diff options
Diffstat (limited to 'src/compress/flate')
67 files changed, 5848 insertions, 0 deletions
diff --git a/src/compress/flate/deflate.go b/src/compress/flate/deflate.go new file mode 100644 index 0000000..b53764b --- /dev/null +++ b/src/compress/flate/deflate.go @@ -0,0 +1,746 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "errors" + "fmt" + "io" + "math" +) + +const ( + NoCompression = 0 + BestSpeed = 1 + BestCompression = 9 + DefaultCompression = -1 + + // HuffmanOnly disables Lempel-Ziv match searching and only performs Huffman + // entropy encoding. This mode is useful in compressing data that has + // already been compressed with an LZ style algorithm (e.g. Snappy or LZ4) + // that lacks an entropy encoder. Compression gains are achieved when + // certain bytes in the input stream occur more frequently than others. + // + // Note that HuffmanOnly produces a compressed output that is + // RFC 1951 compliant. That is, any valid DEFLATE decompressor will + // continue to be able to decompress this output. + HuffmanOnly = -2 +) + +const ( + logWindowSize = 15 + windowSize = 1 << logWindowSize + windowMask = windowSize - 1 + + // The LZ77 step produces a sequence of literal tokens and <length, offset> + // pair tokens. The offset is also known as distance. The underlying wire + // format limits the range of lengths and offsets. For example, there are + // 256 legitimate lengths: those in the range [3, 258]. This package's + // compressor uses a higher minimum match length, enabling optimizations + // such as finding matches via 32-bit loads and compares. + baseMatchLength = 3 // The smallest match length per the RFC section 3.2.5 + minMatchLength = 4 // The smallest match length that the compressor actually emits + maxMatchLength = 258 // The largest match length + baseMatchOffset = 1 // The smallest match offset + maxMatchOffset = 1 << 15 // The largest match offset + + // The maximum number of tokens we put into a single flate block, just to + // stop things from getting too large. + maxFlateBlockTokens = 1 << 14 + maxStoreBlockSize = 65535 + hashBits = 17 // After 17 performance degrades + hashSize = 1 << hashBits + hashMask = (1 << hashBits) - 1 + maxHashOffset = 1 << 24 + + skipNever = math.MaxInt32 +) + +type compressionLevel struct { + level, good, lazy, nice, chain, fastSkipHashing int +} + +var levels = []compressionLevel{ + {0, 0, 0, 0, 0, 0}, // NoCompression. + {1, 0, 0, 0, 0, 0}, // BestSpeed uses a custom algorithm; see deflatefast.go. + // For levels 2-3 we don't bother trying with lazy matches. + {2, 4, 0, 16, 8, 5}, + {3, 4, 0, 32, 32, 6}, + // Levels 4-9 use increasingly more lazy matching + // and increasingly stringent conditions for "good enough". + {4, 4, 4, 16, 16, skipNever}, + {5, 8, 16, 32, 32, skipNever}, + {6, 8, 16, 128, 128, skipNever}, + {7, 8, 32, 128, 256, skipNever}, + {8, 32, 128, 258, 1024, skipNever}, + {9, 32, 258, 258, 4096, skipNever}, +} + +type compressor struct { + compressionLevel + + w *huffmanBitWriter + bulkHasher func([]byte, []uint32) + + // compression algorithm + fill func(*compressor, []byte) int // copy data to window + step func(*compressor) // process window + sync bool // requesting flush + bestSpeed *deflateFast // Encoder for BestSpeed + + // Input hash chains + // hashHead[hashValue] contains the largest inputIndex with the specified hash value + // If hashHead[hashValue] is within the current window, then + // hashPrev[hashHead[hashValue] & windowMask] contains the previous index + // with the same hash value. + chainHead int + hashHead [hashSize]uint32 + hashPrev [windowSize]uint32 + hashOffset int + + // input window: unprocessed data is window[index:windowEnd] + index int + window []byte + windowEnd int + blockStart int // window index where current tokens start + byteAvailable bool // if true, still need to process window[index-1]. + + // queued output tokens + tokens []token + + // deflate state + length int + offset int + maxInsertIndex int + err error + + // hashMatch must be able to contain hashes for the maximum match length. + hashMatch [maxMatchLength - 1]uint32 +} + +func (d *compressor) fillDeflate(b []byte) int { + if d.index >= 2*windowSize-(minMatchLength+maxMatchLength) { + // shift the window by windowSize + copy(d.window, d.window[windowSize:2*windowSize]) + d.index -= windowSize + d.windowEnd -= windowSize + if d.blockStart >= windowSize { + d.blockStart -= windowSize + } else { + d.blockStart = math.MaxInt32 + } + d.hashOffset += windowSize + if d.hashOffset > maxHashOffset { + delta := d.hashOffset - 1 + d.hashOffset -= delta + d.chainHead -= delta + + // Iterate over slices instead of arrays to avoid copying + // the entire table onto the stack (Issue #18625). + for i, v := range d.hashPrev[:] { + if int(v) > delta { + d.hashPrev[i] = uint32(int(v) - delta) + } else { + d.hashPrev[i] = 0 + } + } + for i, v := range d.hashHead[:] { + if int(v) > delta { + d.hashHead[i] = uint32(int(v) - delta) + } else { + d.hashHead[i] = 0 + } + } + } + } + n := copy(d.window[d.windowEnd:], b) + d.windowEnd += n + return n +} + +func (d *compressor) writeBlock(tokens []token, index int) error { + if index > 0 { + var window []byte + if d.blockStart <= index { + window = d.window[d.blockStart:index] + } + d.blockStart = index + d.w.writeBlock(tokens, false, window) + return d.w.err + } + return nil +} + +// fillWindow will fill the current window with the supplied +// dictionary and calculate all hashes. +// This is much faster than doing a full encode. +// Should only be used after a reset. +func (d *compressor) fillWindow(b []byte) { + // Do not fill window if we are in store-only mode. + if d.compressionLevel.level < 2 { + return + } + if d.index != 0 || d.windowEnd != 0 { + panic("internal error: fillWindow called with stale data") + } + + // If we are given too much, cut it. + if len(b) > windowSize { + b = b[len(b)-windowSize:] + } + // Add all to window. + n := copy(d.window, b) + + // Calculate 256 hashes at the time (more L1 cache hits) + loops := (n + 256 - minMatchLength) / 256 + for j := 0; j < loops; j++ { + index := j * 256 + end := index + 256 + minMatchLength - 1 + if end > n { + end = n + } + toCheck := d.window[index:end] + dstSize := len(toCheck) - minMatchLength + 1 + + if dstSize <= 0 { + continue + } + + dst := d.hashMatch[:dstSize] + d.bulkHasher(toCheck, dst) + for i, val := range dst { + di := i + index + hh := &d.hashHead[val&hashMask] + // Get previous value with the same hash. + // Our chain should point to the previous value. + d.hashPrev[di&windowMask] = *hh + // Set the head of the hash chain to us. + *hh = uint32(di + d.hashOffset) + } + } + // Update window information. + d.windowEnd = n + d.index = n +} + +// Try to find a match starting at index whose length is greater than prevSize. +// We only look at chainCount possibilities before giving up. +func (d *compressor) findMatch(pos int, prevHead int, prevLength int, lookahead int) (length, offset int, ok bool) { + minMatchLook := maxMatchLength + if lookahead < minMatchLook { + minMatchLook = lookahead + } + + win := d.window[0 : pos+minMatchLook] + + // We quit when we get a match that's at least nice long + nice := len(win) - pos + if d.nice < nice { + nice = d.nice + } + + // If we've got a match that's good enough, only look in 1/4 the chain. + tries := d.chain + length = prevLength + if length >= d.good { + tries >>= 2 + } + + wEnd := win[pos+length] + wPos := win[pos:] + minIndex := pos - windowSize + + for i := prevHead; tries > 0; tries-- { + if wEnd == win[i+length] { + n := matchLen(win[i:], wPos, minMatchLook) + + if n > length && (n > minMatchLength || pos-i <= 4096) { + length = n + offset = pos - i + ok = true + if n >= nice { + // The match is good enough that we don't try to find a better one. + break + } + wEnd = win[pos+n] + } + } + if i == minIndex { + // hashPrev[i & windowMask] has already been overwritten, so stop now. + break + } + i = int(d.hashPrev[i&windowMask]) - d.hashOffset + if i < minIndex || i < 0 { + break + } + } + return +} + +func (d *compressor) writeStoredBlock(buf []byte) error { + if d.w.writeStoredHeader(len(buf), false); d.w.err != nil { + return d.w.err + } + d.w.writeBytes(buf) + return d.w.err +} + +const hashmul = 0x1e35a7bd + +// hash4 returns a hash representation of the first 4 bytes +// of the supplied slice. +// The caller must ensure that len(b) >= 4. +func hash4(b []byte) uint32 { + return ((uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24) * hashmul) >> (32 - hashBits) +} + +// bulkHash4 will compute hashes using the same +// algorithm as hash4. +func bulkHash4(b []byte, dst []uint32) { + if len(b) < minMatchLength { + return + } + hb := uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24 + dst[0] = (hb * hashmul) >> (32 - hashBits) + end := len(b) - minMatchLength + 1 + for i := 1; i < end; i++ { + hb = (hb << 8) | uint32(b[i+3]) + dst[i] = (hb * hashmul) >> (32 - hashBits) + } +} + +// matchLen returns the number of matching bytes in a and b +// up to length 'max'. Both slices must be at least 'max' +// bytes in size. +func matchLen(a, b []byte, max int) int { + a = a[:max] + b = b[:len(a)] + for i, av := range a { + if b[i] != av { + return i + } + } + return max +} + +// encSpeed will compress and store the currently added data, +// if enough has been accumulated or we at the end of the stream. +// Any error that occurred will be in d.err +func (d *compressor) encSpeed() { + // We only compress if we have maxStoreBlockSize. + if d.windowEnd < maxStoreBlockSize { + if !d.sync { + return + } + + // Handle small sizes. + if d.windowEnd < 128 { + switch { + case d.windowEnd == 0: + return + case d.windowEnd <= 16: + d.err = d.writeStoredBlock(d.window[:d.windowEnd]) + default: + d.w.writeBlockHuff(false, d.window[:d.windowEnd]) + d.err = d.w.err + } + d.windowEnd = 0 + d.bestSpeed.reset() + return + } + + } + // Encode the block. + d.tokens = d.bestSpeed.encode(d.tokens[:0], d.window[:d.windowEnd]) + + // If we removed less than 1/16th, Huffman compress the block. + if len(d.tokens) > d.windowEnd-(d.windowEnd>>4) { + d.w.writeBlockHuff(false, d.window[:d.windowEnd]) + } else { + d.w.writeBlockDynamic(d.tokens, false, d.window[:d.windowEnd]) + } + d.err = d.w.err + d.windowEnd = 0 +} + +func (d *compressor) initDeflate() { + d.window = make([]byte, 2*windowSize) + d.hashOffset = 1 + d.tokens = make([]token, 0, maxFlateBlockTokens+1) + d.length = minMatchLength - 1 + d.offset = 0 + d.byteAvailable = false + d.index = 0 + d.chainHead = -1 + d.bulkHasher = bulkHash4 +} + +func (d *compressor) deflate() { + if d.windowEnd-d.index < minMatchLength+maxMatchLength && !d.sync { + return + } + + d.maxInsertIndex = d.windowEnd - (minMatchLength - 1) + +Loop: + for { + if d.index > d.windowEnd { + panic("index > windowEnd") + } + lookahead := d.windowEnd - d.index + if lookahead < minMatchLength+maxMatchLength { + if !d.sync { + break Loop + } + if d.index > d.windowEnd { + panic("index > windowEnd") + } + if lookahead == 0 { + // Flush current output block if any. + if d.byteAvailable { + // There is still one pending token that needs to be flushed + d.tokens = append(d.tokens, literalToken(uint32(d.window[d.index-1]))) + d.byteAvailable = false + } + if len(d.tokens) > 0 { + if d.err = d.writeBlock(d.tokens, d.index); d.err != nil { + return + } + d.tokens = d.tokens[:0] + } + break Loop + } + } + if d.index < d.maxInsertIndex { + // Update the hash + hash := hash4(d.window[d.index : d.index+minMatchLength]) + hh := &d.hashHead[hash&hashMask] + d.chainHead = int(*hh) + d.hashPrev[d.index&windowMask] = uint32(d.chainHead) + *hh = uint32(d.index + d.hashOffset) + } + prevLength := d.length + prevOffset := d.offset + d.length = minMatchLength - 1 + d.offset = 0 + minIndex := d.index - windowSize + if minIndex < 0 { + minIndex = 0 + } + + if d.chainHead-d.hashOffset >= minIndex && + (d.fastSkipHashing != skipNever && lookahead > minMatchLength-1 || + d.fastSkipHashing == skipNever && lookahead > prevLength && prevLength < d.lazy) { + if newLength, newOffset, ok := d.findMatch(d.index, d.chainHead-d.hashOffset, minMatchLength-1, lookahead); ok { + d.length = newLength + d.offset = newOffset + } + } + if d.fastSkipHashing != skipNever && d.length >= minMatchLength || + d.fastSkipHashing == skipNever && prevLength >= minMatchLength && d.length <= prevLength { + // There was a match at the previous step, and the current match is + // not better. Output the previous match. + if d.fastSkipHashing != skipNever { + d.tokens = append(d.tokens, matchToken(uint32(d.length-baseMatchLength), uint32(d.offset-baseMatchOffset))) + } else { + d.tokens = append(d.tokens, matchToken(uint32(prevLength-baseMatchLength), uint32(prevOffset-baseMatchOffset))) + } + // Insert in the hash table all strings up to the end of the match. + // index and index-1 are already inserted. If there is not enough + // lookahead, the last two strings are not inserted into the hash + // table. + if d.length <= d.fastSkipHashing { + var newIndex int + if d.fastSkipHashing != skipNever { + newIndex = d.index + d.length + } else { + newIndex = d.index + prevLength - 1 + } + index := d.index + for index++; index < newIndex; index++ { + if index < d.maxInsertIndex { + hash := hash4(d.window[index : index+minMatchLength]) + // Get previous value with the same hash. + // Our chain should point to the previous value. + hh := &d.hashHead[hash&hashMask] + d.hashPrev[index&windowMask] = *hh + // Set the head of the hash chain to us. + *hh = uint32(index + d.hashOffset) + } + } + d.index = index + + if d.fastSkipHashing == skipNever { + d.byteAvailable = false + d.length = minMatchLength - 1 + } + } else { + // For matches this long, we don't bother inserting each individual + // item into the table. + d.index += d.length + } + if len(d.tokens) == maxFlateBlockTokens { + // The block includes the current character + if d.err = d.writeBlock(d.tokens, d.index); d.err != nil { + return + } + d.tokens = d.tokens[:0] + } + } else { + if d.fastSkipHashing != skipNever || d.byteAvailable { + i := d.index - 1 + if d.fastSkipHashing != skipNever { + i = d.index + } + d.tokens = append(d.tokens, literalToken(uint32(d.window[i]))) + if len(d.tokens) == maxFlateBlockTokens { + if d.err = d.writeBlock(d.tokens, i+1); d.err != nil { + return + } + d.tokens = d.tokens[:0] + } + } + d.index++ + if d.fastSkipHashing == skipNever { + d.byteAvailable = true + } + } + } +} + +func (d *compressor) fillStore(b []byte) int { + n := copy(d.window[d.windowEnd:], b) + d.windowEnd += n + return n +} + +func (d *compressor) store() { + if d.windowEnd > 0 && (d.windowEnd == maxStoreBlockSize || d.sync) { + d.err = d.writeStoredBlock(d.window[:d.windowEnd]) + d.windowEnd = 0 + } +} + +// storeHuff compresses and stores the currently added data +// when the d.window is full or we are at the end of the stream. +// Any error that occurred will be in d.err +func (d *compressor) storeHuff() { + if d.windowEnd < len(d.window) && !d.sync || d.windowEnd == 0 { + return + } + d.w.writeBlockHuff(false, d.window[:d.windowEnd]) + d.err = d.w.err + d.windowEnd = 0 +} + +func (d *compressor) write(b []byte) (n int, err error) { + if d.err != nil { + return 0, d.err + } + n = len(b) + for len(b) > 0 { + d.step(d) + b = b[d.fill(d, b):] + if d.err != nil { + return 0, d.err + } + } + return n, nil +} + +func (d *compressor) syncFlush() error { + if d.err != nil { + return d.err + } + d.sync = true + d.step(d) + if d.err == nil { + d.w.writeStoredHeader(0, false) + d.w.flush() + d.err = d.w.err + } + d.sync = false + return d.err +} + +func (d *compressor) init(w io.Writer, level int) (err error) { + d.w = newHuffmanBitWriter(w) + + switch { + case level == NoCompression: + d.window = make([]byte, maxStoreBlockSize) + d.fill = (*compressor).fillStore + d.step = (*compressor).store + case level == HuffmanOnly: + d.window = make([]byte, maxStoreBlockSize) + d.fill = (*compressor).fillStore + d.step = (*compressor).storeHuff + case level == BestSpeed: + d.compressionLevel = levels[level] + d.window = make([]byte, maxStoreBlockSize) + d.fill = (*compressor).fillStore + d.step = (*compressor).encSpeed + d.bestSpeed = newDeflateFast() + d.tokens = make([]token, maxStoreBlockSize) + case level == DefaultCompression: + level = 6 + fallthrough + case 2 <= level && level <= 9: + d.compressionLevel = levels[level] + d.initDeflate() + d.fill = (*compressor).fillDeflate + d.step = (*compressor).deflate + default: + return fmt.Errorf("flate: invalid compression level %d: want value in range [-2, 9]", level) + } + return nil +} + +func (d *compressor) reset(w io.Writer) { + d.w.reset(w) + d.sync = false + d.err = nil + switch d.compressionLevel.level { + case NoCompression: + d.windowEnd = 0 + case BestSpeed: + d.windowEnd = 0 + d.tokens = d.tokens[:0] + d.bestSpeed.reset() + default: + d.chainHead = -1 + for i := range d.hashHead { + d.hashHead[i] = 0 + } + for i := range d.hashPrev { + d.hashPrev[i] = 0 + } + d.hashOffset = 1 + d.index, d.windowEnd = 0, 0 + d.blockStart, d.byteAvailable = 0, false + d.tokens = d.tokens[:0] + d.length = minMatchLength - 1 + d.offset = 0 + d.maxInsertIndex = 0 + } +} + +func (d *compressor) close() error { + if d.err == errWriterClosed { + return nil + } + if d.err != nil { + return d.err + } + d.sync = true + d.step(d) + if d.err != nil { + return d.err + } + if d.w.writeStoredHeader(0, true); d.w.err != nil { + return d.w.err + } + d.w.flush() + if d.w.err != nil { + return d.w.err + } + d.err = errWriterClosed + return nil +} + +// NewWriter returns a new Writer compressing data at the given level. +// Following zlib, levels range from 1 (BestSpeed) to 9 (BestCompression); +// higher levels typically run slower but compress more. Level 0 +// (NoCompression) does not attempt any compression; it only adds the +// necessary DEFLATE framing. +// Level -1 (DefaultCompression) uses the default compression level. +// Level -2 (HuffmanOnly) will use Huffman compression only, giving +// a very fast compression for all types of input, but sacrificing considerable +// compression efficiency. +// +// If level is in the range [-2, 9] then the error returned will be nil. +// Otherwise the error returned will be non-nil. +func NewWriter(w io.Writer, level int) (*Writer, error) { + var dw Writer + if err := dw.d.init(w, level); err != nil { + return nil, err + } + return &dw, nil +} + +// NewWriterDict is like NewWriter but initializes the new +// Writer with a preset dictionary. The returned Writer behaves +// as if the dictionary had been written to it without producing +// any compressed output. The compressed data written to w +// can only be decompressed by a Reader initialized with the +// same dictionary. +func NewWriterDict(w io.Writer, level int, dict []byte) (*Writer, error) { + dw := &dictWriter{w} + zw, err := NewWriter(dw, level) + if err != nil { + return nil, err + } + zw.d.fillWindow(dict) + zw.dict = append(zw.dict, dict...) // duplicate dictionary for Reset method. + return zw, err +} + +type dictWriter struct { + w io.Writer +} + +func (w *dictWriter) Write(b []byte) (n int, err error) { + return w.w.Write(b) +} + +var errWriterClosed = errors.New("flate: closed writer") + +// A Writer takes data written to it and writes the compressed +// form of that data to an underlying writer (see NewWriter). +type Writer struct { + d compressor + dict []byte +} + +// Write writes data to w, which will eventually write the +// compressed form of data to its underlying writer. +func (w *Writer) Write(data []byte) (n int, err error) { + return w.d.write(data) +} + +// Flush flushes any pending data to the underlying writer. +// It is useful mainly in compressed network protocols, to ensure that +// a remote reader has enough data to reconstruct a packet. +// Flush does not return until the data has been written. +// Calling Flush when there is no pending data still causes the Writer +// to emit a sync marker of at least 4 bytes. +// If the underlying writer returns an error, Flush returns that error. +// +// In the terminology of the zlib library, Flush is equivalent to Z_SYNC_FLUSH. +func (w *Writer) Flush() error { + // For more about flushing: + // https://www.bolet.org/~pornin/deflate-flush.html + return w.d.syncFlush() +} + +// Close flushes and closes the writer. +func (w *Writer) Close() error { + return w.d.close() +} + +// Reset discards the writer's state and makes it equivalent to +// the result of NewWriter or NewWriterDict called with dst +// and w's level and dictionary. +func (w *Writer) Reset(dst io.Writer) { + if dw, ok := w.d.w.writer.(*dictWriter); ok { + // w was created with NewWriterDict + dw.w = dst + w.d.reset(dw) + w.d.fillWindow(w.dict) + } else { + // w was created with NewWriter + w.d.reset(dst) + } +} diff --git a/src/compress/flate/deflate_test.go b/src/compress/flate/deflate_test.go new file mode 100644 index 0000000..6d20430 --- /dev/null +++ b/src/compress/flate/deflate_test.go @@ -0,0 +1,1070 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "errors" + "fmt" + "internal/testenv" + "io" + "math/rand" + "os" + "reflect" + "runtime/debug" + "sync" + "testing" +) + +type deflateTest struct { + in []byte + level int + out []byte +} + +type deflateInflateTest struct { + in []byte +} + +type reverseBitsTest struct { + in uint16 + bitCount uint8 + out uint16 +} + +var deflateTests = []*deflateTest{ + {[]byte{}, 0, []byte{1, 0, 0, 255, 255}}, + {[]byte{0x11}, -1, []byte{18, 4, 4, 0, 0, 255, 255}}, + {[]byte{0x11}, DefaultCompression, []byte{18, 4, 4, 0, 0, 255, 255}}, + {[]byte{0x11}, 4, []byte{18, 4, 4, 0, 0, 255, 255}}, + + {[]byte{0x11}, 0, []byte{0, 1, 0, 254, 255, 17, 1, 0, 0, 255, 255}}, + {[]byte{0x11, 0x12}, 0, []byte{0, 2, 0, 253, 255, 17, 18, 1, 0, 0, 255, 255}}, + {[]byte{0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11}, 0, + []byte{0, 8, 0, 247, 255, 17, 17, 17, 17, 17, 17, 17, 17, 1, 0, 0, 255, 255}, + }, + {[]byte{}, 2, []byte{1, 0, 0, 255, 255}}, + {[]byte{0x11}, 2, []byte{18, 4, 4, 0, 0, 255, 255}}, + {[]byte{0x11, 0x12}, 2, []byte{18, 20, 2, 4, 0, 0, 255, 255}}, + {[]byte{0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11}, 2, []byte{18, 132, 2, 64, 0, 0, 0, 255, 255}}, + {[]byte{}, 9, []byte{1, 0, 0, 255, 255}}, + {[]byte{0x11}, 9, []byte{18, 4, 4, 0, 0, 255, 255}}, + {[]byte{0x11, 0x12}, 9, []byte{18, 20, 2, 4, 0, 0, 255, 255}}, + {[]byte{0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11}, 9, []byte{18, 132, 2, 64, 0, 0, 0, 255, 255}}, +} + +var deflateInflateTests = []*deflateInflateTest{ + {[]byte{}}, + {[]byte{0x11}}, + {[]byte{0x11, 0x12}}, + {[]byte{0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11}}, + {[]byte{0x11, 0x10, 0x13, 0x41, 0x21, 0x21, 0x41, 0x13, 0x87, 0x78, 0x13}}, + {largeDataChunk()}, +} + +var reverseBitsTests = []*reverseBitsTest{ + {1, 1, 1}, + {1, 2, 2}, + {1, 3, 4}, + {1, 4, 8}, + {1, 5, 16}, + {17, 5, 17}, + {257, 9, 257}, + {29, 5, 23}, +} + +func largeDataChunk() []byte { + result := make([]byte, 100000) + for i := range result { + result[i] = byte(i * i & 0xFF) + } + return result +} + +func TestBulkHash4(t *testing.T) { + for _, x := range deflateTests { + y := x.out + if len(y) < minMatchLength { + continue + } + y = append(y, y...) + for j := 4; j < len(y); j++ { + y := y[:j] + dst := make([]uint32, len(y)-minMatchLength+1) + for i := range dst { + dst[i] = uint32(i + 100) + } + bulkHash4(y, dst) + for i, got := range dst { + want := hash4(y[i:]) + if got != want && got == uint32(i)+100 { + t.Errorf("Len:%d Index:%d, want 0x%08x but not modified", len(y), i, want) + } else if got != want { + t.Errorf("Len:%d Index:%d, got 0x%08x want:0x%08x", len(y), i, got, want) + } + } + } + } +} + +func TestDeflate(t *testing.T) { + for _, h := range deflateTests { + var buf bytes.Buffer + w, err := NewWriter(&buf, h.level) + if err != nil { + t.Errorf("NewWriter: %v", err) + continue + } + w.Write(h.in) + w.Close() + if !bytes.Equal(buf.Bytes(), h.out) { + t.Errorf("Deflate(%d, %x) = \n%#v, want \n%#v", h.level, h.in, buf.Bytes(), h.out) + } + } +} + +func TestWriterClose(t *testing.T) { + b := new(bytes.Buffer) + zw, err := NewWriter(b, 6) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + + if c, err := zw.Write([]byte("Test")); err != nil || c != 4 { + t.Fatalf("Write to not closed writer: %s, %d", err, c) + } + + if err := zw.Close(); err != nil { + t.Fatalf("Close: %v", err) + } + + afterClose := b.Len() + + if c, err := zw.Write([]byte("Test")); err == nil || c != 0 { + t.Fatalf("Write to closed writer: %v, %d", err, c) + } + + if err := zw.Flush(); err == nil { + t.Fatalf("Flush to closed writer: %s", err) + } + + if err := zw.Close(); err != nil { + t.Fatalf("Close: %v", err) + } + + if afterClose != b.Len() { + t.Fatalf("Writer wrote data after close. After close: %d. After writes on closed stream: %d", afterClose, b.Len()) + } +} + +// A sparseReader returns a stream consisting of 0s followed by 1<<16 1s. +// This tests missing hash references in a very large input. +type sparseReader struct { + l int64 + cur int64 +} + +func (r *sparseReader) Read(b []byte) (n int, err error) { + if r.cur >= r.l { + return 0, io.EOF + } + n = len(b) + cur := r.cur + int64(n) + if cur > r.l { + n -= int(cur - r.l) + cur = r.l + } + for i := range b[0:n] { + if r.cur+int64(i) >= r.l-1<<16 { + b[i] = 1 + } else { + b[i] = 0 + } + } + r.cur = cur + return +} + +func TestVeryLongSparseChunk(t *testing.T) { + if testing.Short() { + t.Skip("skipping sparse chunk during short test") + } + w, err := NewWriter(io.Discard, 1) + if err != nil { + t.Errorf("NewWriter: %v", err) + return + } + if _, err = io.Copy(w, &sparseReader{l: 23e8}); err != nil { + t.Errorf("Compress failed: %v", err) + return + } +} + +type syncBuffer struct { + buf bytes.Buffer + mu sync.RWMutex + closed bool + ready chan bool +} + +func newSyncBuffer() *syncBuffer { + return &syncBuffer{ready: make(chan bool, 1)} +} + +func (b *syncBuffer) Read(p []byte) (n int, err error) { + for { + b.mu.RLock() + n, err = b.buf.Read(p) + b.mu.RUnlock() + if n > 0 || b.closed { + return + } + <-b.ready + } +} + +func (b *syncBuffer) signal() { + select { + case b.ready <- true: + default: + } +} + +func (b *syncBuffer) Write(p []byte) (n int, err error) { + n, err = b.buf.Write(p) + b.signal() + return +} + +func (b *syncBuffer) WriteMode() { + b.mu.Lock() +} + +func (b *syncBuffer) ReadMode() { + b.mu.Unlock() + b.signal() +} + +func (b *syncBuffer) Close() error { + b.closed = true + b.signal() + return nil +} + +func testSync(t *testing.T, level int, input []byte, name string) { + if len(input) == 0 { + return + } + + t.Logf("--testSync %d, %d, %s", level, len(input), name) + buf := newSyncBuffer() + buf1 := new(bytes.Buffer) + buf.WriteMode() + w, err := NewWriter(io.MultiWriter(buf, buf1), level) + if err != nil { + t.Errorf("NewWriter: %v", err) + return + } + r := NewReader(buf) + + // Write half the input and read back. + for i := 0; i < 2; i++ { + var lo, hi int + if i == 0 { + lo, hi = 0, (len(input)+1)/2 + } else { + lo, hi = (len(input)+1)/2, len(input) + } + t.Logf("#%d: write %d-%d", i, lo, hi) + if _, err := w.Write(input[lo:hi]); err != nil { + t.Errorf("testSync: write: %v", err) + return + } + if i == 0 { + if err := w.Flush(); err != nil { + t.Errorf("testSync: flush: %v", err) + return + } + } else { + if err := w.Close(); err != nil { + t.Errorf("testSync: close: %v", err) + } + } + buf.ReadMode() + out := make([]byte, hi-lo+1) + m, err := io.ReadAtLeast(r, out, hi-lo) + t.Logf("#%d: read %d", i, m) + if m != hi-lo || err != nil { + t.Errorf("testSync/%d (%d, %d, %s): read %d: %d, %v (%d left)", i, level, len(input), name, hi-lo, m, err, buf.buf.Len()) + return + } + if !bytes.Equal(input[lo:hi], out[:hi-lo]) { + t.Errorf("testSync/%d: read wrong bytes: %x vs %x", i, input[lo:hi], out[:hi-lo]) + return + } + // This test originally checked that after reading + // the first half of the input, there was nothing left + // in the read buffer (buf.buf.Len() != 0) but that is + // not necessarily the case: the write Flush may emit + // some extra framing bits that are not necessary + // to process to obtain the first half of the uncompressed + // data. The test ran correctly most of the time, because + // the background goroutine had usually read even + // those extra bits by now, but it's not a useful thing to + // check. + buf.WriteMode() + } + buf.ReadMode() + out := make([]byte, 10) + if n, err := r.Read(out); n > 0 || err != io.EOF { + t.Errorf("testSync (%d, %d, %s): final Read: %d, %v (hex: %x)", level, len(input), name, n, err, out[0:n]) + } + if buf.buf.Len() != 0 { + t.Errorf("testSync (%d, %d, %s): extra data at end", level, len(input), name) + } + r.Close() + + // stream should work for ordinary reader too + r = NewReader(buf1) + out, err = io.ReadAll(r) + if err != nil { + t.Errorf("testSync: read: %s", err) + return + } + r.Close() + if !bytes.Equal(input, out) { + t.Errorf("testSync: decompress(compress(data)) != data: level=%d input=%s", level, name) + } +} + +func testToFromWithLevelAndLimit(t *testing.T, level int, input []byte, name string, limit int) { + var buffer bytes.Buffer + w, err := NewWriter(&buffer, level) + if err != nil { + t.Errorf("NewWriter: %v", err) + return + } + w.Write(input) + w.Close() + if limit > 0 && buffer.Len() > limit { + t.Errorf("level: %d, len(compress(data)) = %d > limit = %d", level, buffer.Len(), limit) + return + } + if limit > 0 { + t.Logf("level: %d, size:%.2f%%, %d b\n", level, float64(buffer.Len()*100)/float64(limit), buffer.Len()) + } + r := NewReader(&buffer) + out, err := io.ReadAll(r) + if err != nil { + t.Errorf("read: %s", err) + return + } + r.Close() + if !bytes.Equal(input, out) { + t.Errorf("decompress(compress(data)) != data: level=%d input=%s", level, name) + return + } + testSync(t, level, input, name) +} + +func testToFromWithLimit(t *testing.T, input []byte, name string, limit [11]int) { + for i := 0; i < 10; i++ { + testToFromWithLevelAndLimit(t, i, input, name, limit[i]) + } + // Test HuffmanCompression + testToFromWithLevelAndLimit(t, -2, input, name, limit[10]) +} + +func TestDeflateInflate(t *testing.T) { + t.Parallel() + for i, h := range deflateInflateTests { + if testing.Short() && len(h.in) > 10000 { + continue + } + testToFromWithLimit(t, h.in, fmt.Sprintf("#%d", i), [11]int{}) + } +} + +func TestReverseBits(t *testing.T) { + for _, h := range reverseBitsTests { + if v := reverseBits(h.in, h.bitCount); v != h.out { + t.Errorf("reverseBits(%v,%v) = %v, want %v", + h.in, h.bitCount, v, h.out) + } + } +} + +type deflateInflateStringTest struct { + filename string + label string + limit [11]int +} + +var deflateInflateStringTests = []deflateInflateStringTest{ + { + "../testdata/e.txt", + "2.718281828...", + [...]int{100018, 50650, 50960, 51150, 50930, 50790, 50790, 50790, 50790, 50790, 43683}, + }, + { + "../../testdata/Isaac.Newton-Opticks.txt", + "Isaac.Newton-Opticks", + [...]int{567248, 218338, 198211, 193152, 181100, 175427, 175427, 173597, 173422, 173422, 325240}, + }, +} + +func TestDeflateInflateString(t *testing.T) { + t.Parallel() + if testing.Short() && testenv.Builder() == "" { + t.Skip("skipping in short mode") + } + for _, test := range deflateInflateStringTests { + gold, err := os.ReadFile(test.filename) + if err != nil { + t.Error(err) + } + testToFromWithLimit(t, gold, test.label, test.limit) + if testing.Short() { + break + } + } +} + +func TestReaderDict(t *testing.T) { + const ( + dict = "hello world" + text = "hello again world" + ) + var b bytes.Buffer + w, err := NewWriter(&b, 5) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + w.Write([]byte(dict)) + w.Flush() + b.Reset() + w.Write([]byte(text)) + w.Close() + + r := NewReaderDict(&b, []byte(dict)) + data, err := io.ReadAll(r) + if err != nil { + t.Fatal(err) + } + if string(data) != "hello again world" { + t.Fatalf("read returned %q want %q", string(data), text) + } +} + +func TestWriterDict(t *testing.T) { + const ( + dict = "hello world" + text = "hello again world" + ) + var b bytes.Buffer + w, err := NewWriter(&b, 5) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + w.Write([]byte(dict)) + w.Flush() + b.Reset() + w.Write([]byte(text)) + w.Close() + + var b1 bytes.Buffer + w, _ = NewWriterDict(&b1, 5, []byte(dict)) + w.Write([]byte(text)) + w.Close() + + if !bytes.Equal(b1.Bytes(), b.Bytes()) { + t.Fatalf("writer wrote %q want %q", b1.Bytes(), b.Bytes()) + } +} + +// See https://golang.org/issue/2508 +func TestRegression2508(t *testing.T) { + if testing.Short() { + t.Logf("test disabled with -short") + return + } + w, err := NewWriter(io.Discard, 1) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + buf := make([]byte, 1024) + for i := 0; i < 131072; i++ { + if _, err := w.Write(buf); err != nil { + t.Fatalf("writer failed: %v", err) + } + } + w.Close() +} + +func TestWriterReset(t *testing.T) { + t.Parallel() + for level := 0; level <= 9; level++ { + if testing.Short() && level > 1 { + break + } + w, err := NewWriter(io.Discard, level) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + buf := []byte("hello world") + n := 1024 + if testing.Short() { + n = 10 + } + for i := 0; i < n; i++ { + w.Write(buf) + } + w.Reset(io.Discard) + + wref, err := NewWriter(io.Discard, level) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + + // DeepEqual doesn't compare functions. + w.d.fill, wref.d.fill = nil, nil + w.d.step, wref.d.step = nil, nil + w.d.bulkHasher, wref.d.bulkHasher = nil, nil + w.d.bestSpeed, wref.d.bestSpeed = nil, nil + // hashMatch is always overwritten when used. + copy(w.d.hashMatch[:], wref.d.hashMatch[:]) + if len(w.d.tokens) != 0 { + t.Errorf("level %d Writer not reset after Reset. %d tokens were present", level, len(w.d.tokens)) + } + // As long as the length is 0, we don't care about the content. + w.d.tokens = wref.d.tokens + + // We don't care if there are values in the window, as long as it is at d.index is 0 + w.d.window = wref.d.window + if !reflect.DeepEqual(w, wref) { + t.Errorf("level %d Writer not reset after Reset", level) + } + } + + levels := []int{0, 1, 2, 5, 9} + for _, level := range levels { + t.Run(fmt.Sprint(level), func(t *testing.T) { + testResetOutput(t, level, nil) + }) + } + + t.Run("dict", func(t *testing.T) { + for _, level := range levels { + t.Run(fmt.Sprint(level), func(t *testing.T) { + testResetOutput(t, level, nil) + }) + } + }) +} + +func testResetOutput(t *testing.T, level int, dict []byte) { + writeData := func(w *Writer) { + msg := []byte("now is the time for all good gophers") + w.Write(msg) + w.Flush() + + hello := []byte("hello world") + for i := 0; i < 1024; i++ { + w.Write(hello) + } + + fill := bytes.Repeat([]byte("x"), 65000) + w.Write(fill) + } + + buf := new(bytes.Buffer) + var w *Writer + var err error + if dict == nil { + w, err = NewWriter(buf, level) + } else { + w, err = NewWriterDict(buf, level, dict) + } + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + + writeData(w) + w.Close() + out1 := buf.Bytes() + + buf2 := new(bytes.Buffer) + w.Reset(buf2) + writeData(w) + w.Close() + out2 := buf2.Bytes() + + if len(out1) != len(out2) { + t.Errorf("got %d, expected %d bytes", len(out2), len(out1)) + return + } + if !bytes.Equal(out1, out2) { + mm := 0 + for i, b := range out1[:len(out2)] { + if b != out2[i] { + t.Errorf("mismatch index %d: %#02x, expected %#02x", i, out2[i], b) + } + mm++ + if mm == 10 { + t.Fatal("Stopping") + } + } + } + t.Logf("got %d bytes", len(out1)) +} + +// TestBestSpeed tests that round-tripping through deflate and then inflate +// recovers the original input. The Write sizes are near the thresholds in the +// compressor.encSpeed method (0, 16, 128), as well as near maxStoreBlockSize +// (65535). +func TestBestSpeed(t *testing.T) { + t.Parallel() + abc := make([]byte, 128) + for i := range abc { + abc[i] = byte(i) + } + abcabc := bytes.Repeat(abc, 131072/len(abc)) + var want []byte + + testCases := [][]int{ + {65536, 0}, + {65536, 1}, + {65536, 1, 256}, + {65536, 1, 65536}, + {65536, 14}, + {65536, 15}, + {65536, 16}, + {65536, 16, 256}, + {65536, 16, 65536}, + {65536, 127}, + {65536, 128}, + {65536, 128, 256}, + {65536, 128, 65536}, + {65536, 129}, + {65536, 65536, 256}, + {65536, 65536, 65536}, + } + + for i, tc := range testCases { + if i >= 3 && testing.Short() { + break + } + for _, firstN := range []int{1, 65534, 65535, 65536, 65537, 131072} { + tc[0] = firstN + outer: + for _, flush := range []bool{false, true} { + buf := new(bytes.Buffer) + want = want[:0] + + w, err := NewWriter(buf, BestSpeed) + if err != nil { + t.Errorf("i=%d, firstN=%d, flush=%t: NewWriter: %v", i, firstN, flush, err) + continue + } + for _, n := range tc { + want = append(want, abcabc[:n]...) + if _, err := w.Write(abcabc[:n]); err != nil { + t.Errorf("i=%d, firstN=%d, flush=%t: Write: %v", i, firstN, flush, err) + continue outer + } + if !flush { + continue + } + if err := w.Flush(); err != nil { + t.Errorf("i=%d, firstN=%d, flush=%t: Flush: %v", i, firstN, flush, err) + continue outer + } + } + if err := w.Close(); err != nil { + t.Errorf("i=%d, firstN=%d, flush=%t: Close: %v", i, firstN, flush, err) + continue + } + + r := NewReader(buf) + got, err := io.ReadAll(r) + if err != nil { + t.Errorf("i=%d, firstN=%d, flush=%t: ReadAll: %v", i, firstN, flush, err) + continue + } + r.Close() + + if !bytes.Equal(got, want) { + t.Errorf("i=%d, firstN=%d, flush=%t: corruption during deflate-then-inflate", i, firstN, flush) + continue + } + } + } + } +} + +var errIO = errors.New("IO error") + +// failWriter fails with errIO exactly at the nth call to Write. +type failWriter struct{ n int } + +func (w *failWriter) Write(b []byte) (int, error) { + w.n-- + if w.n == -1 { + return 0, errIO + } + return len(b), nil +} + +func TestWriterPersistentWriteError(t *testing.T) { + t.Parallel() + d, err := os.ReadFile("../../testdata/Isaac.Newton-Opticks.txt") + if err != nil { + t.Fatalf("ReadFile: %v", err) + } + d = d[:10000] // Keep this test short + + zw, err := NewWriter(nil, DefaultCompression) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + + // Sweep over the threshold at which an error is returned. + // The variable i makes it such that the ith call to failWriter.Write will + // return errIO. Since failWriter errors are not persistent, we must ensure + // that flate.Writer errors are persistent. + for i := 0; i < 1000; i++ { + fw := &failWriter{i} + zw.Reset(fw) + + _, werr := zw.Write(d) + cerr := zw.Close() + ferr := zw.Flush() + if werr != errIO && werr != nil { + t.Errorf("test %d, mismatching Write error: got %v, want %v", i, werr, errIO) + } + if cerr != errIO && fw.n < 0 { + t.Errorf("test %d, mismatching Close error: got %v, want %v", i, cerr, errIO) + } + if ferr != errIO && fw.n < 0 { + t.Errorf("test %d, mismatching Flush error: got %v, want %v", i, ferr, errIO) + } + if fw.n >= 0 { + // At this point, the failure threshold was sufficiently high enough + // that we wrote the whole stream without any errors. + return + } + } +} +func TestWriterPersistentFlushError(t *testing.T) { + zw, err := NewWriter(&failWriter{0}, DefaultCompression) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + flushErr := zw.Flush() + closeErr := zw.Close() + _, writeErr := zw.Write([]byte("Test")) + checkErrors([]error{closeErr, flushErr, writeErr}, errIO, t) +} + +func TestWriterPersistentCloseError(t *testing.T) { + // If underlying writer return error on closing stream we should persistent this error across all writer calls. + zw, err := NewWriter(&failWriter{0}, DefaultCompression) + if err != nil { + t.Fatalf("NewWriter: %v", err) + } + closeErr := zw.Close() + flushErr := zw.Flush() + _, writeErr := zw.Write([]byte("Test")) + checkErrors([]error{closeErr, flushErr, writeErr}, errIO, t) + + // After closing writer we should persistent "write after close" error across Flush and Write calls, but return nil + // on next Close calls. + var b bytes.Buffer + zw.Reset(&b) + err = zw.Close() + if err != nil { + t.Fatalf("First call to close returned error: %s", err) + } + err = zw.Close() + if err != nil { + t.Fatalf("Second call to close returned error: %s", err) + } + + flushErr = zw.Flush() + _, writeErr = zw.Write([]byte("Test")) + checkErrors([]error{flushErr, writeErr}, errWriterClosed, t) +} + +func checkErrors(got []error, want error, t *testing.T) { + t.Helper() + for _, err := range got { + if err != want { + t.Errorf("Errors dosn't match\nWant: %s\nGot: %s", want, got) + } + } +} + +func TestBestSpeedMatch(t *testing.T) { + t.Parallel() + cases := []struct { + previous, current []byte + t, s, want int32 + }{{ + previous: []byte{0, 0, 0, 1, 2}, + current: []byte{3, 4, 5, 0, 1, 2, 3, 4, 5}, + t: -3, + s: 3, + want: 6, + }, { + previous: []byte{0, 0, 0, 1, 2}, + current: []byte{2, 4, 5, 0, 1, 2, 3, 4, 5}, + t: -3, + s: 3, + want: 3, + }, { + previous: []byte{0, 0, 0, 1, 1}, + current: []byte{3, 4, 5, 0, 1, 2, 3, 4, 5}, + t: -3, + s: 3, + want: 2, + }, { + previous: []byte{0, 0, 0, 1, 2}, + current: []byte{2, 2, 2, 2, 1, 2, 3, 4, 5}, + t: -1, + s: 0, + want: 4, + }, { + previous: []byte{0, 0, 0, 1, 2, 3, 4, 5, 2, 2}, + current: []byte{2, 2, 2, 2, 1, 2, 3, 4, 5}, + t: -7, + s: 4, + want: 5, + }, { + previous: []byte{9, 9, 9, 9, 9}, + current: []byte{2, 2, 2, 2, 1, 2, 3, 4, 5}, + t: -1, + s: 0, + want: 0, + }, { + previous: []byte{9, 9, 9, 9, 9}, + current: []byte{9, 2, 2, 2, 1, 2, 3, 4, 5}, + t: 0, + s: 1, + want: 0, + }, { + previous: []byte{}, + current: []byte{9, 2, 2, 2, 1, 2, 3, 4, 5}, + t: -5, + s: 1, + want: 0, + }, { + previous: []byte{}, + current: []byte{9, 2, 2, 2, 1, 2, 3, 4, 5}, + t: -1, + s: 1, + want: 0, + }, { + previous: []byte{}, + current: []byte{2, 2, 2, 2, 1, 2, 3, 4, 5}, + t: 0, + s: 1, + want: 3, + }, { + previous: []byte{3, 4, 5}, + current: []byte{3, 4, 5}, + t: -3, + s: 0, + want: 3, + }, { + previous: make([]byte, 1000), + current: make([]byte, 1000), + t: -1000, + s: 0, + want: maxMatchLength - 4, + }, { + previous: make([]byte, 200), + current: make([]byte, 500), + t: -200, + s: 0, + want: maxMatchLength - 4, + }, { + previous: make([]byte, 200), + current: make([]byte, 500), + t: 0, + s: 1, + want: maxMatchLength - 4, + }, { + previous: make([]byte, maxMatchLength-4), + current: make([]byte, 500), + t: -(maxMatchLength - 4), + s: 0, + want: maxMatchLength - 4, + }, { + previous: make([]byte, 200), + current: make([]byte, 500), + t: -200, + s: 400, + want: 100, + }, { + previous: make([]byte, 10), + current: make([]byte, 500), + t: 200, + s: 400, + want: 100, + }} + for i, c := range cases { + e := deflateFast{prev: c.previous} + got := e.matchLen(c.s, c.t, c.current) + if got != c.want { + t.Errorf("Test %d: match length, want %d, got %d", i, c.want, got) + } + } +} + +func TestBestSpeedMaxMatchOffset(t *testing.T) { + t.Parallel() + const abc, xyz = "abcdefgh", "stuvwxyz" + for _, matchBefore := range []bool{false, true} { + for _, extra := range []int{0, inputMargin - 1, inputMargin, inputMargin + 1, 2 * inputMargin} { + for offsetAdj := -5; offsetAdj <= +5; offsetAdj++ { + report := func(desc string, err error) { + t.Errorf("matchBefore=%t, extra=%d, offsetAdj=%d: %s%v", + matchBefore, extra, offsetAdj, desc, err) + } + + offset := maxMatchOffset + offsetAdj + + // Make src to be a []byte of the form + // "%s%s%s%s%s" % (abc, zeros0, xyzMaybe, abc, zeros1) + // where: + // zeros0 is approximately maxMatchOffset zeros. + // xyzMaybe is either xyz or the empty string. + // zeros1 is between 0 and 30 zeros. + // The difference between the two abc's will be offset, which + // is maxMatchOffset plus or minus a small adjustment. + src := make([]byte, offset+len(abc)+extra) + copy(src, abc) + if !matchBefore { + copy(src[offset-len(xyz):], xyz) + } + copy(src[offset:], abc) + + buf := new(bytes.Buffer) + w, err := NewWriter(buf, BestSpeed) + if err != nil { + report("NewWriter: ", err) + continue + } + if _, err := w.Write(src); err != nil { + report("Write: ", err) + continue + } + if err := w.Close(); err != nil { + report("Writer.Close: ", err) + continue + } + + r := NewReader(buf) + dst, err := io.ReadAll(r) + r.Close() + if err != nil { + report("ReadAll: ", err) + continue + } + + if !bytes.Equal(dst, src) { + report("", fmt.Errorf("bytes differ after round-tripping")) + continue + } + } + } + } +} + +func TestBestSpeedShiftOffsets(t *testing.T) { + // Test if shiftoffsets properly preserves matches and resets out-of-range matches + // seen in https://github.com/golang/go/issues/4142 + enc := newDeflateFast() + + // testData may not generate internal matches. + testData := make([]byte, 32) + rng := rand.New(rand.NewSource(0)) + for i := range testData { + testData[i] = byte(rng.Uint32()) + } + + // Encode the testdata with clean state. + // Second part should pick up matches from the first block. + wantFirstTokens := len(enc.encode(nil, testData)) + wantSecondTokens := len(enc.encode(nil, testData)) + + if wantFirstTokens <= wantSecondTokens { + t.Fatalf("test needs matches between inputs to be generated") + } + // Forward the current indicator to before wraparound. + enc.cur = bufferReset - int32(len(testData)) + + // Part 1 before wrap, should match clean state. + got := len(enc.encode(nil, testData)) + if wantFirstTokens != got { + t.Errorf("got %d, want %d tokens", got, wantFirstTokens) + } + + // Verify we are about to wrap. + if enc.cur != bufferReset { + t.Errorf("got %d, want e.cur to be at bufferReset (%d)", enc.cur, bufferReset) + } + + // Part 2 should match clean state as well even if wrapped. + got = len(enc.encode(nil, testData)) + if wantSecondTokens != got { + t.Errorf("got %d, want %d token", got, wantSecondTokens) + } + + // Verify that we wrapped. + if enc.cur >= bufferReset { + t.Errorf("want e.cur to be < bufferReset (%d), got %d", bufferReset, enc.cur) + } + + // Forward the current buffer, leaving the matches at the bottom. + enc.cur = bufferReset + enc.shiftOffsets() + + // Ensure that no matches were picked up. + got = len(enc.encode(nil, testData)) + if wantFirstTokens != got { + t.Errorf("got %d, want %d tokens", got, wantFirstTokens) + } +} + +func TestMaxStackSize(t *testing.T) { + // This test must not run in parallel with other tests as debug.SetMaxStack + // affects all goroutines. + n := debug.SetMaxStack(1 << 16) + defer debug.SetMaxStack(n) + + var wg sync.WaitGroup + defer wg.Wait() + + b := make([]byte, 1<<20) + for level := HuffmanOnly; level <= BestCompression; level++ { + // Run in separate goroutine to increase probability of stack regrowth. + wg.Add(1) + go func(level int) { + defer wg.Done() + zw, err := NewWriter(io.Discard, level) + if err != nil { + t.Errorf("level %d, NewWriter() = %v, want nil", level, err) + } + if n, err := zw.Write(b); n != len(b) || err != nil { + t.Errorf("level %d, Write() = (%d, %v), want (%d, nil)", level, n, err, len(b)) + } + if err := zw.Close(); err != nil { + t.Errorf("level %d, Close() = %v, want nil", level, err) + } + zw.Reset(io.Discard) + }(level) + } +} diff --git a/src/compress/flate/deflatefast.go b/src/compress/flate/deflatefast.go new file mode 100644 index 0000000..6aa439f --- /dev/null +++ b/src/compress/flate/deflatefast.go @@ -0,0 +1,309 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import "math" + +// This encoding algorithm, which prioritizes speed over output size, is +// based on Snappy's LZ77-style encoder: github.com/golang/snappy + +const ( + tableBits = 14 // Bits used in the table. + tableSize = 1 << tableBits // Size of the table. + tableMask = tableSize - 1 // Mask for table indices. Redundant, but can eliminate bounds checks. + tableShift = 32 - tableBits // Right-shift to get the tableBits most significant bits of a uint32. + + // Reset the buffer offset when reaching this. + // Offsets are stored between blocks as int32 values. + // Since the offset we are checking against is at the beginning + // of the buffer, we need to subtract the current and input + // buffer to not risk overflowing the int32. + bufferReset = math.MaxInt32 - maxStoreBlockSize*2 +) + +func load32(b []byte, i int32) uint32 { + b = b[i : i+4 : len(b)] // Help the compiler eliminate bounds checks on the next line. + return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24 +} + +func load64(b []byte, i int32) uint64 { + b = b[i : i+8 : len(b)] // Help the compiler eliminate bounds checks on the next line. + return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 | + uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56 +} + +func hash(u uint32) uint32 { + return (u * 0x1e35a7bd) >> tableShift +} + +// These constants are defined by the Snappy implementation so that its +// assembly implementation can fast-path some 16-bytes-at-a-time copies. They +// aren't necessary in the pure Go implementation, as we don't use those same +// optimizations, but using the same thresholds doesn't really hurt. +const ( + inputMargin = 16 - 1 + minNonLiteralBlockSize = 1 + 1 + inputMargin +) + +type tableEntry struct { + val uint32 // Value at destination + offset int32 +} + +// deflateFast maintains the table for matches, +// and the previous byte block for cross block matching. +type deflateFast struct { + table [tableSize]tableEntry + prev []byte // Previous block, zero length if unknown. + cur int32 // Current match offset. +} + +func newDeflateFast() *deflateFast { + return &deflateFast{cur: maxStoreBlockSize, prev: make([]byte, 0, maxStoreBlockSize)} +} + +// encode encodes a block given in src and appends tokens +// to dst and returns the result. +func (e *deflateFast) encode(dst []token, src []byte) []token { + // Ensure that e.cur doesn't wrap. + if e.cur >= bufferReset { + e.shiftOffsets() + } + + // This check isn't in the Snappy implementation, but there, the caller + // instead of the callee handles this case. + if len(src) < minNonLiteralBlockSize { + e.cur += maxStoreBlockSize + e.prev = e.prev[:0] + return emitLiteral(dst, src) + } + + // sLimit is when to stop looking for offset/length copies. The inputMargin + // lets us use a fast path for emitLiteral in the main loop, while we are + // looking for copies. + sLimit := int32(len(src) - inputMargin) + + // nextEmit is where in src the next emitLiteral should start from. + nextEmit := int32(0) + s := int32(0) + cv := load32(src, s) + nextHash := hash(cv) + + for { + // Copied from the C++ snappy implementation: + // + // Heuristic match skipping: If 32 bytes are scanned with no matches + // found, start looking only at every other byte. If 32 more bytes are + // scanned (or skipped), look at every third byte, etc.. When a match + // is found, immediately go back to looking at every byte. This is a + // small loss (~5% performance, ~0.1% density) for compressible data + // due to more bookkeeping, but for non-compressible data (such as + // JPEG) it's a huge win since the compressor quickly "realizes" the + // data is incompressible and doesn't bother looking for matches + // everywhere. + // + // The "skip" variable keeps track of how many bytes there are since + // the last match; dividing it by 32 (ie. right-shifting by five) gives + // the number of bytes to move ahead for each iteration. + skip := int32(32) + + nextS := s + var candidate tableEntry + for { + s = nextS + bytesBetweenHashLookups := skip >> 5 + nextS = s + bytesBetweenHashLookups + skip += bytesBetweenHashLookups + if nextS > sLimit { + goto emitRemainder + } + candidate = e.table[nextHash&tableMask] + now := load32(src, nextS) + e.table[nextHash&tableMask] = tableEntry{offset: s + e.cur, val: cv} + nextHash = hash(now) + + offset := s - (candidate.offset - e.cur) + if offset > maxMatchOffset || cv != candidate.val { + // Out of range or not matched. + cv = now + continue + } + break + } + + // A 4-byte match has been found. We'll later see if more than 4 bytes + // match. But, prior to the match, src[nextEmit:s] are unmatched. Emit + // them as literal bytes. + dst = emitLiteral(dst, src[nextEmit:s]) + + // Call emitCopy, and then see if another emitCopy could be our next + // move. Repeat until we find no match for the input immediately after + // what was consumed by the last emitCopy call. + // + // If we exit this loop normally then we need to call emitLiteral next, + // though we don't yet know how big the literal will be. We handle that + // by proceeding to the next iteration of the main loop. We also can + // exit this loop via goto if we get close to exhausting the input. + for { + // Invariant: we have a 4-byte match at s, and no need to emit any + // literal bytes prior to s. + + // Extend the 4-byte match as long as possible. + // + s += 4 + t := candidate.offset - e.cur + 4 + l := e.matchLen(s, t, src) + + // matchToken is flate's equivalent of Snappy's emitCopy. (length,offset) + dst = append(dst, matchToken(uint32(l+4-baseMatchLength), uint32(s-t-baseMatchOffset))) + s += l + nextEmit = s + if s >= sLimit { + goto emitRemainder + } + + // We could immediately start working at s now, but to improve + // compression we first update the hash table at s-1 and at s. If + // another emitCopy is not our next move, also calculate nextHash + // at s+1. At least on GOARCH=amd64, these three hash calculations + // are faster as one load64 call (with some shifts) instead of + // three load32 calls. + x := load64(src, s-1) + prevHash := hash(uint32(x)) + e.table[prevHash&tableMask] = tableEntry{offset: e.cur + s - 1, val: uint32(x)} + x >>= 8 + currHash := hash(uint32(x)) + candidate = e.table[currHash&tableMask] + e.table[currHash&tableMask] = tableEntry{offset: e.cur + s, val: uint32(x)} + + offset := s - (candidate.offset - e.cur) + if offset > maxMatchOffset || uint32(x) != candidate.val { + cv = uint32(x >> 8) + nextHash = hash(cv) + s++ + break + } + } + } + +emitRemainder: + if int(nextEmit) < len(src) { + dst = emitLiteral(dst, src[nextEmit:]) + } + e.cur += int32(len(src)) + e.prev = e.prev[:len(src)] + copy(e.prev, src) + return dst +} + +func emitLiteral(dst []token, lit []byte) []token { + for _, v := range lit { + dst = append(dst, literalToken(uint32(v))) + } + return dst +} + +// matchLen returns the match length between src[s:] and src[t:]. +// t can be negative to indicate the match is starting in e.prev. +// We assume that src[s-4:s] and src[t-4:t] already match. +func (e *deflateFast) matchLen(s, t int32, src []byte) int32 { + s1 := int(s) + maxMatchLength - 4 + if s1 > len(src) { + s1 = len(src) + } + + // If we are inside the current block + if t >= 0 { + b := src[t:] + a := src[s:s1] + b = b[:len(a)] + // Extend the match to be as long as possible. + for i := range a { + if a[i] != b[i] { + return int32(i) + } + } + return int32(len(a)) + } + + // We found a match in the previous block. + tp := int32(len(e.prev)) + t + if tp < 0 { + return 0 + } + + // Extend the match to be as long as possible. + a := src[s:s1] + b := e.prev[tp:] + if len(b) > len(a) { + b = b[:len(a)] + } + a = a[:len(b)] + for i := range b { + if a[i] != b[i] { + return int32(i) + } + } + + // If we reached our limit, we matched everything we are + // allowed to in the previous block and we return. + n := int32(len(b)) + if int(s+n) == s1 { + return n + } + + // Continue looking for more matches in the current block. + a = src[s+n : s1] + b = src[:len(a)] + for i := range a { + if a[i] != b[i] { + return int32(i) + n + } + } + return int32(len(a)) + n +} + +// Reset resets the encoding history. +// This ensures that no matches are made to the previous block. +func (e *deflateFast) reset() { + e.prev = e.prev[:0] + // Bump the offset, so all matches will fail distance check. + // Nothing should be >= e.cur in the table. + e.cur += maxMatchOffset + + // Protect against e.cur wraparound. + if e.cur >= bufferReset { + e.shiftOffsets() + } +} + +// shiftOffsets will shift down all match offset. +// This is only called in rare situations to prevent integer overflow. +// +// See https://golang.org/issue/18636 and https://github.com/golang/go/issues/34121. +func (e *deflateFast) shiftOffsets() { + if len(e.prev) == 0 { + // We have no history; just clear the table. + for i := range e.table[:] { + e.table[i] = tableEntry{} + } + e.cur = maxMatchOffset + 1 + return + } + + // Shift down everything in the table that isn't already too far away. + for i := range e.table[:] { + v := e.table[i].offset - e.cur + maxMatchOffset + 1 + if v < 0 { + // We want to reset e.cur to maxMatchOffset + 1, so we need to shift + // all table entries down by (e.cur - (maxMatchOffset + 1)). + // Because we ignore matches > maxMatchOffset, we can cap + // any negative offsets at 0. + v = 0 + } + e.table[i].offset = v + } + e.cur = maxMatchOffset + 1 +} diff --git a/src/compress/flate/dict_decoder.go b/src/compress/flate/dict_decoder.go new file mode 100644 index 0000000..d2c1904 --- /dev/null +++ b/src/compress/flate/dict_decoder.go @@ -0,0 +1,182 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +// dictDecoder implements the LZ77 sliding dictionary as used in decompression. +// LZ77 decompresses data through sequences of two forms of commands: +// +// - Literal insertions: Runs of one or more symbols are inserted into the data +// stream as is. This is accomplished through the writeByte method for a +// single symbol, or combinations of writeSlice/writeMark for multiple symbols. +// Any valid stream must start with a literal insertion if no preset dictionary +// is used. +// +// - Backward copies: Runs of one or more symbols are copied from previously +// emitted data. Backward copies come as the tuple (dist, length) where dist +// determines how far back in the stream to copy from and length determines how +// many bytes to copy. Note that it is valid for the length to be greater than +// the distance. Since LZ77 uses forward copies, that situation is used to +// perform a form of run-length encoding on repeated runs of symbols. +// The writeCopy and tryWriteCopy are used to implement this command. +// +// For performance reasons, this implementation performs little to no sanity +// checks about the arguments. As such, the invariants documented for each +// method call must be respected. +type dictDecoder struct { + hist []byte // Sliding window history + + // Invariant: 0 <= rdPos <= wrPos <= len(hist) + wrPos int // Current output position in buffer + rdPos int // Have emitted hist[:rdPos] already + full bool // Has a full window length been written yet? +} + +// init initializes dictDecoder to have a sliding window dictionary of the given +// size. If a preset dict is provided, it will initialize the dictionary with +// the contents of dict. +func (dd *dictDecoder) init(size int, dict []byte) { + *dd = dictDecoder{hist: dd.hist} + + if cap(dd.hist) < size { + dd.hist = make([]byte, size) + } + dd.hist = dd.hist[:size] + + if len(dict) > len(dd.hist) { + dict = dict[len(dict)-len(dd.hist):] + } + dd.wrPos = copy(dd.hist, dict) + if dd.wrPos == len(dd.hist) { + dd.wrPos = 0 + dd.full = true + } + dd.rdPos = dd.wrPos +} + +// histSize reports the total amount of historical data in the dictionary. +func (dd *dictDecoder) histSize() int { + if dd.full { + return len(dd.hist) + } + return dd.wrPos +} + +// availRead reports the number of bytes that can be flushed by readFlush. +func (dd *dictDecoder) availRead() int { + return dd.wrPos - dd.rdPos +} + +// availWrite reports the available amount of output buffer space. +func (dd *dictDecoder) availWrite() int { + return len(dd.hist) - dd.wrPos +} + +// writeSlice returns a slice of the available buffer to write data to. +// +// This invariant will be kept: len(s) <= availWrite() +func (dd *dictDecoder) writeSlice() []byte { + return dd.hist[dd.wrPos:] +} + +// writeMark advances the writer pointer by cnt. +// +// This invariant must be kept: 0 <= cnt <= availWrite() +func (dd *dictDecoder) writeMark(cnt int) { + dd.wrPos += cnt +} + +// writeByte writes a single byte to the dictionary. +// +// This invariant must be kept: 0 < availWrite() +func (dd *dictDecoder) writeByte(c byte) { + dd.hist[dd.wrPos] = c + dd.wrPos++ +} + +// writeCopy copies a string at a given (dist, length) to the output. +// This returns the number of bytes copied and may be less than the requested +// length if the available space in the output buffer is too small. +// +// This invariant must be kept: 0 < dist <= histSize() +func (dd *dictDecoder) writeCopy(dist, length int) int { + dstBase := dd.wrPos + dstPos := dstBase + srcPos := dstPos - dist + endPos := dstPos + length + if endPos > len(dd.hist) { + endPos = len(dd.hist) + } + + // Copy non-overlapping section after destination position. + // + // This section is non-overlapping in that the copy length for this section + // is always less than or equal to the backwards distance. This can occur + // if a distance refers to data that wraps-around in the buffer. + // Thus, a backwards copy is performed here; that is, the exact bytes in + // the source prior to the copy is placed in the destination. + if srcPos < 0 { + srcPos += len(dd.hist) + dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:]) + srcPos = 0 + } + + // Copy possibly overlapping section before destination position. + // + // This section can overlap if the copy length for this section is larger + // than the backwards distance. This is allowed by LZ77 so that repeated + // strings can be succinctly represented using (dist, length) pairs. + // Thus, a forwards copy is performed here; that is, the bytes copied is + // possibly dependent on the resulting bytes in the destination as the copy + // progresses along. This is functionally equivalent to the following: + // + // for i := 0; i < endPos-dstPos; i++ { + // dd.hist[dstPos+i] = dd.hist[srcPos+i] + // } + // dstPos = endPos + // + for dstPos < endPos { + dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:dstPos]) + } + + dd.wrPos = dstPos + return dstPos - dstBase +} + +// tryWriteCopy tries to copy a string at a given (distance, length) to the +// output. This specialized version is optimized for short distances. +// +// This method is designed to be inlined for performance reasons. +// +// This invariant must be kept: 0 < dist <= histSize() +func (dd *dictDecoder) tryWriteCopy(dist, length int) int { + dstPos := dd.wrPos + endPos := dstPos + length + if dstPos < dist || endPos > len(dd.hist) { + return 0 + } + dstBase := dstPos + srcPos := dstPos - dist + + // Copy possibly overlapping section before destination position. + for dstPos < endPos { + dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:dstPos]) + } + + dd.wrPos = dstPos + return dstPos - dstBase +} + +// readFlush returns a slice of the historical buffer that is ready to be +// emitted to the user. The data returned by readFlush must be fully consumed +// before calling any other dictDecoder methods. +func (dd *dictDecoder) readFlush() []byte { + toRead := dd.hist[dd.rdPos:dd.wrPos] + dd.rdPos = dd.wrPos + if dd.wrPos == len(dd.hist) { + dd.wrPos, dd.rdPos = 0, 0 + dd.full = true + } + return toRead +} diff --git a/src/compress/flate/dict_decoder_test.go b/src/compress/flate/dict_decoder_test.go new file mode 100644 index 0000000..9275cff --- /dev/null +++ b/src/compress/flate/dict_decoder_test.go @@ -0,0 +1,139 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "strings" + "testing" +) + +func TestDictDecoder(t *testing.T) { + const ( + abc = "ABC\n" + fox = "The quick brown fox jumped over the lazy dog!\n" + poem = "The Road Not Taken\nRobert Frost\n" + + "\n" + + "Two roads diverged in a yellow wood,\n" + + "And sorry I could not travel both\n" + + "And be one traveler, long I stood\n" + + "And looked down one as far as I could\n" + + "To where it bent in the undergrowth;\n" + + "\n" + + "Then took the other, as just as fair,\n" + + "And having perhaps the better claim,\n" + + "Because it was grassy and wanted wear;\n" + + "Though as for that the passing there\n" + + "Had worn them really about the same,\n" + + "\n" + + "And both that morning equally lay\n" + + "In leaves no step had trodden black.\n" + + "Oh, I kept the first for another day!\n" + + "Yet knowing how way leads on to way,\n" + + "I doubted if I should ever come back.\n" + + "\n" + + "I shall be telling this with a sigh\n" + + "Somewhere ages and ages hence:\n" + + "Two roads diverged in a wood, and I-\n" + + "I took the one less traveled by,\n" + + "And that has made all the difference.\n" + ) + + var poemRefs = []struct { + dist int // Backward distance (0 if this is an insertion) + length int // Length of copy or insertion + }{ + {0, 38}, {33, 3}, {0, 48}, {79, 3}, {0, 11}, {34, 5}, {0, 6}, {23, 7}, + {0, 8}, {50, 3}, {0, 2}, {69, 3}, {34, 5}, {0, 4}, {97, 3}, {0, 4}, + {43, 5}, {0, 6}, {7, 4}, {88, 7}, {0, 12}, {80, 3}, {0, 2}, {141, 4}, + {0, 1}, {196, 3}, {0, 3}, {157, 3}, {0, 6}, {181, 3}, {0, 2}, {23, 3}, + {77, 3}, {28, 5}, {128, 3}, {110, 4}, {70, 3}, {0, 4}, {85, 6}, {0, 2}, + {182, 6}, {0, 4}, {133, 3}, {0, 7}, {47, 5}, {0, 20}, {112, 5}, {0, 1}, + {58, 3}, {0, 8}, {59, 3}, {0, 4}, {173, 3}, {0, 5}, {114, 3}, {0, 4}, + {92, 5}, {0, 2}, {71, 3}, {0, 2}, {76, 5}, {0, 1}, {46, 3}, {96, 4}, + {130, 4}, {0, 3}, {360, 3}, {0, 3}, {178, 5}, {0, 7}, {75, 3}, {0, 3}, + {45, 6}, {0, 6}, {299, 6}, {180, 3}, {70, 6}, {0, 1}, {48, 3}, {66, 4}, + {0, 3}, {47, 5}, {0, 9}, {325, 3}, {0, 1}, {359, 3}, {318, 3}, {0, 2}, + {199, 3}, {0, 1}, {344, 3}, {0, 3}, {248, 3}, {0, 10}, {310, 3}, {0, 3}, + {93, 6}, {0, 3}, {252, 3}, {157, 4}, {0, 2}, {273, 5}, {0, 14}, {99, 4}, + {0, 1}, {464, 4}, {0, 2}, {92, 4}, {495, 3}, {0, 1}, {322, 4}, {16, 4}, + {0, 3}, {402, 3}, {0, 2}, {237, 4}, {0, 2}, {432, 4}, {0, 1}, {483, 5}, + {0, 2}, {294, 4}, {0, 2}, {306, 3}, {113, 5}, {0, 1}, {26, 4}, {164, 3}, + {488, 4}, {0, 1}, {542, 3}, {248, 6}, {0, 5}, {205, 3}, {0, 8}, {48, 3}, + {449, 6}, {0, 2}, {192, 3}, {328, 4}, {9, 5}, {433, 3}, {0, 3}, {622, 25}, + {615, 5}, {46, 5}, {0, 2}, {104, 3}, {475, 10}, {549, 3}, {0, 4}, {597, 8}, + {314, 3}, {0, 1}, {473, 6}, {317, 5}, {0, 1}, {400, 3}, {0, 3}, {109, 3}, + {151, 3}, {48, 4}, {0, 4}, {125, 3}, {108, 3}, {0, 2}, + } + + var got, want bytes.Buffer + var dd dictDecoder + dd.init(1<<11, nil) + + var writeCopy = func(dist, length int) { + for length > 0 { + cnt := dd.tryWriteCopy(dist, length) + if cnt == 0 { + cnt = dd.writeCopy(dist, length) + } + + length -= cnt + if dd.availWrite() == 0 { + got.Write(dd.readFlush()) + } + } + } + var writeString = func(str string) { + for len(str) > 0 { + cnt := copy(dd.writeSlice(), str) + str = str[cnt:] + dd.writeMark(cnt) + if dd.availWrite() == 0 { + got.Write(dd.readFlush()) + } + } + } + + writeString(".") + want.WriteByte('.') + + str := poem + for _, ref := range poemRefs { + if ref.dist == 0 { + writeString(str[:ref.length]) + } else { + writeCopy(ref.dist, ref.length) + } + str = str[ref.length:] + } + want.WriteString(poem) + + writeCopy(dd.histSize(), 33) + want.Write(want.Bytes()[:33]) + + writeString(abc) + writeCopy(len(abc), 59*len(abc)) + want.WriteString(strings.Repeat(abc, 60)) + + writeString(fox) + writeCopy(len(fox), 9*len(fox)) + want.WriteString(strings.Repeat(fox, 10)) + + writeString(".") + writeCopy(1, 9) + want.WriteString(strings.Repeat(".", 10)) + + writeString(strings.ToUpper(poem)) + writeCopy(len(poem), 7*len(poem)) + want.WriteString(strings.Repeat(strings.ToUpper(poem), 8)) + + writeCopy(dd.histSize(), 10) + want.Write(want.Bytes()[want.Len()-dd.histSize():][:10]) + + got.Write(dd.readFlush()) + if got.String() != want.String() { + t.Errorf("final string mismatch:\ngot %q\nwant %q", got.String(), want.String()) + } +} diff --git a/src/compress/flate/example_test.go b/src/compress/flate/example_test.go new file mode 100644 index 0000000..5780092 --- /dev/null +++ b/src/compress/flate/example_test.go @@ -0,0 +1,243 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate_test + +import ( + "bytes" + "compress/flate" + "fmt" + "io" + "log" + "os" + "strings" + "sync" +) + +// In performance critical applications, Reset can be used to discard the +// current compressor or decompressor state and reinitialize them quickly +// by taking advantage of previously allocated memory. +func Example_reset() { + proverbs := []string{ + "Don't communicate by sharing memory, share memory by communicating.\n", + "Concurrency is not parallelism.\n", + "The bigger the interface, the weaker the abstraction.\n", + "Documentation is for users.\n", + } + + var r strings.Reader + var b bytes.Buffer + buf := make([]byte, 32<<10) + + zw, err := flate.NewWriter(nil, flate.DefaultCompression) + if err != nil { + log.Fatal(err) + } + zr := flate.NewReader(nil) + + for _, s := range proverbs { + r.Reset(s) + b.Reset() + + // Reset the compressor and encode from some input stream. + zw.Reset(&b) + if _, err := io.CopyBuffer(zw, &r, buf); err != nil { + log.Fatal(err) + } + if err := zw.Close(); err != nil { + log.Fatal(err) + } + + // Reset the decompressor and decode to some output stream. + if err := zr.(flate.Resetter).Reset(&b, nil); err != nil { + log.Fatal(err) + } + if _, err := io.CopyBuffer(os.Stdout, zr, buf); err != nil { + log.Fatal(err) + } + if err := zr.Close(); err != nil { + log.Fatal(err) + } + } + + // Output: + // Don't communicate by sharing memory, share memory by communicating. + // Concurrency is not parallelism. + // The bigger the interface, the weaker the abstraction. + // Documentation is for users. +} + +// A preset dictionary can be used to improve the compression ratio. +// The downside to using a dictionary is that the compressor and decompressor +// must agree in advance what dictionary to use. +func Example_dictionary() { + // The dictionary is a string of bytes. When compressing some input data, + // the compressor will attempt to substitute substrings with matches found + // in the dictionary. As such, the dictionary should only contain substrings + // that are expected to be found in the actual data stream. + const dict = `<?xml version="1.0"?>` + `<book>` + `<data>` + `<meta name="` + `" content="` + + // The data to compress should (but is not required to) contain frequent + // substrings that match those in the dictionary. + const data = `<?xml version="1.0"?> +<book> + <meta name="title" content="The Go Programming Language"/> + <meta name="authors" content="Alan Donovan and Brian Kernighan"/> + <meta name="published" content="2015-10-26"/> + <meta name="isbn" content="978-0134190440"/> + <data>...</data> +</book> +` + + var b bytes.Buffer + + // Compress the data using the specially crafted dictionary. + zw, err := flate.NewWriterDict(&b, flate.DefaultCompression, []byte(dict)) + if err != nil { + log.Fatal(err) + } + if _, err := io.Copy(zw, strings.NewReader(data)); err != nil { + log.Fatal(err) + } + if err := zw.Close(); err != nil { + log.Fatal(err) + } + + // The decompressor must use the same dictionary as the compressor. + // Otherwise, the input may appear as corrupted. + fmt.Println("Decompressed output using the dictionary:") + zr := flate.NewReaderDict(bytes.NewReader(b.Bytes()), []byte(dict)) + if _, err := io.Copy(os.Stdout, zr); err != nil { + log.Fatal(err) + } + if err := zr.Close(); err != nil { + log.Fatal(err) + } + + fmt.Println() + + // Substitute all of the bytes in the dictionary with a '#' to visually + // demonstrate the approximate effectiveness of using a preset dictionary. + fmt.Println("Substrings matched by the dictionary are marked with #:") + hashDict := []byte(dict) + for i := range hashDict { + hashDict[i] = '#' + } + zr = flate.NewReaderDict(&b, hashDict) + if _, err := io.Copy(os.Stdout, zr); err != nil { + log.Fatal(err) + } + if err := zr.Close(); err != nil { + log.Fatal(err) + } + + // Output: + // Decompressed output using the dictionary: + // <?xml version="1.0"?> + // <book> + // <meta name="title" content="The Go Programming Language"/> + // <meta name="authors" content="Alan Donovan and Brian Kernighan"/> + // <meta name="published" content="2015-10-26"/> + // <meta name="isbn" content="978-0134190440"/> + // <data>...</data> + // </book> + // + // Substrings matched by the dictionary are marked with #: + // ##################### + // ###### + // ############title###########The Go Programming Language"/# + // ############authors###########Alan Donovan and Brian Kernighan"/# + // ############published###########2015-10-26"/# + // ############isbn###########978-0134190440"/# + // ######...</##### + // </##### +} + +// DEFLATE is suitable for transmitting compressed data across the network. +func Example_synchronization() { + var wg sync.WaitGroup + defer wg.Wait() + + // Use io.Pipe to simulate a network connection. + // A real network application should take care to properly close the + // underlying connection. + rp, wp := io.Pipe() + + // Start a goroutine to act as the transmitter. + wg.Add(1) + go func() { + defer wg.Done() + + zw, err := flate.NewWriter(wp, flate.BestSpeed) + if err != nil { + log.Fatal(err) + } + + b := make([]byte, 256) + for _, m := range strings.Fields("A long time ago in a galaxy far, far away...") { + // We use a simple framing format where the first byte is the + // message length, followed the message itself. + b[0] = uint8(copy(b[1:], m)) + + if _, err := zw.Write(b[:1+len(m)]); err != nil { + log.Fatal(err) + } + + // Flush ensures that the receiver can read all data sent so far. + if err := zw.Flush(); err != nil { + log.Fatal(err) + } + } + + if err := zw.Close(); err != nil { + log.Fatal(err) + } + }() + + // Start a goroutine to act as the receiver. + wg.Add(1) + go func() { + defer wg.Done() + + zr := flate.NewReader(rp) + + b := make([]byte, 256) + for { + // Read the message length. + // This is guaranteed to return for every corresponding + // Flush and Close on the transmitter side. + if _, err := io.ReadFull(zr, b[:1]); err != nil { + if err == io.EOF { + break // The transmitter closed the stream + } + log.Fatal(err) + } + + // Read the message content. + n := int(b[0]) + if _, err := io.ReadFull(zr, b[:n]); err != nil { + log.Fatal(err) + } + + fmt.Printf("Received %d bytes: %s\n", n, b[:n]) + } + fmt.Println() + + if err := zr.Close(); err != nil { + log.Fatal(err) + } + }() + + // Output: + // Received 1 bytes: A + // Received 4 bytes: long + // Received 4 bytes: time + // Received 3 bytes: ago + // Received 2 bytes: in + // Received 1 bytes: a + // Received 6 bytes: galaxy + // Received 4 bytes: far, + // Received 3 bytes: far + // Received 7 bytes: away... +} diff --git a/src/compress/flate/flate_test.go b/src/compress/flate/flate_test.go new file mode 100644 index 0000000..23f4c47 --- /dev/null +++ b/src/compress/flate/flate_test.go @@ -0,0 +1,352 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This test tests some internals of the flate package. +// The tests in package compress/gzip serve as the +// end-to-end test of the decompressor. + +package flate + +import ( + "bytes" + "encoding/hex" + "io" + "strings" + "testing" +) + +// The following test should not panic. +func TestIssue5915(t *testing.T) { + bits := []int{4, 0, 0, 6, 4, 3, 2, 3, 3, 4, 4, 5, 0, 0, 0, 0, 5, 5, 6, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 7, 8, 6, 0, 11, 0, 8, 0, 6, 6, 10, 8} + var h huffmanDecoder + if h.init(bits) { + t.Fatalf("Given sequence of bits is bad, and should not succeed.") + } +} + +// The following test should not panic. +func TestIssue5962(t *testing.T) { + bits := []int{4, 0, 0, 6, 4, 3, 2, 3, 3, 4, 4, 5, 0, 0, 0, 0, + 5, 5, 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 11} + var h huffmanDecoder + if h.init(bits) { + t.Fatalf("Given sequence of bits is bad, and should not succeed.") + } +} + +// The following test should not panic. +func TestIssue6255(t *testing.T) { + bits1 := []int{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 11} + bits2 := []int{11, 13} + var h huffmanDecoder + if !h.init(bits1) { + t.Fatalf("Given sequence of bits is good and should succeed.") + } + if h.init(bits2) { + t.Fatalf("Given sequence of bits is bad and should not succeed.") + } +} + +func TestInvalidEncoding(t *testing.T) { + // Initialize Huffman decoder to recognize "0". + var h huffmanDecoder + if !h.init([]int{1}) { + t.Fatal("Failed to initialize Huffman decoder") + } + + // Initialize decompressor with invalid Huffman coding. + var f decompressor + f.r = bytes.NewReader([]byte{0xff}) + + _, err := f.huffSym(&h) + if err == nil { + t.Fatal("Should have rejected invalid bit sequence") + } +} + +func TestInvalidBits(t *testing.T) { + oversubscribed := []int{1, 2, 3, 4, 4, 5} + incomplete := []int{1, 2, 4, 4} + var h huffmanDecoder + if h.init(oversubscribed) { + t.Fatal("Should reject oversubscribed bit-length set") + } + if h.init(incomplete) { + t.Fatal("Should reject incomplete bit-length set") + } +} + +func TestStreams(t *testing.T) { + // To verify any of these hexstrings as valid or invalid flate streams + // according to the C zlib library, you can use the Python wrapper library: + // >>> hex_string = "010100feff11" + // >>> import zlib + // >>> zlib.decompress(hex_string.decode("hex"), -15) # Negative means raw DEFLATE + // '\x11' + + testCases := []struct { + desc string // Description of the stream + stream string // Hexstring of the input DEFLATE stream + want string // Expected result. Use "fail" to expect failure + }{{ + "degenerate HCLenTree", + "05e0010000000000100000000000000000000000000000000000000000000000" + + "00000000000000000004", + "fail", + }, { + "complete HCLenTree, empty HLitTree, empty HDistTree", + "05e0010400000000000000000000000000000000000000000000000000000000" + + "00000000000000000010", + "fail", + }, { + "empty HCLenTree", + "05e0010000000000000000000000000000000000000000000000000000000000" + + "00000000000000000010", + "fail", + }, { + "complete HCLenTree, complete HLitTree, empty HDistTree, use missing HDist symbol", + "000100feff000de0010400000000100000000000000000000000000000000000" + + "0000000000000000000000000000002c", + "fail", + }, { + "complete HCLenTree, complete HLitTree, degenerate HDistTree, use missing HDist symbol", + "000100feff000de0010000000000000000000000000000000000000000000000" + + "00000000000000000610000000004070", + "fail", + }, { + "complete HCLenTree, empty HLitTree, empty HDistTree", + "05e0010400000000100400000000000000000000000000000000000000000000" + + "0000000000000000000000000008", + "fail", + }, { + "complete HCLenTree, empty HLitTree, degenerate HDistTree", + "05e0010400000000100400000000000000000000000000000000000000000000" + + "0000000000000000000800000008", + "fail", + }, { + "complete HCLenTree, degenerate HLitTree, degenerate HDistTree, use missing HLit symbol", + "05e0010400000000100000000000000000000000000000000000000000000000" + + "0000000000000000001c", + "fail", + }, { + "complete HCLenTree, complete HLitTree, too large HDistTree", + "edff870500000000200400000000000000000000000000000000000000000000" + + "000000000000000000080000000000000004", + "fail", + }, { + "complete HCLenTree, complete HLitTree, empty HDistTree, excessive repeater code", + "edfd870500000000200400000000000000000000000000000000000000000000" + + "000000000000000000e8b100", + "fail", + }, { + "complete HCLenTree, complete HLitTree, empty HDistTree of normal length 30", + "05fd01240000000000f8ffffffffffffffffffffffffffffffffffffffffffff" + + "ffffffffffffffffff07000000fe01", + "", + }, { + "complete HCLenTree, complete HLitTree, empty HDistTree of excessive length 31", + "05fe01240000000000f8ffffffffffffffffffffffffffffffffffffffffffff" + + "ffffffffffffffffff07000000fc03", + "fail", + }, { + "complete HCLenTree, over-subscribed HLitTree, empty HDistTree", + "05e001240000000000fcffffffffffffffffffffffffffffffffffffffffffff" + + "ffffffffffffffffff07f00f", + "fail", + }, { + "complete HCLenTree, under-subscribed HLitTree, empty HDistTree", + "05e001240000000000fcffffffffffffffffffffffffffffffffffffffffffff" + + "fffffffffcffffffff07f00f", + "fail", + }, { + "complete HCLenTree, complete HLitTree with single code, empty HDistTree", + "05e001240000000000f8ffffffffffffffffffffffffffffffffffffffffffff" + + "ffffffffffffffffff07f00f", + "01", + }, { + "complete HCLenTree, complete HLitTree with multiple codes, empty HDistTree", + "05e301240000000000f8ffffffffffffffffffffffffffffffffffffffffffff" + + "ffffffffffffffffff07807f", + "01", + }, { + "complete HCLenTree, complete HLitTree, degenerate HDistTree, use valid HDist symbol", + "000100feff000de0010400000000100000000000000000000000000000000000" + + "0000000000000000000000000000003c", + "00000000", + }, { + "complete HCLenTree, degenerate HLitTree, degenerate HDistTree", + "05e0010400000000100000000000000000000000000000000000000000000000" + + "0000000000000000000c", + "", + }, { + "complete HCLenTree, degenerate HLitTree, empty HDistTree", + "05e0010400000000100000000000000000000000000000000000000000000000" + + "00000000000000000004", + "", + }, { + "complete HCLenTree, complete HLitTree, empty HDistTree, spanning repeater code", + "edfd870500000000200400000000000000000000000000000000000000000000" + + "000000000000000000e8b000", + "", + }, { + "complete HCLenTree with length codes, complete HLitTree, empty HDistTree", + "ede0010400000000100000000000000000000000000000000000000000000000" + + "0000000000000000000400004000", + "", + }, { + "complete HCLenTree, complete HLitTree, degenerate HDistTree, use valid HLit symbol 284 with count 31", + "000100feff00ede0010400000000100000000000000000000000000000000000" + + "000000000000000000000000000000040000407f00", + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "0000000000000000000000000000000000000000000000000000000000000000" + + "000000", + }, { + "complete HCLenTree, complete HLitTree, degenerate HDistTree, use valid HLit and HDist symbols", + "0cc2010d00000082b0ac4aff0eb07d27060000ffff", + "616263616263", + }, { + "fixed block, use reserved symbol 287", + "33180700", + "fail", + }, { + "raw block", + "010100feff11", + "11", + }, { + "issue 10426 - over-subscribed HCLenTree causes a hang", + "344c4a4e494d4b070000ff2e2eff2e2e2e2e2eff", + "fail", + }, { + "issue 11030 - empty HDistTree unexpectedly leads to error", + "05c0070600000080400fff37a0ca", + "", + }, { + "issue 11033 - empty HDistTree unexpectedly leads to error", + "050fb109c020cca5d017dcbca044881ee1034ec149c8980bbc413c2ab35be9dc" + + "b1473449922449922411202306ee97b0383a521b4ffdcf3217f9f7d3adb701", + "3130303634342068652e706870005d05355f7ed957ff084a90925d19e3ebc6d0" + + "c6d7", + }} + + for i, tc := range testCases { + data, err := hex.DecodeString(tc.stream) + if err != nil { + t.Fatal(err) + } + data, err = io.ReadAll(NewReader(bytes.NewReader(data))) + if tc.want == "fail" { + if err == nil { + t.Errorf("#%d (%s): got nil error, want non-nil", i, tc.desc) + } + } else { + if err != nil { + t.Errorf("#%d (%s): %v", i, tc.desc, err) + continue + } + if got := hex.EncodeToString(data); got != tc.want { + t.Errorf("#%d (%s):\ngot %q\nwant %q", i, tc.desc, got, tc.want) + } + + } + } +} + +func TestTruncatedStreams(t *testing.T) { + const data = "\x00\f\x00\xf3\xffhello, world\x01\x00\x00\xff\xff" + + for i := 0; i < len(data)-1; i++ { + r := NewReader(strings.NewReader(data[:i])) + _, err := io.Copy(io.Discard, r) + if err != io.ErrUnexpectedEOF { + t.Errorf("io.Copy(%d) on truncated stream: got %v, want %v", i, err, io.ErrUnexpectedEOF) + } + } +} + +// Verify that flate.Reader.Read returns (n, io.EOF) instead +// of (n, nil) + (0, io.EOF) when possible. +// +// This helps net/http.Transport reuse HTTP/1 connections more +// aggressively. +// +// See https://github.com/google/go-github/pull/317 for background. +func TestReaderEarlyEOF(t *testing.T) { + t.Parallel() + testSizes := []int{ + 1, 2, 3, 4, 5, 6, 7, 8, + 100, 1000, 10000, 100000, + 128, 1024, 16384, 131072, + + // Testing multiples of windowSize triggers the case + // where Read will fail to return an early io.EOF. + windowSize * 1, windowSize * 2, windowSize * 3, + } + + var maxSize int + for _, n := range testSizes { + if maxSize < n { + maxSize = n + } + } + + readBuf := make([]byte, 40) + data := make([]byte, maxSize) + for i := range data { + data[i] = byte(i) + } + + for _, sz := range testSizes { + if testing.Short() && sz > windowSize { + continue + } + for _, flush := range []bool{true, false} { + earlyEOF := true // Do we expect early io.EOF? + + var buf bytes.Buffer + w, _ := NewWriter(&buf, 5) + w.Write(data[:sz]) + if flush { + // If a Flush occurs after all the actual data, the flushing + // semantics dictate that we will observe a (0, io.EOF) since + // Read must return data before it knows that the stream ended. + w.Flush() + earlyEOF = false + } + w.Close() + + r := NewReader(&buf) + for { + n, err := r.Read(readBuf) + if err == io.EOF { + // If the availWrite == windowSize, then that means that the + // previous Read returned because the write buffer was full + // and it just so happened that the stream had no more data. + // This situation is rare, but unavoidable. + if r.(*decompressor).dict.availWrite() == windowSize { + earlyEOF = false + } + + if n == 0 && earlyEOF { + t.Errorf("On size:%d flush:%v, Read() = (0, io.EOF), want (n, io.EOF)", sz, flush) + } + if n != 0 && !earlyEOF { + t.Errorf("On size:%d flush:%v, Read() = (%d, io.EOF), want (0, io.EOF)", sz, flush, n) + } + break + } + if err != nil { + t.Fatal(err) + } + } + } + } +} diff --git a/src/compress/flate/huffman_bit_writer.go b/src/compress/flate/huffman_bit_writer.go new file mode 100644 index 0000000..0056375 --- /dev/null +++ b/src/compress/flate/huffman_bit_writer.go @@ -0,0 +1,701 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "io" +) + +const ( + // The largest offset code. + offsetCodeCount = 30 + + // The special code used to mark the end of a block. + endBlockMarker = 256 + + // The first length code. + lengthCodesStart = 257 + + // The number of codegen codes. + codegenCodeCount = 19 + badCode = 255 + + // bufferFlushSize indicates the buffer size + // after which bytes are flushed to the writer. + // Should preferably be a multiple of 6, since + // we accumulate 6 bytes between writes to the buffer. + bufferFlushSize = 240 + + // bufferSize is the actual output byte buffer size. + // It must have additional headroom for a flush + // which can contain up to 8 bytes. + bufferSize = bufferFlushSize + 8 +) + +// The number of extra bits needed by length code X - LENGTH_CODES_START. +var lengthExtraBits = []int8{ + /* 257 */ 0, 0, 0, + /* 260 */ 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, + /* 270 */ 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, + /* 280 */ 4, 5, 5, 5, 5, 0, +} + +// The length indicated by length code X - LENGTH_CODES_START. +var lengthBase = []uint32{ + 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, + 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, + 64, 80, 96, 112, 128, 160, 192, 224, 255, +} + +// offset code word extra bits. +var offsetExtraBits = []int8{ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, + 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, + 9, 9, 10, 10, 11, 11, 12, 12, 13, 13, +} + +var offsetBase = []uint32{ + 0x000000, 0x000001, 0x000002, 0x000003, 0x000004, + 0x000006, 0x000008, 0x00000c, 0x000010, 0x000018, + 0x000020, 0x000030, 0x000040, 0x000060, 0x000080, + 0x0000c0, 0x000100, 0x000180, 0x000200, 0x000300, + 0x000400, 0x000600, 0x000800, 0x000c00, 0x001000, + 0x001800, 0x002000, 0x003000, 0x004000, 0x006000, +} + +// The odd order in which the codegen code sizes are written. +var codegenOrder = []uint32{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15} + +type huffmanBitWriter struct { + // writer is the underlying writer. + // Do not use it directly; use the write method, which ensures + // that Write errors are sticky. + writer io.Writer + + // Data waiting to be written is bytes[0:nbytes] + // and then the low nbits of bits. Data is always written + // sequentially into the bytes array. + bits uint64 + nbits uint + bytes [bufferSize]byte + codegenFreq [codegenCodeCount]int32 + nbytes int + literalFreq []int32 + offsetFreq []int32 + codegen []uint8 + literalEncoding *huffmanEncoder + offsetEncoding *huffmanEncoder + codegenEncoding *huffmanEncoder + err error +} + +func newHuffmanBitWriter(w io.Writer) *huffmanBitWriter { + return &huffmanBitWriter{ + writer: w, + literalFreq: make([]int32, maxNumLit), + offsetFreq: make([]int32, offsetCodeCount), + codegen: make([]uint8, maxNumLit+offsetCodeCount+1), + literalEncoding: newHuffmanEncoder(maxNumLit), + codegenEncoding: newHuffmanEncoder(codegenCodeCount), + offsetEncoding: newHuffmanEncoder(offsetCodeCount), + } +} + +func (w *huffmanBitWriter) reset(writer io.Writer) { + w.writer = writer + w.bits, w.nbits, w.nbytes, w.err = 0, 0, 0, nil +} + +func (w *huffmanBitWriter) flush() { + if w.err != nil { + w.nbits = 0 + return + } + n := w.nbytes + for w.nbits != 0 { + w.bytes[n] = byte(w.bits) + w.bits >>= 8 + if w.nbits > 8 { // Avoid underflow + w.nbits -= 8 + } else { + w.nbits = 0 + } + n++ + } + w.bits = 0 + w.write(w.bytes[:n]) + w.nbytes = 0 +} + +func (w *huffmanBitWriter) write(b []byte) { + if w.err != nil { + return + } + _, w.err = w.writer.Write(b) +} + +func (w *huffmanBitWriter) writeBits(b int32, nb uint) { + if w.err != nil { + return + } + w.bits |= uint64(b) << w.nbits + w.nbits += nb + if w.nbits >= 48 { + bits := w.bits + w.bits >>= 48 + w.nbits -= 48 + n := w.nbytes + bytes := w.bytes[n : n+6] + bytes[0] = byte(bits) + bytes[1] = byte(bits >> 8) + bytes[2] = byte(bits >> 16) + bytes[3] = byte(bits >> 24) + bytes[4] = byte(bits >> 32) + bytes[5] = byte(bits >> 40) + n += 6 + if n >= bufferFlushSize { + w.write(w.bytes[:n]) + n = 0 + } + w.nbytes = n + } +} + +func (w *huffmanBitWriter) writeBytes(bytes []byte) { + if w.err != nil { + return + } + n := w.nbytes + if w.nbits&7 != 0 { + w.err = InternalError("writeBytes with unfinished bits") + return + } + for w.nbits != 0 { + w.bytes[n] = byte(w.bits) + w.bits >>= 8 + w.nbits -= 8 + n++ + } + if n != 0 { + w.write(w.bytes[:n]) + } + w.nbytes = 0 + w.write(bytes) +} + +// RFC 1951 3.2.7 specifies a special run-length encoding for specifying +// the literal and offset lengths arrays (which are concatenated into a single +// array). This method generates that run-length encoding. +// +// The result is written into the codegen array, and the frequencies +// of each code is written into the codegenFreq array. +// Codes 0-15 are single byte codes. Codes 16-18 are followed by additional +// information. Code badCode is an end marker +// +// numLiterals The number of literals in literalEncoding +// numOffsets The number of offsets in offsetEncoding +// litenc, offenc The literal and offset encoder to use +func (w *huffmanBitWriter) generateCodegen(numLiterals int, numOffsets int, litEnc, offEnc *huffmanEncoder) { + for i := range w.codegenFreq { + w.codegenFreq[i] = 0 + } + // Note that we are using codegen both as a temporary variable for holding + // a copy of the frequencies, and as the place where we put the result. + // This is fine because the output is always shorter than the input used + // so far. + codegen := w.codegen // cache + // Copy the concatenated code sizes to codegen. Put a marker at the end. + cgnl := codegen[:numLiterals] + for i := range cgnl { + cgnl[i] = uint8(litEnc.codes[i].len) + } + + cgnl = codegen[numLiterals : numLiterals+numOffsets] + for i := range cgnl { + cgnl[i] = uint8(offEnc.codes[i].len) + } + codegen[numLiterals+numOffsets] = badCode + + size := codegen[0] + count := 1 + outIndex := 0 + for inIndex := 1; size != badCode; inIndex++ { + // INVARIANT: We have seen "count" copies of size that have not yet + // had output generated for them. + nextSize := codegen[inIndex] + if nextSize == size { + count++ + continue + } + // We need to generate codegen indicating "count" of size. + if size != 0 { + codegen[outIndex] = size + outIndex++ + w.codegenFreq[size]++ + count-- + for count >= 3 { + n := 6 + if n > count { + n = count + } + codegen[outIndex] = 16 + outIndex++ + codegen[outIndex] = uint8(n - 3) + outIndex++ + w.codegenFreq[16]++ + count -= n + } + } else { + for count >= 11 { + n := 138 + if n > count { + n = count + } + codegen[outIndex] = 18 + outIndex++ + codegen[outIndex] = uint8(n - 11) + outIndex++ + w.codegenFreq[18]++ + count -= n + } + if count >= 3 { + // count >= 3 && count <= 10 + codegen[outIndex] = 17 + outIndex++ + codegen[outIndex] = uint8(count - 3) + outIndex++ + w.codegenFreq[17]++ + count = 0 + } + } + count-- + for ; count >= 0; count-- { + codegen[outIndex] = size + outIndex++ + w.codegenFreq[size]++ + } + // Set up invariant for next time through the loop. + size = nextSize + count = 1 + } + // Marker indicating the end of the codegen. + codegen[outIndex] = badCode +} + +// dynamicSize returns the size of dynamically encoded data in bits. +func (w *huffmanBitWriter) dynamicSize(litEnc, offEnc *huffmanEncoder, extraBits int) (size, numCodegens int) { + numCodegens = len(w.codegenFreq) + for numCodegens > 4 && w.codegenFreq[codegenOrder[numCodegens-1]] == 0 { + numCodegens-- + } + header := 3 + 5 + 5 + 4 + (3 * numCodegens) + + w.codegenEncoding.bitLength(w.codegenFreq[:]) + + int(w.codegenFreq[16])*2 + + int(w.codegenFreq[17])*3 + + int(w.codegenFreq[18])*7 + size = header + + litEnc.bitLength(w.literalFreq) + + offEnc.bitLength(w.offsetFreq) + + extraBits + + return size, numCodegens +} + +// fixedSize returns the size of dynamically encoded data in bits. +func (w *huffmanBitWriter) fixedSize(extraBits int) int { + return 3 + + fixedLiteralEncoding.bitLength(w.literalFreq) + + fixedOffsetEncoding.bitLength(w.offsetFreq) + + extraBits +} + +// storedSize calculates the stored size, including header. +// The function returns the size in bits and whether the block +// fits inside a single block. +func (w *huffmanBitWriter) storedSize(in []byte) (int, bool) { + if in == nil { + return 0, false + } + if len(in) <= maxStoreBlockSize { + return (len(in) + 5) * 8, true + } + return 0, false +} + +func (w *huffmanBitWriter) writeCode(c hcode) { + if w.err != nil { + return + } + w.bits |= uint64(c.code) << w.nbits + w.nbits += uint(c.len) + if w.nbits >= 48 { + bits := w.bits + w.bits >>= 48 + w.nbits -= 48 + n := w.nbytes + bytes := w.bytes[n : n+6] + bytes[0] = byte(bits) + bytes[1] = byte(bits >> 8) + bytes[2] = byte(bits >> 16) + bytes[3] = byte(bits >> 24) + bytes[4] = byte(bits >> 32) + bytes[5] = byte(bits >> 40) + n += 6 + if n >= bufferFlushSize { + w.write(w.bytes[:n]) + n = 0 + } + w.nbytes = n + } +} + +// Write the header of a dynamic Huffman block to the output stream. +// +// numLiterals The number of literals specified in codegen +// numOffsets The number of offsets specified in codegen +// numCodegens The number of codegens used in codegen +func (w *huffmanBitWriter) writeDynamicHeader(numLiterals int, numOffsets int, numCodegens int, isEof bool) { + if w.err != nil { + return + } + var firstBits int32 = 4 + if isEof { + firstBits = 5 + } + w.writeBits(firstBits, 3) + w.writeBits(int32(numLiterals-257), 5) + w.writeBits(int32(numOffsets-1), 5) + w.writeBits(int32(numCodegens-4), 4) + + for i := 0; i < numCodegens; i++ { + value := uint(w.codegenEncoding.codes[codegenOrder[i]].len) + w.writeBits(int32(value), 3) + } + + i := 0 + for { + var codeWord int = int(w.codegen[i]) + i++ + if codeWord == badCode { + break + } + w.writeCode(w.codegenEncoding.codes[uint32(codeWord)]) + + switch codeWord { + case 16: + w.writeBits(int32(w.codegen[i]), 2) + i++ + case 17: + w.writeBits(int32(w.codegen[i]), 3) + i++ + case 18: + w.writeBits(int32(w.codegen[i]), 7) + i++ + } + } +} + +func (w *huffmanBitWriter) writeStoredHeader(length int, isEof bool) { + if w.err != nil { + return + } + var flag int32 + if isEof { + flag = 1 + } + w.writeBits(flag, 3) + w.flush() + w.writeBits(int32(length), 16) + w.writeBits(int32(^uint16(length)), 16) +} + +func (w *huffmanBitWriter) writeFixedHeader(isEof bool) { + if w.err != nil { + return + } + // Indicate that we are a fixed Huffman block + var value int32 = 2 + if isEof { + value = 3 + } + w.writeBits(value, 3) +} + +// writeBlock will write a block of tokens with the smallest encoding. +// The original input can be supplied, and if the huffman encoded data +// is larger than the original bytes, the data will be written as a +// stored block. +// If the input is nil, the tokens will always be Huffman encoded. +func (w *huffmanBitWriter) writeBlock(tokens []token, eof bool, input []byte) { + if w.err != nil { + return + } + + tokens = append(tokens, endBlockMarker) + numLiterals, numOffsets := w.indexTokens(tokens) + + var extraBits int + storedSize, storable := w.storedSize(input) + if storable { + // We only bother calculating the costs of the extra bits required by + // the length of offset fields (which will be the same for both fixed + // and dynamic encoding), if we need to compare those two encodings + // against stored encoding. + for lengthCode := lengthCodesStart + 8; lengthCode < numLiterals; lengthCode++ { + // First eight length codes have extra size = 0. + extraBits += int(w.literalFreq[lengthCode]) * int(lengthExtraBits[lengthCode-lengthCodesStart]) + } + for offsetCode := 4; offsetCode < numOffsets; offsetCode++ { + // First four offset codes have extra size = 0. + extraBits += int(w.offsetFreq[offsetCode]) * int(offsetExtraBits[offsetCode]) + } + } + + // Figure out smallest code. + // Fixed Huffman baseline. + var literalEncoding = fixedLiteralEncoding + var offsetEncoding = fixedOffsetEncoding + var size = w.fixedSize(extraBits) + + // Dynamic Huffman? + var numCodegens int + + // Generate codegen and codegenFrequencies, which indicates how to encode + // the literalEncoding and the offsetEncoding. + w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, w.offsetEncoding) + w.codegenEncoding.generate(w.codegenFreq[:], 7) + dynamicSize, numCodegens := w.dynamicSize(w.literalEncoding, w.offsetEncoding, extraBits) + + if dynamicSize < size { + size = dynamicSize + literalEncoding = w.literalEncoding + offsetEncoding = w.offsetEncoding + } + + // Stored bytes? + if storable && storedSize < size { + w.writeStoredHeader(len(input), eof) + w.writeBytes(input) + return + } + + // Huffman. + if literalEncoding == fixedLiteralEncoding { + w.writeFixedHeader(eof) + } else { + w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof) + } + + // Write the tokens. + w.writeTokens(tokens, literalEncoding.codes, offsetEncoding.codes) +} + +// writeBlockDynamic encodes a block using a dynamic Huffman table. +// This should be used if the symbols used have a disproportionate +// histogram distribution. +// If input is supplied and the compression savings are below 1/16th of the +// input size the block is stored. +func (w *huffmanBitWriter) writeBlockDynamic(tokens []token, eof bool, input []byte) { + if w.err != nil { + return + } + + tokens = append(tokens, endBlockMarker) + numLiterals, numOffsets := w.indexTokens(tokens) + + // Generate codegen and codegenFrequencies, which indicates how to encode + // the literalEncoding and the offsetEncoding. + w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, w.offsetEncoding) + w.codegenEncoding.generate(w.codegenFreq[:], 7) + size, numCodegens := w.dynamicSize(w.literalEncoding, w.offsetEncoding, 0) + + // Store bytes, if we don't get a reasonable improvement. + if ssize, storable := w.storedSize(input); storable && ssize < (size+size>>4) { + w.writeStoredHeader(len(input), eof) + w.writeBytes(input) + return + } + + // Write Huffman table. + w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof) + + // Write the tokens. + w.writeTokens(tokens, w.literalEncoding.codes, w.offsetEncoding.codes) +} + +// indexTokens indexes a slice of tokens, and updates +// literalFreq and offsetFreq, and generates literalEncoding +// and offsetEncoding. +// The number of literal and offset tokens is returned. +func (w *huffmanBitWriter) indexTokens(tokens []token) (numLiterals, numOffsets int) { + for i := range w.literalFreq { + w.literalFreq[i] = 0 + } + for i := range w.offsetFreq { + w.offsetFreq[i] = 0 + } + + for _, t := range tokens { + if t < matchType { + w.literalFreq[t.literal()]++ + continue + } + length := t.length() + offset := t.offset() + w.literalFreq[lengthCodesStart+lengthCode(length)]++ + w.offsetFreq[offsetCode(offset)]++ + } + + // get the number of literals + numLiterals = len(w.literalFreq) + for w.literalFreq[numLiterals-1] == 0 { + numLiterals-- + } + // get the number of offsets + numOffsets = len(w.offsetFreq) + for numOffsets > 0 && w.offsetFreq[numOffsets-1] == 0 { + numOffsets-- + } + if numOffsets == 0 { + // We haven't found a single match. If we want to go with the dynamic encoding, + // we should count at least one offset to be sure that the offset huffman tree could be encoded. + w.offsetFreq[0] = 1 + numOffsets = 1 + } + w.literalEncoding.generate(w.literalFreq, 15) + w.offsetEncoding.generate(w.offsetFreq, 15) + return +} + +// writeTokens writes a slice of tokens to the output. +// codes for literal and offset encoding must be supplied. +func (w *huffmanBitWriter) writeTokens(tokens []token, leCodes, oeCodes []hcode) { + if w.err != nil { + return + } + for _, t := range tokens { + if t < matchType { + w.writeCode(leCodes[t.literal()]) + continue + } + // Write the length + length := t.length() + lengthCode := lengthCode(length) + w.writeCode(leCodes[lengthCode+lengthCodesStart]) + extraLengthBits := uint(lengthExtraBits[lengthCode]) + if extraLengthBits > 0 { + extraLength := int32(length - lengthBase[lengthCode]) + w.writeBits(extraLength, extraLengthBits) + } + // Write the offset + offset := t.offset() + offsetCode := offsetCode(offset) + w.writeCode(oeCodes[offsetCode]) + extraOffsetBits := uint(offsetExtraBits[offsetCode]) + if extraOffsetBits > 0 { + extraOffset := int32(offset - offsetBase[offsetCode]) + w.writeBits(extraOffset, extraOffsetBits) + } + } +} + +// huffOffset is a static offset encoder used for huffman only encoding. +// It can be reused since we will not be encoding offset values. +var huffOffset *huffmanEncoder + +func init() { + offsetFreq := make([]int32, offsetCodeCount) + offsetFreq[0] = 1 + huffOffset = newHuffmanEncoder(offsetCodeCount) + huffOffset.generate(offsetFreq, 15) +} + +// writeBlockHuff encodes a block of bytes as either +// Huffman encoded literals or uncompressed bytes if the +// results only gains very little from compression. +func (w *huffmanBitWriter) writeBlockHuff(eof bool, input []byte) { + if w.err != nil { + return + } + + // Clear histogram + for i := range w.literalFreq { + w.literalFreq[i] = 0 + } + + // Add everything as literals + histogram(input, w.literalFreq) + + w.literalFreq[endBlockMarker] = 1 + + const numLiterals = endBlockMarker + 1 + w.offsetFreq[0] = 1 + const numOffsets = 1 + + w.literalEncoding.generate(w.literalFreq, 15) + + // Figure out smallest code. + // Always use dynamic Huffman or Store + var numCodegens int + + // Generate codegen and codegenFrequencies, which indicates how to encode + // the literalEncoding and the offsetEncoding. + w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, huffOffset) + w.codegenEncoding.generate(w.codegenFreq[:], 7) + size, numCodegens := w.dynamicSize(w.literalEncoding, huffOffset, 0) + + // Store bytes, if we don't get a reasonable improvement. + if ssize, storable := w.storedSize(input); storable && ssize < (size+size>>4) { + w.writeStoredHeader(len(input), eof) + w.writeBytes(input) + return + } + + // Huffman. + w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof) + encoding := w.literalEncoding.codes[:257] + n := w.nbytes + for _, t := range input { + // Bitwriting inlined, ~30% speedup + c := encoding[t] + w.bits |= uint64(c.code) << w.nbits + w.nbits += uint(c.len) + if w.nbits < 48 { + continue + } + // Store 6 bytes + bits := w.bits + w.bits >>= 48 + w.nbits -= 48 + bytes := w.bytes[n : n+6] + bytes[0] = byte(bits) + bytes[1] = byte(bits >> 8) + bytes[2] = byte(bits >> 16) + bytes[3] = byte(bits >> 24) + bytes[4] = byte(bits >> 32) + bytes[5] = byte(bits >> 40) + n += 6 + if n < bufferFlushSize { + continue + } + w.write(w.bytes[:n]) + if w.err != nil { + return // Return early in the event of write failures + } + n = 0 + } + w.nbytes = n + w.writeCode(encoding[endBlockMarker]) +} + +// histogram accumulates a histogram of b in h. +// +// len(h) must be >= 256, and h's elements must be all zeroes. +func histogram(b []byte, h []int32) { + h = h[:256] + for _, t := range b { + h[t]++ + } +} diff --git a/src/compress/flate/huffman_bit_writer_test.go b/src/compress/flate/huffman_bit_writer_test.go new file mode 100644 index 0000000..a57799c --- /dev/null +++ b/src/compress/flate/huffman_bit_writer_test.go @@ -0,0 +1,365 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "flag" + "fmt" + "os" + "path/filepath" + "strings" + "testing" +) + +var update = flag.Bool("update", false, "update reference files") + +// TestBlockHuff tests huffman encoding against reference files +// to detect possible regressions. +// If encoding/bit allocation changes you can regenerate these files +// by using the -update flag. +func TestBlockHuff(t *testing.T) { + // determine input files + match, err := filepath.Glob("testdata/huffman-*.in") + if err != nil { + t.Fatal(err) + } + + for _, in := range match { + out := in // for files where input and output are identical + if strings.HasSuffix(in, ".in") { + out = in[:len(in)-len(".in")] + ".golden" + } + testBlockHuff(t, in, out) + } +} + +func testBlockHuff(t *testing.T, in, out string) { + all, err := os.ReadFile(in) + if err != nil { + t.Error(err) + return + } + var buf bytes.Buffer + bw := newHuffmanBitWriter(&buf) + bw.writeBlockHuff(false, all) + bw.flush() + got := buf.Bytes() + + want, err := os.ReadFile(out) + if err != nil && !*update { + t.Error(err) + return + } + + t.Logf("Testing %q", in) + if !bytes.Equal(got, want) { + if *update { + if in != out { + t.Logf("Updating %q", out) + if err := os.WriteFile(out, got, 0666); err != nil { + t.Error(err) + } + return + } + // in == out: don't accidentally destroy input + t.Errorf("WARNING: -update did not rewrite input file %s", in) + } + + t.Errorf("%q != %q (see %q)", in, out, in+".got") + if err := os.WriteFile(in+".got", got, 0666); err != nil { + t.Error(err) + } + return + } + t.Log("Output ok") + + // Test if the writer produces the same output after reset. + buf.Reset() + bw.reset(&buf) + bw.writeBlockHuff(false, all) + bw.flush() + got = buf.Bytes() + if !bytes.Equal(got, want) { + t.Errorf("after reset %q != %q (see %q)", in, out, in+".reset.got") + if err := os.WriteFile(in+".reset.got", got, 0666); err != nil { + t.Error(err) + } + return + } + t.Log("Reset ok") + testWriterEOF(t, "huff", huffTest{input: in}, true) +} + +type huffTest struct { + tokens []token + input string // File name of input data matching the tokens. + want string // File name of data with the expected output with input available. + wantNoInput string // File name of the expected output when no input is available. +} + +const ml = 0x7fc00000 // Maximum length token. Used to reduce the size of writeBlockTests + +var writeBlockTests = []huffTest{ + { + input: "testdata/huffman-null-max.in", + want: "testdata/huffman-null-max.%s.expect", + wantNoInput: "testdata/huffman-null-max.%s.expect-noinput", + tokens: []token{0x0, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, 0x0, 0x0}, + }, + { + input: "testdata/huffman-pi.in", + want: "testdata/huffman-pi.%s.expect", + wantNoInput: "testdata/huffman-pi.%s.expect-noinput", + tokens: []token{0x33, 0x2e, 0x31, 0x34, 0x31, 0x35, 0x39, 0x32, 0x36, 0x35, 0x33, 0x35, 0x38, 0x39, 0x37, 0x39, 0x33, 0x32, 0x33, 0x38, 0x34, 0x36, 0x32, 0x36, 0x34, 0x33, 0x33, 0x38, 0x33, 0x32, 0x37, 0x39, 0x35, 0x30, 0x32, 0x38, 0x38, 0x34, 0x31, 0x39, 0x37, 0x31, 0x36, 0x39, 0x33, 0x39, 0x39, 0x33, 0x37, 0x35, 0x31, 0x30, 0x35, 0x38, 0x32, 0x30, 0x39, 0x37, 0x34, 0x39, 0x34, 0x34, 0x35, 0x39, 0x32, 0x33, 0x30, 0x37, 0x38, 0x31, 0x36, 0x34, 0x30, 0x36, 0x32, 0x38, 0x36, 0x32, 0x30, 0x38, 0x39, 0x39, 0x38, 0x36, 0x32, 0x38, 0x30, 0x33, 0x34, 0x38, 0x32, 0x35, 0x33, 0x34, 0x32, 0x31, 0x31, 0x37, 0x30, 0x36, 0x37, 0x39, 0x38, 0x32, 0x31, 0x34, 0x38, 0x30, 0x38, 0x36, 0x35, 0x31, 0x33, 0x32, 0x38, 0x32, 0x33, 0x30, 0x36, 0x36, 0x34, 0x37, 0x30, 0x39, 0x33, 0x38, 0x34, 0x34, 0x36, 0x30, 0x39, 0x35, 0x35, 0x30, 0x35, 0x38, 0x32, 0x32, 0x33, 0x31, 0x37, 0x32, 0x35, 0x33, 0x35, 0x39, 0x34, 0x30, 0x38, 0x31, 0x32, 0x38, 0x34, 0x38, 0x31, 0x31, 0x31, 0x37, 0x34, 0x4040007e, 0x34, 0x31, 0x30, 0x32, 0x37, 0x30, 0x31, 0x39, 0x33, 0x38, 0x35, 0x32, 0x31, 0x31, 0x30, 0x35, 0x35, 0x35, 0x39, 0x36, 0x34, 0x34, 0x36, 0x32, 0x32, 0x39, 0x34, 0x38, 0x39, 0x35, 0x34, 0x39, 0x33, 0x30, 0x33, 0x38, 0x31, 0x40400012, 0x32, 0x38, 0x38, 0x31, 0x30, 0x39, 0x37, 0x35, 0x36, 0x36, 0x35, 0x39, 0x33, 0x33, 0x34, 0x34, 0x36, 0x40400047, 0x37, 0x35, 0x36, 0x34, 0x38, 0x32, 0x33, 0x33, 0x37, 0x38, 0x36, 0x37, 0x38, 0x33, 0x31, 0x36, 0x35, 0x32, 0x37, 0x31, 0x32, 0x30, 0x31, 0x39, 0x30, 0x39, 0x31, 0x34, 0x4040001a, 0x35, 0x36, 0x36, 0x39, 0x32, 0x33, 0x34, 0x36, 0x404000b2, 0x36, 0x31, 0x30, 0x34, 0x35, 0x34, 0x33, 0x32, 0x36, 0x40400032, 0x31, 0x33, 0x33, 0x39, 0x33, 0x36, 0x30, 0x37, 0x32, 0x36, 0x30, 0x32, 0x34, 0x39, 0x31, 0x34, 0x31, 0x32, 0x37, 0x33, 0x37, 0x32, 0x34, 0x35, 0x38, 0x37, 0x30, 0x30, 0x36, 0x36, 0x30, 0x36, 0x33, 0x31, 0x35, 0x35, 0x38, 0x38, 0x31, 0x37, 0x34, 0x38, 0x38, 0x31, 0x35, 0x32, 0x30, 0x39, 0x32, 0x30, 0x39, 0x36, 0x32, 0x38, 0x32, 0x39, 0x32, 0x35, 0x34, 0x30, 0x39, 0x31, 0x37, 0x31, 0x35, 0x33, 0x36, 0x34, 0x33, 0x36, 0x37, 0x38, 0x39, 0x32, 0x35, 0x39, 0x30, 0x33, 0x36, 0x30, 0x30, 0x31, 0x31, 0x33, 0x33, 0x30, 0x35, 0x33, 0x30, 0x35, 0x34, 0x38, 0x38, 0x32, 0x30, 0x34, 0x36, 0x36, 0x35, 0x32, 0x31, 0x33, 0x38, 0x34, 0x31, 0x34, 0x36, 0x39, 0x35, 0x31, 0x39, 0x34, 0x31, 0x35, 0x31, 0x31, 0x36, 0x30, 0x39, 0x34, 0x33, 0x33, 0x30, 0x35, 0x37, 0x32, 0x37, 0x30, 0x33, 0x36, 0x35, 0x37, 0x35, 0x39, 0x35, 0x39, 0x31, 0x39, 0x35, 0x33, 0x30, 0x39, 0x32, 0x31, 0x38, 0x36, 0x31, 0x31, 0x37, 0x404000e9, 0x33, 0x32, 0x40400009, 0x39, 0x33, 0x31, 0x30, 0x35, 0x31, 0x31, 0x38, 0x35, 0x34, 0x38, 0x30, 0x37, 0x4040010e, 0x33, 0x37, 0x39, 0x39, 0x36, 0x32, 0x37, 0x34, 0x39, 0x35, 0x36, 0x37, 0x33, 0x35, 0x31, 0x38, 0x38, 0x35, 0x37, 0x35, 0x32, 0x37, 0x32, 0x34, 0x38, 0x39, 0x31, 0x32, 0x32, 0x37, 0x39, 0x33, 0x38, 0x31, 0x38, 0x33, 0x30, 0x31, 0x31, 0x39, 0x34, 0x39, 0x31, 0x32, 0x39, 0x38, 0x33, 0x33, 0x36, 0x37, 0x33, 0x33, 0x36, 0x32, 0x34, 0x34, 0x30, 0x36, 0x35, 0x36, 0x36, 0x34, 0x33, 0x30, 0x38, 0x36, 0x30, 0x32, 0x31, 0x33, 0x39, 0x34, 0x39, 0x34, 0x36, 0x33, 0x39, 0x35, 0x32, 0x32, 0x34, 0x37, 0x33, 0x37, 0x31, 0x39, 0x30, 0x37, 0x30, 0x32, 0x31, 0x37, 0x39, 0x38, 0x40800099, 0x37, 0x30, 0x32, 0x37, 0x37, 0x30, 0x35, 0x33, 0x39, 0x32, 0x31, 0x37, 0x31, 0x37, 0x36, 0x32, 0x39, 0x33, 0x31, 0x37, 0x36, 0x37, 0x35, 0x40800232, 0x37, 0x34, 0x38, 0x31, 0x40400006, 0x36, 0x36, 0x39, 0x34, 0x30, 0x404001e7, 0x30, 0x30, 0x30, 0x35, 0x36, 0x38, 0x31, 0x32, 0x37, 0x31, 0x34, 0x35, 0x32, 0x36, 0x33, 0x35, 0x36, 0x30, 0x38, 0x32, 0x37, 0x37, 0x38, 0x35, 0x37, 0x37, 0x31, 0x33, 0x34, 0x32, 0x37, 0x35, 0x37, 0x37, 0x38, 0x39, 0x36, 0x40400129, 0x33, 0x36, 0x33, 0x37, 0x31, 0x37, 0x38, 0x37, 0x32, 0x31, 0x34, 0x36, 0x38, 0x34, 0x34, 0x30, 0x39, 0x30, 0x31, 0x32, 0x32, 0x34, 0x39, 0x35, 0x33, 0x34, 0x33, 0x30, 0x31, 0x34, 0x36, 0x35, 0x34, 0x39, 0x35, 0x38, 0x35, 0x33, 0x37, 0x31, 0x30, 0x35, 0x30, 0x37, 0x39, 0x404000ca, 0x36, 0x40400153, 0x38, 0x39, 0x32, 0x33, 0x35, 0x34, 0x404001c9, 0x39, 0x35, 0x36, 0x31, 0x31, 0x32, 0x31, 0x32, 0x39, 0x30, 0x32, 0x31, 0x39, 0x36, 0x30, 0x38, 0x36, 0x34, 0x30, 0x33, 0x34, 0x34, 0x31, 0x38, 0x31, 0x35, 0x39, 0x38, 0x31, 0x33, 0x36, 0x32, 0x39, 0x37, 0x37, 0x34, 0x40400074, 0x30, 0x39, 0x39, 0x36, 0x30, 0x35, 0x31, 0x38, 0x37, 0x30, 0x37, 0x32, 0x31, 0x31, 0x33, 0x34, 0x39, 0x40800000, 0x38, 0x33, 0x37, 0x32, 0x39, 0x37, 0x38, 0x30, 0x34, 0x39, 0x39, 0x404002da, 0x39, 0x37, 0x33, 0x31, 0x37, 0x33, 0x32, 0x38, 0x4040018a, 0x36, 0x33, 0x31, 0x38, 0x35, 0x40400301, 0x404002e8, 0x34, 0x35, 0x35, 0x33, 0x34, 0x36, 0x39, 0x30, 0x38, 0x33, 0x30, 0x32, 0x36, 0x34, 0x32, 0x35, 0x32, 0x32, 0x33, 0x30, 0x404002e3, 0x40400267, 0x38, 0x35, 0x30, 0x33, 0x35, 0x32, 0x36, 0x31, 0x39, 0x33, 0x31, 0x31, 0x40400212, 0x31, 0x30, 0x31, 0x30, 0x30, 0x30, 0x33, 0x31, 0x33, 0x37, 0x38, 0x33, 0x38, 0x37, 0x35, 0x32, 0x38, 0x38, 0x36, 0x35, 0x38, 0x37, 0x35, 0x33, 0x33, 0x32, 0x30, 0x38, 0x33, 0x38, 0x31, 0x34, 0x32, 0x30, 0x36, 0x40400140, 0x4040012b, 0x31, 0x34, 0x37, 0x33, 0x30, 0x33, 0x35, 0x39, 0x4080032e, 0x39, 0x30, 0x34, 0x32, 0x38, 0x37, 0x35, 0x35, 0x34, 0x36, 0x38, 0x37, 0x33, 0x31, 0x31, 0x35, 0x39, 0x35, 0x40400355, 0x33, 0x38, 0x38, 0x32, 0x33, 0x35, 0x33, 0x37, 0x38, 0x37, 0x35, 0x4080037f, 0x39, 0x4040013a, 0x31, 0x40400148, 0x38, 0x30, 0x35, 0x33, 0x4040018a, 0x32, 0x32, 0x36, 0x38, 0x30, 0x36, 0x36, 0x31, 0x33, 0x30, 0x30, 0x31, 0x39, 0x32, 0x37, 0x38, 0x37, 0x36, 0x36, 0x31, 0x31, 0x31, 0x39, 0x35, 0x39, 0x40400237, 0x36, 0x40800124, 0x38, 0x39, 0x33, 0x38, 0x30, 0x39, 0x35, 0x32, 0x35, 0x37, 0x32, 0x30, 0x31, 0x30, 0x36, 0x35, 0x34, 0x38, 0x35, 0x38, 0x36, 0x33, 0x32, 0x37, 0x4040009a, 0x39, 0x33, 0x36, 0x31, 0x35, 0x33, 0x40400220, 0x4080015c, 0x32, 0x33, 0x30, 0x33, 0x30, 0x31, 0x39, 0x35, 0x32, 0x30, 0x33, 0x35, 0x33, 0x30, 0x31, 0x38, 0x35, 0x32, 0x40400171, 0x40400075, 0x33, 0x36, 0x32, 0x32, 0x35, 0x39, 0x39, 0x34, 0x31, 0x33, 0x40400254, 0x34, 0x39, 0x37, 0x32, 0x31, 0x37, 0x404000de, 0x33, 0x34, 0x37, 0x39, 0x31, 0x33, 0x31, 0x35, 0x31, 0x35, 0x35, 0x37, 0x34, 0x38, 0x35, 0x37, 0x32, 0x34, 0x32, 0x34, 0x35, 0x34, 0x31, 0x35, 0x30, 0x36, 0x39, 0x4040013f, 0x38, 0x32, 0x39, 0x35, 0x33, 0x33, 0x31, 0x31, 0x36, 0x38, 0x36, 0x31, 0x37, 0x32, 0x37, 0x38, 0x40400337, 0x39, 0x30, 0x37, 0x35, 0x30, 0x39, 0x4040010d, 0x37, 0x35, 0x34, 0x36, 0x33, 0x37, 0x34, 0x36, 0x34, 0x39, 0x33, 0x39, 0x33, 0x31, 0x39, 0x32, 0x35, 0x35, 0x30, 0x36, 0x30, 0x34, 0x30, 0x30, 0x39, 0x4040026b, 0x31, 0x36, 0x37, 0x31, 0x31, 0x33, 0x39, 0x30, 0x30, 0x39, 0x38, 0x40400335, 0x34, 0x30, 0x31, 0x32, 0x38, 0x35, 0x38, 0x33, 0x36, 0x31, 0x36, 0x30, 0x33, 0x35, 0x36, 0x33, 0x37, 0x30, 0x37, 0x36, 0x36, 0x30, 0x31, 0x30, 0x34, 0x40400172, 0x38, 0x31, 0x39, 0x34, 0x32, 0x39, 0x4080041e, 0x404000ef, 0x4040028b, 0x37, 0x38, 0x33, 0x37, 0x34, 0x404004a8, 0x38, 0x32, 0x35, 0x35, 0x33, 0x37, 0x40800209, 0x32, 0x36, 0x38, 0x4040002e, 0x34, 0x30, 0x34, 0x37, 0x404001d1, 0x34, 0x404004b5, 0x4040038d, 0x38, 0x34, 0x404003a8, 0x36, 0x40c0031f, 0x33, 0x33, 0x31, 0x33, 0x36, 0x37, 0x37, 0x30, 0x32, 0x38, 0x39, 0x38, 0x39, 0x31, 0x35, 0x32, 0x40400062, 0x35, 0x32, 0x31, 0x36, 0x32, 0x30, 0x35, 0x36, 0x39, 0x36, 0x40400411, 0x30, 0x35, 0x38, 0x40400477, 0x35, 0x40400498, 0x35, 0x31, 0x31, 0x40400209, 0x38, 0x32, 0x34, 0x33, 0x30, 0x30, 0x33, 0x35, 0x35, 0x38, 0x37, 0x36, 0x34, 0x30, 0x32, 0x34, 0x37, 0x34, 0x39, 0x36, 0x34, 0x37, 0x33, 0x32, 0x36, 0x33, 0x4040043e, 0x39, 0x39, 0x32, 0x4040044b, 0x34, 0x32, 0x36, 0x39, 0x40c002c5, 0x37, 0x404001d6, 0x34, 0x4040053d, 0x4040041d, 0x39, 0x33, 0x34, 0x31, 0x37, 0x404001ad, 0x31, 0x32, 0x4040002a, 0x34, 0x4040019e, 0x31, 0x35, 0x30, 0x33, 0x30, 0x32, 0x38, 0x36, 0x31, 0x38, 0x32, 0x39, 0x37, 0x34, 0x35, 0x35, 0x35, 0x37, 0x30, 0x36, 0x37, 0x34, 0x40400135, 0x35, 0x30, 0x35, 0x34, 0x39, 0x34, 0x35, 0x38, 0x404001c5, 0x39, 0x40400051, 0x35, 0x36, 0x404001ec, 0x37, 0x32, 0x31, 0x30, 0x37, 0x39, 0x40400159, 0x33, 0x30, 0x4040010a, 0x33, 0x32, 0x31, 0x31, 0x36, 0x35, 0x33, 0x34, 0x34, 0x39, 0x38, 0x37, 0x32, 0x30, 0x32, 0x37, 0x4040011b, 0x30, 0x32, 0x33, 0x36, 0x34, 0x4040022e, 0x35, 0x34, 0x39, 0x39, 0x31, 0x31, 0x39, 0x38, 0x40400418, 0x34, 0x4040011b, 0x35, 0x33, 0x35, 0x36, 0x36, 0x33, 0x36, 0x39, 0x40400450, 0x32, 0x36, 0x35, 0x404002e4, 0x37, 0x38, 0x36, 0x32, 0x35, 0x35, 0x31, 0x404003da, 0x31, 0x37, 0x35, 0x37, 0x34, 0x36, 0x37, 0x32, 0x38, 0x39, 0x30, 0x39, 0x37, 0x37, 0x37, 0x37, 0x40800453, 0x30, 0x30, 0x30, 0x404005fd, 0x37, 0x30, 0x404004df, 0x36, 0x404003e9, 0x34, 0x39, 0x31, 0x4040041e, 0x40400297, 0x32, 0x31, 0x34, 0x37, 0x37, 0x32, 0x33, 0x35, 0x30, 0x31, 0x34, 0x31, 0x34, 0x40400643, 0x33, 0x35, 0x36, 0x404004af, 0x31, 0x36, 0x31, 0x33, 0x36, 0x31, 0x31, 0x35, 0x37, 0x33, 0x35, 0x32, 0x35, 0x40400504, 0x33, 0x34, 0x4040005b, 0x31, 0x38, 0x4040047b, 0x38, 0x34, 0x404005e7, 0x33, 0x33, 0x32, 0x33, 0x39, 0x30, 0x37, 0x33, 0x39, 0x34, 0x31, 0x34, 0x33, 0x33, 0x33, 0x34, 0x35, 0x34, 0x37, 0x37, 0x36, 0x32, 0x34, 0x40400242, 0x32, 0x35, 0x31, 0x38, 0x39, 0x38, 0x33, 0x35, 0x36, 0x39, 0x34, 0x38, 0x35, 0x35, 0x36, 0x32, 0x30, 0x39, 0x39, 0x32, 0x31, 0x39, 0x32, 0x32, 0x32, 0x31, 0x38, 0x34, 0x32, 0x37, 0x4040023e, 0x32, 0x404000ba, 0x36, 0x38, 0x38, 0x37, 0x36, 0x37, 0x31, 0x37, 0x39, 0x30, 0x40400055, 0x30, 0x40800106, 0x36, 0x36, 0x404003e7, 0x38, 0x38, 0x36, 0x32, 0x37, 0x32, 0x404006dc, 0x31, 0x37, 0x38, 0x36, 0x30, 0x38, 0x35, 0x37, 0x40400073, 0x33, 0x408002fc, 0x37, 0x39, 0x37, 0x36, 0x36, 0x38, 0x31, 0x404002bd, 0x30, 0x30, 0x39, 0x35, 0x33, 0x38, 0x38, 0x40400638, 0x33, 0x404006a5, 0x30, 0x36, 0x38, 0x30, 0x30, 0x36, 0x34, 0x32, 0x32, 0x35, 0x31, 0x32, 0x35, 0x32, 0x4040057b, 0x37, 0x33, 0x39, 0x32, 0x40400297, 0x40400474, 0x34, 0x408006b3, 0x38, 0x36, 0x32, 0x36, 0x39, 0x34, 0x35, 0x404001e5, 0x34, 0x31, 0x39, 0x36, 0x35, 0x32, 0x38, 0x35, 0x30, 0x40400099, 0x4040039c, 0x31, 0x38, 0x36, 0x33, 0x404001be, 0x34, 0x40800154, 0x32, 0x30, 0x33, 0x39, 0x4040058b, 0x34, 0x35, 0x404002bc, 0x32, 0x33, 0x37, 0x4040042c, 0x36, 0x40400510, 0x35, 0x36, 0x40400638, 0x37, 0x31, 0x39, 0x31, 0x37, 0x32, 0x38, 0x40400171, 0x37, 0x36, 0x34, 0x36, 0x35, 0x37, 0x35, 0x37, 0x33, 0x39, 0x40400101, 0x33, 0x38, 0x39, 0x40400748, 0x38, 0x33, 0x32, 0x36, 0x34, 0x35, 0x39, 0x39, 0x35, 0x38, 0x404006a7, 0x30, 0x34, 0x37, 0x38, 0x404001de, 0x40400328, 0x39, 0x4040002d, 0x36, 0x34, 0x30, 0x37, 0x38, 0x39, 0x35, 0x31, 0x4040008e, 0x36, 0x38, 0x33, 0x4040012f, 0x32, 0x35, 0x39, 0x35, 0x37, 0x30, 0x40400468, 0x38, 0x32, 0x32, 0x404002c8, 0x32, 0x4040061b, 0x34, 0x30, 0x37, 0x37, 0x32, 0x36, 0x37, 0x31, 0x39, 0x34, 0x37, 0x38, 0x40400319, 0x38, 0x32, 0x36, 0x30, 0x31, 0x34, 0x37, 0x36, 0x39, 0x39, 0x30, 0x39, 0x404004e8, 0x30, 0x31, 0x33, 0x36, 0x33, 0x39, 0x34, 0x34, 0x33, 0x4040027f, 0x33, 0x30, 0x40400105, 0x32, 0x30, 0x33, 0x34, 0x39, 0x36, 0x32, 0x35, 0x32, 0x34, 0x35, 0x31, 0x37, 0x404003b5, 0x39, 0x36, 0x35, 0x31, 0x34, 0x33, 0x31, 0x34, 0x32, 0x39, 0x38, 0x30, 0x39, 0x31, 0x39, 0x30, 0x36, 0x35, 0x39, 0x32, 0x40400282, 0x37, 0x32, 0x32, 0x31, 0x36, 0x39, 0x36, 0x34, 0x36, 0x40400419, 0x4040007a, 0x35, 0x4040050e, 0x34, 0x40800565, 0x38, 0x40400559, 0x39, 0x37, 0x4040057b, 0x35, 0x34, 0x4040049d, 0x4040023e, 0x37, 0x4040065a, 0x38, 0x34, 0x36, 0x38, 0x31, 0x33, 0x4040008c, 0x36, 0x38, 0x33, 0x38, 0x36, 0x38, 0x39, 0x34, 0x32, 0x37, 0x37, 0x34, 0x31, 0x35, 0x35, 0x39, 0x39, 0x31, 0x38, 0x35, 0x4040005a, 0x32, 0x34, 0x35, 0x39, 0x35, 0x33, 0x39, 0x35, 0x39, 0x34, 0x33, 0x31, 0x404005b7, 0x37, 0x40400012, 0x36, 0x38, 0x30, 0x38, 0x34, 0x35, 0x404002e7, 0x37, 0x33, 0x4040081e, 0x39, 0x35, 0x38, 0x34, 0x38, 0x36, 0x35, 0x33, 0x38, 0x404006e8, 0x36, 0x32, 0x404000f2, 0x36, 0x30, 0x39, 0x404004b6, 0x36, 0x30, 0x38, 0x30, 0x35, 0x31, 0x32, 0x34, 0x33, 0x38, 0x38, 0x34, 0x4040013a, 0x4040000b, 0x34, 0x31, 0x33, 0x4040030f, 0x37, 0x36, 0x32, 0x37, 0x38, 0x40400341, 0x37, 0x31, 0x35, 0x4040059b, 0x33, 0x35, 0x39, 0x39, 0x37, 0x37, 0x30, 0x30, 0x31, 0x32, 0x39, 0x40400472, 0x38, 0x39, 0x34, 0x34, 0x31, 0x40400277, 0x36, 0x38, 0x35, 0x35, 0x4040005f, 0x34, 0x30, 0x36, 0x33, 0x404008e6, 0x32, 0x30, 0x37, 0x32, 0x32, 0x40400158, 0x40800203, 0x34, 0x38, 0x31, 0x35, 0x38, 0x40400205, 0x404001fe, 0x4040027a, 0x40400298, 0x33, 0x39, 0x34, 0x35, 0x32, 0x32, 0x36, 0x37, 0x40c00496, 0x38, 0x4040058a, 0x32, 0x31, 0x404002ea, 0x32, 0x40400387, 0x35, 0x34, 0x36, 0x36, 0x36, 0x4040051b, 0x32, 0x33, 0x39, 0x38, 0x36, 0x34, 0x35, 0x36, 0x404004c4, 0x31, 0x36, 0x33, 0x35, 0x40800253, 0x40400811, 0x37, 0x404008ad, 0x39, 0x38, 0x4040045e, 0x39, 0x33, 0x36, 0x33, 0x34, 0x4040075b, 0x37, 0x34, 0x33, 0x32, 0x34, 0x4040047b, 0x31, 0x35, 0x30, 0x37, 0x36, 0x404004bb, 0x37, 0x39, 0x34, 0x35, 0x31, 0x30, 0x39, 0x4040003e, 0x30, 0x39, 0x34, 0x30, 0x404006a6, 0x38, 0x38, 0x37, 0x39, 0x37, 0x31, 0x30, 0x38, 0x39, 0x33, 0x404008f0, 0x36, 0x39, 0x31, 0x33, 0x36, 0x38, 0x36, 0x37, 0x32, 0x4040025b, 0x404001fe, 0x35, 0x4040053f, 0x40400468, 0x40400801, 0x31, 0x37, 0x39, 0x32, 0x38, 0x36, 0x38, 0x404008cc, 0x38, 0x37, 0x34, 0x37, 0x4080079e, 0x38, 0x32, 0x34, 0x4040097a, 0x38, 0x4040025b, 0x37, 0x31, 0x34, 0x39, 0x30, 0x39, 0x36, 0x37, 0x35, 0x39, 0x38, 0x404006ef, 0x33, 0x36, 0x35, 0x40400134, 0x38, 0x31, 0x4040005c, 0x40400745, 0x40400936, 0x36, 0x38, 0x32, 0x39, 0x4040057e, 0x38, 0x37, 0x32, 0x32, 0x36, 0x35, 0x38, 0x38, 0x30, 0x40400611, 0x35, 0x40400249, 0x34, 0x32, 0x37, 0x30, 0x34, 0x37, 0x37, 0x35, 0x35, 0x4040081e, 0x33, 0x37, 0x39, 0x36, 0x34, 0x31, 0x34, 0x35, 0x31, 0x35, 0x32, 0x404005fd, 0x32, 0x33, 0x34, 0x33, 0x36, 0x34, 0x35, 0x34, 0x404005de, 0x34, 0x34, 0x34, 0x37, 0x39, 0x35, 0x4040003c, 0x40400523, 0x408008e6, 0x34, 0x31, 0x4040052a, 0x33, 0x40400304, 0x35, 0x32, 0x33, 0x31, 0x40800841, 0x31, 0x36, 0x36, 0x31, 0x404008b2, 0x35, 0x39, 0x36, 0x39, 0x35, 0x33, 0x36, 0x32, 0x33, 0x31, 0x34, 0x404005ff, 0x32, 0x34, 0x38, 0x34, 0x39, 0x33, 0x37, 0x31, 0x38, 0x37, 0x31, 0x31, 0x30, 0x31, 0x34, 0x35, 0x37, 0x36, 0x35, 0x34, 0x40400761, 0x30, 0x32, 0x37, 0x39, 0x39, 0x33, 0x34, 0x34, 0x30, 0x33, 0x37, 0x34, 0x32, 0x30, 0x30, 0x37, 0x4040093f, 0x37, 0x38, 0x35, 0x33, 0x39, 0x30, 0x36, 0x32, 0x31, 0x39, 0x40800299, 0x40400345, 0x38, 0x34, 0x37, 0x408003d2, 0x38, 0x33, 0x33, 0x32, 0x31, 0x34, 0x34, 0x35, 0x37, 0x31, 0x40400284, 0x40400776, 0x34, 0x33, 0x35, 0x30, 0x40400928, 0x40400468, 0x35, 0x33, 0x31, 0x39, 0x31, 0x30, 0x34, 0x38, 0x34, 0x38, 0x31, 0x30, 0x30, 0x35, 0x33, 0x37, 0x30, 0x36, 0x404008bc, 0x4080059d, 0x40800781, 0x31, 0x40400559, 0x37, 0x4040031b, 0x35, 0x404007ec, 0x4040040c, 0x36, 0x33, 0x408007dc, 0x34, 0x40400971, 0x4080034e, 0x408003f5, 0x38, 0x4080052d, 0x40800887, 0x39, 0x40400187, 0x39, 0x31, 0x404008ce, 0x38, 0x31, 0x34, 0x36, 0x37, 0x35, 0x31, 0x4040062b, 0x31, 0x32, 0x33, 0x39, 0x40c001a9, 0x39, 0x30, 0x37, 0x31, 0x38, 0x36, 0x34, 0x39, 0x34, 0x32, 0x33, 0x31, 0x39, 0x36, 0x31, 0x35, 0x36, 0x404001ec, 0x404006bc, 0x39, 0x35, 0x40400926, 0x40400469, 0x4040011b, 0x36, 0x30, 0x33, 0x38, 0x40400a25, 0x4040016f, 0x40400384, 0x36, 0x32, 0x4040045a, 0x35, 0x4040084c, 0x36, 0x33, 0x38, 0x39, 0x33, 0x37, 0x37, 0x38, 0x37, 0x404008c5, 0x404000f8, 0x39, 0x37, 0x39, 0x32, 0x30, 0x37, 0x37, 0x33, 0x404005d7, 0x32, 0x31, 0x38, 0x32, 0x35, 0x36, 0x404007df, 0x36, 0x36, 0x404006d6, 0x34, 0x32, 0x4080067e, 0x36, 0x404006e6, 0x34, 0x34, 0x40400024, 0x35, 0x34, 0x39, 0x32, 0x30, 0x32, 0x36, 0x30, 0x35, 0x40400ab3, 0x408003e4, 0x32, 0x30, 0x31, 0x34, 0x39, 0x404004d2, 0x38, 0x35, 0x30, 0x37, 0x33, 0x40400599, 0x36, 0x36, 0x36, 0x30, 0x40400194, 0x32, 0x34, 0x33, 0x34, 0x30, 0x40400087, 0x30, 0x4040076b, 0x38, 0x36, 0x33, 0x40400956, 0x404007e4, 0x4040042b, 0x40400174, 0x35, 0x37, 0x39, 0x36, 0x32, 0x36, 0x38, 0x35, 0x36, 0x40400140, 0x35, 0x30, 0x38, 0x40400523, 0x35, 0x38, 0x37, 0x39, 0x36, 0x39, 0x39, 0x40400711, 0x35, 0x37, 0x34, 0x40400a18, 0x38, 0x34, 0x30, 0x404008b3, 0x31, 0x34, 0x35, 0x39, 0x31, 0x4040078c, 0x37, 0x30, 0x40400234, 0x30, 0x31, 0x40400be7, 0x31, 0x32, 0x40400c74, 0x30, 0x404003c3, 0x33, 0x39, 0x40400b2a, 0x40400112, 0x37, 0x31, 0x35, 0x404003b0, 0x34, 0x32, 0x30, 0x40800bf2, 0x39, 0x40400bc2, 0x30, 0x37, 0x40400341, 0x40400795, 0x40400aaf, 0x40400c62, 0x32, 0x31, 0x40400960, 0x32, 0x35, 0x31, 0x4040057b, 0x40400944, 0x39, 0x32, 0x404001b2, 0x38, 0x32, 0x36, 0x40400b66, 0x32, 0x40400278, 0x33, 0x32, 0x31, 0x35, 0x37, 0x39, 0x31, 0x39, 0x38, 0x34, 0x31, 0x34, 0x4080087b, 0x39, 0x31, 0x36, 0x34, 0x408006e8, 0x39, 0x40800b58, 0x404008db, 0x37, 0x32, 0x32, 0x40400321, 0x35, 0x404008a4, 0x40400141, 0x39, 0x31, 0x30, 0x404000bc, 0x40400c5b, 0x35, 0x32, 0x38, 0x30, 0x31, 0x37, 0x40400231, 0x37, 0x31, 0x32, 0x40400914, 0x38, 0x33, 0x32, 0x40400373, 0x31, 0x40400589, 0x30, 0x39, 0x33, 0x35, 0x33, 0x39, 0x36, 0x35, 0x37, 0x4040064b, 0x31, 0x30, 0x38, 0x33, 0x40400069, 0x35, 0x31, 0x4040077a, 0x40400d5a, 0x31, 0x34, 0x34, 0x34, 0x32, 0x31, 0x30, 0x30, 0x40400202, 0x30, 0x33, 0x4040019c, 0x31, 0x31, 0x30, 0x33, 0x40400c81, 0x40400009, 0x40400026, 0x40c00602, 0x35, 0x31, 0x36, 0x404005d9, 0x40800883, 0x4040092a, 0x35, 0x40800c42, 0x38, 0x35, 0x31, 0x37, 0x31, 0x34, 0x33, 0x37, 0x40400605, 0x4040006d, 0x31, 0x35, 0x35, 0x36, 0x35, 0x30, 0x38, 0x38, 0x404003b9, 0x39, 0x38, 0x39, 0x38, 0x35, 0x39, 0x39, 0x38, 0x32, 0x33, 0x38, 0x404001cf, 0x404009ba, 0x33, 0x4040016c, 0x4040043e, 0x404009c3, 0x38, 0x40800e05, 0x33, 0x32, 0x40400107, 0x35, 0x40400305, 0x33, 0x404001ca, 0x39, 0x4040041b, 0x39, 0x38, 0x4040087d, 0x34, 0x40400cb8, 0x37, 0x4040064b, 0x30, 0x37, 0x404000e5, 0x34, 0x38, 0x31, 0x34, 0x31, 0x40400539, 0x38, 0x35, 0x39, 0x34, 0x36, 0x31, 0x40400bc9, 0x38, 0x30}, + }, + { + input: "testdata/huffman-rand-1k.in", + want: "testdata/huffman-rand-1k.%s.expect", + wantNoInput: "testdata/huffman-rand-1k.%s.expect-noinput", + tokens: []token{0xf8, 0x8b, 0x96, 0x76, 0x48, 0xd, 0x85, 0x94, 0x25, 0x80, 0xaf, 0xc2, 0xfe, 0x8d, 0xe8, 0x20, 0xeb, 0x17, 0x86, 0xc9, 0xb7, 0xc5, 0xde, 0x6, 0xea, 0x7d, 0x18, 0x8b, 0xe7, 0x3e, 0x7, 0xda, 0xdf, 0xff, 0x6c, 0x73, 0xde, 0xcc, 0xe7, 0x6d, 0x8d, 0x4, 0x19, 0x49, 0x7f, 0x47, 0x1f, 0x48, 0x15, 0xb0, 0xe8, 0x9e, 0xf2, 0x31, 0x59, 0xde, 0x34, 0xb4, 0x5b, 0xe5, 0xe0, 0x9, 0x11, 0x30, 0xc2, 0x88, 0x5b, 0x7c, 0x5d, 0x14, 0x13, 0x6f, 0x23, 0xa9, 0xd, 0xbc, 0x2d, 0x23, 0xbe, 0xd9, 0xed, 0x75, 0x4, 0x6c, 0x99, 0xdf, 0xfd, 0x70, 0x66, 0xe6, 0xee, 0xd9, 0xb1, 0x9e, 0x6e, 0x83, 0x59, 0xd5, 0xd4, 0x80, 0x59, 0x98, 0x77, 0x89, 0x43, 0x38, 0xc9, 0xaf, 0x30, 0x32, 0x9a, 0x20, 0x1b, 0x46, 0x3d, 0x67, 0x6e, 0xd7, 0x72, 0x9e, 0x4e, 0x21, 0x4f, 0xc6, 0xe0, 0xd4, 0x7b, 0x4, 0x8d, 0xa5, 0x3, 0xf6, 0x5, 0x9b, 0x6b, 0xdc, 0x2a, 0x93, 0x77, 0x28, 0xfd, 0xb4, 0x62, 0xda, 0x20, 0xe7, 0x1f, 0xab, 0x6b, 0x51, 0x43, 0x39, 0x2f, 0xa0, 0x92, 0x1, 0x6c, 0x75, 0x3e, 0xf4, 0x35, 0xfd, 0x43, 0x2e, 0xf7, 0xa4, 0x75, 0xda, 0xea, 0x9b, 0xa, 0x64, 0xb, 0xe0, 0x23, 0x29, 0xbd, 0xf7, 0xe7, 0x83, 0x3c, 0xfb, 0xdf, 0xb3, 0xae, 0x4f, 0xa4, 0x47, 0x55, 0x99, 0xde, 0x2f, 0x96, 0x6e, 0x1c, 0x43, 0x4c, 0x87, 0xe2, 0x7c, 0xd9, 0x5f, 0x4c, 0x7c, 0xe8, 0x90, 0x3, 0xdb, 0x30, 0x95, 0xd6, 0x22, 0xc, 0x47, 0xb8, 0x4d, 0x6b, 0xbd, 0x24, 0x11, 0xab, 0x2c, 0xd7, 0xbe, 0x6e, 0x7a, 0xd6, 0x8, 0xa3, 0x98, 0xd8, 0xdd, 0x15, 0x6a, 0xfa, 0x93, 0x30, 0x1, 0x25, 0x1d, 0xa2, 0x74, 0x86, 0x4b, 0x6a, 0x95, 0xe8, 0xe1, 0x4e, 0xe, 0x76, 0xb9, 0x49, 0xa9, 0x5f, 0xa0, 0xa6, 0x63, 0x3c, 0x7e, 0x7e, 0x20, 0x13, 0x4f, 0xbb, 0x66, 0x92, 0xb8, 0x2e, 0xa4, 0xfa, 0x48, 0xcb, 0xae, 0xb9, 0x3c, 0xaf, 0xd3, 0x1f, 0xe1, 0xd5, 0x8d, 0x42, 0x6d, 0xf0, 0xfc, 0x8c, 0xc, 0x0, 0xde, 0x40, 0xab, 0x8b, 0x47, 0x97, 0x4e, 0xa8, 0xcf, 0x8e, 0xdb, 0xa6, 0x8b, 0x20, 0x9, 0x84, 0x7a, 0x66, 0xe5, 0x98, 0x29, 0x2, 0x95, 0xe6, 0x38, 0x32, 0x60, 0x3, 0xe3, 0x9a, 0x1e, 0x54, 0xe8, 0x63, 0x80, 0x48, 0x9c, 0xe7, 0x63, 0x33, 0x6e, 0xa0, 0x65, 0x83, 0xfa, 0xc6, 0xba, 0x7a, 0x43, 0x71, 0x5, 0xf5, 0x68, 0x69, 0x85, 0x9c, 0xba, 0x45, 0xcd, 0x6b, 0xb, 0x19, 0xd1, 0xbb, 0x7f, 0x70, 0x85, 0x92, 0xd1, 0xb4, 0x64, 0x82, 0xb1, 0xe4, 0x62, 0xc5, 0x3c, 0x46, 0x1f, 0x92, 0x31, 0x1c, 0x4e, 0x41, 0x77, 0xf7, 0xe7, 0x87, 0xa2, 0xf, 0x6e, 0xe8, 0x92, 0x3, 0x6b, 0xa, 0xe7, 0xa9, 0x3b, 0x11, 0xda, 0x66, 0x8a, 0x29, 0xda, 0x79, 0xe1, 0x64, 0x8d, 0xe3, 0x54, 0xd4, 0xf5, 0xef, 0x64, 0x87, 0x3b, 0xf4, 0xc2, 0xf4, 0x71, 0x13, 0xa9, 0xe9, 0xe0, 0xa2, 0x6, 0x14, 0xab, 0x5d, 0xa7, 0x96, 0x0, 0xd6, 0xc3, 0xcc, 0x57, 0xed, 0x39, 0x6a, 0x25, 0xcd, 0x76, 0xea, 0xba, 0x3a, 0xf2, 0xa1, 0x95, 0x5d, 0xe5, 0x71, 0xcf, 0x9c, 0x62, 0x9e, 0x6a, 0xfa, 0xd5, 0x31, 0xd1, 0xa8, 0x66, 0x30, 0x33, 0xaa, 0x51, 0x17, 0x13, 0x82, 0x99, 0xc8, 0x14, 0x60, 0x9f, 0x4d, 0x32, 0x6d, 0xda, 0x19, 0x26, 0x21, 0xdc, 0x7e, 0x2e, 0x25, 0x67, 0x72, 0xca, 0xf, 0x92, 0xcd, 0xf6, 0xd6, 0xcb, 0x97, 0x8a, 0x33, 0x58, 0x73, 0x70, 0x91, 0x1d, 0xbf, 0x28, 0x23, 0xa3, 0xc, 0xf1, 0x83, 0xc3, 0xc8, 0x56, 0x77, 0x68, 0xe3, 0x82, 0xba, 0xb9, 0x57, 0x56, 0x57, 0x9c, 0xc3, 0xd6, 0x14, 0x5, 0x3c, 0xb1, 0xaf, 0x93, 0xc8, 0x8a, 0x57, 0x7f, 0x53, 0xfa, 0x2f, 0xaa, 0x6e, 0x66, 0x83, 0xfa, 0x33, 0xd1, 0x21, 0xab, 0x1b, 0x71, 0xb4, 0x7c, 0xda, 0xfd, 0xfb, 0x7f, 0x20, 0xab, 0x5e, 0xd5, 0xca, 0xfd, 0xdd, 0xe0, 0xee, 0xda, 0xba, 0xa8, 0x27, 0x99, 0x97, 0x69, 0xc1, 0x3c, 0x82, 0x8c, 0xa, 0x5c, 0x2d, 0x5b, 0x88, 0x3e, 0x34, 0x35, 0x86, 0x37, 0x46, 0x79, 0xe1, 0xaa, 0x19, 0xfb, 0xaa, 0xde, 0x15, 0x9, 0xd, 0x1a, 0x57, 0xff, 0xb5, 0xf, 0xf3, 0x2b, 0x5a, 0x6a, 0x4d, 0x19, 0x77, 0x71, 0x45, 0xdf, 0x4f, 0xb3, 0xec, 0xf1, 0xeb, 0x18, 0x53, 0x3e, 0x3b, 0x47, 0x8, 0x9a, 0x73, 0xa0, 0x5c, 0x8c, 0x5f, 0xeb, 0xf, 0x3a, 0xc2, 0x43, 0x67, 0xb4, 0x66, 0x67, 0x80, 0x58, 0xe, 0xc1, 0xec, 0x40, 0xd4, 0x22, 0x94, 0xca, 0xf9, 0xe8, 0x92, 0xe4, 0x69, 0x38, 0xbe, 0x67, 0x64, 0xca, 0x50, 0xc7, 0x6, 0x67, 0x42, 0x6e, 0xa3, 0xf0, 0xb7, 0x6c, 0xf2, 0xe8, 0x5f, 0xb1, 0xaf, 0xe7, 0xdb, 0xbb, 0x77, 0xb5, 0xf8, 0xcb, 0x8, 0xc4, 0x75, 0x7e, 0xc0, 0xf9, 0x1c, 0x7f, 0x3c, 0x89, 0x2f, 0xd2, 0x58, 0x3a, 0xe2, 0xf8, 0x91, 0xb6, 0x7b, 0x24, 0x27, 0xe9, 0xae, 0x84, 0x8b, 0xde, 0x74, 0xac, 0xfd, 0xd9, 0xb7, 0x69, 0x2a, 0xec, 0x32, 0x6f, 0xf0, 0x92, 0x84, 0xf1, 0x40, 0xc, 0x8a, 0xbc, 0x39, 0x6e, 0x2e, 0x73, 0xd4, 0x6e, 0x8a, 0x74, 0x2a, 0xdc, 0x60, 0x1f, 0xa3, 0x7, 0xde, 0x75, 0x8b, 0x74, 0xc8, 0xfe, 0x63, 0x75, 0xf6, 0x3d, 0x63, 0xac, 0x33, 0x89, 0xc3, 0xf0, 0xf8, 0x2d, 0x6b, 0xb4, 0x9e, 0x74, 0x8b, 0x5c, 0x33, 0xb4, 0xca, 0xa8, 0xe4, 0x99, 0xb6, 0x90, 0xa1, 0xef, 0xf, 0xd3, 0x61, 0xb2, 0xc6, 0x1a, 0x94, 0x7c, 0x44, 0x55, 0xf4, 0x45, 0xff, 0x9e, 0xa5, 0x5a, 0xc6, 0xa0, 0xe8, 0x2a, 0xc1, 0x8d, 0x6f, 0x34, 0x11, 0xb9, 0xbe, 0x4e, 0xd9, 0x87, 0x97, 0x73, 0xcf, 0x3d, 0x23, 0xae, 0xd5, 0x1a, 0x5e, 0xae, 0x5d, 0x6a, 0x3, 0xf9, 0x22, 0xd, 0x10, 0xd9, 0x47, 0x69, 0x15, 0x3f, 0xee, 0x52, 0xa3, 0x8, 0xd2, 0x3c, 0x51, 0xf4, 0xf8, 0x9d, 0xe4, 0x98, 0x89, 0xc8, 0x67, 0x39, 0xd5, 0x5e, 0x35, 0x78, 0x27, 0xe8, 0x3c, 0x80, 0xae, 0x79, 0x71, 0xd2, 0x93, 0xf4, 0xaa, 0x51, 0x12, 0x1c, 0x4b, 0x1b, 0xe5, 0x6e, 0x15, 0x6f, 0xe4, 0xbb, 0x51, 0x9b, 0x45, 0x9f, 0xf9, 0xc4, 0x8c, 0x2a, 0xfb, 0x1a, 0xdf, 0x55, 0xd3, 0x48, 0x93, 0x27, 0x1, 0x26, 0xc2, 0x6b, 0x55, 0x6d, 0xa2, 0xfb, 0x84, 0x8b, 0xc9, 0x9e, 0x28, 0xc2, 0xef, 0x1a, 0x24, 0xec, 0x9b, 0xae, 0xbd, 0x60, 0xe9, 0x15, 0x35, 0xee, 0x42, 0xa4, 0x33, 0x5b, 0xfa, 0xf, 0xb6, 0xf7, 0x1, 0xa6, 0x2, 0x4c, 0xca, 0x90, 0x58, 0x3a, 0x96, 0x41, 0xe7, 0xcb, 0x9, 0x8c, 0xdb, 0x85, 0x4d, 0xa8, 0x89, 0xf3, 0xb5, 0x8e, 0xfd, 0x75, 0x5b, 0x4f, 0xed, 0xde, 0x3f, 0xeb, 0x38, 0xa3, 0xbe, 0xb0, 0x73, 0xfc, 0xb8, 0x54, 0xf7, 0x4c, 0x30, 0x67, 0x2e, 0x38, 0xa2, 0x54, 0x18, 0xba, 0x8, 0xbf, 0xf2, 0x39, 0xd5, 0xfe, 0xa5, 0x41, 0xc6, 0x66, 0x66, 0xba, 0x81, 0xef, 0x67, 0xe4, 0xe6, 0x3c, 0xc, 0xca, 0xa4, 0xa, 0x79, 0xb3, 0x57, 0x8b, 0x8a, 0x75, 0x98, 0x18, 0x42, 0x2f, 0x29, 0xa3, 0x82, 0xef, 0x9f, 0x86, 0x6, 0x23, 0xe1, 0x75, 0xfa, 0x8, 0xb1, 0xde, 0x17, 0x4a}, + }, + { + input: "testdata/huffman-rand-limit.in", + want: "testdata/huffman-rand-limit.%s.expect", + wantNoInput: "testdata/huffman-rand-limit.%s.expect-noinput", + tokens: []token{0x61, 0x51c00000, 0xa, 0xf8, 0x8b, 0x96, 0x76, 0x48, 0xa, 0x85, 0x94, 0x25, 0x80, 0xaf, 0xc2, 0xfe, 0x8d, 0xe8, 0x20, 0xeb, 0x17, 0x86, 0xc9, 0xb7, 0xc5, 0xde, 0x6, 0xea, 0x7d, 0x18, 0x8b, 0xe7, 0x3e, 0x7, 0xda, 0xdf, 0xff, 0x6c, 0x73, 0xde, 0xcc, 0xe7, 0x6d, 0x8d, 0x4, 0x19, 0x49, 0x7f, 0x47, 0x1f, 0x48, 0x15, 0xb0, 0xe8, 0x9e, 0xf2, 0x31, 0x59, 0xde, 0x34, 0xb4, 0x5b, 0xe5, 0xe0, 0x9, 0x11, 0x30, 0xc2, 0x88, 0x5b, 0x7c, 0x5d, 0x14, 0x13, 0x6f, 0x23, 0xa9, 0xa, 0xbc, 0x2d, 0x23, 0xbe, 0xd9, 0xed, 0x75, 0x4, 0x6c, 0x99, 0xdf, 0xfd, 0x70, 0x66, 0xe6, 0xee, 0xd9, 0xb1, 0x9e, 0x6e, 0x83, 0x59, 0xd5, 0xd4, 0x80, 0x59, 0x98, 0x77, 0x89, 0x43, 0x38, 0xc9, 0xaf, 0x30, 0x32, 0x9a, 0x20, 0x1b, 0x46, 0x3d, 0x67, 0x6e, 0xd7, 0x72, 0x9e, 0x4e, 0x21, 0x4f, 0xc6, 0xe0, 0xd4, 0x7b, 0x4, 0x8d, 0xa5, 0x3, 0xf6, 0x5, 0x9b, 0x6b, 0xdc, 0x2a, 0x93, 0x77, 0x28, 0xfd, 0xb4, 0x62, 0xda, 0x20, 0xe7, 0x1f, 0xab, 0x6b, 0x51, 0x43, 0x39, 0x2f, 0xa0, 0x92, 0x1, 0x6c, 0x75, 0x3e, 0xf4, 0x35, 0xfd, 0x43, 0x2e, 0xf7, 0xa4, 0x75, 0xda, 0xea, 0x9b, 0xa}, + }, + { + input: "testdata/huffman-shifts.in", + want: "testdata/huffman-shifts.%s.expect", + wantNoInput: "testdata/huffman-shifts.%s.expect-noinput", + tokens: []token{0x31, 0x30, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x52400001, 0xd, 0xa, 0x32, 0x33, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7fc00001, 0x7f400001}, + }, + { + input: "testdata/huffman-text-shift.in", + want: "testdata/huffman-text-shift.%s.expect", + wantNoInput: "testdata/huffman-text-shift.%s.expect-noinput", + tokens: []token{0x2f, 0x2f, 0x43, 0x6f, 0x70, 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x32, 0x30, 0x30, 0x39, 0x54, 0x68, 0x47, 0x6f, 0x41, 0x75, 0x74, 0x68, 0x6f, 0x72, 0x2e, 0x41, 0x6c, 0x6c, 0x40800016, 0x72, 0x72, 0x76, 0x64, 0x2e, 0xd, 0xa, 0x2f, 0x2f, 0x55, 0x6f, 0x66, 0x74, 0x68, 0x69, 0x6f, 0x75, 0x72, 0x63, 0x63, 0x6f, 0x64, 0x69, 0x67, 0x6f, 0x76, 0x72, 0x6e, 0x64, 0x62, 0x79, 0x42, 0x53, 0x44, 0x2d, 0x74, 0x79, 0x6c, 0x40400020, 0x6c, 0x69, 0x63, 0x6e, 0x74, 0x68, 0x74, 0x63, 0x6e, 0x62, 0x66, 0x6f, 0x75, 0x6e, 0x64, 0x69, 0x6e, 0x74, 0x68, 0x4c, 0x49, 0x43, 0x45, 0x4e, 0x53, 0x45, 0x66, 0x69, 0x6c, 0x2e, 0xd, 0xa, 0xd, 0xa, 0x70, 0x63, 0x6b, 0x67, 0x6d, 0x69, 0x6e, 0x4040000a, 0x69, 0x6d, 0x70, 0x6f, 0x72, 0x74, 0x22, 0x6f, 0x22, 0x4040000c, 0x66, 0x75, 0x6e, 0x63, 0x6d, 0x69, 0x6e, 0x28, 0x29, 0x7b, 0xd, 0xa, 0x9, 0x76, 0x72, 0x62, 0x3d, 0x6d, 0x6b, 0x28, 0x5b, 0x5d, 0x62, 0x79, 0x74, 0x2c, 0x36, 0x35, 0x35, 0x33, 0x35, 0x29, 0xd, 0xa, 0x9, 0x66, 0x2c, 0x5f, 0x3a, 0x3d, 0x6f, 0x2e, 0x43, 0x72, 0x74, 0x28, 0x22, 0x68, 0x75, 0x66, 0x66, 0x6d, 0x6e, 0x2d, 0x6e, 0x75, 0x6c, 0x6c, 0x2d, 0x6d, 0x78, 0x2e, 0x69, 0x6e, 0x22, 0x40800021, 0x2e, 0x57, 0x72, 0x69, 0x74, 0x28, 0x62, 0x29, 0xd, 0xa, 0x7d, 0xd, 0xa, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x58, 0x78, 0x79, 0x7a, 0x21, 0x22, 0x23, 0xc2, 0xa4, 0x25, 0x26, 0x2f, 0x3f, 0x22}, + }, + { + input: "testdata/huffman-text.in", + want: "testdata/huffman-text.%s.expect", + wantNoInput: "testdata/huffman-text.%s.expect-noinput", + tokens: []token{0x2f, 0x2f, 0x20, 0x43, 0x6f, 0x70, 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x32, 0x30, 0x30, 0x39, 0x20, 0x54, 0x68, 0x65, 0x20, 0x47, 0x6f, 0x20, 0x41, 0x75, 0x74, 0x68, 0x6f, 0x72, 0x73, 0x2e, 0x20, 0x41, 0x6c, 0x6c, 0x20, 0x4080001e, 0x73, 0x20, 0x72, 0x65, 0x73, 0x65, 0x72, 0x76, 0x65, 0x64, 0x2e, 0xd, 0xa, 0x2f, 0x2f, 0x20, 0x55, 0x73, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x73, 0x6f, 0x75, 0x72, 0x63, 0x65, 0x20, 0x63, 0x6f, 0x64, 0x65, 0x20, 0x69, 0x73, 0x20, 0x67, 0x6f, 0x76, 0x65, 0x72, 0x6e, 0x65, 0x64, 0x20, 0x62, 0x79, 0x20, 0x61, 0x20, 0x42, 0x53, 0x44, 0x2d, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x40800036, 0x6c, 0x69, 0x63, 0x65, 0x6e, 0x73, 0x65, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x63, 0x61, 0x6e, 0x20, 0x62, 0x65, 0x20, 0x66, 0x6f, 0x75, 0x6e, 0x64, 0x20, 0x69, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x4c, 0x49, 0x43, 0x45, 0x4e, 0x53, 0x45, 0x20, 0x66, 0x69, 0x6c, 0x65, 0x2e, 0xd, 0xa, 0xd, 0xa, 0x70, 0x61, 0x63, 0x6b, 0x61, 0x67, 0x65, 0x20, 0x6d, 0x61, 0x69, 0x6e, 0x4040000f, 0x69, 0x6d, 0x70, 0x6f, 0x72, 0x74, 0x20, 0x22, 0x6f, 0x73, 0x22, 0x4040000e, 0x66, 0x75, 0x6e, 0x63, 0x4080001b, 0x28, 0x29, 0x20, 0x7b, 0xd, 0xa, 0x9, 0x76, 0x61, 0x72, 0x20, 0x62, 0x20, 0x3d, 0x20, 0x6d, 0x61, 0x6b, 0x65, 0x28, 0x5b, 0x5d, 0x62, 0x79, 0x74, 0x65, 0x2c, 0x20, 0x36, 0x35, 0x35, 0x33, 0x35, 0x29, 0xd, 0xa, 0x9, 0x66, 0x2c, 0x20, 0x5f, 0x20, 0x3a, 0x3d, 0x20, 0x6f, 0x73, 0x2e, 0x43, 0x72, 0x65, 0x61, 0x74, 0x65, 0x28, 0x22, 0x68, 0x75, 0x66, 0x66, 0x6d, 0x61, 0x6e, 0x2d, 0x6e, 0x75, 0x6c, 0x6c, 0x2d, 0x6d, 0x61, 0x78, 0x2e, 0x69, 0x6e, 0x22, 0x4080002a, 0x2e, 0x57, 0x72, 0x69, 0x74, 0x65, 0x28, 0x62, 0x29, 0xd, 0xa, 0x7d, 0xd, 0xa}, + }, + { + input: "testdata/huffman-zero.in", + want: "testdata/huffman-zero.%s.expect", + wantNoInput: "testdata/huffman-zero.%s.expect-noinput", + tokens: []token{0x30, ml, 0x4b800000}, + }, + { + input: "", + want: "", + wantNoInput: "testdata/null-long-match.%s.expect-noinput", + tokens: []token{0x0, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, ml, 0x41400000}, + }, +} + +// TestWriteBlock tests if the writeBlock encoding has changed. +// To update the reference files use the "-update" flag on the test. +func TestWriteBlock(t *testing.T) { + for _, test := range writeBlockTests { + testBlock(t, test, "wb") + } +} + +// TestWriteBlockDynamic tests if the writeBlockDynamic encoding has changed. +// To update the reference files use the "-update" flag on the test. +func TestWriteBlockDynamic(t *testing.T) { + for _, test := range writeBlockTests { + testBlock(t, test, "dyn") + } +} + +// testBlock tests a block against its references, +// or regenerate the references, if "-update" flag is set. +func testBlock(t *testing.T, test huffTest, ttype string) { + if test.want != "" { + test.want = fmt.Sprintf(test.want, ttype) + } + test.wantNoInput = fmt.Sprintf(test.wantNoInput, ttype) + if *update { + if test.input != "" { + t.Logf("Updating %q", test.want) + input, err := os.ReadFile(test.input) + if err != nil { + t.Error(err) + return + } + + f, err := os.Create(test.want) + if err != nil { + t.Error(err) + return + } + defer f.Close() + bw := newHuffmanBitWriter(f) + writeToType(t, ttype, bw, test.tokens, input) + } + + t.Logf("Updating %q", test.wantNoInput) + f, err := os.Create(test.wantNoInput) + if err != nil { + t.Error(err) + return + } + defer f.Close() + bw := newHuffmanBitWriter(f) + writeToType(t, ttype, bw, test.tokens, nil) + return + } + + if test.input != "" { + t.Logf("Testing %q", test.want) + input, err := os.ReadFile(test.input) + if err != nil { + t.Error(err) + return + } + want, err := os.ReadFile(test.want) + if err != nil { + t.Error(err) + return + } + var buf bytes.Buffer + bw := newHuffmanBitWriter(&buf) + writeToType(t, ttype, bw, test.tokens, input) + + got := buf.Bytes() + if !bytes.Equal(got, want) { + t.Errorf("writeBlock did not yield expected result for file %q with input. See %q", test.want, test.want+".got") + if err := os.WriteFile(test.want+".got", got, 0666); err != nil { + t.Error(err) + } + } + t.Log("Output ok") + + // Test if the writer produces the same output after reset. + buf.Reset() + bw.reset(&buf) + writeToType(t, ttype, bw, test.tokens, input) + bw.flush() + got = buf.Bytes() + if !bytes.Equal(got, want) { + t.Errorf("reset: writeBlock did not yield expected result for file %q with input. See %q", test.want, test.want+".reset.got") + if err := os.WriteFile(test.want+".reset.got", got, 0666); err != nil { + t.Error(err) + } + return + } + t.Log("Reset ok") + testWriterEOF(t, "wb", test, true) + } + t.Logf("Testing %q", test.wantNoInput) + wantNI, err := os.ReadFile(test.wantNoInput) + if err != nil { + t.Error(err) + return + } + var buf bytes.Buffer + bw := newHuffmanBitWriter(&buf) + writeToType(t, ttype, bw, test.tokens, nil) + + got := buf.Bytes() + if !bytes.Equal(got, wantNI) { + t.Errorf("writeBlock did not yield expected result for file %q with input. See %q", test.wantNoInput, test.wantNoInput+".got") + if err := os.WriteFile(test.want+".got", got, 0666); err != nil { + t.Error(err) + } + } else if got[0]&1 == 1 { + t.Error("got unexpected EOF") + return + } + + t.Log("Output ok") + + // Test if the writer produces the same output after reset. + buf.Reset() + bw.reset(&buf) + writeToType(t, ttype, bw, test.tokens, nil) + bw.flush() + got = buf.Bytes() + if !bytes.Equal(got, wantNI) { + t.Errorf("reset: writeBlock did not yield expected result for file %q without input. See %q", test.want, test.want+".reset.got") + if err := os.WriteFile(test.want+".reset.got", got, 0666); err != nil { + t.Error(err) + } + return + } + t.Log("Reset ok") + testWriterEOF(t, "wb", test, false) +} + +func writeToType(t *testing.T, ttype string, bw *huffmanBitWriter, tok []token, input []byte) { + switch ttype { + case "wb": + bw.writeBlock(tok, false, input) + case "dyn": + bw.writeBlockDynamic(tok, false, input) + default: + panic("unknown test type") + } + + if bw.err != nil { + t.Error(bw.err) + return + } + + bw.flush() + if bw.err != nil { + t.Error(bw.err) + return + } +} + +// testWriterEOF tests if the written block contains an EOF marker. +func testWriterEOF(t *testing.T, ttype string, test huffTest, useInput bool) { + if useInput && test.input == "" { + return + } + var input []byte + if useInput { + var err error + input, err = os.ReadFile(test.input) + if err != nil { + t.Error(err) + return + } + } + var buf bytes.Buffer + bw := newHuffmanBitWriter(&buf) + switch ttype { + case "wb": + bw.writeBlock(test.tokens, true, input) + case "dyn": + bw.writeBlockDynamic(test.tokens, true, input) + case "huff": + bw.writeBlockHuff(true, input) + default: + panic("unknown test type") + } + if bw.err != nil { + t.Error(bw.err) + return + } + + bw.flush() + if bw.err != nil { + t.Error(bw.err) + return + } + b := buf.Bytes() + if len(b) == 0 { + t.Error("no output received") + return + } + if b[0]&1 != 1 { + t.Errorf("block not marked with EOF for input %q", test.input) + return + } + t.Log("EOF ok") +} diff --git a/src/compress/flate/huffman_code.go b/src/compress/flate/huffman_code.go new file mode 100644 index 0000000..ade4c8f --- /dev/null +++ b/src/compress/flate/huffman_code.go @@ -0,0 +1,345 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "math" + "math/bits" + "sort" +) + +// hcode is a huffman code with a bit code and bit length. +type hcode struct { + code, len uint16 +} + +type huffmanEncoder struct { + codes []hcode + freqcache []literalNode + bitCount [17]int32 + lns byLiteral // stored to avoid repeated allocation in generate + lfs byFreq // stored to avoid repeated allocation in generate +} + +type literalNode struct { + literal uint16 + freq int32 +} + +// A levelInfo describes the state of the constructed tree for a given depth. +type levelInfo struct { + // Our level. for better printing + level int32 + + // The frequency of the last node at this level + lastFreq int32 + + // The frequency of the next character to add to this level + nextCharFreq int32 + + // The frequency of the next pair (from level below) to add to this level. + // Only valid if the "needed" value of the next lower level is 0. + nextPairFreq int32 + + // The number of chains remaining to generate for this level before moving + // up to the next level + needed int32 +} + +// set sets the code and length of an hcode. +func (h *hcode) set(code uint16, length uint16) { + h.len = length + h.code = code +} + +func maxNode() literalNode { return literalNode{math.MaxUint16, math.MaxInt32} } + +func newHuffmanEncoder(size int) *huffmanEncoder { + return &huffmanEncoder{codes: make([]hcode, size)} +} + +// Generates a HuffmanCode corresponding to the fixed literal table. +func generateFixedLiteralEncoding() *huffmanEncoder { + h := newHuffmanEncoder(maxNumLit) + codes := h.codes + var ch uint16 + for ch = 0; ch < maxNumLit; ch++ { + var bits uint16 + var size uint16 + switch { + case ch < 144: + // size 8, 000110000 .. 10111111 + bits = ch + 48 + size = 8 + case ch < 256: + // size 9, 110010000 .. 111111111 + bits = ch + 400 - 144 + size = 9 + case ch < 280: + // size 7, 0000000 .. 0010111 + bits = ch - 256 + size = 7 + default: + // size 8, 11000000 .. 11000111 + bits = ch + 192 - 280 + size = 8 + } + codes[ch] = hcode{code: reverseBits(bits, byte(size)), len: size} + } + return h +} + +func generateFixedOffsetEncoding() *huffmanEncoder { + h := newHuffmanEncoder(30) + codes := h.codes + for ch := range codes { + codes[ch] = hcode{code: reverseBits(uint16(ch), 5), len: 5} + } + return h +} + +var fixedLiteralEncoding *huffmanEncoder = generateFixedLiteralEncoding() +var fixedOffsetEncoding *huffmanEncoder = generateFixedOffsetEncoding() + +func (h *huffmanEncoder) bitLength(freq []int32) int { + var total int + for i, f := range freq { + if f != 0 { + total += int(f) * int(h.codes[i].len) + } + } + return total +} + +const maxBitsLimit = 16 + +// bitCounts computes the number of literals assigned to each bit size in the Huffman encoding. +// It is only called when list.length >= 3. +// The cases of 0, 1, and 2 literals are handled by special case code. +// +// list is an array of the literals with non-zero frequencies +// and their associated frequencies. The array is in order of increasing +// frequency and has as its last element a special element with frequency +// MaxInt32. +// +// maxBits is the maximum number of bits that should be used to encode any literal. +// It must be less than 16. +// +// bitCounts returns an integer slice in which slice[i] indicates the number of literals +// that should be encoded in i bits. +func (h *huffmanEncoder) bitCounts(list []literalNode, maxBits int32) []int32 { + if maxBits >= maxBitsLimit { + panic("flate: maxBits too large") + } + n := int32(len(list)) + list = list[0 : n+1] + list[n] = maxNode() + + // The tree can't have greater depth than n - 1, no matter what. This + // saves a little bit of work in some small cases + if maxBits > n-1 { + maxBits = n - 1 + } + + // Create information about each of the levels. + // A bogus "Level 0" whose sole purpose is so that + // level1.prev.needed==0. This makes level1.nextPairFreq + // be a legitimate value that never gets chosen. + var levels [maxBitsLimit]levelInfo + // leafCounts[i] counts the number of literals at the left + // of ancestors of the rightmost node at level i. + // leafCounts[i][j] is the number of literals at the left + // of the level j ancestor. + var leafCounts [maxBitsLimit][maxBitsLimit]int32 + + for level := int32(1); level <= maxBits; level++ { + // For every level, the first two items are the first two characters. + // We initialize the levels as if we had already figured this out. + levels[level] = levelInfo{ + level: level, + lastFreq: list[1].freq, + nextCharFreq: list[2].freq, + nextPairFreq: list[0].freq + list[1].freq, + } + leafCounts[level][level] = 2 + if level == 1 { + levels[level].nextPairFreq = math.MaxInt32 + } + } + + // We need a total of 2*n - 2 items at top level and have already generated 2. + levels[maxBits].needed = 2*n - 4 + + level := maxBits + for { + l := &levels[level] + if l.nextPairFreq == math.MaxInt32 && l.nextCharFreq == math.MaxInt32 { + // We've run out of both leafs and pairs. + // End all calculations for this level. + // To make sure we never come back to this level or any lower level, + // set nextPairFreq impossibly large. + l.needed = 0 + levels[level+1].nextPairFreq = math.MaxInt32 + level++ + continue + } + + prevFreq := l.lastFreq + if l.nextCharFreq < l.nextPairFreq { + // The next item on this row is a leaf node. + n := leafCounts[level][level] + 1 + l.lastFreq = l.nextCharFreq + // Lower leafCounts are the same of the previous node. + leafCounts[level][level] = n + l.nextCharFreq = list[n].freq + } else { + // The next item on this row is a pair from the previous row. + // nextPairFreq isn't valid until we generate two + // more values in the level below + l.lastFreq = l.nextPairFreq + // Take leaf counts from the lower level, except counts[level] remains the same. + copy(leafCounts[level][:level], leafCounts[level-1][:level]) + levels[l.level-1].needed = 2 + } + + if l.needed--; l.needed == 0 { + // We've done everything we need to do for this level. + // Continue calculating one level up. Fill in nextPairFreq + // of that level with the sum of the two nodes we've just calculated on + // this level. + if l.level == maxBits { + // All done! + break + } + levels[l.level+1].nextPairFreq = prevFreq + l.lastFreq + level++ + } else { + // If we stole from below, move down temporarily to replenish it. + for levels[level-1].needed > 0 { + level-- + } + } + } + + // Somethings is wrong if at the end, the top level is null or hasn't used + // all of the leaves. + if leafCounts[maxBits][maxBits] != n { + panic("leafCounts[maxBits][maxBits] != n") + } + + bitCount := h.bitCount[:maxBits+1] + bits := 1 + counts := &leafCounts[maxBits] + for level := maxBits; level > 0; level-- { + // chain.leafCount gives the number of literals requiring at least "bits" + // bits to encode. + bitCount[bits] = counts[level] - counts[level-1] + bits++ + } + return bitCount +} + +// Look at the leaves and assign them a bit count and an encoding as specified +// in RFC 1951 3.2.2 +func (h *huffmanEncoder) assignEncodingAndSize(bitCount []int32, list []literalNode) { + code := uint16(0) + for n, bits := range bitCount { + code <<= 1 + if n == 0 || bits == 0 { + continue + } + // The literals list[len(list)-bits] .. list[len(list)-bits] + // are encoded using "bits" bits, and get the values + // code, code + 1, .... The code values are + // assigned in literal order (not frequency order). + chunk := list[len(list)-int(bits):] + + h.lns.sort(chunk) + for _, node := range chunk { + h.codes[node.literal] = hcode{code: reverseBits(code, uint8(n)), len: uint16(n)} + code++ + } + list = list[0 : len(list)-int(bits)] + } +} + +// Update this Huffman Code object to be the minimum code for the specified frequency count. +// +// freq is an array of frequencies, in which freq[i] gives the frequency of literal i. +// maxBits The maximum number of bits to use for any literal. +func (h *huffmanEncoder) generate(freq []int32, maxBits int32) { + if h.freqcache == nil { + // Allocate a reusable buffer with the longest possible frequency table. + // Possible lengths are codegenCodeCount, offsetCodeCount and maxNumLit. + // The largest of these is maxNumLit, so we allocate for that case. + h.freqcache = make([]literalNode, maxNumLit+1) + } + list := h.freqcache[:len(freq)+1] + // Number of non-zero literals + count := 0 + // Set list to be the set of all non-zero literals and their frequencies + for i, f := range freq { + if f != 0 { + list[count] = literalNode{uint16(i), f} + count++ + } else { + h.codes[i].len = 0 + } + } + + list = list[:count] + if count <= 2 { + // Handle the small cases here, because they are awkward for the general case code. With + // two or fewer literals, everything has bit length 1. + for i, node := range list { + // "list" is in order of increasing literal value. + h.codes[node.literal].set(uint16(i), 1) + } + return + } + h.lfs.sort(list) + + // Get the number of literals for each bit count + bitCount := h.bitCounts(list, maxBits) + // And do the assignment + h.assignEncodingAndSize(bitCount, list) +} + +type byLiteral []literalNode + +func (s *byLiteral) sort(a []literalNode) { + *s = byLiteral(a) + sort.Sort(s) +} + +func (s byLiteral) Len() int { return len(s) } + +func (s byLiteral) Less(i, j int) bool { + return s[i].literal < s[j].literal +} + +func (s byLiteral) Swap(i, j int) { s[i], s[j] = s[j], s[i] } + +type byFreq []literalNode + +func (s *byFreq) sort(a []literalNode) { + *s = byFreq(a) + sort.Sort(s) +} + +func (s byFreq) Len() int { return len(s) } + +func (s byFreq) Less(i, j int) bool { + if s[i].freq == s[j].freq { + return s[i].literal < s[j].literal + } + return s[i].freq < s[j].freq +} + +func (s byFreq) Swap(i, j int) { s[i], s[j] = s[j], s[i] } + +func reverseBits(number uint16, bitLength byte) uint16 { + return bits.Reverse16(number << (16 - bitLength)) +} diff --git a/src/compress/flate/inflate.go b/src/compress/flate/inflate.go new file mode 100644 index 0000000..7efd447 --- /dev/null +++ b/src/compress/flate/inflate.go @@ -0,0 +1,825 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package flate implements the DEFLATE compressed data format, described in +// RFC 1951. The gzip and zlib packages implement access to DEFLATE-based file +// formats. +package flate + +import ( + "bufio" + "io" + "math/bits" + "strconv" + "sync" +) + +const ( + maxCodeLen = 16 // max length of Huffman code + // The next three numbers come from the RFC section 3.2.7, with the + // additional proviso in section 3.2.5 which implies that distance codes + // 30 and 31 should never occur in compressed data. + maxNumLit = 286 + maxNumDist = 30 + numCodes = 19 // number of codes in Huffman meta-code +) + +// Initialize the fixedHuffmanDecoder only once upon first use. +var fixedOnce sync.Once +var fixedHuffmanDecoder huffmanDecoder + +// A CorruptInputError reports the presence of corrupt input at a given offset. +type CorruptInputError int64 + +func (e CorruptInputError) Error() string { + return "flate: corrupt input before offset " + strconv.FormatInt(int64(e), 10) +} + +// An InternalError reports an error in the flate code itself. +type InternalError string + +func (e InternalError) Error() string { return "flate: internal error: " + string(e) } + +// A ReadError reports an error encountered while reading input. +// +// Deprecated: No longer returned. +type ReadError struct { + Offset int64 // byte offset where error occurred + Err error // error returned by underlying Read +} + +func (e *ReadError) Error() string { + return "flate: read error at offset " + strconv.FormatInt(e.Offset, 10) + ": " + e.Err.Error() +} + +// A WriteError reports an error encountered while writing output. +// +// Deprecated: No longer returned. +type WriteError struct { + Offset int64 // byte offset where error occurred + Err error // error returned by underlying Write +} + +func (e *WriteError) Error() string { + return "flate: write error at offset " + strconv.FormatInt(e.Offset, 10) + ": " + e.Err.Error() +} + +// Resetter resets a ReadCloser returned by NewReader or NewReaderDict +// to switch to a new underlying Reader. This permits reusing a ReadCloser +// instead of allocating a new one. +type Resetter interface { + // Reset discards any buffered data and resets the Resetter as if it was + // newly initialized with the given reader. + Reset(r io.Reader, dict []byte) error +} + +// The data structure for decoding Huffman tables is based on that of +// zlib. There is a lookup table of a fixed bit width (huffmanChunkBits), +// For codes smaller than the table width, there are multiple entries +// (each combination of trailing bits has the same value). For codes +// larger than the table width, the table contains a link to an overflow +// table. The width of each entry in the link table is the maximum code +// size minus the chunk width. +// +// Note that you can do a lookup in the table even without all bits +// filled. Since the extra bits are zero, and the DEFLATE Huffman codes +// have the property that shorter codes come before longer ones, the +// bit length estimate in the result is a lower bound on the actual +// number of bits. +// +// See the following: +// https://github.com/madler/zlib/raw/master/doc/algorithm.txt + +// chunk & 15 is number of bits +// chunk >> 4 is value, including table link + +const ( + huffmanChunkBits = 9 + huffmanNumChunks = 1 << huffmanChunkBits + huffmanCountMask = 15 + huffmanValueShift = 4 +) + +type huffmanDecoder struct { + min int // the minimum code length + chunks [huffmanNumChunks]uint32 // chunks as described above + links [][]uint32 // overflow links + linkMask uint32 // mask the width of the link table +} + +// Initialize Huffman decoding tables from array of code lengths. +// Following this function, h is guaranteed to be initialized into a complete +// tree (i.e., neither over-subscribed nor under-subscribed). The exception is a +// degenerate case where the tree has only a single symbol with length 1. Empty +// trees are permitted. +func (h *huffmanDecoder) init(lengths []int) bool { + // Sanity enables additional runtime tests during Huffman + // table construction. It's intended to be used during + // development to supplement the currently ad-hoc unit tests. + const sanity = false + + if h.min != 0 { + *h = huffmanDecoder{} + } + + // Count number of codes of each length, + // compute min and max length. + var count [maxCodeLen]int + var min, max int + for _, n := range lengths { + if n == 0 { + continue + } + if min == 0 || n < min { + min = n + } + if n > max { + max = n + } + count[n]++ + } + + // Empty tree. The decompressor.huffSym function will fail later if the tree + // is used. Technically, an empty tree is only valid for the HDIST tree and + // not the HCLEN and HLIT tree. However, a stream with an empty HCLEN tree + // is guaranteed to fail since it will attempt to use the tree to decode the + // codes for the HLIT and HDIST trees. Similarly, an empty HLIT tree is + // guaranteed to fail later since the compressed data section must be + // composed of at least one symbol (the end-of-block marker). + if max == 0 { + return true + } + + code := 0 + var nextcode [maxCodeLen]int + for i := min; i <= max; i++ { + code <<= 1 + nextcode[i] = code + code += count[i] + } + + // Check that the coding is complete (i.e., that we've + // assigned all 2-to-the-max possible bit sequences). + // Exception: To be compatible with zlib, we also need to + // accept degenerate single-code codings. See also + // TestDegenerateHuffmanCoding. + if code != 1<<uint(max) && !(code == 1 && max == 1) { + return false + } + + h.min = min + if max > huffmanChunkBits { + numLinks := 1 << (uint(max) - huffmanChunkBits) + h.linkMask = uint32(numLinks - 1) + + // create link tables + link := nextcode[huffmanChunkBits+1] >> 1 + h.links = make([][]uint32, huffmanNumChunks-link) + for j := uint(link); j < huffmanNumChunks; j++ { + reverse := int(bits.Reverse16(uint16(j))) + reverse >>= uint(16 - huffmanChunkBits) + off := j - uint(link) + if sanity && h.chunks[reverse] != 0 { + panic("impossible: overwriting existing chunk") + } + h.chunks[reverse] = uint32(off<<huffmanValueShift | (huffmanChunkBits + 1)) + h.links[off] = make([]uint32, numLinks) + } + } + + for i, n := range lengths { + if n == 0 { + continue + } + code := nextcode[n] + nextcode[n]++ + chunk := uint32(i<<huffmanValueShift | n) + reverse := int(bits.Reverse16(uint16(code))) + reverse >>= uint(16 - n) + if n <= huffmanChunkBits { + for off := reverse; off < len(h.chunks); off += 1 << uint(n) { + // We should never need to overwrite + // an existing chunk. Also, 0 is + // never a valid chunk, because the + // lower 4 "count" bits should be + // between 1 and 15. + if sanity && h.chunks[off] != 0 { + panic("impossible: overwriting existing chunk") + } + h.chunks[off] = chunk + } + } else { + j := reverse & (huffmanNumChunks - 1) + if sanity && h.chunks[j]&huffmanCountMask != huffmanChunkBits+1 { + // Longer codes should have been + // associated with a link table above. + panic("impossible: not an indirect chunk") + } + value := h.chunks[j] >> huffmanValueShift + linktab := h.links[value] + reverse >>= huffmanChunkBits + for off := reverse; off < len(linktab); off += 1 << uint(n-huffmanChunkBits) { + if sanity && linktab[off] != 0 { + panic("impossible: overwriting existing chunk") + } + linktab[off] = chunk + } + } + } + + if sanity { + // Above we've sanity checked that we never overwrote + // an existing entry. Here we additionally check that + // we filled the tables completely. + for i, chunk := range h.chunks { + if chunk == 0 { + // As an exception, in the degenerate + // single-code case, we allow odd + // chunks to be missing. + if code == 1 && i%2 == 1 { + continue + } + panic("impossible: missing chunk") + } + } + for _, linktab := range h.links { + for _, chunk := range linktab { + if chunk == 0 { + panic("impossible: missing chunk") + } + } + } + } + + return true +} + +// The actual read interface needed by NewReader. +// If the passed in io.Reader does not also have ReadByte, +// the NewReader will introduce its own buffering. +type Reader interface { + io.Reader + io.ByteReader +} + +// Decompress state. +type decompressor struct { + // Input source. + r Reader + roffset int64 + + // Input bits, in top of b. + b uint32 + nb uint + + // Huffman decoders for literal/length, distance. + h1, h2 huffmanDecoder + + // Length arrays used to define Huffman codes. + bits *[maxNumLit + maxNumDist]int + codebits *[numCodes]int + + // Output history, buffer. + dict dictDecoder + + // Temporary buffer (avoids repeated allocation). + buf [4]byte + + // Next step in the decompression, + // and decompression state. + step func(*decompressor) + stepState int + final bool + err error + toRead []byte + hl, hd *huffmanDecoder + copyLen int + copyDist int +} + +func (f *decompressor) nextBlock() { + for f.nb < 1+2 { + if f.err = f.moreBits(); f.err != nil { + return + } + } + f.final = f.b&1 == 1 + f.b >>= 1 + typ := f.b & 3 + f.b >>= 2 + f.nb -= 1 + 2 + switch typ { + case 0: + f.dataBlock() + case 1: + // compressed, fixed Huffman tables + f.hl = &fixedHuffmanDecoder + f.hd = nil + f.huffmanBlock() + case 2: + // compressed, dynamic Huffman tables + if f.err = f.readHuffman(); f.err != nil { + break + } + f.hl = &f.h1 + f.hd = &f.h2 + f.huffmanBlock() + default: + // 3 is reserved. + f.err = CorruptInputError(f.roffset) + } +} + +func (f *decompressor) Read(b []byte) (int, error) { + for { + if len(f.toRead) > 0 { + n := copy(b, f.toRead) + f.toRead = f.toRead[n:] + if len(f.toRead) == 0 { + return n, f.err + } + return n, nil + } + if f.err != nil { + return 0, f.err + } + f.step(f) + if f.err != nil && len(f.toRead) == 0 { + f.toRead = f.dict.readFlush() // Flush what's left in case of error + } + } +} + +func (f *decompressor) Close() error { + if f.err == io.EOF { + return nil + } + return f.err +} + +// RFC 1951 section 3.2.7. +// Compression with dynamic Huffman codes + +var codeOrder = [...]int{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15} + +func (f *decompressor) readHuffman() error { + // HLIT[5], HDIST[5], HCLEN[4]. + for f.nb < 5+5+4 { + if err := f.moreBits(); err != nil { + return err + } + } + nlit := int(f.b&0x1F) + 257 + if nlit > maxNumLit { + return CorruptInputError(f.roffset) + } + f.b >>= 5 + ndist := int(f.b&0x1F) + 1 + if ndist > maxNumDist { + return CorruptInputError(f.roffset) + } + f.b >>= 5 + nclen := int(f.b&0xF) + 4 + // numCodes is 19, so nclen is always valid. + f.b >>= 4 + f.nb -= 5 + 5 + 4 + + // (HCLEN+4)*3 bits: code lengths in the magic codeOrder order. + for i := 0; i < nclen; i++ { + for f.nb < 3 { + if err := f.moreBits(); err != nil { + return err + } + } + f.codebits[codeOrder[i]] = int(f.b & 0x7) + f.b >>= 3 + f.nb -= 3 + } + for i := nclen; i < len(codeOrder); i++ { + f.codebits[codeOrder[i]] = 0 + } + if !f.h1.init(f.codebits[0:]) { + return CorruptInputError(f.roffset) + } + + // HLIT + 257 code lengths, HDIST + 1 code lengths, + // using the code length Huffman code. + for i, n := 0, nlit+ndist; i < n; { + x, err := f.huffSym(&f.h1) + if err != nil { + return err + } + if x < 16 { + // Actual length. + f.bits[i] = x + i++ + continue + } + // Repeat previous length or zero. + var rep int + var nb uint + var b int + switch x { + default: + return InternalError("unexpected length code") + case 16: + rep = 3 + nb = 2 + if i == 0 { + return CorruptInputError(f.roffset) + } + b = f.bits[i-1] + case 17: + rep = 3 + nb = 3 + b = 0 + case 18: + rep = 11 + nb = 7 + b = 0 + } + for f.nb < nb { + if err := f.moreBits(); err != nil { + return err + } + } + rep += int(f.b & uint32(1<<nb-1)) + f.b >>= nb + f.nb -= nb + if i+rep > n { + return CorruptInputError(f.roffset) + } + for j := 0; j < rep; j++ { + f.bits[i] = b + i++ + } + } + + if !f.h1.init(f.bits[0:nlit]) || !f.h2.init(f.bits[nlit:nlit+ndist]) { + return CorruptInputError(f.roffset) + } + + // As an optimization, we can initialize the min bits to read at a time + // for the HLIT tree to the length of the EOB marker since we know that + // every block must terminate with one. This preserves the property that + // we never read any extra bytes after the end of the DEFLATE stream. + if f.h1.min < f.bits[endBlockMarker] { + f.h1.min = f.bits[endBlockMarker] + } + + return nil +} + +// Decode a single Huffman block from f. +// hl and hd are the Huffman states for the lit/length values +// and the distance values, respectively. If hd == nil, using the +// fixed distance encoding associated with fixed Huffman blocks. +func (f *decompressor) huffmanBlock() { + const ( + stateInit = iota // Zero value must be stateInit + stateDict + ) + + switch f.stepState { + case stateInit: + goto readLiteral + case stateDict: + goto copyHistory + } + +readLiteral: + // Read literal and/or (length, distance) according to RFC section 3.2.3. + { + v, err := f.huffSym(f.hl) + if err != nil { + f.err = err + return + } + var n uint // number of bits extra + var length int + switch { + case v < 256: + f.dict.writeByte(byte(v)) + if f.dict.availWrite() == 0 { + f.toRead = f.dict.readFlush() + f.step = (*decompressor).huffmanBlock + f.stepState = stateInit + return + } + goto readLiteral + case v == 256: + f.finishBlock() + return + // otherwise, reference to older data + case v < 265: + length = v - (257 - 3) + n = 0 + case v < 269: + length = v*2 - (265*2 - 11) + n = 1 + case v < 273: + length = v*4 - (269*4 - 19) + n = 2 + case v < 277: + length = v*8 - (273*8 - 35) + n = 3 + case v < 281: + length = v*16 - (277*16 - 67) + n = 4 + case v < 285: + length = v*32 - (281*32 - 131) + n = 5 + case v < maxNumLit: + length = 258 + n = 0 + default: + f.err = CorruptInputError(f.roffset) + return + } + if n > 0 { + for f.nb < n { + if err = f.moreBits(); err != nil { + f.err = err + return + } + } + length += int(f.b & uint32(1<<n-1)) + f.b >>= n + f.nb -= n + } + + var dist int + if f.hd == nil { + for f.nb < 5 { + if err = f.moreBits(); err != nil { + f.err = err + return + } + } + dist = int(bits.Reverse8(uint8(f.b & 0x1F << 3))) + f.b >>= 5 + f.nb -= 5 + } else { + if dist, err = f.huffSym(f.hd); err != nil { + f.err = err + return + } + } + + switch { + case dist < 4: + dist++ + case dist < maxNumDist: + nb := uint(dist-2) >> 1 + // have 1 bit in bottom of dist, need nb more. + extra := (dist & 1) << nb + for f.nb < nb { + if err = f.moreBits(); err != nil { + f.err = err + return + } + } + extra |= int(f.b & uint32(1<<nb-1)) + f.b >>= nb + f.nb -= nb + dist = 1<<(nb+1) + 1 + extra + default: + f.err = CorruptInputError(f.roffset) + return + } + + // No check on length; encoding can be prescient. + if dist > f.dict.histSize() { + f.err = CorruptInputError(f.roffset) + return + } + + f.copyLen, f.copyDist = length, dist + goto copyHistory + } + +copyHistory: + // Perform a backwards copy according to RFC section 3.2.3. + { + cnt := f.dict.tryWriteCopy(f.copyDist, f.copyLen) + if cnt == 0 { + cnt = f.dict.writeCopy(f.copyDist, f.copyLen) + } + f.copyLen -= cnt + + if f.dict.availWrite() == 0 || f.copyLen > 0 { + f.toRead = f.dict.readFlush() + f.step = (*decompressor).huffmanBlock // We need to continue this work + f.stepState = stateDict + return + } + goto readLiteral + } +} + +// Copy a single uncompressed data block from input to output. +func (f *decompressor) dataBlock() { + // Uncompressed. + // Discard current half-byte. + f.nb = 0 + f.b = 0 + + // Length then ones-complement of length. + nr, err := io.ReadFull(f.r, f.buf[0:4]) + f.roffset += int64(nr) + if err != nil { + f.err = noEOF(err) + return + } + n := int(f.buf[0]) | int(f.buf[1])<<8 + nn := int(f.buf[2]) | int(f.buf[3])<<8 + if uint16(nn) != uint16(^n) { + f.err = CorruptInputError(f.roffset) + return + } + + if n == 0 { + f.toRead = f.dict.readFlush() + f.finishBlock() + return + } + + f.copyLen = n + f.copyData() +} + +// copyData copies f.copyLen bytes from the underlying reader into f.hist. +// It pauses for reads when f.hist is full. +func (f *decompressor) copyData() { + buf := f.dict.writeSlice() + if len(buf) > f.copyLen { + buf = buf[:f.copyLen] + } + + cnt, err := io.ReadFull(f.r, buf) + f.roffset += int64(cnt) + f.copyLen -= cnt + f.dict.writeMark(cnt) + if err != nil { + f.err = noEOF(err) + return + } + + if f.dict.availWrite() == 0 || f.copyLen > 0 { + f.toRead = f.dict.readFlush() + f.step = (*decompressor).copyData + return + } + f.finishBlock() +} + +func (f *decompressor) finishBlock() { + if f.final { + if f.dict.availRead() > 0 { + f.toRead = f.dict.readFlush() + } + f.err = io.EOF + } + f.step = (*decompressor).nextBlock +} + +// noEOF returns err, unless err == io.EOF, in which case it returns io.ErrUnexpectedEOF. +func noEOF(e error) error { + if e == io.EOF { + return io.ErrUnexpectedEOF + } + return e +} + +func (f *decompressor) moreBits() error { + c, err := f.r.ReadByte() + if err != nil { + return noEOF(err) + } + f.roffset++ + f.b |= uint32(c) << f.nb + f.nb += 8 + return nil +} + +// Read the next Huffman-encoded symbol from f according to h. +func (f *decompressor) huffSym(h *huffmanDecoder) (int, error) { + // Since a huffmanDecoder can be empty or be composed of a degenerate tree + // with single element, huffSym must error on these two edge cases. In both + // cases, the chunks slice will be 0 for the invalid sequence, leading it + // satisfy the n == 0 check below. + n := uint(h.min) + // Optimization. Compiler isn't smart enough to keep f.b,f.nb in registers, + // but is smart enough to keep local variables in registers, so use nb and b, + // inline call to moreBits and reassign b,nb back to f on return. + nb, b := f.nb, f.b + for { + for nb < n { + c, err := f.r.ReadByte() + if err != nil { + f.b = b + f.nb = nb + return 0, noEOF(err) + } + f.roffset++ + b |= uint32(c) << (nb & 31) + nb += 8 + } + chunk := h.chunks[b&(huffmanNumChunks-1)] + n = uint(chunk & huffmanCountMask) + if n > huffmanChunkBits { + chunk = h.links[chunk>>huffmanValueShift][(b>>huffmanChunkBits)&h.linkMask] + n = uint(chunk & huffmanCountMask) + } + if n <= nb { + if n == 0 { + f.b = b + f.nb = nb + f.err = CorruptInputError(f.roffset) + return 0, f.err + } + f.b = b >> (n & 31) + f.nb = nb - n + return int(chunk >> huffmanValueShift), nil + } + } +} + +func makeReader(r io.Reader) Reader { + if rr, ok := r.(Reader); ok { + return rr + } + return bufio.NewReader(r) +} + +func fixedHuffmanDecoderInit() { + fixedOnce.Do(func() { + // These come from the RFC section 3.2.6. + var bits [288]int + for i := 0; i < 144; i++ { + bits[i] = 8 + } + for i := 144; i < 256; i++ { + bits[i] = 9 + } + for i := 256; i < 280; i++ { + bits[i] = 7 + } + for i := 280; i < 288; i++ { + bits[i] = 8 + } + fixedHuffmanDecoder.init(bits[:]) + }) +} + +func (f *decompressor) Reset(r io.Reader, dict []byte) error { + *f = decompressor{ + r: makeReader(r), + bits: f.bits, + codebits: f.codebits, + dict: f.dict, + step: (*decompressor).nextBlock, + } + f.dict.init(maxMatchOffset, dict) + return nil +} + +// NewReader returns a new ReadCloser that can be used +// to read the uncompressed version of r. +// If r does not also implement io.ByteReader, +// the decompressor may read more data than necessary from r. +// The reader returns io.EOF after the final block in the DEFLATE stream has +// been encountered. Any trailing data after the final block is ignored. +// +// The ReadCloser returned by NewReader also implements Resetter. +func NewReader(r io.Reader) io.ReadCloser { + fixedHuffmanDecoderInit() + + var f decompressor + f.r = makeReader(r) + f.bits = new([maxNumLit + maxNumDist]int) + f.codebits = new([numCodes]int) + f.step = (*decompressor).nextBlock + f.dict.init(maxMatchOffset, nil) + return &f +} + +// NewReaderDict is like NewReader but initializes the reader +// with a preset dictionary. The returned Reader behaves as if +// the uncompressed data stream started with the given dictionary, +// which has already been read. NewReaderDict is typically used +// to read data compressed by NewWriterDict. +// +// The ReadCloser returned by NewReader also implements Resetter. +func NewReaderDict(r io.Reader, dict []byte) io.ReadCloser { + fixedHuffmanDecoderInit() + + var f decompressor + f.r = makeReader(r) + f.bits = new([maxNumLit + maxNumDist]int) + f.codebits = new([numCodes]int) + f.step = (*decompressor).nextBlock + f.dict.init(maxMatchOffset, dict) + return &f +} diff --git a/src/compress/flate/inflate_test.go b/src/compress/flate/inflate_test.go new file mode 100644 index 0000000..9575be1 --- /dev/null +++ b/src/compress/flate/inflate_test.go @@ -0,0 +1,97 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "io" + "strings" + "testing" +) + +func TestReset(t *testing.T) { + ss := []string{ + "lorem ipsum izzle fo rizzle", + "the quick brown fox jumped over", + } + + deflated := make([]bytes.Buffer, 2) + for i, s := range ss { + w, _ := NewWriter(&deflated[i], 1) + w.Write([]byte(s)) + w.Close() + } + + inflated := make([]bytes.Buffer, 2) + + f := NewReader(&deflated[0]) + io.Copy(&inflated[0], f) + f.(Resetter).Reset(&deflated[1], nil) + io.Copy(&inflated[1], f) + f.Close() + + for i, s := range ss { + if s != inflated[i].String() { + t.Errorf("inflated[%d]:\ngot %q\nwant %q", i, inflated[i], s) + } + } +} + +func TestReaderTruncated(t *testing.T) { + vectors := []struct{ input, output string }{ + {"\x00", ""}, + {"\x00\f", ""}, + {"\x00\f\x00", ""}, + {"\x00\f\x00\xf3\xff", ""}, + {"\x00\f\x00\xf3\xffhello", "hello"}, + {"\x00\f\x00\xf3\xffhello, world", "hello, world"}, + {"\x02", ""}, + {"\xf2H\xcd", "He"}, + {"\xf2H͙0a\u0084\t", "Hel\x90\x90\x90\x90\x90"}, + {"\xf2H͙0a\u0084\t\x00", "Hel\x90\x90\x90\x90\x90"}, + } + + for i, v := range vectors { + r := strings.NewReader(v.input) + zr := NewReader(r) + b, err := io.ReadAll(zr) + if err != io.ErrUnexpectedEOF { + t.Errorf("test %d, error mismatch: got %v, want io.ErrUnexpectedEOF", i, err) + } + if string(b) != v.output { + t.Errorf("test %d, output mismatch: got %q, want %q", i, b, v.output) + } + } +} + +func TestResetDict(t *testing.T) { + dict := []byte("the lorem fox") + ss := []string{ + "lorem ipsum izzle fo rizzle", + "the quick brown fox jumped over", + } + + deflated := make([]bytes.Buffer, len(ss)) + for i, s := range ss { + w, _ := NewWriterDict(&deflated[i], DefaultCompression, dict) + w.Write([]byte(s)) + w.Close() + } + + inflated := make([]bytes.Buffer, len(ss)) + + f := NewReader(nil) + for i := range inflated { + f.(Resetter).Reset(&deflated[i], dict) + io.Copy(&inflated[i], f) + } + f.Close() + + for i, s := range ss { + if s != inflated[i].String() { + t.Errorf("inflated[%d]:\ngot %q\nwant %q", i, inflated[i], s) + } + } +} diff --git a/src/compress/flate/reader_test.go b/src/compress/flate/reader_test.go new file mode 100644 index 0000000..94610fb --- /dev/null +++ b/src/compress/flate/reader_test.go @@ -0,0 +1,98 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "io" + "os" + "runtime" + "strings" + "testing" +) + +func TestNlitOutOfRange(t *testing.T) { + // Trying to decode this bogus flate data, which has a Huffman table + // with nlit=288, should not panic. + io.Copy(io.Discard, NewReader(strings.NewReader( + "\xfc\xfe\x36\xe7\x5e\x1c\xef\xb3\x55\x58\x77\xb6\x56\xb5\x43\xf4"+ + "\x6f\xf2\xd2\xe6\x3d\x99\xa0\x85\x8c\x48\xeb\xf8\xda\x83\x04\x2a"+ + "\x75\xc4\xf8\x0f\x12\x11\xb9\xb4\x4b\x09\xa0\xbe\x8b\x91\x4c"))) +} + +var suites = []struct{ name, file string }{ + // Digits is the digits of the irrational number e. Its decimal representation + // does not repeat, but there are only 10 possible digits, so it should be + // reasonably compressible. + {"Digits", "../testdata/e.txt"}, + // Newton is Isaac Newtons's educational text on Opticks. + {"Newton", "../../testdata/Isaac.Newton-Opticks.txt"}, +} + +func BenchmarkDecode(b *testing.B) { + doBench(b, func(b *testing.B, buf0 []byte, level, n int) { + b.ReportAllocs() + b.StopTimer() + b.SetBytes(int64(n)) + + compressed := new(bytes.Buffer) + w, err := NewWriter(compressed, level) + if err != nil { + b.Fatal(err) + } + for i := 0; i < n; i += len(buf0) { + if len(buf0) > n-i { + buf0 = buf0[:n-i] + } + io.Copy(w, bytes.NewReader(buf0)) + } + w.Close() + buf1 := compressed.Bytes() + buf0, compressed, w = nil, nil, nil + runtime.GC() + b.StartTimer() + for i := 0; i < b.N; i++ { + io.Copy(io.Discard, NewReader(bytes.NewReader(buf1))) + } + }) +} + +var levelTests = []struct { + name string + level int +}{ + {"Huffman", HuffmanOnly}, + {"Speed", BestSpeed}, + {"Default", DefaultCompression}, + {"Compression", BestCompression}, +} + +var sizes = []struct { + name string + n int +}{ + {"1e4", 1e4}, + {"1e5", 1e5}, + {"1e6", 1e6}, +} + +func doBench(b *testing.B, f func(b *testing.B, buf []byte, level, n int)) { + for _, suite := range suites { + buf, err := os.ReadFile(suite.file) + if err != nil { + b.Fatal(err) + } + if len(buf) == 0 { + b.Fatalf("test file %q has no data", suite.file) + } + for _, l := range levelTests { + for _, s := range sizes { + b.Run(suite.name+"/"+l.name+"/"+s.name, func(b *testing.B) { + f(b, buf, l.level, s.n) + }) + } + } + } +} diff --git a/src/compress/flate/testdata/huffman-null-max.dyn.expect b/src/compress/flate/testdata/huffman-null-max.dyn.expect Binary files differnew file mode 100644 index 0000000..c081651 --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.dyn.expect diff --git a/src/compress/flate/testdata/huffman-null-max.dyn.expect-noinput b/src/compress/flate/testdata/huffman-null-max.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..c081651 --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-null-max.golden b/src/compress/flate/testdata/huffman-null-max.golden Binary files differnew file mode 100644 index 0000000..db422ca --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.golden diff --git a/src/compress/flate/testdata/huffman-null-max.in b/src/compress/flate/testdata/huffman-null-max.in Binary files differnew file mode 100644 index 0000000..5dfddf0 --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.in diff --git a/src/compress/flate/testdata/huffman-null-max.wb.expect b/src/compress/flate/testdata/huffman-null-max.wb.expect Binary files differnew file mode 100644 index 0000000..c081651 --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.wb.expect diff --git a/src/compress/flate/testdata/huffman-null-max.wb.expect-noinput b/src/compress/flate/testdata/huffman-null-max.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..c081651 --- /dev/null +++ b/src/compress/flate/testdata/huffman-null-max.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-pi.dyn.expect b/src/compress/flate/testdata/huffman-pi.dyn.expect Binary files differnew file mode 100644 index 0000000..e4396ac --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.dyn.expect diff --git a/src/compress/flate/testdata/huffman-pi.dyn.expect-noinput b/src/compress/flate/testdata/huffman-pi.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..e4396ac --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-pi.golden b/src/compress/flate/testdata/huffman-pi.golden Binary files differnew file mode 100644 index 0000000..23d8f7f --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.golden diff --git a/src/compress/flate/testdata/huffman-pi.in b/src/compress/flate/testdata/huffman-pi.in new file mode 100644 index 0000000..efaed43 --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.in @@ -0,0 +1 @@ +3.141592653589793238462643383279502884197169399375105820974944592307816406286208998628034825342117067982148086513282306647093844609550582231725359408128481117450284102701938521105559644622948954930381964428810975665933446128475648233786783165271201909145648566923460348610454326648213393607260249141273724587006606315588174881520920962829254091715364367892590360011330530548820466521384146951941511609433057270365759591953092186117381932611793105118548074462379962749567351885752724891227938183011949129833673362440656643086021394946395224737190702179860943702770539217176293176752384674818467669405132000568127145263560827785771342757789609173637178721468440901224953430146549585371050792279689258923542019956112129021960864034418159813629774771309960518707211349999998372978049951059731732816096318595024459455346908302642522308253344685035261931188171010003137838752886587533208381420617177669147303598253490428755468731159562863882353787593751957781857780532171226806613001927876611195909216420198938095257201065485863278865936153381827968230301952035301852968995773622599413891249721775283479131515574857242454150695950829533116861727855889075098381754637464939319255060400927701671139009848824012858361603563707660104710181942955596198946767837449448255379774726847104047534646208046684259069491293313677028989152104752162056966024058038150193511253382430035587640247496473263914199272604269922796782354781636009341721641219924586315030286182974555706749838505494588586926995690927210797509302955321165344987202755960236480665499119881834797753566369807426542527862551818417574672890977772793800081647060016145249192173217214772350141441973568548161361157352552133475741849468438523323907394143334547762416862518983569485562099219222184272550254256887671790494601653466804988627232791786085784383827967976681454100953883786360950680064225125205117392984896084128488626945604241965285022210661186306744278622039194945047123713786960956364371917287467764657573962413890865832645995813390478027590099465764078951269468398352595709825822620522489407726719478268482601476990902640136394437455305068203496252451749399651431429809190659250937221696461515709858387410597885959772975498930161753928468138268683868942774155991855925245953959431049972524680845987273644695848653836736222626099124608051243884390451244136549762780797715691435997700129616089441694868555848406353422072225828488648158456028506016842739452267467678895252138522549954666727823986456596116354886230577456498035593634568174324112515076069479451096596094025228879710893145669136867228748940560101503308617928680920874760917824938589009714909675985261365549781893129784821682998948722658804857564014270477555132379641451523746234364542858444795265867821051141354735739523113427166102135969536231442952484937187110145765403590279934403742007310578539062198387447808478489683321445713868751943506430218453191048481005370614680674919278191197939952061419663428754440643745123718192179998391015919561814675142691239748940907186494231961567945208095146550225231603881930142093762137855956638937787083039069792077346722182562599661501421503068038447734549202605414665925201497442850732518666002132434088190710486331734649651453905796268561005508106658796998163574736384052571459102897064140110971206280439039759515677157700420337869936007230558763176359421873125147120532928191826186125867321579198414848829164470609575270695722091756711672291098169091528017350671274858322287183520935396572512108357915136988209144421006751033467110314126711136990865851639831501970165151168517143765761835155650884909989859982387345528331635507647918535893226185489632132933089857064204675259070915481416549859461637180
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-pi.wb.expect b/src/compress/flate/testdata/huffman-pi.wb.expect Binary files differnew file mode 100644 index 0000000..e4396ac --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.wb.expect diff --git a/src/compress/flate/testdata/huffman-pi.wb.expect-noinput b/src/compress/flate/testdata/huffman-pi.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..e4396ac --- /dev/null +++ b/src/compress/flate/testdata/huffman-pi.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-rand-1k.dyn.expect b/src/compress/flate/testdata/huffman-rand-1k.dyn.expect Binary files differnew file mode 100644 index 0000000..09dc798 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.dyn.expect diff --git a/src/compress/flate/testdata/huffman-rand-1k.dyn.expect-noinput b/src/compress/flate/testdata/huffman-rand-1k.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..0c24742 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-rand-1k.golden b/src/compress/flate/testdata/huffman-rand-1k.golden Binary files differnew file mode 100644 index 0000000..09dc798 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.golden diff --git a/src/compress/flate/testdata/huffman-rand-1k.in b/src/compress/flate/testdata/huffman-rand-1k.in Binary files differnew file mode 100644 index 0000000..ce038eb --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.in diff --git a/src/compress/flate/testdata/huffman-rand-1k.wb.expect b/src/compress/flate/testdata/huffman-rand-1k.wb.expect Binary files differnew file mode 100644 index 0000000..09dc798 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.wb.expect diff --git a/src/compress/flate/testdata/huffman-rand-1k.wb.expect-noinput b/src/compress/flate/testdata/huffman-rand-1k.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..0c24742 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-1k.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-rand-limit.dyn.expect b/src/compress/flate/testdata/huffman-rand-limit.dyn.expect Binary files differnew file mode 100644 index 0000000..2d65279 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.dyn.expect diff --git a/src/compress/flate/testdata/huffman-rand-limit.dyn.expect-noinput b/src/compress/flate/testdata/huffman-rand-limit.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..2d65279 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-rand-limit.golden b/src/compress/flate/testdata/huffman-rand-limit.golden Binary files differnew file mode 100644 index 0000000..57e5932 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.golden diff --git a/src/compress/flate/testdata/huffman-rand-limit.in b/src/compress/flate/testdata/huffman-rand-limit.in new file mode 100644 index 0000000..fb5b1be --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.in @@ -0,0 +1,4 @@ +aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa +vH +% ɷ}>lsmIG H1Y4[ 0[|]o# +-#ulpfٱnYԀYwC8ɯ02 F=gnrN!O{k*w(b kQC9/lu>5C.u diff --git a/src/compress/flate/testdata/huffman-rand-limit.wb.expect b/src/compress/flate/testdata/huffman-rand-limit.wb.expect Binary files differnew file mode 100644 index 0000000..881e59c --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.wb.expect diff --git a/src/compress/flate/testdata/huffman-rand-limit.wb.expect-noinput b/src/compress/flate/testdata/huffman-rand-limit.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..881e59c --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-limit.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-rand-max.golden b/src/compress/flate/testdata/huffman-rand-max.golden Binary files differnew file mode 100644 index 0000000..47d53c8 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-max.golden diff --git a/src/compress/flate/testdata/huffman-rand-max.in b/src/compress/flate/testdata/huffman-rand-max.in Binary files differnew file mode 100644 index 0000000..8418633 --- /dev/null +++ b/src/compress/flate/testdata/huffman-rand-max.in diff --git a/src/compress/flate/testdata/huffman-shifts.dyn.expect b/src/compress/flate/testdata/huffman-shifts.dyn.expect Binary files differnew file mode 100644 index 0000000..7812c1c --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.dyn.expect diff --git a/src/compress/flate/testdata/huffman-shifts.dyn.expect-noinput b/src/compress/flate/testdata/huffman-shifts.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..7812c1c --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-shifts.golden b/src/compress/flate/testdata/huffman-shifts.golden Binary files differnew file mode 100644 index 0000000..f513377 --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.golden diff --git a/src/compress/flate/testdata/huffman-shifts.in b/src/compress/flate/testdata/huffman-shifts.in new file mode 100644 index 0000000..7c7a50d --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.in @@ -0,0 +1,2 @@ +101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010
+232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323232323
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-shifts.wb.expect b/src/compress/flate/testdata/huffman-shifts.wb.expect Binary files differnew file mode 100644 index 0000000..7812c1c --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.wb.expect diff --git a/src/compress/flate/testdata/huffman-shifts.wb.expect-noinput b/src/compress/flate/testdata/huffman-shifts.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..7812c1c --- /dev/null +++ b/src/compress/flate/testdata/huffman-shifts.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-text-shift.dyn.expect b/src/compress/flate/testdata/huffman-text-shift.dyn.expect Binary files differnew file mode 100644 index 0000000..71ce3ae --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.dyn.expect diff --git a/src/compress/flate/testdata/huffman-text-shift.dyn.expect-noinput b/src/compress/flate/testdata/huffman-text-shift.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..71ce3ae --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-text-shift.golden b/src/compress/flate/testdata/huffman-text-shift.golden Binary files differnew file mode 100644 index 0000000..ff02311 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.golden diff --git a/src/compress/flate/testdata/huffman-text-shift.in b/src/compress/flate/testdata/huffman-text-shift.in new file mode 100644 index 0000000..cc5c3ad --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.in @@ -0,0 +1,14 @@ +//Copyright2009ThGoAuthor.Allrightrrvd.
+//UofthiourccodigovrndbyBSD-tyl
+//licnthtcnbfoundinthLICENSEfil.
+
+pckgmin
+
+import"o"
+
+funcmin(){
+ vrb=mk([]byt,65535)
+ f,_:=o.Crt("huffmn-null-mx.in")
+ f.Writ(b)
+}
+ABCDEFGHIJKLMNOPQRSTUVXxyz!"#¤%&/?"
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-text-shift.wb.expect b/src/compress/flate/testdata/huffman-text-shift.wb.expect Binary files differnew file mode 100644 index 0000000..71ce3ae --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.wb.expect diff --git a/src/compress/flate/testdata/huffman-text-shift.wb.expect-noinput b/src/compress/flate/testdata/huffman-text-shift.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..71ce3ae --- /dev/null +++ b/src/compress/flate/testdata/huffman-text-shift.wb.expect-noinput diff --git a/src/compress/flate/testdata/huffman-text.dyn.expect b/src/compress/flate/testdata/huffman-text.dyn.expect new file mode 100644 index 0000000..d448727 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.dyn.expect @@ -0,0 +1 @@ + _K0 `K0Aasě)^HIɟb_>4
a=-^
1`_ 1 ő:Y-F66!A`aC;ANyr4ߜU!GKС#r:B[G3.LbFRuM]^⇳(#Z ivB BH2S]u/ֽWTGnr
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-text.dyn.expect-noinput b/src/compress/flate/testdata/huffman-text.dyn.expect-noinput new file mode 100644 index 0000000..d448727 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.dyn.expect-noinput @@ -0,0 +1 @@ + _K0 `K0Aasě)^HIɟb_>4
a=-^
1`_ 1 ő:Y-F66!A`aC;ANyr4ߜU!GKС#r:B[G3.LbFRuM]^⇳(#Z ivB BH2S]u/ֽWTGnr
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-text.golden b/src/compress/flate/testdata/huffman-text.golden new file mode 100644 index 0000000..6d34c61 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.golden @@ -0,0 +1,3 @@ +AK0 xßZLPa!xADI&#IEp] LƿFp 188h$5S- F66!)v.0Y & SN|d2: +t|둍xz9骺Ɏ3 +&&=ôUD=Fu]qUL+>FQYLZofTߵEŴ{Yʶbe
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-text.in b/src/compress/flate/testdata/huffman-text.in new file mode 100644 index 0000000..73398b9 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.in @@ -0,0 +1,13 @@ +// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package main
+
+import "os"
+
+func main() {
+ var b = make([]byte, 65535)
+ f, _ := os.Create("huffman-null-max.in")
+ f.Write(b)
+}
diff --git a/src/compress/flate/testdata/huffman-text.wb.expect b/src/compress/flate/testdata/huffman-text.wb.expect new file mode 100644 index 0000000..d448727 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.wb.expect @@ -0,0 +1 @@ + _K0 `K0Aasě)^HIɟb_>4
a=-^
1`_ 1 ő:Y-F66!A`aC;ANyr4ߜU!GKС#r:B[G3.LbFRuM]^⇳(#Z ivB BH2S]u/ֽWTGnr
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-text.wb.expect-noinput b/src/compress/flate/testdata/huffman-text.wb.expect-noinput new file mode 100644 index 0000000..d448727 --- /dev/null +++ b/src/compress/flate/testdata/huffman-text.wb.expect-noinput @@ -0,0 +1 @@ + _K0 `K0Aasě)^HIɟb_>4
a=-^
1`_ 1 ő:Y-F66!A`aC;ANyr4ߜU!GKС#r:B[G3.LbFRuM]^⇳(#Z ivB BH2S]u/ֽWTGnr
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-zero.dyn.expect b/src/compress/flate/testdata/huffman-zero.dyn.expect Binary files differnew file mode 100644 index 0000000..830348a --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.dyn.expect diff --git a/src/compress/flate/testdata/huffman-zero.dyn.expect-noinput b/src/compress/flate/testdata/huffman-zero.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..830348a --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.dyn.expect-noinput diff --git a/src/compress/flate/testdata/huffman-zero.golden b/src/compress/flate/testdata/huffman-zero.golden Binary files differnew file mode 100644 index 0000000..5abdbaf --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.golden diff --git a/src/compress/flate/testdata/huffman-zero.in b/src/compress/flate/testdata/huffman-zero.in new file mode 100644 index 0000000..349be0e --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.in @@ -0,0 +1 @@ +00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
\ No newline at end of file diff --git a/src/compress/flate/testdata/huffman-zero.wb.expect b/src/compress/flate/testdata/huffman-zero.wb.expect Binary files differnew file mode 100644 index 0000000..dbe401c --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.wb.expect diff --git a/src/compress/flate/testdata/huffman-zero.wb.expect-noinput b/src/compress/flate/testdata/huffman-zero.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..dbe401c --- /dev/null +++ b/src/compress/flate/testdata/huffman-zero.wb.expect-noinput diff --git a/src/compress/flate/testdata/null-long-match.dyn.expect-noinput b/src/compress/flate/testdata/null-long-match.dyn.expect-noinput Binary files differnew file mode 100644 index 0000000..8b92d9f --- /dev/null +++ b/src/compress/flate/testdata/null-long-match.dyn.expect-noinput diff --git a/src/compress/flate/testdata/null-long-match.wb.expect-noinput b/src/compress/flate/testdata/null-long-match.wb.expect-noinput Binary files differnew file mode 100644 index 0000000..8b92d9f --- /dev/null +++ b/src/compress/flate/testdata/null-long-match.wb.expect-noinput diff --git a/src/compress/flate/token.go b/src/compress/flate/token.go new file mode 100644 index 0000000..fc0e494 --- /dev/null +++ b/src/compress/flate/token.go @@ -0,0 +1,97 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +const ( + // 2 bits: type 0 = literal 1=EOF 2=Match 3=Unused + // 8 bits: xlength = length - MIN_MATCH_LENGTH + // 22 bits xoffset = offset - MIN_OFFSET_SIZE, or literal + lengthShift = 22 + offsetMask = 1<<lengthShift - 1 + typeMask = 3 << 30 + literalType = 0 << 30 + matchType = 1 << 30 +) + +// The length code for length X (MIN_MATCH_LENGTH <= X <= MAX_MATCH_LENGTH) +// is lengthCodes[length - MIN_MATCH_LENGTH] +var lengthCodes = [...]uint32{ + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, + 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, + 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, + 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, + 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, + 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, + 19, 19, 19, 19, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, + 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, + 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, + 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, + 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, + 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, + 27, 27, 27, 27, 27, 28, +} + +var offsetCodes = [...]uint32{ + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, + 8, 8, 8, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, + 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, + 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, + 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, + 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +} + +type token uint32 + +// Convert a literal into a literal token. +func literalToken(literal uint32) token { return token(literalType + literal) } + +// Convert a < xlength, xoffset > pair into a match token. +func matchToken(xlength uint32, xoffset uint32) token { + return token(matchType + xlength<<lengthShift + xoffset) +} + +// Returns the literal of a literal token. +func (t token) literal() uint32 { return uint32(t - literalType) } + +// Returns the extra offset of a match token. +func (t token) offset() uint32 { return uint32(t) & offsetMask } + +func (t token) length() uint32 { return uint32((t - matchType) >> lengthShift) } + +func lengthCode(len uint32) uint32 { return lengthCodes[len] } + +// Returns the offset code corresponding to a specific offset. +func offsetCode(off uint32) uint32 { + if off < uint32(len(offsetCodes)) { + return offsetCodes[off] + } + if off>>7 < uint32(len(offsetCodes)) { + return offsetCodes[off>>7] + 14 + } + return offsetCodes[off>>14] + 28 +} diff --git a/src/compress/flate/writer_test.go b/src/compress/flate/writer_test.go new file mode 100644 index 0000000..c413735 --- /dev/null +++ b/src/compress/flate/writer_test.go @@ -0,0 +1,237 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package flate + +import ( + "bytes" + "fmt" + "io" + "math/rand" + "runtime" + "testing" +) + +func BenchmarkEncode(b *testing.B) { + doBench(b, func(b *testing.B, buf0 []byte, level, n int) { + b.StopTimer() + b.SetBytes(int64(n)) + + buf1 := make([]byte, n) + for i := 0; i < n; i += len(buf0) { + if len(buf0) > n-i { + buf0 = buf0[:n-i] + } + copy(buf1[i:], buf0) + } + buf0 = nil + w, err := NewWriter(io.Discard, level) + if err != nil { + b.Fatal(err) + } + runtime.GC() + b.StartTimer() + for i := 0; i < b.N; i++ { + w.Reset(io.Discard) + w.Write(buf1) + w.Close() + } + }) +} + +// errorWriter is a writer that fails after N writes. +type errorWriter struct { + N int +} + +func (e *errorWriter) Write(b []byte) (int, error) { + if e.N <= 0 { + return 0, io.ErrClosedPipe + } + e.N-- + return len(b), nil +} + +// Test if errors from the underlying writer is passed upwards. +func TestWriteError(t *testing.T) { + t.Parallel() + buf := new(bytes.Buffer) + n := 65536 + if !testing.Short() { + n *= 4 + } + for i := 0; i < n; i++ { + fmt.Fprintf(buf, "asdasfasf%d%dfghfgujyut%dyutyu\n", i, i, i) + } + in := buf.Bytes() + // We create our own buffer to control number of writes. + copyBuffer := make([]byte, 128) + for l := 0; l < 10; l++ { + for fail := 1; fail <= 256; fail *= 2 { + // Fail after 'fail' writes + ew := &errorWriter{N: fail} + w, err := NewWriter(ew, l) + if err != nil { + t.Fatalf("NewWriter: level %d: %v", l, err) + } + n, err := io.CopyBuffer(w, struct{ io.Reader }{bytes.NewBuffer(in)}, copyBuffer) + if err == nil { + t.Fatalf("Level %d: Expected an error, writer was %#v", l, ew) + } + n2, err := w.Write([]byte{1, 2, 2, 3, 4, 5}) + if n2 != 0 { + t.Fatal("Level", l, "Expected 0 length write, got", n) + } + if err == nil { + t.Fatal("Level", l, "Expected an error") + } + err = w.Flush() + if err == nil { + t.Fatal("Level", l, "Expected an error on flush") + } + err = w.Close() + if err == nil { + t.Fatal("Level", l, "Expected an error on close") + } + + w.Reset(io.Discard) + n2, err = w.Write([]byte{1, 2, 3, 4, 5, 6}) + if err != nil { + t.Fatal("Level", l, "Got unexpected error after reset:", err) + } + if n2 == 0 { + t.Fatal("Level", l, "Got 0 length write, expected > 0") + } + if testing.Short() { + return + } + } + } +} + +// Test if two runs produce identical results +// even when writing different sizes to the Writer. +func TestDeterministic(t *testing.T) { + t.Parallel() + for i := 0; i <= 9; i++ { + t.Run(fmt.Sprint("L", i), func(t *testing.T) { testDeterministic(i, t) }) + } + t.Run("LM2", func(t *testing.T) { testDeterministic(-2, t) }) +} + +func testDeterministic(i int, t *testing.T) { + t.Parallel() + // Test so much we cross a good number of block boundaries. + var length = maxStoreBlockSize*30 + 500 + if testing.Short() { + length /= 10 + } + + // Create a random, but compressible stream. + rng := rand.New(rand.NewSource(1)) + t1 := make([]byte, length) + for i := range t1 { + t1[i] = byte(rng.Int63() & 7) + } + + // Do our first encode. + var b1 bytes.Buffer + br := bytes.NewBuffer(t1) + w, err := NewWriter(&b1, i) + if err != nil { + t.Fatal(err) + } + // Use a very small prime sized buffer. + cbuf := make([]byte, 787) + _, err = io.CopyBuffer(w, struct{ io.Reader }{br}, cbuf) + if err != nil { + t.Fatal(err) + } + w.Close() + + // We choose a different buffer size, + // bigger than a maximum block, and also a prime. + var b2 bytes.Buffer + cbuf = make([]byte, 81761) + br2 := bytes.NewBuffer(t1) + w2, err := NewWriter(&b2, i) + if err != nil { + t.Fatal(err) + } + _, err = io.CopyBuffer(w2, struct{ io.Reader }{br2}, cbuf) + if err != nil { + t.Fatal(err) + } + w2.Close() + + b1b := b1.Bytes() + b2b := b2.Bytes() + + if !bytes.Equal(b1b, b2b) { + t.Errorf("level %d did not produce deterministic result, result mismatch, len(a) = %d, len(b) = %d", i, len(b1b), len(b2b)) + } +} + +// TestDeflateFast_Reset will test that encoding is consistent +// across a warparound of the table offset. +// See https://github.com/golang/go/issues/34121 +func TestDeflateFast_Reset(t *testing.T) { + buf := new(bytes.Buffer) + n := 65536 + + for i := 0; i < n; i++ { + fmt.Fprintf(buf, "asdfasdfasdfasdf%d%dfghfgujyut%dyutyu\n", i, i, i) + } + // This is specific to level 1. + const level = 1 + in := buf.Bytes() + offset := 1 + if testing.Short() { + offset = 256 + } + + // We do an encode with a clean buffer to compare. + var want bytes.Buffer + w, err := NewWriter(&want, level) + if err != nil { + t.Fatalf("NewWriter: level %d: %v", level, err) + } + + // Output written 3 times. + w.Write(in) + w.Write(in) + w.Write(in) + w.Close() + + for ; offset <= 256; offset *= 2 { + w, err := NewWriter(io.Discard, level) + if err != nil { + t.Fatalf("NewWriter: level %d: %v", level, err) + } + + // Reset until we are right before the wraparound. + // Each reset adds maxMatchOffset to the offset. + for i := 0; i < (bufferReset-len(in)-offset-maxMatchOffset)/maxMatchOffset; i++ { + // skip ahead to where we are close to wrap around... + w.d.reset(nil) + } + var got bytes.Buffer + w.Reset(&got) + + // Write 3 times, close. + for i := 0; i < 3; i++ { + _, err = w.Write(in) + if err != nil { + t.Fatal(err) + } + } + err = w.Close() + if err != nil { + t.Fatal(err) + } + if !bytes.Equal(got.Bytes(), want.Bytes()) { + t.Fatalf("output did not match at wraparound, len(want) = %d, len(got) = %d", want.Len(), got.Len()) + } + } +} |