1 files changed, 59 insertions, 0 deletions
diff --git a/carl9170fw/carlfw/carl9170.lds b/carl9170fw/carlfw/carl9170.lds
new file mode 100644
index 0000000..97dda68
--- /dev/null
+++ b/carl9170fw/carlfw/carl9170.lds
@@ -0,0 +1,59 @@
+/*
+ * The carl9170 firwmare gets copied into the device's
+ * Program RAM (pram), which has a size of 16K, but
+ * also has to accomodate the stack the device uses,
+ * which starts at the top of the 16k, so we pretend
+ * that we just have 16256 (16k - 128) of pram.
+ *
+ * This section documents some of the other areas
+ * mapped into the firmware processor's address space
+ * as well.
+ */
+
+ENTRY(_start);
+
+MEMORY
+{
+    eeprom   : ORIGIN = 0x000000, LENGTH = 1024k
+    sram     : ORIGIN = 0x100000, LENGTH = 96k
+    uart     : ORIGIN = 0x1c0000, LENGTH = 4k
+    timer    : ORIGIN = 0x1c1000, LENGTH = 4k
+    vflash   : ORIGIN = 0x1c2000, LENGTH = 4k
+    wlan     : ORIGIN = 0x1c3000, LENGTH = 4k
+    pci2ahb  : ORIGIN = 0x1c4000, LENGTH = 4k
+    security : ORIGIN = 0x1c5000, LENGTH = 4k
+    gpio     : ORIGIN = 0x1d0000, LENGTH = 4k
+    memctl   : ORIGIN = 0x1d1000, LENGTH = 4k
+    irqctl   : ORIGIN = 0x1d2000, LENGTH = 4k
+    usb      : ORIGIN = 0x1e1000, LENGTH = 4k
+    pta      : ORIGIN = 0x1e2000, LENGTH = 4k
+    pram     : ORIGIN = 0x200000, LENGTH = 16256
+    bogus    : ORIGIN = 0x300000, LENGTH = 8k
+}
+
+SECTIONS
+{
+	.eeprom : { *(.eeprom*) } > eeprom
+	.sram	: { *(.sram*) } > sram
+
+	/*
+	 * The ar9170 boot code will execute the code
+	 * at address 0x04 from the loaded firmware as
+	 * such we must ensure our starting routine
+	 * is kept at that address.
+	 */
+	.padding : {
+		/* NOP NOP just in case */
+		LONG(0x00090009)
+	} > pram
+
+	.boot     : { *(.boot) } > pram
+	/* anything else can be anywhere */
+
+	.text	: { *(.text*) } > pram
+	.rodata	: { *(.rodata*) } > pram
+	.bss	: { *(.bss) } > pram
+	.data	: { *(.data*) } > pram
+
+	.fwdsc	: { KEEP(*(.fwdsc)) } > bogus
+}