHT + +AOM_CTRL_USE_TYPE(AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP, unsigned int) +#define AOM_CTRL_AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP + +AOM_CTRL_USE_TYPE(AV1E_GET_BASELINE_GF_INTERVAL, int *) +#define AOM_CTRL_AV1E_GET_BASELINE_GF_INTERVAL + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DNL_DENOISING, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DNL_DENOISING + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIAGONAL_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DIAGONAL_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_DV_COST_UPD_FREQ, unsigned int) +#define AOM_CTRL_AV1E_SET_DV_COST_UPD_FREQ + +AOM_CTRL_USE_TYPE(AV1E_SET_PARTITION_INFO_PATH, const char *) +#define AOM_CTRL_AV1E_SET_PARTITION_INFO_PATH + +AOM_CTRL_USE_TYPE(AV1E_SET_EXTERNAL_PARTITION, aom_ext_part_funcs_t *) +#define AOM_CTRL_AV1E_SET_EXTERNAL_PARTITION + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIRECTIONAL_INTRA, int) +#define AOM_CTRL_AV1E_SET_ENABLE_DIRECTIONAL_INTRA + +AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX_SIZE_SEARCH, int) +#define AOM_CTRL_AV1E_SET_ENABLE_TX_SIZE_SEARCH + +AOM_CTRL_USE_TYPE(AV1E_SET_SVC_REF_FRAME_COMP_PRED, + aom_svc_ref_frame_comp_pred_t *) +#define AOM_CTRL_AV1E_SET_SVC_REF_FRAME_COMP_PRED +// TODO(aomedia:3231): Deprecated. Remove it. +#define AOME_CTRL_AV1E_SET_SVC_REF_FRAME_COMP_PRED + +AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_STRENGTH, unsigned int) +#define AOM_CTRL_AV1E_SET_DELTAQ_STRENGTH + +AOM_CTRL_USE_TYPE(AV1E_SET_LOOPFILTER_CONTROL, int) +#define AOM_CTRL_AV1E_SET_LOOPFILTER_CONTROL + +AOM_CTRL_USE_TYPE(AOME_GET_LOOPFILTER_LEVEL, int *) +#define AOM_CTRL_AOME_GET_LOOPFILTER_LEVEL + +AOM_CTRL_USE_TYPE(AV1E_SET_AUTO_INTRA_TOOLS_OFF, unsigned int) +#define AOM_CTRL_AV1E_SET_AUTO_INTRA_TOOLS_OFF + +AOM_CTRL_USE_TYPE(AV1E_SET_RTC_EXTERNAL_RC, int) +#define AOM_CTRL_AV1E_SET_RTC_EXTERNAL_RC + +AOM_CTRL_USE_TYPE(AV1E_SET_FP_MT, unsigned int) +#define AOM_CTRL_AV1E_SET_FP_MT + +AOM_CTRL_USE_TYPE(AV1E_SET_FP_MT_UNIT_TEST, unsigned int) +#define AOM_CTRL_AV1E_SET_FP_MT_UNIT_TEST + +AOM_CTRL_USE_TYPE(AV1E_GET_TARGET_SEQ_LEVEL_IDX, int *) +#define AOM_CTRL_AV1E_GET_TARGET_SEQ_LEVEL_IDX + +AOM_CTRL_USE_TYPE(AV1E_GET_NUM_OPERATING_POINTS, int *) +#define AOM_CTRL_AV1E_GET_NUM_OPERATING_POINTS + +AOM_CTRL_USE_TYPE(AV1E_SET_SKIP_POSTPROC_FILTERING, unsigned int) +#define AOM_CTRL_AV1E_SET_SKIP_POSTPROC_FILTERING + +AOM_CTRL_USE_TYPE(AV1E_ENABLE_SB_QP_SWEEP, unsigned int) +#define AOM_CTRL_AV1E_ENABLE_SB_QP_SWEEP + +AOM_CTRL_USE_TYPE(AV1E_SET_QUANTIZER_ONE_PASS, int) +#define AOM_CTRL_AV1E_SET_QUANTIZER_ONE_PASS + +AOM_CTRL_USE_TYPE(AV1E_ENABLE_RATE_GUIDE_DELTAQ, unsigned int) +#define AOM_CTRL_AV1E_ENABLE_RATE_GUIDE_DELTAQ + +AOM_CTRL_USE_TYPE(AV1E_SET_RATE_DISTRIBUTION_INFO, const char *) +#define AOM_CTRL_AV1E_SET_RATE_DISTRIBUTION_INFO + +AOM_CTRL_USE_TYPE(AV1E_GET_LUMA_CDEF_STRENGTH, int *) +#define AOM_CTRL_AV1E_GET_LUMA_CDEF_STRENGTH + +AOM_CTRL_USE_TYPE(AV1E_SET_BITRATE_ONE_PASS_CBR, unsigned int) +#define AOM_CTRL_AV1E_SET_BITRATE_ONE_PASS_CBR + +AOM_CTRL_USE_TYPE(AV1E_SET_SVC_FRAME_DROP_MODE, unsigned int) +#define AOM_CTRL_AV1E_SET_SVC_FRAME_DROP_MODE + +AOM_CTRL_USE_TYPE(AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR, int) +#define AOM_CTRL_AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR + +/*!\endcond */ +/*! @} - end defgroup aom_encoder */ +#ifdef __cplusplus +} // extern "C" +#endif + +#endif // AOM_AOM_AOMCX_H_ |