# Makefile.in generated by automake 1.16.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2020 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright (C) 2002, 2004 Free Software Foundation, Inc.
#
# This file is part of GnuPG.
#
# GnuPG is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GnuPG is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
# cmacros.am - C macro definitions
# Copyright (C) 2004 Free Software Foundation, Inc.
#
# This file is part of GnuPG.
#
# GnuPG is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GnuPG is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@HAVE_DOSISH_SYSTEM_FALSE@am__append_1 = -DGNUPG_BINDIR="\"$(bindir)\"" \
@HAVE_DOSISH_SYSTEM_FALSE@ -DGNUPG_LIBEXECDIR="\"$(libexecdir)\"" \
@HAVE_DOSISH_SYSTEM_FALSE@ -DGNUPG_LIBDIR="\"$(libdir)/@PACKAGE@\"" \
@HAVE_DOSISH_SYSTEM_FALSE@ -DGNUPG_DATADIR="\"$(datadir)/@PACKAGE@\"" \
@HAVE_DOSISH_SYSTEM_FALSE@ -DGNUPG_SYSCONFDIR="\"$(sysconfdir)/@PACKAGE@\"" \
@HAVE_DOSISH_SYSTEM_FALSE@ -DGNUPG_LOCALSTATEDIR="\"$(localstatedir)\""
# If a specific protect tool program has been defined, pass its name
# to cc. Note that these macros should not be used directly but via
# the gnupg_module_name function.
@GNUPG_AGENT_PGM_TRUE@am__append_2 = -DGNUPG_DEFAULT_AGENT="\"@GNUPG_AGENT_PGM@\""
@GNUPG_PINENTRY_PGM_TRUE@am__append_3 = -DGNUPG_DEFAULT_PINENTRY="\"@GNUPG_PINENTRY_PGM@\""
@GNUPG_SCDAEMON_PGM_TRUE@am__append_4 = -DGNUPG_DEFAULT_SCDAEMON="\"@GNUPG_SCDAEMON_PGM@\""
@GNUPG_DIRMNGR_PGM_TRUE@am__append_5 = -DGNUPG_DEFAULT_DIRMNGR="\"@GNUPG_DIRMNGR_PGM@\""
@GNUPG_PROTECT_TOOL_PGM_TRUE@am__append_6 = -DGNUPG_DEFAULT_PROTECT_TOOL="\"@GNUPG_PROTECT_TOOL_PGM@\""
@GNUPG_DIRMNGR_LDAP_PGM_TRUE@am__append_7 = -DGNUPG_DEFAULT_DIRMNGR_LDAP="\"@GNUPG_DIRMNGR_LDAP_PGM@\""
@USE_GPG2_HACK_TRUE@am__append_8 = gpg2.1 gpgv2.1
@USE_GPG2_HACK_FALSE@am__append_9 = gpg.1 gpgv.1
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
$(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/iconv.m4 \
$(top_srcdir)/m4/isc-posix.m4 $(top_srcdir)/m4/ksba.m4 \
$(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/ldap.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libassuan.m4 \
$(top_srcdir)/m4/libgcrypt.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/npth.m4 $(top_srcdir)/m4/ntbtls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
$(top_srcdir)/m4/socklen.m4 $(top_srcdir)/m4/sys_socket_h.m4 \
$(top_srcdir)/m4/tar-ustar.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(dist_pkgdata_DATA) \
$(nobase_dist_doc_DATA) $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
INFO_DEPS = $(srcdir)/gnupg.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = gnupg.dvi
PDFS = gnupg.pdf
PSS = gnupg.ps
HTMLS = gnupg.html
TEXINFOS = gnupg.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
"$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" \
"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(docdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man1dir = $(mandir)/man1
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
DATA = $(dist_pkgdata_DATA) $(nobase_dist_doc_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(gnupg_TEXINFOS) $(srcdir)/Makefile.in \
$(top_srcdir)/am/cmacros.am \
$(top_srcdir)/build-aux/mkinstalldirs \
$(top_srcdir)/build-aux/texinfo.tex
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
AWK_HEX_NUMBER_OPTION = @AWK_HEX_NUMBER_OPTION@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_HOSTNAME = @BUILD_HOSTNAME@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
BUILD_REVISION = @BUILD_REVISION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
BUILD_VERSION = @BUILD_VERSION@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DL_LIBS = @DL_LIBS@
DNSLIBS = @DNSLIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENCFS = @ENCFS@
EXEEXT = @EXEEXT@
FUSERMOUNT = @FUSERMOUNT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNUPG_AGENT_PGM = @GNUPG_AGENT_PGM@
GNUPG_DIRMNGR_LDAP_PGM = @GNUPG_DIRMNGR_LDAP_PGM@
GNUPG_DIRMNGR_PGM = @GNUPG_DIRMNGR_PGM@
GNUPG_PINENTRY_PGM = @GNUPG_PINENTRY_PGM@
GNUPG_PROTECT_TOOL_PGM = @GNUPG_PROTECT_TOOL_PGM@
GNUPG_SCDAEMON_PGM = @GNUPG_SCDAEMON_PGM@
GPGKEYS_LDAP = @GPGKEYS_LDAP@
GPGRT_CONFIG = @GPGRT_CONFIG@
GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KSBA_CFLAGS = @KSBA_CFLAGS@
KSBA_CONFIG = @KSBA_CONFIG@
KSBA_LIBS = @KSBA_LIBS@
LBER_LIBS = @LBER_LIBS@
LDAPLIBS = @LDAPLIBS@
LDAP_CPPFLAGS = @LDAP_CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@
LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@
LIBASSUAN_LIBS = @LIBASSUAN_LIBS@
LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@
LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBUSB_CPPFLAGS = @LIBUSB_CPPFLAGS@
LIBUSB_LIBS = @LIBUSB_LIBS@
LIBUTIL_LIBS = @LIBUTIL_LIBS@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NETLIBS = @NETLIBS@
NPTH_CFLAGS = @NPTH_CFLAGS@
NPTH_CONFIG = @NPTH_CONFIG@
NPTH_LIBS = @NPTH_LIBS@
NTBTLS_CFLAGS = @NTBTLS_CFLAGS@
NTBTLS_CONFIG = @NTBTLS_CONFIG@
NTBTLS_LIBS = @NTBTLS_LIBS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_GT = @PACKAGE_GT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
RANLIB = @RANLIB@
SENDMAIL = @SENDMAIL@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHRED = @SHRED@
SQLITE3_CFLAGS = @SQLITE3_CFLAGS@
SQLITE3_LIBS = @SQLITE3_LIBS@
STRIP = @STRIP@
SYSROOT = @SYSROOT@
SYS_SOCKET_H = @SYS_SOCKET_H@
TAR = @TAR@
USE_C99_CFLAGS = @USE_C99_CFLAGS@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
W32SOCKLIBS = @W32SOCKLIBS@
WINDRES = @WINDRES@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
YAT2M = @YAT2M@
ZLIBS = @ZLIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = $(datadir)/locale
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# NB: AM_CFLAGS may also be used by tools running on the build
# platform to create source files.
AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(am__append_1) \
$(am__append_2) $(am__append_3) $(am__append_4) \
$(am__append_5) $(am__append_6) $(am__append_7)
@HAVE_W32CE_SYSTEM_FALSE@extra_sys_libs =
# Under Windows we use LockFileEx. WindowsCE provides this only on
# the WindowsMobile 6 platform and thus we need to use the coredll6
# import library. We also want to use a stacksize of 256k instead of
# the 2MB which is the default with cegcc. 256k is the largest stack
# we use with pth.
@HAVE_W32CE_SYSTEM_TRUE@extra_sys_libs = -lcoredll6
@HAVE_W32CE_SYSTEM_FALSE@extra_bin_ldflags =
@HAVE_W32CE_SYSTEM_TRUE@extra_bin_ldflags = -Wl,--stack=0x40000
resource_objs =
# Convenience macros
libcommon = ../common/libcommon.a
libcommonpth = ../common/libcommonpth.a
libcommontls = ../common/libcommontls.a
libcommontlsnpth = ../common/libcommontlsnpth.a
examples = examples/README examples/scd-event examples/trustlist.txt \
examples/VS-NfD.prf examples/Automatic.prf \
examples/debug.prf \
examples/gpgconf.rnames examples/gpgconf.conf \
examples/systemd-user/README \
examples/systemd-user/dirmngr.service \
examples/systemd-user/dirmngr.socket \
examples/systemd-user/gpg-agent.service \
examples/systemd-user/gpg-agent.socket \
examples/systemd-user/gpg-agent-ssh.socket \
examples/systemd-user/gpg-agent-browser.socket \
examples/systemd-user/gpg-agent-extra.socket \
examples/pwpattern.list
helpfiles = help.txt help.be.txt help.ca.txt help.cs.txt \
help.da.txt help.de.txt help.el.txt help.eo.txt \
help.es.txt help.et.txt help.fi.txt help.fr.txt \
help.gl.txt help.hu.txt help.id.txt help.it.txt \
help.ja.txt help.nb.txt help.pl.txt help.pt.txt \
help.pt_BR.txt help.ro.txt help.ru.txt help.sk.txt \
help.sv.txt help.tr.txt help.zh_CN.txt help.zh_TW.txt
profiles =
EXTRA_DIST = samplekeys.asc mksamplekeys com-certs.pem qualified.txt \
gnupg-logo.eps gnupg-logo.pdf gnupg-logo.png gnupg-logo-tr.png \
gnupg-module-overview.png gnupg-module-overview.pdf \
gnupg-card-architecture.png gnupg-card-architecture.pdf \
FAQ gnupg7.texi mkdefsinc.c defsincdate \
opt-homedir.texi see-also-note.texi specify-user-id.texi \
gpgv.texi yat2m.c ChangeLog-2011 whats-new-in-2.1.txt \
trust-values.texi
BUILT_SOURCES = gnupg-module-overview.png gnupg-module-overview.pdf \
gnupg-card-architecture.png gnupg-card-architecture.pdf \
defsincdate defs.inc
info_TEXINFOS = gnupg.texi
dist_pkgdata_DATA = $(helpfiles) $(profiles)
nobase_dist_doc_DATA = FAQ DETAILS HACKING DCO TRANSLATE OpenPGP KEYSERVER \
$(examples)
#dist_html_DATA =
gnupg_TEXINFOS = \
gpg.texi gpgsm.texi gpg-agent.texi scdaemon.texi instguide.texi \
tools.texi debugging.texi glossary.texi contrib.texi gpl.texi \
sysnotes.texi dirmngr.texi wks.texi \
gnupg-module-overview.svg \
gnupg-card-architecture.fig \
howtos.texi howto-create-a-server-cert.texi
DVIPS = TEXINPUTS="$(srcdir)$(PATH_SEPARATOR)$$TEXINPUTS" dvips
AM_MAKEINFOFLAGS = -I $(srcdir) --css-ref=/share/site.css
YAT2M_OPTIONS = -I $(srcdir) \
--release "GnuPG @PACKAGE_VERSION@" --source "GNU Privacy Guard 2.2"
myman_sources = gnupg7.texi gpg.texi gpgsm.texi gpg-agent.texi \
dirmngr.texi scdaemon.texi tools.texi wks.texi
myman_pages = gpgsm.1 gpg-agent.1 dirmngr.8 scdaemon.1 watchgnupg.1 \
gpgconf.1 addgnupghome.8 gpg-preset-passphrase.1 \
gpg-connect-agent.1 gpgparsemail.1 gpgtar.1 \
gpg-check-pattern.1 applygnupgdefaults.8 gpg-wks-client.1 \
gpg-wks-server.1 dirmngr-client.1 $(am__append_8) \
$(am__append_9)
man_MANS = $(myman_pages) gnupg.7
watchgnupg_SOURCE = gnupg.texi
CLEANFILES = yat2m mkdefsinc defs.inc
DISTCLEANFILES = gnupg.tmp gnupg.ops yat2m-stamp.tmp yat2m-stamp \
gnupg-card-architecture.eps \
gnupg-module-overview.eps \
$(myman_pages) gnupg.7
@HAVE_YAT2M_FALSE@YAT2M_CMD = ./yat2m
@HAVE_YAT2M_TRUE@YAT2M_CMD = $(YAT2M)
@HAVE_YAT2M_FALSE@YAT2M_DEP = yat2m
@HAVE_YAT2M_TRUE@YAT2M_DEP = $(YAT2M)
all: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .dvi .eps .fig .html .info .jpg .o .pdf .png .ps .rc .svg .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/am/cmacros.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_srcdir)/am/cmacros.am $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
.texi.info:
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
$<
.texi.pdf:
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
$<
.texi.html:
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
$(srcdir)/gnupg.info: gnupg.texi $(gnupg_TEXINFOS)
gnupg.pdf: gnupg.texi $(gnupg_TEXINFOS)
gnupg.html: gnupg.texi $(gnupg_TEXINFOS)
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf gnupg.t2d gnupg.t2p
clean-aminfo:
-test -z "gnupg.dvi gnupg.pdf gnupg.ps gnupg.html" \
|| rm -rf gnupg.dvi gnupg.pdf gnupg.ps gnupg.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
install-man1: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man7: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man7dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.7[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
done; }
uninstall-man7:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man7dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.7[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.8[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
done
uninstall-dist_pkgdataDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nobase_dist_docDATA: $(nobase_dist_doc_DATA)
@$(NORMAL_INSTALL)
@list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
fi; \
$(am__nobase_list) | while read dir files; do \
xfiles=; for file in $$files; do \
if test -f "$$file"; then xfiles="$$xfiles $$file"; \
else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
test -z "$$xfiles" || { \
test "x$$dir" = x. || { \
echo " $(MKDIR_P) '$(DESTDIR)$(docdir)/$$dir'"; \
$(MKDIR_P) "$(DESTDIR)$(docdir)/$$dir"; }; \
echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(docdir)/$$dir'"; \
$(INSTALL_DATA) $$xfiles "$(DESTDIR)$(docdir)/$$dir" || exit $$?; }; \
done
uninstall-nobase_dist_docDATA:
@$(NORMAL_UNINSTALL)
@list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \
$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info dist-hook
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(INFO_DEPS) $(MANS) $(DATA)
installdirs:
for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(docdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am
clean-am: clean-aminfo clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-dist_pkgdataDATA install-info-am install-man \
install-nobase_dist_docDATA
install-dvi: install-dvi-am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man1 install-man7 install-man8
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-dist_pkgdataDATA uninstall-dvi-am \
uninstall-html-am uninstall-info-am uninstall-man \
uninstall-nobase_dist_docDATA uninstall-pdf-am uninstall-ps-am
uninstall-man: uninstall-man1 uninstall-man7 uninstall-man8
.MAKE: all check install install-am install-exec install-strip
.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
cscopelist-am ctags-am dist-hook dist-info distclean \
distclean-generic distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-dist_pkgdataDATA install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-man1 \
install-man7 install-man8 install-nobase_dist_docDATA \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic mostlyclean mostlyclean-aminfo \
mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am uninstall-dist_pkgdataDATA uninstall-dvi-am \
uninstall-html-am uninstall-info-am uninstall-man \
uninstall-man1 uninstall-man7 uninstall-man8 \
uninstall-nobase_dist_docDATA uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
@HAVE_W32_SYSTEM_TRUE@.rc.o:
@HAVE_W32_SYSTEM_TRUE@ $(WINDRES) $(DEFAULT_INCLUDES) $(INCLUDES) "$<" "$@"
gnupg.texi : defs.inc
# We need EPS files for "make distcheck" but we do not want to distribute
# them due to their size. Let's build them as needed.
gnupg.dvi : gnupg-module-overview.eps gnupg-card-architecture.eps
@HAVE_YAT2M_FALSE@yat2m: yat2m.c
@HAVE_YAT2M_FALSE@ $(CC_FOR_BUILD) -o $@ $(srcdir)/yat2m.c
mkdefsinc: mkdefsinc.c Makefile ../config.h
$(CC_FOR_BUILD) -I. -I.. -I$(srcdir) $(AM_CPPFLAGS) \
-o $@ $(srcdir)/mkdefsinc.c
.svg.eps:
convert `test -f '$<' || echo '$(srcdir)/'`$< $@
.svg.png:
convert `test -f '$<' || echo '$(srcdir)/'`$< $@
.svg.pdf:
convert `test -f '$<' || echo '$(srcdir)/'`$< $@
.fig.png:
fig2dev -L png `test -f '$<' || echo '$(srcdir)/'`$< $@
.fig.jpg:
fig2dev -L jpeg `test -f '$<' || echo '$(srcdir)/'`$< $@
.fig.eps:
fig2dev -L eps `test -f '$<' || echo '$(srcdir)/'`$< $@
.fig.pdf:
fig2dev -L pdf `test -f '$<' || echo '$(srcdir)/'`$< $@
yat2m-stamp: $(myman_sources) defs.inc
@rm -f yat2m-stamp.tmp
@touch yat2m-stamp.tmp
incd="`test -f defsincdate || echo '$(srcdir)/'`defsincdate"; \
for file in $(myman_sources) ; do \
$(YAT2M_CMD) $(YAT2M_OPTIONS) --store \
--date "`cat $$incd 2>/dev/null`" \
`test -f '$$file' || echo '$(srcdir)/'`$$file ; done
@mv -f yat2m-stamp.tmp $@
yat2m-stamp: $(YAT2M_DEP)
$(myman_pages) gnupg.7 : yat2m-stamp defs.inc
@if test -f $@; then :; else \
trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \
if mkdir yat2m-lock 2>/dev/null; then \
rm -f yat2m-stamp; \
$(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \
rmdir yat2m-lock; \
else \
while test -d yat2m-lock; do sleep 1; done; \
test -f yat2m-stamp; exit $$?; \
fi; \
fi
dist-hook: defsincdate
defsincdate: $(gnupg_TEXINFOS)
: >defsincdate ; \
if test -e $(top_srcdir)/.git; then \
(cd $(srcdir) && git log -1 --format='%ct' \
-- $(gnupg_TEXINFOS) 2>/dev/null) >>defsincdate; \
elif test x"$$SOURCE_DATE_EPOCH" != x; then \
echo "$$SOURCE_DATE_EPOCH" >>defsincdate ; \
fi
defs.inc : defsincdate Makefile mkdefsinc
incd="`test -f defsincdate || echo '$(srcdir)/'`defsincdate"; \
./mkdefsinc -C $(srcdir) --date "`cat $$incd 2>/dev/null`" \
$(gnupg_TEXINFOS) >$@
online: gnupg.html gnupg.pdf gnupg-module-overview.png \
gnupg-card-architecture.png
set -e; \
echo "Uploading current manuals to www.gnupg.org ..."; \
cp $(srcdir)/gnupg-logo-tr.png gnupg.html/; \
cp gnupg-module-overview.png gnupg.html/; \
cp gnupg-card-architecture.png gnupg.html/; \
user=werner ; webhost="ftp.gnupg.org" ; dashdevel="" ; \
if echo "@PACKAGE_VERSION@" | grep -- "-beta" >/dev/null; then \
dashdevel="-devel" ; \
else \
rsync -v gnupg.pdf $${user}@$${webhost}:webspace/manuals/ ; \
fi ; \
cd gnupg.html ; \
rsync -vr --exclude='.git' . \
$${user}@$${webhost}:webspace/manuals/gnupg$${dashdevel}/
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: