From 26a029d407be480d791972afb5975cf62c9360a6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 02:47:55 +0200 Subject: Adding upstream version 124.0.1. Signed-off-by: Daniel Baumann --- xpcom/docs/thread-safety.rst | 354 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 354 insertions(+) create mode 100644 xpcom/docs/thread-safety.rst (limited to 'xpcom/docs/thread-safety.rst') diff --git a/xpcom/docs/thread-safety.rst b/xpcom/docs/thread-safety.rst new file mode 100644 index 0000000000..be2f156804 --- /dev/null +++ b/xpcom/docs/thread-safety.rst @@ -0,0 +1,354 @@ +**Thread safety analysis in Gecko** +=================================== + +Clang thread-safety analysis is supported in Gecko. This means +builds will generate warnings when static analysis detects an issue with +locking of mutex/monitor-protected members and data structures. Note +that Chrome uses the same feature. An example warning: :: + + warning: dom/media/AudioStream.cpp:504:22 [-Wthread-safety-analysis] + reading variable 'mDataSource' requires holding mutex 'mMonitor' + +If your patch causes warnings like this, you’ll need to resolve them; +they will be errors on checkin. + +This analysis depends on thread-safety attributions in the source. These +have been added to Mozilla’s Mutex and Monitor classes and subclasses, +but in practice the analysis is largely dependent on additions to the +code being checked, in particular adding MOZ_GUARDED_BY(mutex) attributions +on the definitions of member variables. Like this: :: + + mozilla::Mutex mLock; + bool mShutdown MOZ_GUARDED_BY(mLock); + +For background on Clang’s thread-safety support, see `their +documentation `__. + +Newly added Mutexes and Monitors **MUST** use thread-safety annotations, +and we are enabling static checks to verify this. Legacy uses of Mutexes +and Monitors are marked with MOZ_UNANNOTATED. + +If you’re modifying code that has been annotated with +MOZ_GUARDED_BY()/MOZ_REQUIRES()/etc, you should **make sure that the annotations +are updated properly**; e.g. if you change the thread-usage of a member +variable or method you should mark it accordingly, comment, and resolve +any warnings. Since the warnings will be errors in autoland/m-c, you +won’t be able to land code with active warnings. + +**Annotating locking and usage requirements in class definitions** +------------------------------------------------------------------ + +Values that require a lock to access, or which are simply used from more +than one thread, should always have documentation in the definition +about the locking requirements and/or what threads it’s touched from: :: + + // This array is accessed from both the direct video thread, and the graph + // thread. Protected by mMutex. + + nsTArray> mFrames + MOZ_GUARDED_BY(mMutex); + + // Set on MainThread, deleted on either MainThread mainthread, used on + // MainThread or IO Thread in DoStopSession + nsCOMPtr mReconnectDelayTimer MOZ_GUARDED_BY(mMutex); + +It’s strongly recommended to group values by access pattern, but it’s +**critical** to make it clear what the requirements to access a value +are. With values protected by Mutexes and Monitors, adding a +MOZ_GUARDED_BY(mutex/monitor) should be sufficient, though you may want to +also document what threads access it, and if they read or write to it. + +Values which have more complex access requirements (see single-writer +and time-based-locking below) need clear documentation where they’re +defined: :: + + MutexSingleWriter mMutex; + + // mResource should only be modified on the main thread with the lock. + // So it can be read without lock on the main thread or on other threads + // with the lock. + RefPtr mResource MOZ_GUARDED_BY(mMutex); + +**WARNING:** thread-safety analysis is not magic; it depends on you telling +it the requirements around access. If you don’t mark something as +MOZ_GUARDED_BY() it won’t figure it out for you, and you can end up with a data +race. When writing multithreaded code, you should always be thinking about +which threads can access what and when, and document this. + +**How to annotate different locking patterns in Gecko** +------------------------------------------------------- + +Gecko uses a number of different locking patterns. They include: + +- **Always Lock** - + Multiple threads may read and write the value + +- **Single Writer** - + One thread does all the writing, other threads + read the value, but code on the writing thread also reads it + without the lock + +- **Out-of-band invariants** - + A value may be accessed from other threads, + but only after or before certain other events or in a certain state, + like when after a listener has been added or before a processing + thread has been shut down. + +The simplest and easiest to check with static analysis is **Always +Lock**, and generally you should prefer this pattern. This is very +simple; you add MOZ_GUARDED_BY(mutex/monitor), and must own the lock to +access the value. This can be implemented by some combination of direct +Lock/AutoLock calls in the method; an assertion that the lock is already +held by the current thread, or annotating the method as requiring the +lock (MOZ_REQUIRES(mutex)) in the method definition: :: + + // Ensures mSize is initialized, if it can be. + // mLock must be held when this is called, and mInput must be non-null. + void EnsureSizeInitialized() MOZ_REQUIRES(mLock); + ... + // This lock protects mSeekable, mInput, mSize, and mSizeInitialized. + Mutex mLock; + int64_t mSize MOZ_GUARDED_BY(mLock); + +**Single Writer** is tricky for static analysis normally, since it +doesn’t know what thread an access will occur on. In general, you should +prefer using Always Lock in non-performance-sensitive code, especially +since these mutexes are almost always uncontended and therefore cheap to +lock. + +To support this fairly common pattern in Mozilla code, we’ve added +MutexSingleWriter and MonitorSingleWriter subclasses. To use these, you +need to subclass SingleWriterLockOwner on one object (typically the +object containing the Mutex), implement ::OnWritingThread(), and pass +the object to the constructor for MutexSingleWriter. In code that +accesses the guarded value from the writing thread, you need to add +mMutex.AssertIsOnWritingThread(), which both does a debug-only runtime +assertion by calling OnWritingThread(), and also asserts to the static +analyzer that the lock is held (which it isn’t). + +There is one case this causes problems with: when a method needs to +access the value (without the lock), and then decides to write to the +value from the same method, taking the lock. To the static analyzer, +this looks like a double-lock. Either you will need to add +MOZ_NO_THREAD_SAFETY_ANALYSIS to the method, move the write into another +method you call, or locally disable the warning with +MOZ_PUSH_IGNORE_THREAD_SAFETY and MOZ_POP_THREAD_SAFETY. We’re discussing with +the clang static analysis developers how to better handle this. + +Note also that this provides no checking that the lock is taken to write +to the value: :: + + MutexSingleWriter mMutex; + // mResource should only be modified on the main thread with the lock. + // So it can be read without lock on the main thread or on other threads + // with the lock. + RefPtr mResource MOZ_GUARDED_BY(mMutex); + ... + nsresult ChannelMediaResource::Listener::OnStartRequest(nsIRequest *aRequest) { + mMutex.AssertOnWritingThread(); + + // Read from the only writing thread; no lock needed + if (!mResource) { + return NS_OK; + } + return mResource->OnStartRequest(aRequest, mOffset); + } + +If you need to assert you’re on the writing thread, then later take a +lock to modify a value, it will cause a warning: ”acquiring mutex +'mMutex' that is already held”. You can resolve this by turning off +thread-safety analysis for the lock: :: + + mMutex.AssertOnWritingThread(); + ... + { + MOZ_PUSH_IGNORE_THREAD_SAFETY + MutexSingleWriterAutoLock lock(mMutex); + MOZ_POP_THREAD_SAFETY + +**Out-of-band Invariants** is used in a number of places (and may be +combined with either of the above patterns). It's using other knowledge +about the execution pattern of the code to assert that it's safe to avoid +taking certain locks. A primary example is when a value can +only be accessed from a single thread for part of its lifetime (this can +also be referred to as "time-based locking"). + +Note that thread-safety analysis always ignores constructors and destructors +(which shouldn’t have races with other threads barring really odd usages). +Since only a single thread can access during those time periods, locking is +not required there. However, if a method is called from a constructor, +that method may generate warnings since the compiler doesn't know if it +might be called from elsewhere: :: + + ... + class nsFoo { + public: + nsFoo() { + mBar = true; // Ok since we're in the constructor, no warning + Init(); + } + void Init() { // we're only called from the constructor + // This causes a thread-safety warning, since the compiler + // can't prove that Init() is only called from the constructor + mQuerty = true; + } + ... + mMutex mMutex; + uint32_t mBar MOZ_GUARDED_BY(mMutex); + uint32_t mQuerty MOZ_GUARDED_BY(mMutex); + } + +Another example might be a value that’s used from other threads, but only +if an observer has been installed. Thus code that always runs before the +observer is installed, or after it’s removed, does not need to lock. + +These patterns are impossible to statically check in most cases. If all +the periods where it’s accessed from one thread only are on the same +thread, you could use the Single Writer pattern support to cover this +case. You would add AssertIsOnWritingThread() calls to methods that meet +the criteria that only a single thread can access the value (but only if +that holds). Unlike regular uses of SingleWriter, however, there’s no way +to check if you added such an assertion to code that runs on the “right” +thread, but during a period where another thread might modify it. + +For this reason, we **strongly** suggest that you convert cases of +Out-of-band-invariants/Time-based-locking to Always Lock if you’re +refactoring the code or making major modifications. This is far less prone +to error, and also to future changes breaking the assumptions about other +threads accessing the value. In all but a few cases where code is on a very +‘hot’ path, this will have no impact on performance - taking an uncontended +lock is cheap. + +To quiet warnings where these patterns are in use, you'll need to either +add locks (preferred), or suppress the warnings with MOZ_NO_THREAD_SAFETY_ANALYSIS or +MOZ_PUSH_IGNORE_THREAD_SAFETY/MOZ_POP_THREAD_SAFETY. + +**This pattern especially needs good documentation in the code as to what +threads will access what members under what conditions!**:: + + // Can't be accessed by multiple threads yet + nsresult nsAsyncStreamCopier::InitInternal(nsIInputStream* source, + nsIOutputStream* sink, + nsIEventTarget* target, + uint32_t chunkSize, + bool closeSource, + bool closeSink) + MOZ_NO_THREAD_SAFETY_ANALYSIS { + +and:: + + // We can't be accessed by another thread because this hasn't been + // added to the public list yet + MOZ_PUSH_IGNORE_THREAD_SAFETY + mRestrictedPortList.AppendElement(gBadPortList[i]); + MOZ_POP_THREAD_SAFETY + +and:: + + // This is called on entries in another entry's mCallback array, under the lock + // of that other entry. No other threads can access this entry at this time. + bool CacheEntry::Callback::DeferDoom(bool* aDoom) const { + +**Known limitations** +--------------------- + +**Static analysis can’t handle all reasonable patterns.** In particular, +per their documentation, it can’t handle conditional locks, like: :: + + if (OnMainThread()) { + mMutex.Lock(); + } + +You should resolve this either via MOZ_NO_THREAD_SAFETY_ANALYSIS on the +method, or MOZ_PUSH_IGNORE_THREAD_SAFETY/MOZ_POP_THREAD_SAFETY. + +**Sometimes the analyzer can’t figure out that two objects are both the +same Mutex**, and it will warn you. You may be able to resolve this by +making sure you’re using the same pattern to access the mutex: :: + + mChan->mMonitor->AssertCurrentThreadOwns(); + ... + { + - MonitorAutoUnlock guard(*monitor); + + MonitorAutoUnlock guard(*(mChan->mMonitor.get())); // avoids mutex warning + ok = node->SendUserMessage(port, std::move(aMessage)); + } + +**Maybe** doesn’t tell the static analyzer when the mutex +is owned or freed; follow locking via the MayBe<> by +**mutex->AssertCurrentThreadOwns();** (and ditto for Monitors): :: + + Maybe lock(std::in_place, *mMonitor); + mMonitor->AssertCurrentThreadOwns(); // for threadsafety analysis + +If you reset() the Maybe<>, you may need to surround it with +MOZ_PUSH_IGNORE_THREAD_SAFETY and MOZ_POP_THREAD_SAFETY macros: :: + + MOZ_PUSH_IGNORE_THREAD_SAFETY + aLock.reset(); + MOZ_POP_THREAD_SAFETY + +**Passing a protected value by-reference** sometimes will confuse the +analyzer. Use MOZ_PUSH_IGNORE_THREAD_SAFETY and MOZ_POP_THREAD_SAFETY macros to +resolve this. + +**Classes which need thread-safety annotations** +------------------------------------------------ + +- Mutex + +- StaticMutex + +- RecursiveMutex + +- BaseProfilerMutex + +- Monitor + +- StaticMonitor + +- ReentrantMonitor + +- RWLock + +- Anything that hides an internal Mutex/etc and presents a Mutex-like + API (::Lock(), etc). + +**Additional Notes** +-------------------- + +Some code passes **Proof-of-Lock** AutoLock parameters, as a poor form of +static analysis. While it’s hard to make mistakes if you pass an AutoLock +reference, it is possible to pass a lock to the wrong Mutex/Monitor. + +Proof-of-lock is basically redundant to MOZ_REQUIRES() and obsolete, and +depends on the optimizer to remove it, and per above it can be misused, +with effort. With MOZ_REQUIRES(), any proof-of-lock parameters can be removed, +though you don't have to do so immediately. + +In any method taking an aProofOfLock parameter, add a MOZ_REQUIRES(mutex) to +the definition (and optionally remove the proof-of-lock), or add a +mMutex.AssertCurrentThreadOwns() to the method: :: + + nsresult DispatchLockHeld(already_AddRefed aRunnable, + - nsIEventTarget* aSyncLoopTarget, + - const MutexAutoLock& aProofOfLock); + + nsIEventTarget* aSyncLoopTarget) MOZ_REQUIRES(mMutex); + +or (if for some reason it's hard to specify the mutex in the header):: + + nsresult DispatchLockHeld(already_AddRefed aRunnable, + - nsIEventTarget* aSyncLoopTarget, + - const MutexAutoLock& aProofOfLock); + + nsIEventTarget* aSyncLoopTarget) { + + mMutex.AssertCurrentThreadOwns(); + +In addition to MOZ_GUARDED_BY() there’s also MOZ_PT_GUARDED_BY(), which says +that the pointer isn’t guarded, but the data pointed to by the pointer +is. + +Classes that expose a Mutex-like interface can be annotated like Mutex; +see some of the examples in the tree that use MOZ_CAPABILITY and +MOZ_ACQUIRE()/MOZ_RELEASE(). + +Shared locks are supported, though we don’t use them much. See RWLock. -- cgit v1.2.3