Adding upstream version 20240610.upstream/20240610upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 88 deletions

diff --git a/carl9170fw/carlfw/include/timer.h b/carl9170fw/carlfw/include/timer.h
deleted file mode 100644
index 1c1c6cd..0000000
--- a/carl9170fw/carlfw/include/timer.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * carl9170 firmware - used by the ar9170 wireless device
- *
- * Clock, Timer & Timing
- *
- * Copyright (c) 2000-2005 ZyDAS Technology Corporation
- * Copyright (c) 2007-2009 Atheros Communications, Inc.
- * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __CARL9170FW_TIMER_H
-#define __CARL9170FW_TIMER_H
-
-#include "config.h"
-
-enum cpu_clock_t {
-	AHB_40MHZ_OSC   = 0,
-	AHB_20_22MHZ    = 1,
-	AHB_40_44MHZ    = 2,
-	AHB_80_88MHZ    = 3
-};
-
-static inline __inline uint32_t get_clock_counter(void)
-{
-	return (get(AR9170_TIMER_REG_CLOCK_HIGH) << 16) | get(AR9170_TIMER_REG_CLOCK_LOW);
-}
-
-/*
- * works only up to 97 secs [44 MHz] or 107 secs for 40 MHz
- * Also, the delay wait will be affected by 2.4GHz<->5GHz
- * band changes.
- */
-static inline __inline bool is_after_msecs(const uint32_t t0, const uint32_t msecs)
-{
-	return ((get_clock_counter() - t0) / 1000) > (msecs * fw.ticks_per_usec);
-}
-
-/*
- * Note: Be careful with [u]delay. They won't service the
- * hardware watchdog timer. It might trigger if you
- * wait long enough. Also they don't terminate if sec is
- * above 97 sec [44MHz] or more than 107 sec [40MHz].
- */
-static inline __inline void delay(const uint32_t msec)
-{
-	uint32_t t1, t2, dt, wt;
-
-	wt = msec * fw.ticks_per_usec;
-
-	t1 = get_clock_counter();
-	while (1) {
-		t2 = get_clock_counter();
-		dt = (t2 - t1) / 1000;
-		if (dt >= wt)
-			break;
-	}
-}
-
-static inline __inline void udelay(const uint32_t usec)
-{
-	uint32_t t1, t2, dt;
-
-	t1 = get_clock_counter();
-	while (1) {
-		t2 = get_clock_counter();
-		dt = (t2 - t1);
-		if (dt >= (usec * fw.ticks_per_usec))
-			break;
-	}
-}
-
-void clock_set(enum cpu_clock_t _clock, bool on);
-#endif /* __CARL9170FW_TIMER_H */