Adding upstream version 20240709.upstream/20240709upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 432 deletions

diff --git a/carl9170fw/carlfw/usb/main.c b/carl9170fw/carlfw/usb/main.c
deleted file mode 100644
index 890970c..0000000
--- a/carl9170fw/carlfw/usb/main.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * carl9170 firmware - used by the ar9170 wireless device
- *
- * Copyright (c) 2000-2005 ZyDAS Technology Corporation
- * Copyright (c) 2007-2009 Atheros Communications, Inc.
- * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "carl9170.h"
-
-#include "shared/phy.h"
-#include "hostif.h"
-#include "printf.h"
-#include "timer.h"
-#include "rom.h"
-#include "wl.h"
-#include "wol.h"
-
-#ifdef CONFIG_CARL9170FW_DEBUG_USB
-void usb_putc(const char c)
-{
-	fw.usb.put_buffer[fw.usb.put_index++] = (uint8_t) c;
-
-	if (fw.usb.put_index == CARL9170_MAX_CMD_PAYLOAD_LEN || c == '\0') {
-		fw.usb.put_buffer[fw.usb.put_index] = 0;
-
-		send_cmd_to_host(__roundup(fw.usb.put_index, 4),
-				 CARL9170_RSP_TEXT, fw.usb.put_index,
-				 fw.usb.put_buffer);
-		fw.usb.put_index = 0;
-	}
-}
-
-void usb_print_hex_dump(const void *buf, int len)
-{
-	unsigned int offset = 0, block = 0;
-	while (len > 0) {
-		block = min(__roundup(len, 4), CARL9170_MAX_CMD_PAYLOAD_LEN);
-
-		send_cmd_to_host(block, CARL9170_RSP_HEXDUMP, len,
-				 (const uint8_t *) buf + offset);
-
-		offset += block;
-		len -= block;
-	}
-}
-#endif /* CONFIG_CARL9170FW_DEBUG_USB */
-
-/* grab a buffer from the interrupt in queue ring-buffer */
-static struct carl9170_rsp *get_int_buf(void)
-{
-	struct carl9170_rsp *tmp;
-
-	/* fetch the _oldest_ buffer from the ring */
-	tmp = &fw.usb.int_buf[fw.usb.int_tail_index];
-
-	/* assign a unique sequence for every response/trap */
-	tmp->hdr.seq = fw.usb.int_tail_index;
-
-	fw.usb.int_tail_index++;
-
-	fw.usb.int_tail_index %= CARL9170_INT_RQ_CACHES;
-	if (fw.usb.int_pending != CARL9170_INT_RQ_CACHES)
-		fw.usb.int_pending++;
-
-	return tmp;
-}
-
-/* Pop up data from Interrupt IN Queue to USB Response buffer */
-static struct carl9170_rsp *dequeue_int_buf(unsigned int space)
-{
-	struct carl9170_rsp *tmp = NULL;
-
-	if (fw.usb.int_pending > 0) {
-		tmp = &fw.usb.int_buf[fw.usb.int_head_index];
-
-		if ((unsigned int)(tmp->hdr.len + 8) > space)
-			return NULL;
-
-		fw.usb.int_head_index++;
-		fw.usb.int_head_index %= CARL9170_INT_RQ_CACHES;
-		fw.usb.int_pending--;
-	}
-
-	return tmp;
-}
-
-static void usb_data_in(void)
-{
-}
-
-static void usb_reg_out(void)
-{
-	uint32_t *regaddr = (uint32_t *) &dma_mem.reserved.cmd;
-	uint16_t usbfifolen, i;
-
-	usb_reset_out();
-
-	usbfifolen = getb(AR9170_USB_REG_EP4_BYTE_COUNT_LOW) |
-		     getb(AR9170_USB_REG_EP4_BYTE_COUNT_HIGH) << 8;
-
-	if (usbfifolen & 0x3)
-		usbfifolen = (usbfifolen >> 2) + 1;
-	else
-		usbfifolen = usbfifolen >> 2;
-
-	for (i = 0; i < usbfifolen; i++)
-		*regaddr++ = get(AR9170_USB_REG_EP4_DATA);
-
-	handle_cmd(get_int_buf());
-
-	usb_trigger_in();
-}
-
-static void usb_status_in(void)
-{
-	struct carl9170_rsp *rsp;
-	unsigned int rem, tlen, elen;
-
-	if (!fw.usb.int_desc_available)
-		return ;
-
-	fw.usb.int_desc_available = 0;
-
-	rem = AR9170_BLOCK_SIZE - AR9170_INT_MAGIC_HEADER_SIZE;
-	tlen = AR9170_INT_MAGIC_HEADER_SIZE;
-
-	usb_reset_in();
-
-	while (fw.usb.int_pending) {
-		rsp = dequeue_int_buf(rem);
-		if (!rsp)
-			break;
-
-		elen = rsp->hdr.len + 4;
-
-		memcpy(DESC_PAYLOAD_OFF(fw.usb.int_desc, tlen), rsp, elen);
-
-		rem -= elen;
-		tlen += elen;
-	}
-
-	if (tlen == AR9170_INT_MAGIC_HEADER_SIZE) {
-		DBG("attempted to send an empty int response!\n");
-		goto reclaim;
-	}
-
-	fw.usb.int_desc->ctrl = AR9170_CTRL_FS_BIT | AR9170_CTRL_LS_BIT;
-	fw.usb.int_desc->totalLen = tlen;
-	fw.usb.int_desc->dataSize = tlen;
-
-	/* Put to UpQ */
-	dma_put(&fw.pta.up_queue, fw.usb.int_desc);
-
-	/* Trigger PTA UP DMA */
-	set(AR9170_PTA_REG_UP_DMA_TRIGGER, 1);
-	usb_trigger_out();
-
-	return ;
-
-reclaim:
-	/* TODO: not sure what to do here */
-	fw.usb.int_desc_available = 1;
-}
-
-void send_cmd_to_host(const uint8_t len, const uint8_t type,
-		      const uint8_t ext, const uint8_t *body)
-{
-	struct carl9170_cmd *resp;
-
-#ifdef CONFIG_CARL9170FW_DEBUG
-	if (unlikely(len > sizeof(resp->data))) {
-		DBG("CMD too long:%x %d\n", type, len);
-		return ;
-	}
-
-	/* Element length must be a multiple of 4. */
-	if (unlikely(len & 0x3)) {
-		DBG("CMD length not mult. of 4:%x %d\n", type, len);
-		return ;
-	}
-#endif /* CONFIG_CARL9170FW_DEBUG */
-
-	resp = (struct carl9170_cmd *) get_int_buf();
-	if (unlikely(resp == NULL)) {
-		/* not very helpful for NON UART users */
-		DBG("out of msg buffers\n");
-		return ;
-	}
-
-	resp->hdr.len = len;
-	resp->hdr.cmd = type;
-	resp->hdr.ext = ext;
-
-	memcpy(resp->data, body, len);
-	usb_trigger_in();
-}
-
-/* Turn off ADDA/RF power, PLL */
-static void turn_power_off(void)
-{
-	set(AR9170_PHY_REG_ACTIVE, AR9170_PHY_ACTIVE_DIS);
-	set(AR9170_PHY_REG_ADC_CTL, 0xa0000000 |
-	    AR9170_PHY_ADC_CTL_OFF_PWDADC | AR9170_PHY_ADC_CTL_OFF_PWDDAC);
-
-	/* This will also turn-off the LEDs */
-	set(AR9170_GPIO_REG_PORT_DATA, 0);
-	set(AR9170_GPIO_REG_PORT_TYPE, 0xf);
-
-	set(AR9170_PWR_REG_BASE, 0x40021);
-
-	set(AR9170_MAC_REG_DMA_TRIGGER, 0);
-
-	andl(AR9170_USB_REG_DMA_CTL, ~(AR9170_USB_DMA_CTL_ENABLE_TO_DEVICE |
-				       AR9170_USB_DMA_CTL_ENABLE_FROM_DEVICE |
-				       AR9170_USB_DMA_CTL_UP_PACKET_MODE |
-				       AR9170_USB_DMA_CTL_DOWN_STREAM));
-
-	/* Do a software reset to PTA component */
-	orl(AR9170_PTA_REG_DMA_MODE_CTRL, AR9170_PTA_DMA_MODE_CTRL_RESET);
-	andl(AR9170_PTA_REG_DMA_MODE_CTRL, ~AR9170_PTA_DMA_MODE_CTRL_RESET);
-
-	orl(AR9170_PTA_REG_DMA_MODE_CTRL, AR9170_PTA_DMA_MODE_CTRL_DISABLE_USB);
-
-	set(AR9170_MAC_REG_POWER_STATE_CTRL,
-	    AR9170_MAC_POWER_STATE_CTRL_RESET);
-
-	/* Reset USB FIFO */
-	set(AR9170_PWR_REG_RESET, AR9170_PWR_RESET_COMMIT_RESET_MASK |
-				  AR9170_PWR_RESET_DMA_MASK |
-				  AR9170_PWR_RESET_WLAN_MASK);
-	set(AR9170_PWR_REG_RESET, 0x0);
-
-	clock_set(AHB_20_22MHZ, false);
-
-	set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);	/* 0x502b; */
-	set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_EXTERNAL_RADIO);
-	set(0x1c589c, 0);	/* 7-0 */
-	set(0x1c589c, 0);	/* 15-8 */
-	set(0x1c589c, 0);	/* 23-16 */
-	set(0x1c589c, 0);	/* 31- */
-	set(0x1c589c, 0);	/* 39- */
-	set(0x1c589c, 0);	/* 47- */
-	set(0x1c589c, 0);	/* 55- */
-	set(0x1c589c, 0xf8);	/* 63- */
-	set(0x1c589c, 0x27);	/* 0x24;	71-	modified */
-	set(0x1c589c, 0xf9);	/* 79- */
-	set(0x1c589c, 0x90);	/* 87- */
-	set(0x1c589c, 0x04);	/* 95- */
-	set(0x1c589c, 0x48);	/* 103- */
-	set(0x1c589c, 0x19);	/* 0;		111-	modified */
-	set(0x1c589c, 0);	/* 119- */
-	set(0x1c589c, 0);	/* 127- */
-	set(0x1c589c, 0);	/* 135- */
-	set(0x1c589c, 0);	/* 143- */
-	set(0x1c589c, 0);	/* 151- */
-	set(0x1c589c, 0x70);	/* 159- */
-	set(0x1c589c, 0x0c);	/* 167- */
-	set(0x1c589c, 0);	/* 175- */
-	set(0x1c589c, 0);	/* 183-176 */
-	set(0x1c589c, 0);	/* 191-184 */
-	set(0x1c589c, 0);	/* 199- */
-	set(0x1c589c, 0);	/* 207- */
-	set(0x1c589c, 0);	/* 215- */
-	set(0x1c589c, 0);	/* 223- */
-	set(0x1c589c, 0);	/* 231- */
-	set(0x1c58c4, 0);	/* 233- 232 */
-	set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_INTERNAL_ADDAC);
-}
-
-static void disable_watchdog(void)
-{
-	if (!fw.watchdog_enable)
-		return;
-
-	/* write watchdog magic pattern for suspend  */
-	andl(AR9170_PWR_REG_WATCH_DOG_MAGIC, 0xffff);
-	orl(AR9170_PWR_REG_WATCH_DOG_MAGIC, 0x98760000);
-
-	/* Disable watchdog */
-	set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-}
-
-void __noreturn reboot(void)
-{
-	disable_watchdog();
-
-	/* Turn off power */
-	turn_power_off();
-
-	/* clean bootloader workspace */
-	memset(&dma_mem, 0, sizeof(dma_mem));
-
-	/* add by ygwei for work around USB PHY chirp sequence problem */
-	set(0x10f100, 0x12345678);
-
-	/* Jump to boot code */
-	jump_to_bootcode();
-}
-
-/* service USB events and re-enable USB interrupt */
-static void usb_handler(uint8_t usb_interrupt_level1)
-{
-	uint8_t usb_interrupt_level2;
-
-	if (usb_interrupt_level1 & BIT(5))
-		usb_data_in();
-
-	if (usb_interrupt_level1 & BIT(4))
-		usb_reg_out();
-
-	if (usb_interrupt_level1 & BIT(6))
-		usb_status_in();
-
-	if (usb_interrupt_level1 & BIT(0)) {
-		usb_interrupt_level2 = getb(AR9170_USB_REG_INTR_SOURCE_0);
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_SETUP)
-			usb_ep0setup();
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_IN)
-			usb_ep0tx();
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_OUT)
-			usb_ep0rx();
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_ABORT) {
-			/* Clear the command abort interrupt */
-			andb(AR9170_USB_REG_INTR_SOURCE_0, (uint8_t)
-			     ~AR9170_USB_INTR_SRC0_ABORT);
-		}
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_FAIL ||
-		    fw.usb.ep0_action & CARL9170_EP0_STALL) {
-			/*
-			 * transmission failure.
-			 * stall ep 0
-			 */
-			setb(AR9170_USB_REG_CX_CONFIG_STATUS, BIT(2));
-			fw.usb.ep0_action &= ~CARL9170_EP0_STALL;
-		}
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_END ||
-		    fw.usb.ep0_action & CARL9170_EP0_TRIGGER) {
-			/*
-			 * transmission done.
-			 * set DONE bit.
-			 */
-			setb(AR9170_USB_REG_CX_CONFIG_STATUS, BIT(0));
-			fw.usb.ep0_action &= ~CARL9170_EP0_TRIGGER;
-		}
-	}
-
-	if (usb_interrupt_level1 & BIT(7)) {
-		usb_interrupt_level2 = getb(AR9170_USB_REG_INTR_SOURCE_7);
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_RX0BYTE)
-			usb_data_out0Byte();
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_TX0BYTE)
-			usb_data_in0Byte();
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_RESET) {
-			usb_reset_ack();
-			reboot();
-		}
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_SUSPEND) {
-			usb_suspend_ack();
-
-			fw.suspend_mode = CARL9170_HOST_SUSPENDED;
-
-#ifdef CONFIG_CARL9170FW_WOL
-			if (!(fw.usb.device_feature & USB_DEVICE_REMOTE_WAKEUP) ||
-			    !fw.wol.cmd.flags) {
-				disable_watchdog();
-
-				/* GO_TO_SUSPEND stops the CPU clock too. */
-				orb(AR9170_USB_REG_MAIN_CTRL, AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND);
-			} else {
-				wol_prepare();
-			}
-#else /* CONFIG_CARL9170FW_WOL */
-			disable_watchdog();
-
-			/* GO_TO_SUSPEND stops the CPU clock too. */
-			orb(AR9170_USB_REG_MAIN_CTRL, AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND);
-#endif /* CONFIG_CARL9170FW_WOL */
-		}
-
-		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_RESUME) {
-			usb_resume_ack();
-
-			fw.suspend_mode = CARL9170_HOST_AWAKE;
-			set(AR9170_USB_REG_WAKE_UP, 0);
-
-			reboot();
-		}
-	}
-}
-
-void handle_usb(void)
-{
-	uint8_t usb_interrupt_level1;
-
-	usb_interrupt_level1 = getb(AR9170_USB_REG_INTR_GROUP);
-
-	if (usb_interrupt_level1)
-		usb_handler(usb_interrupt_level1);
-
-	if (fw.usb.int_pending > 0)
-		usb_trigger_in();
-}
-
-void usb_timer(void)
-{
-}