#REGTEST_TYPE=slow

# broken with BoringSSL.

# This reg-test focuses on the OCSP response auto-update functionality. It does
# not test the full scope of the feature because most of it is based on
# expiration times and long delays between updates of valid OCSP responses.
# Automatic update of valid OCSP responses loaded during init will not be
# tested because by design, such a response would no be automatically updated
# until init+1H.
#
# This test will then focus on certificates that have a specified OCSP URI but
# no known OCSP response. For those certificates, OCSP requests are sent as
# soon as possible by the update task.
#
# The ocsp responder used in all the tests will be an openssl using the
# certificate database in ocsp_update/index.txt. It will listen on port 12346
# which is not the same as the one specified in the certificates' OCSP URI
# which point to port 12345. The link from port 12345 to port 12346 will be
# ensured through HAProxy instances that will enable logs, later used as a
# synchronization mean.
#
# Unfortunately some arbitrary "sleep" calls are still needed to leave some
# time for the ocsp update task to actually process the ocsp responses and
# reinsert them into the tree. This explains why the test's mode is set to
# "slow".
#
# The fourth test case focuses on the "update ssl ocsp-response" CLI command
# and tests two certificates that have a known OCSP response loaded during init
# but no OCSP auto update. The only difference between the two certificates is
# that one has a separate .issuer file while the other one has the issuer
# certificate directly in the main .pem file.
#
# If this test does not work anymore:
# - Check that you have openssl and socat

varnishtest "Test the OCSP auto update feature"
feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.7-dev0)'"
feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL) && !ssllib_name_startswith(BoringSSL) && openssl_version_atleast(1.1.1)'"
feature cmd "command -v openssl && command -v socat"
feature ignore_unknown_macro


###################
#                 #
# FIRST TEST CASE #
#                 #
###################

# No automatic update should occur in this test case since we load two already
# valid OCSP responses during init which have a "Next Update" date really far
# in the future. So they should only be updated after one hour.
# This test will only be the most basic one where we check that ocsp response
# loading still works as expected.

haproxy h1 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h1/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        option logasap
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-fe
        bind "${tmpdir}/ssl.sock" ssl crt multicert/server_ocsp.pem ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200
} -start


# We should have two distinct ocsp responses known that were loaded at build time
haproxy h1 -cli {
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"

    send "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    expect ~ "Cert Status: revoked"

    send "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"
    expect ~ "Cert Status: good"
}

haproxy h1 -wait



####################
#                  #
# SECOND TEST CASE #
#                  #
####################

# This test will focus on two separate certificates that have the same OCSP uri
# (http://ocsp.haproxy.com:12345) but no OCSP response loaded at build time.
# The update mode is set to 'on' in the two crt-lists used. The two ocsp
# responses should then be fetched automatically after init. We use an http
# listener as a rebound on which http log is enabled towards Syslog_http. This
# ensures that two requests are sent by the ocsp auto update task and it
# enables to use a barrier to synchronize the ocsp task and the subsequent cli
# calls. Thanks to the barrier we know that when calling "show ssl
# ocsp-response" on the cli, the two answers should already have been received
# and processed.

process p1 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 2 -ndays 1 -port 12346 -timeout 5" -start

barrier b1 cond 2 -cyclic

syslog Syslog_http -level info {
    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAV HTTP/1.1"

    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAW HTTP/1.1"

    barrier b1 sync
} -start

haproxy h2 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h2/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-rsa-fe
        bind "${tmpdir}/ssl2.sock" ssl crt-list ${testdir}/ocsp_update/multicert_rsa.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    frontend ssl-ecdsa-fe
        bind "${tmpdir}/ssl3.sock" ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        log ${Syslog_http_addr}:${Syslog_http_port} local0
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

barrier b1 sync

shell "sleep 1"

# We should have two distinct ocsp IDs known that were loaded at build time and
# the responses' contents should have been filled automatically by the ocsp
# update task after init
haproxy h2 -cli {
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"

    send "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    expect ~ "Cert Status: revoked"

    send "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"
    expect ~ "Cert Status: revoked"
}

haproxy h2 -wait
process p1 -wait -expect-exit 0


###################
#                 #
# THIRD TEST CASE #
#                 #
###################

# This test will be roughly the same as the second one but one of the crt-lists
# will not enable ocsp-update on its certificate. Only one request should then
# be sent.

process p2 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 1 -ndays 1 -port 12346 -timeout 5" -start

barrier b2 cond 2 -cyclic

syslog Syslog_http2 -level info {
    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAV HTTP/1.1"

    barrier b2 sync
} -start

haproxy h3 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h3/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-rsa-fe
        bind "${tmpdir}/ssl4.sock" ssl crt-list ${testdir}/ocsp_update/multicert_rsa.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    frontend ssl-ecdsa-fe
        bind "${tmpdir}/ssl5.sock" ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa_no_update.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        log ${Syslog_http2_addr}:${Syslog_http2_port} local0
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

barrier b2 sync

shell "sleep 1"

# We should have a single ocsp ID known that was loaded at build time and the
# response should be filled
haproxy h3 -cli {
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    send "show ssl ocsp-response"
    expect !~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"

    send "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015"
    expect ~ "Cert Status: revoked"
}

haproxy h3 -wait
process p2 -wait



####################
#                  #
# FOURTH TEST CASE #
#  (CLI COMMAND)   #
#                  #
####################

process p3 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 2 -ndays 1 -port 12346 -timeout 5" -start

haproxy h4 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h4/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-rsa-ocsp
        bind "${tmpdir}/ssl5.sock" ssl crt ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    frontend ssl-ecdsa-ocsp
        bind "${tmpdir}/ssl6.sock" ssl crt ${testdir}/ocsp_update/multicert/server_ocsp_ecdsa.pem ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        bind "127.0.0.1:12345"
        http-response set-var(proc.processed) int(1)
        server s1 "127.0.0.1:12346"
} -start

# We need to "enable" the cli with a first cli call before using it only through socats
haproxy h4 -cli {
    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"
}

# We should have two OCSP responses loaded during init
shell {
    responses=$(echo "show ssl ocsp-response" | socat "${tmpdir}/h4/stats" -)

    [ $(echo "$responses" | grep -c "^Certificate ID key") -eq 2 ] && \
        echo "$responses" | grep "Serial Number: 1016" && \
        echo "$responses" | grep "Serial Number: 1015"
}

shell {
    echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015" | socat "${tmpdir}/h4/stats" - | grep "Cert Status: revoked"
}

shell {
    echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016" | socat "${tmpdir}/h4/stats" - | grep "Cert Status: good"
}

# Update the first ocsp response (ckch_data has a non-NULL ocsp_issuer pointer)
shell {
    # Store the current "Produced At" in order to ensure that after the update
    # the OCSP response actually changed
    produced_at=$(echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015" | socat "${tmpdir}/h4/stats" - | grep "Produced At")

    echo "update ssl ocsp-response ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa" | socat "${tmpdir}/h4/stats" -
    while ! echo "get var proc.processed" | socat "${tmpdir}/h4/stats" - | grep 'proc.processed: type=sint value=<1>'
    do
        echo "get var proc.processed" | socat "${tmpdir}/h4/stats" - >> /tmp/toto
        sleep 0.5
    done

    echo "experimental-mode on;set var proc.processed int(0)" | socat "${tmpdir}/h4/stats" -

    ocsp_response=$(echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015" | socat "${tmpdir}/h4/stats" -)
    new_produced_at=$(echo "$ocsp_response" | grep "Produced At")

    echo "$ocsp_response" | grep -q "Serial Number: 1015" && \
        echo "$ocsp_response" | grep -q "Cert Status: revoked" && \
        [ "$new_produced_at" != "$produced_at" ]
}

# Update the second ocsp response (ckch_data has a NULL ocsp_issuer pointer)
shell {
    # Store the current "Produced At" in order to ensure that after the update
    # the OCSP response actually changed
    produced_at=$(echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016" | socat "${tmpdir}/h4/stats" - | grep "Produced At")

    echo "update ssl ocsp-response ${testdir}/ocsp_update/multicert/server_ocsp_ecdsa.pem" | socat "${tmpdir}/h4/stats" -
    while ! echo "get var proc.processed" | socat "${tmpdir}/h4/stats" - | grep 'proc.processed: type=sint value=<1>'
    do
        echo "get var proc.processed" | socat "${tmpdir}/h4/stats" - >> /tmp/toto
        sleep 0.5
    done

    echo "experimental-mode on;set var proc.processed int(0)" | socat "${tmpdir}/h4/stats" -

    ocsp_response=$(echo "show ssl ocsp-response 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016" | socat "${tmpdir}/h4/stats" -)
    new_produced_at=$(echo "$ocsp_response" | grep "Produced At")

    echo "$ocsp_response" | grep -q "Serial Number: 1016" && \
        echo "$ocsp_response" | grep -q "Cert Status: revoked" && \
        [ "$new_produced_at" != "$produced_at" ]
}

haproxy h4 -wait
process p3 -wait


####################
#                  #
# FIFTH TEST CASE  #
#  (CLI COMMAND)   #
#                  #
####################

# Test the "show ssl ocsp-updates" command as well as the new 'base64' parameter
# to the "show ssl ocsp-response" command.


process p5 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 2 -ndays 1 -port 12346 -timeout 5" -start

barrier b5 cond 2 -cyclic

syslog Syslog_http5 -level info {
    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAV HTTP/1.1"

    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAW HTTP/1.1"

    barrier b5 sync
} -start

haproxy h5 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h5/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-rsa-fe
        bind "${tmpdir}/ssl7.sock" ssl crt-list ${testdir}/ocsp_update/multicert_rsa.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    frontend ssl-ecdsa-fe
        bind "${tmpdir}/ssl8.sock" ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        log ${Syslog_http5_addr}:${Syslog_http5_port} local0
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

barrier b5 sync

shell "sleep 1"

# Use "show ssl ocsp-updates" CLI command
# We should have one line per OCSP response and each one of them should have been successfully updated once
# The command's output follows this format:
# OCSP Certid | Next Update | Last Update | Successes | Failures | Last Update Status | Last Update Status (str)
haproxy h5 -cli {
    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015 .*| 1 | 0 | 1 | Update successful"

    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016 .*| 1 | 0 | 1 | Update successful"
}

# Use "show ssl ocsp-response" command to dump an OCSP response in base64
shell {
    ocsp_resp_file="${tmpdir}.ocsp_resp.der"

   echo "show ssl ocsp-response base64 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015" | socat "${tmpdir}/h5/stats" - | base64 -d > $ocsp_resp_file

   if [ $? -eq 0 ]
   then
       ocsp_resp_txt="$(openssl ocsp -respin $ocsp_resp_file -noverify -text)"
       echo "$ocsp_resp_txt" | grep "Issuer Name Hash: 8A83E0060FAFF709CA7E9B95522A2E81635FDA0A" && \
       echo "$ocsp_resp_txt" | grep "Issuer Key Hash: F652B0E435D5EA923851508F0ADBE92D85DE007A" && \
       echo "$ocsp_resp_txt" | grep "Serial Number: 1015" && \
       echo "$ocsp_resp_txt" | grep "Cert Status: revoked"
   else
       return 1
   fi
}

haproxy h5 -wait
process p5 -wait


####################
#                  #
# SIXTH TEST CASE  #
#                  #
####################

# Check that a new certificate added via the CLI to a crt-list with
# the 'ocsp-update on' option will be taken into account by the OCSP
# auto update task
#
process p6 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 1 -ndays 1 -port 12346 -timeout 5" -start

barrier b6 cond 2 -cyclic

syslog Syslog_http6 -level info {
    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAV HTTP/1.1"

    barrier b6 sync
} -start

haproxy h6 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h6/stats" level admin
        crt-base ${testdir}

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        option logasap
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-fe
        bind "${tmpdir}/ssl9.sock" ssl crt-list ${testdir}/simple.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        log ${Syslog_http6_addr}:${Syslog_http6_port} local0
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

# We need to "enable" the cli with a first cli call before using it only through socats
haproxy h6 -cli {
    send "show ssl cert"
    expect ~ ""
}

# Create a new certificate that has an OCSP uri and add it to the
# existing CLI with the 'ocsp-update on' command.
shell {
    echo "new ssl cert ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa" | socat "${tmpdir}/h6/stats" -
    printf "set ssl cert ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa <<\n$(cat ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa)\n\n" | socat "${tmpdir}/h6/stats" -
    printf "set ssl cert ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa.issuer <<\n$(cat ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa.issuer)\n\n" | socat "${tmpdir}/h6/stats" -
    echo "commit ssl cert ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa" | socat "${tmpdir}/h6/stats" -

    printf "add ssl crt-list ${testdir}/simple.crt-list <<\n${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa [ocsp-update on] foo.com\n\n" | socat "${tmpdir}/h6/stats" -
}

barrier b6 sync

shell "sleep 1"

haproxy h6 -cli {
    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016 .*| 1 | 0 | 1 | Update successful"
}

haproxy h6 -wait
process p6 -wait


######################
#                    #
# SEVENTH TEST CASE  #
#                    #
######################

#
# Check that removing crt-list instances does not remove the OCSP responses
# from the tree but that they will not be auto updated anymore if the last
# instance is removed (via del ssl crt-list).
#

haproxy h7 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h7/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        option logasap
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-fe
        bind "${tmpdir}/ssl-h7.sock" ssl crt-list ${testdir}/ocsp_update/multicert_both_certs.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

# Check that the two certificates are taken into account in the auto update process
haproxy h7 -cli {
    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015 .*"

    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016 .*"
}

# Remove the second line from the crt-list and check that the corresponding
# ocsp response was removed from the auto update list but is still present in the
# system
haproxy h7 -cli {
    send "del ssl crt-list ${testdir}/ocsp_update/multicert_both_certs.crt-list ${testdir}/ocsp_update/multicert/server_ocsp.pem.ecdsa"
    expect ~ "Entry.*deleted in crtlist"

    send "show ssl ocsp-updates"
    expect !~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016 .*"

    send "show ssl ocsp-response"
    expect ~ "Certificate ID key : 303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016"

    send "show ssl ocsp-response ${testdir}/ocsp_update/multicert/server_ocsp.pem.ecdsa"
    expect ~ ".* Cert Status: good.*"
}

# Add the previously removed crt-list line with auto-update enabled and check that
# the ocsp response appears in the auto update list
shell {
    printf "add ssl crt-list ${testdir}/ocsp_update/multicert_both_certs.crt-list <<\nmulticert/server_ocsp.pem.ecdsa [ocsp-update on] foo.bar\n\n" | socat "${tmpdir}/h7/stats" - | grep "Inserting certificate.*in crt-list"
}

haproxy h7 -cli {
    send "show ssl ocsp-updates"
    expect ~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021016 .*"
}

# Check that the auto update option consistency check work even when crt-list
# lines are added through the cli
shell {
    printf "add ssl crt-list ${testdir}/ocsp_update/multicert_both_certs.crt-list <<\nmulticert/server_ocsp.pem.ecdsa foo.foo\n\n" | socat "${tmpdir}/h7/stats" - | grep "Incompatibilities found in OCSP update mode for certificate"
}

haproxy h7 -wait

####################
#                  #
# EIGTH TEST CASE  #
#                  #
####################

#
# Check that a certificate created through the CLI and which does not have ocsp
# update enabled can be updated via "update ssl ocsp-response" command.
#

process p8 "openssl ocsp -index ${testdir}/ocsp_update/index.txt -rsigner ${testdir}/ocsp_update/ocsp.haproxy.com.pem -CA ${testdir}/ocsp_update/ocsp_update_rootca.crt -nrequest 1 -ndays 1 -port 12346 -timeout 5" -start

barrier b8 cond 2 -cyclic

syslog Syslog_h8 -level info {
    recv
    expect ~ "GET /MEMwQTA%2FMD0wOzAJBgUrDgMCGgUABBSKg%2BAGD6%2F3Ccp%2Bm5VSKi6BY1%2FaCgQU9lKw5DXV6pI4UVCPCtvpLYXeAHoCAhAV HTTP/1.1"

    barrier b8 sync
} -start


haproxy h8 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h8/stats" level admin
        crt-base ${testdir}/ocsp_update

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        option logasap
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"

    frontend ssl-fe
        bind "${tmpdir}/ssl-h8.sock" ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa_no_update.crt-list ca-file ${testdir}/set_cafile_rootCA.crt verify none crt-ignore-err all
        http-request return status 200

    listen http_rebound_lst
        mode http
        option httplog
        log ${Syslog_h8_addr}:${Syslog_h8_port} local0
        bind "127.0.0.1:12345"
        server s1 "127.0.0.1:12346"
} -start

# We need to "enable" the cli with a first cli call before using it only through socats
haproxy h8 -cli {
    send "show ssl cert"
    expect ~ ""
}

# Create a new certificate and add it in the crt-list with ocsp auto-update enabled
shell {
    echo "new ssl cert ${testdir}/ocsp_update/rsa.pem" | socat "${tmpdir}/h8/stats" -
    printf "set ssl cert ${testdir}/ocsp_update/rsa.pem <<\n$(cat ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa)\n\n" | socat "${tmpdir}/h8/stats" -
    printf "set ssl cert ${testdir}/ocsp_update/rsa.pem.issuer <<\n$(cat ${testdir}/ocsp_update/ocsp_update_rootca.crt)\n\n" | socat "${tmpdir}/h8/stats" -
    printf "set ssl cert ${testdir}/ocsp_update/rsa.pem.ocsp <<\n$(base64 -w 1000 ${testdir}/ocsp_update/multicert/server_ocsp.pem.rsa.ocsp)\n\n" | socat "${tmpdir}/h8/stats" -
    echo "commit ssl cert ${testdir}/ocsp_update/rsa.pem" | socat "${tmpdir}/h8/stats" -

    printf "add ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa_no_update.crt-list <<\nrsa.pem [ocsp-update off] foo.bar\n\n" | socat "${tmpdir}/h8/stats" -
}

# Check that the line is in the crt-list
haproxy h8 -cli {
    send "show ssl crt-list ${testdir}/ocsp_update/multicert_ecdsa_no_update.crt-list"
    expect ~ "${testdir}/ocsp_update/rsa.pem .* foo.bar"
}

# Check that the new certificate is NOT in the auto update list
haproxy h8 -cli {
    send "show ssl ocsp-updates"
    expect !~ "303b300906052b0e03021a050004148a83e0060faff709ca7e9b95522a2e81635fda0a0414f652b0e435d5ea923851508f0adbe92d85de007a02021015.*"
}

shell {
    echo "update ssl ocsp-response ${testdir}/ocsp_update/rsa.pem" | socat "${tmpdir}/h8/stats" -
}

shell "sleep 1"

barrier b8 sync

haproxy h8 -cli {
    send "show ssl ocsp-response ${testdir}/ocsp_update/rsa.pem"
    expect ~ ".* Cert Status: revoked.*"
}

haproxy h8 -wait
process p8 -wait