# -*- text -*-
#
#  main/mssql/queries.conf -- MSSQL configuration for default schema (schema.sql)
#
#  $Id$

# Safe characters list for sql queries. Everything else is replaced
# with their mime-encoded equivalents.
# The default list should be ok
#safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"

#######################################################################
#  Query config:  Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'.  '%{SQL-User-Name}' should be used
# below everywhere a username substitution is needed so you you can
# be sure the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
#    Use Stripped-User-Name, if it's there.
#    Else use User-Name, if it's there,
#    Else use hard-coded string "none" as the user name.
#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-none}}"
#
sql_user_name = "%{User-Name}"

#######################################################################
#  Query config:  Event-Timestamp
#######################################################################
# event_timestamp_epoch is the basis for the time inserted into
# accounting records. Typically this will be the Event-Timestamp of the
# accounting request, which is usually provided by a NAS.
#
# Uncomment the next line, if you want the timestamp to be based on the
# request reception time recorded by this server, for example if you
# distrust the provided Event-Timestamp.
#event_timestamp_epoch = "%l"

event_timestamp_epoch = "%{%{integer:Event-Timestamp}:-%l}"

# event_timestamp is the SQL snippet for converting an epoch timestamp
# to an SQL date.

event_timestamp = "DATEADD(SS, ${event_timestamp_epoch}, '19700101')"

#######################################################################
#  Query config:  Class attribute
#######################################################################
#
#  3.0.22 and later have a "class" column in the accounting table.
#
#  However, we do NOT want to break existing configurations by adding
#  the Class attribute to the default queries.  If we did that, then
#  systems using newer versions of the server would fail, because
#  there is no "class" column in their accounting tables.
#
#  The solution to that is the following "class" subsection.  If your
#  database has a "class" column for the various tables, then you can
#  uncomment the configuration items here.  The queries below will
#  then automatically insert the Class attribute into radacct,
#  radpostauth, etc.
#
class {
	#
	#  Delete the '#' character from each of the configuration
	#  items in this section.  This change puts the Class
	#  attribute into the various tables.  Leave the double-quoted
	#  string there, as the value for the configuration item.
	#
	#  See also policy.d/accounting, and the "insert_acct_class"
	#  policy.  You will need to list (or uncomment)
	#  "insert_acct_class" in the "post-auth" section in order to
	#  create a Class attribute.
	#
	column_name =	# ", class"
	packet_xlat =	# ", '%{Class}'"
	reply_xlat =	# ", '%{reply:Class}'"
}

#######################################################################
#  Authorization Queries
#######################################################################
#  These queries compare the check items for the user
#  in ${authcheck_table} and setup the reply items in
#  ${authreply_table}.  You can use any query/tables
#  you want, but the return data for each row MUST
#  be in the  following order:
#
#  0. Row ID (currently unused)
#  1. UserName/GroupName
#  2. Item Attr Name
#  3. Item Attr Value
#  4. Item Attr Operation
#######################################################################
# Query for case sensitive usernames was removed. Please contact with me,
# if you know analog of STRCMP functions for MS SQL.

authorize_check_query = "\
	SELECT id, UserName, Attribute, Value, op \
	FROM ${authcheck_table} \
	WHERE Username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_reply_query = "\
	SELECT id, UserName, Attribute, Value, op \
	FROM ${authreply_table} \
	WHERE Username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_group_check_query = "\
	SELECT \
		${groupcheck_table}.id,${groupcheck_table}.GroupName, \
		${groupcheck_table}.Attribute,${groupcheck_table}.Value, \
		${groupcheck_table}.op \
	FROM ${groupcheck_table},${usergroup_table} \
	WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
	AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName \
	ORDER BY ${groupcheck_table}.id"

authorize_group_reply_query = "\
	SELECT \
		${groupreply_table}.id, ${groupreply_table}.GroupName, \
		${groupreply_table}.Attribute,${groupreply_table}.Value, \
		${groupreply_table}.op \
	FROM ${groupreply_table},${usergroup_table} \
	WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
	AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName \
	ORDER BY ${groupreply_table}.id"

group_membership_query = "\
	SELECT groupname \
	FROM ${usergroup_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY priority"

#######################################################################
#  Simultaneous Use Checking Queries
#######################################################################
#  simul_count_query	- query for the number of current connections
#			- If this is not defined, no simultaneous use checking
#			- will be performed by this module instance
#  simul_verify_query	- query to return details of current connections
#				for verification
#			- Leave blank or commented out to disable verification step
#			- Note that the returned field order should not be changed.
#######################################################################

simul_count_query = "\
	SELECT COUNT(*) \
	FROM ${acct_table1} \
	WHERE UserName = '%{SQL-User-Name}' \
	AND AcctStopTime = 0"

simul_verify_query = "\
	SELECT \
		RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, \
		CallingStationId, FramedProtocol \
	FROM ${acct_table1} \
	WHERE UserName = '%{SQL-User-Name}' \
	AND AcctStopTime = 0"

#######################################################################
# Accounting and Post-Auth Queries
#######################################################################
# These queries insert/update accounting and authentication records.
# The query to use is determined by the value of 'reference'.
# This value is used as a configuration path and should resolve to one
# or more 'query's. If reference points to multiple queries, and a query
# fails, the next query is executed.
#
# Behaviour is identical to the old 1.x/2.x module, except we can now
# fail between N queries, and query selection can be based on any
# combination of attributes, or custom 'Acct-Status-Type' values.
#######################################################################
accounting {
	reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"

	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/accounting.sql

	type {
		accounting-on {
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctStopTime=${....event_timestamp}, \
					AcctSessionTime=${....event_timestamp_epoch} - \
						DATEDIFF(SS, '1970-01-01', AcctStartTime), \
					AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', \
					AcctStopDelay = %{%{Acct-Delay-Time}:-0} \
				WHERE AcctStopTime = 0 \
				AND NASIPAddress = '%{NAS-IP-Address}' \
				AND AcctStartTime <= ${....event_timestamp}"
		}

		accounting-off {
			query = "${..accounting-on.query}"
		}

		#
		#  Implement the "sql_session_start" policy.
		#  See raddb/policy.d/accounting for more details.
		#
		#  You also need to fix the other queries as
		#  documented below.  Look for "sql_session_start".
		#
		post-auth {
			query = "\
			INSERT INTO ${....acct_table1} \
				INSERT INTO ${....acct_table1} ( \
					AcctSessionId, \
					AcctUniqueId, \
					UserName, \
					Realm, \
					NASIPAddress, \
					NASPortId, \
					NASPortType, \
					AcctStartTime, \
					AcctSessionTime, \
					AcctUpdateTime, \
					AcctAuthentic, \
					ConnectInfo_start, \
					ConnectInfo_stop, \
					AcctInputOctets, \
					AcctOutputOctets, \
					CalledStationId, \
					CallingStationId, \
					AcctTerminateCause, \
					ServiceType, \
					FramedProtocol, \
					FramedIPAddress, \
					FramedIPv6Address, \
					FramedIPv6Prefix, \
					FramedInterfaceId, \
					DelegatedIPv6Prefix \
					${....class.column_name}) \
			VALUES(\
				'%{Acct-Session-Id}', \
				'%{Acct-Unique-Session-Id}', \
				'%{SQL-User-Name}', \
				'%{Realm}', \
				'%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', \
				'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
				'%{NAS-Port-Type}', \
				${....event_timestamp}, \
				${....event_timestamp}, \
				0, \
				'', \
				'%{Connect-Info}', \
				'', \
				0, \
				0, \
				'%{Called-Station-Id}', \
				'%{Calling-Station-Id}', \
				'', \
				'%{Service-Type}', \
				'', \
				'', \
				'', \
				'', \
				'', \
				'' \
				${....class.packet_xlat})"

			query = "\
				UPDATE ${....acct_table1} SET \
					AcctStartTime = '%S', \
					ConnectInfo_start = '%{Connect-Info}', \
					AcctSessionId = '%{Acct-Session-Id}' \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime = 0"
		}

		start {
			query = "\
				INSERT INTO ${....acct_table1} ( \
					AcctSessionId, \
					AcctUniqueId, \
					UserName, \
					Realm, \
					NASIPAddress, \
					NASPortId, \
					NASPortType, \
					AcctStartTime, \
					AcctUpdateTime, \
					AcctSessionTime, \
					AcctAuthentic, \
					ConnectInfo_start, \
					ConnectInfo_stop, \
					AcctInputOctets, \
					AcctOutputOctets, \
					CalledStationId, \
					CallingStationId, \
					AcctTerminateCause, \
					ServiceType, \
					FramedProtocol, \
					FramedIPAddress, \
					FramedIPv6Address, \
					FramedIPv6Prefix, \
					FramedInterfaceId, \
					DelegatedIPv6Prefix, \
					AcctStartDelay, \
					AcctStopDelay \
					${....class.column_name}) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					${....event_timestamp}, \
					${....event_timestamp}, \
					'0', \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					'0', \
					'0', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}', \
					'%{Acct-Delay-Time}', \
					'0' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					FramedIpAddress = '%{Framed-IP-Address}', \
					FramedIpv6Address = '%{Framed-IPv6-Address}', \
					FramedIpv6Prefix = '%{Framed-IPv6-Prefix}', \
					FramedInterfaceId = '%{Framed-Interface-Id}', \
					DelegatedIpv6Prefix = '%{Delegated-IPv6-Prefix}', \
					AcctStartTime = ${....event_timestamp}, \
					AcctUpdateTime = ${....event_timestamp} \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime = 0"

			query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctStartTime = ${....event_timestamp}, \
					AcctUpdateTime = ${....event_timestamp }, \
					AcctStartDelay = '%{%{Acct-Delay-Time}:-0}', \
					ConnectInfo_start = '%{Connect-Info}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
				AND AcctStopTime = 0"
		}

		interim-update {
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctInterval = DATEDIFF(second, CASE WHEN AcctUpdateTime > 0 THEN AcctUpdateTime ELSE AcctStartTime END, ${....event_timestamp}), \
					AcctUpdateTime = ${....event_timestamp}, \
					AcctSessionTime = '%{Acct-Session-Time}', \
					AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
					FramedIPAddress = '%{Framed-IP-Address}', \
					FramedIPv6Address = '%{Framed-IPv6-Address}', \
					FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
					FramedInterfaceId = '%{Framed-Interface-Id}', \
					DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
				AND AcctStopTime = 0"

			query = "\
				INSERT INTO ${....acct_table1} ( \
					AcctSessionId, \
					AcctUniqueId, \
					UserName, \
					Realm, \
					NASIPAddress, \
					NASPortId, \
					NASPortType, \
					AcctStartTime, \
					AcctUpdateTime, \
					AcctSessionTime, \
					AcctAuthentic, \
					ConnectInfo_start, \
					AcctInputOctets, \
					AcctOutputOctets, \
					CalledStationId, \
					CallingStationId, \
					ServiceType, \
					FramedProtocol, \
					FramedIPAddress, \
					FramedIPv6Address, \
					FramedIPv6Prefix, \
					FramedInterfaceId, \
					DelegatedIPv6Prefix, \
					AcctStartDelay \
					${....class.column_name}) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					${....event_timestamp}, \
					${....event_timestamp}, \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'', \
					'%{Acct-Input-Octets}', \
					'%{Acct-Output-Octets}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}', \
					'0' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					FramedIPAddress = '%{Framed-IP-Address}', \
					FramedIPv6Address = '%{Framed-IPv6-Address}', \
					FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
					FramedInterfaceId = '%{Framed-Interface-Id}', \
					DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}', \
					AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}' \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime = 0"
		}

		stop {
			query = "\
				UPDATE ${....acct_table2} \
				SET \
					AcctStopTime = ${....event_timestamp}, \
					AcctSessionTime = '%{Acct-Session-Time}', \
					AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
					AcctTerminateCause = '%{Acct-Terminate-Cause}', \
					AcctStopDelay = '%{%{Acct-Delay-Time}:-0}', \
					ConnectInfo_stop = '%{Connect-Info}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
				AND AcctStopTime = 0"

			query = "\
				INSERT into ${....acct_table2} (\
					AcctSessionId, \
					AcctUniqueId, \
					UserName, \
					Realm, \
					NASIPAddress, \
					NASPortID, \
					NASPortType, \
					AcctStopTime, \
					AcctSessionTime, \
					AcctAuthentic, \
					ConnectInfo_start, \
					ConnectInfo_stop, \
					AcctInputOctets, \
					AcctOutputOctets, \
					CalledStationId, \
					CallingStationId, \
					AcctTerminateCause, \
					ServiceType, \
					FramedProtocol,	\
					FramedIPAddress, \
					FramedIPv6Address, \
					FramedIPv6Prefix, \
					FramedInterfaceId, \
					DelegatedIPv6Prefix, \
					AcctStartDelay, \
					AcctStopDelay \
					${....class.column_name}) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					${....event_timestamp}, \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'', \
					'%{Connect-Info}', \
					convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
					convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Acct-Terminate-Cause}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}', \
					'0', \
					'%{%{Acct-Delay-Time}:-0}' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					FramedIPAddress = '%{Framed-IP-Address}', \
					FramedIPv6Address = '%{Framed-IPv6-Address}', \
					FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
					FramedInterfaceId = '%{Framed-Interface-Id}', \
					DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}', \
					AcctStopTime = '%S', \
					AcctSessionTime = %{Acct-Session-Time}, \
					AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
					AcctTerminateCause = '%{Acct-Terminate-Cause}', \
					ConnectInfo_stop = '%{Connect-Info}' \
				WHERE UserName = '%{SQL-User-Name}' \
				AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
				AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
				AND NASPortType = '%{NAS-Port-Type}' \
				AND AcctStopTime = 0"
		}

		#
		#  No Acct-Status-Type == ignore the packet
		#
		accounting {
			query = "SELECT true"
		}
	}
}

post-auth {
	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/post-auth.sql

	query = "\
		INSERT INTO ${..postauth_table} \
			(userName, pass, reply, authdate ${..class.column_name}) \
		VALUES(\
			'%{User-Name}', \
			'%{%{User-Password}:-CHAP-PASSWORD}', \
			'%{reply:Packet-Type}', \
			'%S.%{expr:%M / 1000}' \
			${..class.reply_xlat})"
}