OpenWrt ======= General info about OpenWrt buildsystem: `link `_. Prepare build environment ------------------------- For Debian based distributions, run: :: sudo apt-get install git build-essential libssl-dev libncurses5-dev \ unzip zlib1g-dev subversion mercurial For other environments, instructions can be found in the `official documentation `_. Get OpenWrt Sources (from Git) ------------------------------ .. note:: The OpenWrt build will fail if you run it as root. So take care to run it as a nonprivileged user. Clone the OpenWrt sources and retrieve the package feeds :: git clone https://github.com/openwrt/openwrt.git cd openwrt ./scripts/feeds update -a ./scripts/feeds install -a Configure OpenWrt for your target and select the needed FRR packages in Network -> Routing and Redirection -> frr, exit and save :: make menuconfig Then, to compile either a complete OpenWrt image, or the FRR packages, run: :: make or make package/frr/compile It may be possible that on first build ``make package/frr/compile`` not to work and it may be needed to run a ``make`` for the entire build environment. Add ``V=s`` to get more debugging output. More information about OpenWrt buildsystem can be found `here `__. Work with sources ----------------- To update to a newer version, or change other options, you need to edit the ``feeds/packages/frr/Makefile``. More information about working with patches in OpenWrt buildsystem can be found `here `__. Usage ----- Edit ``/usr/sbin/frr.init`` and add/remove the daemons name in section ``DAEMONS=`` or don't install unneeded packages For example: zebra bgpd ldpd isisd nhrpd ospfd ospf6d pimd ripd ripngd Enable the service ^^^^^^^^^^^^^^^^^^ - ``service frr enable`` Start the service ^^^^^^^^^^^^^^^^^ - ``service frr start``