summaryrefslogtreecommitdiffstats
path: root/scripts/ci
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--scripts/ci/Dockerfile10
-rw-r--r--scripts/ci/Jenkinsfile66
-rwxr-xr-xscripts/ci/eapol_test-build.sh121
-rw-r--r--scripts/ci/eapol_test/.gitignore1
-rw-r--r--scripts/ci/eapol_test/config_freebsd520
-rw-r--r--scripts/ci/eapol_test/config_linux520
-rw-r--r--scripts/ci/eapol_test/config_osx515
-rw-r--r--scripts/ci/haproxy.conf16
-rwxr-xr-xscripts/ci/ldap-setup.sh51
-rw-r--r--scripts/ci/ldap/slapd.conf51
-rw-r--r--scripts/ci/ldap/slapd2.conf61
-rwxr-xr-xscripts/ci/ldap2-setup.sh63
-rwxr-xr-xscripts/ci/mysql-setup.sh19
-rwxr-xr-xscripts/ci/openresty-setup.sh144
-rw-r--r--scripts/ci/openresty/.htpasswd1
-rw-r--r--scripts/ci/openresty/auth-api.lua19
-rw-r--r--scripts/ci/openresty/delay-api.lua6
-rw-r--r--scripts/ci/openresty/json-api.lua145
-rw-r--r--scripts/ci/openresty/post-api.lua19
-rw-r--r--scripts/ci/openresty/test.txt1
-rw-r--r--scripts/ci/package-test.mk41
-rwxr-xr-xscripts/ci/postgresql-setup.sh26
-rw-r--r--scripts/ci/radsecproxy.conf33
-rw-r--r--scripts/ci/start.sh37
-rw-r--r--scripts/ci/stunnel.conf16
25 files changed, 2502 insertions, 0 deletions
diff --git a/scripts/ci/Dockerfile b/scripts/ci/Dockerfile
new file mode 100644
index 0000000..e285936
--- /dev/null
+++ b/scripts/ci/Dockerfile
@@ -0,0 +1,10 @@
+FROM ubuntu:14.04
+RUN apt-get update && apt-get install -y curl
+RUN curl -sSL "https://build.travis-ci.org/files/gpg/couchbase-precise.asc" | sudo -E apt-key add -
+RUN echo "deb http://packages.couchbase.com/ubuntu precise precise/main" | sudo tee -a /etc/apt/sources.list >/dev/null
+RUN echo "deb http://apt.llvm.org/trusty/ llvm-toolchain-trusty-5.0 main" >> /etc/apt/sources.list
+RUN curl https://raw.githubusercontent.com/travis-ci/apt-source-safelist/master/keys/llvm-toolchain-trusty-5.0.asc | apt-key add -
+RUN apt-get update && apt-get -y upgrade
+RUN apt-get -yq --no-install-suggests --no-install-recommends install autoconf build-essential debhelper devscripts dh-make doxygen fakeroot gdb graphviz lintian pbuilder python-dev quilt libruby ruby-dev libcollectdclient-dev firebird-dev freetds-dev libcap-dev libcouchbase2-libevent libcouchbase-dev libcurl4-openssl-dev libgdbm-dev libhiredis-dev libidn11-dev libiodbc2-dev libiodbc2 libjson0 libjson0-dev libkrb5-dev libldap2-dev libmemcached-dev libmysqlclient-dev libpam0g-dev libpcap-dev libpcre3-dev libperl-dev libpq-dev libreadline-dev libsnmp-dev libssl-dev libtalloc-dev libtalloc2-dbg libunbound-dev libwbclient-dev libykclient-dev libyubikey-dev clang-5.0
+RUN update-alternatives --install /usr/bin/clang clang /usr/bin/clang-5.0 100
+WORKDIR /usr/local/src/repositories
diff --git a/scripts/ci/Jenkinsfile b/scripts/ci/Jenkinsfile
new file mode 100644
index 0000000..f82fadc
--- /dev/null
+++ b/scripts/ci/Jenkinsfile
@@ -0,0 +1,66 @@
+// Initialize a variable to hold the matrix of travis builds
+tmatrix = []
+
+/* This function takes a list of tests and builds closures for each test to
+* be run in it's own docker container. It's a little strange, and uses a
+* functional programming trick (function currying) to create a closure that
+* can be passed to the "parallel" function, which can only take one argument
+* in this context
+*/
+
+def buildClosures(arg) {
+ println arg.inspect()
+ def travisTests = arg
+ def closures = [:]
+ for (value in travisTests) {
+ final valueCopy = value
+ closures[value] = { testEnv_str ->
+ def(dir,testEnv) = testEnv_str.split(":")
+ stage("$testEnv") {
+ // Docker needs full privileges and capabilites to run the tests
+ // This passes the necessary arguments to "docker run"
+ travisImage.inside("--privileged --cap-add=ALL") {
+ checkout([$class: 'GitSCM',\
+ branches: [[name: scm.branches[0].name]],\
+ doGenerateSubmoduleConfigurations: false,\
+ extensions: [[$class: 'CleanCheckout'],\
+ [$class: 'CleanBeforeCheckout'],\
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: dir]],\
+ submoduleCfg: [], userRemoteConfigs: [[url: 'https://github.com/FreeRADIUS/freeradius-server']]])
+ sh "cd $dir ; export ${testEnv} ; bash scripts/travis/start.sh"
+ }
+ }
+ }.curry(value)
+ }
+ closures
+}
+
+/* This section does three things
+* 1. Checkout the repo for the necessary setup files
+* 2. Reads the test matrix from the .travis.yml and converts it into a list that
+* can be passed to the buildClosures function
+* 3. runs each test matrix under gcc and clang in parallel.
+*/
+
+node {
+ cleanWs()
+ checkout scm
+ travis = readYaml(file: "./.travis.yml")
+ travisImage = docker.build("travis-image-${scm.branches[0].name}", "./scripts/travis/")
+ stage("clang tests") {
+ tmatrix = []
+ c = "clang"
+ travis["env"]["matrix"].eachWithIndex { t,i ->
+ tmatrix << "${c}-${i}:CC=${c} ${t}"
+ }
+ parallel buildClosures(tmatrix)
+ }
+ stage("gcc tests") {
+ tmatrix = []
+ c = "gcc"
+ travis["env"]["matrix"].eachWithIndex { t,i ->
+ tmatrix << "${c}-${i}:CC=${c} ${t}"
+ }
+ parallel buildClosures(tmatrix)
+ }
+}
diff --git a/scripts/ci/eapol_test-build.sh b/scripts/ci/eapol_test-build.sh
new file mode 100755
index 0000000..42397e2
--- /dev/null
+++ b/scripts/ci/eapol_test-build.sh
@@ -0,0 +1,121 @@
+#!/bin/bash
+
+#
+# This program is is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or (at
+# your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+#
+# Copyright 2015 Arran Cudbard-Bell <a.cudbardb@freeradius.org>
+#
+
+#
+# Extremely basic script for building eapol_test from hostapd's main branch
+#
+# On success will write progress to stderr, and a path to the eapol_test
+# binary to stdout, exiting with 0.
+#
+# On error will exit with 1.
+#
+# Note: We don't always build eapol_test. If a copy is already present on the
+# system we use that in preference. To always build eapol_test, set
+# FORCE_BUILD=1 in the environment.
+#
+
+TMP_BUILD_DIR="${BUILD_DIR}"
+: ${TMP_BUILD_DIR:="$(mktemp -d -t eapol_test.XXXXX)"}
+: ${HOSTAPD_DIR:="${TMP_BUILD_DIR}/hostapd"}
+: ${HOSTAPD_GIT_BRANCH:="hostap_2_10"}
+#: ${HOSTAPD_GIT_COMMIT:=""}
+: ${WPA_SUPPLICANT_DIR:="${HOSTAPD_DIR}/wpa_supplicant"}
+
+: ${BUILD_CONF_DIR:="$(dirname $0)/eapol_test"}
+: ${EAPOL_TEST_PATH:="${BUILD_CONF_DIR}/eapol_test"}
+
+if [ -z "${FORCE_BUILD}" ]; then
+ if [ -e "${EAPOL_TEST_PATH}" ]; then
+ echo "${EAPOL_TEST_PATH}"
+ exit 0
+ fi
+
+ WHICH_EAPOL_TEST="$(which eapol_test)"
+ if [ ! -z "${WHICH_EAPOL_TEST}" ]; then
+ echo "${WHICH_EAPOL_TEST}"
+ exit 0
+ fi
+fi
+
+#
+# If OpenSSL 3.x
+#
+if openssl version | grep -q "OpenSSL 3\."; then
+ export EAPOL_TEST_CFLAGS="${EAPOL_TEST_CFLAGS} -DOPENSSL_USE_DEPRECATED -DOPENSSL_API_COMPAT=0x10101000L"
+ echo "WARNING: Building against OpenSSL 3, setting:" 1>&2
+ echo " EAPOL_TEST_CFLAGS='${EAPOL_TEST_CFLAGS}'" 1>&2
+ echo " EAPOL_TEST_LDFLAGS='${EAPOL_TEST_LDFLAGS}'" 1>&2
+fi
+
+case "$OSTYPE" in
+linux-gnu)
+ BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_linux"
+ ;;
+
+darwin*)
+ BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_osx"
+ ;;
+
+freebsd*)
+ BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_freebsd"
+ ;;
+
+*)
+ echo "Don't have specific eapol_test build config for OS $OSTYPE. Using linux build config"
+ BUILD_CONF_FILE="${BUILD_CONF_DIR}/linux"
+ ;;
+esac
+
+if [ ! -e "${BUILD_CONF_FILE}" ]; then
+ echo "Missing build config file \"${BUILD_CONF_FILE}\" for OS $OSTYPE, please contribute one" 1>&2
+ exit 1
+fi
+
+# Shallow clone so we don't use all Jouni's bandwidth
+CLONE_DEPTH="--depth 1"
+# Unless we want a specific commit, in which case there's no way to grab it directly
+[ -z "${HOSTAPD_GIT_COMMIT}" ] || CLONE_DEPTH=""
+
+if ! [ -e "${HOSTAPD_DIR}/.git" ] && ! git clone --branch "${HOSTAPD_GIT_BRANCH}" ${CLONE_DEPTH} http://w1.fi/hostap.git 1>&2 "${TMP_BUILD_DIR}/hostapd"; then
+ echo "Failed cloning hostapd" 1>&2
+ if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi
+ exit 1
+fi
+
+if [ -n "$HOSTAPD_GIT_COMMIT" ]; then
+ if ! git --work-tree="${TMP_BUILD_DIR}/hostapd" --git-dir="${TMP_BUILD_DIR}/hostapd/.git" checkout "${HOSTAPD_GIT_COMMIT}"; then
+ echo "Unable to check out hostapd commit ${HOSTAPD_GIT_COMMIT}" 1>&2
+ if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi
+ exit 1
+ fi
+fi
+
+cp "$BUILD_CONF_FILE" "$WPA_SUPPLICANT_DIR/.config"
+
+if ! make -C "${WPA_SUPPLICANT_DIR}" -j8 eapol_test 1>&2 || [ ! -e "${WPA_SUPPLICANT_DIR}/eapol_test" ]; then
+ echo "Build error" 1>&2
+ if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi
+ exit 1
+fi
+
+cp "${WPA_SUPPLICANT_DIR}/eapol_test" "${EAPOL_TEST_PATH}"
+
+echo "${EAPOL_TEST_PATH}"
+if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi
diff --git a/scripts/ci/eapol_test/.gitignore b/scripts/ci/eapol_test/.gitignore
new file mode 100644
index 0000000..6a537cb
--- /dev/null
+++ b/scripts/ci/eapol_test/.gitignore
@@ -0,0 +1 @@
+eapol_test
diff --git a/scripts/ci/eapol_test/config_freebsd b/scripts/ci/eapol_test/config_freebsd
new file mode 100644
index 0000000..8cab937
--- /dev/null
+++ b/scripts/ci/eapol_test/config_freebsd
@@ -0,0 +1,520 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations $(EAPOL_TEST_CFLAGS)
+LIBS += $(EAPOL_TEST_LDFLAGS)
+
+#
+# Disable some warnings only against CLANG
+#
+ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
+CFLAGS += -Wno-error=void-pointer-to-enum-cast -Wno-error=ignored-qualifiers
+endif
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=n
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=n
+
+# QCA vendor extensions to nl80211
+CONFIG_DRIVER_NL80211_QCA=n
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=n
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+CONFIG_USIM_SIMULATOR=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+CONFIG_SIM_SIMULATOR=y
+
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+CONFIG_L2_PACKET=freebsd
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# EAP-FAST used to require OpenSSL patches, so it's not on by default.
+# enable it.
+CONFIG_EAP_FAST=y
diff --git a/scripts/ci/eapol_test/config_linux b/scripts/ci/eapol_test/config_linux
new file mode 100644
index 0000000..e53e05a
--- /dev/null
+++ b/scripts/ci/eapol_test/config_linux
@@ -0,0 +1,520 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations $(EAPOL_TEST_CFLAGS)
+LIBS += $(EAPOL_TEST_LDFLAGS)
+
+#
+# Disable some warnings only against CLANG
+#
+ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
+CFLAGS += -Wno-error=ignored-qualifiers
+endif
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=n
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=n
+
+# QCA vendor extensions to nl80211
+CONFIG_DRIVER_NL80211_QCA=n
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=n
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+CONFIG_USIM_SIMULATOR=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+CONFIG_SIM_SIMULATOR=y
+
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# EAP-FAST used to require OpenSSL patches, so it's not on by default.
+# enable it.
+CONFIG_EAP_FAST=y
diff --git a/scripts/ci/eapol_test/config_osx b/scripts/ci/eapol_test/config_osx
new file mode 100644
index 0000000..01dd020
--- /dev/null
+++ b/scripts/ci/eapol_test/config_osx
@@ -0,0 +1,515 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations -Wno-error=void-pointer-to-enum-cast $(EAPOL_TEST_CFLAGS)
+CFLAGS += -I/usr/local/opt/openssl/include -I/opt/homebrew/opt/openssl/include -I/usr/local/include/openssl
+
+LIBS += $(EAPOL_TEST_LDFLAGS) -L/usr/local/opt/openssl/lib -L/opt/homebrew/opt/openssl/lib -L/usr/local/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=n
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=n
+
+# QCA vendor extensions to nl80211
+CONFIG_DRIVER_NL80211_QCA=n
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=n
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+CONFIG_USIM_SIMULATOR=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+CONFIG_SIM_SIMULATOR=y
+
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+CONFIG_L2_PACKET=freebsd
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+CONFIG_OSX=y
+
+# EAP-FAST used to require OpenSSL patches, so it's not on by default.
+# enable it.
+CONFIG_EAP_FAST=y
diff --git a/scripts/ci/haproxy.conf b/scripts/ci/haproxy.conf
new file mode 100644
index 0000000..e451aed
--- /dev/null
+++ b/scripts/ci/haproxy.conf
@@ -0,0 +1,16 @@
+global
+ maxconn 100
+
+defaults
+ timeout connect 10s
+ timeout client 30s
+ timeout server 30s
+
+frontend example.org
+ bind 127.0.0.1:2084
+ default_backend radsec
+
+backend radsec
+ balance roundrobin
+ server localhost-radssec 127.0.0.1:2083 send-proxy
+
diff --git a/scripts/ci/ldap-setup.sh b/scripts/ci/ldap-setup.sh
new file mode 100755
index 0000000..ec3ba2c
--- /dev/null
+++ b/scripts/ci/ldap-setup.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# Allow setup script to work with homebrew too
+export PATH="/usr/local/opt/openldap/libexec:$PATH"
+
+# Clean out any existing DB
+rm -rf /tmp/ldap/db
+# Create directory we can write DB files to
+mkdir -p /tmp/ldap/db/
+
+# Change db location to /tmp as we can't write to /var
+sed -i -e 's/\/var\/lib\/ldap/\/tmp\/ldap\/db/' src/tests/salt-test-server/salt/ldap/base.ldif
+
+# Create a directory we can link schema files into
+if [ -d /tmp/ldap/schema ]; then
+ echo "Schema dir already linked"
+# Debian
+elif [ -d /etc/ldap/schema ]; then
+ ln -fs /etc/ldap/schema /tmp/ldap/schema
+# Redhat
+elif [ -d /etc/openldap/schema ]; then
+ ln -fs /etc/openldap/schema /tmp/ldap/schema
+# macOS (homebrew)
+elif [ -d /usr/local/etc/openldap/schema ]; then
+ ln -fs /usr/local/etc/openldap/schema /tmp/ldap/schema
+else
+ echo "Can't locate OpenLDAP schema dir"
+ exit 1
+fi
+
+# Start slapd
+slapd -h "ldap://127.0.0.1:3890/" -f scripts/ci/ldap/slapd.conf &
+
+# Wait for LDAP to start
+sleep 1
+
+# Add test data
+count=0
+while [ $count -lt 10 ] ; do
+ if ldapadd -x -H ldap://127.0.0.1:3890/ -D "cn=admin,cn=config" -w secret -f src/tests/salt-test-server/salt/ldap/base.ldif ; then
+ break 2
+ else
+ count=$((count+1))
+ sleep 1
+ fi
+done
+
+if [ $? -ne 0 ]; then
+ echo "Error configuring server"
+ exit 1
+fi
diff --git a/scripts/ci/ldap/slapd.conf b/scripts/ci/ldap/slapd.conf
new file mode 100644
index 0000000..7782616
--- /dev/null
+++ b/scripts/ci/ldap/slapd.conf
@@ -0,0 +1,51 @@
+#
+###### SAMPLE 1 - SIMPLE DIRECTORY ############
+#
+# NOTES: inetorgperson picks up attributes and objectclasses
+# from all three schemas
+#
+# NB: RH Linux schemas in /etc/openldap
+#
+include /tmp/ldap/schema/core.schema
+include /tmp/ldap/schema/cosine.schema
+include /tmp/ldap/schema/inetorgperson.schema
+include /tmp/ldap/schema/nis.schema
+include doc/schemas/ldap/openldap/freeradius.schema
+include doc/schemas/ldap/openldap/freeradius-clients.schema
+pidfile /tmp/slapd.pid
+
+# enable a lot of logging - we might need it
+# but generates huge logs
+loglevel -1
+
+# MODULELOAD definitions
+# not required (comment out) before version 2.3
+moduleload back_mdb.la
+
+database config
+rootdn "cn=admin,cn=config"
+rootpw secret
+
+#######################################################################
+# mdb database definitions
+#
+# replace example and com below with a suitable domain
+#
+# If you don't have a domain you can leave it since example.com
+# is reserved for experimentation or change them to my and inc
+#
+#######################################################################
+
+database mdb
+suffix "dc=nodomain"
+
+# root or superuser
+rootdn "cn=admin,dc=nodomain"
+rootpw secret
+# The database directory MUST exist prior to running slapd AND
+# change path as necessary
+directory /tmp/ldap/db/
+
+# other database parameters
+# read more in slapd.conf reference section
+checkpoint 128 15
diff --git a/scripts/ci/ldap/slapd2.conf b/scripts/ci/ldap/slapd2.conf
new file mode 100644
index 0000000..52c16a7
--- /dev/null
+++ b/scripts/ci/ldap/slapd2.conf
@@ -0,0 +1,61 @@
+#
+###### SAMPLE 1 - SIMPLE DIRECTORY ############
+#
+# NOTES: inetorgperson picks up attributes and objectclasses
+# from all three schemas
+#
+# NB: RH Linux schemas in /etc/openldap
+#
+include /tmp/ldap2/schema/core.schema
+include /tmp/ldap2/schema/cosine.schema
+include /tmp/ldap2/schema/inetorgperson.schema
+include /tmp/ldap2/schema/nis.schema
+include doc/schemas/ldap/openldap/freeradius.schema
+include doc/schemas/ldap/openldap/freeradius-clients.schema
+pidfile /tmp/slapd2.pid
+
+# enable a lot of logging - we might need it
+# but generates huge logs
+loglevel -1
+
+# MODULELOAD definitions
+# not required (comment out) before version 2.3
+moduleload back_mdb.la
+
+database config
+rootdn "cn=admin,cn=config"
+rootpw secret
+
+#
+# Certificates for SSL/TLS connections
+# Note - these will not match the host name so clients need to use
+# the "allow" option when checking certificates
+#
+#TLSCACertificateFile /tmp/ldap2/certs/cacert.pem
+#TLSCertificateFile /tmp/ldap2/certs/servercert.pem
+#TLSCertificateKeyFile /tmp/ldap2/certs/serverkey.pem
+
+#######################################################################
+# mdb database definitions
+#
+# replace example and com below with a suitable domain
+#
+# If you don't have a domain you can leave it since example.com
+# is reserved for experimentation or change them to my and inc
+#
+#######################################################################
+
+database mdb
+suffix "dc=nodomain"
+
+# root or superuser
+rootdn "cn=admin,dc=nodomain"
+rootpw secret
+# The database directory MUST exist prior to running slapd AND
+# change path as necessary
+directory /tmp/ldap2/db/
+
+# other database parameters
+# read more in slapd.conf reference section
+checkpoint 128 15
+
diff --git a/scripts/ci/ldap2-setup.sh b/scripts/ci/ldap2-setup.sh
new file mode 100755
index 0000000..c274414
--- /dev/null
+++ b/scripts/ci/ldap2-setup.sh
@@ -0,0 +1,63 @@
+#!/bin/sh
+
+# Allow setup script to work with homebrew too
+export PATH="/usr/local/opt/openldap/libexec:$PATH"
+
+# Clean out any existing DB
+rm -rf /tmp/ldap2/db
+# Create directory we can write DB files to
+mkdir -p /tmp/ldap2/db/
+
+# Change db location to /tmp as we can't write to /var
+sed -i -e 's/\/var\/lib\/ldap/\/tmp\/ldap2\/db/' src/tests/salt-test-server/salt/ldap/base2.ldif
+
+# Create a directory we can link schema files into
+if [ -d /tmp/ldap2/schema ]; then
+ echo "Schema dir already linked"
+# Debian
+elif [ -d /etc/ldap/schema ]; then
+ ln -fs /etc/ldap/schema /tmp/ldap2/schema
+# Redhat
+elif [ -d /etc/openldap/schema ]; then
+ ln -fs /etc/openldap/schema /tmp/ldap2/schema
+# macOS (homebrew)
+elif [ -d /usr/local/etc/openldap/schema ]; then
+ ln -fs /usr/local/etc/openldap/schema /tmp/ldap2/schema
+else
+ echo "Can't locate OpenLDAP schema dir"
+ exit 1
+fi
+
+# Clean out any old certificates
+##rm -rf /tmp/ldap2/certs
+# Create certificate directory
+##mkdir -p /tmp/ldap2/certs
+
+# Copy certificates - whilst not stricltly LDAP certs they work fine for these tests
+##cp src/tests/certs/rsa/ca.pem /tmp/ldap2/certs/cacert.pem
+##cp src/tests/certs/rsa/server.pem /tmp/ldap2/certs/servercert.pem
+# OpenLDAP wants an un-encrypted key
+##openssl rsa -in src/tests/certs/rsa/server.key -out /tmp/ldap2/certs/serverkey.pem -passin pass:whatever
+
+# Start slapd
+slapd -h "ldap://127.0.0.1:3891/" -f scripts/ci/ldap/slapd2.conf &
+
+# Wait for LDAP to start
+sleep 1
+
+# Add test data
+count=0
+while [ $count -lt 10 ] ; do
+ if ldapadd -x -H ldap://127.0.0.1:3891/ -D "cn=admin,cn=config" -w secret -f src/tests/salt-test-server/salt/ldap/base2.ldif ; then
+ break 2
+ else
+ count=$((count+1))
+ sleep 1
+ fi
+done
+
+if [ $? -ne 0 ]; then
+ echo "Error configuring server"
+ exit 1
+fi
+
diff --git a/scripts/ci/mysql-setup.sh b/scripts/ci/mysql-setup.sh
new file mode 100755
index 0000000..12e0067
--- /dev/null
+++ b/scripts/ci/mysql-setup.sh
@@ -0,0 +1,19 @@
+#!/bin/sh -e
+
+echo "MySQL - Dropping existing database"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'DROP DATABASE radius;' || true
+
+echo "MySQL - Dropping existing user"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'DROP USER radius@localhost;' || true
+
+echo "MySQL - Creating database"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'CREATE DATABASE radius;'
+
+echo "MySQL - Executing schema.sql"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root radius < raddb/mods-config/sql/main/mysql/schema.sql
+
+echo "MySQL - Executing setup.sql"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root radius < raddb/mods-config/sql/main/mysql/setup.sql
+
+echo "MySQL - Grant radius user permissions"
+mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e "GRANT ALL on radius.* TO radius@localhost; FLUSH PRIVILEGES;"
diff --git a/scripts/ci/openresty-setup.sh b/scripts/ci/openresty-setup.sh
new file mode 100755
index 0000000..eb55d67
--- /dev/null
+++ b/scripts/ci/openresty-setup.sh
@@ -0,0 +1,144 @@
+#!/bin/sh -e
+#
+# ### This is a script to setup an openresty web server for testing rlm_smtp
+#
+
+#
+# Declare the important path variables
+#
+
+# Base Directories
+BASEDIR=$(git rev-parse --show-toplevel)
+BUILDDIR="${BASEDIR}/build/ci/openresty"
+CIDIR="${BASEDIR}/scripts/ci"
+
+# Directories for openresty processes
+ROOTDIR="${BUILDDIR}/html"
+APIDIR="${BUILDDIR}/api"
+LOGDIR="${BUILDDIR}/logs"
+CERTDIR="${BUILDDIR}/certs"
+CERTSRCDIR="${BASEDIR}/raddb/restcerts"
+PASSWORD="whatever"
+
+# Important files for running openresty
+CONF="${BUILDDIR}/nginx.conf"
+
+#
+# Prepare the directories and files needed for running openresty
+#
+
+# Stop any currently running openresty instance
+echo "Checking for a running openresty instance"
+if [ -e "${LOGDIR}/nginx.pid" ]
+then
+ echo "Stopping the current openresty instance"
+ kill "$(cat ${LOGDIR}/nginx.pid)"
+ rm -r "${BUILDDIR}"
+fi
+
+# Create the directories
+mkdir -p "${BUILDDIR}" "${ROOTDIR}" "${APIDIR}" "${LOGDIR}" "${CERTDIR}"
+
+# Create the certificate
+echo "Generating the certificates"
+openssl pkcs8 -in ${CERTSRCDIR}/server.key -passin pass:${PASSWORD} -out ${CERTDIR}/server.key
+cat ${CERTSRCDIR}/server.pem ${CERTSRCDIR}/ca.pem > ${CERTDIR}/server.pem
+
+# Create nginx.conf file
+echo "Generating the openresty configuration file"
+touch "${CONF}"
+
+# Build nginx.conf
+echo "
+#
+worker_processes 1;
+error_log ${LOGDIR}/error.log;
+pid ${LOGDIR}/nginx.pid;
+
+events {
+ worker_connections 1024;
+}
+
+http {
+ include /usr/local/openresty/nginx/conf/mime.types;
+ default_type text/plain;
+
+ sendfile on;
+
+ server {
+ listen 8080;
+ server_name localhost;
+
+ location / {
+ root ${ROOTDIR};
+ index index.html;
+ }
+
+ location ~ ^/user(.*)$ {
+ default_type 'application/json';
+ add_header 'Content-Type' 'application/json';
+ content_by_lua_file ${APIDIR}/json-api.lua;
+ }
+
+ location ~ ^/post(.*)$ {
+ content_by_lua_file ${APIDIR}/post-api.lua;
+ }
+
+ location ~ ^/delay(.*)$ {
+ content_by_lua_file ${APIDIR}/delay-api.lua;
+ }
+ }
+
+ server {
+ listen 8443 ssl;
+ server_name localhost;
+
+ ssl_certificate ${CERTDIR}/server.pem;
+ ssl_certificate_key ${CERTDIR}/server.key;
+
+ ssl_session_cache shared:SSL:1m;
+ ssl_session_timeout 5m;
+
+ ssl_ciphers HIGH:!aNULL:!MD5;
+ ssl_prefer_server_ciphers on;
+
+ location / {
+ root ${ROOTDIR};
+ index index.html;
+ }
+
+ location ~ ^/user(.*)$ {
+ default_type 'application/json';
+ add_header 'Content-Type' 'application/json';
+ content_by_lua_file ${APIDIR}/json-api.lua;
+ }
+
+ location ~ ^/post(.*)$ {
+ content_by_lua_file ${APIDIR}/post-api.lua;
+ }
+
+ location ~ ^/auth(.*)$ {
+ content_by_lua_file ${APIDIR}/auth-api.lua;
+ auth_basic 'Auth Area';
+ auth_basic_user_file ${BUILDDIR}/.htpasswd;
+ }
+ }
+}
+
+" >"${CONF}"
+
+echo "Copy lua scripts into place"
+cp ${CIDIR}/openresty/*.lua "${APIDIR}"
+
+echo "Copy sample data into place"
+cp "${CIDIR}/openresty/test.txt" "${ROOTDIR}"
+
+echo "Copy htpasswd into place"
+cp "${CIDIR}/openresty/.htpasswd" "${BUILDDIR}"
+
+#
+# Run the openresty instance
+#
+echo "Starting openresty"
+openresty -c ${CONF} -p ${BUILDDIR}
+echo "Running openresty on port 8080 and 8443, accepting all local connections"
diff --git a/scripts/ci/openresty/.htpasswd b/scripts/ci/openresty/.htpasswd
new file mode 100644
index 0000000..028536a
--- /dev/null
+++ b/scripts/ci/openresty/.htpasswd
@@ -0,0 +1 @@
+Bob:$apr1$4AtMvgrH$pWCOxq7gq1N2AyeE7GT3R/
diff --git a/scripts/ci/openresty/auth-api.lua b/scripts/ci/openresty/auth-api.lua
new file mode 100644
index 0000000..8ea336c
--- /dev/null
+++ b/scripts/ci/openresty/auth-api.lua
@@ -0,0 +1,19 @@
+-- Simple API for checking POST data
+
+-- Get the request path
+local reqPath = ngx.var.uri
+-- Get the request method (POST, GET etc..)
+local reqMethod = ngx.var.request_method
+-- Get any URI arguments
+local uriArgs = ngx.req.get_uri_args()
+-- Get any POST arguments
+ngx.req.read_body()
+local postArgs = ngx.req.get_post_args()
+
+-- We only reply to POST requests
+if reqMethod ~= "POST"
+then
+ return false
+end
+
+ngx.say("Section: ", uriArgs.section, ", User: ", postArgs.user, ", Authenticated: true")
diff --git a/scripts/ci/openresty/delay-api.lua b/scripts/ci/openresty/delay-api.lua
new file mode 100644
index 0000000..aa4f61b
--- /dev/null
+++ b/scripts/ci/openresty/delay-api.lua
@@ -0,0 +1,6 @@
+-- Simple API represending a slow response for testing timeouts
+
+local t0 = os.clock()
+while os.clock() - t0 <= 2 do end
+
+ngx.say("Delayed response")
diff --git a/scripts/ci/openresty/json-api.lua b/scripts/ci/openresty/json-api.lua
new file mode 100644
index 0000000..4a574f7
--- /dev/null
+++ b/scripts/ci/openresty/json-api.lua
@@ -0,0 +1,145 @@
+-- Based on https://github.com/bambattajb/openresty-api-example
+
+-- Helper functions
+function strSplit(delim,str)
+ local t = {}
+
+ for substr in string.gmatch(str, "[^".. delim.. "]*") do
+ if substr ~= nil and string.len(substr) > 0 then
+ table.insert(t,substr)
+ end
+ end
+
+ return t
+end
+
+-- Read body being passed
+-- Required for ngx.req.get_body_data()
+ngx.req.read_body()
+-- Parser for sending JSON back to the client
+local cjson = require("cjson")
+-- Get the request path
+local reqPath = ngx.var.uri
+-- Get the request method (POST, GET etc..)
+local reqMethod = ngx.var.request_method
+-- Get any URI arguments
+local uriArgs = ngx.req.get_uri_args()
+-- Parse the body data as JSON
+local body = ngx.req.get_body_data() ==
+ -- This is like a ternary statement for Lua
+ -- It is saying if doesn't exist at least
+ -- define as empty object
+ nil and {} or cjson.decode(ngx.req.get_body_data());
+
+Api = {}
+Api.__index = Api
+-- Declare API not yet responded
+Api.responded = false;
+-- Function for checking input from client
+function Api.endpoint(method, path, callback)
+
+ -- return false if method doesn't match
+ if reqMethod ~= method
+ then
+ return false
+ end
+
+ -- If API already responded
+ if Api.responded then
+ return false
+ end
+
+ -- KeyData = params passed in path
+ local keyData = {}
+ -- Unaltered version of path
+ local origPath = reqPath
+ -- If this endpoint has params
+ if string.find(path, "<(.-)>")
+ then
+ -- Split origin and passed path sections
+ local splitPath = strSplit("/", path)
+ local splitReqPath = strSplit("/", reqPath)
+ -- Iterate over splitPath
+ for i, k in pairs(splitPath) do
+ -- If chunk contains <something>
+ if string.find(k, "<(.-)>")
+ then
+ if not splitReqPath[i] then
+ reqPath = origPath
+ return false
+ end
+ -- Add to keyData
+ keyData[string.match(k, "%<(%a+)%>")] = splitReqPath[i]
+ -- Replace matches with default for validation
+ reqPath = string.gsub(reqPath, splitReqPath[i], k)
+ end
+ end
+ end
+
+ -- return false if path doesn't match anything
+ if reqPath ~= path
+ then
+ reqPath = origPath
+ return false;
+ end
+
+ -- Make sure we don't run this again
+ Api.responded = true;
+
+ return callback(body, keyData);
+end
+
+-- Used in the accounting test
+Api.endpoint('POST', '/user/<username>/mac/<client>',
+ function(body, keyData)
+ local returnData = {}
+ returnData["control:Tmp-String-0"] = uriArgs.section
+ returnData["control:Tmp-String-1"] = {
+ reqMethod,
+ reqPath
+ }
+ returnData["control:User-Name"] = {
+ op = ":=",
+ value = keyData.username
+ }
+ returnData["control:NAS-IP-Address"] = {
+ op = "+=",
+ value = body.NAS or body['NAS-IP-Address'].value
+ }
+ returnData["control:Tmp-String-2"] = {
+ op = "^=",
+ value = keyData.username
+ }
+ return ngx.say(cjson.encode(returnData))
+ end
+)
+
+-- Used in the authorize test
+Api.endpoint('GET', '/user/<username>/mac/<client>',
+ function(body, keyData)
+ local returnData = {}
+ returnData["control:Tmp-String-0"] = uriArgs.section
+ returnData["control:Tmp-String-1"] = {
+ reqMethod,
+ reqPath
+ }
+ returnData["control:User-Name"] = {
+ op = ":=",
+ value = keyData.username
+ }
+ returnData["control:Tmp-String-2"] = {
+ op = "^=",
+ value = keyData.username
+ }
+ return ngx.say(cjson.encode(returnData))
+ end
+)
+
+-- Simple reflection of a URI argument
+Api.endpoint('GET', '/user/<username>/reflect/',
+ function(body, keyData)
+ local returnData = {}
+ returnData["station"] = uriArgs.station
+ return ngx.say(cjson.encode(returnData))
+ end
+)
diff --git a/scripts/ci/openresty/post-api.lua b/scripts/ci/openresty/post-api.lua
new file mode 100644
index 0000000..3f22960
--- /dev/null
+++ b/scripts/ci/openresty/post-api.lua
@@ -0,0 +1,19 @@
+-- Simple API for checking POST data
+
+-- Get the request path
+local reqPath = ngx.var.uri
+-- Get the request method (POST, GET etc..)
+local reqMethod = ngx.var.request_method
+-- Get any URI arguments
+local uriArgs = ngx.req.get_uri_args()
+-- Get any POST arguments
+ngx.req.read_body()
+local postArgs = ngx.req.get_post_args()
+
+-- We only reply to POST requests
+if reqMethod ~= "POST"
+then
+ return false
+end
+
+ngx.say("Section: ", uriArgs.section, ", User: ", postArgs.user)
diff --git a/scripts/ci/openresty/test.txt b/scripts/ci/openresty/test.txt
new file mode 100644
index 0000000..eceb6ed
--- /dev/null
+++ b/scripts/ci/openresty/test.txt
@@ -0,0 +1 @@
+Sample text response
diff --git a/scripts/ci/package-test.mk b/scripts/ci/package-test.mk
new file mode 100644
index 0000000..417784b
--- /dev/null
+++ b/scripts/ci/package-test.mk
@@ -0,0 +1,41 @@
+#
+# This Makefile performs some end to end tests against a package installed
+# within the CI environment.
+#
+# It reuses the eapol_test build-time tests, but runs them against the assets
+# installed by the distribution packaging.
+#
+# We want the run-time environment to be lean, typical of a fresh system
+# installation so that we catch any missing runtime dependancies, assets
+# missing from the packages, issues with the dynamic loader, etc.
+#
+# Therefore we skip the usual build framework so that we do not have so
+# configure the build tree and so that our only dependency is some non-ancient
+# version GNU Make. (Any version in a supported distribution will do.)
+#
+
+#
+# For the package tests we use the system version of radiusd on the standard
+# port
+#
+RADIUSD_BIN := $(shell which radiusd || which freeradius)
+PORT := 1812
+SECRET := testing123
+DICT_PATH := /usr/share/freeradius
+
+ifneq (,$(wildcard /etc/raddb/radiusd.conf))
+RADDB_PATH := /etc/raddb/
+else
+RADDB_PATH := /etc/freeradius/
+endif
+
+#
+# We prefer to use our exactly eapol_test version
+#
+EAPOL_TEST := $(shell ./scripts/ci/eapol_test-build.sh)
+
+MAKE_ARGS := RADIUSD_BIN=$(RADIUSD_BIN) PORT=$(PORT) SECRET="$(SECRET)" DICT_PATH=$(DICT_PATH) RADDB_PATH=$(RADDB_PATH)
+
+.PHONY: package-test
+package-test:
+ $(MAKE) -C src/tests $(MAKE_ARGS) tests.eap
diff --git a/scripts/ci/postgresql-setup.sh b/scripts/ci/postgresql-setup.sh
new file mode 100755
index 0000000..1e1abfb
--- /dev/null
+++ b/scripts/ci/postgresql-setup.sh
@@ -0,0 +1,26 @@
+#!/bin/sh -e
+
+#
+# To initialise on MacOS
+# sudo brew install postgresql
+# pg_ctl -D /usr/local/var/postgres start
+# /usr/local/opt/postgres/bin/createuser -s postgres
+#
+
+echo "Dropping existing database"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'drop database radius;' -U postgres || true
+
+echo "Dropping existing database"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'drop user radius;' -U postgres || true
+
+echo "PostgreSQL - Creating database"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'create database radius;' -U postgres || true
+
+echo "PostgreSQL - Execute schema.sql"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -U postgres radius < raddb/mods-config/sql/main/postgresql/schema.sql
+
+echo "PostgreSQL - Execute setup.sql"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -U postgres radius < raddb/mods-config/sql/main/postgresql/setup.sql
+
+echo "PostgreSQL - Grant radius user permissions"
+psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'GRANT ALL PRIVILEGES ON ALL TABLES IN SCHEMA public TO radius;' -U postgres radius
diff --git a/scripts/ci/radsecproxy.conf b/scripts/ci/radsecproxy.conf
new file mode 100644
index 0000000..c6df5d1
--- /dev/null
+++ b/scripts/ci/radsecproxy.conf
@@ -0,0 +1,33 @@
+# radsecproxy -f -c radsecproxy.conf
+
+# If there's no ListenUDP config, then radsecproxy will listen on *:1812 by default. <sigh>
+ListenUDP *:1816
+
+tls default {
+ CACertificateFile ../../raddb/certs/CA.pem
+
+ # You must specify the below for TLS, we always present our certificate
+ CertificateFile ../../raddb/certs/client.pem
+ CertificateKeyFile ../../raddb/certs/client.key
+
+ # Optionally specify password if key is encrypted (not very secure)
+ CertificateKeyPassword "whatever"
+}
+
+client 127.0.0.1 {
+ type udp
+ secret testing123
+}
+
+server 127.0.0.1 {
+ type tls
+ port 2084
+ secret radsec
+
+ CertificateNameCheck off
+}
+
+
+realm * {
+ server 127.0.0.1
+}
diff --git a/scripts/ci/start.sh b/scripts/ci/start.sh
new file mode 100644
index 0000000..0408068
--- /dev/null
+++ b/scripts/ci/start.sh
@@ -0,0 +1,37 @@
+##TODO rip this apart into "configure , make , make deb, make scan and make install" functions
+export PANIC_ACTION="gdb -batch -x raddb/panic.gdb %e %p 1>&0 2>&0"
+
+#Configure
+if [ "${DO_BUILD}" = 'yes' ]; then
+ CFLAGS="${BUILD_CFLAGS}" ./configure -C\
+ --enable-werror \
+ --prefix=$HOME/freeradius\
+ --with-shared-libs=$LIBS_SHARED \
+ --with-threads=$LIBS_OPTIONAL \
+ --with-udpfromto=$LIBS_OPTIONAL \
+ --with-openssl=$LIBS_OPTIONAL \
+ --with-pcre=$LIBS_OPTIONAL \
+ --enable-reproducible-builds=${REPRODUCIBLE}
+fi
+
+if [ "${DO_BUILD}" = 'no' ]; then
+ ./configure -C --without-modules
+fi
+
+# Make
+if [ "${DO_BUILD}" = 'yes' ]; then
+ make -j8
+fi
+
+# Make scan
+if [ "${DO_BUILD}" = 'yes' -a ${CC} = 'clang' ]; then
+ make -j8 scan && [ "$(find build/plist/ -name *.html)" = '' ]
+fi
+
+if [ "${DO_BUILD}" = 'yes' ]; then
+ make ci-test
+fi
+
+if [ "${DO_BUILD}" = 'no' ]; then
+ cd doc/source; doxygen 3>&1 1>&2 2>&3 | grep -iv '^warning:' | tee doxygen_stderr.log && [ ! -n "$(cat doxygen_stderr.log)" ]
+fi
diff --git a/scripts/ci/stunnel.conf b/scripts/ci/stunnel.conf
new file mode 100644
index 0000000..a312d66
--- /dev/null
+++ b/scripts/ci/stunnel.conf
@@ -0,0 +1,16 @@
+;
+; Run via:
+;
+; stunnel stunnel.conf
+;
+; You will be prompted for the password. Type "whatever".
+;
+foreground = yes
+
+[radsec]
+client = yes
+accept = 127.0.0.1:20830
+connect = 127.0.0.1:2083
+cert = ../../raddb/certs/client.pem
+key = ../../raddb/certs/client.key
+;protocol=proxy