summaryrefslogtreecommitdiffstats
path: root/doc/internals/api/layers.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
commitb46aad6df449445a9fc4aa7b32bd40005438e3f7 (patch)
tree751aa858ca01f35de800164516b298887382919d /doc/internals/api/layers.txt
parentInitial commit. (diff)
downloadhaproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.tar.xz
haproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.zip
Adding upstream version 2.9.5.upstream/2.9.5
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/internals/api/layers.txt')
-rw-r--r--doc/internals/api/layers.txt190
1 files changed, 190 insertions, 0 deletions
diff --git a/doc/internals/api/layers.txt b/doc/internals/api/layers.txt
new file mode 100644
index 0000000..b5c35f4
--- /dev/null
+++ b/doc/internals/api/layers.txt
@@ -0,0 +1,190 @@
+2022-05-27 - Stream layers in HAProxy 2.6
+
+
+1. Background
+
+There are streams at plenty of levels in haproxy, essentially due to the
+introduction of multiplexed protocols which provide high-level streams on top
+of low-level streams, themselves either based on stream-oriented protocols or
+datagram-oriented protocols.
+
+The refactoring of the appctx and muxes that allowed to drop a lot of duplicate
+code between 2.5 and 2.6-dev6 raised another concern with some entities like
+"conn_stream" that were not specific to connections anymore, "endpoints" that
+became entities on their own, and "targets" whose life had been extended to
+last all along a connection.
+
+It was time to rename all such legacy entities introduced in 1.8 and which had
+turned particularly confusing over time as their roles evolved.
+
+
+2. Naming principles
+
+The global renaming of some entities between streams and connections was
+articulated around several principles:
+
+ - avoid the confusing use of "context" in shared places. For example, the
+ endpoint's connection is in "ctx" and nothing makes it obvious that the
+ endpoint's context is a connection, especially when an applet is there.
+
+ - reserve relative nouns for pointers and not for types. "endpoint", just
+ like "owner" or "peer" is relative, but when accessed from a different
+ layer it starts to make no sense at all, or to make one believe it's
+ something else, particularly with void*.
+
+ - avoid too generic terms that have multiple meanings, or words that are
+ synonyms in a same place (e.g. "peer" and "remote", or "endpoint" and
+ "target"). If two synonyms are needed to designate two distinct entities,
+ there's probably a problem elsewhere, or the problem is poorly defined.
+
+ - make it clearer that all that is manipulated is related to streams. This
+ particularly important in sample fetch functions for example, which tend
+ to require low-level access and could be mislead in trying to follow the
+ wrong chain when trying to get information about a connection.
+
+ - use easily spellable short names that abbreviate unambiguously when used
+ together in adjacent contexts
+
+
+3. Current state as of 2.6
+
+- when a name is required to designate the lower block that starts at the mux
+ stream or the appctx, it is spoken of as a "stream endpoint", and abbreviated
+ "se". It's okay because while "endpoint" itself is relative, "stream
+ endpoint" unequivocally designates one extremity of a stream. If a type is
+ needed for this in the future (e.g. via obj_type), then the type "stendp"
+ may be used. Before 2.6-dev6 there was no name for this, it was known as
+ conn_stream->ctx.
+
+- the 2.6-dev6 cs_endpoint which preserves the state of a mux stream or an
+ appctx and abstracts them in front of a conn_stream becomes a "stream
+ endpoint descriptor", of type "sedesc" and often abbreviated "sd", "sed"
+ or "ed". Its "target" pointer became "se" as per the rule above. Before
+ 2.6-dev6, these elements were mixed with others inside conn_stream. From
+ the appctx it's called "sedesc" (few occurrences hence long name OK).
+
+- the conn_stream which is always attached to either a stream or a health check
+ and that is used to reach a mux or an applet becomes a "stream connector" of
+ type "stconn", generally abbreviated "sc". Its "endp" pointer becomes
+ "sedesc" as per the rule above, and that one has a back pointer "sc". The
+ stream uses "scf" and "scb" as the respective front and back pointers to the
+ stconns. Prior to 2.6-dev6, these parts were split between conn_stream and
+ stream_interface.
+
+- the sedesc's "ctx" which is solely used to store the connection as of now, is
+ renamed "conn" to void any doubt in the context of applets or even muxes. In
+ the future the connection should be attached to the "se" instead and this
+ pointer should disappear (or be recycled for anything else).
+
+The new 2.6 model looks like this:
+
+ +------------------------+
+ | stream or health check |
+ +------------------------+
+ ^ \ scf, scb
+ / \
+ | |
+ \ /
+ app \ v
+ +----------+
+ | stconn |
+ +----------+
+ ^ \ sedesc
+ / \
+ . . . . | . . . | . . . . . split point (retries etc)
+ \ /
+ sc \ v
+ +----------+
+ flags <--| sedesc | : sedesc :
+ +----------+ ... +----------+
+ conn / ^ \ se ^ \
+ +------------+ / / \ | \
+ | connection |<--' | | ... OR ... | |
+ +------------+ \ / \ |
+ mux| ^ |ctx sd \ v : sedesc \ v
+ | | | +----------------------+ \ # +----------+ svcctx
+ | | | | mux stream or appctx | | # | appctx |--.
+ | | | +----------------------+ | # +----------+ |
+ | | | ^ | / private # : : |
+ v | | | v > to the # +----------+ |
+ mux_ops | | +----------------+ \ mux # | svcctx |<-'
+ | +---->| mux connection | ) # +----------+
+ +------ +----------------+ / #
+
+Stream descriptors may exist in the following modes:
+ - .conn = NULL, .se = NULL : backend, not connection attempt yet
+ - .conn = NULL, .se = <appctx> : frontend or backend, applet
+ - .conn = <conn>, .se = NULL : backend, connection in progress
+ - .conn = <conn>, .se = <muxs> : frontend or backend, connected
+
+Notes:
+ - for historical reasons (connect, forced protocol upgrades, etc), during a
+ connection setup or a rule-based protocol upgrade, the connection's "ctx"
+ may temporarily point to the stconn
+
+
+4. Invariants and cardinalities
+
+Usually a stream is created from an existing stconn from a mux or some applets,
+but may also be allocated first by other applets schedulers. After stream_new()
+a stream always has exactly one stconn per side (scf, scb), each of which has
+one ->sedesc. Each side is initialized with either one or no stream endpoint
+attached to the descriptor.
+
+Both applets and a mux stream always have a stream endpoint descriptor. AS SUCH
+IT IS NEVER NECESSARY TO TEST FOR THE EXISTENCE OF THE SEDESC FROM ANY SIDE, IT
+ALWAYS EXISTS. This explains why as much as possible it's preferable to use the
+sedesc to access flags and statuses from any side, rather than bouncing via the
+stconn.
+
+An applet's app layer is always a stream, which means that there are always
+channels accessible above, and there is always an opposite stream connector and
+a stream endpoint descriptor. As such, it's always safe for an applet to access
+the other side using sc_opposite().
+
+When an outgoing connection is in the process of being established, the backend
+side sedesc has its ->conn pointer pointing to the pending connection, and no
+->se. Once the connection is established and a mux is chosen, it's attached to
+the ->se. If an applet is used instead of a mux, the appctx is attached to the
+sedesc's ->se and ->conn remains NULL.
+
+If either side wants to detach from the other, it must allocate a new virgin
+sedesc to replace the existing one, and leave the existing one to the endpoint,
+since it continues to describe the stream endpoint. The stconn keeps its state
+(modulo the updates related to the disconnection). The previous sedesc points
+to a NULL stconn. For example, disconnecting from a backend mux will leave the
+entities like this:
+
+ +------------------------+
+ | stream or health check |
+ +------------------------+
+ ^ \ scf, scb
+ / \
+ | |
+ \ /
+ app \ v
+ +----------+
+ | stconn |
+ +----------+
+ ^ \ sedesc
+ / \
+ NULL | |
+ ^ \ /
+ sc | / sc \ v
+ +----------+ / +----------+
+ flags <--| sedesc1 | . . . . . | sedesc2 |--> flags
+ +----------+ / +----------+
+ conn / ^ \ se / conn / \ se
+ +------------+ / / \ | |
+ | connection |<--' | | v v
+ +------------+ \ / NULL NULL
+ mux| ^ |ctx sd \ v
+ | | | +----------------------+
+ | | | | mux stream or appctx |
+ | | | +----------------------+
+ | | | ^ |
+ v | | | v
+ mux_ops | | +----------------+
+ | +---->| mux connection |
+ +------ +----------------+
+