diff options
Diffstat (limited to 'scripts/ci')
25 files changed, 2502 insertions, 0 deletions
diff --git a/scripts/ci/Dockerfile b/scripts/ci/Dockerfile new file mode 100644 index 0000000..e285936 --- /dev/null +++ b/scripts/ci/Dockerfile @@ -0,0 +1,10 @@ +FROM ubuntu:14.04 +RUN apt-get update && apt-get install -y curl +RUN curl -sSL "https://build.travis-ci.org/files/gpg/couchbase-precise.asc" | sudo -E apt-key add - +RUN echo "deb http://packages.couchbase.com/ubuntu precise precise/main" | sudo tee -a /etc/apt/sources.list >/dev/null +RUN echo "deb http://apt.llvm.org/trusty/ llvm-toolchain-trusty-5.0 main" >> /etc/apt/sources.list +RUN curl https://raw.githubusercontent.com/travis-ci/apt-source-safelist/master/keys/llvm-toolchain-trusty-5.0.asc | apt-key add - +RUN apt-get update && apt-get -y upgrade +RUN apt-get -yq --no-install-suggests --no-install-recommends install autoconf build-essential debhelper devscripts dh-make doxygen fakeroot gdb graphviz lintian pbuilder python-dev quilt libruby ruby-dev libcollectdclient-dev firebird-dev freetds-dev libcap-dev libcouchbase2-libevent libcouchbase-dev libcurl4-openssl-dev libgdbm-dev libhiredis-dev libidn11-dev libiodbc2-dev libiodbc2 libjson0 libjson0-dev libkrb5-dev libldap2-dev libmemcached-dev libmysqlclient-dev libpam0g-dev libpcap-dev libpcre3-dev libperl-dev libpq-dev libreadline-dev libsnmp-dev libssl-dev libtalloc-dev libtalloc2-dbg libunbound-dev libwbclient-dev libykclient-dev libyubikey-dev clang-5.0 +RUN update-alternatives --install /usr/bin/clang clang /usr/bin/clang-5.0 100 +WORKDIR /usr/local/src/repositories diff --git a/scripts/ci/Jenkinsfile b/scripts/ci/Jenkinsfile new file mode 100644 index 0000000..f82fadc --- /dev/null +++ b/scripts/ci/Jenkinsfile @@ -0,0 +1,66 @@ +// Initialize a variable to hold the matrix of travis builds +tmatrix = [] + +/* This function takes a list of tests and builds closures for each test to +* be run in it's own docker container. It's a little strange, and uses a +* functional programming trick (function currying) to create a closure that +* can be passed to the "parallel" function, which can only take one argument +* in this context +*/ + +def buildClosures(arg) { + println arg.inspect() + def travisTests = arg + def closures = [:] + for (value in travisTests) { + final valueCopy = value + closures[value] = { testEnv_str -> + def(dir,testEnv) = testEnv_str.split(":") + stage("$testEnv") { + // Docker needs full privileges and capabilites to run the tests + // This passes the necessary arguments to "docker run" + travisImage.inside("--privileged --cap-add=ALL") { + checkout([$class: 'GitSCM',\ + branches: [[name: scm.branches[0].name]],\ + doGenerateSubmoduleConfigurations: false,\ + extensions: [[$class: 'CleanCheckout'],\ + [$class: 'CleanBeforeCheckout'],\ + [$class: 'RelativeTargetDirectory', relativeTargetDir: dir]],\ + submoduleCfg: [], userRemoteConfigs: [[url: 'https://github.com/FreeRADIUS/freeradius-server']]]) + sh "cd $dir ; export ${testEnv} ; bash scripts/travis/start.sh" + } + } + }.curry(value) + } + closures +} + +/* This section does three things +* 1. Checkout the repo for the necessary setup files +* 2. Reads the test matrix from the .travis.yml and converts it into a list that +* can be passed to the buildClosures function +* 3. runs each test matrix under gcc and clang in parallel. +*/ + +node { + cleanWs() + checkout scm + travis = readYaml(file: "./.travis.yml") + travisImage = docker.build("travis-image-${scm.branches[0].name}", "./scripts/travis/") + stage("clang tests") { + tmatrix = [] + c = "clang" + travis["env"]["matrix"].eachWithIndex { t,i -> + tmatrix << "${c}-${i}:CC=${c} ${t}" + } + parallel buildClosures(tmatrix) + } + stage("gcc tests") { + tmatrix = [] + c = "gcc" + travis["env"]["matrix"].eachWithIndex { t,i -> + tmatrix << "${c}-${i}:CC=${c} ${t}" + } + parallel buildClosures(tmatrix) + } +} diff --git a/scripts/ci/eapol_test-build.sh b/scripts/ci/eapol_test-build.sh new file mode 100755 index 0000000..42397e2 --- /dev/null +++ b/scripts/ci/eapol_test-build.sh @@ -0,0 +1,121 @@ +#!/bin/bash + +# +# This program is is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or (at +# your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA +# +# Copyright 2015 Arran Cudbard-Bell <a.cudbardb@freeradius.org> +# + +# +# Extremely basic script for building eapol_test from hostapd's main branch +# +# On success will write progress to stderr, and a path to the eapol_test +# binary to stdout, exiting with 0. +# +# On error will exit with 1. +# +# Note: We don't always build eapol_test. If a copy is already present on the +# system we use that in preference. To always build eapol_test, set +# FORCE_BUILD=1 in the environment. +# + +TMP_BUILD_DIR="${BUILD_DIR}" +: ${TMP_BUILD_DIR:="$(mktemp -d -t eapol_test.XXXXX)"} +: ${HOSTAPD_DIR:="${TMP_BUILD_DIR}/hostapd"} +: ${HOSTAPD_GIT_BRANCH:="hostap_2_10"} +#: ${HOSTAPD_GIT_COMMIT:=""} +: ${WPA_SUPPLICANT_DIR:="${HOSTAPD_DIR}/wpa_supplicant"} + +: ${BUILD_CONF_DIR:="$(dirname $0)/eapol_test"} +: ${EAPOL_TEST_PATH:="${BUILD_CONF_DIR}/eapol_test"} + +if [ -z "${FORCE_BUILD}" ]; then + if [ -e "${EAPOL_TEST_PATH}" ]; then + echo "${EAPOL_TEST_PATH}" + exit 0 + fi + + WHICH_EAPOL_TEST="$(which eapol_test)" + if [ ! -z "${WHICH_EAPOL_TEST}" ]; then + echo "${WHICH_EAPOL_TEST}" + exit 0 + fi +fi + +# +# If OpenSSL 3.x +# +if openssl version | grep -q "OpenSSL 3\."; then + export EAPOL_TEST_CFLAGS="${EAPOL_TEST_CFLAGS} -DOPENSSL_USE_DEPRECATED -DOPENSSL_API_COMPAT=0x10101000L" + echo "WARNING: Building against OpenSSL 3, setting:" 1>&2 + echo " EAPOL_TEST_CFLAGS='${EAPOL_TEST_CFLAGS}'" 1>&2 + echo " EAPOL_TEST_LDFLAGS='${EAPOL_TEST_LDFLAGS}'" 1>&2 +fi + +case "$OSTYPE" in +linux-gnu) + BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_linux" + ;; + +darwin*) + BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_osx" + ;; + +freebsd*) + BUILD_CONF_FILE="${BUILD_CONF_DIR}/config_freebsd" + ;; + +*) + echo "Don't have specific eapol_test build config for OS $OSTYPE. Using linux build config" + BUILD_CONF_FILE="${BUILD_CONF_DIR}/linux" + ;; +esac + +if [ ! -e "${BUILD_CONF_FILE}" ]; then + echo "Missing build config file \"${BUILD_CONF_FILE}\" for OS $OSTYPE, please contribute one" 1>&2 + exit 1 +fi + +# Shallow clone so we don't use all Jouni's bandwidth +CLONE_DEPTH="--depth 1" +# Unless we want a specific commit, in which case there's no way to grab it directly +[ -z "${HOSTAPD_GIT_COMMIT}" ] || CLONE_DEPTH="" + +if ! [ -e "${HOSTAPD_DIR}/.git" ] && ! git clone --branch "${HOSTAPD_GIT_BRANCH}" ${CLONE_DEPTH} http://w1.fi/hostap.git 1>&2 "${TMP_BUILD_DIR}/hostapd"; then + echo "Failed cloning hostapd" 1>&2 + if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi + exit 1 +fi + +if [ -n "$HOSTAPD_GIT_COMMIT" ]; then + if ! git --work-tree="${TMP_BUILD_DIR}/hostapd" --git-dir="${TMP_BUILD_DIR}/hostapd/.git" checkout "${HOSTAPD_GIT_COMMIT}"; then + echo "Unable to check out hostapd commit ${HOSTAPD_GIT_COMMIT}" 1>&2 + if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi + exit 1 + fi +fi + +cp "$BUILD_CONF_FILE" "$WPA_SUPPLICANT_DIR/.config" + +if ! make -C "${WPA_SUPPLICANT_DIR}" -j8 eapol_test 1>&2 || [ ! -e "${WPA_SUPPLICANT_DIR}/eapol_test" ]; then + echo "Build error" 1>&2 + if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi + exit 1 +fi + +cp "${WPA_SUPPLICANT_DIR}/eapol_test" "${EAPOL_TEST_PATH}" + +echo "${EAPOL_TEST_PATH}" +if [ -z "${BUILD_DIR}" ]; then rm -rf "$TMP_BUILD_DIR"; fi diff --git a/scripts/ci/eapol_test/.gitignore b/scripts/ci/eapol_test/.gitignore new file mode 100644 index 0000000..6a537cb --- /dev/null +++ b/scripts/ci/eapol_test/.gitignore @@ -0,0 +1 @@ +eapol_test diff --git a/scripts/ci/eapol_test/config_freebsd b/scripts/ci/eapol_test/config_freebsd new file mode 100644 index 0000000..8cab937 --- /dev/null +++ b/scripts/ci/eapol_test/config_freebsd @@ -0,0 +1,520 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations $(EAPOL_TEST_CFLAGS) +LIBS += $(EAPOL_TEST_LDFLAGS) + +# +# Disable some warnings only against CLANG +# +ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) +CFLAGS += -Wno-error=void-pointer-to-enum-cast -Wno-error=ignored-qualifiers +endif + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. +CONFIG_DRIVER_WEXT=n + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=n + +# QCA vendor extensions to nl80211 +CONFIG_DRIVER_NL80211_QCA=n + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$<path to libnl include files> +#LIBS += -L$<path to libnl library files> + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +#CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +CONFIG_EAP_PWD=y + +# EAP-PAX +CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=n + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +CONFIG_USIM_SIMULATOR=y + +# Enable SIM simulator (Milenage) for EAP-SIM +CONFIG_SIM_SIMULATOR=y + +# EAP-SAKE +CONFIG_EAP_SAKE=y + +# EAP-GPSK +CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +CONFIG_EAP_IKEV2=y + +# EAP-EKE +CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +CONFIG_L2_PACKET=freebsd + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e<entropy file> command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +#CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +#CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +#CONFIG_OSX=y + +# EAP-FAST used to require OpenSSL patches, so it's not on by default. +# enable it. +CONFIG_EAP_FAST=y diff --git a/scripts/ci/eapol_test/config_linux b/scripts/ci/eapol_test/config_linux new file mode 100644 index 0000000..e53e05a --- /dev/null +++ b/scripts/ci/eapol_test/config_linux @@ -0,0 +1,520 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations $(EAPOL_TEST_CFLAGS) +LIBS += $(EAPOL_TEST_LDFLAGS) + +# +# Disable some warnings only against CLANG +# +ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) +CFLAGS += -Wno-error=ignored-qualifiers +endif + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. +CONFIG_DRIVER_WEXT=n + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=n + +# QCA vendor extensions to nl80211 +CONFIG_DRIVER_NL80211_QCA=n + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$<path to libnl include files> +#LIBS += -L$<path to libnl library files> + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +CONFIG_EAP_PWD=y + +# EAP-PAX +CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=n + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +CONFIG_USIM_SIMULATOR=y + +# Enable SIM simulator (Milenage) for EAP-SIM +CONFIG_SIM_SIMULATOR=y + +# EAP-SAKE +CONFIG_EAP_SAKE=y + +# EAP-GPSK +CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +CONFIG_EAP_IKEV2=y + +# EAP-EKE +CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e<entropy file> command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +#CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +#CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +#CONFIG_OSX=y + +# EAP-FAST used to require OpenSSL patches, so it's not on by default. +# enable it. +CONFIG_EAP_FAST=y diff --git a/scripts/ci/eapol_test/config_osx b/scripts/ci/eapol_test/config_osx new file mode 100644 index 0000000..01dd020 --- /dev/null +++ b/scripts/ci/eapol_test/config_osx @@ -0,0 +1,515 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS += -g3 -O0 -Wno-error=deprecated-declarations -Wno-error=void-pointer-to-enum-cast $(EAPOL_TEST_CFLAGS) +CFLAGS += -I/usr/local/opt/openssl/include -I/opt/homebrew/opt/openssl/include -I/usr/local/include/openssl + +LIBS += $(EAPOL_TEST_LDFLAGS) -L/usr/local/opt/openssl/lib -L/opt/homebrew/opt/openssl/lib -L/usr/local/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. +CONFIG_DRIVER_WEXT=n + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=n + +# QCA vendor extensions to nl80211 +CONFIG_DRIVER_NL80211_QCA=n + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$<path to libnl include files> +#LIBS += -L$<path to libnl library files> + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +#CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +CONFIG_EAP_PWD=y + +# EAP-PAX +CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=n + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +CONFIG_USIM_SIMULATOR=y + +# Enable SIM simulator (Milenage) for EAP-SIM +CONFIG_SIM_SIMULATOR=y + +# EAP-SAKE +CONFIG_EAP_SAKE=y + +# EAP-GPSK +CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +CONFIG_EAP_IKEV2=y + +# EAP-EKE +CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +CONFIG_L2_PACKET=freebsd + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e<entropy file> command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +#CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +#CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +CONFIG_OSX=y + +# EAP-FAST used to require OpenSSL patches, so it's not on by default. +# enable it. +CONFIG_EAP_FAST=y diff --git a/scripts/ci/haproxy.conf b/scripts/ci/haproxy.conf new file mode 100644 index 0000000..e451aed --- /dev/null +++ b/scripts/ci/haproxy.conf @@ -0,0 +1,16 @@ +global + maxconn 100 + +defaults + timeout connect 10s + timeout client 30s + timeout server 30s + +frontend example.org + bind 127.0.0.1:2084 + default_backend radsec + +backend radsec + balance roundrobin + server localhost-radssec 127.0.0.1:2083 send-proxy + diff --git a/scripts/ci/ldap-setup.sh b/scripts/ci/ldap-setup.sh new file mode 100755 index 0000000..ec3ba2c --- /dev/null +++ b/scripts/ci/ldap-setup.sh @@ -0,0 +1,51 @@ +#!/bin/sh + +# Allow setup script to work with homebrew too +export PATH="/usr/local/opt/openldap/libexec:$PATH" + +# Clean out any existing DB +rm -rf /tmp/ldap/db +# Create directory we can write DB files to +mkdir -p /tmp/ldap/db/ + +# Change db location to /tmp as we can't write to /var +sed -i -e 's/\/var\/lib\/ldap/\/tmp\/ldap\/db/' src/tests/salt-test-server/salt/ldap/base.ldif + +# Create a directory we can link schema files into +if [ -d /tmp/ldap/schema ]; then + echo "Schema dir already linked" +# Debian +elif [ -d /etc/ldap/schema ]; then + ln -fs /etc/ldap/schema /tmp/ldap/schema +# Redhat +elif [ -d /etc/openldap/schema ]; then + ln -fs /etc/openldap/schema /tmp/ldap/schema +# macOS (homebrew) +elif [ -d /usr/local/etc/openldap/schema ]; then + ln -fs /usr/local/etc/openldap/schema /tmp/ldap/schema +else + echo "Can't locate OpenLDAP schema dir" + exit 1 +fi + +# Start slapd +slapd -h "ldap://127.0.0.1:3890/" -f scripts/ci/ldap/slapd.conf & + +# Wait for LDAP to start +sleep 1 + +# Add test data +count=0 +while [ $count -lt 10 ] ; do + if ldapadd -x -H ldap://127.0.0.1:3890/ -D "cn=admin,cn=config" -w secret -f src/tests/salt-test-server/salt/ldap/base.ldif ; then + break 2 + else + count=$((count+1)) + sleep 1 + fi +done + +if [ $? -ne 0 ]; then + echo "Error configuring server" + exit 1 +fi diff --git a/scripts/ci/ldap/slapd.conf b/scripts/ci/ldap/slapd.conf new file mode 100644 index 0000000..7782616 --- /dev/null +++ b/scripts/ci/ldap/slapd.conf @@ -0,0 +1,51 @@ +# +###### SAMPLE 1 - SIMPLE DIRECTORY ############ +# +# NOTES: inetorgperson picks up attributes and objectclasses +# from all three schemas +# +# NB: RH Linux schemas in /etc/openldap +# +include /tmp/ldap/schema/core.schema +include /tmp/ldap/schema/cosine.schema +include /tmp/ldap/schema/inetorgperson.schema +include /tmp/ldap/schema/nis.schema +include doc/schemas/ldap/openldap/freeradius.schema +include doc/schemas/ldap/openldap/freeradius-clients.schema +pidfile /tmp/slapd.pid + +# enable a lot of logging - we might need it +# but generates huge logs +loglevel -1 + +# MODULELOAD definitions +# not required (comment out) before version 2.3 +moduleload back_mdb.la + +database config +rootdn "cn=admin,cn=config" +rootpw secret + +####################################################################### +# mdb database definitions +# +# replace example and com below with a suitable domain +# +# If you don't have a domain you can leave it since example.com +# is reserved for experimentation or change them to my and inc +# +####################################################################### + +database mdb +suffix "dc=nodomain" + +# root or superuser +rootdn "cn=admin,dc=nodomain" +rootpw secret +# The database directory MUST exist prior to running slapd AND +# change path as necessary +directory /tmp/ldap/db/ + +# other database parameters +# read more in slapd.conf reference section +checkpoint 128 15 diff --git a/scripts/ci/ldap/slapd2.conf b/scripts/ci/ldap/slapd2.conf new file mode 100644 index 0000000..52c16a7 --- /dev/null +++ b/scripts/ci/ldap/slapd2.conf @@ -0,0 +1,61 @@ +# +###### SAMPLE 1 - SIMPLE DIRECTORY ############ +# +# NOTES: inetorgperson picks up attributes and objectclasses +# from all three schemas +# +# NB: RH Linux schemas in /etc/openldap +# +include /tmp/ldap2/schema/core.schema +include /tmp/ldap2/schema/cosine.schema +include /tmp/ldap2/schema/inetorgperson.schema +include /tmp/ldap2/schema/nis.schema +include doc/schemas/ldap/openldap/freeradius.schema +include doc/schemas/ldap/openldap/freeradius-clients.schema +pidfile /tmp/slapd2.pid + +# enable a lot of logging - we might need it +# but generates huge logs +loglevel -1 + +# MODULELOAD definitions +# not required (comment out) before version 2.3 +moduleload back_mdb.la + +database config +rootdn "cn=admin,cn=config" +rootpw secret + +# +# Certificates for SSL/TLS connections +# Note - these will not match the host name so clients need to use +# the "allow" option when checking certificates +# +#TLSCACertificateFile /tmp/ldap2/certs/cacert.pem +#TLSCertificateFile /tmp/ldap2/certs/servercert.pem +#TLSCertificateKeyFile /tmp/ldap2/certs/serverkey.pem + +####################################################################### +# mdb database definitions +# +# replace example and com below with a suitable domain +# +# If you don't have a domain you can leave it since example.com +# is reserved for experimentation or change them to my and inc +# +####################################################################### + +database mdb +suffix "dc=nodomain" + +# root or superuser +rootdn "cn=admin,dc=nodomain" +rootpw secret +# The database directory MUST exist prior to running slapd AND +# change path as necessary +directory /tmp/ldap2/db/ + +# other database parameters +# read more in slapd.conf reference section +checkpoint 128 15 + diff --git a/scripts/ci/ldap2-setup.sh b/scripts/ci/ldap2-setup.sh new file mode 100755 index 0000000..c274414 --- /dev/null +++ b/scripts/ci/ldap2-setup.sh @@ -0,0 +1,63 @@ +#!/bin/sh + +# Allow setup script to work with homebrew too +export PATH="/usr/local/opt/openldap/libexec:$PATH" + +# Clean out any existing DB +rm -rf /tmp/ldap2/db +# Create directory we can write DB files to +mkdir -p /tmp/ldap2/db/ + +# Change db location to /tmp as we can't write to /var +sed -i -e 's/\/var\/lib\/ldap/\/tmp\/ldap2\/db/' src/tests/salt-test-server/salt/ldap/base2.ldif + +# Create a directory we can link schema files into +if [ -d /tmp/ldap2/schema ]; then + echo "Schema dir already linked" +# Debian +elif [ -d /etc/ldap/schema ]; then + ln -fs /etc/ldap/schema /tmp/ldap2/schema +# Redhat +elif [ -d /etc/openldap/schema ]; then + ln -fs /etc/openldap/schema /tmp/ldap2/schema +# macOS (homebrew) +elif [ -d /usr/local/etc/openldap/schema ]; then + ln -fs /usr/local/etc/openldap/schema /tmp/ldap2/schema +else + echo "Can't locate OpenLDAP schema dir" + exit 1 +fi + +# Clean out any old certificates +##rm -rf /tmp/ldap2/certs +# Create certificate directory +##mkdir -p /tmp/ldap2/certs + +# Copy certificates - whilst not stricltly LDAP certs they work fine for these tests +##cp src/tests/certs/rsa/ca.pem /tmp/ldap2/certs/cacert.pem +##cp src/tests/certs/rsa/server.pem /tmp/ldap2/certs/servercert.pem +# OpenLDAP wants an un-encrypted key +##openssl rsa -in src/tests/certs/rsa/server.key -out /tmp/ldap2/certs/serverkey.pem -passin pass:whatever + +# Start slapd +slapd -h "ldap://127.0.0.1:3891/" -f scripts/ci/ldap/slapd2.conf & + +# Wait for LDAP to start +sleep 1 + +# Add test data +count=0 +while [ $count -lt 10 ] ; do + if ldapadd -x -H ldap://127.0.0.1:3891/ -D "cn=admin,cn=config" -w secret -f src/tests/salt-test-server/salt/ldap/base2.ldif ; then + break 2 + else + count=$((count+1)) + sleep 1 + fi +done + +if [ $? -ne 0 ]; then + echo "Error configuring server" + exit 1 +fi + diff --git a/scripts/ci/mysql-setup.sh b/scripts/ci/mysql-setup.sh new file mode 100755 index 0000000..12e0067 --- /dev/null +++ b/scripts/ci/mysql-setup.sh @@ -0,0 +1,19 @@ +#!/bin/sh -e + +echo "MySQL - Dropping existing database" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'DROP DATABASE radius;' || true + +echo "MySQL - Dropping existing user" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'DROP USER radius@localhost;' || true + +echo "MySQL - Creating database" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e 'CREATE DATABASE radius;' + +echo "MySQL - Executing schema.sql" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root radius < raddb/mods-config/sql/main/mysql/schema.sql + +echo "MySQL - Executing setup.sql" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root radius < raddb/mods-config/sql/main/mysql/setup.sql + +echo "MySQL - Grant radius user permissions" +mysql -h "${SQL_MYSQL_TEST_SERVER}" -u root -e "GRANT ALL on radius.* TO radius@localhost; FLUSH PRIVILEGES;" diff --git a/scripts/ci/openresty-setup.sh b/scripts/ci/openresty-setup.sh new file mode 100755 index 0000000..eb55d67 --- /dev/null +++ b/scripts/ci/openresty-setup.sh @@ -0,0 +1,144 @@ +#!/bin/sh -e +# +# ### This is a script to setup an openresty web server for testing rlm_smtp +# + +# +# Declare the important path variables +# + +# Base Directories +BASEDIR=$(git rev-parse --show-toplevel) +BUILDDIR="${BASEDIR}/build/ci/openresty" +CIDIR="${BASEDIR}/scripts/ci" + +# Directories for openresty processes +ROOTDIR="${BUILDDIR}/html" +APIDIR="${BUILDDIR}/api" +LOGDIR="${BUILDDIR}/logs" +CERTDIR="${BUILDDIR}/certs" +CERTSRCDIR="${BASEDIR}/raddb/restcerts" +PASSWORD="whatever" + +# Important files for running openresty +CONF="${BUILDDIR}/nginx.conf" + +# +# Prepare the directories and files needed for running openresty +# + +# Stop any currently running openresty instance +echo "Checking for a running openresty instance" +if [ -e "${LOGDIR}/nginx.pid" ] +then + echo "Stopping the current openresty instance" + kill "$(cat ${LOGDIR}/nginx.pid)" + rm -r "${BUILDDIR}" +fi + +# Create the directories +mkdir -p "${BUILDDIR}" "${ROOTDIR}" "${APIDIR}" "${LOGDIR}" "${CERTDIR}" + +# Create the certificate +echo "Generating the certificates" +openssl pkcs8 -in ${CERTSRCDIR}/server.key -passin pass:${PASSWORD} -out ${CERTDIR}/server.key +cat ${CERTSRCDIR}/server.pem ${CERTSRCDIR}/ca.pem > ${CERTDIR}/server.pem + +# Create nginx.conf file +echo "Generating the openresty configuration file" +touch "${CONF}" + +# Build nginx.conf +echo " +# +worker_processes 1; +error_log ${LOGDIR}/error.log; +pid ${LOGDIR}/nginx.pid; + +events { + worker_connections 1024; +} + +http { + include /usr/local/openresty/nginx/conf/mime.types; + default_type text/plain; + + sendfile on; + + server { + listen 8080; + server_name localhost; + + location / { + root ${ROOTDIR}; + index index.html; + } + + location ~ ^/user(.*)$ { + default_type 'application/json'; + add_header 'Content-Type' 'application/json'; + content_by_lua_file ${APIDIR}/json-api.lua; + } + + location ~ ^/post(.*)$ { + content_by_lua_file ${APIDIR}/post-api.lua; + } + + location ~ ^/delay(.*)$ { + content_by_lua_file ${APIDIR}/delay-api.lua; + } + } + + server { + listen 8443 ssl; + server_name localhost; + + ssl_certificate ${CERTDIR}/server.pem; + ssl_certificate_key ${CERTDIR}/server.key; + + ssl_session_cache shared:SSL:1m; + ssl_session_timeout 5m; + + ssl_ciphers HIGH:!aNULL:!MD5; + ssl_prefer_server_ciphers on; + + location / { + root ${ROOTDIR}; + index index.html; + } + + location ~ ^/user(.*)$ { + default_type 'application/json'; + add_header 'Content-Type' 'application/json'; + content_by_lua_file ${APIDIR}/json-api.lua; + } + + location ~ ^/post(.*)$ { + content_by_lua_file ${APIDIR}/post-api.lua; + } + + location ~ ^/auth(.*)$ { + content_by_lua_file ${APIDIR}/auth-api.lua; + auth_basic 'Auth Area'; + auth_basic_user_file ${BUILDDIR}/.htpasswd; + } + } +} + +" >"${CONF}" + +echo "Copy lua scripts into place" +cp ${CIDIR}/openresty/*.lua "${APIDIR}" + +echo "Copy sample data into place" +cp "${CIDIR}/openresty/test.txt" "${ROOTDIR}" + +echo "Copy htpasswd into place" +cp "${CIDIR}/openresty/.htpasswd" "${BUILDDIR}" + +# +# Run the openresty instance +# +echo "Starting openresty" +openresty -c ${CONF} -p ${BUILDDIR} +echo "Running openresty on port 8080 and 8443, accepting all local connections" diff --git a/scripts/ci/openresty/.htpasswd b/scripts/ci/openresty/.htpasswd new file mode 100644 index 0000000..028536a --- /dev/null +++ b/scripts/ci/openresty/.htpasswd @@ -0,0 +1 @@ +Bob:$apr1$4AtMvgrH$pWCOxq7gq1N2AyeE7GT3R/ diff --git a/scripts/ci/openresty/auth-api.lua b/scripts/ci/openresty/auth-api.lua new file mode 100644 index 0000000..8ea336c --- /dev/null +++ b/scripts/ci/openresty/auth-api.lua @@ -0,0 +1,19 @@ +-- Simple API for checking POST data + +-- Get the request path +local reqPath = ngx.var.uri +-- Get the request method (POST, GET etc..) +local reqMethod = ngx.var.request_method +-- Get any URI arguments +local uriArgs = ngx.req.get_uri_args() +-- Get any POST arguments +ngx.req.read_body() +local postArgs = ngx.req.get_post_args() + +-- We only reply to POST requests +if reqMethod ~= "POST" +then + return false +end + +ngx.say("Section: ", uriArgs.section, ", User: ", postArgs.user, ", Authenticated: true") diff --git a/scripts/ci/openresty/delay-api.lua b/scripts/ci/openresty/delay-api.lua new file mode 100644 index 0000000..aa4f61b --- /dev/null +++ b/scripts/ci/openresty/delay-api.lua @@ -0,0 +1,6 @@ +-- Simple API represending a slow response for testing timeouts + +local t0 = os.clock() +while os.clock() - t0 <= 2 do end + +ngx.say("Delayed response") diff --git a/scripts/ci/openresty/json-api.lua b/scripts/ci/openresty/json-api.lua new file mode 100644 index 0000000..4a574f7 --- /dev/null +++ b/scripts/ci/openresty/json-api.lua @@ -0,0 +1,145 @@ +-- Based on https://github.com/bambattajb/openresty-api-example + +-- Helper functions +function strSplit(delim,str) + local t = {} + + for substr in string.gmatch(str, "[^".. delim.. "]*") do + if substr ~= nil and string.len(substr) > 0 then + table.insert(t,substr) + end + end + + return t +end + +-- Read body being passed +-- Required for ngx.req.get_body_data() +ngx.req.read_body() +-- Parser for sending JSON back to the client +local cjson = require("cjson") +-- Get the request path +local reqPath = ngx.var.uri +-- Get the request method (POST, GET etc..) +local reqMethod = ngx.var.request_method +-- Get any URI arguments +local uriArgs = ngx.req.get_uri_args() +-- Parse the body data as JSON +local body = ngx.req.get_body_data() == + -- This is like a ternary statement for Lua + -- It is saying if doesn't exist at least + -- define as empty object + nil and {} or cjson.decode(ngx.req.get_body_data()); + +Api = {} +Api.__index = Api +-- Declare API not yet responded +Api.responded = false; +-- Function for checking input from client +function Api.endpoint(method, path, callback) + + -- return false if method doesn't match + if reqMethod ~= method + then + return false + end + + -- If API already responded + if Api.responded then + return false + end + + -- KeyData = params passed in path + local keyData = {} + -- Unaltered version of path + local origPath = reqPath + -- If this endpoint has params + if string.find(path, "<(.-)>") + then + -- Split origin and passed path sections + local splitPath = strSplit("/", path) + local splitReqPath = strSplit("/", reqPath) + -- Iterate over splitPath + for i, k in pairs(splitPath) do + -- If chunk contains <something> + if string.find(k, "<(.-)>") + then + if not splitReqPath[i] then + reqPath = origPath + return false + end + -- Add to keyData + keyData[string.match(k, "%<(%a+)%>")] = splitReqPath[i] + -- Replace matches with default for validation + reqPath = string.gsub(reqPath, splitReqPath[i], k) + end + end + end + + -- return false if path doesn't match anything + if reqPath ~= path + then + reqPath = origPath + return false; + end + + -- Make sure we don't run this again + Api.responded = true; + + return callback(body, keyData); +end + +-- Used in the accounting test +Api.endpoint('POST', '/user/<username>/mac/<client>', + function(body, keyData) + local returnData = {} + returnData["control:Tmp-String-0"] = uriArgs.section + returnData["control:Tmp-String-1"] = { + reqMethod, + reqPath + } + returnData["control:User-Name"] = { + op = ":=", + value = keyData.username + } + returnData["control:NAS-IP-Address"] = { + op = "+=", + value = body.NAS or body['NAS-IP-Address'].value + } + returnData["control:Tmp-String-2"] = { + op = "^=", + value = keyData.username + } + return ngx.say(cjson.encode(returnData)) + end +) + +-- Used in the authorize test +Api.endpoint('GET', '/user/<username>/mac/<client>', + function(body, keyData) + local returnData = {} + returnData["control:Tmp-String-0"] = uriArgs.section + returnData["control:Tmp-String-1"] = { + reqMethod, + reqPath + } + returnData["control:User-Name"] = { + op = ":=", + value = keyData.username + } + returnData["control:Tmp-String-2"] = { + op = "^=", + value = keyData.username + } + return ngx.say(cjson.encode(returnData)) + end +) + +-- Simple reflection of a URI argument +Api.endpoint('GET', '/user/<username>/reflect/', + function(body, keyData) + local returnData = {} + returnData["station"] = uriArgs.station + return ngx.say(cjson.encode(returnData)) + end +) diff --git a/scripts/ci/openresty/post-api.lua b/scripts/ci/openresty/post-api.lua new file mode 100644 index 0000000..3f22960 --- /dev/null +++ b/scripts/ci/openresty/post-api.lua @@ -0,0 +1,19 @@ +-- Simple API for checking POST data + +-- Get the request path +local reqPath = ngx.var.uri +-- Get the request method (POST, GET etc..) +local reqMethod = ngx.var.request_method +-- Get any URI arguments +local uriArgs = ngx.req.get_uri_args() +-- Get any POST arguments +ngx.req.read_body() +local postArgs = ngx.req.get_post_args() + +-- We only reply to POST requests +if reqMethod ~= "POST" +then + return false +end + +ngx.say("Section: ", uriArgs.section, ", User: ", postArgs.user) diff --git a/scripts/ci/openresty/test.txt b/scripts/ci/openresty/test.txt new file mode 100644 index 0000000..eceb6ed --- /dev/null +++ b/scripts/ci/openresty/test.txt @@ -0,0 +1 @@ +Sample text response diff --git a/scripts/ci/package-test.mk b/scripts/ci/package-test.mk new file mode 100644 index 0000000..417784b --- /dev/null +++ b/scripts/ci/package-test.mk @@ -0,0 +1,41 @@ +# +# This Makefile performs some end to end tests against a package installed +# within the CI environment. +# +# It reuses the eapol_test build-time tests, but runs them against the assets +# installed by the distribution packaging. +# +# We want the run-time environment to be lean, typical of a fresh system +# installation so that we catch any missing runtime dependancies, assets +# missing from the packages, issues with the dynamic loader, etc. +# +# Therefore we skip the usual build framework so that we do not have so +# configure the build tree and so that our only dependency is some non-ancient +# version GNU Make. (Any version in a supported distribution will do.) +# + +# +# For the package tests we use the system version of radiusd on the standard +# port +# +RADIUSD_BIN := $(shell which radiusd || which freeradius) +PORT := 1812 +SECRET := testing123 +DICT_PATH := /usr/share/freeradius + +ifneq (,$(wildcard /etc/raddb/radiusd.conf)) +RADDB_PATH := /etc/raddb/ +else +RADDB_PATH := /etc/freeradius/ +endif + +# +# We prefer to use our exactly eapol_test version +# +EAPOL_TEST := $(shell ./scripts/ci/eapol_test-build.sh) + +MAKE_ARGS := RADIUSD_BIN=$(RADIUSD_BIN) PORT=$(PORT) SECRET="$(SECRET)" DICT_PATH=$(DICT_PATH) RADDB_PATH=$(RADDB_PATH) + +.PHONY: package-test +package-test: + $(MAKE) -C src/tests $(MAKE_ARGS) tests.eap diff --git a/scripts/ci/postgresql-setup.sh b/scripts/ci/postgresql-setup.sh new file mode 100755 index 0000000..1e1abfb --- /dev/null +++ b/scripts/ci/postgresql-setup.sh @@ -0,0 +1,26 @@ +#!/bin/sh -e + +# +# To initialise on MacOS +# sudo brew install postgresql +# pg_ctl -D /usr/local/var/postgres start +# /usr/local/opt/postgres/bin/createuser -s postgres +# + +echo "Dropping existing database" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'drop database radius;' -U postgres || true + +echo "Dropping existing database" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'drop user radius;' -U postgres || true + +echo "PostgreSQL - Creating database" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'create database radius;' -U postgres || true + +echo "PostgreSQL - Execute schema.sql" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -U postgres radius < raddb/mods-config/sql/main/postgresql/schema.sql + +echo "PostgreSQL - Execute setup.sql" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -U postgres radius < raddb/mods-config/sql/main/postgresql/setup.sql + +echo "PostgreSQL - Grant radius user permissions" +psql -h "${SQL_POSTGRESQL_TEST_SERVER}" -c 'GRANT ALL PRIVILEGES ON ALL TABLES IN SCHEMA public TO radius;' -U postgres radius diff --git a/scripts/ci/radsecproxy.conf b/scripts/ci/radsecproxy.conf new file mode 100644 index 0000000..c6df5d1 --- /dev/null +++ b/scripts/ci/radsecproxy.conf @@ -0,0 +1,33 @@ +# radsecproxy -f -c radsecproxy.conf + +# If there's no ListenUDP config, then radsecproxy will listen on *:1812 by default. <sigh> +ListenUDP *:1816 + +tls default { + CACertificateFile ../../raddb/certs/CA.pem + + # You must specify the below for TLS, we always present our certificate + CertificateFile ../../raddb/certs/client.pem + CertificateKeyFile ../../raddb/certs/client.key + + # Optionally specify password if key is encrypted (not very secure) + CertificateKeyPassword "whatever" +} + +client 127.0.0.1 { + type udp + secret testing123 +} + +server 127.0.0.1 { + type tls + port 2084 + secret radsec + + CertificateNameCheck off +} + + +realm * { + server 127.0.0.1 +} diff --git a/scripts/ci/start.sh b/scripts/ci/start.sh new file mode 100644 index 0000000..0408068 --- /dev/null +++ b/scripts/ci/start.sh @@ -0,0 +1,37 @@ +##TODO rip this apart into "configure , make , make deb, make scan and make install" functions +export PANIC_ACTION="gdb -batch -x raddb/panic.gdb %e %p 1>&0 2>&0" + +#Configure +if [ "${DO_BUILD}" = 'yes' ]; then + CFLAGS="${BUILD_CFLAGS}" ./configure -C\ + --enable-werror \ + --prefix=$HOME/freeradius\ + --with-shared-libs=$LIBS_SHARED \ + --with-threads=$LIBS_OPTIONAL \ + --with-udpfromto=$LIBS_OPTIONAL \ + --with-openssl=$LIBS_OPTIONAL \ + --with-pcre=$LIBS_OPTIONAL \ + --enable-reproducible-builds=${REPRODUCIBLE} +fi + +if [ "${DO_BUILD}" = 'no' ]; then + ./configure -C --without-modules +fi + +# Make +if [ "${DO_BUILD}" = 'yes' ]; then + make -j8 +fi + +# Make scan +if [ "${DO_BUILD}" = 'yes' -a ${CC} = 'clang' ]; then + make -j8 scan && [ "$(find build/plist/ -name *.html)" = '' ] +fi + +if [ "${DO_BUILD}" = 'yes' ]; then + make ci-test +fi + +if [ "${DO_BUILD}" = 'no' ]; then + cd doc/source; doxygen 3>&1 1>&2 2>&3 | grep -iv '^warning:' | tee doxygen_stderr.log && [ ! -n "$(cat doxygen_stderr.log)" ] +fi diff --git a/scripts/ci/stunnel.conf b/scripts/ci/stunnel.conf new file mode 100644 index 0000000..a312d66 --- /dev/null +++ b/scripts/ci/stunnel.conf @@ -0,0 +1,16 @@ +; +; Run via: +; +; stunnel stunnel.conf +; +; You will be prompted for the password. Type "whatever". +; +foreground = yes + +[radsec] +client = yes +accept = 127.0.0.1:20830 +connect = 127.0.0.1:2083 +cert = ../../raddb/certs/client.pem +key = ../../raddb/certs/client.key +;protocol=proxy |