# configure options # # Some can be overridden on rpmbuild commandline with: # rpmbuild --define 'variable value' # (use any value, ie 1 for flag "with_XXXX" definitions) # # E.g. rpmbuild --define 'release_rev 02' may be useful if building # rpms again and again on the same day, so the newer rpms can be installed. # bumping the number each time. #################### FRRouting (FRR) configure options ##################### # with-feature options %{!?with_babeld: %global with_babeld 1 } %{!?with_bfdd: %global with_bfdd 1 } %{!?with_bgp_vnc: %global with_bgp_vnc 0 } %{!?with_cumulus: %global with_cumulus 0 } %{!?with_eigrpd: %global with_eigrpd 1 } %{!?with_fpm: %global with_fpm 1 } %{!?with_ldpd: %global with_ldpd 1 } %{!?with_multipath: %global with_multipath 256 } %{!?with_nhrpd: %global with_nhrpd 1 } %{!?with_ospfapi: %global with_ospfapi 1 } %{!?with_ospfclient: %global with_ospfclient 1 } %{!?with_pam: %global with_pam 0 } %{!?with_pbrd: %global with_pbrd 1 } %{!?with_pimd: %global with_pimd 1 } %{!?with_pim6d: %global with_pim6d 1 } %{!?with_vrrpd: %global with_vrrpd 1 } %{!?with_rtadv: %global with_rtadv 1 } %{!?with_watchfrr: %global with_watchfrr 1 } %{!?with_pathd: %global with_pathd 1 } # user and group %{!?frr_user: %global frr_user frr } %{!?vty_group: %global vty_group frrvty } # path defines %define configdir %{_sysconfdir}/%{name} %define _sbindir /usr/lib/frr %define zeb_src %{_builddir}/%{name}-%{frrversion} %define zeb_rh_src %{zeb_src}/redhat %define zeb_docs %{zeb_src}/doc %define frr_tools %{zeb_src}/tools # defines for configure %define rundir %{_localstatedir}/run/%{name} ############################################################################ #### Version String tweak # Remove invalid characters form version string and replace with _ %{expand: %%global rpmversion %(echo '@VERSION@' | tr [:blank:]- _ )} %define frrversion @VERSION@ #### Check for systemd or init.d (upstart) # Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7) %if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210 %global initsystem systemd %else %if 0%{?rhel} && 0%{?rhel} < 7 %global initsystem upstart %else %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `readlink -f /sbin/init` = /usr/lib/systemd/systemd ]]; then echo systemd; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)} %endif %endif # Check for python version - use python2.7 on CentOS 6, otherwise python3 %if 0%{?rhel} && 0%{?rhel} < 7 %global use_python2 1 %else %global use_python2 0 %endif # If init system is systemd, then always enable watchfrr %if "%{initsystem}" == "systemd" %global with_watchfrr 1 %endif #### Check for RedHat 6.x or CentOS 6.x - they are too old to support PIM. #### Always disable it on these old systems unconditionally # # if CentOS / RedHat and version < 7, then disable PIMd (too old, won't work) %if 0%{?rhel} && 0%{?rhel} < 7 %global with_pimd 0 %global with_pim6d 0 %endif # misc internal defines %{!?frr_uid: %global frr_uid 92 } %{!?frr_gid: %global frr_gid 92 } %{!?vty_gid: %global vty_gid 85 } %define daemon_list zebra ripd ospfd bgpd isisd ripngd ospf6d pbrd staticd bfdd fabricd pathd %if %{with_ldpd} %define daemon_ldpd ldpd %else %define daemon_ldpd "" %endif %if %{with_pimd} %define daemon_pimd pimd %else %define daemon_pimd "" %endif %if %{with_pim6d} %define daemon_pim6d pim6d %else %define daemon_pim6d "" %endif %if %{with_pbrd} %define daemon_pbrd pbrd %else %define daemon_pbrd "" %endif %if %{with_nhrpd} %define daemon_nhrpd nhrpd %else %define daemon_nhrpd "" %endif %if %{with_eigrpd} %define daemon_eigrpd eigrpd %else %define daemon_eigrpd "" %endif %if %{with_babeld} %define daemon_babeld babeld %else %define daemon_babeld "" %endif %if %{with_vrrpd} %define daemon_vrrpd vrrpd %else %define daemon_vrrpd "" %endif %if %{with_watchfrr} %define daemon_watchfrr watchfrr %else %define daemon_watchfrr "" %endif %if %{with_bfdd} %define daemon_bfdd bfdd %else %define daemon_bfdd "" %endif %if %{with_pathd} %define daemon_pathd pathd %else %define daemon_pathd "" %endif %define all_daemons %{daemon_list} %{daemon_ldpd} %{daemon_pimd} %{daemon_pim6d} %{daemon_nhrpd} %{daemon_eigrpd} %{daemon_babeld} %{daemon_watchfrr} %{daemon_pbrd} %{daemon_bfdd} %{daemon_vrrpd} %{daemon_pathd} #release sub-revision (the two digits after the CONFDATE) %{!?release_rev: %global release_rev 01 } Summary: Routing daemon Name: frr Version: %{rpmversion} Release: %{release_rev}%{?dist} License: GPLv2+ Group: System Environment/Daemons Source0: https://github.com/FRRouting/frr/archive/%{name}-%{frrversion}.tar.gz URL: https://www.frrouting.org Requires(pre): shadow-utils Requires(preun): info Requires(post): info BuildRequires: bison >= 2.7 BuildRequires: c-ares-devel BuildRequires: flex BuildRequires: gcc BuildRequires: json-c-devel BuildRequires: libcap-devel BuildRequires: make BuildRequires: ncurses-devel BuildRequires: readline-devel BuildRequires: texinfo BuildRequires: libyang-devel >= 2.1.80 %if 0%{?rhel} && 0%{?rhel} < 7 #python27-devel is available from ius community repo for RedHat/CentOS 6 BuildRequires: python27-devel BuildRequires: python27-sphinx %else %if %{use_python2} BuildRequires: python-devel >= 2.7 BuildRequires: python-sphinx %else BuildRequires: python3-devel BuildRequires: python3-sphinx %endif %endif %if 0%{?rhel} > 7 #platform-python-devel is needed for /usr/bin/pathfix.py BuildRequires: platform-python-devel %endif Requires: initscripts %if %{with_pam} BuildRequires: pam-devel %endif %if "%{initsystem}" == "systemd" BuildRequires: systemd BuildRequires: systemd-devel Requires(post): systemd Requires(preun): systemd Requires(postun): systemd %else Requires(post): chkconfig Requires(preun): chkconfig # Initscripts > 5.60 is required for IPv6 support Requires(pre): initscripts >= 5.60 %endif Provides: routingdaemon = %{version}-%{release} Obsoletes: gated mrt zebra frr-sysvinit Conflicts: bird %description FRRouting is a free software that manages TCP/IP based routing protocol. It takes multi-server and multi-thread approach to resolve the current complexity of the Internet. FRRouting supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng, PIM, LDP NHRP, Babel, PBR, EIGRP and BFD. FRRouting is a fork of Quagga. %package contrib Summary: contrib tools for frr Group: System Environment/Daemons %description contrib Contributed/3rd party tools which may be of use with frr. %package pythontools Summary: python tools for frr %if 0%{?rhel} && 0%{?rhel} < 7 #python27 is available from ius community repo for RedHat/CentOS 6 BuildRequires: python27 Requires: python27-ipaddress %else %if %{use_python2} BuildRequires: python2 Requires: python2-ipaddress %else BuildRequires: python3 %endif %endif Group: System Environment/Daemons %description pythontools Contributed python 2.7 tools which may be of use with frr. %package devel Summary: Header and object files for frr development Group: System Environment/Daemons Requires: %{name} = %{version}-%{release} %description devel The frr-devel package contains the header and object files necessary for developing OSPF-API and frr applications. %package rpki-rtrlib Summary: BGP RPKI support (rtrlib) Group: System Environment/Daemons BuildRequires: librtr-devel >= 0.8 Requires: %{name} = %{version}-%{release} %description rpki-rtrlib Adds RPKI support to FRR's bgpd, allowing validation of BGP routes against cryptographic information stored in WHOIS databases. This is used to prevent hijacking of networks on the wider internet. It is only relevant to internet service providers using their own autonomous system number. %package snmp Summary: SNMP support Group: System Environment/Daemons BuildRequires: net-snmp-devel Requires: %{name} = %{version}-%{release} %description snmp Adds SNMP support to FRR's daemons by attaching to net-snmp's snmpd through the AgentX protocol. Provides read-only access to current routing state through standard SNMP MIBs. %prep %setup -q -n frr-%{frrversion} %build # For standard gcc verbosity, uncomment these lines: #CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith" #CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings" # For ultra gcc verbosity, uncomment these lines also: #CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes" #CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn" #CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code" #CFLAGS="${CFLAGS} -Wpacked -Wpadded" %configure \ --sbindir=%{_sbindir} \ --sysconfdir=%{configdir} \ --localstatedir=%{rundir} \ --disable-static \ --disable-werror \ --enable-irdp \ %if %{with_multipath} --enable-multipath=%{with_multipath} \ %endif --enable-vtysh \ %if %{with_ospfclient} --enable-ospfclient \ %else --disable-ospfclient\ %endif %if %{with_ospfapi} --enable-ospfapi \ %else --disable-ospfapi \ %endif %if %{with_rtadv} --enable-rtadv \ %else --disable-rtadv \ %endif %if %{with_ldpd} --enable-ldpd \ %else --disable-ldpd \ %endif %if %{with_pimd} --enable-pimd \ %else --disable-pimd \ %endif %if %{with_pim6d} --enable-pim6d \ %else --disable-pim6d \ %endif %if %{with_pbrd} --enable-pbrd \ %else --disable-pbrd \ %endif %if %{with_nhrpd} --enable-nhrpd \ %else --disable-nhrpd \ %endif %if %{with_eigrpd} --enable-eigrpd \ %else --disable-eigrpd \ %endif %if %{with_babeld} --enable-babeld \ %else --disable-babeld \ %endif %if %{with_vrrpd} --enable-vrrpd \ %else --disable-vrrpd \ %endif %if %{with_pam} --with-libpam \ %endif %if 0%{?frr_user:1} --enable-user=%{frr_user} \ --enable-group=%{frr_user} \ %endif %if 0%{?vty_group:1} --enable-vty-group=%{vty_group} \ %endif %if %{with_fpm} --enable-fpm \ %else --disable-fpm \ %endif %if %{with_watchfrr} --enable-watchfrr \ %else --disable-watchfrr \ %endif %if %{with_cumulus} --enable-cumulus \ %endif %if %{with_bgp_vnc} --enable-bgp-vnc \ %else --disable-bgp-vnc \ %endif --enable-isisd \ --enable-rpki \ %if %{with_bfdd} --enable-bfdd \ %else --disable-bfdd \ %endif %if %{with_pathd} --enable-pathd \ %else --disable-pathd \ %endif --enable-snmp # end make %{?_smp_mflags} MAKEINFO="makeinfo --no-split" %if %{use_python2} # Change frr-reload.py to use python2.7 sed -e '1c #!/usr/bin/python2.7' -i %{zeb_src}/tools/frr-reload.py sed -e '1c #!/usr/bin/python2.7' -i %{zeb_src}/tools/generate_support_bundle.py %else # Change frr-reload.py to use python3 sed -e '1c #!/usr/bin/python3' -i %{zeb_src}/tools/frr-reload.py sed -e '1c #!/usr/bin/python3' -i %{zeb_src}/tools/generate_support_bundle.py %endif pushd doc make info popd %install mkdir -p %{buildroot}%{_sysconfdir}/{frr,sysconfig,logrotate.d,pam.d,default} \ %{buildroot}%{_infodir} mkdir -m 0755 -p %{buildroot}%{_localstatedir}/log/frr make DESTDIR=%{buildroot} INSTALL="install -p" CP="cp -p" install # Remove this file, as it is uninstalled and causes errors when building on RH9 rm -rf %{buildroot}/usr/share/info/dir # Remove debian init script if it was installed rm -f %{buildroot}%{_sbindir}/frr # kill bogus libtool files rm -vf %{buildroot}%{_libdir}/frr/modules/*.la rm -vf %{buildroot}%{_libdir}/*.la rm -vf %{buildroot}%{_libdir}/frr/libyang_plugins/*.la # install /etc sources %if "%{initsystem}" == "systemd" mkdir -p %{buildroot}%{_unitdir} install -m644 %{zeb_src}/tools/frr.service %{buildroot}%{_unitdir}/frr.service %else mkdir -p %{buildroot}%{_initddir} ln -s %{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr %endif install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr/frr.conf.template install -m644 %{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d/frr install -m644 %{zeb_src}/tools/etc/logrotate.d/frr %{buildroot}%{_sysconfdir}/logrotate.d/frr install -d -m750 %{buildroot}%{rundir} %if 0%{?rhel} > 7 || 0%{?fedora} > 29 # avoid `ERROR: ambiguous python shebang in` errors pathfix.py -pni "%{__python3} %{py3_shbang_opts}" %{buildroot}/usr/lib/frr/*.py %py_byte_compile %{__python3} %{buildroot}/usr/lib/frr/*.py %else # remove ospfclient.py (if present) as it requires > python36 rm -f %{buildroot}%{_sbindir}/ospfclient.py %endif %pre # add vty_group %if 0%{?vty_group:1} getent group %{vty_group} >/dev/null || groupadd -r -g %{vty_gid} %{vty_group} %endif # add frr user and group %if 0%{?frr_user:1} # Ensure that frr_gid gets correctly allocated getent group %{frr_user} >/dev/null || groupadd -g %{frr_gid} %{frr_user} getent passwd %{frr_user} >/dev/null || \ useradd -r -u %{frr_uid} -g %{frr_user} \ -s /sbin/nologin -c "FRRouting suite" \ -d %{rundir} %{frr_user} %if 0%{?vty_group:1} usermod -a -G %{vty_group} %{frr_user} %endif %endif exit 0 %post # zebra_spec_add_service # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service" zebra_spec_add_service () { # Add port /etc/services entry if it isn't already there if [ -f %{_sysconfdir}/services ] && \ ! %__sed -e 's/#.*$//' %{_sysconfdir}/services 2>/dev/null | %__grep -wq $1 ; then echo "$1 $2 # $3" >> %{_sysconfdir}/services fi } zebra_spec_add_service zebrasrv 2600/tcp "zebra service" zebra_spec_add_service zebra 2601/tcp "zebra vty" zebra_spec_add_service staticd 2616/tcp "staticd vty" zebra_spec_add_service ripd 2602/tcp "RIPd vty" zebra_spec_add_service ripngd 2603/tcp "RIPngd vty" zebra_spec_add_service ospfd 2604/tcp "OSPFd vty" zebra_spec_add_service bgpd 2605/tcp "BGPd vty" zebra_spec_add_service ospf6d 2606/tcp "OSPF6d vty" zebra_spec_add_service isisd 2608/tcp "ISISd vty" %if %{with_ospfapi} zebra_spec_add_service ospfapi 2607/tcp "OSPF-API" %endif %if %{with_babeld} zebra_spec_add_service babeld 2609/tcp "BABELd vty" %endif %if %{with_nhrpd} zebra_spec_add_service nhrpd 2610/tcp "NHRPd vty" %endif %if %{with_pimd} zebra_spec_add_service pimd 2611/tcp "PIMd vty" %endif %if %{with_pbrd} zebra_spec_add_service pbrd 2615/tcp "PBRd vty" %endif %if %{with_ldpd} zebra_spec_add_service ldpd 2612/tcp "LDPd vty" %endif %if %{with_eigrpd} zebra_spec_add_service eigrpd 2613/tcp "EIGRPd vty" %endif %if %{with_bfdd} zebra_spec_add_service bfdd 2617/tcp "BFDd vty" %endif zebra_spec_add_service fabricd 2618/tcp "Fabricd vty" %if %{with_vrrpd} zebra_spec_add_service vrrpd 2619/tcp "VRRPd vty" %endif %if %{with_pathd} zebra_spec_add_service pathd 2620/tcp "Pathd vty" %endif %if "%{initsystem}" == "systemd" for daemon in %all_daemons ; do %systemd_post frr.service done %else /sbin/chkconfig --add frr %endif # Fix bad path in previous config files # Config files won't get replaced by default, so we do this ugly hack to fix it %__sed -i 's|watchfrr_options=|#watchfrr_options=|g' %{configdir}/daemons 2> /dev/null || true # With systemd, watchfrr is mandatory. Fix config to make sure it's enabled if # we install or upgrade to a frr built with systemd %if "%{initsystem}" == "systemd" %__sed -i 's|watchfrr_enable=no|watchfrr_enable=yes|g' %{configdir}/daemons 2> /dev/null || true %endif /sbin/install-info %{_infodir}/frr.info.gz %{_infodir}/dir # Create dummy config file if they don't exist so basic functions can be used. if [ ! -e %{configdir}/frr.conf ] && [ ! -e %{configdir}/zebra.conf ]; then # No frr.conf and per daemon configs exist mv %{configdir}/frr.conf.template %{configdir}/frr.conf %if 0%{?frr_user:1} chown %{frr_user}:%{frr_user} %{configdir}/frr.conf %endif chmod 640 %{configdir}/frr.conf fi %if 0%{?frr_user:1} chown %{frr_user}:%{frr_user} %{configdir}/daemons %endif %if %{with_watchfrr} # No config for watchfrr - this is part of /etc/sysconfig/frr rm -f %{configdir}/watchfrr.* %endif if [ ! -e %{configdir}/vtysh.conf ]; then touch %{configdir}/vtysh.conf chmod 640 %{configdir}/vtysh.conf %if 0%{?frr_user:1} %if 0%{?vty_group:1} chown %{frr_user}:%{vty_group} %{configdir}/vtysh.conf* %endif %endif fi %postun if [ "$1" -ge 1 ]; then # # Upgrade from older version # %if "%{initsystem}" == "systemd" ## ## Systemd Version ## %systemd_postun_with_restart frr.service %else ## ## init.d Version ## service frr restart >/dev/null 2>&1 %endif : fi %preun %if "%{initsystem}" == "systemd" ## ## Systemd Version ## if [ $1 -eq 0 ] ; then %systemd_preun frr.service fi %else ## ## init.d Version ## if [ $1 -eq 0 ] ; then service frr stop >/dev/null 2>&1 /sbin/chkconfig --del frr fi %endif /sbin/install-info --delete %{_infodir}/frr.info.gz %{_infodir}/dir %files %doc COPYING %doc doc/mpls %doc README.md /usr/share/yang/*.yang %if 0%{?frr_user:1} %dir %attr(751,%{frr_user},%{frr_user}) %{configdir} %dir %attr(755,%{frr_user},%{frr_user}) %{_localstatedir}/log/frr %dir %attr(751,%{frr_user},%{frr_user}) %{rundir} %else %dir %attr(750,root,root) %{configdir} %dir %attr(755,root,root) %{_localstatedir}/log/frr %dir %attr(750,root,root) %{rundir} %endif %{_infodir}/frr.info.gz %{_mandir}/man*/* %{_sbindir}/zebra %{_sbindir}/staticd %{_sbindir}/ospfd %{_sbindir}/ripd %{_sbindir}/bgpd %{_sbindir}/mgmtd %exclude %{_sbindir}/ssd %if %{with_watchfrr} %{_sbindir}/watchfrr %endif %{_sbindir}/ripngd %{_sbindir}/ospf6d %if %{with_pimd} %{_sbindir}/pimd %endif %if %{with_pim6d} %{_sbindir}/pim6d %endif %if %{with_pbrd} %{_sbindir}/pbrd %endif %if %{with_vrrpd} %{_sbindir}/vrrpd %endif %{_sbindir}/isisd %{_sbindir}/fabricd %if %{with_ldpd} %{_sbindir}/ldpd %endif %if %{with_eigrpd} %{_sbindir}/eigrpd %endif %if %{with_nhrpd} %{_sbindir}/nhrpd %endif %if %{with_babeld} %{_sbindir}/babeld %endif %if %{with_bfdd} %{_sbindir}/bfdd %endif %if %{with_pathd} %{_sbindir}/pathd %{_libdir}/frr/modules/pathd_pcep.so %endif %{_libdir}/libfrr.so* %{_libdir}/libfrrcares* %{_libdir}/libfrrospf* %if %{with_fpm} %{_libdir}/frr/modules/zebra_fpm.so %endif %{_libdir}/frr/modules/zebra_cumulus_mlag.so %{_libdir}/frr/modules/dplane_fpm_nl.so %{_libdir}/frr/modules/zebra_irdp.so %{_libdir}/frr/modules/bgpd_bmp.so %{_libdir}/libfrr_pb.so* %{_libdir}/libfrrfpm_pb.so* %{_libdir}/libmgmt_be_nb.so* %{_bindir}/* %config(noreplace) %{configdir}/[!v]*.conf* %config(noreplace) %attr(750,%{frr_user},%{frr_user}) %{configdir}/daemons %if "%{initsystem}" == "systemd" %{_unitdir}/frr.service %else %{_initddir}/frr %endif %config(noreplace) %{_sysconfdir}/pam.d/frr %config(noreplace) %{_sysconfdir}/logrotate.d/frr %{_sbindir}/frr-reload %{_sbindir}/frrcommon.sh %{_sbindir}/frrinit.sh %{_sbindir}/watchfrr.sh %files contrib %doc tools %files pythontools %{_sbindir}/generate_support_bundle.py %{_sbindir}/frr-reload.py %{_sbindir}/frr_babeltrace.py %if %{with_ospfclient} && (0%{?rhel} > 7 || 0%{?fedora} > 29) %{_sbindir}/ospfclient.py %endif %if 0%{?rhel} > 7 || 0%{?fedora} > 29 %{_sbindir}/__pycache__/* %else %{_sbindir}/generate_support_bundle.pyc %{_sbindir}/generate_support_bundle.pyo %{_sbindir}/frr-reload.pyc %{_sbindir}/frr-reload.pyo %{_sbindir}/frr_babeltrace.pyc %{_sbindir}/frr_babeltrace.pyo %endif %post rpki-rtrlib # add rpki module to daemons sed -i -e 's/^\(bgpd_options=\)\(.*\)\(".*\)/\1\2 -M rpki\3/' %{_sysconfdir}/frr/daemons %postun rpki-rtrlib # remove rpki module from daemons sed -i 's/ -M rpki//' %{_sysconfdir}/frr/daemons %files rpki-rtrlib %{_libdir}/frr/modules/bgpd_rpki.so %files snmp %{_libdir}/libfrrsnmp.so* %{_libdir}/frr/modules/*snmp.so %files devel %{_libdir}/lib*.so %dir %{_includedir}/%{name} %{_includedir}/%{name}/*.h %dir %{_includedir}/%{name}/mgmtd %{_includedir}/%{name}/mgmtd/*.h %dir %{_includedir}/%{name}/ospfd %{_includedir}/%{name}/ospfd/*.h %if %{with_bfdd} %dir %{_includedir}/%{name}/bfdd %{_includedir}/%{name}/bfdd/bfddp_packet.h %endif %if %{with_ospfapi} %dir %{_includedir}/%{name}/ospfapi %{_includedir}/%{name}/ospfapi/*.h %endif %if %{with_eigrpd} %dir %{_includedir}/%{name}/eigrpd %{_includedir}/%{name}/eigrpd/*.h %endif %changelog * Thu Oct 09 2023 Donatas Abraitis - %{version} * Thu Oct 09 2023 Donatas Abraitis - 9.1 - Major highlights: - OSPFv2 HMAC-SHA Cryptographic Authentication - BGP MAC-VRF Site-Of-Origin support - BGP Dynamic capability support - IS-IS SRv6 uSID support (RFC 9352) - Change next-hop resolution via the default route for a traditional profile - Add support for VLAN, ECN, DSCP mangling/filtering - Zebra support for route replace semantics in FPM - New command for BGP `neighbor x addpath-tx-best-selected` - New command for BGP `mpls bgp l3vpn-multi-domain-switching` - A couple more new BGP route-map commands for as-path, communities manipulation * Tue Jun 06 2023 Jafar Al-Gharaibeh - 9.0 - Major highlights: - Centralized Management Daemon (mgmtd) - Switched to libyang minimum version 2.1.80 - Memory footprint for BGP reduced drastically - Add BGP `neighbor path-attribute treat-as-withdraw` command - Add BGP ASN dot notation support (RFC 5396) - Add BGP Software Version capability (draft-abraitis-bgp-version-capability) - Allow BGP peering via 127.0.0.0/8 - Deprecate BGP internet community - this is the Cisco-specific community, which is never been RFC-defined and confusing - Implement `match source-protocol` for BGP route maps - Implement BGP Node Target extended communities (draft-ietf-idr-node-target-ext-comm) - Implement Flex-Algo for SR-MPLS (RFC 9350) - Add support for IS-IS advertise-passive-only - Add IS-IS affinity-map support - Add the graceful-restart hello-delay OSPFv2/OSPFv3 command - Add the `ipv6 mld join` PIMv6 command - Add `allow-ecmp x` RIP/RIPng command - Add BFD support for RIP * Fri Mar 10 2023 Jafar Al-Gharaibeh - 8.5 - Major Highlights: - Add support for per-VRF SRv6 SID - Add BGP labeled-unicast Add-Path functionality - Implementation of SNMP BGP4v2-MIB (IPv6 support) for better network management and monitoring - Add BGP new command neighbor path-attribute discard - Add BGP new command neighbor path-attribute treat-as-withdraw - Implement L3 route-target auto/wildcard configuration - Implement BGP ACCEPT_OWN Community Attribute (rfc7611) - Implement The Accumulated IGP Metric Attribute for BGP (rfc7311) - Implement graceful-shutdown command per neighbor - Add BGP new command to configure TCP keepalives for a peer bgp tcp-keepalive - Traffic control (TC) ZAPI implementation - SRv6 uSID (microSID) implementation - Start deprecating start-shell, ssh, and telnet commands due to security reasons - Add VRRPv3 an ability to disable IPv4 pseudo-header checksum - BFD integration for static routes - Allow protocols to configure BFD sessions with automatic source selection - Allow zero-length opaque LSAs for OSPF (rfc5250) - Add ISIS new command set-overload-bit on-startup - PIMv6 BSM support - For a full list of new features and bug fixes, please refer to: - https://frrouting.org/release/ * Tue Nov 01 2022 Jafar Al-Gharaibeh - 8.4 - New BGP command (neighbor PEER soo) to configure SoO to prevent routing loops and suboptimal routing on dual-homed sites. - Command debug bgp allow-martian replaced to bgp allow-martian-nexthop because previously we allowed using martian next-hops when debug is turned on. - Implement BGP Prefix Origin Validation State Extended Community rfc8097 - Implement Route Leak Prevention and Detection Using Roles in UPDATE and OPEN Messages rfc9234 - BMP L3VPN support - PIMv6 support - MLD support - New command to enable using reserved IPv4 ranges as normal addresses for BGP next-hops, interface addresses, etc. - For a full list of bug fixes, please refer to https://frrouting.org/release/ * Wed Jul 13 2022 Jafar Al-Gharaibeh - 8.3 - General: - Add camelcase json keys in addition to pascalcase (Wrong JSON keys will be depracated) - Fix corruption when route-map delete/add sequence happens (fast re-add) - Reworked gRPC - RFC5424 & journald extended syslog target - bfdd: - Fix broken FSM in active/passive modes - bgpd: - Notification Message Support for BGP Graceful Restart (rfc8538) - BGP Cease Notification Subcode For BFD - Send Hold Timer for BGP (own implementation without an additional knob) - New `set as-path replace` command for BGP route-map - New `match peer` command for BGP route-map - New `ead-es-frag evi-limit` command for EVPN - New `match evpn route-type` command for EVPN route-map to match Type-1/Type-4 - JSON outputs for all RPKI show commands - Set attributes via route-map for BGP conditional advertisements - Pass non-transitive extended communities between RS and RS-clients - Send MED attribute when aggregate prefix is created - Fix aspath memory leak in aggr_suppress_map_test - Fix crash for `show ip bgp vrf all all neighbors 192.168.0.1 ...` - Fix crash for `show ip bgp vrf all all` - Fix memory leak for BGP Community Alias in CLI - Fix memory leak when setting BGP community at egress - Fix memory leak when setting BGP large-community at egress - Fix SR color nexthop processing in BGP - Fix setting local-preference in route-map using +/- - Fix crash using Lua and route-map to set attributes via scripts - Fix crash when issuing various forms of `bgp no-rib` - isisd: - JSON output for show summary command - Fix crash when MTU mismatch occurs - Fix crash with xfrm interface type - Fix infinite loop when parsing LSPs - Fix router capability TLV parsing issues - vtysh: - New `show thread timers` command - ospfd6: - Add LSA statistics to LSA database - Add LSA stats to `show area json` output - Show time left in hello timer for `show ipv6 ospf6 int` - Restart SPF when distance is updated - Support keychain for ospf6 authentication - ospfd: - New `show ip ospf reachable-routers` command - Restart SPF when distance is updated - Use consistent JSON keys for `show ip ospf neighbor` and detail version - pimd: - Add additional IGMP stats - Add IGMP join sent/failed statistics - Add IGMP total groups and total source groups to statistics - New `debug igmp trace detail` command - New `ip pim passive` command - JSON support added for command `show ip igmp sources` - Allow the LPM match work properly with prefix lists and normal RPs - Do not allow 224.0.0.0/24 range in IGMP join - Fix IGMP packet/query check - Handle PIM join/prune receive flow for IPv6 - Handle receive of (*,G) register stop with source address as 0 - Handle of exclude mode IGMPv3 report messages for SSM-aware group - Handle of IGMPv2 report message for SSM-aware group range - Send immediate join with possible sg rpt prune bit set - Show group-type under `show ip pim rp-info` - Show total received messages IGMP stats - staticd: - Capture zebra advertised ECMP limit - Do not register existing nexthop to Zebra - Reject route config with too many nexthops - Track nexthops per-safi - watchfrr: - Add some more information to `show watchfrr` - Send operational state to systemd - zebra: - Add ability to know when FRR is not ASIC offloaded - Add command for setting protodown bit - Add dplane type for netconf data - Add ECMP supported to `show zebra` - Add EVPN status to `show zebra` - Add if v4/v6 forwarding is turned on/off to `show zebra` - Add initial zebra tracepoint support - Add kernel nexthop group support to `show zebra` - Add knowledge about ra and rfc 5549 to `show zebra` - Add mpls status to `show zebra` - Add netlink debug dump for netconf messages - Add netlink debugs for ip rules - Add OS and version to `show zebra` - Add support for end.dt4 - Add to `show zebra` the type of vrf devices being used - Allow *BSD to specify a receive buffer size - Allow multiple connected routes to be choosen for kernel routes - Allow system routes to recurse through themselves - Do not send RAs w/o link-local v6 or on bridge-ports - Evpn disable remove l2vni from l3vni list - Evpn-mh bonds protodown check for set - Evpn-mh use protodown update reason api - Fix cleanup of meta queues on vrf disable - Fix crash in evpn neigh cleanup all - Fix missing delete vtep during vni transition - Fix missing vrf change of l2vni on vxlan interface - Fix rtadv startup when config read in is before interface up - Fix use after deletion event in FreeBSD - Fix v6 route replace failure turned into success - Get zebra graceful restart working when restarting on *BSD - Handle FreeBSD routing socket enobufs - Handle protodown netlink for vxlan device - Include mpls enabled status in interface output - Include old reason in evpn-mh bond update - Keep the interface flags safe on multiple ioctl calls - Let /32 host route with same ip cross vrf - Make router advertisement warnings show up once every 6 hours - Prevent crash if zebra_route_all is used for a route type - Prevent installation of connected multiple times - Protodown-up event trigger interface up - Register nht nexthops with proper safi - Update advertise-svi-ip macips w/ new mac - When handling unprocessed messages from kernel print usable string - New `show ip nht mrib` command - Handle ENOBUFS errors for FreeBSD * Tue Mar 1 2022 Jafar Al-Gharaibeh - 8.2 - The FRRouting community would like to announce FRR Release 8.2. - This release consists of just over 800 commits from 62 authors. - Selected features and bug fixes are listed below. - babeld: - Fix the checks for truncated packets - bfdd: - Correct one spelling error of comment - Fix detection timeout update - Fix possibly wrong counter of control packets - bgpd: - Add "json" option to a few more show commands - Add 'show bgp json detail' header data - Add a 6 hour warning to missing policy - Add an ability to match ipv6 next-hop by prefix-list - Add autocomplete for access-list under bmp node - Add autocomplete for as-path filters - Add autocomplete for set/match community/large/ext lists - Add long-lived graceful restart capability - Add peer-groups to neighbor autocomplete - Adjust symbolic names for cease notifications according to rfc4486 - Deprecate dpa, advertiser and rcid_path path attributes - Extended bgp administrative shutdown communication - Fix crash when using "show bgp vrf all" - Fix inconsistency of match ip/ipv6 next-hop commands - Fix missing name of default vrf - Handle TCP connection errors with connection callbacks for RPKI - Implement llgr helper mode - Implement rfc9072 - Support redirect import more than one route-target ipv6 - docker: - Update alpine build enable set own version - isisd: - Add link state traffic engineering support - Fix router capability tlv parsing issues - Fix running-config for fast-reroute - Make isis work with default vrf name different than 'default' - ospf6d - Add missing vrf parameter to "clear ipv6 ospf6 interface" - Add prompt for commands with non-exist vrf - Add support for nssa type-7 address ranges - Add the ability of specifying router-id/area-id in no debug ospf6 - Do not originate type-4 lsa when nssa - Do not send type-5 into stub area - Fix ecmp inter-area route nexthop update - Fix memory leak for `show ipv6 ospf6 zebra json` - ospfd - Fix wrong comparison of routemap name - Fix crash on "ospf send-extra-data zebra" - Fix incorrect detection of topology changes in helper mode - Fix loss of mixed form in "range" command - Fix no-form of "graceful-restart" command - Fix summary-address deletion - Fix wrong parsing of te subtlv - pbrd - Add vlan actions to vty - Pbr route maps get addr family of nhgs - Protect from a possible null dereference - pimd - Do not allow 224.0.0.0/24 range in igmp join - Fix igmp user config - Fix msdp mesh grp with wildcard member addr - Fix stale forwarding entries left around after join goes away - Fix FRR drops IGMP packets for TOS value other than 0XC0 - redhat - Check if frr.conf already exists - Logrotate file has typo for staticd - ripd - Fix packet send for non primary addresses - vtysh - Add missing rpki node when showing config - Improve startup time by ca. ×6 - remove `address-family evpn` - watchfrr - Allow an integrated config to work within a namespace - zebra - Add optional nhg id output to `show ip ro` - Add resolver flag for nexthop in json - Add support for json output in srv6 locator detail command - Don't lose next hop weights while exporting via fpm - Fix buffer overflow - Fix netns deletion - Fix route-map application when when using vrfs * Tue Nov 2 2021 Jafar Al-Gharaibeh - 8.1 - FRR 8.1 brings a long list of enhancements and fixes with 1200 commits from - 75 developers. Thanks to all contributers. - New Features: - Lua hooks are now feature complete, with one hook available for use (http://docs.frrouting.org/en/latest/scripting.html) - Improvements to SRv6 (Segment Routing over IPv6) (http://docs.frrouting.org/en/latest/zebra.html#segment-routing-ipv6) - Improvements to Prefix-SID (Type 5) - EVPN route type-5 gateway IP overlay Index (http://docs.frrouting.org/en/latest/bgp.html#evpn-overlay-index-gateway-ip) - OSPFv3 NSSA and NSSA totally stub areas (http://docs.frrouting.org/en/latest/ospf6d.html#ospf6-area) - OSPFv3 ASBR summarization (http://docs.frrouting.org/en/latest/ospf6d.html#asbr-summarisation-support-in-ospfv3) - OSPFv3 Graceful Restart (http://docs.frrouting.org/en/latest/ospf6d.html#graceful-restart) - OSPFv2 Graceful Restart (restarting mode added, helper was already implemented) (http://docs.frrouting.org/en/latest/ospfd.html#graceful-restart) - Behavior Changes - Every node in running config now has an explicit "exit" tag - Link bandwidth in BGP is now correctly encoded according to IEEE 754. To stay with old incorrect encoding use: - `neighbor PEER disable-link-bw-encoding-ieee` - Changelog - alpine: Fix path for daemons file install - BGP: - Add "json" option to "show bgp as-path-access-list" - Add `disable-addpath-rx` knob - Add an ability to set extcommunity to none in route-maps - Add counter of displayed show bgp summary when filtering - Add knob to config cond-adv scanner period - Add route-map `match alias` command - Add rpki source address configuration - Add show bgp summary filter by neighbor or as - Add terse display option on show bgp summary - Allow for auto-completion of community alias's created - Bgp knob to teardown session immediately when peer is unreachable - Expand 'bgp default -' cmds - Extend evpn next hop tracking to type-1 and type-4 routes - Fix "no router bgp x vrf default" - Flowspec redirect vrf uses vrf table instead of allocated table id - Handle quick flaps of an evpn prefix properly - Initial batch of evpn lttng tracepoints - Limit processing to what is needed in rpki validation - Modify vrf/view display in show bgp summary - Set 4096 instead of 65535 as new max packet size for a new peer - Set extended msg size only if we advertised and received capability - Show bgp community alias in json community list output - Show bgp prefixes by community alias - Show max packet size per update-group - Split soft reconfigure table task into several jobs to not block vtysh - Store distance received from a redistribute statement - Update route-type-1 legend to match output - ISIS: - Fix sending of lsp with null seqno - lib: - Add "json" option to "show ip[v6] access-list" - Add "json" option to "show ip[v6] prefix-list" - Add "json" option to "show route-map" - Prevent grpc assert on missing yang node - NHRP: - Clear cache when shortcuts are cleared - Fix corrupt address being shown for shortcuts with no cache entry - Set prefix correctly in resolution request - OSPF6: - Add debug commands for lsa all and route all - Add warning log for late hello packets - Add write-multiplier configuration - Don't update router-id if at least one adjacency is full - Extend the "redistribute" command with more options - Fix issue when displaying the redistribute command - Fix logging of border router routes - Json output for database dump show command - Link state id in lsa database json output - Send lsa update immediately when ospf instance is deleted - OSPF: - Fix crash when creating vlink in unknown vrf - Gr conformance fix for hello packet dr election - Print extra lsa information in some log messages - Rfc conformance test case 25.23 issue fix - Show ip ospf route json does not shown metric and tag - Summary lsa is not originated when process is reset - pathd: - Handle pcinitiated configuration, main thread - Handle pcinitiated messages, thread controller - Handle srp_id correctly - If pce ret no-path to pcreq don't retry pcreq nor delegate - PBR: - Add `match ip-protocol [tcp|udp]` - Add ability to set/unset src and dest ports - Nhg "add" edge case for last in table range - Start inclusion of src and dst ports for pbrd - PIM: - Add tos/ttl check for igmp conformance - Allow join prune intervals to be as small as 5 seconds - Allow msdp group name 'default' - Fix register suppress timer code - Fix uaf/heap corruption in bsm code - Fix command "no ip msdp mesh-group member" - Igmp groups are not getting timeout - Igmp memberships are not querier specific - Igmp sockets need to be iface-bound too - Prevent uninited usage of nexthop - Support msdp global timers configuration - vtysh - Add cli timestamp '-t' flag - Add error code if daemon is not running - Fix searching commands in parent nodes - yang: - Add msdp timer configuration - Fix bgp multicast prefix type - Mark a couple of prefix-list/access-list leafs as mandatory - Move multicast prefix type definition - Replace an empty pattern with a zero-length restriction - Rework pim msdp mesh group - Simplify msdp peer handling - zebra : - Add "json" option to "show interface" - Various improvment to dataplane interface - Add message counts for `show zebra client` - Add nhg id to show ip route json - Add show command for ra interface lists - Fix ipv4 routes with ipv6 link local next hops install in fpm - Handle bridge mac address update in evpn contexts - Move individual lines to table in `show zebra client` command - Refresh vxlan evpn contexts, when bridge interface goes up - Update zl3vni when bridge link refreshed in other namespaces * Wed Jul 21 2021 Martin Winter - 8.0 - Major changes - New daemon pathd for segment routing - EVPN Multihoming is now fully supported - OSPFv3 now supports VRFs - TI-LFA has been implemented in IS-IS and OSPF - Ability for Zebra to dump netlink messages in a human-friendly format - LDP gained SNMP support - libyang minimun version is now 2.0 - BABEL: - Add `distribute-list` commands - Fix memory leak in connected route handling - BGP: - Add support for use of aliases with communities - Add support of tcp-mss for neighbors - Add support for EVPN Multihoming - Add ability to show BGP routes from a particular table version - Add support for for RFC 8050 (MRT add-path) - Add SNMP support for MPLS VPN - Add `show bgp summary wide` command to show more detailed output on wide terminals - Add ability for peer-groups to have `ttl-security hops` configured - Add support for conditional Advertisement - Add support for RFC 4271 Delay Open Timer - Add a knob to not advertise until route is installed in fib - Add BGP-wide configuration for graceful shutdown - Add support for RFC 8654 extended messages - Improve RPKI reporting as well as new show commands - Improve handling of VRF route leaking - Improve scaling behavior for dynamic neighbors - Improve LL nexthop tracking to be interface based - Improve route reachability handling with respect to blackhole routes - Improve SNMP traps to RFC 4273 notifications - Improve EVPN routes to use L3 NHG's where applicable - Improvements to EVPN - Improvements to update behavior - Fix various issues with connection resolution - Fix statistics commands in some situations - Fix non-determistic locally-originated paths in bestpath selection - Continue working on transitioning to YANG/Northbound configuration - Various bug fixes and performance improvements - EIGRP: - Add `distribute-list` commands - Ensure received AS number is the same as ours in all situations - Properly validate TLV lengths in some situations - IS-IS: - Add ldb-sync functionality - Add TI-LFA functionality - Add support for Anycast-SID's - Add support for classic LFA RFC 5286 - Add `show isis fast-reroute summary` command - Add support for Remote LFA RFC 7490 - Fix Attach-bit processing in some scenarios - Cleanup BFD integration - Various bug fixes and performance improvements - LDP: - Add SNMP support - Support for LDP IGP Synchronization - Support for RLFA clients - Various bug fixes and performance improvements - LIBFRR: - Various bugfixes and performance improvements - NHRP: - Add `nhrp multicast-nflog-group (1-65535)` command - Add configuration options for vici socket path - Add support for forwarding multicast packets - Fix handling of MTU - Fix handling of NAT extension - Retry IPsec under some conditions - OSPFv2: - Add OSPF GR helper support - Add JSON support for various commands - Add `summary-address A.B.C.D/M ...` commands - Add `area X nssa suppress-fa` command - Add support for TI-LFA - Add support for BFD profiles - Add support for Traffic Engineering database - Add support for usage of DMPVPN with OSPF - Add `clear ip ospf neighbor` commands - Add YANG support for route-maps - Improvements to SNMP - Fixes for type 5 and type 7 LSA handling - Various bug fixes and performance improvements - OSPFv3: - Add support for VRFs - Add JSON support to a bunch of commands - Add ability to control maximum paths for routes - Add `show ipv6 ospf6 vrfs` command - Add support for BFD profiles - Fix to not send hellos on loopbacks - Cleanup area handling around interfaces - YANG support for route-maps - Various bug fixes and performance improvements - OSPFCLIENT: - Cleanup trust of user input - PATHd: - Add support of SR-TE policy management daemon - Add optional support for PCEP to pathd - Integrate PCEP-LIB into FRR - PBR: - Add `set installable` nhg command - Improve interface up/down event handling - PIM: - Add YANG integration - Add JSON support to various commands - Add BFD profile support - Fixes to IGMP conformance - Fixes to behavior surrounding Prune and Prune-pending - Various bug fixes and performance improvements - RIPNG: - Fix interface wakeup after shutdown - SHARP: - Add ability to use Nexthop Groups - Add v4 redistribute watching - Add TED support - Various bug fixes - STATIC: - Fix nexthop handling in some situations - Forbid blackhole and non-blackhole nexthops in a single route - VRRP: - printf formatting cleanups - VTYSH: - Add a `show history` command - Add `show memory ` support - Start deprecation cycle for `address-family evpn` - Display version with --help - Various bug fixes - WATCHFRR: - Fix some crashes - ZEBRA: - Add JSON support to various commands - Add Human readable netlink dumps - Add L2 NHG support - Add support for LSPs to FPM dataplane - Add ability for other protocol daemons to install nexthop groups into the kernel - Add YANG support for route-maps - Improve scale performance when handling a large number of VRF's - Improve network namespace handling - Improve asic-offload handling - Improve FreeBSD interface and route handling - Improve handling of neighbors in kernel dataplane plugin - Improve label manager - Improve route-map processing - Improve debug-ability of routes and VRFs - Improve FPM dataplane plugin - Improve handling of reachability / nexthop tracking on shutdown interfaces - Improve EVPN support - Fix startup handling of `set src X` - Various bug fixes and performance improvements * Wed Mar 3 2021 Martin Winter - 7.5.1 - BABEL: - Fix connected route leak on change - BFD: - Session lookup was sometimes wrong - Memory leak and handling cleanups - In some situations handle vrf appropriately when receiving packets - BGP: - Peer Group Inheritance Fixes - Dissallow attempt to peer peers reachable via blackholes - Send BMP down message when reachability fails - Cleanup handling of aggregator data when the AGG AS is 0 - Handle `neighbor - 7.5 - BFD - Profile support - Minimum ttl support - BGP - rpki VRF support - GR fixes - Add wide option to display of routes - Add `maximum-prefix force` - Add `bestpath-routes` to neighbor command - Add `bgp shutdown message MSG...` command - Add v6 Flowspec support - Add `neighbor shutdown rtt` command - Allow update-delay to be applied globaly - EVPN - Beginning of MultiHoming Support - ISIS - Segment Routing Support - VRF Support - Guard against adj timer display overflow - Add support for Anycast-SIDs - Add support for Topology Independent LFA (TI-LFA) - Add `lsp-gen-interval 2` to isis configuration - OSPF - Segment Routing support for ECMP - Various LSA fixes - Prevent crash if transferring config amongst instances - PBR - Adding json support to commands - DSCP/ECN based PBR Matching - PIM - Add more json support to commands - Fix missing mesh-group commands - MSDP SA forwarding - Clear (s,g,rpt) ifchannel on (*, G) prune received - Fix igmp querier election and IP address mapping - Crash fix when RP is removed - STATIC - Northbound Support - YANG - Filter and route-map Support - OSPF model definition - BGP model definition - VTYSH - Speed up output across daemons - Fix build-time errors for some --enable flags - Speed up output of configuration across daemons - ZEBRA - nexthop group support for FPM - northbound support for rib model - Backup nexthop support - netlink batching support - Allow upper level protocols to request ARP - Add json output for zebra ES, ES-EVI and access vlan dumps - - Upgrade to using libyang1.0.184 - - RPM - Moved RPKI to subpackage - Added SNMP subpackage - - As always there are too many bugfixes to list individually. This release - compromises just over 1k of commits by the community, with contributors from - 70 people. * Tue Jun 30 2020 Martin Winter - 7.4 - BGPd - Use sequence numbers for community lists - Fixes to nexthop groups - Add feature to limit outgoing number of routes - Per Neighbor Graceful Restart - Multiple Graceful Restart fixes - Support sub-Type-4 and sub-Type-5 for the VPNv4 SRv6 backend - rfc7606 support: treat certain malformed routes as withdraw - allow origin override for route aggregates - rfc6608 support: Subcodes for BGP Finite State Machine Error - rfc7607 support: Codification of AS 0 Processing - rfc6286 support: Autonomous-System-Wide Unique BGP Identifier for BGP-4 - Unequal cost multipath (a.ka. weighted ECMP) with BGP link-bandwidth - Enable rfc8212 by default except datacenter profile - staticd - Add debug support - vtysh - Add copy command to copy config from file into running config - LDPd - adding support for LDP ordered label distribution control - ISISd - IS-IS Segment Routing support - SHARPd - add initial support to add/remove lsps - Zebra - fix broadcast address in IPv4 networks with /31 mask - Add Graceful Restart support for Protocol Daemon restarts - lib - migrate route-maps to use northbound interface - plus countless bug fixes and other improvements * Mon Jun 15 2020 Sascha Kattelmann - Add Pathd support * Wed May 06 2020 David Lamparter - 7.3.1 - upstream 7.3.1 * Fri Feb 14 2020 Martin Winter - 7.3 - BGPd - EVPN PIP Support - Route Aggregation code speed ups - BGP Vector I/O speed ups - New CLI: `set distance XXX` - New CLI: `aggregate-address A.B.C.D/M route-map WORD` - New CLI: `bgp reject-as-sets` - New CLI: `advertise pip ...` - New CLI: `match evpn rd ASN:NN_OR_IP-ADDRESS:NN` - New CLI: `show bgp l2vpn evpn community|large-community X` - New CLI: `show bgp l2vpn evpn A.B.C.D` - Auto-completion for clear bgp command - Add ability to set tcp socket buffer size - OSPFd - Partial MPLS TE support - PBRd - New CLI: `set vrf unchanged|NAME` - BFDd - VRF Support - New CLI: 'show bfd peers brief' - New CLI: 'clear bfd peer ...' - PIMd - Significant Speedups in accessing Internal Data for higher scale - Support for joining any-source Multicast - Updated CLI: 'show ip pim upstream-join-desired' - New CLI: 'show ip pim channel' - Debug Cleanup - MLAG experimental support - VRRPd - VRF Support - Northbound Conversion- NHRPd - LDPd - vtysh - New CLI: `banner motd line LINE...` - yang - New CLI: `show yang operational-data XPATH` - New CLI: `debug northbound` - Zebra - Nexthop Group support - New CLI: 'debug zebra nexthop [detail]' - New CLI: 'show router-id' - MLAG experimental support - watchfrr - Additional status messages of system state to systemd - New CLI: `watchfrr ignore DAEMON` - Others - As always all daemons have received too many bug fixes to fully list - There has been a significant focus on increasing test coverage - Change in Behavior: - ISISd - All areas created default automatically to level-1-2 - Zebra - Nexthop Group Installation in Kernel is turned on by default if the kernel supports- New CLI: 'show nexthop-group rib [singleton]' - Man Pages - Renamed to frr-* to remove collision with other packages * Fri Jan 17 2020 Martin Winter - 7.2.1 - BGPd - Fix Addpath issue - Do not apply eBGP policy for iBGP peers - Show `ip` and `fqdn` in json output for `show [ip] bgp json` - Fix large route-distinguisher's format - Fix `no bgp listen range ...` configuration command - Autocomplete neighbor for clear bgp - Reflect the distance in RIB when it is changed for an arbitrary afi/safi - Notify "Peer De-configured" after entering 'no neighbor cmd - Fix per afi/safi addpath peer counting - Rework BGP dampening to be per AFI/SAFI - Do not send next-hop as :: in MP_REACH_NLRI if no link-local exists - Override peer's TTL only if peer-group is configured with TTL - Remove error message for unkown afi/safi combination - Keep the session down if maximum-prefix is reached - OSPFd - Fix BFD down not tearing down OSPF adjacency for point-to-point net - BFDd - Fix multiple VRF handling - VRF security improvement - PIMd - Fix rp crash - NHRPd - Make sure `no ip nhrp map ` works as expected - LDPd - Add missing sanity check in the parsing of label messages - Zebra - Use correct state when installing evpn macs - Capture dplane plugin flags - lib - Fix interface config when vrf changes - Fix Interface Infinite Loop Walk (for special interfaces such as bond) - snapcraft - fix missing vrrpd daemon - Others - Rename man pages (to avoid conflicts with other packages) - Various other fixes for code cleanup and memory leaks * Fri Dec 27 2019 Donatas Abraitis - Add CentOS 8 support * Tue Oct 15 2019 Martin Winter - 7.2 - ALL Daemons - -N to allow for config file locating when running FRR inside of a namespace - Impoved Testing across all daemons - BFD - VRF Support - Conversion to Northbound interface - BGP - Aggregate-address add route-map support - BMP Support - Improved JSON output for many commands - `show bgp afi safi summary failed` command - `clear bop *` clears all peers - Show FQDN for `show bgp ipv4 uni` commands - Display BestPath selection reason as part of show commands - EIGRP - Infrastructure changes to allow VRF's - SIGHUP signals the config reload - Conversion to Northbound interface - ISIS - BFD Support - Support for circuits with MTU > 8192 - PBRD - fwmark support as part of match criteria - autocompletion of PBRMAPS - Improved Nexthop Support - PIMD - PIM-BSM receive support - Improved debugging support - Store ECMP paths that are not currently legal for use - Disallow igmp query from a non-connected source - Many new cli improvements and changes - VRRPD - Add Support for RFC 3768 and RFC 5798 - Route-Maps - Add sequence numbers to access-lists - Add `match ip next-hop type blackhole` - Improved ability to notice dependency changes - SHARPD - `sharp watch [import|nexthop]` you can now specify a prefix instead of assuming a /32 - STATICD - Significantly Improved NHT - ZEBRA - Many dataplane improvements for routes, neighbor table and EVPN - NHT cli can now be specified per VRF and improved ability to control NHT data being shown - Removed duplicate processing of routes - Improved debugablility - RMAC and VxLan support for the FPM - LIB - RCU support - Nexthop Group Improvements - `log-filter WORD` added - Building - openssl support - libcap should be used as part of build or significant slowdowns will be experienced - Lua builds have been fixed - Improved Cross building * Mon Jun 17 2019 David Lamparter - 7.1 - gRPC northbound plugin - "table NNN" removed from zebra - more dataplane MT work - EVPN in non-default VRFs - RFC 8212 (default deny policy for eBGP) - RFC 8106 (IPv6 RA DNS options) * Wed May 8 2019 Martin Winter - 7.0.1 - bgp: - Don't send Updates with BGP Max-Prefix Overflow - Make sure `next-hop-self all` backward compatible with force - Fix as-path validation in "show bgp regexp" - Fix interface-based peers to override peergroups - Fix removing private AS numbers if local-as is used - Fix show bgp labeled_unicast - Add command to lookup prefixes in rpki table - Fix peer count in "show bgp ipv6 summary" - Add missing ipv6 only peer flag action - Fix address family output in "show bgp [ipv4|ipv6] neighbors" - Add missing checks for vpnv6 nexthops - Fix nexthop for ipv6 vpn case - rip: Fix removal of passive interfaces - ospf: - Fix json timer output - Fix milliseconds in json output - bfd: - Fix source port according RFC 5881, Sec 4 - Fix IPv6 link-local peer removal - Fix interface clean up when deleting interface - pim: Fix interface clean up when deleting interface - nhrp: Fix interface clean up when deleting interface - lib: - Workaround to get FRR building with libyang 0.x and 1.x - Fix in priv handling - Make priv elevation thread-safe - zebra: - Pseudowire event recovery - Fix race condition in label manager - Fix system routes selection and next-hop tracking - Set connected route metric based on devaddr metric - Display metric for connected routes - Add selected fib details to json output - Always use replace if installing new route - watchfrr: Silently ignore declare failures (for backward compatibility) - RPM packages: Switch to new init script * Thu Feb 28 2019 Martin Winter - 7.0 - Added libyang dependency: New work for northbound interface based on libyang - Fabricd: New Daemon based on https://datatracker.ietf.org/doc/draft-white-openfabric/ - various bug fixes and other enhancements * Sun Oct 7 2018 Martin Winter - 6.0 - Staticd: New daemon responsible for management of static routes - ISISd: Implement dst-src routing as per draft-ietf-isis-ipv6-dst-src-routing - BFDd: new daemon for BFD (Bidrectional Forwarding Detection). Responsible for notifying link changes to make routing protocols converge faster. - various bug fixes * Thu Jul 5 2018 Martin Winter - 5.0.1 - Support Automake 1.16.1 - BGPd: Support for flowspec ICMP, DSCP, packet length, fragment and tcp flags - BGPd: fix rpki validation for ipv6 - VRF: Workaround for kernel bug on Linux 4.14 and newer - Zebra: Fix interface based routes from zebra not marked up - Zebra: Fix large zebra memory usage when redistribute between protocols - Zebra: Allow route-maps to match on source instance - BGPd: Backport peer-attr overrides, peer-level enforce-first-as and filtered-routes fix - BGPd: fix for crash during display of filtered-routes - BGPd: Actually display labeled unicast routes received - Label Manager: Fix to work correctly behind a label manager proxy * Thu Jun 7 2018 Martin Winter - 5.0 - PIM: Add a Multicast Trace Command draft-ietf-idmr-traceroute-ipm-05 - IS-IS: Implement Three-Way Handshake as per RFC5303 - BGPD: Implement VPN-VRF route leaking per RFC4364. - BGPD: Implement VRF with NETNS backend - BGPD: Flowspec - PBRD: Add a new Policy Based Routing Daemon * Mon May 28 2018 Rafael Zalamena - Add BFDd support * Sun May 20 2018 Martin Winter - Fixed RPKI RPM build * Sun Mar 4 2018 Martin Winter - Add option to build with RPKI (default: disabled) * Tue Feb 20 2018 Martin Winter - Adapt to new documentation structure based on Sphinx * Fri Oct 20 2017 Martin Winter - Fix script location for watchfrr restart functions in daemon config - Fix postun script to restart frr during upgrade * Mon Jun 5 2017 Martin Winter - added NHRP and EIGRP daemon * Mon Apr 17 2017 Martin Winter - new subpackage frr-pythontools with python 2.7 restart script - remove PIMd from CentOS/RedHat 6 RPM packages (won't work - too old) - converted to single frr init script (not per daemon) based on debian init script - created systemd service file for systemd based systems (which uses init script) - Various other RPM package fixes for FRR 2.0 * Fri Jan 6 2017 Martin Winter - Renamed to frr for FRRouting fork of Quagga * Thu Feb 11 2016 Paul Jakma - remove with_ipv6 conditionals, always build v6 - Fix UTF-8 char in spec changelog - remove quagga.pam.stack, long deprecated. * Thu Oct 22 2015 Martin Winter - Cleanup configure: remove --enable-ipv6 (default now), --enable-nssa, --enable-netlink - Remove support for old fedora 4/5 - Fix for package nameing - Fix Weekdays of previous changelogs (bogus dates) - Add conditional logic to only build tex footnotes with supported texi2html - Added pimd to files section and fix double listing of /var/lib*/quagga - Numerous fixes to unify upstart/systemd startup into same spec file - Only allow use of watchfrr for non-systemd systems. no need with systemd * Fri Sep 4 2015 Paul Jakma - buildreq updates - add a default define for with_pimd * Mon Sep 12 2005 Paul Jakma - Steal some changes from Fedora spec file: - Add with_rtadv variable - Test for groups/users with getent before group/user adding - Readline need not be an explicit prerequisite - install-info delete should be postun, not preun * Wed Jan 12 2005 Andrew J. Schorr - on package upgrade, implement careful, phased restart logic - use gcc -rdynamic flag when linking for better backtraces * Wed Dec 22 2004 Andrew J. Schorr - daemonv6_list should contain only IPv6 daemons * Wed Dec 22 2004 Andrew J. Schorr - watchfrr added - on upgrade, all daemons should be condrestart'ed - on removal, all daemons should be stopped * Mon Nov 08 2004 Paul Jakma - Use makeinfo --html to generate quagga.html * Sun Nov 07 2004 Paul Jakma - Fix with_ipv6 set to 0 build * Sat Oct 23 2004 Paul Jakma - Update to 0.97.2 * Sat Oct 23 2004 Andrew J. Schorr - Make directories be owned by the packages concerned - Update logrotate scripts to use correct path to killall and use pid files * Fri Oct 08 2004 Paul Jakma - Update to 0.97.0 * Wed Sep 15 2004 Paul Jakma - build snmp support by default - build irdp support - build with shared libs - devel subpackage for archives and headers * Thu Jan 08 2004 Paul Jakma - updated sysconfig files to specify local dir - added ospf_dump.c crash quick fix patch - added ospfd persistent interface configuration patch * Tue Dec 30 2003 Paul Jakma - sync to CVS - integrate RH sysconfig patch to specify daemon options (RH) - default to have vty listen only to 127.1 (RH) - add user with fixed UID/GID (RH) - create user with shell /sbin/nologin rather than /bin/false (RH) - stop daemons on uninstall (RH) - delete info file on preun, not postun to avoid deletion on upgrade. (RH) - isisd added - cleanup tasks carried out for every daemon * Sun Nov 2 2003 Paul Jakma - Fix -devel package to include all files - Sync to 0.96.4 * Tue Aug 12 2003 Paul Jakma - Renamed to Quagga - Sync to Quagga release 0.96 * Thu Mar 20 2003 Paul Jakma - zebra privileges support * Tue Mar 18 2003 Paul Jakma - Fix mem leak in 'show thread cpu' - Ralph Keller's OSPF-API - Amir: Fix configure.ac for net-snmp * Sat Mar 1 2003 Paul Jakma - ospfd IOS prefix to interface matching for 'network' statement - temporary fix for PtP and IPv6 - sync to zebra.org CVS * Mon Jan 20 2003 Paul Jakma - update to latest cvs - Yon's "show thread cpu" patch - 17217 - walk up tree - 17218 - ospfd NSSA fixes - 16681 - ospfd nsm fixes - 16824 - ospfd OLSA fixes and new feature - 16823 - KAME and ifindex fixes - 16525 - spec file changes to allow redhat files to be in tree * Sat Dec 28 2002 Alexander Hoogerhuis - Added conditionals for building with(out) IPv6, vtysh, RIP, BGP - Fixed up some build requirements (patch) - Added conditional build requirements for vtysh / snmp - Added conditional to files for _bindir depending on vtysh * Mon Nov 11 2002 Paul Jakma - update to latest CVS - add Greg Troxel's md5 buffer copy/dup fix - add RIPv1 fix - add Frank's multicast flag fix * Wed Oct 09 2002 Paul Jakma - update to latest CVS - timestamped crypt_seqnum patch - oi->on_write_q fix * Mon Sep 30 2002 Paul Jakma - update to latest CVS - add vtysh 'write-config (integrated|daemon)' patch - always 'make rebuild' in vtysh/ to catch new commands * Fri Sep 13 2002 Paul Jakma - update to 0.93b * Wed Sep 11 2002 Paul Jakma - update to latest CVS - add "/sbin/ip route flush proto zebra" to zebra RH init on startup * Sat Aug 24 2002 Paul Jakma - update to current CVS - add OSPF point to multipoint patch - add OSPF bugfixes - add BGP hash optimisation patch * Fri Jun 14 2002 Paul Jakma - update to 0.93-pre1 / CVS - add link state detection support - add generic PtP and RFC3021 support - various bug fixes * Thu Aug 09 2001 Elliot Lee 0.91a-6 - Fix bug #51336 * Wed Aug 1 2001 Trond Eivind Glomsrød 0.91a-5 - Use generic initscript strings instead of initscript specific ( "Starting foo: " -> "Starting $prog:" ) * Fri Jul 27 2001 Elliot Lee 0.91a-4 - Bump the release when rebuilding into the dist. * Tue Feb 6 2001 Tim Powers - built for Powertools * Sun Feb 4 2001 Pekka Savola - Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org. - Update to 0.91a - Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc. - Should be quite Red Hat'isque now.