summaryrefslogtreecommitdiffstats
path: root/xpcom/docs/stringguide.rst
diff options
context:
space:
mode:
Diffstat (limited to 'xpcom/docs/stringguide.rst')
-rw-r--r--xpcom/docs/stringguide.rst1094
1 files changed, 1094 insertions, 0 deletions
diff --git a/xpcom/docs/stringguide.rst b/xpcom/docs/stringguide.rst
new file mode 100644
index 0000000000..a3266d9604
--- /dev/null
+++ b/xpcom/docs/stringguide.rst
@@ -0,0 +1,1094 @@
+String Guide
+============
+
+Most of the Mozilla code uses a C++ class hierarchy to pass string data,
+rather than using raw pointers. This guide documents the string classes which
+are visible to code within the Mozilla codebase (code which is linked into
+``libxul``).
+
+Introduction
+------------
+
+The string classes are a library of C++ classes which are used to manage
+buffers of wide (16-bit) and narrow (8-bit) character strings. The headers
+and implementation are in the `xpcom/string
+<https://searchfox.org/mozilla-central/source/xpcom/string>`_ directory. All
+strings are stored as a single contiguous buffer of characters.
+
+The 8-bit and 16-bit string classes have completely separate base classes,
+but share the same APIs. As a result, you cannot assign a 8-bit string to a
+16-bit string without some kind of conversion helper class or routine. For
+the purpose of this document, we will refer to the 16-bit string classes in
+class documentation. Every 16-bit class has an equivalent 8-bit class:
+
+===================== ======================
+Wide Narrow
+===================== ======================
+``nsAString`` ``nsACString``
+``nsString`` ``nsCString``
+``nsAutoString`` ``nsAutoCString``
+``nsDependentString`` ``nsDependentCString``
+===================== ======================
+
+The string classes distinguish, as part of the type hierarchy, between
+strings that must have a null-terminator at the end of their buffer
+(``ns[C]String``) and strings that are not required to have a null-terminator
+(``nsA[C]String``). nsA[C]String is the base of the string classes (since it
+imposes fewer requirements) and ``ns[C]String`` is a class derived from it.
+Functions taking strings as parameters should generally take one of these
+four types.
+
+In order to avoid unnecessary copying of string data (which can have
+significant performance cost), the string classes support different ownership
+models. All string classes support the following three ownership models
+dynamically:
+
+* reference counted, copy-on-write, buffers (the default)
+
+* adopted buffers (a buffer that the string class owns, but is not reference
+ counted, because it came from somewhere else)
+
+* dependent buffers, that is, an underlying buffer that the string class does
+ not own, but that the caller that constructed the string guarantees will
+ outlive the string instance
+
+Auto strings will prefer reference counting an existing reference-counted
+buffer over their stack buffer, but will otherwise use their stack buffer for
+anything that will fit in it.
+
+There are a number of additional string classes:
+
+
+* Classes which exist primarily as constructors for the other types,
+ particularly ``nsDependent[C]String`` and ``nsDependent[C]Substring``. These
+ types are really just convenient notation for constructing an
+ ``nsA[C]String`` with a non-default ownership mode; they should not be
+ thought of as different types.
+
+* ``nsLiteral[C]String`` which should rarely be constructed explicitly but
+ usually through the ``""_ns`` and ``u""_ns`` user-defined string literals.
+ ``nsLiteral[C]String`` is trivially constructible and destructible, and
+ therefore does not emit construction/destruction code when stored in static,
+ as opposed to the other string classes.
+
+The Major String Classes
+------------------------
+
+The list below describes the main base classes. Once you are familiar with
+them, see the appendix describing What Class to Use When.
+
+
+* **nsAString**/**nsACString**: the abstract base class for all strings. It
+ provides an API for assignment, individual character access, basic
+ manipulation of characters in the string, and string comparison. This class
+ corresponds to the XPIDL ``AString`` or ``ACString`` parameter types.
+ ``nsA[C]String`` is not necessarily null-terminated.
+
+* **nsString**/**nsCString**: builds on ``nsA[C]String`` by guaranteeing a
+ null-terminated storage. This allows for a method (``.get()``) to access the
+ underlying character buffer.
+
+The remainder of the string classes inherit from either ``nsA[C]String`` or
+``ns[C]String``. Thus, every string class is compatible with ``nsA[C]String``.
+
+.. note::
+
+ In code which is generic over string width, ``nsA[C]String`` is sometimes
+ known as ``nsTSubstring<CharT>``. ``nsAString`` is a type alias for
+ ``nsTSubstring<char16_t>``, and ``nsACString`` is a type alias for
+ ``nsTSubstring<char>``.
+
+.. note::
+
+ The type ``nsLiteral[C]String`` technically does not inherit from
+ ``nsA[C]String``, but instead inherits from ``nsStringRepr<CharT>``. This
+ allows the type to not generate destructors when stored in static
+ storage.
+
+ It can be implicitly coerced to ``const ns[C]String&`` (though can never
+ be accessed mutably) and generally acts as-if it was a subclass of
+ ``ns[C]String`` in most cases.
+
+Since every string derives from ``nsAString`` (or ``nsACString``), they all
+share a simple API. Common read-only methods include:
+
+* ``.Length()`` - the number of code units (bytes for 8-bit string classes and ``char16_t`` for 16-bit string classes) in the string.
+* ``.IsEmpty()`` - the fastest way of determining if the string has any value. Use this instead of testing ``string.Length() == 0``
+* ``.Equals(string)`` - ``true`` if the given string has the same value as the current string. Approximately the same as ``operator==``.
+
+Common methods that modify the string:
+
+* ``.Assign(string)`` - Assigns a new value to the string. Approximately the same as ``operator=``.
+* ``.Append(string)`` - Appends a value to the string.
+* ``.Insert(string, position)`` - Inserts the given string before the code unit at position.
+* ``.Truncate(length)`` - shortens the string to the given length.
+
+More complete documentation can be found in the `Class Reference`_.
+
+As function parameters
+~~~~~~~~~~~~~~~~~~~~~~
+
+In general, use ``nsA[C]String`` references to pass strings across modules. For example:
+
+.. code-block:: cpp
+
+ // when passing a string to a method, use const nsAString&
+ nsFoo::PrintString(const nsAString& str);
+
+ // when getting a string from a method, use nsAString&
+ nsFoo::GetString(nsAString& result);
+
+The Concrete Classes - which classes to use when
+------------------------------------------------
+
+The concrete classes are for use in code that actually needs to store string
+data. The most common uses of the concrete classes are as local variables,
+and members in classes or structs.
+
+.. digraph:: concreteclasses
+
+ node [shape=rectangle]
+
+ "nsA[C]String" -> "ns[C]String";
+ "ns[C]String" -> "nsDependent[C]String";
+ "nsA[C]String" -> "nsDependent[C]Substring";
+ "nsA[C]String" -> "ns[C]SubstringTuple";
+ "ns[C]String" -> "nsAuto[C]StringN";
+ "ns[C]String" -> "nsLiteral[C]String" [style=dashed];
+ "nsAuto[C]StringN" -> "nsPromiseFlat[C]String";
+ "nsAuto[C]StringN" -> "nsPrintfCString";
+
+The following is a list of the most common concrete classes. Once you are
+familiar with them, see the appendix describing What Class to Use When.
+
+* ``ns[C]String`` - a null-terminated string whose buffer is allocated on the
+ heap. Destroys its buffer when the string object goes away.
+
+* ``nsAuto[C]String`` - derived from ``nsString``, a string which owns a 64
+ code unit buffer in the same storage space as the string itself. If a string
+ less than 64 code units is assigned to an ``nsAutoString``, then no extra
+ storage will be allocated. For larger strings, a new buffer is allocated on
+ the heap.
+
+ If you want a number other than 64, use the templated types ``nsAutoStringN``
+ / ``nsAutoCStringN``. (``nsAutoString`` and ``nsAutoCString`` are just
+ typedefs for ``nsAutoStringN<64>`` and ``nsAutoCStringN<64>``, respectively.)
+
+* ``nsDependent[C]String`` - derived from ``nsString``, this string does not
+ own its buffer. It is useful for converting a raw string pointer (``const
+ char16_t*`` or ``const char*``) into a class of type ``nsAString``. Note that
+ you must null-terminate buffers used by to ``nsDependentString``. If you
+ don't want to or can't null-terminate the buffer, use
+ ``nsDependentSubstring``.
+
+* ``nsPrintfCString`` - derived from ``nsCString``, this string behaves like an
+ ``nsAutoCString``. The constructor takes parameters which allows it to
+ construct a 8-bit string from a printf-style format string and parameter
+ list.
+
+There are also a number of concrete classes that are created as a side-effect
+of helper routines, etc. You should avoid direct use of these classes. Let
+the string library create the class for you.
+
+* ``ns[C]SubstringTuple`` - created via string concatenation
+* ``nsDependent[C]Substring`` - created through ``Substring()``
+* ``nsPromiseFlat[C]String`` - created through ``PromiseFlatString()``
+* ``nsLiteral[C]String`` - created through the ``""_ns`` and ``u""_ns`` user-defined literals
+
+Of course, there are times when it is necessary to reference these string
+classes in your code, but as a general rule they should be avoided.
+
+Iterators
+---------
+
+Because Mozilla strings are always a single buffer, iteration over the
+characters in the string is done using raw pointers:
+
+.. code-block:: cpp
+
+ /**
+ * Find whether there is a tab character in `data`
+ */
+ bool HasTab(const nsAString& data) {
+ const char16_t* cur = data.BeginReading();
+ const char16_t* end = data.EndReading();
+
+ for (; cur < end; ++cur) {
+ if (char16_t('\t') == *cur) {
+ return true;
+ }
+ }
+ return false;
+ }
+
+Note that ``end`` points to the character after the end of the string buffer.
+It should never be dereferenced.
+
+Writing to a mutable string is also simple:
+
+.. code-block:: cpp
+
+ /**
+ * Replace every tab character in `data` with a space.
+ */
+ void ReplaceTabs(nsAString& data) {
+ char16_t* cur = data.BeginWriting();
+ char16_t* end = data.EndWriting();
+
+ for (; cur < end; ++cur) {
+ if (char16_t('\t') == *cur) {
+ *cur = char16_t(' ');
+ }
+ }
+ }
+
+You may change the length of a string via ``SetLength()``. Note that
+Iterators become invalid after changing the length of a string. If a string
+buffer becomes smaller while writing it, use ``SetLength`` to inform the
+string class of the new size:
+
+.. code-block:: cpp
+
+ /**
+ * Remove every tab character from `data`
+ */
+ void RemoveTabs(nsAString& data) {
+ int len = data.Length();
+ char16_t* cur = data.BeginWriting();
+ char16_t* end = data.EndWriting();
+
+ while (cur < end) {
+ if (char16_t('\t') == *cur) {
+ len -= 1;
+ end -= 1;
+ if (cur < end)
+ memmove(cur, cur + 1, (end - cur) * sizeof(char16_t));
+ } else {
+ cur += 1;
+ }
+ }
+
+ data.SetLength(len);
+ }
+
+Note that using ``BeginWriting()`` to make a string longer is not OK.
+``BeginWriting()`` must not be used to write past the logical length of the
+string indicated by ``EndWriting()`` or ``Length()``. Calling
+``SetCapacity()`` before ``BeginWriting()`` does not affect what the previous
+sentence says. To make the string longer, call ``SetLength()`` before
+``BeginWriting()`` or use the ``BulkWrite()`` API described below.
+
+Bulk Write
+----------
+
+``BulkWrite()`` allows capacity-aware cache-friendly low-level writes to the
+string's buffer.
+
+Capacity-aware means that the caller is made aware of how the
+caller-requested buffer capacity was rounded up to mozjemalloc buckets. This
+is useful when initially requesting best-case buffer size without yet knowing
+the true size need. If the data that actually needs to be written is larger
+than the best-case estimate but still fits within the rounded-up capacity,
+there is no need to reallocate despite requesting the best-case capacity.
+
+Cache-friendly means that the zero terminator for C compatibility is written
+after the new content of the string has been written, so the result is a
+forward-only linear write access pattern instead of a non-linear
+back-and-forth sequence resulting from using ``SetLength()`` followed by
+``BeginWriting()``.
+
+Low-level means that writing via a raw pointer is possible as with
+``BeginWriting()``.
+
+``BulkWrite()`` takes three arguments: The new capacity (which may be rounded
+up), the number of code units at the beginning of the string to preserve
+(typically the old logical length), and a boolean indicating whether
+reallocating a smaller buffer is OK if the requested capacity would fit in a
+buffer that's smaller than current one. It returns a ``mozilla::Result`` which
+contains either a usable ``mozilla::BulkWriteHandle<T>`` (where ``T`` is the
+string's ``char_type``) or an ``nsresult`` explaining why none can be had
+(presumably OOM).
+
+The actual writes are performed through the returned
+``mozilla::BulkWriteHandle<T>``. You must not access the string except via this
+handle until you call ``Finish()`` on the handle in the success case or you let
+the handle go out of scope without calling ``Finish()`` in the failure case, in
+which case the destructor of the handle puts the string in a mostly harmless but
+consistent state (containing a single REPLACEMENT CHARACTER if a capacity
+greater than 0 was requested, or in the ``char`` case if the three-byte UTF-8
+representation of the REPLACEMENT CHARACTER doesn't fit, an ASCII SUBSTITUTE).
+
+``mozilla::BulkWriteHandle<T>`` autoconverts to a writable
+``mozilla::Span<T>`` and also provides explicit access to itself as ``Span``
+(``AsSpan()``) or via component accessors named consistently with those on
+``Span``: ``Elements()`` and ``Length()``. (The latter is not the logical
+length of the string but the writable length of the buffer.) The buffer
+exposed via these methods includes the prefix that you may have requested to
+be preserved. It's up to you to skip past it so as to not overwrite it.
+
+If there's a need to request a different capacity before you are ready to
+call ``Finish()``, you can call ``RestartBulkWrite()`` on the handle. It
+takes three arguments that match the first three arguments of
+``BulkWrite()``. It returns ``mozilla::Result<mozilla::Ok, nsresult>`` to
+indicate success or OOM. Calling ``RestartBulkWrite()`` invalidates
+previously-obtained span, raw pointer or length.
+
+Once you are done writing, call ``Finish()``. It takes two arguments: the new
+logical length of the string (which must not exceed the capacity returned by
+the ``Length()`` method of the handle) and a boolean indicating whether it's
+OK to attempt to reallocate a smaller buffer in case a smaller mozjemalloc
+bucket could accommodate the new logical length.
+
+Helper Classes and Functions
+----------------------------
+
+Converting Cocoa strings
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Use ``mozilla::CopyCocoaStringToXPCOMString()`` in
+``mozilla/MacStringHelpers.h`` to convert Cocoa strings to XPCOM strings.
+
+Searching strings - looking for substrings, characters, etc.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``nsReadableUtils.h`` header provides helper methods for searching in runnables.
+
+.. code-block:: cpp
+
+ bool FindInReadable(const nsAString& pattern,
+ nsAString::const_iterator start, nsAString::const_iterator end,
+ nsStringComparator& aComparator = nsDefaultStringComparator());
+
+To use this, ``start`` and ``end`` should point to the beginning and end of a
+string that you would like to search. If the search string is found,
+``start`` and ``end`` will be adjusted to point to the beginning and end of
+the found pattern. The return value is ``true`` or ``false``, indicating
+whether or not the string was found.
+
+An example:
+
+.. code-block:: cpp
+
+ const nsAString& str = GetSomeString();
+ nsAString::const_iterator start, end;
+
+ str.BeginReading(start);
+ str.EndReading(end);
+
+ constexpr auto valuePrefix = u"value="_ns;
+
+ if (FindInReadable(valuePrefix, start, end)) {
+ // end now points to the character after the pattern
+ valueStart = end;
+ }
+
+Checking for Memory Allocation failure
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Like other types in Gecko, the string classes use infallible memory
+allocation by default, so you do not need to check for success when
+allocating/resizing "normal" strings.
+
+Most functions that modify strings (``Assign()``, ``SetLength()``, etc.) also
+have an overload that takes a ``mozilla::fallible_t`` parameter. These
+overloads return ``false`` instead of aborting if allocation fails. Use them
+when creating/allocating strings which may be very large, and which the
+program could recover from if the allocation fails.
+
+Substrings (string fragments)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is very simple to refer to a substring of an existing string without
+actually allocating new space and copying the characters into that substring.
+``Substring()`` is the preferred method to create a reference to such a
+string.
+
+.. code-block:: cpp
+
+ void ProcessString(const nsAString& str) {
+ const nsAString& firstFive = Substring(str, 0, 5); // from index 0, length 5
+ // firstFive is now a string representing the first 5 characters
+ }
+
+Unicode Conversion
+------------------
+
+Strings can be stored in two basic formats: 8-bit code unit (byte/``char``)
+strings, or 16-bit code unit (``char16_t``) strings. Any string class with a
+capital "C" in the classname contains 8-bit bytes. These classes include
+``nsCString``, ``nsDependentCString``, and so forth. Any string class without
+the "C" contains 16-bit code units.
+
+A 8-bit string can be in one of many character encodings while a 16-bit
+string is always in potentially-invalid UTF-16. (You can make a 16-bit string
+guaranteed-valid UTF-16 by passing it to ``EnsureUTF16Validity()``.) The most
+common encodings are:
+
+
+* ASCII - 7-bit encoding for basic English-only strings. Each ASCII value
+ is stored in exactly one byte in the array with the most-significant 8th bit
+ set to zero.
+
+* `UCS2 <http://www.unicode.org/glossary/#UCS_2>`_ - 16-bit encoding for a
+ subset of Unicode, `BMP <http://www.unicode.org/glossary/#BMP>`_. The Unicode
+ value of a character stored in UCS2 is stored in exactly one 16-bit
+ ``char16_t`` in a string class.
+
+* `UTF-8 <http://www.faqs.org/rfcs/rfc3629.html>`_ - 8-bit encoding for
+ Unicode characters. Each Unicode characters is stored in up to 4 bytes in a
+ string class. UTF-8 is capable of representing the entire Unicode character
+ repertoire, and it efficiently maps to `UTF-32
+ <http://www.unicode.org/glossary/#UTF_32>`_. (Gtk and Rust natively use
+ UTF-8.)
+
+* `UTF-16 <http://www.unicode.org/glossary/#UTF_16>`_ - 16-bit encoding for
+ Unicode storage, backwards compatible with UCS2. The Unicode value of a
+ character stored in UTF-16 may require one or two 16-bit ``char16_t`` in a
+ string class. The contents of ``nsAString`` always has to be regarded as in
+ this encoding instead of UCS2. UTF-16 is capable of representing the entire
+ Unicode character repertoire, and it efficiently maps to UTF-32. (Win32 W
+ APIs and Mac OS X natively use UTF-16.)
+
+* Latin1 - 8-bit encoding for the first 256 Unicode code points. Used for
+ HTTP headers and for size-optimized storage in text node and SpiderMonkey
+ strings. Latin1 converts to UTF-16 by zero-extending each byte to a 16-bit
+ code unit. Note that this kind of "Latin1" is not available for encoding
+ HTML, CSS, JS, etc. Specifying ``charset=latin1`` means the same as
+ ``charset=windows-1252``. Windows-1252 is a similar but different encoding
+ used for interchange.
+
+In addition, there exist multiple other (legacy) encodings. The Web-relevant
+ones are defined in the `Encoding Standard <https://encoding.spec.whatwg.org/>`_.
+Conversions from these encodings to
+UTF-8 and UTF-16 are provided by `mozilla::Encoding
+<https://searchfox.org/mozilla-central/source/intl/Encoding.h#109>`_.
+Additionally, on Windows the are some rare cases (e.g. drag&drop) where it's
+necessary to call a system API with data encoded in the Windows
+locale-dependent legacy encoding instead of UTF-16. In those rare cases, use
+``MultiByteToWideChar``/``WideCharToMultiByte`` from kernel32.dll. Do not use
+``iconv`` on *nix. We only support UTF-8-encoded file paths on *nix, non-path
+Gtk strings are always UTF-8 and Cocoa and Java strings are always UTF-16.
+
+When working with existing code, it is important to examine the current usage
+of the strings that you are manipulating, to determine the correct conversion
+mechanism.
+
+When writing new code, it can be confusing to know which storage class and
+encoding is the most appropriate. There is no single answer to this question,
+but the important points are:
+
+
+* **Surprisingly many strings are very often just ASCII.** ASCII is a subset of
+ UTF-8 and is, therefore, efficient to represent as UTF-8. Representing ASCII
+ as UTF-16 bad both for memory usage and cache locality.
+
+* **Rust strongly prefers UTF-8.** If your C++ code is interacting with Rust
+ code, using UTF-8 in ``nsACString`` and merely validating it when converting
+ to Rust strings is more efficient than using ``nsAString`` on the C++ side.
+
+* **Networking code prefers 8-bit strings.** Networking code tends to use 8-bit
+ strings: either with UTF-8 or Latin1 (byte value is the Unicode scalar value)
+ semantics.
+
+* **JS and DOM prefer UTF-16.** Most Gecko code uses UTF-16 for compatibility
+ with JS strings and DOM string which are potentially-invalid UTF-16. However,
+ both DOM text nodes and JS strings store strings that only contain code points
+ below U+0100 as Latin1 (byte value is the Unicode scalar value).
+
+* **Windows and Cocoa use UTF-16.** Windows system APIs take UTF-16. Cocoa
+ ``NSString`` is UTF-16.
+
+* **Gtk uses UTF-8.** Gtk APIs take UTF-8 for non-file paths. In the Gecko
+ case, we support only UTF-8 file paths outside Windows, so all Gtk strings
+ are UTF-8 for our purposes though file paths received from Gtk may not be
+ valid UTF-8.
+
+To assist with ASCII, Latin1, UTF-8, and UTF-16 conversions, there are some
+helper methods and classes. Some of these classes look like functions,
+because they are most often used as temporary objects on the stack.
+
+Short zero-terminated ASCII strings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you have a short zero-terminated string that you are certain is always
+ASCII, use these special-case methods instead of the conversions described in
+the later sections.
+
+* If you are assigning an ASCII literal to an ``nsACString``, use
+ ``AssignLiteral()``.
+* If you are assigning a literal to an ``nsAString``, use ``AssignLiteral()``
+ and make the literal a ``u""`` literal. If the literal has to be a ``""``
+ literal (as opposed to ``u""``) and is ASCII, still use ``AppendLiteral()``,
+ but be aware that this involves a run-time inflation.
+* If you are assigning a zero-terminated ASCII string that's not a literal from
+ the compiler's point of view at the call site and you don't know the length
+ of the string either (e.g. because it was looked up from an array of literals
+ of varying lengths), use ``AssignASCII()``.
+
+UTF-8 / UTF-16 conversion
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. cpp:function:: NS_ConvertUTF8toUTF16(const nsACString&)
+
+ a ``nsAutoString`` subclass that converts a UTF-8 encoded ``nsACString``
+ or ``const char*`` to a 16-bit UTF-16 string. If you need a ``const
+ char16_t*`` buffer, you can use the ``.get()`` method. For example:
+
+ .. code-block:: cpp
+
+ /* signature: void HandleUnicodeString(const nsAString& str); */
+ object->HandleUnicodeString(NS_ConvertUTF8toUTF16(utf8String));
+
+ /* signature: void HandleUnicodeBuffer(const char16_t* str); */
+ object->HandleUnicodeBuffer(NS_ConvertUTF8toUTF16(utf8String).get());
+
+.. cpp:function:: NS_ConvertUTF16toUTF8(const nsAString&)
+
+ a ``nsAutoCString`` which converts a 16-bit UTF-16 string (``nsAString``)
+ to a UTF-8 encoded string. As above, you can use ``.get()`` to access a
+ ``const char*`` buffer.
+
+ .. code-block:: cpp
+
+ /* signature: void HandleUTF8String(const nsACString& str); */
+ object->HandleUTF8String(NS_ConvertUTF16toUTF8(utf16String));
+
+ /* signature: void HandleUTF8Buffer(const char* str); */
+ object->HandleUTF8Buffer(NS_ConvertUTF16toUTF8(utf16String).get());
+
+.. cpp:function:: CopyUTF8toUTF16(const nsACString&, nsAString&)
+
+ converts and copies:
+
+ .. code-block:: cpp
+
+ // return a UTF-16 value
+ void Foo::GetUnicodeValue(nsAString& result) {
+ CopyUTF8toUTF16(mLocalUTF8Value, result);
+ }
+
+.. cpp:function:: AppendUTF8toUTF16(const nsACString&, nsAString&)
+
+ converts and appends:
+
+ .. code-block:: cpp
+
+ // return a UTF-16 value
+ void Foo::GetUnicodeValue(nsAString& result) {
+ result.AssignLiteral("prefix:");
+ AppendUTF8toUTF16(mLocalUTF8Value, result);
+ }
+
+.. cpp:function:: CopyUTF16toUTF8(const nsAString&, nsACString&)
+
+ converts and copies:
+
+ .. code-block:: cpp
+
+ // return a UTF-8 value
+ void Foo::GetUTF8Value(nsACString& result) {
+ CopyUTF16toUTF8(mLocalUTF16Value, result);
+ }
+
+.. cpp:function:: AppendUTF16toUTF8(const nsAString&, nsACString&)
+
+ converts and appends:
+
+ .. code-block:: cpp
+
+ // return a UTF-8 value
+ void Foo::GetUnicodeValue(nsACString& result) {
+ result.AssignLiteral("prefix:");
+ AppendUTF16toUTF8(mLocalUTF16Value, result);
+ }
+
+
+Latin1 / UTF-16 Conversion
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following should only be used when you can guarantee that the original
+string is ASCII or Latin1 (in the sense that the byte value is the Unicode
+scalar value; not in the windows-1252 sense). These helpers are very similar
+to the UTF-8 / UTF-16 conversion helpers above.
+
+
+UTF-16 to Latin1 converters
+```````````````````````````
+
+These converters are **very dangerous** because they **lose information**
+during the conversion process. You should **avoid UTF-16 to Latin1
+conversions** unless your strings are guaranteed to be Latin1 or ASCII. (In
+the future, these conversions may start asserting in debug builds that their
+input is in the permissible range.) If the input is actually in the Latin1
+range, each 16-bit code unit in narrowed to an 8-bit byte by removing the
+high half. Unicode code points above U+00FF result in garbage whose nature
+must not be relied upon. (In the future the nature of the garbage will be CPU
+architecture-dependent.) If you want to ``printf()`` something and don't care
+what happens to non-ASCII, please convert to UTF-8 instead.
+
+
+.. cpp:function:: NS_LossyConvertUTF16toASCII(const nsAString&)
+
+ A ``nsAutoCString`` which holds a temporary buffer containing the Latin1
+ value of the string.
+
+.. cpp:function:: void LossyCopyUTF16toASCII(Span<const char16_t>, nsACString&)
+
+ Does an in-place conversion from UTF-16 into an Latin1 string object.
+
+.. cpp:function:: void LossyAppendUTF16toASCII(Span<const char16_t>, nsACString&)
+
+ Appends a UTF-16 string to a Latin1 string.
+
+Latin1 to UTF-16 converters
+```````````````````````````
+
+These converters are very dangerous because they will **produce wrong results
+for non-ASCII UTF-8 or windows-1252 input** into a meaningless UTF-16 string.
+You should **avoid ASCII to UTF-16 conversions** unless your strings are
+guaranteed to be ASCII or Latin1 in the sense of the byte value being the
+Unicode scalar value. Every byte is zero-extended into a 16-bit code unit.
+
+It is correct to use these on most HTTP header values, but **it's always
+wrong to use these on HTTP response bodies!** (Use ``mozilla::Encoding`` to
+deal with response bodies.)
+
+.. cpp:function:: NS_ConvertASCIItoUTF16(const nsACString&)
+
+ A ``nsAutoString`` which holds a temporary buffer containing the value of
+ the Latin1 to UTF-16 conversion.
+
+.. cpp:function:: void CopyASCIItoUTF16(Span<const char>, nsAString&)
+
+ does an in-place conversion from Latin1 to UTF-16.
+
+.. cpp:function:: void AppendASCIItoUTF16(Span<const char>, nsAString&)
+
+ appends a Latin1 string to a UTF-16 string.
+
+Comparing ns*Strings with C strings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You can compare ``ns*Strings`` with C strings by converting the ``ns*String``
+to a C string, or by comparing directly against a C String.
+
+.. cpp:function:: bool nsAString::EqualsASCII(const char*)
+
+ Compares with an ASCII C string.
+
+.. cpp:function:: bool nsAString::EqualsLiteral(...)
+
+ Compares with a string literal.
+
+Common Patterns
+---------------
+
+Literal Strings
+~~~~~~~~~~~~~~~
+
+A literal string is a raw string value that is written in some C++ code. For
+example, in the statement ``printf("Hello World\n");`` the value ``"Hello
+World\n"`` is a literal string. It is often necessary to insert literal
+string values when an ``nsAString`` or ``nsACString`` is required. Two
+user-defined literals are provided that implicitly convert to ``const
+nsString&`` resp. ``const nsCString&``:
+
+* ``""_ns`` for 8-bit literals, converting implicitly to ``const nsCString&``
+* ``u""_ns`` for 16-bit literals, converting implicitly to ``const nsString&``
+
+The benefits of the user-defined literals may seem unclear, given that
+``nsDependentCString`` will also wrap a string value in an ``nsCString``. The
+advantage of the user-defined literals is twofold.
+
+* The length of these strings is calculated at compile time, so the string does
+ not need to be scanned at runtime to determine its length.
+
+* Literal strings live for the lifetime of the binary, and can be moved between
+ the ``ns[C]String`` classes without being copied or freed.
+
+Here are some examples of proper usage of the literals (both standard and
+user-defined):
+
+.. code-block:: cpp
+
+ // call Init(const nsLiteralString&) - enforces that it's only called with literals
+ Init(u"start value"_ns);
+
+ // call Init(const nsAString&)
+ Init(u"start value"_ns);
+
+ // call Init(const nsACString&)
+ Init("start value"_ns);
+
+In case a literal is defined via a macro, you can just convert it to
+``nsLiteralString`` or ``nsLiteralCString`` using their constructor. You
+could consider not using a macro at all but a named ``constexpr`` constant
+instead.
+
+In some cases, an 8-bit literal is defined via a macro, either within code or
+from the environment, but it can't be changed or is used both as an 8-bit and
+a 16-bit string. In these cases, you can use the
+``NS_LITERAL_STRING_FROM_CSTRING`` macro to construct a ``nsLiteralString``
+and do the conversion at compile-time.
+
+String Concatenation
+~~~~~~~~~~~~~~~~~~~~
+
+Strings can be concatenated together using the + operator. The resulting
+string is a ``const nsSubstringTuple`` object. The resulting object can be
+treated and referenced similarly to a ``nsAString`` object. Concatenation *does
+not copy the substrings*. The strings are only copied when the concatenation
+is assigned into another string object. The ``nsSubstringTuple`` object holds
+pointers to the original strings. Therefore, the ``nsSubstringTuple`` object is
+dependent on all of its substrings, meaning that their lifetime must be at
+least as long as the ``nsSubstringTuple`` object.
+
+For example, you can use the value of two strings and pass their
+concatenation on to another function which takes an ``const nsAString&``:
+
+.. code-block:: cpp
+
+ void HandleTwoStrings(const nsAString& one, const nsAString& two) {
+ // call HandleString(const nsAString&)
+ HandleString(one + two);
+ }
+
+NOTE: The two strings are implicitly combined into a temporary ``nsString``
+in this case, and the temporary string is passed into ``HandleString``. If
+``HandleString`` assigns its input into another ``nsString``, then the string
+buffer will be shared in this case negating the cost of the intermediate
+temporary. You can concatenate N strings and store the result in a temporary
+variable:
+
+.. code-block:: cpp
+
+ constexpr auto start = u"start "_ns;
+ constexpr auto middle = u"middle "_ns;
+ constexpr auto end = u"end"_ns;
+ // create a string with 3 dependent fragments - no copying involved!
+ nsString combinedString = start + middle + end;
+
+ // call void HandleString(const nsAString&);
+ HandleString(combinedString);
+
+It is safe to concatenate user-defined literals because the temporary
+``nsLiteral[C]String`` objects will live as long as the temporary
+concatenation object (of type ``nsSubstringTuple``).
+
+.. code-block:: cpp
+
+ // call HandlePage(const nsAString&);
+ // safe because the concatenated-string will live as long as its substrings
+ HandlePage(u"start "_ns + u"end"_ns);
+
+Local Variables
+~~~~~~~~~~~~~~~
+
+Local variables within a function are usually stored on the stack. The
+``nsAutoString``/``nsAutoCString`` classes are subclasses of the
+``nsString``/``nsCString`` classes. They own a 64-character buffer allocated
+in the same storage space as the string itself. If the ``nsAutoString`` is
+allocated on the stack, then it has at its disposal a 64-character stack
+buffer. This allows the implementation to avoid allocating extra memory when
+dealing with small strings. ``nsAutoStringN``/``nsAutoCStringN`` are more
+general alternatives that let you choose the number of characters in the
+inline buffer.
+
+.. code-block:: cpp
+
+ ...
+ nsAutoString value;
+ GetValue(value); // if the result is less than 64 code units,
+ // then this just saved us an allocation
+ ...
+
+Member Variables
+~~~~~~~~~~~~~~~~
+
+In general, you should use the concrete classes ``nsString`` and
+``nsCString`` for member variables.
+
+.. code-block:: cpp
+
+ class Foo {
+ ...
+ // these store UTF-8 and UTF-16 values respectively
+ nsCString mLocalName;
+ nsString mTitle;
+ };
+
+A common incorrect pattern is to use ``nsAutoString``/``nsAutoCString``
+for member variables. As described in `Local Variables`_, these classes have
+a built in buffer that make them very large. This means that if you include
+them in a class, they bloat the class by 64 bytes (``nsAutoCString``) or 128
+bytes (``nsAutoString``).
+
+
+Raw Character Pointers
+~~~~~~~~~~~~~~~~~~~~~~
+
+``PromiseFlatString()`` and ``PromiseFlatCString()`` can be used to create a
+temporary buffer which holds a null-terminated buffer containing the same
+value as the source string. ``PromiseFlatString()`` will create a temporary
+buffer if necessary. This is most often used in order to pass an
+``nsAString`` to an API which requires a null-terminated string.
+
+In the following example, an ``nsAString`` is combined with a literal string,
+and the result is passed to an API which requires a simple character buffer.
+
+.. code-block:: cpp
+
+ // Modify the URL and pass to AddPage(const char16_t* url)
+ void AddModifiedPage(const nsAString& url) {
+ constexpr auto httpPrefix = u"http://"_ns;
+ const nsAString& modifiedURL = httpPrefix + url;
+
+ // creates a temporary buffer
+ AddPage(PromiseFlatString(modifiedURL).get());
+ }
+
+``PromiseFlatString()`` is smart when handed a string that is already
+null-terminated. It avoids creating the temporary buffer in such cases.
+
+.. code-block:: cpp
+
+ // Modify the URL and pass to AddPage(const char16_t* url)
+ void AddModifiedPage(const nsAString& url, PRBool addPrefix) {
+ if (addPrefix) {
+ // MUST create a temporary buffer - string is multi-fragmented
+ constexpr auto httpPrefix = u"http://"_ns;
+ AddPage(PromiseFlatString(httpPrefix + modifiedURL));
+ } else {
+ // MIGHT create a temporary buffer, does a runtime check
+ AddPage(PromiseFlatString(url).get());
+ }
+ }
+
+.. note::
+
+ It is **not** possible to efficiently transfer ownership of a string
+ class' internal buffer into an owned ``char*`` which can be safely
+ freed by other components due to the COW optimization.
+
+ If working with a legacy API which requires malloced ``char*`` buffers,
+ prefer using ``ToNewUnicode``, ``ToNewCString`` or ``ToNewUTF8String``
+ over ``strdup`` to create owned ``char*`` pointers.
+
+``printf`` and a UTF-16 string
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For debugging, it's useful to ``printf`` a UTF-16 string (``nsString``,
+``nsAutoString``, etc). To do this usually requires converting it to an 8-bit
+string, because that's what ``printf`` expects. Use:
+
+.. code-block:: cpp
+
+ printf("%s\n", NS_ConvertUTF16toUTF8(yourString).get());
+
+Sequence of appends without reallocating
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``SetCapacity()`` allows you to give the string a hint of the future string
+length caused by a sequence of appends (excluding appends that convert
+between UTF-16 and UTF-8 in either direction) in order to avoid multiple
+allocations during the sequence of appends. However, the other
+allocation-avoidance features of XPCOM strings interact badly with
+``SetCapacity()`` making it something of a footgun.
+
+``SetCapacity()`` is appropriate to use before a sequence of multiple
+operations from the following list (without operations that are not on the
+list between the ``SetCapacity()`` call and operations from the list):
+
+* ``Append()``
+* ``AppendASCII()``
+* ``AppendLiteral()``
+* ``AppendPrintf()``
+* ``AppendInt()``
+* ``AppendFloat()``
+* ``LossyAppendUTF16toASCII()``
+* ``AppendASCIItoUTF16()``
+
+**DO NOT** call ``SetCapacity()`` if the subsequent operations on the string
+do not meet the criteria above. Operations that undo the benefits of
+``SetCapacity()`` include but are not limited to:
+
+* ``SetLength()``
+* ``Truncate()``
+* ``Assign()``
+* ``AssignLiteral()``
+* ``Adopt()``
+* ``CopyASCIItoUTF16()``
+* ``LossyCopyUTF16toASCII()``
+* ``AppendUTF16toUTF8()``
+* ``AppendUTF8toUTF16()``
+* ``CopyUTF16toUTF8()``
+* ``CopyUTF8toUTF16()``
+
+If your string is an ``nsAuto[C]String`` and you are calling
+``SetCapacity()`` with a constant ``N``, please instead declare the string as
+``nsAuto[C]StringN<N+1>`` without calling ``SetCapacity()`` (while being
+mindful of not using such a large ``N`` as to overflow the run-time stack).
+
+There is no need to include room for the null terminator: it is the job of
+the string class.
+
+Note: Calling ``SetCapacity()`` does not give you permission to use the
+pointer obtained from ``BeginWriting()`` to write past the current length (as
+returned by ``Length()``) of the string. Please use either ``BulkWrite()`` or
+``SetLength()`` instead.
+
+.. _stringguide.xpidl:
+
+XPIDL
+-----
+
+The string library is also available through IDL. By declaring attributes and
+methods using the specially defined IDL types, string classes are used as
+parameters to the corresponding methods.
+
+XPIDL String types
+~~~~~~~~~~~~~~~~~~
+
+The C++ signatures follow the abstract-type convention described above, such
+that all method parameters are based on the abstract classes. The following
+table describes the purpose of each string type in IDL.
+
++-----------------+----------------+----------------------------------------------------------------------------------+
+| XPIDL Type | C++ Type | Purpose |
++=================+================+==================================================================================+
+| ``string`` | ``char*`` | Raw character pointer to ASCII (7-bit) string, no string classes used. |
+| | | |
+| | | High bit is not guaranteed across XPConnect boundaries. |
++-----------------+----------------+----------------------------------------------------------------------------------+
+| ``wstring`` | ``char16_t*`` | Raw character pointer to UTF-16 string, no string classes used. |
++-----------------+----------------+----------------------------------------------------------------------------------+
+| ``AString`` | ``nsAString`` | UTF-16 string. |
++-----------------+----------------+----------------------------------------------------------------------------------+
+| ``ACString`` | ``nsACString`` | 8-bit string. All bits are preserved across XPConnect boundaries. |
++-----------------+----------------+----------------------------------------------------------------------------------+
+| ``AUTF8String`` | ``nsACString`` | UTF-8 string. |
+| | | |
+| | | Converted to UTF-16 as necessary when value is used across XPConnect boundaries. |
++-----------------+----------------+----------------------------------------------------------------------------------+
+
+Callers should prefer using the string classes ``AString``, ``ACString`` and
+``AUTF8String`` over the raw pointer types ``string`` and ``wstring`` in
+almost all situations.
+
+C++ Signatures
+~~~~~~~~~~~~~~
+
+In XPIDL, ``in`` parameters are read-only, and the C++ signatures for
+``*String`` parameters follows the above guidelines by using ``const
+nsAString&`` for these parameters. ``out`` and ``inout`` parameters are
+defined simply as ``nsAString&`` so that the callee can write to them.
+
+.. code-block:: cpp
+
+ interface nsIFoo : nsISupports {
+ attribute AString utf16String;
+ AUTF8String getValue(in ACString key);
+ };
+
+.. code-block:: cpp
+
+ class nsIFoo : public nsISupports {
+ NS_IMETHOD GetUtf16String(nsAString& aResult) = 0;
+ NS_IMETHOD SetUtf16String(const nsAString& aValue) = 0;
+ NS_IMETHOD GetValue(const nsACString& aKey, nsACString& aResult) = 0;
+ };
+
+In the above example, ``utf16String`` is treated as a UTF-16 string. The
+implementation of ``GetUtf16String()`` will use ``aResult.Assign`` to
+"return" the value. In ``SetUtf16String()`` the value of the string can be
+used through a variety of methods including `Iterators`_,
+``PromiseFlatString``, and assignment to other strings.
+
+In ``GetValue()``, the first parameter, ``aKey``, is treated as a raw
+sequence of 8-bit values. Any non-ASCII characters in ``aKey`` will be
+preserved when crossing XPConnect boundaries. The implementation of
+``GetValue()`` will assign a UTF-8 encoded 8-bit string into ``aResult``. If
+the this method is called across XPConnect boundaries, such as from a script,
+then the result will be decoded from UTF-8 into UTF-16 and used as a Unicode
+value.
+
+String Guidelines
+-----------------
+
+Follow these simple rules in your code to keep your fellow developers,
+reviewers, and users happy.
+
+* Use the most abstract string class that you can. Usually this is:
+ * ``nsAString`` for function parameters
+ * ``nsString`` for member variables
+ * ``nsAutoString`` for local (stack-based) variables
+* Use the ``""_ns`` and ``u""_ns`` user-defined literals to represent literal strings (e.g. ``"foo"_ns``) as nsAString-compatible objects.
+* Use string concatenation (i.e. the "+" operator) when combining strings.
+* Use ``nsDependentString`` when you have a raw character pointer that you need to convert to an nsAString-compatible string.
+* Use ``Substring()`` to extract fragments of existing strings.
+* Use `iterators`_ to parse and extract string fragments.
+
+Class Reference
+---------------
+
+.. cpp:class:: template<T> nsTSubstring<T>
+
+ .. note::
+
+ The ``nsTSubstring<char_type>`` class is usually written as
+ ``nsAString`` or ``nsACString``.
+
+ .. cpp:function:: size_type Length() const
+
+ .. cpp:function:: bool IsEmpty() const
+
+ .. cpp:function:: bool IsVoid() const
+
+ .. cpp:function:: const char_type* BeginReading() const
+
+ .. cpp:function:: const char_type* EndReading() const
+
+ .. cpp:function:: bool Equals(const self_type&, comparator_type = ...) const
+
+ .. cpp:function:: char_type First() const
+
+ .. cpp:function:: char_type Last() const
+
+ .. cpp:function:: size_type CountChar(char_type) const
+
+ .. cpp:function:: int32_t FindChar(char_type, index_type aOffset = 0) const
+
+ .. cpp:function:: void Assign(const self_type&)
+
+ .. cpp:function:: void Append(const self_type&)
+
+ .. cpp:function:: void Insert(const self_type&, index_type aPos)
+
+ .. cpp:function:: void Cut(index_type aCutStart, size_type aCutLength)
+
+ .. cpp:function:: void Replace(index_type aCutStart, size_type aCutLength, const self_type& aStr)
+
+ .. cpp:function:: void Truncate(size_type aLength)
+
+ .. cpp:function:: void SetIsVoid(bool)
+
+ Make it null. XPConnect and WebIDL will convert void nsAStrings to
+ JavaScript ``null``.
+
+ .. cpp:function:: char_type* BeginWriting()
+
+ .. cpp:function:: char_type* EndWriting()
+
+ .. cpp:function:: void SetCapacity(size_type)
+
+ Inform the string about buffer size need before a sequence of calls
+ to ``Append()`` or converting appends that convert between UTF-16 and
+ Latin1 in either direction. (Don't use if you use appends that
+ convert between UTF-16 and UTF-8 in either direction.) Calling this
+ method does not give you permission to use ``BeginWriting()`` to
+ write past the logical length of the string. Use ``SetLength()`` or
+ ``BulkWrite()`` as appropriate.
+
+ .. cpp:function:: void SetLength(size_type)
+
+ .. cpp:function:: Result<BulkWriteHandle<char_type>, nsresult> BulkWrite(size_type aCapacity, size_type aPrefixToPreserve, bool aAllowShrinking)