diff options
Diffstat (limited to 'reg-tests/ssl/set_ssl_cafile.vtc')
| -rw-r--r-- | reg-tests/ssl/set_ssl_cafile.vtc | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/reg-tests/ssl/set_ssl_cafile.vtc b/reg-tests/ssl/set_ssl_cafile.vtc new file mode 100644 index 0000000..3881a42 --- /dev/null +++ b/reg-tests/ssl/set_ssl_cafile.vtc @@ -0,0 +1,167 @@ +#REGTEST_TYPE=devel + +# This reg-test uses the "set ssl ca-file" command to update a CA file over the CLI. +# It also tests the "abort ssl ca-file" and "show ssl ca-file" commands. +# +# It is based on two CA certificates, set_cafile_interCA1.crt and set_cafile_interCA2.crt, +# and a client certificate that was signed with set_cafile_interCA1.crt (set_cafile_client.pem) +# and a server certificate that was signed with set_cafile_interCA2.crt (set_cafile_server.pem). +# The CA files used by the client and the server will be updated through the CLI until a +# proper connection can be established between them. +# +# It requires socat to upload the certificate +# +# If this test does not work anymore: +# - Check that you have socat + +varnishtest "Test the 'set ssl ca-file' feature of the CLI" +feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev0)'" +feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)' && !ssllib_name_startswith(wolfSSL)'" +feature cmd "command -v socat" +feature ignore_unknown_macro + +server s1 -repeat 4 { + rxreq + txresp +} -start + +haproxy h1 -conf { + global + tune.ssl.default-dh-param 2048 + tune.ssl.capture-buffer-size 1 + stats socket "${tmpdir}/h1/stats" level admin + + defaults + mode http + option httplog + retries 0 + log stderr local0 debug err + option logasap + timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" + timeout client "${HAPROXY_TEST_TIMEOUT-5s}" + timeout server "${HAPROXY_TEST_TIMEOUT-5s}" + + listen clear-lst + bind "fd@${clearlst}" + # dummy bind used to test a change when the same crt is used as server and bind + bind "fd@${foobarlst}" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA1.crt verify none + server s1 "${tmpdir}/ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA1.crt verify none + + listen clear-verified-lst + bind "fd@${clearverifiedlst}" + server s1 "${tmpdir}/ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA1.crt verify required + + listen ssl-lst + # crt: certificate of the server + # ca-file: CA used for client authentication request + bind "${tmpdir}/ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA2.crt verify required crt-ignore-err all + http-response add-header X-SSL-Client-Verify %[ssl_c_verify] + server s1 ${s1_addr}:${s1_port} +} -start + + +# Test the "show ssl ca-file" command +haproxy h1 -cli { + send "show ssl ca-file" + expect ~ ".*${testdir}/set_cafile_interCA1.crt - 1 certificate.*" + send "show ssl ca-file" + expect ~ ".*${testdir}/set_cafile_interCA2.crt - 1 certificate.*" + + send "show ssl ca-file ${testdir}/set_cafile_interCA2.crt" + expect ~ ".*SHA1 FingerPrint: 3D3D1D10AD74A8135F05A818E10E5FA91433954D" +} + + +# This first connection should fail because the client's certificate was signed with the +# set_cafile_interCA1.crt certificate which is not known by the backend. +client c1 -connect ${h1_clearlst_sock} { + txreq + rxresp + expect resp.status == 200 + # unable to verify the client certificate + expect resp.http.X-SSL-Client-Verify ~ "20|21" +} -run + +# Set a new ca-file without committing it and check that the new ca-file is not taken into account +shell { + printf "set ssl ca-file ${testdir}/set_cafile_interCA2.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" - +} + +# Test the "show ssl ca-file" command +# The transaction should be mentioned in the list +haproxy h1 -cli { + send "show ssl ca-file" + expect ~ "\\*${testdir}/set_cafile_interCA2.crt - 1 certificate.*" + +# The original CA file did not change + send "show ssl ca-file ${testdir}/set_cafile_interCA2.crt" + expect ~ ".*SHA1 FingerPrint: 3D3D1D10AD74A8135F05A818E10E5FA91433954D" + +# Only the current transaction displays a new certificate + send "show ssl ca-file *${testdir}/set_cafile_interCA2.crt" + expect ~ ".*SHA1 FingerPrint: 4FFF535278883264693CEA72C4FAD13F995D0098" +} + +# This connection should still fail for the same reasons as previously +client c1 -connect ${h1_clearlst_sock} { + txreq + rxresp + expect resp.status == 200 + # unable to verify the client certificate + expect resp.http.X-SSL-Client-Verify ~ "20|21" +} -run + +haproxy h1 -cli { + send "abort ssl ca-file ${testdir}/set_cafile_interCA2.crt" + expect ~ "Transaction aborted for certificate '${testdir}/set_cafile_interCA2.crt'!" + send "commit ssl ca-file ${testdir}/set_cafile_interCA2.crt" + expect ~ "No ongoing transaction!" +} + + +# Update the bind line's ca-file in order to accept the client certificate +shell { + printf "set ssl ca-file ${testdir}/set_cafile_interCA2.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" - + echo "commit ssl ca-file ${testdir}/set_cafile_interCA2.crt" | socat "${tmpdir}/h1/stats" - +} + + +# The backend's certificate can't be verified by the frontend because it was signed with +# the set_cafile_interCA2.crt certificate. +client c1 -connect ${h1_clearverifiedlst_sock} { + txreq + rxresp + expect resp.status == 503 +} -run + + +# Update the server line's ca-file. The server certificate should now be accepted by +# the frontend. We replace the single CA by a list of CAs that includes the correct one. +shell { + printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" - + printf "add ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA2.crt)\n\n" | socat "${tmpdir}/h1/stats" - + printf "add ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" - + echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" - +} + +# Test the "show ssl ca-file" with a certificate index +haproxy h1 -cli { + send "show ssl ca-file" + expect ~ ".*${testdir}/set_cafile_interCA1.crt - 3 certificate.*" + + send "show ssl ca-file ${testdir}/set_cafile_interCA1.crt:1" + expect ~ ".*SHA1 FingerPrint: 4FFF535278883264693CEA72C4FAD13F995D0098" + + send "show ssl ca-file ${testdir}/set_cafile_interCA1.crt:2" + expect !~ ".*SHA1 FingerPrint: 4FFF535278883264693CEA72C4FAD13F995D0098" + send "show ssl ca-file ${testdir}/set_cafile_interCA1.crt:2" + expect ~ ".*SHA1 FingerPrint: 3D3D1D10AD74A8135F05A818E10E5FA91433954D" +} + +client c1 -connect ${h1_clearverifiedlst_sock} { + txreq + rxresp + expect resp.status == 200 + # there should be no error on the backend side but one on the frontend side + expect resp.http.X-SSL-Client-Verify == 0 +} -run |