diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 1176 |
1 files changed, 1176 insertions, 0 deletions
diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..82c7441 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,1176 @@ +# Makefile.in generated by automake 1.16.3 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2020 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am - main makefile for GnuPG +# Copyright (C) 2001, 2004, 2010 Free Software Foundation, Inc. +# +# This file is part of GnuPG. +# +# GnuPG is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# GnuPG is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see <https://www.gnu.org/licenses/>. + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \ + $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/isc-posix.m4 $(top_srcdir)/m4/ksba.m4 \ + $(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/ldap.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libassuan.m4 \ + $(top_srcdir)/m4/libgcrypt.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/npth.m4 $(top_srcdir)/m4/ntbtls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \ + $(top_srcdir)/m4/socklen.m4 $(top_srcdir)/m4/sys_socket_h.m4 \ + $(top_srcdir)/m4/tar-ustar.m4 $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(docdir)" +DATA = $(dist_doc_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir distdir-am dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ + config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = m4 common regexp kbx g10 sm agent scd g13 dirmngr tools \ + po doc tests +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/build-aux/compile \ + $(top_srcdir)/build-aux/config.guess \ + $(top_srcdir)/build-aux/config.rpath \ + $(top_srcdir)/build-aux/config.sub \ + $(top_srcdir)/build-aux/install-sh \ + $(top_srcdir)/build-aux/missing \ + $(top_srcdir)/build-aux/mkinstalldirs ABOUT-NLS AUTHORS \ + COPYING ChangeLog INSTALL NEWS README THANKS TODO \ + build-aux/compile build-aux/config.guess \ + build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ + build-aux/install-sh build-aux/mdate-sh build-aux/missing \ + build-aux/mkinstalldirs build-aux/texinfo.tex +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +GZIP_ENV = --best +DIST_ARCHIVES = $(distdir).tar.bz2 +DIST_TARGETS = dist-bzip2 +# Exists only to be overridden by the user if desired. +AM_DISTCHECK_DVI_TARGET = dvi +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AWK_HEX_NUMBER_OPTION = @AWK_HEX_NUMBER_OPTION@ +BUILD_FILEVERSION = @BUILD_FILEVERSION@ +BUILD_HOSTNAME = @BUILD_HOSTNAME@ +BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ +BUILD_REVISION = @BUILD_REVISION@ +BUILD_TIMESTAMP = @BUILD_TIMESTAMP@ +BUILD_VERSION = @BUILD_VERSION@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_FOR_BUILD = @CC_FOR_BUILD@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DL_LIBS = @DL_LIBS@ +DNSLIBS = @DNSLIBS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENCFS = @ENCFS@ +EXEEXT = @EXEEXT@ +FUSERMOUNT = @FUSERMOUNT@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GNUPG_AGENT_PGM = @GNUPG_AGENT_PGM@ +GNUPG_DIRMNGR_LDAP_PGM = @GNUPG_DIRMNGR_LDAP_PGM@ +GNUPG_DIRMNGR_PGM = @GNUPG_DIRMNGR_PGM@ +GNUPG_PINENTRY_PGM = @GNUPG_PINENTRY_PGM@ +GNUPG_PROTECT_TOOL_PGM = @GNUPG_PROTECT_TOOL_PGM@ +GNUPG_SCDAEMON_PGM = @GNUPG_SCDAEMON_PGM@ +GPGKEYS_LDAP = @GPGKEYS_LDAP@ +GPGRT_CONFIG = @GPGRT_CONFIG@ +GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@ +GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@ +GPG_ERROR_LIBS = @GPG_ERROR_LIBS@ +GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@ +GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +KSBA_CFLAGS = @KSBA_CFLAGS@ +KSBA_CONFIG = @KSBA_CONFIG@ +KSBA_LIBS = @KSBA_LIBS@ +LBER_LIBS = @LBER_LIBS@ +LDAPLIBS = @LDAPLIBS@ +LDAP_CPPFLAGS = @LDAP_CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@ +LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@ +LIBASSUAN_LIBS = @LIBASSUAN_LIBS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@ +LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBREADLINE = @LIBREADLINE@ +LIBS = @LIBS@ +LIBUSB_CPPFLAGS = @LIBUSB_CPPFLAGS@ +LIBUSB_LIBS = @LIBUSB_LIBS@ +LIBUTIL_LIBS = @LIBUTIL_LIBS@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NETLIBS = @NETLIBS@ +NPTH_CFLAGS = @NPTH_CFLAGS@ +NPTH_CONFIG = @NPTH_CONFIG@ +NPTH_LIBS = @NPTH_LIBS@ +NTBTLS_CFLAGS = @NTBTLS_CFLAGS@ +NTBTLS_CONFIG = @NTBTLS_CONFIG@ +NTBTLS_LIBS = @NTBTLS_LIBS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_GT = @PACKAGE_GT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SENDMAIL = @SENDMAIL@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SHRED = @SHRED@ +SQLITE3_CFLAGS = @SQLITE3_CFLAGS@ +SQLITE3_LIBS = @SQLITE3_LIBS@ +STRIP = @STRIP@ +SYSROOT = @SYSROOT@ +SYS_SOCKET_H = @SYS_SOCKET_H@ +TAR = @TAR@ +USE_C99_CFLAGS = @USE_C99_CFLAGS@ +USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +W32SOCKLIBS = @W32SOCKLIBS@ +WINDRES = @WINDRES@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +YAT2M = @YAT2M@ +ZLIBS = @ZLIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Location of the released tarball archives. This is prefixed by +# the variable RELEASE_ARCHIVE in ~/.gnupg-autogen.rc. For example: +# RELEASE_ARCHIVE=user@host:archive/tarballs +RELEASE_ARCHIVE_SUFFIX = gnupg/v2.2 +# The variable RELEASE_SIGNKEY in ~/.gnupg-autogen.rc is used +# to specify the key for signing. For example: +# RELEASE_SIGNKEY=D8692123C4065DEA5E0F3AB5249B39D24F25E3B6 + +# Autoconf flags. +ACLOCAL_AMFLAGS = -I m4 +AM_DISTCHECK_CONFIGURE_FLAGS = --enable-gnupg-builddir-envvar \ + --enable-all-tests --enable-g13 \ + --enable-gpgtar --enable-wks-tools --disable-ntbtls + +GITLOG_TO_CHANGELOG = gitlog-to-changelog +EXTRA_DIST = build-aux/config.rpath build-aux/potomo autogen.sh autogen.rc \ + ChangeLog-2011 po/ChangeLog-2011 build-aux/ChangeLog-2011 \ + VERSION README.GIT build-aux/gitlog-to-changelog \ + COPYING.GPL2 COPYING.LGPL21 COPYING.LGPL3 \ + COPYING.CC0 COPYING.other \ + build-aux/git-log-fix build-aux/git-log-footer \ + build-aux/getswdb.sh \ + build-aux/speedo.mk \ + build-aux/speedo/zlib.pc \ + build-aux/speedo/w32/inst-options.ini \ + build-aux/speedo/w32/inst.nsi \ + build-aux/speedo/w32/pkg-copyright.txt \ + build-aux/speedo/w32/g4wihelp.c \ + build-aux/speedo/w32/pango.modules \ + build-aux/speedo/w32/gdk-pixbuf-loaders.cache \ + build-aux/speedo/w32/exdll.h \ + build-aux/speedo/w32/README.txt \ + build-aux/speedo/w32/gnupg-logo-150x57.bmp \ + build-aux/speedo/w32/gnupg-logo-164x314.bmp \ + build-aux/speedo/w32/wixlib.wxs \ + build-aux/speedo/patches/atk-1.32.0.patch \ + build-aux/speedo/patches/libiconv-1.14.patch \ + build-aux/speedo/patches/pango-1.29.4.patch \ + build-aux/speedo/patches/gpgme-1.12.0.patch \ + build-aux/speedo/patches/sqlite.patch + +DISTCLEANFILES = g10defs.h +@BUILD_GPG_FALSE@gpg = +@BUILD_GPG_TRUE@gpg = g10 +@BUILD_GPGSM_FALSE@sm = +@BUILD_GPGSM_TRUE@sm = sm +@BUILD_AGENT_FALSE@agent = +@BUILD_AGENT_TRUE@agent = agent +@BUILD_SCDAEMON_FALSE@scd = +@BUILD_SCDAEMON_TRUE@scd = scd +@BUILD_G13_FALSE@g13 = +@BUILD_G13_TRUE@g13 = g13 +@BUILD_DIRMNGR_FALSE@dirmngr = +@BUILD_DIRMNGR_TRUE@dirmngr = dirmngr +@BUILD_DOC_FALSE@doc = +@BUILD_DOC_TRUE@doc = doc +@DISABLE_TESTS_FALSE@tests = tests +@DISABLE_TESTS_TRUE@tests = +SUBDIRS = m4 common regexp kbx \ + ${gpg} ${sm} ${agent} ${scd} ${g13} ${dirmngr} \ + tools po ${doc} ${tests} + +dist_doc_DATA = README +gen_start_date = 2011-12-01T06:00:00 +TESTS_ENVIRONMENT = \ + LC_ALL=C \ + EXEEXT=$(EXEEXT) \ + PATH=$(abs_top_builddir)/tests/gpgscm:$(PATH) \ + abs_top_srcdir=$(abs_top_srcdir) \ + objdir=$(abs_top_builddir) \ + GPGSCM_PATH=$(abs_top_srcdir)/tests/gpgscm + + +# Names of to help the release target. +RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION) +RELEASE_W32_STEM_NAME = $(PACKAGE_TARNAME)-w32-$(PACKAGE_VERSION) +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-dist_docDATA: $(dist_doc_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ + done + +uninstall-dist_docDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz + $(am__post_remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-zstd: distdir + tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + *.tar.zst*) \ + zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(docdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +@HAVE_W32_SYSTEM_FALSE@install-data-hook: +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-dist_docDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-dist_docDATA + +.MAKE: $(am__recursive_targets) all install-am install-data-am \ + install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ + dist-zip dist-zstd distcheck distclean distclean-generic \ + distclean-hdr distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-hook install-dist_docDATA install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-am uninstall uninstall-am uninstall-dist_docDATA + +.PRECIOUS: Makefile + + +dist-hook: gen-ChangeLog + +distcheck-hook: + set -e; ( \ + pref="#+macro: gnupg22_" ;\ + reldate="$$(date -u +%Y-%m-%d)" ;\ + echo "$${pref}ver $(PACKAGE_VERSION)" ;\ + echo "$${pref}date $${reldate}" ;\ + list='$(DIST_ARCHIVES)'; for i in $$list; do \ + case "$$i" in *.tar.bz2) \ + echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\ + echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\ + echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\ + esac;\ + done ) | tee $(distdir).swdb + +@HAVE_W32_SYSTEM_TRUE@install-data-hook: +@HAVE_W32_SYSTEM_TRUE@ set -e; \ +@HAVE_W32_SYSTEM_TRUE@ for i in $$($(top_srcdir)/build-aux/potomo \ +@HAVE_W32_SYSTEM_TRUE@ --get-linguas $(top_srcdir)/po) ; do \ +@HAVE_W32_SYSTEM_TRUE@ $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \ +@HAVE_W32_SYSTEM_TRUE@ rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/gnupg2.mo" \ +@HAVE_W32_SYSTEM_TRUE@ 2>/dev/null || true; \ +@HAVE_W32_SYSTEM_TRUE@ $(top_srcdir)/build-aux/potomo $(top_srcdir)/po/$$i.po \ +@HAVE_W32_SYSTEM_TRUE@ "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/gnupg2.mo" ; \ +@HAVE_W32_SYSTEM_TRUE@ done +.PHONY: gen-ChangeLog +gen-ChangeLog: + if test -e $(top_srcdir)/.git; then \ + (cd $(top_srcdir) && \ + $(GITLOG_TO_CHANGELOG) --append-dot --tear-off \ + --amend=build-aux/git-log-fix \ + --since=$(gen_start_date) ) > $(distdir)/cl-t; \ + cat $(top_srcdir)/build-aux/git-log-footer >> $(distdir)/cl-t; \ + rm -f $(distdir)/ChangeLog; \ + mv $(distdir)/cl-t $(distdir)/ChangeLog; \ + fi + +stowinstall: + $(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/gnupg + +.PHONY: check-all release sign-release +check-all: + $(TESTS_ENVIRONMENT) \ + $(abs_top_builddir)/tests/gpgscm/gpgscm \ + $(abs_srcdir)/tests/run-tests.scm $(TESTFLAGS) $(TESTS) + +release: + +(set -e;\ + if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \ + echo "error: build directory must not be the source directory" >&2;\ + exit 2;\ + fi ;\ + echo "/* Build started at $$(date -uIseconds) */" ;\ + cd $(top_srcdir); \ + ./autogen.sh --force; \ + cd $(abs_top_builddir); \ + rm -rf dist; mkdir dist ; cd dist ; \ + $(abs_top_srcdir)/configure --enable-maintainer-mode; \ + $(MAKE) distcheck TESTFLAGS=--parallel; \ + $(TAR) xjf $(RELEASE_NAME).tar.bz2 ;\ + $(MAKE) -f $(RELEASE_NAME)/build-aux/speedo.mk w32-release ;\ + echo "/* Build finished at $$(date -uIseconds) */" ;\ + echo "/*" ;\ + echo " * Please run the final step interactivly:" ;\ + echo " * make sign-release" ;\ + echo " */" ;\ + ) 2>&1 | tee "$(RELEASE_NAME).buildlog" + +sign-release: + +(set -e; \ + test $$(pwd | sed 's,.*/,,') = dist || cd dist; \ + x=$$(grep '^RELEASE_ARCHIVE=' $$HOME/.gnupg-autogen.rc|cut -d= -f2);\ + if [ -z "$$x" ]; then \ + echo "error: RELEASE_ARCHIVE missing in ~/.gnupg-autogen.rc">&2; \ + exit 2;\ + fi;\ + myarchive="$$x/$(RELEASE_ARCHIVE_SUFFIX)";\ + x=$$(grep '^RELEASE_SIGNKEY=' $$HOME/.gnupg-autogen.rc|cut -d= -f2);\ + if [ -z "$$x" ]; then \ + echo "error: RELEASE_SIGNKEY missing in ~/.gnupg-autogen.rc">&2; \ + exit 2;\ + fi;\ + mysignkey="$$x";\ + release_w32_name="$(RELEASE_W32_STEM_NAME)_$$(date -u +%Y%m%d)" ;\ + files1="$(RELEASE_NAME).tar.bz2 \ + $${release_w32_name}.tar.xz \ + $${release_w32_name}.exe" ;\ + files2="$(RELEASE_NAME).tar.bz2.sig \ + $(RELEASE_NAME).swdb \ + $(RELEASE_NAME).buildlog \ + $${release_w32_name}.tar.xz.sig \ + $${release_w32_name}.exe.sig \ + $${release_w32_name}.exe.swdb" ;\ + files3="$${release_w32_name}.wixlib \ + $${release_w32_name}.wixlib.sig"; \ + $(MAKE) -f $(RELEASE_NAME)/build-aux/speedo.mk w32-sign-installer ;\ + echo "/* Signing the source tarball ..." ;\ + gpg -sbu $$mysignkey $(RELEASE_NAME).tar.bz2 ;\ + echo "/* Signing the W32 source tarball ..." ;\ + gpg -sbu $$mysignkey $${release_w32_name}.tar.xz ;\ + echo "/* Signing the W32 installer ..." ;\ + gpg -sbu $$mysignkey $${release_w32_name}.exe ;\ + echo "/* Signing the Wixlib ..." ;\ + gpg -sbu $$mysignkey $${release_w32_name}.wixlib ;\ + cat $(RELEASE_NAME).swdb >swdb.snippet;\ + echo '#+macro: gnupg22_branch STABLE-BRANCH-2-2' >>swdb.snippet;\ + cat $${release_w32_name}.exe.swdb >>swdb.snippet;\ + echo >>swdb.snippet ;\ + sha1sum $${files1} >>swdb.snippet ;\ + cat "../$(RELEASE_NAME).buildlog" swdb.snippet \ + | gzip >$(RELEASE_NAME).buildlog ;\ + echo "Release created - copying it to the archive ..." ;\ + scp -p $${files1} $${files2} $${files3} $$myarchive/ \ + || echo "/* Error copying files to the archive - ignored */" ;\ + echo '/*' ;\ + echo ' * All done; for checksums see dist/swdb.snippet' ;\ + echo ' */' ;\ + ) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |