path: root/raddb/mods-config/sql/main/mysql/queries.conf

# -*- text -*-
#
#  main/mysql/queries.conf-- MySQL configuration for default schema (schema.sql)
#
#  $Id$

# Use the driver specific SQL escape method.
#
# If you enable this configuration item, the "safe_characters"
# configuration is ignored.  FreeRADIUS then uses the MySQL escape
# functions to escape input strings.  The only downside to making this
# change is that the MySQL escaping method is not the same the one
# used by FreeRADIUS.  So characters which are NOT in the
# "safe_characters" list will now be stored differently in the database.
#
#auto_escape = yes

# Safe characters list for sql queries. Everything else is replaced
# with their mime-encoded equivalents.
# The default list should be ok
# Using 'auto_escape' is preferred
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"

#######################################################################
#  Connection config
#######################################################################
# The character set is not configurable. The default character set of
# the mysql client library is used. To control the character set,
# create/edit my.cnf (typically in /etc/mysql/my.cnf or /etc/my.cnf)
# and enter
# [client]
# default-character-set = utf8
#

#######################################################################
#  Query config:  Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
# everywhere a username substitution is needed so you you can be sure
# the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
#	Use Stripped-User-Name, if it's there.
#	Else use User-Name, if it's there,
#	Else use hard-coded string "DEFAULT" as the user name.
#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
#
sql_user_name = "%{User-Name}"

#######################################################################
#  Query config:  Event-Timestamp
#######################################################################
# event_timestamp_epoch is the basis for the time inserted into
# accounting records. Typically this will be the Event-Timestamp of the
# accounting request, which is usually provided by a NAS.
#
# Uncomment the next line, if you want the timestamp to be based on the
# request reception time recorded by this server, for example if you
# distrust the provided Event-Timestamp.
#event_timestamp_epoch = "%l"

event_timestamp_epoch = "%{%{integer:Event-Timestamp}:-%l}"

# event_timestamp is the SQL snippet for converting an epoch timestamp
# to an SQL date.

event_timestamp = "FROM_UNIXTIME(${event_timestamp_epoch})"

#######################################################################
#  Query config:  Class attribute
#######################################################################
#
#  3.0.22 and later have a "class" column in the accounting table.
#
#  However, we do NOT want to break existing configurations by adding
#  the Class attribute to the default queries.  If we did that, then
#  systems using newer versions of the server would fail, because
#  there is no "class" column in their accounting tables.
#
#  The solution to that is the following "class" subsection.  If your
#  database has a "class" column for the various tables, then you can
#  uncomment the configuration items here.  The queries below will
#  then automatically insert the Class attribute into radacct,
#  radpostauth, etc.
#
class {
	#
	#  Delete the '#' character from each of the configuration
	#  items in this section.  This change puts the Class
	#  attribute into the various tables.  Leave the double-quoted
	#  string there, as the value for the configuration item.
	#
	#  See also policy.d/accounting, and the "insert_acct_class"
	#  policy.  You will need to list (or uncomment)
	#  "insert_acct_class" in the "post-auth" section in order to
	#  create a Class attribute.
	#
	column_name =	# ", class"
	packet_xlat =	# ", '%{Class}'"
	reply_xlat =	# ", '%{reply:Class}'"
}

#######################################################################
# Default profile
#######################################################################
# This is the default profile. It is found in SQL by group membership.
# That means that this profile must be a member of at least one group
# which will contain the corresponding check and reply items.
# This profile will be queried in the authorize section for every user.
# The point is to assign all users a default profile without having to
# manually add each one to a group that will contain the profile.
# The SQL module will also honor the User-Profile attribute. This
# attribute can be set anywhere in the authorize section (ie the users
# file). It is found exactly as the default profile is found.
# If it is set then it will *overwrite* the default profile setting.
# The idea is to select profiles based on checks on the incoming packets,
# not on user group membership. For example:
# -- users file --
# DEFAULT	Service-Type == Outbound-User, User-Profile := "outbound"
# DEFAULT	Service-Type == Framed-User, User-Profile := "framed"
#
# By default the default_user_profile is not set
#
#default_user_profile = "DEFAULT"

#######################################################################
# NAS Query
#######################################################################
# This query retrieves the radius clients
#
# 0. Row ID (currently unused)
# 1. Name (or IP address)
# 2. Shortname
# 3. Type
# 4. Secret
# 5. Server
#######################################################################

client_query = "\
	SELECT id, nasname, shortname, type, secret, server \
	FROM ${client_table}"

#######################################################################
# Authorization Queries
#######################################################################
# These queries compare the check items for the user
# in ${authcheck_table} and setup the reply items in
# ${authreply_table}. You can use any query/tables
# you want, but the return data for each row MUST
# be in the following order:
#
# 0. Row ID (currently unused)
# 1. UserName/GroupName
# 2. Item Attr Name
# 3. Item Attr Value
# 4. Item Attr Operation
#######################################################################
# Use these for case sensitive usernames.

#authorize_check_query = "\
#	SELECT id, username, attribute, value, op \
#	FROM ${authcheck_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY id"

#authorize_reply_query = "\
#	SELECT id, username, attribute, value, op \
#	FROM ${authreply_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY id"

#
#  The default queries are case insensitive. (for compatibility with
#  older versions of FreeRADIUS)
#
authorize_check_query = "\
	SELECT id, username, attribute, value, op \
	FROM ${authcheck_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_reply_query = "\
	SELECT id, username, attribute, value, op \
	FROM ${authreply_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY id"

#
#  Use these for case sensitive usernames.
#
#group_membership_query = "\
#	SELECT groupname \
#	FROM ${usergroup_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY priority"

group_membership_query = "\
	SELECT groupname \
	FROM ${usergroup_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY priority"

authorize_group_check_query = "\
	SELECT id, groupname, attribute, \
	Value, op \
	FROM ${groupcheck_table} \
	WHERE groupname = '%{${group_attribute}}' \
	ORDER BY id"

authorize_group_reply_query = "\
	SELECT id, groupname, attribute, \
	value, op \
	FROM ${groupreply_table} \
	WHERE groupname = '%{${group_attribute}}' \
	ORDER BY id"

#######################################################################
# Simultaneous Use Checking Queries
#######################################################################
# simul_count_query	- query for the number of current connections
#			- If this is not defined, no simultaneous use checking
#			- will be performed by this module instance
# simul_verify_query	- query to return details of current connections
#				for verification
#			- Leave blank or commented out to disable verification step
#			- Note that the returned field order should not be changed.
#
# Note: Sessions that started prior to the most recent reload of their NAS will
# be correctly considered inactive, even if the radacct entry itself is not
# marked as stopped.
#
#######################################################################

simul_count_query = "\
	SELECT COUNT(*) \
	FROM ${acct_table1} a \
	LEFT OUTER JOIN nasreload n USING (nasipaddress) \
	WHERE username = '%{SQL-User-Name}' \
	AND acctstoptime IS NULL \
	AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"

simul_verify_query = "\
	SELECT \
		radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, \
		callingstationid, framedprotocol \
	FROM ${acct_table1} a \
	LEFT OUTER JOIN nasreload n USING (nasipaddress) \
	WHERE username = '%{SQL-User-Name}' \
	AND acctstoptime IS NULL \
	AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"

#######################################################################
# Accounting and Post-Auth Queries
#######################################################################
# These queries insert/update accounting and authentication records.
# The query to use is determined by the value of 'reference'.
# This value is used as a configuration path and should resolve to one
# or more 'query's. If reference points to multiple queries, and a query
# fails, the next query is executed.
#
# Behaviour is identical to the old 1.x/2.x module, except we can now
# fail between N queries, and query selection can be based on any
# combination of attributes, or custom 'Acct-Status-Type' values.
#######################################################################
accounting {
	reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"

	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/accounting.sql

	column_list = "\
		acctsessionid,		acctuniqueid,		username, \
		realm,			nasipaddress,		nasportid, \
		nasporttype,		acctstarttime,		acctupdatetime, \
		acctstoptime,		acctsessiontime, 	acctauthentic, \
		connectinfo_start,	connectinfo_stop, 	acctinputoctets, \
		acctoutputoctets,	calledstationid, 	callingstationid, \
		acctterminatecause,	servicetype,		framedprotocol, \
		framedipaddress,	framedipv6address,	framedipv6prefix, \
		framedinterfaceid,	delegatedipv6prefix	${..class.column_name}"

	type {
		accounting-on {

			#
			#  "Bulk update" Accounting-On/Off strategy.
			#
			#  Immediately terminate all sessions associated with a
			#  given NAS.
			#
			#  Note: If a large number of sessions require closing
			#  then the bulk update may be take a long time to run
			#  and lock an excessive number of rows. See the
			#  strategy below for an alternative approach that does
			#  not touch the radacct session data.
			#
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					acctstoptime = ${....event_timestamp}, \
					acctsessiontime	= '${....event_timestamp_epoch}' \
						- UNIX_TIMESTAMP(acctstarttime), \
					acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' \
				WHERE acctstoptime IS NULL \
				AND nasipaddress   = '%{NAS-IP-Address}' \
				AND acctstarttime <= ${....event_timestamp}"

			#
			#  "Lightweight" Accounting-On/Off strategy.
			#
			#  Record the reload time of the NAS and let the
			#  administrator actually close the sessions in radacct
			#  out-of-band, if desired.
			#
			#  Implementation advice, together with a stored
			#  procedure for closing sessions and a view showing
			#  the effective stop time of each session is provided
			#  in process-radacct.sql.
			#
			#  To enable this strategy, just change the previous
			#  query to "-query", and this one to "query".  The
			#  previous one will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				INSERT INTO nasreload \
				SET \
					nasipaddress = '%{NAS-IP-Address}', \
					reloadtime = ${....event_timestamp} \
				ON DUPLICATE KEY UPDATE reloadtime = ${....event_timestamp}"

		}

		accounting-off {
			query = "${..accounting-on.query}"
		}

		#
		#  Implement the "sql_session_start" policy.
		#  See raddb/policy.d/accounting for more details.
		#
		#  You also need to fix the other queries as
		#  documented below.  Look for "sql_session_start".
		#
		post-auth {
			query = "\
			INSERT INTO ${....acct_table1} \
				(${...column_list}) \
			VALUES(\
				'%{Acct-Session-Id}', \
				'%{Acct-Unique-Session-Id}', \
				'%{SQL-User-Name}', \
				'%{Realm}', \
				'%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', \
				NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), \
				'%{NAS-Port-Type}', \
				${....event_timestamp}, \
				${....event_timestamp}, \
				NULL, \
				0, \
				'', \
				'%{Connect-Info}', \
				NULL, \
				0, \
				0, \
				'%{Called-Station-Id}', \
				'%{Calling-Station-Id}', \
				'', \
				'%{Service-Type}', \
				NULL, \
				'', \
				'', \
				'', \
				'', \
				'' \
				${....class.packet_xlat})"

			query = "\
				UPDATE ${....acct_table1} SET \
					AcctStartTime = ${....event_timestamp}, \
					AcctUpdateTime = ${....event_timestamp}, \
					ConnectInfo_start = '%{Connect-Info}', \
					AcctSessionId = '%{Acct-Session-Id}' \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime IS NULL"
		}

		start {
			#
			#  Insert a new record into the sessions table
			#
			query = "\
				INSERT INTO ${....acct_table1} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					${....event_timestamp}, \
					${....event_timestamp}, \
					NULL, \
					'0', \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					'0', \
					'0', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					framedipaddress = '%{Framed-IP-Address}', \
					framedipv6address = '%{Framed-IPv6-Address}', \
					framedipv6prefix = '%{Framed-IPv6-Prefix}', \
					framedinterfaceid = '%{Framed-Interface-Id}', \
					delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', \
					AcctStartTime = ${....event_timestamp}, \
					AcctUpdateTime = ${....event_timestamp} \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime IS NULL"

			#
			#  Key constraints prevented us from inserting a new session,
			#  use the alternate query to update an existing session.
			#
			query = "\
				UPDATE ${....acct_table1} SET \
					acctstarttime	= ${....event_timestamp}, \
					acctupdatetime	= ${....event_timestamp}, \
					connectinfo_start = '%{Connect-Info}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"

		}

		interim-update {
			#
			#  Update an existing session and calculate the interval
			#  between the last data we received for the session and this
			#  update. This can be used to find stale sessions.
			#
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), \
					acctupdatetime  = ${....event_timestamp}, \
					acctinterval    = ${....event_timestamp_epoch} - \
						UNIX_TIMESTAMP(@acctupdatetime_old), \
					framedipaddress = '%{Framed-IP-Address}', \
					framedipv6address = '%{Framed-IPv6-Address}', \
					framedipv6prefix = '%{Framed-IPv6-Prefix}', \
					framedinterfaceid = '%{Framed-Interface-Id}', \
					delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', \
					acctsessiontime = %{%{Acct-Session-Time}:-NULL}, \
					acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Input-Octets}:-0}', \
					acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Output-Octets}:-0}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"

			#
			#  The update condition matched no existing sessions. Use
			#  the values provided in the update to create a new session.
			#
			query = "\
				INSERT INTO ${....acct_table1} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					FROM_UNIXTIME(${....event_timestamp_epoch} - %{%{Acct-Session-Time}:-0}), \
					${....event_timestamp}, \
					NULL, \
					%{%{Acct-Session-Time}:-NULL}, \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \
					'%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					framedipaddress = '%{Framed-IP-Address}', \
					framedipv6address = '%{Framed-IPv6-Address}', \
					framedipv6prefix = '%{Framed-IPv6-Prefix}', \
					framedinterfaceid = '%{Framed-Interface-Id}', \
					delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', \
					AcctUpdateTime = ${....event_timestamp}, \
					AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, \
					AcctInputOctets = '%{%{Acct-Input-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = '%{%{Acct-Output-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Output-Octets}:-0}' \
				WHERE UserName = '%{SQL-User-Name}' \
					AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
					AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
					AND NASPortType = '%{NAS-Port-Type}' \
					AND AcctStopTime IS NULL"

		}

		stop {
			#
			#  Session has terminated, update the stop time and statistics.
			#
			query = "\
				UPDATE ${....acct_table2} SET \
					acctstoptime	= ${....event_timestamp}, \
					acctsessiontime	= %{%{Acct-Session-Time}:-NULL}, \
					acctinputoctets	= '%{%{Acct-Input-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Input-Octets}:-0}', \
					acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Output-Octets}:-0}', \
					acctterminatecause = '%{Acct-Terminate-Cause}', \
					connectinfo_stop = '%{Connect-Info}' \
				WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"

			#
			#  The update condition matched no existing sessions. Use
			#  the values provided in the update to create a new session.
			#
			query = "\
				INSERT INTO ${....acct_table2} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{%{NAS-Port-ID}:-%{NAS-Port}}', \
					'%{NAS-Port-Type}', \
					FROM_UNIXTIME(${....event_timestamp_epoch} - %{%{Acct-Session-Time}:-0}), \
					${....event_timestamp}, \
					${....event_timestamp}, \
					%{%{Acct-Session-Time}:-NULL}, \
					'%{Acct-Authentic}', \
					'', \
					'%{Connect-Info}', \
					'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \
					'%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Acct-Terminate-Cause}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Framed-IPv6-Address}', \
					'%{Framed-IPv6-Prefix}', \
					'%{Framed-Interface-Id}', \
					'%{Delegated-IPv6-Prefix}' \
					${....class.packet_xlat})"

			#
			#  When using "sql_session_start", you should comment out
			#  the previous query, and enable this one.
			#
			#  Just change the previous query to "-query",
			#  and this one to "query".  The previous one
			#  will be ignored, and this one will be
			#  enabled.
			#
			-query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctSessionId = '%{Acct-Session-Id}', \
					AcctUniqueId = '%{Acct-Unique-Session-Id}', \
					AcctAuthentic = '%{Acct-Authentic}', \
					ConnectInfo_start = '%{Connect-Info}', \
					ServiceType = '%{Service-Type}', \
					FramedProtocol = '%{Framed-Protocol}', \
					framedipaddress = '%{Framed-IP-Address}', \
					framedipv6address = '%{Framed-IPv6-Address}', \
					framedipv6prefix = '%{Framed-IPv6-Prefix}', \
					framedinterfaceid = '%{Framed-Interface-Id}', \
					delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', \
					AcctStopTime = ${....event_timestamp}, \
					AcctUpdateTime = ${....event_timestamp}, \
					AcctSessionTime = %{Acct-Session-Time}, \
					AcctInputOctets = '%{%{Acct-Input-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Input-Octets}:-0}', \
					AcctOutputOctets = '%{%{Acct-Output-Gigawords}:-0}' \
						<< 32 | '%{%{Acct-Output-Octets}:-0}', \
					AcctTerminateCause = '%{Acct-Terminate-Cause}', \
					ConnectInfo_stop = '%{Connect-Info}' \
				WHERE UserName = '%{SQL-User-Name}' \
				AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
				AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
				AND NASPortType = '%{NAS-Port-Type}' \
				AND AcctStopTime IS NULL"

		}

		#
		#  No Acct-Status-Type == ignore the packet
		#
		accounting {
			query = "SELECT true"
		}
	}
}


#######################################################################
# Authentication Logging Queries
#######################################################################
# postauth_query	- Insert some info after authentication
#######################################################################

post-auth {
	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/post-auth.sql

	query =	"\
		INSERT INTO ${..postauth_table} \
			(username, pass, reply, authdate ${..class.column_name}) \
		VALUES ( \
			'%{SQL-User-Name}', \
			'%{%{User-Password}:-%{Chap-Password}}', \
			'%{reply:Packet-Type}', \
			'%S.%M' \
			${..class.reply_xlat})"
}