diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/technical/api-trace2.txt | 1339 |
1 files changed, 1339 insertions, 0 deletions
diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt new file mode 100644 index 0000000..de5fc25 --- /dev/null +++ b/Documentation/technical/api-trace2.txt @@ -0,0 +1,1339 @@ += Trace2 API + +The Trace2 API can be used to print debug, performance, and telemetry +information to stderr or a file. The Trace2 feature is inactive unless +explicitly enabled by enabling one or more Trace2 Targets. + +The Trace2 API is intended to replace the existing (Trace1) +`printf()`-style tracing provided by the existing `GIT_TRACE` and +`GIT_TRACE_PERFORMANCE` facilities. During initial implementation, +Trace2 and Trace1 may operate in parallel. + +The Trace2 API defines a set of high-level messages with known fields, +such as (`start`: `argv`) and (`exit`: {`exit-code`, `elapsed-time`}). + +Trace2 instrumentation throughout the Git code base sends Trace2 +messages to the enabled Trace2 Targets. Targets transform these +messages content into purpose-specific formats and write events to +their data streams. In this manner, the Trace2 API can drive +many different types of analysis. + +Targets are defined using a VTable allowing easy extension to other +formats in the future. This might be used to define a binary format, +for example. + +Trace2 is controlled using `trace2.*` config values in the system and +global config files and `GIT_TRACE2*` environment variables. Trace2 does +not read from repo local or worktree config files, nor does it respect +`-c` command line config settings. + +== Trace2 Targets + +Trace2 defines the following set of Trace2 Targets. +Format details are given in a later section. + +=== The Normal Format Target + +The normal format target is a traditional `printf()` format and similar +to the `GIT_TRACE` format. This format is enabled with the `GIT_TRACE2` +environment variable or the `trace2.normalTarget` system or global +config setting. + +For example + +------------ +$ export GIT_TRACE2=~/log.normal +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +or + +------------ +$ git config --global trace2.normalTarget ~/log.normal +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +yields + +------------ +$ cat ~/log.normal +12:28:42.620009 common-main.c:38 version 2.20.1.155.g426c96fcdb +12:28:42.620989 common-main.c:39 start git version +12:28:42.621101 git.c:432 cmd_name version (version) +12:28:42.621215 git.c:662 exit elapsed:0.001227 code:0 +12:28:42.621250 trace2/tr2_tgt_normal.c:124 atexit elapsed:0.001265 code:0 +------------ + +=== The Performance Format Target + +The performance format target (PERF) is a column-based format to +replace `GIT_TRACE_PERFORMANCE` and is suitable for development and +testing, possibly to complement tools like `gprof`. This format is +enabled with the `GIT_TRACE2_PERF` environment variable or the +`trace2.perfTarget` system or global config setting. + +For example + +------------ +$ export GIT_TRACE2_PERF=~/log.perf +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +or + +------------ +$ git config --global trace2.perfTarget ~/log.perf +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +yields + +------------ +$ cat ~/log.perf +12:28:42.620675 common-main.c:38 | d0 | main | version | | | | | 2.20.1.155.g426c96fcdb +12:28:42.621001 common-main.c:39 | d0 | main | start | | 0.001173 | | | git version +12:28:42.621111 git.c:432 | d0 | main | cmd_name | | | | | version (version) +12:28:42.621225 git.c:662 | d0 | main | exit | | 0.001227 | | | code:0 +12:28:42.621259 trace2/tr2_tgt_perf.c:211 | d0 | main | atexit | | 0.001265 | | | code:0 +------------ + +=== The Event Format Target + +The event format target is a JSON-based format of event data suitable +for telemetry analysis. This format is enabled with the `GIT_TRACE2_EVENT` +environment variable or the `trace2.eventTarget` system or global config +setting. + +For example + +------------ +$ export GIT_TRACE2_EVENT=~/log.event +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +or + +------------ +$ git config --global trace2.eventTarget ~/log.event +$ git version +git version 2.20.1.155.g426c96fcdb +------------ + +yields + +------------ +$ cat ~/log.event +{"event":"version","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.620713Z","file":"common-main.c","line":38,"evt":"3","exe":"2.20.1.155.g426c96fcdb"} +{"event":"start","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621027Z","file":"common-main.c","line":39,"t_abs":0.001173,"argv":["git","version"]} +{"event":"cmd_name","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621122Z","file":"git.c","line":432,"name":"version","hierarchy":"version"} +{"event":"exit","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621236Z","file":"git.c","line":662,"t_abs":0.001227,"code":0} +{"event":"atexit","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621268Z","file":"trace2/tr2_tgt_event.c","line":163,"t_abs":0.001265,"code":0} +------------ + +=== Enabling a Target + +To enable a target, set the corresponding environment variable or +system or global config value to one of the following: + +include::../trace2-target-values.txt[] + +When trace files are written to a target directory, they will be named according +to the last component of the SID (optionally followed by a counter to avoid +filename collisions). + +== Trace2 API + +The Trace2 public API is defined and documented in `trace2.h`; refer to it for +more information. All public functions and macros are prefixed +with `trace2_` and are implemented in `trace2.c`. + +There are no public Trace2 data structures. + +The Trace2 code also defines a set of private functions and data types +in the `trace2/` directory. These symbols are prefixed with `tr2_` +and should only be used by functions in `trace2.c` (or other private +source files in `trace2/`). + +=== Conventions for Public Functions and Macros + +Some functions have a `_fl()` suffix to indicate that they take `file` +and `line-number` arguments. + +Some functions have a `_va_fl()` suffix to indicate that they also +take a `va_list` argument. + +Some functions have a `_printf_fl()` suffix to indicate that they also +take a `printf()` style format with a variable number of arguments. + +CPP wrapper macros are defined to hide most of these details. + +== Trace2 Target Formats + +=== NORMAL Format + +Events are written as lines of the form: + +------------ +[<time> SP <filename>:<line> SP+] <event-name> [[SP] <event-message>] LF +------------ + +`<event-name>`:: + + is the event name. + +`<event-message>`:: + is a free-form `printf()` message intended for human consumption. ++ +Note that this may contain embedded LF or CRLF characters that are +not escaped, so the event may spill across multiple lines. + +If `GIT_TRACE2_BRIEF` or `trace2.normalBrief` is true, the `time`, `filename`, +and `line` fields are omitted. + +This target is intended to be more of a summary (like GIT_TRACE) and +less detailed than the other targets. It ignores thread, region, and +data messages, for example. + +=== PERF Format + +Events are written as lines of the form: + +------------ +[<time> SP <filename>:<line> SP+ + BAR SP] d<depth> SP + BAR SP <thread-name> SP+ + BAR SP <event-name> SP+ + BAR SP [r<repo-id>] SP+ + BAR SP [<t_abs>] SP+ + BAR SP [<t_rel>] SP+ + BAR SP [<category>] SP+ + BAR SP DOTS* <perf-event-message> + LF +------------ + +`<depth>`:: + is the git process depth. This is the number of parent + git processes. A top-level git command has depth value "d0". + A child of it has depth value "d1". A second level child + has depth value "d2" and so on. + +`<thread-name>`:: + is a unique name for the thread. The primary thread + is called "main". Other thread names are of the form "th%d:%s" + and include a unique number and the name of the thread-proc. + +`<event-name>`:: + is the event name. + +`<repo-id>`:: + when present, is a number indicating the repository + in use. A `def_repo` event is emitted when a repository is + opened. This defines the repo-id and associated worktree. + Subsequent repo-specific events will reference this repo-id. ++ +Currently, this is always "r1" for the main repository. +This field is in anticipation of in-proc submodules in the future. + +`<t_abs>`:: + when present, is the absolute time in seconds since the + program started. + +`<t_rel>`:: + when present, is time in seconds relative to the start of + the current region. For a thread-exit event, it is the elapsed + time of the thread. + +`<category>`:: + is present on region and data events and is used to + indicate a broad category, such as "index" or "status". + +`<perf-event-message>`:: + is a free-form `printf()` message intended for human consumption. + +------------ +15:33:33.532712 wt-status.c:2310 | d0 | main | region_enter | r1 | 0.126064 | | status | label:print +15:33:33.532712 wt-status.c:2331 | d0 | main | region_leave | r1 | 0.127568 | 0.001504 | status | label:print +------------ + +If `GIT_TRACE2_PERF_BRIEF` or `trace2.perfBrief` is true, the `time`, `file`, +and `line` fields are omitted. + +------------ +d0 | main | region_leave | r1 | 0.011717 | 0.009122 | index | label:preload +------------ + +The PERF target is intended for interactive performance analysis +during development and is quite noisy. + +=== EVENT Format + +Each event is a JSON-object containing multiple key/value pairs +written as a single line and followed by a LF. + +------------ +'{' <key> ':' <value> [',' <key> ':' <value>]* '}' LF +------------ + +Some key/value pairs are common to all events and some are +event-specific. + +==== Common Key/Value Pairs + +The following key/value pairs are common to all events: + +------------ +{ + "event":"version", + "sid":"20190408T191827.272759Z-H9b68c35f-P00003510", + "thread":"main", + "time":"2019-04-08T19:18:27.282761Z", + "file":"common-main.c", + "line":42, + ... +} +------------ + +`"event":<event>`:: + is the event name. + +`"sid":<sid>`:: + is the session-id. This is a unique string to identify the + process instance to allow all events emitted by a process to + be identified. A session-id is used instead of a PID because + PIDs are recycled by the OS. For child git processes, the + session-id is prepended with the session-id of the parent git + process to allow parent-child relationships to be identified + during post-processing. + +`"thread":<thread>`:: + is the thread name. + +`"time":<time>`:: + is the UTC time of the event. + +`"file":<filename>`:: + is source file generating the event. + +`"line":<line-number>`:: + is the integer source line number generating the event. + +`"repo":<repo-id>`:: + when present, is the integer repo-id as described previously. + +If `GIT_TRACE2_EVENT_BRIEF` or `trace2.eventBrief` is true, the `file` +and `line` fields are omitted from all events and the `time` field is +only present on the "start" and "atexit" events. + +==== Event-Specific Key/Value Pairs + +`"version"`:: + This event gives the version of the executable and the EVENT format. It + should always be the first event in a trace session. The EVENT format + version will be incremented if new event types are added, if existing + fields are removed, or if there are significant changes in + interpretation of existing events or fields. Smaller changes, such as + adding a new field to an existing event, will not require an increment + to the EVENT format version. ++ +------------ +{ + "event":"version", + ... + "evt":"3", # EVENT format version + "exe":"2.20.1.155.g426c96fcdb" # git version +} +------------ + +`"too_many_files"`:: + This event is written to the git-trace2-discard sentinel file if there + are too many files in the target trace directory (see the + trace2.maxFiles config option). ++ +------------ +{ + "event":"too_many_files", + ... +} +------------ + +`"start"`:: + This event contains the complete argv received by main(). ++ +------------ +{ + "event":"start", + ... + "t_abs":0.001227, # elapsed time in seconds + "argv":["git","version"] +} +------------ + +`"exit"`:: + This event is emitted when git calls `exit()`. ++ +------------ +{ + "event":"exit", + ... + "t_abs":0.001227, # elapsed time in seconds + "code":0 # exit code +} +------------ + +`"atexit"`:: + This event is emitted by the Trace2 `atexit` routine during + final shutdown. It should be the last event emitted by the + process. ++ +(The elapsed time reported here is greater than the time reported in +the "exit" event because it runs after all other atexit tasks have +completed.) ++ +------------ +{ + "event":"atexit", + ... + "t_abs":0.001227, # elapsed time in seconds + "code":0 # exit code +} +------------ + +`"signal"`:: + This event is emitted when the program is terminated by a user + signal. Depending on the platform, the signal event may + prevent the "atexit" event from being generated. ++ +------------ +{ + "event":"signal", + ... + "t_abs":0.001227, # elapsed time in seconds + "signo":13 # SIGTERM, SIGINT, etc. +} +------------ + +`"error"`:: + This event is emitted when one of the `BUG()`, `bug()`, `error()`, + `die()`, `warning()`, or `usage()` functions are called. ++ +------------ +{ + "event":"error", + ... + "msg":"invalid option: --cahced", # formatted error message + "fmt":"invalid option: %s" # error format string +} +------------ ++ +The error event may be emitted more than once. The format string +allows post-processors to group errors by type without worrying +about specific error arguments. + +`"cmd_path"`:: + This event contains the discovered full path of the git + executable (on platforms that are configured to resolve it). ++ +------------ +{ + "event":"cmd_path", + ... + "path":"C:/work/gfw/git.exe" +} +------------ + +`"cmd_ancestry"`:: + This event contains the text command name for the parent (and earlier + generations of parents) of the current process, in an array ordered from + nearest parent to furthest great-grandparent. It may not be implemented + on all platforms. ++ +------------ +{ + "event":"cmd_ancestry", + ... + "ancestry":["bash","tmux: server","systemd"] +} +------------ + +`"cmd_name"`:: + This event contains the command name for this git process + and the hierarchy of commands from parent git processes. ++ +------------ +{ + "event":"cmd_name", + ... + "name":"pack-objects", + "hierarchy":"push/pack-objects" +} +------------ ++ +Normally, the "name" field contains the canonical name of the +command. When a canonical name is not available, one of +these special values are used: ++ +------------ +"_query_" # "git --html-path" +"_run_dashed_" # when "git foo" tries to run "git-foo" +"_run_shell_alias_" # alias expansion to a shell command +"_run_git_alias_" # alias expansion to a git command +"_usage_" # usage error +------------ + +`"cmd_mode"`:: + This event, when present, describes the command variant. This + event may be emitted more than once. ++ +------------ +{ + "event":"cmd_mode", + ... + "name":"branch" +} +------------ ++ +The "name" field is an arbitrary string to describe the command mode. +For example, checkout can checkout a branch or an individual file. +And these variations typically have different performance +characteristics that are not comparable. + +`"alias"`:: + This event is present when an alias is expanded. ++ +------------ +{ + "event":"alias", + ... + "alias":"l", # registered alias + "argv":["log","--graph"] # alias expansion +} +------------ + +`"child_start"`:: + This event describes a child process that is about to be + spawned. ++ +------------ +{ + "event":"child_start", + ... + "child_id":2, + "child_class":"?", + "use_shell":false, + "argv":["git","rev-list","--objects","--stdin","--not","--all","--quiet"] + + "hook_name":"<hook_name>" # present when child_class is "hook" + "cd":"<path>" # present when cd is required +} +------------ ++ +The "child_id" field can be used to match this child_start with the +corresponding child_exit event. ++ +The "child_class" field is a rough classification, such as "editor", +"pager", "transport/*", and "hook". Unclassified children are classified +with "?". + +`"child_exit"`:: + This event is generated after the current process has returned + from the `waitpid()` and collected the exit information from the + child. ++ +------------ +{ + "event":"child_exit", + ... + "child_id":2, + "pid":14708, # child PID + "code":0, # child exit-code + "t_rel":0.110605 # observed run-time of child process +} +------------ ++ +Note that the session-id of the child process is not available to +the current/spawning process, so the child's PID is reported here as +a hint for post-processing. (But it is only a hint because the child +process may be a shell script which doesn't have a session-id.) ++ +Note that the `t_rel` field contains the observed run time in seconds +for the child process (starting before the fork/exec/spawn and +stopping after the `waitpid()` and includes OS process creation overhead). +So this time will be slightly larger than the atexit time reported by +the child process itself. + +`"child_ready"`:: + This event is generated after the current process has started + a background process and released all handles to it. ++ +------------ +{ + "event":"child_ready", + ... + "child_id":2, + "pid":14708, # child PID + "ready":"ready", # child ready state + "t_rel":0.110605 # observed run-time of child process +} +------------ ++ +Note that the session-id of the child process is not available to +the current/spawning process, so the child's PID is reported here as +a hint for post-processing. (But it is only a hint because the child +process may be a shell script which doesn't have a session-id.) ++ +This event is generated after the child is started in the background +and given a little time to boot up and start working. If the child +starts up normally while the parent is still waiting, the "ready" +field will have the value "ready". +If the child is too slow to start and the parent times out, the field +will have the value "timeout". +If the child starts but the parent is unable to probe it, the field +will have the value "error". ++ +After the parent process emits this event, it will release all of its +handles to the child process and treat the child as a background +daemon. So even if the child does eventually finish booting up, +the parent will not emit an updated event. ++ +Note that the `t_rel` field contains the observed run time in seconds +when the parent released the child process into the background. +The child is assumed to be a long-running daemon process and may +outlive the parent process. So the parent's child event times should +not be compared to the child's atexit times. + +`"exec"`:: + This event is generated before git attempts to `exec()` + another command rather than starting a child process. ++ +------------ +{ + "event":"exec", + ... + "exec_id":0, + "exe":"git", + "argv":["foo", "bar"] +} +------------ ++ +The "exec_id" field is a command-unique id and is only useful if the +`exec()` fails and a corresponding exec_result event is generated. + +`"exec_result"`:: + This event is generated if the `exec()` fails and control + returns to the current git command. ++ +------------ +{ + "event":"exec_result", + ... + "exec_id":0, + "code":1 # error code (errno) from exec() +} +------------ + +`"thread_start"`:: + This event is generated when a thread is started. It is + generated from *within* the new thread's thread-proc (because + it needs to access data in the thread's thread-local storage). ++ +------------ +{ + "event":"thread_start", + ... + "thread":"th02:preload_thread" # thread name +} +------------ + +`"thread_exit"`:: + This event is generated when a thread exits. It is generated + from *within* the thread's thread-proc. ++ +------------ +{ + "event":"thread_exit", + ... + "thread":"th02:preload_thread", # thread name + "t_rel":0.007328 # thread elapsed time +} +------------ + +`"def_param"`:: + This event is generated to log a global parameter, such as a config + setting, command-line flag, or environment variable. ++ +------------ +{ + "event":"def_param", + ... + "scope":"global", + "param":"core.abbrev", + "value":"7" +} +------------ + +`"def_repo"`:: + This event defines a repo-id and associates it with the root + of the worktree. ++ +------------ +{ + "event":"def_repo", + ... + "repo":1, + "worktree":"/Users/jeffhost/work/gfw" +} +------------ ++ +As stated earlier, the repo-id is currently always 1, so there will +only be one def_repo event. Later, if in-proc submodules are +supported, a def_repo event should be emitted for each submodule +visited. + +`"region_enter"`:: + This event is generated when entering a region. ++ +------------ +{ + "event":"region_enter", + ... + "repo":1, # optional + "nesting":1, # current region stack depth + "category":"index", # optional + "label":"do_read_index", # optional + "msg":".git/index" # optional +} +------------ ++ +The `category` field may be used in a future enhancement to +do category-based filtering. ++ +`GIT_TRACE2_EVENT_NESTING` or `trace2.eventNesting` can be used to +filter deeply nested regions and data events. It defaults to "2". + +`"region_leave"`:: + This event is generated when leaving a region. ++ +------------ +{ + "event":"region_leave", + ... + "repo":1, # optional + "t_rel":0.002876, # time spent in region in seconds + "nesting":1, # region stack depth + "category":"index", # optional + "label":"do_read_index", # optional + "msg":".git/index" # optional +} +------------ + +`"data"`:: + This event is generated to log a thread- and region-local + key/value pair. ++ +------------ +{ + "event":"data", + ... + "repo":1, # optional + "t_abs":0.024107, # absolute elapsed time + "t_rel":0.001031, # elapsed time in region/thread + "nesting":2, # region stack depth + "category":"index", + "key":"read/cache_nr", + "value":"3552" +} +------------ ++ +The "value" field may be an integer or a string. + +`"data-json"`:: + This event is generated to log a pre-formatted JSON string + containing structured data. ++ +------------ +{ + "event":"data_json", + ... + "repo":1, # optional + "t_abs":0.015905, + "t_rel":0.015905, + "nesting":1, + "category":"process", + "key":"windows/ancestry", + "value":["bash.exe","bash.exe"] +} +------------ + +`"th_timer"`:: + This event logs the amount of time that a stopwatch timer was + running in the thread. This event is generated when a thread + exits for timers that requested per-thread events. ++ +------------ +{ + "event":"th_timer", + ... + "category":"my_category", + "name":"my_timer", + "intervals":5, # number of time it was started/stopped + "t_total":0.052741, # total time in seconds it was running + "t_min":0.010061, # shortest interval + "t_max":0.011648 # longest interval +} +------------ + +`"timer"`:: + This event logs the amount of time that a stopwatch timer was + running aggregated across all threads. This event is generated + when the process exits. ++ +------------ +{ + "event":"timer", + ... + "category":"my_category", + "name":"my_timer", + "intervals":5, # number of time it was started/stopped + "t_total":0.052741, # total time in seconds it was running + "t_min":0.010061, # shortest interval + "t_max":0.011648 # longest interval +} +------------ + +`"th_counter"`:: + This event logs the value of a counter variable in a thread. + This event is generated when a thread exits for counters that + requested per-thread events. ++ +------------ +{ + "event":"th_counter", + ... + "category":"my_category", + "name":"my_counter", + "count":23 +} +------------ + +`"counter"`:: + This event logs the value of a counter variable across all threads. + This event is generated when the process exits. The total value + reported here is the sum across all threads. ++ +------------ +{ + "event":"counter", + ... + "category":"my_category", + "name":"my_counter", + "count":23 +} +------------ + + +== Example Trace2 API Usage + +Here is a hypothetical usage of the Trace2 API showing the intended +usage (without worrying about the actual Git details). + +Initialization:: + + Initialization happens in `main()`. Behind the scenes, an + `atexit` and `signal` handler are registered. ++ +---------------- +int main(int argc, const char **argv) +{ + int exit_code; + + trace2_initialize(); + trace2_cmd_start(argv); + + exit_code = cmd_main(argc, argv); + + trace2_cmd_exit(exit_code); + + return exit_code; +} +---------------- + +Command Details:: + + After the basics are established, additional command + information can be sent to Trace2 as it is discovered. ++ +---------------- +int cmd_checkout(int argc, const char **argv) +{ + trace2_cmd_name("checkout"); + trace2_cmd_mode("branch"); + trace2_def_repo(the_repository); + + // emit "def_param" messages for "interesting" config settings. + trace2_cmd_list_config(); + + if (do_something()) + trace2_cmd_error("Path '%s': cannot do something", path); + + return 0; +} +---------------- + +Child Processes:: + + Wrap code spawning child processes. ++ +---------------- +void run_child(...) +{ + int child_exit_code; + struct child_process cmd = CHILD_PROCESS_INIT; + ... + cmd.trace2_child_class = "editor"; + + trace2_child_start(&cmd); + child_exit_code = spawn_child_and_wait_for_it(); + trace2_child_exit(&cmd, child_exit_code); +} +---------------- ++ +For example, the following fetch command spawned ssh, index-pack, +rev-list, and gc. This example also shows that fetch took +5.199 seconds and of that 4.932 was in ssh. ++ +---------------- +$ export GIT_TRACE2_BRIEF=1 +$ export GIT_TRACE2=~/log.normal +$ git fetch origin +... +---------------- ++ +---------------- +$ cat ~/log.normal +version 2.20.1.vfs.1.1.47.g534dbe1ad1 +start git fetch origin +worktree /Users/jeffhost/work/gfw +cmd_name fetch (fetch) +child_start[0] ssh git@github.com ... +child_start[1] git index-pack ... +... (Trace2 events from child processes omitted) +child_exit[1] pid:14707 code:0 elapsed:0.076353 +child_exit[0] pid:14706 code:0 elapsed:4.931869 +child_start[2] git rev-list ... +... (Trace2 events from child process omitted) +child_exit[2] pid:14708 code:0 elapsed:0.110605 +child_start[3] git gc --auto +... (Trace2 events from child process omitted) +child_exit[3] pid:14709 code:0 elapsed:0.006240 +exit elapsed:5.198503 code:0 +atexit elapsed:5.198541 code:0 +---------------- ++ +When a git process is a (direct or indirect) child of another +git process, it inherits Trace2 context information. This +allows the child to print the command hierarchy. This example +shows gc as child[3] of fetch. When the gc process reports +its name as "gc", it also reports the hierarchy as "fetch/gc". +(In this example, trace2 messages from the child process is +indented for clarity.) ++ +---------------- +$ export GIT_TRACE2_BRIEF=1 +$ export GIT_TRACE2=~/log.normal +$ git fetch origin +... +---------------- ++ +---------------- +$ cat ~/log.normal +version 2.20.1.160.g5676107ecd.dirty +start git fetch official +worktree /Users/jeffhost/work/gfw +cmd_name fetch (fetch) +... +child_start[3] git gc --auto + version 2.20.1.160.g5676107ecd.dirty + start /Users/jeffhost/work/gfw/git gc --auto + worktree /Users/jeffhost/work/gfw + cmd_name gc (fetch/gc) + exit elapsed:0.001959 code:0 + atexit elapsed:0.001997 code:0 +child_exit[3] pid:20303 code:0 elapsed:0.007564 +exit elapsed:3.868938 code:0 +atexit elapsed:3.868970 code:0 +---------------- + +Regions:: + + Regions can be used to time an interesting section of code. ++ +---------------- +void wt_status_collect(struct wt_status *s) +{ + trace2_region_enter("status", "worktrees", s->repo); + wt_status_collect_changes_worktree(s); + trace2_region_leave("status", "worktrees", s->repo); + + trace2_region_enter("status", "index", s->repo); + wt_status_collect_changes_index(s); + trace2_region_leave("status", "index", s->repo); + + trace2_region_enter("status", "untracked", s->repo); + wt_status_collect_untracked(s); + trace2_region_leave("status", "untracked", s->repo); +} + +void wt_status_print(struct wt_status *s) +{ + trace2_region_enter("status", "print", s->repo); + switch (s->status_format) { + ... + } + trace2_region_leave("status", "print", s->repo); +} +---------------- ++ +In this example, scanning for untracked files ran from +0.012568 to ++0.027149 (since the process started) and took 0.014581 seconds. ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ git status +... + +$ cat ~/log.perf +d0 | main | version | | | | | 2.20.1.160.g5676107ecd.dirty +d0 | main | start | | 0.001173 | | | git status +d0 | main | def_repo | r1 | | | | worktree:/Users/jeffhost/work/gfw +d0 | main | cmd_name | | | | | status (status) +... +d0 | main | region_enter | r1 | 0.010988 | | status | label:worktrees +d0 | main | region_leave | r1 | 0.011236 | 0.000248 | status | label:worktrees +d0 | main | region_enter | r1 | 0.011260 | | status | label:index +d0 | main | region_leave | r1 | 0.012542 | 0.001282 | status | label:index +d0 | main | region_enter | r1 | 0.012568 | | status | label:untracked +d0 | main | region_leave | r1 | 0.027149 | 0.014581 | status | label:untracked +d0 | main | region_enter | r1 | 0.027411 | | status | label:print +d0 | main | region_leave | r1 | 0.028741 | 0.001330 | status | label:print +d0 | main | exit | | 0.028778 | | | code:0 +d0 | main | atexit | | 0.028809 | | | code:0 +---------------- ++ +Regions may be nested. This causes messages to be indented in the +PERF target, for example. +Elapsed times are relative to the start of the corresponding nesting +level as expected. For example, if we add region message to: ++ +---------------- +static enum path_treatment read_directory_recursive(struct dir_struct *dir, + struct index_state *istate, const char *base, int baselen, + struct untracked_cache_dir *untracked, int check_only, + int stop_at_first_file, const struct pathspec *pathspec) +{ + enum path_treatment state, subdir_state, dir_state = path_none; + + trace2_region_enter_printf("dir", "read_recursive", NULL, "%.*s", baselen, base); + ... + trace2_region_leave_printf("dir", "read_recursive", NULL, "%.*s", baselen, base); + return dir_state; +} +---------------- ++ +We can further investigate the time spent scanning for untracked files. ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ git status +... +$ cat ~/log.perf +d0 | main | version | | | | | 2.20.1.162.gb4ccea44db.dirty +d0 | main | start | | 0.001173 | | | git status +d0 | main | def_repo | r1 | | | | worktree:/Users/jeffhost/work/gfw +d0 | main | cmd_name | | | | | status (status) +... +d0 | main | region_enter | r1 | 0.015047 | | status | label:untracked +d0 | main | region_enter | | 0.015132 | | dir | ..label:read_recursive +d0 | main | region_enter | | 0.016341 | | dir | ....label:read_recursive vcs-svn/ +d0 | main | region_leave | | 0.016422 | 0.000081 | dir | ....label:read_recursive vcs-svn/ +d0 | main | region_enter | | 0.016446 | | dir | ....label:read_recursive xdiff/ +d0 | main | region_leave | | 0.016522 | 0.000076 | dir | ....label:read_recursive xdiff/ +d0 | main | region_enter | | 0.016612 | | dir | ....label:read_recursive git-gui/ +d0 | main | region_enter | | 0.016698 | | dir | ......label:read_recursive git-gui/po/ +d0 | main | region_enter | | 0.016810 | | dir | ........label:read_recursive git-gui/po/glossary/ +d0 | main | region_leave | | 0.016863 | 0.000053 | dir | ........label:read_recursive git-gui/po/glossary/ +... +d0 | main | region_enter | | 0.031876 | | dir | ....label:read_recursive builtin/ +d0 | main | region_leave | | 0.032270 | 0.000394 | dir | ....label:read_recursive builtin/ +d0 | main | region_leave | | 0.032414 | 0.017282 | dir | ..label:read_recursive +d0 | main | region_leave | r1 | 0.032454 | 0.017407 | status | label:untracked +... +d0 | main | exit | | 0.034279 | | | code:0 +d0 | main | atexit | | 0.034322 | | | code:0 +---------------- ++ +Trace2 regions are similar to the existing trace_performance_enter() +and trace_performance_leave() routines, but are thread safe and +maintain per-thread stacks of timers. + +Data Messages:: + + Data messages added to a region. ++ +---------------- +int read_index_from(struct index_state *istate, const char *path, + const char *gitdir) +{ + trace2_region_enter_printf("index", "do_read_index", the_repository, "%s", path); + + ... + + trace2_data_intmax("index", the_repository, "read/version", istate->version); + trace2_data_intmax("index", the_repository, "read/cache_nr", istate->cache_nr); + + trace2_region_leave_printf("index", "do_read_index", the_repository, "%s", path); +} +---------------- ++ +This example shows that the index contained 3552 entries. ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ git status +... +$ cat ~/log.perf +d0 | main | version | | | | | 2.20.1.156.gf9916ae094.dirty +d0 | main | start | | 0.001173 | | | git status +d0 | main | def_repo | r1 | | | | worktree:/Users/jeffhost/work/gfw +d0 | main | cmd_name | | | | | status (status) +d0 | main | region_enter | r1 | 0.001791 | | index | label:do_read_index .git/index +d0 | main | data | r1 | 0.002494 | 0.000703 | index | ..read/version:2 +d0 | main | data | r1 | 0.002520 | 0.000729 | index | ..read/cache_nr:3552 +d0 | main | region_leave | r1 | 0.002539 | 0.000748 | index | label:do_read_index .git/index +... +---------------- + +Thread Events:: + + Thread messages added to a thread-proc. ++ +For example, the multi-threaded preload-index code can be +instrumented with a region around the thread pool and then +per-thread start and exit events within the thread-proc. ++ +---------------- +static void *preload_thread(void *_data) +{ + // start the per-thread clock and emit a message. + trace2_thread_start("preload_thread"); + + // report which chunk of the array this thread was assigned. + trace2_data_intmax("index", the_repository, "offset", p->offset); + trace2_data_intmax("index", the_repository, "count", nr); + + do { + ... + } while (--nr > 0); + ... + + // report elapsed time taken by this thread. + trace2_thread_exit(); + return NULL; +} + +void preload_index(struct index_state *index, + const struct pathspec *pathspec, + unsigned int refresh_flags) +{ + trace2_region_enter("index", "preload", the_repository); + + for (i = 0; i < threads; i++) { + ... /* create thread */ + } + + for (i = 0; i < threads; i++) { + ... /* join thread */ + } + + trace2_region_leave("index", "preload", the_repository); +} +---------------- ++ +In this example preload_index() was executed by the `main` thread +and started the `preload` region. Seven threads, named +`th01:preload_thread` through `th07:preload_thread`, were started. +Events from each thread are atomically appended to the shared target +stream as they occur so they may appear in random order with respect +other threads. Finally, the main thread waits for the threads to +finish and leaves the region. ++ +Data events are tagged with the active thread name. They are used +to report the per-thread parameters. ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ git status +... +$ cat ~/log.perf +... +d0 | main | region_enter | r1 | 0.002595 | | index | label:preload +d0 | th01:preload_thread | thread_start | | 0.002699 | | | +d0 | th02:preload_thread | thread_start | | 0.002721 | | | +d0 | th01:preload_thread | data | r1 | 0.002736 | 0.000037 | index | offset:0 +d0 | th02:preload_thread | data | r1 | 0.002751 | 0.000030 | index | offset:2032 +d0 | th03:preload_thread | thread_start | | 0.002711 | | | +d0 | th06:preload_thread | thread_start | | 0.002739 | | | +d0 | th01:preload_thread | data | r1 | 0.002766 | 0.000067 | index | count:508 +d0 | th06:preload_thread | data | r1 | 0.002856 | 0.000117 | index | offset:2540 +d0 | th03:preload_thread | data | r1 | 0.002824 | 0.000113 | index | offset:1016 +d0 | th04:preload_thread | thread_start | | 0.002710 | | | +d0 | th02:preload_thread | data | r1 | 0.002779 | 0.000058 | index | count:508 +d0 | th06:preload_thread | data | r1 | 0.002966 | 0.000227 | index | count:508 +d0 | th07:preload_thread | thread_start | | 0.002741 | | | +d0 | th07:preload_thread | data | r1 | 0.003017 | 0.000276 | index | offset:3048 +d0 | th05:preload_thread | thread_start | | 0.002712 | | | +d0 | th05:preload_thread | data | r1 | 0.003067 | 0.000355 | index | offset:1524 +d0 | th05:preload_thread | data | r1 | 0.003090 | 0.000378 | index | count:508 +d0 | th07:preload_thread | data | r1 | 0.003037 | 0.000296 | index | count:504 +d0 | th03:preload_thread | data | r1 | 0.002971 | 0.000260 | index | count:508 +d0 | th04:preload_thread | data | r1 | 0.002983 | 0.000273 | index | offset:508 +d0 | th04:preload_thread | data | r1 | 0.007311 | 0.004601 | index | count:508 +d0 | th05:preload_thread | thread_exit | | 0.008781 | 0.006069 | | +d0 | th01:preload_thread | thread_exit | | 0.009561 | 0.006862 | | +d0 | th03:preload_thread | thread_exit | | 0.009742 | 0.007031 | | +d0 | th06:preload_thread | thread_exit | | 0.009820 | 0.007081 | | +d0 | th02:preload_thread | thread_exit | | 0.010274 | 0.007553 | | +d0 | th07:preload_thread | thread_exit | | 0.010477 | 0.007736 | | +d0 | th04:preload_thread | thread_exit | | 0.011657 | 0.008947 | | +d0 | main | region_leave | r1 | 0.011717 | 0.009122 | index | label:preload +... +d0 | main | exit | | 0.029996 | | | code:0 +d0 | main | atexit | | 0.030027 | | | code:0 +---------------- ++ +In this example, the preload region took 0.009122 seconds. The 7 threads +took between 0.006069 and 0.008947 seconds to work on their portion of +the index. Thread "th01" worked on 508 items at offset 0. Thread "th02" +worked on 508 items at offset 2032. Thread "th04" worked on 508 items +at offset 508. ++ +This example also shows that thread names are assigned in a racy manner +as each thread starts. + +Config (def param) Events:: + + Dump "interesting" config values to trace2 log. ++ +We can optionally emit configuration events, see +`trace2.configparams` in linkgit:git-config[1] for how to enable +it. ++ +---------------- +$ git config --system color.ui never +$ git config --global color.ui always +$ git config --local color.ui auto +$ git config --list --show-scope | grep 'color.ui' +system color.ui=never +global color.ui=always +local color.ui=auto +---------------- ++ +Then, mark the config `color.ui` as "interesting" config with +`GIT_TRACE2_CONFIG_PARAMS`: ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ export GIT_TRACE2_CONFIG_PARAMS=color.ui +$ git version +... +$ cat ~/log.perf +d0 | main | version | | | | | ... +d0 | main | start | | 0.001642 | | | /usr/local/bin/git version +d0 | main | cmd_name | | | | | version (version) +d0 | main | def_param | | | | scope:system | color.ui:never +d0 | main | def_param | | | | scope:global | color.ui:always +d0 | main | def_param | | | | scope:local | color.ui:auto +d0 | main | data | r0 | 0.002100 | 0.002100 | fsync | fsync/writeout-only:0 +d0 | main | data | r0 | 0.002126 | 0.002126 | fsync | fsync/hardware-flush:0 +d0 | main | exit | | 0.000470 | | | code:0 +d0 | main | atexit | | 0.000477 | | | code:0 +---------------- + +Stopwatch Timer Events:: + + Measure the time spent in a function call or span of code + that might be called from many places within the code + throughout the life of the process. ++ +---------------- +static void expensive_function(void) +{ + trace2_timer_start(TRACE2_TIMER_ID_TEST1); + ... + sleep_millisec(1000); // Do something expensive + ... + trace2_timer_stop(TRACE2_TIMER_ID_TEST1); +} + +static int ut_100timer(int argc, const char **argv) +{ + ... + + expensive_function(); + + // Do something else 1... + + expensive_function(); + + // Do something else 2... + + expensive_function(); + + return 0; +} +---------------- ++ +In this example, we measure the total time spent in +`expensive_function()` regardless of when it is called +in the overall flow of the program. ++ +---------------- +$ export GIT_TRACE2_PERF_BRIEF=1 +$ export GIT_TRACE2_PERF=~/log.perf +$ t/helper/test-tool trace2 100timer 3 1000 +... +$ cat ~/log.perf +d0 | main | version | | | | | ... +d0 | main | start | | 0.001453 | | | t/helper/test-tool trace2 100timer 3 1000 +d0 | main | cmd_name | | | | | trace2 (trace2) +d0 | main | exit | | 3.003667 | | | code:0 +d0 | main | timer | | | | test | name:test1 intervals:3 total:3.001686 min:1.000254 max:1.000929 +d0 | main | atexit | | 3.003796 | | | code:0 +---------------- + + +== Future Work + +=== Relationship to the Existing Trace Api (api-trace.txt) + +There are a few issues to resolve before we can completely +switch to Trace2. + +* Updating existing tests that assume `GIT_TRACE` format messages. + +* How to best handle custom `GIT_TRACE_<key>` messages? + +** The `GIT_TRACE_<key>` mechanism allows each <key> to write to a +different file (in addition to just stderr). + +** Do we want to maintain that ability or simply write to the existing +Trace2 targets (and convert <key> to a "category"). |