From b46aad6df449445a9fc4aa7b32bd40005438e3f7 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 13 Apr 2024 14:18:05 +0200 Subject: Adding upstream version 2.9.5. Signed-off-by: Daniel Baumann --- src/stream.c | 4045 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4045 insertions(+) create mode 100644 src/stream.c (limited to 'src/stream.c') diff --git a/src/stream.c b/src/stream.c new file mode 100644 index 0000000..a3c0c93 --- /dev/null +++ b/src/stream.c @@ -0,0 +1,4045 @@ +/* + * Stream management functions. + * + * Copyright 2000-2012 Willy Tarreau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +DECLARE_POOL(pool_head_stream, "stream", sizeof(struct stream)); +DECLARE_POOL(pool_head_uniqueid, "uniqueid", UNIQUEID_LEN); + +/* incremented by each "show sess" to fix a delimiter between streams */ +unsigned stream_epoch = 0; + +/* List of all use-service keywords. */ +static struct list service_keywords = LIST_HEAD_INIT(service_keywords); + + +/* trace source and events */ +static void strm_trace(enum trace_level level, uint64_t mask, + const struct trace_source *src, + const struct ist where, const struct ist func, + const void *a1, const void *a2, const void *a3, const void *a4); + +/* The event representation is split like this : + * strm - stream + * sc - stream connector + * http - http analyzis + * tcp - tcp analyzis + * + * STRM_EV_* macros are defined in + */ +static const struct trace_event strm_trace_events[] = { + { .mask = STRM_EV_STRM_NEW, .name = "strm_new", .desc = "new stream" }, + { .mask = STRM_EV_STRM_FREE, .name = "strm_free", .desc = "release stream" }, + { .mask = STRM_EV_STRM_ERR, .name = "strm_err", .desc = "error during stream processing" }, + { .mask = STRM_EV_STRM_ANA, .name = "strm_ana", .desc = "stream analyzers" }, + { .mask = STRM_EV_STRM_PROC, .name = "strm_proc", .desc = "stream processing" }, + + { .mask = STRM_EV_CS_ST, .name = "sc_state", .desc = "processing connector states" }, + + { .mask = STRM_EV_HTTP_ANA, .name = "http_ana", .desc = "HTTP analyzers" }, + { .mask = STRM_EV_HTTP_ERR, .name = "http_err", .desc = "error during HTTP analyzis" }, + + { .mask = STRM_EV_TCP_ANA, .name = "tcp_ana", .desc = "TCP analyzers" }, + { .mask = STRM_EV_TCP_ERR, .name = "tcp_err", .desc = "error during TCP analyzis" }, + + { .mask = STRM_EV_FLT_ANA, .name = "flt_ana", .desc = "Filter analyzers" }, + { .mask = STRM_EV_FLT_ERR, .name = "flt_err", .desc = "error during filter analyzis" }, + {} +}; + +static const struct name_desc strm_trace_lockon_args[4] = { + /* arg1 */ { /* already used by the stream */ }, + /* arg2 */ { }, + /* arg3 */ { }, + /* arg4 */ { } +}; + +static const struct name_desc strm_trace_decoding[] = { +#define STRM_VERB_CLEAN 1 + { .name="clean", .desc="only user-friendly stuff, generally suitable for level \"user\"" }, +#define STRM_VERB_MINIMAL 2 + { .name="minimal", .desc="report info on streams and connectors" }, +#define STRM_VERB_SIMPLE 3 + { .name="simple", .desc="add info on request and response channels" }, +#define STRM_VERB_ADVANCED 4 + { .name="advanced", .desc="add info on channel's buffer for data and developer levels only" }, +#define STRM_VERB_COMPLETE 5 + { .name="complete", .desc="add info on channel's buffer" }, + { /* end */ } +}; + +struct trace_source trace_strm = { + .name = IST("stream"), + .desc = "Applicative stream", + .arg_def = TRC_ARG1_STRM, // TRACE()'s first argument is always a stream + .default_cb = strm_trace, + .known_events = strm_trace_events, + .lockon_args = strm_trace_lockon_args, + .decoding = strm_trace_decoding, + .report_events = ~0, // report everything by default +}; + +#define TRACE_SOURCE &trace_strm +INITCALL1(STG_REGISTER, trace_register_source, TRACE_SOURCE); + +/* the stream traces always expect that arg1, if non-null, is of a stream (from + * which we can derive everything), that arg2, if non-null, is an http + * transaction, that arg3, if non-null, is an http message. + */ +static void strm_trace(enum trace_level level, uint64_t mask, const struct trace_source *src, + const struct ist where, const struct ist func, + const void *a1, const void *a2, const void *a3, const void *a4) +{ + const struct stream *s = a1; + const struct http_txn *txn = a2; + const struct http_msg *msg = a3; + struct task *task; + const struct channel *req, *res; + struct htx *htx; + + if (!s || src->verbosity < STRM_VERB_CLEAN) + return; + + task = s->task; + req = &s->req; + res = &s->res; + htx = (msg ? htxbuf(&msg->chn->buf) : NULL); + + /* General info about the stream (htx/tcp, id...) */ + chunk_appendf(&trace_buf, " : [%u,%s]", + s->uniq_id, ((s->flags & SF_HTX) ? "HTX" : "TCP")); + if (isttest(s->unique_id)) { + chunk_appendf(&trace_buf, " id="); + b_putist(&trace_buf, s->unique_id); + } + + /* Front and back stream connector state */ + chunk_appendf(&trace_buf, " SC=(%s,%s)", + sc_state_str(s->scf->state), sc_state_str(s->scb->state)); + + /* If txn is defined, HTTP req/rep states */ + if (txn) + chunk_appendf(&trace_buf, " HTTP=(%s,%s)", + h1_msg_state_str(txn->req.msg_state), h1_msg_state_str(txn->rsp.msg_state)); + if (msg) + chunk_appendf(&trace_buf, " %s", ((msg->chn->flags & CF_ISRESP) ? "RESPONSE" : "REQUEST")); + + if (src->verbosity == STRM_VERB_CLEAN) + return; + + /* If msg defined, display status-line if possible (verbosity > MINIMAL) */ + if (src->verbosity > STRM_VERB_MINIMAL && htx && htx_nbblks(htx)) { + const struct htx_blk *blk = __htx_get_head_blk(htx); + const struct htx_sl *sl = htx_get_blk_ptr(htx, blk); + enum htx_blk_type type = htx_get_blk_type(blk); + + if (type == HTX_BLK_REQ_SL || type == HTX_BLK_RES_SL) + chunk_appendf(&trace_buf, " - \"%.*s %.*s %.*s\"", + HTX_SL_P1_LEN(sl), HTX_SL_P1_PTR(sl), + HTX_SL_P2_LEN(sl), HTX_SL_P2_PTR(sl), + HTX_SL_P3_LEN(sl), HTX_SL_P3_PTR(sl)); + } + + chunk_appendf(&trace_buf, " - t=%p t.exp=%d s=(%p,0x%08x,0x%x)", + task, tick_isset(task->expire) ? TICKS_TO_MS(task->expire - now_ms) : TICK_ETERNITY, s, s->flags, s->conn_err_type); + + /* If txn defined info about HTTP msgs, otherwise info about SI. */ + if (txn) { + chunk_appendf(&trace_buf, " txn.flags=0x%08x, http.flags=(0x%08x,0x%08x) status=%d", + txn->flags, txn->req.flags, txn->rsp.flags, txn->status); + } + else { + chunk_appendf(&trace_buf, " scf=(%p,%d,0x%08x,0x%x) scb=(%p,%d,0x%08x,0x%x) scf.exp(r,w)=(%d,%d) scb.exp(r,w)=(%d,%d) retries=%d", + s->scf, s->scf->state, s->scf->flags, s->scf->sedesc->flags, + s->scb, s->scb->state, s->scb->flags, s->scb->sedesc->flags, + tick_isset(sc_ep_rcv_ex(s->scf)) ? TICKS_TO_MS(sc_ep_rcv_ex(s->scf) - now_ms) : TICK_ETERNITY, + tick_isset(sc_ep_snd_ex(s->scf)) ? TICKS_TO_MS(sc_ep_snd_ex(s->scf) - now_ms) : TICK_ETERNITY, + tick_isset(sc_ep_rcv_ex(s->scb)) ? TICKS_TO_MS(sc_ep_rcv_ex(s->scb) - now_ms) : TICK_ETERNITY, + tick_isset(sc_ep_snd_ex(s->scb)) ? TICKS_TO_MS(sc_ep_snd_ex(s->scb) - now_ms) : TICK_ETERNITY, + s->conn_retries); + } + + if (src->verbosity == STRM_VERB_MINIMAL) + return; + + + /* If txn defined, don't display all channel info */ + if (src->verbosity == STRM_VERB_SIMPLE || txn) { + chunk_appendf(&trace_buf, " req=(%p .fl=0x%08x .exp=%d)", + req, req->flags, tick_isset(req->analyse_exp) ? TICKS_TO_MS(req->analyse_exp - now_ms) : TICK_ETERNITY); + chunk_appendf(&trace_buf, " res=(%p .fl=0x%08x .exp=%d)", + res, res->flags, tick_isset(res->analyse_exp) ? TICKS_TO_MS(res->analyse_exp - now_ms) : TICK_ETERNITY); + } + else { + chunk_appendf(&trace_buf, " req=(%p .fl=0x%08x .ana=0x%08x .exp=%u .o=%lu .tot=%llu .to_fwd=%u)", + req, req->flags, req->analysers, req->analyse_exp, + (long)req->output, req->total, req->to_forward); + chunk_appendf(&trace_buf, " res=(%p .fl=0x%08x .ana=0x%08x .exp=%u .o=%lu .tot=%llu .to_fwd=%u)", + res, res->flags, res->analysers, res->analyse_exp, + (long)res->output, res->total, res->to_forward); + } + + if (src->verbosity == STRM_VERB_SIMPLE || + (src->verbosity == STRM_VERB_ADVANCED && src->level < TRACE_LEVEL_DATA)) + return; + + /* channels' buffer info */ + if (s->flags & SF_HTX) { + struct htx *rqhtx = htxbuf(&req->buf); + struct htx *rphtx = htxbuf(&res->buf); + + chunk_appendf(&trace_buf, " htx=(%u/%u#%u, %u/%u#%u)", + rqhtx->data, rqhtx->size, htx_nbblks(rqhtx), + rphtx->data, rphtx->size, htx_nbblks(rphtx)); + } + else { + chunk_appendf(&trace_buf, " buf=(%u@%p+%u/%u, %u@%p+%u/%u)", + (unsigned int)b_data(&req->buf), b_orig(&req->buf), + (unsigned int)b_head_ofs(&req->buf), (unsigned int)b_size(&req->buf), + (unsigned int)b_data(&res->buf), b_orig(&res->buf), + (unsigned int)b_head_ofs(&res->buf), (unsigned int)b_size(&res->buf)); + } + + /* If msg defined, display htx info if defined (level > USER) */ + if (src->level > TRACE_LEVEL_USER && htx && htx_nbblks(htx)) { + int full = 0; + + /* Full htx info (level > STATE && verbosity > SIMPLE) */ + if (src->level > TRACE_LEVEL_STATE) { + if (src->verbosity == STRM_VERB_COMPLETE) + full = 1; + } + + chunk_memcat(&trace_buf, "\n\t", 2); + htx_dump(&trace_buf, htx, full); + } +} + +/* Upgrade an existing stream for stream connector . Return < 0 on error. This + * is only valid right after a TCP to H1 upgrade. The stream should be + * "reativated" by removing SF_IGNORE flag. And the right mode must be set. On + * success, buffer is transferred to the stream and thus points to + * BUF_NULL. On error, it is unchanged and it is the caller responsibility to + * release it (this never happens for now). + */ +int stream_upgrade_from_sc(struct stconn *sc, struct buffer *input) +{ + struct stream *s = __sc_strm(sc); + const struct mux_ops *mux = sc_mux_ops(sc); + + if (mux) { + if (mux->flags & MX_FL_HTX) + s->flags |= SF_HTX; + } + + if (!b_is_null(input)) { + /* Xfer the input buffer to the request channel. will + * than point to BUF_NULL. From this point, it is the stream + * responsibility to release it. + */ + s->req.buf = *input; + *input = BUF_NULL; + s->req.total = (IS_HTX_STRM(s) ? htxbuf(&s->req.buf)->data : b_data(&s->req.buf)); + sc_ep_report_read_activity(s->scf); + } + + s->req.flags |= CF_READ_EVENT; /* Always report a read event */ + s->flags &= ~SF_IGNORE; + + task_wakeup(s->task, TASK_WOKEN_INIT); + return 0; +} + +/* Callback used to wake up a stream when an input buffer is available. The + * stream 's stream connectors are checked for a failed buffer allocation + * as indicated by the presence of the SC_FL_NEED_BUFF flag and the lack of a + * buffer, and and input buffer is assigned there (at most one). The function + * returns 1 and wakes the stream up if a buffer was taken, otherwise zero. + * It's designed to be called from __offer_buffer(). + */ +int stream_buf_available(void *arg) +{ + struct stream *s = arg; + + if (!s->req.buf.size && !sc_ep_have_ff_data(s->scb) && s->scf->flags & SC_FL_NEED_BUFF && + b_alloc(&s->req.buf)) + sc_have_buff(s->scf); + else if (!s->res.buf.size && !sc_ep_have_ff_data(s->scf) && s->scb->flags & SC_FL_NEED_BUFF && + b_alloc(&s->res.buf)) + sc_have_buff(s->scb); + else + return 0; + + task_wakeup(s->task, TASK_WOKEN_RES); + return 1; + +} + +/* This function is called from the session handler which detects the end of + * handshake, in order to complete initialization of a valid stream. It must be + * called with a completely initialized session. It returns the pointer to + * the newly created stream, or NULL in case of fatal error. The client-facing + * end point is assigned to , which must be valid. The stream's task + * is configured with a nice value inherited from the listener's nice if any. + * The task's context is set to the new stream, and its function is set to + * process_stream(). Target and analysers are null. is used as input + * buffer for the request channel and may contain data. On success, it is + * transfer to the stream and is set to BUF_NULL. On error, + * buffer is unchanged and it is the caller responsibility to release it. + */ +struct stream *stream_new(struct session *sess, struct stconn *sc, struct buffer *input) +{ + struct stream *s; + struct task *t; + + DBG_TRACE_ENTER(STRM_EV_STRM_NEW); + if (unlikely((s = pool_alloc(pool_head_stream)) == NULL)) + goto out_fail_alloc; + + /* minimum stream initialization required for an embryonic stream is + * fairly low. We need very little to execute L4 ACLs, then we need a + * task to make the client-side connection live on its own. + * - flags + * - stick-entry tracking + */ + s->flags = 0; + s->logs.logwait = sess->fe->to_log; + s->logs.level = 0; + s->logs.request_ts = 0; + s->logs.t_queue = -1; + s->logs.t_connect = -1; + s->logs.t_data = -1; + s->logs.t_close = 0; + s->logs.bytes_in = s->logs.bytes_out = 0; + s->logs.prx_queue_pos = 0; /* we get the number of pending conns before us */ + s->logs.srv_queue_pos = 0; /* we will get this number soon */ + s->obj_type = OBJ_TYPE_STREAM; + + s->logs.accept_date = sess->accept_date; + s->logs.accept_ts = sess->accept_ts; + s->logs.t_handshake = sess->t_handshake; + s->logs.t_idle = sess->t_idle; + + /* default logging function */ + s->do_log = strm_log; + + /* default error reporting function, may be changed by analysers */ + s->srv_error = default_srv_error; + + /* Initialise the current rule list pointer to NULL. We are sure that + * any rulelist match the NULL pointer. + */ + s->current_rule_list = NULL; + s->current_rule = NULL; + s->rules_exp = TICK_ETERNITY; + s->last_rule_file = NULL; + s->last_rule_line = 0; + + s->stkctr = NULL; + if (pool_head_stk_ctr) { + s->stkctr = pool_alloc(pool_head_stk_ctr); + if (!s->stkctr) + goto out_fail_alloc; + + /* Copy SC counters for the stream. We don't touch refcounts because + * any reference we have is inherited from the session. Since the stream + * doesn't exist without the session, the session's existence guarantees + * we don't lose the entry. During the store operation, the stream won't + * touch these ones. + */ + memcpy(s->stkctr, sess->stkctr, sizeof(s->stkctr[0]) * global.tune.nb_stk_ctr); + } + + s->sess = sess; + + s->stream_epoch = _HA_ATOMIC_LOAD(&stream_epoch); + s->uniq_id = _HA_ATOMIC_FETCH_ADD(&global.req_count, 1); + + /* OK, we're keeping the stream, so let's properly initialize the stream */ + LIST_INIT(&s->back_refs); + + LIST_INIT(&s->buffer_wait.list); + s->buffer_wait.target = s; + s->buffer_wait.wakeup_cb = stream_buf_available; + + s->lat_time = s->cpu_time = 0; + s->call_rate.curr_tick = s->call_rate.curr_ctr = s->call_rate.prev_ctr = 0; + s->pcli_next_pid = 0; + s->pcli_flags = 0; + s->unique_id = IST_NULL; + + if ((t = task_new_here()) == NULL) + goto out_fail_alloc; + + s->task = t; + s->pending_events = 0; + s->conn_retries = 0; + s->conn_exp = TICK_ETERNITY; + s->conn_err_type = STRM_ET_NONE; + s->prev_conn_state = SC_ST_INI; + t->process = process_stream; + t->context = s; + t->expire = TICK_ETERNITY; + if (sess->listener) + t->nice = sess->listener->bind_conf->nice; + + /* Note: initially, the stream's backend points to the frontend. + * This changes later when switching rules are executed or + * when the default backend is assigned. + */ + s->be = sess->fe; + s->req_cap = NULL; + s->res_cap = NULL; + + /* Initialize all the variables contexts even if not used. + * This permits to prune these contexts without errors. + * + * We need to make sure that those lists are not re-initialized + * by stream-dependant underlying code because we could lose + * track of already defined variables, leading to data inconsistency + * and memory leaks... + * + * For reference: we had a very old bug caused by vars_txn and + * vars_reqres being accidentally re-initialized in http_create_txn() + * (https://github.com/haproxy/haproxy/issues/1935) + */ + vars_init_head(&s->vars_txn, SCOPE_TXN); + vars_init_head(&s->vars_reqres, SCOPE_REQ); + + /* Set SF_HTX flag for HTTP frontends. */ + if (sess->fe->mode == PR_MODE_HTTP) + s->flags |= SF_HTX; + + s->scf = sc; + if (sc_attach_strm(s->scf, s) < 0) + goto out_fail_attach_scf; + + s->scb = sc_new_from_strm(s, SC_FL_ISBACK); + if (!s->scb) + goto out_fail_alloc_scb; + + sc_set_state(s->scf, SC_ST_EST); + + if (likely(sess->fe->options2 & PR_O2_INDEPSTR)) + s->scf->flags |= SC_FL_INDEP_STR; + + if (likely(sess->fe->options2 & PR_O2_INDEPSTR)) + s->scb->flags |= SC_FL_INDEP_STR; + + if (sc_ep_test(sc, SE_FL_WEBSOCKET)) + s->flags |= SF_WEBSOCKET; + if (sc_conn(sc)) { + const struct mux_ops *mux = sc_mux_ops(sc); + + if (mux && mux->flags & MX_FL_HTX) + s->flags |= SF_HTX; + } + + stream_init_srv_conn(s); + s->target = sess->fe->default_target; + + s->pend_pos = NULL; + s->priority_class = 0; + s->priority_offset = 0; + + /* init store persistence */ + s->store_count = 0; + + channel_init(&s->req); + s->req.flags |= CF_READ_EVENT; /* the producer is already connected */ + s->req.analysers = sess->listener ? sess->listener->bind_conf->analysers : sess->fe->fe_req_ana; + + if (IS_HTX_STRM(s)) { + /* Be sure to have HTTP analysers because in case of + * "destructive" stream upgrade, they may be missing (e.g + * TCP>H2) + */ + s->req.analysers |= AN_REQ_WAIT_HTTP|AN_REQ_HTTP_PROCESS_FE; + } + + if (!sess->fe->fe_req_ana) { + channel_auto_connect(&s->req); /* don't wait to establish connection */ + channel_auto_close(&s->req); /* let the producer forward close requests */ + } + + s->scf->ioto = sess->fe->timeout.client; + s->req.analyse_exp = TICK_ETERNITY; + + channel_init(&s->res); + s->res.flags |= CF_ISRESP; + s->res.analysers = 0; + + if (sess->fe->options2 & PR_O2_NODELAY) { + s->scf->flags |= SC_FL_SND_NEVERWAIT; + s->scb->flags |= SC_FL_SND_NEVERWAIT; + } + + s->scb->ioto = TICK_ETERNITY; + s->res.analyse_exp = TICK_ETERNITY; + + s->txn = NULL; + s->hlua = NULL; + + s->resolv_ctx.requester = NULL; + s->resolv_ctx.hostname_dn = NULL; + s->resolv_ctx.hostname_dn_len = 0; + s->resolv_ctx.parent = NULL; + + s->tunnel_timeout = TICK_ETERNITY; + + LIST_APPEND(&th_ctx->streams, &s->list); + + if (flt_stream_init(s) < 0 || flt_stream_start(s) < 0) + goto out_fail_accept; + + /* just in case the caller would have pre-disabled it */ + se_will_consume(s->scf->sedesc); + + if (sess->fe->accept && sess->fe->accept(s) < 0) + goto out_fail_accept; + + if (!b_is_null(input)) { + /* Xfer the input buffer to the request channel. will + * than point to BUF_NULL. From this point, it is the stream + * responsibility to release it. + */ + s->req.buf = *input; + *input = BUF_NULL; + s->req.total = (IS_HTX_STRM(s) ? htxbuf(&s->req.buf)->data : b_data(&s->req.buf)); + sc_ep_report_read_activity(s->scf); + } + + /* it is important not to call the wakeup function directly but to + * pass through task_wakeup(), because this one knows how to apply + * priorities to tasks. Using multi thread we must be sure that + * stream is fully initialized before calling task_wakeup. So + * the caller must handle the task_wakeup + */ + DBG_TRACE_LEAVE(STRM_EV_STRM_NEW, s); + task_wakeup(s->task, TASK_WOKEN_INIT); + return s; + + /* Error unrolling */ + out_fail_accept: + flt_stream_release(s, 0); + LIST_DELETE(&s->list); + sc_free(s->scb); + out_fail_alloc_scb: + out_fail_attach_scf: + task_destroy(t); + out_fail_alloc: + if (s) + pool_free(pool_head_stk_ctr, s->stkctr); + pool_free(pool_head_stream, s); + DBG_TRACE_DEVEL("leaving on error", STRM_EV_STRM_NEW|STRM_EV_STRM_ERR); + return NULL; +} + +/* + * frees the context associated to a stream. It must have been removed first. + */ +void stream_free(struct stream *s) +{ + struct session *sess = strm_sess(s); + struct proxy *fe = sess->fe; + struct bref *bref, *back; + int i; + + DBG_TRACE_POINT(STRM_EV_STRM_FREE, s); + + /* detach the stream from its own task before even releasing it so + * that walking over a task list never exhibits a dying stream. + */ + s->task->context = NULL; + __ha_barrier_store(); + + pendconn_free(s); + + if (objt_server(s->target)) { /* there may be requests left pending in queue */ + if (s->flags & SF_CURR_SESS) { + s->flags &= ~SF_CURR_SESS; + _HA_ATOMIC_DEC(&__objt_server(s->target)->cur_sess); + } + if (may_dequeue_tasks(__objt_server(s->target), s->be)) + process_srv_queue(__objt_server(s->target)); + } + + if (unlikely(s->srv_conn)) { + /* the stream still has a reserved slot on a server, but + * it should normally be only the same as the one above, + * so this should not happen in fact. + */ + sess_change_server(s, NULL); + } + + /* We may still be present in the buffer wait queue */ + if (LIST_INLIST(&s->buffer_wait.list)) + LIST_DEL_INIT(&s->buffer_wait.list); + + if (s->req.buf.size || s->res.buf.size) { + int count = !!s->req.buf.size + !!s->res.buf.size; + + b_free(&s->req.buf); + b_free(&s->res.buf); + offer_buffers(NULL, count); + } + + pool_free(pool_head_uniqueid, s->unique_id.ptr); + s->unique_id = IST_NULL; + + flt_stream_stop(s); + flt_stream_release(s, 0); + + hlua_ctx_destroy(s->hlua); + s->hlua = NULL; + if (s->txn) + http_destroy_txn(s); + + /* ensure the client-side transport layer is destroyed */ + /* Be sure it is useless !! */ + /* if (cli_cs) */ + /* cs_close(cli_cs); */ + + for (i = 0; i < s->store_count; i++) { + if (!s->store[i].ts) + continue; + stksess_free(s->store[i].table, s->store[i].ts); + s->store[i].ts = NULL; + } + + if (s->resolv_ctx.requester) { + __decl_thread(struct resolvers *resolvers = s->resolv_ctx.parent->arg.resolv.resolvers); + + HA_SPIN_LOCK(DNS_LOCK, &resolvers->lock); + ha_free(&s->resolv_ctx.hostname_dn); + s->resolv_ctx.hostname_dn_len = 0; + resolv_unlink_resolution(s->resolv_ctx.requester); + HA_SPIN_UNLOCK(DNS_LOCK, &resolvers->lock); + + pool_free(resolv_requester_pool, s->resolv_ctx.requester); + s->resolv_ctx.requester = NULL; + } + + if (fe) { + if (s->req_cap) { + struct cap_hdr *h; + for (h = fe->req_cap; h; h = h->next) + pool_free(h->pool, s->req_cap[h->index]); + pool_free(fe->req_cap_pool, s->req_cap); + } + + if (s->res_cap) { + struct cap_hdr *h; + for (h = fe->rsp_cap; h; h = h->next) + pool_free(h->pool, s->res_cap[h->index]); + pool_free(fe->rsp_cap_pool, s->res_cap); + } + } + + /* Cleanup all variable contexts. */ + if (!LIST_ISEMPTY(&s->vars_txn.head)) + vars_prune(&s->vars_txn, s->sess, s); + if (!LIST_ISEMPTY(&s->vars_reqres.head)) + vars_prune(&s->vars_reqres, s->sess, s); + + stream_store_counters(s); + pool_free(pool_head_stk_ctr, s->stkctr); + + list_for_each_entry_safe(bref, back, &s->back_refs, users) { + /* we have to unlink all watchers. We must not relink them if + * this stream was the last one in the list. This is safe to do + * here because we're touching our thread's list so we know + * that other streams are not active, and the watchers will + * only touch their node under thread isolation. + */ + LIST_DEL_INIT(&bref->users); + if (s->list.n != &th_ctx->streams) + LIST_APPEND(&LIST_ELEM(s->list.n, struct stream *, list)->back_refs, &bref->users); + bref->ref = s->list.n; + __ha_barrier_store(); + } + LIST_DELETE(&s->list); + + sc_destroy(s->scb); + sc_destroy(s->scf); + + pool_free(pool_head_stream, s); + + /* We may want to free the maximum amount of pools if the proxy is stopping */ + if (fe && unlikely(fe->flags & (PR_FL_DISABLED|PR_FL_STOPPED))) { + pool_flush(pool_head_buffer); + pool_flush(pool_head_http_txn); + pool_flush(pool_head_requri); + pool_flush(pool_head_capture); + pool_flush(pool_head_stream); + pool_flush(pool_head_session); + pool_flush(pool_head_connection); + pool_flush(pool_head_pendconn); + pool_flush(fe->req_cap_pool); + pool_flush(fe->rsp_cap_pool); + } +} + + +/* Allocates a work buffer for stream . It is meant to be called inside + * process_stream(). It will only allocate the side needed for the function + * to work fine, which is the response buffer so that an error message may be + * built and returned. Response buffers may be allocated from the reserve, this + * is critical to ensure that a response may always flow and will never block a + * server from releasing a connection. Returns 0 in case of failure, non-zero + * otherwise. + */ +static int stream_alloc_work_buffer(struct stream *s) +{ + if (b_alloc(&s->res.buf)) + return 1; + return 0; +} + +/* releases unused buffers after processing. Typically used at the end of the + * update() functions. It will try to wake up as many tasks/applets as the + * number of buffers that it releases. In practice, most often streams are + * blocked on a single buffer, so it makes sense to try to wake two up when two + * buffers are released at once. + */ +void stream_release_buffers(struct stream *s) +{ + int offer = 0; + + if (c_size(&s->req) && c_empty(&s->req)) { + offer++; + b_free(&s->req.buf); + } + if (c_size(&s->res) && c_empty(&s->res)) { + offer++; + b_free(&s->res.buf); + } + + /* if we're certain to have at least 1 buffer available, and there is + * someone waiting, we can wake up a waiter and offer them. + */ + if (offer) + offer_buffers(s, offer); +} + +void stream_process_counters(struct stream *s) +{ + struct session *sess = s->sess; + unsigned long long bytes; + int i; + + bytes = s->req.total - s->logs.bytes_in; + s->logs.bytes_in = s->req.total; + if (bytes) { + _HA_ATOMIC_ADD(&sess->fe->fe_counters.bytes_in, bytes); + _HA_ATOMIC_ADD(&s->be->be_counters.bytes_in, bytes); + + if (objt_server(s->target)) + _HA_ATOMIC_ADD(&__objt_server(s->target)->counters.bytes_in, bytes); + + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_ADD(&sess->listener->counters->bytes_in, bytes); + + for (i = 0; i < global.tune.nb_stk_ctr; i++) { + if (!stkctr_inc_bytes_in_ctr(&s->stkctr[i], bytes)) + stkctr_inc_bytes_in_ctr(&sess->stkctr[i], bytes); + } + } + + bytes = s->res.total - s->logs.bytes_out; + s->logs.bytes_out = s->res.total; + if (bytes) { + _HA_ATOMIC_ADD(&sess->fe->fe_counters.bytes_out, bytes); + _HA_ATOMIC_ADD(&s->be->be_counters.bytes_out, bytes); + + if (objt_server(s->target)) + _HA_ATOMIC_ADD(&__objt_server(s->target)->counters.bytes_out, bytes); + + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_ADD(&sess->listener->counters->bytes_out, bytes); + + for (i = 0; i < global.tune.nb_stk_ctr; i++) { + if (!stkctr_inc_bytes_out_ctr(&s->stkctr[i], bytes)) + stkctr_inc_bytes_out_ctr(&sess->stkctr[i], bytes); + } + } +} + +/* Abort processing on the both channels in same time */ +void stream_abort(struct stream *s) +{ + channel_abort(&s->req); + channel_abort(&s->res); +} + +/* + * Returns a message to the client ; the connection is shut down for read, + * and the request is cleared so that no server connection can be initiated. + * The buffer is marked for read shutdown on the other side to protect the + * message, and the buffer write is enabled. The message is contained in a + * "chunk". If it is null, then an empty message is used. The reply buffer does + * not need to be empty before this, and its contents will not be overwritten. + * The primary goal of this function is to return error messages to a client. + */ +void stream_retnclose(struct stream *s, const struct buffer *msg) +{ + struct channel *ic = &s->req; + struct channel *oc = &s->res; + + channel_auto_read(ic); + channel_abort(ic); + channel_erase(ic); + channel_truncate(oc); + + if (likely(msg && msg->data)) + co_inject(oc, msg->area, msg->data); + + channel_auto_read(oc); + channel_auto_close(oc); + sc_schedule_abort(s->scb); +} + +int stream_set_timeout(struct stream *s, enum act_timeout_name name, int timeout) +{ + switch (name) { + case ACT_TIMEOUT_CLIENT: + s->scf->ioto = timeout; + return 1; + + case ACT_TIMEOUT_SERVER: + s->scb->ioto = timeout; + return 1; + + case ACT_TIMEOUT_TUNNEL: + s->tunnel_timeout = timeout; + return 1; + + default: + return 0; + } +} + +/* + * This function handles the transition between the SC_ST_CON state and the + * SC_ST_EST state. It must only be called after switching from SC_ST_CON (or + * SC_ST_INI or SC_ST_RDY) to SC_ST_EST, but only when a ->proto is defined. + * Note that it will switch the interface to SC_ST_DIS if we already have + * the SC_FL_ABRT_DONE flag, it means we were able to forward the request, and + * receive the response, before process_stream() had the opportunity to + * make the switch from SC_ST_CON to SC_ST_EST. When that happens, we want + * to go through back_establish() anyway, to make sure the analysers run. + * Timeouts are cleared. Error are reported on the channel so that analysers + * can handle them. + */ +void back_establish(struct stream *s) +{ + struct connection *conn = sc_conn(s->scb); + struct channel *req = &s->req; + struct channel *rep = &s->res; + + DBG_TRACE_ENTER(STRM_EV_STRM_PROC|STRM_EV_CS_ST, s); + /* First, centralize the timers information, and clear any irrelevant + * timeout. + */ + s->logs.t_connect = ns_to_ms(now_ns - s->logs.accept_ts); + s->conn_exp = TICK_ETERNITY; + s->flags &= ~SF_CONN_EXP; + + /* errors faced after sending data need to be reported */ + if ((s->scb->flags & SC_FL_ERROR) && req->flags & CF_WROTE_DATA) { + s->req.flags |= CF_WRITE_EVENT; + s->res.flags |= CF_READ_EVENT; + s->conn_err_type = STRM_ET_DATA_ERR; + DBG_TRACE_STATE("read/write error", STRM_EV_STRM_PROC|STRM_EV_CS_ST|STRM_EV_STRM_ERR, s); + } + + if (objt_server(s->target)) + health_adjust(__objt_server(s->target), HANA_STATUS_L4_OK); + + if (!IS_HTX_STRM(s)) { /* let's allow immediate data connection in this case */ + /* if the user wants to log as soon as possible, without counting + * bytes from the server, then this is the right moment. */ + if (!LIST_ISEMPTY(&strm_fe(s)->logformat) && !(s->logs.logwait & LW_BYTES)) { + /* note: no pend_pos here, session is established */ + s->logs.t_close = s->logs.t_connect; /* to get a valid end date */ + s->do_log(s); + } + } + else { + s->scb->flags |= SC_FL_RCV_ONCE; /* a single read is enough to get response headers */ + } + + rep->analysers |= strm_fe(s)->fe_rsp_ana | s->be->be_rsp_ana; + + se_have_more_data(s->scb->sedesc); + rep->flags |= CF_READ_EVENT; /* producer is now attached */ + sc_ep_report_read_activity(s->scb); + if (conn) { + /* real connections have timeouts + * if already defined, it means that a set-timeout rule has + * been executed so do not overwrite them + */ + if (!tick_isset(s->scb->ioto)) + s->scb->ioto = s->be->timeout.server; + if (!tick_isset(s->tunnel_timeout)) + s->tunnel_timeout = s->be->timeout.tunnel; + + /* The connection is now established, try to read data from the + * underlying layer, and subscribe to recv events. We use a + * delayed recv here to give a chance to the data to flow back + * by the time we process other tasks. + */ + sc_chk_rcv(s->scb); + } + /* If we managed to get the whole response, and we don't have anything + * left to send, or can't, switch to SC_ST_DIS now. */ + if ((s->scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) || (s->scf->flags & SC_FL_SHUT_DONE)) { + s->scb->state = SC_ST_DIS; + DBG_TRACE_STATE("response channel shutdwn for read/write", STRM_EV_STRM_PROC|STRM_EV_CS_ST|STRM_EV_STRM_ERR, s); + } + + DBG_TRACE_LEAVE(STRM_EV_STRM_PROC|STRM_EV_CS_ST, s); +} + +/* Set correct stream termination flags in case no analyser has done it. It + * also counts a failed request if the server state has not reached the request + * stage. + */ +void sess_set_term_flags(struct stream *s) +{ + if (!(s->flags & SF_FINST_MASK)) { + if (s->scb->state == SC_ST_INI) { + /* anything before REQ in fact */ + _HA_ATOMIC_INC(&strm_fe(s)->fe_counters.failed_req); + if (strm_li(s) && strm_li(s)->counters) + _HA_ATOMIC_INC(&strm_li(s)->counters->failed_req); + + s->flags |= SF_FINST_R; + } + else if (s->scb->state == SC_ST_QUE) + s->flags |= SF_FINST_Q; + else if (sc_state_in(s->scb->state, SC_SB_REQ|SC_SB_TAR|SC_SB_ASS|SC_SB_CON|SC_SB_CER|SC_SB_RDY)) + s->flags |= SF_FINST_C; + else if (s->scb->state == SC_ST_EST || s->prev_conn_state == SC_ST_EST) + s->flags |= SF_FINST_D; + else + s->flags |= SF_FINST_L; + } +} + +/* This function parses the use-service action ruleset. It executes + * the associated ACL and set an applet as a stream or txn final node. + * it returns ACT_RET_ERR if an error occurs, the proxy left in + * consistent state. It returns ACT_RET_STOP in success case because + * use-service must be a terminal action. Returns ACT_RET_YIELD + * if the initialisation function require more data. + */ +enum act_return process_use_service(struct act_rule *rule, struct proxy *px, + struct session *sess, struct stream *s, int flags) + +{ + struct appctx *appctx; + + /* Initialises the applet if it is required. */ + if (flags & ACT_OPT_FIRST) { + /* Register applet. this function schedules the applet. */ + s->target = &rule->applet.obj_type; + appctx = sc_applet_create(s->scb, objt_applet(s->target)); + if (unlikely(!appctx)) + return ACT_RET_ERR; + + /* Finish initialisation of the context. */ + appctx->rule = rule; + if (appctx_init(appctx) == -1) + return ACT_RET_ERR; + } + else + appctx = __sc_appctx(s->scb); + + if (rule->from != ACT_F_HTTP_REQ) { + if (sess->fe == s->be) /* report it if the request was intercepted by the frontend */ + _HA_ATOMIC_INC(&sess->fe->fe_counters.intercepted_req); + + /* The flag SF_ASSIGNED prevent from server assignment. */ + s->flags |= SF_ASSIGNED; + } + + /* Now we can schedule the applet. */ + applet_need_more_data(appctx); + appctx_wakeup(appctx); + return ACT_RET_STOP; +} + +/* This stream analyser checks the switching rules and changes the backend + * if appropriate. The default_backend rule is also considered, then the + * target backend's forced persistence rules are also evaluated last if any. + * It returns 1 if the processing can continue on next analysers, or zero if it + * either needs more data or wants to immediately abort the request. + */ +static int process_switching_rules(struct stream *s, struct channel *req, int an_bit) +{ + struct persist_rule *prst_rule; + struct session *sess = s->sess; + struct proxy *fe = sess->fe; + + req->analysers &= ~an_bit; + req->analyse_exp = TICK_ETERNITY; + + DBG_TRACE_ENTER(STRM_EV_STRM_ANA, s); + + /* now check whether we have some switching rules for this request */ + if (!(s->flags & SF_BE_ASSIGNED)) { + struct switching_rule *rule; + + list_for_each_entry(rule, &fe->switching_rules, list) { + int ret = 1; + + if (rule->cond) { + ret = acl_exec_cond(rule->cond, fe, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL); + ret = acl_pass(ret); + if (rule->cond->pol == ACL_COND_UNLESS) + ret = !ret; + } + + if (ret) { + /* If the backend name is dynamic, try to resolve the name. + * If we can't resolve the name, or if any error occurs, break + * the loop and fallback to the default backend. + */ + struct proxy *backend = NULL; + + if (rule->dynamic) { + struct buffer *tmp; + + tmp = alloc_trash_chunk(); + if (!tmp) + goto sw_failed; + + if (build_logline(s, tmp->area, tmp->size, &rule->be.expr)) + backend = proxy_be_by_name(tmp->area); + + free_trash_chunk(tmp); + tmp = NULL; + + if (!backend) + break; + } + else + backend = rule->be.backend; + + if (!stream_set_backend(s, backend)) + goto sw_failed; + break; + } + } + + /* To ensure correct connection accounting on the backend, we + * have to assign one if it was not set (eg: a listen). This + * measure also takes care of correctly setting the default + * backend if any. Don't do anything if an upgrade is already in + * progress. + */ + if (!(s->flags & (SF_BE_ASSIGNED|SF_IGNORE))) + if (!stream_set_backend(s, fe->defbe.be ? fe->defbe.be : s->be)) + goto sw_failed; + + /* No backend assigned but no error reported. It happens when a + * TCP stream is upgraded to HTTP/2. + */ + if ((s->flags & (SF_BE_ASSIGNED|SF_IGNORE)) == SF_IGNORE) { + DBG_TRACE_DEVEL("leaving with no backend because of a destructive upgrade", STRM_EV_STRM_ANA, s); + return 0; + } + + } + + /* we don't want to run the TCP or HTTP filters again if the backend has not changed */ + if (fe == s->be) { + s->req.analysers &= ~AN_REQ_INSPECT_BE; + s->req.analysers &= ~AN_REQ_HTTP_PROCESS_BE; + s->req.analysers &= ~AN_REQ_FLT_START_BE; + } + + /* as soon as we know the backend, we must check if we have a matching forced or ignored + * persistence rule, and report that in the stream. + */ + list_for_each_entry(prst_rule, &s->be->persist_rules, list) { + int ret = 1; + + if (prst_rule->cond) { + ret = acl_exec_cond(prst_rule->cond, s->be, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL); + ret = acl_pass(ret); + if (prst_rule->cond->pol == ACL_COND_UNLESS) + ret = !ret; + } + + if (ret) { + /* no rule, or the rule matches */ + if (prst_rule->type == PERSIST_TYPE_FORCE) { + s->flags |= SF_FORCE_PRST; + } else { + s->flags |= SF_IGNORE_PRST; + } + break; + } + } + + DBG_TRACE_LEAVE(STRM_EV_STRM_ANA, s); + return 1; + + sw_failed: + /* immediately abort this request in case of allocation failure */ + stream_abort(s); + + if (!(s->flags & SF_ERR_MASK)) + s->flags |= SF_ERR_RESOURCE; + if (!(s->flags & SF_FINST_MASK)) + s->flags |= SF_FINST_R; + + if (s->txn) + s->txn->status = 500; + s->req.analysers &= AN_REQ_FLT_END; + s->req.analyse_exp = TICK_ETERNITY; + DBG_TRACE_DEVEL("leaving on error", STRM_EV_STRM_ANA|STRM_EV_STRM_ERR, s); + return 0; +} + +/* This stream analyser works on a request. It applies all use-server rules on + * it then returns 1. The data must already be present in the buffer otherwise + * they won't match. It always returns 1. + */ +static int process_server_rules(struct stream *s, struct channel *req, int an_bit) +{ + struct proxy *px = s->be; + struct session *sess = s->sess; + struct server_rule *rule; + + DBG_TRACE_ENTER(STRM_EV_STRM_ANA, s); + + if (!(s->flags & SF_ASSIGNED)) { + list_for_each_entry(rule, &px->server_rules, list) { + int ret; + + ret = acl_exec_cond(rule->cond, s->be, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL); + ret = acl_pass(ret); + if (rule->cond->pol == ACL_COND_UNLESS) + ret = !ret; + + if (ret) { + struct server *srv; + + if (rule->dynamic) { + struct buffer *tmp = get_trash_chunk(); + + if (!build_logline(s, tmp->area, tmp->size, &rule->expr)) + break; + + srv = findserver(s->be, tmp->area); + if (!srv) + break; + } + else + srv = rule->srv.ptr; + + if ((srv->cur_state != SRV_ST_STOPPED) || + (px->options & PR_O_PERSIST) || + (s->flags & SF_FORCE_PRST)) { + s->flags |= SF_DIRECT | SF_ASSIGNED; + s->target = &srv->obj_type; + break; + } + /* if the server is not UP, let's go on with next rules + * just in case another one is suited. + */ + } + } + } + + req->analysers &= ~an_bit; + req->analyse_exp = TICK_ETERNITY; + DBG_TRACE_LEAVE(STRM_EV_STRM_ANA, s); + return 1; +} + +static inline void sticking_rule_find_target(struct stream *s, + struct stktable *t, struct stksess *ts) +{ + struct proxy *px = s->be; + struct eb32_node *node; + struct dict_entry *de; + void *ptr; + struct server *srv; + + /* Look for the server name previously stored in stick-table */ + HA_RWLOCK_RDLOCK(STK_SESS_LOCK, &ts->lock); + ptr = __stktable_data_ptr(t, ts, STKTABLE_DT_SERVER_KEY); + de = stktable_data_cast(ptr, std_t_dict); + HA_RWLOCK_RDUNLOCK(STK_SESS_LOCK, &ts->lock); + + if (de) { + struct ebpt_node *node; + + if (t->server_key_type == STKTABLE_SRV_NAME) { + node = ebis_lookup(&px->conf.used_server_name, de->value.key); + if (node) { + srv = container_of(node, struct server, conf.name); + goto found; + } + } else if (t->server_key_type == STKTABLE_SRV_ADDR) { + HA_RWLOCK_RDLOCK(PROXY_LOCK, &px->lock); + node = ebis_lookup(&px->used_server_addr, de->value.key); + HA_RWLOCK_RDUNLOCK(PROXY_LOCK, &px->lock); + if (node) { + srv = container_of(node, struct server, addr_node); + goto found; + } + } + } + + /* Look for the server ID */ + HA_RWLOCK_RDLOCK(STK_SESS_LOCK, &ts->lock); + ptr = __stktable_data_ptr(t, ts, STKTABLE_DT_SERVER_ID); + node = eb32_lookup(&px->conf.used_server_id, stktable_data_cast(ptr, std_t_sint)); + HA_RWLOCK_RDUNLOCK(STK_SESS_LOCK, &ts->lock); + + if (!node) + return; + + srv = container_of(node, struct server, conf.id); + found: + if ((srv->cur_state != SRV_ST_STOPPED) || + (px->options & PR_O_PERSIST) || (s->flags & SF_FORCE_PRST)) { + s->flags |= SF_DIRECT | SF_ASSIGNED; + s->target = &srv->obj_type; + } +} + +/* This stream analyser works on a request. It applies all sticking rules on + * it then returns 1. The data must already be present in the buffer otherwise + * they won't match. It always returns 1. + */ +static int process_sticking_rules(struct stream *s, struct channel *req, int an_bit) +{ + struct proxy *px = s->be; + struct session *sess = s->sess; + struct sticking_rule *rule; + + DBG_TRACE_ENTER(STRM_EV_STRM_ANA, s); + + list_for_each_entry(rule, &px->sticking_rules, list) { + int ret = 1 ; + int i; + + /* Only the first stick store-request of each table is applied + * and other ones are ignored. The purpose is to allow complex + * configurations which look for multiple entries by decreasing + * order of precision and to stop at the first which matches. + * An example could be a store of the IP address from an HTTP + * header first, then from the source if not found. + */ + if (rule->flags & STK_IS_STORE) { + for (i = 0; i < s->store_count; i++) { + if (rule->table.t == s->store[i].table) + break; + } + + if (i != s->store_count) + continue; + } + + if (rule->cond) { + ret = acl_exec_cond(rule->cond, px, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL); + ret = acl_pass(ret); + if (rule->cond->pol == ACL_COND_UNLESS) + ret = !ret; + } + + if (ret) { + struct stktable_key *key; + + key = stktable_fetch_key(rule->table.t, px, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL, rule->expr, NULL); + if (!key) + continue; + + if (rule->flags & STK_IS_MATCH) { + struct stksess *ts; + + if ((ts = stktable_lookup_key(rule->table.t, key)) != NULL) { + if (!(s->flags & SF_ASSIGNED)) + sticking_rule_find_target(s, rule->table.t, ts); + stktable_touch_local(rule->table.t, ts, 1); + } + } + if (rule->flags & STK_IS_STORE) { + if (s->store_count < (sizeof(s->store) / sizeof(s->store[0]))) { + struct stksess *ts; + + ts = stksess_new(rule->table.t, key); + if (ts) { + s->store[s->store_count].table = rule->table.t; + s->store[s->store_count++].ts = ts; + } + } + } + } + } + + req->analysers &= ~an_bit; + req->analyse_exp = TICK_ETERNITY; + DBG_TRACE_LEAVE(STRM_EV_STRM_ANA, s); + return 1; +} + +/* This stream analyser works on a response. It applies all store rules on it + * then returns 1. The data must already be present in the buffer otherwise + * they won't match. It always returns 1. + */ +static int process_store_rules(struct stream *s, struct channel *rep, int an_bit) +{ + struct proxy *px = s->be; + struct session *sess = s->sess; + struct sticking_rule *rule; + int i; + int nbreq = s->store_count; + + DBG_TRACE_ENTER(STRM_EV_STRM_ANA, s); + + list_for_each_entry(rule, &px->storersp_rules, list) { + int ret = 1 ; + + /* Only the first stick store-response of each table is applied + * and other ones are ignored. The purpose is to allow complex + * configurations which look for multiple entries by decreasing + * order of precision and to stop at the first which matches. + * An example could be a store of a set-cookie value, with a + * fallback to a parameter found in a 302 redirect. + * + * The store-response rules are not allowed to override the + * store-request rules for the same table, but they may coexist. + * Thus we can have up to one store-request entry and one store- + * response entry for the same table at any time. + */ + for (i = nbreq; i < s->store_count; i++) { + if (rule->table.t == s->store[i].table) + break; + } + + /* skip existing entries for this table */ + if (i < s->store_count) + continue; + + if (rule->cond) { + ret = acl_exec_cond(rule->cond, px, sess, s, SMP_OPT_DIR_RES|SMP_OPT_FINAL); + ret = acl_pass(ret); + if (rule->cond->pol == ACL_COND_UNLESS) + ret = !ret; + } + + if (ret) { + struct stktable_key *key; + + key = stktable_fetch_key(rule->table.t, px, sess, s, SMP_OPT_DIR_RES|SMP_OPT_FINAL, rule->expr, NULL); + if (!key) + continue; + + if (s->store_count < (sizeof(s->store) / sizeof(s->store[0]))) { + struct stksess *ts; + + ts = stksess_new(rule->table.t, key); + if (ts) { + s->store[s->store_count].table = rule->table.t; + s->store[s->store_count++].ts = ts; + } + } + } + } + + /* process store request and store response */ + for (i = 0; i < s->store_count; i++) { + struct stksess *ts; + void *ptr; + char *key; + struct dict_entry *de; + struct stktable *t = s->store[i].table; + + if (!objt_server(s->target) || (__objt_server(s->target)->flags & SRV_F_NON_STICK)) { + stksess_free(s->store[i].table, s->store[i].ts); + s->store[i].ts = NULL; + continue; + } + + ts = stktable_set_entry(t, s->store[i].ts); + if (ts != s->store[i].ts) { + /* the entry already existed, we can free ours */ + stksess_free(t, s->store[i].ts); + } + s->store[i].ts = NULL; + + if (t->server_key_type == STKTABLE_SRV_NAME) + key = __objt_server(s->target)->id; + else if (t->server_key_type == STKTABLE_SRV_ADDR) + key = __objt_server(s->target)->addr_node.key; + else + key = NULL; + + HA_RWLOCK_WRLOCK(STK_SESS_LOCK, &ts->lock); + ptr = __stktable_data_ptr(t, ts, STKTABLE_DT_SERVER_ID); + stktable_data_cast(ptr, std_t_sint) = __objt_server(s->target)->puid; + + if (key) { + de = dict_insert(&server_key_dict, key); + if (de) { + ptr = __stktable_data_ptr(t, ts, STKTABLE_DT_SERVER_KEY); + stktable_data_cast(ptr, std_t_dict) = de; + } + } + + HA_RWLOCK_WRUNLOCK(STK_SESS_LOCK, &ts->lock); + + stktable_touch_local(t, ts, 1); + } + s->store_count = 0; /* everything is stored */ + + rep->analysers &= ~an_bit; + rep->analyse_exp = TICK_ETERNITY; + + DBG_TRACE_LEAVE(STRM_EV_STRM_ANA, s); + return 1; +} + +/* Set the stream to HTTP mode, if necessary. The minimal request HTTP analysers + * are set and the client mux is upgraded. It returns 1 if the stream processing + * may continue or 0 if it should be stopped. It happens on error or if the + * upgrade required a new stream. The mux protocol may be specified. + */ +int stream_set_http_mode(struct stream *s, const struct mux_proto_list *mux_proto) +{ + struct stconn *sc = s->scf; + struct connection *conn; + + /* Already an HTTP stream */ + if (IS_HTX_STRM(s)) + return 1; + + s->req.analysers |= AN_REQ_WAIT_HTTP|AN_REQ_HTTP_PROCESS_FE; + + if (unlikely(!s->txn && !http_create_txn(s))) + return 0; + + conn = sc_conn(sc); + if (conn) { + se_have_more_data(s->scf->sedesc); + /* Make sure we're unsubscribed, the the new + * mux will probably want to subscribe to + * the underlying XPRT + */ + if (s->scf->wait_event.events) + conn->mux->unsubscribe(sc, s->scf->wait_event.events, &(s->scf->wait_event)); + + if (conn->mux->flags & MX_FL_NO_UPG) + return 0; + + sc_conn_prepare_endp_upgrade(sc); + if (conn_upgrade_mux_fe(conn, sc, &s->req.buf, + (mux_proto ? mux_proto->token : ist("")), + PROTO_MODE_HTTP) == -1) { + sc_conn_abort_endp_upgrade(sc); + return 0; + } + sc_conn_commit_endp_upgrade(sc); + + s->req.flags &= ~(CF_READ_EVENT|CF_AUTO_CONNECT); + s->req.total = 0; + s->flags |= SF_IGNORE; + if (sc_ep_test(sc, SE_FL_DETACHED)) { + /* If stream connector is detached, it means it was not + * reused by the new mux. Son destroy it, disable + * logging, and abort the stream process. Thus the + * stream will be silently destroyed. The new mux will + * create new streams. + */ + s->logs.logwait = 0; + s->logs.level = 0; + stream_abort(s); + s->req.analysers &= AN_REQ_FLT_END; + s->req.analyse_exp = TICK_ETERNITY; + } + } + + return 1; +} + + +/* Updates at once the channel flags, and timers of both stream connectors of a + * same stream, to complete the work after the analysers, then updates the data + * layer below. This will ensure that any synchronous update performed at the + * data layer will be reflected in the channel flags and/or stream connector. + * Note that this does not change the stream connector's current state, though + * it updates the previous state to the current one. + */ +void stream_update_both_sc(struct stream *s) +{ + struct stconn *scf = s->scf; + struct stconn *scb = s->scb; + struct channel *req = &s->req; + struct channel *res = &s->res; + + req->flags &= ~(CF_READ_EVENT|CF_WRITE_EVENT); + res->flags &= ~(CF_READ_EVENT|CF_WRITE_EVENT); + + s->prev_conn_state = scb->state; + + /* let's recompute both sides states */ + if (sc_state_in(scf->state, SC_SB_RDY|SC_SB_EST)) + sc_update(scf); + + if (sc_state_in(scb->state, SC_SB_RDY|SC_SB_EST)) + sc_update(scb); + + /* stream connectors are processed outside of process_stream() and must be + * handled at the latest moment. + */ + if (sc_appctx(scf)) { + if (sc_is_recv_allowed(scf) || sc_is_send_allowed(scf)) + appctx_wakeup(__sc_appctx(scf)); + } + if (sc_appctx(scb)) { + if (sc_is_recv_allowed(scb) || sc_is_send_allowed(scb)) + appctx_wakeup(__sc_appctx(scb)); + } +} + +/* check SC and channel timeouts, and close the corresponding stream connectors + * for future reads or writes. + * Note: this will also concern upper layers but we do not touch any other + * flag. We must be careful and correctly detect state changes when calling + * them. + */ +static void stream_handle_timeouts(struct stream *s) +{ + stream_check_conn_timeout(s); + + sc_check_timeouts(s->scf); + channel_check_timeout(&s->req); + sc_check_timeouts(s->scb); + channel_check_timeout(&s->res); + + if (unlikely(!(s->scb->flags & SC_FL_SHUT_DONE) && (s->req.flags & CF_WRITE_TIMEOUT))) { + s->scb->flags |= SC_FL_NOLINGER; + sc_shutdown(s->scb); + } + + if (unlikely(!(s->scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && (s->req.flags & CF_READ_TIMEOUT))) { + if (s->scf->flags & SC_FL_NOHALF) + s->scf->flags |= SC_FL_NOLINGER; + sc_abort(s->scf); + } + if (unlikely(!(s->scf->flags & SC_FL_SHUT_DONE) && (s->res.flags & CF_WRITE_TIMEOUT))) { + s->scf->flags |= SC_FL_NOLINGER; + sc_shutdown(s->scf); + } + + if (unlikely(!(s->scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && (s->res.flags & CF_READ_TIMEOUT))) { + if (s->scb->flags & SC_FL_NOHALF) + s->scb->flags |= SC_FL_NOLINGER; + sc_abort(s->scb); + } + + if (HAS_FILTERS(s)) + flt_stream_check_timeouts(s); +} + +/* if the current task's wake_date was set, it's being profiled, thus we may + * report latencies and CPU usages in logs, so it's desirable to update the + * latency when entering process_stream(). + */ +static void stream_cond_update_cpu_latency(struct stream *s) +{ + uint32_t lat = th_ctx->sched_call_date - th_ctx->sched_wake_date; + + s->lat_time += lat; +} + +/* if the current task's wake_date was set, it's being profiled, thus we may + * report latencies and CPU usages in logs, so it's desirable to do that before + * logging in order to report accurate CPU usage. In this case we count that + * final part and reset the wake date so that the scheduler doesn't do it a + * second time, and by doing so we also avoid an extra call to clock_gettime(). + * The CPU usage will be off by the little time needed to run over stream_free() + * but that's only marginal. + */ +static void stream_cond_update_cpu_usage(struct stream *s) +{ + uint32_t cpu; + + /* stats are only registered for non-zero wake dates */ + if (likely(!th_ctx->sched_wake_date)) + return; + + cpu = (uint32_t)now_mono_time() - th_ctx->sched_call_date; + s->cpu_time += cpu; + HA_ATOMIC_ADD(&th_ctx->sched_profile_entry->cpu_time, cpu); + th_ctx->sched_wake_date = 0; +} + +/* this functions is called directly by the scheduler for tasks whose + * ->process points to process_stream(), and is used to keep latencies + * and CPU usage measurements accurate. + */ +void stream_update_timings(struct task *t, uint64_t lat, uint64_t cpu) +{ + struct stream *s = t->context; + s->lat_time += lat; + s->cpu_time += cpu; +} + + +/* This macro is very specific to the function below. See the comments in + * process_stream() below to understand the logic and the tests. + */ +#define UPDATE_ANALYSERS(real, list, back, flag) { \ + list = (((list) & ~(flag)) | ~(back)) & (real); \ + back = real; \ + if (!(list)) \ + break; \ + if (((list) ^ ((list) & ((list) - 1))) < (flag)) \ + continue; \ +} + +/* These 2 following macros call an analayzer for the specified channel if the + * right flag is set. The first one is used for "filterable" analyzers. If a + * stream has some registered filters, pre and post analyaze callbacks are + * called. The second are used for other analyzers (AN_REQ/RES_FLT_* and + * AN_REQ/RES_HTTP_XFER_BODY) */ +#define FLT_ANALYZE(strm, chn, fun, list, back, flag, ...) \ + { \ + if ((list) & (flag)) { \ + if (HAS_FILTERS(strm)) { \ + if (!flt_pre_analyze((strm), (chn), (flag))) \ + break; \ + if (!fun((strm), (chn), (flag), ##__VA_ARGS__)) \ + break; \ + if (!flt_post_analyze((strm), (chn), (flag))) \ + break; \ + } \ + else { \ + if (!fun((strm), (chn), (flag), ##__VA_ARGS__)) \ + break; \ + } \ + UPDATE_ANALYSERS((chn)->analysers, (list), \ + (back), (flag)); \ + } \ + } + +#define ANALYZE(strm, chn, fun, list, back, flag, ...) \ + { \ + if ((list) & (flag)) { \ + if (!fun((strm), (chn), (flag), ##__VA_ARGS__)) \ + break; \ + UPDATE_ANALYSERS((chn)->analysers, (list), \ + (back), (flag)); \ + } \ + } + +/* Processes the client, server, request and response jobs of a stream task, + * then puts it back to the wait queue in a clean state, or cleans up its + * resources if it must be deleted. Returns in the date the task wants + * to be woken up, or TICK_ETERNITY. In order not to call all functions for + * nothing too many times, the request and response buffers flags are monitored + * and each function is called only if at least another function has changed at + * least one flag it is interested in. + */ +struct task *process_stream(struct task *t, void *context, unsigned int state) +{ + struct server *srv; + struct stream *s = context; + struct session *sess = s->sess; + unsigned int scf_flags, scb_flags; + unsigned int rqf_last, rpf_last; + unsigned int rq_prod_last, rq_cons_last; + unsigned int rp_cons_last, rp_prod_last; + unsigned int req_ana_back, res_ana_back; + struct channel *req, *res; + struct stconn *scf, *scb; + unsigned int rate; + + DBG_TRACE_ENTER(STRM_EV_STRM_PROC, s); + + activity[tid].stream_calls++; + stream_cond_update_cpu_latency(s); + + req = &s->req; + res = &s->res; + + scf = s->scf; + scb = s->scb; + + /* First, attempt to receive pending data from I/O layers */ + sc_conn_sync_recv(scf); + sc_conn_sync_recv(scb); + + /* Let's check if we're looping without making any progress, e.g. due + * to a bogus analyser or the fact that we're ignoring a read0. The + * call_rate counter only counts calls with no progress made. + */ + if (!((req->flags | res->flags) & (CF_READ_EVENT|CF_WRITE_EVENT))) { + rate = update_freq_ctr(&s->call_rate, 1); + if (rate >= 100000 && s->call_rate.prev_ctr) // make sure to wait at least a full second + stream_dump_and_crash(&s->obj_type, read_freq_ctr(&s->call_rate)); + } + + /* this data may be no longer valid, clear it */ + if (s->txn) + memset(&s->txn->auth, 0, sizeof(s->txn->auth)); + + /* This flag must explicitly be set every time */ + req->flags &= ~CF_WAKE_WRITE; + res->flags &= ~CF_WAKE_WRITE; + + /* Keep a copy of req/rep flags so that we can detect shutdowns */ + rqf_last = req->flags & ~CF_MASK_ANALYSER; + rpf_last = res->flags & ~CF_MASK_ANALYSER; + + /* we don't want the stream connector functions to recursively wake us up */ + scf->flags |= SC_FL_DONT_WAKE; + scb->flags |= SC_FL_DONT_WAKE; + + /* Keep a copy of SC flags */ + scf_flags = scf->flags; + scb_flags = scb->flags; + + /* update pending events */ + s->pending_events |= (state & TASK_WOKEN_ANY); + + /* 1a: Check for low level timeouts if needed. We just set a flag on + * stream connectors when their timeouts have expired. + */ + if (unlikely(s->pending_events & TASK_WOKEN_TIMER)) { + stream_handle_timeouts(s); + + /* Once in a while we're woken up because the task expires. But + * this does not necessarily mean that a timeout has been reached. + * So let's not run a whole stream processing if only an expiration + * timeout needs to be refreshed. + */ + if (!((scf->flags | scb->flags) & (SC_FL_ERROR|SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_SHUT_DONE)) && + !((req->flags | res->flags) & (CF_READ_EVENT|CF_READ_TIMEOUT|CF_WRITE_EVENT|CF_WRITE_TIMEOUT)) && + !(s->flags & SF_CONN_EXP) && + ((s->pending_events & TASK_WOKEN_ANY) == TASK_WOKEN_TIMER)) { + scf->flags &= ~SC_FL_DONT_WAKE; + scb->flags &= ~SC_FL_DONT_WAKE; + goto update_exp_and_leave; + } + } + + resync_stconns: + /* below we may emit error messages so we have to ensure that we have + * our buffers properly allocated. If the allocation failed, an error is + * triggered. + * + * NOTE: An error is returned because the mechanism to queue entities + * waiting for a buffer is totally broken for now. However, this + * part must be refactored. When it will be handled, this part + * must be be reviewed too. + */ + if (!stream_alloc_work_buffer(s)) { + scf->flags |= SC_FL_ERROR; + s->conn_err_type = STRM_ET_CONN_RES; + + scb->flags |= SC_FL_ERROR; + s->conn_err_type = STRM_ET_CONN_RES; + + if (!(s->flags & SF_ERR_MASK)) + s->flags |= SF_ERR_RESOURCE; + sess_set_term_flags(s); + } + + /* 1b: check for low-level errors reported at the stream connector. + * First we check if it's a retryable error (in which case we don't + * want to tell the buffer). Otherwise we report the error one level + * upper by setting flags into the buffers. Note that the side towards + * the client cannot have connect (hence retryable) errors. Also, the + * connection setup code must be able to deal with any type of abort. + */ + srv = objt_server(s->target); + if (unlikely(scf->flags & SC_FL_ERROR)) { + if (sc_state_in(scf->state, SC_SB_EST|SC_SB_DIS)) { + sc_abort(scf); + sc_shutdown(scf); + //sc_report_error(scf); TODO: Be sure it is useless + if (!(req->analysers) && !(res->analysers)) { + _HA_ATOMIC_INC(&s->be->be_counters.cli_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.cli_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->cli_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.cli_aborts); + if (!(s->flags & SF_ERR_MASK)) + s->flags |= SF_ERR_CLICL; + if (!(s->flags & SF_FINST_MASK)) + s->flags |= SF_FINST_D; + } + } + } + + if (unlikely(scb->flags & SC_FL_ERROR)) { + if (sc_state_in(scb->state, SC_SB_EST|SC_SB_DIS)) { + sc_abort(scb); + sc_shutdown(scb); + //sc_report_error(scb); TODO: Be sure it is useless + _HA_ATOMIC_INC(&s->be->be_counters.failed_resp); + if (srv) + _HA_ATOMIC_INC(&srv->counters.failed_resp); + if (!(req->analysers) && !(res->analysers)) { + _HA_ATOMIC_INC(&s->be->be_counters.srv_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.srv_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->srv_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.srv_aborts); + if (!(s->flags & SF_ERR_MASK)) + s->flags |= SF_ERR_SRVCL; + if (!(s->flags & SF_FINST_MASK)) + s->flags |= SF_FINST_D; + } + } + /* note: maybe we should process connection errors here ? */ + } + + if (sc_state_in(scb->state, SC_SB_CON|SC_SB_RDY)) { + /* we were trying to establish a connection on the server side, + * maybe it succeeded, maybe it failed, maybe we timed out, ... + */ + if (scb->state == SC_ST_RDY) + back_handle_st_rdy(s); + else if (s->scb->state == SC_ST_CON) + back_handle_st_con(s); + + if (scb->state == SC_ST_CER) + back_handle_st_cer(s); + else if (scb->state == SC_ST_EST) + back_establish(s); + + /* state is now one of SC_ST_CON (still in progress), SC_ST_EST + * (established), SC_ST_DIS (abort), SC_ST_CLO (last error), + * SC_ST_ASS/SC_ST_TAR/SC_ST_REQ for retryable errors. + */ + } + + rq_prod_last = scf->state; + rq_cons_last = scb->state; + rp_cons_last = scf->state; + rp_prod_last = scb->state; + + /* Check for connection closure */ + DBG_TRACE_POINT(STRM_EV_STRM_PROC, s); + + /* nothing special to be done on client side */ + if (unlikely(scf->state == SC_ST_DIS)) { + scf->state = SC_ST_CLO; + + /* This is needed only when debugging is enabled, to indicate + * client-side close. + */ + if (unlikely((global.mode & MODE_DEBUG) && + (!(global.mode & MODE_QUIET) || + (global.mode & MODE_VERBOSE)))) { + chunk_printf(&trash, "%08x:%s.clicls[%04x:%04x]\n", + s->uniq_id, s->be->id, + (unsigned short)conn_fd(sc_conn(scf)), + (unsigned short)conn_fd(sc_conn(scb))); + DISGUISE(write(1, trash.area, trash.data)); + } + } + + /* When a server-side connection is released, we have to count it and + * check for pending connections on this server. + */ + if (unlikely(scb->state == SC_ST_DIS)) { + scb->state = SC_ST_CLO; + srv = objt_server(s->target); + if (srv) { + if (s->flags & SF_CURR_SESS) { + s->flags &= ~SF_CURR_SESS; + _HA_ATOMIC_DEC(&srv->cur_sess); + } + sess_change_server(s, NULL); + if (may_dequeue_tasks(srv, s->be)) + process_srv_queue(srv); + } + + /* This is needed only when debugging is enabled, to indicate + * server-side close. + */ + if (unlikely((global.mode & MODE_DEBUG) && + (!(global.mode & MODE_QUIET) || + (global.mode & MODE_VERBOSE)))) { + if (s->prev_conn_state == SC_ST_EST) { + chunk_printf(&trash, "%08x:%s.srvcls[%04x:%04x]\n", + s->uniq_id, s->be->id, + (unsigned short)conn_fd(sc_conn(scf)), + (unsigned short)conn_fd(sc_conn(scb))); + DISGUISE(write(1, trash.area, trash.data)); + } + } + } + + /* + * Note: of the transient states (REQ, CER, DIS), only REQ may remain + * at this point. + */ + + resync_request: + /* Analyse request */ + if (((req->flags & ~rqf_last) & CF_MASK_ANALYSER) || + ((scf->flags ^ scf_flags) & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) || + ((scb->flags ^ scb_flags) & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) || + (req->analysers && (scb->flags & SC_FL_SHUT_DONE)) || + scf->state != rq_prod_last || + scb->state != rq_cons_last || + s->pending_events & TASK_WOKEN_MSG) { + unsigned int scf_flags_ana = scf->flags; + unsigned int scb_flags_ana = scb->flags; + + if (sc_state_in(scf->state, SC_SB_EST|SC_SB_DIS|SC_SB_CLO)) { + int max_loops = global.tune.maxpollevents; + unsigned int ana_list; + unsigned int ana_back; + + /* it's up to the analysers to stop new connections, + * disable reading or closing. Note: if an analyser + * disables any of these bits, it is responsible for + * enabling them again when it disables itself, so + * that other analysers are called in similar conditions. + */ + channel_auto_read(req); + channel_auto_connect(req); + channel_auto_close(req); + + /* We will call all analysers for which a bit is set in + * req->analysers, following the bit order from LSB + * to MSB. The analysers must remove themselves from + * the list when not needed. Any analyser may return 0 + * to break out of the loop, either because of missing + * data to take a decision, or because it decides to + * kill the stream. We loop at least once through each + * analyser, and we may loop again if other analysers + * are added in the middle. + * + * We build a list of analysers to run. We evaluate all + * of these analysers in the order of the lower bit to + * the higher bit. This ordering is very important. + * An analyser will often add/remove other analysers, + * including itself. Any changes to itself have no effect + * on the loop. If it removes any other analysers, we + * want those analysers not to be called anymore during + * this loop. If it adds an analyser that is located + * after itself, we want it to be scheduled for being + * processed during the loop. If it adds an analyser + * which is located before it, we want it to switch to + * it immediately, even if it has already been called + * once but removed since. + * + * In order to achieve this, we compare the analyser + * list after the call with a copy of it before the + * call. The work list is fed with analyser bits that + * appeared during the call. Then we compare previous + * work list with the new one, and check the bits that + * appeared. If the lowest of these bits is lower than + * the current bit, it means we have enabled a previous + * analyser and must immediately loop again. + */ + + ana_list = ana_back = req->analysers; + while (ana_list && max_loops--) { + /* Warning! ensure that analysers are always placed in ascending order! */ + ANALYZE (s, req, flt_start_analyze, ana_list, ana_back, AN_REQ_FLT_START_FE); + FLT_ANALYZE(s, req, tcp_inspect_request, ana_list, ana_back, AN_REQ_INSPECT_FE); + FLT_ANALYZE(s, req, http_wait_for_request, ana_list, ana_back, AN_REQ_WAIT_HTTP); + FLT_ANALYZE(s, req, http_wait_for_request_body, ana_list, ana_back, AN_REQ_HTTP_BODY); + FLT_ANALYZE(s, req, http_process_req_common, ana_list, ana_back, AN_REQ_HTTP_PROCESS_FE, sess->fe); + FLT_ANALYZE(s, req, process_switching_rules, ana_list, ana_back, AN_REQ_SWITCHING_RULES); + ANALYZE (s, req, flt_start_analyze, ana_list, ana_back, AN_REQ_FLT_START_BE); + FLT_ANALYZE(s, req, tcp_inspect_request, ana_list, ana_back, AN_REQ_INSPECT_BE); + FLT_ANALYZE(s, req, http_process_req_common, ana_list, ana_back, AN_REQ_HTTP_PROCESS_BE, s->be); + FLT_ANALYZE(s, req, http_process_tarpit, ana_list, ana_back, AN_REQ_HTTP_TARPIT); + FLT_ANALYZE(s, req, process_server_rules, ana_list, ana_back, AN_REQ_SRV_RULES); + FLT_ANALYZE(s, req, http_process_request, ana_list, ana_back, AN_REQ_HTTP_INNER); + FLT_ANALYZE(s, req, tcp_persist_rdp_cookie, ana_list, ana_back, AN_REQ_PRST_RDP_COOKIE); + FLT_ANALYZE(s, req, process_sticking_rules, ana_list, ana_back, AN_REQ_STICKING_RULES); + ANALYZE (s, req, flt_analyze_http_headers, ana_list, ana_back, AN_REQ_FLT_HTTP_HDRS); + ANALYZE (s, req, http_request_forward_body, ana_list, ana_back, AN_REQ_HTTP_XFER_BODY); + ANALYZE (s, req, pcli_wait_for_request, ana_list, ana_back, AN_REQ_WAIT_CLI); + ANALYZE (s, req, flt_xfer_data, ana_list, ana_back, AN_REQ_FLT_XFER_DATA); + ANALYZE (s, req, flt_end_analyze, ana_list, ana_back, AN_REQ_FLT_END); + break; + } + } + + rq_prod_last = scf->state; + rq_cons_last = scb->state; + req->flags &= ~CF_WAKE_ONCE; + rqf_last = req->flags; + scf_flags = (scf_flags & ~(SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) | (scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)); + scb_flags = (scb_flags & ~(SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) | (scb->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)); + + if (((scf->flags ^ scf_flags_ana) & (SC_FL_EOS|SC_FL_ABRT_DONE)) || ((scb->flags ^ scb_flags_ana) & SC_FL_SHUT_DONE)) + goto resync_request; + } + + /* we'll monitor the request analysers while parsing the response, + * because some response analysers may indirectly enable new request + * analysers (eg: HTTP keep-alive). + */ + req_ana_back = req->analysers; + + resync_response: + /* Analyse response */ + + if (((res->flags & ~rpf_last) & CF_MASK_ANALYSER) || + ((scb->flags ^ scb_flags) & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) || + ((scf->flags ^ scf_flags) & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) || + (res->analysers && (scf->flags & SC_FL_SHUT_DONE)) || + scf->state != rp_cons_last || + scb->state != rp_prod_last || + s->pending_events & TASK_WOKEN_MSG) { + unsigned int scb_flags_ana = scb->flags; + unsigned int scf_flags_ana = scf->flags; + + if (sc_state_in(scb->state, SC_SB_EST|SC_SB_DIS|SC_SB_CLO)) { + int max_loops = global.tune.maxpollevents; + unsigned int ana_list; + unsigned int ana_back; + + /* it's up to the analysers to stop disable reading or + * closing. Note: if an analyser disables any of these + * bits, it is responsible for enabling them again when + * it disables itself, so that other analysers are called + * in similar conditions. + */ + channel_auto_read(res); + channel_auto_close(res); + + /* We will call all analysers for which a bit is set in + * res->analysers, following the bit order from LSB + * to MSB. The analysers must remove themselves from + * the list when not needed. Any analyser may return 0 + * to break out of the loop, either because of missing + * data to take a decision, or because it decides to + * kill the stream. We loop at least once through each + * analyser, and we may loop again if other analysers + * are added in the middle. + */ + + ana_list = ana_back = res->analysers; + while (ana_list && max_loops--) { + /* Warning! ensure that analysers are always placed in ascending order! */ + ANALYZE (s, res, flt_start_analyze, ana_list, ana_back, AN_RES_FLT_START_FE); + ANALYZE (s, res, flt_start_analyze, ana_list, ana_back, AN_RES_FLT_START_BE); + FLT_ANALYZE(s, res, tcp_inspect_response, ana_list, ana_back, AN_RES_INSPECT); + FLT_ANALYZE(s, res, http_wait_for_response, ana_list, ana_back, AN_RES_WAIT_HTTP); + FLT_ANALYZE(s, res, process_store_rules, ana_list, ana_back, AN_RES_STORE_RULES); + FLT_ANALYZE(s, res, http_process_res_common, ana_list, ana_back, AN_RES_HTTP_PROCESS_BE, s->be); + ANALYZE (s, res, flt_analyze_http_headers, ana_list, ana_back, AN_RES_FLT_HTTP_HDRS); + ANALYZE (s, res, http_response_forward_body, ana_list, ana_back, AN_RES_HTTP_XFER_BODY); + ANALYZE (s, res, pcli_wait_for_response, ana_list, ana_back, AN_RES_WAIT_CLI); + ANALYZE (s, res, flt_xfer_data, ana_list, ana_back, AN_RES_FLT_XFER_DATA); + ANALYZE (s, res, flt_end_analyze, ana_list, ana_back, AN_RES_FLT_END); + break; + } + } + + rp_cons_last = scf->state; + rp_prod_last = scb->state; + res->flags &= ~CF_WAKE_ONCE; + rpf_last = res->flags; + scb_flags = (scb_flags & ~(SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) | (scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)); + scf_flags = (scf_flags & ~(SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) | (scf->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)); + + if (((scb->flags ^ scb_flags_ana) & (SC_FL_EOS|SC_FL_ABRT_DONE)) || ((scf->flags ^ scf_flags_ana) & SC_FL_SHUT_DONE)) + goto resync_response; + } + + /* we'll monitor the response analysers because some response analysers + * may be enabled/disabled later + */ + res_ana_back = res->analysers; + + /* maybe someone has added some request analysers, so we must check and loop */ + if (req->analysers & ~req_ana_back) + goto resync_request; + + if ((req->flags & ~rqf_last) & CF_MASK_ANALYSER) + goto resync_request; + + /* FIXME: here we should call protocol handlers which rely on + * both buffers. + */ + + + /* + * Now we propagate unhandled errors to the stream. Normally + * we're just in a data phase here since it means we have not + * seen any analyser who could set an error status. + */ + srv = objt_server(s->target); + if (unlikely(!(s->flags & SF_ERR_MASK))) { + if ((scf->flags & SC_FL_ERROR) || req->flags & (CF_READ_TIMEOUT|CF_WRITE_TIMEOUT)) { + /* Report it if the client got an error or a read timeout expired */ + req->analysers &= AN_REQ_FLT_END; + channel_auto_close(req); + if (scf->flags & SC_FL_ERROR) { + _HA_ATOMIC_INC(&s->be->be_counters.cli_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.cli_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->cli_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.cli_aborts); + s->flags |= SF_ERR_CLICL; + } + else if (req->flags & CF_READ_TIMEOUT) { + _HA_ATOMIC_INC(&s->be->be_counters.cli_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.cli_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->cli_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.cli_aborts); + s->flags |= SF_ERR_CLITO; + } + else { + _HA_ATOMIC_INC(&s->be->be_counters.srv_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.srv_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->srv_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.srv_aborts); + s->flags |= SF_ERR_SRVTO; + } + sess_set_term_flags(s); + + /* Abort the request if a client error occurred while + * the backend stream connector is in the SC_ST_INI + * state. It is switched into the SC_ST_CLO state and + * the request channel is erased. */ + if (scb->state == SC_ST_INI) { + s->scb->state = SC_ST_CLO; + channel_abort(req); + if (IS_HTX_STRM(s)) + channel_htx_erase(req, htxbuf(&req->buf)); + else + channel_erase(req); + } + } + else if ((scb->flags & SC_FL_ERROR) || res->flags & (CF_READ_TIMEOUT|CF_WRITE_TIMEOUT)) { + /* Report it if the server got an error or a read timeout expired */ + res->analysers &= AN_RES_FLT_END; + channel_auto_close(res); + if (scb->flags & SC_FL_ERROR) { + _HA_ATOMIC_INC(&s->be->be_counters.srv_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.srv_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->srv_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.srv_aborts); + s->flags |= SF_ERR_SRVCL; + } + else if (res->flags & CF_READ_TIMEOUT) { + _HA_ATOMIC_INC(&s->be->be_counters.srv_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.srv_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->srv_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.srv_aborts); + s->flags |= SF_ERR_SRVTO; + } + else { + _HA_ATOMIC_INC(&s->be->be_counters.cli_aborts); + _HA_ATOMIC_INC(&sess->fe->fe_counters.cli_aborts); + if (sess->listener && sess->listener->counters) + _HA_ATOMIC_INC(&sess->listener->counters->cli_aborts); + if (srv) + _HA_ATOMIC_INC(&srv->counters.cli_aborts); + s->flags |= SF_ERR_CLITO; + } + sess_set_term_flags(s); + } + } + + /* + * Here we take care of forwarding unhandled data. This also includes + * connection establishments and shutdown requests. + */ + + + /* If no one is interested in analysing data, it's time to forward + * everything. We configure the buffer to forward indefinitely. + * Note that we're checking SC_FL_ABRT_WANTED as an indication of a possible + * recent call to channel_abort(). + */ + if (unlikely((!req->analysers || (req->analysers == AN_REQ_FLT_END && !(req->flags & CF_FLT_ANALYZE))) && + !(scf->flags & SC_FL_ABRT_WANTED) && !(scb->flags & SC_FL_SHUT_DONE) && + (sc_state_in(scf->state, SC_SB_EST|SC_SB_DIS|SC_SB_CLO)) && + (req->to_forward != CHN_INFINITE_FORWARD))) { + /* This buffer is freewheeling, there's no analyser + * attached to it. If any data are left in, we'll permit them to + * move. + */ + channel_auto_read(req); + channel_auto_connect(req); + channel_auto_close(req); + + if (IS_HTX_STRM(s)) { + struct htx *htx = htxbuf(&req->buf); + + /* We'll let data flow between the producer (if still connected) + * to the consumer. + */ + co_set_data(req, htx->data); + if ((global.tune.options & GTUNE_USE_FAST_FWD) && + !(scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && !(scb->flags & SC_FL_SHUT_WANTED)) + channel_htx_forward_forever(req, htx); + } + else { + /* We'll let data flow between the producer (if still connected) + * to the consumer (which might possibly not be connected yet). + */ + c_adv(req, ci_data(req)); + if ((global.tune.options & GTUNE_USE_FAST_FWD) && + !(scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && !(scb->flags & SC_FL_SHUT_WANTED)) + channel_forward_forever(req); + } + } + + /* reflect what the L7 analysers have seen last */ + rqf_last = req->flags; + scf_flags = (scf_flags & ~(SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) | (scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)); + scb_flags = (scb_flags & ~(SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) | (scb->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)); + + /* it's possible that an upper layer has requested a connection setup or abort. + * There are 2 situations where we decide to establish a new connection : + * - there are data scheduled for emission in the buffer + * - the CF_AUTO_CONNECT flag is set (active connection) + */ + if (scb->state == SC_ST_INI) { + if (!(scb->flags & SC_FL_SHUT_DONE)) { + if ((req->flags & CF_AUTO_CONNECT) || co_data(req)) { + /* If we have an appctx, there is no connect method, so we + * immediately switch to the connected state, otherwise we + * perform a connection request. + */ + scb->state = SC_ST_REQ; /* new connection requested */ + s->conn_retries = 0; + if ((s->be->retry_type &~ PR_RE_CONN_FAILED) && + (s->be->mode == PR_MODE_HTTP) && + !(s->txn->flags & TX_D_L7_RETRY)) + s->txn->flags |= TX_L7_RETRY; + + if (s->be->options & PR_O_ABRT_CLOSE) { + struct connection *conn = sc_conn(scf); + + if (conn && conn->mux && conn->mux->ctl) + conn->mux->ctl(conn, MUX_CTL_SUBS_RECV, NULL); + } + } + } + else { + s->scb->state = SC_ST_CLO; /* shutw+ini = abort */ + sc_schedule_shutdown(scb); + sc_schedule_abort(scb); + } + } + + + /* we may have a pending connection request, or a connection waiting + * for completion. + */ + if (sc_state_in(scb->state, SC_SB_REQ|SC_SB_QUE|SC_SB_TAR|SC_SB_ASS)) { + /* prune the request variables and swap to the response variables. */ + if (s->vars_reqres.scope != SCOPE_RES) { + if (!LIST_ISEMPTY(&s->vars_reqres.head)) + vars_prune(&s->vars_reqres, s->sess, s); + vars_init_head(&s->vars_reqres, SCOPE_RES); + } + + do { + /* nb: step 1 might switch from QUE to ASS, but we first want + * to give a chance to step 2 to perform a redirect if needed. + */ + if (scb->state != SC_ST_REQ) + back_try_conn_req(s); + if (scb->state == SC_ST_REQ) + back_handle_st_req(s); + + /* get a chance to complete an immediate connection setup */ + if (scb->state == SC_ST_RDY) + goto resync_stconns; + + /* applets directly go to the ESTABLISHED state. Similarly, + * servers experience the same fate when their connection + * is reused. + */ + if (unlikely(scb->state == SC_ST_EST)) + back_establish(s); + + srv = objt_server(s->target); + if (scb->state == SC_ST_ASS && srv && srv->rdr_len && (s->flags & SF_REDIRECTABLE)) + http_perform_server_redirect(s, scb); + } while (scb->state == SC_ST_ASS); + } + + /* Let's see if we can send the pending request now */ + sc_conn_sync_send(scb); + + /* + * Now forward all shutdown requests between both sides of the request buffer + */ + + /* first, let's check if the request buffer needs to shutdown(write), which may + * happen either because the input is closed or because we want to force a close + * once the server has begun to respond. If a half-closed timeout is set, we adjust + * the other side's timeout as well. However this doesn't have effect during the + * connection setup unless the backend has abortonclose set. + */ + if (unlikely((req->flags & CF_AUTO_CLOSE) && (scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && + !(scb->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) && + (scb->state != SC_ST_CON || (s->be->options & PR_O_ABRT_CLOSE)))) { + sc_schedule_shutdown(scb); + } + + /* shutdown(write) pending */ + if (unlikely((scb->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) == SC_FL_SHUT_WANTED && + (!co_data(req) || (req->flags & CF_WRITE_TIMEOUT)))) { + if (scf->flags & SC_FL_ERROR) + scb->flags |= SC_FL_NOLINGER; + sc_shutdown(scb); + } + + /* shutdown(write) done on server side, we must stop the client too */ + if (unlikely((scb->flags & SC_FL_SHUT_DONE) && !(scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED))) && + !req->analysers) + sc_schedule_abort(scf); + + /* shutdown(read) pending */ + if (unlikely((scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) == SC_FL_ABRT_WANTED)) { + if (scf->flags & SC_FL_NOHALF) + scf->flags |= SC_FL_NOLINGER; + sc_abort(scf); + } + + /* Benchmarks have shown that it's optimal to do a full resync now */ + if (scf->state == SC_ST_DIS || + sc_state_in(scb->state, SC_SB_RDY|SC_SB_DIS) || + ((scf->flags & SC_FL_ERROR) && scf->state != SC_ST_CLO) || + ((scb->flags & SC_FL_ERROR) && scb->state != SC_ST_CLO)) + goto resync_stconns; + + /* otherwise we want to check if we need to resync the req buffer or not */ + if (((scf->flags ^ scf_flags) & (SC_FL_EOS|SC_FL_ABRT_DONE)) || ((scb->flags ^ scb_flags) & SC_FL_SHUT_DONE)) + goto resync_request; + + /* perform output updates to the response buffer */ + + /* If no one is interested in analysing data, it's time to forward + * everything. We configure the buffer to forward indefinitely. + * Note that we're checking SC_FL_ABRT_WANTED as an indication of a possible + * recent call to channel_abort(). + */ + if (unlikely((!res->analysers || (res->analysers == AN_RES_FLT_END && !(res->flags & CF_FLT_ANALYZE))) && + !(scf->flags & SC_FL_ABRT_WANTED) && !(scb->flags & SC_FL_SHUT_WANTED) && + sc_state_in(scb->state, SC_SB_EST|SC_SB_DIS|SC_SB_CLO) && + (res->to_forward != CHN_INFINITE_FORWARD))) { + /* This buffer is freewheeling, there's no analyser + * attached to it. If any data are left in, we'll permit them to + * move. + */ + channel_auto_read(res); + channel_auto_close(res); + + if (IS_HTX_STRM(s)) { + struct htx *htx = htxbuf(&res->buf); + + /* We'll let data flow between the producer (if still connected) + * to the consumer. + */ + co_set_data(res, htx->data); + if ((global.tune.options & GTUNE_USE_FAST_FWD) && + !(scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && !(scb->flags & SC_FL_SHUT_WANTED)) + channel_htx_forward_forever(res, htx); + } + else { + /* We'll let data flow between the producer (if still connected) + * to the consumer. + */ + c_adv(res, ci_data(res)); + if ((global.tune.options & GTUNE_USE_FAST_FWD) && + !(scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && !(scb->flags & SC_FL_SHUT_WANTED)) + channel_forward_forever(res); + } + + /* if we have no analyser anymore in any direction and have a + * tunnel timeout set, use it now. Note that we must respect + * the half-closed timeouts as well. + */ + if (!req->analysers && s->tunnel_timeout) { + scf->ioto = scb->ioto = s->tunnel_timeout; + + if (!IS_HTX_STRM(s)) { + if ((scf->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_SHUT_DONE)) && tick_isset(sess->fe->timeout.clientfin)) + scf->ioto = sess->fe->timeout.clientfin; + if ((scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_SHUT_DONE)) && tick_isset(s->be->timeout.serverfin)) + scb->ioto = s->be->timeout.serverfin; + } + } + } + + /* reflect what the L7 analysers have seen last */ + rpf_last = res->flags; + scb_flags = (scb_flags & ~(SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) | (scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)); + scf_flags = (scf_flags & ~(SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) | (scf->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)); + + /* Let's see if we can send the pending response now */ + sc_conn_sync_send(scf); + + /* + * Now forward all shutdown requests between both sides of the buffer + */ + + /* + * FIXME: this is probably where we should produce error responses. + */ + + /* first, let's check if the response buffer needs to shutdown(write) */ + if (unlikely((res->flags & CF_AUTO_CLOSE) && (scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE)) && + !(scf->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)))) { + sc_schedule_shutdown(scf); + } + + /* shutdown(write) pending */ + if (unlikely((scf->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) == SC_FL_SHUT_WANTED && + (!co_data(res) || (res->flags & CF_WRITE_TIMEOUT)))) { + sc_shutdown(scf); + } + + /* shutdown(write) done on the client side, we must stop the server too */ + if (unlikely((scf->flags & SC_FL_SHUT_DONE) && !(scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED))) && + !res->analysers) + sc_schedule_abort(scb); + + /* shutdown(read) pending */ + if (unlikely((scb->flags & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) == SC_FL_ABRT_WANTED)) { + if (scb->flags & SC_FL_NOHALF) + scb->flags |= SC_FL_NOLINGER; + sc_abort(scb); + } + + if (scf->state == SC_ST_DIS || + sc_state_in(scb->state, SC_SB_RDY|SC_SB_DIS) || + ((scf->flags & SC_FL_ERROR) && scf->state != SC_ST_CLO) || + ((scb->flags & SC_FL_ERROR) && scb->state != SC_ST_CLO)) + goto resync_stconns; + + if ((req->flags & ~rqf_last) & CF_MASK_ANALYSER) + goto resync_request; + + if (((scb->flags ^ scb_flags) & (SC_FL_EOS|SC_FL_ABRT_DONE|SC_FL_ABRT_WANTED)) || + ((scf->flags ^ scf_flags) & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) || + (res->analysers ^ res_ana_back)) + goto resync_response; + + if ((((req->flags ^ rqf_last) | (res->flags ^ rpf_last)) & CF_MASK_ANALYSER) || + (req->analysers ^ req_ana_back)) + goto resync_request; + + /* we're interested in getting wakeups again */ + scf->flags &= ~SC_FL_DONT_WAKE; + scb->flags &= ~SC_FL_DONT_WAKE; + + if (likely((scf->state != SC_ST_CLO) || !sc_state_in(scb->state, SC_SB_INI|SC_SB_CLO) || + (req->analysers & AN_REQ_FLT_END) || (res->analysers & AN_RES_FLT_END))) { + if ((sess->fe->options & PR_O_CONTSTATS) && (s->flags & SF_BE_ASSIGNED) && !(s->flags & SF_IGNORE)) + stream_process_counters(s); + + stream_update_both_sc(s); + + /* Reset pending events now */ + s->pending_events = 0; + + update_exp_and_leave: + /* Note: please ensure that if you branch here you disable SC_FL_DONT_WAKE */ + if (!req->analysers) + req->analyse_exp = TICK_ETERNITY; + if (!res->analysers) + res->analyse_exp = TICK_ETERNITY; + + if ((sess->fe->options & PR_O_CONTSTATS) && (s->flags & SF_BE_ASSIGNED) && + (!tick_isset(req->analyse_exp) || tick_is_expired(req->analyse_exp, now_ms))) + req->analyse_exp = tick_add(now_ms, 5000); + + t->expire = (tick_is_expired(t->expire, now_ms) ? 0 : t->expire); + t->expire = tick_first(t->expire, sc_ep_rcv_ex(scf)); + t->expire = tick_first(t->expire, sc_ep_snd_ex(scf)); + t->expire = tick_first(t->expire, sc_ep_rcv_ex(scb)); + t->expire = tick_first(t->expire, sc_ep_snd_ex(scb)); + t->expire = tick_first(t->expire, req->analyse_exp); + t->expire = tick_first(t->expire, res->analyse_exp); + t->expire = tick_first(t->expire, s->conn_exp); + + if (unlikely(tick_is_expired(t->expire, now_ms))) { + /* Some events prevented the timeouts to be handled but nothing evolved. + So do it now and resyunc the stconns + */ + stream_handle_timeouts(s); + goto resync_stconns; + } + + s->pending_events &= ~(TASK_WOKEN_TIMER | TASK_WOKEN_RES); + stream_release_buffers(s); + + DBG_TRACE_DEVEL("queuing", STRM_EV_STRM_PROC, s); + return t; /* nothing more to do */ + } + + DBG_TRACE_DEVEL("releasing", STRM_EV_STRM_PROC, s); + + if (s->flags & SF_BE_ASSIGNED) + _HA_ATOMIC_DEC(&s->be->beconn); + + if (unlikely((global.mode & MODE_DEBUG) && + (!(global.mode & MODE_QUIET) || (global.mode & MODE_VERBOSE)))) { + chunk_printf(&trash, "%08x:%s.closed[%04x:%04x]\n", + s->uniq_id, s->be->id, + (unsigned short)conn_fd(sc_conn(scf)), + (unsigned short)conn_fd(sc_conn(scb))); + DISGUISE(write(1, trash.area, trash.data)); + } + + if (!(s->flags & SF_IGNORE)) { + s->logs.t_close = ns_to_ms(now_ns - s->logs.accept_ts); + + stream_process_counters(s); + + if (s->txn && s->txn->status) { + int n; + + n = s->txn->status / 100; + if (n < 1 || n > 5) + n = 0; + + if (sess->fe->mode == PR_MODE_HTTP) { + _HA_ATOMIC_INC(&sess->fe->fe_counters.p.http.rsp[n]); + } + if ((s->flags & SF_BE_ASSIGNED) && + (s->be->mode == PR_MODE_HTTP)) { + _HA_ATOMIC_INC(&s->be->be_counters.p.http.rsp[n]); + _HA_ATOMIC_INC(&s->be->be_counters.p.http.cum_req); + } + } + + /* let's do a final log if we need it */ + if (!LIST_ISEMPTY(&sess->fe->logformat) && s->logs.logwait && + !(s->flags & SF_MONITOR) && + (!(sess->fe->options & PR_O_NULLNOLOG) || req->total)) { + /* we may need to know the position in the queue */ + pendconn_free(s); + + stream_cond_update_cpu_usage(s); + s->do_log(s); + } + + /* update time stats for this stream */ + stream_update_time_stats(s); + } + + /* the task MUST not be in the run queue anymore */ + stream_free(s); + task_destroy(t); + return NULL; +} + +/* Update the stream's backend and server time stats */ +void stream_update_time_stats(struct stream *s) +{ + int t_request; + int t_queue; + int t_connect; + int t_data; + int t_close; + struct server *srv; + unsigned int samples_window; + + t_request = 0; + t_queue = s->logs.t_queue; + t_connect = s->logs.t_connect; + t_close = s->logs.t_close; + t_data = s->logs.t_data; + + if (s->be->mode != PR_MODE_HTTP) + t_data = t_connect; + + if (t_connect < 0 || t_data < 0) + return; + + if ((llong)(s->logs.request_ts - s->logs.accept_ts) >= 0) + t_request = ns_to_ms(s->logs.request_ts - s->logs.accept_ts); + + t_data -= t_connect; + t_connect -= t_queue; + t_queue -= t_request; + + srv = objt_server(s->target); + if (srv) { + samples_window = (((s->be->mode == PR_MODE_HTTP) ? + srv->counters.p.http.cum_req : srv->counters.cum_lbconn) > TIME_STATS_SAMPLES) ? TIME_STATS_SAMPLES : 0; + swrate_add_dynamic(&srv->counters.q_time, samples_window, t_queue); + swrate_add_dynamic(&srv->counters.c_time, samples_window, t_connect); + swrate_add_dynamic(&srv->counters.d_time, samples_window, t_data); + swrate_add_dynamic(&srv->counters.t_time, samples_window, t_close); + HA_ATOMIC_UPDATE_MAX(&srv->counters.qtime_max, t_queue); + HA_ATOMIC_UPDATE_MAX(&srv->counters.ctime_max, t_connect); + HA_ATOMIC_UPDATE_MAX(&srv->counters.dtime_max, t_data); + HA_ATOMIC_UPDATE_MAX(&srv->counters.ttime_max, t_close); + } + samples_window = (((s->be->mode == PR_MODE_HTTP) ? + s->be->be_counters.p.http.cum_req : s->be->be_counters.cum_lbconn) > TIME_STATS_SAMPLES) ? TIME_STATS_SAMPLES : 0; + swrate_add_dynamic(&s->be->be_counters.q_time, samples_window, t_queue); + swrate_add_dynamic(&s->be->be_counters.c_time, samples_window, t_connect); + swrate_add_dynamic(&s->be->be_counters.d_time, samples_window, t_data); + swrate_add_dynamic(&s->be->be_counters.t_time, samples_window, t_close); + HA_ATOMIC_UPDATE_MAX(&s->be->be_counters.qtime_max, t_queue); + HA_ATOMIC_UPDATE_MAX(&s->be->be_counters.ctime_max, t_connect); + HA_ATOMIC_UPDATE_MAX(&s->be->be_counters.dtime_max, t_data); + HA_ATOMIC_UPDATE_MAX(&s->be->be_counters.ttime_max, t_close); +} + +/* + * This function adjusts sess->srv_conn and maintains the previous and new + * server's served stream counts. Setting newsrv to NULL is enough to release + * current connection slot. This function also notifies any LB algo which might + * expect to be informed about any change in the number of active streams on a + * server. + */ +void sess_change_server(struct stream *strm, struct server *newsrv) +{ + struct server *oldsrv = strm->srv_conn; + + if (oldsrv == newsrv) + return; + + if (oldsrv) { + _HA_ATOMIC_DEC(&oldsrv->served); + _HA_ATOMIC_DEC(&oldsrv->proxy->served); + __ha_barrier_atomic_store(); + if (oldsrv->proxy->lbprm.server_drop_conn) + oldsrv->proxy->lbprm.server_drop_conn(oldsrv); + stream_del_srv_conn(strm); + } + + if (newsrv) { + _HA_ATOMIC_INC(&newsrv->served); + _HA_ATOMIC_INC(&newsrv->proxy->served); + __ha_barrier_atomic_store(); + if (newsrv->proxy->lbprm.server_take_conn) + newsrv->proxy->lbprm.server_take_conn(newsrv); + stream_add_srv_conn(strm, newsrv); + } +} + +/* Handle server-side errors for default protocols. It is called whenever a a + * connection setup is aborted or a request is aborted in queue. It sets the + * stream termination flags so that the caller does not have to worry about + * them. It's installed as ->srv_error for the server-side stream connector. + */ +void default_srv_error(struct stream *s, struct stconn *sc) +{ + int err_type = s->conn_err_type; + int err = 0, fin = 0; + + if (err_type & STRM_ET_QUEUE_ABRT) { + err = SF_ERR_CLICL; + fin = SF_FINST_Q; + } + else if (err_type & STRM_ET_CONN_ABRT) { + err = SF_ERR_CLICL; + fin = SF_FINST_C; + } + else if (err_type & STRM_ET_QUEUE_TO) { + err = SF_ERR_SRVTO; + fin = SF_FINST_Q; + } + else if (err_type & STRM_ET_QUEUE_ERR) { + err = SF_ERR_SRVCL; + fin = SF_FINST_Q; + } + else if (err_type & STRM_ET_CONN_TO) { + err = SF_ERR_SRVTO; + fin = SF_FINST_C; + } + else if (err_type & STRM_ET_CONN_ERR) { + err = SF_ERR_SRVCL; + fin = SF_FINST_C; + } + else if (err_type & STRM_ET_CONN_RES) { + err = SF_ERR_RESOURCE; + fin = SF_FINST_C; + } + else /* STRM_ET_CONN_OTHER and others */ { + err = SF_ERR_INTERNAL; + fin = SF_FINST_C; + } + + if (!(s->flags & SF_ERR_MASK)) + s->flags |= err; + if (!(s->flags & SF_FINST_MASK)) + s->flags |= fin; +} + +/* kill a stream and set the termination flags to (one of SF_ERR_*) */ +void stream_shutdown(struct stream *stream, int why) +{ + if (stream->scb->flags & (SC_FL_SHUT_DONE|SC_FL_SHUT_WANTED)) + return; + + sc_schedule_shutdown(stream->scb); + sc_schedule_abort(stream->scb); + stream->task->nice = 1024; + if (!(stream->flags & SF_ERR_MASK)) + stream->flags |= why; + task_wakeup(stream->task, TASK_WOKEN_OTHER); +} + +/* dumps an error message for type at ptr related to stream , + * having reached loop rate , then aborts hoping to retrieve a core. + */ +void stream_dump_and_crash(enum obj_type *obj, int rate) +{ + struct stream *s; + char *msg = NULL; + const void *ptr; + + ptr = s = objt_stream(obj); + if (!s) { + const struct appctx *appctx = objt_appctx(obj); + if (!appctx) + return; + ptr = appctx; + s = appctx_strm(appctx); + if (!s) + return; + } + + chunk_reset(&trash); + chunk_printf(&trash, " "); + strm_dump_to_buffer(&trash, s, " ", HA_ATOMIC_LOAD(&global.anon_key)); + + if (ptr != s) { // that's an appctx + const struct appctx *appctx = ptr; + + chunk_appendf(&trash, " applet=%p(", appctx->applet); + resolve_sym_name(&trash, NULL, appctx->applet); + chunk_appendf(&trash, ")"); + + chunk_appendf(&trash, " handler=%p(", appctx->applet->fct); + resolve_sym_name(&trash, NULL, appctx->applet->fct); + chunk_appendf(&trash, ")"); + } + + memprintf(&msg, + "A bogus %s [%p] is spinning at %d calls per second and refuses to die, " + "aborting now! Please report this error to developers:\n" + "%s\n", + obj_type_name(obj), ptr, rate, trash.area); + + ha_alert("%s", msg); + send_log(NULL, LOG_EMERG, "%s", msg); + ABORT_NOW(); +} + +/* initialize the require structures */ +static void init_stream() +{ + int thr; + + for (thr = 0; thr < MAX_THREADS; thr++) + LIST_INIT(&ha_thread_ctx[thr].streams); +} +INITCALL0(STG_INIT, init_stream); + +/* Generates a unique ID based on the given , stores it in the given and + * returns the unique ID. + * + * If this function fails to allocate memory IST_NULL is returned. + * + * If an ID is already stored within the stream nothing happens existing unique ID is + * returned. + */ +struct ist stream_generate_unique_id(struct stream *strm, struct list *format) +{ + if (isttest(strm->unique_id)) { + return strm->unique_id; + } + else { + char *unique_id; + int length; + if ((unique_id = pool_alloc(pool_head_uniqueid)) == NULL) + return IST_NULL; + + length = build_logline(strm, unique_id, UNIQUEID_LEN, format); + strm->unique_id = ist2(unique_id, length); + + return strm->unique_id; + } +} + +/************************************************************************/ +/* All supported ACL keywords must be declared here. */ +/************************************************************************/ +static enum act_return stream_action_set_log_level(struct act_rule *rule, struct proxy *px, + struct session *sess, struct stream *s, int flags) +{ + s->logs.level = (uintptr_t)rule->arg.act.p[0]; + return ACT_RET_CONT; +} + + +/* Parse a "set-log-level" action. It takes the level value as argument. It + * returns ACT_RET_PRS_OK on success, ACT_RET_PRS_ERR on error. + */ +static enum act_parse_ret stream_parse_set_log_level(const char **args, int *cur_arg, struct proxy *px, + struct act_rule *rule, char **err) +{ + int level; + + if (!*args[*cur_arg]) { + bad_log_level: + memprintf(err, "expects exactly 1 argument (log level name or 'silent')"); + return ACT_RET_PRS_ERR; + } + if (strcmp(args[*cur_arg], "silent") == 0) + level = -1; + else if ((level = get_log_level(args[*cur_arg]) + 1) == 0) + goto bad_log_level; + + (*cur_arg)++; + + /* Register processing function. */ + rule->action_ptr = stream_action_set_log_level; + rule->action = ACT_CUSTOM; + rule->arg.act.p[0] = (void *)(uintptr_t)level; + return ACT_RET_PRS_OK; +} + +static enum act_return stream_action_set_nice(struct act_rule *rule, struct proxy *px, + struct session *sess, struct stream *s, int flags) +{ + s->task->nice = (uintptr_t)rule->arg.act.p[0]; + return ACT_RET_CONT; +} + + +/* Parse a "set-nice" action. It takes the nice value as argument. It returns + * ACT_RET_PRS_OK on success, ACT_RET_PRS_ERR on error. + */ +static enum act_parse_ret stream_parse_set_nice(const char **args, int *cur_arg, struct proxy *px, + struct act_rule *rule, char **err) +{ + int nice; + + if (!*args[*cur_arg]) { + bad_log_level: + memprintf(err, "expects exactly 1 argument (integer value)"); + return ACT_RET_PRS_ERR; + } + + nice = atoi(args[*cur_arg]); + if (nice < -1024) + nice = -1024; + else if (nice > 1024) + nice = 1024; + + (*cur_arg)++; + + /* Register processing function. */ + rule->action_ptr = stream_action_set_nice; + rule->action = ACT_CUSTOM; + rule->arg.act.p[0] = (void *)(uintptr_t)nice; + return ACT_RET_PRS_OK; +} + + +static enum act_return tcp_action_switch_stream_mode(struct act_rule *rule, struct proxy *px, + struct session *sess, struct stream *s, int flags) +{ + enum pr_mode mode = (uintptr_t)rule->arg.act.p[0]; + const struct mux_proto_list *mux_proto = rule->arg.act.p[1]; + + if (!IS_HTX_STRM(s) && mode == PR_MODE_HTTP) { + if (!stream_set_http_mode(s, mux_proto)) { + stream_abort(s); + return ACT_RET_ABRT; + } + } + return ACT_RET_STOP; +} + + +static int check_tcp_switch_stream_mode(struct act_rule *rule, struct proxy *px, char **err) +{ + const struct mux_proto_list *mux_ent; + const struct mux_proto_list *mux_proto = rule->arg.act.p[1]; + enum pr_mode pr_mode = (uintptr_t)rule->arg.act.p[0]; + enum proto_proxy_mode mode = conn_pr_mode_to_proto_mode(pr_mode); + + if (pr_mode == PR_MODE_HTTP) + px->options |= PR_O_HTTP_UPG; + + if (mux_proto) { + mux_ent = conn_get_best_mux_entry(mux_proto->token, PROTO_SIDE_FE, mode); + if (!mux_ent || !isteq(mux_ent->token, mux_proto->token)) { + memprintf(err, "MUX protocol '%.*s' is not compatible with the selected mode", + (int)mux_proto->token.len, mux_proto->token.ptr); + return 0; + } + } + else { + mux_ent = conn_get_best_mux_entry(IST_NULL, PROTO_SIDE_FE, mode); + if (!mux_ent) { + memprintf(err, "Unable to find compatible MUX protocol with the selected mode"); + return 0; + } + } + + /* Update the mux */ + rule->arg.act.p[1] = (void *)mux_ent; + return 1; + +} + +static enum act_parse_ret stream_parse_switch_mode(const char **args, int *cur_arg, + struct proxy *px, struct act_rule *rule, + char **err) +{ + const struct mux_proto_list *mux_proto = NULL; + struct ist proto; + enum pr_mode mode; + + /* must have at least the mode */ + if (*(args[*cur_arg]) == 0) { + memprintf(err, "'%s %s' expects a mode as argument.", args[0], args[*cur_arg-1]); + return ACT_RET_PRS_ERR; + } + + if (!(px->cap & PR_CAP_FE)) { + memprintf(err, "'%s %s' not allowed because %s '%s' has no frontend capability", + args[0], args[*cur_arg-1], proxy_type_str(px), px->id); + return ACT_RET_PRS_ERR; + } + /* Check if the mode. For now "tcp" is disabled because downgrade is not + * supported and PT is the only TCP mux. + */ + if (strcmp(args[*cur_arg], "http") == 0) + mode = PR_MODE_HTTP; + else { + memprintf(err, "'%s %s' expects a valid mode (got '%s').", args[0], args[*cur_arg-1], args[*cur_arg]); + return ACT_RET_PRS_ERR; + } + + /* check the proto, if specified */ + if (*(args[*cur_arg+1]) && strcmp(args[*cur_arg+1], "proto") == 0) { + if (*(args[*cur_arg+2]) == 0) { + memprintf(err, "'%s %s': '%s' expects a protocol as argument.", + args[0], args[*cur_arg-1], args[*cur_arg+1]); + return ACT_RET_PRS_ERR; + } + + proto = ist(args[*cur_arg + 2]); + mux_proto = get_mux_proto(proto); + if (!mux_proto) { + memprintf(err, "'%s %s': '%s' expects a valid MUX protocol, if specified (got '%s')", + args[0], args[*cur_arg-1], args[*cur_arg+1], args[*cur_arg+2]); + return ACT_RET_PRS_ERR; + } + *cur_arg += 2; + } + + (*cur_arg)++; + + /* Register processing function. */ + rule->action_ptr = tcp_action_switch_stream_mode; + rule->check_ptr = check_tcp_switch_stream_mode; + rule->action = ACT_CUSTOM; + rule->arg.act.p[0] = (void *)(uintptr_t)mode; + rule->arg.act.p[1] = (void *)mux_proto; + return ACT_RET_PRS_OK; +} + +/* 0=OK, <0=Alert, >0=Warning */ +static enum act_parse_ret stream_parse_use_service(const char **args, int *cur_arg, + struct proxy *px, struct act_rule *rule, + char **err) +{ + struct action_kw *kw; + + /* Check if the service name exists. */ + if (*(args[*cur_arg]) == 0) { + memprintf(err, "'%s' expects a service name.", args[0]); + return ACT_RET_PRS_ERR; + } + + /* lookup for keyword corresponding to a service. */ + kw = action_lookup(&service_keywords, args[*cur_arg]); + if (!kw) { + memprintf(err, "'%s' unknown service name.", args[1]); + return ACT_RET_PRS_ERR; + } + (*cur_arg)++; + + /* executes specific rule parser. */ + rule->kw = kw; + if (kw->parse((const char **)args, cur_arg, px, rule, err) == ACT_RET_PRS_ERR) + return ACT_RET_PRS_ERR; + + /* Register processing function. */ + rule->action_ptr = process_use_service; + rule->action = ACT_CUSTOM; + + return ACT_RET_PRS_OK; +} + +void service_keywords_register(struct action_kw_list *kw_list) +{ + LIST_APPEND(&service_keywords, &kw_list->list); +} + +struct action_kw *service_find(const char *kw) +{ + return action_lookup(&service_keywords, kw); +} + +/* Lists the known services on . If is null, emit them on stdout one + * per line. + */ +void list_services(FILE *out) +{ + const struct action_kw *akwp, *akwn; + struct action_kw_list *kw_list; + int found = 0; + int i; + + if (out) + fprintf(out, "Available services :"); + + for (akwn = akwp = NULL;; akwp = akwn) { + list_for_each_entry(kw_list, &service_keywords, list) { + for (i = 0; kw_list->kw[i].kw != NULL; i++) { + if (strordered(akwp ? akwp->kw : NULL, + kw_list->kw[i].kw, + akwn != akwp ? akwn->kw : NULL)) + akwn = &kw_list->kw[i]; + found = 1; + } + } + if (akwn == akwp) + break; + if (out) + fprintf(out, " %s", akwn->kw); + else + printf("%s\n", akwn->kw); + } + if (!found && out) + fprintf(out, " none\n"); +} + +/* appctx context used by the "show sess" command */ +/* flags used for show_sess_ctx.flags */ +#define CLI_SHOWSESS_F_SUSP 0x00000001 /* show only suspicious streams */ + +struct show_sess_ctx { + struct bref bref; /* back-reference from the session being dumped */ + void *target; /* session we want to dump, or NULL for all */ + unsigned int thr; /* the thread number being explored (0..MAX_THREADS-1) */ + unsigned int uid; /* if non-null, the uniq_id of the session being dumped */ + unsigned int min_age; /* minimum age of streams to dump */ + unsigned int flags; /* CLI_SHOWSESS_* */ + int section; /* section of the session being dumped */ + int pos; /* last position of the current session's buffer */ +}; + +/* This function appends a complete dump of a stream state onto the buffer, + * possibly anonymizing using the specified anon_key. The caller is responsible + * for ensuring that enough room remains in the buffer to dump a complete + * stream at once. Each new output line will be prefixed with if non-null, + * which is used to preserve indenting. + */ +void strm_dump_to_buffer(struct buffer *buf, const struct stream *strm, const char *pfx, uint32_t anon_key) +{ + struct stconn *scf, *scb; + struct tm tm; + extern const char *monthname[12]; + char pn[INET6_ADDRSTRLEN]; + struct connection *conn; + struct appctx *tmpctx; + + pfx = pfx ? pfx : ""; + + get_localtime(strm->logs.accept_date.tv_sec, &tm); + chunk_appendf(buf, + "%p: [%02d/%s/%04d:%02d:%02d:%02d.%06d] id=%u proto=%s", + strm, + tm.tm_mday, monthname[tm.tm_mon], tm.tm_year+1900, + tm.tm_hour, tm.tm_min, tm.tm_sec, (int)(strm->logs.accept_date.tv_usec), + strm->uniq_id, + strm_li(strm) ? strm_li(strm)->rx.proto->name : "?"); + + conn = objt_conn(strm_orig(strm)); + switch (conn && conn_get_src(conn) ? addr_to_str(conn->src, pn, sizeof(pn)) : AF_UNSPEC) { + case AF_INET: + case AF_INET6: + chunk_appendf(buf, " source=%s:%d\n", + HA_ANON_STR(anon_key, pn), get_host_port(conn->src)); + break; + case AF_UNIX: + chunk_appendf(buf, " source=unix:%d\n", strm_li(strm)->luid); + break; + default: + /* no more information to print right now */ + chunk_appendf(buf, "\n"); + break; + } + + chunk_appendf(buf, + "%s flags=0x%x, conn_retries=%d, conn_exp=%s conn_et=0x%03x srv_conn=%p, pend_pos=%p waiting=%d epoch=%#x\n", pfx, + strm->flags, strm->conn_retries, + strm->conn_exp ? + tick_is_expired(strm->conn_exp, now_ms) ? "" : + human_time(TICKS_TO_MS(strm->conn_exp - now_ms), + TICKS_TO_MS(1000)) : "", + strm->conn_err_type, strm->srv_conn, strm->pend_pos, + LIST_INLIST(&strm->buffer_wait.list), strm->stream_epoch); + + chunk_appendf(buf, + "%s frontend=%s (id=%u mode=%s), listener=%s (id=%u)", pfx, + HA_ANON_STR(anon_key, strm_fe(strm)->id), strm_fe(strm)->uuid, proxy_mode_str(strm_fe(strm)->mode), + strm_li(strm) ? strm_li(strm)->name ? strm_li(strm)->name : "?" : "?", + strm_li(strm) ? strm_li(strm)->luid : 0); + + switch (conn && conn_get_dst(conn) ? addr_to_str(conn->dst, pn, sizeof(pn)) : AF_UNSPEC) { + case AF_INET: + case AF_INET6: + chunk_appendf(buf, " addr=%s:%d\n", + HA_ANON_STR(anon_key, pn), get_host_port(conn->dst)); + break; + case AF_UNIX: + chunk_appendf(buf, " addr=unix:%d\n", strm_li(strm)->luid); + break; + default: + /* no more information to print right now */ + chunk_appendf(buf, "\n"); + break; + } + + if (strm->be->cap & PR_CAP_BE) + chunk_appendf(buf, + "%s backend=%s (id=%u mode=%s)", pfx, + HA_ANON_STR(anon_key, strm->be->id), + strm->be->uuid, proxy_mode_str(strm->be->mode)); + else + chunk_appendf(buf, "%s backend= (id=-1 mode=-)", pfx); + + conn = sc_conn(strm->scb); + switch (conn && conn_get_src(conn) ? addr_to_str(conn->src, pn, sizeof(pn)) : AF_UNSPEC) { + case AF_INET: + case AF_INET6: + chunk_appendf(buf, " addr=%s:%d\n", + HA_ANON_STR(anon_key, pn), get_host_port(conn->src)); + break; + case AF_UNIX: + chunk_appendf(buf, " addr=unix\n"); + break; + default: + /* no more information to print right now */ + chunk_appendf(buf, "\n"); + break; + } + + if (strm->be->cap & PR_CAP_BE) + chunk_appendf(buf, + "%s server=%s (id=%u)", pfx, + objt_server(strm->target) ? HA_ANON_STR(anon_key, __objt_server(strm->target)->id) : "", + objt_server(strm->target) ? __objt_server(strm->target)->puid : 0); + else + chunk_appendf(buf, "%s server= (id=-1)", pfx); + + switch (conn && conn_get_dst(conn) ? addr_to_str(conn->dst, pn, sizeof(pn)) : AF_UNSPEC) { + case AF_INET: + case AF_INET6: + chunk_appendf(buf, " addr=%s:%d\n", + HA_ANON_STR(anon_key, pn), get_host_port(conn->dst)); + break; + case AF_UNIX: + chunk_appendf(buf, " addr=unix\n"); + break; + default: + /* no more information to print right now */ + chunk_appendf(buf, "\n"); + break; + } + + chunk_appendf(buf, + "%s task=%p (state=0x%02x nice=%d calls=%u rate=%u exp=%s tid=%d(%d/%d)%s", pfx, + strm->task, + strm->task->state, + strm->task->nice, strm->task->calls, read_freq_ctr(&strm->call_rate), + strm->task->expire ? + tick_is_expired(strm->task->expire, now_ms) ? "" : + human_time(TICKS_TO_MS(strm->task->expire - now_ms), + TICKS_TO_MS(1000)) : "", + strm->task->tid, + ha_thread_info[strm->task->tid].tgid, + ha_thread_info[strm->task->tid].ltid, + task_in_rq(strm->task) ? ", running" : ""); + + chunk_appendf(buf, + " age=%s)\n", + human_time(ns_to_sec(now_ns) - ns_to_sec(strm->logs.request_ts), 1)); + + if (strm->txn) + chunk_appendf(buf, + "%s txn=%p flags=0x%x meth=%d status=%d req.st=%s rsp.st=%s req.f=0x%02x rsp.f=0x%02x\n", pfx, + strm->txn, strm->txn->flags, strm->txn->meth, strm->txn->status, + h1_msg_state_str(strm->txn->req.msg_state), h1_msg_state_str(strm->txn->rsp.msg_state), + strm->txn->req.flags, strm->txn->rsp.flags); + + scf = strm->scf; + chunk_appendf(buf, "%s scf=%p flags=0x%08x ioto=%s state=%s endp=%s,%p,0x%08x sub=%d", pfx, + scf, scf->flags, human_time(scf->ioto, TICKS_TO_MS(1000)), sc_state_str(scf->state), + (sc_ep_test(scf, SE_FL_T_MUX) ? "CONN" : (sc_ep_test(scf, SE_FL_T_APPLET) ? "APPCTX" : "NONE")), + scf->sedesc->se, sc_ep_get(scf), scf->wait_event.events); + chunk_appendf(buf, " rex=%s", + sc_ep_rcv_ex(scf) ? human_time(TICKS_TO_MS(sc_ep_rcv_ex(scf) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " wex=%s", + sc_ep_snd_ex(scf) ? human_time(TICKS_TO_MS(sc_ep_snd_ex(scf) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " rto=%s", + tick_isset(scf->sedesc->lra) ? human_time(TICKS_TO_MS(tick_add(scf->sedesc->lra, scf->ioto) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " wto=%s\n", + tick_isset(scf->sedesc->fsb) ? human_time(TICKS_TO_MS(tick_add(scf->sedesc->fsb, scf->ioto) - now_ms), TICKS_TO_MS(1000)) : ""); + + chunk_appendf(&trash, "%s iobuf.flags=0x%08x .pipe=%d .buf=%u@%p+%u/%u\n", pfx, + scf->sedesc->iobuf.flags, + scf->sedesc->iobuf.pipe ? scf->sedesc->iobuf.pipe->data : 0, + scf->sedesc->iobuf.buf ? (unsigned int)b_data(scf->sedesc->iobuf.buf): 0, + scf->sedesc->iobuf.buf ? b_orig(scf->sedesc->iobuf.buf): NULL, + scf->sedesc->iobuf.buf ? (unsigned int)b_head_ofs(scf->sedesc->iobuf.buf): 0, + scf->sedesc->iobuf.buf ? (unsigned int)b_size(scf->sedesc->iobuf.buf): 0); + + if ((conn = sc_conn(scf)) != NULL) { + if (conn->mux && conn->mux->show_sd) { + char muxpfx[100] = ""; + + snprintf(muxpfx, sizeof(muxpfx), "%s ", pfx); + chunk_appendf(buf, "%s ", pfx); + conn->mux->show_sd(buf, scf->sedesc, muxpfx); + chunk_appendf(buf, "\n"); + } + + chunk_appendf(buf, + "%s co0=%p ctrl=%s xprt=%s mux=%s data=%s target=%s:%p\n", pfx, + conn, + conn_get_ctrl_name(conn), + conn_get_xprt_name(conn), + conn_get_mux_name(conn), + sc_get_data_name(scf), + obj_type_name(conn->target), + obj_base_ptr(conn->target)); + + chunk_appendf(buf, + "%s flags=0x%08x fd=%d fd.state=%02x updt=%d fd.tmask=0x%lx\n", pfx, + conn->flags, + conn_fd(conn), + conn_fd(conn) >= 0 ? fdtab[conn->handle.fd].state : 0, + conn_fd(conn) >= 0 ? !!(fdtab[conn->handle.fd].update_mask & ti->ltid_bit) : 0, + conn_fd(conn) >= 0 ? fdtab[conn->handle.fd].thread_mask: 0); + } + else if ((tmpctx = sc_appctx(scf)) != NULL) { + chunk_appendf(buf, + "%s app0=%p st0=%d st1=%d applet=%s tid=%d nice=%d calls=%u rate=%u\n", pfx, + tmpctx, + tmpctx->st0, + tmpctx->st1, + tmpctx->applet->name, + tmpctx->t->tid, + tmpctx->t->nice, tmpctx->t->calls, read_freq_ctr(&tmpctx->call_rate)); + } + + scb = strm->scb; + chunk_appendf(buf, "%s scb=%p flags=0x%08x ioto=%s state=%s endp=%s,%p,0x%08x sub=%d", pfx, + scb, scb->flags, human_time(scb->ioto, TICKS_TO_MS(1000)), sc_state_str(scb->state), + (sc_ep_test(scb, SE_FL_T_MUX) ? "CONN" : (sc_ep_test(scb, SE_FL_T_APPLET) ? "APPCTX" : "NONE")), + scb->sedesc->se, sc_ep_get(scb), scb->wait_event.events); + chunk_appendf(buf, " rex=%s", + sc_ep_rcv_ex(scb) ? human_time(TICKS_TO_MS(sc_ep_rcv_ex(scb) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " wex=%s", + sc_ep_snd_ex(scb) ? human_time(TICKS_TO_MS(sc_ep_snd_ex(scb) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " rto=%s", + tick_isset(scb->sedesc->lra) ? human_time(TICKS_TO_MS(tick_add(scb->sedesc->lra, scb->ioto) - now_ms), TICKS_TO_MS(1000)) : ""); + chunk_appendf(buf, " wto=%s\n", + tick_isset(scb->sedesc->fsb) ? human_time(TICKS_TO_MS(tick_add(scb->sedesc->fsb, scb->ioto) - now_ms), TICKS_TO_MS(1000)) : ""); + + chunk_appendf(&trash, "%s iobuf.flags=0x%08x .pipe=%d .buf=%u@%p+%u/%u\n", pfx, + scb->sedesc->iobuf.flags, + scb->sedesc->iobuf.pipe ? scb->sedesc->iobuf.pipe->data : 0, + scb->sedesc->iobuf.buf ? (unsigned int)b_data(scb->sedesc->iobuf.buf): 0, + scb->sedesc->iobuf.buf ? b_orig(scb->sedesc->iobuf.buf): NULL, + scb->sedesc->iobuf.buf ? (unsigned int)b_head_ofs(scb->sedesc->iobuf.buf): 0, + scb->sedesc->iobuf.buf ? (unsigned int)b_size(scb->sedesc->iobuf.buf): 0); + + if ((conn = sc_conn(scb)) != NULL) { + if (conn->mux && conn->mux->show_sd) { + char muxpfx[100] = ""; + + snprintf(muxpfx, sizeof(muxpfx), "%s ", pfx); + chunk_appendf(buf, "%s ", pfx); + conn->mux->show_sd(buf, scb->sedesc, muxpfx); + chunk_appendf(buf, "\n"); + } + + chunk_appendf(buf, + "%s co1=%p ctrl=%s xprt=%s mux=%s data=%s target=%s:%p\n", pfx, + conn, + conn_get_ctrl_name(conn), + conn_get_xprt_name(conn), + conn_get_mux_name(conn), + sc_get_data_name(scb), + obj_type_name(conn->target), + obj_base_ptr(conn->target)); + + chunk_appendf(buf, + "%s flags=0x%08x fd=%d fd.state=%02x updt=%d fd.tmask=0x%lx\n", pfx, + conn->flags, + conn_fd(conn), + conn_fd(conn) >= 0 ? fdtab[conn->handle.fd].state : 0, + conn_fd(conn) >= 0 ? !!(fdtab[conn->handle.fd].update_mask & ti->ltid_bit) : 0, + conn_fd(conn) >= 0 ? fdtab[conn->handle.fd].thread_mask: 0); + } + else if ((tmpctx = sc_appctx(scb)) != NULL) { + chunk_appendf(buf, + "%s app1=%p st0=%d st1=%d applet=%s tid=%d nice=%d calls=%u rate=%u\n", pfx, + tmpctx, + tmpctx->st0, + tmpctx->st1, + tmpctx->applet->name, + tmpctx->t->tid, + tmpctx->t->nice, tmpctx->t->calls, read_freq_ctr(&tmpctx->call_rate)); + } + + if (HAS_FILTERS(strm)) { + const struct filter *flt; + + chunk_appendf(buf, "%s filters={", pfx); + list_for_each_entry(flt, &strm->strm_flt.filters, list) { + if (flt->list.p != &strm->strm_flt.filters) + chunk_appendf(buf, ", "); + chunk_appendf(buf, "%p=\"%s\"", flt, FLT_ID(flt)); + } + chunk_appendf(buf, "}\n"); + } + + chunk_appendf(buf, + "%s req=%p (f=0x%06x an=0x%x tofwd=%d total=%lld)\n" + "%s an_exp=%s buf=%p data=%p o=%u p=%u i=%u size=%u\n", + pfx, + &strm->req, + strm->req.flags, strm->req.analysers, + strm->req.to_forward, strm->req.total, + pfx, + strm->req.analyse_exp ? + human_time(TICKS_TO_MS(strm->req.analyse_exp - now_ms), + TICKS_TO_MS(1000)) : "", + &strm->req.buf, + b_orig(&strm->req.buf), (unsigned int)co_data(&strm->req), + (unsigned int)ci_head_ofs(&strm->req), (unsigned int)ci_data(&strm->req), + (unsigned int)strm->req.buf.size); + + if (IS_HTX_STRM(strm)) { + struct htx *htx = htxbuf(&strm->req.buf); + + chunk_appendf(buf, + "%s htx=%p flags=0x%x size=%u data=%u used=%u wrap=%s extra=%llu\n", pfx, + htx, htx->flags, htx->size, htx->data, htx_nbblks(htx), + (htx->tail >= htx->head) ? "NO" : "YES", + (unsigned long long)htx->extra); + } + if (HAS_FILTERS(strm) && strm->strm_flt.current[0]) { + const struct filter *flt = strm->strm_flt.current[0]; + + chunk_appendf(buf, "%s current_filter=%p (id=\"%s\" flags=0x%x pre=0x%x post=0x%x) \n", pfx, + flt, flt->config->id, flt->flags, flt->pre_analyzers, flt->post_analyzers); + } + + chunk_appendf(buf, + "%s res=%p (f=0x%06x an=0x%x tofwd=%d total=%lld)\n" + "%s an_exp=%s buf=%p data=%p o=%u p=%u i=%u size=%u\n", + pfx, + &strm->res, + strm->res.flags, strm->res.analysers, + strm->res.to_forward, strm->res.total, + pfx, + strm->res.analyse_exp ? + human_time(TICKS_TO_MS(strm->res.analyse_exp - now_ms), + TICKS_TO_MS(1000)) : "", + &strm->res.buf, + b_orig(&strm->res.buf), (unsigned int)co_data(&strm->res), + (unsigned int)ci_head_ofs(&strm->res), (unsigned int)ci_data(&strm->res), + (unsigned int)strm->res.buf.size); + + if (IS_HTX_STRM(strm)) { + struct htx *htx = htxbuf(&strm->res.buf); + + chunk_appendf(buf, + "%s htx=%p flags=0x%x size=%u data=%u used=%u wrap=%s extra=%llu\n", pfx, + htx, htx->flags, htx->size, htx->data, htx_nbblks(htx), + (htx->tail >= htx->head) ? "NO" : "YES", + (unsigned long long)htx->extra); + } + + if (HAS_FILTERS(strm) && strm->strm_flt.current[1]) { + const struct filter *flt = strm->strm_flt.current[1]; + + chunk_appendf(buf, "%s current_filter=%p (id=\"%s\" flags=0x%x pre=0x%x post=0x%x) \n", pfx, + flt, flt->config->id, flt->flags, flt->pre_analyzers, flt->post_analyzers); + } + + if (strm->current_rule_list && strm->current_rule) { + const struct act_rule *rule = strm->current_rule; + chunk_appendf(buf, "%s current_rule=\"%s\" [%s:%d]\n", pfx, rule->kw->kw, rule->conf.file, rule->conf.line); + } +} + +/* This function dumps a complete stream state onto the stream connector's + * read buffer. The stream has to be set in strm. It returns 0 if the output + * buffer is full and it needs to be called again, otherwise non-zero. It is + * designed to be called from stats_dump_strm_to_buffer() below. + */ +static int stats_dump_full_strm_to_buffer(struct stconn *sc, struct stream *strm) +{ + struct appctx *appctx = __sc_appctx(sc); + struct show_sess_ctx *ctx = appctx->svcctx; + + chunk_reset(&trash); + + if (ctx->section > 0 && ctx->uid != strm->uniq_id) { + /* stream changed, no need to go any further */ + chunk_appendf(&trash, " *** session terminated while we were watching it ***\n"); + if (applet_putchk(appctx, &trash) == -1) + goto full; + goto done; + } + + switch (ctx->section) { + case 0: /* main status of the stream */ + ctx->uid = strm->uniq_id; + ctx->section = 1; + __fallthrough; + + case 1: + strm_dump_to_buffer(&trash, strm, "", appctx->cli_anon_key); + if (applet_putchk(appctx, &trash) == -1) + goto full; + + /* use other states to dump the contents */ + } + /* end of dump */ + done: + ctx->uid = 0; + ctx->section = 0; + return 1; + full: + return 0; +} + +static int cli_parse_show_sess(char **args, char *payload, struct appctx *appctx, void *private) +{ + struct show_sess_ctx *ctx = applet_reserve_svcctx(appctx, sizeof(*ctx)); + + if (!cli_has_level(appctx, ACCESS_LVL_OPER)) + return 1; + + /* now all sessions by default */ + ctx->target = NULL; + ctx->min_age = 0; + ctx->section = 0; /* start with stream status */ + ctx->pos = 0; + ctx->thr = 0; + + if (*args[2] && strcmp(args[2], "older") == 0) { + unsigned timeout; + const char *res; + + if (!*args[3]) + return cli_err(appctx, "Expects a minimum age (in seconds by default).\n"); + + res = parse_time_err(args[3], &timeout, TIME_UNIT_S); + if (res != 0) + return cli_err(appctx, "Invalid age.\n"); + + ctx->min_age = timeout; + ctx->target = (void *)-1; /* show all matching entries */ + } + else if (*args[2] && strcmp(args[2], "susp") == 0) { + ctx->flags |= CLI_SHOWSESS_F_SUSP; + ctx->target = (void *)-1; /* show all matching entries */ + } + else if (*args[2] && strcmp(args[2], "all") == 0) + ctx->target = (void *)-1; + else if (*args[2]) + ctx->target = (void *)strtoul(args[2], NULL, 0); + + /* The back-ref must be reset, it will be detected and set by + * the dump code upon first invocation. + */ + LIST_INIT(&ctx->bref.users); + + /* let's set our own stream's epoch to the current one and increment + * it so that we know which streams were already there before us. + */ + appctx_strm(appctx)->stream_epoch = _HA_ATOMIC_FETCH_ADD(&stream_epoch, 1); + return 0; +} + +/* This function dumps all streams' states onto the stream connector's + * read buffer. It returns 0 if the output buffer is full and it needs + * to be called again, otherwise non-zero. It proceeds in an isolated + * thread so there is no thread safety issue here. + */ +static int cli_io_handler_dump_sess(struct appctx *appctx) +{ + struct show_sess_ctx *ctx = appctx->svcctx; + struct stconn *sc = appctx_sc(appctx); + struct connection *conn; + + thread_isolate(); + + if (ctx->thr >= global.nbthread) { + /* already terminated */ + goto done; + } + + /* FIXME: Don't watch the other side !*/ + if (unlikely(sc_opposite(sc)->flags & SC_FL_SHUT_DONE)) { + /* If we're forced to shut down, we might have to remove our + * reference to the last stream being dumped. + */ + if (!LIST_ISEMPTY(&ctx->bref.users)) { + LIST_DELETE(&ctx->bref.users); + LIST_INIT(&ctx->bref.users); + } + goto done; + } + + chunk_reset(&trash); + + /* first, let's detach the back-ref from a possible previous stream */ + if (!LIST_ISEMPTY(&ctx->bref.users)) { + LIST_DELETE(&ctx->bref.users); + LIST_INIT(&ctx->bref.users); + } else if (!ctx->bref.ref) { + /* first call, start with first stream */ + ctx->bref.ref = ha_thread_ctx[ctx->thr].streams.n; + } + + /* and start from where we stopped */ + while (1) { + char pn[INET6_ADDRSTRLEN]; + struct stream *curr_strm; + int done= 0; + + if (ctx->bref.ref == &ha_thread_ctx[ctx->thr].streams) + done = 1; + else { + /* check if we've found a stream created after issuing the "show sess" */ + curr_strm = LIST_ELEM(ctx->bref.ref, struct stream *, list); + if ((int)(curr_strm->stream_epoch - appctx_strm(appctx)->stream_epoch) > 0) + done = 1; + } + + if (done) { + ctx->thr++; + if (ctx->thr >= global.nbthread) + break; + ctx->bref.ref = ha_thread_ctx[ctx->thr].streams.n; + continue; + } + + if (ctx->min_age) { + uint age = ns_to_sec(now_ns) - ns_to_sec(curr_strm->logs.request_ts); + if (age < ctx->min_age) + goto next_sess; + } + + if (ctx->flags & CLI_SHOWSESS_F_SUSP) { + /* only show suspicious streams. Non-suspicious ones have a valid + * expiration date in the future and a valid front endpoint. + */ + if (curr_strm->task->expire && + !tick_is_expired(curr_strm->task->expire, now_ms) && + curr_strm->scf && curr_strm->scf->sedesc && curr_strm->scf->sedesc->se) + goto next_sess; + } + + if (ctx->target) { + if (ctx->target != (void *)-1 && ctx->target != curr_strm) + goto next_sess; + + LIST_APPEND(&curr_strm->back_refs, &ctx->bref.users); + /* call the proper dump() function and return if we're missing space */ + if (!stats_dump_full_strm_to_buffer(sc, curr_strm)) + goto full; + + /* stream dump complete */ + LIST_DELETE(&ctx->bref.users); + LIST_INIT(&ctx->bref.users); + if (ctx->target != (void *)-1) { + ctx->target = NULL; + break; + } + else + goto next_sess; + } + + chunk_appendf(&trash, + "%p: proto=%s", + curr_strm, + strm_li(curr_strm) ? strm_li(curr_strm)->rx.proto->name : "?"); + + conn = objt_conn(strm_orig(curr_strm)); + switch (conn && conn_get_src(conn) ? addr_to_str(conn->src, pn, sizeof(pn)) : AF_UNSPEC) { + case AF_INET: + case AF_INET6: + chunk_appendf(&trash, + " src=%s:%d fe=%s be=%s srv=%s", + HA_ANON_CLI(pn), + get_host_port(conn->src), + HA_ANON_CLI(strm_fe(curr_strm)->id), + (curr_strm->be->cap & PR_CAP_BE) ? HA_ANON_CLI(curr_strm->be->id) : "", + objt_server(curr_strm->target) ? HA_ANON_CLI(__objt_server(curr_strm->target)->id) : "" + ); + break; + case AF_UNIX: + chunk_appendf(&trash, + " src=unix:%d fe=%s be=%s srv=%s", + strm_li(curr_strm)->luid, + HA_ANON_CLI(strm_fe(curr_strm)->id), + (curr_strm->be->cap & PR_CAP_BE) ? HA_ANON_CLI(curr_strm->be->id) : "", + objt_server(curr_strm->target) ? HA_ANON_CLI(__objt_server(curr_strm->target)->id) : "" + ); + break; + } + + chunk_appendf(&trash, + " ts=%02x epoch=%#x age=%s calls=%u rate=%u cpu=%llu lat=%llu", + curr_strm->task->state, curr_strm->stream_epoch, + human_time(ns_to_sec(now_ns) - ns_to_sec(curr_strm->logs.request_ts), 1), + curr_strm->task->calls, read_freq_ctr(&curr_strm->call_rate), + (unsigned long long)curr_strm->cpu_time, (unsigned long long)curr_strm->lat_time); + + chunk_appendf(&trash, + " rq[f=%06xh,i=%u,an=%02xh", + curr_strm->req.flags, + (unsigned int)ci_data(&curr_strm->req), + curr_strm->req.analysers); + + chunk_appendf(&trash, + ",ax=%s]", + curr_strm->req.analyse_exp ? + human_time(TICKS_TO_MS(curr_strm->req.analyse_exp - now_ms), + TICKS_TO_MS(1000)) : ""); + + chunk_appendf(&trash, + " rp[f=%06xh,i=%u,an=%02xh", + curr_strm->res.flags, + (unsigned int)ci_data(&curr_strm->res), + curr_strm->res.analysers); + chunk_appendf(&trash, + ",ax=%s]", + curr_strm->res.analyse_exp ? + human_time(TICKS_TO_MS(curr_strm->res.analyse_exp - now_ms), + TICKS_TO_MS(1000)) : ""); + + conn = sc_conn(curr_strm->scf); + chunk_appendf(&trash," scf=[%d,%1xh,fd=%d", + curr_strm->scf->state, curr_strm->scf->flags, conn_fd(conn)); + chunk_appendf(&trash, ",rex=%s", + sc_ep_rcv_ex(curr_strm->scf) ? + human_time(TICKS_TO_MS(sc_ep_rcv_ex(curr_strm->scf) - now_ms), + TICKS_TO_MS(1000)) : ""); + chunk_appendf(&trash,",wex=%s]", + sc_ep_snd_ex(curr_strm->scf) ? + human_time(TICKS_TO_MS(sc_ep_snd_ex(curr_strm->scf) - now_ms), + TICKS_TO_MS(1000)) : ""); + + conn = sc_conn(curr_strm->scb); + chunk_appendf(&trash, " scb=[%d,%1xh,fd=%d", + curr_strm->scb->state, curr_strm->scb->flags, conn_fd(conn)); + chunk_appendf(&trash, ",rex=%s", + sc_ep_rcv_ex(curr_strm->scb) ? + human_time(TICKS_TO_MS(sc_ep_rcv_ex(curr_strm->scb) - now_ms), + TICKS_TO_MS(1000)) : ""); + chunk_appendf(&trash, ",wex=%s]", + sc_ep_snd_ex(curr_strm->scb) ? + human_time(TICKS_TO_MS(sc_ep_snd_ex(curr_strm->scb) - now_ms), + TICKS_TO_MS(1000)) : ""); + + chunk_appendf(&trash, + " exp=%s rc=%d c_exp=%s", + curr_strm->task->expire ? + human_time(TICKS_TO_MS(curr_strm->task->expire - now_ms), + TICKS_TO_MS(1000)) : "", + curr_strm->conn_retries, + curr_strm->conn_exp ? + human_time(TICKS_TO_MS(curr_strm->conn_exp - now_ms), + TICKS_TO_MS(1000)) : ""); + if (task_in_rq(curr_strm->task)) + chunk_appendf(&trash, " run(nice=%d)", curr_strm->task->nice); + + chunk_appendf(&trash, "\n"); + + if (applet_putchk(appctx, &trash) == -1) { + /* let's try again later from this stream. We add ourselves into + * this stream's users so that it can remove us upon termination. + */ + LIST_APPEND(&curr_strm->back_refs, &ctx->bref.users); + goto full; + } + + next_sess: + ctx->bref.ref = curr_strm->list.n; + } + + if (ctx->target && ctx->target != (void *)-1) { + /* specified stream not found */ + if (ctx->section > 0) + chunk_appendf(&trash, " *** session terminated while we were watching it ***\n"); + else + chunk_appendf(&trash, "Session not found.\n"); + + if (applet_putchk(appctx, &trash) == -1) + goto full; + + ctx->target = NULL; + ctx->uid = 0; + goto done; + } + + done: + thread_release(); + return 1; + full: + thread_release(); + return 0; +} + +static void cli_release_show_sess(struct appctx *appctx) +{ + struct show_sess_ctx *ctx = appctx->svcctx; + + if (ctx->thr < global.nbthread) { + /* a dump was aborted, either in error or timeout. We need to + * safely detach from the target stream's list. It's mandatory + * to lock because a stream on the target thread could be moving + * our node. + */ + thread_isolate(); + if (!LIST_ISEMPTY(&ctx->bref.users)) + LIST_DELETE(&ctx->bref.users); + thread_release(); + } +} + +/* Parses the "shutdown session" directive, it always returns 1 */ +static int cli_parse_shutdown_session(char **args, char *payload, struct appctx *appctx, void *private) +{ + struct stream *strm, *ptr; + int thr; + + if (!cli_has_level(appctx, ACCESS_LVL_ADMIN)) + return 1; + + ptr = (void *)strtoul(args[2], NULL, 0); + if (!ptr) + return cli_err(appctx, "Session pointer expected (use 'show sess').\n"); + + strm = NULL; + + thread_isolate(); + + /* first, look for the requested stream in the stream table */ + for (thr = 0; strm != ptr && thr < global.nbthread; thr++) { + list_for_each_entry(strm, &ha_thread_ctx[thr].streams, list) { + if (strm == ptr) { + stream_shutdown(strm, SF_ERR_KILLED); + break; + } + } + } + + thread_release(); + + /* do we have the stream ? */ + if (strm != ptr) + return cli_err(appctx, "No such session (use 'show sess').\n"); + + return 1; +} + +/* Parses the "shutdown session server" directive, it always returns 1 */ +static int cli_parse_shutdown_sessions_server(char **args, char *payload, struct appctx *appctx, void *private) +{ + struct server *sv; + + if (!cli_has_level(appctx, ACCESS_LVL_ADMIN)) + return 1; + + sv = cli_find_server(appctx, args[3]); + if (!sv) + return 1; + + /* kill all the stream that are on this server */ + HA_SPIN_LOCK(SERVER_LOCK, &sv->lock); + srv_shutdown_streams(sv, SF_ERR_KILLED); + HA_SPIN_UNLOCK(SERVER_LOCK, &sv->lock); + return 1; +} + +/* register cli keywords */ +static struct cli_kw_list cli_kws = {{ },{ + { { "show", "sess", NULL }, "show sess [|all|susp|older ] : report the list of current sessions or dump this exact session", cli_parse_show_sess, cli_io_handler_dump_sess, cli_release_show_sess }, + { { "shutdown", "session", NULL }, "shutdown session [id] : kill a specific session", cli_parse_shutdown_session, NULL, NULL }, + { { "shutdown", "sessions", "server" }, "shutdown sessions server / : kill sessions on a server", cli_parse_shutdown_sessions_server, NULL, NULL }, + {{},} +}}; + +INITCALL1(STG_REGISTER, cli_register_kw, &cli_kws); + +/* main configuration keyword registration. */ +static struct action_kw_list stream_tcp_req_keywords = { ILH, { + { "set-log-level", stream_parse_set_log_level }, + { "set-nice", stream_parse_set_nice }, + { "switch-mode", stream_parse_switch_mode }, + { "use-service", stream_parse_use_service }, + { /* END */ } +}}; + +INITCALL1(STG_REGISTER, tcp_req_cont_keywords_register, &stream_tcp_req_keywords); + +/* main configuration keyword registration. */ +static struct action_kw_list stream_tcp_res_keywords = { ILH, { + { "set-log-level", stream_parse_set_log_level }, + { "set-nice", stream_parse_set_nice }, + { /* END */ } +}}; + +INITCALL1(STG_REGISTER, tcp_res_cont_keywords_register, &stream_tcp_res_keywords); + +static struct action_kw_list stream_http_req_keywords = { ILH, { + { "set-log-level", stream_parse_set_log_level }, + { "set-nice", stream_parse_set_nice }, + { "use-service", stream_parse_use_service }, + { /* END */ } +}}; + +INITCALL1(STG_REGISTER, http_req_keywords_register, &stream_http_req_keywords); + +static struct action_kw_list stream_http_res_keywords = { ILH, { + { "set-log-level", stream_parse_set_log_level }, + { "set-nice", stream_parse_set_nice }, + { /* END */ } +}}; + +INITCALL1(STG_REGISTER, http_res_keywords_register, &stream_http_res_keywords); + +static struct action_kw_list stream_http_after_res_actions = { ILH, { + { "set-log-level", stream_parse_set_log_level }, + { /* END */ } +}}; + +INITCALL1(STG_REGISTER, http_after_res_keywords_register, &stream_http_after_res_actions); + +static int smp_fetch_cur_client_timeout(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm) + return 0; + + smp->data.u.sint = TICKS_TO_MS(smp->strm->scf->ioto); + return 1; +} + +static int smp_fetch_cur_server_timeout(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm) + return 0; + + smp->data.u.sint = TICKS_TO_MS(smp->strm->scb->ioto); + return 1; +} + +static int smp_fetch_cur_tunnel_timeout(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm) + return 0; + + smp->data.u.sint = TICKS_TO_MS(smp->strm->tunnel_timeout); + return 1; +} + +static int smp_fetch_last_rule_file(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_STR; + if (!smp->strm || !smp->strm->last_rule_file) + return 0; + + smp->flags |= SMP_F_CONST; + smp->data.u.str.area = (char *)smp->strm->last_rule_file; + smp->data.u.str.data = strlen(smp->strm->last_rule_file); + return 1; +} + +static int smp_fetch_last_rule_line(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm || !smp->strm->last_rule_line) + return 0; + + smp->data.u.sint = smp->strm->last_rule_line; + return 1; +} + +static int smp_fetch_sess_term_state(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + struct buffer *trash = get_trash_chunk(); + + smp->flags = SMP_F_VOLATILE; + smp->data.type = SMP_T_STR; + if (!smp->strm) + return 0; + + trash->area[trash->data++] = sess_term_cond[(smp->strm->flags & SF_ERR_MASK) >> SF_ERR_SHIFT]; + trash->area[trash->data++] = sess_fin_state[(smp->strm->flags & SF_FINST_MASK) >> SF_FINST_SHIFT]; + + smp->data.u.str = *trash; + smp->data.type = SMP_T_STR; + smp->flags &= ~SMP_F_CONST; + return 1; +} + +static int smp_fetch_conn_retries(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm) + return 0; + + if (!sc_state_in(smp->strm->scb->state, SC_SB_DIS|SC_SB_CLO)) + smp->flags |= SMP_F_VOL_TEST; + smp->data.u.sint = smp->strm->conn_retries; + return 1; +} + +static int smp_fetch_id32(const struct arg *args, struct sample *smp, const char *km, void *private) +{ + smp->flags = SMP_F_VOL_TXN; + smp->data.type = SMP_T_SINT; + if (!smp->strm) + return 0; + smp->data.u.sint = smp->strm->uniq_id; + return 1; +} + +/* Note: must not be declared as its list will be overwritten. + * Please take care of keeping this list alphabetically sorted. + */ +static struct sample_fetch_kw_list smp_kws = {ILH, { + { "cur_client_timeout", smp_fetch_cur_client_timeout, 0, NULL, SMP_T_SINT, SMP_USE_FTEND, }, + { "cur_server_timeout", smp_fetch_cur_server_timeout, 0, NULL, SMP_T_SINT, SMP_USE_BKEND, }, + { "cur_tunnel_timeout", smp_fetch_cur_tunnel_timeout, 0, NULL, SMP_T_SINT, SMP_USE_BKEND, }, + { "last_rule_file", smp_fetch_last_rule_file, 0, NULL, SMP_T_STR, SMP_USE_INTRN, }, + { "last_rule_line", smp_fetch_last_rule_line, 0, NULL, SMP_T_SINT, SMP_USE_INTRN, }, + { "txn.conn_retries", smp_fetch_conn_retries, 0, NULL, SMP_T_SINT, SMP_USE_L4SRV, }, + { "txn.id32", smp_fetch_id32, 0, NULL, SMP_T_SINT, SMP_USE_INTRN, }, + { "txn.sess_term_state",smp_fetch_sess_term_state, 0, NULL, SMP_T_STR, SMP_USE_INTRN, }, + { NULL, NULL, 0, 0, 0 }, +}}; + +INITCALL1(STG_REGISTER, sample_register_fetches, &smp_kws); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * End: + */ -- cgit v1.2.3