Adding upstream version 2.1.9+dfsg.upstream/2.1.9+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 757 insertions, 0 deletions

diff --git a/src/Locale.c b/src/Locale.c
new file mode 100644
index 0000000..09333b0
--- /dev/null
+++ b/src/Locale.c
@@ -0,0 +1,757 @@
+/*---------------------------------------------------------------
+ * Copyright (c) 1999,2000,2001,2002,2003
+ * The Board of Trustees of the University of Illinois
+ * All Rights Reserved.
+ *---------------------------------------------------------------
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software (Iperf) and associated
+ * documentation files (the "Software"), to deal in the Software
+ * without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute,
+ * sublicense, and/or sell copies of the Software, and to permit
+ * persons to whom the Software is furnished to do
+ * so, subject to the following conditions:
+ *
+ *
+ * Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and
+ * the following disclaimers.
+ *
+ *
+ * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimers in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ *
+ * Neither the names of the University of Illinois, NCSA,
+ * nor the names of its contributors may be used to endorse
+ * or promote products derived from this Software without
+ * specific prior written permission.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE CONTIBUTORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ * ________________________________________________________________
+ * National Laboratory for Applied Network Research
+ * National Center for Supercomputing Applications
+ * University of Illinois at Urbana-Champaign
+ * http://www.ncsa.uiuc.edu
+ * ________________________________________________________________
+ *
+ * Locale.c
+ * by Ajay Tirumala <tirumala@ncsa.uiuc.edu>
+ * & Mark Gates <mgates@nlanr.net>
+ * -------------------------------------------------------------------
+ * Strings and other stuff that is locale specific.
+ * ------------------------------------------------------------------- */
+#include "headers.h"
+#include "version.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/* -------------------------------------------------------------------
+ * usage
+ * ------------------------------------------------------------------- */
+
+const char usage_short[] = "\
+Usage: %s [-s|-c host] [options]\n\
+Try `%s --help' for more information.\n";
+
+const char usage_long1[] = "\
+Usage: iperf [-s|-c host] [options]\n\
+       iperf [-h|--help] [-v|--version]\n\
+\n\
+Client/Server:\n\
+  -b, --bandwidth #[kmgKMG | pps]  bandwidth to read/send at in bits/sec or packets/sec\n\
+  -e, --enhanced    use enhanced reporting giving more tcp/udp and traffic information\n\
+  -f, --format    [kmgKMG]   format to report: Kbits, Mbits, KBytes, MBytes\n\
+      --hide-ips           hide ip addresses and host names within outputs\n\
+  -i, --interval  #        seconds between periodic bandwidth reports\n\
+  -l, --len       #[kmKM]    length of buffer in bytes to read or write (Defaults: TCP=128K, v4 UDP=1470, v6 UDP=1450)\n\
+  -m, --print_mss          print TCP maximum segment size\n\
+  -o, --output    <filename> output the report or error message to this specified file\n\
+  -p, --port      #        client/server port to listen/send on and to connect\n\
+      --permit-key         permit key to be used to verify client and server (TCP only)\n\
+      --sum-only           output sum only reports\n\
+  -u, --udp                use UDP rather than TCP\n\
+      --utc                use coordinated universal time (UTC) with time output\n\
+  -w, --window    #[KM]    TCP window size (socket buffer size)\n"
+#ifdef HAVE_SCHED_SETSCHEDULER
+"  -z, --realtime           request realtime scheduler\n"
+#endif
+"  -B, --bind <host>[:<port>][%<dev>] bind to <host>, ip addr (including multicast address) and optional port and device\n\
+  -C, --compatibility      for use with older versions does not sent extra msgs\n\
+      --NUM_REPORT_STRUCTS increase the shared memory between the traffic threads and the reporter thread (default is 10,000 entries)\n\
+  -M, --mss       #        set TCP maximum segment size using TCP_MAXSEG\n\
+  -N, --nodelay            set TCP no delay, disabling Nagle's Algorithm\n\
+  -S, --tos       #        set the socket's IP_TOS (byte) field\n\
+  -Z, --tcp-congestion <algo>  set TCP congestion control algorithm (Linux only)\n\
+\n\
+Server specific:\n\
+  -p, --port      #[-#]    server port(s) to listen on/connect to\n\
+  -s, --server             run in server mode\n\
+  -1, --singleclient       run one server at a time\n\
+      --histograms         enable latency histograms\n\
+      --jitter-histograms  enable jitter histograms\n\
+      --permit-key-timeout set the timeout for a permit key in seconds\n\
+      --tcp-rx-window-clamp set the TCP receive window clamp size in bytes\n\
+      --tap-dev   #[<dev>] use TAP device to receive at L2 layer\n\
+  -t, --time      #        time in seconds to listen for new connections as well as to receive traffic (default not set)\n\
+  -B, --bind <ip>[%<dev>]  bind to multicast address and optional device\n\
+  -U, --single_udp         run in single threaded UDP mode\n\
+      --sum-dstip          sum traffic threads based upon destination ip address (default is src ip)\n\
+  -D, --daemon             run the server as a daemon\n"
+#ifdef WIN32
+"  -R, --remove             remove service in win32\n"
+#endif
+"  -V, --ipv6_domain        Enable IPv6 reception by setting the domain and socket to AF_INET6 (Can receive on both IPv4 and IPv6)\n"
+;
+
+const char usage_long2[] = "\
+\n\
+Client specific:\n\
+      --bounceback         request a bounceback test (use -l for size, defaults to 100 bytes)\n\
+      --bounceback-hold    request the server to insert a delay of n milliseconds between its read and write\n\
+      --bounceback-period  request the client schedule a send every n milliseconds\n\
+      --bounceback-no-quickack request the server not set the TCP_QUICKACK socket option (disabling TCP ACK delays) during a bounceback test\n\
+  -c, --client    <host>   run in client mode, connecting to <host>\n\
+      --connect-only       run a connect only test\n\
+      --connect-retries #  number of times to retry tcp connect\n\
+  -d, --dualtest           Do a bidirectional test simultaneously (multiple sockets)\n\
+      --fq-rate #[kmgKMG]  bandwidth to socket pacing\n\
+      --full-duplex        run full duplex test using same socket\n\
+      --ipg                set the the interpacket gap (milliseconds) for packets within an isochronous frame\n\
+      --isochronous <frames-per-second>:<mean>,<stddev> send traffic in bursts (frames - emulate video traffic)\n\
+      --incr-dstip         Increment the destination ip with parallel (-P) traffic threads\n\
+      --incr-dstport       Increment the destination port with parallel (-P) traffic threads\n\
+      --incr-srcip         Increment the source ip with parallel (-P) traffic threads\n\
+      --incr-srcport       Increment the source port with parallel (-P) traffic threads\n\
+      --local-only         Set don't route on socket\n\
+      --near-congestion=[w] Use a weighted write delay per the sampled TCP RTT (experimental)\n\
+      --no-connect-sync    No sychronization after connect when -P or parallel traffic threads\n\
+      --no-udp-fin         No final server to client stats at end of UDP test\n\
+  -n, --num       #[kmgKMG]    number of bytes to transmit (instead of -t)\n\
+  -r, --tradeoff           Do a fullduplexectional test individually\n\
+      --tcp-quickack       set the socket's TCP_QUICKACK option (off by default)\n\
+      --tcp-write-prefetch set the socket's TCP_NOTSENT_LOWAT value in bytes and use event based writes\n\
+      --tcp-write-times    measure the socket write times at the application level\n\
+  -t, --time      #        time in seconds to transmit for (default 10 secs)\n\
+      --trip-times         enable end to end measurements (requires client and server clock sync)\n\
+      --txdelay-time       time in seconds to hold back after connect and before first write\n\
+      --txstart-time       unix epoch time to schedule first write and start traffic\n\
+  -B, --bind [<ip> | <ip:port>] bind ip (and optional port) from which to source traffic\n\
+  -F, --fileinput <name>   input the data to be transmitted from a file\n\
+  -H, --ssm-host <ip>      set the SSM source, use with -B for (S,G) \n\
+  -I, --stdin              input the data to be transmitted from stdin\n\
+  -L, --listenport #       port to receive fullduplexectional tests back on\n\
+  -P, --parallel  #        number of parallel client threads to run\n"
+#ifndef WIN32
+"  -R, --reverse            reverse the test (client receives, server sends)\n"
+#else
+"  -R                       Remove the windows service\n"
+"      --reverse            reverse the test (client receives, server sends)\n"
+#endif
+"  -S, --tos                IP DSCP or tos settings\n\
+  -T, --ttl       #        time-to-live, for multicast (default 1)\n\
+      --working-load request a concurrent TCP stream\n\
+  -V, --ipv6_domain        Set the domain to IPv6 (send packets over IPv6)\n\
+  -X, --peer-detect        perform server version detection and version exchange\n\
+\n\
+Miscellaneous:\n\
+  -x, --reportexclude [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings) V(server) reports\n\
+  -y, --reportstyle C      report as a Comma-Separated Values\n\
+  -h, --help               print this message and quit\n\
+  -v, --version            print version information and quit\n\
+\n\
+[kmgKMG] Indicates options that support a k,m,g,K,M or G suffix\n\
+Lowercase format characters are 10^3 based and uppercase are 2^n based\n\
+(e.g. 1k = 1000, 1K = 1024, 1m = 1,000,000 and 1M = 1,048,576)\n\
+\n\
+Accepted tos values are: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43,\n\
+cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, le, nqb, nqb2, ac_be, ac_bk, ac_vi, ac_vo, lowdelay, throughput,\n\
+reliability, or a numeric value.\n\
+\n\
+The TCP window size option can be set by the environment variable\n\
+TCP_WINDOW_SIZE. Most other options can be set by an environment variable\n\
+IPERF_<long option name>, such as IPERF_BANDWIDTH.\n\
+\n\
+Source at <http://sourceforge.net/projects/iperf2/>\n\
+Report bugs to <iperf-users@lists.sourceforge.net>\n";
+
+// include a description of the threading in the version
+#if   defined( HAVE_POSIX_THREAD )
+    #define IPERF_THREADS "pthreads"
+#elif defined( HAVE_WIN32_THREAD )
+    #define IPERF_THREADS "win32 threads"
+#else
+    #define IPERF_THREADS "single threaded"
+#endif
+
+const char version[] =
+"iperf version " IPERF_VERSION " (" IPERF_VERSION_DATE ") " IPERF_THREADS "\n";
+
+/* -------------------------------------------------------------------
+ * settings
+ * ------------------------------------------------------------------- */
+
+const char separator_line[] =
+"------------------------------------------------------------\n";
+
+const char server_port[] =
+"Server listening on %s port %d\n";
+
+const char client_port[] =
+"Client connecting to %s, %s port %d\n";
+
+const char server_pid_port[] =
+"Server listening on %s port %d with pid %d\n";
+
+const char server_pid_portrange[] =
+"Server listening on %s ports %d-%d with pid %d\n";
+
+const char client_pid_port[] =
+"Client connecting to %s, %s port %d with pid %d (%d flows)\n";
+
+const char client_pid_port_dev[] =
+"Client connecting to %s, %s port %d with pid %d via %s (%d flows)\n";
+
+const char bind_address[] =
+"Binding to local address %s\n";
+
+const char bind_address_iface[] =
+"Binding to local address %s and iface %s\n";
+
+const char bind_address_iface_taptun[] =
+"Using virtual iface %s (AF_PACKET & SOCK_RAW)\n";
+
+const char multicast_ttl[] =
+"Setting multicast TTL to %d\n";
+
+const char join_multicast[] =
+"Joining multicast group  %s\n";
+
+const char join_multicast_sg[] =
+"Joining multicast (S,G)=%s,%s\n";
+
+const char join_multicast_starg_dev[] =
+"Joining multicast (*,G)=*,%s w/iface %s\n";
+
+const char join_multicast_sg_dev[] =
+"Joining multicast (S,G)=%s,%s w/iface %s\n";
+
+const char client_datagram_size[] =
+"Sending %d byte datagrams, IPG target: %.2f us\n";
+
+const char client_datagram_size_kalman[] =
+"Sending %d byte datagrams, IPG target: %.2f us (kalman adjust)\n";
+
+const char server_datagram_size[] =
+"Receiving %d byte datagrams\n";
+
+const char tcp_window_size[] =
+"TCP window size";
+
+const char udp_buffer_size[] =
+"UDP buffer size";
+
+const char window_default[] =
+"(default)";
+
+const char wait_server_threads[] =
+"Waiting for server threads to complete. Interrupt again to force quit.\n";
+
+const char client_isochronous[] =
+"Isochronous: %0.2f frames/sec mean=%s/s, stddev=%s/s, Period/IPG=%0.2f/%.3f ms\n";
+
+const char client_burstperiod[] =
+"Bursting: %s every %0.2f second(s)\n";
+
+const char client_burstperiodcount[] =
+"Bursting: %s writes %d times every %0.2f second(s)\n";
+
+const char client_bounceback[] =
+"Bounce-back test (size=%s) (server hold req=%d usecs & tcp_quickack)\n";
+
+const char client_bounceback_noqack[] =
+"Bounce-back test (size=%s) (server hold req=%d usecs)\n";
+
+const char server_burstperiod[] =
+"Burst wait timeout set to (2 * %0.2f) seconds (use --burst-period=<n secs> to change)\n";
+
+const char client_fq_pacing [] =
+"fair-queue socket pacing set to %s/s\n";
+
+/* -------------------------------------------------------------------
+ * Legacy reports
+ * ------------------------------------------------------------------- */
+
+const char report_bw_header[] =
+"[ ID] Interval       Transfer     Bandwidth\n";
+
+const char report_bw_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_sum_bw_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_sumcnt_bw_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_bw_jitter_loss_header[] =
+"[ ID] Interval       Transfer     Bandwidth        Jitter   Lost/Total Datagrams\n";
+
+const char report_bw_jitter_loss_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%)\n";
+
+const char report_sum_bw_jitter_loss_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec   %" PRIdMAX "/%" PRIdMAX " (%.2g%%)\n";
+
+const char report_sumcnt_bw_jitter_loss_header[] =
+"[SUM-cnt] Interval     Transfer     Bandwidth       Lost/Total    PPS\n";
+
+const char report_sumcnt_bw_jitter_loss_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %8.0f pps\n";
+
+/* -------------------------------------------------------------------
+ * Enhanced reports (per -e)
+ * ------------------------------------------------------------------- */
+const char report_sumcnt_bw_header[] =
+"[SUM-cnt] Interval       Transfer     Bandwidth\n";
+
+const char client_report_epoch_start_current[] =
+"[%3d] Client traffic to start in %d seconds at %s current time is %s\n";
+
+const char client_write_size[] =
+"Write buffer size";
+
+const char server_read_size[] =
+"Read buffer size";
+
+const char report_bw_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_sum_bw_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_bw_read_enhanced_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth       Reads=Dist\n";
+
+const char report_bw_read_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_sumcnt_bw_read_enhanced_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer    Bandwidth       Reads=Dist\n";
+
+const char report_sumcnt_bw_read_enhanced_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_sumcnt_bw_read_triptime_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer    Bandwidth  InP  Reads=Dist\n";
+
+const char report_sumcnt_bw_read_triptime_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec %s  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_bw_read_enhanced_netpwr_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth    Burst Latency avg/min/max/stdev (cnt/size) inP NetPwr  Reads=Dist\n";
+
+const char report_bw_read_enhanced_netpwr_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %.3f/%.3f/%.3f/%.3f ms (%d/%d) %s %s  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_bw_isoch_enhanced_netpwr_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth    Burst Latency avg/min/max/stdev (cnt/size) NetPwr  Reads=Dist\n";
+
+const char report_bw_isoch_enhanced_netpwr_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %.3f/%.3f/%.3f/%.3f ms (%d/%d) %s  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_sum_bw_read_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+const char report_triptime_enhanced_format[] =
+"%s" IPERFTimeFrmt " trip-time (3WHS done->fin+finack) = %.4f sec\n";
+
+#if HAVE_TCP_STATS
+const char report_client_bb_bw_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth         BB cnt=avg/min/max/stdev         Rtry  Cwnd/RTT    RPS\n";
+
+const char report_client_bb_bw_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec    %" PRIdMAX "=%.3f/%.3f/%.3f/%.3f ms %4d %4dK/%u us    %s rps\n";
+#else
+const char report_client_bb_bw_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth         BB cnt=avg/min/max/stdev    RPS\n";
+
+const char report_client_bb_bw_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec    %" PRIdMAX "=%.3f/%.3f/%.3f/%.3f ms    %s rps\n";
+#endif
+const char report_client_bb_bw_triptime_format[] =
+"%s" IPERFTimeFrmt " sec  OWD Delays (ms) Cnt=%" PRIdMAX " To=%.3f/%.3f/%.3f/%.3f From=%.3f/%.3f/%.3f/%.3f Asymmetry=%.3f/%.3f/%.3f/%.3f    %s rps\n";
+
+const char report_write_enhanced_write_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth       Write/Err  Rtry     Cwnd/RTT        NetPwr  write-times avg/min/max/stdev (cnt)\n";
+
+const char report_write_enhanced_write_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %10" PRIdMAX "%8dK/%u us  %s  %.3f/%.3f/%.3f/%.3f ms (%" PRIdMAX ")\n";
+
+const char report_write_enhanced_nocwnd_write_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %10" PRIdMAX "       NA/%u us  %s  %.3f/%.3f/%.3f/%.3f ms (%" PRIdMAX ")\n";
+
+
+#if HAVE_TCP_STATS
+const char report_bw_write_enhanced_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth       Write/Err  Rtry     Cwnd/RTT(var)        NetPwr\n";
+
+const char report_sum_bw_write_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%10" PRIdMAX "\n";
+
+const char report_bw_write_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%10" PRIdMAX " %8dK/%u(%u) us  %s\n";
+
+const char report_bw_write_enhanced_nocwnd_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %10" PRIdMAX "       NA/%u us  %s\n";
+
+const char report_write_enhanced_isoch_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth      Write/Err  Rtry     Cwnd/RTT     isoch:tx/miss/slip  NetPwr\n";
+
+const char report_write_enhanced_isoch_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %8d %8dK/%u us  %9" PRIuMAX "/%" PRIuMAX "/%" PRIuMAX "        %s\n";
+
+const char report_write_enhanced_isoch_nocwnd_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %10" PRIdMAX "    NA/%u us  %9" PRIuMAX "/%" PRIuMAX "/%" PRIuMAX " %s\n";
+
+#else
+
+const char report_bw_write_enhanced_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer    Bandwidth       Write/Err\n";
+
+const char report_bw_write_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "\n";
+
+const char report_sum_bw_write_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "\n";
+
+const char report_write_enhanced_isoch_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth      Write/Err  isoch:tx/miss/slip\n";
+
+const char report_write_enhanced_isoch_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%9" PRIuMAX "/%" PRIuMAX "/%" PRIuMAX "\n";
+#endif
+
+const char report_sumcnt_bw_write_enhanced_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer    Bandwidth       Write/Err  Rtry\n";
+
+const char report_sumcnt_bw_write_enhanced_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%10" PRIdMAX "\n";
+
+const char report_bw_pps_enhanced_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth      Write/Err  PPS\n";
+
+const char report_bw_pps_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %8.0f pps\n";
+
+const char report_sumcnt_bw_pps_enhanced_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer     Bandwidth      Write/Err  PPS\n";
+
+const char report_sumcnt_bw_pps_enhanced_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %8.0f pps\n";
+
+const char report_sumcnt_udp_enhanced_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer     Bandwidth      Lost/Total  PPS\n";
+
+const char report_sumcnt_udp_enhanced_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX " %8.0f pps\n";
+
+const char report_sumcnt_udp_triptime_header[] =
+"[SUM-cnt] Interval" IPERFTimeSpace "Transfer     Bandwidth      Lost/Total  Rx/inP PPS\n";
+
+const char report_sumcnt_udp_triptime_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "   %" PRIdMAX "/%.0f  %8.0f pps\n";
+
+const char report_bw_pps_enhanced_isoch_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth      Write/Err  PPS  isoch:tx/miss/slip\n";
+
+const char report_bw_pps_enhanced_isoch_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%8.0f pps  %3" PRIuMAX "/%" PRIuMAX "/%" PRIuMAX "\n";
+
+const char report_sum_bw_pps_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec  %" PRIdMAX "/%" PRIdMAX "%8.0f pps\n";
+
+const char report_bw_jitter_loss_pps_header[] =
+"[ ID] Interval       Transfer     Bandwidth        Jitter   Lost/Total Datagrams   PPS\n";
+
+const char report_bw_jitter_loss_pps_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) %8.0f pps\n";
+
+const char report_bw_jitter_loss_enhanced_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth        Jitter   Lost/Total \
+ Latency avg/min/max/stdev PPS NetPwr\n";
+
+const char report_bw_jitter_loss_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) %.3f/%.3f/%.3f/%.3f ms %.0f pps %s\n";
+
+const char report_bw_jitter_loss_enhanced_triptime_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth        Jitter   Lost/Total \
+ Latency avg/min/max/stdev PPS  Rx/inP  NetPwr\n";
+
+const char report_bw_jitter_loss_enhanced_triptime_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) %.3f/%.3f/%.3f/%.3f ms %.0f pps %" PRIdMAX "/%s %s\n";
+
+const char report_bw_jitter_loss_enhanced_isoch_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth        Jitter   Lost/Total \
+ Latency avg/min/max/stdev PPS  NetPwr  Isoch:rx/lost\n";
+
+const char report_bw_jitter_loss_enhanced_isoch_triptime_header[] =
+"[ ID] Interval" IPERFTimeSpace "Transfer     Bandwidth        Jitter   Lost/Total \
+Latency avg/min/max/stdev  PPS  Frame:rx/lost  Frame-latency avg/min/max/stdev  NetPwr\n";
+
+const char report_bw_jitter_loss_enhanced_isoch_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) %.3f/%.3f/%.3f/%.3f ms %.0f pps  %3d/%d  %.3f/%.3f/%.3f/%.3f ms %s\n";
+
+const char report_sum_bw_jitter_loss_enhanced_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%)  %.0f pps\n";
+
+const char report_sumcnt_bw_jitter_loss_enhanced_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%)  %.0f pps\n";
+
+const char report_bw_jitter_loss_suppress_enhanced_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) -/-/-/- ms %.0f pps\n";
+
+/*
+ * Frame interval reports
+ */
+#define IPERFFTimeFrmt "%4.4f-%4.4f"
+#define IPERFFTimeSpace "  "
+const char report_frame_jitter_loss_enhanced_header[] =
+"[ ID] Interval(f-transit)" IPERFFTimeSpace "Transfer     Bandwidth    FrameID   Jitter   Lost/Total \
+ Latency avg/min/max/stdev PPS  inP NetPwr\n";
+
+const char report_frame_jitter_loss_enhanced_format[] =
+"%s" IPERFFTimeFrmt "(%0.4f) sec %ss  %ss/sec %" PRIdMAX "   %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) %.3f/%.3f/%.3f/%.3f ms %.0f pps %2.0f pkts %s\n";
+
+const char report_frame_jitter_loss_suppress_enhanced_format[] =
+"%s" IPERFTimeFrmt "(%0.4f) sec %" PRIdMAX " %ss  %ss/sec %" PRIdMAX "   %6.3f ms %" PRIdMAX "/%" PRIdMAX " (%.2g%%) -/-/-/- ms %.0f pps\n";
+
+const char report_frame_tcp_enhanced_header[] =
+"[ ID] Interval(f-transit)" IPERFFTimeSpace "Transfer     Bandwidth    FrameID\n";
+
+const char report_burst_read_tcp_header[] =
+"[ ID] Burst (start-end)" IPERFFTimeSpace "Transfer     Bandwidth       XferTime  (DC%)     Reads=Dist          NetPwr\n";
+
+const char report_burst_read_tcp_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms (%.2g%%)    %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d  %s\n";
+
+const char report_burst_read_tcp_final_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %.3f/%.3f/%.3f/%.3f ms  %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+#if HAVE_TCP_STATS
+const char report_burst_write_tcp_header[] =
+"[ ID] Burst (start-end)" IPERFFTimeSpace "Transfer     Bandwidth       XferTime  Write/Err  Rtry  Cwnd/RTT   NetPwr\n";
+
+const char report_burst_write_tcp_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX "%10" PRIdMAX "%8dK/%u %s\n";
+
+#else
+const char report_burst_write_tcp_header[] =
+"[ ID] Burst (start-end)" IPERFFTimeSpace "Transfer     Bandwidth       XferTime  Write/Err\n";
+
+const char report_burst_write_tcp_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX"\n";
+#endif
+
+const char report_burst_write_tcp_nocwnd_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec  %6.3f ms %" PRIdMAX "/%" PRIdMAX "%10" PRIdMAX "NA/%u %s\n";
+
+const char report_burst_write_tcp_final_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec               %" PRIdMAX "=%d:%d:%d:%d:%d:%d:%d:%d\n";
+
+/* -------------------------------------------------------------------
+ * Fullduplex reports
+ * ------------------------------------------------------------------- */
+const char report_bw_sum_fullduplex_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_bw_sum_fullduplex_enhanced_format[] =
+"[FD%d] " IPERFTimeFrmt " sec  %ss  %ss/sec\n";
+
+const char report_udp_fullduplex_header[] =
+"[ ID] Interval       Transfer     Bandwidth    Datagrams   PPS\n";
+
+const char report_sumcnt_udp_fullduplex_header[] =
+"[SUM-cnt] Interval       Transfer     Bandwidth    Datagrams   PPS\n";
+
+const char report_sumcnt_udp_fullduplex_format[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %ss  %ss/sec %" PRIdMAX "%8.0f pps\n";
+
+const char report_udp_fullduplex_format[] =
+"%s" IPERFTimeFrmt " sec  %ss  %ss/sec %" PRIdMAX "%8.0f pps\n";
+
+const char report_udp_fullduplex_enhanced_format[] =
+"[FD%d] " IPERFTimeFrmt " sec  %ss  %ss/sec %" PRIdMAX "%8.0f pps\n";
+
+const char report_udp_fullduplex_sum_format[] =
+"[SUM] " IPERFTimeFrmt " sec  %ss  %ss/sec %" PRIdMAX "%8.0f pps\n";
+
+/* -------------------------------------------------------------------
+ * Misc reports
+ * ------------------------------------------------------------------- */
+const char report_outoforder[] =
+"%s" IPERFTimeFrmt " sec  %d datagrams received out-of-order\n";
+
+const char report_sumcnt_outoforder[] =
+"[SUM-%d] " IPERFTimeFrmt " sec  %d datagrams received out-of-order\n";
+
+const char report_l2statistics[] =
+"%s" IPERFTimeFrmt " sec   L2 processing detected errors, total(length/checksum/unknown) = %" PRIdMAX "(%" PRIdMAX "/%" PRIdMAX "/%" PRIdMAX ")\n";
+
+const char report_sum_outoforder[] =
+"[SUM] " IPERFTimeFrmt " sec  %d datagrams received out-of-order\n";
+
+const char report_peer [] =
+"%slocal %s port %u connected with %s port %u%s\n";
+
+const char report_peer_dev [] =
+"%slocal %s%%%s port %u connected with %s port %u%s\n";
+
+const char report_peer_fail [] =
+"[drop] local %s port %u connection with %s port %u%s (permit key fail)\n";
+
+const char report_mss_unsupported[] =
+"%sMSS and MTU size unknown (TCP_MAXSEG not supported)\n";
+
+const char report_default_mss[] =
+"MSS size %d bytes\n";
+
+const char report_mss[] =
+"MSS req size %d bytes (per TCP_MAXSEG)\n";
+
+const char report_datagrams[] =
+"[%3d] Sent %d datagrams\n";
+
+const char report_sumcnt_datagrams[] =
+"[SUM-%d] Sent %d datagrams\n";
+
+const char report_sum_datagrams[] =
+"[SUM] Sent %d datagrams\n";
+
+const char server_reporting[] =
+"[%3d] Server Report:\n";
+
+const char reportCSV_peer[] =
+"%s,%u,%s,%u";
+
+const char report_l2length_error[] =
+"%s" IPERFTimeFrmt " sec  %d datagrams received out-of-order\n";
+
+/*-------------------------------------------------------------------
+ * CSV outputs
+ *------------------------------------------------------------------*/
+const char reportCSV_bw_format[] =
+"%s,%s,%d,%.1f-%.1f,%" PRIdMAX ",%" PRIdMAX "\n";
+
+const char reportCSV_bw_read_enhanced_format[] =
+"%s,%s,%d,%.1f-%.1f,%" PRIdMAX ",%" PRIdMAX ",%" PRIdMAX ",%d,%d,%d,%d,%d,%d,%d,%d\n";
+
+const char reportCSV_bw_write_enhanced_format[] =
+"%s,%s,%d,%.1f-%.1f,%" PRIdMAX ",%" PRIdMAX ",%" PRIdMAX ",%" PRIdMAX ",%" PRIdMAX ",%d,%u,%u\n";
+
+const char reportCSV_bw_jitter_loss_format[] =
+"%s,%s,%d,%.1f-%.1f,%" PRIdMAX ",%" PRIdMAX ",%.3f,%" PRIdMAX ",%" PRIdMAX ",%.3f,%" PRIdMAX "\n";
+
+const char reportCSV_bw_jitter_loss_pps_format[] =
+"%s,%s,%d,%.1f-%.1f,%" PRIdMAX ",%" PRIdMAX ",%.3f,%" PRIdMAX ",%" PRIdMAX ",%.3f,%" PRIdMAX ",%" PRIdMAX ",%" PRIdMAX ",%f\n";
+
+/* -------------------------------------------------------------------
+ * warnings
+ * ------------------------------------------------------------------- */
+
+const char warn_window_requested[] =
+" (WARNING: requested %s)";
+
+const char warn_window_small[] = "\
+WARNING: TCP window size set to %d bytes. A small window size\n\
+will give poor performance. See the Iperf documentation.\n";
+
+const char warn_delay_large[] =
+"WARNING: delay too large, reducing from %.1f to 1.0 seconds.\n";
+
+const char warn_no_pathmtu[] =
+"WARNING: Path MTU Discovery may not be enabled.\n";
+
+const char warn_no_ack[]=
+"[%3d] WARNING: did not receive ack of last datagram after %d tries.\n";
+
+const char warn_ack_failed[]=
+"[%3d] WARNING: ack of last datagram failed.\n";
+
+const char warn_fileopen_failed[]=
+"WARNING: Unable to open file stream for transfer\n\
+Using default data stream. \n";
+
+const char unable_to_change_win[]=
+"WARNING: Unable to change the window size\n";
+
+const char opt_estimate[]=
+"Optimal Estimate\n";
+
+#ifdef HAVE_FASTSAMPLING
+const char report_interval_small[] =
+"WARNING: interval too small, increasing to %3.4f milliseconds.\n";
+#else
+const char report_interval_small[] =
+"WARNING: interval too small, increasing to %3.3f milliseconds.\n";
+#endif
+const char warn_invalid_server_option[] =
+"WARNING: option -%c is not valid for server mode\n";
+
+const char warn_invalid_client_option[] =
+"WARNING: option -%c is not valid for client mode\n";
+
+const char warn_invalid_compatibility_option[] =
+"WARNING: option -%c is not valid in compatibility mode\n";
+
+const char warn_implied_udp[] =
+"WARNING: option -%c implies udp testing\n";
+
+const char warn_implied_compatibility[] =
+"WARNING: option -%c has implied compatibility mode\n";
+
+const char warn_buffer_too_small[] =
+"WARNING: %s socket buffer size (-l value) increased to %d bytes for proper operation\n";
+
+const char warn_invalid_single_threaded[] =
+"WARNING: option -%c is not valid in single threaded versions\n";
+
+const char warn_invalid_report_style[] =
+"WARNING: unknown reporting style \"%s\", switching to default\n";
+
+const char warn_invalid_report[] =
+"WARNING: unknown reporting type \"%c\", ignored\n valid options are:\n\t exclude: C(connection) D(data) M(multicast) S(settings) V(server) report\n\n";
+
+const char warn_server_old[] =
+"WARNING: iperf server version is likely very old\n";
+
+const char warn_test_exchange_failed[] =
+"WARNING: client/server version exchange failed\n";
+
+const char warn_len_too_small_peer_exchange[] =
+"WARNING: %s option -l value of %d is too small for peer exchange (suggested min value is %d bytes)\n";
+
+const char warn_compat_and_peer_exchange[] =
+"WARNING: Options of '-C' '--compatibility' AND '-X' '--peerdetect' are mutually exclusive, --peerdetect ignored\n";
+
+const char warn_start_before_now[] =
+"[%3d] WARNING: --txstart-time (%" PRIdMAX ".%" PRIdMAX ") %s is before now %s\n";
+
+const char error_starttime_exceeds[] =
+"ERROR: --txstart-time (%" PRIdMAX ".%" PRIdMAX ") %s exceeds max scheduled delay of %d secs\n";
+
+const char error_delaytime_exceeds[] =
+"ERROR: --txdelay-time of %d seconds is more than the supported delay of %d seconds\n";
+
+#ifdef __cplusplus
+} /* end extern "C" */
+#endif