From 26a029d407be480d791972afb5975cf62c9360a6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 02:47:55 +0200 Subject: Adding upstream version 124.0.1. Signed-off-by: Daniel Baumann --- toolkit/components/extensions/docs/other.rst | 140 +++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 toolkit/components/extensions/docs/other.rst (limited to 'toolkit/components/extensions/docs/other.rst') diff --git a/toolkit/components/extensions/docs/other.rst b/toolkit/components/extensions/docs/other.rst new file mode 100644 index 0000000000..85a9b6db41 --- /dev/null +++ b/toolkit/components/extensions/docs/other.rst @@ -0,0 +1,140 @@ +Utilities for implementing APIs +=============================== + +This page covers some utility classes that are useful for +implementing WebExtension APIs: + +WindowManager +------------- +This class manages the mapping between the opaque window identifiers used +in the `browser.windows `__ API. +See the reference docs `here `__. + +TabManager +---------- +This class manages the mapping between the opaque tab identifiers used +in the `browser.tabs `__ API. +See the reference docs `here `__. + +ExtensionSettingsStore +---------------------- +ExtensionSettingsStore (ESS) is used for storing changes to settings that are +requested by extensions, and for finding out what the current value +of a setting should be, based on the precedence chain or a specific selection +made (typically) by the user. + +When multiple extensions request to make a change to a particular +setting, the most recently installed extension will be given +precedence. + +It is also possible to select a specific extension (or no extension, which +infers user-set) to control a setting. This will typically only happen via +ExtensionPreferencesManager described below. When this happens, precedence +control is not used until either a new extension is installed, or the controlling +extension is disabled or uninstalled. If user-set is specifically chosen, +precedence order will only be returned to by installing a new extension that +takes control of the setting. + +ESS will manage what has control over a setting through any +extension state changes (ie. install, uninstall, enable, disable). + +Notifications: +^^^^^^^^^^^^^^ + +"extension-setting-changed": +**************************** + + When a setting changes an event is emitted via the apiManager. It contains + the following: + + * *action*: one of select, remove, enable, disable + + * *id*: the id of the extension for which the setting has changed, may be null + if the setting has returned to default or user set. + + * *type*: The type of setting altered. This is defined by the module using ESS. + If the setting is controlled through the ExtensionPreferencesManager below, + the value will be "prefs". + + * *key*: The name of the setting altered. + + * *item*: The new value, if any that has taken control of the setting. + + +ExtensionPreferencesManager +--------------------------- +ExtensionPreferencesManager (EPM) is used to manage what extensions may control a +setting that results in changing a preference. EPM adds additional logic on top +of ESS to help manage the preference values based on what is in control of a +setting. + +Defining a setting in an API +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +A preference setting is defined in an API module by calling EPM.addSetting. addSetting +allows the API to use callbacks that can handle setting preferences as needed. Since +the setting is defined at runtime, the API module must be loaded as necessary by EPM +to properly manage settings. + +In the api module definition (e.g. ext-toolkit.json), the api must use `"settings": true` +so the management code can discover which API modules to load in order to manage a +setting. See browserSettings[1] as an example. + +Settings that are exposed to the user in about:preferences also require special handling. +We typically show that an extension is in control of the preference, and prevent changes +to the setting. Some settings may allow the user to choose which extension (or none) has +control of the setting. + +Preferences behavior +^^^^^^^^^^^^^^^^^^^^ + +To actually set a setting, the module must call EPM.setSetting. This is typically done +via an extension API, such as browserSettings.settingName.set({ ...value data... }), though +it may be done at other times, such as during extension startup or install in a modules +onManifest handler. + +Preferences are not always changed when an extension uses an API that results in a call +to EPM.setSetting. When setSetting is called, the values are stored by ESS (above), and if +the extension currently has control, or the setting is controllable by the extension, then +the preferences would be updated. + +The preferences would also potentially be updated when installing, enabling, disabling or +uninstalling an extension, or by a user action in about:preferences (or other UI that +allows controlling the preferences). If all extensions that use a preference setting are +disabled or uninstalled, the prior user-set or default values would be returned to. + +An extension may watch for changes using the onChange api (e.g. browserSettings.settingName.onChange). + +[1] https://searchfox.org/mozilla-central/rev/04d8e7629354bab9e6a285183e763410860c5006/toolkit/components/extensions/ext-toolkit.json#19 + +Notifications: +^^^^^^^^^^^^^^ + +"extension-setting-changed:*name*": +*********************************** + + When a setting controlled by EPM changes an event is emitted via the apiManager. It contains + no other data. This is used primarily to implement the onChange API. + +ESS vs. EPM +----------- +An API may use ESS when it needs to allow an extension to store a setting value that +affects how Firefox works, but does not result in setting a preference. An example +is allowing an extension to change the newTab value in the newTab service. + +An API should use EPM when it needs to allow an extension to change a preference. + +Using ESS/EPM with experimental APIs +------------------------------------ + +Properly managing settings values depends on the ability to load any modules that +define a setting. Since experimental APIs are defined inside the extension, there +are situations where settings defined in experimental APIs may not be correctly +managed. The could result in a preference remaining set by the extension after +the extension is disabled or installed, especially when that state is updated during +safe mode. + +Extensions making use of settings in an experimental API should practice caution, +potentially unsetting the values when the extension is shutdown. Values used for +the setting could be stored in the extensions locale storage, and restored into +EPM when the extension is started again. -- cgit v1.2.3