/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* vim: set ts=8 sts=2 et sw=2 tw=80: */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include "nsPageFrame.h" #include "mozilla/AppUnits.h" #include "mozilla/PresShell.h" #include "mozilla/StaticPrefs_layout.h" #include "mozilla/gfx/2D.h" #include "mozilla/intl/Segmenter.h" #include "gfxContext.h" #include "nsDeviceContext.h" #include "nsFontMetrics.h" #include "nsIFrame.h" #include "nsLayoutUtils.h" #include "nsPresContext.h" #include "nsGkAtoms.h" #include "nsFieldSetFrame.h" #include "nsPageContentFrame.h" #include "nsDisplayList.h" #include "nsPageSequenceFrame.h" // for nsSharedPageData #include "nsTextFormatter.h" // for page number localization formatting #include "nsBidiUtils.h" #include "nsIPrintSettings.h" #include "PrintedSheetFrame.h" #include "mozilla/Logging.h" extern mozilla::LazyLogModule gLayoutPrintingLog; #define PR_PL(_p1) MOZ_LOG(gLayoutPrintingLog, mozilla::LogLevel::Debug, _p1) using namespace mozilla; using namespace mozilla::gfx; nsPageFrame* NS_NewPageFrame(PresShell* aPresShell, ComputedStyle* aStyle) { return new (aPresShell) nsPageFrame(aStyle, aPresShell->GetPresContext()); } NS_IMPL_FRAMEARENA_HELPERS(nsPageFrame) NS_QUERYFRAME_HEAD(nsPageFrame) NS_QUERYFRAME_ENTRY(nsPageFrame) NS_QUERYFRAME_TAIL_INHERITING(nsContainerFrame) nsPageFrame::nsPageFrame(ComputedStyle* aStyle, nsPresContext* aPresContext) : nsContainerFrame(aStyle, aPresContext, kClassID) {} nsPageFrame::~nsPageFrame() = default; nsReflowStatus nsPageFrame::ReflowPageContent( nsPresContext* aPresContext, const ReflowInput& aPageReflowInput) { nsPageContentFrame* const frame = PageContentFrame(); // If this is the first page, it won't have its page name and computed style // set yet. Before reflow, make sure that page name and computed style have // been applied. frame->EnsurePageName(); // XXX Pay attention to the page's border and padding... // // Reflow our ::-moz-page-content frame, allowing it only to be as big as we // are (minus margins). const nsSize pageSize = ComputePageSize(); // Scaling applied to the page in the single page-per-sheet case (used for // down-scaling when the page is too large to fit on the sheet we are printing // on). In the single page-per-sheet case, we need this here to preemptively // increase the margins by the same amount that the scaling will reduce them // in order to make sure that their physical size is unchanged (particularly // important for the unwriteable margins). const auto* ppsInfo = GetSharedPageData()->PagesPerSheetInfo(); const float pageSizeScale = ppsInfo->mNumPages == 1 ? ComputeSinglePPSPageSizeScale(pageSize) : 1.0f; // Scaling applied to content, as given by the print UI. // This is an additional scale factor that is applied to the content in the // nsPageContentFrame. const float extraContentScale = aPresContext->GetPageScale(); // Size for the page content. This will be scaled by extraContentScale, and // is used to calculate the computed size of the nsPageContentFrame content // by subtracting margins. nsSize availableSpace = pageSize; // When the reflow size is NS_UNCONSTRAINEDSIZE it means we are reflowing // a single page to print selection. So this means we want to use // NS_UNCONSTRAINEDSIZE without altering it. // // FIXME(emilio): Is this still true? availableSpace.width = NSToCoordCeil(availableSpace.width / extraContentScale); if (availableSpace.height != NS_UNCONSTRAINEDSIZE) { availableSpace.height = NSToCoordCeil(availableSpace.height / extraContentScale); } // Get the number of Twips per pixel from the PresContext const nscoord onePixel = AppUnitsPerCSSPixel(); // insurance against infinite reflow, when reflowing less than a pixel // XXX Shouldn't we do something more friendly when invalid margins // are set? if (availableSpace.width < onePixel || availableSpace.height < onePixel) { NS_WARNING("Reflow aborted; no space for content"); return {}; } ReflowInput kidReflowInput( aPresContext, aPageReflowInput, frame, LogicalSize(frame->GetWritingMode(), availableSpace)); kidReflowInput.mFlags.mIsTopOfPage = true; kidReflowInput.mFlags.mTableIsSplittable = true; nsMargin defaultMargins = aPresContext->GetDefaultPageMargin(); // The default margins are in the coordinate space of the physical paper. // Scale them by the pageSizeScale to convert them to the content coordinate // space. for (const auto side : mozilla::AllPhysicalSides()) { defaultMargins.Side(side) = NSToCoordRound((float)defaultMargins.Side(side) / pageSizeScale); } mPageContentMargin = defaultMargins; // Use the margins given in the @page rule if told to do so. // We clamp to the paper's unwriteable margins to avoid clipping, *except* // that we will respect a margin of zero if specified, assuming this means // the document is intended to fit the paper size exactly, and the client is // taking full responsibility for what happens around the edges. if (mPD->mPrintSettings->GetHonorPageRuleMargins()) { const auto& margin = kidReflowInput.mStyleMargin->mMargin; for (const auto side : mozilla::AllPhysicalSides()) { if (!margin.Get(side).IsAuto()) { // Computed margins are already in the coordinate space of the content, // do not scale. const nscoord computed = kidReflowInput.ComputedPhysicalMargin().Side(side); // Respecting a zero margin is particularly important when the client // is PDF.js where the PDF already contains the margins. // User could also be asking to ignore unwriteable margins (Though // currently, it is impossible through the print UI to set both // `HonorPageRuleMargins` and `IgnoreUnwriteableMargins`). if (computed == 0 || mPD->mPrintSettings->GetIgnoreUnwriteableMargins()) { mPageContentMargin.Side(side) = computed; } else { // Unwriteable margins are in the coordinate space of the physical // paper. Scale them by the pageSizeScale to convert them to the // content coordinate space. const int32_t unwriteableTwips = mPD->mPrintSettings->GetUnwriteableMarginInTwips().Side(side); const nscoord unwriteable = nsPresContext::CSSTwipsToAppUnits( (float)unwriteableTwips / pageSizeScale); mPageContentMargin.Side(side) = std::max( kidReflowInput.ComputedPhysicalMargin().Side(side), unwriteable); } } } } // TODO: This seems odd that we need to scale the margins by the extra // scale factor, but this is needed for correct margins. // Why are the margins already scaled? Shouldn't they be stored so that this // scaling factor would be redundant? nscoord computedWidth = availableSpace.width - mPageContentMargin.LeftRight() / extraContentScale; nscoord computedHeight; if (availableSpace.height == NS_UNCONSTRAINEDSIZE) { computedHeight = NS_UNCONSTRAINEDSIZE; } else { computedHeight = availableSpace.height - mPageContentMargin.TopBottom() / extraContentScale; } // Check the width and height, if they're too small we reset the margins // back to the default. if (computedWidth < onePixel || computedHeight < onePixel) { mPageContentMargin = defaultMargins; computedWidth = availableSpace.width - mPageContentMargin.LeftRight() / extraContentScale; if (computedHeight != NS_UNCONSTRAINEDSIZE) { computedHeight = availableSpace.height - mPageContentMargin.TopBottom() / extraContentScale; } // And if they're still too small, we give up. if (computedWidth < onePixel || computedHeight < onePixel) { NS_WARNING("Reflow aborted; no space for content"); return {}; } } kidReflowInput.SetComputedWidth(computedWidth); kidReflowInput.SetComputedHeight(computedHeight); // calc location of frame const nscoord xc = mPageContentMargin.left; const nscoord yc = mPageContentMargin.top; // Get the child's desired size ReflowOutput kidOutput(kidReflowInput); nsReflowStatus kidStatus; ReflowChild(frame, aPresContext, kidOutput, kidReflowInput, xc, yc, ReflowChildFlags::Default, kidStatus); // Place and size the child FinishReflowChild(frame, aPresContext, kidOutput, &kidReflowInput, xc, yc, ReflowChildFlags::Default); NS_ASSERTION(!kidStatus.IsFullyComplete() || !frame->GetNextInFlow(), "bad child flow list"); return kidStatus; } void nsPageFrame::Reflow(nsPresContext* aPresContext, ReflowOutput& aReflowOutput, const ReflowInput& aReflowInput, nsReflowStatus& aStatus) { MarkInReflow(); DO_GLOBAL_REFLOW_COUNT("nsPageFrame"); DISPLAY_REFLOW(aPresContext, this, aReflowInput, aReflowOutput, aStatus); MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!"); MOZ_ASSERT(mPD, "Need a pointer to nsSharedPageData before reflow starts"); // Our status is the same as our child's. aStatus = ReflowPageContent(aPresContext, aReflowInput); PR_PL(("PageFrame::Reflow %p ", this)); PR_PL(("[%d,%d][%d,%d]\n", aReflowOutput.Width(), aReflowOutput.Height(), aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight())); // Return our desired size WritingMode wm = aReflowInput.GetWritingMode(); aReflowOutput.ISize(wm) = aReflowInput.AvailableISize(); if (aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE) { aReflowOutput.BSize(wm) = aReflowInput.AvailableBSize(); } aReflowOutput.SetOverflowAreasToDesiredBounds(); FinishAndStoreOverflow(&aReflowOutput); PR_PL(("PageFrame::Reflow %p ", this)); PR_PL(("[%d,%d]\n", aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight())); } #ifdef DEBUG_FRAME_DUMP nsresult nsPageFrame::GetFrameName(nsAString& aResult) const { return MakeFrameName(u"Page"_ns, aResult); } #endif void nsPageFrame::ProcessSpecialCodes(const nsString& aStr, nsString& aNewStr) { aNewStr = aStr; // Search to see if the &D code is in the string // then subst in the current date/time constexpr auto kDate = u"&D"_ns; if (aStr.Find(kDate) != kNotFound) { aNewStr.ReplaceSubstring(kDate, mPD->mDateTimeStr); } // NOTE: Must search for &PT before searching for &P // // Search to see if the "page number and page" total code are in the string // and replace the page number and page total code with the actual // values constexpr auto kPageAndTotal = u"&PT"_ns; if (aStr.Find(kPageAndTotal) != kNotFound) { nsAutoString uStr; nsTextFormatter::ssprintf(uStr, mPD->mPageNumAndTotalsFormat.get(), mPageNum, mPD->mRawNumPages); aNewStr.ReplaceSubstring(kPageAndTotal, uStr); } // Search to see if the page number code is in the string // and replace the page number code with the actual value constexpr auto kPage = u"&P"_ns; if (aStr.Find(kPage) != kNotFound) { nsAutoString uStr; nsTextFormatter::ssprintf(uStr, mPD->mPageNumFormat.get(), mPageNum); aNewStr.ReplaceSubstring(kPage, uStr); } constexpr auto kTitle = u"&T"_ns; if (aStr.Find(kTitle) != kNotFound) { aNewStr.ReplaceSubstring(kTitle, mPD->mDocTitle); } constexpr auto kDocURL = u"&U"_ns; if (aStr.Find(kDocURL) != kNotFound) { aNewStr.ReplaceSubstring(kDocURL, mPD->mDocURL); } constexpr auto kPageTotal = u"&L"_ns; if (aStr.Find(kPageTotal) != kNotFound) { nsAutoString uStr; nsTextFormatter::ssprintf(uStr, mPD->mPageNumFormat.get(), mPD->mRawNumPages); aNewStr.ReplaceSubstring(kPageTotal, uStr); } } //------------------------------------------------------------------------------ nscoord nsPageFrame::GetXPosition(gfxContext& aRenderingContext, nsFontMetrics& aFontMetrics, const nsRect& aRect, int32_t aJust, const nsString& aStr) { nscoord width = nsLayoutUtils::AppUnitWidthOfStringBidi( aStr, this, aFontMetrics, aRenderingContext); nscoord x = aRect.x; switch (aJust) { case nsIPrintSettings::kJustLeft: x += mPD->mEdgePaperMargin.left; break; case nsIPrintSettings::kJustCenter: x += (aRect.width - width) / 2; break; case nsIPrintSettings::kJustRight: x += aRect.width - width - mPD->mEdgePaperMargin.right; break; } // switch return x; } // Draw a header or footer // @param aRenderingContext - rendering content to draw into // @param aHeaderFooter - indicates whether it is a header or footer // @param aStrLeft - string for the left header or footer; can be empty // @param aStrCenter - string for the center header or footer; can be empty // @param aStrRight - string for the right header or footer; can be empty // @param aRect - the rect of the page // @param aAscent - the ascent of the font // @param aHeight - the height of the font void nsPageFrame::DrawHeaderFooter( gfxContext& aRenderingContext, nsFontMetrics& aFontMetrics, nsHeaderFooterEnum aHeaderFooter, const nsString& aStrLeft, const nsString& aStrCenter, const nsString& aStrRight, const nsRect& aRect, nscoord aAscent, nscoord aHeight) { int32_t numStrs = 0; if (!aStrLeft.IsEmpty()) numStrs++; if (!aStrCenter.IsEmpty()) numStrs++; if (!aStrRight.IsEmpty()) numStrs++; if (numStrs == 0) return; const nscoord contentWidth = aRect.width - (mPD->mEdgePaperMargin.left + mPD->mEdgePaperMargin.right); const nscoord strSpace = contentWidth / numStrs; if (!aStrLeft.IsEmpty()) { DrawHeaderFooter(aRenderingContext, aFontMetrics, aHeaderFooter, nsIPrintSettings::kJustLeft, aStrLeft, aRect, aAscent, aHeight, strSpace); } if (!aStrCenter.IsEmpty()) { DrawHeaderFooter(aRenderingContext, aFontMetrics, aHeaderFooter, nsIPrintSettings::kJustCenter, aStrCenter, aRect, aAscent, aHeight, strSpace); } if (!aStrRight.IsEmpty()) { DrawHeaderFooter(aRenderingContext, aFontMetrics, aHeaderFooter, nsIPrintSettings::kJustRight, aStrRight, aRect, aAscent, aHeight, strSpace); } } // Draw a header or footer string // @param aRenderingContext - rendering context to draw into // @param aHeaderFooter - indicates whether it is a header or footer // @param aJust - indicates where the string is located within the header/footer // @param aStr - the string to be drawn // @param aRect - the rect of the page // @param aHeight - the height of the font // @param aAscent - the ascent of the font // @param aWidth - available width for the string void nsPageFrame::DrawHeaderFooter(gfxContext& aRenderingContext, nsFontMetrics& aFontMetrics, nsHeaderFooterEnum aHeaderFooter, int32_t aJust, const nsString& aStr, const nsRect& aRect, nscoord aAscent, nscoord aHeight, nscoord aWidth) { DrawTarget* drawTarget = aRenderingContext.GetDrawTarget(); if ((aHeaderFooter == eHeader && aHeight < mPageContentMargin.top) || (aHeaderFooter == eFooter && aHeight < mPageContentMargin.bottom)) { nsAutoString str; ProcessSpecialCodes(aStr, str); int32_t len = (int32_t)str.Length(); if (len == 0) { return; // bail is empty string } int32_t index; int32_t textWidth = 0; const char16_t* text = str.get(); // find how much text fits, the "position" is the size of the available area if (nsLayoutUtils::BinarySearchForPosition(drawTarget, aFontMetrics, text, 0, 0, 0, len, int32_t(aWidth), index, textWidth)) { if (index < len - 1) { // we can't fit in all the text, try to remove 3 glyphs and append // three "." charactrers. // TODO: This might not actually remove three glyphs in cases where // ZWJ sequences, regional indicators, etc are used. // We also have guarantee that removing three glyphs will make enough // space for the ellipse, if they are zero-width or even just narrower // than the "." character. // See https://bugzilla.mozilla.org/1765008 mozilla::intl::GraphemeClusterBreakReverseIteratorUtf16 revIter(str); // Start iteration at the point where the text does properly fit. revIter.Seek(index); // Step backwards 3 times, checking if we have any string left by the // end. revIter.Next(); revIter.Next(); if (const Maybe maybeIndex = revIter.Next()) { // TODO: We should consider checking for the ellipse character, or // possibly for another continuation indicator based on // localization. // See https://bugzilla.mozilla.org/1765007 str.Truncate(*maybeIndex); str.AppendLiteral("..."); } else { // We can only fit 3 or fewer chars. Just show nothing str.Truncate(); } } } else { return; // bail if couldn't find the correct length } if (HasRTLChars(str)) { PresContext()->SetBidiEnabled(); } // calc the x and y positions of the text nscoord x = GetXPosition(aRenderingContext, aFontMetrics, aRect, aJust, str); nscoord y; if (aHeaderFooter == eHeader) { y = aRect.y + mPD->mEdgePaperMargin.top; } else { y = aRect.YMost() - aHeight - mPD->mEdgePaperMargin.bottom; } // set up new clip and draw the text aRenderingContext.Save(); aRenderingContext.Clip(NSRectToSnappedRect( aRect, PresContext()->AppUnitsPerDevPixel(), *drawTarget)); aRenderingContext.SetColor(sRGBColor::OpaqueBlack()); nsLayoutUtils::DrawString(this, aFontMetrics, &aRenderingContext, str.get(), str.Length(), nsPoint(x, y + aAscent), nullptr, DrawStringFlags::ForceHorizontal); aRenderingContext.Restore(); } } class nsDisplayHeaderFooter final : public nsPaintedDisplayItem { public: nsDisplayHeaderFooter(nsDisplayListBuilder* aBuilder, nsPageFrame* aFrame) : nsPaintedDisplayItem(aBuilder, aFrame) { MOZ_COUNT_CTOR(nsDisplayHeaderFooter); } MOZ_COUNTED_DTOR_OVERRIDE(nsDisplayHeaderFooter) virtual void Paint(nsDisplayListBuilder* aBuilder, gfxContext* aCtx) override { #ifdef DEBUG nsPageFrame* pageFrame = do_QueryFrame(mFrame); MOZ_ASSERT(pageFrame, "We should have an nsPageFrame"); #endif static_cast(mFrame)->PaintHeaderFooter( *aCtx, ToReferenceFrame(), false); } NS_DISPLAY_DECL_NAME("HeaderFooter", TYPE_HEADER_FOOTER) virtual nsRect GetComponentAlphaBounds( nsDisplayListBuilder* aBuilder) const override { bool snap; return GetBounds(aBuilder, &snap); } }; static void PaintMarginGuides(nsIFrame* aFrame, DrawTarget* aDrawTarget, const nsRect& aDirtyRect, nsPoint aPt) { // Set up parameters needed to draw the guides: we draw them in blue, // using 2px-long dashes with 2px separation and a line width of 0.5px. // Drawing is antialiased, so on a non-hidpi screen where the line width is // less than one device pixel, it doesn't disappear but renders fainter // than a solid 1px-wide line would be. // (In many cases, the entire preview is scaled down so that the guides // will be nominally less than 1 dev px even on a hidpi screen, resulting // in lighter antialiased rendering so they don't dominate the page.) ColorPattern pattern(ToDeviceColor(sRGBColor(0.0f, 0.0f, 1.0f))); Float dashes[] = {2.0f, 2.0f}; StrokeOptions stroke(/* line width (in CSS px) */ 0.5f, JoinStyle::MITER_OR_BEVEL, CapStyle::BUTT, /* mitre limit (default, not used) */ 10.0f, /* set dash pattern of 2px stroke, 2px gap */ ArrayLength(dashes), dashes, /* dash offset */ 0.0f); DrawOptions options; MOZ_RELEASE_ASSERT(aFrame->IsPageFrame()); const nsMargin& margin = static_cast(aFrame)->GetUsedPageContentMargin(); int32_t appUnitsPerDevPx = aFrame->PresContext()->AppUnitsPerDevPixel(); // Get the frame's rect and inset by the margins to get the edges of the // content area, where we want to draw the guides. // We draw in two stages, first applying the top/bottom margins and drawing // the horizontal guides across the full width of the page. nsRect rect(aPt, aFrame->GetSize()); rect.Deflate(nsMargin(margin.top, 0, margin.bottom, 0)); Rect r = NSRectToRect(rect, appUnitsPerDevPx); aDrawTarget->StrokeLine(r.TopLeft(), r.TopRight(), pattern, stroke, options); aDrawTarget->StrokeLine(r.BottomLeft(), r.BottomRight(), pattern, stroke, options); // Then reset rect, apply the left/right margins, and draw vertical guides // extending the full height of the page. rect = nsRect(aPt, aFrame->GetSize()); rect.Deflate(nsMargin(0, margin.right, 0, margin.left)); r = NSRectToRect(rect, appUnitsPerDevPx); aDrawTarget->StrokeLine(r.TopLeft(), r.BottomLeft(), pattern, stroke, options); aDrawTarget->StrokeLine(r.TopRight(), r.BottomRight(), pattern, stroke, options); } static std::tuple GetRowAndColFromIdx(uint32_t aIdxOnSheet, uint32_t aNumCols) { // Compute the row index by *dividing* the item's ordinal position by how // many items fit in each row (i.e. the number of columns), and flooring. // Compute the column index by getting the remainder of that division: // Notably, mNumRows is irrelevant to this computation; that's because // we're adding new items column-by-column rather than row-by-row. return {aIdxOnSheet / aNumCols, aIdxOnSheet % aNumCols}; } // Helper for BuildDisplayList: static gfx::Matrix4x4 ComputePagesPerSheetAndPageSizeTransform( const nsIFrame* aFrame, float aAppUnitsPerPixel) { MOZ_ASSERT(aFrame->IsPageFrame()); auto* pageFrame = static_cast(aFrame); const nsSize contentPageSize = pageFrame->ComputePageSize(); MOZ_ASSERT(contentPageSize.width > 0 && contentPageSize.height > 0); nsSharedPageData* pd = pageFrame->GetSharedPageData(); const auto* ppsInfo = pd->PagesPerSheetInfo(); const nsContainerFrame* const parentFrame = pageFrame->GetParent(); MOZ_ASSERT(parentFrame->IsPrintedSheetFrame(), "Parent of nsPageFrame should be PrintedSheetFrame"); const auto* sheetFrame = static_cast(parentFrame); const double rotation = pageFrame->GetPageOrientationRotation(pageFrame->GetSharedPageData()); gfx::Matrix4x4 transform; if (ppsInfo->mNumPages == 1) { if (rotation != 0.0) { const nsSize sheetSize = sheetFrame->GetSizeForChildren(); const bool sheetIsPortrait = sheetSize.width < sheetSize.height; const bool rotatingClockwise = rotation > 0.0; // rotation point: int32_t x, y; if (rotatingClockwise != sheetIsPortrait) { // rotating portrait clockwise, or landscape counterclockwise x = y = std::min(sheetSize.width, sheetSize.height) / 2; } else { // rotating portrait counterclockwise, or landscape clockwise x = y = std::max(sheetSize.width, sheetSize.height) / 2; } transform = gfx::Matrix4x4::Translation( NSAppUnitsToFloatPixels(x, aAppUnitsPerPixel), NSAppUnitsToFloatPixels(y, aAppUnitsPerPixel), 0); transform.RotateZ(rotation); transform.PreTranslate(NSAppUnitsToFloatPixels(-x, aAppUnitsPerPixel), NSAppUnitsToFloatPixels(-y, aAppUnitsPerPixel), 0); } float scale = pageFrame->ComputeSinglePPSPageSizeScale(contentPageSize); transform.PreScale(scale, scale, 1); return transform; } // The multiple pages-per-sheet case. // Begin with the translation of the page to its pages-per-sheet grid "cell" // (the grid origin accounts for the sheet's unwriteable margins): const nsPoint gridOrigin = sheetFrame->GetGridOrigin(); const nscoord cellWidth = sheetFrame->GetGridCellWidth(); const nscoord cellHeight = sheetFrame->GetGridCellHeight(); uint32_t rowIdx, colIdx; std::tie(rowIdx, colIdx) = GetRowAndColFromIdx(pageFrame->IndexOnSheet(), sheetFrame->GetGridNumCols()); transform = gfx::Matrix4x4::Translation( NSAppUnitsToFloatPixels(gridOrigin.x + nscoord(colIdx) * cellWidth, aAppUnitsPerPixel), NSAppUnitsToFloatPixels(gridOrigin.y + nscoord(rowIdx) * cellHeight, aAppUnitsPerPixel), 0.0f); // Scale the page to fit, centered, in the grid cell: float scaleX = float(cellWidth) / float(contentPageSize.width); float scaleY = float(cellHeight) / float(contentPageSize.height); MOZ_ASSERT(scaleX > 0.0f && scaleX <= 1.0f && scaleY > 0.0f && scaleY <= 1.0f); float scale; float dx = 0.0f, dy = 0.0f; if (scaleX < scaleY) { scale = scaleX; // We need to scale down more for the width than the height, so we'll have // some spare space in the page's vertical direction. We offset the page // to share that space equally above and below the page to center it. nscoord extraSpace = cellHeight - NSToCoordRound(float(contentPageSize.height) * scale); dy = NSAppUnitsToFloatPixels(extraSpace / 2, aAppUnitsPerPixel); } else { scale = scaleY; nscoord extraSpace = cellWidth - NSToCoordRound(float(contentPageSize.width) * scale); dx = NSAppUnitsToFloatPixels(extraSpace / 2, aAppUnitsPerPixel); } transform.PreTranslate(dx, dy, 0.0f); transform.PreScale(scale, scale, 1.0f); // Apply 'page-orientation' rotation, if applicable: if (rotation != 0.0) { // We've already translated and scaled the page to fit the cell, ignoring // rotation. Here we rotate the page around its center and, if necessary, // also scale it to fit it to its cell for its orientation change. float fitScale = 1.0f; if (MOZ_LIKELY(cellWidth != cellHeight && contentPageSize.width != contentPageSize.height)) { // If neither the cell nor the page are square, the scale must change. float cellRatio = float(cellWidth) / float(cellHeight); float pageRatio = float(contentPageSize.width) / float(contentPageSize.height); const bool orientationWillMatchAfterRotation = floor(cellRatio) != floor(pageRatio); if (cellRatio > 1.0f) { cellRatio = 1.0f / cellRatio; // normalize } if (pageRatio > 1.0f) { pageRatio = 1.0f / pageRatio; // normalize } fitScale = std::max(cellRatio, pageRatio); if (orientationWillMatchAfterRotation) { // Scale up, not down fitScale = 1.0f / fitScale; } } transform.PreTranslate( NSAppUnitsToFloatPixels(contentPageSize.width / 2, aAppUnitsPerPixel), NSAppUnitsToFloatPixels(contentPageSize.height / 2, aAppUnitsPerPixel), 0); if (MOZ_LIKELY(fitScale != 1.0f)) { transform.PreScale(fitScale, fitScale, 1.0f); } transform.RotateZ(rotation); transform.PreTranslate( NSAppUnitsToFloatPixels(-contentPageSize.width / 2, aAppUnitsPerPixel), NSAppUnitsToFloatPixels(-contentPageSize.height / 2, aAppUnitsPerPixel), 0); } return transform; } nsIFrame::ComputeTransformFunction nsPageFrame::GetTransformGetter() const { return ComputePagesPerSheetAndPageSizeTransform; } nsPageContentFrame* nsPageFrame::PageContentFrame() const { nsIFrame* const frame = mFrames.FirstChild(); MOZ_ASSERT(frame, "pageFrame must have one child"); MOZ_ASSERT(frame->IsPageContentFrame(), "pageFrame must have pageContentFrame as the first child"); return static_cast(frame); } nsSize nsPageFrame::ComputePageSize() const { // Compute the expected page-size. const nsPageFrame* const frame = StaticPrefs::layout_css_allow_mixed_page_sizes() ? this : static_cast(FirstContinuation()); const StylePageSize& pageSize = frame->PageContentFrame()->StylePage()->mSize; nsSize size = PresContext()->GetPageSize(); if (pageSize.IsSize()) { // Use the specified size, // ignoring sizes that include a zero width or height. // These are also ignored in ServoStyleSet::GetPageSizeForPageName() // when getting the paper size. nscoord cssPageWidth = pageSize.AsSize().width.ToAppUnits(); nscoord cssPageHeight = pageSize.AsSize().height.ToAppUnits(); if (cssPageWidth > 0 && cssPageHeight > 0) { return nsSize{cssPageWidth, cssPageHeight}; } // Invalid size; just return the default return size; } if (pageSize.IsOrientation()) { // Ensure the correct orientation is applied. if (pageSize.AsOrientation() == StylePageSizeOrientation::Portrait) { if (size.width > size.height) { std::swap(size.width, size.height); } } else { MOZ_ASSERT(pageSize.AsOrientation() == StylePageSizeOrientation::Landscape); if (size.width < size.height) { std::swap(size.width, size.height); } } } else { MOZ_ASSERT(pageSize.IsAuto(), "Impossible page-size value?"); } return size; } float nsPageFrame::ComputeSinglePPSPageSizeScale( const nsSize aContentPageSize) const { MOZ_ASSERT(GetSharedPageData()->PagesPerSheetInfo()->mNumPages == 1, "Only intended for the pps==1 case"); MOZ_ASSERT(aContentPageSize == ComputePageSize(), "Incorrect content page size"); // Check for the simplest case first, an auto page-size which requires no // scaling at all. { const nsPageFrame* const frame = StaticPrefs::layout_css_allow_mixed_page_sizes() ? this : static_cast(FirstContinuation()); const StylePageSize& pageSize = frame->PageContentFrame()->StylePage()->mSize; if (pageSize.IsAuto()) { return 1.0f; } } const nsContainerFrame* const parent = GetParent(); MOZ_ASSERT(parent && parent->IsPrintedSheetFrame(), "Parent of nsPageFrame should be PrintedSheetFrame"); const auto* sheet = static_cast(parent); // Compute scaling due to a possible mismatch in the paper size we are // printing to (from the pres context) and the specified page size when the // content uses "@page {size: ...}" to specify a page size for the content. float scale = 1.0f; const nsSize sheetSize = sheet->GetSizeForChildren(); nscoord contentPageHeight = aContentPageSize.height; // Scale down if the target is too wide. if (aContentPageSize.width > sheetSize.width) { scale *= float(sheetSize.width) / float(aContentPageSize.width); contentPageHeight = NSToCoordRound(contentPageHeight * scale); } // Scale down if the target is too tall. if (contentPageHeight > sheetSize.height) { scale *= float(sheetSize.height) / float(contentPageHeight); } MOZ_ASSERT( scale <= 1.0f, "Page-size mismatches should only have caused us to scale down, not up."); return scale; } double nsPageFrame::GetPageOrientationRotation(nsSharedPageData* aPD) const { if (!StaticPrefs::layout_css_page_orientation_enabled()) { return 0.0; } if (aPD->PagesPerSheetInfo()->mNumPages == 1 && !PresContext()->IsScreen() && aPD->mPrintSettings->GetOutputFormat() != nsIPrintSettings::kOutputFormatPDF) { // In the single page-per-sheet case we rotate the page by essentially // rotating the entire sheet. But we can't do that when the output device // doesn't support mixed sheet orientations. return 0.0; } const StylePageOrientation& orientation = PageContentFrame()->StylePage()->mPageOrientation; if (orientation == StylePageOrientation::RotateLeft) { return -M_PI / 2.0; } if (orientation == StylePageOrientation::RotateRight) { return M_PI / 2.0; } return 0.0; } void nsPageFrame::BuildDisplayList(nsDisplayListBuilder* aBuilder, const nsDisplayListSet& aLists) { nsDisplayList content(aBuilder); nsDisplayListSet set(&content, &content, &content, &content, &content, &content); { DisplayListClipState::AutoSaveRestore clipState(aBuilder); clipState.Clear(); nsPresContext* const pc = PresContext(); { // We need to extend the building rect to include the specified page size // (scaled by the print scaling factor), in case it is larger than the // physical page size. In that case the nsPageFrame will be the size of // the physical page, but the child nsPageContentFrame will be the larger // specified page size. The more correct way to do this would be to fully // reverse the result of ComputePagesPerSheetAndPageSizeTransform to // handle this scaling, but this should have the same result and is // easier. const float scale = pc->GetPageScale(); const nsSize pageSize = ComputePageSize(); const nsRect scaledPageRect{0, 0, NSToCoordCeil(pageSize.width / scale), NSToCoordCeil(pageSize.height / scale)}; nsDisplayListBuilder::AutoBuildingDisplayList buildingForPageContentFrame( aBuilder, this, scaledPageRect, scaledPageRect); nsContainerFrame::BuildDisplayList(aBuilder, set); } if (pc->IsRootPaginatedDocument()) { content.AppendNewToTop(aBuilder, this); // For print-preview, show margin guides if requested in the settings. if (pc->Type() == nsPresContext::eContext_PrintPreview && mPD->mPrintSettings->GetShowMarginGuides()) { content.AppendNewToTop( aBuilder, this, PaintMarginGuides, "MarginGuides", DisplayItemType::TYPE_MARGIN_GUIDES); } } } // We'll be drawing the page with a (usually-trivial) // N-pages-per-sheet transform applied, so our passed-in visible rect // isn't meaningful while we're drawing our children, because the // transform could scale down content whose coordinates are off-screen // such that it ends up on-screen. So: we temporarily update the visible // rect to be the child nsPageFrame's whole frame-rect (represented in // this PrintedSheetFrame's coordinate space. content.AppendNewToTop( aBuilder, this, &content, content.GetBuildingRect(), nsDisplayTransform::WithTransformGetter); set.MoveTo(aLists); } //------------------------------------------------------------------------------ void nsPageFrame::DeterminePageNum() { // If we have no previous continuation, we're page 1. Otherwise, we're // just one more than our previous continuation's page number. auto* prevContinuation = static_cast(GetPrevContinuation()); mPageNum = prevContinuation ? prevContinuation->GetPageNum() + 1 : 1; } void nsPageFrame::PaintHeaderFooter(gfxContext& aRenderingContext, nsPoint aPt, bool aDisableSubpixelAA) { nsPresContext* pc = PresContext(); nsRect rect(aPt, ComputePageSize()); aRenderingContext.SetColor(sRGBColor::OpaqueBlack()); DrawTargetAutoDisableSubpixelAntialiasing disable( aRenderingContext.GetDrawTarget(), aDisableSubpixelAA); // Get the FontMetrics to determine width.height of strings nsFontMetrics::Params params; params.userFontSet = pc->GetUserFontSet(); params.textPerf = pc->GetTextPerfMetrics(); params.featureValueLookup = pc->GetFontFeatureValuesLookup(); RefPtr fontMet = pc->GetMetricsFor(mPD->mHeadFootFont, params); nscoord ascent = fontMet->MaxAscent(); nscoord visibleHeight = fontMet->MaxHeight(); // print document headers and footers nsString headerLeft, headerCenter, headerRight; mPD->mPrintSettings->GetHeaderStrLeft(headerLeft); mPD->mPrintSettings->GetHeaderStrCenter(headerCenter); mPD->mPrintSettings->GetHeaderStrRight(headerRight); DrawHeaderFooter(aRenderingContext, *fontMet, eHeader, headerLeft, headerCenter, headerRight, rect, ascent, visibleHeight); nsString footerLeft, footerCenter, footerRight; mPD->mPrintSettings->GetFooterStrLeft(footerLeft); mPD->mPrintSettings->GetFooterStrCenter(footerCenter); mPD->mPrintSettings->GetFooterStrRight(footerRight); DrawHeaderFooter(aRenderingContext, *fontMet, eFooter, footerLeft, footerCenter, footerRight, rect, ascent, visibleHeight); } void nsPageFrame::SetSharedPageData(nsSharedPageData* aPD) { mPD = aPD; // Set the shared data into the page frame before reflow PageContentFrame()->SetSharedPageData(mPD); } nsIFrame* NS_NewPageBreakFrame(PresShell* aPresShell, ComputedStyle* aStyle) { MOZ_ASSERT(aPresShell, "null PresShell"); // check that we are only creating page break frames when printing NS_ASSERTION(aPresShell->GetPresContext()->IsPaginated(), "created a page break frame while not printing"); return new (aPresShell) nsPageBreakFrame(aStyle, aPresShell->GetPresContext()); } NS_IMPL_FRAMEARENA_HELPERS(nsPageBreakFrame) nsPageBreakFrame::nsPageBreakFrame(ComputedStyle* aStyle, nsPresContext* aPresContext) : nsLeafFrame(aStyle, aPresContext, kClassID) {} nsPageBreakFrame::~nsPageBreakFrame() = default; nscoord nsPageBreakFrame::GetIntrinsicISize() { return nsPresContext::CSSPixelsToAppUnits(1); } nscoord nsPageBreakFrame::GetIntrinsicBSize() { return 0; } void nsPageBreakFrame::Reflow(nsPresContext* aPresContext, ReflowOutput& aReflowOutput, const ReflowInput& aReflowInput, nsReflowStatus& aStatus) { DO_GLOBAL_REFLOW_COUNT("nsPageBreakFrame"); DISPLAY_REFLOW(aPresContext, this, aReflowInput, aReflowOutput, aStatus); MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!"); // Override reflow, since we don't want to deal with what our // computed values are. const WritingMode wm = aReflowInput.GetWritingMode(); nscoord bSize = aReflowInput.AvailableBSize(); if (aReflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) { bSize = nscoord(0); } else if (GetContent()->IsHTMLElement(nsGkAtoms::legend)) { // If this is a page break frame for a _rendered legend_ then it should be // ignored since these frames are inserted inside the fieldset's inner // frame and thus "misplaced". nsFieldSetFrame::Reflow deals with these // forced breaks explicitly instead. const nsContainerFrame* parent = GetParent(); if (parent && parent->Style()->GetPseudoType() == PseudoStyleType::fieldsetContent) { while ((parent = parent->GetParent())) { if (const nsFieldSetFrame* const fieldset = do_QueryFrame(parent)) { const auto* const legend = fieldset->GetLegend(); if (legend && legend->GetContent() == GetContent()) { bSize = nscoord(0); } break; } } } } LogicalSize finalSize(wm, GetIntrinsicISize(), bSize); // round the height down to the nearest pixel // XXX(mats) why??? finalSize.BSize(wm) -= finalSize.BSize(wm) % nsPresContext::CSSPixelsToAppUnits(1); aReflowOutput.SetSize(wm, finalSize); } #ifdef DEBUG_FRAME_DUMP nsresult nsPageBreakFrame::GetFrameName(nsAString& aResult) const { return MakeFrameName(u"PageBreak"_ns, aResult); } #endif