// SPDX-License-Identifier: GPL-2.0-or-later /* * Link State Database definition - ted.h * * Author: Olivier Dugeon * * Copyright (C) 2020 Orange http://www.orange.com * * This file is part of Free Range Routing (FRR). */ #ifndef _FRR_LINK_STATE_H_ #define _FRR_LINK_STATE_H_ #include "admin_group.h" #include "typesafe.h" #ifdef __cplusplus extern "C" { #endif /** * This file defines the model used to implement a Link State Database * suitable to be used by various protocol like RSVP-TE, BGP-LS, PCEP ... * This database is normally fulfill by the link state routing protocol, * commonly OSPF or ISIS, carrying Traffic Engineering information within * Link State Attributes. See, RFC3630.(OSPF-TE) and RFC5305 (ISIS-TE). * * At least, 3 types of Link State structure are defined: * - Link State Node that groups all information related to a node * - Link State Attributes that groups all information related to a link * - Link State Prefix that groups all information related to a prefix * * These 3 types of structures are those handled by BGP-LS (see RFC7752). * * Each structure, in addition to the specific parameters, embed the node * identifier which advertises the Link State and a bit mask as flags to * indicates which parameters are valid i.e. for which the value corresponds * to a Link State information convey by the routing protocol. * Node identifier is composed of the route id as IPv4 address plus the area * id for OSPF and the ISO System id plus the IS-IS level for IS-IS. */ /* external reference */ struct zapi_opaque_reg_info; struct zclient; /* Link State Common definitions */ #define MAX_NAME_LENGTH 256 #define ISO_SYS_ID_LEN 6 /* Type of Node */ enum ls_node_type { NONE = 0, /* Unknown */ STANDARD, /* a P or PE node */ ABR, /* an Array Border Node */ ASBR, /* an Autonomous System Border Node */ RMT_ASBR, /* Remote ASBR */ PSEUDO /* a Pseudo Node */ }; /* Origin of the Link State information */ enum ls_origin { UNKNOWN = 0, ISIS_L1, ISIS_L2, OSPFv2, DIRECT, STATIC }; /** * Link State Node Identifier as: * - IPv4 address + Area ID for OSPF * - ISO System ID + ISIS Level for ISIS */ struct ls_node_id { enum ls_origin origin; /* Origin of the LS information */ union { struct { struct in_addr addr; /* OSPF Router IS */ struct in_addr area_id; /* OSPF Area ID */ } ip; struct { uint8_t sys_id[ISO_SYS_ID_LEN]; /* ISIS System ID */ uint8_t level; /* ISIS Level */ uint8_t padding; } iso; } id; }; /** * Check if two Link State Node IDs are equal. Note that this routine has the * same return value sense as '==' (which is different from a comparison). * * @param i1 First Link State Node Identifier * @param i2 Second Link State Node Identifier * @return 1 if equal, 0 otherwise */ extern int ls_node_id_same(struct ls_node_id i1, struct ls_node_id i2); /* Supported number of algorithm by the link-state library */ #define LIB_LS_SR_ALGO_COUNT 2 /* Link State flags to indicate which Node parameters are valid */ #define LS_NODE_UNSET 0x0000 #define LS_NODE_NAME 0x0001 #define LS_NODE_ROUTER_ID 0x0002 #define LS_NODE_ROUTER_ID6 0x0004 #define LS_NODE_FLAG 0x0008 #define LS_NODE_TYPE 0x0010 #define LS_NODE_AS_NUMBER 0x0020 #define LS_NODE_SR 0x0040 #define LS_NODE_SRLB 0x0080 #define LS_NODE_MSD 0x0100 /* Link State Node structure */ struct ls_node { uint16_t flags; /* Flag for parameters validity */ struct ls_node_id adv; /* Adv. Router of this Link State */ char name[MAX_NAME_LENGTH]; /* Name of the Node (IS-IS only) */ struct in_addr router_id; /* IPv4 Router ID */ struct in6_addr router_id6; /* IPv6 Router ID */ uint8_t node_flag; /* IS-IS or OSPF Node flag */ enum ls_node_type type; /* Type of Node */ uint32_t as_number; /* Local or neighbor AS number */ struct ls_srgb { /* Segment Routing Global Block */ uint32_t lower_bound; /* MPLS label lower bound */ uint32_t range_size; /* MPLS label range size */ uint8_t flag; /* IS-IS SRGB flags */ } srgb; struct ls_srlb { /* Segment Routing Local Block */ uint32_t lower_bound; /* MPLS label lower bound */ uint32_t range_size; /* MPLS label range size */ } srlb; uint8_t algo[LIB_LS_SR_ALGO_COUNT]; /* Segment Routing Algorithms */ uint8_t msd; /* Maximum Stack Depth */ }; /* Link State flags to indicate which Attribute parameters are valid */ #define LS_ATTR_UNSET 0x00000000 #define LS_ATTR_NAME 0x00000001 #define LS_ATTR_METRIC 0x00000002 #define LS_ATTR_TE_METRIC 0x00000004 #define LS_ATTR_ADM_GRP 0x00000008 #define LS_ATTR_LOCAL_ADDR 0x00000010 #define LS_ATTR_NEIGH_ADDR 0x00000020 #define LS_ATTR_LOCAL_ADDR6 0x00000040 #define LS_ATTR_NEIGH_ADDR6 0x00000080 #define LS_ATTR_LOCAL_ID 0x00000100 #define LS_ATTR_NEIGH_ID 0x00000200 #define LS_ATTR_MAX_BW 0x00000400 #define LS_ATTR_MAX_RSV_BW 0x00000800 #define LS_ATTR_UNRSV_BW 0x00001000 #define LS_ATTR_REMOTE_AS 0x00002000 #define LS_ATTR_REMOTE_ADDR 0x00004000 #define LS_ATTR_REMOTE_ADDR6 0x00008000 #define LS_ATTR_DELAY 0x00010000 #define LS_ATTR_MIN_MAX_DELAY 0x00020000 #define LS_ATTR_JITTER 0x00040000 #define LS_ATTR_PACKET_LOSS 0x00080000 #define LS_ATTR_AVA_BW 0x00100000 #define LS_ATTR_RSV_BW 0x00200000 #define LS_ATTR_USE_BW 0x00400000 #define LS_ATTR_ADJ_SID 0x01000000 #define LS_ATTR_BCK_ADJ_SID 0x02000000 #define LS_ATTR_ADJ_SID6 0x04000000 #define LS_ATTR_BCK_ADJ_SID6 0x08000000 #define LS_ATTR_SRLG 0x10000000 #define LS_ATTR_EXT_ADM_GRP 0x20000000 /* Link State Attributes */ struct ls_attributes { uint32_t flags; /* Flag for parameters validity */ struct ls_node_id adv; /* Adv. Router of this Link State */ char name[MAX_NAME_LENGTH]; /* Name of the Edge. Could be null */ uint32_t metric; /* IGP standard metric */ struct ls_standard { /* Standard TE metrics */ uint32_t te_metric; /* Traffic Engineering metric */ uint32_t admin_group; /* Administrative Group */ struct in_addr local; /* Local IPv4 address */ struct in_addr remote; /* Remote IPv4 address */ struct in6_addr local6; /* Local IPv6 address */ struct in6_addr remote6; /* Remote IPv6 address */ uint32_t local_id; /* Local Identifier */ uint32_t remote_id; /* Remote Identifier */ float max_bw; /* Maximum Link Bandwidth */ float max_rsv_bw; /* Maximum Reservable BW */ float unrsv_bw[8]; /* Unreserved BW per CT (8) */ uint32_t remote_as; /* Remote AS number */ struct in_addr remote_addr; /* Remote IPv4 address */ struct in6_addr remote_addr6; /* Remote IPv6 address */ } standard; struct ls_extended { /* Extended TE Metrics */ uint32_t delay; /* Unidirectional average delay */ uint32_t min_delay; /* Unidirectional minimum delay */ uint32_t max_delay; /* Unidirectional maximum delay */ uint32_t jitter; /* Unidirectional delay variation */ uint32_t pkt_loss; /* Unidirectional packet loss */ float ava_bw; /* Available Bandwidth */ float rsv_bw; /* Reserved Bandwidth */ float used_bw; /* Utilized Bandwidth */ } extended; struct admin_group ext_admin_group; /* Extended Admin. Group */ #define ADJ_PRI_IPV4 0 #define ADJ_BCK_IPV4 1 #define ADJ_PRI_IPV6 2 #define ADJ_BCK_IPV6 3 #define LS_ADJ_MAX 4 struct ls_adjacency { /* (LAN)-Adjacency SID for OSPF */ uint32_t sid; /* SID as MPLS label or index */ uint8_t flags; /* Flags */ uint8_t weight; /* Administrative weight */ union { struct in_addr addr; /* Neighbor @IP for OSPF */ uint8_t sysid[ISO_SYS_ID_LEN]; /* or Sys-ID for ISIS */ } neighbor; } adj_sid[4]; /* IPv4/IPv6 & Primary/Backup (LAN)-Adj. SID */ uint32_t *srlgs; /* List of Shared Risk Link Group */ uint8_t srlg_len; /* number of SRLG in the list */ }; /* Link State flags to indicate which Prefix parameters are valid */ #define LS_PREF_UNSET 0x00 #define LS_PREF_IGP_FLAG 0x01 #define LS_PREF_ROUTE_TAG 0x02 #define LS_PREF_EXTENDED_TAG 0x04 #define LS_PREF_METRIC 0x08 #define LS_PREF_SR 0x10 /* Link State Prefix */ struct ls_prefix { uint8_t flags; /* Flag for parameters validity */ struct ls_node_id adv; /* Adv. Router of this Link State */ struct prefix pref; /* IPv4 or IPv6 prefix */ uint8_t igp_flag; /* IGP Flags associated to the prefix */ uint32_t route_tag; /* IGP Route Tag */ uint64_t extended_tag; /* IGP Extended Route Tag */ uint32_t metric; /* Route metric for this prefix */ struct ls_sid { uint32_t sid; /* Segment Routing ID */ uint8_t sid_flag; /* Segment Routing Flags */ uint8_t algo; /* Algorithm for Segment Routing */ } sr; }; /** * Create a new Link State Node. Structure is dynamically allocated. * * @param adv Mandatory Link State Node ID i.e. advertise router information * @param rid Router ID as IPv4 address * @param rid6 Router ID as IPv6 address * * @return New Link State Node */ extern struct ls_node *ls_node_new(struct ls_node_id adv, struct in_addr rid, struct in6_addr rid6); /** * Remove Link State Node. Data structure is freed. * * @param node Pointer to a valid Link State Node structure */ extern void ls_node_del(struct ls_node *node); /** * Check if two Link State Nodes are equal. Note that this routine has the same * return value sense as '==' (which is different from a comparison). * * @param n1 First Link State Node to be compare * @param n2 Second Link State Node to be compare * * @return 1 if equal, 0 otherwise */ extern int ls_node_same(struct ls_node *n1, struct ls_node *n2); /** * Create a new Link State Attributes. Structure is dynamically allocated. * At least one of parameters MUST be valid and not equal to 0. * * @param adv Mandatory Link State Node ID i.e. advertise router ID * @param local Local IPv4 address * @param local6 Local Ipv6 address * @param local_id Local Identifier * * @return New Link State Attributes */ extern struct ls_attributes *ls_attributes_new(struct ls_node_id adv, struct in_addr local, struct in6_addr local6, uint32_t local_id); /** * Remove SRLGs from Link State Attributes if defined. * * @param attr Pointer to a valid Link State Attribute structure */ extern void ls_attributes_srlg_del(struct ls_attributes *attr); /** * Remove Link State Attributes. Data structure is freed. * * @param attr Pointer to a valid Link State Attribute structure */ extern void ls_attributes_del(struct ls_attributes *attr); /** * Check if two Link State Attributes are equal. Note that this routine has the * same return value sense as '==' (which is different from a comparison). * * @param a1 First Link State Attributes to be compare * @param a2 Second Link State Attributes to be compare * * @return 1 if equal, 0 otherwise */ extern int ls_attributes_same(struct ls_attributes *a1, struct ls_attributes *a2); /** * Create a new Link State Prefix. Structure is dynamically allocated. * * @param adv Mandatory Link State Node ID i.e. advertise router ID * @param p Mandatory Prefix * * @return New Link State Prefix */ extern struct ls_prefix *ls_prefix_new(struct ls_node_id adv, struct prefix *p); /** * Remove Link State Prefix. Data Structure is freed. * * @param pref Pointer to a valid Link State Attribute Prefix. */ extern void ls_prefix_del(struct ls_prefix *pref); /** * Check if two Link State Prefix are equal. Note that this routine has the * same return value sense as '==' (which is different from a comparison). * * @param p1 First Link State Prefix to be compare * @param p2 Second Link State Prefix to be compare * * @return 1 if equal, 0 otherwise */ extern int ls_prefix_same(struct ls_prefix *p1, struct ls_prefix *p2); /** * In addition a Graph model is defined as an overlay on top of link state * database in order to ease Path Computation algorithm implementation. * Denoted G(V, E), a graph is composed by a list of Vertices (V) which * represents the network Node and a list of Edges (E) which represents node * Link. An additional list of prefixes (P) is also added. * A prefix (P) is also attached to the Vertex (V) which advertise it. * * Vertex (V) contains the list of outgoing Edges (E) that connect this Vertex * with its direct neighbors and the list of incoming Edges (E) that connect * the direct neighbors to this Vertex. Indeed, the Edge (E) is unidirectional, * thus, it is necessary to add 2 Edges to model a bidirectional relation * between 2 Vertices. * * Edge (E) contains the source and destination Vertex that this Edge * is connecting. * * A unique Key is used to identify both Vertices and Edges within the Graph. * An easy way to build this key is to used the IP address: i.e. loopback * address for Vertices and link IP address for Edges. * * -------------- --------------------------- -------------- * | Connected |---->| Connected Edge Va to Vb |--->| Connected | * --->| Vertex | --------------------------- | Vertex |----> * | | | | * | - Key (Va) | | - Key (Vb) | * <---| - Vertex | --------------------------- | - Vertex |<---- * | |<----| Connected Edge Vb to Va |<---| | * -------------- --------------------------- -------------- * */ enum ls_status { UNSET = 0, NEW, UPDATE, DELETE, SYNC, ORPHAN }; enum ls_type { GENERIC = 0, VERTEX, EDGE, SUBNET }; /* Link State Vertex structure */ PREDECL_RBTREE_UNIQ(vertices); struct ls_vertex { enum ls_type type; /* Link State Type */ enum ls_status status; /* Status of the Vertex in the TED */ struct vertices_item entry; /* Entry in RB Tree */ uint64_t key; /* Unique Key identifier */ struct ls_node *node; /* Link State Node */ struct list *incoming_edges; /* List of incoming Link State links */ struct list *outgoing_edges; /* List of outgoing Link State links */ struct list *prefixes; /* List of advertised prefix */ }; /* Link State Edge Key structure */ struct ls_edge_key { uint8_t family; union { struct in_addr addr; struct in6_addr addr6; uint64_t link_id; } k; }; /* Link State Edge structure */ PREDECL_RBTREE_UNIQ(edges); struct ls_edge { enum ls_type type; /* Link State Type */ enum ls_status status; /* Status of the Edge in the TED */ struct edges_item entry; /* Entry in RB tree */ struct ls_edge_key key; /* Unique Key identifier */ struct ls_attributes *attributes; /* Link State attributes */ struct ls_vertex *source; /* Pointer to the source Vertex */ struct ls_vertex *destination; /* Pointer to the destination Vertex */ }; /* Link State Subnet structure */ PREDECL_RBTREE_UNIQ(subnets); struct ls_subnet { enum ls_type type; /* Link State Type */ enum ls_status status; /* Status of the Subnet in the TED */ struct subnets_item entry; /* Entry in RB tree */ struct prefix key; /* Unique Key identifier */ struct ls_prefix *ls_pref; /* Link State Prefix */ struct ls_vertex *vertex; /* Back pointer to the Vertex owner */ }; /* Declaration of Vertices, Edges and Prefixes RB Trees */ macro_inline int vertex_cmp(const struct ls_vertex *node1, const struct ls_vertex *node2) { return numcmp(node1->key, node2->key); } DECLARE_RBTREE_UNIQ(vertices, struct ls_vertex, entry, vertex_cmp); macro_inline int edge_cmp(const struct ls_edge *edge1, const struct ls_edge *edge2) { if (edge1->key.family != edge2->key.family) return numcmp(edge1->key.family, edge2->key.family); switch (edge1->key.family) { case AF_INET: return memcmp(&edge1->key.k.addr, &edge2->key.k.addr, 4); case AF_INET6: return memcmp(&edge1->key.k.addr6, &edge2->key.k.addr6, 16); case AF_LOCAL: return numcmp(edge1->key.k.link_id, edge2->key.k.link_id); default: return 0; } } DECLARE_RBTREE_UNIQ(edges, struct ls_edge, entry, edge_cmp); /* * Prefix comparison are done to the host part so, 10.0.0.1/24 * and 10.0.0.2/24 are considered different */ macro_inline int subnet_cmp(const struct ls_subnet *a, const struct ls_subnet *b) { if (a->key.family != b->key.family) return numcmp(a->key.family, b->key.family); if (a->key.prefixlen != b->key.prefixlen) return numcmp(a->key.prefixlen, b->key.prefixlen); if (a->key.family == AF_INET) return memcmp(&a->key.u.val, &b->key.u.val, 4); return memcmp(&a->key.u.val, &b->key.u.val, 16); } DECLARE_RBTREE_UNIQ(subnets, struct ls_subnet, entry, subnet_cmp); /* Link State TED Structure */ struct ls_ted { uint32_t key; /* Unique identifier */ char name[MAX_NAME_LENGTH]; /* Name of this graph. Could be null */ uint32_t as_number; /* AS number of the modeled network */ struct ls_vertex *self; /* Vertex of the FRR instance */ struct vertices_head vertices; /* List of Vertices */ struct edges_head edges; /* List of Edges */ struct subnets_head subnets; /* List of Subnets */ }; /* Generic Link State Element */ struct ls_element { enum ls_type type; /* Link State Element Type */ enum ls_status status; /* Link State Status in the TED */ void *data; /* Link State payload */ }; /** * Add new vertex to the Link State DB. Vertex is created from the Link State * Node. Vertex data structure is dynamically allocated. * * @param ted Traffic Engineering Database structure * @param node Link State Node * * @return New Vertex or NULL in case of error */ extern struct ls_vertex *ls_vertex_add(struct ls_ted *ted, struct ls_node *node); /** * Delete Link State Vertex. This function clean internal Vertex lists (incoming * and outgoing Link State Edge and Link State Subnet). Vertex Data structure * is freed but not the Link State Node. Link State DB is not modified if Vertex * is NULL or not found in the Data Base. Note that referenced to Link State * Edges & SubNets are not removed as they could be connected to other Vertices. * * @param ted Traffic Engineering Database structure * @param vertex Link State Vertex to be removed */ extern void ls_vertex_del(struct ls_ted *ted, struct ls_vertex *vertex); /** * Delete Link State Vertex as ls_vertex_del() but also removed associated * Link State Node. * * @param ted Traffic Engineering Database structure * @param vertex Link State Vertex to be removed */ extern void ls_vertex_del_all(struct ls_ted *ted, struct ls_vertex *vertex); /** * Update Vertex with the Link State Node. A new vertex is created if no one * corresponds to the Link State Node. * * @param ted Link State Data Base * @param node Link State Node to be updated * * @return Updated Link State Vertex or Null in case of error */ extern struct ls_vertex *ls_vertex_update(struct ls_ted *ted, struct ls_node *node); /** * Clean Vertex structure by removing all Edges and Subnets marked as ORPHAN * from this vertex. Link State Update message is sent if zclient is not NULL. * * @param ted Link State Data Base * @param vertex Link State Vertex to be cleaned * @param zclient Reference to Zebra Client */ extern void ls_vertex_clean(struct ls_ted *ted, struct ls_vertex *vertex, struct zclient *zclient); /** * This function convert the ISIS ISO system ID into a 64 bits unsigned integer * following the architecture dependent byte order. * * @param sysid The ISO system ID * @return Key as 64 bits unsigned integer */ extern uint64_t sysid_to_key(const uint8_t sysid[ISO_SYS_ID_LEN]); /** * Find Vertex in the Link State DB by its unique key. * * @param ted Link State Data Base * @param key Vertex Key different from 0 * * @return Vertex if found, NULL otherwise */ extern struct ls_vertex *ls_find_vertex_by_key(struct ls_ted *ted, const uint64_t key); /** * Find Vertex in the Link State DB by its Link State Node. * * @param ted Link State Data Base * @param nid Link State Node ID * * @return Vertex if found, NULL otherwise */ extern struct ls_vertex *ls_find_vertex_by_id(struct ls_ted *ted, struct ls_node_id nid); /** * Check if two Vertices are equal. Note that this routine has the same return * value sense as '==' (which is different from a comparison). * * @param v1 First vertex to compare * @param v2 Second vertex to compare * * @return 1 if equal, 0 otherwise */ extern int ls_vertex_same(struct ls_vertex *v1, struct ls_vertex *v2); /** * Add new Edge to the Link State DB. Edge is created from the Link State * Attributes. Edge data structure is dynamically allocated. * * @param ted Link State Data Base * @param attributes Link State attributes * * @return New Edge or NULL in case of error */ extern struct ls_edge *ls_edge_add(struct ls_ted *ted, struct ls_attributes *attributes); /** * Update the Link State Attributes information of an existing Edge. If there is * no corresponding Edge in the Link State Data Base, a new Edge is created. * * @param ted Link State Data Base * @param attributes Link State Attributes * * @return Updated Link State Edge, or NULL in case of error */ extern struct ls_edge *ls_edge_update(struct ls_ted *ted, struct ls_attributes *attributes); /** * Check if two Edges are equal. Note that this routine has the same return * value sense as '==' (which is different from a comparison). * * @param e1 First edge to compare * @param e2 Second edge to compare * * @return 1 if equal, 0 otherwise */ extern int ls_edge_same(struct ls_edge *e1, struct ls_edge *e2); /** * Remove Edge from the Link State DB. Edge data structure is freed but not the * Link State Attributes data structure. Link State DB is not modified if Edge * is NULL or not found in the Data Base. * * @param ted Link State Data Base * @param edge Edge to be removed */ extern void ls_edge_del(struct ls_ted *ted, struct ls_edge *edge); /** * Remove Edge and associated Link State Attributes from the Link State DB. * Link State DB is not modified if Edge is NULL or not found. * * @param ted Link State Data Base * @param edge Edge to be removed */ extern void ls_edge_del_all(struct ls_ted *ted, struct ls_edge *edge); /** * Find Edge in the Link State Data Base by Edge key. * * @param ted Link State Data Base * @param key Edge key * * @return Edge if found, NULL otherwise */ extern struct ls_edge *ls_find_edge_by_key(struct ls_ted *ted, const struct ls_edge_key key); /** * Find Edge in the Link State Data Base by the source (local IPv4 or IPv6 * address or local ID) informations of the Link State Attributes * * @param ted Link State Data Base * @param attributes Link State Attributes * * @return Edge if found, NULL otherwise */ extern struct ls_edge * ls_find_edge_by_source(struct ls_ted *ted, struct ls_attributes *attributes); /** * Find Edge in the Link State Data Base by the destination (remote IPv4 or IPv6 * address of remote ID) information of the Link State Attributes * * @param ted Link State Data Base * @param attributes Link State Attributes * * @return Edge if found, NULL otherwise */ extern struct ls_edge * ls_find_edge_by_destination(struct ls_ted *ted, struct ls_attributes *attributes); /** * Add new Subnet to the Link State DB. Subnet is created from the Link State * prefix. Subnet data structure is dynamically allocated. * * @param ted Link State Data Base * @param pref Link State Prefix * * @return New Subnet */ extern struct ls_subnet *ls_subnet_add(struct ls_ted *ted, struct ls_prefix *pref); /** * Update the Link State Prefix information of an existing Subnet. If there is * no corresponding Subnet in the Link State Data Base, a new Subnet is created. * * @param ted Link State Data Base * @param pref Link State Prefix * * @return Updated Link State Subnet, or NULL in case of error */ extern struct ls_subnet *ls_subnet_update(struct ls_ted *ted, struct ls_prefix *pref); /** * Check if two Subnets are equal. Note that this routine has the same return * value sense as '==' (which is different from a comparison). * * @param s1 First subnet to compare * @param s2 Second subnet to compare * * @return 1 if equal, 0 otherwise */ extern int ls_subnet_same(struct ls_subnet *s1, struct ls_subnet *s2); /** * Remove Subnet from the Link State DB. Subnet data structure is freed but * not the Link State prefix data structure. Link State DB is not modified * if Subnet is NULL or not found in the Data Base. * * @param ted Link State Data Base * @param subnet Subnet to be removed */ extern void ls_subnet_del(struct ls_ted *ted, struct ls_subnet *subnet); /** * Remove Subnet and the associated Link State Prefix from the Link State DB. * Link State DB is not modified if Subnet is NULL or not found. * * @param ted Link State Data Base * @param subnet Subnet to be removed */ extern void ls_subnet_del_all(struct ls_ted *ted, struct ls_subnet *subnet); /** * Find Subnet in the Link State Data Base by prefix. * * @param ted Link State Data Base * @param prefix Link State Prefix * * @return Subnet if found, NULL otherwise */ extern struct ls_subnet *ls_find_subnet(struct ls_ted *ted, const struct prefix *prefix); /** * Create a new Link State Data Base. * * @param key Unique key of the data base. Must be different from 0 * @param name Name of the data base (may be NULL) * @param asn AS Number for this data base. 0 if unknown * * @return New Link State Database or NULL in case of error */ extern struct ls_ted *ls_ted_new(const uint32_t key, const char *name, uint32_t asn); /** * Delete existing Link State Data Base. Vertices, Edges, and Subnets are not * removed. * * @param ted Link State Data Base */ extern void ls_ted_del(struct ls_ted *ted); /** * Delete all Link State Vertices, Edges and SubNets and the Link State DB. * * @param ted Link State Data Base */ extern void ls_ted_del_all(struct ls_ted **ted); /** * Clean Link State Data Base by removing all Vertices, Edges and SubNets marked * as ORPHAN. * * @param ted Link State Data Base */ extern void ls_ted_clean(struct ls_ted *ted); /** * Connect Source and Destination Vertices by given Edge. Only non NULL source * and destination vertices are connected. * * @param src Link State Source Vertex * @param dst Link State Destination Vertex * @param edge Link State Edge. Must not be NULL */ extern void ls_connect_vertices(struct ls_vertex *src, struct ls_vertex *dst, struct ls_edge *edge); /** * Connect Link State Edge to the Link State Vertex which could be a Source or * a Destination Vertex. * * @param vertex Link State Vertex to be connected. Must not be NULL * @param edge Link State Edge connection. Must not be NULL * @param source True for a Source, false for a Destination Vertex */ extern void ls_connect(struct ls_vertex *vertex, struct ls_edge *edge, bool source); /** * Disconnect Link State Edge from the Link State Vertex which could be a * Source or a Destination Vertex. * * @param vertex Link State Vertex to be connected. Must not be NULL * @param edge Link State Edge connection. Must not be NULL * @param source True for a Source, false for a Destination Vertex */ extern void ls_disconnect(struct ls_vertex *vertex, struct ls_edge *edge, bool source); /** * Disconnect Link State Edge from both Source and Destination Vertex. * * @param edge Link State Edge to be disconnected */ extern void ls_disconnect_edge(struct ls_edge *edge); /** * The Link State Message is defined to convey Link State parameters from * the routing protocol (OSPF or IS-IS) to other daemons e.g. BGP. * * The structure is composed of: * - Event of the message: * - Sync: Send the whole LS DB following a request * - Add: Send the a new Link State element * - Update: Send an update of an existing Link State element * - Delete: Indicate that the given Link State element is removed * - Type of Link State element: Node, Attribute or Prefix * - Remote node id when known * - Data: Node, Attributes or Prefix * * A Link State Message can carry only one Link State Element (Node, Attributes * of Prefix) at once, and only one Link State Message is sent through ZAPI * Opaque Link State type at once. */ /* ZAPI Opaque Link State Message Event */ #define LS_MSG_EVENT_UNDEF 0 #define LS_MSG_EVENT_SYNC 1 #define LS_MSG_EVENT_ADD 2 #define LS_MSG_EVENT_UPDATE 3 #define LS_MSG_EVENT_DELETE 4 /* ZAPI Opaque Link State Message sub-Type */ #define LS_MSG_TYPE_NODE 1 #define LS_MSG_TYPE_ATTRIBUTES 2 #define LS_MSG_TYPE_PREFIX 3 /* Link State Message */ struct ls_message { uint8_t event; /* Message Event: Sync, Add, Update, Delete */ uint8_t type; /* Message Data Type: Node, Attribute, Prefix */ struct ls_node_id remote_id; /* Remote Link State Node ID */ union { struct ls_node *node; /* Link State Node */ struct ls_attributes *attr; /* Link State Attributes */ struct ls_prefix *prefix; /* Link State Prefix */ } data; }; /** * Register Link State daemon as a server or client for Zebra OPAQUE API. * * @param zclient Zebra client structure * @param server Register daemon as a server (true) or as a client (false) * * @return 0 if success, -1 otherwise */ extern int ls_register(struct zclient *zclient, bool server); /** * Unregister Link State daemon as a server or client for Zebra OPAQUE API. * * @param zclient Zebra client structure * @param server Unregister daemon as a server (true) or as a client (false) * * @return 0 if success, -1 otherwise */ extern int ls_unregister(struct zclient *zclient, bool server); /** * Send Link State SYNC message to request the complete Link State Database. * * @param zclient Zebra client * * @return 0 if success, -1 otherwise */ extern int ls_request_sync(struct zclient *zclient); /** * Parse Link State Message from stream. Used this function once receiving a * new ZAPI Opaque message of type Link State. * * @param s Stream buffer. Must not be NULL. * * @return New Link State Message or NULL in case of error */ extern struct ls_message *ls_parse_msg(struct stream *s); /** * Delete existing message. Data structure is freed. * * @param msg Link state message to be deleted */ extern void ls_delete_msg(struct ls_message *msg); /** * Send Link State Message as new ZAPI Opaque message of type Link State. * If destination is not NULL, message is sent as Unicast otherwise it is * broadcast to all registered daemon. * * @param zclient Zebra Client * @param msg Link State Message to be sent * @param dst Destination daemon for unicast message, * NULL for broadcast message * * @return 0 on success, -1 otherwise */ extern int ls_send_msg(struct zclient *zclient, struct ls_message *msg, struct zapi_opaque_reg_info *dst); /** * Create a new Link State Message from a Link State Vertex. If Link State * Message is NULL, a new data structure is dynamically allocated. * * @param msg Link State Message to be filled or NULL * @param vertex Link State Vertex. Must not be NULL * * @return New Link State Message msg parameter is NULL or pointer * to the provided Link State Message */ extern struct ls_message *ls_vertex2msg(struct ls_message *msg, struct ls_vertex *vertex); /** * Create a new Link State Message from a Link State Edge. If Link State * Message is NULL, a new data structure is dynamically allocated. * * @param msg Link State Message to be filled or NULL * @param edge Link State Edge. Must not be NULL * * @return New Link State Message msg parameter is NULL or pointer * to the provided Link State Message */ extern struct ls_message *ls_edge2msg(struct ls_message *msg, struct ls_edge *edge); /** * Create a new Link State Message from a Link State Subnet. If Link State * Message is NULL, a new data structure is dynamically allocated. * * @param msg Link State Message to be filled or NULL * @param subnet Link State Subnet. Must not be NULL * * @return New Link State Message msg parameter is NULL or pointer * to the provided Link State Message */ extern struct ls_message *ls_subnet2msg(struct ls_message *msg, struct ls_subnet *subnet); /** * Convert Link State Message into Vertex and update TED accordingly to * the message event: SYNC, ADD, UPDATE or DELETE. * * @param ted Link State Database * @param msg Link State Message * @param delete True to delete the Link State Vertex from the Database, * False otherwise. If true, return value is NULL in case * of deletion. * * @return Vertex if success, NULL otherwise or if Vertex is removed */ extern struct ls_vertex *ls_msg2vertex(struct ls_ted *ted, struct ls_message *msg, bool delete); /** * Convert Link State Message into Edge and update TED accordingly to * the message event: SYNC, ADD, UPDATE or DELETE. * * @param ted Link State Database * @param msg Link State Message * @param delete True to delete the Link State Edge from the Database, * False otherwise. If true, return value is NULL in case * of deletion. * * @return Edge if success, NULL otherwise or if Edge is removed */ extern struct ls_edge *ls_msg2edge(struct ls_ted *ted, struct ls_message *msg, bool delete); /** * Convert Link State Message into Subnet and update TED accordingly to * the message event: SYNC, ADD, UPDATE or DELETE. * * @param ted Link State Database * @param msg Link State Message * @param delete True to delete the Link State Subnet from the Database, * False otherwise. If true, return value is NULL in case * of deletion. * * @return Subnet if success, NULL otherwise or if Subnet is removed */ extern struct ls_subnet *ls_msg2subnet(struct ls_ted *ted, struct ls_message *msg, bool delete); /** * Convert Link State Message into Link State element (Vertex, Edge or Subnet) * and update TED accordingly to the message event: SYNC, ADD, UPDATE or DELETE. * * @param ted Link State Database * @param msg Link State Message * @param delete True to delete the Link State Element from the Database, * False otherwise. If true, return value is NULL in case * of deletion. * * @return Element if success, NULL otherwise or if Element is removed */ extern struct ls_element *ls_msg2ted(struct ls_ted *ted, struct ls_message *msg, bool delete); /** * Convert stream buffer into Link State element (Vertex, Edge or Subnet) and * update TED accordingly to the message event: SYNC, ADD, UPDATE or DELETE. * * @param ted Link State Database * @param s Stream buffer * @param delete True to delete the Link State Element from the Database, * False otherwise. If true, return value is NULL in case * of deletion. * * @return Element if success, NULL otherwise or if Element is removed */ extern struct ls_element *ls_stream2ted(struct ls_ted *ted, struct stream *s, bool delete); /** * Send all the content of the Link State Data Base to the given destination. * Link State content is sent is this order: Vertices, Edges, Subnet. * This function must be used when a daemon request a Link State Data Base * Synchronization. * * @param ted Link State Data Base. Must not be NULL * @param zclient Zebra Client. Must not be NULL * @param dst Destination FRR daemon. Must not be NULL * * @return 0 on success, -1 otherwise */ extern int ls_sync_ted(struct ls_ted *ted, struct zclient *zclient, struct zapi_opaque_reg_info *dst); struct json_object; struct vty; /** * Show Link State Vertex information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param vertex Link State Vertex to show. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_vertex(struct ls_vertex *vertex, struct vty *vty, struct json_object *json, bool verbose); /** * Show all Link State Vertices information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param ted Link State Data Base. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_vertices(struct ls_ted *ted, struct vty *vty, struct json_object *json, bool verbose); /** * Show Link State Edge information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param edge Link State Edge to show. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_edge(struct ls_edge *edge, struct vty *vty, struct json_object *json, bool verbose); /** * Show all Link State Edges information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param ted Link State Data Base. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_edges(struct ls_ted *ted, struct vty *vty, struct json_object *json, bool verbose); /** * Show Link State Subnets information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param subnet Link State Subnet to show. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_subnet(struct ls_subnet *subnet, struct vty *vty, struct json_object *json, bool verbose); /** * Show all Link State Subnet information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param ted Link State Data Base. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_subnets(struct ls_ted *ted, struct vty *vty, struct json_object *json, bool verbose); /** * Show Link State Data Base information. If both vty and json are specified, * Json format output supersedes standard vty output. * * @param ted Link State Data Base to show. Must not be NULL * @param vty Pointer to vty output, could be NULL * @param json Pointer to json output, could be NULL * @param verbose Set to true for more detail */ extern void ls_show_ted(struct ls_ted *ted, struct vty *vty, struct json_object *json, bool verbose); /** * Dump all Link State Data Base elements for debugging purposes * * @param ted Link State Data Base. Must not be NULL * */ extern void ls_dump_ted(struct ls_ted *ted); #ifdef __cplusplus } #endif #endif /* _FRR_LINK_STATE_H_ */