# -*- text -*-
######################################################################
#
#	This is a virtual server that handles DHCP.
#
#  See raddb/mods-available/dhcp_sqlippool for the IP Pool configuration.
#
#  See raddb/policy.d/dhcp_sqlippool for the "glue" code that allows
#  the RADIUS based "sqlippool" module to be used for DHCP.
#
#  See raddb/mods-config/sql/ippool/ for the schemas.
#
#  See raddb/sites-available/dhcp for instructions on how to configure
#  the DHCP server.
#
#	$Id$
#
######################################################################

#
#  The DHCP functionality goes into a virtual server.
#
server dhcp {

#  Define a DHCP socket.
#
#  The default port below is 6700, so you don't break your network.
#  If you want it to do real DHCP, change this to 67, and good luck!
#
#  You can also bind the DHCP socket to an interface.
#  See below, and raddb/radiusd.conf for examples.
#
#  This lets you run *one* DHCP server instance and have it listen on
#  multiple interfaces, each with a separate policy.
#
#  If you have multiple interfaces, it is a good idea to bind the
#  listen section to an interface.  You will also need one listen
#  section per interface.
#
#  FreeBSD does *not* support binding sockets to interfaces.  Therefore,
#  if you have multiple interfaces, broadcasts may go out of the wrong
#  one, or even all interfaces.  The solution is to use the "setfib" command.
#  If you have a network "10.10.0/24" on LAN1, you will need to do:
#
#  Pick any IP on the 10.10.0/24 network
#	$ setfib 1 route add default 10.10.0.1
#
#  Edit /etc/rc.local, and add a line:
#	setfib 1 /path/to/radiusd
#
#  The kern must be built with the following options:
#	options    ROUTETABLES=2
#  or any value larger than 2.
#
# The other only solution is to update FreeRADIUS to use BPF sockets.
#
listen {
	#  This is a dhcp socket.
	type = dhcp

	#  IP address to listen on. Will usually be the IP of the
	#  interface, or 0.0.0.0
	ipaddr = 127.0.0.1

	#  source IP address for unicast packets sent by the
	#  DHCP server.
	#
	#  The source IP for unicast packets is chosen from the first
	#  one of the following items which returns a valid IP
	#  address:
	#
	#	src_ipaddr
	#	ipaddr
	#	reply:DHCP-Server-IP-Address
	#	reply:DHCP-DHCP-Server-Identifier
	#
	src_ipaddr = 127.0.0.1

	#  The port should be 67 for a production network. Don't set
	#  it to 67 on a production network unless you really know
	#  what you're doing. Even if nothing is configured below, the
	#  server may still NAK legitimate responses from clients.
	port = 6700

	#  Interface name we are listening on. See comments above.
#	interface = lo0

	#  The DHCP server defaults to allowing broadcast packets.
	#  Set this to "no" only when the server receives *all* packets
	#  from a relay agent.  i.e. when *no* clients are on the same
	#  LAN as the DHCP server.
	#
	#  It's set to "no" here for testing. It will usually want to
	#  be "yes" in production, unless you are only dealing with
	#  relayed packets.
	broadcast = no

	#  On Linux if you're running the server as non-root, you
	#  will need to do:
	#
	#	setcap cap_net_admin,cap_net_bind_service=eip /path/to/radiusd 
	#
	#  This will allow the server to set ARP table entries
	#  for newly allocated IPs, when run as the "radius" user.
	#
	#  The above "setcap" command adds the capability to the program,
	#  usually so long as it is run by the "radius" user.  Which means
	#  (oddly enough) that it no longer works when run as root!
	#
	#  When running the server as root in debug mode, you can use:
	#
	#  capsh --caps="cap_setpcap,cap_setuid,cap_setgid,cap_net_admin,cap_net_bind_service+eip" --keep=1 --user=radius --addamb=cap_net_admin,cap_net_bind_service -- -c "/path/to/radiusd -X"
	#
	#  Or, simply "sudo" or "su" to the "radius" user, and then run
	#  the server in debug mode.

	#  De-duplicate DHCP packets.  If clients don't receive
	#  a reply within their timeout, most will re-transmit.
	#  A reply to either packet will satisfy, so de-duplicating
	#  helps manage load on a busy server
	performance {
		skip_duplicate_checks = no
	}
}

#  Packets received on the socket will be processed through one
#  of the following sections, named after the DHCP packet type.
#  See dictionary.dhcp for the packet types.

#  Return packets will be sent to, in preference order:
#     DHCP-Gateway-IP-Address
#     DHCP-Client-IP-Address
#     DHCP-Your-IP-Address
#  At least one of these attributes should be set at the end of each
#  section for a response to be sent.

#  An internal attribute of DHCP-Network-Subnet is set to provide
#  a basis for determining the network that a client belongs to.  This
#  is a hierarchical assignment based on:
#
#    - DHCP-Relay-Link-Selection
#    - DHCP-Subnet-Selection-Option
#    - DHCP-Gateway-IP-Address
#    - DHCP-Client-IP-Address
#
#  Except for cases where all IP allocation is performed using a mapping from
#  the device MAC address to a fixed IP address the DHCP configuration will
#  involve the use of one or more pools.
#
#  Each pool should be composed of a set of equally valid IP addresses for the
#  devices designated as users of the pool. During IP allocation the choice of
#  pool is driven by setting the Pool-Name attribute which may either be
#  specified directly or chosen (usually with the help of the dhcp_network
#  module) based on the initial value of DHCP-Network-Subnet.
#
#  DHCP-Network-Subnet indicates the network from which the request is
#  originating. In cases where the originating network alone is insufficent to
#  define the required IP allocated policy, DHCP-Network-Subnet may be
#  overridden to force the selection of a particular pool.
#
#  IP addresses belonging to a single pool that is designated for a Layer 2
#  network containing multiple subnets (a "shared-network" or "multinet"
#  configuration as defined by some other DHCP servers), will by definition be
#  members of distinct subnets that require their own DHCP reply parameters. In
#  this case the dhcp_subnet policy can be used to set the correct
#  DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address options
#  based on the allocated IP.

dhcp DHCP-Discover {

	#  The DHCP Server Identifier is set here since is returned in OFFERs
	update control {
		&DHCP-DHCP-Server-Identifier = 192.0.2.2
	}

	#  Call a policy (defined in policy.d/dhcp) to set common reply attributes
	dhcp_common

	#  Use a "passwd" module to set group memberships in DHCP-Group-Name
	#  Enable mods-available/dhcp_passwd to use this
	#dhcp_group_membership

	#  If clients need to be assigned to a particular network based on
	#  an attribute in the packet rather than the calculated
	#  DHCP-Network-Subnet described above, then call a policy
	#  (defined in policy.d/dhcp) to perform the override
	#dhcp_override_network

	#  Use a "files" module to lookup global and subnet options
	#  For multiple subnets use this in place of dhcp_common
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_network

	#  Do a simple mapping of MAC to assigned IP.
	#
	#  See below for the definition of the "mac2ip"
	#  module.
	#
	#mac2ip

	#  Or, allocate IPs from the DHCP pool in SQL. You may need to
	#  set the pool name here if you haven't set it elsewhere.
	#update control {
	#	&Pool-Name := "local"
	#}
	#dhcp_sqlippool

	#  If the IP address was not allocated, do something else.
	#  You could call a Perl, Python, or Java script here.
	#if (notfound) {
	# ...
	#}

	#  "Shared-networks" may have multiple IP subnets co-existing in a
	#  single Layer 2 network. If the pool for the network contains
	#  addresses from more that one subnet then the setting subnet-specific
	#  DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address
	#  parameters must be performed after the allocation of the IP address.
	#
	#  Set any subnet-specific parameters using this policy.
	#
	#  Enable mods-available/dhcp_files AND uncomment dhcp_subnet in
	#  policy.d/dhcp to use this.
	#
	#dhcp_subnet

	#  Use a "files" module to lookup options based on DHCP-Group-Name
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_group_options

	#  Use a "files" module to lookup host specific options
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_hosts

	#  As an alternative or complement to configuration files based lookup
	#  for options data you can instead use an SQL database. Example
	#  configuration is found in dhcp_policy_sql in policy.d/dhcp which
	#  will need to be adapted to your requirements.
	#dhcp_policy_sql

	#  Set the type of packet to send in reply.
	#
	#  The server will look at the DHCP-Message-Type attribute to
	#  determine which type of packet to send in reply. Common
	#  values would be DHCP-Offer, DHCP-Ack or DHCP-NAK. See
	#  dictionary.dhcp for all the possible values.
	#
	#  DHCP-Do-Not-Respond can be used to tell the server to not
	#  respond.
	#
	#  In the event that DHCP-Message-Type is not set then the
	#  server will fall back to determining the type of reply
	#  based on the rcode of this section.
	#
	#update reply {
	#       DHCP-Message-Type = DHCP-Offer
	#}
	#
	#  If DHCP-Message-Type is not set, returning "ok" or
	#  "updated" from this section will respond with a DHCP-Offer
	#  message.
	#
	#  Other rcodes will tell the server to not return any response.
	#
	#ok
}

dhcp DHCP-Request {

	#  You must set the DHCP Server Identifier here since this is returned
	#  in ACKs and is used to determine whether a request containing a
	#  "server-ip" field is intended for this server
	update control {
		&DHCP-DHCP-Server-Identifier = 192.0.2.2
	}

	#  If the request is not for this server then silently discard it
	if (&request:DHCP-DHCP-Server-Identifier && \
	    &request:DHCP-DHCP-Server-Identifier != &control:DHCP-DHCP-Server-Identifier) {
		do_not_respond
	}

	#  Response packet type. See DHCP-Discover section above.
	#update reply {
	#       &DHCP-Message-Type = DHCP-Ack
	#}

	#  Call a policy (defined in policy.d/dhcp) to set common reply attributes
	dhcp_common

	#  Use a "passwd" module to set group memberships in DHCP-Group-Name
	#  Enable mods-available/dhcp_passwd to use this
	#dhcp_group_membership

	#  Optionally override the network address based on client attributes
	#  See Discover section
	#dhcp_override_network

	#  Use a "files" module to lookup global and subnet options
	#  For multiple subnets use this in place of dhcp_common
	#  Enable mods-available/dhcp_files AND uncomment dhcp_subnet in
	#  policy.d/dhcp to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_network

	#  Do a simple mapping of MAC to assigned IP.
	#
	#  See below for the definition of the "mac2ip"
	#  module.
	#
	#mac2ip

	#  Or, allocate IPs from the DHCP pool in SQL. You may need to
	#  set the pool name here if you haven't set it elsewhere.
#	update control {
#		&Pool-Name := "local"
#	}
#	dhcp_sqlippool_request

	#  If the IP was not allocated, do something else.
	#  You could call a Perl, Python, or Java script here.
	#if (notfound) {
	# ...
	#}

	#  "Shared-networks" may have multiple IP subnets co-existing in a
	#  single Layer 2 network. If the pool for the network contains
	#  addresses from more that one subnet then the setting subnet-specific
	#  DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address
	#  parameters must be performed after the allocation of the IP address.
	#
	#  Set any subnet-specific parameters using this policy.
	#
	#dhcp_subnet

	#  Use a "files" module to lookup options based on DHCP-Group-Name
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_group_options

	#  Use a "files" module to lookup host specific options
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_hosts

	#  As an alternative or complement to configuration files based lookup
	#  for options data you can instead use an SQL database. Example
	#  configuration is found in dhcp_policy_sql in policy.d/dhcp which
	#  will need to be adapted to your requirements.
	#dhcp_policy_sql

	#  If DHCP-Message-Type is not set, returning "ok" or
	#  "updated" from this section will respond with a DHCP-Ack
	#  packet.
	#
	#  "handled" will not return a packet, all other rcodes will
	#  send back a DHCP-NAK.
	#
	#ok
}

#
#  Other DHCP packet types
#
#  There should be a separate section for each DHCP message type.
#  By default this configuration will ignore them all. Any packet type
#  not defined here will be responded to with a DHCP-NAK.

dhcp DHCP-Decline {

	#  Use a "passwd" module to set group memberships in DHCP-Group-Name
	#  Enable mods-available/dhcp_passwd to use this
	#dhcp_group_membership

	#  Optionally override the network address based on client attributes
	#  See Discover section
	#dhcp_override_network

	#  Use a "files" module to lookup global and subnet options
	#  For multiple networks use this in place of dhcp_common
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_network

	#  Use a policy that set options from data stored in an SQL database
	#dhcp_policy_sql

	#  If using IPs from a DHCP pool in SQL then you may need to set the
	#  pool name here if you haven't set it elsewhere and release the IP.
#	update control {
#		&Pool-Name := "local"
#	}
#	dhcp_sqlippool_decline

	update reply {
	       &DHCP-Message-Type = DHCP-Do-Not-Respond
	}
	reject
}

#
#  A dummy config for Inform packets - this should match the
#  options set in the Request section above, except Inform replies
#  must not set Your-IP-Address or IP-Address-Lease-Time
#
dhcp DHCP-Inform {
	#  Call a policy (defined in policy.d/dhcp) to set common reply attributes
	dhcp_common

	#  Use a "passwd" module to set group memberships in DHCP-Group-Name
	#  Enable mods-available/dhcp_passwd to use this
	#dhcp_group_membership

	#  Optionally override the network address based on client attributes
	#  See Discover section
	#dhcp_override_network

	#  Use a "files" module to lookup global and network options
	#  For multiple networks use this in place of dhcp_common
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_network

	#  Use a policy with calls a "files" module of the same name to lookup
	#  subnet options
	#  Enable mods-available/dhcp_files AND uncomment dhcp_subnet in
	#  policy.d/dhcp to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_subnet

	#  Use a "files" module to lookup options based on DHCP-Group-Name
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_group_options

	#  Use a "files" module to lookup host specific options
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_hosts

	#  Use a policy that set options from data stored in an SQL database
	#dhcp_policy_sql

	ok
}

#
#  For Windows 7 boxes
#
#dhcp DHCP-Inform {
#	update reply {
#		Packet-Dst-Port = 67
#		DHCP-Message-Type = DHCP-ACK
#		DHCP-DHCP-Server-Identifier = "%{Packet-Dst-IP-Address}"
#		DHCP-Site-specific-28 = 0x0a00
#	}
#	ok
#}

dhcp DHCP-Release {

	#  Use a "passwd" module to set group memberships in DHCP-Group-Name
	#  Enable mods-available/dhcp_passwd to use this
	#dhcp_group_membership

	#  Optionally override the network address based on client attributes
	#  See Discover section
	#dhcp_override_network

	#  Use a "files" module to lookup global and subnet options
	#  For multiple subnets use this in place of dhcp_common
	#  Enable mods-available/dhcp_files to use this
	#  Options are set in mods-config/files/dhcp
	#dhcp_network

	#  If using IPs from a DHCP pool in SQL then you may need to set the
	#  pool name here if you haven't set it elsewhere and release the IP.
#	update control {
#		&Pool-Name := "local"
#	}
#	dhcp_sqlippool_release

	update reply {
	       &DHCP-Message-Type = DHCP-Do-Not-Respond
	}
	reject
}


dhcp DHCP-Lease-Query {
	#  The thing being queried for is implicit
	#  in the packets.

	# has MAC, asking for IP, etc.
	if (&DHCP-Client-Hardware-Address) {
		# look up MAC in database
	}

	# has IP, asking for MAC, etc.
	elsif (&DHCP-Your-IP-Address) {
		# look up IP in database
	}

	# has host name, asking for IP, MAC, etc.
	elsif (&DHCP-Client-Identifier) {
		# look up identifier in database
	}
	else {
		update reply {
			&DHCP-Message-Type = DHCP-Lease-Unknown
		}

		ok

		# stop processing
		return
	}

	#
	#  We presume that the database lookup returns "notfound"
	#  if it can't find anything.
	#
	if (notfound) {
		update reply {
			&DHCP-Message-Type = DHCP-Lease-Unknown
		}
		ok
		return
	}

	#
	#	Add more logic here.  Is the lease inactive?
	#	If so, respond with DHCP-Lease-Unassigned.
	#
	#	Otherwise, respond with DHCP-Lease-Active
	#

	#
	#	Also be sure to return ALL information about
	#	the lease.
	#

	#
	#	The reply types are:
	#
	#	DHCP-Lease-Unknown
	#	DHCP-Lease-Active
	#	DHCP-Lease-Unassigned
	#
	update reply {
		&DHCP-Message-Type = DHCP-Lease-Unassigned
	}

}

}

######################################################################
#
#  This next section is a sample configuration for the "passwd"
#  module, that reads flat-text files.  It should go into
#  radiusd.conf, in the "modules" section.
#
#  The file is in the format <mac>,<ip>
#
#	00:01:02:03:04:05,192.0.2.100
#	01:01:02:03:04:05,192.0.2.101
#	02:01:02:03:04:05,192.0.2.102
#
#  This lets you perform simple static IP assignment.
#
#  There is a preconfigured "mac2ip" module setup in
#  mods-available/mac2ip. To use it do:
#
#    # cd raddb/
#    # ln -s ../mods-available/mac2ip mods-enabled/mac2ip
#    # mkdir mods-config/passwd
#
#  Then create the file mods-config/passwd/mac2ip with the above
#  format.
#
######################################################################


#  This is an example only - see mods-available/mac2ip instead; do
#  not uncomment these lines here.
#
#passwd mac2ip {
#	filename = ${confdir}/mac2ip
#	format = "*DHCP-Client-Hardware-Address:=DHCP-Your-IP-Address"
#	delimiter = ","
#}