diff options
Diffstat (limited to 'reg-tests/server')
| -rw-r--r-- | reg-tests/server/cli_add_check_server.vtc | 161 | ||||
| -rw-r--r-- | reg-tests/server/cli_add_server.vtc | 87 | ||||
| -rw-r--r-- | reg-tests/server/cli_add_ssl_server.vtc | 110 | ||||
| -rw-r--r-- | reg-tests/server/cli_add_track_server.vtc | 242 | ||||
| -rw-r--r-- | reg-tests/server/cli_delete_dynamic_server.vtc | 94 | ||||
| -rw-r--r-- | reg-tests/server/cli_delete_server.vtc | 60 | ||||
| -rw-r--r-- | reg-tests/server/cli_set_fqdn.vtc | 57 | ||||
| -rw-r--r-- | reg-tests/server/cli_set_ssl.vtc | 60 | ||||
| l--------- | reg-tests/server/common.pem | 1 | ||||
| -rw-r--r-- | reg-tests/server/get_srv_stats.lua | 11 |
10 files changed, 883 insertions, 0 deletions
diff --git a/reg-tests/server/cli_add_check_server.vtc b/reg-tests/server/cli_add_check_server.vtc new file mode 100644 index 0000000..c63710c --- /dev/null +++ b/reg-tests/server/cli_add_check_server.vtc @@ -0,0 +1,161 @@ +varnishtest "Add/Delete server via cli with check support" + +feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev3)'" +feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)'" +feature ignore_unknown_macro + +barrier b1 cond 2 -cyclic +barrier b2 cond 2 -cyclic + +server s1 { + rxreq + txresp +} -start + +server s2 { +} -start + +# used for agent checks +server s3 { + recv 5 + send "ready up\n" + barrier b2 sync +} -start + +syslog S1 -level notice { + recv + expect ~ ".*Server be1/s1 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be1/s1 succeeded.+reason: Layer7 check passed, code: 200, check duration: [[:digit:]]+ms.+status: 1/1 UP" + + barrier b1 sync + + recv + expect ~ ".*Server be1/s2 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be1/s2 failed.+reason: Layer7 timeout, check duration: [[:digit:]]+ms.+status: 0/1 DOWN" + + barrier b1 sync + + recv + expect ~ ".*Server be1/s2 was DOWN and now enters maintenance." + + recv + expect ~ ".*Server be1/s3 is UP/READY \\(leaving forced maintenance\\)." + + recv + expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Agent check for server be1/s3 succeeded.+reason: Layer7 check passed, code: 0, info: \"via agent : up\", check duration: [[:digit:]]+ms.+status: 1/1 UP" + + barrier b1 sync + barrier b2 sync + + recv + expect ~ ".*Server be1/s4 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "Health check for server be1/s4 failed" + + barrier b1 sync + + recv + expect ~ ".*Server be1/s5 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "Health check for server be1/s5 succeeded." +} -start + +haproxy h1 -conf { + global + stats socket "${tmpdir}/h1/stats" level admin + + backend be1 + option log-health-checks + option httpchk GET / + log ${S1_addr}:${S1_port} daemon + + frontend fe-proxy + mode http + bind "fd@${hapsrv}" accept-proxy + http-request return status 200 +} -start + +# check on a functional server +haproxy h1 -cli { + send "add server be1/s1 ${s1_addr}:${s1_port} check inter 200ms rise 1 fall 1" + expect ~ "New server registered." + + send "enable server be1/s1" + expect ~ ".*" + send "enable health be1/s1" + expect ~ ".*" + + barrier b1 sync + + send "disable server be1/s1" + expect ~ ".*" + + send "del server be1/s1" + expect ~ "Server deleted." +} + +server s2 -break + +# check on a disabled server +haproxy h1 -cli { + send "add server be1/s2 ${s2_addr}:${s2_port} check inter 200ms rise 1 fall 1" + expect ~ "New server registered." + + send "enable server be1/s2" + expect ~ ".*" + send "enable health be1/s2" + expect ~ ".*" + + barrier b1 sync + + send "disable server be1/s2" + expect ~ ".*" + + send "del server be1/s2" + expect ~ "Server deleted." +} + +# agent check +haproxy h1 -cli { + send "add server be1/s3 ${s1_addr}:${s1_port} agent-check agent-addr ${s3_addr} agent-port ${s3_port} agent-send 'hello' agent-inter 200ms rise 1 fall 1" + expect ~ "New server registered." + + send "enable agent be1/s3" + expect ~ ".*" + + barrier b1 sync + + send "disable agent be1/s3; disable server be1/s3" + expect ~ ".*" + + send "del server be1/s3" + expect ~ "Server deleted." +} + +# check PROXY protocol interaction with checks +haproxy h1 -cli { + # no explicit check-send-proxy + # The health check should failed. + send "add server be1/s4 ${h1_hapsrv_addr}:${h1_hapsrv_port} send-proxy check rise 1 fall 1" + expect ~ "New server registered." + + send "enable server be1/s4" + expect ~ ".*" + send "enable health be1/s4" + expect ~ ".*" + + barrier b1 sync + + # explicit check-send-proxy : health check should succeeded + send "add server be1/s5 ${h1_hapsrv_addr}:${h1_hapsrv_port} send-proxy check rise 1 fall 1 check-send-proxy" + expect ~ "New server registered." + + send "enable server be1/s5" + expect ~ ".*" + send "enable health be1/s5" + expect ~ ".*" +} + +syslog S1 -wait diff --git a/reg-tests/server/cli_add_server.vtc b/reg-tests/server/cli_add_server.vtc new file mode 100644 index 0000000..8c29305 --- /dev/null +++ b/reg-tests/server/cli_add_server.vtc @@ -0,0 +1,87 @@ +varnishtest "Add server via cli" + +feature ignore_unknown_macro + +#REQUIRE_VERSION=2.4 + +server s1 { + rxreq + txresp +} -start + +haproxy h1 -conf { + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + frontend fe + bind "fd@${feS}" + default_backend test + + backend test + balance random + + backend other + balance static-rr + + backend other2 + balance random + mode tcp +} -start + +client c1 -connect ${h1_feS_sock} { + txreq + rxresp + expect resp.status == 503 +} -run + +haproxy h1 -cli { + # non existent backend + send "add server foo/s1 ${s1_addr}:${s1_port}" + expect ~ "No such backend." + + # missing address + send "add server test/s1" + expect ~ "'server' expects <name> and <addr>\\[:<port>\\] as arguments." + + # invalid load-balancing algo + send "add server other/s1 ${s1_addr}:${s1_port}" + expect ~ "Backend must use a dynamic load balancing to support dynamic servers." + + # invalid mux proto + send "add server other2/s1 ${s1_addr}:${s1_port} proto h2" + expect ~ "MUX protocol is not usable for server." + + # valid command + send "add server test/s1 ${s1_addr}:${s1_port}" + expect ~ "New server registered." + + # duplicate server + send "add server test/s1 ${s1_addr}:${s1_port}" + expect ~ "Already exists a server with the same name in backend." + + # valid command + # specify the proto, it should be accepted for this backend + send "add server test/s2 ${s1_addr}:${s1_port} proto h2" + expect ~ "New server registered." +} + +# dynamic servers are created on MAINT mode and should not be available at first +client c2 -connect ${h1_feS_sock} { + txreq + rxresp + expect resp.status == 503 +} -run + +haproxy h1 -cli { + send "enable server test/s1" + expect ~ ".*" +} + +client c3 -connect ${h1_feS_sock} { + txreq + rxresp + expect resp.status == 200 +} -run diff --git a/reg-tests/server/cli_add_ssl_server.vtc b/reg-tests/server/cli_add_ssl_server.vtc new file mode 100644 index 0000000..48faee1 --- /dev/null +++ b/reg-tests/server/cli_add_ssl_server.vtc @@ -0,0 +1,110 @@ +varnishtest "Add server via cli with SSL activated" + +feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev0)'" +feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)'" +feature cmd "command -v socat" +feature ignore_unknown_macro + +barrier b1 cond 2 -cyclic + +syslog S1 -level notice { + recv + expect ~ ".*Server li-ssl/s1 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ ".*Server li-ssl/s2 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "Health check for server li-ssl/s2 failed" + + barrier b1 sync + + recv + expect ~ ".*Server li-ssl/s3 is UP/READY \\(leaving forced maintenance\\)." + recv + expect ~ "Health check for server li-ssl/s3 succeeded." +} -start + +haproxy h1 -conf { + global + stats socket "${tmpdir}/h1/stats" level admin + + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + option log-health-checks + option httpchk GET / + + # proxy to attach a ssl server + listen li-ssl + bind "fd@${feSsl}" + balance random + log ${S1_addr}:${S1_port} daemon + + # frontend used to respond to ssl connection + frontend fe-ssl-term + bind "fd@${feSslTerm}" ssl crt ${testdir}/common.pem + http-request return status 200 +} -start + +### SSL SUPPORT +# 1. first create a ca-file using CLI +# 2. create an SSL server and use it + +client c1 -connect ${h1_feSsl_sock} { + txreq + rxresp + expect resp.status == 503 +} -run + +shell { + echo "new ssl ca-file common.pem" | socat "${tmpdir}/h1/stats" - + printf "set ssl ca-file common.pem <<\n$(cat ${testdir}/common.pem)\n\n" | socat "${tmpdir}/h1/stats" - + echo "commit ssl ca-file common.pem" | socat "${tmpdir}/h1/stats" - +} -run + +haproxy h1 -cli { + send "show ssl ca-file common.pem" + expect ~ ".*SHA1 FingerPrint: DF3B6E847A7BF83DFAAFCFEC65EE9BC36230D3EA" +} + +haproxy h1 -cli { + # non existent backend + send "add server li-ssl/s1 ${h1_feSslTerm_addr}:${h1_feSslTerm_port} ssl ca-file common.pem verify none" + expect ~ "New server registered." + + send "enable server li-ssl/s1" + expect ~ ".*" +} + +client c2 -connect ${h1_feSsl_sock} { + txreq + rxresp + expect resp.status == 200 +} -run + +# test interaction between SSL and checks for dynamic servers +haproxy h1 -cli { + # no explicit check-ssl + # The health check should failed. + send "add server li-ssl/s2 ${h1_feSslTerm_addr}:${h1_feSslTerm_port} ssl verify none check" + expect ~ "New server registered." + + send "enable server li-ssl/s2" + expect ~ ".*" + send "enable health li-ssl/s2" + expect ~ ".*" + + barrier b1 sync + + # explicit check-ssl : health check should succeeded + send "add server li-ssl/s3 ${h1_feSslTerm_addr}:${h1_feSslTerm_port} ssl verify none check check-ssl" + expect ~ "New server registered." + + send "enable server li-ssl/s3" + expect ~ ".*" + send "enable health li-ssl/s3" + expect ~ ".*" +} + +syslog S1 -wait diff --git a/reg-tests/server/cli_add_track_server.vtc b/reg-tests/server/cli_add_track_server.vtc new file mode 100644 index 0000000..318f236 --- /dev/null +++ b/reg-tests/server/cli_add_track_server.vtc @@ -0,0 +1,242 @@ +varnishtest "Add/Delete server via cli with track support" + +feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev0)'" +feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)'" +feature ignore_unknown_macro + + +# just use to provide s1_{addr,port} macros +server s1 { +} + + +# scenario 1 +# -> 3 dynamic servers, delete the first one +syslog S1 { + recv notice + expect ~ "Server be1/s1 is UP/READY" + recv notice + expect ~ "Server be1/s2 is UP/READY" + recv notice + expect ~ "Server be1/s3 is UP/READY" + + recv alert + expect ~ "Server be1/srv is going DOWN for maintenance." + recv alert + expect ~ "Server be1/s3 is going DOWN for maintenance." + recv alert + expect ~ "Server be1/s2 is going DOWN for maintenance." + recv alert + expect ~ "Server be1/s1 is going DOWN for maintenance." + + recv notice + expect ~ "Server be1/srv is UP/READY" + recv notice + expect ~ "Server be1/s3 is UP/READY" + recv notice + expect ~ "Server be1/s2 is UP/READY" +} -start + +# scenario 2 +# -> 3 dynamic servers, delete the middle one +syslog S2 { + recv notice + expect ~ "Server be2/s1 is UP/READY" + recv notice + expect ~ "Server be2/s2 is UP/READY" + recv notice + expect ~ "Server be2/s3 is UP/READY" + + recv alert + expect ~ "Server be2/srv is going DOWN for maintenance." + recv alert + expect ~ "Server be2/s3 is going DOWN for maintenance." + recv alert + expect ~ "Server be2/s2 is going DOWN for maintenance." + recv alert + expect ~ "Server be2/s1 is going DOWN for maintenance." + + recv notice + expect ~ "Server be2/srv is UP/READY" + recv notice + expect ~ "Server be2/s3 is UP/READY" + recv notice + expect ~ "Server be2/s1 is UP/READY" +} -start + +# scenario 3 +# -> 3 dynamic servers, delete all of them +syslog S3 { + recv notice + expect ~ "Server be3/s1 is UP/READY" + recv notice + expect ~ "Server be3/s2 is UP/READY" + recv notice + expect ~ "Server be3/s3 is UP/READY" + + recv alert + expect ~ "Server be3/s1 is going DOWN for maintenance." + recv alert + expect ~ "Server be3/s3 is going DOWN for maintenance." + recv alert + expect ~ "Server be3/s2 is going DOWN for maintenance." + + recv alert + expect ~ "Server be3/srv is going DOWN for maintenance." + + recv notice + expect ~ "Server be3/srv is UP/READY" +} -start + + +haproxy h1 -conf { + global + stats socket "${tmpdir}/h1/stats" level admin + + backend be_check + server srv_check ${s1_addr}:${s1_port} check + server srv_no_check ${s1_addr}:${s1_port} + + backend be1 + log ${S1_addr}:${S1_port} daemon + server srv ${s1_addr}:${s1_port} check + + backend be2 + log ${S2_addr}:${S2_port} daemon + server srv ${s1_addr}:${s1_port} check + + backend be3 + log ${S3_addr}:${S3_port} daemon + server srv ${s1_addr}:${s1_port} check +} -start + + +### +# check the support of the 'track' keyword on 'add server' CLI command. +# rejection must happen if track on a non-checked or a dynamic server +### +haproxy h1 -cli { + # invalid command: track on a non-checked server + send "add server be_check/s1 ${s1_addr}:${s1_port} track be_check/srv_no_check" + expect ~ "unable to use be_check/srv_no_check for tracking as it does not have any check nor agent enabled." + + # valid track usage + send "add server be_check/s1 ${s1_addr}:${s1_port} track be_check/srv_check" + expect ~ "New server registered." + + # invalid command: track on a dynamic server + send "add server be_check/s3 ${s1_addr}:${s1_port} track be_check/s1" + expect ~ "unable to use be_check/s1 for tracking as it is a dynamic server." +} + +### +# scenario 1 +# +# Add 3 dynamic servers with tracking on be1/srv +# Disable be1/srv, S1 should report all servers DOWN +# Delete the first dynamic server, enable be1/srv, S1 should report s1 and s3 UP +#### +haproxy h1 -cli { + send "add server be1/s1 ${s1_addr}:${s1_port} track be1/srv" + expect ~ "New server registered." + send "enable server be1/s1" + expect ~ ".*" + + send "add server be1/s2 ${s1_addr}:${s1_port} track be1/srv" + expect ~ "New server registered." + send "enable server be1/s2" + expect ~ ".*" + + send "add server be1/s3 ${s1_addr}:${s1_port} track be1/srv" + expect ~ "New server registered." + send "enable server be1/s3" + expect ~ ".*" + + send "disable server be1/srv" + expect ~ ".*" + + send "del server be1/s1" + expect ~ "Server deleted." + + send "enable server be1/srv" + expect ~ ".*" +} + +### +# scenario 2 +# +# Add 3 dynamic servers with tracking on be2/srv +# Disable be2/srv, S3 should report all servers DOWN +# Delete the second dynamic server, enable be2/srv, S2 should report s2 and s3 UP +#### +haproxy h1 -cli { + send "add server be2/s1 ${s1_addr}:${s1_port} track be2/srv" + expect ~ "New server registered." + send "enable server be2/s1" + expect ~ ".*" + + send "add server be2/s2 ${s1_addr}:${s1_port} track be2/srv" + expect ~ "New server registered." + send "enable server be2/s2" + expect ~ ".*" + + send "add server be2/s3 ${s1_addr}:${s1_port} track be2/srv" + expect ~ "New server registered." + send "enable server be2/s3" + expect ~ ".*" + + send "disable server be2/srv" + expect ~ ".*" + + send "del server be2/s2" + expect ~ "Server deleted." + + send "enable server be2/srv" + expect ~ ".*" +} + +### +# scenario 3 +# +# Add 3 dynamic servers with tracking on be3/srv +# Delete all of them, disable/enable be3/srv, only be3/srv should be reported +# as DOWN/UP. +#### +haproxy h1 -cli { + # create server 1, track on be3/srv + send "add server be3/s1 ${s1_addr}:${s1_port} track be3/srv" + expect ~ "New server registered." + send "enable server be3/s1" + expect ~ ".*" + + # create server 2, track on be3/srv + send "add server be3/s2 ${s1_addr}:${s1_port} track be3/srv" + expect ~ "New server registered." + send "enable server be3/s2" + expect ~ ".*" + + # create server 3, track on be3/srv + send "add server be3/s3 ${s1_addr}:${s1_port} track be3/srv" + expect ~ "New server registered." + send "enable server be3/s3" + expect ~ ".*" + + # delete all dynamic servers + send "disable server be3/s1; del server be3/s1" + expect ~ "Server deleted." + send "disable server be3/s3; del server be3/s3" + expect ~ "Server deleted." + send "disable server be3/s2; del server be3/s2" + expect ~ "Server deleted." + + # disable / enable the static server + send "disable server be3/srv" + expect ~ ".*" + send "enable server be3/srv" + expect ~ ".*" +} + + +syslog S1 -wait +syslog S2 -wait +syslog S3 -wait diff --git a/reg-tests/server/cli_delete_dynamic_server.vtc b/reg-tests/server/cli_delete_dynamic_server.vtc new file mode 100644 index 0000000..e667641 --- /dev/null +++ b/reg-tests/server/cli_delete_dynamic_server.vtc @@ -0,0 +1,94 @@ +# This script is to test the proper behavior with dynamic servers insertion and +# deletion, in particular with the load-balancing of requests. +# +varnishtest "Delete server via cli" + +feature ignore_unknown_macro + +#REQUIRE_VERSION=2.4 + +# static server +server s1 -repeat 3 { + rxreq + txresp \ + -body "resp from s1" +} -start + +# use as a dynamic server, added then deleted via CLI +server s2 -repeat 3 { + rxreq + txresp \ + -body "resp from s2" +} -start + +haproxy h1 -conf { + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + frontend fe + bind "fd@${feS}" + default_backend test + + backend test + server s1 ${s1_addr}:${s1_port} +} -start + +# add a new dynamic server to be able to delete it then +haproxy h1 -cli { + # add a dynamic server and enable it + send "add server test/s2 ${s2_addr}:${s2_port}" + expect ~ "New server registered." + + send "enable server test/s2" + expect ~ ".*" +} + +haproxy h1 -cli { + # non existent backend + send "del server foo/s1" + expect ~ "No such backend." + + # non existent server + send "del server test/other" + expect ~ "No such server." +} + +# first check that both servers are active +client c1 -connect ${h1_feS_sock} { + txreq + rxresp + expect resp.body == "resp from s1" + + txreq + rxresp + expect resp.body == "resp from s2" +} -run + +# delete the dynamic server +haproxy h1 -cli { + # server not in maintenance mode + send "del server test/s2" + expect ~ "Only servers in maintenance mode can be deleted." + + send "disable server test/s2" + expect ~ ".*" + + # valid command + send "del server test/s2" + expect ~ "Server deleted." +} + +# now check that only the first server is used +client c2 -connect ${h1_feS_sock} { + txreq + rxresp + expect resp.body == "resp from s1" + + txreq + rxresp + expect resp.body == "resp from s1" +} -run + diff --git a/reg-tests/server/cli_delete_server.vtc b/reg-tests/server/cli_delete_server.vtc new file mode 100644 index 0000000..61d241c --- /dev/null +++ b/reg-tests/server/cli_delete_server.vtc @@ -0,0 +1,60 @@ +# This script is to test the ability to remove servers, unless they are +# referenced by some elements from the configuration. +# +varnishtest "Delete server via cli" + +feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev0)'" +feature ignore_unknown_macro + +haproxy h1 -conf { + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + frontend fe + bind "fd@${feS}" + acl s1_full srv_sess_rate(test/s1) gt 50 + default_backend test + + backend test + use-server s3 unless { always_false } + server s1 ${s1_addr}:${s1_port} # referenced in ACL + server s2 ${s1_addr}:${s1_port} check # referenced in track + server s3 ${s1_addr}:${s1_port} track s2 # referenced in use-server + server s4 ${s1_addr}:${s1_port} # removable server +} -start + +haproxy h1 -cli { + # non existent backend + send "del server foo/s1" + expect ~ "No such backend." + + # non existent server + send "del server test/other" + expect ~ "No such server." + + # server referenced in ACL + send "del server test/s1" + expect ~ "This server cannot be removed at runtime due to other configuration elements pointing to it." + + # tracked server + send "del server test/s2" + expect ~ "This server cannot be removed at runtime due to other configuration elements pointing to it." + + # tracked server + send "del server test/s3" + expect ~ "This server cannot be removed at runtime due to other configuration elements pointing to it." + + # server in running mode + send "del server test/s4" + expect ~ "Only servers in maintenance mode can be deleted." + + send "disable server test/s4" + expect ~ ".*" + + # valid command + send "del server test/s4" + expect ~ "Server deleted." +} diff --git a/reg-tests/server/cli_set_fqdn.vtc b/reg-tests/server/cli_set_fqdn.vtc new file mode 100644 index 0000000..f82674f --- /dev/null +++ b/reg-tests/server/cli_set_fqdn.vtc @@ -0,0 +1,57 @@ +varnishtest "Set server FQDN via CLI crash" + +feature ignore_unknown_macro + +# for "set server <srv> fqdn" +#REGTEST_TYPE=bug + +# Do nothing. Is there only to create s1_* macros +server s1 { +} -start + +haproxy h1 -conf { + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + frontend myfrontend + bind "fd@${my_fe}" + default_backend test + + backend test + server www1 ${s1_addr}:${s1_port} +} -start + +haproxy h2 -conf { + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + resolvers systemdns + parse-resolv-conf + + frontend myfrontend + bind "fd@${my_fe}" + default_backend test + + backend test + server www1 ${s1_addr}:${s1_port} resolvers systemdns resolve-prefer ipv4 +} -start + +haproxy h1 -cli { + send "set server test/www1 fqdn foo.fqdn" + expect ~ "set server <b>/<s> fqdn failed because no resolution is configured." + send "show servers state test" + expect ~ "test 1 www1 ${s1_addr} .* - ${s1_port}" +} -wait + +haproxy h2 -cli { + send "set server test/www1 fqdn localhost" + expect ~ "test/www1 changed its FQDN from \\(null\\) to localhost" + send "show servers state test" + expect ~ "test 1 www1 127.0.0.1 .* localhost" +} -wait diff --git a/reg-tests/server/cli_set_ssl.vtc b/reg-tests/server/cli_set_ssl.vtc new file mode 100644 index 0000000..fa6fe68 --- /dev/null +++ b/reg-tests/server/cli_set_ssl.vtc @@ -0,0 +1,60 @@ +varnishtest "Set server ssl via CLI" + +feature ignore_unknown_macro + +# for "set server <srv> ssl" +#REQUIRE_VERSION=2.4 +#REGTEST_TYPE=devel +#REQUIRE_OPTIONS=OPENSSL + +# Do nothing. Is there only to create s1_* macros +server s1 { +} -start + +haproxy h1 -conf { + global + ssl-server-verify none + + defaults + mode http + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + frontend myfrontend + bind "fd@${my_fe}" + default_backend test0 + + backend test0 + server www0 ${s1_addr}:${s1_port} no-ssl + default-server ssl + server www1 ${s1_addr}:${s1_port} no-ssl + + backend test1 + server www0 ${s1_addr}:${s1_port} no-ssl +} -start + +haproxy h1 -cli { + # supported case + send "show servers state test0" + expect ~ "test0 2 www1 ${s1_addr} .* - ${s1_port} - -1" + send "set server test0/www1 ssl on" + expect ~ "server ssl setting updated" + send "show servers state test0" + expect ~ "test0 2 www1 ${s1_addr} .* - ${s1_port} - 1" + send "set server test0/www1 ssl off" + expect ~ "server ssl setting updated" + send "show servers state test0" + expect ~ "test0 2 www1 ${s1_addr} .* - ${s1_port} - 0" + + # unsupported cases + send "show servers state test0" + expect ~ "test0 1 www0 ${s1_addr} .* - ${s1_port} - -1" + send "set server test0/www0 ssl on" + expect ~ "'set server <srv> ssl' cannot be set" + + send "show servers state test1" + expect ~ "test1 1 www0 ${s1_addr} .* - ${s1_port} - -1" + send "set server test1/www0 ssl on" + expect ~ "'set server <srv> ssl' cannot be set" +} -wait diff --git a/reg-tests/server/common.pem b/reg-tests/server/common.pem new file mode 120000 index 0000000..a4433d5 --- /dev/null +++ b/reg-tests/server/common.pem @@ -0,0 +1 @@ +../ssl/common.pem
\ No newline at end of file diff --git a/reg-tests/server/get_srv_stats.lua b/reg-tests/server/get_srv_stats.lua new file mode 100644 index 0000000..105b954 --- /dev/null +++ b/reg-tests/server/get_srv_stats.lua @@ -0,0 +1,11 @@ +local function lua_get_srv_stats(txn, name) + for _, backend in pairs(core.backends) do + for _, server in pairs(backend.servers) do + if server.name == name then + return server:get_stats() + end + end + end +end + +core.register_fetches('get_srv_stats', lua_get_srv_stats) |