From d2a536e458f4cd7ffeadfe302c23bbfe263b0053 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 3 Jun 2024 07:11:10 +0200 Subject: Merging upstream version 3.0.0. Signed-off-by: Daniel Baumann --- Makefile | 486 +++++++++++++++++++++++++++++++++------------------------------ 1 file changed, 254 insertions(+), 232 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 7b546a5..cefee0f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # This GNU Makefile supports different OS and CPU combinations. # # You should use it this way : -# [g]make TARGET=os [ARCH=arch] [CPU=cpu] USE_xxx=1 ... +# [g]make TARGET=os [CFLAGS=...] USE_xxx=1 ... # # When in doubt, invoke help, possibly with a known target : # [g]make help @@ -75,13 +75,16 @@ # Variables useful for packagers : # CC is set to "cc" by default and is used for compilation only. # LD is set to "cc" by default and is used for linking only. -# ARCH may be useful to force build of 32-bit binary on 64-bit systems -# CFLAGS is automatically set for the specified CPU and may be overridden. +# OPT_CFLAGS sets the default optimization level (-O2). +# CFLAGS may be used to append any flags for the C compiler. # LDFLAGS is automatically set to -g and may be overridden. +# ARCH_FLAGS for flags common to both CC and LD. Defaults to -g. # DEP may be cleared to ignore changes to include files during development -# SMALL_OPTS may be used to specify some options to shrink memory usage. # DEBUG may be used to set some internal debugging options. # ERR may be set to non-empty to pass -Werror to the compiler +# FAILFAST may be set to non-empty to pass -Wfatal-errors to the compiler +# WARN_CFLAGS overrides the default set of enabled warning options +# NOWARN_CFLAGS overrides the default set of disabled warning options # ADDINC may be used to complete the include path in the form -Ipath. # ADDLIB may be used to complete the library list in the form -Lpath -llib. # DEFINE may be used to specify any additional define, which will be reported @@ -152,27 +155,45 @@ DOCDIR = $(PREFIX)/doc/haproxy # custom TARGET = -#### TARGET CPU -# Use CPU= to optimize for a particular CPU, among the following -# list : -# generic, native, i586, i686, ultrasparc, power8, power9, custom, -# a53, a72, armv81, armv8-auto -CPU = generic - -#### Architecture, used when not building for native architecture -# Use ARCH= to force build for a specific architecture. Known -# architectures will lead to "-m32" or "-m64" being added to CFLAGS and -# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets. -# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood. +#### No longer used +CPU = +ifneq ($(CPU),) +ifneq ($(CPU),generic) +$(warning Warning: the "CPU" variable was forced to "$(CPU)" but is no longer \ + used and will be ignored. For native builds, modern compilers generally \ + prefer that the string "-march=native" is passed in CPU_CFLAGS or CFLAGS. \ + For other CPU-specific options, please read suggestions in the INSTALL file.) +endif +endif + +#### No longer used ARCH = +ifneq ($(ARCH),) +$(warning Warning: the "ARCH" variable was forced to "$(ARCH)" but is no \ + longer used and will be ignored. Please check the INSTALL file for other \ + options, but usually in order to pass arch-specific options, ARCH_FLAGS, \ + CFLAGS or LDFLAGS are preferred.) +endif #### Toolchain options. CC = cc LD = $(CC) -#### Debug flags (typically "-g"). -# Those flags only feed CFLAGS so it is not mandatory to use this form. -DEBUG_CFLAGS = -g +#### Default optimizations +# Those are integrated early in the list of CFLAGS, and may be overridden by +# other CFLAGS options if needed. +OPT_CFLAGS = -O2 + +#### No longer used +DEBUG_CFLAGS = +ifneq ($(DEBUG_CFLAGS),) +$(warning Warning: DEBUG_CFLAGS was forced to "$(DEBUG_CFLAGS)" but is no \ + longer used and will be ignored. If you have ported this build setting from \ + and older version, it is likely that you just want to pass these options \ + to the CFLAGS variable. If you are passing some debugging-related options \ + such as -g/-ggdb3/-pg etc, they can now be passed in ARCH_FLAGS at once for \ + both the compilation and linking stages.) +endif #### Add -Werror when set to non-empty ERR = @@ -181,42 +202,55 @@ ERR = REG_TEST_FILES = REG_TEST_SCRIPT=./scripts/run-regtests.sh -#### Compiler-specific flags that may be used to disable some negative over- -# optimization or to silence some warnings. -# We rely on signed integer wraparound on overflow, however clang think it -# can do whatever it wants since it's an undefined behavior, so use -fwrapv -# to be sure we get the intended behavior. -WARN_CFLAGS := -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \ - -Wduplicated-cond -Wnull-dereference -SPEC_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement -Wfatal-errors -SPEC_CFLAGS += $(call cc-all-fast,$(WARN_CFLAGS)) - -SPEC_CFLAGS += $(call cc-opt-alt,-fwrapv,-fno-strict-overflow) -SPEC_CFLAGS += $(cc-wnouwo) -SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member) -SPEC_CFLAGS += $(call cc-nowarn,unused-label) -SPEC_CFLAGS += $(call cc-nowarn,sign-compare) -SPEC_CFLAGS += $(call cc-nowarn,unused-parameter) -SPEC_CFLAGS += $(call cc-nowarn,clobbered) -SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers) -SPEC_CFLAGS += $(call cc-nowarn,cast-function-type) -SPEC_CFLAGS += $(call cc-nowarn,string-plus-int) -SPEC_CFLAGS += $(call cc-nowarn,atomic-alignment) - -ifneq ($(ERR),) - SPEC_CFLAGS += -Werror +#### Standard C definition +# Compiler-specific flags that may be used to set the standard behavior we +# rely on and to disable some negative over-optimization. More specifically, +# we rely on signed integer wraparound on overflow, however recently clang and +# gcc decided to change their code generation regarding this and abuse the +# undefined behavior to silently produce invalid code. For this reason we have +# to use -fwrapv or -fno-strict-overflow to guarantee the intended behavior. +# It is preferable not to change this option in order to avoid breakage. +STD_CFLAGS := $(call cc-opt-alt,-fwrapv,-fno-strict-overflow) + +#### Compiler-specific flags to enable certain classes of warnings. +# Some are hard-coded, others are enabled only if supported. +WARN_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement \ + $(call cc-all-fast, \ + -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \ + -Wduplicated-cond -Wnull-dereference) + +#### Compiler-specific flags to enable certain classes of warnings. +NOWARN_CFLAGS := $(cc-wnouwo) +NOWARN_CFLAGS += $(call cc-nowarn,address-of-packed-member) +NOWARN_CFLAGS += $(call cc-nowarn,unused-label) +NOWARN_CFLAGS += $(call cc-nowarn,sign-compare) +NOWARN_CFLAGS += $(call cc-nowarn,unused-parameter) +NOWARN_CFLAGS += $(call cc-nowarn,clobbered) +NOWARN_CFLAGS += $(call cc-nowarn,missing-field-initializers) +NOWARN_CFLAGS += $(call cc-nowarn,cast-function-type) +NOWARN_CFLAGS += $(call cc-nowarn,string-plus-int) +NOWARN_CFLAGS += $(call cc-nowarn,atomic-alignment) + +#### CFLAGS defining error handling +# ERROR_CFLAGS are just accumulators for these variables, they're not meant +# to be exposed nor manipulated outside of this. They're not reported in +# VERBOSE_CFLAGS and don't cause a rebuild when changed. +ERROR_CFLAGS := +ifneq ($(ERR:0=),) + ERROR_CFLAGS += -Werror +endif + +ifneq ($(FAILFAST:0=),) + ERROR_CFLAGS += -Wfatal-errors endif -#### Memory usage tuning -# If small memory footprint is required, you can reduce the buffer size. There -# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory -# with 1000 concurrent sessions. Putting it slightly lower than a page size -# will prevent the additional parameters to go beyond a page. 8030 bytes is -# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning -# macros include : -# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN. -# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024 +#### No longer used SMALL_OPTS = +ifneq ($(SMALL_OPTS),) +$(warning Warning: SMALL_OPTS was forced to "$(SMALL_OPTS)" but is no longer \ + used and will be ignored. Please check if this setting are still relevant, \ + and move it either to DEFINE or to CFLAGS instead.) +endif #### Debug settings # You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx. @@ -228,7 +262,7 @@ SMALL_OPTS = # DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK, # DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV, # DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK, DEBUG_LIST. -DEBUG = -DDEBUG_STRICT -DDEBUG_MEMORY_POOLS +DEBUG = #### Trace options # Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not @@ -258,44 +292,36 @@ SILENT_DEFINE = EXTRA = #### CPU dependent optimizations -# Some CFLAGS are set by default depending on the target CPU. Those flags only -# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use -# them. You should not have to change these options. Better use CPU_CFLAGS or -# even CFLAGS instead. -CPU_CFLAGS.generic = -O2 -CPU_CFLAGS.native = -O2 -march=native -CPU_CFLAGS.i586 = -O2 -march=i586 -CPU_CFLAGS.i686 = -O2 -march=i686 -CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc -CPU_CFLAGS.power8 = -O2 -mcpu=power8 -mtune=power8 -CPU_CFLAGS.power9 = -O2 -mcpu=power9 -mtune=power9 -CPU_CFLAGS.a53 = -O2 -mcpu=cortex-a53 -CPU_CFLAGS.a72 = -O2 -mcpu=cortex-a72 -CPU_CFLAGS.armv81 = -O2 -march=armv8.1-a -CPU_CFLAGS.armv8-auto = -O2 -march=armv8-a+crc -moutline-atomics -CPU_CFLAGS = $(CPU_CFLAGS.$(CPU)) - -#### ARCH dependent flags, may be overridden by CPU flags -ARCH_FLAGS.32 = -m32 -ARCH_FLAGS.64 = -m64 -ARCH_FLAGS.i386 = -m32 -march=i386 -ARCH_FLAGS.i486 = -m32 -march=i486 -ARCH_FLAGS.i586 = -m32 -march=i586 -ARCH_FLAGS.i686 = -m32 -march=i686 -ARCH_FLAGS.x86_64 = -m64 -march=x86-64 -ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH)) - -#### Common CFLAGS -# These CFLAGS contain general optimization options, CPU-specific optimizations -# and debug flags. They may be overridden by some distributions which prefer to -# set all of them at once instead of playing with the CPU and DEBUG variables. -CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS) - -#### Common LDFLAGS -# These LDFLAGS are used as the first "ld" options, regardless of any library -# path or any other option. They may be changed to add any linker-specific -# option at the beginning of the ld command line. -LDFLAGS = $(ARCH_FLAGS) -g +# This may optionally be used to pass CPU-specific optimizations such as +# -march=native, -mcpu=something, -m64 etc independently of CFLAGS if it is +# considered more convenient. Historically, the optimization level was also +# passed there. This is still supported but not recommended though; OPT_CFLAGS +# is better suited. The default is empty. +CPU_CFLAGS = + +#### Architecture dependent flags. +# These flags are passed both to the compiler and to the linker. A number of +# settings may need to be passed to both tools, among which some arch-specific +# options such as -m32 or -m64, some debugging options (-g), some profiling +# options (-pg), some options affecting how the linkage is done (-flto), as +# well as some code analysers such as -fsanitize=address. All of these make +# sense here and will be consistently propagated to both stages. By default +# only the debugging is enabled (-g). +ARCH_FLAGS = -g + +#### Extra CFLAGS +# These CFLAGS are empty by default and are appended at the end of all the +# flags passed to the compiler, so that it is possible to use them to force +# some optimization levels, architecture types and/or disable certain warnings. +# Just set CFLAGS to the desired ones on the "make" command line. +CFLAGS = + +#### Extra LDFLAGS +# These LDFLAGS are used as the first "ld" options just after ARCH_FLAGS, +# regardless of any library path or any other option. They may be used to add +# any linker-specific option at the beginning of the ld command line. It may be +# convenient to set a run time search path (-rpath), see INSTALL for more info. +LDFLAGS = #### list of all "USE_*" options. These ones must be updated if new options are # added, so that the relevant options are properly added to the CFLAGS and to @@ -322,6 +348,9 @@ use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER USE_POLL \ # preset all variables for all supported build options among use_opts $(reset_opts_vars) +# Check that any USE_* variable that was forced actually exist. +$(warn_unknown_options) + #### Target system options # poll() is always supported, unless explicitly disabled by passing USE_POLL="" @@ -330,7 +359,7 @@ USE_POLL = default # SLZ is always supported unless explicitly disabled by passing USE_SLZ="" # or disabled by enabling ZLIB using USE_ZLIB=1 -ifeq ($(USE_ZLIB),) +ifeq ($(USE_ZLIB:0=),) USE_SLZ = default endif @@ -351,7 +380,7 @@ ifeq ($(TARGET),linux-glibc) USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \ USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ - USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN) + USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN USE_SYSTEMD) INSTALL = install -v endif @@ -431,7 +460,6 @@ ifeq ($(TARGET),aix51) set_target_defaults = $(call default_opts, \ USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv - DEBUG_CFLAGS = endif # AIX 5.2 @@ -439,7 +467,6 @@ ifeq ($(TARGET),aix52) set_target_defaults = $(call default_opts, \ USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) TARGET_CFLAGS = -D_MSGQSUPPORT - DEBUG_CFLAGS = endif # AIX 7.2 and above @@ -467,8 +494,8 @@ $(set_target_defaults) # any occurrence of 1 indicates libatomic is necessary. It's better to avoid # linking with it by default as it's not always available nor deployed # (especially on archs which do not need it). -ifneq ($(USE_THREAD),) - ifneq ($(shell $(CC) $(CFLAGS) -dM -E -xc - /dev/null | grep -c 'LOCK_FREE.*1'),0) +ifneq ($(USE_THREAD:0=),) + ifneq ($(shell $(CC) $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(CFLAGS) -dM -E -xc - /dev/null | grep -c 'LOCK_FREE.*1'),0) USE_LIBATOMIC = implicit endif endif @@ -519,7 +546,7 @@ BUILD_OPTIONS := $(call build_options) # possibly be unused though) OPTIONS_CFLAGS += $(call opts_as_defines) -ifneq ($(USE_LIBCRYPT),) +ifneq ($(USE_LIBCRYPT:0=),) ifneq ($(TARGET),openbsd) ifneq ($(TARGET),osx) LIBCRYPT_LDFLAGS = -lcrypt @@ -527,45 +554,45 @@ ifneq ($(USE_LIBCRYPT),) endif endif -ifneq ($(USE_ZLIB),) +ifneq ($(USE_ZLIB:0=),) # Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed. ZLIB_CFLAGS = $(if $(ZLIB_INC),-I$(ZLIB_INC)) ZLIB_LDFLAGS = $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz endif -ifneq ($(USE_SLZ),) +ifneq ($(USE_SLZ:0=),) OPTIONS_OBJS += src/slz.o endif -ifneq ($(USE_POLL),) +ifneq ($(USE_POLL:0=),) OPTIONS_OBJS += src/ev_poll.o endif -ifneq ($(USE_EPOLL),) +ifneq ($(USE_EPOLL:0=),) OPTIONS_OBJS += src/ev_epoll.o endif -ifneq ($(USE_KQUEUE),) +ifneq ($(USE_KQUEUE:0=),) OPTIONS_OBJS += src/ev_kqueue.o endif -ifneq ($(USE_EVPORTS),) +ifneq ($(USE_EVPORTS:0=),) OPTIONS_OBJS += src/ev_evports.o endif -ifneq ($(USE_RT),) +ifneq ($(USE_RT:0=),) RT_LDFLAGS = -lrt endif -ifneq ($(USE_THREAD),) +ifneq ($(USE_THREAD:0=),) THREAD_LDFLAGS = -pthread endif -ifneq ($(USE_BACKTRACE),) +ifneq ($(USE_BACKTRACE:0=),) BACKTRACE_LDFLAGS = -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) endif -ifneq ($(USE_CPU_AFFINITY),) +ifneq ($(USE_CPU_AFFINITY:0=),) OPTIONS_OBJS += src/cpuset.o endif @@ -577,32 +604,32 @@ endif # This is for the WolfSSL variant of the OpenSSL API. Setting it implies # OPENSSL so it's not necessary to set the latter. -ifneq ($(USE_OPENSSL_WOLFSSL),) +ifneq ($(USE_OPENSSL_WOLFSSL:0=),) SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)/wolfssl -I$(SSL_INC)) SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lwolfssl # always automatically set USE_OPENSSL - USE_OPENSSL := $(if $(USE_OPENSSL),$(USE_OPENSSL),implicit) + USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit) endif # This is for the AWS-LC variant of the OpenSSL API. Setting it implies # OPENSSL so it's not necessary to set the latter. -ifneq ($(USE_OPENSSL_AWSLC),) +ifneq ($(USE_OPENSSL_AWSLC:0=),) # always automatically set USE_OPENSSL - USE_OPENSSL := $(if $(USE_OPENSSL),$(USE_OPENSSL),implicit) + USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit) endif # This is for any variant of the OpenSSL API. By default it uses OpenSSL. -ifneq ($(USE_OPENSSL),) +ifneq ($(USE_OPENSSL:0=),) # only preset these for the regular openssl - ifeq ($(USE_OPENSSL_WOLFSSL),) + ifeq ($(USE_OPENSSL_WOLFSSL:0=),) SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)) SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto endif - USE_SSL := $(if $(USE_SSL),$(USE_SSL),implicit) - OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_sample.o src/ssl_crtlist.o src/cfgparse-ssl.o src/ssl_utils.o src/jwt.o src/ssl_ocsp.o + USE_SSL := $(if $(USE_SSL:0=),$(USE_SSL:0=),implicit) + OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_ocsp.o src/ssl_crtlist.o src/ssl_sample.o src/cfgparse-ssl.o src/ssl_gencert.o src/ssl_utils.o src/jwt.o endif -ifneq ($(USE_ENGINE),) +ifneq ($(USE_ENGINE:0=),) # OpenSSL 3.0 emits loud deprecation warnings by default when building with # engine support, and this option is made to silence them. Better use it # only when absolutely necessary, until there's a viable alternative to the @@ -610,25 +637,28 @@ ifneq ($(USE_ENGINE),) ENGINE_CFLAGS = -DOPENSSL_SUPPRESS_DEPRECATED endif -ifneq ($(USE_QUIC),) -OPTIONS_OBJS += src/quic_conn.o src/mux_quic.o src/h3.o src/xprt_quic.o \ - src/quic_frame.o src/quic_tls.o src/quic_tp.o \ - src/quic_stats.o src/quic_sock.o src/proto_quic.o \ - src/qmux_trace.o src/quic_loss.o src/qpack-enc.o \ - src/quic_cc_newreno.o src/quic_cc_cubic.o src/qpack-tbl.o \ - src/qpack-dec.o src/hq_interop.o src/quic_stream.o \ - src/h3_stats.o src/qmux_http.o src/cfgparse-quic.o \ - src/cbuf.o src/quic_cc.o src/quic_cc_nocc.o src/quic_ack.o \ - src/quic_trace.o src/quic_cli.o src/quic_ssl.o \ - src/quic_rx.o src/quic_tx.o src/quic_cid.o src/quic_retry.o\ - src/quic_retransmit.o +ifneq ($(USE_QUIC:0=),) + + +OPTIONS_OBJS += src/quic_rx.o src/mux_quic.o src/h3.o src/quic_tx.o \ + src/quic_conn.o src/quic_frame.o src/quic_sock.o \ + src/quic_ssl.o src/quic_tls.o src/proto_quic.o \ + src/quic_trace.o src/quic_cli.o src/quic_tp.o \ + src/quic_cid.o src/quic_retransmit.o src/quic_retry.o \ + src/quic_loss.o src/quic_cc_cubic.o src/quic_stream.o \ + src/xprt_quic.o src/quic_ack.o src/hq_interop.o \ + src/quic_cc_newreno.o src/qmux_http.o \ + src/quic_cc_nocc.o src/qpack-dec.o src/quic_cc.o \ + src/cfgparse-quic.o src/qmux_trace.o src/qpack-enc.o \ + src/qpack-tbl.o src/h3_stats.o src/quic_stats.o \ + src/quic_fctl.o src/cbuf.o endif -ifneq ($(USE_QUIC_OPENSSL_COMPAT),) +ifneq ($(USE_QUIC_OPENSSL_COMPAT:0=),) OPTIONS_OBJS += src/quic_openssl_compat.o endif -ifneq ($(USE_LUA),) +ifneq ($(USE_LUA:0=),) check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;) LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/"))) @@ -661,34 +691,20 @@ ifneq ($(USE_LUA),) OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o endif # USE_LUA -ifneq ($(USE_PROMEX),) +ifneq ($(USE_PROMEX:0=),) OPTIONS_OBJS += addons/promex/service-prometheus.o + PROMEX_CFLAGS = -Iaddons/promex/include endif -ifneq ($(USE_DEVICEATLAS),) +ifneq ($(USE_DEVICEATLAS:0=),) # Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path - # to DeviceAtlas headers and libraries if needed. + # to DeviceAtlas headers and libraries if needed. In this context, DEVICEATLAS_NOCACHE + # can be used to disable the cache support if needed (this also removes the necessity of having + # a C++ toolchain installed). DEVICEATLAS_INC = $(DEVICEATLAS_SRC) DEVICEATLAS_LIB = $(DEVICEATLAS_SRC) - ifeq ($(DEVICEATLAS_SRC),) - DEVICEATLAS_LDFLAGS += -lda - else - ifeq ($(USE_PCRE),) - ifeq ($(USE_PCRE2),) - $(error the DeviceAtlas module needs the PCRE or the PCRE2 library in order to compile) - endif - endif - ifneq ($(USE_PCRE2),) - DEVICEATLAS_CFLAGS += -DDA_REGEX_HDR=\"dac_pcre2.c\" -DDA_REGEX_TAG=2 - endif - OPTIONS_OBJS += $(DEVICEATLAS_LIB)/Os/daunix.o - OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dadwcom.o - OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dasch.o - OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o - OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o - endif + include addons/deviceatlas/Makefile.inc OPTIONS_OBJS += addons/deviceatlas/da.o - DEVICEATLAS_CFLAGS += $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC)) $(if $(DEVICEATLAS_SRC),-DDATLAS_DA_NOCACHE) endif # Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path @@ -700,12 +716,12 @@ endif 51DEGREES_LIB = $(51DEGREES_SRC) 51DEGREES_VER = 3 -ifneq ($(USE_51DEGREES),) +ifneq ($(USE_51DEGREES:0=),) ifeq ($(51DEGREES_VER),4) # v4 here _51DEGREES_SRC = $(shell find $(51DEGREES_LIB) -maxdepth 2 -name '*.c') OPTIONS_OBJS += $(_51DEGREES_SRC:%.c=%.o) 51DEGREES_CFLAGS += -DUSE_51DEGREES_V4 - ifeq ($(USE_THREAD),) + ifeq ($(USE_THREAD:0=),) 51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING -DFIFTYONE_DEGREES_NO_THREADING endif USE_LIBATOMIC = implicit @@ -714,7 +730,7 @@ ifneq ($(USE_51DEGREES),) ifeq ($(51DEGREES_VER),3) # v3 here OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o - ifeq ($(USE_THREAD),) + ifeq ($(USE_THREAD:0=),) 51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING else OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o @@ -731,7 +747,7 @@ ifneq ($(USE_51DEGREES),) USE_MATH = implicit endif # USE_51DEGREES -ifneq ($(USE_WURFL),) +ifneq ($(USE_WURFL:0=),) # Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path # to WURFL headers and libraries if needed. WURFL_INC = $(WURFL_SRC) @@ -747,12 +763,12 @@ ifneq ($(USE_WURFL),) WURFL_LDFLAGS = $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl endif -ifneq ($(USE_SYSTEMD),) - SYSTEMD_LDFLAGS = -lsystemd +ifneq ($(USE_SYSTEMD:0=),) + OPTIONS_OBJS += src/systemd.o endif -ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) - ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) +ifneq ($(USE_PCRE:0=)$(USE_STATIC_PCRE:0=)$(USE_PCRE_JIT:0=),) + ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),) $(error cannot compile both PCRE and PCRE2 support) endif # PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths, @@ -763,7 +779,7 @@ ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) # locations. # in case only USE_STATIC_PCRE/USE_PCRE_JIT were set - USE_PCRE := $(if $(USE_PCRE),$(USE_PCRE),implicit) + USE_PCRE := $(if $(USE_PCRE:0=),$(USE_PCRE:0=),implicit) PCRE_CONFIG := pcre-config PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local) ifneq ($(PCREDIR),) @@ -772,16 +788,16 @@ ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) endif PCRE_CFLAGS := $(if $(PCRE_INC),-I$(PCRE_INC)) - ifeq ($(USE_STATIC_PCRE),) + ifeq ($(USE_STATIC_PCRE:0=),) PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre else PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic endif endif # USE_PCRE -ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) +ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),) # in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set - USE_PCRE2 := $(if $(USE_PCRE2),$(USE_PCRE2),implicit) + USE_PCRE2 := $(if $(USE_PCRE2:0=),$(USE_PCRE2:0=),implicit) PCRE2_CONFIG := pcre2-config PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local) ifneq ($(PCRE2DIR),) @@ -811,7 +827,7 @@ ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) endif endif - ifneq ($(USE_STATIC_PCRE2),) + ifneq ($(USE_STATIC_PCRE2:0=),) PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic else PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) @@ -819,28 +835,28 @@ ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) endif # PCRE2DIR endif # USE_PCRE2 -ifneq ($(USE_NS),) +ifneq ($(USE_NS:0=),) OPTIONS_OBJS += src/namespace.o endif -ifneq ($(USE_LINUX_CAP),) +ifneq ($(USE_LINUX_CAP:0=),) OPTIONS_OBJS += src/linuxcap.o endif -ifneq ($(USE_OT),) +ifneq ($(USE_OT:0=),) include addons/ot/Makefile endif # better keep this one close to the end, as several libs above may need it -ifneq ($(USE_DL),) +ifneq ($(USE_DL:0=),) DL_LDFLAGS = -ldl endif -ifneq ($(USE_MATH),) +ifneq ($(USE_MATH:0=),) MATH_LDFLAGS = -lm endif -ifneq ($(USE_LIBATOMIC),) +ifneq ($(USE_LIBATOMIC:0=),) LIBATOMIC_LDFLAGS = -latomic endif @@ -851,11 +867,11 @@ endif $(collect_opts_flags) #### Global compile options -VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) +VERBOSE_CFLAGS = $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(TARGET_CFLAGS) $(CFLAGS) $(DEFINE) COPTS = -Iinclude -COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE) -COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC) +COPTS += $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(TARGET_CFLAGS) $(DEFINE) $(SILENT_DEFINE) +COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(CFLAGS) $(ADDINC) ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),) COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\" @@ -930,38 +946,43 @@ ifneq ($(EXTRA_OBJS),) OBJS += $(EXTRA_OBJS) endif -OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \ - src/stream.o src/stats.o src/http_ana.o src/server.o \ - src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \ - src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \ - src/cli.o src/connection.o src/proxy.o src/http_htx.o \ - src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \ - src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \ - src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \ - src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \ - src/h2.o src/filters.o src/server_state.o src/payload.o \ - src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o \ - src/cfgparse-global.o src/trace.o src/tcp_sample.o src/http_ext.o \ - src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \ - src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \ - src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \ - src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \ - src/flt_bwlim.o src/thread.o src/http.o src/lb_chash.o src/applet.o \ - src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \ - src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \ - src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \ - src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \ - src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \ - src/fix.o src/ev_select.o src/arg.o src/sock_inet.o src/event_hdl.o \ - src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o \ - src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \ - src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \ - src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \ - src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \ - src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \ - src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \ - src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \ - src/ebtree.o src/hash.o src/dgram.o src/version.o src/proto_rhttp.o +OBJS += src/mux_h2.o src/mux_h1.o src/mux_fcgi.o src/stream.o \ + src/log.o src/server.o src/tcpcheck.o src/http_ana.o \ + src/stick_table.o src/tools.o src/sample.o src/flt_spoe.o \ + src/cfgparse.o src/peers.o src/cli.o src/resolvers.o \ + src/connection.o src/backend.o src/cache.o src/http_htx.o \ + src/proxy.o src/stconn.o src/check.o src/haproxy.o \ + src/stats-html.o src/listener.o src/pattern.o src/debug.o \ + src/cfgparse-listen.o src/http_client.o src/activity.o \ + src/applet.o src/http_act.o src/http_fetch.o src/http_ext.o \ + src/dns.o src/vars.o src/tcp_rules.o src/pool.o src/stats.o \ + src/stats-proxy.o src/sink.o src/filters.o src/mux_pt.o \ + src/event_hdl.o src/server_state.o src/h1_htx.o src/h1.o \ + src/flt_http_comp.o src/task.o src/payload.o src/fcgi-app.o \ + src/map.o src/trace.o src/tcp_sample.o src/tcp_act.o \ + src/session.o src/htx.o src/cfgparse-global.o src/mjson.o \ + src/h2.o src/ring.o src/fd.o src/sock.o src/mworker.o \ + src/flt_trace.o src/thread.o src/proto_rhttp.o src/acl.o \ + src/http.o src/flt_bwlim.o src/channel.o src/queue.o \ + src/mqtt.o src/proto_tcp.o src/lb_chash.o src/http_rules.o \ + src/errors.o src/extcheck.o src/dns_ring.o src/stats-json.o \ + src/http_conv.o src/frontend.o src/proto_sockpair.o \ + src/compression.o src/ncbuf.o src/stats-file.o src/raw_sock.o \ + src/lb_fwrr.o src/action.o src/uri_normalizer.o \ + src/proto_uxst.o src/ebmbtree.o src/xprt_handshake.o \ + src/protocol.o src/proto_udp.o src/lb_fwlc.o src/sha1.o \ + src/proto_uxdg.o src/mailers.o src/lb_fas.o src/cfgcond.o \ + src/cfgdiag.o src/sock_unix.o src/sock_inet.o \ + src/mworker-prog.o src/lb_map.o src/ev_select.o src/shctx.o \ + src/hpack-dec.o src/fix.o src/clock.o src/cfgparse-tcp.o \ + src/arg.o src/signal.o src/fcgi.o src/dynbuf.o src/regex.o \ + src/lru.o src/lb_ss.o src/eb64tree.o src/chunk.o \ + src/cfgparse-unix.o src/guid.o src/ebimtree.o src/eb32tree.o \ + src/eb32sctree.o src/base64.o src/uri_auth.o src/time.o \ + src/hpack-tbl.o src/ebsttree.o src/ebistree.o src/auth.o \ + src/hpack-huff.o src/freq_ctr.o src/dict.o src/wdt.o \ + src/pipe.o src/init.o src/http_acl.o src/hpack-enc.o \ + src/ebtree.o src/dgram.o src/hash.o src/version.o ifneq ($(TRACE),) OBJS += src/calltrace.o @@ -1001,7 +1022,7 @@ IGNORE_OPTS=help install install-man install-doc install-bin \ ifneq ($(TARGET),) ifeq ($(filter $(firstword $(MAKECMDGOALS)),$(IGNORE_OPTS)),) -build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) +build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) .build_opts: $(build_opts) else .build_opts: @@ -1011,7 +1032,7 @@ else endif # non-empty target haproxy: $(OPTIONS_OBJS) $(OBJS) - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) objsize: haproxy $(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort @@ -1020,31 +1041,31 @@ objsize: haproxy $(cmd_CC) $(COPTS) -c -o $@ $< admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/flags/flags: dev/flags/flags.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/haring/haring: dev/haring/haring.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/hpack/%: dev/hpack/%.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/poll/poll: $(cmd_MAKE) -C dev/poll poll CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' dev/qpack/decode: dev/qpack/decode.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/tcploop/tcploop: $(cmd_MAKE) -C dev/tcploop tcploop CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' dev/udp/udp-perturb: dev/udp/udp-perturb.o - $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) + $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) # rebuild it every time .PHONY: src/version.c dev/poll/poll dev/tcploop/tcploop @@ -1055,8 +1076,6 @@ src/calltrace.o: src/calltrace.c $(DEP) src/haproxy.o: src/haproxy.c $(DEP) $(cmd_CC) $(COPTS) \ -DBUILD_TARGET='"$(strip $(TARGET))"' \ - -DBUILD_ARCH='"$(strip $(ARCH))"' \ - -DBUILD_CPU='"$(strip $(CPU))"' \ -DBUILD_CC='"$(strip $(CC))"' \ -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \ -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \ @@ -1156,27 +1175,30 @@ update-version: # settings are also listed if they're explicitly set on the command line, or if # they are not empty. Implicit "USE_*" are not listed. opts: - @echo -n 'Using: ' - @echo -n 'TARGET="$(strip $(TARGET))" ' - @echo -n 'ARCH="$(strip $(ARCH))" ' - @echo -n 'CPU="$(strip $(CPU))" ' - @echo -n 'CC="$(strip $(CC))" ' - @echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" ' - @echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" ' - @echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" ' - @#echo "$(strip $(BUILD_OPTIONS))" + @echo 'Using the following variables (copy-pastable as make arguments):' + @echo ' TARGET="$(strip $(TARGET))" '\\ + @echo ' ARCH="$(strip $(ARCH))" '\\ + @echo ' CC="$(strip $(CC))" '\\ + @echo ' OPT_CFLAGS="$(strip $(OPT_CFLAGS))" '\\ + @echo ' ARCH_FLAGS="$(strip $(ARCH_FLAGS))" '\\ + @echo ' CPU_CFLAGS="$(strip $(CPU_CFLAGS))" '\\ + @echo ' STD_CFLAGS="$(strip $(STD_CFLAGS))" '\\ + @echo ' WARN_CFLAGS="$(strip $(WARN_CFLAGS))" '\\ + @echo ' NOWARN_CFLAGS="$(strip $(NOWARN_CFLAGS))" '\\ + @echo ' ERROR_CFLAGS="$(strip $(ERROR_CFLAGS))" '\\ + @echo ' CFLAGS="$(strip $(CFLAGS))" '\\ @$(foreach opt,$(enabled_opts),\ $(if $(subst command line,,$(origin USE_$(opt))),,\ - echo -n 'USE_$(opt)=$(USE_$(opt)) ';) \ + echo ' USE_$(opt)=$(USE_$(opt:0=)) '\\;) \ $(if $(subst command line,,$(origin $(opt)_CFLAGS)),\ - $(if $($(opt)_CFLAGS),echo -n '$(opt)_CFLAGS="$($(opt)_CFLAGS)" ';),\ - echo -n '$(opt)_CFLAGS="$($(opt)_CFLAGS)" ';) \ + $(if $($(opt)_CFLAGS),echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;),\ + echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;) \ $(if $(subst command line,,$(origin $(opt)_LDFLAGS)),\ - $(if $($(opt)_LDFLAGS),echo -n '$(opt)_LDFLAGS="$($(opt)_LDFLAGS)" ';),\ - echo -n '$(opt)_LDFLAGS="$($(opt)_LDFLAGS)" ';)) + $(if $($(opt)_LDFLAGS),echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;),\ + echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;)) + @echo ' LDFLAGS="$(strip $(LDFLAGS))"' @echo @echo 'COPTS="$(strip $(COPTS))"' - @echo 'LDFLAGS="$(strip $(LDFLAGS))"' @echo 'LDOPTS="$(strip $(LDOPTS))"' @echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"' @echo 'OBJS="$(strip $(OBJS))"' -- cgit v1.2.3