summaryrefslogtreecommitdiffstats
path: root/usbdux/usbdux_firmware.asm
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--usbdux/usbdux_firmware.asm1184
1 files changed, 1184 insertions, 0 deletions
diff --git a/usbdux/usbdux_firmware.asm b/usbdux/usbdux_firmware.asm
new file mode 100644
index 0000000..b93a895
--- /dev/null
+++ b/usbdux/usbdux_firmware.asm
@@ -0,0 +1,1184 @@
+; usbdux_firmware.asm
+; Copyright (C) 2004,2009 Bernd Porr, Bernd.Porr@f2s.com
+; For usbdux.c
+;
+; This program is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 2 of the License, or
+; (at your option) any later version.
+;
+; This program is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with this program; if not, write to the Free Software
+; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+;
+;
+; Firmware: usbdux_firmware.asm for usbdux.c
+; Description: University of Stirling USB DAQ & INCITE Technology Limited
+; Devices: [ITL] USB-DUX (usbdux.o)
+; Author: Bernd Porr <Bernd.Porr@f2s.com>
+; Updated: 17 Apr 2009
+; Status: stable
+;
+;;;
+;;;
+;;;
+
+ .inc fx2-include.asm
+
+ .equ CHANNELLIST,80h ; channellist in indirect memory
+
+ .equ CMD_FLAG,90h ; flag if next IN transf is DIO
+ .equ SGLCHANNEL,91h ; channel for INSN
+ .equ PWMFLAG,92h ; PWM
+
+ .equ DIOSTAT0,98h ; last status of the digital port
+ .equ DIOSTAT1,99h ; same for the second counter
+
+ .equ CTR0,0A0H ; counter 0
+ .equ CTR1,0A2H ; counter 1
+
+ .org 0000h ; after reset the processor starts here
+ ljmp main ; jump to the main loop
+
+ .org 000bh ; timer 0 irq
+ ljmp timer0_isr
+
+ .org 0043h ; the IRQ2-vector
+ ljmp jmptbl ; irq service-routine
+
+ .org 0100h ; start of the jump table
+
+jmptbl: ljmp sudav_isr
+ nop
+ ljmp sof_isr
+ nop
+ ljmp sutok_isr
+ nop
+ ljmp suspend_isr
+ nop
+ ljmp usbreset_isr
+ nop
+ ljmp hispeed_isr
+ nop
+ ljmp ep0ack_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0in_isr
+ nop
+ ljmp ep0out_isr
+ nop
+ ljmp ep1in_isr
+ nop
+ ljmp ep1out_isr
+ nop
+ ljmp ep2_isr
+ nop
+ ljmp ep4_isr
+ nop
+ ljmp ep6_isr
+ nop
+ ljmp ep8_isr
+ nop
+ ljmp ibn_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep0ping_isr
+ nop
+ ljmp ep1ping_isr
+ nop
+ ljmp ep2ping_isr
+ nop
+ ljmp ep4ping_isr
+ nop
+ ljmp ep6ping_isr
+ nop
+ ljmp ep8ping_isr
+ nop
+ ljmp errlimit_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp spare_isr
+ nop
+ ljmp ep2isoerr_isr
+ nop
+ ljmp ep4isoerr_isr
+ nop
+ ljmp ep6isoerr_isr
+ nop
+ ljmp ep8isoerr_isr
+
+
+ ;; dummy isr
+sudav_isr:
+sutok_isr:
+suspend_isr:
+usbreset_isr:
+hispeed_isr:
+ep0ack_isr:
+spare_isr:
+ep0in_isr:
+ep0out_isr:
+ep1in_isr:
+ibn_isr:
+ep0ping_isr:
+ep1ping_isr:
+ep2ping_isr:
+ep4ping_isr:
+ep6ping_isr:
+ep8ping_isr:
+errlimit_isr:
+ep2isoerr_isr:
+ep4isoerr_isr:
+ep6isoerr_isr:
+ep8isoerr_isr:
+ep6_isr:
+ep2_isr:
+ep4_isr:
+
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+
+ ;; clear the USB2 irq bit and return
+ mov a,EXIF
+ clr acc.4
+ mov EXIF,a
+
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+
+ reti
+
+
+;;; main program
+;;; basically only initialises the processor and
+;;; then engages in an endless loop
+main:
+ mov DPTR,#CPUCS ; CPU control register
+ mov a,#00010000b ; 48Mhz
+ lcall syncdelaywr
+
+ mov dptr,#REVCTL
+ mov a,#00000011b ; allows skip
+ lcall syncdelaywr
+
+ mov IP,#0 ; all std 8051 int have low priority
+ mov EIP,#0FFH ; all FX2 interrupts have high priority
+
+ mov dptr,#INTSETUP ; IRQ setup register
+ mov a,#08h ; enable autovector
+ lcall syncdelaywr
+
+ lcall initAD ; init the ports to the converters
+
+ lcall initeps ; init the isochronous data-transfer
+
+ lcall init_timer
+
+mloop2: nop
+
+;;; pwm
+ mov r0,#PWMFLAG ; pwm on?
+ mov a,@r0 ; get info
+ jz mloop2 ; it's off
+
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz mloop2 ; GPIF still busy
+
+ mov a,#01h ; WR,EP4, 01 = EP4
+ mov GPIFTRIG,a ; restart it
+
+ sjmp mloop2 ; loop for ever
+
+
+;;; GPIF waveform for PWM
+waveform:
+ ;; 0 1 2 3 4 5 6 7(not used)
+ ;; len (gives 50.007Hz)
+ .db 195, 195, 195, 195, 195, 195, 1, 1
+
+ ;; opcode
+ .db 002H, 006H, 002H, 002H, 002H, 002H, 002H, 002H
+
+ ;; out
+ .db 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH, 0ffH
+
+ ;; log
+ .db 000H, 000H, 000H, 000H, 000H, 000H, 000H, 000H
+
+
+stopPWM:
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#0 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ mov dptr,#IFCONFIG ; switch off GPIF
+ mov a,#10000000b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+ ret
+
+
+;;; init PWM
+startPWM:
+ mov dptr,#IFCONFIG ; switch on IFCLK signal
+ mov a,#10000010b ; gpif, 30MHz, internal IFCLK
+ lcall syncdelaywr
+
+ mov OEB,0FFH ; output to port B
+
+ mov DPTR,#EP4CFG
+ mov a,#10100000b ; valid, out, bulk
+ movx @DPTR,a
+
+ ;; reset the endpoint
+ mov dptr,#FIFORESET
+ mov a,#80h ; NAK
+ lcall syncdelaywr
+ mov a,#84h ; reset EP4 + NAK
+ lcall syncdelaywr
+ mov a,#0 ; normal op
+ lcall syncdelaywr
+
+ mov dptr,#EP4BCL
+ mov a,#0H ; discard packets
+ lcall syncdelaywr ; empty FIFO buffer
+ lcall syncdelaywr ; empty FIFO buffer
+
+ ;; aborts all transfers by the GPIF
+ mov dptr,#GPIFABORT
+ mov a,#0ffh ; abort all transfers
+ lcall syncdelaywr
+
+ ;; wait for GPIF to finish
+wait_f_abort:
+ mov a,GPIFTRIG ; GPIF status
+ anl a,#80h ; done bit
+ jz wait_f_abort ; GPIF busy
+
+ mov dptr,#GPIFCTLCFG
+ mov a,#10000000b ; tri state for CTRL
+ lcall syncdelaywr
+
+ mov dptr,#GPIFIDLECTL
+ mov a,#11110000b ; all CTL outputs low
+ lcall syncdelaywr
+
+ ;; abort if FIFO is empty
+ mov a,#00000001b ; abort if empty
+ mov dptr,#EP4GPIFFLGSEL
+ lcall syncdelaywr
+
+ ;;
+ mov a,#00000001b ; stop if GPIF flg
+ mov dptr,#EP4GPIFPFSTOP
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB3
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB2
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH ; 512 bytes
+ mov dptr,#GPIFTCB1
+ lcall syncdelaywr
+
+ ;; transaction counter
+ mov a,#0ffH
+ mov dptr,#GPIFTCB0
+ lcall syncdelaywr
+
+ ;; RDY pins. Not used here.
+ mov a,#0
+ mov dptr,#GPIFREADYCFG
+ lcall syncdelaywr
+
+ ;; drives the output in the IDLE state
+ mov a,#1
+ mov dptr,#GPIFIDLECS
+ lcall syncdelaywr
+
+ ;; direct data transfer from the EP to the GPIF
+ mov dptr,#EP4FIFOCFG
+ mov a,#00010000b ; autoout=1, byte-wide
+ lcall syncdelaywr
+
+ ;; waveform 0 is used for FIFO out
+ mov dptr,#GPIFWFSELECT
+ mov a,#00000000b
+ movx @dptr,a
+ lcall syncdelay
+
+ ;; transfer the delay byte from the EP to the waveform
+ mov dptr,#0e781h ; EP1 buffer
+ movx a,@dptr ; get the delay
+ mov dptr,#waveform ; points to the waveform
+ mov r2,#6 ; fill 6 bytes
+timloop:
+ movx @dptr,a ; save timing in a xxx
+ inc dptr
+ djnz r2,timloop ; fill the 6 delay bytes
+
+ ;; load waveform
+ mov AUTOPTRH2,#0E4H ; XDATA0H
+ lcall syncdelay
+ mov AUTOPTRL2,#00H ; XDATA0L
+ lcall syncdelay
+
+ mov dptr,#waveform ; points to the waveform
+
+ mov AUTOPTRSETUP,#7 ; autoinc and enable
+ lcall syncdelay
+
+ mov r2,#20H ; 32 bytes to transfer
+
+wavetr:
+ movx a,@dptr
+ inc dptr
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ mov dptr,#XAUTODAT2
+ movx @dptr,a
+ lcall syncdelay
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ djnz r2,wavetr
+
+ mov dptr,#OUTPKTEND
+ mov a,#084H
+ lcall syncdelaywr
+ lcall syncdelaywr
+
+ mov r0,#PWMFLAG ; flag for PWM
+ mov a,#1 ; PWM (for the main loop)
+ mov @r0,a ; set it
+
+ ret
+
+
+
+;;; initialise the ports for the AD-converter
+initAD:
+ mov OEA,#27H ;PortA0,A1,A2,A5 Outputs
+ mov IOA,#22H ;/CS = 1, disable transfers to the converters
+ ret
+
+
+;;; init the timer for the soft counters
+init_timer:
+ ;; init the timer for 2ms sampling rate
+ mov CKCON,#00000001b; CLKOUT/12 for timer
+ mov TL0,#010H ; 16
+ mov TH0,#0H ; 256
+ mov IE,#82H ; switch on timer interrupt (80H for all IRQs)
+ mov TMOD,#00000000b ; 13 bit counters
+ setb TCON.4 ; enable timer 0
+ ret
+
+
+;;; from here it's only IRQ handling...
+
+;;; A/D-conversion:
+;;; control-byte in a,
+;;; result in r3(low) and r4(high)
+;;; this routine is optimised for speed
+readAD: ; mask the control byte
+ anl a,#01111100b ; only the channel, gain+pol are left
+ orl a,#10000001b ; start bit, external clock
+ ;; set CS to low
+ clr IOA.1 ; set /CS to zero
+ ;; send the control byte to the AD-converter
+ mov R2,#8 ; bit-counter
+bitlp: jnb ACC.7,bitzero ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clock ; continue with the clock
+bitzero:clr IOA.2 ; clear the DIN bit
+clock: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,bitlp
+
+ ;; continue the aquisition (already started)
+ clr IOA.2 ; clear the DIN bit
+ mov R2,#5 ; five steps for the aquision
+clockaq:setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ djnz R2,clockaq ; loop
+
+ ;; read highbyte from the A/D-converter
+ ;; and do the conversion
+ mov r4,#0 ; Highbyte goes into R4
+ mov R2,#4 ; COUNTER 4 data bits in the MSB
+ mov r5,#08h ; create bit-mask
+gethi: ; loop get the 8 highest bits from MSB downw
+ setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ mov a,IOA ; from port A
+ jnb ACC.4,zerob ; the in-bit is zero
+ mov a,r4 ; get the byte
+ orl a,r5 ; or the bit to the result
+ mov r4,a ; save it again in r4
+zerob: mov a,r5 ; get r5 in order to shift the mask
+ rr a ; rotate right
+ mov r5,a ; back to r5
+ djnz R2,gethi
+ ;; read the lowbyte from the A/D-converter
+ mov r3,#0 ; Lowbyte goes into R3
+ mov r2,#8 ; COUNTER 8 data-bits in the LSB
+ mov r5,#80h ; create bit-mask
+getlo: ; loop get the 8 highest bits from MSB downw
+ setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ mov a,IOA ; from port A
+ jnb ACC.4,zerob2 ; the in-bit is zero
+ mov a,r3 ; get the result-byte
+ orl a,r5 ; or the bit to the result
+ mov r3,a ; save it again in r4
+zerob2: mov a,r5 ; get r5 in order to shift the mask
+ rr a ; rotate right
+ mov r5,a ; back to r5
+ djnz R2,getlo
+ setb IOA.1 ; set /CS to one
+ ;;
+ ret
+
+
+
+;;; aquires data from A/D channels and stores them in the EP6 buffer
+conv_ad:
+ mov AUTOPTRH1,#0F8H ; auto pointer on EP6
+ mov AUTOPTRL1,#00H
+ mov AUTOPTRSETUP,#7
+ mov r0,#CHANNELLIST ; points to the channellist
+
+ mov a,@r0 ; number of channels
+ mov r1,a ; counter
+
+ mov DPTR,#XAUTODAT1 ; auto pointer
+convloop:
+ inc r0
+ mov a,@r0 ; Channel
+ lcall readAD
+ mov a,R3 ;
+ movx @DPTR,A
+ mov a,R4 ;
+ movx @DPTR,A
+ djnz r1,convloop
+
+ ret
+
+
+
+
+;;; initilise the transfer
+;;; It is assumed that the USB interface is in alternate setting 3
+initeps:
+ mov dptr,#FIFORESET
+ mov a,#80H
+ movx @dptr,a ; reset all fifos
+ mov a,#2
+ movx @dptr,a ;
+ mov a,#4
+ movx @dptr,a ;
+ mov a,#6
+ movx @dptr,a ;
+ mov a,#8
+ movx @dptr,a ;
+ mov a,#0
+ movx @dptr,a ; normal operat
+
+ mov DPTR,#EP2CFG
+ mov a,#10010010b ; valid, out, double buff, iso
+ movx @DPTR,a
+
+ mov dptr,#EP2FIFOCFG
+ mov a,#00000000b ; manual
+ movx @dptr,a
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait to sync
+
+ mov DPTR,#EP1OUTCFG
+ mov a,#10100000b ; valid
+ movx @dptr,a
+
+ mov dptr,#EP1OUTBC ; "arm" it
+ mov a,#00h
+ movx @DPTR,a ; can receive data
+ lcall syncdelay ; wait until we can write again
+ movx @dptr,a ; make shure its really empty
+ lcall syncdelay ; wait
+
+ mov DPTR,#EP6CFG ; ISO data from here to the host
+ mov a,#11010010b ; Valid
+ movx @DPTR,a ; ISO transfer, double buffering
+
+ mov DPTR,#EP8CFG ; EP8
+ mov a,#11100000b ; BULK data from here to the host
+ movx @DPTR,a ;
+
+ mov dptr,#EPIE ; interrupt enable
+ mov a,#10001000b ; enable irq for ep1out,8
+ movx @dptr,a ; do it
+
+ mov dptr,#EPIRQ ; clear IRQs
+ mov a,#10100000b
+ movx @dptr,a
+
+ ;; enable interrups
+ mov DPTR,#USBIE ; USB int enables register
+ mov a,#2 ; enables SOF (1ms/125us interrupt)
+ movx @DPTR,a ;
+
+ mov EIE,#00000001b ; enable INT2 in the 8051's SFR
+ mov IE,#80h ; IE, enable all interrupts
+
+ ret
+
+
+;;; counter
+;;; r0: DIOSTAT
+;;; r1: counter address
+;;; r2: up/down-mask
+;;; r3: reset-mask
+;;; r4: clock-mask
+counter:
+ mov a,IOB ; actual IOB input state
+ mov r5,a ; save in r5
+ anl a,r3 ; bit mask for reset
+ jz no_reset ; reset if one
+ clr a ; set counter to zero
+ mov @r1,a
+ inc r4
+ mov @r1,a
+ sjmp ctr_end
+no_reset:
+ mov a,@r0 ; get last state
+ xrl a,r5 ; has it changed?
+ anl a,r5 ; is it now on?
+ anl a,r4 ; mask out the port
+ jz ctr_end ; no rising edge
+ mov a,r5 ; get port B again
+ anl a,r2 ; test if up or down
+ jnz ctr_up ; count up
+ mov a,@r1
+ dec a
+ mov @r1,a
+ cjne a,#0ffh,ctr_end ; underflow?
+ inc r1 ; high byte
+ mov a,@r1
+ dec a
+ mov @r1,a
+ sjmp ctr_end
+ctr_up: ; count up
+ mov a,@r1
+ inc a
+ mov @r1,a
+ jnz ctr_end
+ inc r1 ; high byte
+ mov a,@r1
+ inc a
+ mov @r1,a
+ctr_end:
+ mov a,r5
+ mov @r0,a
+ ret
+
+;;; implements two soft counters with up/down and reset
+timer0_isr:
+ push dps
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+
+ mov r0,#DIOSTAT0 ; status of port
+ mov r1,#CTR0 ; address of counter0
+ mov a,#00000001b ; bit 0
+ mov r4,a ; clock
+ rl a ; bit 1
+ mov r2,a ; up/down
+ rl a ; bit 2
+ mov r3,a ; reset mask
+ lcall counter
+ inc r0 ; to DISTAT1
+ inc r1 ; to CTR1
+ inc r1
+ mov a,r3
+ rl a ; bit 3
+ rl a ; bit 4
+ mov r4,a ; clock
+ rl a ; bit 5
+ mov r2,a ; up/down
+ rl a ; bit 6
+ mov r3,a ; reset
+ lcall counter
+
+ pop 05h ; R5
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dps
+
+ reti
+
+;;; interrupt-routine for SOF
+;;; is for full speed
+sof_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov a,EP2468STAT
+ anl a,#20H ; full?
+ jnz epfull ; EP6-buffer is full
+
+ lcall conv_ad ; conversion
+
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until we can write again
+
+ mov DPTR,#EP6BCL ; byte count L
+ mov a,#10H ; is 8x word = 16 bytes
+ lcall syncdelaywr ; wait until we can write again
+
+epfull:
+ ;; do the D/A conversion
+ mov a,EP2468STAT
+ anl a,#01H ; empty
+ jnz epempty ; nothing to get
+
+ mov dptr,#0F000H ; EP2 fifo buffer
+ lcall dalo ; conversion
+
+ mov dptr,#EP2BCL ; "arm" it
+ mov a,#00h
+ lcall syncdelaywr ; wait for the rec to sync
+ lcall syncdelaywr ; wait for the rec to sync
+
+epempty:
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#USBIRQ ; points to the SOF
+ mov a,#2 ; clear the SOF
+ movx @DPTR,a
+
+nosof:
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+reset_ep8:
+ ;; erase all data in ep8
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#8 ; reset EP8
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+
+reset_ep6:
+ ;; throw out old data
+ mov dptr,#FIFORESET
+ mov a,#80H ; NAK
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#6 ; reset EP6
+ lcall syncdelaywr
+ mov dptr,#FIFORESET
+ mov a,#0 ; normal operation
+ lcall syncdelaywr
+ ret
+
+;;; interrupt-routine for ep1out
+;;; receives the channel list and other commands
+ep1out_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ mov dptr,#0E780h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the first byte
+ mov r0,#CMD_FLAG ; pointer to the command byte
+ mov @r0,a ; store the command byte for ep8
+
+ mov dptr,#ep1out_jmp; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep1out_jmp:
+ sjmp storechannellist; a=0
+ sjmp single_da ; a=1
+ sjmp config_digital_b; a=2
+ sjmp write_digital_b ; a=3
+ sjmp storesglchannel ; a=4
+ sjmp readcounter ; a=5
+ sjmp writecounter ; a=6
+ sjmp pwm_on ; a=7
+ sjmp pwm_off ; a=8
+
+pwm_on:
+ lcall startPWM
+ sjmp over_da
+
+pwm_off:
+ lcall stopPWM
+ sjmp over_da
+
+ ;; read the counter
+readcounter:
+ lcall reset_ep8 ; reset ep8
+ lcall ep8_ops ; fill the counter data in there
+ sjmp over_da ; jump to the end
+
+ ;; write zeroes to the counters
+writecounter:
+ mov dptr,#0e781h ; buffer
+ mov r0,#CTR0 ; r0 points to counter 0
+ movx a,@dptr ; channel number
+ jz wrctr0 ; first channel
+ mov r1,a ; counter
+wrctrl:
+ inc r0 ; next counter
+ inc r0 ; next counter
+ djnz r1,wrctrl ; advance to the right counter
+wrctr0:
+ inc dptr ; get to the value
+ movx a,@dptr ; get value
+ mov @r0,a ; save in ctr
+ inc r0 ; next byte
+ inc dptr
+ movx a,@dptr ; get value
+ mov @r0,a ; save in ctr
+ sjmp over_da ; jump to the end
+
+storesglchannel:
+ mov r0,#SGLCHANNEL ; the conversion bytes are now stored in 80h
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ;
+ mov @r0,a
+
+ lcall reset_ep8 ; reset FIFO
+ ;; Save new A/D data in EP8. This is the first byte
+ ;; the host will read during an INSN. If there are
+ ;; more to come they will be handled by the ISR of
+ ;; ep8.
+ lcall ep8_ops ; get A/D data
+
+ sjmp over_da
+
+
+;;; Channellist:
+;;; the first byte is zero:
+;;; we've just received the channel list
+;;; the channel list is stored in the addresses from CHANNELLIST which
+;;; are _only_ reachable by indirect addressing
+storechannellist:
+ mov r0,#CHANNELLIST ; the conversion bytes are now stored in 80h
+ mov r2,#9 ; counter
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+chanlloop:
+ movx a,@dptr ;
+ mov @r0,a
+ inc dptr
+ inc r0
+ djnz r2,chanlloop
+
+ lcall reset_ep6 ; reset FIFO
+
+ ;; load new A/D data into EP6
+ ;; This must be done. Otherwise the ISR is never called.
+ ;; The ISR is only called when data has _left_ the
+ ;; ep buffer here it has to be refilled.
+ lcall ep6_arm ; fill with the first data byte
+
+ sjmp over_da
+
+;;; Single DA conversion. The 2 bytes are in the FIFO buffer
+single_da:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ lcall dalo ; conversion
+ sjmp over_da
+
+;;; configure the port B as input or output (bitwise)
+config_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the second byte
+ mov OEB,a ; set the output enable bits
+ sjmp over_da
+
+;;; Write one byte to the external digital port B
+;;; and prepare for digital read
+write_digital_b:
+ mov dptr,#0e781h ; FIFO buffer of EP1OUT
+ movx a,@dptr ; get the second byte
+ mov OEB,a ; output enable
+ inc dptr ; next byte
+ movx a,@dptr ; bits
+ mov IOB,a ; send the byte to the I/O port
+
+ lcall reset_ep8 ; reset FIFO of ep 8
+
+ ;; fill ep8 with new data from port B
+ ;; When the host requests the data it's already there.
+ ;; This must be so. Otherwise the ISR is not called.
+ ;; The ISR is only called when a packet has been delivered
+ ;; to the host. Thus, we need a packet here in the
+ ;; first instance.
+ lcall ep8_ops ; get digital data
+
+ ;;
+ ;; for all commands the same
+over_da:
+ mov dptr,#EP1OUTBC
+ mov a,#00h
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+ lcall syncdelaywr ; arm
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#00001000b ; clear the ep1outirq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+
+;;; all channels
+dalo:
+ movx a,@dptr ; number of channels
+ inc dptr ; pointer to the first channel
+ mov r0,a ; 4 channels
+nextDA:
+ movx a,@dptr ; get the first low byte
+ mov r3,a ; store in r3 (see below)
+ inc dptr ; point to the high byte
+ movx a,@dptr ; get the high byte
+ mov r4,a ; store in r4 (for writeDA)
+ inc dptr ; point to the channel number
+ movx a,@dptr ; get the channel number
+ inc dptr ; get ready for the next channel
+ lcall writeDA ; write value to the DAC
+ djnz r0,nextDA ; next channel
+ ret
+
+
+
+;;; D/A-conversion:
+;;; control-byte in a,
+;;; value in r3(low) and r4(high)
+writeDA: ; mask the control byte
+ anl a,#11000000b ; only the channel is left
+ orl a,#00110000b ; internal clock, bipolar mode, +/-5V
+ orl a,r4 ; or the value of R4 to it
+ ;; set CS to low
+ clr IOA.5 ; set /CS to zero
+ ;; send the first byte to the DA-converter
+ mov R2,#8 ; bit-counter
+DA1: jnb ACC.7,zeroda ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clkda ; continue with the clock
+zeroda: clr IOA.2 ; clear the DIN bit
+clkda: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,DA1
+
+
+ ;; send the second byte to the DA-converter
+ mov a,r3 ; low byte
+ mov R2,#8 ; bit-counter
+DA2: jnb ACC.7,zeroda2 ; jump if Bit7 = 0?
+ setb IOA.2 ; set the DIN bit
+ sjmp clkda2 ; continue with the clock
+zeroda2:clr IOA.2 ; clear the DIN bit
+clkda2: setb IOA.0 ; SCLK = 1
+ clr IOA.0 ; SCLK = 0
+ rl a ; next Bit
+ djnz R2,DA2
+ ;;
+ setb IOA.5 ; set /CS to one
+ ;;
+noDA: ret
+
+
+
+;;; arm ep6
+ep6_arm:
+ lcall conv_ad
+
+ mov DPTR,#EP6BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr ; wait until the length has arrived
+
+ mov DPTR,#EP6BCL ; byte count L
+ mov a,#10H ; is one
+ lcall syncdelaywr ; wait until the length has been proc
+ ret
+
+
+
+;;; converts one analog/digital channel and stores it in EP8
+;;; also gets the content of the digital ports B and D depending on
+;;; the COMMAND flag
+ep8_ops:
+ mov dptr,#0fc01h ; ep8 fifo buffer
+ clr a ; high byte
+ movx @dptr,a ; set H=0
+ mov dptr,#0fc00h ; low byte
+ mov r0,#CMD_FLAG
+ mov a,@r0
+ movx @dptr,a ; save command byte
+
+ mov dptr,#ep8_jmp ; jump table for the different functions
+ rl a ; multiply by 2: sizeof sjmp
+ jmp @a+dptr ; jump to the jump table
+ ;; jump table, corresponds to the command bytes defined
+ ;; in usbdux.c
+ep8_jmp:
+ sjmp ep8_err ; a=0, err
+ sjmp ep8_err ; a=1, err
+ sjmp ep8_err ; a=2, err
+ sjmp ep8_dio ; a=3, digital read
+ sjmp ep8_sglchannel ; a=4, analog A/D
+ sjmp ep8_readctr ; a=5, read counter
+ sjmp ep8_err ; a=6, write counter
+
+ ;; reads all counters
+ep8_readctr:
+ mov r0,#CTR0 ; points to counter0
+ mov dptr,#0fc02h ; ep8 fifo buffer
+ mov r1,#8 ; transfer 4 16bit counters
+ep8_ctrlp:
+ mov a,@r0 ; get the counter
+ movx @dptr,a ; save in the fifo buffer
+ inc r0 ; inc pointer to the counters
+ inc dptr ; inc pointer to the fifo buffer
+ djnz r1,ep8_ctrlp ; loop until ready
+
+ sjmp ep8_send ; send the data
+
+ ;; read one A/D channel
+ep8_sglchannel:
+ mov r0,#SGLCHANNEL ; points to the channel
+ mov a,@r0 ; Ch0
+
+ lcall readAD ; start the conversion
+
+ mov DPTR,#0fc02h ; EP8 FIFO
+ mov a,R3 ; get low byte
+ movx @DPTR,A ; store in FIFO
+ inc dptr ; next fifo entry
+ mov a,R4 ; get high byte
+ movx @DPTR,A ; store in FIFO
+
+ sjmp ep8_send ; send the data
+
+ ;; read the digital lines
+ep8_dio:
+ mov DPTR,#0fc02h ; store the contents of port B
+ mov a,IOB ; in the next
+ movx @dptr,a ; entry of the buffer
+
+ inc dptr
+ clr a ; high byte is zero
+ movx @dptr,a ; next byte of the EP
+
+ep8_send:
+ mov DPTR,#EP8BCH ; byte count H
+ mov a,#0 ; is zero
+ lcall syncdelaywr
+
+ mov DPTR,#EP8BCL ; byte count L
+ mov a,#10H ; 16 bytes
+ lcall syncdelaywr ; send the data over to the host
+
+ep8_err:
+ ret
+
+
+
+;;; EP8 interrupt: gets one measurement from the AD converter and
+;;; sends it via EP8. The channel # is stored in address 80H.
+;;; It also gets the state of the digital registers B and D.
+ep8_isr:
+ push dps
+ push dpl
+ push dph
+ push dpl1
+ push dph1
+ push acc
+ push psw
+ push 00h ; R0
+ push 01h ; R1
+ push 02h ; R2
+ push 03h ; R3
+ push 04h ; R4
+ push 05h ; R5
+ push 06h ; R6
+ push 07h ; R7
+
+ lcall ep8_ops
+
+ ;; clear INT2
+ mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
+ clr acc.4
+ mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
+
+ mov DPTR,#EPIRQ ;
+ mov a,#10000000b ; clear the ep8irq
+ movx @DPTR,a
+
+ pop 07h
+ pop 06h
+ pop 05h
+ pop 04h ; R4
+ pop 03h ; R3
+ pop 02h ; R2
+ pop 01h ; R1
+ pop 00h ; R0
+ pop psw
+ pop acc
+ pop dph1
+ pop dpl1
+ pop dph
+ pop dpl
+ pop dps
+ reti
+
+
+;; need to delay every time the byte counters
+;; for the EPs have been changed.
+
+syncdelay:
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ ret
+
+syncdelaywr:
+ movx @dptr,a
+ lcall syncdelay
+ ret
+
+
+.End
+
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-23 10:01:41 +0000