summaryrefslogtreecommitdiffstats
path: root/carl9170fw/carlfw/src/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'carl9170fw/carlfw/src/dma.c')
-rw-r--r--carl9170fw/carlfw/src/dma.c255
1 files changed, 255 insertions, 0 deletions
diff --git a/carl9170fw/carlfw/src/dma.c b/carl9170fw/carlfw/src/dma.c
new file mode 100644
index 0000000..9b83fcf
--- /dev/null
+++ b/carl9170fw/carlfw/src/dma.c
@@ -0,0 +1,255 @@
+/*
+ * carl9170 firmware - used by the ar9170 wireless device
+ *
+ * DMA descriptor handling functions
+ *
+ * Copyright (c) 2000-2005 ZyDAS Technology Corporation
+ * Copyright (c) 2007-2009 Atheros Communications, Inc.
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009-2011 Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "carl9170.h"
+#include "wl.h"
+#include "printf.h"
+
+struct ar9170_dma_memory dma_mem __section(sram);
+
+static void copy_dma_desc(struct dma_desc *dst,
+ struct dma_desc *src)
+{
+ memcpy(dst, src, sizeof(struct dma_desc));
+}
+
+static void clear_descriptor(struct dma_desc *d)
+{
+ d->status = AR9170_OWN_BITS_SW;
+ d->ctrl = 0;
+ d->dataSize = 0;
+ d->totalLen = 0;
+ d->lastAddr = d;
+ d->dataAddr = NULL;
+ d->nextAddr = d;
+}
+
+static void fill_descriptor(struct dma_desc *d, uint16_t size, uint8_t *data)
+{
+ d->status = AR9170_OWN_BITS_SW;
+ d->ctrl = 0;
+ d->dataSize = size;
+ d->totalLen = 0;
+ d->lastAddr = d;
+ d->dataAddr = data;
+ d->nextAddr = NULL;
+}
+
+static void init_queue(struct dma_queue *q, struct dma_desc *d)
+{
+ q->head = q->terminator = d;
+}
+
+/*
+ * - Init up_queue, down_queue, tx_queue[5], rx_queue.
+ * - Setup descriptors and data buffer address.
+ * - Ring descriptors rx_queue and down_queue by dma_reclaim().
+ *
+ * NOTE: LastAddr tempary point (same) to nextAddr after initialize.
+ * Because LastAddr is don't care in function dma_reclaim().
+ */
+void dma_init_descriptors(void)
+{
+ unsigned int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(dma_mem.terminator); i++)
+ clear_descriptor(&dma_mem.terminator[i]);
+
+ /* Assign terminators to DMA queues */
+ i = 0;
+ init_queue(&fw.pta.up_queue, &dma_mem.terminator[i++]);
+ init_queue(&fw.pta.down_queue, &dma_mem.terminator[i++]);
+ for (j = 0; j < __AR9170_NUM_TX_QUEUES; j++)
+ init_queue(&fw.wlan.tx_queue[j], &dma_mem.terminator[i++]);
+ init_queue(&fw.wlan.tx_retry, &dma_mem.terminator[i++]);
+ init_queue(&fw.wlan.rx_queue, &dma_mem.terminator[i++]);
+ fw.usb.int_desc = &dma_mem.terminator[i++];
+ fw.wlan.fw_desc = &dma_mem.terminator[i++];
+
+#ifdef CONFIG_CARL9170FW_CAB_QUEUE
+ for (j = 0; j < CARL9170_INTF_NUM; j++)
+ init_queue(&fw.wlan.cab_queue[j], &dma_mem.terminator[i++]);
+#endif /* CONFIG_CARL9170FW_CAB_QUEUE */
+
+ BUG_ON(AR9170_TERMINATOR_NUMBER != i);
+
+ DBG("Blocks:%d [tx:%d, rx:%d] Terminators:%d/%d\n",
+ AR9170_BLOCK_NUMBER, AR9170_TX_BLOCK_NUMBER,
+ AR9170_RX_BLOCK_NUMBER, AR9170_TERMINATOR_NUMBER, i);
+
+ /* Init descriptors and memory blocks */
+ for (i = 0; i < AR9170_BLOCK_NUMBER; i++) {
+ fill_descriptor(&dma_mem.block[i], AR9170_BLOCK_SIZE, dma_mem.data[i].data);
+
+ if (i < AR9170_TX_BLOCK_NUMBER)
+ dma_reclaim(&fw.pta.down_queue, &dma_mem.block[i]);
+ else
+ dma_reclaim(&fw.wlan.rx_queue, &dma_mem.block[i]);
+ }
+
+ /* Set DMA address registers */
+ set(AR9170_PTA_REG_DN_DMA_ADDRH, (uint32_t) fw.pta.down_queue.head >> 16);
+ set(AR9170_PTA_REG_DN_DMA_ADDRL, (uint32_t) fw.pta.down_queue.head & 0xffff);
+ set(AR9170_PTA_REG_UP_DMA_ADDRH, (uint32_t) fw.pta.up_queue.head >> 16);
+ set(AR9170_PTA_REG_UP_DMA_ADDRL, (uint32_t) fw.pta.up_queue.head & 0xffff);
+
+ for (i = 0; i < __AR9170_NUM_TX_QUEUES; i++)
+ set_wlan_txq_dma_addr(i, (uint32_t) fw.wlan.tx_queue[i].head);
+
+ set(AR9170_MAC_REG_DMA_RXQ_ADDR, (uint32_t) fw.wlan.rx_queue.head);
+ fw.usb.int_desc->dataSize = AR9170_BLOCK_SIZE;
+ fw.usb.int_desc->dataAddr = (void *) &dma_mem.reserved.rsp;
+
+ memset(DESC_PAYLOAD(fw.usb.int_desc), 0xff,
+ AR9170_INT_MAGIC_HEADER_SIZE);
+ memset(DESC_PAYLOAD_OFF(fw.usb.int_desc, AR9170_INT_MAGIC_HEADER_SIZE),
+ 0, AR9170_BLOCK_SIZE - AR9170_INT_MAGIC_HEADER_SIZE);
+
+ /* rsp is now available for use */
+ fw.usb.int_desc_available = 1;
+
+ memset(DESC_PAYLOAD(fw.wlan.fw_desc), 0, 128);
+ fw.wlan.fw_desc_available = 1;
+}
+
+/*
+ * Free descriptor.
+ *
+ * Exchange the terminator and the first descriptor of the packet
+ * for hardware ascy...
+ */
+void dma_reclaim(struct dma_queue *q, struct dma_desc *desc)
+{
+ struct dma_desc *tmpDesc, *last;
+ struct dma_desc tdesc;
+
+ /* 1. Set OWN bit to HW for all TDs to be added, clear ctrl and size */
+ tmpDesc = desc;
+ last = desc->lastAddr;
+
+ while (1) {
+ tmpDesc->status = AR9170_OWN_BITS_HW;
+ tmpDesc->ctrl = 0;
+ tmpDesc->totalLen = 0;
+ tmpDesc->dataSize = AR9170_BLOCK_SIZE;
+
+ /* TODO : Exception handle */
+
+ tmpDesc->lastAddr = tmpDesc;
+
+ if (tmpDesc == last)
+ break;
+
+ tmpDesc = tmpDesc->nextAddr;
+ }
+
+ /* 2. Next address of Last TD to be added = first TD */
+ tmpDesc->nextAddr = desc;
+
+ /* Link first TD to self */
+ desc->lastAddr = q->terminator;
+
+ /* 3. Copy first TD to be added to TTD */
+ copy_dma_desc(&tdesc, desc);
+
+ /* 4. Initialize new terminator */
+ clear_descriptor(desc);
+
+ /* 5. Copy TTD to last TD */
+ tdesc.status = 0;
+ copy_dma_desc((void *)q->terminator, (void *)&tdesc);
+ q->terminator->status |= AR9170_OWN_BITS_HW;
+
+ /* Update terminator pointer */
+ q->terminator = desc;
+}
+
+/*
+ * Put a complete packet into the tail of the Queue q.
+ * Exchange the terminator and the first descriptor of the packet
+ * for hardware ascy...
+ */
+void dma_put(struct dma_queue *q, struct dma_desc *desc)
+{
+ struct dma_desc *tmpDesc;
+ struct dma_desc tdesc;
+
+ tmpDesc = desc;
+
+ while (1) {
+ /* update totalLen */
+ tmpDesc->totalLen = desc->totalLen;
+
+ /* 1. Set OWN bit to HW for all TDs to be added */
+ tmpDesc->status = AR9170_OWN_BITS_HW;
+ /* TODO : Exception handle */
+
+ tmpDesc->lastAddr = desc->lastAddr;
+
+ if (desc->lastAddr == tmpDesc)
+ break;
+
+ tmpDesc = tmpDesc->nextAddr;
+ }
+
+ /* 2. Next address of Last TD to be added = first TD */
+ desc->lastAddr->nextAddr = desc;
+
+ /* If there is only one descriptor, update pointer of last descriptor */
+ if (desc->lastAddr == desc)
+ desc->lastAddr = q->terminator;
+
+ /* 3. Copy first TD to be added to TTD */
+ copy_dma_desc(&tdesc, desc);
+
+ /* 4. Initialize new terminator */
+ clear_descriptor(desc);
+
+ /* 5. Copy TTD to last TD */
+ tdesc.status &= (~AR9170_OWN_BITS);
+ copy_dma_desc((void *)q->terminator, (void *)&tdesc);
+ q->terminator->status |= AR9170_OWN_BITS_HW;
+
+ /* Update terminator pointer */
+ q->terminator = desc;
+}
+
+struct dma_desc *dma_unlink_head(struct dma_queue *queue)
+{
+ struct dma_desc *desc;
+
+ if (queue_empty(queue))
+ return NULL;
+
+ desc = queue->head;
+
+ queue->head = desc->lastAddr->nextAddr;
+
+ /* poison nextAddr address */
+ desc->lastAddr->nextAddr = desc->lastAddr;
+ desc->lastAddr->lastAddr = desc->lastAddr;
+
+ return desc;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 10:41:02 +0000