summaryrefslogtreecommitdiffstats
path: root/doc/internals/api/htx-api.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
commitb46aad6df449445a9fc4aa7b32bd40005438e3f7 (patch)
tree751aa858ca01f35de800164516b298887382919d /doc/internals/api/htx-api.txt
parentInitial commit. (diff)
downloadhaproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.tar.xz
haproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.zip
Adding upstream version 2.9.5.upstream/2.9.5
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/internals/api/htx-api.txt')
-rw-r--r--doc/internals/api/htx-api.txt570
1 files changed, 570 insertions, 0 deletions
diff --git a/doc/internals/api/htx-api.txt b/doc/internals/api/htx-api.txt
new file mode 100644
index 0000000..62b3093
--- /dev/null
+++ b/doc/internals/api/htx-api.txt
@@ -0,0 +1,570 @@
+ -----------------------------------------------
+ HTX API
+ Version 1.1
+ ( Last update: 2021-02-24 )
+ -----------------------------------------------
+ Author : Christopher Faulet
+ Contact : cfaulet at haproxy dot com
+
+1. Background
+
+Historically, HAProxy stored HTTP messages in a raw fashion in buffers, keeping
+parsing information separately in a "struct http_msg" owned by the stream. It was
+optimized to the data transfer, but not so much for rewrites. It was also HTTP/1
+centered. While it was the only HTTP version supported, it was not a
+problem. But with the rise of HTTP/2, it starts to be hard to still use this
+representation.
+
+At the first age of the HTTP/2 in HAProxy, H2 messages were converted into
+H1. This was terribly unefficient because it required two parsing passes, a
+first one in H2 and a second one in H1, with a conversion in the middle. And of
+course, the same was also true in the opposite direction. outgoing H1 messages
+had to be converted back in H2 to be sent. Even worse, because the H2->H1
+conversion, only client H2 connections were supported.
+
+So, to address all these problems, we decided to replace the old raw
+representation by a version-agnostic and self-structured internal HTTP
+representation, the HTX. As an additional benefit, with this new representation,
+the message parsing and its processing are now separated, making all the HTTP
+analysis simpler and cleaner. The parsing of HTTP messages is now handled by
+the multiplexers (h1 or h2).
+
+
+2. The HTX message
+
+The HTX is a structure containing useful information about an HTTP message
+followed by a contiguous array with some parts of the message. These parts are
+called blocks. A block is composed of metadata (htx_blk) and an associated
+payload. Blocks' metadata are stored starting from the end of the array while
+their payload are stored at the beginning. Blocks' metadata are often simply
+called blocks. it is a misuse of language that's simplify explanations.
+
+Internally, this structure is "hidden" in a buffer. This way, there are few
+changes into intermediate layers (stream-interface and channels). They still
+manipulate buffers. Only the multiplexer and the stream have to know how data
+are really stored. From the HTX perspective, a buffer is just a memory
+area. When an HTX message is stored in a buffer, this one appears as full.
+
+ * General view of an HTX message :
+
+
+ buffer->area
+ |
+ |<------------ buffer->size == buffer->data ----------------------|
+ | |
+ | |<------------- Blocks array (htx->size) ------------------>|
+ V | |
+ +-----+-----------------+-------------------------+---------------+
+ | HTX | PAYLOADS ==> | | <== HTX_BLKs |
+ +-----+-----------------+-------------------------+---------------+
+ | | | |
+ |<-payloads part->|<----- free space ------>|<-blocks part->|
+ (htx->data)
+
+
+The blocks part remains linear and sorted. It may be see as an array with
+negative indexes. But, instead of using negative indexes, we use positive
+positions to identify a block. This position is then converted to an address
+relatively to the beginning of the blocks array.
+
+ tail head
+ | |
+ V V
+ .....--+----+-----------------------+------+------+
+ | Bn | ... | B1 | B0 |
+ .....--+----+-----------------------+------+------+
+ ^ ^ ^
+ Addr of the block Addr of the block Addr of the block
+ at the position N at the position 1 at the position 0
+
+
+In the HTX structure, 3 "special" positions are stored :
+
+ - tail : Position of the newest inserted block
+ - head : Position of the oldest inserted block
+ - first : Position of the first block to (re)start the analyse
+
+The blocks part never wrap. If we have no space to allocate a new block and if
+there is a hole at the beginning of the blocks part (so at the end of the blocks
+array), we move back all blocks.
+
+
+ tail head tail head
+ | | | |
+ V V V V
+ ...+--------------+---------+ blocks ...----------+--------------+
+ | X== HTX_BLKS | | defrag | <== HTX_BLKS |
+ ...+--------------+---------+ =====> ...----------+--------------+
+
+
+The payloads part is a raw space that may wrap. A block's payload must never be
+accessed directly. Instead a block must be selected to retrieve the address of
+its payload.
+
+
+ +------------------------( B0.addr )--------------------------+
+ | +-------------------( B1.addr )----------------------+ |
+ | | +-----------( B2.addr )----------------+ | |
+ V V V | | |
+ +-----+----+-------+----+--------+-------------+-------+----+----+----+
+ | HTX | P0 | P1 | P2 | ...==> | | <=... | B2 | B1 | B0 |
+ +-----+----+-------+----+--------+-------------+-------+----+----+----+
+
+
+Because the payloads part may wrap, there are 2 usable free spaces :
+
+ - The free space in front of the blocks part. This one is used if and only if
+ the other one was not used yet.
+
+ - The free space at the beginning of the message. Once this one is used, the
+ other one is never used again, until a message defragmentation.
+
+
+ * Linear payloads part :
+
+
+ head_addr end_addr tail_addr
+ | | |
+ V V V
+ +-----+--------------------+-------------+--------------------+-------...
+ | HTX | | PAYLOADS | | HTX_BLKs
+ +-----+--------------------+-------------+--------------------+-------...
+ |<-- free space 2 -->| |<-- free space 1 -->|
+ (used if the other is too small) (used in priority)
+
+
+ * Wrapping payloads part :
+
+
+ head_addr end_addr tail_addr
+ | | |
+ V V V
+ +-----+----+----------------+--------+----------------+-------+-------...
+ | HTX | | PAYLOADS part2 | | PAYLOADS part1 | | HTX_BLKs
+ +-----+----+----------------+--------+----------------+-------+-------...
+ |<-->| |<------>| |<----->|
+ unusable free space unusable
+ free space free space
+
+
+Finally, when the usable free space is not enough to store a new block, unusable
+parts may be get back with a full defragmentation. The payloads part is then
+realigned at the beginning of the blocks array and the free space becomes
+continuous again.
+
+
+3. The HTX blocks
+
+An HTX block can be as well a start-line as a header, a body part or a
+trailer. For all these types of block, a payload is attached to the block. It
+can also be a marker, the end-of-headers or end-of-trailers. For these blocks,
+there is no payload but it counts for a byte. It is important to not skip it
+when data are forwarded.
+
+As already said, a block is composed of metadata and a payload. Metadata are
+stored in the blocks part and are composed of 2 fields :
+
+ - info : It a 32 bits field containing the block's type on 4 bits followed
+ by the payload length. See below for details.
+
+ - addr : The payload's address, if any, relatively to the beginning the
+ array used to store part of the HTTP message itself.
+
+
+ * Block's info representation :
+
+ 0b 0000 0000 0000 0000 0000 0000 0000 0000
+ ---- ------------------------ ---------
+ type value (1 MB max) name length (header/trailer - 256B max)
+ ----------------------------------
+ data length (256 MB max)
+ (body, method, path, version, status, reason)
+
+
+Supported types are :
+
+ - 0000 (0) : The request start-line
+ - 0001 (1) : The response start-line
+ - 0010 (2) : A header block
+ - 0011 (3) : The end-of-headers marker
+ - 0100 (4) : A data block
+ - 0101 (5) : A trailer block
+ - 0110 (6) : The end-of-trailers marker
+ - 1111 (15) : An unused block
+
+Other types are unused for now and reserved for futur extensions.
+
+An HTX message is typically composed of following blocks, in this order :
+
+ - a start-line
+ - zero or more header blocks
+ - an end-of-headers marker
+ - zero or more data blocks
+ - zero or more trailer blocks (optional)
+ - an end-of-trailers marker (optional but always set if there is at least
+ one trailer block)
+
+Only one HTTP request at a time can be stored in an HTX message. For HTTP
+response, it is more complicated. Only one "final" response can be stored in an
+HTX message. It is a response with status-code 101 or greater or equal to
+200. But it may be preceded by several 1xx informational responses. Such
+responses are part of the same HTX message.
+
+When the end of the message is reached a special flag is set on the message
+(HTX_FL_EOM). It means no more data are expected for this message, except
+tunneled data. But tunneled data will never be mixed with message data to avoid
+ambiguities. Thus once the flag marking the end of the message is set, it is
+easy to know the message ends. The end is reached if the HTX message is empty or
+on the tail HTX block in the HTX message. Once all blocks of the HTX message are
+consumed, tunneled data, if any, may be transferred.
+
+
+3.1. The start-line
+
+Every HTX message starts with a start-line. Its payload is a "struct htx_sl". In
+addition to the parts of the HTTP start-line, this structure contains some
+information about the represented HTTP message, mainly in the form of flags
+(HTX_SL_F_*). For instance, if an HTTP message contains the header
+"conten-length", then the flag HTX_SL_F_CLEN is set.
+
+Each HTTP message has its own start-line. So an HTX request has one and only one
+start-line because it must contain only one HTTP request at a time. But an HTX
+response may have more than one start-line if the final HTTP response is
+precedeed by some 1xx informational responses.
+
+In HTTP/2, there is no start-line. So the H2 multiplexer must create one when it
+converts an H2 message to HTX :
+
+ - For the request, it uses the pseudo headers ":method", ":path" or
+ ":authority" depending on the method and the hardcoded version "HTTP/2.0".
+
+ - For the response, it used the hardcoded version "HTTP/2.0", the
+ pseudo-header ":status" and an empty reason.
+
+
+3.2. The headers and trailers
+
+HTX Headers and trailers are quite similar. Different types are used to simplify
+headers processing. But from the HTX point of view, there is no real difference,
+except their position in the HTX message. The header blocks always follow an HTX
+start-line while trailer blocks come after the data. If there is no data, they
+follow the end-of-headers marker.
+
+Headers and trailers are the only blocks containing a Key/Value payload. The
+corresponding end-of marker must always be placed after each group to mark, as
+it name suggests, the end.
+
+In HTTP/1, trailers are only present on chunked messages. But chunked messages
+do not always have trailers. In this case, the end-of-trailers block may or may
+not be present. Multiplexers must be able to handle both situations. In HTTP/2,
+trailers are only present if a HEADERS frame is sent after DATA frames.
+
+
+3.3. The data
+
+The payload body of an HTTP message is stored as DATA blocks in the HTX
+message. For HTTP/1 messages, it is the message body without the chunks
+formatting, if any. For HTTP/2, it is the payload of DATA frames.
+
+The DATA blocks are the only HTX blocks that may be partially processed (copied
+or removed). All other types of block must be entirely processed. This means
+DATA blocks can be resized.
+
+
+3.4. The end-of markers
+
+These blocks are used to delimit parts of an HTX message. It exists two
+markers :
+
+ - end-of-headers (EOH)
+ - end-of-trailers (EOT)
+
+EOH is always present in an HTX message. EOT is optional.
+
+
+4. The HTX API
+
+
+4.1. Get/set HTX message from/to the underlying buffer
+
+The first thing to do to process an HTX message is to get it from the underlying
+buffer. There are 2 functions to do so, the second one relying on the first :
+
+ - htxbuf() returns an HTX message from a buffer. It does not modify the
+ buffer. It only initialize the HTX message if the buffer is empty.
+
+ - htx_from_buf() uses htxbuf(). But it also updates the underlying buffer so
+ that it appears as full.
+
+Both functions return a "zero-sized" HTX message if the buffer is null. This
+way, the HTX message is always valid. The first function is the default function
+to use. The second one is only useful when some content will be added. For
+instance, it used by the HTX analyzers when HAProxy generates a response. Thus,
+the buffer is in a right state.
+
+Once the processing done, if the HTX message has been modified, the underlying
+buffer must be also updated, except htx_from_buf() was used _AND_ data was only
+added. For all other cases, the function htx_to_buf() must be called.
+
+Finally, the function htx_reset() may be called at any time to reset an HTX
+message. And the function buf_room_for_htx_data() may be called to know if a raw
+buffer is full from the HTX perspective. It is used during conversion from/to
+the HTX.
+
+
+4.2. Helpers to deal with free space in an HTX message
+
+Once with an HTX message, following functions may help to process it :
+
+ - htx_used_space() and htx_meta_space() return, respectively, the total
+ space used in an HTX message and the space used by block's metadata only.
+
+ - htx_free_space() and htx_free_data_space() return, respectively, the total
+ free space in an HTX message and the free space available for the payload
+ if a new HTX block is stored (so it is the total free space minus the size
+ of an HTX block).
+
+ - htx_is_empty() and htx_is_not_empty() are boolean functions to know if an
+ HTX message is empty or not.
+
+ - htx_get_max_blksz() returns the maximum size available for the payload,
+ not exceeding a maximum, metadata included.
+
+ - htx_almost_full() should be used to know if an HTX message uses at least
+ 3/4 of its capacity.
+
+
+4.3. HTX Blocks manipulations
+
+Once the available sapce in an HTX message is known, the next step is to add HTX
+blocks. First of all the function htx_nbblks() returns the number of blocks
+allocated in an HTX message. Then, there is an add function per block's type :
+
+ - htx_add_stline() adds a start-line. The type (request or response) and the
+ flags of the start-line must be provided, as well as its three parts
+ (method,uri,version or version,status-code,reason).
+
+ - htx_add_header() and htx_add_trailers() are similar. The name and the
+ value must be provided. The inserted HTX block is returned on success or
+ NULL if an error occurred.
+
+ - htx_add_endof() must be used to add any end-of marker. The block's type
+ (EOH or EOT) must be specified. The inserted HTX block is returned on
+ success or NULL if an error occurred.
+
+ - htx_add_all_headers() and htx_add_all_trailers() add, respectively, a list
+ of headers and a list of trailers, followed by the appropriate end-of
+ marker. On success, this marker is returned. Otherwise, NULL is
+ returned. Note there is no rollback on the HTX message when an error
+ occurred. Some headers or trailers may have been added. So it is the
+ caller responsibility to take care of that.
+
+ - htx_add_data() must be used to add a DATA block. Unlike previous
+ functions, this one returns the number of bytes copied or 0 if nothing was
+ copied. If possible, the data are appended to the tail block if it is a
+ DATA block. Only a part of the payload may be copied because this function
+ will try to limit the message defragmentation and the wrapping of blocks
+ as far as possible.
+
+ - htx_add_data_atonce() must be used if all data must be added or nothing.
+ It tries to insert all the payload, this function returns the inserted
+ block on success. Otherwise it returns NULL.
+
+When an HTX block is added, it is always the last one (the tail). But, if a
+block must be added at a specific place, it is not really handy. 2 functions may
+help (others could be added) :
+
+ - htx_add_last_data() adds a DATA block just after all other DATA blocks and
+ before any trailers and EOT marker. It relies on htx_add_data_atonce(), so
+ a defragmentation may be performed.
+
+ - htx_move_blk_before() moves a specific block just after another one. Both
+ blocks must already be in the HTX message and the block to move must
+ always be placed after the "pivot".
+
+Once added, there are three functions to update the block's payload :
+
+ - htx_replace_stline() updates a start-line. The HTX block must be passed as
+ argument. Only string parts of the start-line are updated by this
+ function. On success, it returns the new start-line. So it is pretty easy
+ to update its flags. NULL is returned if an error occurred.
+
+ - htx_replace_header() fully replaces a header (its name and its value) by a
+ new one. The HTX block must be passed a argument, as well as its new name
+ and its new value. The new header can be smaller or larger than the old
+ one. This function returns the new HTX block on success, or NULL is an
+ error occurred.
+
+ - htx_replace_blk_value() replaces a part of a block's payload or its
+ totality. It works for HEADERS, TRAILERS or DATA blocks. The HTX block
+ must be provided with the part to remove and the new one. The new part can
+ be smaller or larger than the old one. This function returns the new HTX
+ block on success, or NULL is an error occurred.
+
+ - htx_change_blk_value_len() changes the size of the value. It is the caller
+ responsibility to change the value itself, make sure there is enough space
+ and update allocated value. This function updates the HTX message
+ accordingly.
+
+ - htx_set_blk_value_len() changes the size of the value. It is the caller
+ responsibility to change the value itself, make sure there is enough space
+ and update allocated value. Unlike the function
+ htx_change_blk_value_len(), this one does not update the HTX message. So
+ it should be used with caution.
+
+ - htx_cut_data_blk() removes <n> bytes from the beginning of a DATA
+ block. The block's start address and its length are adjusted, and the
+ htx's total data count is updated. This is used to mark that part of some
+ data were transferred from a DATA block without removing this DATA
+ block. No sanity check is performed, the caller is responsible for doing
+ this exclusively on DATA blocks, and never removing more than the block's
+ size.
+
+ - htx_remove_blk() removes a block from an HTX message. It returns the
+ following block or NULL if it is the tail block.
+
+Finally, a block may be removed using the function htx_remove_blk(). This
+function returns the block following the one removed or NULL if it is the tail
+block.
+
+
+4.4. The HTX start-line
+
+Unlike other HTX blocks, the start-line is a bit special because its payload is
+a structure followed by its three parts :
+
+ +--------+-------+-------+-------+
+ | HTX_SL | PART1 | PART2 | PART3 |
+ +--------+-------+-------+-------+
+
+Some macros and functions may help to manipulate these parts :
+
+ - HTX_SL_P{N}_LEN() and HTX_SL_P{N}_PTR() are macros to get the length of a
+ part and a pointer on it. {N} should be 1, 2 or 3.
+
+ - HTX_SL_REQ_MLEN(), HTX_SL_REQ_ULEN(), HTX_SL_REQ_VLEN(),
+ HTX_SL_REQ_MPTR(), HTX_SL_REQ_UPTR() and HTX_SL_REQ_VPTR() are macros to
+ get info about a request start-line. These macros only wrap HTX_SL_P*
+ ones.
+
+ - HTX_SL_RES_VLEN(), HTX_SL_RES_CLEN(), HTX_SL_RES_RLEN(),
+ HTX_SL_RES_VPTR(), HTX_SL_RES_CPTR() and HTX_SL_RES_RPTR() are macros to
+ get info about a response start-line. These macros only wrap HTX_SL_P*
+ ones.
+
+ - htx_sl_p1(), htx_sl_p2() and htx_sl_p2() are functions to get the ist
+ corresponding to the right part of a start-line.
+
+ - htx_sl_req_meth(), htx_sl_req_uri() and htx_sl_req_vsn() get the ist
+ corresponding to the right part of a request start-line.
+
+ - htx_sl_res_vsn(), htx_sl_res_code() and htx_sl_res_reason() get the ist
+ corresponding to the right part of a response start-line.
+
+
+4.5. Iterate on the HTX message
+
+To iterate on an HTX message, the first thing to do is to get the HTX block to
+start the loop. There are three special blocks in an HTX message that may be
+good candidates to start a loop :
+
+ - the head block. It is the oldest inserted block. Multiplexers always start
+ to consume an HTX message from this block. The function htx_get_head()
+ returns its position and htx_get_head_blk() returns the blocks itself. In
+ addition, the function htx_get_head_type() returns its block's type.
+
+ - the tail block. It is the newest inserted block. The function
+ htx_get_tail() returns its position and htx_get_tail_blk() returns the
+ blocks itself. In addition, the function htx_get_tail_type() returns its
+ block's type.
+
+ - the first block. It is the block where to (re)start the analyse. It is
+ used as start point by HTX analyzers. The function htx_get_first() returns
+ its position and htx_get_first_blk() returns the blocks itself. In
+ addition, the function htx_get_first_type() returns its block's type.
+
+For all these functions, if the HTX message is empty, -1 is returned for the
+block's position, NULL instead of a block and HTX_BLK_UNUSED for its type.
+
+Then to iterate on blocks, foreword or backward :
+
+ - htx_get_prev() and htx_get_next() return, respectively, the position of
+ the previous block or the next block, given a specific position. Or -1 if
+ an edge is reached.
+
+ - htx_get_prev_blk() and htx_get_next_blk() return, respectively, the
+ previous block or the next one, given a specific block. Or NULL if an edge
+ is reached.
+
+4.6. Access block content and info
+
+Following functions may be used to retrieve information about a specific HTX
+block :
+
+ - htx_get_blk_pos() returns the position of a block. It must be in the HTX
+ message.
+
+ - htx_get_blk_ptr() returns a pointer on the payload of a block.
+
+ - htx_get_blk_type() returns the type of a block.
+
+ - htx_get_blksz() returns the payload size of a block
+
+ - htx_get_blk_name() returns the name of a block, only if it is a header or
+ a trailer. Otherwise, it returns an empty string.
+
+ - htx_get_blk_value() returns the value of a block, depending on its
+ type. For header and trailer blocks, it is the value field. For markers
+ (EOH or EOT), an empty string is returned. For other blocks an ist
+ pointing on the block payload is returned.
+
+ - htx_is_unique_blk() may be used to know if a block is the only one
+ remaining inside an HTX message, excluding unused blocks. This function is
+ pretty useful to determine the end of a HTX message, in conjunction with
+ HTX_FL_EOM flag.
+
+4.7. Advanced functions
+
+Some more advanced functions may be used to do complex processing on the HTX
+message. These functions are used by HTX analyzers or by multiplexers.
+
+ - htx_truncate() removes all blocks after the one containing a specific
+ offset relatively to the head block of the HTX message. If the offset is
+ inside a DATA block, it is truncated. For all other blocks, the removal
+ starts to the next block.
+
+ - htx_drain() tries to remove a specific amount of bytes of payload. If the
+ tail block is a DATA block, it may be truncated if necessary. All other
+ block are removed at once or kept. This function returns a mixed value,
+ with the first block not removed, or NULL if everything was removed, and
+ the amount of data drained.
+
+ - htx_xfer_blks() transfers HTX blocks from an HTX message to another,
+ stopping on the first block of a specified type or when a specific amount
+ of bytes, including meta-data, was moved. If the tail block is a DATA
+ block, it may be partially moved. All other block are transferred at once
+ or kept. This function returns a mixed value, with the last block moved,
+ or NULL if nothing was moved, and the amount of data transferred. When
+ HEADERS or TRAILERS blocks must be transferred, this function transfers
+ all of them. Otherwise, if it is not possible, it triggers an error. It is
+ the caller responsibility to transfer all headers or trailers at once.
+
+ - htx_append_msg() append an HTX message to another one. All the message is
+ copied or nothing. So, if an error occurred, a rollback is performed. This
+ function returns 1 on success and 0 on error.
+
+ - htx_reserve_max_data() Reserves the maximum possible size for an HTX data
+ block, by extending an existing one or by creating a new one. It returns a
+ compound result with the HTX block and the position where new data must be
+ inserted (0 for a new block). If an error occurs or if there is no space
+ left, NULL is returned instead of a pointer on an HTX block.
+
+ - htx_find_offset() looks for the HTX block containing a specific offset,
+ starting at the HTX message's head. The function returns the found HTX
+ block and the position inside this block where the offset is. If the
+ offset is outside of the HTX message, NULL is returned.
+
+ - htx_defrag() defragments an HTX message. It removes unused blocks and
+ unwraps the payloads part. A temporary buffer is used to do so. This
+ function never fails. A referenced block may be provided. If so, the
+ corresponding new block is returned. Otherwise, NULL is returned.