diff options
Diffstat (limited to '')
| -rw-r--r-- | t/test-lib.sh | 1951 |
1 files changed, 1951 insertions, 0 deletions
diff --git a/t/test-lib.sh b/t/test-lib.sh new file mode 100644 index 0000000..1656c9e --- /dev/null +++ b/t/test-lib.sh @@ -0,0 +1,1951 @@ +# Test framework for git. See t/README for usage. +# +# Copyright (c) 2005 Junio C Hamano +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . + +# Test the binaries we have just built. The tests are kept in +# t/ subdirectory and are run in 'trash directory' subdirectory. +if test -z "$TEST_DIRECTORY" +then + # ensure that TEST_DIRECTORY is an absolute path so that it + # is valid even if the current working directory is changed + TEST_DIRECTORY=$(pwd) +else + # The TEST_DIRECTORY will always be the path to the "t" + # directory in the git.git checkout. This is overridden by + # e.g. t/lib-subtest.sh, but only because its $(pwd) is + # different. Those tests still set "$TEST_DIRECTORY" to the + # same path. + # + # See use of "$GIT_BUILD_DIR" and "$TEST_DIRECTORY" below for + # hard assumptions about "$GIT_BUILD_DIR/t" existing and being + # the "$TEST_DIRECTORY", and e.g. "$TEST_DIRECTORY/helper" + # needing to exist. + TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1 +fi +if test -z "$TEST_OUTPUT_DIRECTORY" +then + # Similarly, override this to store the test-results subdir + # elsewhere + TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY +fi +GIT_BUILD_DIR="${TEST_DIRECTORY%/t}" +if test "$TEST_DIRECTORY" = "$GIT_BUILD_DIR" +then + echo "PANIC: Running in a $TEST_DIRECTORY that doesn't end in '/t'?" >&2 + exit 1 +fi +if test -f "$GIT_BUILD_DIR/GIT-BUILD-DIR" +then + GIT_BUILD_DIR="$(cat "$GIT_BUILD_DIR/GIT-BUILD-DIR")" || exit 1 + # On Windows, we must convert Windows paths lest they contain a colon + case "$(uname -s)" in + *MINGW*) + GIT_BUILD_DIR="$(cygpath -au "$GIT_BUILD_DIR")" + ;; + esac +fi + +# Prepend a string to a VAR using an arbitrary ":" delimiter, not +# adding the delimiter if VAR or VALUE is empty. I.e. a generalized: +# +# VAR=$1${VAR:+${1:+$2}$VAR} +# +# Usage (using ":" as the $2 delimiter): +# +# prepend_var VAR : VALUE +prepend_var () { + eval "$1=\"$3\${$1:+${3:+$2}\$$1}\"" +} + +# If [AL]SAN is in effect we want to abort so that we notice +# problems. The GIT_SAN_OPTIONS variable can be used to set common +# defaults shared between [AL]SAN_OPTIONS. +prepend_var GIT_SAN_OPTIONS : abort_on_error=1 +prepend_var GIT_SAN_OPTIONS : strip_path_prefix="$GIT_BUILD_DIR/" + +# If we were built with ASAN, it may complain about leaks +# of program-lifetime variables. Disable it by default to lower +# the noise level. This needs to happen at the start of the script, +# before we even do our "did we build git yet" check (since we don't +# want that one to complain to stderr). +prepend_var ASAN_OPTIONS : $GIT_SAN_OPTIONS +prepend_var ASAN_OPTIONS : detect_leaks=0 +export ASAN_OPTIONS + +prepend_var LSAN_OPTIONS : $GIT_SAN_OPTIONS +prepend_var LSAN_OPTIONS : fast_unwind_on_malloc=0 +export LSAN_OPTIONS + +prepend_var UBSAN_OPTIONS : $GIT_SAN_OPTIONS +export UBSAN_OPTIONS + +if test ! -f "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +then + echo >&2 'error: GIT-BUILD-OPTIONS missing (has Git been built?).' + exit 1 +fi +. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +export PERL_PATH SHELL_PATH + +# In t0000, we need to override test directories of nested testcases. In case +# the developer has TEST_OUTPUT_DIRECTORY part of his build options, then we'd +# reset this value to instead contain what the developer has specified. We thus +# have this knob to allow overriding the directory. +if test -n "${TEST_OUTPUT_DIRECTORY_OVERRIDE}" +then + TEST_OUTPUT_DIRECTORY="${TEST_OUTPUT_DIRECTORY_OVERRIDE}" +fi + +# Disallow the use of abbreviated options in the test suite by default +if test -z "${GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS}" +then + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true + export GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS +fi + +# Explicitly set the default branch name for testing, to avoid the +# transitory "git init" warning under --verbose. +: ${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME:=master} +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME + +################################################################ +# It appears that people try to run tests without building... +"${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null +if test $? != 1 +then + if test -n "$GIT_TEST_INSTALLED" + then + echo >&2 "error: there is no working Git at '$GIT_TEST_INSTALLED'" + else + echo >&2 'error: you do not seem to have built git yet.' + fi + exit 1 +fi + +store_arg_to= +opt_required_arg= +# $1: option string +# $2: name of the var where the arg will be stored +mark_option_requires_arg () { + if test -n "$opt_required_arg" + then + echo "error: options that require args cannot be bundled" \ + "together: '$opt_required_arg' and '$1'" >&2 + exit 1 + fi + opt_required_arg=$1 + store_arg_to=$2 +} + +# These functions can be overridden e.g. to output JUnit XML +start_test_output () { :; } +start_test_case_output () { :; } +finalize_test_case_output () { :; } +finalize_test_output () { :; } + +parse_option () { + local opt="$1" + + case "$opt" in + -d|--d|--de|--deb|--debu|--debug) + debug=t ;; + -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) + immediate=t ;; + -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) + GIT_TEST_LONG=t; export GIT_TEST_LONG ;; + -r) + mark_option_requires_arg "$opt" run_list + ;; + --run=*) + run_list=${opt#--*=} ;; + -h|--h|--he|--hel|--help) + help=t ;; + -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) + verbose=t ;; + --verbose-only=*) + verbose_only=${opt#--*=} + ;; + -q|--q|--qu|--qui|--quie|--quiet) + # Ignore --quiet under a TAP::Harness. Saying how many tests + # passed without the ok/not ok details is always an error. + test -z "$HARNESS_ACTIVE" && quiet=t ;; + --with-dashes) + with_dashes=t ;; + --no-bin-wrappers) + no_bin_wrappers=t ;; + --no-color) + color= ;; + --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) + valgrind=memcheck + tee=t + ;; + --valgrind=*) + valgrind=${opt#--*=} + tee=t + ;; + --valgrind-only=*) + valgrind_only=${opt#--*=} + tee=t + ;; + --tee) + tee=t ;; + --root=*) + root=${opt#--*=} ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 ;; + -x) + trace=t ;; + -V|--verbose-log) + verbose_log=t + tee=t + ;; + --write-junit-xml) + . "$TEST_DIRECTORY/test-lib-junit.sh" + ;; + --github-workflow-markup) + . "$TEST_DIRECTORY/test-lib-github-workflow-markup.sh" + ;; + --stress) + stress=t ;; + --stress=*) + echo "error: --stress does not accept an argument: '$opt'" >&2 + echo "did you mean --stress-jobs=${opt#*=} or --stress-limit=${opt#*=}?" >&2 + exit 1 + ;; + --stress-jobs=*) + stress=t; + stress_jobs=${opt#--*=} + case "$stress_jobs" in + *[!0-9]*|0*|"") + echo "error: --stress-jobs=<N> requires the number of jobs to run" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + --stress-limit=*) + stress=t; + stress_limit=${opt#--*=} + case "$stress_limit" in + *[!0-9]*|0*|"") + echo "error: --stress-limit=<N> requires the number of repetitions" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + --invert-exit-code) + invert_exit_code=t + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac +} + +# Parse options while taking care to leave $@ intact, so we will still +# have all the original command line options when executing the test +# script again for '--tee' and '--verbose-log' later. +for opt +do + if test -n "$store_arg_to" + then + eval $store_arg_to=\$opt + store_arg_to= + opt_required_arg= + continue + fi + + case "$opt" in + --*|-?) + parse_option "$opt" ;; + -?*) + # bundled short options must be fed separately to parse_option + opt=${opt#-} + while test -n "$opt" + do + extra=${opt#?} + this=${opt%$extra} + opt=$extra + parse_option "-$this" + done + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac +done +if test -n "$store_arg_to" +then + echo "error: $opt_required_arg requires an argument" >&2 + exit 1 +fi + +if test -n "$valgrind_only" +then + test -z "$valgrind" && valgrind=memcheck + test -z "$verbose" && verbose_only="$valgrind_only" +elif test -n "$valgrind" +then + test -z "$verbose_log" && verbose=t +fi + +if test -n "$stress" +then + verbose=t + trace=t + immediate=t +fi + +TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}" +TEST_NAME="$(basename "$0" .sh)" +TEST_NUMBER="${TEST_NAME%%-*}" +TEST_NUMBER="${TEST_NUMBER#t}" +TEST_RESULTS_DIR="$TEST_OUTPUT_DIRECTORY/test-results" +TEST_RESULTS_BASE="$TEST_RESULTS_DIR/$TEST_NAME$TEST_STRESS_JOB_SFX" +TEST_RESULTS_SAN_FILE_PFX=trace +TEST_RESULTS_SAN_DIR_SFX=leak +TEST_RESULTS_SAN_FILE= +TEST_RESULTS_SAN_DIR="$TEST_RESULTS_DIR/$TEST_NAME.$TEST_RESULTS_SAN_DIR_SFX" +TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP= +TRASH_DIRECTORY="trash directory.$TEST_NAME$TEST_STRESS_JOB_SFX" +test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" +case "$TRASH_DIRECTORY" in +/*) ;; # absolute path is good + *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; +esac + +# Utility functions using $TEST_RESULTS_* variables +nr_san_dir_leaks_ () { + # stderr piped to /dev/null because the directory may have + # been "rmdir"'d already. + find "$TEST_RESULTS_SAN_DIR" \ + -type f \ + -name "$TEST_RESULTS_SAN_FILE_PFX.*" 2>/dev/null | + xargs grep -lv "Unable to get registers from thread" | + wc -l +} + +# If --stress was passed, run this test repeatedly in several parallel loops. +if test "$GIT_TEST_STRESS_STARTED" = "done" +then + : # Don't stress test again. +elif test -n "$stress" +then + if test -n "$stress_jobs" + then + job_count=$stress_jobs + elif test -n "$GIT_TEST_STRESS_LOAD" + then + job_count="$GIT_TEST_STRESS_LOAD" + elif job_count=$(getconf _NPROCESSORS_ONLN 2>/dev/null) && + test -n "$job_count" + then + job_count=$((2 * $job_count)) + else + job_count=8 + fi + + mkdir -p "$TEST_RESULTS_DIR" + stressfail="$TEST_RESULTS_BASE.stress-failed" + rm -f "$stressfail" + + stress_exit=0 + trap ' + kill $job_pids 2>/dev/null + wait + stress_exit=1 + ' TERM INT HUP + + job_pids= + job_nr=0 + while test $job_nr -lt "$job_count" + do + ( + GIT_TEST_STRESS_STARTED=done + GIT_TEST_STRESS_JOB_NR=$job_nr + export GIT_TEST_STRESS_STARTED GIT_TEST_STRESS_JOB_NR + + trap ' + kill $test_pid 2>/dev/null + wait + exit 1 + ' TERM INT + + cnt=1 + while ! test -e "$stressfail" && + { test -z "$stress_limit" || + test $cnt -le $stress_limit ; } + do + $TEST_SHELL_PATH "$0" "$@" >"$TEST_RESULTS_BASE.stress-$job_nr.out" 2>&1 & + test_pid=$! + + if wait $test_pid + then + printf "OK %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + else + echo $GIT_TEST_STRESS_JOB_NR >>"$stressfail" + printf "FAIL %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + fi + cnt=$(($cnt + 1)) + done + ) & + job_pids="$job_pids $!" + job_nr=$(($job_nr + 1)) + done + + wait + + if test -f "$stressfail" + then + stress_exit=1 + echo "Log(s) of failed test run(s):" + for failed_job_nr in $(sort -n "$stressfail") + do + echo "Contents of '$TEST_RESULTS_BASE.stress-$failed_job_nr.out':" + cat "$TEST_RESULTS_BASE.stress-$failed_job_nr.out" + done + rm -rf "$TRASH_DIRECTORY.stress-failed" + # Move the last one. + mv "$TRASH_DIRECTORY.stress-$failed_job_nr" "$TRASH_DIRECTORY.stress-failed" + fi + + exit $stress_exit +fi + +# if --tee was passed, write the output not only to the terminal, but +# additionally to the file test-results/$BASENAME.out, too. +if test "$GIT_TEST_TEE_STARTED" = "done" +then + : # do not redirect again +elif test -n "$tee" +then + mkdir -p "$TEST_RESULTS_DIR" + + # Make this filename available to the sub-process in case it is using + # --verbose-log. + GIT_TEST_TEE_OUTPUT_FILE=$TEST_RESULTS_BASE.out + export GIT_TEST_TEE_OUTPUT_FILE + + # Truncate before calling "tee -a" to get rid of the results + # from any previous runs. + >"$GIT_TEST_TEE_OUTPUT_FILE" + + (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1; + echo $? >"$TEST_RESULTS_BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" + test "$(cat "$TEST_RESULTS_BASE.exit")" = 0 + exit +fi + +if test -n "$trace" && test -n "$test_untraceable" +then + # '-x' tracing requested, but this test script can't be reliably + # traced, unless it is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). + # + # Perform this version check _after_ the test script was + # potentially re-executed with $TEST_SHELL_PATH for '--tee' or + # '--verbose-log', so the right shell is checked and the + # warning is issued only once. + if test -n "$BASH_VERSION" && eval ' + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + ' + then + : Executed by a Bash version supporting BASH_XTRACEFD. Good. + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + trace= + fi +fi +if test -n "$trace" && test -z "$verbose_log" +then + verbose=t +fi + +# Since bash 5.0, checkwinsize is enabled by default which does +# update the COLUMNS variable every time a non-builtin command +# completes, even for non-interactive shells. +# Disable that since we are aiming for repeatability. +test -n "$BASH_VERSION" && shopt -u checkwinsize 2>/dev/null + +# For repeatability, reset the environment to known value. +# TERM is sanitized below, after saving color control sequences. +LANG=C +LC_ALL=C +PAGER=cat +TZ=UTC +COLUMNS=80 +export LANG LC_ALL PAGER TZ COLUMNS +EDITOR=: + +# A call to "unset" with no arguments causes at least Solaris 10 +# /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets +# deriving from the command substitution clustered with the other +# ones. +unset VISUAL EMAIL LANGUAGE $("$PERL_PATH" -e ' + my @env = keys %ENV; + my $ok = join("|", qw( + TRACE + DEBUG + TEST + .*_TEST + PROVE + VALGRIND + UNZIP + PERF_ + CURL_VERBOSE + TRACE_CURL + )); + my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); + print join("\n", @vars); +') +unset XDG_CACHE_HOME +unset XDG_CONFIG_HOME +unset GITPERLLIB +unset GIT_TRACE2_PARENT_NAME +unset GIT_TRACE2_PARENT_SID +TEST_AUTHOR_LOCALNAME=author +TEST_AUTHOR_DOMAIN=example.com +GIT_AUTHOR_EMAIL=${TEST_AUTHOR_LOCALNAME}@${TEST_AUTHOR_DOMAIN} +GIT_AUTHOR_NAME='A U Thor' +GIT_AUTHOR_DATE='1112354055 +0200' +TEST_COMMITTER_LOCALNAME=committer +TEST_COMMITTER_DOMAIN=example.com +GIT_COMMITTER_EMAIL=${TEST_COMMITTER_LOCALNAME}@${TEST_COMMITTER_DOMAIN} +GIT_COMMITTER_NAME='C O Mitter' +GIT_COMMITTER_DATE='1112354055 +0200' +GIT_MERGE_VERBOSITY=5 +GIT_MERGE_AUTOEDIT=no +export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT +export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME +export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME +export GIT_COMMITTER_DATE GIT_AUTHOR_DATE +export EDITOR + +GIT_DEFAULT_HASH="${GIT_TEST_DEFAULT_HASH:-sha1}" +export GIT_DEFAULT_HASH +GIT_TEST_MERGE_ALGORITHM="${GIT_TEST_MERGE_ALGORITHM:-ort}" +export GIT_TEST_MERGE_ALGORITHM + +# Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output +GIT_TRACE_BARE=1 +export GIT_TRACE_BARE + +# Some tests scan the GIT_TRACE2_EVENT feed for events, but the +# default depth is 2, which frequently causes issues when the +# events are wrapped in new regions. Set it to a sufficiently +# large depth to avoid custom changes in the test suite. +GIT_TRACE2_EVENT_NESTING=100 +export GIT_TRACE2_EVENT_NESTING + +# Use specific version of the index file format +if test -n "${GIT_TEST_INDEX_VERSION:+isset}" +then + GIT_INDEX_VERSION="$GIT_TEST_INDEX_VERSION" + export GIT_INDEX_VERSION +fi + +if test -n "$GIT_TEST_PERL_FATAL_WARNINGS" +then + GIT_PERL_FATAL_WARNINGS=1 + export GIT_PERL_FATAL_WARNINGS +fi + +case $GIT_TEST_FSYNC in +'') + GIT_TEST_FSYNC=0 + export GIT_TEST_FSYNC + ;; +esac + +# Add libc MALLOC and MALLOC_PERTURB test only if we are not executing +# the test with valgrind and have not compiled with conflict SANITIZE +# options. +if test -n "$valgrind" || + test -n "$SANITIZE_ADDRESS" || + test -n "$SANITIZE_LEAK" || + test -n "$TEST_NO_MALLOC_CHECK" +then + setup_malloc_check () { + : nothing + } + teardown_malloc_check () { + : nothing + } +else + _USE_GLIBC_TUNABLES= + if _GLIBC_VERSION=$(getconf GNU_LIBC_VERSION 2>/dev/null) && + _GLIBC_VERSION=${_GLIBC_VERSION#"glibc "} && + expr 2.34 \<= "$_GLIBC_VERSION" >/dev/null + then + _USE_GLIBC_TUNABLES=YesPlease + fi + setup_malloc_check () { + local g + local t + MALLOC_CHECK_=3 MALLOC_PERTURB_=165 + export MALLOC_CHECK_ MALLOC_PERTURB_ + if test -n "$_USE_GLIBC_TUNABLES" + then + g= + LD_PRELOAD="libc_malloc_debug.so.0" + for t in \ + glibc.malloc.check=1 \ + glibc.malloc.perturb=165 + do + g="${g#:}:$t" + done + GLIBC_TUNABLES=$g + export LD_PRELOAD GLIBC_TUNABLES + fi + } + teardown_malloc_check () { + unset MALLOC_CHECK_ MALLOC_PERTURB_ + unset LD_PRELOAD GLIBC_TUNABLES + } +fi + +# Protect ourselves from common misconfiguration to export +# CDPATH into the environment +unset CDPATH + +unset GREP_OPTIONS +unset UNZIP + +case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in +1|2|true) + GIT_TRACE=4 + ;; +esac + +# Line feed +LF=' +' + +# Single quote +SQ=\' + +# UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores +# when case-folding filenames +u200c=$(printf '\342\200\214') + +export _x05 _x35 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX + +test "x$TERM" != "xdumb" && ( + test -t 1 && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t + +if test -n "$color" +then + # Save the color control sequences now rather than run tput + # each time say_color() is called. This is done for two + # reasons: + # * TERM will be changed to dumb + # * HOME will be changed to a temporary directory and tput + # might need to read ~/.terminfo from the original HOME + # directory to get the control sequences + # Note: This approach assumes the control sequences don't end + # in a newline for any terminal of interest (command + # substitutions strip trailing newlines). Given that most + # (all?) terminals in common use are related to ECMA-48, this + # shouldn't be a problem. + say_color_error=$(tput bold; tput setaf 1) # bold red + say_color_skip=$(tput setaf 4) # blue + say_color_warn=$(tput setaf 3) # brown/yellow + say_color_pass=$(tput setaf 2) # green + say_color_info=$(tput setaf 6) # cyan + say_color_reset=$(tput sgr0) + say_color_="" # no formatting for normal text + say_color () { + test -z "$1" && test -n "$quiet" && return + eval "say_color_color=\$say_color_$1" + shift + printf "%s\\n" "$say_color_color$*$say_color_reset" + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi + +USER_TERM="$TERM" +TERM=dumb +export TERM USER_TERM + +# What is written by tests to stdout and stderr is sent to different places +# depending on the test mode (e.g. /dev/null in non-verbose mode, piped to tee +# with --tee option, etc.). We save the original stdin to FD #6 and stdout and +# stderr to #5 and #7, so that the test framework can use them (e.g. for +# printing errors within the test framework) independently of the test mode. +exec 5>&1 +exec 6<&0 +exec 7>&2 + +_error_exit () { + finalize_test_output + GIT_EXIT_OK=t + exit 1 +} + +error () { + say_color error "error: $*" + _error_exit +} + +BUG () { + error >&7 "bug in the test script: $*" +} + +BAIL_OUT () { + test $# -ne 1 && BUG "1 param" + + # Do not change "Bail out! " string. It's part of TAP syntax: + # https://testanything.org/tap-specification.html + local bail_out="Bail out! " + local message="$1" + + say_color >&5 error $bail_out "$message" + _error_exit +} + +say () { + say_color info "$*" +} + +if test -n "$HARNESS_ACTIVE" +then + if test "$verbose" = t || test -n "$verbose_only" + then + BAIL_OUT 'verbose mode forbidden under TAP harness; try --verbose-log' + fi +fi + +test "${test_description}" != "" || +error "Test script did not set test_description." + +if test "$help" = "t" +then + printf '%s\n' "$test_description" + exit 0 +fi + +if test "$verbose_log" = "t" +then + exec 3>>"$GIT_TEST_TEE_OUTPUT_FILE" 4>&3 +elif test "$verbose" = "t" +then + exec 4>&2 3>&1 +else + exec 4>/dev/null 3>/dev/null +fi + +# Send any "-x" output directly to stderr to avoid polluting tests +# which capture stderr. We can do this unconditionally since it +# has no effect if tracing isn't turned on. +# +# Note that this sets up the trace fd as soon as we assign the variable, so it +# must come after the creation of descriptor 4 above. Likewise, we must never +# unset this, as it has the side effect of closing descriptor 4, which we +# use to show verbose tests to the user. +# +# Note also that we don't need or want to export it. The tracing is local to +# this shell, and we would not want to influence any shells we exec. +BASH_XTRACEFD=4 + +test_failure=0 +test_count=0 +test_fixed=0 +test_broken=0 +test_success=0 + +test_missing_prereq= + +test_external_has_tap=0 + +die () { + code=$? + # This is responsible for running the atexit commands even when a + # test script run with '--immediate' fails, or when the user hits + # ctrl-C, i.e. when 'test_done' is not invoked at all. + test_atexit_handler || code=$? + if test -n "$GIT_EXIT_OK" + then + exit $code + else + echo >&5 "FATAL: Unexpected exit with code $code" + exit 1 + fi +} + +GIT_EXIT_OK= +trap 'die' EXIT +# Disable '-x' tracing, because with some shells, notably dash, it +# prevents running the cleanup commands when a test script run with +# '--verbose-log -x' is interrupted. +trap '{ code=$?; set +x; } 2>/dev/null; exit $code' INT TERM HUP + +# The user-facing functions are loaded from a separate file so that +# test_perf subshells can have them too +. "$TEST_DIRECTORY/test-lib-functions.sh" + +# You are not expected to call test_ok_ and test_failure_ directly, use +# the test_expect_* functions instead. + +test_ok_ () { + test_success=$(($test_success + 1)) + say_color "" "ok $test_count - $@" + finalize_test_case_output ok "$@" +} + +_invert_exit_code_failure_end_blurb () { + say_color warn "# faked up failures as TODO & now exiting with 0 due to --invert-exit-code" +} + +test_failure_ () { + failure_label=$1 + test_failure=$(($test_failure + 1)) + local pfx="" + if test -n "$invert_exit_code" # && test -n "$HARNESS_ACTIVE" + then + pfx="# TODO induced breakage (--invert-exit-code):" + fi + say_color error "not ok $test_count - ${pfx:+$pfx }$1" + shift + printf '%s\n' "$*" | sed -e 's/^/# /' + if test -n "$immediate" + then + say_color error "1..$test_count" + if test -n "$invert_exit_code" + then + finalize_test_output + _invert_exit_code_failure_end_blurb + GIT_EXIT_OK=t + exit 0 + fi + _error_exit + fi + finalize_test_case_output failure "$failure_label" "$@" +} + +test_known_broken_ok_ () { + test_fixed=$(($test_fixed+1)) + say_color error "ok $test_count - $1 # TODO known breakage vanished" + finalize_test_case_output fixed "$1" +} + +test_known_broken_failure_ () { + test_broken=$(($test_broken+1)) + say_color warn "not ok $test_count - $1 # TODO known breakage" + finalize_test_case_output broken "$1" +} + +test_debug () { + test "$debug" = "" || eval "$1" +} + +match_pattern_list () { + arg="$1" + shift + test -z "$*" && return 1 + # We need to use "$*" to get field-splitting, but we want to + # disable globbing, since we are matching against an arbitrary + # $arg, not what's in the filesystem. Using "set -f" accomplishes + # that, but we must do it in a subshell to avoid impacting the + # rest of the script. The exit value of the subshell becomes + # the function's return value. + ( + set -f + for pattern_ in $* + do + case "$arg" in + $pattern_) + exit 0 + ;; + esac + done + exit 1 + ) +} + +match_test_selector_list () { + operation="$1" + shift + title="$1" + shift + arg="$1" + shift + test -z "$1" && return 0 + + # Commas are accepted as separators. + OLDIFS=$IFS + IFS=',' + set -- $1 + IFS=$OLDIFS + + # If the first selector is negative we include by default. + include= + case "$1" in + !*) include=t ;; + esac + + for selector + do + orig_selector=$selector + + positive=t + case "$selector" in + !*) + positive= + selector=${selector##?} + ;; + esac + + test -z "$selector" && continue + + case "$selector" in + *-*) + if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $operation: invalid non-numeric in range" \ + "start: '$orig_selector'" >&2 + exit 1 + fi + if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $operation: invalid non-numeric in range" \ + "end: '$orig_selector'" >&2 + exit 1 + fi + ;; + *) + if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null + then + case "$title" in *${selector}*) + include=$positive + ;; + esac + continue + fi + esac + + # Short cut for "obvious" cases + test -z "$include" && test -z "$positive" && continue + test -n "$include" && test -n "$positive" && continue + + case "$selector" in + -*) + if test $arg -le ${selector#-} + then + include=$positive + fi + ;; + *-) + if test $arg -ge ${selector%-} + then + include=$positive + fi + ;; + *-*) + if test ${selector%%-*} -le $arg \ + && test $arg -le ${selector#*-} + then + include=$positive + fi + ;; + *) + if test $arg -eq $selector + then + include=$positive + fi + ;; + esac + done + + test -n "$include" +} + +maybe_teardown_verbose () { + test -z "$verbose_only" && return + exec 4>/dev/null 3>/dev/null + verbose= +} + +last_verbose=t +maybe_setup_verbose () { + test -z "$verbose_only" && return + if match_pattern_list $test_count "$verbose_only" + then + exec 4>&2 3>&1 + # Emit a delimiting blank line when going from + # non-verbose to verbose. Within verbose mode the + # delimiter is printed by test_expect_*. The choice + # of the initial $last_verbose is such that before + # test 1, we do not print it. + test -z "$last_verbose" && echo >&3 "" + verbose=t + else + exec 4>/dev/null 3>/dev/null + verbose= + fi + last_verbose=$verbose +} + +maybe_teardown_valgrind () { + test -z "$GIT_VALGRIND" && return + GIT_VALGRIND_ENABLED= +} + +maybe_setup_valgrind () { + test -z "$GIT_VALGRIND" && return + if test -z "$valgrind_only" + then + GIT_VALGRIND_ENABLED=t + return + fi + GIT_VALGRIND_ENABLED= + if match_pattern_list $test_count "$valgrind_only" + then + GIT_VALGRIND_ENABLED=t + fi +} + +trace_level_=0 +want_trace () { + test "$trace" = t && { + test "$verbose" = t || test "$verbose_log" = t + } +} + +# This is a separate function because some tests use +# "return" to end a test_expect_success block early +# (and we want to make sure we run any cleanup like +# "set +x"). +test_eval_inner_ () { + eval "$*" +} + +test_eval_ () { + # If "-x" tracing is in effect, then we want to avoid polluting stderr + # with non-test commands. But once in "set -x" mode, we cannot prevent + # the shell from printing the "set +x" to turn it off (nor the saving + # of $? before that). But we can make sure that the output goes to + # /dev/null. + # + # There are a few subtleties here: + # + # - we have to redirect descriptor 4 in addition to 2, to cover + # BASH_XTRACEFD + # + # - the actual eval has to come before the redirection block (since + # it needs to see descriptor 4 to set up its stderr) + # + # - likewise, any error message we print must be outside the block to + # access descriptor 4 + # + # - checking $? has to come immediately after the eval, but it must + # be _inside_ the block to avoid polluting the "set -x" output + # + + # Do not add anything extra (including LF) after '$*' + test_eval_inner_ </dev/null >&3 2>&4 " + want_trace && trace_level_=$(($trace_level_+1)) && set -x + $*" + { + test_eval_ret_=$? + if want_trace + then + test 1 = $trace_level_ && set +x + trace_level_=$(($trace_level_-1)) + fi + } 2>/dev/null 4>&2 + + if test "$test_eval_ret_" != 0 && want_trace + then + say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" + fi + return $test_eval_ret_ +} + +fail_117 () { + return 117 +} + +test_run_ () { + test_cleanup=: + expecting_failure=$2 + + if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then + # 117 is magic because it is unlikely to match the exit + # code of other programs + test_eval_inner_ "fail_117 && $1" </dev/null >&3 2>&4 + if test $? != 117 + then + BUG "broken &&-chain: $1" + fi + fi + + setup_malloc_check + test_eval_ "$1" + eval_ret=$? + teardown_malloc_check + + if test -z "$immediate" || test $eval_ret = 0 || + test -n "$expecting_failure" && test "$test_cleanup" != ":" + then + setup_malloc_check + test_eval_ "$test_cleanup" + teardown_malloc_check + fi + if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE" + then + echo "" + fi + return "$eval_ret" +} + +test_start_ () { + test_count=$(($test_count+1)) + maybe_setup_verbose + maybe_setup_valgrind + start_test_case_output "$@" +} + +test_finish_ () { + echo >&3 "" + maybe_teardown_valgrind + maybe_teardown_verbose + if test -n "$GIT_TEST_TEE_OFFSET" + then + GIT_TEST_TEE_OFFSET=$(test-tool path-utils file-size \ + "$GIT_TEST_TEE_OUTPUT_FILE") + fi +} + +test_skip () { + to_skip= + skipped_reason= + if match_pattern_list $this_test.$test_count "$GIT_SKIP_TESTS" + then + to_skip=t + skipped_reason="GIT_SKIP_TESTS" + fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' "$1" $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi + if test -z "$to_skip" && test -n "$test_prereq" && + ! test_have_prereq "$test_prereq" + then + to_skip=t + + of_prereq= + if test "$missing_prereq" != "$test_prereq" + then + of_prereq=" of $test_prereq" + fi + skipped_reason="missing $missing_prereq${of_prereq}" + + # Keep a list of all the missing prereq for result aggregation + if test -z "$missing_prereq" + then + test_missing_prereq=$missing_prereq + else + test_missing_prereq="$test_missing_prereq,$missing_prereq" + fi + fi + + case "$to_skip" in + t) + + say_color skip "ok $test_count # skip $1 ($skipped_reason)" + : true + finalize_test_case_output skip "$@" + ;; + *) + false + ;; + esac +} + +# stub; perf-lib overrides it +test_at_end_hook_ () { + : +} + +test_atexit_cleanup=: +test_atexit_handler () { + # In a succeeding test script 'test_atexit_handler' is invoked + # twice: first from 'test_done', then from 'die' in the trap on + # EXIT. + # This condition and resetting 'test_atexit_cleanup' below makes + # sure that the registered cleanup commands are run only once. + test : != "$test_atexit_cleanup" || return 0 + + setup_malloc_check + test_eval_ "$test_atexit_cleanup" + test_atexit_cleanup=: + teardown_malloc_check +} + +sanitize_leak_log_message_ () { + local new="$1" && + local old="$2" && + local file="$3" && + + printf "With SANITIZE=leak at exit we have %d leak logs, but started with %d + +This means that we have a blindspot where git is leaking but we're +losing the exit code somewhere, or not propagating it appropriately +upwards! + +See the logs at \"%s.*\"; +those logs are reproduced below." \ + "$new" "$old" "$file" +} + +check_test_results_san_file_ () { + if test -z "$TEST_RESULTS_SAN_FILE" + then + return + fi && + local old="$TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP" && + local new="$(nr_san_dir_leaks_)" && + + if test $new -le $old + then + return + fi && + local out="$(sanitize_leak_log_message_ "$new" "$old" "$TEST_RESULTS_SAN_FILE")" && + say_color error "$out" && + if test "$old" != 0 + then + echo && + say_color error "The logs include output from past runs to avoid" && + say_color error "that remove 'test-results' between runs." + fi && + say_color error "$(cat "$TEST_RESULTS_SAN_FILE".*)" && + + if test -n "$passes_sanitize_leak" && test "$test_failure" = 0 + then + say "As TEST_PASSES_SANITIZE_LEAK=true and our logs show we're leaking, exit non-zero!" && + invert_exit_code=t + elif test -n "$passes_sanitize_leak" + then + say "As TEST_PASSES_SANITIZE_LEAK=true and our logs show we're leaking, and we're failing for other reasons too..." && + invert_exit_code= + elif test -n "$sanitize_leak_check" && test "$test_failure" = 0 + then + say "As TEST_PASSES_SANITIZE_LEAK=true isn't set the above leak is 'ok' with GIT_TEST_PASSING_SANITIZE_LEAK=check" && + invert_exit_code= + elif test -n "$sanitize_leak_check" + then + say "As TEST_PASSES_SANITIZE_LEAK=true isn't set the above leak is 'ok' with GIT_TEST_PASSING_SANITIZE_LEAK=check" && + invert_exit_code=t + else + say "With GIT_TEST_SANITIZE_LEAK_LOG=true our logs revealed a memory leak, exit non-zero!" && + invert_exit_code=t + fi +} + +test_done () { + # Run the atexit commands _before_ the trash directory is + # removed, so the commands can access pidfiles and socket files. + test_atexit_handler + + finalize_test_output + + if test -z "$HARNESS_ACTIVE" + then + mkdir -p "$TEST_RESULTS_DIR" + + cat >"$TEST_RESULTS_BASE.counts" <<-EOF + total $test_count + success $test_success + fixed $test_fixed + broken $test_broken + failed $test_failure + missing_prereq $test_missing_prereq + + EOF + fi + + if test "$test_fixed" != 0 + then + say_color error "# $test_fixed known breakage(s) vanished; please update test(s)" + fi + if test "$test_broken" != 0 + then + say_color warn "# still have $test_broken known breakage(s)" + fi + if test "$test_broken" != 0 || test "$test_fixed" != 0 + then + test_remaining=$(( $test_count - $test_broken - $test_fixed )) + msg="remaining $test_remaining test(s)" + else + test_remaining=$test_count + msg="$test_count test(s)" + fi + case "$test_failure" in + 0) + if test $test_remaining -gt 0 + then + say_color pass "# passed all $msg" + fi + + # Maybe print SKIP message + test -z "$skip_all" || skip_all="# SKIP $skip_all" + case "$test_count" in + 0) + say "1..$test_count${skip_all:+ $skip_all}" + ;; + *) + test -z "$skip_all" || + say_color warn "$skip_all" + say "1..$test_count" + ;; + esac + + if test -n "$stress" && test -n "$invert_exit_code" + then + # We're about to move our "$TRASH_DIRECTORY" + # to "$TRASH_DIRECTORY.stress-failed" if + # --stress is combined with + # --invert-exit-code. + say "with --stress and --invert-exit-code we're not removing '$TRASH_DIRECTORY'" + elif test -z "$debug" && test -n "$remove_trash" + then + test -d "$TRASH_DIRECTORY" || + error "Tests passed but trash directory already removed before test cleanup; aborting" + + cd "$TRASH_DIRECTORY/.." && + rm -fr "$TRASH_DIRECTORY" || { + # try again in a bit + sleep 5; + rm -fr "$TRASH_DIRECTORY" + } || + error "Tests passed but test cleanup failed; aborting" + fi + + check_test_results_san_file_ "$test_failure" + + if test -z "$skip_all" && test -n "$invert_exit_code" + then + say_color warn "# faking up non-zero exit with --invert-exit-code" + GIT_EXIT_OK=t + exit 1 + fi + + test_at_end_hook_ + + GIT_EXIT_OK=t + exit 0 ;; + + *) + say_color error "# failed $test_failure among $msg" + say "1..$test_count" + + check_test_results_san_file_ "$test_failure" + + if test -n "$invert_exit_code" + then + _invert_exit_code_failure_end_blurb + GIT_EXIT_OK=t + exit 0 + fi + + GIT_EXIT_OK=t + exit 1 ;; + + esac +} + +if test -n "$valgrind" +then + make_symlink () { + test -h "$2" && + test "$1" = "$(readlink "$2")" || { + # be super paranoid + if mkdir "$2".lock + then + rm -f "$2" && + ln -s "$1" "$2" && + rm -r "$2".lock + else + while test -d "$2".lock + do + say "Waiting for lock on $2." + sleep 1 + done + fi + } + } + + make_valgrind_symlink () { + # handle only executables, unless they are shell libraries that + # need to be in the exec-path. + test -x "$1" || + test "# " = "$(test_copy_bytes 2 <"$1")" || + return; + + base=$(basename "$1") + case "$base" in + test-*) + symlink_target="$GIT_BUILD_DIR/t/helper/$base" + ;; + *) + symlink_target="$GIT_BUILD_DIR/$base" + ;; + esac + # do not override scripts + if test -x "$symlink_target" && + test ! -d "$symlink_target" && + test "#!" != "$(test_copy_bytes 2 <"$symlink_target")" + then + symlink_target=../valgrind.sh + fi + case "$base" in + *.sh|*.perl) + symlink_target=../unprocessed-script + esac + # create the link, or replace it if it is out of date + make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit + } + + # override all git executables in TEST_DIRECTORY/.. + GIT_VALGRIND=$TEST_DIRECTORY/valgrind + mkdir -p "$GIT_VALGRIND"/bin + for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/t/helper/test-* + do + make_valgrind_symlink $file + done + # special-case the mergetools loadables + make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools" + OLDIFS=$IFS + IFS=: + for path in $PATH + do + ls "$path"/git-* 2> /dev/null | + while read file + do + make_valgrind_symlink "$file" + done + done + IFS=$OLDIFS + PATH=$GIT_VALGRIND/bin:$PATH + GIT_EXEC_PATH=$GIT_VALGRIND/bin + export GIT_VALGRIND + GIT_VALGRIND_MODE="$valgrind" + export GIT_VALGRIND_MODE + GIT_VALGRIND_ENABLED=t + test -n "$valgrind_only" && GIT_VALGRIND_ENABLED= + export GIT_VALGRIND_ENABLED +elif test -n "$GIT_TEST_INSTALLED" +then + GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) || + error "Cannot run git from $GIT_TEST_INSTALLED." + PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH + GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} +else # normal case, use ../bin-wrappers only unless $with_dashes: + if test -n "$no_bin_wrappers" + then + with_dashes=t + else + git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" + if ! test -x "$git_bin_dir/git" + then + if test -z "$with_dashes" + then + say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" + fi + with_dashes=t + fi + PATH="$git_bin_dir:$PATH" + fi + GIT_EXEC_PATH=$GIT_BUILD_DIR + if test -n "$with_dashes" + then + PATH="$GIT_BUILD_DIR:$GIT_BUILD_DIR/t/helper:$PATH" + fi +fi +GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt +GIT_CONFIG_NOSYSTEM=1 +GIT_ATTR_NOSYSTEM=1 +GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." +export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM GIT_CEILING_DIRECTORIES + +if test -z "$GIT_TEST_CMP" +then + if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT" + then + GIT_TEST_CMP="$DIFF -c" + else + GIT_TEST_CMP="$DIFF -u" + fi +fi + +GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib +export GITPERLLIB +test -d "$GIT_BUILD_DIR"/templates/blt || { + BAIL_OUT "You haven't built things yet, have you?" +} + +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool$X +then + BAIL_OUT 'You need to build test-tool; Run "make t/helper/test-tool" in the source (toplevel) directory' +fi + +# Are we running this test at all? +remove_trash= +this_test=${0##*/} +this_test=${this_test%%-*} +if match_pattern_list "$this_test" "$GIT_SKIP_TESTS" +then + say_color info >&3 "skipping test $this_test altogether" + skip_all="skip all tests in $this_test" + test_done +fi + +BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK () { + BAIL_OUT "$1 has no effect except when compiled with SANITIZE=leak" +} + +if test -n "$SANITIZE_LEAK" +then + # Normalize with test_bool_env + passes_sanitize_leak= + + # We need to see TEST_PASSES_SANITIZE_LEAK in "test-tool + # env-helper" (via test_bool_env) + export TEST_PASSES_SANITIZE_LEAK + if test_bool_env TEST_PASSES_SANITIZE_LEAK false + then + passes_sanitize_leak=t + fi + + if test "$GIT_TEST_PASSING_SANITIZE_LEAK" = "check" + then + sanitize_leak_check=t + if test -n "$invert_exit_code" + then + BAIL_OUT "cannot use --invert-exit-code under GIT_TEST_PASSING_SANITIZE_LEAK=check" + fi + + if test -z "$passes_sanitize_leak" + then + say "in GIT_TEST_PASSING_SANITIZE_LEAK=check mode, setting --invert-exit-code for TEST_PASSES_SANITIZE_LEAK != true" + invert_exit_code=t + fi + elif test -z "$passes_sanitize_leak" && + test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false + then + skip_all="skipping $this_test under GIT_TEST_PASSING_SANITIZE_LEAK=true" + test_done + fi + + if test_bool_env GIT_TEST_SANITIZE_LEAK_LOG false + then + if ! mkdir -p "$TEST_RESULTS_SAN_DIR" + then + BAIL_OUT "cannot create $TEST_RESULTS_SAN_DIR" + fi && + TEST_RESULTS_SAN_FILE="$TEST_RESULTS_SAN_DIR/$TEST_RESULTS_SAN_FILE_PFX" + + # In case "test-results" is left over from a previous + # run: Only report if new leaks show up. + TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP=$(nr_san_dir_leaks_) + + # Don't litter *.leak dirs if there was nothing to report + test_atexit "rmdir \"$TEST_RESULTS_SAN_DIR\" 2>/dev/null || :" + + prepend_var LSAN_OPTIONS : dedup_token_length=9999 + prepend_var LSAN_OPTIONS : log_exe_name=1 + prepend_var LSAN_OPTIONS : log_path=\"$TEST_RESULTS_SAN_FILE\" + export LSAN_OPTIONS + fi +elif test "$GIT_TEST_PASSING_SANITIZE_LEAK" = "check" || + test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false +then + BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK "GIT_TEST_PASSING_SANITIZE_LEAK=true" +elif test_bool_env GIT_TEST_SANITIZE_LEAK_LOG false +then + BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK "GIT_TEST_SANITIZE_LEAK_LOG=true" +fi + +if test "${GIT_TEST_CHAIN_LINT:-1}" != 0 && + test "${GIT_TEST_EXT_CHAIN_LINT:-1}" != 0 +then + "$PERL_PATH" "$TEST_DIRECTORY/chainlint.pl" "$0" || + BUG "lint error (see '?!...!? annotations above)" +fi + +# Last-minute variable setup +USER_HOME="$HOME" +HOME="$TRASH_DIRECTORY" +GNUPGHOME="$HOME/gnupg-home-not-used" +export HOME GNUPGHOME USER_HOME + +# "rm -rf" existing trash directory, even if a previous run left it +# with bad permissions. +remove_trash_directory () { + dir="$1" + if ! rm -rf "$dir" 2>/dev/null + then + chmod -R u+rwx "$dir" + rm -rf "$dir" + fi + ! test -d "$dir" +} + +# Test repository +remove_trash_directory "$TRASH_DIRECTORY" || { + BAIL_OUT 'cannot prepare test area' +} + +remove_trash=t +if test -z "$TEST_NO_CREATE_REPO" +then + git init \ + ${TEST_CREATE_REPO_NO_TEMPLATE:+--template=} \ + "$TRASH_DIRECTORY" >&3 2>&4 || + error "cannot run git init" +else + mkdir -p "$TRASH_DIRECTORY" +fi + +# Use -P to resolve symlinks in our working directory so that the cwd +# in subprocesses like git equals our $PWD (for pathname comparisons). +cd -P "$TRASH_DIRECTORY" || BAIL_OUT "cannot cd -P to \"$TRASH_DIRECTORY\"" + +start_test_output "$0" + +# Convenience +# A regexp to match 5 and 35 hexdigits +_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' +_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" + +test_oid_init + +ZERO_OID=$(test_oid zero) +OID_REGEX=$(echo $ZERO_OID | sed -e 's/0/[0-9a-f]/g') +OIDPATH_REGEX=$(test_oid_to_path $ZERO_OID | sed -e 's/0/[0-9a-f]/g') +EMPTY_TREE=$(test_oid empty_tree) +EMPTY_BLOB=$(test_oid empty_blob) + +# Provide an implementation of the 'yes' utility; the upper bound +# limit is there to help Windows that cannot stop this loop from +# wasting cycles when the downstream stops reading, so do not be +# tempted to turn it into an infinite loop. cf. 6129c930 ("test-lib: +# limit the output of the yes utility", 2016-02-02) +yes () { + if test $# = 0 + then + y=y + else + y="$*" + fi + + i=0 + while test $i -lt 99 + do + echo "$y" + i=$(($i+1)) + done +} + +# The GIT_TEST_FAIL_PREREQS code hooks into test_set_prereq(), and +# thus needs to be set up really early, and set an internal variable +# for convenience so the hot test_set_prereq() codepath doesn't need +# to call "test-tool env-helper" (via test_bool_env). Only do that work +# if needed by seeing if GIT_TEST_FAIL_PREREQS is set at all. +GIT_TEST_FAIL_PREREQS_INTERNAL= +if test -n "$GIT_TEST_FAIL_PREREQS" +then + if test_bool_env GIT_TEST_FAIL_PREREQS false + then + GIT_TEST_FAIL_PREREQS_INTERNAL=true + test_set_prereq FAIL_PREREQS + fi +else + test_lazy_prereq FAIL_PREREQS ' + test_bool_env GIT_TEST_FAIL_PREREQS false + ' +fi + +# Fix some commands on Windows, and other OS-specific things +uname_s=$(uname -s) +case $uname_s in +*MINGW*) + # Windows has its own (incompatible) sort and find + sort () { + /usr/bin/sort "$@" + } + find () { + /usr/bin/find "$@" + } + # git sees Windows-style pwd + pwd () { + builtin pwd -W + } + # no POSIX permissions + # backslashes in pathspec are converted to '/' + # exec does not inherit the PID + test_set_prereq MINGW + test_set_prereq NATIVE_CRLF + test_set_prereq SED_STRIPS_CR + test_set_prereq GREP_STRIPS_CR + test_set_prereq WINDOWS + GIT_TEST_CMP="GIT_DIR=/dev/null git diff --no-index --ignore-cr-at-eol --" + ;; +*CYGWIN*) + test_set_prereq POSIXPERM + test_set_prereq EXECKEEPSPID + test_set_prereq CYGWIN + test_set_prereq SED_STRIPS_CR + test_set_prereq GREP_STRIPS_CR + test_set_prereq WINDOWS + ;; +*) + test_set_prereq POSIXPERM + test_set_prereq BSLASHPSPEC + test_set_prereq EXECKEEPSPID + ;; +esac + +# Detect arches where a few things don't work +uname_m=$(uname -m) +case $uname_m in +parisc* | hppa*) + test_set_prereq HPPA + ;; +esac + +test_set_prereq REFFILES + +( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1 +test -z "$NO_CURL" && test_set_prereq LIBCURL +test -z "$NO_PERL" && test_set_prereq PERL +test -z "$NO_PTHREADS" && test_set_prereq PTHREADS +test -z "$NO_PYTHON" && test_set_prereq PYTHON +test -n "$USE_LIBPCRE2" && test_set_prereq PCRE +test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 +test -z "$NO_GETTEXT" && test_set_prereq GETTEXT +test -n "$SANITIZE_LEAK" && test_set_prereq SANITIZE_LEAK +test -n "$GIT_VALGRIND_ENABLED" && test_set_prereq VALGRIND + +if test -z "$GIT_TEST_CHECK_CACHE_TREE" +then + GIT_TEST_CHECK_CACHE_TREE=true + export GIT_TEST_CHECK_CACHE_TREE +fi + +test_lazy_prereq PIPE ' + # test whether the filesystem supports FIFOs + test_have_prereq !MINGW,!CYGWIN && + rm -f testfifo && mkfifo testfifo +' + +test_lazy_prereq SYMLINKS ' + # test whether the filesystem supports symbolic links + ln -s x y && test -h y +' + +test_lazy_prereq SYMLINKS_WINDOWS ' + # test whether symbolic links are enabled on Windows + test_have_prereq MINGW && + cmd //c "mklink y x" &> /dev/null && test -h y +' + +test_lazy_prereq FILEMODE ' + test "$(git config --bool core.filemode)" = true +' + +test_lazy_prereq CASE_INSENSITIVE_FS ' + echo good >CamelCase && + echo bad >camelcase && + test "$(cat CamelCase)" != good +' + +test_lazy_prereq FUNNYNAMES ' + test_have_prereq !MINGW && + touch -- \ + "FUNNYNAMES tab embedded" \ + "FUNNYNAMES \"quote embedded\"" \ + "FUNNYNAMES newline +embedded" 2>/dev/null && + rm -- \ + "FUNNYNAMES tab embedded" \ + "FUNNYNAMES \"quote embedded\"" \ + "FUNNYNAMES newline +embedded" 2>/dev/null +' + +test_lazy_prereq UTF8_NFD_TO_NFC ' + # check whether FS converts nfd unicode to nfc + auml=$(printf "\303\244") + aumlcdiar=$(printf "\141\314\210") + >"$auml" && + test -f "$aumlcdiar" +' + +test_lazy_prereq AUTOIDENT ' + sane_unset GIT_AUTHOR_NAME && + sane_unset GIT_AUTHOR_EMAIL && + git var GIT_AUTHOR_IDENT +' + +test_lazy_prereq EXPENSIVE ' + test -n "$GIT_TEST_LONG" +' + +test_lazy_prereq EXPENSIVE_ON_WINDOWS ' + test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN +' + +test_lazy_prereq USR_BIN_TIME ' + test -x /usr/bin/time +' + +test_lazy_prereq NOT_ROOT ' + uid=$(id -u) && + test "$uid" != 0 +' + +test_lazy_prereq JGIT ' + jgit --version +' + +# SANITY is about "can you correctly predict what the filesystem would +# do by only looking at the permission bits of the files and +# directories?" A typical example of !SANITY is running the test +# suite as root, where a test may expect "chmod -r file && cat file" +# to fail because file is supposed to be unreadable after a successful +# chmod. In an environment (i.e. combination of what filesystem is +# being used and who is running the tests) that lacks SANITY, you may +# be able to delete or create a file when the containing directory +# doesn't have write permissions, or access a file even if the +# containing directory doesn't have read or execute permissions. + +test_lazy_prereq SANITY ' + mkdir SANETESTD.1 SANETESTD.2 && + + chmod +w SANETESTD.1 SANETESTD.2 && + >SANETESTD.1/x 2>SANETESTD.2/x && + chmod -w SANETESTD.1 && + chmod -r SANETESTD.1/x && + chmod -rx SANETESTD.2 || + BUG "cannot prepare SANETESTD" + + ! test -r SANETESTD.1/x && + ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x + status=$? + + chmod +rwx SANETESTD.1 SANETESTD.2 && + rm -rf SANETESTD.1 SANETESTD.2 || + BUG "cannot clean SANETESTD" + return $status +' + +test FreeBSD != $uname_s || GIT_UNZIP=${GIT_UNZIP:-/usr/local/bin/unzip} +GIT_UNZIP=${GIT_UNZIP:-unzip} +test_lazy_prereq UNZIP ' + "$GIT_UNZIP" -v + test $? -ne 127 +' + +run_with_limited_cmdline () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq CMDLINE_LIMIT ' + test_have_prereq !HPPA,!MINGW,!CYGWIN && + run_with_limited_cmdline true +' + +run_with_limited_stack () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq ULIMIT_STACK_SIZE ' + test_have_prereq !HPPA,!MINGW,!CYGWIN && + run_with_limited_stack true +' + +run_with_limited_open_files () { + (ulimit -n 32 && "$@") +} + +test_lazy_prereq ULIMIT_FILE_DESCRIPTORS ' + test_have_prereq !MINGW,!CYGWIN && + run_with_limited_open_files true +' + +build_option () { + git version --build-options | + sed -ne "s/^$1: //p" +} + +test_lazy_prereq SIZE_T_IS_64BIT ' + test 8 -eq "$(build_option sizeof-size_t)" +' + +test_lazy_prereq LONG_IS_64BIT ' + test 8 -le "$(build_option sizeof-long)" +' + +test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit' +test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit' + +test_lazy_prereq CURL ' + curl --version +' + +# SHA1 is a test if the hash algorithm in use is SHA-1. This is both for tests +# which will not work with other hash algorithms and tests that work but don't +# test anything meaningful (e.g. special values which cause short collisions). +test_lazy_prereq SHA1 ' + case "$GIT_DEFAULT_HASH" in + sha1) true ;; + "") test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ;; + *) false ;; + esac +' + +# Ensure that no test accidentally triggers a Git command +# that runs the actual maintenance scheduler, affecting a user's +# system permanently. +# Tests that verify the scheduler integration must set this locally +# to avoid errors. +GIT_TEST_MAINT_SCHEDULER="none:exit 1" + +# Does this platform support `git fsmonitor--daemon` +# +test_lazy_prereq FSMONITOR_DAEMON ' + git version --build-options >output && + grep "feature: fsmonitor--daemon" output +' |