diff options
Diffstat (limited to 'uwac/protocols/viewporter.xml')
| -rw-r--r-- | uwac/protocols/viewporter.xml | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/uwac/protocols/viewporter.xml b/uwac/protocols/viewporter.xml new file mode 100644 index 0000000..d1048d1 --- /dev/null +++ b/uwac/protocols/viewporter.xml @@ -0,0 +1,180 @@ +<?xml version="1.0" encoding="UTF-8"?> +<protocol name="viewporter"> + + <copyright> + Copyright © 2013-2016 Collabora, Ltd. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + </copyright> + + <interface name="wp_viewporter" version="1"> + <description summary="surface cropping and scaling"> + The global interface exposing surface cropping and scaling + capabilities is used to instantiate an interface extension for a + wl_surface object. This extended interface will then allow + cropping and scaling the surface contents, effectively + disconnecting the direct relationship between the buffer and the + surface size. + </description> + + <request name="destroy" type="destructor"> + <description summary="unbind from the cropping and scaling interface"> + Informs the server that the client will not be using this + protocol object anymore. This does not affect any other objects, + wp_viewport objects included. + </description> + </request> + + <enum name="error"> + <entry name="viewport_exists" value="0" + summary="the surface already has a viewport object associated"/> + </enum> + + <request name="get_viewport"> + <description summary="extend surface interface for crop and scale"> + Instantiate an interface extension for the given wl_surface to + crop and scale its content. If the given wl_surface already has + a wp_viewport object associated, the viewport_exists + protocol error is raised. + </description> + <arg name="id" type="new_id" interface="wp_viewport" + summary="the new viewport interface id"/> + <arg name="surface" type="object" interface="wl_surface" + summary="the surface"/> + </request> + </interface> + + <interface name="wp_viewport" version="1"> + <description summary="crop and scale interface to a wl_surface"> + An additional interface to a wl_surface object, which allows the + client to specify the cropping and scaling of the surface + contents. + + This interface works with two concepts: the source rectangle (src_x, + src_y, src_width, src_height), and the destination size (dst_width, + dst_height). The contents of the source rectangle are scaled to the + destination size, and content outside the source rectangle is ignored. + This state is double-buffered, and is applied on the next + wl_surface.commit. + + The two parts of crop and scale state are independent: the source + rectangle, and the destination size. Initially both are unset, that + is, no scaling is applied. The whole of the current wl_buffer is + used as the source, and the surface size is as defined in + wl_surface.attach. + + If the destination size is set, it causes the surface size to become + dst_width, dst_height. The source (rectangle) is scaled to exactly + this size. This overrides whatever the attached wl_buffer size is, + unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface + has no content and therefore no size. Otherwise, the size is always + at least 1x1 in surface local coordinates. + + If the source rectangle is set, it defines what area of the wl_buffer is + taken as the source. If the source rectangle is set and the destination + size is not set, then src_width and src_height must be integers, and the + surface size becomes the source rectangle size. This results in cropping + without scaling. If src_width or src_height are not integers and + destination size is not set, the bad_size protocol error is raised when + the surface state is applied. + + The coordinate transformations from buffer pixel coordinates up to + the surface-local coordinates happen in the following order: + 1. buffer_transform (wl_surface.set_buffer_transform) + 2. buffer_scale (wl_surface.set_buffer_scale) + 3. crop and scale (wp_viewport.set*) + This means, that the source rectangle coordinates of crop and scale + are given in the coordinates after the buffer transform and scale, + i.e. in the coordinates that would be the surface-local coordinates + if the crop and scale was not applied. + + If src_x or src_y are negative, the bad_value protocol error is raised. + Otherwise, if the source rectangle is partially or completely outside of + the non-NULL wl_buffer, then the out_of_buffer protocol error is raised + when the surface state is applied. A NULL wl_buffer does not raise the + out_of_buffer error. + + If the wl_surface associated with the wp_viewport is destroyed, + all wp_viewport requests except 'destroy' raise the protocol error + no_surface. + + If the wp_viewport object is destroyed, the crop and scale + state is removed from the wl_surface. The change will be applied + on the next wl_surface.commit. + </description> + + <request name="destroy" type="destructor"> + <description summary="remove scaling and cropping from the surface"> + The associated wl_surface's crop and scale state is removed. + The change is applied on the next wl_surface.commit. + </description> + </request> + + <enum name="error"> + <entry name="bad_value" value="0" + summary="negative or zero values in width or height"/> + <entry name="bad_size" value="1" + summary="destination size is not integer"/> + <entry name="out_of_buffer" value="2" + summary="source rectangle extends outside of the content area"/> + <entry name="no_surface" value="3" + summary="the wl_surface was destroyed"/> + </enum> + + <request name="set_source"> + <description summary="set the source rectangle for cropping"> + Set the source rectangle of the associated wl_surface. See + wp_viewport for the description, and relation to the wl_buffer + size. + + If all of x, y, width and height are -1.0, the source rectangle is + unset instead. Any other set of values where width or height are zero + or negative, or x or y are negative, raise the bad_value protocol + error. + + The crop and scale state is double-buffered state, and will be + applied on the next wl_surface.commit. + </description> + <arg name="x" type="fixed" summary="source rectangle x"/> + <arg name="y" type="fixed" summary="source rectangle y"/> + <arg name="width" type="fixed" summary="source rectangle width"/> + <arg name="height" type="fixed" summary="source rectangle height"/> + </request> + + <request name="set_destination"> + <description summary="set the surface size for scaling"> + Set the destination size of the associated wl_surface. See + wp_viewport for the description, and relation to the wl_buffer + size. + + If width is -1 and height is -1, the destination size is unset + instead. Any other pair of values for width and height that + contains zero or negative values raises the bad_value protocol + error. + + The crop and scale state is double-buffered state, and will be + applied on the next wl_surface.commit. + </description> + <arg name="width" type="int" summary="surface width"/> + <arg name="height" type="int" summary="surface height"/> + </request> + </interface> + +</protocol> |