diff options
Diffstat (limited to '')
-rw-r--r-- | third_party/aom/av1/common/av1_loopfilter.c | 2099 |
1 files changed, 2099 insertions, 0 deletions
diff --git a/third_party/aom/av1/common/av1_loopfilter.c b/third_party/aom/av1/common/av1_loopfilter.c new file mode 100644 index 0000000000..5af025c654 --- /dev/null +++ b/third_party/aom/av1/common/av1_loopfilter.c @@ -0,0 +1,2099 @@ +/* + * Copyright (c) 2016, Alliance for Open Media. All rights reserved + * + * This source code is subject to the terms of the BSD 2 Clause License and + * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License + * was not distributed with this source code in the LICENSE file, you can + * obtain it at www.aomedia.org/license/software. If the Alliance for Open + * Media Patent License 1.0 was not distributed with this source code in the + * PATENTS file, you can obtain it at www.aomedia.org/license/patent. + */ + +#include <math.h> + +#include "config/aom_config.h" +#include "config/aom_dsp_rtcd.h" + +#include "aom_dsp/aom_dsp_common.h" +#include "aom_mem/aom_mem.h" +#include "aom_ports/mem.h" +#include "av1/common/av1_common_int.h" +#include "av1/common/av1_loopfilter.h" +#include "av1/common/reconinter.h" +#include "av1/common/seg_common.h" + +enum { + USE_SINGLE, + USE_DUAL, + USE_QUAD, +} UENUM1BYTE(USE_FILTER_TYPE); + +static const SEG_LVL_FEATURES seg_lvl_lf_lut[MAX_MB_PLANE][2] = { + { SEG_LVL_ALT_LF_Y_V, SEG_LVL_ALT_LF_Y_H }, + { SEG_LVL_ALT_LF_U, SEG_LVL_ALT_LF_U }, + { SEG_LVL_ALT_LF_V, SEG_LVL_ALT_LF_V } +}; + +static const int delta_lf_id_lut[MAX_MB_PLANE][2] = { { 0, 1 }, + { 2, 2 }, + { 3, 3 } }; + +static const int mode_lf_lut[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // INTRA_MODES + 1, 1, 0, 1, // INTER_MODES (GLOBALMV == 0) + 1, 1, 1, 1, 1, 1, 0, 1 // INTER_COMPOUND_MODES (GLOBAL_GLOBALMV == 0) +}; + +static void update_sharpness(loop_filter_info_n *lfi, int sharpness_lvl) { + int lvl; + + // For each possible value for the loop filter fill out limits + for (lvl = 0; lvl <= MAX_LOOP_FILTER; lvl++) { + // Set loop filter parameters that control sharpness. + int block_inside_limit = lvl >> ((sharpness_lvl > 0) + (sharpness_lvl > 4)); + + if (sharpness_lvl > 0) { + if (block_inside_limit > (9 - sharpness_lvl)) + block_inside_limit = (9 - sharpness_lvl); + } + + if (block_inside_limit < 1) block_inside_limit = 1; + + memset(lfi->lfthr[lvl].lim, block_inside_limit, SIMD_WIDTH); + memset(lfi->lfthr[lvl].mblim, (2 * (lvl + 2) + block_inside_limit), + SIMD_WIDTH); + } +} + +uint8_t av1_get_filter_level(const AV1_COMMON *cm, + const loop_filter_info_n *lfi_n, const int dir_idx, + int plane, const MB_MODE_INFO *mbmi) { + const int segment_id = mbmi->segment_id; + if (cm->delta_q_info.delta_lf_present_flag) { + int8_t delta_lf; + if (cm->delta_q_info.delta_lf_multi) { + const int delta_lf_idx = delta_lf_id_lut[plane][dir_idx]; + delta_lf = mbmi->delta_lf[delta_lf_idx]; + } else { + delta_lf = mbmi->delta_lf_from_base; + } + int base_level; + if (plane == 0) + base_level = cm->lf.filter_level[dir_idx]; + else if (plane == 1) + base_level = cm->lf.filter_level_u; + else + base_level = cm->lf.filter_level_v; + int lvl_seg = clamp(delta_lf + base_level, 0, MAX_LOOP_FILTER); + assert(plane >= 0 && plane <= 2); + const int seg_lf_feature_id = seg_lvl_lf_lut[plane][dir_idx]; + if (segfeature_active(&cm->seg, segment_id, seg_lf_feature_id)) { + const int data = get_segdata(&cm->seg, segment_id, seg_lf_feature_id); + lvl_seg = clamp(lvl_seg + data, 0, MAX_LOOP_FILTER); + } + + if (cm->lf.mode_ref_delta_enabled) { + const int scale = 1 << (lvl_seg >> 5); + lvl_seg += cm->lf.ref_deltas[mbmi->ref_frame[0]] * scale; + if (mbmi->ref_frame[0] > INTRA_FRAME) + lvl_seg += cm->lf.mode_deltas[mode_lf_lut[mbmi->mode]] * scale; + lvl_seg = clamp(lvl_seg, 0, MAX_LOOP_FILTER); + } + return lvl_seg; + } else { + return lfi_n->lvl[plane][segment_id][dir_idx][mbmi->ref_frame[0]] + [mode_lf_lut[mbmi->mode]]; + } +} + +void av1_loop_filter_init(AV1_COMMON *cm) { + assert(MB_MODE_COUNT == NELEMENTS(mode_lf_lut)); + loop_filter_info_n *lfi = &cm->lf_info; + struct loopfilter *lf = &cm->lf; + int lvl; + + // init limits for given sharpness + update_sharpness(lfi, lf->sharpness_level); + + // init hev threshold const vectors + for (lvl = 0; lvl <= MAX_LOOP_FILTER; lvl++) + memset(lfi->lfthr[lvl].hev_thr, (lvl >> 4), SIMD_WIDTH); +} + +// Update the loop filter for the current frame. +// This should be called before loop_filter_rows(), +// av1_loop_filter_frame() calls this function directly. +void av1_loop_filter_frame_init(AV1_COMMON *cm, int plane_start, + int plane_end) { + int filt_lvl[MAX_MB_PLANE], filt_lvl_r[MAX_MB_PLANE]; + int plane; + int seg_id; + // n_shift is the multiplier for lf_deltas + // the multiplier is 1 for when filter_lvl is between 0 and 31; + // 2 when filter_lvl is between 32 and 63 + loop_filter_info_n *const lfi = &cm->lf_info; + struct loopfilter *const lf = &cm->lf; + const struct segmentation *const seg = &cm->seg; + + // update sharpness limits + update_sharpness(lfi, lf->sharpness_level); + + filt_lvl[0] = cm->lf.filter_level[0]; + filt_lvl[1] = cm->lf.filter_level_u; + filt_lvl[2] = cm->lf.filter_level_v; + + filt_lvl_r[0] = cm->lf.filter_level[1]; + filt_lvl_r[1] = cm->lf.filter_level_u; + filt_lvl_r[2] = cm->lf.filter_level_v; + + assert(plane_start >= AOM_PLANE_Y); + assert(plane_end <= MAX_MB_PLANE); + + for (plane = plane_start; plane < plane_end; plane++) { + if (plane == 0 && !filt_lvl[0] && !filt_lvl_r[0]) + break; + else if (plane == 1 && !filt_lvl[1]) + continue; + else if (plane == 2 && !filt_lvl[2]) + continue; + + for (seg_id = 0; seg_id < MAX_SEGMENTS; seg_id++) { + for (int dir = 0; dir < 2; ++dir) { + int lvl_seg = (dir == 0) ? filt_lvl[plane] : filt_lvl_r[plane]; + const int seg_lf_feature_id = seg_lvl_lf_lut[plane][dir]; + if (segfeature_active(seg, seg_id, seg_lf_feature_id)) { + const int data = get_segdata(&cm->seg, seg_id, seg_lf_feature_id); + lvl_seg = clamp(lvl_seg + data, 0, MAX_LOOP_FILTER); + } + + if (!lf->mode_ref_delta_enabled) { + // we could get rid of this if we assume that deltas are set to + // zero when not in use; encoder always uses deltas + memset(lfi->lvl[plane][seg_id][dir], lvl_seg, + sizeof(lfi->lvl[plane][seg_id][dir])); + } else { + int ref, mode; + const int scale = 1 << (lvl_seg >> 5); + const int intra_lvl = lvl_seg + lf->ref_deltas[INTRA_FRAME] * scale; + lfi->lvl[plane][seg_id][dir][INTRA_FRAME][0] = + clamp(intra_lvl, 0, MAX_LOOP_FILTER); + + for (ref = LAST_FRAME; ref < REF_FRAMES; ++ref) { + for (mode = 0; mode < MAX_MODE_LF_DELTAS; ++mode) { + const int inter_lvl = lvl_seg + lf->ref_deltas[ref] * scale + + lf->mode_deltas[mode] * scale; + lfi->lvl[plane][seg_id][dir][ref][mode] = + clamp(inter_lvl, 0, MAX_LOOP_FILTER); + } + } + } + } + } + } +} + +static AOM_FORCE_INLINE TX_SIZE +get_transform_size(const MACROBLOCKD *const xd, const MB_MODE_INFO *const mbmi, + const int mi_row, const int mi_col, const int plane, + const int ss_x, const int ss_y) { + assert(mbmi != NULL); + if (xd && xd->lossless[mbmi->segment_id]) return TX_4X4; + + TX_SIZE tx_size = (plane == AOM_PLANE_Y) + ? mbmi->tx_size + : av1_get_max_uv_txsize(mbmi->bsize, ss_x, ss_y); + assert(tx_size < TX_SIZES_ALL); + if ((plane == AOM_PLANE_Y) && is_inter_block(mbmi) && !mbmi->skip_txfm) { + const BLOCK_SIZE sb_type = mbmi->bsize; + const int blk_row = mi_row & (mi_size_high[sb_type] - 1); + const int blk_col = mi_col & (mi_size_wide[sb_type] - 1); + const TX_SIZE mb_tx_size = + mbmi->inter_tx_size[av1_get_txb_size_index(sb_type, blk_row, blk_col)]; + assert(mb_tx_size < TX_SIZES_ALL); + tx_size = mb_tx_size; + } + + return tx_size; +} + +static const int tx_dim_to_filter_length[TX_SIZES] = { 4, 8, 14, 14, 14 }; + +// Return TX_SIZE from get_transform_size(), so it is plane and direction +// aware +static TX_SIZE set_lpf_parameters( + AV1_DEBLOCKING_PARAMETERS *const params, const ptrdiff_t mode_step, + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const EDGE_DIR edge_dir, const uint32_t x, const uint32_t y, + const int plane, const struct macroblockd_plane *const plane_ptr) { + // reset to initial values + params->filter_length = 0; + + // no deblocking is required + const uint32_t width = plane_ptr->dst.width; + const uint32_t height = plane_ptr->dst.height; + if ((width <= x) || (height <= y)) { + // just return the smallest transform unit size + return TX_4X4; + } + + const uint32_t scale_horz = plane_ptr->subsampling_x; + const uint32_t scale_vert = plane_ptr->subsampling_y; + // for sub8x8 block, chroma prediction mode is obtained from the bottom/right + // mi structure of the co-located 8x8 luma block. so for chroma plane, mi_row + // and mi_col should map to the bottom/right mi structure, i.e, both mi_row + // and mi_col should be odd number for chroma plane. + const int mi_row = scale_vert | ((y << scale_vert) >> MI_SIZE_LOG2); + const int mi_col = scale_horz | ((x << scale_horz) >> MI_SIZE_LOG2); + MB_MODE_INFO **mi = + cm->mi_params.mi_grid_base + mi_row * cm->mi_params.mi_stride + mi_col; + const MB_MODE_INFO *mbmi = mi[0]; + // If current mbmi is not correctly setup, return an invalid value to stop + // filtering. One example is that if this tile is not coded, then its mbmi + // it not set up. + if (mbmi == NULL) return TX_INVALID; + + const TX_SIZE ts = get_transform_size(xd, mi[0], mi_row, mi_col, plane, + scale_horz, scale_vert); + + { + const uint32_t coord = (VERT_EDGE == edge_dir) ? (x) : (y); + const uint32_t transform_masks = + edge_dir == VERT_EDGE ? tx_size_wide[ts] - 1 : tx_size_high[ts] - 1; + const int32_t tu_edge = (coord & transform_masks) ? (0) : (1); + + if (!tu_edge) return ts; + + // prepare outer edge parameters. deblock the edge if it's an edge of a TU + { + const uint32_t curr_level = + av1_get_filter_level(cm, &cm->lf_info, edge_dir, plane, mbmi); + const int curr_skipped = mbmi->skip_txfm && is_inter_block(mbmi); + uint32_t level = curr_level; + if (coord) { + { + const MB_MODE_INFO *const mi_prev = *(mi - mode_step); + if (mi_prev == NULL) return TX_INVALID; + const int pv_row = + (VERT_EDGE == edge_dir) ? (mi_row) : (mi_row - (1 << scale_vert)); + const int pv_col = + (VERT_EDGE == edge_dir) ? (mi_col - (1 << scale_horz)) : (mi_col); + const TX_SIZE pv_ts = get_transform_size( + xd, mi_prev, pv_row, pv_col, plane, scale_horz, scale_vert); + + const uint32_t pv_lvl = + av1_get_filter_level(cm, &cm->lf_info, edge_dir, plane, mi_prev); + + const int pv_skip_txfm = + mi_prev->skip_txfm && is_inter_block(mi_prev); + const BLOCK_SIZE bsize = get_plane_block_size( + mbmi->bsize, plane_ptr->subsampling_x, plane_ptr->subsampling_y); + assert(bsize < BLOCK_SIZES_ALL); + const int prediction_masks = edge_dir == VERT_EDGE + ? block_size_wide[bsize] - 1 + : block_size_high[bsize] - 1; + const int32_t pu_edge = !(coord & prediction_masks); + // if the current and the previous blocks are skipped, + // deblock the edge if the edge belongs to a PU's edge only. + if ((curr_level || pv_lvl) && + (!pv_skip_txfm || !curr_skipped || pu_edge)) { + const int dim = (VERT_EDGE == edge_dir) + ? AOMMIN(tx_size_wide_unit_log2[ts], + tx_size_wide_unit_log2[pv_ts]) + : AOMMIN(tx_size_high_unit_log2[ts], + tx_size_high_unit_log2[pv_ts]); + if (plane) { + params->filter_length = (dim == 0) ? 4 : 6; + } else { + assert(dim < TX_SIZES); + assert(dim >= 0); + params->filter_length = tx_dim_to_filter_length[dim]; + } + + // update the level if the current block is skipped, + // but the previous one is not + level = (curr_level) ? (curr_level) : (pv_lvl); + } + } + } + // prepare common parameters + if (params->filter_length) { + const loop_filter_thresh *const limits = cm->lf_info.lfthr + level; + params->lfthr = limits; + } + } + } + + return ts; +} + +static const uint32_t vert_filter_length_luma[TX_SIZES_ALL][TX_SIZES_ALL] = { + // TX_4X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X8 + { + 4, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, + }, + // TX_16X16 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_32X32 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_64X64 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_4X8 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X4 + { + 4, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, + }, + // TX_8X16 + { + 4, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, + }, + // TX_16X8 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_16X32 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_32X16 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_32X64 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_64X32 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_4X16 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_16X4 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_8X32 + { + 4, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, + }, + // TX_32X8 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_16X64 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, + // TX_64X16 + { + 4, 8, 14, 14, 14, 4, 8, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, 14, + }, +}; + +static const uint32_t horz_filter_length_luma[TX_SIZES_ALL][TX_SIZES_ALL] = { + // TX_4X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X8 + { + 4, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, + }, + // TX_16X16 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_32X32 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_64X64 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_4X8 + { + 4, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, + }, + // TX_8X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X16 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_16X8 + { + 4, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, + }, + // TX_16X32 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_32X16 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_32X64 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_64X32 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_4X16 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_16X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X32 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_32X8 + { + 4, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, 8, 8, 8, 4, 8, 8, 8, 8, + }, + // TX_16X64 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, + // TX_64X16 + { + 4, 8, 14, 14, 14, 8, 4, 14, 8, 14, 14, 14, 14, 14, 4, 14, 8, 14, 14, + }, +}; + +static const uint32_t vert_filter_length_chroma[TX_SIZES_ALL][TX_SIZES_ALL] = { + // TX_4X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X8 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_16X16 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_32X32 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_64X64 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_4X8 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X4 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_8X16 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_16X8 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_16X32 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_32X16 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_32X64 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_64X32 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_4X16 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_16X4 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_8X32 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_32X8 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_16X64 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, + // TX_64X16 + { + 4, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, + }, +}; + +static const uint32_t horz_filter_length_chroma[TX_SIZES_ALL][TX_SIZES_ALL] = { + // TX_4X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X8 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_16X16 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_32X32 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_64X64 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_4X8 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_8X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X16 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_16X8 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_16X32 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_32X16 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_32X64 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_64X32 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_4X16 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_16X4 + { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + }, + // TX_8X32 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_32X8 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_16X64 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, + // TX_64X16 + { + 4, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, 6, 6, 6, 4, 6, 6, 6, 6, + }, +}; + +static AOM_FORCE_INLINE void set_one_param_for_line_luma( + AV1_DEBLOCKING_PARAMETERS *const params, TX_SIZE *tx_size, + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const EDGE_DIR edge_dir, uint32_t mi_col, uint32_t mi_row, + const struct macroblockd_plane *const plane_ptr, int coord, + bool is_first_block, TX_SIZE prev_tx_size, const ptrdiff_t mode_step, + int *min_dim) { + (void)plane_ptr; + assert(mi_col << MI_SIZE_LOG2 < (uint32_t)plane_ptr->dst.width && + mi_row << MI_SIZE_LOG2 < (uint32_t)plane_ptr->dst.height); + const int is_vert = edge_dir == VERT_EDGE; + // reset to initial values + params->filter_length = 0; + + MB_MODE_INFO **mi = + cm->mi_params.mi_grid_base + mi_row * cm->mi_params.mi_stride + mi_col; + const MB_MODE_INFO *mbmi = mi[0]; + assert(mbmi); + + const TX_SIZE ts = + get_transform_size(xd, mi[0], mi_row, mi_col, AOM_PLANE_Y, 0, 0); + +#ifndef NDEBUG + const uint32_t transform_masks = + is_vert ? tx_size_wide[ts] - 1 : tx_size_high[ts] - 1; + const int32_t tu_edge = ((coord * MI_SIZE) & transform_masks) ? (0) : (1); + assert(tu_edge); +#endif // NDEBUG + // If we are not the first block, then coord is always true, so + // !is_first_block is technically redundant. But we are keeping it here so the + // compiler can compile away this conditional if we pass in is_first_block := + // false + bool curr_skipped = false; + if (!is_first_block || coord) { + const MB_MODE_INFO *const mi_prev = *(mi - mode_step); + const int pv_row = is_vert ? mi_row : (mi_row - 1); + const int pv_col = is_vert ? (mi_col - 1) : mi_col; + const TX_SIZE pv_ts = + is_first_block + ? get_transform_size(xd, mi_prev, pv_row, pv_col, AOM_PLANE_Y, 0, 0) + : prev_tx_size; + if (is_first_block) { + *min_dim = is_vert ? block_size_high[mi_prev->bsize] + : block_size_wide[mi_prev->bsize]; + } + assert(mi_prev); + uint8_t level = + av1_get_filter_level(cm, &cm->lf_info, edge_dir, AOM_PLANE_Y, mbmi); + if (!level) { + level = av1_get_filter_level(cm, &cm->lf_info, edge_dir, AOM_PLANE_Y, + mi_prev); + } + + const int32_t pu_edge = mi_prev != mbmi; + + // The quad loop filter assumes that all the transform blocks within a + // 8x16/16x8/16x16 prediction block are of the same size. + assert(IMPLIES( + !pu_edge && (mbmi->bsize >= BLOCK_8X16 && mbmi->bsize <= BLOCK_16X16), + pv_ts == ts)); + + if (!pu_edge) { + curr_skipped = mbmi->skip_txfm && is_inter_block(mbmi); + } + if ((pu_edge || !curr_skipped) && level) { + params->filter_length = is_vert ? vert_filter_length_luma[ts][pv_ts] + : horz_filter_length_luma[ts][pv_ts]; + + // prepare common parameters + const loop_filter_thresh *const limits = cm->lf_info.lfthr + level; + params->lfthr = limits; + } + } + const int block_dim = + is_vert ? block_size_high[mbmi->bsize] : block_size_wide[mbmi->bsize]; + *min_dim = AOMMIN(*min_dim, block_dim); + + *tx_size = ts; +} + +// Similar to set_lpf_parameters, but does so one row/col at a time to reduce +// calls to \ref get_transform_size and \ref av1_get_filter_level +static AOM_FORCE_INLINE void set_lpf_parameters_for_line_luma( + AV1_DEBLOCKING_PARAMETERS *const params_buf, TX_SIZE *tx_buf, + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const EDGE_DIR edge_dir, uint32_t mi_col, uint32_t mi_row, + const struct macroblockd_plane *const plane_ptr, const uint32_t mi_range, + const ptrdiff_t mode_step, int *min_dim) { + const int is_vert = edge_dir == VERT_EDGE; + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + uint32_t *counter_ptr = is_vert ? &mi_col : &mi_row; + TX_SIZE prev_tx_size = TX_INVALID; + + // Unroll the first iteration of the loop + set_one_param_for_line_luma(params, tx_size, cm, xd, edge_dir, mi_col, mi_row, + plane_ptr, *counter_ptr, true, prev_tx_size, + mode_step, min_dim); + + // Advance + int advance_units = + is_vert ? tx_size_wide_unit[*tx_size] : tx_size_high_unit[*tx_size]; + prev_tx_size = *tx_size; + *counter_ptr += advance_units; + params += advance_units; + tx_size += advance_units; + + while (*counter_ptr < mi_range) { + set_one_param_for_line_luma(params, tx_size, cm, xd, edge_dir, mi_col, + mi_row, plane_ptr, *counter_ptr, false, + prev_tx_size, mode_step, min_dim); + + // Advance + advance_units = + is_vert ? tx_size_wide_unit[*tx_size] : tx_size_high_unit[*tx_size]; + prev_tx_size = *tx_size; + *counter_ptr += advance_units; + params += advance_units; + tx_size += advance_units; + } +} + +static AOM_FORCE_INLINE void set_one_param_for_line_chroma( + AV1_DEBLOCKING_PARAMETERS *const params, TX_SIZE *tx_size, + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const EDGE_DIR edge_dir, uint32_t mi_col, uint32_t mi_row, int coord, + bool is_first_block, TX_SIZE prev_tx_size, + const struct macroblockd_plane *const plane_ptr, const ptrdiff_t mode_step, + const int scale_horz, const int scale_vert, int *min_dim, int plane, + int joint_filter_chroma) { + const int is_vert = edge_dir == VERT_EDGE; + (void)plane_ptr; + assert((mi_col << MI_SIZE_LOG2) < + (uint32_t)(plane_ptr->dst.width << scale_horz) && + (mi_row << MI_SIZE_LOG2) < + (uint32_t)(plane_ptr->dst.height << scale_vert)); + // reset to initial values + params->filter_length = 0; + + // for sub8x8 block, chroma prediction mode is obtained from the + // bottom/right mi structure of the co-located 8x8 luma block. so for chroma + // plane, mi_row and mi_col should map to the bottom/right mi structure, + // i.e, both mi_row and mi_col should be odd number for chroma plane. + mi_row |= scale_vert; + mi_col |= scale_horz; + MB_MODE_INFO **mi = + cm->mi_params.mi_grid_base + mi_row * cm->mi_params.mi_stride + mi_col; + const MB_MODE_INFO *mbmi = mi[0]; + assert(mbmi); + + const TX_SIZE ts = get_transform_size(xd, mi[0], mi_row, mi_col, plane, + scale_horz, scale_vert); + *tx_size = ts; + +#ifndef NDEBUG + const uint32_t transform_masks = + is_vert ? tx_size_wide[ts] - 1 : tx_size_high[ts] - 1; + const int32_t tu_edge = ((coord * MI_SIZE) & transform_masks) ? (0) : (1); + assert(tu_edge); +#endif // NDEBUG + + // If we are not the first block, then coord is always true, so + // !is_first_block is technically redundant. But we are keeping it here so the + // compiler can compile away this conditional if we pass in is_first_block := + // false + bool curr_skipped = false; + if (!is_first_block || coord) { + const MB_MODE_INFO *const mi_prev = *(mi - mode_step); + assert(mi_prev); + const int pv_row = is_vert ? (mi_row) : (mi_row - (1 << scale_vert)); + const int pv_col = is_vert ? (mi_col - (1 << scale_horz)) : (mi_col); + const TX_SIZE pv_ts = + is_first_block ? get_transform_size(xd, mi_prev, pv_row, pv_col, plane, + scale_horz, scale_vert) + : prev_tx_size; + if (is_first_block) { + *min_dim = is_vert ? tx_size_high[pv_ts] : tx_size_wide[pv_ts]; + } + + uint8_t level = + av1_get_filter_level(cm, &cm->lf_info, edge_dir, plane, mbmi); + if (!level) { + level = av1_get_filter_level(cm, &cm->lf_info, edge_dir, plane, mi_prev); + } +#ifndef NDEBUG + if (joint_filter_chroma) { + uint8_t v_level = + av1_get_filter_level(cm, &cm->lf_info, edge_dir, AOM_PLANE_V, mbmi); + if (!v_level) { + v_level = av1_get_filter_level(cm, &cm->lf_info, edge_dir, AOM_PLANE_V, + mi_prev); + } + assert(level == v_level); + } +#else + (void)joint_filter_chroma; +#endif // NDEBUG + const int32_t pu_edge = mi_prev != mbmi; + + if (!pu_edge) { + curr_skipped = mbmi->skip_txfm && is_inter_block(mbmi); + } + // For realtime mode, u and v have the same level + if ((!curr_skipped || pu_edge) && level) { + params->filter_length = is_vert ? vert_filter_length_chroma[ts][pv_ts] + : horz_filter_length_chroma[ts][pv_ts]; + + const loop_filter_thresh *const limits = cm->lf_info.lfthr; + params->lfthr = limits + level; + } + } + const int tx_dim = is_vert ? tx_size_high[ts] : tx_size_wide[ts]; + *min_dim = AOMMIN(*min_dim, tx_dim); +} + +static AOM_FORCE_INLINE void set_lpf_parameters_for_line_chroma( + AV1_DEBLOCKING_PARAMETERS *const params_buf, TX_SIZE *tx_buf, + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const EDGE_DIR edge_dir, uint32_t mi_col, uint32_t mi_row, + const struct macroblockd_plane *const plane_ptr, const uint32_t mi_range, + const ptrdiff_t mode_step, const int scale_horz, const int scale_vert, + int *min_dim, int plane, int joint_filter_chroma) { + const int is_vert = edge_dir == VERT_EDGE; + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + uint32_t *counter_ptr = is_vert ? &mi_col : &mi_row; + const uint32_t scale = is_vert ? scale_horz : scale_vert; + TX_SIZE prev_tx_size = TX_INVALID; + + // Unroll the first iteration of the loop + set_one_param_for_line_chroma(params, tx_size, cm, xd, edge_dir, mi_col, + mi_row, *counter_ptr, true, prev_tx_size, + plane_ptr, mode_step, scale_horz, scale_vert, + min_dim, plane, joint_filter_chroma); + + // Advance + int advance_units = + is_vert ? tx_size_wide_unit[*tx_size] : tx_size_high_unit[*tx_size]; + prev_tx_size = *tx_size; + *counter_ptr += advance_units << scale; + params += advance_units; + tx_size += advance_units; + + while (*counter_ptr < mi_range) { + set_one_param_for_line_chroma(params, tx_size, cm, xd, edge_dir, mi_col, + mi_row, *counter_ptr, false, prev_tx_size, + plane_ptr, mode_step, scale_horz, scale_vert, + min_dim, plane, joint_filter_chroma); + + // Advance + advance_units = + is_vert ? tx_size_wide_unit[*tx_size] : tx_size_high_unit[*tx_size]; + prev_tx_size = *tx_size; + *counter_ptr += advance_units << scale; + params += advance_units; + tx_size += advance_units; + } +} + +static AOM_INLINE void filter_vert(uint8_t *dst, int dst_stride, + const AV1_DEBLOCKING_PARAMETERS *params, + const SequenceHeader *seq_params, + USE_FILTER_TYPE use_filter_type) { + const loop_filter_thresh *limits = params->lfthr; +#if CONFIG_AV1_HIGHBITDEPTH + const int use_highbitdepth = seq_params->use_highbitdepth; + const aom_bit_depth_t bit_depth = seq_params->bit_depth; + if (use_highbitdepth) { + uint16_t *dst_shortptr = CONVERT_TO_SHORTPTR(dst); + if (use_filter_type == USE_QUAD) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_4_dual( + dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + limits->mblim, limits->lim, limits->hev_thr, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_6_dual( + dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + limits->mblim, limits->lim, limits->hev_thr, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_vertical_8_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_8_dual( + dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + limits->mblim, limits->lim, limits->hev_thr, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_vertical_14_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_14_dual( + dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + limits->mblim, limits->lim, limits->hev_thr, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_vertical_8_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_vertical_14_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_vertical_8(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_vertical_14(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // no filtering + default: break; + } + } + return; + } +#endif // CONFIG_AV1_HIGHBITDEPTH + if (use_filter_type == USE_QUAD) { + // Only one set of loop filter parameters (mblim, lim and hev_thr) is + // passed as argument to quad loop filter because quad loop filter is + // called for those cases where all the 4 set of loop filter parameters + // are equal. + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_vertical_8_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_vertical_14_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_vertical_8_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_vertical_14_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_vertical_8(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_vertical_14(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } +#if !CONFIG_AV1_HIGHBITDEPTH + (void)seq_params; +#endif // !CONFIG_AV1_HIGHBITDEPTH +} + +static AOM_INLINE void filter_vert_chroma( + uint8_t *u_dst, uint8_t *v_dst, int dst_stride, + const AV1_DEBLOCKING_PARAMETERS *params, const SequenceHeader *seq_params, + USE_FILTER_TYPE use_filter_type) { + const loop_filter_thresh *u_limits = params->lfthr; + const loop_filter_thresh *v_limits = params->lfthr; +#if CONFIG_AV1_HIGHBITDEPTH + const int use_highbitdepth = seq_params->use_highbitdepth; + const aom_bit_depth_t bit_depth = seq_params->bit_depth; + if (use_highbitdepth) { + uint16_t *u_dst_shortptr = CONVERT_TO_SHORTPTR(u_dst); + uint16_t *v_dst_shortptr = CONVERT_TO_SHORTPTR(v_dst); + if (use_filter_type == USE_QUAD) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_4_dual( + u_dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + u_limits->mblim, u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_4_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_4_dual( + v_dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + v_limits->mblim, v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, v_limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_6_dual( + u_dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + u_limits->mblim, u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_6_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_6_dual( + v_dst_shortptr + (2 * MI_SIZE * dst_stride), dst_stride, + v_limits->mblim, v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, v_limits->hev_thr, bit_depth); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_4_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_vertical_6_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_vertical_4(u_dst_shortptr, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_4(v_dst_shortptr, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_vertical_6(u_dst_shortptr, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + bit_depth); + aom_highbd_lpf_vertical_6(v_dst_shortptr, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + bit_depth); + break; + case 8: + case 14: assert(0); break; + // no filtering + default: break; + } + } + return; + } +#endif // CONFIG_AV1_HIGHBITDEPTH + if (use_filter_type == USE_QUAD) { + // Only one set of loop filter parameters (mblim, lim and hev_thr) is + // passed as argument to quad loop filter because quad loop filter is + // called for those cases where all the 4 set of loop filter parameters + // are equal. + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4_quad(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr); + aom_lpf_vertical_4_quad(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6_quad(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr); + aom_lpf_vertical_6_quad(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4_dual(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_vertical_4_dual(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6_dual(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_vertical_6_dual(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_vertical_4(u_dst, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_vertical_4(v_dst, dst_stride, v_limits->mblim, v_limits->lim, + u_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_vertical_6(u_dst, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_vertical_6(v_dst, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 8: + case 14: assert(0); break; + // no filtering + default: break; + } + } +#if !CONFIG_AV1_HIGHBITDEPTH + (void)seq_params; +#endif // !CONFIG_AV1_HIGHBITDEPTH +} + +void av1_filter_block_plane_vert(const AV1_COMMON *const cm, + const MACROBLOCKD *const xd, const int plane, + const MACROBLOCKD_PLANE *const plane_ptr, + const uint32_t mi_row, const uint32_t mi_col) { + const uint32_t scale_horz = plane_ptr->subsampling_x; + const uint32_t scale_vert = plane_ptr->subsampling_y; + uint8_t *const dst_ptr = plane_ptr->dst.buf; + const int dst_stride = plane_ptr->dst.stride; + const int plane_mi_rows = + ROUND_POWER_OF_TWO(cm->mi_params.mi_rows, scale_vert); + const int plane_mi_cols = + ROUND_POWER_OF_TWO(cm->mi_params.mi_cols, scale_horz); + const int y_range = AOMMIN((int)(plane_mi_rows - (mi_row >> scale_vert)), + (MAX_MIB_SIZE >> scale_vert)); + const int x_range = AOMMIN((int)(plane_mi_cols - (mi_col >> scale_horz)), + (MAX_MIB_SIZE >> scale_horz)); + + for (int y = 0; y < y_range; y++) { + uint8_t *p = dst_ptr + y * MI_SIZE * dst_stride; + for (int x = 0; x < x_range;) { + // inner loop always filter vertical edges in a MI block. If MI size + // is 8x8, it will filter the vertical edge aligned with a 8x8 block. + // If 4x4 transform is used, it will then filter the internal edge + // aligned with a 4x4 block + const uint32_t curr_x = ((mi_col * MI_SIZE) >> scale_horz) + x * MI_SIZE; + const uint32_t curr_y = ((mi_row * MI_SIZE) >> scale_vert) + y * MI_SIZE; + uint32_t advance_units; + TX_SIZE tx_size; + AV1_DEBLOCKING_PARAMETERS params; + memset(¶ms, 0, sizeof(params)); + + tx_size = + set_lpf_parameters(¶ms, ((ptrdiff_t)1 << scale_horz), cm, xd, + VERT_EDGE, curr_x, curr_y, plane, plane_ptr); + if (tx_size == TX_INVALID) { + params.filter_length = 0; + tx_size = TX_4X4; + } + + filter_vert(p, dst_stride, ¶ms, cm->seq_params, USE_SINGLE); + + // advance the destination pointer + advance_units = tx_size_wide_unit[tx_size]; + x += advance_units; + p += advance_units * MI_SIZE; + } + } +} + +void av1_filter_block_plane_vert_opt( + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const MACROBLOCKD_PLANE *const plane_ptr, const uint32_t mi_row, + const uint32_t mi_col, AV1_DEBLOCKING_PARAMETERS *params_buf, + TX_SIZE *tx_buf, int num_mis_in_lpf_unit_height_log2) { + uint8_t *const dst_ptr = plane_ptr->dst.buf; + const int dst_stride = plane_ptr->dst.stride; + // Ensure that mi_cols/mi_rows are calculated based on frame dimension aligned + // to MI_SIZE. + const int plane_mi_cols = + CEIL_POWER_OF_TWO(plane_ptr->dst.width, MI_SIZE_LOG2); + const int plane_mi_rows = + CEIL_POWER_OF_TWO(plane_ptr->dst.height, MI_SIZE_LOG2); + // Whenever 'pipeline_lpf_mt_with_enc' is enabled, height of the unit to + // filter (i.e., y_range) is calculated based on the size of the superblock + // used. + const int y_range = AOMMIN((int)(plane_mi_rows - mi_row), + (1 << num_mis_in_lpf_unit_height_log2)); + // Width of the unit to filter (i.e., x_range) should always be calculated + // based on maximum superblock size as this function is called for mi_col = 0, + // MAX_MIB_SIZE, 2 * MAX_MIB_SIZE etc. + const int x_range = AOMMIN((int)(plane_mi_cols - mi_col), MAX_MIB_SIZE); + const ptrdiff_t mode_step = 1; + for (int y = 0; y < y_range; y++) { + const uint32_t curr_y = mi_row + y; + const uint32_t x_start = mi_col; + const uint32_t x_end = mi_col + x_range; + int min_block_height = block_size_high[BLOCK_128X128]; + set_lpf_parameters_for_line_luma(params_buf, tx_buf, cm, xd, VERT_EDGE, + x_start, curr_y, plane_ptr, x_end, + mode_step, &min_block_height); + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + USE_FILTER_TYPE use_filter_type = USE_SINGLE; + + uint8_t *p = dst_ptr + y * MI_SIZE * dst_stride; + + if ((y & 3) == 0 && (y + 3) < y_range && min_block_height >= 16) { + // If we are on a row which is a multiple of 4, and the minimum height is + // 16 pixels, then the current and right 3 cols must contain the same + // prediction block. This is because dim 16 can only happen every unit of + // 4 mi's. + use_filter_type = USE_QUAD; + y += 3; + } else if ((y + 1) < y_range && min_block_height >= 8) { + use_filter_type = USE_DUAL; + y += 1; + } + + for (int x = 0; x < x_range;) { + if (*tx_size == TX_INVALID) { + params->filter_length = 0; + *tx_size = TX_4X4; + } + + filter_vert(p, dst_stride, params, cm->seq_params, use_filter_type); + + // advance the destination pointer + const uint32_t advance_units = tx_size_wide_unit[*tx_size]; + x += advance_units; + p += advance_units * MI_SIZE; + params += advance_units; + tx_size += advance_units; + } + } +} + +void av1_filter_block_plane_vert_opt_chroma( + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const MACROBLOCKD_PLANE *const plane_ptr, const uint32_t mi_row, + const uint32_t mi_col, AV1_DEBLOCKING_PARAMETERS *params_buf, + TX_SIZE *tx_buf, int plane, bool joint_filter_chroma, + int num_mis_in_lpf_unit_height_log2) { + const uint32_t scale_horz = plane_ptr->subsampling_x; + const uint32_t scale_vert = plane_ptr->subsampling_y; + const int dst_stride = plane_ptr->dst.stride; + // Ensure that mi_cols/mi_rows are calculated based on frame dimension aligned + // to MI_SIZE. + const int mi_cols = + ((plane_ptr->dst.width << scale_horz) + MI_SIZE - 1) >> MI_SIZE_LOG2; + const int mi_rows = + ((plane_ptr->dst.height << scale_vert) + MI_SIZE - 1) >> MI_SIZE_LOG2; + const int plane_mi_rows = ROUND_POWER_OF_TWO(mi_rows, scale_vert); + const int plane_mi_cols = ROUND_POWER_OF_TWO(mi_cols, scale_horz); + const int y_range = + AOMMIN((int)(plane_mi_rows - (mi_row >> scale_vert)), + ((1 << num_mis_in_lpf_unit_height_log2) >> scale_vert)); + const int x_range = AOMMIN((int)(plane_mi_cols - (mi_col >> scale_horz)), + (MAX_MIB_SIZE >> scale_horz)); + const ptrdiff_t mode_step = (ptrdiff_t)1 << scale_horz; + + for (int y = 0; y < y_range; y++) { + const uint32_t curr_y = mi_row + (y << scale_vert); + const uint32_t x_start = mi_col + (0 << scale_horz); + const uint32_t x_end = mi_col + (x_range << scale_horz); + int min_height = tx_size_high[TX_64X64]; + set_lpf_parameters_for_line_chroma(params_buf, tx_buf, cm, xd, VERT_EDGE, + x_start, curr_y, plane_ptr, x_end, + mode_step, scale_horz, scale_vert, + &min_height, plane, joint_filter_chroma); + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + int use_filter_type = USE_SINGLE; + int y_inc = 0; + + if ((y & 3) == 0 && (y + 3) < y_range && min_height >= 16) { + // If we are on a row which is a multiple of 4, and the minimum height is + // 16 pixels, then the current and below 3 rows must contain the same tx + // block. This is because dim 16 can only happen every unit of 4 mi's. + use_filter_type = USE_QUAD; + y_inc = 3; + } else if (y % 2 == 0 && (y + 1) < y_range && min_height >= 8) { + // If we are on an even row, and the minimum height is 8 pixels, then the + // current and below rows must contain the same tx block. This is because + // dim 4 can only happen every unit of 2**0, and 8 every unit of 2**1, + // etc. + use_filter_type = USE_DUAL; + y_inc = 1; + } + + for (int x = 0; x < x_range;) { + // inner loop always filter vertical edges in a MI block. If MI size + // is 8x8, it will filter the vertical edge aligned with a 8x8 block. + // If 4x4 transform is used, it will then filter the internal edge + // aligned with a 4x4 block + if (*tx_size == TX_INVALID) { + params->filter_length = 0; + *tx_size = TX_4X4; + } + + const int offset = y * MI_SIZE * dst_stride + x * MI_SIZE; + if (joint_filter_chroma) { + uint8_t *u_dst = plane_ptr[0].dst.buf + offset; + uint8_t *v_dst = plane_ptr[1].dst.buf + offset; + filter_vert_chroma(u_dst, v_dst, dst_stride, params, cm->seq_params, + use_filter_type); + } else { + uint8_t *dst_ptr = plane_ptr->dst.buf + offset; + filter_vert(dst_ptr, dst_stride, params, cm->seq_params, + use_filter_type); + } + + // advance the destination pointer + const uint32_t advance_units = tx_size_wide_unit[*tx_size]; + x += advance_units; + params += advance_units; + tx_size += advance_units; + } + y += y_inc; + } +} + +static AOM_INLINE void filter_horz(uint8_t *dst, int dst_stride, + const AV1_DEBLOCKING_PARAMETERS *params, + const SequenceHeader *seq_params, + USE_FILTER_TYPE use_filter_type) { + const loop_filter_thresh *limits = params->lfthr; +#if CONFIG_AV1_HIGHBITDEPTH + const int use_highbitdepth = seq_params->use_highbitdepth; + const aom_bit_depth_t bit_depth = seq_params->bit_depth; + if (use_highbitdepth) { + uint16_t *dst_shortptr = CONVERT_TO_SHORTPTR(dst); + if (use_filter_type == USE_QUAD) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_horizontal_4_dual( + dst_shortptr + (2 * MI_SIZE), dst_stride, limits->mblim, + limits->lim, limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_horizontal_6_dual( + dst_shortptr + (2 * MI_SIZE), dst_stride, limits->mblim, + limits->lim, limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr, bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_horizontal_8_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_horizontal_8_dual( + dst_shortptr + (2 * MI_SIZE), dst_stride, limits->mblim, + limits->lim, limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr, bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_horizontal_14_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + aom_highbd_lpf_horizontal_14_dual( + dst_shortptr + (2 * MI_SIZE), dst_stride, limits->mblim, + limits->lim, limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr, bit_depth); + break; + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_horizontal_8_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_horizontal_14_dual( + dst_shortptr, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, limits->hev_thr, + bit_depth); + break; + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 8-tap filtering + case 8: + aom_highbd_lpf_horizontal_8(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // apply 14-tap filtering + case 14: + aom_highbd_lpf_horizontal_14(dst_shortptr, dst_stride, limits->mblim, + limits->lim, limits->hev_thr, bit_depth); + break; + // no filtering + default: break; + } + } + return; + } +#endif // CONFIG_AV1_HIGHBITDEPTH + if (use_filter_type == USE_QUAD) { + // Only one set of loop filter parameters (mblim, lim and hev_thr) is + // passed as argument to quad loop filter because quad loop filter is + // called for those cases where all the 4 set of loop filter parameters + // are equal. + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_horizontal_8_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_horizontal_14_quad(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_horizontal_8_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_horizontal_14_dual(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 8-tap filtering + case 8: + aom_lpf_horizontal_8(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // apply 14-tap filtering + case 14: + aom_lpf_horizontal_14(dst, dst_stride, limits->mblim, limits->lim, + limits->hev_thr); + break; + // no filtering + default: break; + } + } +#if !CONFIG_AV1_HIGHBITDEPTH + (void)seq_params; +#endif // !CONFIG_AV1_HIGHBITDEPTH +} + +static AOM_INLINE void filter_horz_chroma( + uint8_t *u_dst, uint8_t *v_dst, int dst_stride, + const AV1_DEBLOCKING_PARAMETERS *params, const SequenceHeader *seq_params, + USE_FILTER_TYPE use_filter_type) { + const loop_filter_thresh *u_limits = params->lfthr; + const loop_filter_thresh *v_limits = params->lfthr; +#if CONFIG_AV1_HIGHBITDEPTH + const int use_highbitdepth = seq_params->use_highbitdepth; + const aom_bit_depth_t bit_depth = seq_params->bit_depth; + if (use_highbitdepth) { + uint16_t *u_dst_shortptr = CONVERT_TO_SHORTPTR(u_dst); + uint16_t *v_dst_shortptr = CONVERT_TO_SHORTPTR(v_dst); + if (use_filter_type == USE_QUAD) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_4_dual( + u_dst_shortptr + (2 * MI_SIZE), dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_4_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_4_dual( + v_dst_shortptr + (2 * MI_SIZE), dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_6_dual( + u_dst_shortptr + (2 * MI_SIZE), dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_6_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_6_dual( + v_dst_shortptr + (2 * MI_SIZE), dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_4_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6_dual( + u_dst_shortptr, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_6_dual( + v_dst_shortptr, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_highbd_lpf_horizontal_4(u_dst_shortptr, dst_stride, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_4(v_dst_shortptr, dst_stride, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_highbd_lpf_horizontal_6(u_dst_shortptr, dst_stride, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr, bit_depth); + aom_highbd_lpf_horizontal_6(v_dst_shortptr, dst_stride, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr, bit_depth); + break; + case 8: + case 14: assert(0); break; + // no filtering + default: break; + } + } + return; + } +#endif // CONFIG_AV1_HIGHBITDEPTH + if (use_filter_type == USE_QUAD) { + // Only one set of loop filter parameters (mblim, lim and hev_thr) is + // passed as argument to quad loop filter because quad loop filter is + // called for those cases where all the 4 set of loop filter parameters + // are equal. + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4_quad(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr); + aom_lpf_horizontal_4_quad(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6_quad(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr); + aom_lpf_horizontal_6_quad(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else if (use_filter_type == USE_DUAL) { + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4_dual(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_horizontal_4_dual(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6_dual(u_dst, dst_stride, u_limits->mblim, + u_limits->lim, u_limits->hev_thr, + u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_horizontal_6_dual(v_dst, dst_stride, v_limits->mblim, + v_limits->lim, v_limits->hev_thr, + v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 8: + case 14: assert(0); + // no filtering + default: break; + } + } else { + assert(use_filter_type == USE_SINGLE); + switch (params->filter_length) { + // apply 4-tap filtering + case 4: + aom_lpf_horizontal_4(u_dst, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_horizontal_4(v_dst, dst_stride, v_limits->mblim, v_limits->lim, + u_limits->hev_thr); + break; + case 6: // apply 6-tap filter for chroma plane only + aom_lpf_horizontal_6(u_dst, dst_stride, u_limits->mblim, u_limits->lim, + u_limits->hev_thr); + aom_lpf_horizontal_6(v_dst, dst_stride, v_limits->mblim, v_limits->lim, + v_limits->hev_thr); + break; + case 8: + case 14: assert(0); break; + // no filtering + default: break; + } + } +#if !CONFIG_AV1_HIGHBITDEPTH + (void)seq_params; +#endif // !CONFIG_AV1_HIGHBITDEPTH +} + +void av1_filter_block_plane_horz(const AV1_COMMON *const cm, + const MACROBLOCKD *const xd, const int plane, + const MACROBLOCKD_PLANE *const plane_ptr, + const uint32_t mi_row, const uint32_t mi_col) { + const uint32_t scale_horz = plane_ptr->subsampling_x; + const uint32_t scale_vert = plane_ptr->subsampling_y; + uint8_t *const dst_ptr = plane_ptr->dst.buf; + const int dst_stride = plane_ptr->dst.stride; + const int plane_mi_rows = + ROUND_POWER_OF_TWO(cm->mi_params.mi_rows, scale_vert); + const int plane_mi_cols = + ROUND_POWER_OF_TWO(cm->mi_params.mi_cols, scale_horz); + const int y_range = AOMMIN((int)(plane_mi_rows - (mi_row >> scale_vert)), + (MAX_MIB_SIZE >> scale_vert)); + const int x_range = AOMMIN((int)(plane_mi_cols - (mi_col >> scale_horz)), + (MAX_MIB_SIZE >> scale_horz)); + for (int x = 0; x < x_range; x++) { + uint8_t *p = dst_ptr + x * MI_SIZE; + for (int y = 0; y < y_range;) { + // inner loop always filter vertical edges in a MI block. If MI size + // is 8x8, it will first filter the vertical edge aligned with a 8x8 + // block. If 4x4 transform is used, it will then filter the internal + // edge aligned with a 4x4 block + const uint32_t curr_x = ((mi_col * MI_SIZE) >> scale_horz) + x * MI_SIZE; + const uint32_t curr_y = ((mi_row * MI_SIZE) >> scale_vert) + y * MI_SIZE; + uint32_t advance_units; + TX_SIZE tx_size; + AV1_DEBLOCKING_PARAMETERS params; + memset(¶ms, 0, sizeof(params)); + + tx_size = set_lpf_parameters( + ¶ms, (cm->mi_params.mi_stride << scale_vert), cm, xd, HORZ_EDGE, + curr_x, curr_y, plane, plane_ptr); + if (tx_size == TX_INVALID) { + params.filter_length = 0; + tx_size = TX_4X4; + } + + filter_horz(p, dst_stride, ¶ms, cm->seq_params, USE_SINGLE); + + // advance the destination pointer + advance_units = tx_size_high_unit[tx_size]; + y += advance_units; + p += advance_units * dst_stride * MI_SIZE; + } + } +} + +void av1_filter_block_plane_horz_opt( + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const MACROBLOCKD_PLANE *const plane_ptr, const uint32_t mi_row, + const uint32_t mi_col, AV1_DEBLOCKING_PARAMETERS *params_buf, + TX_SIZE *tx_buf, int num_mis_in_lpf_unit_height_log2) { + uint8_t *const dst_ptr = plane_ptr->dst.buf; + const int dst_stride = plane_ptr->dst.stride; + // Ensure that mi_cols/mi_rows are calculated based on frame dimension aligned + // to MI_SIZE. + const int plane_mi_cols = + CEIL_POWER_OF_TWO(plane_ptr->dst.width, MI_SIZE_LOG2); + const int plane_mi_rows = + CEIL_POWER_OF_TWO(plane_ptr->dst.height, MI_SIZE_LOG2); + const int y_range = AOMMIN((int)(plane_mi_rows - mi_row), + (1 << num_mis_in_lpf_unit_height_log2)); + const int x_range = AOMMIN((int)(plane_mi_cols - mi_col), MAX_MIB_SIZE); + + const ptrdiff_t mode_step = cm->mi_params.mi_stride; + for (int x = 0; x < x_range; x++) { + const uint32_t curr_x = mi_col + x; + const uint32_t y_start = mi_row; + const uint32_t y_end = mi_row + y_range; + int min_block_width = block_size_high[BLOCK_128X128]; + set_lpf_parameters_for_line_luma(params_buf, tx_buf, cm, xd, HORZ_EDGE, + curr_x, y_start, plane_ptr, y_end, + mode_step, &min_block_width); + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + USE_FILTER_TYPE filter_type = USE_SINGLE; + + uint8_t *p = dst_ptr + x * MI_SIZE; + + if ((x & 3) == 0 && (x + 3) < x_range && min_block_width >= 16) { + // If we are on a col which is a multiple of 4, and the minimum width is + // 16 pixels, then the current and right 3 cols must contain the same + // prediction block. This is because dim 16 can only happen every unit of + // 4 mi's. + filter_type = USE_QUAD; + x += 3; + } else if ((x + 1) < x_range && min_block_width >= 8) { + filter_type = USE_DUAL; + x += 1; + } + + for (int y = 0; y < y_range;) { + if (*tx_size == TX_INVALID) { + params->filter_length = 0; + *tx_size = TX_4X4; + } + + filter_horz(p, dst_stride, params, cm->seq_params, filter_type); + + // advance the destination pointer + const uint32_t advance_units = tx_size_high_unit[*tx_size]; + y += advance_units; + p += advance_units * dst_stride * MI_SIZE; + params += advance_units; + tx_size += advance_units; + } + } +} + +void av1_filter_block_plane_horz_opt_chroma( + const AV1_COMMON *const cm, const MACROBLOCKD *const xd, + const MACROBLOCKD_PLANE *const plane_ptr, const uint32_t mi_row, + const uint32_t mi_col, AV1_DEBLOCKING_PARAMETERS *params_buf, + TX_SIZE *tx_buf, int plane, bool joint_filter_chroma, + int num_mis_in_lpf_unit_height_log2) { + const uint32_t scale_horz = plane_ptr->subsampling_x; + const uint32_t scale_vert = plane_ptr->subsampling_y; + const int dst_stride = plane_ptr->dst.stride; + // Ensure that mi_cols/mi_rows are calculated based on frame dimension aligned + // to MI_SIZE. + const int mi_cols = + ((plane_ptr->dst.width << scale_horz) + MI_SIZE - 1) >> MI_SIZE_LOG2; + const int mi_rows = + ((plane_ptr->dst.height << scale_vert) + MI_SIZE - 1) >> MI_SIZE_LOG2; + const int plane_mi_rows = ROUND_POWER_OF_TWO(mi_rows, scale_vert); + const int plane_mi_cols = ROUND_POWER_OF_TWO(mi_cols, scale_horz); + const int y_range = + AOMMIN((int)(plane_mi_rows - (mi_row >> scale_vert)), + ((1 << num_mis_in_lpf_unit_height_log2) >> scale_vert)); + const int x_range = AOMMIN((int)(plane_mi_cols - (mi_col >> scale_horz)), + (MAX_MIB_SIZE >> scale_horz)); + const ptrdiff_t mode_step = cm->mi_params.mi_stride << scale_vert; + for (int x = 0; x < x_range; x++) { + const uint32_t y_start = mi_row + (0 << scale_vert); + const uint32_t curr_x = mi_col + (x << scale_horz); + const uint32_t y_end = mi_row + (y_range << scale_vert); + int min_width = tx_size_wide[TX_64X64]; + set_lpf_parameters_for_line_chroma(params_buf, tx_buf, cm, xd, HORZ_EDGE, + curr_x, y_start, plane_ptr, y_end, + mode_step, scale_horz, scale_vert, + &min_width, plane, joint_filter_chroma); + + AV1_DEBLOCKING_PARAMETERS *params = params_buf; + TX_SIZE *tx_size = tx_buf; + USE_FILTER_TYPE use_filter_type = USE_SINGLE; + int x_inc = 0; + + if ((x & 3) == 0 && (x + 3) < x_range && min_width >= 16) { + // If we are on a col which is a multiple of 4, and the minimum width is + // 16 pixels, then the current and right 3 cols must contain the same tx + // block. This is because dim 16 can only happen every unit of 4 mi's. + use_filter_type = USE_QUAD; + x_inc = 3; + } else if (x % 2 == 0 && (x + 1) < x_range && min_width >= 8) { + // If we are on an even col, and the minimum width is 8 pixels, then the + // current and left cols must contain the same tx block. This is because + // dim 4 can only happen every unit of 2**0, and 8 every unit of 2**1, + // etc. + use_filter_type = USE_DUAL; + x_inc = 1; + } + + for (int y = 0; y < y_range;) { + // inner loop always filter vertical edges in a MI block. If MI size + // is 8x8, it will first filter the vertical edge aligned with a 8x8 + // block. If 4x4 transform is used, it will then filter the internal + // edge aligned with a 4x4 block + if (*tx_size == TX_INVALID) { + params->filter_length = 0; + *tx_size = TX_4X4; + } + + const int offset = y * MI_SIZE * dst_stride + x * MI_SIZE; + if (joint_filter_chroma) { + uint8_t *u_dst = plane_ptr[0].dst.buf + offset; + uint8_t *v_dst = plane_ptr[1].dst.buf + offset; + filter_horz_chroma(u_dst, v_dst, dst_stride, params, cm->seq_params, + use_filter_type); + } else { + uint8_t *dst_ptr = plane_ptr->dst.buf + offset; + filter_horz(dst_ptr, dst_stride, params, cm->seq_params, + use_filter_type); + } + + // advance the destination pointer + const int advance_units = tx_size_high_unit[*tx_size]; + y += advance_units; + params += advance_units; + tx_size += advance_units; + } + x += x_inc; + } +} |