From e2bbf175a2184bd76f6c54ccf8456babeb1a46fc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Tue, 9 Apr 2024 15:16:35 +0200 Subject: Adding upstream version 9.1. Signed-off-by: Daniel Baumann --- doc/manpages/frr-bgpd.rst | 82 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 doc/manpages/frr-bgpd.rst (limited to 'doc/manpages/frr-bgpd.rst') diff --git a/doc/manpages/frr-bgpd.rst b/doc/manpages/frr-bgpd.rst new file mode 100644 index 0000000..f7e2026 --- /dev/null +++ b/doc/manpages/frr-bgpd.rst @@ -0,0 +1,82 @@ +**** +BGPD +**** + +.. include:: defines.rst +.. |DAEMON| replace:: bgpd + +SYNOPSIS +======== +|DAEMON| |synopsis-options-hv| + +|DAEMON| |synopsis-options| + +DESCRIPTION +=========== +|DAEMON| is a routing component that works with the FRRouting routing engine. + +OPTIONS +======= +OPTIONS available for the |DAEMON| command: + +.. include:: common-options.rst + +.. option:: -p, --bgp_port + + Set the bgp protocol's port number. When port number is 0, that means do not + listen bgp port. + +.. option:: -l, --listenon + + Specify a specific IP address for bgpd to listen on, rather than its default + of ``0.0.0.0`` / ``::``. This can be useful to constrain bgpd to an internal + address, or to run multiple bgpd processes on one host. + +.. option:: -n, --no_kernel + + Do not install learned routes into the linux kernel. This option is useful + for a route-reflector environment or if you are running multiple bgp + processes in the same namespace. This option is different than the --no_zebra + option in that a ZAPI connection is made. + +.. option:: -e, --ecmp + + Run BGP with a limited ecmp capability, that is different than what BGP + was compiled with. The value specified must be greater than 0 and less + than or equal to the MULTIPATH_NUM specified on compilation. + +.. option:: -Z, --no_zebra + + Do not communicate with zebra at all. This is different than the --no_kernel + option in that we do not even open a ZAPI connection to the zebra process. + +.. option:: -s, --socket_size + + When opening tcp connections to our peers, set the socket send buffer + size that the kernel will use for the peers socket. This option + is only really useful at a very large scale. Experimentation should + be done to see if this is helping or not at the scale you are running + at. + +LABEL MANAGER +------------- + +.. option:: -I, --int_num + + Set zclient id. This is required when using Zebra label manager in proxy mode. + +FILES +===== + +|INSTALL_PREFIX_SBIN|/|DAEMON| + The default location of the |DAEMON| binary. + +|INSTALL_PREFIX_ETC|/|DAEMON|.conf + The default location of the |DAEMON| config file. + +$(PWD)/|DAEMON|.log + If the |DAEMON| process is configured to output logs to a file, then you + will find this file in the directory where you started |DAEMON|. + +.. include:: epilogue.rst + -- cgit v1.2.3