diff options
Diffstat (limited to 'carl9170fw/carlfw/src/wol.c')
-rw-r--r-- | carl9170fw/carlfw/src/wol.c | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/carl9170fw/carlfw/src/wol.c b/carl9170fw/carlfw/src/wol.c new file mode 100644 index 0000000..7afb8e5 --- /dev/null +++ b/carl9170fw/carlfw/src/wol.c @@ -0,0 +1,287 @@ +/* + * carl9170 firmware - used by the ar9170 wireless device + * + * WakeUp on WLAN functions + * + * Copyright 2011 Christian Lamparter <chunkeey@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "carl9170.h" +#include "shared/phy.h" +#include "timer.h" +#include "wl.h" +#include "printf.h" +#include "rf.h" +#include "wol.h" +#include "linux/ieee80211.h" + +#ifdef CONFIG_CARL9170FW_WOL + +void wol_cmd(const struct carl9170_wol_cmd *cmd) +{ + memcpy(&fw.wol.cmd, cmd, sizeof(cmd)); +} + +void wol_prepare(void) +{ + /* set MAC filter */ + memcpy((void *)AR9170_MAC_REG_MAC_ADDR_L, fw.wol.cmd.mac, 6); + memcpy((void *)AR9170_MAC_REG_BSSID_L, fw.wol.cmd.bssid, 6); + set(AR9170_MAC_REG_RX_CONTROL, AR9170_MAC_RX_CTRL_DEAGG); + + /* set filter policy to: discard everything */ + fw.wlan.rx_filter = CARL9170_RX_FILTER_EVERYTHING; + + /* reenable rx dma */ + wlan_trigger(AR9170_DMA_TRIGGER_RXQ); + + /* initialize the last_beacon timer */ + fw.wol.last_null = fw.wol.last_beacon = get_clock_counter(); +} + +#ifdef CONFIG_CARL9170FW_WOL_NL80211_TRIGGERS +static bool wlan_rx_wol_magic_packet(const struct ieee80211_hdr *hdr, const unsigned int len) +{ + const unsigned char *data, *end, *mac; + unsigned int found = 0; + + /* + * LIMITATION: + * We can only scan the first AR9170_BLOCK_SIZE [=~320] bytes + * for MAGIC patterns! + */ + + mac = (const unsigned char *) AR9170_MAC_REG_MAC_ADDR_L; + + data = (u8 *)((unsigned long)hdr + ieee80211_hdrlen(hdr->frame_control)); + end = (u8 *)((unsigned long)hdr + len); + + /* + * scan for standard WOL Magic frame + * + * "A physical WakeOnLAN (Magic Packet) will look like this: + * --------------------------------------------------------------- + * | Synchronization Stream | Target MAC | Password (optional) | + * | 6 octets | 96 octets | 0, 4 or 6 | + * --------------------------------------------------------------- + * + * The Synchronization Stream is defined as 6 bytes of FFh. + * The Target MAC block contains 16 duplications of the IEEEaddress + * of the target, with no breaks or interruptions. + * + * The Password field is optional, but if present, contains either + * 4 bytes or 6 bytes. The WakeOnLAN dissector was implemented to + * dissect the password, if present, according to the command-line + * format that ether-wake uses, therefore, if a 4-byte password is + * present, it will be dissected as an IPv4 address and if a 6-byte + * password is present, it will be dissected as an Ethernet address. + * + * <http://wiki.wireshark.org/WakeOnLAN> + */ + + while (data < end) { + if (found >= 6) { + if (*data == mac[found % 6]) + found++; + else + found = 0; + } + + /* previous check might reset found counter */ + if (found < 6) { + if (*data == 0xff) + found++; + else + found = 0; + } + + if (found == (6 + 16 * 6)) + return true; + + data++; + } + + return false; +} + +static void wlan_wol_connect_callback(void __unused *dummy, bool success) +{ + if (success) + fw.wol.lost_null = 0; + else + fw.wol.lost_null++; +} + +static void wlan_wol_connection_monitor(void) +{ + struct carl9170_tx_null_superframe *nullf = &dma_mem.reserved.cmd.null; + struct ieee80211_hdr *null = (struct ieee80211_hdr *) &nullf->f.null; + + if (!fw.wlan.fw_desc_available) + return; + + memset(nullf, 0, sizeof(*nullf)); + + nullf->s.len = sizeof(struct carl9170_tx_superdesc) + + sizeof(struct ar9170_tx_hwdesc) + + sizeof(struct ieee80211_hdr); + nullf->s.ri[0].tries = 3; + nullf->s.assign_seq = true; + nullf->s.queue = AR9170_TXQ_VO; + nullf->f.hdr.length = sizeof(struct ieee80211_hdr) + FCS_LEN; + + nullf->f.hdr.mac.backoff = 1; + nullf->f.hdr.mac.hw_duration = 1; + nullf->f.hdr.mac.erp_prot = AR9170_TX_MAC_PROT_RTS; + + nullf->f.hdr.phy.modulation = AR9170_TX_PHY_MOD_OFDM; + nullf->f.hdr.phy.bandwidth = AR9170_TX_PHY_BW_20MHZ; + nullf->f.hdr.phy.chains = AR9170_TX_PHY_TXCHAIN_2; + nullf->f.hdr.phy.tx_power = 29; /* 14.5 dBm */ + nullf->f.hdr.phy.mcs = AR9170_TXRX_PHY_RATE_OFDM_6M; + + /* format outgoing nullfunc */ + null->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | + IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS); + + memcpy(null->addr1, fw.wol.cmd.bssid, 6); + memcpy(null->addr2, fw.wol.cmd.mac, 6); + memcpy(null->addr3, fw.wol.cmd.bssid, 6); + + wlan_tx_fw(&nullf->s, wlan_wol_connect_callback); +} + +static bool wlan_rx_wol_disconnect(const unsigned int rx_filter, + const struct ieee80211_hdr *hdr, + const unsigned int __unused len) +{ + const unsigned char *bssid; + bssid = (const unsigned char *) AR9170_MAC_REG_BSSID_L; + + /* should catch both broadcast and unicast MLMEs */ + if (!(rx_filter & CARL9170_RX_FILTER_OTHER_RA)) { + if (ieee80211_is_deauth(hdr->frame_control) || + ieee80211_is_disassoc(hdr->frame_control)) + return true; + } + + if (ieee80211_is_beacon(hdr->frame_control) && + compare_ether_address(hdr->addr3, bssid)) { + fw.wol.last_beacon = get_clock_counter(); + } + + return false; +} + +#endif /* CARL9170FW_WOL_NL80211_TRIGGERS */ + +#ifdef CONFIG_CARL9170FW_WOL_PROBE_REQUEST + +/* + * Note: CONFIG_CARL9170FW_WOL_PROBE_REQUEST_SSID is not a real + * string. We have to be careful not to add a \0 at the end. + */ +static const struct { + u8 ssid_ie; + u8 ssid_len; + u8 ssid[sizeof(CONFIG_CARL9170FW_WOL_PROBE_REQUEST_SSID) - 1]; +} __packed probe_req = { + .ssid_ie = WLAN_EID_SSID, + .ssid_len = sizeof(CONFIG_CARL9170FW_WOL_PROBE_REQUEST_SSID) - 1, + .ssid = CONFIG_CARL9170FW_WOL_PROBE_REQUEST_SSID, +}; + +static bool wlan_rx_wol_probe_ssid(const struct ieee80211_hdr *hdr, const unsigned int len) +{ + const unsigned char *data, *end, *scan = (void *) &probe_req; + + /* + * IEEE 802.11-2007 7.3.2.1 specifies that the SSID is no + * longer than 32 octets. + */ + BUILD_BUG_ON((sizeof(CONFIG_CARL9170FW_WOL_PROBE_REQUEST_SSID) - 1) > 32); + + if (ieee80211_is_probe_req(hdr->frame_control)) { + unsigned int i; + end = (u8 *)((unsigned long)hdr + len); + + /* + * The position of the SSID information element inside + * a probe request frame is more or less "fixed". + */ + data = (u8 *)((struct ieee80211_mgmt *)hdr)->u.probe_req.variable; + for (i = 0; i < (unsigned int)(probe_req.ssid_len + 1); i++) { + if (data > end || scan[i] != data[i]) + return false; + } + + return true; + } + + return false; +} +#endif /* CONFIG_CARL9170FW_WOL_PROBE_REQUEST */ + +void wol_rx(const unsigned int rx_filter __unused, const struct ieee80211_hdr *hdr __unused, const unsigned int len __unused) +{ +#ifdef CONFIG_CARL9170FW_WOL_NL80211_TRIGGERS + /* Disconnect is always enabled */ + if (fw.wol.cmd.flags & CARL9170_WOL_DISCONNECT && + rx_filter & CARL9170_RX_FILTER_MGMT) + fw.wol.wake_up |= wlan_rx_wol_disconnect(rx_filter, hdr, len); + + if (fw.wol.cmd.flags & CARL9170_WOL_MAGIC_PKT && + rx_filter & CARL9170_RX_FILTER_DATA) + fw.wol.wake_up |= wlan_rx_wol_magic_packet(hdr, len); +#endif /* CONFIG_CARL9170FW_WOL_NL80211_TRIGGERS */ + +#ifdef CONFIG_CARL9170FW_WOL_PROBE_REQUEST + if (rx_filter & CARL9170_RX_FILTER_MGMT) + fw.wol.wake_up |= wlan_rx_wol_probe_ssid(hdr, len); +#endif /* CONFIG_CARL9170FW_WOL_PROBE_REQUEST */ +} + +void wol_janitor(void) +{ + if (unlikely(fw.suspend_mode == CARL9170_HOST_SUSPENDED)) { +#ifdef CONFIG_CARL9170FW_WOL_NL80211_TRIGGERS + if (fw.wol.cmd.flags & CARL9170_WOL_DISCONNECT) { + /* + * connection lost after 10sec without receiving + * a beacon + */ + if (is_after_msecs(fw.wol.last_beacon, 10000)) + fw.wol.wake_up |= true; + + if (fw.wol.cmd.null_interval && + is_after_msecs(fw.wol.last_null, fw.wol.cmd.null_interval)) + wlan_wol_connection_monitor(); + + if (fw.wol.lost_null >= 5) + fw.wol.wake_up |= true; + } +#endif /* CONFIG_CARL9170FW_WOL_NL80211_TRIGGERS */ + + if (fw.wol.wake_up) { + fw.suspend_mode = CARL9170_AWAKE_HOST; + set(AR9170_USB_REG_WAKE_UP, AR9170_USB_WAKE_UP_WAKE); + } + } +} +#else + +#endif /* CONFIG_CARL9170FW_WOL */ |