summaryrefslogtreecommitdiffstats
path: root/raddb/sites-available/default
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 14:11:00 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 14:11:00 +0000
commitaf754e596a8dbb05ed8580c342e7fe02e08b28e0 (patch)
treeb2f334c2b55ede42081aa6710a72da784547d8ea /raddb/sites-available/default
parentInitial commit. (diff)
downloadfreeradius-af754e596a8dbb05ed8580c342e7fe02e08b28e0.tar.xz
freeradius-af754e596a8dbb05ed8580c342e7fe02e08b28e0.zip
Adding upstream version 3.2.3+dfsg.upstream/3.2.3+dfsg
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'raddb/sites-available/default')
-rw-r--r--raddb/sites-available/default1159
1 files changed, 1159 insertions, 0 deletions
diff --git a/raddb/sites-available/default b/raddb/sites-available/default
new file mode 100644
index 0000000..78b7ae7
--- /dev/null
+++ b/raddb/sites-available/default
@@ -0,0 +1,1159 @@
+######################################################################
+#
+# As of 2.0.0, FreeRADIUS supports virtual hosts using the
+# "server" section, and configuration directives.
+#
+# Virtual hosts should be put into the "sites-available"
+# directory. Soft links should be created in the "sites-enabled"
+# directory to these files. This is done in a normal installation.
+#
+# If you are using 802.1X (EAP) authentication, please see also
+# the "inner-tunnel" virtual server. You will likely have to edit
+# that, too, for authentication to work.
+#
+# $Id$
+#
+######################################################################
+#
+# Read "man radiusd" before editing this file. See the section
+# titled DEBUGGING. It outlines a method where you can quickly
+# obtain the configuration you want, without running into
+# trouble. See also "man unlang", which documents the format
+# of this file.
+#
+# This configuration is designed to work in the widest possible
+# set of circumstances, with the widest possible number of
+# authentication methods. This means that in general, you should
+# need to make very few changes to this file.
+#
+# The best way to configure the server for your local system
+# is to CAREFULLY edit this file. Most attempts to make large
+# edits to this file will BREAK THE SERVER. Any edits should
+# be small, and tested by running the server with "radiusd -X".
+# Once the edits have been verified to work, save a copy of these
+# configuration files somewhere. (e.g. as a "tar" file). Then,
+# make more edits, and test, as above.
+#
+# There are many "commented out" references to modules such
+# as ldap, sql, etc. These references serve as place-holders.
+# If you need the functionality of that module, then configure
+# it in radiusd.conf, and un-comment the references to it in
+# this file. In most cases, those small changes will result
+# in the server being able to connect to the DB, and to
+# authenticate users.
+#
+######################################################################
+
+server default {
+#
+# If you want the server to listen on additional addresses, or on
+# additional ports, you can use multiple "listen" sections.
+#
+# Each section make the server listen for only one type of packet,
+# therefore authentication and accounting have to be configured in
+# different sections.
+#
+# The server ignore all "listen" section if you are using '-i' and '-p'
+# on the command line.
+#
+listen {
+ # Type of packets to listen for.
+ # Allowed values are:
+ # auth listen for authentication packets
+ # acct listen for accounting packets
+ # auth+acct listen for both authentication and accounting packets
+ # proxy IP to use for sending proxied packets
+ # detail Read from the detail file. For examples, see
+ # raddb/sites-available/copy-acct-to-home-server
+ # status listen for Status-Server packets. For examples,
+ # see raddb/sites-available/status
+ # coa listen for CoA-Request and Disconnect-Request
+ # packets. For examples, see the file
+ # raddb/sites-available/coa
+ #
+ type = auth
+
+ # Note: "type = proxy" lets you control the source IP used for
+ # proxying packets, with some limitations:
+ #
+ # * A proxy listener CANNOT be used in a virtual server section.
+ # * You should probably set "port = 0".
+ # * Any "clients" configuration will be ignored.
+ #
+ # See also proxy.conf, and the "src_ipaddr" configuration entry
+ # in the sample "home_server" section. When you specify the
+ # source IP address for packets sent to a home server, the
+ # proxy listeners are automatically created.
+
+ # ipaddr/ipv4addr/ipv6addr - IP address on which to listen.
+ # If multiple ones are listed, only the first one will
+ # be used, and the others will be ignored.
+ #
+ # The configuration options accept the following syntax:
+ #
+ # ipv4addr - IPv4 address (e.g.192.0.2.3)
+ # - wildcard (i.e. *)
+ # - hostname (radius.example.com)
+ # Only the A record for the host name is used.
+ # If there is no A record, an error is returned,
+ # and the server fails to start.
+ #
+ # ipv6addr - IPv6 address (e.g. 2001:db8::1)
+ # - wildcard (i.e. *)
+ # - hostname (radius.example.com)
+ # Only the AAAA record for the host name is used.
+ # If there is no AAAA record, an error is returned,
+ # and the server fails to start.
+ #
+ # ipaddr - IPv4 address as above
+ # - IPv6 address as above
+ # - wildcard (i.e. *), which means IPv4 wildcard.
+ # - hostname
+ # If there is only one A or AAAA record returned
+ # for the host name, it is used.
+ # If multiple A or AAAA records are returned
+ # for the host name, only the first one is used.
+ # If both A and AAAA records are returned
+ # for the host name, only the A record is used.
+ #
+ # ipv4addr = *
+ # ipv6addr = *
+ ipaddr = *
+
+ # Port on which to listen.
+ # Allowed values are:
+ # integer port number (1812)
+ # 0 means "use /etc/services for the proper port"
+ port = 0
+
+ # Some systems support binding to an interface, in addition
+ # to the IP address. This feature isn't strictly necessary,
+ # but for sites with many IP addresses on one interface,
+ # it's useful to say "listen on all addresses for eth0".
+ #
+ # If your system does not support this feature, you will
+ # get an error if you try to use it.
+ #
+# interface = eth0
+
+ # Per-socket lists of clients. This is a very useful feature.
+ #
+ # The name here is a reference to a section elsewhere in
+ # radiusd.conf, or clients.conf. Having the name as
+ # a reference allows multiple sockets to use the same
+ # set of clients.
+ #
+ # If this configuration is used, then the global list of clients
+ # is IGNORED for this "listen" section. Take care configuring
+ # this feature, to ensure you don't accidentally disable a
+ # client you need.
+ #
+ # See clients.conf for the configuration of "per_socket_clients".
+ #
+# clients = per_socket_clients
+
+ #
+ # Set the default UDP receive buffer size. In most cases,
+ # the default values set by the kernel are fine. However, in
+ # some cases the NASes will send large packets, and many of
+ # them at a time. It is then possible to overflow the
+ # buffer, causing the kernel to drop packets before they
+ # reach FreeRADIUS. Increasing the size of the buffer will
+ # avoid these packet drops.
+ #
+# recv_buff = 65536
+
+ #
+ # Connection limiting for sockets with "proto = tcp".
+ #
+ # This section is ignored for other kinds of sockets.
+ #
+ limit {
+ #
+ # Limit the number of simultaneous TCP connections to the socket
+ #
+ # The default is 16.
+ # Setting this to 0 means "no limit"
+ max_connections = 16
+
+ # The per-socket "max_requests" option does not exist.
+
+ #
+ # The lifetime, in seconds, of a TCP connection. After
+ # this lifetime, the connection will be closed.
+ #
+ # Setting this to 0 means "forever".
+ lifetime = 0
+
+ #
+ # The idle timeout, in seconds, of a TCP connection.
+ # If no packets have been received over the connection for
+ # this time, the connection will be closed.
+ #
+ # Setting this to 0 means "no timeout".
+ #
+ # We STRONGLY RECOMMEND that you set an idle timeout.
+ #
+ idle_timeout = 30
+ }
+}
+
+#
+# This second "listen" section is for listening on the accounting
+# port, too.
+#
+listen {
+ ipaddr = *
+# ipv6addr = ::
+ port = 0
+ type = acct
+# interface = eth0
+# clients = per_socket_clients
+
+ limit {
+ # The number of packets received can be rate limited via the
+ # "max_pps" configuration item. When it is set, the server
+ # tracks the total number of packets received in the previous
+ # second. If the count is greater than "max_pps", then the
+ # new packet is silently discarded. This helps the server
+ # deal with overload situations.
+ #
+ # The packets/s counter is tracked in a sliding window. This
+ # means that the pps calculation is done for the second
+ # before the current packet was received. NOT for the current
+ # wall-clock second, and NOT for the previous wall-clock second.
+ #
+ # Useful values are 0 (no limit), or 100 to 10000.
+ # Values lower than 100 will likely cause the server to ignore
+ # normal traffic. Few systems are capable of handling more than
+ # 10K packets/s.
+ #
+ # It is most useful for accounting systems. Set it to 50%
+ # more than the normal accounting load, and you can be sure that
+ # the server will never get overloaded
+ #
+# max_pps = 0
+
+ # Only for "proto = tcp". These are ignored for "udp" sockets.
+ #
+# idle_timeout = 0
+# lifetime = 0
+# max_connections = 0
+ }
+}
+
+# IPv6 versions of the above - read their full config to understand options
+listen {
+ type = auth
+ ipv6addr = :: # any. ::1 == localhost
+ port = 0
+# interface = eth0
+# clients = per_socket_clients
+ limit {
+ max_connections = 16
+ lifetime = 0
+ idle_timeout = 30
+ }
+}
+
+listen {
+ ipv6addr = ::
+ port = 0
+ type = acct
+# interface = eth0
+# clients = per_socket_clients
+
+ limit {
+# max_pps = 0
+# idle_timeout = 0
+# lifetime = 0
+# max_connections = 0
+ }
+}
+
+# Authorization. First preprocess (hints and huntgroups files),
+# then realms, and finally look in the "users" file.
+#
+# Any changes made here should also be made to the "inner-tunnel"
+# virtual server.
+#
+# The order of the realm modules will determine the order that
+# we try to find a matching realm.
+#
+# Make *sure* that 'preprocess' comes before any realm if you
+# need to setup hints for the remote radius server
+authorize {
+ #
+ # Take a User-Name, and perform some checks on it, for spaces and other
+ # invalid characters. If the User-Name appears invalid, reject the
+ # request.
+ #
+ # See policy.d/filter for the definition of the filter_username policy.
+ #
+ filter_username
+
+ #
+ # Some broken equipment sends passwords with embedded zeros.
+ # i.e. the debug output will show
+ #
+ # User-Password = "password\000\000"
+ #
+ # This policy will fix it to just be "password".
+ #
+# filter_password
+
+ #
+ # The preprocess module takes care of sanitizing some bizarre
+ # attributes in the request, and turning them into attributes
+ # which are more standard.
+ #
+ # It takes care of processing the 'raddb/mods-config/preprocess/hints'
+ # and the 'raddb/mods-config/preprocess/huntgroups' files.
+ preprocess
+
+ # If you intend to use CUI and you require that the Operator-Name
+ # be set for CUI generation and you want to generate CUI also
+ # for your local clients then uncomment the operator-name
+ # below and set the operator-name for your clients in clients.conf
+# operator-name
+
+ #
+ # If you want to generate CUI for some clients that do not
+ # send proper CUI requests, then uncomment the
+ # cui below and set "add_cui = yes" for these clients in clients.conf
+# cui
+
+ #
+ # If you want to have a log of authentication requests,
+ # un-comment the following line.
+# auth_log
+
+ #
+ # The chap module will set 'Auth-Type := CHAP' if we are
+ # handling a CHAP request and Auth-Type has not already been set
+ chap
+
+ #
+ # If the users are logging in with an MS-CHAP-Challenge
+ # attribute for authentication, the mschap module will find
+ # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
+ # to the request, which will cause the server to then use
+ # the mschap module for authentication.
+ mschap
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authenticate' section.
+ digest
+
+ #
+ # The WiMAX specification says that the Calling-Station-Id
+ # is 6 octets of the MAC. This definition conflicts with
+ # RFC 3580, and all common RADIUS practices. If you are using
+ # old style WiMAX (non LTE) the un-commenting the "wimax" module
+ # here means that it will fix the Calling-Station-Id attribute to
+ # the normal format as specified in RFC 3580 Section 3.21.
+ #
+ # If you are using WiMAX 2.1 (LTE) then un-commenting will allow
+ # the module to handle SQN resyncronisation. Prior to calling the
+ # module it is necessary to populate the following attributes
+ # with the relevant keys:
+ # control:WiMAX-SIM-Ki
+ # control:WiMAX-SIM-OPc
+ #
+ # If WiMAX-Re-synchronization-Info is found in the request then
+ # the module will attempt to extract SQN and store it in
+ # control:WiMAX-SIM-SQN. Also a copy of RAND is extracted to
+ # control:WiMAX-SIM-RAND.
+ #
+ # If the SIM cannot be authenticated using Ki and OPc then reject
+ # will be returned.
+# wimax
+
+ #
+ # Look for IPASS style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+# IPASS
+
+ #
+ # Look for realms in user@domain format
+ suffix
+# ntdomain
+
+ #
+ # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
+ # authentication.
+ #
+ # It also sets the EAP-Type attribute in the request
+ # attribute list to the EAP type from the packet.
+ #
+ # The EAP module returns "ok" or "updated" if it is not yet ready
+ # to authenticate the user. The configuration below checks for
+ # "ok", and stops processing the "authorize" section if so.
+ #
+ # Any LDAP and/or SQL servers will not be queried for the
+ # initial set of packets that go back and forth to set up
+ # TTLS or PEAP.
+ #
+ # The "updated" check is commented out for compatibility with
+ # previous versions of this configuration, but you may wish to
+ # uncomment it as well; this will further reduce the number of
+ # LDAP and/or SQL queries for TTLS or PEAP.
+ #
+ eap {
+ ok = return
+# updated = return
+ }
+
+ #
+ # Pull crypt'd passwords from /etc/passwd or /etc/shadow,
+ # using the system API's to get the password. If you want
+ # to read /etc/passwd or /etc/shadow directly, see the
+ # mods-available/passwd module.
+ #
+# unix
+
+ #
+ # Read the 'users' file. In v3, this is located in
+ # raddb/mods-config/files/authorize
+ files
+
+ #
+ # Look in an SQL database. The schema of the database
+ # is meant to mirror the "users" file.
+ #
+ # See "Authorization Queries" in mods-available/sql
+ -sql
+
+ #
+ # If you are using /etc/smbpasswd, and are also doing
+ # mschap authentication, the un-comment this line, and
+ # configure the 'smbpasswd' module.
+# smbpasswd
+
+ #
+ # The ldap module reads passwords from the LDAP database.
+ -ldap
+
+ #
+ # If you're using Active Directory and PAP, then uncomment
+ # the following lines, and the "Auth-Type LDAP" section below.
+ #
+ # This will let you do PAP authentication to AD.
+ #
+# if ((ok || updated) && User-Password && !control:Auth-Type) {
+# update control {
+# &Auth-Type := ldap
+# }
+# }
+
+ #
+ # Enforce daily limits on time spent logged in.
+# daily
+
+ #
+ expiration
+ logintime
+
+ #
+ # If no other module has claimed responsibility for
+ # authentication, then try to use PAP. This allows the
+ # other modules listed above to add a "known good" password
+ # to the request, and to do nothing else. The PAP module
+ # will then see that password, and use it to do PAP
+ # authentication.
+ #
+ # This module should be listed last, so that the other modules
+ # get a chance to set Auth-Type for themselves.
+ #
+ pap
+
+ #
+ # If "status_server = yes", then Status-Server messages are passed
+ # through the following section, and ONLY the following section.
+ # This permits you to do DB queries, for example. If the modules
+ # listed here return "fail", then NO response is sent.
+ #
+# Autz-Type Status-Server {
+#
+# }
+
+ #
+ # RADIUS/TLS (or RadSec) connections are processed through
+ # this section. See sites-available/tls, and the configuration
+ # item "check_client_connections" for more information.
+ #
+ # The request contains TLS client certificate attributes,
+ # and nothing else. The debug output will print which
+ # attributes are available on your system.
+ #
+ # If the section returns "ok" or "updated", then the
+ # connection is accepted. Otherwise the connection is
+ # terminated.
+ #
+ Autz-Type New-TLS-Connection {
+ ok
+ }
+}
+
+
+# Authentication.
+#
+#
+# This section lists which modules are available for authentication.
+# Note that it does NOT mean 'try each module in order'. It means
+# that a module from the 'authorize' section adds a configuration
+# attribute 'Auth-Type := FOO'. That authentication type is then
+# used to pick the appropriate module from the list below.
+#
+
+# In general, you SHOULD NOT set the Auth-Type attribute. The server
+# will figure it out on its own, and will do the right thing. The
+# most common side effect of erroneously setting the Auth-Type
+# attribute is that one authentication method will work, but the
+# others will not.
+#
+# The common reasons to set the Auth-Type attribute by hand
+# is to either forcibly reject the user (Auth-Type := Reject),
+# or to or forcibly accept the user (Auth-Type := Accept).
+#
+# Note that Auth-Type := Accept will NOT work with EAP.
+#
+# Please do not put "unlang" configurations into the "authenticate"
+# section. Put them in the "post-auth" section instead. That's what
+# the post-auth section is for.
+#
+authenticate {
+ #
+ # PAP authentication, when a back-end database listed
+ # in the 'authorize' section supplies a password. The
+ # password can be clear-text, or encrypted.
+ Auth-Type PAP {
+ pap
+ }
+
+ #
+ # Most people want CHAP authentication
+ # A back-end database listed in the 'authorize' section
+ # MUST supply a CLEAR TEXT password. Encrypted passwords
+ # won't work.
+ Auth-Type CHAP {
+ chap
+ }
+
+ #
+ # MSCHAP authentication.
+ Auth-Type MS-CHAP {
+ mschap
+ }
+
+ #
+ # For old names, too.
+ #
+ mschap
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authorize' section.
+ digest
+
+ #
+ # Pluggable Authentication Modules.
+# pam
+
+ # Uncomment it if you want to use ldap for authentication
+ #
+ # Note that this means "check plain-text password against
+ # the ldap database", which means that EAP won't work,
+ # as it does not supply a plain-text password.
+ #
+ # We do NOT recommend using this. LDAP servers are databases.
+ # They are NOT authentication servers. FreeRADIUS is an
+ # authentication server, and knows what to do with authentication.
+ # LDAP servers do not.
+ #
+ # However, it is necessary for Active Directory, because
+ # Active Directory won't give the passwords to FreeRADIUS.
+ #
+# Auth-Type LDAP {
+# ldap
+# }
+
+ #
+ # Allow EAP authentication.
+ eap
+
+ #
+ # The older configurations sent a number of attributes in
+ # Access-Challenge packets, which wasn't strictly correct.
+ # If you want to filter out these attributes, uncomment
+ # the following lines.
+ #
+# Auth-Type eap {
+# eap {
+# handled = 1
+# }
+# if (handled && (Response-Packet-Type == Access-Challenge)) {
+# attr_filter.access_challenge.post-auth
+# handled # override the "updated" code from attr_filter
+# }
+# }
+}
+
+
+#
+# Pre-accounting. Decide which accounting type to use.
+#
+preacct {
+ preprocess
+
+ #
+ # Merge Acct-[Input|Output]-Gigawords and Acct-[Input-Output]-Octets
+ # into a single 64bit counter Acct-[Input|Output]-Octets64.
+ #
+# acct_counters64
+
+ #
+ # Session start times are *implied* in RADIUS.
+ # The NAS never sends a "start time". Instead, it sends
+ # a start packet, *possibly* with an Acct-Delay-Time.
+ # The server is supposed to conclude that the start time
+ # was "Acct-Delay-Time" seconds in the past.
+ #
+ # The code below creates an explicit start time, which can
+ # then be used in other modules. It will be *mostly* correct.
+ # Any errors are due to the 1-second resolution of RADIUS,
+ # and the possibility that the time on the NAS may be off.
+ #
+ # The start time is: NOW - delay - session_length
+ #
+
+# update request {
+# &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}"
+# }
+
+
+ #
+ # Ensure that we have a semi-unique identifier for every
+ # request, and many NAS boxes are broken.
+ acct_unique
+
+ #
+ # Look for IPASS-style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+ #
+ # Accounting requests are generally proxied to the same
+ # home server as authentication requests.
+# IPASS
+ suffix
+# ntdomain
+
+ #
+ # Read the 'acct_users' file
+ files
+}
+
+#
+# Accounting. Log the accounting data.
+#
+accounting {
+ # Update accounting packet by adding the CUI attribute
+ # recorded from the corresponding Access-Accept
+ # use it only if your NAS boxes do not support CUI themselves
+# cui
+ #
+ # Create a 'detail'ed log of the packets.
+ # Note that accounting requests which are proxied
+ # are also logged in the detail file.
+ detail
+# daily
+
+ # Update the wtmp file
+ #
+ # If you don't use "radlast", you can delete this line.
+ unix
+
+ #
+ # For Simultaneous-Use tracking.
+ #
+ # Due to packet losses in the network, the data here
+ # may be incorrect. There is little we can do about it.
+# radutmp
+# sradutmp
+
+ #
+ # Return an address to the IP Pool when we see a stop record.
+ #
+ # Ensure that &control:Pool-Name is set to determine which
+ # pool of IPs are used.
+# sqlippool
+
+ #
+ # Log traffic to an SQL database.
+ #
+ # See "Accounting queries" in mods-available/sql
+ -sql
+
+ #
+ # If you receive stop packets with zero session length,
+ # they will NOT be logged in the database. The SQL module
+ # will print a message (only in debugging mode), and will
+ # return "noop".
+ #
+ # You can ignore these packets by uncommenting the following
+ # three lines. Otherwise, the server will not respond to the
+ # accounting request, and the NAS will retransmit.
+ #
+# if (noop) {
+# ok
+# }
+
+ # Cisco VoIP specific bulk accounting
+# pgsql-voip
+
+ # For Exec-Program and Exec-Program-Wait
+ exec
+
+ # Filter attributes from the accounting response.
+ attr_filter.accounting_response
+
+ #
+ # See "Autz-Type Status-Server" for how this works.
+ #
+# Acct-Type Status-Server {
+#
+# }
+}
+
+
+# Session database, used for checking Simultaneous-Use. Either the radutmp
+# or rlm_sql module can handle this.
+# The rlm_sql module is *much* faster
+session {
+# radutmp
+
+ #
+ # See "Simultaneous Use Checking Queries" in mods-available/sql
+# sql
+}
+
+
+# Post-Authentication
+# Once we KNOW that the user has been authenticated, there are
+# additional steps we can take.
+post-auth {
+ #
+ # If you need to have a State attribute, you can
+ # add it here. e.g. for later CoA-Request with
+ # State, and Service-Type = Authorize-Only.
+ #
+# if (!&reply:State) {
+# update reply {
+# State := "0x%{randstr:16h}"
+# }
+# }
+
+ #
+ # Reject packets where User-Name != TLS-Client-Cert-Common-Name
+ # There is no reason for users to lie about their names.
+ #
+ # In general, User-Name == EAP Identity == TLS-Client-Cert-Common-Name
+ #
+# verify_tls_client_common_name
+
+ #
+ # If there is no Stripped-User-Name in the request, AND we have a client cert,
+ # then create a Stripped-User-Name from the TLS client certificate information.
+ #
+ # Note that this policy MUST be edited for your local system!
+ # We do not know which fields exist in which certificate, as
+ # there is no standard here. There is no way for us to have
+ # a default configuration which "just works" everywhere. We
+ # can only make recommendations.
+ #
+ # The Stripped-User-Name is updated so that it is logged in
+ # the various "username" fields. This logging means that you
+ # can associate a particular session with a particular client
+ # certificate.
+ #
+# if (&EAP-Message && !&Stripped-User-Name && &TLS-Client-Cert-Serial) {
+# update request {
+# &Stripped-User-Name := "%{%{TLS-Client-Cert-Subject-Alt-Name-Email}:-%{%{TLS-Client-Cert-Common-Name}:-%{TLS-Client-Cert-Serial}}}"
+# }
+#
+ #
+ # Create a Class attribute which is a hash of a bunch
+ # of information which we hope exists. This
+ # attribute should be echoed back in
+ # Accounting-Request packets, which will let the
+ # administrator correlate authentication and
+ # accounting.
+ #
+# update reply {
+# Class += "%{md5:%{Calling-Station-Id}%{Called-Station-Id}%{TLS-Client-Cert-Subject-Alt-Name-Email}%{TLS-Client-Cert-Common-Name}%{TLS-Client-Cert-Serial}%{NAS-IPv6-Address}%{NAS-IP-Address}%{NAS-Identifier}%{NAS-Port}"
+# }
+#
+# }
+
+ #
+ # For EAP-TTLS and PEAP, add the cached attributes to the reply.
+ # The "session-state" attributes are automatically cached when
+ # an Access-Challenge is sent, and automatically retrieved
+ # when an Access-Request is received.
+ #
+ # The session-state attributes are automatically deleted after
+ # an Access-Reject or Access-Accept is sent.
+ #
+ # If both session-state and reply contain a User-Name attribute, remove
+ # the one in the reply if it is just a copy of the one in the request, so
+ # we don't end up with two User-Name attributes.
+
+ if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) {
+ update reply {
+ &User-Name !* ANY
+ }
+ }
+ update {
+ &reply: += &session-state:
+ }
+
+ #
+ # Refresh leases when we see a start or alive. Return an address to
+ # the IP Pool when we see a stop record.
+ #
+ # Ensure that &control:Pool-Name is set to determine which
+ # pool of IPs are used.
+# sqlippool
+
+
+ # Create the CUI value and add the attribute to Access-Accept.
+ # Uncomment the line below if *returning* the CUI.
+# cui
+
+ # Create empty accounting session to make simultaneous check
+ # more robust. See the accounting queries configuration in
+ # raddb/mods-config/sql/main/*/queries.conf for details.
+ #
+ # The "sql_session_start" policy is defined in
+ # raddb/policy.d/accounting. See that file for more details.
+# sql_session_start
+
+ #
+ # If you want to have a log of authentication replies,
+ # un-comment the following line, and enable the
+ # 'detail reply_log' module.
+# reply_log
+
+ #
+ # After authenticating the user, do another SQL query.
+ #
+ # See "Authentication Logging Queries" in mods-available/sql
+ -sql
+
+ #
+ # Un-comment the following if you want to modify the user's object
+ # in LDAP after a successful login.
+ #
+# ldap
+
+ # For Exec-Program and Exec-Program-Wait
+ exec
+
+ #
+ # In order to calcualate the various keys for old style WiMAX
+ # (non LTE) you will need to define the WiMAX NAI, usually via
+ #
+ # update request {
+ # &WiMAX-MN-NAI = "%{User-Name}"
+ # }
+ #
+ # If you want various keys to be calculated, you will need to
+ # update the reply with "template" values. The module will see
+ # this, and replace the template values with the correct ones
+ # taken from the cryptographic calculations. e.g.
+ #
+ # update reply {
+ # &WiMAX-FA-RK-Key = 0x00
+ # &WiMAX-MSK = "%{reply:EAP-MSK}"
+ # }
+ #
+ # You may want to delete the MS-MPPE-*-Keys from the reply,
+ # as some WiMAX clients behave badly when those attributes
+ # are included. See "raddb/modules/wimax", configuration
+ # entry "delete_mppe_keys" for more information.
+ #
+ # For LTE style WiMAX you need to populate the following with the
+ # relevant values:
+ # control:WiMAX-SIM-Ki
+ # control:WiMAX-SIM-OPc
+ # control:WiMAX-SIM-AMF
+ # control:WiMAX-SIM-SQN
+ #
+# wimax
+
+ # If there is a client certificate (EAP-TLS, sometimes PEAP
+ # and TTLS), then some attributes are filled out after the
+ # certificate verification has been performed. These fields
+ # MAY be available during the authentication, or they may be
+ # available only in the "post-auth" section.
+ #
+ # The first set of attributes contains information about the
+ # issuing certificate which is being used. The second
+ # contains information about the client certificate (if
+ # available).
+#
+# update reply {
+# Reply-Message += "%{TLS-Cert-Serial}"
+# Reply-Message += "%{TLS-Cert-Expiration}"
+# Reply-Message += "%{TLS-Cert-Subject}"
+# Reply-Message += "%{TLS-Cert-Issuer}"
+# Reply-Message += "%{TLS-Cert-Common-Name}"
+# Reply-Message += "%{TLS-Cert-Subject-Alt-Name-Email}"
+#
+# Reply-Message += "%{TLS-Client-Cert-Serial}"
+# Reply-Message += "%{TLS-Client-Cert-Expiration}"
+# Reply-Message += "%{TLS-Client-Cert-Subject}"
+# Reply-Message += "%{TLS-Client-Cert-Issuer}"
+# Reply-Message += "%{TLS-Client-Cert-Common-Name}"
+# Reply-Message += "%{TLS-Client-Cert-Subject-Alt-Name-Email}"
+# }
+
+ # Insert class attribute (with unique value) into response,
+ # aids matching auth and acct records, and protects against duplicate
+ # Acct-Session-Id. Note: Only works if the NAS has implemented
+ # RFC 2865 behaviour for the class attribute, AND if the NAS
+ # supports long Class attributes. Many older or cheap NASes
+ # only support 16-octet Class attributes.
+# insert_acct_class
+
+ # MacSEC requires the use of EAP-Key-Name. However, we don't
+ # want to send it for all EAP sessions. Therefore, the EAP
+ # modules put required data into the EAP-Session-Id attribute.
+ # This attribute is never put into a request or reply packet.
+ #
+ # Uncomment the next few lines to copy the required data into
+ # the EAP-Key-Name attribute
+# if (&reply:EAP-Session-Id) {
+# update reply {
+# EAP-Key-Name := &reply:EAP-Session-Id
+# }
+# }
+
+ # Remove reply message if the response contains an EAP-Message
+ remove_reply_message_if_eap
+
+ #
+ # Access-Reject packets are sent through the REJECT sub-section of the
+ # post-auth section.
+ #
+ # Add the ldap module name (or instance) if you have set
+ # 'edir = yes' in the ldap module configuration
+ #
+ # The "session-state" attributes are not available here.
+ #
+ Post-Auth-Type REJECT {
+ # log failed authentications in SQL, too.
+ -sql
+ attr_filter.access_reject
+
+ # Insert EAP-Failure message if the request was
+ # rejected by policy instead of because of an
+ # authentication failure
+ eap
+
+ # Remove reply message if the response contains an EAP-Message
+ remove_reply_message_if_eap
+ }
+
+ #
+ # Filter access challenges.
+ #
+ Post-Auth-Type Challenge {
+# remove_reply_message_if_eap
+# attr_filter.access_challenge.post-auth
+ }
+
+ #
+ # The Client-Lost section will be run for a request when
+ # FreeRADIUS has given up waiting for an end-users client to
+ # respond. This is most useful for logging EAP sessions where
+ # the client stopped responding (likely because the
+ # certificate was not acceptable.) i.e. this is not for
+ # RADIUS clients, but for end-user systems.
+ #
+ # This will only be triggered by new packets arriving,
+ # and will be run at some point in the future *after* the
+ # original request has been discarded.
+ #
+ # Therefore the *ONLY* attributes that are available here
+ # are those in the session-state list. If you want data
+ # to log, make sure it is copied to &session-state:
+ # before the client stops responding. NONE of the other
+ # original attributes (request, reply, etc) will be
+ # available.
+ #
+ # This section will only be run if `postauth_client_lost`
+ # is enabled in the main configuration in `radiusd.conf`.
+ #
+ # Note that there are MANY reasons why an end users system
+ # might not respond:
+ #
+ # * it could not get the packet due to firewall issues
+ # * it could not get the packet due to a lossy network
+ # * the users system might not like the servers cert
+ # * the users system might not like something else...
+ #
+ # In some cases, the client is helpful enough to send us a
+ # TLS Alert message, saying what it doesn't like about the
+ # certificate. In other cases, no such message is available.
+ #
+ # All that we can know on the FreeRADIUS side is that we sent
+ # an Access-Challenge, and the client never sent anything
+ # else. The reasons WHY this happens are buried inside of
+ # the logs on the client system. No amount of looking at the
+ # FreeRADIUS logs, or poking the FreeRADIUS configuration
+ # will tell you why the client gave up. The answers are in
+ # the logs on the client side. And no, the FreeRADIUS team
+ # didn't write the client, so we don't know where those logs
+ # are, or how to get at them.
+ #
+ # Information about the TLS state changes is in the
+ # &session-state:TLS-Session-Information attribute.
+ #
+ Post-Auth-Type Client-Lost {
+ #
+ # Debug ALL of the TLS state changes done during the
+ # EAP negotiation.
+ #
+# %{debug_attr:&session-state:TLS-Session-Information[*]}
+
+ #
+ # Debug the LAST TLS state change done during the EAP
+ # negotiation. For errors, this is usually a TLS
+ # alert from the client saying something like
+ # "unknown CA".
+ #
+# %{debug_attr:&session-state:TLS-Session-Information[n]}
+
+ #
+ # Debug the last module failure message. This may be
+ # useful, or it may refer to a server-side failure
+ # which did not cause the client to stop talking to the server.
+ #
+# %{debug_attr:&session-state:Module-Failure-Message}
+ }
+
+ #
+ # If the client sends EAP-Key-Name in the request,
+ # then echo the real value back in the reply.
+ #
+ if (EAP-Key-Name && &reply:EAP-Session-Id) {
+ update reply {
+ &EAP-Key-Name := &reply:EAP-Session-Id
+ }
+ }
+}
+
+#
+# When the server decides to proxy a request to a home server,
+# the proxied request is first passed through the pre-proxy
+# stage. This stage can re-write the request, or decide to
+# cancel the proxy.
+#
+# Only a few modules currently have this method.
+#
+pre-proxy {
+ # Before proxing the request add an Operator-Name attribute identifying
+ # if the operator-name is found for this client.
+ # No need to uncomment this if you have already enabled this in
+ # the authorize section.
+# operator-name
+
+ # The client requests the CUI by sending a CUI attribute
+ # containing one zero byte.
+ # Uncomment the line below if *requesting* the CUI.
+# cui
+
+ # Uncomment the following line if you want to change attributes
+ # as defined in the preproxy_users file.
+# files
+
+ # Uncomment the following line if you want to filter requests
+ # sent to remote servers based on the rules defined in the
+ # 'attrs.pre-proxy' file.
+# attr_filter.pre-proxy
+
+ # If you want to have a log of packets proxied to a home
+ # server, un-comment the following line, and the
+ # 'detail pre_proxy_log' section, above.
+# pre_proxy_log
+}
+
+#
+# When the server receives a reply to a request it proxied
+# to a home server, the request may be massaged here, in the
+# post-proxy stage.
+#
+post-proxy {
+
+ # If you want to have a log of replies from a home server,
+ # un-comment the following line, and the 'detail post_proxy_log'
+ # section, above.
+# post_proxy_log
+
+ # Uncomment the following line if you want to filter replies from
+ # remote proxies based on the rules defined in the 'attrs' file.
+# attr_filter.post-proxy
+
+ #
+ # If you are proxying LEAP, you MUST configure the EAP
+ # module, and you MUST list it here, in the post-proxy
+ # stage.
+ #
+ # You MUST also use the 'nostrip' option in the 'realm'
+ # configuration. Otherwise, the User-Name attribute
+ # in the proxied request will not match the user name
+ # hidden inside of the EAP packet, and the end server will
+ # reject the EAP request.
+ #
+ eap
+
+ #
+ # If the server tries to proxy a request and fails, then the
+ # request is processed through the modules in this section.
+ #
+ # The main use of this section is to permit robust proxying
+ # of accounting packets. The server can be configured to
+ # proxy accounting packets as part of normal processing.
+ # Then, if the home server goes down, accounting packets can
+ # be logged to a local "detail" file, for processing with
+ # radrelay. When the home server comes back up, radrelay
+ # will read the detail file, and send the packets to the
+ # home server.
+ #
+ # See the "mods-available/detail.example.com" file for more
+ # details on writing a detail file specifically for one
+ # destination.
+ #
+ # See the "sites-available/robust-proxy-accounting" virtual
+ # server for more details on reading this "detail" file.
+ #
+ # With this configuration, the server always responds to
+ # Accounting-Requests from the NAS, but only writes
+ # accounting packets to disk if the home server is down.
+ #
+# Post-Proxy-Type Fail-Accounting {
+# detail.example.com
+
+ #
+ # Ensure a response is sent to the NAS now that the
+ # packet has been written to a detail file.
+ #
+# acct_response
+# }
+}
+}