diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/config/pack.txt | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt new file mode 100644 index 0000000..f50df9d --- /dev/null +++ b/Documentation/config/pack.txt @@ -0,0 +1,202 @@ +pack.window:: + The size of the window used by linkgit:git-pack-objects[1] when no + window size is given on the command line. Defaults to 10. + +pack.depth:: + The maximum delta depth used by linkgit:git-pack-objects[1] when no + maximum depth is given on the command line. Defaults to 50. + Maximum value is 4095. + +pack.windowMemory:: + The maximum size of memory that is consumed by each thread + in linkgit:git-pack-objects[1] for pack window memory when + no limit is given on the command line. The value can be + suffixed with "k", "m", or "g". When left unconfigured (or + set explicitly to 0), there will be no limit. + +pack.compression:: + An integer -1..9, indicating the compression level for objects + in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to -1, the zlib default, which is "a default + compromise between speed and compression (currently equivalent + to level 6)." ++ +Note that changing the compression level will not automatically recompress +all existing objects. You can force recompression by passing the -F option +to linkgit:git-repack[1]. + +pack.allowPackReuse:: + When true, and when reachability bitmaps are enabled, + pack-objects will try to send parts of the bitmapped packfile + verbatim. This can reduce memory and CPU usage to serve fetches, + but might result in sending a slightly larger pack. Defaults to + true. + +pack.island:: + An extended regular expression configuring a set of delta + islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1] + for details. + +pack.islandCore:: + Specify an island name which gets to have its objects be + packed first. This creates a kind of pseudo-pack at the front + of one pack, so that the objects from the specified island are + hopefully faster to copy into any pack that should be served + to a user requesting these objects. In practice this means + that the island specified should likely correspond to what is + the most commonly cloned in the repo. See also "DELTA ISLANDS" + in linkgit:git-pack-objects[1]. + +pack.deltaCacheSize:: + The maximum memory in bytes used for caching deltas in + linkgit:git-pack-objects[1] before writing them out to a pack. + This cache is used to speed up the writing object phase by not + having to recompute the final delta result once the best match + for all objects is found. Repacking large repositories on machines + which are tight with memory might be badly impacted by this though, + especially if this cache pushes the system into swapping. + A value of 0 means no limit. The smallest size of 1 byte may be + used to virtually disable this cache. Defaults to 256 MiB. + +pack.deltaCacheLimit:: + The maximum size of a delta, that is cached in + linkgit:git-pack-objects[1]. This cache is used to speed up the + writing object phase by not having to recompute the final delta + result once the best match for all objects is found. + Defaults to 1000. Maximum value is 65535. + +pack.threads:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that linkgit:git-pack-objects[1] + be compiled with pthreads otherwise this option is ignored with a + warning. This is meant to reduce packing time on multiprocessor + machines. The required amount of memory for the delta search window + is however multiplied by the number of threads. + Specifying 0 will cause Git to auto-detect the number of CPUs + and set the number of threads accordingly. + +pack.indexVersion:: + Specify the default pack index version. Valid values are 1 for + legacy pack index used by Git versions prior to 1.5.2, and 2 for + the new pack index with capabilities for packs larger than 4 GB + as well as proper protection against the repacking of corrupted + packs. Version 2 is the default. Note that version 2 is enforced + and this config option is ignored whenever the corresponding pack is + larger than 2 GB. ++ +If you have an old Git that does not understand the version 2 `*.idx` file, +cloning or fetching over a non-native protocol (e.g. "http") +that will copy both `*.pack` file and corresponding `*.idx` file from the +other side may give you a repository that cannot be accessed with your +older version of Git. If the `*.pack` file is smaller than 2 GB, however, +you can use linkgit:git-index-pack[1] on the *.pack file to regenerate +the `*.idx` file. + +pack.packSizeLimit:: + The maximum size of a pack. This setting only affects + packing to a file when repacking, i.e. the git:// protocol + is unaffected. It can be overridden by the `--max-pack-size` + option of linkgit:git-repack[1]. Reaching this limit results + in the creation of multiple packfiles. ++ +Note that this option is rarely useful, and may result in a larger total +on-disk size (because Git will not store deltas between packs) and +worse runtime performance (object lookup within multiple packs is +slower than a single pack, and optimizations like reachability bitmaps +cannot cope with multiple packs). ++ +If you need to actively run Git using smaller packfiles (e.g., because your +filesystem does not support large files), this option may help. But if +your goal is to transmit a packfile over a medium that supports limited +sizes (e.g., removable media that cannot store the whole repository), +you are likely better off creating a single large packfile and splitting +it using a generic multi-volume archive tool (e.g., Unix `split`). ++ +The minimum size allowed is limited to 1 MiB. The default is unlimited. +Common unit suffixes of 'k', 'm', or 'g' are supported. + +pack.useBitmaps:: + When true, git will use pack bitmaps (if available) when packing + to stdout (e.g., during the server side of a fetch). Defaults to + true. You should not generally need to turn this off unless + you are debugging pack bitmaps. + +pack.useBitmapBoundaryTraversal:: + When true, Git will use an experimental algorithm for computing + reachability queries with bitmaps. Instead of building up + complete bitmaps for all of the negated tips and then OR-ing + them together, consider negated tips with existing bitmaps as + additive (i.e. OR-ing them into the result if they exist, + ignoring them otherwise), and build up a bitmap at the boundary + instead. ++ +When using this algorithm, Git may include too many objects as a result +of not opening up trees belonging to certain UNINTERESTING commits. This +inexactness matches the non-bitmap traversal algorithm. ++ +In many cases, this can provide a speed-up over the exact algorithm, +particularly when there is poor bitmap coverage of the negated side of +the query. + +pack.useSparse:: + When true, git will default to using the '--sparse' option in + 'git pack-objects' when the '--revs' option is present. This + algorithm only walks trees that appear in paths that introduce new + objects. This can have significant performance benefits when + computing a pack to send a small change. However, it is possible + that extra objects are added to the pack-file if the included + commits contain certain types of direct renames. Default is + `true`. + +pack.preferBitmapTips:: + When selecting which commits will receive bitmaps, prefer a + commit at the tip of any reference that is a suffix of any value + of this configuration over any other commits in the "selection + window". ++ +Note that setting this configuration to `refs/foo` does not mean that +the commits at the tips of `refs/foo/bar` and `refs/foo/baz` will +necessarily be selected. This is because commits are selected for +bitmaps from within a series of windows of variable length. ++ +If a commit at the tip of any reference which is a suffix of any value +of this configuration is seen in a window, it is immediately given +preference over any other commit in that window. + +pack.writeBitmaps (deprecated):: + This is a deprecated synonym for `repack.writeBitmaps`. + +pack.writeBitmapHashCache:: + When true, git will include a "hash cache" section in the bitmap + index (if one is written). This cache can be used to feed git's + delta heuristics, potentially leading to better deltas between + bitmapped and non-bitmapped objects (e.g., when serving a fetch + between an older, bitmapped pack and objects that have been + pushed since the last gc). The downside is that it consumes 4 + bytes per object of disk space. Defaults to true. ++ +When writing a multi-pack reachability bitmap, no new namehashes are +computed; instead, any namehashes stored in an existing bitmap are +permuted into their appropriate location when writing a new bitmap. + +pack.writeBitmapLookupTable:: + When true, Git will include a "lookup table" section in the + bitmap index (if one is written). This table is used to defer + loading individual bitmaps as late as possible. This can be + beneficial in repositories that have relatively large bitmap + indexes. Defaults to false. + +pack.readReverseIndex:: + When true, git will read any .rev file(s) that may be available + (see: linkgit:gitformat-pack[5]). When false, the reverse index + will be generated from scratch and stored in memory. Defaults to + true. + +pack.writeReverseIndex:: + When true, git will write a corresponding .rev file (see: + linkgit:gitformat-pack[5]) + for each new packfile that it writes in all places except for + linkgit:git-fast-import[1] and in the bulk checkin mechanism. + Defaults to true. |