diff options
Diffstat (limited to 'Documentation/git-format-patch.txt')
-rw-r--r-- | Documentation/git-format-patch.txt | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt new file mode 100644 index 0000000..aaafce2 --- /dev/null +++ b/Documentation/git-format-patch.txt @@ -0,0 +1,781 @@ +git-format-patch(1) +=================== + +NAME +---- +git-format-patch - Prepare patches for e-mail submission + + +SYNOPSIS +-------- +[verse] +'git format-patch' [-k] [(-o|--output-directory) <dir> | --stdout] + [--no-thread | --thread[=<style>]] + [(--attach|--inline)[=<boundary>] | --no-attach] + [-s | --signoff] + [--signature=<signature> | --no-signature] + [--signature-file=<file>] + [-n | --numbered | -N | --no-numbered] + [--start-number <n>] [--numbered-files] + [--in-reply-to=<message id>] [--suffix=.<sfx>] + [--ignore-if-in-upstream] [--always] + [--cover-from-description=<mode>] + [--rfc] [--subject-prefix=<subject prefix>] + [(--reroll-count|-v) <n>] + [--to=<email>] [--cc=<email>] + [--[no-]cover-letter] [--quiet] + [--[no-]encode-email-headers] + [--no-notes | --notes[=<ref>]] + [--interdiff=<previous>] + [--range-diff=<previous> [--creation-factor=<percent>]] + [--filename-max-length=<n>] + [--progress] + [<common diff options>] + [ <since> | <revision range> ] + +DESCRIPTION +----------- + +Prepare each non-merge commit with its "patch" in +one "message" per commit, formatted to resemble a UNIX mailbox. +The output of this command is convenient for e-mail submission or +for use with 'git am'. + +A "message" generated by the command consists of three parts: + +* A brief metadata header that begins with `From <commit>` + with a fixed `Mon Sep 17 00:00:00 2001` datestamp to help programs + like "file(1)" to recognize that the file is an output from this + command, fields that record the author identity, the author date, + and the title of the change (taken from the first paragraph of the + commit log message). + +* The second and subsequent paragraphs of the commit log message. + +* The "patch", which is the "diff -p --stat" output (see + linkgit:git-diff[1]) between the commit and its parent. + +The log message and the patch are separated by a line with a +three-dash line. + +There are two ways to specify which commits to operate on. + +1. A single commit, <since>, specifies that the commits leading + to the tip of the current branch that are not in the history + that leads to the <since> to be output. + +2. Generic <revision range> expression (see "SPECIFYING + REVISIONS" section in linkgit:gitrevisions[7]) means the + commits in the specified range. + +The first rule takes precedence in the case of a single <commit>. To +apply the second rule, i.e., format everything since the beginning of +history up until <commit>, use the `--root` option: `git format-patch +--root <commit>`. If you want to format only <commit> itself, you +can do this with `git format-patch -1 <commit>`. + +By default, each output file is numbered sequentially from 1, and uses the +first line of the commit message (massaged for pathname safety) as +the filename. With the `--numbered-files` option, the output file names +will only be numbers, without the first line of the commit appended. +The names of the output files are printed to standard +output, unless the `--stdout` option is specified. + +If `-o` is specified, output files are created in <dir>. Otherwise +they are created in the current working directory. The default path +can be set with the `format.outputDirectory` configuration option. +The `-o` option takes precedence over `format.outputDirectory`. +To store patches in the current working directory even when +`format.outputDirectory` points elsewhere, use `-o .`. All directory +components will be created. + +By default, the subject of a single patch is "[PATCH] " followed by +the concatenation of lines from the commit message up to the first blank +line (see the DISCUSSION section of linkgit:git-commit[1]). + +When multiple patches are output, the subject prefix will instead be +"[PATCH n/m] ". To force 1/1 to be added for a single patch, use `-n`. +To omit patch numbers from the subject, use `-N`. + +If given `--thread`, `git-format-patch` will generate `In-Reply-To` and +`References` headers to make the second and subsequent patch mails appear +as replies to the first mail; this also generates a `Message-ID` header to +reference. + +OPTIONS +------- +:git-format-patch: 1 +include::diff-options.txt[] + +-<n>:: + Prepare patches from the topmost <n> commits. + +-o <dir>:: +--output-directory <dir>:: + Use <dir> to store the resulting files, instead of the + current working directory. + +-n:: +--numbered:: + Name output in '[PATCH n/m]' format, even with a single patch. + +-N:: +--no-numbered:: + Name output in '[PATCH]' format. + +--start-number <n>:: + Start numbering the patches at <n> instead of 1. + +--numbered-files:: + Output file names will be a simple number sequence + without the default first line of the commit appended. + +-k:: +--keep-subject:: + Do not strip/add '[PATCH]' from the first line of the + commit log message. + +-s:: +--signoff:: + Add a `Signed-off-by` trailer to the commit message, using + the committer identity of yourself. + See the signoff option in linkgit:git-commit[1] for more information. + +--stdout:: + Print all commits to the standard output in mbox format, + instead of creating a file for each one. + +--attach[=<boundary>]:: + Create multipart/mixed attachment, the first part of + which is the commit message and the patch itself in the + second part, with `Content-Disposition: attachment`. + +--no-attach:: + Disable the creation of an attachment, overriding the + configuration setting. + +--inline[=<boundary>]:: + Create multipart/mixed attachment, the first part of + which is the commit message and the patch itself in the + second part, with `Content-Disposition: inline`. + +--thread[=<style>]:: +--no-thread:: + Controls addition of `In-Reply-To` and `References` headers to + make the second and subsequent mails appear as replies to the + first. Also controls generation of the `Message-ID` header to + reference. ++ +The optional <style> argument can be either `shallow` or `deep`. +'shallow' threading makes every mail a reply to the head of the +series, where the head is chosen from the cover letter, the +`--in-reply-to`, and the first patch mail, in this order. 'deep' +threading makes every mail a reply to the previous one. ++ +The default is `--no-thread`, unless the `format.thread` configuration +is set. `--thread` without an argument is equivalent to `--thread=shallow`. ++ +Beware that the default for 'git send-email' is to thread emails +itself. If you want `git format-patch` to take care of threading, you +will want to ensure that threading is disabled for `git send-email`. + +--in-reply-to=<message id>:: + Make the first mail (or all the mails with `--no-thread`) appear as a + reply to the given <message id>, which avoids breaking threads to + provide a new patch series. + +--ignore-if-in-upstream:: + Do not include a patch that matches a commit in + <until>..<since>. This will examine all patches reachable + from <since> but not from <until> and compare them with the + patches being generated, and any patch that matches is + ignored. + +--always:: + Include patches for commits that do not introduce any change, + which are omitted by default. + +--cover-from-description=<mode>:: + Controls which parts of the cover letter will be automatically + populated using the branch's description. ++ +If `<mode>` is `message` or `default`, the cover letter subject will be +populated with placeholder text. The body of the cover letter will be +populated with the branch's description. This is the default mode when +no configuration nor command line option is specified. ++ +If `<mode>` is `subject`, the first paragraph of the branch description will +populate the cover letter subject. The remainder of the description will +populate the body of the cover letter. ++ +If `<mode>` is `auto`, if the first paragraph of the branch description +is greater than 100 bytes, then the mode will be `message`, otherwise +`subject` will be used. ++ +If `<mode>` is `none`, both the cover letter subject and body will be +populated with placeholder text. + +--description-file=<file>:: + Use the contents of <file> instead of the branch's description + for generating the cover letter. + +--subject-prefix=<subject prefix>:: + Instead of the standard '[PATCH]' prefix in the subject + line, instead use '[<subject prefix>]'. This can be used + to name a patch series, and can be combined with the + `--numbered` option. ++ +The configuration variable `format.subjectPrefix` may also be used +to configure a subject prefix to apply to a given repository for +all patches. This is often useful on mailing lists which receive +patches for several repositories and can be used to disambiguate +the patches (with a value of e.g. "PATCH my-project"). + +--filename-max-length=<n>:: + Instead of the standard 64 bytes, chomp the generated output + filenames at around '<n>' bytes (too short a value will be + silently raised to a reasonable length). Defaults to the + value of the `format.filenameMaxLength` configuration + variable, or 64 if unconfigured. + +--rfc:: + Prepends "RFC" to the subject prefix (producing "RFC PATCH" by + default). RFC means "Request For Comments"; use this when sending + an experimental patch for discussion rather than application. + +-v <n>:: +--reroll-count=<n>:: + Mark the series as the <n>-th iteration of the topic. The + output filenames have `v<n>` prepended to them, and the + subject prefix ("PATCH" by default, but configurable via the + `--subject-prefix` option) has ` v<n>` appended to it. E.g. + `--reroll-count=4` may produce `v4-0001-add-makefile.patch` + file that has "Subject: [PATCH v4 1/20] Add makefile" in it. + `<n>` does not have to be an integer (e.g. "--reroll-count=4.4", + or "--reroll-count=4rev2" are allowed), but the downside of + using such a reroll-count is that the range-diff/interdiff + with the previous version does not state exactly which + version the new iteration is compared against. + +--to=<email>:: + Add a `To:` header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + The negated form `--no-to` discards all `To:` headers added so + far (from config or command line). + +--cc=<email>:: + Add a `Cc:` header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + The negated form `--no-cc` discards all `Cc:` headers added so + far (from config or command line). + +--from:: +--from=<ident>:: + Use `ident` in the `From:` header of each commit email. If the + author ident of the commit is not textually identical to the + provided `ident`, place a `From:` header in the body of the + message with the original author. If no `ident` is given, use + the committer ident. ++ +Note that this option is only useful if you are actually sending the +emails and want to identify yourself as the sender, but retain the +original author (and `git am` will correctly pick up the in-body +header). Note also that `git send-email` already handles this +transformation for you, and this option should not be used if you are +feeding the result to `git send-email`. + +--[no-]force-in-body-from:: + With the e-mail sender specified via the `--from` option, by + default, an in-body "From:" to identify the real author of + the commit is added at the top of the commit log message if + the sender is different from the author. With this option, + the in-body "From:" is added even when the sender and the + author have the same name and address, which may help if the + mailing list software mangles the sender's identity. + Defaults to the value of the `format.forceInBodyFrom` + configuration variable. + +--add-header=<header>:: + Add an arbitrary header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + For example, `--add-header="Organization: git-foo"`. + The negated form `--no-add-header` discards *all* (`To:`, + `Cc:`, and custom) headers added so far from config or command + line. + +--[no-]cover-letter:: + In addition to the patches, generate a cover letter file + containing the branch description, shortlog and the overall diffstat. You can + fill in a description in the file before sending it out. + +--encode-email-headers:: +--no-encode-email-headers:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047), instead of outputting the + headers verbatim. Defaults to the value of the + `format.encodeEmailHeaders` configuration variable. + +--interdiff=<previous>:: + As a reviewer aid, insert an interdiff into the cover letter, + or as commentary of the lone patch of a 1-patch series, showing + the differences between the previous version of the patch series and + the series currently being formatted. `previous` is a single revision + naming the tip of the previous series which shares a common base with + the series being formatted (for example `git format-patch + --cover-letter --interdiff=feature/v1 -3 feature/v2`). + +--range-diff=<previous>:: + As a reviewer aid, insert a range-diff (see linkgit:git-range-diff[1]) + into the cover letter, or as commentary of the lone patch of a + 1-patch series, showing the differences between the previous + version of the patch series and the series currently being formatted. + `previous` can be a single revision naming the tip of the previous + series if it shares a common base with the series being formatted (for + example `git format-patch --cover-letter --range-diff=feature/v1 -3 + feature/v2`), or a revision range if the two versions of the series are + disjoint (for example `git format-patch --cover-letter + --range-diff=feature/v1~3..feature/v1 -3 feature/v2`). ++ +Note that diff options passed to the command affect how the primary +product of `format-patch` is generated, and they are not passed to +the underlying `range-diff` machinery used to generate the cover-letter +material (this may change in the future). + +--creation-factor=<percent>:: + Used with `--range-diff`, tweak the heuristic which matches up commits + between the previous and current series of patches by adjusting the + creation/deletion cost fudge factor. See linkgit:git-range-diff[1]) + for details. + +--notes[=<ref>]:: +--no-notes:: + Append the notes (see linkgit:git-notes[1]) for the commit + after the three-dash line. ++ +The expected use case of this is to write supporting explanation for +the commit that does not belong to the commit log message proper, +and include it with the patch submission. While one can simply write +these explanations after `format-patch` has run but before sending, +keeping them as Git notes allows them to be maintained between versions +of the patch series (but see the discussion of the `notes.rewrite` +configuration options in linkgit:git-notes[1] to use this workflow). ++ +The default is `--no-notes`, unless the `format.notes` configuration is +set. + +--[no-]signature=<signature>:: + Add a signature to each message produced. Per RFC 3676 the signature + is separated from the body by a line with '-- ' on it. If the + signature option is omitted the signature defaults to the Git version + number. + +--signature-file=<file>:: + Works just like --signature except the signature is read from a file. + +--suffix=.<sfx>:: + Instead of using `.patch` as the suffix for generated + filenames, use specified suffix. A common alternative is + `--suffix=.txt`. Leaving this empty will remove the `.patch` + suffix. ++ +Note that the leading character does not have to be a dot; for example, +you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. + +-q:: +--quiet:: + Do not print the names of the generated files to standard output. + +--no-binary:: + Do not output contents of changes in binary files, instead + display a notice that those files changed. Patches generated + using this option cannot be applied properly, but they are + still useful for code review. + +--zero-commit:: + Output an all-zero hash in each patch's From header instead + of the hash of the commit. + +--[no-]base[=<commit>]:: + Record the base tree information to identify the state the + patch series applies to. See the BASE TREE INFORMATION section + below for details. If <commit> is "auto", a base commit is + automatically chosen. The `--no-base` option overrides a + `format.useAutoBase` configuration. + +--root:: + Treat the revision argument as a <revision range>, even if it + is just a single commit (that would normally be treated as a + <since>). Note that root commits included in the specified + range are always formatted as creation patches, independently + of this flag. + +--progress:: + Show progress reports on stderr as patches are generated. + +CONFIGURATION +------------- +You can specify extra mail header lines to be added to each message, +defaults for the subject prefix and file suffix, number patches when +outputting more than one patch, add "To:" or "Cc:" headers, configure +attachments, change the patch output directory, and sign off patches +with configuration variables. + +------------ +[format] + headers = "Organization: git-foo\n" + subjectPrefix = CHANGE + suffix = .txt + numbered = auto + to = <email> + cc = <email> + attach [ = mime-boundary-string ] + signOff = true + outputDirectory = <directory> + coverLetter = auto + coverFromDescription = auto +------------ + + +DISCUSSION +---------- + +The patch produced by 'git format-patch' is in UNIX mailbox format, +with a fixed "magic" time stamp to indicate that the file is output +from format-patch rather than a real mailbox, like so: + +------------ +From 8f72bad1baf19a53459661343e21d6491c3908d3 Mon Sep 17 00:00:00 2001 +From: Tony Luck <tony.luck@intel.com> +Date: Tue, 13 Jul 2010 11:42:54 -0700 +Subject: [PATCH] =?UTF-8?q?[IA64]=20Put=20ia64=20config=20files=20on=20the=20?= + =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig=20diet?= +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +arch/arm config files were slimmed down using a python script +(See commit c2330e286f68f1c408b4aa6515ba49d57f05beae comment) + +Do the same for ia64 so we can have sleek & trim looking +... +------------ + +Typically it will be placed in a MUA's drafts folder, edited to add +timely commentary that should not go in the changelog after the three +dashes, and then sent as a message whose body, in our example, starts +with "arch/arm config files were...". On the receiving end, readers +can save interesting patches in a UNIX mailbox and apply them with +linkgit:git-am[1]. + +When a patch is part of an ongoing discussion, the patch generated by +'git format-patch' can be tweaked to take advantage of the 'git am +--scissors' feature. After your response to the discussion comes a +line that consists solely of "`-- >8 --`" (scissors and perforation), +followed by the patch with unnecessary header fields removed: + +------------ +... +> So we should do such-and-such. + +Makes sense to me. How about this patch? + +-- >8 -- +Subject: [IA64] Put ia64 config files on the Uwe Kleine-König diet + +arch/arm config files were slimmed down using a python script +... +------------ + +When sending a patch this way, most often you are sending your own +patch, so in addition to the "`From $SHA1 $magic_timestamp`" marker you +should omit `From:` and `Date:` lines from the patch file. The patch +title is likely to be different from the subject of the discussion the +patch is in response to, so it is likely that you would want to keep +the Subject: line, like the example above. + +Checking for patch corruption +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Many mailers if not set up properly will corrupt whitespace. Here are +two common types of corruption: + +* Empty context lines that do not have _any_ whitespace. + +* Non-empty context lines that have one extra whitespace at the + beginning. + +One way to test if your MUA is set up correctly is: + +* Send the patch to yourself, exactly the way you would, except + with To: and Cc: lines that do not contain the list and + maintainer address. + +* Save that patch to a file in UNIX mailbox format. Call it a.patch, + say. + +* Apply it: + + $ git fetch <project> master:test-apply + $ git switch test-apply + $ git restore --source=HEAD --staged --worktree :/ + $ git am a.patch + +If it does not apply correctly, there can be various reasons. + +* The patch itself does not apply cleanly. That is _bad_ but + does not have much to do with your MUA. You might want to rebase + the patch with linkgit:git-rebase[1] before regenerating it in + this case. + +* The MUA corrupted your patch; "am" would complain that + the patch does not apply. Look in the .git/rebase-apply/ subdirectory and + see what 'patch' file contains and check for the common + corruption patterns mentioned above. + +* While at it, check the 'info' and 'final-commit' files as well. + If what is in 'final-commit' is not exactly what you would want to + see in the commit log message, it is very likely that the + receiver would end up hand editing the log message when applying + your patch. Things like "Hi, this is my first patch.\n" in the + patch e-mail should come after the three-dash line that signals + the end of the commit message. + +MUA-SPECIFIC HINTS +------------------ +Here are some hints on how to successfully submit patches inline using +various mailers. + +GMail +~~~~~ +GMail does not have any way to turn off line wrapping in the web +interface, so it will mangle any emails that you send. You can however +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward +the emails through that. + +For hints on using 'git send-email' to send your patches through the +GMail SMTP server, see the EXAMPLE section of linkgit:git-send-email[1]. + +For hints on submission using the IMAP interface, see the EXAMPLE +section of linkgit:git-imap-send[1]. + +Thunderbird +~~~~~~~~~~~ +By default, Thunderbird will both wrap emails as well as flag +them as being 'format=flowed', both of which will make the +resulting email unusable by Git. + +There are three different approaches: use an add-on to turn off line wraps, +configure Thunderbird to not mangle patches, or use +an external editor to keep Thunderbird from mangling the patches. + +Approach #1 (add-on) +^^^^^^^^^^^^^^^^^^^^ + +Install the Toggle Word Wrap add-on that is available from +https://addons.mozilla.org/thunderbird/addon/toggle-word-wrap/ +It adds a menu entry "Enable Word Wrap" in the composer's "Options" menu +that you can tick off. Now you can compose the message as you otherwise do +(cut + paste, 'git format-patch' | 'git imap-send', etc), but you have to +insert line breaks manually in any text that you type. + +Approach #2 (configuration) +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Three steps: + +1. Configure your mail server composition as plain text: + Edit...Account Settings...Composition & Addressing, + uncheck "Compose Messages in HTML". + +2. Configure your general composition window to not wrap. ++ +In Thunderbird 2: +Edit..Preferences..Composition, wrap plain text messages at 0 ++ +In Thunderbird 3: +Edit..Preferences..Advanced..Config Editor. Search for +"mail.wrap_long_lines". +Toggle it to make sure it is set to `false`. Also, search for +"mailnews.wraplength" and set the value to 0. + +3. Disable the use of format=flowed: + Edit..Preferences..Advanced..Config Editor. Search for + "mailnews.send_plaintext_flowed". + Toggle it to make sure it is set to `false`. + +After that is done, you should be able to compose email as you +otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc), +and the patches will not be mangled. + +Approach #3 (external editor) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The following Thunderbird extensions are needed: +AboutConfig from http://aboutconfig.mozdev.org/ and +External Editor from http://globs.org/articles.php?lng=en&pg=8 + +1. Prepare the patch as a text file using your method of choice. + +2. Before opening a compose window, use Edit->Account Settings to + uncheck the "Compose messages in HTML format" setting in the + "Composition & Addressing" panel of the account to be used to + send the patch. + +3. In the main Thunderbird window, 'before' you open the compose + window for the patch, use Tools->about:config to set the + following to the indicated values: ++ +---------- + mailnews.send_plaintext_flowed => false + mailnews.wraplength => 0 +---------- + +4. Open a compose window and click the external editor icon. + +5. In the external editor window, read in the patch file and exit + the editor normally. + +Side note: it may be possible to do step 2 with +about:config and the following settings but no one's tried yet. + +---------- + mail.html_compose => false + mail.identity.default.compose_html => false + mail.identity.id?.compose_html => false +---------- + +There is a script in contrib/thunderbird-patch-inline which can help +you include patches with Thunderbird in an easy way. To use it, do the +steps above and then use the script as the external editor. + +KMail +~~~~~ +This should help you to submit patches inline using KMail. + +1. Prepare the patch as a text file. + +2. Click on New Mail. + +3. Go under "Options" in the Composer window and be sure that + "Word wrap" is not set. + +4. Use Message -> Insert file... and insert the patch. + +5. Back in the compose window: add whatever other text you wish to the + message, complete the addressing and subject fields, and press send. + +BASE TREE INFORMATION +--------------------- + +The base tree information block is used for maintainers or third party +testers to know the exact state the patch series applies to. It consists +of the 'base commit', which is a well-known commit that is part of the +stable part of the project history everybody else works off of, and zero +or more 'prerequisite patches', which are well-known patches in flight +that is not yet part of the 'base commit' that need to be applied on top +of 'base commit' in topological order before the patches can be applied. + +The 'base commit' is shown as "base-commit: " followed by the 40-hex of +the commit object name. A 'prerequisite patch' is shown as +"prerequisite-patch-id: " followed by the 40-hex 'patch id', which can +be obtained by passing the patch through the `git patch-id --stable` +command. + +Imagine that on top of the public commit P, you applied well-known +patches X, Y and Z from somebody else, and then built your three-patch +series A, B, C, the history would be like: + +................................................ +---P---X---Y---Z---A---B---C +................................................ + +With `git format-patch --base=P -3 C` (or variants thereof, e.g. with +`--cover-letter` or using `Z..C` instead of `-3 C` to specify the +range), the base tree information block is shown at the end of the +first message the command outputs (either the first patch, or the +cover letter), like this: + +------------ +base-commit: P +prerequisite-patch-id: X +prerequisite-patch-id: Y +prerequisite-patch-id: Z +------------ + +For non-linear topology, such as + +................................................ +---P---X---A---M---C + \ / + Y---Z---B +................................................ + +You can also use `git format-patch --base=P -3 C` to generate patches +for A, B and C, and the identifiers for P, X, Y, Z are appended at the +end of the first message. + +If set `--base=auto` in cmdline, it will automatically compute +the base commit as the merge base of tip commit of the remote-tracking +branch and revision-range specified in cmdline. +For a local branch, you need to make it to track a remote branch by `git branch +--set-upstream-to` before using this option. + +EXAMPLES +-------- + +* Extract commits between revisions R1 and R2, and apply them on top of + the current branch using 'git am' to cherry-pick them: ++ +------------ +$ git format-patch -k --stdout R1..R2 | git am -3 -k +------------ + +* Extract all commits which are in the current branch but not in the + origin branch: ++ +------------ +$ git format-patch origin +------------ ++ +For each commit a separate file is created in the current directory. + +* Extract all commits that lead to 'origin' since the inception of the + project: ++ +------------ +$ git format-patch --root origin +------------ + +* The same as the previous one: ++ +------------ +$ git format-patch -M -B origin +------------ ++ +Additionally, it detects and handles renames and complete rewrites +intelligently to produce a renaming patch. A renaming patch reduces +the amount of text output, and generally makes it easier to review. +Note that non-Git "patch" programs won't understand renaming patches, so +use it only when you know the recipient uses Git to apply your patch. + +* Extract three topmost commits from the current branch and format them + as e-mailable patches: ++ +------------ +$ git format-patch -3 +------------ + +CAVEATS +------- + +Note that `format-patch` will omit merge commits from the output, even +if they are part of the requested range. A simple "patch" does not +include enough information for the receiving end to reproduce the same +merge commit. + +SEE ALSO +-------- +linkgit:git-am[1], linkgit:git-send-email[1] + +GIT +--- +Part of the linkgit:git[1] suite |