From 26a029d407be480d791972afb5975cf62c9360a6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 02:47:55 +0200 Subject: Adding upstream version 124.0.1. Signed-off-by: Daniel Baumann --- media/libopus/include/opus_defines.h | 801 +++++++++++++++++++++++++++++++++++ 1 file changed, 801 insertions(+) create mode 100644 media/libopus/include/opus_defines.h (limited to 'media/libopus/include/opus_defines.h') diff --git a/media/libopus/include/opus_defines.h b/media/libopus/include/opus_defines.h new file mode 100644 index 0000000000..94b9e0d9fc --- /dev/null +++ b/media/libopus/include/opus_defines.h @@ -0,0 +1,801 @@ +/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited + Written by Jean-Marc Valin and Koen Vos */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_defines.h + * @brief Opus reference implementation constants + */ + +#ifndef OPUS_DEFINES_H +#define OPUS_DEFINES_H + +#include "opus_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup opus_errorcodes Error codes + * @{ + */ +/** No error @hideinitializer*/ +#define OPUS_OK 0 +/** One or more invalid/out of range arguments @hideinitializer*/ +#define OPUS_BAD_ARG -1 +/** Not enough bytes allocated in the buffer @hideinitializer*/ +#define OPUS_BUFFER_TOO_SMALL -2 +/** An internal error was detected @hideinitializer*/ +#define OPUS_INTERNAL_ERROR -3 +/** The compressed data passed is corrupted @hideinitializer*/ +#define OPUS_INVALID_PACKET -4 +/** Invalid/unsupported request number @hideinitializer*/ +#define OPUS_UNIMPLEMENTED -5 +/** An encoder or decoder structure is invalid or already freed @hideinitializer*/ +#define OPUS_INVALID_STATE -6 +/** Memory allocation has failed @hideinitializer*/ +#define OPUS_ALLOC_FAIL -7 +/**@}*/ + +/** @cond OPUS_INTERNAL_DOC */ +/**Export control for opus functions */ + +#ifndef OPUS_EXPORT +# if defined(_WIN32) +# if defined(OPUS_BUILD) && defined(DLL_EXPORT) +# define OPUS_EXPORT __declspec(dllexport) +# else +# define OPUS_EXPORT +# endif +# elif defined(__GNUC__) && defined(OPUS_BUILD) +# define OPUS_EXPORT __attribute__ ((visibility ("default"))) +# else +# define OPUS_EXPORT +# endif +#endif + +# if !defined(OPUS_GNUC_PREREQ) +# if defined(__GNUC__)&&defined(__GNUC_MINOR__) +# define OPUS_GNUC_PREREQ(_maj,_min) \ + ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min)) +# else +# define OPUS_GNUC_PREREQ(_maj,_min) 0 +# endif +# endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(3,0) +# define OPUS_RESTRICT __restrict__ +# elif (defined(_MSC_VER) && _MSC_VER >= 1400) +# define OPUS_RESTRICT __restrict +# else +# define OPUS_RESTRICT +# endif +#else +# define OPUS_RESTRICT restrict +#endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(2,7) +# define OPUS_INLINE __inline__ +# elif (defined(_MSC_VER)) +# define OPUS_INLINE __inline +# else +# define OPUS_INLINE +# endif +#else +# define OPUS_INLINE inline +#endif + +/**Warning attributes for opus functions + * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out + * some paranoid null checks. */ +#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__)) +#else +# define OPUS_WARN_UNUSED_RESULT +#endif +#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_ARG_NONNULL(_x) __attribute__ ((__nonnull__(_x))) +#else +# define OPUS_ARG_NONNULL(_x) +#endif + +/** These are the actual Encoder CTL ID numbers. + * They should not be used directly by applications. + * In general, SETs should be even and GETs should be odd.*/ +#define OPUS_SET_APPLICATION_REQUEST 4000 +#define OPUS_GET_APPLICATION_REQUEST 4001 +#define OPUS_SET_BITRATE_REQUEST 4002 +#define OPUS_GET_BITRATE_REQUEST 4003 +#define OPUS_SET_MAX_BANDWIDTH_REQUEST 4004 +#define OPUS_GET_MAX_BANDWIDTH_REQUEST 4005 +#define OPUS_SET_VBR_REQUEST 4006 +#define OPUS_GET_VBR_REQUEST 4007 +#define OPUS_SET_BANDWIDTH_REQUEST 4008 +#define OPUS_GET_BANDWIDTH_REQUEST 4009 +#define OPUS_SET_COMPLEXITY_REQUEST 4010 +#define OPUS_GET_COMPLEXITY_REQUEST 4011 +#define OPUS_SET_INBAND_FEC_REQUEST 4012 +#define OPUS_GET_INBAND_FEC_REQUEST 4013 +#define OPUS_SET_PACKET_LOSS_PERC_REQUEST 4014 +#define OPUS_GET_PACKET_LOSS_PERC_REQUEST 4015 +#define OPUS_SET_DTX_REQUEST 4016 +#define OPUS_GET_DTX_REQUEST 4017 +#define OPUS_SET_VBR_CONSTRAINT_REQUEST 4020 +#define OPUS_GET_VBR_CONSTRAINT_REQUEST 4021 +#define OPUS_SET_FORCE_CHANNELS_REQUEST 4022 +#define OPUS_GET_FORCE_CHANNELS_REQUEST 4023 +#define OPUS_SET_SIGNAL_REQUEST 4024 +#define OPUS_GET_SIGNAL_REQUEST 4025 +#define OPUS_GET_LOOKAHEAD_REQUEST 4027 +/* #define OPUS_RESET_STATE 4028 */ +#define OPUS_GET_SAMPLE_RATE_REQUEST 4029 +#define OPUS_GET_FINAL_RANGE_REQUEST 4031 +#define OPUS_GET_PITCH_REQUEST 4033 +#define OPUS_SET_GAIN_REQUEST 4034 +#define OPUS_GET_GAIN_REQUEST 4045 /* Should have been 4035 */ +#define OPUS_SET_LSB_DEPTH_REQUEST 4036 +#define OPUS_GET_LSB_DEPTH_REQUEST 4037 +#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039 +#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040 +#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041 +#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042 +#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043 +/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */ +#define OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST 4046 +#define OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST 4047 +#define OPUS_GET_IN_DTX_REQUEST 4049 + +/** Defines for the presence of extended APIs. */ +#define OPUS_HAVE_OPUS_PROJECTION_H + +/* Macros to trigger compilation errors when the wrong types are provided to a CTL */ +#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x)) +#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr))) +#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr))) +#define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr))) +/** @endcond */ + +/** @defgroup opus_ctlvalues Pre-defined values for CTL interface + * @see opus_genericctls, opus_encoderctls + * @{ + */ +/* Values for the various encoder CTLs */ +#define OPUS_AUTO -1000 /**opus_int32: Allowed values: 0-10, inclusive. + * + * @hideinitializer */ +#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x) +/** Gets the encoder's complexity configuration. + * @see OPUS_SET_COMPLEXITY + * @param[out] x opus_int32 *: Returns a value in the range 0-10, + * inclusive. + * @hideinitializer */ +#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x) + +/** Configures the bitrate in the encoder. + * Rates from 500 to 512000 bits per second are meaningful, as well as the + * special values #OPUS_AUTO and #OPUS_BITRATE_MAX. + * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much + * rate as it can, which is useful for controlling the rate by adjusting the + * output buffer size. + * @see OPUS_GET_BITRATE + * @param[in] x opus_int32: Bitrate in bits per second. The default + * is determined based on the number of + * channels and the input sampling rate. + * @hideinitializer */ +#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x) +/** Gets the encoder's bitrate configuration. + * @see OPUS_SET_BITRATE + * @param[out] x opus_int32 *: Returns the bitrate in bits per second. + * The default is determined based on the + * number of channels and the input + * sampling rate. + * @hideinitializer */ +#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables variable bitrate (VBR) in the encoder. + * The configured bitrate may not be met exactly because frames must + * be an integer number of bytes in length. + * @see OPUS_GET_VBR + * @see OPUS_SET_VBR_CONSTRAINT + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Hard CBR. For LPC/hybrid modes at very low bit-rate, this can + * cause noticeable quality degradation.
+ *
1
VBR (default). The exact type of VBR is controlled by + * #OPUS_SET_VBR_CONSTRAINT.
+ *
+ * @hideinitializer */ +#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x) +/** Determine if variable bitrate (VBR) is enabled in the encoder. + * @see OPUS_SET_VBR + * @see OPUS_GET_VBR_CONSTRAINT + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
Hard CBR.
+ *
1
VBR (default). The exact type of VBR may be retrieved via + * #OPUS_GET_VBR_CONSTRAINT.
+ *
+ * @hideinitializer */ +#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables constrained VBR in the encoder. + * This setting is ignored when the encoder is in CBR mode. + * @warning Only the MDCT mode of Opus currently heeds the constraint. + * Speech mode ignores it completely, hybrid mode may fail to obey it + * if the LPC layer uses more bitrate than the constraint would have + * permitted. + * @see OPUS_GET_VBR_CONSTRAINT + * @see OPUS_SET_VBR + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Unconstrained VBR.
+ *
1
Constrained VBR (default). This creates a maximum of one + * frame of buffering delay assuming a transport with a + * serialization speed of the nominal bitrate.
+ *
+ * @hideinitializer */ +#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x) +/** Determine if constrained VBR is enabled in the encoder. + * @see OPUS_SET_VBR_CONSTRAINT + * @see OPUS_GET_VBR + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
Unconstrained VBR.
+ *
1
Constrained VBR (default).
+ *
+ * @hideinitializer */ +#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x) + +/** Configures mono/stereo forcing in the encoder. + * This can force the encoder to produce packets encoded as either mono or + * stereo, regardless of the format of the input audio. This is useful when + * the caller knows that the input signal is currently a mono source embedded + * in a stereo stream. + * @see OPUS_GET_FORCE_CHANNELS + * @param[in] x opus_int32: Allowed values: + *
+ *
#OPUS_AUTO
Not forced (default)
+ *
1
Forced mono
+ *
2
Forced stereo
+ *
+ * @hideinitializer */ +#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x) +/** Gets the encoder's forced channel configuration. + * @see OPUS_SET_FORCE_CHANNELS + * @param[out] x opus_int32 *: + *
+ *
#OPUS_AUTO
Not forced (default)
+ *
1
Forced mono
+ *
2
Forced stereo
+ *
+ * @hideinitializer */ +#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x) + +/** Configures the maximum bandpass that the encoder will select automatically. + * Applications should normally use this instead of #OPUS_SET_BANDWIDTH + * (leaving that set to the default, #OPUS_AUTO). This allows the + * application to set an upper bound based on the type of input it is + * providing, but still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_MAX_BANDWIDTH + * @param[in] x opus_int32: Allowed values: + *
+ *
OPUS_BANDWIDTH_NARROWBAND
4 kHz passband
+ *
OPUS_BANDWIDTH_MEDIUMBAND
6 kHz passband
+ *
OPUS_BANDWIDTH_WIDEBAND
8 kHz passband
+ *
OPUS_BANDWIDTH_SUPERWIDEBAND
12 kHz passband
+ *
OPUS_BANDWIDTH_FULLBAND
20 kHz passband (default)
+ *
+ * @hideinitializer */ +#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Gets the encoder's configured maximum allowed bandpass. + * @see OPUS_SET_MAX_BANDWIDTH + * @param[out] x opus_int32 *: Allowed values: + *
+ *
#OPUS_BANDWIDTH_NARROWBAND
4 kHz passband
+ *
#OPUS_BANDWIDTH_MEDIUMBAND
6 kHz passband
+ *
#OPUS_BANDWIDTH_WIDEBAND
8 kHz passband
+ *
#OPUS_BANDWIDTH_SUPERWIDEBAND
12 kHz passband
+ *
#OPUS_BANDWIDTH_FULLBAND
20 kHz passband (default)
+ *
+ * @hideinitializer */ +#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/** Sets the encoder's bandpass to a specific value. + * This prevents the encoder from automatically selecting the bandpass based + * on the available bitrate. If an application knows the bandpass of the input + * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH + * instead, which still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_BANDWIDTH + * @param[in] x opus_int32: Allowed values: + *
+ *
#OPUS_AUTO
(default)
+ *
#OPUS_BANDWIDTH_NARROWBAND
4 kHz passband
+ *
#OPUS_BANDWIDTH_MEDIUMBAND
6 kHz passband
+ *
#OPUS_BANDWIDTH_WIDEBAND
8 kHz passband
+ *
#OPUS_BANDWIDTH_SUPERWIDEBAND
12 kHz passband
+ *
#OPUS_BANDWIDTH_FULLBAND
20 kHz passband
+ *
+ * @hideinitializer */ +#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Configures the type of signal being encoded. + * This is a hint which helps the encoder's mode selection. + * @see OPUS_GET_SIGNAL + * @param[in] x opus_int32: Allowed values: + *
+ *
#OPUS_AUTO
(default)
+ *
#OPUS_SIGNAL_VOICE
Bias thresholds towards choosing LPC or Hybrid modes.
+ *
#OPUS_SIGNAL_MUSIC
Bias thresholds towards choosing MDCT modes.
+ *
+ * @hideinitializer */ +#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal type. + * @see OPUS_SET_SIGNAL + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
#OPUS_AUTO
(default)
+ *
#OPUS_SIGNAL_VOICE
Bias thresholds towards choosing LPC or Hybrid modes.
+ *
#OPUS_SIGNAL_MUSIC
Bias thresholds towards choosing MDCT modes.
+ *
+ * @hideinitializer */ +#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x) + + +/** Configures the encoder's intended application. + * The initial value is a mandatory argument to the encoder_create function. + * @see OPUS_GET_APPLICATION + * @param[in] x opus_int32: Returns one of the following values: + *
+ *
#OPUS_APPLICATION_VOIP
+ *
Process signal for improved speech intelligibility.
+ *
#OPUS_APPLICATION_AUDIO
+ *
Favor faithfulness to the original input.
+ *
#OPUS_APPLICATION_RESTRICTED_LOWDELAY
+ *
Configure the minimum possible coding delay by disabling certain modes + * of operation.
+ *
+ * @hideinitializer */ +#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured application. + * @see OPUS_SET_APPLICATION + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
#OPUS_APPLICATION_VOIP
+ *
Process signal for improved speech intelligibility.
+ *
#OPUS_APPLICATION_AUDIO
+ *
Favor faithfulness to the original input.
+ *
#OPUS_APPLICATION_RESTRICTED_LOWDELAY
+ *
Configure the minimum possible coding delay by disabling certain modes + * of operation.
+ *
+ * @hideinitializer */ +#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x) + +/** Gets the total samples of delay added by the entire codec. + * This can be queried by the encoder and then the provided number of samples can be + * skipped on from the start of the decoder's output to provide time aligned input + * and output. From the perspective of a decoding application the real data begins this many + * samples late. + * + * The decoder contribution to this delay is identical for all decoders, but the + * encoder portion of the delay may vary from implementation to implementation, + * version to version, or even depend on the encoder's initial configuration. + * Applications needing delay compensation should call this CTL rather than + * hard-coding a value. + * @param[out] x opus_int32 *: Number of lookahead samples + * @hideinitializer */ +#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of inband forward error correction (FEC). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_INBAND_FEC + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Disable inband FEC (default).
+ *
1
Inband FEC enabled. If the packet loss rate is sufficiently high, Opus will automatically switch to SILK even at high rates to enable use of that FEC.
+ *
2
Inband FEC enabled, but does not necessarily switch to SILK if we have music.
+ *
+ * @hideinitializer */ +#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of inband forward error correction. + * @see OPUS_SET_INBAND_FEC + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
Inband FEC disabled (default).
+ *
1
Inband FEC enabled. If the packet loss rate is sufficiently high, Opus will automatically switch to SILK even at high rates to enable use of that FEC.
+ *
2
Inband FEC enabled, but does not necessarily switch to SILK if we have music.
+ *
+ * @hideinitializer */ +#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's expected packet loss percentage. + * Higher values trigger progressively more loss resistant behavior in the encoder + * at the expense of quality at a given bitrate in the absence of packet loss, but + * greater quality under loss. + * @see OPUS_GET_PACKET_LOSS_PERC + * @param[in] x opus_int32: Loss percentage in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured packet loss percentage. + * @see OPUS_SET_PACKET_LOSS_PERC + * @param[out] x opus_int32 *: Returns the configured loss percentage + * in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of discontinuous transmission (DTX). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_DTX + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Disable DTX (default).
+ *
1
Enabled DTX.
+ *
+ * @hideinitializer */ +#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of discontinuous transmission. + * @see OPUS_SET_DTX + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
DTX disabled (default).
+ *
1
DTX enabled.
+ *
+ * @hideinitializer */ +#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x) +/** Configures the depth of signal being encoded. + * + * This is a hint which helps the encoder identify silence and near-silence. + * It represents the number of significant bits of linear intensity below + * which the signal contains ignorable quantization or other noise. + * + * For example, OPUS_SET_LSB_DEPTH(14) would be an appropriate setting + * for G.711 u-law input. OPUS_SET_LSB_DEPTH(16) would be appropriate + * for 16-bit linear pcm input with opus_encode_float(). + * + * When using opus_encode() instead of opus_encode_float(), or when libopus + * is compiled for fixed-point, the encoder uses the minimum of the value + * set here and the value 16. + * + * @see OPUS_GET_LSB_DEPTH + * @param[in] x opus_int32: Input precision in bits, between 8 and 24 + * (default: 24). + * @hideinitializer */ +#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal depth. + * @see OPUS_SET_LSB_DEPTH + * @param[out] x opus_int32 *: Input precision in bits, between 8 and + * 24 (default: 24). + * @hideinitializer */ +#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of variable duration frames. + * When variable duration is enabled, the encoder is free to use a shorter frame + * size than the one requested in the opus_encode*() call. + * It is then the user's responsibility + * to verify how much audio was encoded by checking the ToC byte of the encoded + * packet. The part of the audio that was not encoded needs to be resent to the + * encoder for the next call. Do not use this option unless you really + * know what you are doing. + * @see OPUS_GET_EXPERT_FRAME_DURATION + * @param[in] x opus_int32: Allowed values: + *
+ *
OPUS_FRAMESIZE_ARG
Select frame size from the argument (default).
+ *
OPUS_FRAMESIZE_2_5_MS
Use 2.5 ms frames.
+ *
OPUS_FRAMESIZE_5_MS
Use 5 ms frames.
+ *
OPUS_FRAMESIZE_10_MS
Use 10 ms frames.
+ *
OPUS_FRAMESIZE_20_MS
Use 20 ms frames.
+ *
OPUS_FRAMESIZE_40_MS
Use 40 ms frames.
+ *
OPUS_FRAMESIZE_60_MS
Use 60 ms frames.
+ *
OPUS_FRAMESIZE_80_MS
Use 80 ms frames.
+ *
OPUS_FRAMESIZE_100_MS
Use 100 ms frames.
+ *
OPUS_FRAMESIZE_120_MS
Use 120 ms frames.
+ *
+ * @hideinitializer */ +#define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured use of variable duration frames. + * @see OPUS_SET_EXPERT_FRAME_DURATION + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
OPUS_FRAMESIZE_ARG
Select frame size from the argument (default).
+ *
OPUS_FRAMESIZE_2_5_MS
Use 2.5 ms frames.
+ *
OPUS_FRAMESIZE_5_MS
Use 5 ms frames.
+ *
OPUS_FRAMESIZE_10_MS
Use 10 ms frames.
+ *
OPUS_FRAMESIZE_20_MS
Use 20 ms frames.
+ *
OPUS_FRAMESIZE_40_MS
Use 40 ms frames.
+ *
OPUS_FRAMESIZE_60_MS
Use 60 ms frames.
+ *
OPUS_FRAMESIZE_80_MS
Use 80 ms frames.
+ *
OPUS_FRAMESIZE_100_MS
Use 100 ms frames.
+ *
OPUS_FRAMESIZE_120_MS
Use 120 ms frames.
+ *
+ * @hideinitializer */ +#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** If set to 1, disables almost all use of prediction, making frames almost + * completely independent. This reduces quality. + * @see OPUS_GET_PREDICTION_DISABLED + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Enable prediction (default).
+ *
1
Disable prediction.
+ *
+ * @hideinitializer */ +#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured prediction status. + * @see OPUS_SET_PREDICTION_DISABLED + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
Prediction enabled (default).
+ *
1
Prediction disabled.
+ *
+ * @hideinitializer */ +#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_genericctls Generic CTLs + * + * These macros are used with the \c opus_decoder_ctl and + * \c opus_encoder_ctl calls to generate a particular + * request. + * + * When called on an \c OpusDecoder they apply to that + * particular decoder instance. When called on an + * \c OpusEncoder they apply to the corresponding setting + * on that encoder instance, if present. + * + * Some usage examples: + * + * @code + * int ret; + * opus_int32 pitch; + * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch)); + * if (ret == OPUS_OK) return ret; + * + * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE); + * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE); + * + * opus_int32 enc_bw, dec_bw; + * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw)); + * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw)); + * if (enc_bw != dec_bw) { + * printf("packet bandwidth mismatch!\n"); + * } + * @endcode + * + * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls + * @{ + */ + +/** Resets the codec state to be equivalent to a freshly initialized state. + * This should be called when switching streams in order to prevent + * the back to back decoding from giving different results from + * one at a time decoding. + * @hideinitializer */ +#define OPUS_RESET_STATE 4028 + +/** Gets the final state of the codec's entropy coder. + * This is used for testing purposes, + * The encoder and decoder state should be identical after coding a payload + * (assuming no data corruption or software bugs) + * + * @param[out] x opus_uint32 *: Entropy coder state + * + * @hideinitializer */ +#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x) + +/** Gets the encoder's configured bandpass or the decoder's last bandpass. + * @see OPUS_SET_BANDWIDTH + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
#OPUS_AUTO
(default)
+ *
#OPUS_BANDWIDTH_NARROWBAND
4 kHz passband
+ *
#OPUS_BANDWIDTH_MEDIUMBAND
6 kHz passband
+ *
#OPUS_BANDWIDTH_WIDEBAND
8 kHz passband
+ *
#OPUS_BANDWIDTH_SUPERWIDEBAND
12 kHz passband
+ *
#OPUS_BANDWIDTH_FULLBAND
20 kHz passband
+ *
+ * @hideinitializer */ +#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/** Gets the sampling rate the encoder or decoder was initialized with. + * This simply returns the Fs value passed to opus_encoder_init() + * or opus_decoder_init(). + * @param[out] x opus_int32 *: Sampling rate of encoder or decoder. + * @hideinitializer + */ +#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x) + +/** If set to 1, disables the use of phase inversion for intensity stereo, + * improving the quality of mono downmixes, but slightly reducing normal + * stereo quality. Disabling phase inversion in the decoder does not comply + * with RFC 6716, although it does not cause any interoperability issue and + * is expected to become part of the Opus standard once RFC 6716 is updated + * by draft-ietf-codec-opus-update. + * @see OPUS_GET_PHASE_INVERSION_DISABLED + * @param[in] x opus_int32: Allowed values: + *
+ *
0
Enable phase inversion (default).
+ *
1
Disable phase inversion.
+ *
+ * @hideinitializer */ +#define OPUS_SET_PHASE_INVERSION_DISABLED(x) OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured phase inversion status. + * @see OPUS_SET_PHASE_INVERSION_DISABLED + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
Stereo phase inversion enabled (default).
+ *
1
Stereo phase inversion disabled.
+ *
+ * @hideinitializer */ +#define OPUS_GET_PHASE_INVERSION_DISABLED(x) OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int_ptr(x) +/** Gets the DTX state of the encoder. + * Returns whether the last encoded frame was either a comfort noise update + * during DTX or not encoded because of DTX. + * @param[out] x opus_int32 *: Returns one of the following values: + *
+ *
0
The encoder is not in DTX.
+ *
1
The encoder is in DTX.
+ *
+ * @hideinitializer */ +#define OPUS_GET_IN_DTX(x) OPUS_GET_IN_DTX_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_decoderctls Decoder related CTLs + * @see opus_genericctls, opus_encoderctls, opus_decoder + * @{ + */ + +/** Configures decoder gain adjustment. + * Scales the decoded output by a factor specified in Q8 dB units. + * This has a maximum range of -32768 to 32767 inclusive, and returns + * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment. + * This setting survives decoder reset. + * + * gain = pow(10, x/(20.0*256)) + * + * @param[in] x opus_int32: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x) +/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN + * + * @param[out] x opus_int32 *: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x) + +/** Gets the duration (in samples) of the last packet successfully decoded or concealed. + * @param[out] x opus_int32 *: Number of samples (at current sampling rate). + * @hideinitializer */ +#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** Gets the pitch of the last decoded frame, if available. + * This can be used for any post-processing algorithm requiring the use of pitch, + * e.g. time stretching/shortening. If the last frame was not voiced, or if the + * pitch was not coded in the frame, then zero is returned. + * + * This CTL is only implemented for decoder instances. + * + * @param[out] x opus_int32 *: pitch period at 48 kHz (or 0 if not available) + * + * @hideinitializer */ +#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_libinfo Opus library information functions + * @{ + */ + +/** Converts an opus error code into a human readable string. + * + * @param[in] error int: Error number + * @returns Error string + */ +OPUS_EXPORT const char *opus_strerror(int error); + +/** Gets the libopus version string. + * + * Applications may look for the substring "-fixed" in the version string to + * determine whether they have a fixed-point or floating-point build at + * runtime. + * + * @returns Version string + */ +OPUS_EXPORT const char *opus_get_version_string(void); +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_DEFINES_H */ -- cgit v1.2.3