/* * Copyright (c) 2016, Alliance for Open Media. All rights reserved * * This source code is subject to the terms of the BSD 2 Clause License and * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License * was not distributed with this source code in the LICENSE file, you can * obtain it at www.aomedia.org/license/software. If the Alliance for Open * Media Patent License 1.0 was not distributed with this source code in the * PATENTS file, you can obtain it at www.aomedia.org/license/patent. */ #ifndef AOM_AV1_ENCODER_SPEED_FEATURES_H_ #define AOM_AV1_ENCODER_SPEED_FEATURES_H_ #include "av1/common/enums.h" #include "av1/encoder/enc_enums.h" #include "av1/encoder/mcomp.h" #include "av1/encoder/encodemb.h" #ifdef __cplusplus extern "C" { #endif /*! @file */ /*!\cond */ #define MAX_MESH_STEP 4 typedef struct MESH_PATTERN { int range; int interval; } MESH_PATTERN; enum { GM_FULL_SEARCH, GM_REDUCED_REF_SEARCH_SKIP_L2_L3, GM_REDUCED_REF_SEARCH_SKIP_L2_L3_ARF2, // Same as GM_REDUCED_REF_SEARCH_SKIP_L2_L3_ARF2 but with extra filtering // to keep at most two ref frames GM_SEARCH_CLOSEST_REFS_ONLY, GM_DISABLE_SEARCH } UENUM1BYTE(GM_SEARCH_TYPE); enum { DIST_WTD_COMP_ENABLED, DIST_WTD_COMP_SKIP_MV_SEARCH, DIST_WTD_COMP_DISABLED, } UENUM1BYTE(DIST_WTD_COMP_FLAG); enum { INTRA_ALL = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << D45_PRED) | (1 << D135_PRED) | (1 << D113_PRED) | (1 << D157_PRED) | (1 << D203_PRED) | (1 << D67_PRED) | (1 << SMOOTH_PRED) | (1 << SMOOTH_V_PRED) | (1 << SMOOTH_H_PRED) | (1 << PAETH_PRED), UV_INTRA_ALL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) | (1 << UV_D45_PRED) | (1 << UV_D135_PRED) | (1 << UV_D113_PRED) | (1 << UV_D157_PRED) | (1 << UV_D203_PRED) | (1 << UV_D67_PRED) | (1 << UV_SMOOTH_PRED) | (1 << UV_SMOOTH_V_PRED) | (1 << UV_SMOOTH_H_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), UV_INTRA_DC = (1 << UV_DC_PRED), UV_INTRA_DC_CFL = (1 << UV_DC_PRED) | (1 << UV_CFL_PRED), UV_INTRA_DC_TM = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED), UV_INTRA_DC_PAETH_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), UV_INTRA_DC_H_V = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED), UV_INTRA_DC_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) | (1 << UV_CFL_PRED), UV_INTRA_DC_PAETH_H_V = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED), UV_INTRA_DC_PAETH_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) | (1 << UV_CFL_PRED), INTRA_DC = (1 << DC_PRED), INTRA_DC_TM = (1 << DC_PRED) | (1 << PAETH_PRED), INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED), INTRA_DC_H_V_SMOOTH = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << SMOOTH_PRED), INTRA_DC_PAETH_H_V = (1 << DC_PRED) | (1 << PAETH_PRED) | (1 << V_PRED) | (1 << H_PRED) }; enum { INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEWMV) | (1 << NEAREST_NEARESTMV) | (1 << NEAR_NEARMV) | (1 << NEW_NEWMV) | (1 << NEAREST_NEWMV) | (1 << NEAR_NEWMV) | (1 << NEW_NEARMV) | (1 << NEW_NEARESTMV) | (1 << GLOBAL_GLOBALMV), INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEAREST_NEARESTMV) | (1 << GLOBAL_GLOBALMV) | (1 << NEAREST_NEWMV) | (1 << NEW_NEARESTMV) | (1 << NEW_NEARMV) | (1 << NEAR_NEWMV) | (1 << NEAR_NEARMV), INTER_SINGLE_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEWMV), }; enum { DISABLE_ALL_INTER_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | (1 << THR_ALTR) | (1 << THR_GOLD) | (1 << THR_LAST), DISABLE_ALL_SPLIT = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT, DISABLE_COMPOUND_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA), LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | (1 << THR_ALTR) | (1 << THR_GOLD) }; enum { TXFM_CODING_SF = 1, INTER_PRED_SF = 2, INTRA_PRED_SF = 4, PARTITION_SF = 8, LOOP_FILTER_SF = 16, RD_SKIP_SF = 32, RESERVE_2_SF = 64, RESERVE_3_SF = 128, } UENUM1BYTE(DEV_SPEED_FEATURES); /* This enumeration defines when the rate control recode loop will be * enabled. */ enum { /* * No recodes allowed */ DISALLOW_RECODE = 0, /* * Allow recode only for KF/ARF/GF frames */ ALLOW_RECODE_KFARFGF = 1, /* * Allow recode for all frame types based on bitrate constraints. */ ALLOW_RECODE = 2, } UENUM1BYTE(RECODE_LOOP_TYPE); enum { SUBPEL_TREE = 0, SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively SUBPEL_SEARCH_METHODS } UENUM1BYTE(SUBPEL_SEARCH_METHOD); enum { // Try the full image with different values. LPF_PICK_FROM_FULL_IMAGE, // Try the full image filter search with non-dual filter only. LPF_PICK_FROM_FULL_IMAGE_NON_DUAL, // Try a small portion of the image with different values. LPF_PICK_FROM_SUBIMAGE, // Estimate the level based on quantizer and frame type LPF_PICK_FROM_Q, // Pick 0 to disable LPF if LPF was enabled last frame LPF_PICK_MINIMAL_LPF } UENUM1BYTE(LPF_PICK_METHOD); /*!\endcond */ /*!\enum CDEF_PICK_METHOD * \brief This enumeration defines a variety of CDEF pick methods */ typedef enum { CDEF_FULL_SEARCH, /**< Full search */ CDEF_FAST_SEARCH_LVL1, /**< Search among a subset of all possible filters. */ CDEF_FAST_SEARCH_LVL2, /**< Search reduced subset of filters than Level 1. */ CDEF_FAST_SEARCH_LVL3, /**< Search reduced subset of secondary filters than Level 2. */ CDEF_FAST_SEARCH_LVL4, /**< Search reduced subset of filters than Level 3. */ CDEF_FAST_SEARCH_LVL5, /**< Search reduced subset of filters than Level 4. */ CDEF_PICK_FROM_Q, /**< Estimate filter strength based on quantizer. */ CDEF_PICK_METHODS } CDEF_PICK_METHOD; /*!\cond */ enum { // Terminate search early based on distortion so far compared to // qp step, distortion in the neighborhood of the frame, etc. FLAG_EARLY_TERMINATE = 1 << 0, // Skips comp inter modes if the best so far is an intra mode. FLAG_SKIP_COMP_BESTINTRA = 1 << 1, // Skips oblique intra modes if the best so far is an inter mode. FLAG_SKIP_INTRA_BESTINTER = 1 << 3, // Skips oblique intra modes at angles 27, 63, 117, 153 if the best // intra so far is not one of the neighboring directions. FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4, // Skips intra modes other than DC_PRED if the source variance is small FLAG_SKIP_INTRA_LOWVAR = 1 << 5, } UENUM1BYTE(MODE_SEARCH_SKIP_LOGIC); enum { // No tx type pruning TX_TYPE_PRUNE_0 = 0, // adaptively prunes the least perspective tx types out of all 16 // (tuned to provide negligible quality loss) TX_TYPE_PRUNE_1 = 1, // similar, but applies much more aggressive pruning to get better speed-up TX_TYPE_PRUNE_2 = 2, TX_TYPE_PRUNE_3 = 3, // More aggressive pruning based on tx type score and allowed tx count TX_TYPE_PRUNE_4 = 4, TX_TYPE_PRUNE_5 = 5, } UENUM1BYTE(TX_TYPE_PRUNE_MODE); enum { // No reaction to rate control on a detected slide/scene change. NO_DETECTION = 0, // Set to larger Q based only on the detected slide/scene change and // current/past Q. FAST_DETECTION_MAXQ = 1, } UENUM1BYTE(OVERSHOOT_DETECTION_CBR); enum { // Turns off multi-winner mode. So we will do txfm search on either all modes // if winner mode is off, or we will only on txfm search on a single winner // mode. MULTI_WINNER_MODE_OFF = 0, // Limits the number of winner modes to at most 2 MULTI_WINNER_MODE_FAST = 1, // Uses the default number of winner modes, which is 3 for intra mode, and 1 // for inter mode. MULTI_WINNER_MODE_DEFAULT = 2, // Maximum number of winner modes allowed. MULTI_WINNER_MODE_LEVELS, } UENUM1BYTE(MULTI_WINNER_MODE_TYPE); enum { PRUNE_NEARMV_OFF = 0, // Turn off nearmv pruning PRUNE_NEARMV_LEVEL1 = 1, // Prune nearmv for qindex (0-85) PRUNE_NEARMV_LEVEL2 = 2, // Prune nearmv for qindex (0-170) PRUNE_NEARMV_LEVEL3 = 3, // Prune nearmv more aggressively for qindex (0-170) PRUNE_NEARMV_MAX = PRUNE_NEARMV_LEVEL3, } UENUM1BYTE(PRUNE_NEARMV_LEVEL); enum { // Default transform search used in evaluation of best inter candidates // (MODE_EVAL stage) and motion mode winner processing (WINNER_MODE_EVAL // stage). TX_SEARCH_DEFAULT = 0, // Transform search in motion mode rd during MODE_EVAL stage. TX_SEARCH_MOTION_MODE, // Transform search in compound type mode rd during MODE_EVAL stage. TX_SEARCH_COMP_TYPE_MODE, // All transform search cases TX_SEARCH_CASES } UENUM1BYTE(TX_SEARCH_CASE); typedef struct { TX_TYPE_PRUNE_MODE prune_2d_txfm_mode; int fast_intra_tx_type_search; // INT_MAX: Disable fast search. // 1 - 1024: Probability threshold used for conditionally forcing tx type, // during mode search. // 0: Force tx type to be DCT_DCT unconditionally, during // mode search. int fast_inter_tx_type_prob_thresh; // Prune less likely chosen transforms for each intra mode. The speed // feature ranges from 0 to 2, for different speed / compression trade offs. int use_reduced_intra_txset; // Use a skip flag prediction model to detect blocks with skip = 1 early // and avoid doing full TX type search for such blocks. int use_skip_flag_prediction; // Threshold used by the ML based method to predict TX block split decisions. int ml_tx_split_thresh; // skip remaining transform type search when we found the rdcost of skip is // better than applying transform int skip_tx_search; // Prune tx type search using previous frame stats. int prune_tx_type_using_stats; // Prune tx type search using estimated RDcost int prune_tx_type_est_rd; // Flag used to control the winner mode processing for tx type pruning for // inter blocks. It enables further tx type mode pruning based on ML model for // mode evaluation and disables tx type mode pruning for winner mode // processing. int winner_mode_tx_type_pruning; } TX_TYPE_SEARCH; enum { // Search partitions using RD criterion SEARCH_PARTITION, // Always use a fixed size partition FIXED_PARTITION, // Partition using source variance VAR_BASED_PARTITION, #if CONFIG_RT_ML_PARTITIONING // Partition using ML model ML_BASED_PARTITION #endif } UENUM1BYTE(PARTITION_SEARCH_TYPE); enum { NOT_IN_USE, DIRECT_PRED, RELAXED_PRED, ADAPT_PRED } UENUM1BYTE(MAX_PART_PRED_MODE); enum { LAST_MV_DATA, CURRENT_Q, QTR_ONLY, } UENUM1BYTE(MV_PREC_LOGIC); enum { SUPERRES_AUTO_ALL, // Tries all possible superres ratios SUPERRES_AUTO_DUAL, // Tries no superres and q-based superres ratios SUPERRES_AUTO_SOLO, // Only apply the q-based superres ratio } UENUM1BYTE(SUPERRES_AUTO_SEARCH_TYPE); /*!\endcond */ /*!\enum INTERNAL_COST_UPDATE_TYPE * \brief This enum decides internally how often to update the entropy costs * * INTERNAL_COST_UPD_TYPE is similar to \ref COST_UPDATE_TYPE but has slightly * more flexibility in update frequency. This enum is separate from \ref * COST_UPDATE_TYPE because although \ref COST_UPDATE_TYPE is not exposed, its * values are public so it cannot be modified without breaking public API. * Due to the use of AOMMIN() in populate_unified_cost_update_freq() to * compute the unified cost update frequencies (out of COST_UPDATE_TYPE and * INTERNAL_COST_UPDATE_TYPE), the values of this enum type must be listed in * the order of increasing frequencies. * * \warning In case of any updates/modifications to the enum COST_UPDATE_TYPE, * update the enum INTERNAL_COST_UPDATE_TYPE as well. */ typedef enum { INTERNAL_COST_UPD_OFF, /*!< Turn off cost updates. */ INTERNAL_COST_UPD_TILE, /*!< Update every tile. */ INTERNAL_COST_UPD_SBROW_SET, /*!< Update every row_set of height 256 pixs. */ INTERNAL_COST_UPD_SBROW, /*!< Update every sb rows inside a tile. */ INTERNAL_COST_UPD_SB, /*!< Update every sb. */ } INTERNAL_COST_UPDATE_TYPE; /*!\enum SIMPLE_MOTION_SEARCH_PRUNE_LEVEL * \brief This enumeration defines a variety of simple motion search based * partition prune levels */ typedef enum { NO_PRUNING = -1, SIMPLE_AGG_LVL0, /*!< Simple prune aggressiveness level 0. */ SIMPLE_AGG_LVL1, /*!< Simple prune aggressiveness level 1. */ SIMPLE_AGG_LVL2, /*!< Simple prune aggressiveness level 2. */ SIMPLE_AGG_LVL3, /*!< Simple prune aggressiveness level 3. */ QIDX_BASED_AGG_LVL1, /*!< Qindex based prune aggressiveness level, aggressive level maps to simple agg level 1 or 2 based on qindex. */ TOTAL_SIMPLE_AGG_LVLS = QIDX_BASED_AGG_LVL1, /*!< Total number of simple prune aggressiveness levels. */ TOTAL_QINDEX_BASED_AGG_LVLS = QIDX_BASED_AGG_LVL1 - SIMPLE_AGG_LVL3, /*!< Total number of qindex based simple prune aggressiveness levels. */ TOTAL_AGG_LVLS = TOTAL_SIMPLE_AGG_LVLS + TOTAL_QINDEX_BASED_AGG_LVLS, /*!< Total number of levels. */ } SIMPLE_MOTION_SEARCH_PRUNE_LEVEL; /*!\enum PRUNE_MESH_SEARCH_LEVEL * \brief This enumeration defines a variety of mesh search prune levels. */ typedef enum { PRUNE_MESH_SEARCH_DISABLED = 0, /*!< Prune mesh search level 0. */ PRUNE_MESH_SEARCH_LVL_1 = 1, /*!< Prune mesh search level 1. */ PRUNE_MESH_SEARCH_LVL_2 = 2, /*!< Prune mesh search level 2. */ } PRUNE_MESH_SEARCH_LEVEL; /*!\enum INTER_SEARCH_EARLY_TERM_IDX * \brief This enumeration defines inter search early termination index in * non-rd path based on sse value. */ typedef enum { EARLY_TERM_DISABLED = 0, /*!< Early terminate inter mode search based on sse disabled. */ EARLY_TERM_IDX_1 = 1, /*!< Early terminate inter mode search based on sse, index 1. */ EARLY_TERM_IDX_2 = 2, /*!< Early terminate inter mode search based on sse, index 2. */ EARLY_TERM_IDX_3 = 3, /*!< Early terminate inter mode search based on sse, index 3. */ EARLY_TERM_IDX_4 = 4, /*!< Early terminate inter mode search based on sse, index 4. */ EARLY_TERM_INDICES, /*!< Total number of early terminate indices */ } INTER_SEARCH_EARLY_TERM_IDX; /*! * \brief Sequence/frame level speed vs quality features */ typedef struct HIGH_LEVEL_SPEED_FEATURES { /*! Frame level coding parameter update. */ int frame_parameter_update; /*! * Cases and frame types for which the recode loop is enabled. */ RECODE_LOOP_TYPE recode_loop; /*! * Controls the tolerance vs target rate used in deciding whether to * recode a frame. It has no meaning if recode is disabled. */ int recode_tolerance; /*! * Determine how motion vector precision is chosen. The possibilities are: * LAST_MV_DATA: use the mv data from the last coded frame * CURRENT_Q: use the current q as a threshold * QTR_ONLY: use quarter pel precision only. */ MV_PREC_LOGIC high_precision_mv_usage; /*! * Always set to 0. If on it enables 0 cost background transmission * (except for the initial transmission of the segmentation). The feature is * disabled because the addition of very large block sizes make the * backgrounds very to cheap to encode, and the segmentation we have * adds overhead. */ int static_segmentation; /*! * Superres-auto mode search type: */ SUPERRES_AUTO_SEARCH_TYPE superres_auto_search_type; /*! * Enable/disable extra screen content test by encoding key frame twice. */ int disable_extra_sc_testing; /*! * Enable/disable second_alt_ref temporal filtering. */ int second_alt_ref_filtering; /*! * The number of frames to be used during temporal filtering of an ARF frame * is adjusted based on noise level of the current frame. The sf has three * levels to decide number of frames to be considered for filtering: * 0 : Use default number of frames * 1 and 2 : Reduce the number of frames based on noise level with varied * aggressiveness */ int adjust_num_frames_for_arf_filtering; /*! * Decide the bit estimation approach used in qindex decision. * 0: estimate bits based on a constant value; * 1: estimate bits more accurately based on the frame complexity. */ int accurate_bit_estimate; /*! * Decide the approach for weight calculation during temporal filtering. * 0: Calculate weight using exp() * 1: Calculate weight using a lookup table that approximates exp(). */ int weight_calc_level_in_tf; /*! * Decide whether to perform motion estimation at split block (i.e. 16x16) * level or not. * 0: Always allow motion estimation. * 1: Conditionally allow motion estimation based on 4x4 sub-blocks variance. */ int allow_sub_blk_me_in_tf; } HIGH_LEVEL_SPEED_FEATURES; /*! * Speed features for the first pass. */ typedef struct FIRST_PASS_SPEED_FEATURES { /*! * \brief Reduces the mv search window. * By default, the initial search window is around * MIN(MIN(dims), MAX_FULL_PEL_VAL) = MIN(MIN(dims), 1023). * Each step reduction decrease the window size by about a factor of 2. */ int reduce_mv_step_param; /*! * \brief Skips the motion search when the zero mv has small sse. */ int skip_motion_search_threshold; /*! * \brief Skips reconstruction by using source buffers for prediction */ int disable_recon; /*! * \brief Skips the motion search centered on 0,0 mv. */ int skip_zeromv_motion_search; } FIRST_PASS_SPEED_FEATURES; /*!\cond */ typedef struct TPL_SPEED_FEATURES { // GOP length adaptive decision. // If set to 0, tpl model decides whether a shorter gf interval is better. // If set to 1, tpl stats of ARFs from base layer, (base+1) layer and // (base+2) layer decide whether a shorter gf interval is better. // If set to 2, tpl stats of ARFs from base layer, (base+1) layer and GF boost // decide whether a shorter gf interval is better. // If set to 3, gop length adaptive decision is disabled. int gop_length_decision_method; // Prune the intra modes search by tpl. // If set to 0, we will search all intra modes from DC_PRED to PAETH_PRED. // If set to 1, we only search DC_PRED, V_PRED, and H_PRED. int prune_intra_modes; // This parameter controls which step in the n-step process we start at. int reduce_first_step_size; // Skip motion estimation based on the precision of center MVs and the // difference between center MVs. // If set to 0, motion estimation is skipped for duplicate center MVs // (default). If set to 1, motion estimation is skipped for duplicate // full-pixel center MVs. If set to 2, motion estimation is skipped if the // difference between center MVs is less than the threshold. int skip_alike_starting_mv; // When to stop subpel search. SUBPEL_FORCE_STOP subpel_force_stop; // Which search method to use. SEARCH_METHODS search_method; // Prune starting mvs in TPL based on sad scores. int prune_starting_mv; // Prune reference frames in TPL. int prune_ref_frames_in_tpl; // Support compound predictions. int allow_compound_pred; // Calculate rate and distortion based on Y plane only. int use_y_only_rate_distortion; // Use SAD instead of SATD during intra/inter mode search. // If set to 0, use SATD always. // If set to 1, use SAD during intra/inter mode search for frames in the // higher temporal layers of the hierarchical prediction structure. // If set to 2, use SAD during intra/inter mode search for all frames. // This sf is disabled for the first GF group of the key-frame interval, // i.e., SATD is used during intra/inter mode search of the first GF group. int use_sad_for_mode_decision; // Skip tpl processing for frames of type LF_UPDATE. // This sf is disabled for the first GF group of the key-frame interval. int reduce_num_frames; } TPL_SPEED_FEATURES; typedef struct GLOBAL_MOTION_SPEED_FEATURES { GM_SEARCH_TYPE gm_search_type; // During global motion estimation, prune remaining reference frames in a // given direction(past/future), if the evaluated ref_frame in that direction // yields gm_type as INVALID/TRANSLATION/IDENTITY int prune_ref_frame_for_gm_search; // When the current GM type is set to ZEROMV, prune ZEROMV if its performance // is worse than NEWMV under SSE metric. // 0 : no pruning // 1 : conservative pruning // 2 : aggressive pruning int prune_zero_mv_with_sse; // Disable global motion estimation based on stats of previous frames in the // GF group int disable_gm_search_based_on_stats; // Number of refinement steps to apply after initial model generation int num_refinement_steps; } GLOBAL_MOTION_SPEED_FEATURES; typedef struct PARTITION_SPEED_FEATURES { PARTITION_SEARCH_TYPE partition_search_type; // Used if partition_search_type = FIXED_PARTITION BLOCK_SIZE fixed_partition_size; // Prune extended partition types search based on the current best partition // and the combined rdcost of the subblocks estimated from previous // partitions. Can take values 0 - 2, 0 referring to no pruning, and 1 - 2 // increasing aggressiveness of pruning in order. int prune_ext_partition_types_search_level; // Prune part4 based on block size int prune_part4_search; // Use a ML model to prune rectangular, ab and 4-way horz // and vert partitions int ml_prune_partition; // Use a ML model to adaptively terminate partition search after trying // PARTITION_SPLIT. Can take values 0 - 2, 0 meaning not being enabled, and // 1 - 2 increasing aggressiveness in order. int ml_early_term_after_part_split_level; // Skip rectangular partition test when partition type none gives better // rd than partition type split. Can take values 0 - 2, 0 referring to no // skipping, and 1 - 2 increasing aggressiveness of skipping in order. int less_rectangular_check_level; // Use square partition only beyond this block size. BLOCK_SIZE use_square_partition_only_threshold; // Sets max square partition levels for this superblock based on // motion vector and prediction error distribution produced from 16x16 // simple motion search MAX_PART_PRED_MODE auto_max_partition_based_on_simple_motion; // Min and max square partition size we enable (block_size) as per auto // min max, but also used by adjust partitioning, and pick_partitioning. BLOCK_SIZE default_min_partition_size; BLOCK_SIZE default_max_partition_size; // Sets level of adjustment of variance-based partitioning during // rd_use_partition 0 - no partition adjustment, 1 - try to merge partitions // for small blocks and high QP, 2 - try to merge partitions, 3 - try to merge // and split leaf partitions and 0 - 3 decreasing aggressiveness in order. int adjust_var_based_rd_partitioning; // Partition search early breakout thresholds. int64_t partition_search_breakout_dist_thr; int partition_search_breakout_rate_thr; // Thresholds for ML based partition search breakout. int ml_partition_search_breakout_thresh[PARTITION_BLOCK_SIZES]; // Aggressiveness levels for pruning split and rectangular partitions based on // simple_motion_search. SIMPLE_AGG_LVL0 to SIMPLE_AGG_LVL3 correspond to // simple motion search based pruning. QIDX_BASED_AGG_LVL1 corresponds to // qindex based and simple motion search based pruning. int simple_motion_search_prune_agg; // Perform simple_motion_search on each possible subblock and use it to prune // PARTITION_HORZ and PARTITION_VERT. int simple_motion_search_prune_rect; // Perform simple motion search before none_partition to decide if we // want to remove all partitions other than PARTITION_SPLIT. If set to 0, this // model is disabled. If set to 1, the model attempts to perform // PARTITION_SPLIT only. If set to 2, the model also attempts to prune // PARTITION_SPLIT. int simple_motion_search_split; // Use features from simple_motion_search to terminate prediction block // partition after PARTITION_NONE int simple_motion_search_early_term_none; // Controls whether to reduce the number of motion search steps. If this is 0, // then simple_motion_search has the same number of steps as // single_motion_search (assuming no other speed features). Otherwise, reduce // the number of steps by the value contained in this variable. int simple_motion_search_reduce_search_steps; // This variable controls the maximum block size where intra blocks can be // used in inter frames. // TODO(aconverse): Fold this into one of the other many mode skips BLOCK_SIZE max_intra_bsize; // Use CNN with luma pixels on source frame on each of the 64x64 subblock to // perform partition pruning in intra frames. // 0: No Pruning // 1: Prune split and rectangular partitions only // 2: Prune none, split and rectangular partitions int intra_cnn_based_part_prune_level; // Disable extended partition search if the current bsize is greater than the // threshold. Must be a square block size BLOCK_8X8 or higher. BLOCK_SIZE ext_partition_eval_thresh; // Use best partition decision so far to tune 'ext_partition_eval_thresh' int ext_part_eval_based_on_cur_best; // Disable rectangular partitions for larger block sizes. int rect_partition_eval_thresh; // Prune extended partition search based on whether the split/rect partitions // provided an improvement in the previous search. // 0 : no pruning // 1 : prune 1:4 partition search using winner info from split partitions // 2 : prune 1:4 and AB partition search using split and HORZ/VERT info int prune_ext_part_using_split_info; // Prunt rectangular, AB and 4-way partition based on q index and block size // 0 : no pruning // 1 : prune sub_8x8 at very low quantizers // 2 : prune all block size based on qindex int prune_rectangular_split_based_on_qidx; // Prune rectangular partitions based on 4x4 sub-block variance // false : no pruning // true : prune rectangular partitions based on 4x4 sub-block variance // deviation // // For allintra encode, this speed feature reduces instruction count by 6.4% // for speed=6 with coding performance change less than 0.24%. For AVIF image // encode, this speed feature reduces encode time by 8.14% for speed 6 on a // typical image dataset with coding performance change less than 0.16%. This // speed feature is not applicable to speed >= 7. bool prune_rect_part_using_4x4_var_deviation; // Prune rectangular partitions based on prediction mode chosen by NONE // partition. // false : no pruning // true : prunes rectangular partition as described below // If prediction mode chosen by NONE partition is // DC_PRED or SMOOTH_PRED: Prunes both horizontal and vertical partitions if // at least one of the left and top neighbor blocks is larger than the // current block. // Directional Mode: Prunes either of the horizontal and vertical partition // based on center angle of the prediction mode chosen by NONE partition. For // example, vertical partition is pruned if center angle of the prediction // mode chosen by NONE partition is close to 180 degrees (i.e. horizontal // direction) and vice versa. // For allintra encode, this speed feature reduces instruction count by 5.1% // for speed=6 with coding performance change less than 0.22%. For AVIF image // encode, this speed feature reduces encode time by 4.44% for speed 6 on a // typical image dataset with coding performance change less than 0.15%. // For speed >= 7, variance-based logic is used to determine the partition // structure instead of recursive partition search. Therefore, this speed // feature is not applicable in such cases. bool prune_rect_part_using_none_pred_mode; // Terminate partition search for child partition, // when NONE and SPLIT partition rd_costs are INT64_MAX. int early_term_after_none_split; // Level used to adjust threshold for av1_ml_predict_breakout(). At lower // levels, more conservative threshold is used, and value of 0 indicates // av1_ml_predict_breakout() is disabled. Value of 3 corresponds to default // case with no adjustment to lbd thresholds. int ml_predict_breakout_level; // Prune sub_8x8 (BLOCK_4X4, BLOCK_4X8 and BLOCK_8X4) partitions. // 0 : no pruning // 1 : pruning based on neighbour block information // 2 : prune always int prune_sub_8x8_partition_level; // Prune rectangular split based on simple motion search split/no_split score. // 0: disable pruning, 1: enable pruning int simple_motion_search_rect_split; // The current encoder adopts a DFS search for block partitions. // Therefore the mode selection and associated rdcost is ready for smaller // blocks before the mode selection for some partition types. // AB partition could use previous rd information and skip mode search. // An example is: // // current block // +---+---+ // | | // + + // | | // +-------+ // // SPLIT partition has been searched first before trying HORZ_A // +---+---+ // | R | R | // +---+---+ // | R | R | // +---+---+ // // HORZ_A // +---+---+ // | | | // +---+---+ // | | // +-------+ // // With this speed feature, the top two sub blocks can directly use rdcost // searched in split partition, and the mode info is also copied from // saved info. Similarly, the bottom rectangular block can also use // the available information from previous rectangular search. int reuse_prev_rd_results_for_part_ab; // Reuse the best prediction modes found in PARTITION_SPLIT and PARTITION_RECT // when encoding PARTITION_AB. int reuse_best_prediction_for_part_ab; // The current partition search records the best rdcost so far and uses it // in mode search and transform search to early skip when some criteria is // met. For example, when the current rdcost is larger than the best rdcost, // or the model rdcost is larger than the best rdcost times some thresholds. // By default, this feature is turned on to speed up the encoder partition // search. // If disabling it, at speed 0, 30 frames, we could get // about -0.25% quality gain (psnr, ssim, vmaf), with about 13% slowdown. int use_best_rd_for_pruning; // Skip evaluation of non-square partitions based on the corresponding NONE // partition. // 0: no pruning // 1: prune extended partitions if NONE is skippable // 2: on top of 1, prune rectangular partitions if NONE is inter, not a newmv // mode and skippable int skip_non_sq_part_based_on_none; // Disables 8x8 and below partitions for low quantizers. int disable_8x8_part_based_on_qidx; } PARTITION_SPEED_FEATURES; typedef struct MV_SPEED_FEATURES { // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc). SEARCH_METHODS search_method; // Enable the use of faster, less accurate mv search method // 0: disable, 1: if bsize >= BLOCK_32X32, 2: based on bsize, SAD and qp // TODO(chiyotsai@google.com): Take the clip's resolution and mv activity into // account. int use_bsize_dependent_search_method; // If this is set to 1, we limit the motion search range to 2 times the // largest motion vector found in the last frame. int auto_mv_step_size; // Subpel_search_method can only be subpel_tree which does a subpixel // logarithmic search that keeps stepping at 1/2 pixel units until // you stop getting a gain, and then goes on to 1/4 and repeats // the same process. Along the way it skips many diagonals. SUBPEL_SEARCH_METHOD subpel_search_method; // Maximum number of steps in logarithmic subpel search before giving up. int subpel_iters_per_step; // When to stop subpel search. SUBPEL_FORCE_STOP subpel_force_stop; // When to stop subpel search in simple motion search. SUBPEL_FORCE_STOP simple_motion_subpel_force_stop; // If true, sub-pixel search uses the exact convolve function used for final // encoding and decoding; otherwise, it uses bilinear interpolation. SUBPEL_SEARCH_TYPE use_accurate_subpel_search; // Threshold for allowing exhaustive motion search. int exhaustive_searches_thresh; // Pattern to be used for any exhaustive mesh searches (except intraBC ME). MESH_PATTERN mesh_patterns[MAX_MESH_STEP]; // Pattern to be used for exhaustive mesh searches of intraBC ME. MESH_PATTERN intrabc_mesh_patterns[MAX_MESH_STEP]; // Reduce single motion search range based on MV result of prior ref_mv_idx. int reduce_search_range; // Prune mesh search. PRUNE_MESH_SEARCH_LEVEL prune_mesh_search; // Use the rd cost around the best FULLPEL_MV to speed up subpel search int use_fullpel_costlist; // Set the full pixel search level of obmc // 0: obmc_full_pixel_diamond // 1: obmc_refining_search_sad (faster) int obmc_full_pixel_search_level; // Accurate full pixel motion search based on TPL stats. int full_pixel_search_level; // Allow intrabc motion search int use_intrabc; // Whether to downsample the rows in sad calculation during motion search. // This is only active when there are at least 16 rows. When this sf is // active, if there is a large discrepancy in the SAD values for the final // motion vector between skipping vs not skipping, motion search is redone // with skip row features off. // 0: Disabled (do not downsample rows) // 1: Skip SAD calculation of odd rows if the SAD deviation of the even and // odd rows for the starting MV is small. Redo motion search with sf off // when SAD deviation is high for the final motion vector. // 2: Skip SAD calculation of odd rows. SAD deviation is not tested for the // start MV and tested only for the final MV. int use_downsampled_sad; // Enable/disable extensive joint motion search. int disable_extensive_joint_motion_search; // Enable second best mv check in joint mv search. // 0: allow second MV (use rd cost as the metric) // 1: use var as the metric // 2: disable second MV int disable_second_mv; // Skips full pixel search based on start mv of prior ref_mv_idx. // 0: Disabled // 1: Skips the full pixel search upto 4 neighbor full-pel MV positions. // 2: Skips the full pixel search upto 8 neighbor full-pel MV positions. int skip_fullpel_search_using_startmv; // Method to use for refining WARPED_CAUSAL motion vectors // TODO(rachelbarker): Can this be unified with OBMC in some way? WARP_SEARCH_METHOD warp_search_method; // Maximum number of iterations in WARPED_CAUSAL refinement search int warp_search_iters; } MV_SPEED_FEATURES; typedef struct INTER_MODE_SPEED_FEATURES { // 2-pass inter mode model estimation where the preliminary pass skips // transform search and uses a model to estimate rd, while the final pass // computes the full transform search. Two types of models are supported: // 0: not used // 1: used with online dynamic rd model // 2: used with static rd model int inter_mode_rd_model_estimation; // Bypass transform search based on skip rd at following stages // i. Compound type mode search // ii. Motion mode search (mode evaluation and winner motion mode stage) // iii. Transform search for best inter candidates int txfm_rd_gate_level[TX_SEARCH_CASES]; // Limit the inter mode tested in the RD loop int reduce_inter_modes; // This variable is used to cap the maximum number of times we skip testing a // mode to be evaluated. A high value means we will be faster. int adaptive_rd_thresh; // Aggressively prune inter modes when best mode is skippable. int prune_inter_modes_if_skippable; // Drop less likely to be picked reference frames in the RD search. // Has seven levels for now: 0, 1, 2, 3, 4, 5 and 6 where higher levels prune // more aggressively than lower ones. (0 means no pruning). int selective_ref_frame; // Prune reference frames for rectangular partitions. // 0 implies no pruning // 1 implies prune for extended partition // 2 implies prune horiz, vert and extended partition int prune_ref_frame_for_rect_partitions; // Prune inter modes w.r.t past reference frames // 0 no pruning // 1 prune inter modes w.r.t ALTREF2 and ALTREF reference frames // 2 prune inter modes w.r.t BWDREF, ALTREF2 and ALTREF reference frames int alt_ref_search_fp; // Prune reference frames for single prediction modes based on temporal // distance and pred MV SAD. Feasible values are 0, 1, 2. The feature is // disabled for 0. An increasing value indicates more aggressive pruning // threshold. int prune_single_ref; // Prune compound reference frames // 0 no pruning // 1 prune compound references which do not satisfy the two conditions: // a) The references are at a nearest distance from the current frame in // both past and future direction. // b) The references have minimum pred_mv_sad in both past and future // direction. // 2 prune compound references except the one with nearest distance from the // current frame in both past and future direction. int prune_comp_ref_frames; // Skip the current ref_mv in NEW_MV mode based on mv, rate cost, etc. // This speed feature equaling 0 means no skipping. // If the speed feature equals 1 or 2, skip the current ref_mv in NEW_MV mode // if we have already encountered ref_mv in the drl such that: // 1. The other drl has the same mv during the SIMPLE_TRANSLATION search // process as the current mv. // 2. The rate needed to encode the current mv is larger than that for the // other ref_mv. // The speed feature equaling 1 means using subpel mv in the comparison. // The speed feature equaling 2 means using fullpel mv in the comparison. // If the speed feature >= 3, skip the current ref_mv in NEW_MV mode based on // known full_mv bestsme and drl cost. int skip_newmv_in_drl; // This speed feature checks duplicate ref MVs among NEARESTMV, NEARMV, // GLOBALMV and skips NEARMV or GLOBALMV (in order) if a duplicate is found // TODO(any): Instead of skipping repeated ref mv, use the recalculated // rd-cost based on mode rate and skip the mode evaluation int skip_repeated_ref_mv; // Flag used to control the ref_best_rd based gating for chroma int perform_best_rd_based_gating_for_chroma; // Reuse the inter_intra_mode search result from NEARESTMV mode to other // single ref modes int reuse_inter_intra_mode; // prune wedge and compound segment approximate rd evaluation based on // compound average modeled rd int prune_comp_type_by_model_rd; // prune wedge and compound segment approximate rd evaluation based on // compound average rd/ref_best_rd int prune_comp_type_by_comp_avg; // Skip some ref frames in compound motion search by single motion search // result. Has three levels for now: 0 referring to no skipping, and 1 - 3 // increasing aggressiveness of skipping in order. // Note: The search order might affect the result. It assumes that the single // reference modes are searched before compound modes. It is better to search // same single inter mode as a group. int prune_comp_search_by_single_result; // Instead of performing a full MV search, do a simple translation first // and only perform a full MV search on the motion vectors that performed // well. int prune_mode_search_simple_translation; // Only search compound modes with at least one "good" reference frame. // A reference frame is good if, after looking at its performance among // the single reference modes, it is one of the two best performers. int prune_compound_using_single_ref; // Skip extended compound mode (NEAREST_NEWMV, NEW_NEARESTMV, NEAR_NEWMV, // NEW_NEARMV) using ref frames of above and left neighbor // blocks. // 0 : no pruning // 1 : prune ext compound modes using neighbor blocks (less aggressiveness) // 2 : prune ext compound modes using neighbor blocks (high aggressiveness) // 3 : prune ext compound modes unconditionally (highest aggressiveness) int prune_ext_comp_using_neighbors; // Skip NEW_NEARMV and NEAR_NEWMV extended compound modes int skip_ext_comp_nearmv_mode; // Skip extended compound mode when ref frame corresponding to NEWMV does not // have NEWMV as single mode winner. // 0 : no pruning // 1 : prune extended compound mode (less aggressiveness) // 2 : prune extended compound mode (high aggressiveness) int prune_comp_using_best_single_mode_ref; // Skip NEARESTMV and NEARMV using weight computed in ref mv list population // // Pruning is enabled only when both the top and left neighbor blocks are // available and when the current block already has a valid inter prediction. int prune_nearest_near_mv_using_refmv_weight; // Based on previous ref_mv_idx search result, prune the following search. int prune_ref_mv_idx_search; // Disable one sided compound modes. int disable_onesided_comp; // Prune obmc search using previous frame stats. // INT_MAX : disable obmc search int prune_obmc_prob_thresh; // Prune warped motion search using previous frame stats. int prune_warped_prob_thresh; // Variance threshold to enable/disable Interintra wedge search unsigned int disable_interintra_wedge_var_thresh; // Variance threshold to enable/disable Interinter wedge search unsigned int disable_interinter_wedge_var_thresh; // De-couple wedge and mode search during interintra RDO. int fast_interintra_wedge_search; // Whether fast wedge sign estimate is used int fast_wedge_sign_estimate; // Enable/disable ME for interinter wedge search. int disable_interinter_wedge_newmv_search; // Decide when and how to use joint_comp. DIST_WTD_COMP_FLAG use_dist_wtd_comp_flag; // Clip the frequency of updating the mv cost. INTERNAL_COST_UPDATE_TYPE mv_cost_upd_level; // Clip the frequency of updating the coeff cost. INTERNAL_COST_UPDATE_TYPE coeff_cost_upd_level; // Clip the frequency of updating the mode cost. INTERNAL_COST_UPDATE_TYPE mode_cost_upd_level; // Prune inter modes based on tpl stats // 0 : no pruning // 1 - 3 indicate increasing aggressiveness in order. int prune_inter_modes_based_on_tpl; // Skip NEARMV and NEAR_NEARMV modes using ref frames of above and left // neighbor blocks and qindex. PRUNE_NEARMV_LEVEL prune_nearmv_using_neighbors; // Model based breakout after interpolation filter search // 0: no breakout // 1: use model based rd breakout int model_based_post_interp_filter_breakout; // Reuse compound type rd decision when exact match is found // 0: No reuse // 1: Reuse the compound type decision int reuse_compound_type_decision; // Enable/disable masked compound. int disable_masked_comp; // Enable/disable MV refinement for compound modes corresponds to compound // types COMPOUND_AVERAGE, COMPOUND_DISTWTD (currently, this compound type // is disabled for speeds >= 2 using the sf 'use_dist_wtd_comp_flag') and // COMPOUND_DIFFWTD based on the availability. Levels 0 to 3 indicate // increasing order of aggressiveness to disable MV refinement. // 0: MV Refinement is enabled and for NEW_NEWMV mode used two iterations of // refinement in av1_joint_motion_search(). // 1: MV Refinement is disabled for COMPOUND_DIFFWTD and enabled for // COMPOUND_AVERAGE & COMPOUND_DISTWTD. // 2: MV Refinement is enabled for COMPOUND_AVERAGE & COMPOUND_DISTWTD for // NEW_NEWMV mode with one iteration of refinement in // av1_joint_motion_search() and MV Refinement is disabled for other compound // type modes. // 3: MV Refinement is disabled. int enable_fast_compound_mode_search; // Reuse masked compound type search results int reuse_mask_search_results; // Enable/disable fast search for wedge masks int enable_fast_wedge_mask_search; // Early breakout from transform search of inter modes int inter_mode_txfm_breakout; // Limit number of inter modes for txfm search if a newmv mode gets // evaluated among the top modes. // 0: no pruning // 1 to 3 indicate increasing order of aggressiveness int limit_inter_mode_cands; // Cap the no. of txfm searches for a given prediction mode. // 0: no cap, 1: cap beyond first 4 searches, 2: cap beyond first 3 searches. int limit_txfm_eval_per_mode; // Prune warped motion search based on block size. int extra_prune_warped; // Do not search compound modes for ARF. // The intuition is that ARF is predicted by frames far away from it, // whose temporal correlations with the ARF are likely low. // It is therefore likely that compound modes do not work as well for ARF // as other inter frames. // Speed/quality impact: // Speed 1: 12% faster, 0.1% psnr loss. // Speed 2: 2% faster, 0.05% psnr loss. // No change for speed 3 and up, because |disable_onesided_comp| is true. int skip_arf_compound; } INTER_MODE_SPEED_FEATURES; typedef struct INTERP_FILTER_SPEED_FEATURES { // Do limited interpolation filter search for dual filters, since best choice // usually includes EIGHTTAP_REGULAR. int use_fast_interpolation_filter_search; // Disable dual filter int disable_dual_filter; // Save results of av1_interpolation_filter_search for a block // Check mv and ref_frames before search, if they are very close with previous // saved results, filter search can be skipped. int use_interp_filter; // skip sharp_filter evaluation based on regular and smooth filter rd for // dual_filter=0 case int skip_sharp_interp_filter_search; // skip interpolation filter search for a block in chessboard pattern int cb_pred_filter_search; // adaptive interp_filter search to allow skip of certain filter types. int adaptive_interp_filter_search; // Forces interpolation filter to EIGHTTAP_REGULAR and skips interpolation // filter search. int skip_interp_filter_search; } INTERP_FILTER_SPEED_FEATURES; typedef struct INTRA_MODE_SPEED_FEATURES { // These bit masks allow you to enable or disable intra modes for each // transform size separately. int intra_y_mode_mask[TX_SIZES]; int intra_uv_mode_mask[TX_SIZES]; // flag to allow skipping intra mode for inter frame prediction int skip_intra_in_interframe; // Prune intra mode candidates based on source block histogram of gradient. // Applies to luma plane only. // Feasible values are 0..4. The feature is disabled for 0. An increasing // value indicates more aggressive pruning threshold. int intra_pruning_with_hog; // Prune intra mode candidates based on source block histogram of gradient. // Applies to chroma plane only. // Feasible values are 0..4. The feature is disabled for 0. An increasing // value indicates more aggressive pruning threshold. int chroma_intra_pruning_with_hog; // Enable/disable smooth intra modes. int disable_smooth_intra; // Prune UV_SMOOTH_PRED mode for chroma based on chroma source variance. // false : No pruning // true : Prune UV_SMOOTH_PRED mode based on chroma source variance // // For allintra encode, this speed feature reduces instruction count // by 1.90%, 2.21% and 1.97% for speed 6, 7 and 8 with coding performance // change less than 0.04%. For AVIF image encode, this speed feature reduces // encode time by 1.56%, 2.14% and 0.90% for speed 6, 7 and 8 on a typical // image dataset with coding performance change less than 0.05%. bool prune_smooth_intra_mode_for_chroma; // Prune filter intra modes in intra frames. // 0 : No pruning // 1 : Evaluate applicable filter intra modes based on best intra mode so far // 2 : Do not evaluate filter intra modes int prune_filter_intra_level; // prune palette search // 0: No pruning // 1: Perform coarse search to prune the palette colors. For winner colors, // neighbors are also evaluated using a finer search. // 2: Perform 2 way palette search from max colors to min colors (and min // colors to remaining colors) and terminate the search if current number of // palette colors is not the winner. int prune_palette_search_level; // Terminate early in luma palette_size search. Speed feature values indicate // increasing level of pruning. // 0: No early termination // 1: Terminate early for higher luma palette_size, if header rd cost of lower // palette_size is more than 2 * best_rd. This level of pruning is more // conservative when compared to sf level 2 as the cases which will get pruned // with sf level 1 is a subset of the cases which will get pruned with sf // level 2. // 2: Terminate early for higher luma palette_size, if header rd cost of lower // palette_size is more than best_rd. // For allintra encode, this sf reduces instruction count by 2.49%, 1.07%, // 2.76%, 2.30%, 1.84%, 2.69%, 2.04%, 2.05% and 1.44% for speed 0, 1, 2, 3, 4, // 5, 6, 7 and 8 on screen content set with coding performance change less // than 0.01% for speed <= 2 and less than 0.03% for speed >= 3. For AVIF // image encode, this sf reduces instruction count by 1.94%, 1.13%, 1.29%, // 0.93%, 0.89%, 1.03%, 1.07%, 1.20% and 0.18% for speed 0, 1, 2, 3, 4, 5, 6, // 7 and 8 on a typical image dataset with coding performance change less than // 0.01%. int prune_luma_palette_size_search_level; // Prune chroma intra modes based on luma intra mode winner. // 0: No pruning // 1: Prune chroma intra modes other than UV_DC_PRED, UV_SMOOTH_PRED, // UV_CFL_PRED and the mode that corresponds to luma intra mode winner. int prune_chroma_modes_using_luma_winner; // Clip the frequency of updating the mv cost for intrabc. INTERNAL_COST_UPDATE_TYPE dv_cost_upd_level; // We use DCT_DCT transform followed by computing SATD (Sum of Absolute // Transformed Differences) as an estimation of RD score to quickly find the // best possible Chroma from Luma (CFL) parameter. Then we do a full RD search // near the best possible parameter. The search range is set here. // The range of cfl_searh_range should be [1, 33], and the following are the // recommended values. // 1: Fastest mode. // 3: Default mode that provides good speedup without losing compression // performance at speed 0. // 33: Exhaustive rd search (33 == CFL_MAGS_SIZE). This mode should only // be used for debugging purpose. int cfl_search_range; // TOP_INTRA_MODEL_COUNT is 4 that is the number of top model rd to store in // intra mode decision. Here, add a speed feature to reduce this number for // higher speeds. int top_intra_model_count_allowed; // Adapt top_intra_model_count_allowed locally to prune luma intra modes using // neighbor block and quantizer information. int adapt_top_model_rd_count_using_neighbors; // Prune the evaluation of odd delta angles of directional luma intra modes by // using the rdcosts of neighbouring delta angles. // For allintra encode, this speed feature reduces instruction count // by 4.461%, 3.699% and 3.536% for speed 6, 7 and 8 on a typical video // dataset with coding performance change less than 0.26%. For AVIF image // encode, this speed feature reduces encode time by 2.849%, 2.471%, // and 2.051% for speed 6, 7 and 8 on a typical image dataset with coding // performance change less than 0.27%. int prune_luma_odd_delta_angles_in_intra; // Terminate early in chroma palette_size search. // 0: No early termination // 1: Terminate early for higher palette_size, if header rd cost of lower // palette_size is more than best_rd. // For allintra encode, this sf reduces instruction count by 0.45%, // 0.62%, 1.73%, 2.50%, 2.89%, 3.09% and 3.86% for speed 0 to 6 on screen // content set with coding performance change less than 0.01%. // For AVIF image encode, this sf reduces instruction count by 0.45%, 0.81%, // 0.85%, 1.05%, 1.45%, 1.66% and 1.95% for speed 0 to 6 on a typical image // dataset with no quality drop. int early_term_chroma_palette_size_search; // Skips the evaluation of filter intra modes in inter frames if rd evaluation // of luma intra dc mode results in invalid rd stats. int skip_filter_intra_in_inter_frames; } INTRA_MODE_SPEED_FEATURES; typedef struct TX_SPEED_FEATURES { // Init search depth for square and rectangular transform partitions. // Values: // 0 - search full tree, 1: search 1 level, 2: search the highest level only int inter_tx_size_search_init_depth_sqr; int inter_tx_size_search_init_depth_rect; int intra_tx_size_search_init_depth_sqr; int intra_tx_size_search_init_depth_rect; // If any dimension of a coding block size above 64, always search the // largest transform only, since the largest transform block size is 64x64. int tx_size_search_lgr_block; TX_TYPE_SEARCH tx_type_search; // Skip split transform block partition when the collocated bigger block // is selected as all zero coefficients. int txb_split_cap; // Shortcut the transform block partition and type search when the target // rdcost is relatively lower. // Values are 0 (not used) , or 1 - 2 with progressively increasing // aggressiveness int adaptive_txb_search_level; // Prune level for tx_size_type search for inter based on rd model // 0: no pruning // 1-2: progressively increasing aggressiveness of pruning int model_based_prune_tx_search_level; // Refine TX type after fast TX search. int refine_fast_tx_search_results; // Prune transform split/no_split eval based on residual properties. A value // of 0 indicates no pruning, and the aggressiveness of pruning progressively // increases from levels 1 to 3. int prune_tx_size_level; // Prune the evaluation of transform depths as decided by the NN model. // false: No pruning. // true : Avoid the evaluation of specific transform depths using NN model. // // For allintra encode, this speed feature reduces instruction count // by 4.76%, 8.92% and 11.28% for speed 6, 7 and 8 with coding performance // change less than 0.32%. For AVIF image encode, this speed feature reduces // encode time by 4.65%, 9.16% and 10.45% for speed 6, 7 and 8 on a typical // image dataset with coding performance change less than 0.19%. bool prune_intra_tx_depths_using_nn; // Enable/disable early breakout during transform search of intra modes, by // using the minimum rd cost possible. By using this approach, the rd // evaluation of applicable transform blocks (in the current block) can be // avoided as // 1) best_rd evolves during the search in choose_tx_size_type_from_rd() // 2) appropriate ref_best_rd is passed in intra_block_yrd() // // For allintra encode, this speed feature reduces instruction count // by 1.11%, 1.08%, 1.02% and 0.93% for speed 3, 6, 7 and 8 with coding // performance change less than 0.02%. For AVIF image encode, this speed // feature reduces encode time by 0.93%, 1.46%, 1.07%, 0.84%, 0.99% and 0.73% // for speed 3, 4, 5, 6, 7 and 8 on a typical image dataset with coding // performance change less than 0.004%. bool use_rd_based_breakout_for_intra_tx_search; } TX_SPEED_FEATURES; typedef struct RD_CALC_SPEED_FEATURES { // Fast approximation of av1_model_rd_from_var_lapndz int simple_model_rd_from_var; // Perform faster distortion computation during the R-D evaluation by trying // to approximate the prediction error with transform coefficients (faster but // less accurate) rather than computing distortion in the pixel domain (slower // but more accurate). The following methods are used for distortion // computation: // Method 0: Always compute distortion in the pixel domain // Method 1: Based on block error, try using transform domain distortion for // tx_type search and compute distortion in pixel domain for final RD_STATS // Method 2: Based on block error, try to compute distortion in transform // domain // Methods 1 and 2 may fallback to computing distortion in the pixel domain in // case the block error is less than the threshold, which is controlled by the // speed feature tx_domain_dist_thres_level. // // The speed feature tx_domain_dist_level decides which of the above methods // needs to be used across different mode evaluation stages as described // below: // Eval type: Default Mode Winner // Level 0 : Method 0 Method 2 Method 0 // Level 1 : Method 1 Method 2 Method 0 // Level 2 : Method 2 Method 2 Method 0 // Level 3 : Method 2 Method 2 Method 2 int tx_domain_dist_level; // Transform domain distortion threshold level int tx_domain_dist_thres_level; // Trellis (dynamic programming) optimization of quantized values TRELLIS_OPT_TYPE optimize_coefficients; // Use hash table to store macroblock RD search results // to avoid repeated search on the same residue signal. int use_mb_rd_hash; // Flag used to control the extent of coeff R-D optimization int perform_coeff_opt; } RD_CALC_SPEED_FEATURES; typedef struct WINNER_MODE_SPEED_FEATURES { // Flag used to control the winner mode processing for better R-D optimization // of quantized coeffs int enable_winner_mode_for_coeff_opt; // Flag used to control the winner mode processing for transform size // search method int enable_winner_mode_for_tx_size_srch; // Control transform size search level // Eval type: Default Mode Winner // Level 0 : FULL RD LARGEST ALL FULL RD // Level 1 : FAST RD LARGEST ALL FULL RD // Level 2 : LARGEST ALL LARGEST ALL FULL RD // Level 3 : LARGEST ALL LARGEST ALL LARGEST ALL int tx_size_search_level; // Flag used to control the winner mode processing for use transform // domain distortion int enable_winner_mode_for_use_tx_domain_dist; // Flag used to enable processing of multiple winner modes MULTI_WINNER_MODE_TYPE multi_winner_mode_type; // Motion mode for winner candidates: // 0: speed feature OFF // 1 / 2 : Use configured number of winner candidates int motion_mode_for_winner_cand; // Controls the prediction of transform skip block or DC only block. // // Different speed feature values (0 to 3) decide the aggressiveness of // prediction (refer to predict_dc_levels[][] in speed_features.c) to be used // during different mode evaluation stages. int dc_blk_pred_level; // If on, disables interpolation filter search in handle_inter_mode loop, and // performs it during winner mode processing by \ref // tx_search_best_inter_candidates. int winner_mode_ifs; // Controls the disabling of winner mode processing. Speed feature levels // are ordered in increasing aggressiveness of pruning. The method considered // for disabling, depends on the sf level value and it is described as below. // 0: Do not disable // 1: Disable for blocks with low source variance. // 2: Disable for blocks which turn out to be transform skip (skipped based on // eob) during MODE_EVAL stage except NEWMV mode. // 3: Disable for blocks which turn out to be transform skip during MODE_EVAL // stage except NEWMV mode. For high quantizers, prune conservatively based on // transform skip (skipped based on eob) except for NEWMV mode. // 4: Disable for blocks which turn out to be transform skip during MODE_EVAL // stage. int prune_winner_mode_eval_level; } WINNER_MODE_SPEED_FEATURES; typedef struct LOOP_FILTER_SPEED_FEATURES { // This feature controls how the loop filter level is determined. LPF_PICK_METHOD lpf_pick; // Skip some final iterations in the determination of the best loop filter // level. int use_coarse_filter_level_search; // Control how the CDEF strength is determined. CDEF_PICK_METHOD cdef_pick_method; // Decoder side speed feature to add penalty for use of dual-sgr filters. // Takes values 0 - 10, 0 indicating no penalty and each additional level // adding a penalty of 1% int dual_sgr_penalty_level; // prune sgr ep using binary search like mechanism int enable_sgr_ep_pruning; // Disable loop restoration for Chroma plane int disable_loop_restoration_chroma; // Disable loop restoration for luma plane int disable_loop_restoration_luma; // Range of loop restoration unit sizes to search // The minimum size is clamped against the superblock size in // av1_pick_filter_restoration, so that the code which sets this value does // not need to know the superblock size ahead of time. int min_lr_unit_size; int max_lr_unit_size; // Prune RESTORE_WIENER evaluation based on source variance // 0 : no pruning // 1 : conservative pruning // 2 : aggressive pruning int prune_wiener_based_on_src_var; // Prune self-guided loop restoration based on wiener search results // 0 : no pruning // 1 : pruning based on rdcost ratio of RESTORE_WIENER and RESTORE_NONE // 2 : pruning based on winner restoration type among RESTORE_WIENER and // RESTORE_NONE int prune_sgr_based_on_wiener; // Reduce the wiener filter win size for luma int reduce_wiener_window_size; // Flag to disable Wiener Loop restoration filter. bool disable_wiener_filter; // Flag to disable Self-guided Loop restoration filter. bool disable_sgr_filter; // Disable the refinement search around the wiener filter coefficients. bool disable_wiener_coeff_refine_search; // Whether to downsample the rows in computation of wiener stats. int use_downsampled_wiener_stats; } LOOP_FILTER_SPEED_FEATURES; typedef struct REAL_TIME_SPEED_FEATURES { // check intra prediction for non-RD mode. int check_intra_pred_nonrd; // Skip checking intra prediction. // 0 - don't skip // 1 - skip if TX is skipped and best mode is not NEWMV // 2 - skip if TX is skipped // Skipping aggressiveness increases from level 1 to 2. int skip_intra_pred; // Estimate motion before calculating variance in variance-based partition // 0 - Only use zero MV // 1 - perform coarse ME // 2 - perform coarse ME, and also use neighbours' MVs // 3 - use neighbours' MVs without performing coarse ME int estimate_motion_for_var_based_partition; // For nonrd_use_partition: mode of extra check of leaf partition // 0 - don't check merge // 1 - always check merge // 2 - check merge and prune checking final split // 3 - check merge and prune checking final split based on bsize and qindex int nonrd_check_partition_merge_mode; // For nonrd_use_partition: check of leaf partition extra split int nonrd_check_partition_split; // Implements various heuristics to skip searching modes // The heuristics selected are based on flags // defined in the MODE_SEARCH_SKIP_HEURISTICS enum unsigned int mode_search_skip_flags; // For nonrd: Reduces ref frame search. // 0 - low level of search prune in non last frames // 1 - pruned search in non last frames // 2 - more pruned search in non last frames int nonrd_prune_ref_frame_search; // This flag controls the use of non-RD mode decision. int use_nonrd_pick_mode; // Use ALTREF frame in non-RD mode decision. int use_nonrd_altref_frame; // Use compound reference for non-RD mode. int use_comp_ref_nonrd; // Reference frames for compound prediction for nonrd pickmode: // LAST_GOLDEN (0), LAST_LAST2 (1), or LAST_ALTREF (2). int ref_frame_comp_nonrd[3]; // use reduced ref set for real-time mode int use_real_time_ref_set; // Skip a number of expensive mode evaluations for blocks with very low // temporal variance. int short_circuit_low_temp_var; // Reuse inter prediction in fast non-rd mode. int reuse_inter_pred_nonrd; // Number of best inter modes to search transform. INT_MAX - search all. int num_inter_modes_for_tx_search; // Use interpolation filter search in non-RD mode decision. int use_nonrd_filter_search; // Use simplified RD model for interpolation search and Intra int use_simple_rd_model; // For nonrd mode: use hybrid intra mode search for intra only frames based on // block properties. // 0 : use nonrd pick intra for all blocks // 1 : use rd for bsize < 16x16, nonrd otherwise // 2 : use rd for bsize < 16x16 and src var >= 101, nonrd otherwise int hybrid_intra_pickmode; // Compute variance/sse on source difference, prior to encoding superblock. int source_metrics_sb_nonrd; // Flag to indicate process for handling overshoot on slide/scene change, // for real-time CBR mode. OVERSHOOT_DETECTION_CBR overshoot_detection_cbr; // Check for scene/content change detection on every frame before encoding. int check_scene_detection; // For nonrd mode: Prefer larger partition blks in variance based partitioning // 0: disabled, 1-3: increasing aggressiveness int prefer_large_partition_blocks; // uses results of temporal noise estimate int use_temporal_noise_estimate; // Parameter indicating initial search window to be used in full-pixel search // for nonrd_pickmode. Range [0, MAX_MVSEARCH_STEPS - 1]. Lower value // indicates larger window. If set to 0, step_param is set based on internal // logic in set_mv_search_params(). int fullpel_search_step_param; // Bit mask to enable or disable intra modes for each prediction block size // separately, for nonrd_pickmode. Currently, the sf is not respected when // 'force_intra_check' is true in 'av1_estimate_intra_mode()' function. Also, // H and V pred modes allowed through this sf can be further pruned when //'prune_hv_pred_modes_using_src_sad' sf is true. int intra_y_mode_bsize_mask_nrd[BLOCK_SIZES]; // Prune H and V intra predition modes evalution in inter frame. // The sf does not have any impact. // i. when frame_source_sad is 1.1 times greater than avg_source_sad // ii. when cyclic_refresh_segment_id_boosted is enabled // iii. when SB level source sad is greater than kMedSad // iv. when color sensitivity is non zero for both the chroma channels bool prune_hv_pred_modes_using_src_sad; // Skips mode checks more aggressively in nonRD mode int nonrd_aggressive_skip; // Skip cdef on 64x64 blocks/ // 0: disabled // 1: skip when NEWMV or INTRA is not picked or color sensitivity is off. // When color sensitivity is on for a superblock, all 64x64 blocks within // will not skip. // 2: more aggressive mode where skip is done for all frames where // rc->high_source_sad = 0 (non slide-changes), and color sensitivity off. int skip_cdef_sb; // Force selective cdf update. int selective_cdf_update; // Force only single reference (LAST) for prediction. int force_only_last_ref; // Forces larger partition blocks in variance based partitioning for intra // frames int force_large_partition_blocks_intra; // Use fixed partition for superblocks based on source_sad. // 0: disabled // 1: enabled int use_fast_fixed_part; // Increase source_sad thresholds in nonrd pickmode. int increase_source_sad_thresh; // Skip evaluation of no split in tx size selection for merge partition int skip_tx_no_split_var_based_partition; // Intermediate termination of newMV mode evaluation based on so far best mode // sse int skip_newmv_mode_based_on_sse; // Define gf length multiplier. // Level 0: use large multiplier, level 1: use medium multiplier. int gf_length_lvl; // Prune inter modes with golden frame as reference for NEARMV and NEWMV modes int prune_inter_modes_with_golden_ref; // Prune inter modes w.r.t golden or alt-ref frame based on sad int prune_inter_modes_wrt_gf_arf_based_on_sad; // Prune inter mode search in rd path based on current block's temporal // variance wrt LAST reference. int prune_inter_modes_using_temp_var; // Reduce MV precision to halfpel for higher int MV value & frame-level motion // 0: disabled // 1-2: Reduce precision to halfpel, fullpel based on conservative // thresholds, aggressiveness increases with increase in level // 3: Reduce precision to halfpel using more aggressive thresholds int reduce_mv_pel_precision_highmotion; // Reduce MV precision for low complexity blocks // 0: disabled // 1: Reduce the mv resolution for zero mv if the variance is low // 2: Switch to halfpel, fullpel based on low block spatial-temporal // complexity. int reduce_mv_pel_precision_lowcomplex; // Prune intra mode evaluation in inter frames based on mv range. BLOCK_SIZE prune_intra_mode_based_on_mv_range; // The number of times to left shift the splitting thresholds in variance // based partitioning. The minimum values should be 7 to avoid left shifting // by a negative number. int var_part_split_threshold_shift; // Qindex based variance partition threshold index, which determines // the aggressiveness of partition pruning // 0: disabled for speeds 9,10 // 1,2: (rd-path) lowers qindex thresholds conditionally (for low SAD sb) // 3,4: (non-rd path) uses pre-tuned qindex thresholds int var_part_based_on_qidx; // Enable GF refresh based on Q value. int gf_refresh_based_on_qp; // Temporal filtering // The value can be 1 or 2, which indicates the threshold to use. // Must be off for lossless mode. int use_rtc_tf; // Prune the use of the identity transform in nonrd_pickmode, // used for screen content mode: only for smaller blocks // and higher spatial variance, and when skip_txfm is not // already set. int prune_idtx_nonrd; // Prune the use of paletter mode in nonrd pickmode. int prune_palette_nonrd; // Force to only use dct for palette search in nonrd pickmode. int dct_only_palette_nonrd; // Skip loopfilter, for static content after slide change // or key frame, once quality has ramped up. // 0: disabled // 1: skip only after quality is ramped up. // 2: aggrssive mode, where skip is done for all frames that // where rc->high_source_sad = 0 (no slide-changes). int skip_lf_screen; // For nonrd: early exit out of variance partition that sets the // block size to superblock size, and sets mode to zeromv-last skip. // 0: disabled // 1: zeromv-skip is enabled at SB level only // 2: zeromv-skip is enabled at SB level and coding block level int part_early_exit_zeromv; // Early terminate inter mode search based on sse in non-rd path. INTER_SEARCH_EARLY_TERM_IDX sse_early_term_inter_search; // SAD based adaptive altref selection int sad_based_adp_altref_lag; // Enable/disable partition direct merging. int partition_direct_merging; // Level of aggressiveness for obtaining tx size based on qstep int tx_size_level_based_on_qstep; // Avoid the partitioning of a 16x16 block in variance based partitioning // (VBP) by making use of minimum and maximum sub-block variances. // For allintra encode, this speed feature reduces instruction count by 5.39% // for speed 9 on a typical video dataset with coding performance gain // of 1.44%. // For AVIF image encode, this speed feature reduces encode time // by 8.44% for speed 9 on a typical image dataset with coding performance // gain of 0.78%. bool vbp_prune_16x16_split_using_min_max_sub_blk_var; // A qindex threshold that determines whether to use qindex based CDEF filter // strength estimation for screen content types. The strength estimation model // used for screen contents prefers to allow cdef filtering for more frames. // This sf is used to limit the frames which go through cdef filtering and // following explains the setting of the same. // MAXQ (255): This disables the usage of this sf. Here, frame does not use a // screen content model thus reduces the number of frames that go through cdef // filtering. // MINQ (0): Frames always use screen content model thus increasing the number // of frames that go through cdef filtering. // This speed feature has a substantial gain on coding metrics, with moderate // increase encoding time. Select threshold based on speed vs quality // trade-off. int screen_content_cdef_filter_qindex_thresh; // Prune compound mode if its variance is higher than the variance of single // modes. bool prune_compoundmode_with_singlecompound_var; // Allow mode cost update at frame level every couple frames. This // overrides the command line setting --mode-cost-upd-freq=3 (never update // except on key frame and first delta). bool frame_level_mode_cost_update; // Prune H_PRED during intra mode evaluation in the nonrd path based on best // mode so far. // // For allintra encode, this speed feature reduces instruction count by 1.10% // for speed 9 with coding performance change less than 0.04%. // For AVIF image encode, this speed feature reduces encode time by 1.03% for // speed 9 on a typical image dataset with coding performance change less than // 0.08%. bool prune_h_pred_using_best_mode_so_far; // Enable pruning of intra mode evaluations in nonrd path based on source // variance and best mode so far. The pruning logic is enabled only if the // mode is not a winner mode of both the neighboring blocks (left/top). // // For allintra encode, this speed feature reduces instruction count by 3.96% // for speed 9 with coding performance change less than 0.38%. // For AVIF image encode, this speed feature reduces encode time by 3.46% for // speed 9 on a typical image dataset with coding performance change less than // -0.06%. bool enable_intra_mode_pruning_using_neighbors; // Prune intra mode evaluations in nonrd path based on best sad so far. // // For allintra encode, this speed feature reduces instruction count by 3.05% // for speed 9 with coding performance change less than 0.24%. // For AVIF image encode, this speed feature reduces encode time by 1.87% for // speed 9 on a typical image dataset with coding performance change less than // 0.16%. bool prune_intra_mode_using_best_sad_so_far; // If compound is enabled, and the current block size is \geq BLOCK_16X16, // limit the compound modes to GLOBAL_GLOBALMV. This does not apply to the // base layer of svc. bool check_only_zero_zeromv_on_large_blocks; // Allow for disabling cdf update for non reference frames in svc mode. bool disable_cdf_update_non_reference_frame; // Prune compound modes if the single modes variances do not perform well. bool prune_compoundmode_with_singlemode_var; // Skip searching all compound mode if the variance of single_mode residue is // sufficiently low. bool skip_compound_based_on_var; // Sets force_zeromv_skip based on the source sad available. Aggressiveness // increases with increase in the level set for speed feature. // 0: No setting // 1: If source sad is kZeroSad // 2: If source sad <= kVeryLowSad int set_zeromv_skip_based_on_source_sad; // Downgrades the block-level subpel motion search to // av1_find_best_sub_pixel_tree_pruned_more for higher QP and when fullpel // search performed well, zeromv has low sad or low source_var bool use_adaptive_subpel_search; // A flag used in RTC case to control frame_refs_short_signaling. Note that // the final decision is made in check_frame_refs_short_signaling(). The flag // can only be turned on when res < 360p and speed >= 9, in which case only // LAST and GOLDEN ref frames are used now. bool enable_ref_short_signaling; // A flag that controls if we check or bypass GLOBALMV in rtc single ref frame // case. bool check_globalmv_on_single_ref; // Allows for increasing the color_threshold for palette prediction. // This generally leads to better coding efficiency but with some speed loss. // Only used for screen content and for nonrd_pickmode. bool increase_color_thresh_palette; } REAL_TIME_SPEED_FEATURES; /*!\endcond */ /*! * \brief Top level speed vs quality trade off data struture. */ typedef struct SPEED_FEATURES { /*! * Sequence/frame level speed features: */ HIGH_LEVEL_SPEED_FEATURES hl_sf; /*! * Speed features for the first pass. */ FIRST_PASS_SPEED_FEATURES fp_sf; /*! * Speed features related to how tpl's searches are done. */ TPL_SPEED_FEATURES tpl_sf; /*! * Global motion speed features: */ GLOBAL_MOTION_SPEED_FEATURES gm_sf; /*! * Partition search speed features: */ PARTITION_SPEED_FEATURES part_sf; /*! * Motion search speed features: */ MV_SPEED_FEATURES mv_sf; /*! * Inter mode search speed features: */ INTER_MODE_SPEED_FEATURES inter_sf; /*! * Interpolation filter search speed features: */ INTERP_FILTER_SPEED_FEATURES interp_sf; /*! * Intra mode search speed features: */ INTRA_MODE_SPEED_FEATURES intra_sf; /*! * Transform size/type search speed features: */ TX_SPEED_FEATURES tx_sf; /*! * RD calculation speed features: */ RD_CALC_SPEED_FEATURES rd_sf; /*! * Two-pass mode evaluation features: */ WINNER_MODE_SPEED_FEATURES winner_mode_sf; /*! * In-loop filter speed features: */ LOOP_FILTER_SPEED_FEATURES lpf_sf; /*! * Real-time mode speed features: */ REAL_TIME_SPEED_FEATURES rt_sf; } SPEED_FEATURES; /*!\cond */ struct AV1_COMP; /*!\endcond */ /*!\brief Frame size independent speed vs quality trade off flags * *\ingroup speed_features * * \param[in] cpi Top - level encoder instance structure * \param[in] speed Speed setting passed in from the command line * * \remark No return value but configures the various speed trade off flags * based on the passed in speed setting. (Higher speed gives lower * quality) */ void av1_set_speed_features_framesize_independent(struct AV1_COMP *cpi, int speed); /*!\brief Frame size dependent speed vs quality trade off flags * *\ingroup speed_features * * \param[in] cpi Top - level encoder instance structure * \param[in] speed Speed setting passed in from the command line * * \remark No return value but configures the various speed trade off flags * based on the passed in speed setting and frame size. (Higher speed * corresponds to lower quality) */ void av1_set_speed_features_framesize_dependent(struct AV1_COMP *cpi, int speed); /*!\brief Q index dependent speed vs quality trade off flags * *\ingroup speed_features * * \param[in] cpi Top - level encoder instance structure * \param[in] speed Speed setting passed in from the command line * * \remark No return value but configures the various speed trade off flags * based on the passed in speed setting and current frame's Q index. * (Higher speed corresponds to lower quality) */ void av1_set_speed_features_qindex_dependent(struct AV1_COMP *cpi, int speed); #ifdef __cplusplus } // extern "C" #endif #endif // AOM_AV1_ENCODER_SPEED_FEATURES_H_