From 26a029d407be480d791972afb5975cf62c9360a6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 02:47:55 +0200 Subject: Adding upstream version 124.0.1. Signed-off-by: Daniel Baumann --- security/nss/lib/freebl/mpi/README | 646 +++++++++++++++++++++++++++++++++++++ 1 file changed, 646 insertions(+) create mode 100644 security/nss/lib/freebl/mpi/README (limited to 'security/nss/lib/freebl/mpi/README') diff --git a/security/nss/lib/freebl/mpi/README b/security/nss/lib/freebl/mpi/README new file mode 100644 index 0000000000..a49aa9d8d7 --- /dev/null +++ b/security/nss/lib/freebl/mpi/README @@ -0,0 +1,646 @@ +This Source Code Form is subject to the terms of the Mozilla Public +License, v. 2.0. If a copy of the MPL was not distributed with this +file, You can obtain one at http://mozilla.org/MPL/2.0/. + +About the MPI Library +--------------------- + +The files 'mpi.h' and 'mpi.c' define a simple, arbitrary precision +signed integer arithmetic package. The implementation is not the most +efficient possible, but the code is small and should be fairly easily +portable to just about any machine that supports an ANSI C compiler, +as long as it is capable of at least 16-bit arithmetic (but also see +below for more on this). + +This library was written with an eye to cryptographic applications; +thus, some care is taken to make sure that temporary values are not +left lying around in memory when they are no longer in use. This adds +some overhead for zeroing buffers before they are released back into +the free pool; however, it gives you the assurance that there is only +one copy of your important values residing in your process's address +space at a time. Obviously, it is difficult to guarantee anything, in +a pre-emptive multitasking environment, but this at least helps you +keep a lid on the more obvious ways your data can get spread around in +memory. + + +Using the Library +----------------- + +To use the MPI library in your program, you must include the header: + +#include "mpi.h" + +This header provides all the type and function declarations you'll +need to use the library. Almost all the names defined by the library +begin with the prefix 'mp_', so it should be easy to keep them from +clashing with your program's namespace (he says, glibly, knowing full +well there are always pathological cases). + +There are a few things you may want to configure about the library. +By default, the MPI library uses an unsigned short for its digit type, +and an unsigned int for its word type. The word type must be big +enough to contain at least two digits, for the primitive arithmetic to +work out. On my machine, a short is 2 bytes and an int is 4 bytes -- +but if you have 64-bit ints, you might want to use a 4-byte digit and +an 8-byte word. I have tested the library using 1-byte digits and +2-byte words, as well. Whatever you choose to do, the things you need +to change are: + +(1) The type definitions for mp_digit and mp_word. + +(2) The macro DIGIT_FMT which tells mp_print() how to display a + single digit. This is just a printf() format string, so you + can adjust it appropriately. + +(3) The macros DIGIT_MAX and MP_WORD_MAX, which specify the + largest value expressible in an mp_digit and an mp_word, + respectively. + +Both the mp_digit and mp_word should be UNSIGNED integer types. The +code relies on having the full positive precision of the type used for +digits and words. + +The remaining type definitions should be left alone, for the most +part. The code in the library does not make any significant +assumptions about the sizes of things, but there is little if any +reason to change the other parameters, so I would recommend you leave +them as you found them. + + +Conventions +----------- + +Most functions in the library return a value of type mp_err. This +permits the library to communicate success or various kinds of failure +to the calling program. The return values currently defined are: + + MP_OKAY - okay, operation succeeded, all's well + MP_YES - okay, the answer is yes (same as MP_OKAY) + MP_NO - okay, but answer is no (not MP_OKAY) + MP_MEM - operation ran out of memory + MP_RANGE - input parameter was out of range + MP_BADARG - an invalid input parameter was provided + MP_UNDEF - no output value is defined for this input + +The only function which currently uses MP_UNDEF is mp_invmod(). +Division by zero is undefined, but the division functions will return +MP_RANGE for a zero divisor. MP_BADARG usually means you passed a +bogus mp_int structure to the function. MP_YES and MP_NO are not used +by the library itself; they're defined so you can use them in your own +extensions. + +If you need a readable interpretation of these error codes in your +program, you may also use the mp_strerror() function. This function +takes an mp_err as input, and returns a pointer to a human-readable +string describing the meaning of the error. These strings are stored +as constants within the library, so the caller should not attempt to +modify or free the memory associated with these strings. + +The library represents values in signed-magnitude format. Values +strictly less than zero are negative, all others are considered +positive (zero is positive by fiat). You can access the 'sign' member +of the mp_int structure directly, but better is to use the mp_cmp_z() +function, to find out which side of zero the value lies on. + +Most arithmetic functions have a single-digit variant, as well as the +full arbitrary-precision. An mp_digit is an unsigned value between 0 +and DIGIT_MAX inclusive. The radix is available as RADIX. The number +of bits in a given digit is given as DIGIT_BIT. + +Generally, input parameters are given before output parameters. +Unless otherwise specified, any input parameter can be re-used as an +output parameter, without confusing anything. + +The basic numeric type defined by the library is an mp_int. Virtually +all the functions in the library take a pointer to an mp_int as one of +their parameters. An explanation of how to create and use these +structures follows. And so, without further ado... + + +Initialization and Cleanup +-------------------------- + +The basic numeric type defined by the library is an 'mp_int'. +However, it is not sufficient to simply declare a variable of type +mp_int in your program. These variables also need to be initialized +before they can be used, to allocate the internal storage they require +for computation. + +This is done using one of the following functions: + + mp_init(mp_int *mp); + mp_init_copy(mp_int *mp, mp_int *from); + mp_init_size(mp_int *mp, mp_size p); + +Each of these requires a pointer to a structure of type mp_int. The +basic mp_init() simply initializes the mp_int to a default size, and +sets its value to zero. If you would like to initialize a copy of an +existing mp_int, use mp_init_copy(), where the 'from' parameter is the +mp_int you'd like to make a copy of. The third function, +mp_init_size(), permits you to specify how many digits of precision +should be preallocated for your mp_int. This can help the library +avoid unnecessary re-allocations later on. + +The default precision used by mp_init() can be retrieved using: + + precision = mp_get_prec(); + +This returns the number of digits that will be allocated. You can +change this value by using: + + mp_set_prec(unsigned int prec); + +Any positive value is acceptable -- if you pass zero, the default +precision will be re-set to the compiled-in library default (this is +specified in the header file 'mpi-config.h', and typically defaults to +8 or 16). + +Just as you must allocate an mp_int before you can use it, you must +clean up the structure when you are done with it. This is performed +using the mp_clear() function. Remember that any mp_int that you +create as a local variable in a function must be mp_clear()'d before +that function exits, or else the memory allocated to that mp_int will +be orphaned and unrecoverable. + +To set an mp_int to a given value, the following functions are given: + + mp_set(mp_int *mp, mp_digit d); + mp_set_int(mp_int *mp, long z); + mp_set_ulong(mp_int *mp, unsigned long z); + +The mp_set() function sets the mp_int to a single digit value, while +mp_set_int() sets the mp_int to a signed long integer value. + +To set an mp_int to zero, use: + + mp_zero(mp_int *mp); + + +Copying and Moving +------------------ + +If you have two initialized mp_int's, and you want to copy the value +of one into the other, use: + + mp_copy(from, to) + +This takes care of clearing the old value of 'to', and copies the new +value into it. If 'to' is not yet initialized, use mp_init_copy() +instead (see above). + +Note: The library tries, whenever possible, to avoid allocating +---- new memory. Thus, mp_copy() tries first to satisfy the needs + of the copy by re-using the memory already allocated to 'to'. + Only if this proves insufficient will mp_copy() actually + allocate new memory. + + For this reason, if you know a priori that 'to' has enough + available space to hold 'from', you don't need to check the + return value of mp_copy() for memory failure. The USED() + macro tells you how many digits are used by an mp_int, and + the ALLOC() macro tells you how many are allocated. + +If you have two initialized mp_int's, and you want to exchange their +values, use: + + mp_exch(a, b) + +This is better than using mp_copy() with a temporary, since it will +not (ever) touch the memory allocator -- it just swaps the exact +contents of the two structures. The mp_exch() function cannot fail; +if you pass it an invalid structure, it just ignores it, and does +nothing. + + +Basic Arithmetic +---------------- + +Once you have initialized your integers, you can operate on them. The +basic arithmetic functions on full mp_int values are: + +mp_add(a, b, c) - computes c = a + b +mp_sub(a, b, c) - computes c = a - b +mp_mul(a, b, c) - computes c = a * b +mp_sqr(a, b) - computes b = a * a +mp_div(a, b, q, r) - computes q, r such that a = bq + r +mp_div_2d(a, d, q, r) - computes q = a / 2^d, r = a % 2^d +mp_expt(a, b, c) - computes c = a ** b +mp_2expt(a, k) - computes a = 2^k + +The mp_div_2d() function efficiently computes division by powers of +two. Either the q or r parameter may be NULL, in which case that +portion of the computation will be discarded. + +The algorithms used for some of the computations here are described in +the following files which are included with this distribution: + +mul.txt Describes the multiplication algorithm +div.txt Describes the division algorithm +expt.txt Describes the exponentiation algorithm +sqrt.txt Describes the square-root algorithm +square.txt Describes the squaring algorithm + +There are single-digit versions of most of these routines, as well. +In the following prototypes, 'd' is a single mp_digit: + +mp_add_d(a, d, c) - computes c = a + d +mp_sub_d(a, d, c) - computes c = a - d +mp_mul_d(a, d, c) - computes c = a * d +mp_mul_2(a, c) - computes c = a * 2 +mp_div_d(a, d, q, r) - computes q, r such that a = bq + r +mp_div_2(a, c) - computes c = a / 2 +mp_expt_d(a, d, c) - computes c = a ** d + +The mp_mul_2() and mp_div_2() functions take advantage of the internal +representation of an mp_int to do multiplication by two more quickly +than mp_mul_d() would. Other basic functions of an arithmetic variety +include: + +mp_zero(a) - assign 0 to a +mp_neg(a, c) - negate a: c = -a +mp_abs(a, c) - absolute value: c = |a| + + +Comparisons +----------- + +Several comparison functions are provided. Each of these, unless +otherwise specified, returns zero if the comparands are equal, < 0 if +the first is less than the second, and > 0 if the first is greater +than the second: + +mp_cmp_z(a) - compare a <=> 0 +mp_cmp_d(a, d) - compare a <=> d, d is a single digit +mp_cmp(a, b) - compare a <=> b +mp_cmp_mag(a, b) - compare |a| <=> |b| +mp_isodd(a) - return nonzero if odd, zero otherwise +mp_iseven(a) - return nonzero if even, zero otherwise + + +Modular Arithmetic +------------------ + +Modular variations of the basic arithmetic functions are also +supported. These are available if the MP_MODARITH parameter in +mpi-config.h is turned on (it is by default). The modular arithmetic +functions are: + +mp_mod(a, m, c) - compute c = a (mod m), 0 <= c < m +mp_mod_d(a, d, c) - compute c = a (mod d), 0 <= c < d (see below) +mp_addmod(a, b, m, c) - compute c = (a + b) mod m +mp_submod(a, b, m, c) - compute c = (a - b) mod m +mp_mulmod(a, b, m, c) - compute c = (a * b) mod m +mp_sqrmod(a, m, c) - compute c = (a * a) mod m +mp_exptmod(a, b, m, c) - compute c = (a ** b) mod m +mp_exptmod_d(a, d, m, c)- compute c = (a ** d) mod m + +The mp_sqr() function squares its input argument. A call to mp_sqr(a, +c) is identical in meaning to mp_mul(a, a, c); however, if the +MP_SQUARE variable is set true in mpi-config.h (see below), then it +will be implemented with a different algorithm, that is supposed to +take advantage of the redundant computation that takes place during +squaring. Unfortunately, some compilers result in worse performance +on this code, so you can change the behaviour at will. There is a +utility program "mulsqr.c" that lets you test which does better on +your system. + +The mp_sqrmod() function is analogous to the mp_sqr() function; it +uses the mp_sqr() function rather than mp_mul(), and then performs the +modular reduction. This probably won't help much unless you are doing +a lot of them. + +See the file 'square.txt' for a synopsis of the algorithm used. + +Note: The mp_mod_d() function computes a modular reduction around +---- a single digit d. The result is a single digit c. + +Because an inverse is defined for a (mod m) if and only if (a, m) = 1 +(that is, if a and m are relatively prime), mp_invmod() may not be +able to compute an inverse for the arguments. In this case, it +returns the value MP_UNDEF, and does not modify c. If an inverse is +defined, however, it returns MP_OKAY, and sets c to the value of the +inverse (mod m). + +See the file 'redux.txt' for a description of the modular reduction +algorithm used by mp_exptmod(). + + +Greatest Common Divisor +----------------------- + +If The greates common divisor of two values can be found using one of the +following functions: + +mp_gcd(a, b, c) - compute c = (a, b) using binary algorithm +mp_lcm(a, b, c) - compute c = [a, b] = ab / (a, b) +mp_xgcd(a, b, g, x, y) - compute g, x, y so that ax + by = g = (a, b) + +Also provided is a function to compute modular inverses, if they +exist: + +mp_invmod(a, m, c) - compute c = a^-1 (mod m), if it exists + +The function mp_xgcd() computes the greatest common divisor, and also +returns values of x and y satisfying Bezout's identity. This is used +by mp_invmod() to find modular inverses. However, if you do not need +these values, you will find that mp_gcd() is MUCH more efficient, +since it doesn't need all the intermediate values that mp_xgcd() +requires in order to compute x and y. + +The mp_gcd() (and mp_xgcd()) functions use the binary (extended) GCD +algorithm due to Josef Stein. + + +Input & Output Functions +------------------------ + +The following basic I/O routines are provided. These are present at +all times: + +mp_read_radix(mp, str, r) - convert a string in radix r to an mp_int +mp_read_raw(mp, s, len) - convert a string of bytes to an mp_int +mp_radix_size(mp, r) - return length of buffer needed by mp_toradix() +mp_raw_size(mp) - return length of buffer needed by mp_toraw() +mp_toradix(mp, str, r) - convert an mp_int to a string of radix r + digits +mp_toraw(mp, str) - convert an mp_int to a string of bytes +mp_tovalue(ch, r) - convert ch to its value when taken as + a radix r digit, or -1 if invalid +mp_strerror(err) - get a string describing mp_err value 'err' + +If you compile the MPI library with MP_IOFUNC defined, you will also +have access to the following additional I/O function: + +mp_print(mp, ofp) - print an mp_int as text to output stream ofp + +Note that mp_radix_size() returns a size in bytes guaranteed to be AT +LEAST big enough for the digits output by mp_toradix(). Because it +uses an approximation technique to figure out how many digits will be +needed, it may return a figure which is larger than necessary. Thus, +the caller should not rely on the value to determine how many bytes +will actually be written by mp_toradix(). The string mp_toradix() +creates will be NUL terminated, so the standard C library function +strlen() should be able to ascertain this for you, if you need it. + +The mp_read_radix() and mp_toradix() functions support bases from 2 to +64 inclusive. If you require more general radix conversion facilities +than this, you will need to write them yourself (that's why mp_div_d() +is provided, after all). + +Note: mp_read_radix() will accept as digits either capital or +---- lower-case letters. However, the current implementation of + mp_toradix() only outputs upper-case letters, when writing + bases betwee 10 and 36. The underlying code supports using + lower-case letters, but the interface stub does not have a + selector for it. You can add one yourself if you think it + is worthwhile -- I do not. Bases from 36 to 64 use lower- + case letters as distinct from upper-case. Bases 63 and + 64 use the characters '+' and '/' as digits. + + Note also that compiling with MP_IOFUNC defined will cause + inclusion of , so if you are trying to write code + which does not depend on the standard C library, you will + probably want to avoid this option. This is needed because + the mp_print() function takes a standard library FILE * as + one of its parameters, and uses the fprintf() function. + +The mp_toraw() function converts the integer to a sequence of bytes, +in big-endian ordering (most-significant byte first). Assuming your +bytes are 8 bits wide, this corresponds to base 256. The sign is +encoded as a single leading byte, whose value is 0 for zero or +positive values, or 1 for negative values. The mp_read_raw() function +reverses this process -- it takes a buffer of bytes, interprets the +first as a sign indicator (0 = zero/positive, nonzero = negative), and +the rest as a sequence of 1-byte digits in big-endian ordering. + +The mp_raw_size() function returns the exact number of bytes required +to store the given integer in "raw" format (as described in the +previous paragraph). Zero is returned in case of error; a valid +integer will require at least three bytes of storage. + +In previous versions of the MPI library, an "external representation +format" was supported. This was removed, however, because I found I +was never using it, it was not as portable as I would have liked, and +I decided it was a waste of space. + + +Other Functions +--------------- + +The files 'mpprime.h' and 'mpprime.c' define some routines which are +useful for divisibility testing and probabilistic primality testing. +The routines defined are: + +mpp_divis(a, b) - is a divisible by b? +mpp_divis_d(a, d) - is a divisible by digit d? +mpp_random(a) - set a to random value at current precision +mpp_random_size(a, prec) - set a to random value at given precision + +Note: The mpp_random() and mpp_random_size() functions use the C +---- library's rand() function to generate random values. It is + up to the caller to seed this generator before it is called. + These functions are not suitable for generating quantities + requiring cryptographic-quality randomness; they are intended + primarily for use in primality testing. + + Note too that the MPI library does not call srand(), so your + application should do this, if you ever want the sequence + to change. + +mpp_divis_vector(a, v, s, w) - is a divisible by any of the s digits + in v? If so, let w be the index of + that digit + +mpp_divis_primes(a, np) - is a divisible by any of the first np + primes? If so, set np to the prime + which divided a. + +mpp_fermat(a, d) - test if w^a = w (mod a). If so, + returns MP_YES, otherwise MP_NO. + +mpp_pprime(a, nt) - perform nt iterations of the Rabin- + Miller probabilistic primality test + on a. Returns MP_YES if all tests + passed, or MP_NO if any test fails. + +The mpp_fermat() function works based on Fermat's little theorem, a +consequence of which is that if p is a prime, and (w, p) = 1, then: + + w^p = w (mod p) + +Put another way, if w^p != w (mod p), then p is not prime. The test +is expensive to compute, but it helps to quickly eliminate an enormous +class of composite numbers prior to Rabin-Miller testing. + +Building the Library +-------------------- + +The MPI library is designed to be as self-contained as possible. You +should be able to compile it with your favourite ANSI C compiler, and +link it into your program directly. If you are on a Unix system using +the GNU C compiler (gcc), the following should work: + +% gcc -ansi -pedantic -Wall -O2 -c mpi.c + +The file 'mpi-config.h' defines several configurable parameters for +the library, which you can adjust to suit your application. At the +time of this writing, the available options are: + +MP_IOFUNC - Define true to include the mp_print() function, + which is moderately useful for debugging. This + implicitly includes . + +MP_MODARITH - Define true to include the modular arithmetic + functions. If you don't need modular arithmetic + in your application, you can set this to zero to + leave out all the modular routines. + +MP_LOGTAB - If true, the file "logtab.h" is included, which + is basically a static table of base 2 logarithms. + These are used to compute how big the buffers for + radix conversion need to be. If you set this false, + the library includes and uses log(). This + typically forces you to link against math libraries. + + +MP_ARGCHK - Set to 0, 1, or 2. This defines how the argument + checking macro, ARGCHK(), gets expanded. If this + is set to zero, ARGCHK() expands to nothing; no + argument checks are performed. If this is 1, the + ARGCHK() macro expands to code that returns MP_BADARG + or similar at runtime. If it is 2, ARGCHK() expands + to an assert() call that aborts the program on a + bad input. + +MP_DEBUG - Turns on debugging output. This is probably not at + all useful unless you are debugging the library. It + tends to spit out a LOT of output. + +MP_DEFPREC - The default precision of a newly-created mp_int, in + digits. The precision can be changed at runtime by + the mp_set_prec() function, but this is its initial + value. + +MP_SQUARE - If this is set to a nonzero value, the mp_sqr() + function will use an alternate algorithm that takes + advantage of the redundant inner product computation + when both multiplicands are identical. Unfortunately, + with some compilers this is actually SLOWER than just + calling mp_mul() with the same argument twice. So + if you set MP_SQUARE to zero, mp_sqr() will be expan- + ded into a call to mp_mul(). This applies to all + the uses of mp_sqr(), including mp_sqrmod() and the + internal calls to s_mp_sqr() inside mpi.c + + The program 'mulsqr' (mulsqr.c) can be used to test + which works best for your configuration. Set up the + CC and CFLAGS variables in the Makefile, then type: + + make mulsqr + + Invoke it with arguments similar to the following: + + mulsqr 25000 1024 + + That is, 25000 products computed on 1024-bit values. + The output will compare the two timings, and recommend + a setting for MP_SQUARE. It is off by default. + +If you would like to use the mp_print() function (see above), be sure +to define MP_IOFUNC in mpi-config.h. Many of the test drivers in the +'tests' subdirectory expect this to be defined (although the test +driver 'mpi-test' doesn't need it) + +The Makefile which comes with the library should take care of building +the library for you, if you have set the CC and CFLAGS variables at +the top of the file appropriately. By default, they are set up to +use the GNU C compiler: + +CC=gcc +CFLAGS=-ansi -pedantic -Wall -O2 + +If all goes well, the library should compile without warnings using +this combination. You should, of course, make whatever adjustments +you find necessary. + +The MPI library distribution comes with several additional programs +which are intended to demonstrate the use of the library, and provide +a framework for testing it. There are a handful of test driver +programs, in the files named 'mptest-X.c', where X is a digit. Also, +there are some simple command-line utilities (in the 'utils' +directory) for manipulating large numbers. These include: + +basecvt.c A radix-conversion program, supporting bases from + 2 to 64 inclusive. + +bbsrand.c A BBS (quadratic residue) pseudo-random number + generator. The file 'bbsrand.c' is just the driver + for the program; the real code lives in the files + 'bbs_rand.h' and 'bbs_rand.c' + +dec2hex.c Converts decimal to hexadecimal + +gcd.c Computes the greatest common divisor of two values. + If invoked as 'xgcd', also computes constants x and + y such that (a, b) = ax + by, in accordance with + Bezout's identity. + +hex2dec.c Converts hexadecimal to decimal + +invmod.c Computes modular inverses + +isprime.c Performs the Rabin-Miller probabilistic primality + test on a number. Values which fail this test are + definitely composite, and those which pass are very + likely to be prime (although there are no guarantees) + +lap.c Computes the order (least annihilating power) of + a value v modulo m. Very dumb algorithm. + +primegen.c Generates large (probable) primes. + +prng.c A pseudo-random number generator based on the + BBS generator code in 'bbs_rand.c' + +sieve.c Implements the Sieve of Eratosthenes, using a big + bitmap, to generate a list of prime numbers. + +fact.c Computes the factorial of an arbitrary precision + integer (iterative). + +exptmod.c Computes arbitrary precision modular exponentiation + from the command line (exptmod a b m -> a^b (mod m)) + +Most of these can be built from the Makefile that comes with the +library. Try 'make tools', if your environment supports it. + + +Acknowledgements: +---------------- + +The algorithms used in this library were drawn primarily from Volume +2 of Donald Knuth's magnum opus, _The Art of Computer Programming_, +"Semi-Numerical Methods". Barrett's algorithm for modular reduction +came from Menezes, Oorschot, and Vanstone's _Handbook of Applied +Cryptography_, Chapter 14. + +Thanks are due to Tom St. Denis, for finding an obnoxious sign-related +bug in mp_read_raw() that made things break on platforms which use +signed chars. + +About the Author +---------------- + +This software was written by Michael J. Fromberger. You can contact +the author as follows: + +E-mail: + +Postal: 8000 Cummings Hall, Thayer School of Engineering + Dartmouth College, Hanover, New Hampshire, USA + +PGP key: http://linguist.dartmouth.edu/~sting/keys/mjf.html + 9736 188B 5AFA 23D6 D6AA BE0D 5856 4525 289D 9907 + +Last updated: 16-Jan-2000 -- cgit v1.2.3