diff options
Diffstat (limited to 'include/uapi/linux')
144 files changed, 31698 insertions, 0 deletions
diff --git a/include/uapi/linux/amt.h b/include/uapi/linux/amt.h new file mode 100644 index 0000000..32aa2a0 --- /dev/null +++ b/include/uapi/linux/amt.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Copyright (c) 2021 Taehee Yoo <ap420073@gmail.com> + */ +#ifndef _AMT_H_ +#define _AMT_H_ + +enum ifla_amt_mode { + /* AMT interface works as Gateway mode. + * The Gateway mode encapsulates IGMP/MLD traffic and decapsulates + * multicast traffic. + */ + AMT_MODE_GATEWAY = 0, + /* AMT interface works as Relay mode. + * The Relay mode encapsulates multicast traffic and decapsulates + * IGMP/MLD traffic. + */ + AMT_MODE_RELAY, + __AMT_MODE_MAX, +}; + +#define AMT_MODE_MAX (__AMT_MODE_MAX - 1) + +enum { + IFLA_AMT_UNSPEC, + /* This attribute specify mode etier Gateway or Relay. */ + IFLA_AMT_MODE, + /* This attribute specify Relay port. + * AMT interface is created as Gateway mode, this attribute is used + * to specify relay(remote) port. + * AMT interface is created as Relay mode, this attribute is used + * as local port. + */ + IFLA_AMT_RELAY_PORT, + /* This attribute specify Gateway port. + * AMT interface is created as Gateway mode, this attribute is used + * as local port. + * AMT interface is created as Relay mode, this attribute is not used. + */ + IFLA_AMT_GATEWAY_PORT, + /* This attribute specify physical device */ + IFLA_AMT_LINK, + /* This attribute specify local ip address */ + IFLA_AMT_LOCAL_IP, + /* This attribute specify Relay ip address. + * So, this is not used by Relay. + */ + IFLA_AMT_REMOTE_IP, + /* This attribute specify Discovery ip address. + * When Gateway get started, it send discovery message to find the + * Relay's ip address. + * So, this is not used by Relay. + */ + IFLA_AMT_DISCOVERY_IP, + /* This attribute specify number of maximum tunnel. */ + IFLA_AMT_MAX_TUNNELS, + __IFLA_AMT_MAX, +}; + +#define IFLA_AMT_MAX (__IFLA_AMT_MAX - 1) + +#endif /* _AMT_H_ */ diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h new file mode 100644 index 0000000..e33ff6b --- /dev/null +++ b/include/uapi/linux/atm.h @@ -0,0 +1,242 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atm.h - general ATM declarations */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +/* + * WARNING: User-space programs should not #include <linux/atm.h> directly. + * Instead, #include <atm.h> + */ + +#ifndef _LINUX_ATM_H +#define _LINUX_ATM_H + +/* + * BEGIN_xx and END_xx markers are used for automatic generation of + * documentation. Do not change them. + */ + + +#include <linux/atmapi.h> +#include <linux/atmsap.h> +#include <linux/atmioc.h> +#include <linux/types.h> + + +/* general ATM constants */ +#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */ +#define ATM_CELL_PAYLOAD 48 /* ATM payload size */ +#define ATM_AAL0_SDU 52 /* AAL0 SDU size */ +#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */ +#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */ +#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */ +#define ATM_MAX_CDV 9999 /* maximum (default) CDV */ +#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */ + +#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */ +#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */ +#define ATM_MAX_VCI 65535 /* maximum VCI */ + + +/* "protcol" values for the socket system call */ +#define ATM_NO_AAL 0 /* AAL not specified */ +#define ATM_AAL0 13 /* "raw" ATM cells */ +#define ATM_AAL1 1 /* AAL1 (CBR) */ +#define ATM_AAL2 2 /* AAL2 (VBR) */ +#define ATM_AAL34 3 /* AAL3/4 (data) */ +#define ATM_AAL5 5 /* AAL5 (data) */ + +/* + * socket option name coding functions + * + * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the + * << 22 only reserves 9 bits for the level. On some architectures + * SOL_SOCKET is 0xFFFF, so that's a bit of a problem + */ + +#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \ + sizeof(t)) +#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF)) +#define __SO_NUMBER(c) (((c) >> 16) & 0x3f) +#define __SO_SIZE(c) ((c) & 0x3fff) + +/* + * ATM layer + */ + +#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int) + /* set CLP bit value - TODO */ +#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange) + /* connection identifier range; socket must be + bound or connected */ +#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos) + /* Quality of Service setting */ +#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap) + /* Service Access Point */ +#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc) + /* "PVC" address (also for SVCs); get only */ +#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int) + /* make this vc a p2mp */ + + +/* + * Note @@@: since the socket layers don't really distinguish the control and + * the data plane but generally seems to be data plane-centric, any layer is + * about equally wrong for the SAP. If you have a better idea about this, + * please speak up ... + */ + + +/* ATM cell header (for AAL0) */ + +/* BEGIN_CH */ +#define ATM_HDR_GFC_MASK 0xf0000000 +#define ATM_HDR_GFC_SHIFT 28 +#define ATM_HDR_VPI_MASK 0x0ff00000 +#define ATM_HDR_VPI_SHIFT 20 +#define ATM_HDR_VCI_MASK 0x000ffff0 +#define ATM_HDR_VCI_SHIFT 4 +#define ATM_HDR_PTI_MASK 0x0000000e +#define ATM_HDR_PTI_SHIFT 1 +#define ATM_HDR_CLP 0x00000001 +/* END_CH */ + + +/* PTI codings */ + +/* BEGIN_PTI */ +#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */ +#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */ +#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */ +#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */ +#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */ +#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */ +#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */ +#define ATM_PTI_RSV 7 /* reserved */ +/* END_PTI */ + + +/* + * The following items should stay in linux/atm.h, which should be linked to + * netatm/atm.h + */ + +/* Traffic description */ + +#define ATM_NONE 0 /* no traffic */ +#define ATM_UBR 1 +#define ATM_CBR 2 +#define ATM_VBR 3 +#define ATM_ABR 4 +#define ATM_ANYCLASS 5 /* compatible with everything */ + +#define ATM_MAX_PCR -1 /* maximum available PCR */ + +struct atm_trafprm { + unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ + int max_pcr; /* maximum PCR in cells per second */ + int pcr; /* desired PCR in cells per second */ + int min_pcr; /* minimum PCR in cells per second */ + int max_cdv; /* maximum CDV in microseconds */ + int max_sdu; /* maximum SDU in bytes */ + /* extra params for ABR */ + unsigned int icr; /* Initial Cell Rate (24-bit) */ + unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ + unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */ + unsigned int rif : 4; /* Rate Increment Factor (4-bit) */ + unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */ + unsigned int nrm_pres :1; /* nrm present bit */ + unsigned int trm_pres :1; /* rm present bit */ + unsigned int adtf_pres :1; /* adtf present bit */ + unsigned int cdf_pres :1; /* cdf present bit*/ + unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */ + unsigned int trm :3; /* Time between forward RM cells (3-bit) */ + unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ + unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ + unsigned int spare :9; /* spare bits */ +}; + +struct atm_qos { + struct atm_trafprm txtp; /* parameters in TX direction */ + struct atm_trafprm rxtp __ATM_API_ALIGN; + /* parameters in RX direction */ + unsigned char aal __ATM_API_ALIGN; +}; + +/* PVC addressing */ + +#define ATM_ITF_ANY -1 /* "magic" PVC address values */ +#define ATM_VPI_ANY -1 +#define ATM_VCI_ANY -1 +#define ATM_VPI_UNSPEC -2 +#define ATM_VCI_UNSPEC -2 + + +struct sockaddr_atmpvc { + unsigned short sap_family; /* address family, AF_ATMPVC */ + struct { /* PVC address */ + short itf; /* ATM interface */ + short vpi; /* VPI (only 8 bits at UNI) */ + int vci; /* VCI (only 16 bits at UNI) */ + } sap_addr __ATM_API_ALIGN; /* PVC address */ +}; + +/* SVC addressing */ + +#define ATM_ESA_LEN 20 /* ATM End System Address length */ +#define ATM_E164_LEN 12 /* maximum E.164 number length */ + +#define ATM_AFI_DCC 0x39 /* DCC ATM Format */ +#define ATM_AFI_ICD 0x47 /* ICD ATM Format */ +#define ATM_AFI_E164 0x45 /* E.164 ATM Format */ +#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */ + +#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */ +#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */ +#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */ +#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */ + +#define ATM_LIJ_NONE 0 /* no leaf-initiated join */ +#define ATM_LIJ 1 /* request joining */ +#define ATM_LIJ_RPJ 2 /* set to root-prompted join */ +#define ATM_LIJ_NJ 3 /* set to network join */ + + +struct sockaddr_atmsvc { + unsigned short sas_family; /* address family, AF_ATMSVC */ + struct { /* SVC address */ + unsigned char prv[ATM_ESA_LEN];/* private ATM address */ + char pub[ATM_E164_LEN+1]; /* public address (E.164) */ + /* unused addresses must be bzero'ed */ + char lij_type; /* role in LIJ call; one of ATM_LIJ* */ + __u32 lij_id; /* LIJ call identifier */ + } sas_addr __ATM_API_ALIGN; /* SVC address */ +}; + + +static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr) +{ + return *addr.sas_addr.prv || *addr.sas_addr.pub; +} + + +static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr) +{ + return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci; +} + + +/* + * Some stuff for linux/sockios.h + */ + +struct atmif_sioc { + int number; + int length; + void *arg; +}; + + +typedef unsigned short atm_backend_t; +#endif /* _LINUX_ATM_H */ diff --git a/include/uapi/linux/atmapi.h b/include/uapi/linux/atmapi.h new file mode 100644 index 0000000..c9bf5c2 --- /dev/null +++ b/include/uapi/linux/atmapi.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atmapi.h - ATM API user space/kernel compatibility */ + +/* Written 1999,2000 by Werner Almesberger, EPFL ICA */ + + +#ifndef _LINUX_ATMAPI_H +#define _LINUX_ATMAPI_H + +#if defined(__sparc__) || defined(__ia64__) +/* such alignment is not required on 32 bit sparcs, but we can't + figure that we are on a sparc64 while compiling user-space programs. */ +#define __ATM_API_ALIGN __attribute__((aligned(8))) +#else +#define __ATM_API_ALIGN +#endif + + +/* + * Opaque type for kernel pointers. Note that _ is never accessed. We need + * the struct in order hide the array, so that we can make simple assignments + * instead of being forced to use memcpy. It also improves error reporting for + * code that still assumes that we're passing unsigned longs. + * + * Convention: NULL pointers are passed as a field of all zeroes. + */ + +typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; + +#endif diff --git a/include/uapi/linux/atmarp.h b/include/uapi/linux/atmarp.h new file mode 100644 index 0000000..8e44d12 --- /dev/null +++ b/include/uapi/linux/atmarp.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */ + +/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef _LINUX_ATMARP_H +#define _LINUX_ATMARP_H + +#include <linux/types.h> +#include <linux/atmapi.h> +#include <linux/atmioc.h> + + +#define ATMARP_RETRY_DELAY 30 /* request next resolution or forget + NAK after 30 sec - should go into + atmclip.h */ +#define ATMARP_MAX_UNRES_PACKETS 5 /* queue that many packets while + waiting for the resolver */ + + +#define ATMARPD_CTRL _IO('a',ATMIOC_CLIP+1) /* become atmarpd ctrl sock */ +#define ATMARP_MKIP _IO('a',ATMIOC_CLIP+2) /* attach socket to IP */ +#define ATMARP_SETENTRY _IO('a',ATMIOC_CLIP+3) /* fill or hide ARP entry */ +#define ATMARP_ENCAP _IO('a',ATMIOC_CLIP+5) /* change encapsulation */ + + +enum atmarp_ctrl_type { + act_invalid, /* catch uninitialized structures */ + act_need, /* need address resolution */ + act_up, /* interface is coming up */ + act_down, /* interface is going down */ + act_change /* interface configuration has changed */ +}; + +struct atmarp_ctrl { + enum atmarp_ctrl_type type; /* message type */ + int itf_num;/* interface number (if present) */ + __be32 ip; /* IP address (act_need only) */ +}; + +#endif diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h new file mode 100644 index 0000000..c95786e --- /dev/null +++ b/include/uapi/linux/atmdev.h @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atmdev.h - ATM device driver declarations and various related items */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef LINUX_ATMDEV_H +#define LINUX_ATMDEV_H + + +#include <linux/atmapi.h> +#include <linux/atm.h> +#include <linux/atmioc.h> + + +#define ESI_LEN 6 + +#define ATM_OC3_PCR (155520000/270*260/8/53) + /* OC3 link rate: 155520000 bps + SONET overhead: /270*260 (9 section, 1 path) + bits per cell: /8/53 + max cell rate: 353207.547 cells/sec */ +#define ATM_25_PCR ((25600000/8-8000)/54) + /* 25 Mbps ATM cell rate (59111) */ +#define ATM_OC12_PCR (622080000/1080*1040/8/53) + /* OC12 link rate: 622080000 bps + SONET overhead: /1080*1040 + bits per cell: /8/53 + max cell rate: 1412830.188 cells/sec */ +#define ATM_DS3_PCR (8000*12) + /* DS3: 12 cells in a 125 usec time slot */ + + +#define __AAL_STAT_ITEMS \ + __HANDLE_ITEM(tx); /* TX okay */ \ + __HANDLE_ITEM(tx_err); /* TX errors */ \ + __HANDLE_ITEM(rx); /* RX okay */ \ + __HANDLE_ITEM(rx_err); /* RX errors */ \ + __HANDLE_ITEM(rx_drop); /* RX out of memory */ + +struct atm_aal_stats { +#define __HANDLE_ITEM(i) int i + __AAL_STAT_ITEMS +#undef __HANDLE_ITEM +}; + + +struct atm_dev_stats { + struct atm_aal_stats aal0; + struct atm_aal_stats aal34; + struct atm_aal_stats aal5; +} __ATM_API_ALIGN; + + +#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) + /* get link rate */ +#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) + /* get interface names (numbers) */ +#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) + /* get interface type name */ +#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) + /* get interface ESI */ +#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) + /* get itf's local ATM addr. list */ +#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) + /* reset itf's ATM address list */ +#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) + /* add a local ATM address */ +#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) + /* remove a local ATM address */ +#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) + /* get connection identifier range */ +#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) + /* set connection identifier range */ +#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) + /* set interface ESI */ +#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) + /* force interface ESI */ +#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) + /* register a LECS address */ +#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) + /* unregister a LECS address */ +#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) + /* retrieve LECS address(es) */ + +#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) + /* get AAL layer statistics */ +#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) + /* get AAL layer statistics and zero */ +#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) + /* get loopback mode */ +#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) + /* set loopback mode */ +#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) + /* query supported loopback modes */ +#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) + /* enable or disable single-copy */ +#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) + /* set backend handler */ +#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) + /* use backend to make new if */ +#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) + /* add party to p2mp call */ +#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) + /* drop party from p2mp call */ + +/* + * These are backend handkers that can be set via the ATM_SETBACKEND call + * above. In the future we may support dynamic loading of these - for now, + * they're just being used to share the ATMIOC_BACKEND ioctls + */ +#define ATM_BACKEND_RAW 0 +#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ +#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ + +/* for ATM_GETTYPE */ +#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ + +/* + * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP + */ + +/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ +#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ +#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ +#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ +/* RESERVED 4 loop back on PHY side ---' */ +#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ +#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ + +/* Direction of loopback */ +#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ +#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ + +#define __ATM_LM_XTLOC(n) ((n) & 0xff) +#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) + +#define ATM_LM_NONE 0 /* no loopback */ + +#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) +#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) +#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) +#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) + +#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) +#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) +#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) +#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) + +/* + * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that + * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) + */ + + +struct atm_iobuf { + int length; + void *buffer; +}; + +/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ + +#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ + +struct atm_cirange { + signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ + signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ +}; + +/* for ATM_SETSC; actually taken from the ATM_VF number space */ + +#define ATM_SC_RX 1024 /* enable RX single-copy */ +#define ATM_SC_TX 2048 /* enable TX single-copy */ + +#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out + anyway */ + +/* MF: change_qos (Modify) flags */ + +#define ATM_MF_IMMED 1 /* Block until change is effective */ +#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ +#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ +#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ +#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ +#define ATM_MF_BWD 32 /* Set the backward direction parameters */ + +#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ + ATM_MF_DEC_SHP | ATM_MF_BWD) + +/* + * ATM_VS_* are used to express VC state in a human-friendly way. + */ + +#define ATM_VS_IDLE 0 /* VC is not used */ +#define ATM_VS_CONNECTED 1 /* VC is connected */ +#define ATM_VS_CLOSING 2 /* VC is closing */ +#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ +#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ +#define ATM_VS_BOUND 5 /* VC is bound */ + +#define ATM_VS2TXT_MAP \ + "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" + +#define ATM_VF2TXT_MAP \ + "ADDR", "READY", "PARTIAL", "REGIS", \ + "RELEASED", "HASQOS", "LISTEN", "META", \ + "256", "512", "1024", "2048", \ + "SESSION", "HASSAP", "BOUND", "CLOSE" + + + +#endif /* LINUX_ATMDEV_H */ diff --git a/include/uapi/linux/atmioc.h b/include/uapi/linux/atmioc.h new file mode 100644 index 0000000..a9030bc --- /dev/null +++ b/include/uapi/linux/atmioc.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atmioc.h - ranges for ATM-related ioctl numbers */ + +/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ + + +/* + * See https://icawww1.epfl.ch/linux-atm/magic.html for the complete list of + * "magic" ioctl numbers. + */ + + +#ifndef _LINUX_ATMIOC_H +#define _LINUX_ATMIOC_H + +#include <asm/ioctl.h> + /* everybody including atmioc.h will also need _IO{,R,W,WR} */ + +#define ATMIOC_PHYCOM 0x00 /* PHY device common ioctls, globally unique */ +#define ATMIOC_PHYCOM_END 0x0f +#define ATMIOC_PHYTYP 0x10 /* PHY dev type ioctls, unique per PHY type */ +#define ATMIOC_PHYTYP_END 0x2f +#define ATMIOC_PHYPRV 0x30 /* PHY dev private ioctls, unique per driver */ +#define ATMIOC_PHYPRV_END 0x4f +#define ATMIOC_SARCOM 0x50 /* SAR device common ioctls, globally unique */ +#define ATMIOC_SARCOM_END 0x50 +#define ATMIOC_SARPRV 0x60 /* SAR dev private ioctls, unique per driver */ +#define ATMIOC_SARPRV_END 0x7f +#define ATMIOC_ITF 0x80 /* Interface ioctls, globally unique */ +#define ATMIOC_ITF_END 0x8f +#define ATMIOC_BACKEND 0x90 /* ATM generic backend ioctls, u. per backend */ +#define ATMIOC_BACKEND_END 0xaf +/* 0xb0-0xbf: Reserved for future use */ +#define ATMIOC_AREQUIPA 0xc0 /* Application requested IP over ATM, glob. u. */ +#define ATMIOC_LANE 0xd0 /* LAN Emulation, globally unique */ +#define ATMIOC_MPOA 0xd8 /* MPOA, globally unique */ +#define ATMIOC_CLIP 0xe0 /* Classical IP over ATM control, globally u. */ +#define ATMIOC_CLIP_END 0xef +#define ATMIOC_SPECIAL 0xf0 /* Special-purpose controls, globally unique */ +#define ATMIOC_SPECIAL_END 0xff + +#endif diff --git a/include/uapi/linux/atmsap.h b/include/uapi/linux/atmsap.h new file mode 100644 index 0000000..fc05248 --- /dev/null +++ b/include/uapi/linux/atmsap.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* atmsap.h - ATM Service Access Point addressing definitions */ + +/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef _LINUX_ATMSAP_H +#define _LINUX_ATMSAP_H + +#include <linux/atmapi.h> + +/* + * BEGIN_xx and END_xx markers are used for automatic generation of + * documentation. Do not change them. + */ + + +/* + * Layer 2 protocol identifiers + */ + +/* BEGIN_L2 */ +#define ATM_L2_NONE 0 /* L2 not specified */ +#define ATM_L2_ISO1745 0x01 /* Basic mode ISO 1745 */ +#define ATM_L2_Q291 0x02 /* ITU-T Q.291 (Rec. I.441) */ +#define ATM_L2_X25_LL 0x06 /* ITU-T X.25, link layer */ +#define ATM_L2_X25_ML 0x07 /* ITU-T X.25, multilink */ +#define ATM_L2_LAPB 0x08 /* Extended LAPB, half-duplex (Rec. T.71) */ +#define ATM_L2_HDLC_ARM 0x09 /* HDLC ARM (ISO/IEC 4335) */ +#define ATM_L2_HDLC_NRM 0x0a /* HDLC NRM (ISO/IEC 4335) */ +#define ATM_L2_HDLC_ABM 0x0b /* HDLC ABM (ISO/IEC 4335) */ +#define ATM_L2_ISO8802 0x0c /* LAN LLC (ISO/IEC 8802/2) */ +#define ATM_L2_X75 0x0d /* ITU-T X.75, SLP */ +#define ATM_L2_Q922 0x0e /* ITU-T Q.922 */ +#define ATM_L2_USER 0x10 /* user-specified */ +#define ATM_L2_ISO7776 0x11 /* ISO 7776 DTE-DTE */ +/* END_L2 */ + + +/* + * Layer 3 protocol identifiers + */ + +/* BEGIN_L3 */ +#define ATM_L3_NONE 0 /* L3 not specified */ +#define ATM_L3_X25 0x06 /* ITU-T X.25, packet layer */ +#define ATM_L3_ISO8208 0x07 /* ISO/IEC 8208 */ +#define ATM_L3_X223 0x08 /* ITU-T X.223 | ISO/IEC 8878 */ +#define ATM_L3_ISO8473 0x09 /* ITU-T X.233 | ISO/IEC 8473 */ +#define ATM_L3_T70 0x0a /* ITU-T T.70 minimum network layer */ +#define ATM_L3_TR9577 0x0b /* ISO/IEC TR 9577 */ +#define ATM_L3_H310 0x0c /* ITU-T Recommendation H.310 */ +#define ATM_L3_H321 0x0d /* ITU-T Recommendation H.321 */ +#define ATM_L3_USER 0x10 /* user-specified */ +/* END_L3 */ + + +/* + * High layer identifiers + */ + +/* BEGIN_HL */ +#define ATM_HL_NONE 0 /* HL not specified */ +#define ATM_HL_ISO 0x01 /* ISO */ +#define ATM_HL_USER 0x02 /* user-specific */ +#define ATM_HL_HLP 0x03 /* high layer profile - UNI 3.0 only */ +#define ATM_HL_VENDOR 0x04 /* vendor-specific application identifier */ +/* END_HL */ + + +/* + * ITU-T coded mode of operation + */ + +/* BEGIN_IMD */ +#define ATM_IMD_NONE 0 /* mode not specified */ +#define ATM_IMD_NORMAL 1 /* normal mode of operation */ +#define ATM_IMD_EXTENDED 2 /* extended mode of operation */ +/* END_IMD */ + +/* + * H.310 code points + */ + +#define ATM_TT_NONE 0 /* terminal type not specified */ +#define ATM_TT_RX 1 /* receive only */ +#define ATM_TT_TX 2 /* send only */ +#define ATM_TT_RXTX 3 /* receive and send */ + +#define ATM_MC_NONE 0 /* no multiplexing */ +#define ATM_MC_TS 1 /* transport stream (TS) */ +#define ATM_MC_TS_FEC 2 /* transport stream with forward error corr. */ +#define ATM_MC_PS 3 /* program stream (PS) */ +#define ATM_MC_PS_FEC 4 /* program stream with forward error corr. */ +#define ATM_MC_H221 5 /* ITU-T Rec. H.221 */ + +/* + * SAP structures + */ + +#define ATM_MAX_HLI 8 /* maximum high-layer information length */ + + +struct atm_blli { + unsigned char l2_proto; /* layer 2 protocol */ + union { + struct { + unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ + /* absent */ + unsigned char window; /* window size (k), 1-127 (0 to omit) */ + } itu; /* ITU-T encoding */ + unsigned char user; /* user-specified l2 information */ + } l2; + unsigned char l3_proto; /* layer 3 protocol */ + union { + struct { + unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ + /* absent */ + unsigned char def_size; /* default packet size (log2), 4-12 (0 to */ + /* omit) */ + unsigned char window;/* packet window size, 1-127 (0 to omit) */ + } itu; /* ITU-T encoding */ + unsigned char user; /* user specified l3 information */ + struct { /* if l3_proto = ATM_L3_H310 */ + unsigned char term_type; /* terminal type */ + unsigned char fw_mpx_cap; /* forward multiplexing capability */ + /* only if term_type != ATM_TT_NONE */ + unsigned char bw_mpx_cap; /* backward multiplexing capability */ + /* only if term_type != ATM_TT_NONE */ + } h310; + struct { /* if l3_proto = ATM_L3_TR9577 */ + unsigned char ipi; /* initial protocol id */ + unsigned char snap[5];/* IEEE 802.1 SNAP identifier */ + /* (only if ipi == NLPID_IEEE802_1_SNAP) */ + } tr9577; + } l3; +} __ATM_API_ALIGN; + + +struct atm_bhli { + unsigned char hl_type; /* high layer information type */ + unsigned char hl_length; /* length (only if hl_type == ATM_HL_USER || */ + /* hl_type == ATM_HL_ISO) */ + unsigned char hl_info[ATM_MAX_HLI];/* high layer information */ +}; + + +#define ATM_MAX_BLLI 3 /* maximum number of BLLI elements */ + + +struct atm_sap { + struct atm_bhli bhli; /* local SAP, high-layer information */ + struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN; + /* local SAP, low-layer info */ +}; + + +static __inline__ int blli_in_use(struct atm_blli blli) +{ + return blli.l2_proto || blli.l3_proto; +} + +#endif diff --git a/include/uapi/linux/ax25.h b/include/uapi/linux/ax25.h new file mode 100644 index 0000000..b496b9d --- /dev/null +++ b/include/uapi/linux/ax25.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * These are the public elements of the Linux kernel AX.25 code. A similar + * file netrom.h exists for the NET/ROM protocol. + */ + +#ifndef AX25_KERNEL_H +#define AX25_KERNEL_H + +#include <linux/socket.h> + +#define AX25_MTU 256 +#define AX25_MAX_DIGIS 8 + +#define AX25_WINDOW 1 +#define AX25_T1 2 +#define AX25_N2 3 +#define AX25_T3 4 +#define AX25_T2 5 +#define AX25_BACKOFF 6 +#define AX25_EXTSEQ 7 +#define AX25_PIDINCL 8 +#define AX25_IDLE 9 +#define AX25_PACLEN 10 +#define AX25_IAMDIGI 12 + +#define AX25_KILL 99 + +#define SIOCAX25GETUID (SIOCPROTOPRIVATE+0) +#define SIOCAX25ADDUID (SIOCPROTOPRIVATE+1) +#define SIOCAX25DELUID (SIOCPROTOPRIVATE+2) +#define SIOCAX25NOUID (SIOCPROTOPRIVATE+3) +#define SIOCAX25OPTRT (SIOCPROTOPRIVATE+7) +#define SIOCAX25CTLCON (SIOCPROTOPRIVATE+8) +#define SIOCAX25GETINFOOLD (SIOCPROTOPRIVATE+9) +#define SIOCAX25ADDFWD (SIOCPROTOPRIVATE+10) +#define SIOCAX25DELFWD (SIOCPROTOPRIVATE+11) +#define SIOCAX25DEVCTL (SIOCPROTOPRIVATE+12) +#define SIOCAX25GETINFO (SIOCPROTOPRIVATE+13) + +#define AX25_SET_RT_IPMODE 2 + +#define AX25_NOUID_DEFAULT 0 +#define AX25_NOUID_BLOCK 1 + +typedef struct { + char ax25_call[7]; /* 6 call + SSID (shifted ascii!) */ +} ax25_address; + +struct sockaddr_ax25 { + __kernel_sa_family_t sax25_family; + ax25_address sax25_call; + int sax25_ndigis; + /* Digipeater ax25_address sets follow */ +}; + +#define sax25_uid sax25_ndigis + +struct full_sockaddr_ax25 { + struct sockaddr_ax25 fsa_ax25; + ax25_address fsa_digipeater[AX25_MAX_DIGIS]; +}; + +struct ax25_routes_struct { + ax25_address port_addr; + ax25_address dest_addr; + unsigned char digi_count; + ax25_address digi_addr[AX25_MAX_DIGIS]; +}; + +struct ax25_route_opt_struct { + ax25_address port_addr; + ax25_address dest_addr; + int cmd; + int arg; +}; + +struct ax25_ctl_struct { + ax25_address port_addr; + ax25_address source_addr; + ax25_address dest_addr; + unsigned int cmd; + unsigned long arg; + unsigned char digi_count; + ax25_address digi_addr[AX25_MAX_DIGIS]; +}; + +/* this will go away. Please do not export to user land */ +struct ax25_info_struct_deprecated { + unsigned int n2, n2count; + unsigned int t1, t1timer; + unsigned int t2, t2timer; + unsigned int t3, t3timer; + unsigned int idle, idletimer; + unsigned int state; + unsigned int rcv_q, snd_q; +}; + +struct ax25_info_struct { + unsigned int n2, n2count; + unsigned int t1, t1timer; + unsigned int t2, t2timer; + unsigned int t3, t3timer; + unsigned int idle, idletimer; + unsigned int state; + unsigned int rcv_q, snd_q; + unsigned int vs, vr, va, vs_max; + unsigned int paclen; + unsigned int window; +}; + +struct ax25_fwd_struct { + ax25_address port_from; + ax25_address port_to; +}; + +#endif diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h new file mode 100644 index 0000000..ebe2177 --- /dev/null +++ b/include/uapi/linux/batman_adv.h @@ -0,0 +1,704 @@ +/* SPDX-License-Identifier: MIT */ +/* Copyright (C) B.A.T.M.A.N. contributors: + * + * Matthias Schiffer + */ + +#ifndef _LINUX_BATMAN_ADV_H_ +#define _LINUX_BATMAN_ADV_H_ + +#define BATADV_NL_NAME "batadv" + +#define BATADV_NL_MCAST_GROUP_CONFIG "config" +#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" + +/** + * enum batadv_tt_client_flags - TT client specific flags + * + * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. + * Bits from 8 to 15 are called _local flags_ because they are used for local + * computations only. + * + * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with + * the other nodes in the network. To achieve this goal these flags are included + * in the TT CRC computation. + */ +enum batadv_tt_client_flags { + /** + * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table + */ + BATADV_TT_CLIENT_DEL = (1 << 0), + + /** + * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and + * the new update telling its new real location has not been + * received/sent yet + */ + BATADV_TT_CLIENT_ROAM = (1 << 1), + + /** + * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi + * interface. This information is used by the "AP Isolation" feature + */ + BATADV_TT_CLIENT_WIFI = (1 << 4), + + /** + * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This + * information is used by the Extended Isolation feature + */ + BATADV_TT_CLIENT_ISOLA = (1 << 5), + + /** + * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from + * the table + */ + BATADV_TT_CLIENT_NOPURGE = (1 << 8), + + /** + * @BATADV_TT_CLIENT_NEW: this client has been added to the local table + * but has not been announced yet + */ + BATADV_TT_CLIENT_NEW = (1 << 9), + + /** + * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it + * is kept in the table for one more originator interval for consistency + * purposes + */ + BATADV_TT_CLIENT_PENDING = (1 << 10), + + /** + * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be + * part of the network but no node has already announced it + */ + BATADV_TT_CLIENT_TEMP = (1 << 11), +}; + +/** + * enum batadv_mcast_flags_priv - Private, own multicast flags + * + * These are internal, multicast related flags. Currently they describe certain + * multicast related attributes of the segment this originator bridges into the + * mesh. + * + * Those attributes are used to determine the public multicast flags this + * originator is going to announce via TT. + * + * For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier + * related flags are undefined. + */ +enum batadv_mcast_flags_priv { + /** + * @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh + * interface. + */ + BATADV_MCAST_FLAGS_BRIDGED = (1 << 0), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4), +}; + +/** + * enum batadv_gw_modes - gateway mode of node + */ +enum batadv_gw_modes { + /** @BATADV_GW_MODE_OFF: gw mode disabled */ + BATADV_GW_MODE_OFF, + + /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ + BATADV_GW_MODE_CLIENT, + + /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */ + BATADV_GW_MODE_SERVER, +}; + +/** + * enum batadv_nl_attrs - batman-adv netlink attributes + */ +enum batadv_nl_attrs { + /** + * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors + */ + BATADV_ATTR_UNSPEC, + + /** + * @BATADV_ATTR_VERSION: batman-adv version string + */ + BATADV_ATTR_VERSION, + + /** + * @BATADV_ATTR_ALGO_NAME: name of routing algorithm + */ + BATADV_ATTR_ALGO_NAME, + + /** + * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface + */ + BATADV_ATTR_MESH_IFINDEX, + + /** + * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface + */ + BATADV_ATTR_MESH_IFNAME, + + /** + * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface + */ + BATADV_ATTR_MESH_ADDRESS, + + /** + * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface + */ + BATADV_ATTR_HARD_IFINDEX, + + /** + * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface + */ + BATADV_ATTR_HARD_IFNAME, + + /** + * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv + * interface + */ + BATADV_ATTR_HARD_ADDRESS, + + /** + * @BATADV_ATTR_ORIG_ADDRESS: originator mac address + */ + BATADV_ATTR_ORIG_ADDRESS, + + /** + * @BATADV_ATTR_TPMETER_RESULT: result of run (see + * batadv_tp_meter_status) + */ + BATADV_ATTR_TPMETER_RESULT, + + /** + * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took + */ + BATADV_ATTR_TPMETER_TEST_TIME, + + /** + * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run + */ + BATADV_ATTR_TPMETER_BYTES, + + /** + * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session + */ + BATADV_ATTR_TPMETER_COOKIE, + + /** + * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment + */ + BATADV_ATTR_PAD, + + /** + * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active + */ + BATADV_ATTR_ACTIVE, + + /** + * @BATADV_ATTR_TT_ADDRESS: Client MAC address + */ + BATADV_ATTR_TT_ADDRESS, + + /** + * @BATADV_ATTR_TT_TTVN: Translation table version + */ + BATADV_ATTR_TT_TTVN, + + /** + * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version + */ + BATADV_ATTR_TT_LAST_TTVN, + + /** + * @BATADV_ATTR_TT_CRC32: CRC32 over translation table + */ + BATADV_ATTR_TT_CRC32, + + /** + * @BATADV_ATTR_TT_VID: VLAN ID + */ + BATADV_ATTR_TT_VID, + + /** + * @BATADV_ATTR_TT_FLAGS: Translation table client flags + */ + BATADV_ATTR_TT_FLAGS, + + /** + * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best + */ + BATADV_ATTR_FLAG_BEST, + + /** + * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen + */ + BATADV_ATTR_LAST_SEEN_MSECS, + + /** + * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address + */ + BATADV_ATTR_NEIGH_ADDRESS, + + /** + * @BATADV_ATTR_TQ: TQ to neighbour + */ + BATADV_ATTR_TQ, + + /** + * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour + */ + BATADV_ATTR_THROUGHPUT, + + /** + * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth + */ + BATADV_ATTR_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth + */ + BATADV_ATTR_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_ROUTER: Gateway router MAC address + */ + BATADV_ATTR_ROUTER, + + /** + * @BATADV_ATTR_BLA_OWN: Flag indicating own originator + */ + BATADV_ATTR_BLA_OWN, + + /** + * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address + */ + BATADV_ATTR_BLA_ADDRESS, + + /** + * @BATADV_ATTR_BLA_VID: BLA VLAN ID + */ + BATADV_ATTR_BLA_VID, + + /** + * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address + */ + BATADV_ATTR_BLA_BACKBONE, + + /** + * @BATADV_ATTR_BLA_CRC: BLA CRC + */ + BATADV_ATTR_BLA_CRC, + + /** + * @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address + */ + BATADV_ATTR_DAT_CACHE_IP4ADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address + */ + BATADV_ATTR_DAT_CACHE_HWADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_VID: VLAN ID + */ + BATADV_ATTR_DAT_CACHE_VID, + + /** + * @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags + */ + BATADV_ATTR_MCAST_FLAGS, + + /** + * @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags + */ + BATADV_ATTR_MCAST_FLAGS_PRIV, + + /** + * @BATADV_ATTR_VLANID: VLAN id on top of soft interface + */ + BATADV_ATTR_VLANID, + + /** + * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol + * messages of the mesh interface shall be aggregated or not. + */ + BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + + /** + * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going + * from a wireless client to another wireless client will be silently + * dropped. + */ + BATADV_ATTR_AP_ISOLATION_ENABLED, + + /** + * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MARK, + + /** + * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MASK, + + /** + * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through + * the mesh will be sent using multiple interfaces at the same time. + */ + BATADV_ATTR_BONDING_ENABLED, + + /** + * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop + * avoidance feature is enabled. This feature detects and avoids loops + * between the mesh and devices bridged with the soft interface + */ + BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + + /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + + /** + * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going + * through the mesh will be fragmented or silently discarded if the + * packet size exceeds the outgoing interface MTU. + */ + BATADV_ATTR_FRAGMENTATION_ENABLED, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_GW_MODE: defines the state of the gateway features. + * Possible values are specified in enum batadv_gw_modes + */ + BATADV_ATTR_GW_MODE, + + /** + * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node + * will use to choose a gateway if gw_mode was set to 'client'. + */ + BATADV_ATTR_GW_SEL_CLASS, + + /** + * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied + * to an originator message's tq-field on every hop and/or per + * hard interface + */ + BATADV_ATTR_HOP_PENALTY, + + /** + * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages + * should be send to the debug log/trace ring buffer + */ + BATADV_ATTR_LOG_LEVEL, + + /** + * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast + * optimizations should be replaced by simple broadcast-like flooding + * of multicast packets. If set to non-zero then all nodes in the mesh + * are going to use classic flooding for any multicast packet with no + * optimizations. + */ + BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, + + /** + * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using + * some magic to send fewer wifi packets but still the same content) is + * enabled or not. + */ + BATADV_ATTR_NETWORK_CODING_ENABLED, + + /** + * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in + * which batman sends its protocol messages. + */ + BATADV_ATTR_ORIG_INTERVAL, + + /** + * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in + * which batman emits probing packets for neighbor sensing (ELP). + */ + BATADV_ATTR_ELP_INTERVAL, + + /** + * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be + * used by B.A.T.M.A.N. V when estimating the link throughput using + * this interface. If the value is set to 0 then batman-adv will try to + * estimate the throughput by itself. + */ + BATADV_ATTR_THROUGHPUT_OVERRIDE, + + /** + * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet + * copies that may be generated for a multicast-to-unicast conversion. + * Once this limit is exceeded distribution will fall back to broadcast. + */ + BATADV_ATTR_MULTICAST_FANOUT, + + /* add attributes above here, update the policy in netlink.c */ + + /** + * @__BATADV_ATTR_AFTER_LAST: internal use + */ + __BATADV_ATTR_AFTER_LAST, + + /** + * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available + */ + NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, + + /** + * @BATADV_ATTR_MAX: highest attribute number currently defined + */ + BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 +}; + +/** + * enum batadv_nl_commands - supported batman-adv netlink commands + */ +enum batadv_nl_commands { + /** + * @BATADV_CMD_UNSPEC: unspecified command to catch errors + */ + BATADV_CMD_UNSPEC, + + /** + * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh + */ + BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH + */ + BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_TP_METER: Start a tp meter session + */ + BATADV_CMD_TP_METER, + + /** + * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session + */ + BATADV_CMD_TP_METER_CANCEL, + + /** + * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. + */ + BATADV_CMD_GET_ROUTING_ALGOS, + + /** + * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the + * current softif + */ + BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF + */ + BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations + */ + BATADV_CMD_GET_TRANSTABLE_LOCAL, + + /** + * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations + */ + BATADV_CMD_GET_TRANSTABLE_GLOBAL, + + /** + * @BATADV_CMD_GET_ORIGINATORS: Query list of originators + */ + BATADV_CMD_GET_ORIGINATORS, + + /** + * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours + */ + BATADV_CMD_GET_NEIGHBORS, + + /** + * @BATADV_CMD_GET_GATEWAYS: Query list of gateways + */ + BATADV_CMD_GET_GATEWAYS, + + /** + * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims + */ + BATADV_CMD_GET_BLA_CLAIM, + + /** + * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance + * backbones + */ + BATADV_CMD_GET_BLA_BACKBONE, + + /** + * @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries + */ + BATADV_CMD_GET_DAT_CACHE, + + /** + * @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags + */ + BATADV_CMD_GET_MCAST_FLAGS, + + /** + * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh + */ + BATADV_CMD_SET_MESH, + + /** + * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the + * current softif + */ + BATADV_CMD_SET_HARDIF, + + /** + * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the + * current softif + */ + BATADV_CMD_GET_VLAN, + + /** + * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the + * current softif + */ + BATADV_CMD_SET_VLAN, + + /* add new commands above here */ + + /** + * @__BATADV_CMD_AFTER_LAST: internal use + */ + __BATADV_CMD_AFTER_LAST, + + /** + * @BATADV_CMD_MAX: highest used command number + */ + BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 +}; + +/** + * enum batadv_tp_meter_reason - reason of a tp meter test run stop + */ +enum batadv_tp_meter_reason { + /** + * @BATADV_TP_REASON_COMPLETE: sender finished tp run + */ + BATADV_TP_REASON_COMPLETE = 3, + + /** + * @BATADV_TP_REASON_CANCEL: sender was stopped during run + */ + BATADV_TP_REASON_CANCEL = 4, + + /* error status >= 128 */ + + /** + * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or + * didn't answer + */ + BATADV_TP_REASON_DST_UNREACHABLE = 128, + + /** + * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit + */ + BATADV_TP_REASON_RESEND_LIMIT = 129, + + /** + * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node + * already ongoing + */ + BATADV_TP_REASON_ALREADY_ONGOING = 130, + + /** + * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory + */ + BATADV_TP_REASON_MEMORY_ERROR = 131, + + /** + * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface + */ + BATADV_TP_REASON_CANT_SEND = 132, + + /** + * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions + */ + BATADV_TP_REASON_TOO_MANY = 133, +}; + +/** + * enum batadv_ifla_attrs - batman-adv ifla nested attributes + */ +enum batadv_ifla_attrs { + /** + * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by + * rtnetlink + */ + IFLA_BATADV_UNSPEC, + + /** + * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be + * used by the newly registered batadv net_device. + */ + IFLA_BATADV_ALGO_NAME, + + /* add attributes above here, update the policy in soft-interface.c */ + + /** + * @__IFLA_BATADV_MAX: internal use + */ + __IFLA_BATADV_MAX, +}; + +#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1) + +#endif /* _LINUX_BATMAN_ADV_H_ */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h new file mode 100644 index 0000000..0a2380a --- /dev/null +++ b/include/uapi/linux/bpf.h @@ -0,0 +1,7368 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#ifndef __LINUX_BPF_H__ +#define __LINUX_BPF_H__ + +#include <linux/types.h> +#include <linux/bpf_common.h> + +/* Extended instruction set based on top of classic BPF */ + +/* instruction classes */ +#define BPF_JMP32 0x06 /* jmp mode in word width */ +#define BPF_ALU64 0x07 /* alu mode in double word width */ + +/* ld/ldx fields */ +#define BPF_DW 0x18 /* double word (64-bit) */ +#define BPF_MEMSX 0x80 /* load with sign extension */ +#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ +#define BPF_XADD 0xc0 /* exclusive add - legacy name */ + +/* alu/jmp fields */ +#define BPF_MOV 0xb0 /* mov reg to reg */ +#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ + +/* change endianness of a register */ +#define BPF_END 0xd0 /* flags for endianness conversion: */ +#define BPF_TO_LE 0x00 /* convert to little-endian */ +#define BPF_TO_BE 0x08 /* convert to big-endian */ +#define BPF_FROM_LE BPF_TO_LE +#define BPF_FROM_BE BPF_TO_BE + +/* jmp encodings */ +#define BPF_JNE 0x50 /* jump != */ +#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ +#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ +#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ +#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ +#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ +#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ +#define BPF_CALL 0x80 /* function call */ +#define BPF_EXIT 0x90 /* function return */ + +/* atomic op type fields (stored in immediate) */ +#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ +#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ +#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ + +/* Register numbers */ +enum { + BPF_REG_0 = 0, + BPF_REG_1, + BPF_REG_2, + BPF_REG_3, + BPF_REG_4, + BPF_REG_5, + BPF_REG_6, + BPF_REG_7, + BPF_REG_8, + BPF_REG_9, + BPF_REG_10, + __MAX_BPF_REG, +}; + +/* BPF has 10 general purpose 64-bit registers and stack frame. */ +#define MAX_BPF_REG __MAX_BPF_REG + +struct bpf_insn { + __u8 code; /* opcode */ + __u8 dst_reg:4; /* dest register */ + __u8 src_reg:4; /* source register */ + __s16 off; /* signed offset */ + __s32 imm; /* signed immediate constant */ +}; + +/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ +struct bpf_lpm_trie_key { + __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ + __u8 data[0]; /* Arbitrary size */ +}; + +struct bpf_cgroup_storage_key { + __u64 cgroup_inode_id; /* cgroup inode id */ + __u32 attach_type; /* program attach type (enum bpf_attach_type) */ +}; + +enum bpf_cgroup_iter_order { + BPF_CGROUP_ITER_ORDER_UNSPEC = 0, + BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ + BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ + BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ + BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ +}; + +union bpf_iter_link_info { + struct { + __u32 map_fd; + } map; + struct { + enum bpf_cgroup_iter_order order; + + /* At most one of cgroup_fd and cgroup_id can be non-zero. If + * both are zero, the walk starts from the default cgroup v2 + * root. For walking v1 hierarchy, one should always explicitly + * specify cgroup_fd. + */ + __u32 cgroup_fd; + __u64 cgroup_id; + } cgroup; + /* Parameters of task iterators. */ + struct { + __u32 tid; + __u32 pid; + __u32 pid_fd; + } task; +}; + +/* BPF syscall commands, see bpf(2) man-page for more details. */ +/** + * DOC: eBPF Syscall Preamble + * + * The operation to be performed by the **bpf**\ () system call is determined + * by the *cmd* argument. Each operation takes an accompanying argument, + * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see + * below). The size argument is the size of the union pointed to by *attr*. + */ +/** + * DOC: eBPF Syscall Commands + * + * BPF_MAP_CREATE + * Description + * Create a map and return a file descriptor that refers to the + * map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) + * is automatically enabled for the new file descriptor. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_MAP_CREATE** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_LOOKUP_ELEM + * Description + * Look up an element with a given *key* in the map referred to + * by the file descriptor *map_fd*. + * + * The *flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_ELEM + * Description + * Create or update an element (key/value pair) in a specified map. + * + * The *flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create a new element or update an existing element. + * **BPF_NOEXIST** + * Create a new element only if it did not exist. + * **BPF_EXIST** + * Update an existing element. + * **BPF_F_LOCK** + * Update a spin_lock-ed map element. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, + * **E2BIG**, **EEXIST**, or **ENOENT**. + * + * **E2BIG** + * The number of elements in the map reached the + * *max_entries* limit specified at map creation time. + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_ELEM + * Description + * Look up and delete an element by key in a specified map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_GET_NEXT_KEY + * Description + * Look up an element by key in a specified map and return the key + * of the next element. Can be used to iterate over all elements + * in the map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * The following cases can be used to iterate over all elements of + * the map: + * + * * If *key* is not found, the operation returns zero and sets + * the *next_key* pointer to the key of the first element. + * * If *key* is found, the operation returns zero and sets the + * *next_key* pointer to the key of the next element. + * * If *key* is the last element, returns -1 and *errno* is set + * to **ENOENT**. + * + * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or + * **EINVAL** on error. + * + * BPF_PROG_LOAD + * Description + * Verify and load an eBPF program, returning a new file + * descriptor associated with the program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). + * + * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is + * automatically enabled for the new file descriptor. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_PIN + * Description + * Pin an eBPF program or map referred by the specified *bpf_fd* + * to the provided *pathname* on the filesystem. + * + * The *pathname* argument must not contain a dot ("."). + * + * On success, *pathname* retains a reference to the eBPF object, + * preventing deallocation of the object when the original + * *bpf_fd* is closed. This allow the eBPF object to live beyond + * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent + * process. + * + * Applying **unlink**\ (2) or similar calls to the *pathname* + * unpins the object from the filesystem, removing the reference. + * If no other file descriptors or filesystem nodes refer to the + * same object, it will be deallocated (see NOTES). + * + * The filesystem type for the parent directory of *pathname* must + * be **BPF_FS_MAGIC**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_OBJ_GET + * Description + * Open a file descriptor for the eBPF object pinned to the + * specified *pathname*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_PROG_ATTACH + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook. + * + * The *attach_type* specifies the eBPF attachment point to + * attach the program to, and must be one of *bpf_attach_type* + * (see below). + * + * The *attach_bpf_fd* must be a valid file descriptor for a + * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap + * or sock_ops type corresponding to the specified *attach_type*. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_TYPE_SK_SKB**, + * **BPF_PROG_TYPE_SK_MSG** + * + * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_DETACH + * Description + * Detach the eBPF program associated with the *target_fd* at the + * hook specified by *attach_type*. The program must have been + * previously attached using **BPF_PROG_ATTACH**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_TEST_RUN + * Description + * Run the eBPF program associated with the *prog_fd* a *repeat* + * number of times against a provided program context *ctx_in* and + * data *data_in*, and return the modified program context + * *ctx_out*, *data_out* (for example, packet data), result of the + * execution *retval*, and *duration* of the test run. + * + * The sizes of the buffers provided as input and output + * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must + * be provided in the corresponding variables *ctx_size_in*, + * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any + * of these parameters are not provided (ie set to NULL), the + * corresponding size field must be zero. + * + * Some program types have particular requirements: + * + * **BPF_PROG_TYPE_SK_LOOKUP** + * *data_in* and *data_out* must be NULL. + * + * **BPF_PROG_TYPE_RAW_TRACEPOINT**, + * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** + * + * *ctx_out*, *data_in* and *data_out* must be NULL. + * *repeat* must be zero. + * + * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * **ENOSPC** + * Either *data_size_out* or *ctx_size_out* is too small. + * **ENOTSUPP** + * This command is not supported by the program type of + * the program referred to by *prog_fd*. + * + * BPF_PROG_GET_NEXT_ID + * Description + * Fetch the next eBPF program currently loaded into the kernel. + * + * Looks for the eBPF program with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF programs + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_GET_NEXT_ID + * Description + * Fetch the next eBPF map currently loaded into the kernel. + * + * Looks for the eBPF map with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF maps + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_PROG_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF program corresponding to + * *prog_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF map corresponding to + * *map_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_GET_INFO_BY_FD + * Description + * Obtain information about the eBPF object corresponding to + * *bpf_fd*. + * + * Populates up to *info_len* bytes of *info*, which will be in + * one of the following formats depending on the eBPF object type + * of *bpf_fd*: + * + * * **struct bpf_prog_info** + * * **struct bpf_map_info** + * * **struct bpf_btf_info** + * * **struct bpf_link_info** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_QUERY + * Description + * Obtain information about eBPF programs associated with the + * specified *attach_type* hook. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_QUERY** always fetches the number of programs + * attached and the *attach_flags* which were used to attach those + * programs. Additionally, if *prog_ids* is nonzero and the number + * of attached programs is less than *prog_cnt*, populates + * *prog_ids* with the eBPF program ids of the programs attached + * at *target_fd*. + * + * The following flags may alter the result: + * + * **BPF_F_QUERY_EFFECTIVE** + * Only return information regarding programs which are + * currently effective at the specified *target_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_RAW_TRACEPOINT_OPEN + * Description + * Attach an eBPF program to a tracepoint *name* to access kernel + * internal arguments of the tracepoint in their raw form. + * + * The *prog_fd* must be a valid file descriptor associated with + * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. + * + * No ABI guarantees are made about the content of tracepoint + * arguments exposed to the corresponding eBPF program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_LOAD + * Description + * Verify and load BPF Type Format (BTF) metadata into the kernel, + * returning a new file descriptor associated with the metadata. + * BTF is described in more detail at + * https://www.kernel.org/doc/html/latest/bpf/btf.html. + * + * The *btf* parameter must point to valid memory providing + * *btf_size* bytes of BTF binary metadata. + * + * The returned file descriptor can be passed to other **bpf**\ () + * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to + * associate the BTF with those objects. + * + * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional + * parameters to specify a *btf_log_buf*, *btf_log_size* and + * *btf_log_level* which allow the kernel to return freeform log + * output regarding the BTF verification process. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_GET_FD_BY_ID + * Description + * Open a file descriptor for the BPF Type Format (BTF) + * corresponding to *btf_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_TASK_FD_QUERY + * Description + * Obtain information about eBPF programs associated with the + * target process identified by *pid* and *fd*. + * + * If the *pid* and *fd* are associated with a tracepoint, kprobe + * or uprobe perf event, then the *prog_id* and *fd_type* will + * be populated with the eBPF program id and file descriptor type + * of type **bpf_task_fd_type**. If associated with a kprobe or + * uprobe, the *probe_offset* and *probe_addr* will also be + * populated. Optionally, if *buf* is provided, then up to + * *buf_len* bytes of *buf* will be populated with the name of + * the tracepoint, kprobe or uprobe. + * + * The resulting *prog_id* may be introspected in deeper detail + * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_LOOKUP_AND_DELETE_ELEM + * Description + * Look up an element with the given *key* in the map referred to + * by the file descriptor *fd*, and if found, delete the element. + * + * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map + * types, the *flags* argument needs to be set to 0, but for other + * map types, it may be specified as: + * + * **BPF_F_LOCK** + * Look up and delete the value of a spin-locked map + * without returning the lock. This must be specified if + * the elements contain a spinlock. + * + * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types + * implement this command as a "pop" operation, deleting the top + * element rather than one corresponding to *key*. + * The *key* and *key_len* parameters should be zeroed when + * issuing this operation for these map types. + * + * This command is only valid for the following map types: + * * **BPF_MAP_TYPE_QUEUE** + * * **BPF_MAP_TYPE_STACK** + * * **BPF_MAP_TYPE_HASH** + * * **BPF_MAP_TYPE_PERCPU_HASH** + * * **BPF_MAP_TYPE_LRU_HASH** + * * **BPF_MAP_TYPE_LRU_PERCPU_HASH** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_FREEZE + * Description + * Freeze the permissions of the specified map. + * + * Write permissions may be frozen by passing zero *flags*. + * Upon success, no future syscall invocations may alter the + * map state of *map_fd*. Write operations from eBPF programs + * are still possible for a frozen map. + * + * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_BTF_GET_NEXT_ID + * Description + * Fetch the next BPF Type Format (BTF) object currently loaded + * into the kernel. + * + * Looks for the BTF object with an id greater than *start_id* + * and updates *next_id* on success. If no other BTF objects + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_LOOKUP_BATCH + * Description + * Iterate and fetch multiple elements in a map. + * + * Two opaque values are used to manage batch operations, + * *in_batch* and *out_batch*. Initially, *in_batch* must be set + * to NULL to begin the batched operation. After each subsequent + * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant + * *out_batch* as the *in_batch* for the next operation to + * continue iteration from the current point. + * + * The *keys* and *values* are output parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are copied into the + * user buffer, with the keys copied into *keys* and the values + * copied into the corresponding indices in *values*. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **ENOSPC** to indicate that *keys* or + * *values* is too small to dump an entire bucket during + * iteration of a hash-based map type. + * + * BPF_MAP_LOOKUP_AND_DELETE_BATCH + * Description + * Iterate and delete all elements in a map. + * + * This operation has the same behavior as + * **BPF_MAP_LOOKUP_BATCH** with two exceptions: + * + * * Every element that is successfully returned is also deleted + * from the map. This is at least *count* elements. Note that + * *count* is both an input and an output parameter. + * * Upon returning with *errno* set to **EFAULT**, up to + * *count* elements may be deleted without returning the keys + * and values of the deleted elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_BATCH + * Description + * Update multiple elements in a map by *key*. + * + * The *keys* and *values* are input parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * Each element specified in *keys* is sequentially updated to the + * value in the corresponding index in *values*. The *in_batch* + * and *out_batch* parameters are ignored and should be zeroed. + * + * The *elem_flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create new elements or update a existing elements. + * **BPF_NOEXIST** + * Create new elements only if they do not exist. + * **BPF_EXIST** + * Update existing elements. + * **BPF_F_LOCK** + * Update spin_lock-ed map elements. This must be + * specified if the map value contains a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or + * **E2BIG**. **E2BIG** indicates that the number of elements in + * the map reached the *max_entries* limit specified at map + * creation time. + * + * May set *errno* to one of the following error codes under + * specific circumstances: + * + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_BATCH + * Description + * Delete multiple elements in a map by *key*. + * + * The *keys* parameter is an input parameter which must point + * to memory large enough to hold *count* items based on the key + * size of the map *map_fd*, that is, *key_size* * *count*. + * + * Each element specified in *keys* is sequentially deleted. The + * *in_batch*, *out_batch*, and *values* parameters are ignored + * and should be zeroed. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. If + * *errno* is **EFAULT**, up to *count* elements may be been + * deleted. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_CREATE + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook and return a file descriptor handle for + * managing the link. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_UPDATE + * Description + * Update the eBPF program in the specified *link_fd* to + * *new_prog_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF Link corresponding to + * *link_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_GET_NEXT_ID + * Description + * Fetch the next eBPF link currently loaded into the kernel. + * + * Looks for the eBPF link with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF links + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_ENABLE_STATS + * Description + * Enable eBPF runtime statistics gathering. + * + * Runtime statistics gathering for the eBPF runtime is disabled + * by default to minimize the corresponding performance overhead. + * This command enables statistics globally. + * + * Multiple programs may independently enable statistics. + * After gathering the desired statistics, eBPF runtime statistics + * may be disabled again by calling **close**\ (2) for the file + * descriptor returned by this function. Statistics will only be + * disabled system-wide when all outstanding file descriptors + * returned by prior calls for this subcommand are closed. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_ITER_CREATE + * Description + * Create an iterator on top of the specified *link_fd* (as + * previously created using **BPF_LINK_CREATE**) and return a + * file descriptor that can be used to trigger the iteration. + * + * If the resulting file descriptor is pinned to the filesystem + * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls + * for that path will trigger the iterator to read kernel state + * using the eBPF program attached to *link_fd*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_DETACH + * Description + * Forcefully detach the specified *link_fd* from its + * corresponding attachment point. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_BIND_MAP + * Description + * Bind a map to the lifetime of an eBPF program. + * + * The map identified by *map_fd* is bound to the program + * identified by *prog_fd* and only released when *prog_fd* is + * released. This may be used in cases where metadata should be + * associated with a program which otherwise does not contain any + * references to the map (for example, embedded in the eBPF + * program instructions). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * NOTES + * eBPF objects (maps and programs) can be shared between processes. + * + * * After **fork**\ (2), the child inherits file descriptors + * referring to the same eBPF objects. + * * File descriptors referring to eBPF objects can be transferred over + * **unix**\ (7) domain sockets. + * * File descriptors referring to eBPF objects can be duplicated in the + * usual way, using **dup**\ (2) and similar calls. + * * File descriptors referring to eBPF objects can be pinned to the + * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). + * + * An eBPF object is deallocated only after all file descriptors referring + * to the object have been closed and no references remain pinned to the + * filesystem or attached (for example, bound to a program or device). + */ +enum bpf_cmd { + BPF_MAP_CREATE, + BPF_MAP_LOOKUP_ELEM, + BPF_MAP_UPDATE_ELEM, + BPF_MAP_DELETE_ELEM, + BPF_MAP_GET_NEXT_KEY, + BPF_PROG_LOAD, + BPF_OBJ_PIN, + BPF_OBJ_GET, + BPF_PROG_ATTACH, + BPF_PROG_DETACH, + BPF_PROG_TEST_RUN, + BPF_PROG_RUN = BPF_PROG_TEST_RUN, + BPF_PROG_GET_NEXT_ID, + BPF_MAP_GET_NEXT_ID, + BPF_PROG_GET_FD_BY_ID, + BPF_MAP_GET_FD_BY_ID, + BPF_OBJ_GET_INFO_BY_FD, + BPF_PROG_QUERY, + BPF_RAW_TRACEPOINT_OPEN, + BPF_BTF_LOAD, + BPF_BTF_GET_FD_BY_ID, + BPF_TASK_FD_QUERY, + BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, + BPF_BTF_GET_NEXT_ID, + BPF_MAP_LOOKUP_BATCH, + BPF_MAP_LOOKUP_AND_DELETE_BATCH, + BPF_MAP_UPDATE_BATCH, + BPF_MAP_DELETE_BATCH, + BPF_LINK_CREATE, + BPF_LINK_UPDATE, + BPF_LINK_GET_FD_BY_ID, + BPF_LINK_GET_NEXT_ID, + BPF_ENABLE_STATS, + BPF_ITER_CREATE, + BPF_LINK_DETACH, + BPF_PROG_BIND_MAP, +}; + +enum bpf_map_type { + BPF_MAP_TYPE_UNSPEC, + BPF_MAP_TYPE_HASH, + BPF_MAP_TYPE_ARRAY, + BPF_MAP_TYPE_PROG_ARRAY, + BPF_MAP_TYPE_PERF_EVENT_ARRAY, + BPF_MAP_TYPE_PERCPU_HASH, + BPF_MAP_TYPE_PERCPU_ARRAY, + BPF_MAP_TYPE_STACK_TRACE, + BPF_MAP_TYPE_CGROUP_ARRAY, + BPF_MAP_TYPE_LRU_HASH, + BPF_MAP_TYPE_LRU_PERCPU_HASH, + BPF_MAP_TYPE_LPM_TRIE, + BPF_MAP_TYPE_ARRAY_OF_MAPS, + BPF_MAP_TYPE_HASH_OF_MAPS, + BPF_MAP_TYPE_DEVMAP, + BPF_MAP_TYPE_SOCKMAP, + BPF_MAP_TYPE_CPUMAP, + BPF_MAP_TYPE_XSKMAP, + BPF_MAP_TYPE_SOCKHASH, + BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching + * to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to + * both cgroup-attached and other progs and supports all functionality + * provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark + * BPF_MAP_TYPE_CGROUP_STORAGE deprecated. + */ + BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, + BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE is available to bpf programs + * attaching to a cgroup. The new mechanism (BPF_MAP_TYPE_CGRP_STORAGE + + * local percpu kptr) supports all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * functionality and more. So mark * BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * deprecated. + */ + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE = BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, + BPF_MAP_TYPE_QUEUE, + BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, + BPF_MAP_TYPE_DEVMAP_HASH, + BPF_MAP_TYPE_STRUCT_OPS, + BPF_MAP_TYPE_RINGBUF, + BPF_MAP_TYPE_INODE_STORAGE, + BPF_MAP_TYPE_TASK_STORAGE, + BPF_MAP_TYPE_BLOOM_FILTER, + BPF_MAP_TYPE_USER_RINGBUF, + BPF_MAP_TYPE_CGRP_STORAGE, +}; + +/* Note that tracing related programs such as + * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} + * are not subject to a stable API since kernel internal data + * structures can change from release to release and may + * therefore break existing tracing BPF programs. Tracing BPF + * programs correspond to /a/ specific kernel which is to be + * analyzed, and not /a/ specific kernel /and/ all future ones. + */ +enum bpf_prog_type { + BPF_PROG_TYPE_UNSPEC, + BPF_PROG_TYPE_SOCKET_FILTER, + BPF_PROG_TYPE_KPROBE, + BPF_PROG_TYPE_SCHED_CLS, + BPF_PROG_TYPE_SCHED_ACT, + BPF_PROG_TYPE_TRACEPOINT, + BPF_PROG_TYPE_XDP, + BPF_PROG_TYPE_PERF_EVENT, + BPF_PROG_TYPE_CGROUP_SKB, + BPF_PROG_TYPE_CGROUP_SOCK, + BPF_PROG_TYPE_LWT_IN, + BPF_PROG_TYPE_LWT_OUT, + BPF_PROG_TYPE_LWT_XMIT, + BPF_PROG_TYPE_SOCK_OPS, + BPF_PROG_TYPE_SK_SKB, + BPF_PROG_TYPE_CGROUP_DEVICE, + BPF_PROG_TYPE_SK_MSG, + BPF_PROG_TYPE_RAW_TRACEPOINT, + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, + BPF_PROG_TYPE_LWT_SEG6LOCAL, + BPF_PROG_TYPE_LIRC_MODE2, + BPF_PROG_TYPE_SK_REUSEPORT, + BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + BPF_PROG_TYPE_CGROUP_SOCKOPT, + BPF_PROG_TYPE_TRACING, + BPF_PROG_TYPE_STRUCT_OPS, + BPF_PROG_TYPE_EXT, + BPF_PROG_TYPE_LSM, + BPF_PROG_TYPE_SK_LOOKUP, + BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ + BPF_PROG_TYPE_NETFILTER, +}; + +enum bpf_attach_type { + BPF_CGROUP_INET_INGRESS, + BPF_CGROUP_INET_EGRESS, + BPF_CGROUP_INET_SOCK_CREATE, + BPF_CGROUP_SOCK_OPS, + BPF_SK_SKB_STREAM_PARSER, + BPF_SK_SKB_STREAM_VERDICT, + BPF_CGROUP_DEVICE, + BPF_SK_MSG_VERDICT, + BPF_CGROUP_INET4_BIND, + BPF_CGROUP_INET6_BIND, + BPF_CGROUP_INET4_CONNECT, + BPF_CGROUP_INET6_CONNECT, + BPF_CGROUP_INET4_POST_BIND, + BPF_CGROUP_INET6_POST_BIND, + BPF_CGROUP_UDP4_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + BPF_LIRC_MODE2, + BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, + BPF_CGROUP_UDP4_RECVMSG, + BPF_CGROUP_UDP6_RECVMSG, + BPF_CGROUP_GETSOCKOPT, + BPF_CGROUP_SETSOCKOPT, + BPF_TRACE_RAW_TP, + BPF_TRACE_FENTRY, + BPF_TRACE_FEXIT, + BPF_MODIFY_RETURN, + BPF_LSM_MAC, + BPF_TRACE_ITER, + BPF_CGROUP_INET4_GETPEERNAME, + BPF_CGROUP_INET6_GETPEERNAME, + BPF_CGROUP_INET4_GETSOCKNAME, + BPF_CGROUP_INET6_GETSOCKNAME, + BPF_XDP_DEVMAP, + BPF_CGROUP_INET_SOCK_RELEASE, + BPF_XDP_CPUMAP, + BPF_SK_LOOKUP, + BPF_XDP, + BPF_SK_SKB_VERDICT, + BPF_SK_REUSEPORT_SELECT, + BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, + BPF_PERF_EVENT, + BPF_TRACE_KPROBE_MULTI, + BPF_LSM_CGROUP, + BPF_STRUCT_OPS, + BPF_NETFILTER, + BPF_TCX_INGRESS, + BPF_TCX_EGRESS, + BPF_TRACE_UPROBE_MULTI, + BPF_CGROUP_UNIX_CONNECT, + BPF_CGROUP_UNIX_SENDMSG, + BPF_CGROUP_UNIX_RECVMSG, + BPF_CGROUP_UNIX_GETPEERNAME, + BPF_CGROUP_UNIX_GETSOCKNAME, + BPF_NETKIT_PRIMARY, + BPF_NETKIT_PEER, + __MAX_BPF_ATTACH_TYPE +}; + +#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE + +enum bpf_link_type { + BPF_LINK_TYPE_UNSPEC = 0, + BPF_LINK_TYPE_RAW_TRACEPOINT = 1, + BPF_LINK_TYPE_TRACING = 2, + BPF_LINK_TYPE_CGROUP = 3, + BPF_LINK_TYPE_ITER = 4, + BPF_LINK_TYPE_NETNS = 5, + BPF_LINK_TYPE_XDP = 6, + BPF_LINK_TYPE_PERF_EVENT = 7, + BPF_LINK_TYPE_KPROBE_MULTI = 8, + BPF_LINK_TYPE_STRUCT_OPS = 9, + BPF_LINK_TYPE_NETFILTER = 10, + BPF_LINK_TYPE_TCX = 11, + BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_NETKIT = 13, + __MAX_BPF_LINK_TYPE, +}; + +#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE + +enum bpf_perf_event_type { + BPF_PERF_EVENT_UNSPEC = 0, + BPF_PERF_EVENT_UPROBE = 1, + BPF_PERF_EVENT_URETPROBE = 2, + BPF_PERF_EVENT_KPROBE = 3, + BPF_PERF_EVENT_KRETPROBE = 4, + BPF_PERF_EVENT_TRACEPOINT = 5, + BPF_PERF_EVENT_EVENT = 6, +}; + +/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command + * + * NONE(default): No further bpf programs allowed in the subtree. + * + * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, + * the program in this cgroup yields to sub-cgroup program. + * + * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, + * that cgroup program gets run in addition to the program in this cgroup. + * + * Only one program is allowed to be attached to a cgroup with + * NONE or BPF_F_ALLOW_OVERRIDE flag. + * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will + * release old program and attach the new one. Attach flags has to match. + * + * Multiple programs are allowed to be attached to a cgroup with + * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order + * (those that were attached first, run first) + * The programs of sub-cgroup are executed first, then programs of + * this cgroup and then programs of parent cgroup. + * When children program makes decision (like picking TCP CA or sock bind) + * parent program has a chance to override it. + * + * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of + * programs for a cgroup. Though it's possible to replace an old program at + * any position by also specifying BPF_F_REPLACE flag and position itself in + * replace_bpf_fd attribute. Old program at this position will be released. + * + * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. + * A cgroup with NONE doesn't allow any programs in sub-cgroups. + * Ex1: + * cgrp1 (MULTI progs A, B) -> + * cgrp2 (OVERRIDE prog C) -> + * cgrp3 (MULTI prog D) -> + * cgrp4 (OVERRIDE prog E) -> + * cgrp5 (NONE prog F) + * the event in cgrp5 triggers execution of F,D,A,B in that order. + * if prog F is detached, the execution is E,D,A,B + * if prog F and D are detached, the execution is E,A,B + * if prog F, E and D are detached, the execution is C,A,B + * + * All eligible programs are executed regardless of return code from + * earlier programs. + */ +#define BPF_F_ALLOW_OVERRIDE (1U << 0) +#define BPF_F_ALLOW_MULTI (1U << 1) +/* Generic attachment flags. */ +#define BPF_F_REPLACE (1U << 2) +#define BPF_F_BEFORE (1U << 3) +#define BPF_F_AFTER (1U << 4) +#define BPF_F_ID (1U << 5) +#define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ + +/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the + * verifier will perform strict alignment checking as if the kernel + * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, + * and NET_IP_ALIGN defined to 2. + */ +#define BPF_F_STRICT_ALIGNMENT (1U << 0) + +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the + * verifier will allow any alignment whatsoever. On platforms + * with strict alignment requirements for loads ands stores (such + * as sparc and mips) the verifier validates that all loads and + * stores provably follow this requirement. This flag turns that + * checking and enforcement off. + * + * It is mostly used for testing when we want to validate the + * context and memory access aspects of the verifier, but because + * of an unaligned access the alignment check would trigger before + * the one we are interested in. + */ +#define BPF_F_ANY_ALIGNMENT (1U << 1) + +/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. + * Verifier does sub-register def/use analysis and identifies instructions whose + * def only matters for low 32-bit, high 32-bit is never referenced later + * through implicit zero extension. Therefore verifier notifies JIT back-ends + * that it is safe to ignore clearing high 32-bit for these instructions. This + * saves some back-ends a lot of code-gen. However such optimization is not + * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends + * hence hasn't used verifier's analysis result. But, we really want to have a + * way to be able to verify the correctness of the described optimization on + * x86_64 on which testsuites are frequently exercised. + * + * So, this flag is introduced. Once it is set, verifier will randomize high + * 32-bit for those instructions who has been identified as safe to ignore them. + * Then, if verifier is not doing correct analysis, such randomization will + * regress tests to expose bugs. + */ +#define BPF_F_TEST_RND_HI32 (1U << 2) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_STATE_FREQ (1U << 3) + +/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will + * restrict map and helper usage for such programs. Sleepable BPF programs can + * only be attached to hooks where kernel execution context allows sleeping. + * Such programs are allowed to use helpers that may sleep like + * bpf_copy_from_user(). + */ +#define BPF_F_SLEEPABLE (1U << 4) + +/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program + * fully support xdp frags. + */ +#define BPF_F_XDP_HAS_FRAGS (1U << 5) + +/* If BPF_F_XDP_DEV_BOUND_ONLY is used in BPF_PROG_LOAD command, the loaded + * program becomes device-bound but can access XDP metadata. + */ +#define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_REG_INVARIANTS (1U << 7) + +/* link_create.kprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_KPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_KPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.uprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_UPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_UPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.netfilter.flags used in LINK_CREATE command for + * BPF_PROG_TYPE_NETFILTER to enable IP packet defragmentation. + */ +#define BPF_F_NETFILTER_IP_DEFRAG (1U << 0) + +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * the following extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX] + * insn[0].imm: map fd or fd_idx + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map + * verifier type: CONST_PTR_TO_MAP + */ +#define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_IDX 5 + +/* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE + * insn[0].imm: map fd or fd_idx + * insn[1].imm: offset into value + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map[0]+offset + * verifier type: PTR_TO_MAP_VALUE + */ +#define BPF_PSEUDO_MAP_VALUE 2 +#define BPF_PSEUDO_MAP_IDX_VALUE 6 + +/* insn[0].src_reg: BPF_PSEUDO_BTF_ID + * insn[0].imm: kernel btd id of VAR + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the kernel variable + * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var + * is struct/union. + */ +#define BPF_PSEUDO_BTF_ID 3 +/* insn[0].src_reg: BPF_PSEUDO_FUNC + * insn[0].imm: insn offset to the func + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the function + * verifier type: PTR_TO_FUNC. + */ +#define BPF_PSEUDO_FUNC 4 + +/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative + * offset to another bpf function + */ +#define BPF_PSEUDO_CALL 1 +/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, + * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel + */ +#define BPF_PSEUDO_KFUNC_CALL 2 + +/* flags for BPF_MAP_UPDATE_ELEM command */ +enum { + BPF_ANY = 0, /* create new element or update existing */ + BPF_NOEXIST = 1, /* create new element if it didn't exist */ + BPF_EXIST = 2, /* update existing element */ + BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */ +}; + +/* flags for BPF_MAP_CREATE command */ +enum { + BPF_F_NO_PREALLOC = (1U << 0), +/* Instead of having one common LRU list in the + * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list + * which can scale and perform better. + * Note, the LRU nodes (including free nodes) cannot be moved + * across different LRU lists. + */ + BPF_F_NO_COMMON_LRU = (1U << 1), +/* Specify numa node during map creation */ + BPF_F_NUMA_NODE = (1U << 2), + +/* Flags for accessing BPF object from syscall side. */ + BPF_F_RDONLY = (1U << 3), + BPF_F_WRONLY = (1U << 4), + +/* Flag for stack_map, store build_id+offset instead of pointer */ + BPF_F_STACK_BUILD_ID = (1U << 5), + +/* Zero-initialize hash function seed. This should only be used for testing. */ + BPF_F_ZERO_SEED = (1U << 6), + +/* Flags for accessing BPF object from program side. */ + BPF_F_RDONLY_PROG = (1U << 7), + BPF_F_WRONLY_PROG = (1U << 8), + +/* Clone map from listener for newly accepted socket */ + BPF_F_CLONE = (1U << 9), + +/* Enable memory-mapping BPF map */ + BPF_F_MMAPABLE = (1U << 10), + +/* Share perf_event among processes */ + BPF_F_PRESERVE_ELEMS = (1U << 11), + +/* Create a map that is suitable to be an inner map with dynamic max entries */ + BPF_F_INNER_MAP = (1U << 12), + +/* Create a map that will be registered/unregesitered by the backed bpf_link */ + BPF_F_LINK = (1U << 13), + +/* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ + BPF_F_PATH_FD = (1U << 14), +}; + +/* Flags for BPF_PROG_QUERY. */ + +/* Query effective (directly attached + inherited from ancestor cgroups) + * programs that will be executed for events within a cgroup. + * attach_flags with this flag are always returned 0. + */ +#define BPF_F_QUERY_EFFECTIVE (1U << 0) + +/* Flags for BPF_PROG_TEST_RUN */ + +/* If set, run the test on the cpu specified by bpf_attr.test.cpu */ +#define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) + +/* type for BPF_ENABLE_STATS */ +enum bpf_stats_type { + /* enabled run_time_ns and run_cnt */ + BPF_STATS_RUN_TIME = 0, +}; + +enum bpf_stack_build_id_status { + /* user space need an empty entry to identify end of a trace */ + BPF_STACK_BUILD_ID_EMPTY = 0, + /* with valid build_id and offset */ + BPF_STACK_BUILD_ID_VALID = 1, + /* couldn't get build_id, fallback to ip */ + BPF_STACK_BUILD_ID_IP = 2, +}; + +#define BPF_BUILD_ID_SIZE 20 +struct bpf_stack_build_id { + __s32 status; + unsigned char build_id[BPF_BUILD_ID_SIZE]; + union { + __u64 offset; + __u64 ip; + }; +}; + +#define BPF_OBJ_NAME_LEN 16U + +union bpf_attr { + struct { /* anonymous struct used by BPF_MAP_CREATE command */ + __u32 map_type; /* one of enum bpf_map_type */ + __u32 key_size; /* size of key in bytes */ + __u32 value_size; /* size of value in bytes */ + __u32 max_entries; /* max number of entries in a map */ + __u32 map_flags; /* BPF_MAP_CREATE related + * flags defined above. + */ + __u32 inner_map_fd; /* fd pointing to the inner map */ + __u32 numa_node; /* numa node (effective only if + * BPF_F_NUMA_NODE is set). + */ + char map_name[BPF_OBJ_NAME_LEN]; + __u32 map_ifindex; /* ifindex of netdev to create on */ + __u32 btf_fd; /* fd pointing to a BTF type data */ + __u32 btf_key_type_id; /* BTF type_id of the key */ + __u32 btf_value_type_id; /* BTF type_id of the value */ + __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel- + * struct stored as the + * map value + */ + /* Any per-map-type extra fields + * + * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the + * number of hash functions (if 0, the bloom filter will default + * to using 5 hash functions). + */ + __u64 map_extra; + }; + + struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ + __u32 map_fd; + __aligned_u64 key; + union { + __aligned_u64 value; + __aligned_u64 next_key; + }; + __u64 flags; + }; + + struct { /* struct used by BPF_MAP_*_BATCH commands */ + __aligned_u64 in_batch; /* start batch, + * NULL to start from beginning + */ + __aligned_u64 out_batch; /* output: next start batch */ + __aligned_u64 keys; + __aligned_u64 values; + __u32 count; /* input/output: + * input: # of key/value + * elements + * output: # of filled elements + */ + __u32 map_fd; + __u64 elem_flags; + __u64 flags; + } batch; + + struct { /* anonymous struct used by BPF_PROG_LOAD command */ + __u32 prog_type; /* one of enum bpf_prog_type */ + __u32 insn_cnt; + __aligned_u64 insns; + __aligned_u64 license; + __u32 log_level; /* verbosity level of verifier */ + __u32 log_size; /* size of user buffer */ + __aligned_u64 log_buf; /* user supplied buffer */ + __u32 kern_version; /* not used */ + __u32 prog_flags; + char prog_name[BPF_OBJ_NAME_LEN]; + __u32 prog_ifindex; /* ifindex of netdev to prep for */ + /* For some prog types expected attach type must be known at + * load time to verify attach type specific parts of prog + * (context accesses, allowed helpers, etc). + */ + __u32 expected_attach_type; + __u32 prog_btf_fd; /* fd pointing to BTF type data */ + __u32 func_info_rec_size; /* userspace bpf_func_info size */ + __aligned_u64 func_info; /* func info */ + __u32 func_info_cnt; /* number of bpf_func_info records */ + __u32 line_info_rec_size; /* userspace bpf_line_info size */ + __aligned_u64 line_info; /* line info */ + __u32 line_info_cnt; /* number of bpf_line_info records */ + __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ + union { + /* valid prog_fd to attach to bpf prog */ + __u32 attach_prog_fd; + /* or valid module BTF object fd or 0 to attach to vmlinux */ + __u32 attach_btf_obj_fd; + }; + __u32 core_relo_cnt; /* number of bpf_core_relo */ + __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 log_true_size; + }; + + struct { /* anonymous struct used by BPF_OBJ_* commands */ + __aligned_u64 pathname; + __u32 bpf_fd; + __u32 file_flags; + /* Same as dirfd in openat() syscall; see openat(2) + * manpage for details of path FD and pathname semantics; + * path_fd should accompanied by BPF_F_PATH_FD flag set in + * file_flags field, otherwise it should be set to zero; + * if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed. + */ + __s32 path_fd; + }; + + struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_bpf_fd; + __u32 attach_type; + __u32 attach_flags; + __u32 replace_bpf_fd; + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + }; + + struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ + __u32 prog_fd; + __u32 retval; + __u32 data_size_in; /* input: len of data_in */ + __u32 data_size_out; /* input/output: len of data_out + * returns ENOSPC if data_out + * is too small. + */ + __aligned_u64 data_in; + __aligned_u64 data_out; + __u32 repeat; + __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; + __u32 flags; + __u32 cpu; + __u32 batch_size; + } test; + + struct { /* anonymous struct used by BPF_*_GET_*_ID */ + union { + __u32 start_id; + __u32 prog_id; + __u32 map_id; + __u32 btf_id; + __u32 link_id; + }; + __u32 next_id; + __u32 open_flags; + }; + + struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ + __u32 bpf_fd; + __u32 info_len; + __aligned_u64 info; + } info; + + struct { /* anonymous struct used by BPF_PROG_QUERY command */ + union { + __u32 target_fd; /* target object to query or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_type; + __u32 query_flags; + __u32 attach_flags; + __aligned_u64 prog_ids; + union { + __u32 prog_cnt; + __u32 count; + }; + __u32 :32; + /* output: per-program attach_flags. + * not allowed to be set during effective query. + */ + __aligned_u64 prog_attach_flags; + __aligned_u64 link_ids; + __aligned_u64 link_attach_flags; + __u64 revision; + } query; + + struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ + __u64 name; + __u32 prog_fd; + } raw_tracepoint; + + struct { /* anonymous struct for BPF_BTF_LOAD */ + __aligned_u64 btf; + __aligned_u64 btf_log_buf; + __u32 btf_size; + __u32 btf_log_size; + __u32 btf_log_level; + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 btf_log_true_size; + }; + + struct { + __u32 pid; /* input: pid */ + __u32 fd; /* input: fd */ + __u32 flags; /* input: flags */ + __u32 buf_len; /* input/output: buf len */ + __aligned_u64 buf; /* input/output: + * tp_name for tracepoint + * symbol for kprobe + * filename for uprobe + */ + __u32 prog_id; /* output: prod_id */ + __u32 fd_type; /* output: BPF_FD_TYPE_* */ + __u64 probe_offset; /* output: probe_offset */ + __u64 probe_addr; /* output: probe_addr */ + } task_fd_query; + + struct { /* struct used by BPF_LINK_CREATE command */ + union { + __u32 prog_fd; /* eBPF program to attach */ + __u32 map_fd; /* struct_ops to attach */ + }; + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_type; /* attach type */ + __u32 flags; /* extra flags */ + union { + __u32 target_btf_id; /* btf_id of target to attach to */ + struct { + __aligned_u64 iter_info; /* extra bpf_iter_link_info */ + __u32 iter_info_len; /* iter_info length */ + }; + struct { + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 bpf_cookie; + } perf_event; + struct { + __u32 flags; + __u32 cnt; + __aligned_u64 syms; + __aligned_u64 addrs; + __aligned_u64 cookies; + } kprobe_multi; + struct { + /* this is overlaid with the target_btf_id above. */ + __u32 target_btf_id; + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 cookie; + } tracing; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } tcx; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 cnt; + __u32 flags; + __u32 pid; + } uprobe_multi; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } netkit; + }; + } link_create; + + struct { /* struct used by BPF_LINK_UPDATE command */ + __u32 link_fd; /* link fd */ + union { + /* new program fd to update link with */ + __u32 new_prog_fd; + /* new struct_ops map fd to update link with */ + __u32 new_map_fd; + }; + __u32 flags; /* extra flags */ + union { + /* expected link's program fd; is specified only if + * BPF_F_REPLACE flag is set in flags. + */ + __u32 old_prog_fd; + /* expected link's map fd; is specified only + * if BPF_F_REPLACE flag is set. + */ + __u32 old_map_fd; + }; + } link_update; + + struct { + __u32 link_fd; + } link_detach; + + struct { /* struct used by BPF_ENABLE_STATS command */ + __u32 type; + } enable_stats; + + struct { /* struct used by BPF_ITER_CREATE command */ + __u32 link_fd; + __u32 flags; + } iter_create; + + struct { /* struct used by BPF_PROG_BIND_MAP command */ + __u32 prog_fd; + __u32 map_fd; + __u32 flags; /* extra flags */ + } prog_bind_map; + +} __attribute__((aligned(8))); + +/* The description below is an attempt at providing documentation to eBPF + * developers about the multiple available eBPF helper functions. It can be + * parsed and used to produce a manual page. The workflow is the following, + * and requires the rst2man utility: + * + * $ ./scripts/bpf_doc.py \ + * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst + * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 + * $ man /tmp/bpf-helpers.7 + * + * Note that in order to produce this external documentation, some RST + * formatting is used in the descriptions to get "bold" and "italics" in + * manual pages. Also note that the few trailing white spaces are + * intentional, removing them would break paragraphs for rst2man. + * + * Start of BPF helper function descriptions: + * + * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + * Description + * Perform a lookup in *map* for an entry associated to *key*. + * Return + * Map value associated to *key*, or **NULL** if no entry was + * found. + * + * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) + * Description + * Add or update the value of the entry associated to *key* in + * *map* with *value*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * Flag value **BPF_NOEXIST** cannot be used for maps of types + * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all + * elements always exist), the helper would return an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_delete_elem(struct bpf_map *map, const void *key) + * Description + * Delete entry with *key* from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) + * Description + * For tracing programs, safely attempt to read *size* bytes from + * kernel space address *unsafe_ptr* and store the data in *dst*. + * + * Generally, use **bpf_probe_read_user**\ () or + * **bpf_probe_read_kernel**\ () instead. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_ktime_get_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does not include time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_MONOTONIC**) + * Return + * Current *ktime*. + * + * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...) + * Description + * This helper is a "printk()-like" facility for debugging. It + * prints a message defined by format *fmt* (of size *fmt_size*) + * to file *\/sys/kernel/tracing/trace* from TraceFS, if + * available. It can take up to three additional **u64** + * arguments (as an eBPF helpers, the total number of arguments is + * limited to five). + * + * Each time the helper is called, it appends a line to the trace. + * Lines are discarded while *\/sys/kernel/tracing/trace* is + * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this. + * The format of the trace is customizable, and the exact output + * one will get depends on the options set in + * *\/sys/kernel/tracing/trace_options* (see also the + * *README* file under the same directory). However, it usually + * defaults to something like: + * + * :: + * + * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg> + * + * In the above: + * + * * ``telnet`` is the name of the current task. + * * ``470`` is the PID of the current task. + * * ``001`` is the CPU number on which the task is + * running. + * * In ``.N..``, each character refers to a set of + * options (whether irqs are enabled, scheduling + * options, whether hard/softirqs are running, level of + * preempt_disabled respectively). **N** means that + * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** + * are set. + * * ``419421.045894`` is a timestamp. + * * ``0x00000001`` is a fake value used by BPF for the + * instruction pointer register. + * * ``<formatted msg>`` is the message formatted with + * *fmt*. + * + * The conversion specifiers supported by *fmt* are similar, but + * more limited than for printk(). They are **%d**, **%i**, + * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, + * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size + * of field, padding with zeroes, etc.) is available, and the + * helper will return **-EINVAL** (but print nothing) if it + * encounters an unknown specifier. + * + * Also, note that **bpf_trace_printk**\ () is slow, and should + * only be used for debugging purposes. For this reason, a notice + * block (spanning several lines) is printed to kernel logs and + * states that the helper should not be used "for production use" + * the first time this helper is used (or more precisely, when + * **trace_printk**\ () buffers are allocated). For passing values + * to user space, perf events should be preferred. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * u32 bpf_get_prandom_u32(void) + * Description + * Get a pseudo-random number. + * + * From a security point of view, this helper uses its own + * pseudo-random internal state, and cannot be used to infer the + * seed of other random functions in the kernel. However, it is + * essential to note that the generator used by the helper is not + * cryptographically secure. + * Return + * A random 32-bit unsigned value. + * + * u32 bpf_get_smp_processor_id(void) + * Description + * Get the SMP (symmetric multiprocessing) processor id. Note that + * all programs run with migration disabled, which means that the + * SMP processor id is stable during all the execution of the + * program. + * Return + * The SMP id of the processor running the program. + * + * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. *flags* are a combination of + * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the + * checksum for the packet after storing the bytes) and + * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ + * **->swhash** and *skb*\ **->l4hash** to 0). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) + * Description + * Recompute the layer 3 (e.g. IP) checksum for the packet + * associated to *skb*. Computation is incremental, so the helper + * must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored in *size*. + * Alternatively, it is possible to store the difference between + * the previous and the new values of the header field in *to*, by + * setting *from* and *size* to 0. For both methods, *offset* + * indicates the location of the IP checksum within the packet. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) + * Description + * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the + * packet associated to *skb*. Computation is incremental, so the + * helper must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored on the lowest + * four bits of *flags*. Alternatively, it is possible to store + * the difference between the previous and the new values of the + * header field in *to*, by setting *from* and the four lowest + * bits of *flags* to 0. For both methods, *offset* indicates the + * location of the IP checksum within the packet. In addition to + * the size of the field, *flags* can be added (bitwise OR) actual + * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left + * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and + * for updates resulting in a null checksum the value is set to + * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates + * the checksum is to be computed against a pseudo-header. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) + * Description + * This special helper is used to trigger a "tail call", or in + * other words, to jump into another eBPF program. The same stack + * frame is used (but values on stack and in registers for the + * caller are not accessible to the callee). This mechanism allows + * for program chaining, either for raising the maximum number of + * available eBPF instructions, or to execute given programs in + * conditional blocks. For security reasons, there is an upper + * limit to the number of successive tail calls that can be + * performed. + * + * Upon call of this helper, the program attempts to jump into a + * program referenced at index *index* in *prog_array_map*, a + * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes + * *ctx*, a pointer to the context. + * + * If the call succeeds, the kernel immediately runs the first + * instruction of the new program. This is not a function call, + * and it never returns to the previous program. If the call + * fails, then the helper has no effect, and the caller continues + * to run its subsequent instructions. A call can fail if the + * destination program for the jump does not exist (i.e. *index* + * is superior to the number of entries in *prog_array_map*), or + * if the maximum number of tail calls has been reached for this + * chain of programs. This limit is defined in the kernel by the + * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), + * which is currently set to 33. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) + * Description + * Clone and redirect the packet associated to *skb* to another + * net device of index *ifindex*. Both ingress and egress + * interfaces can be used for redirection. The **BPF_F_INGRESS** + * value in *flags* is used to make the distinction (ingress path + * is selected if the flag is present, egress path otherwise). + * This is the only flag supported for now. + * + * In comparison with **bpf_redirect**\ () helper, + * **bpf_clone_redirect**\ () has the associated cost of + * duplicating the packet buffer, but this can be executed out of + * the eBPF program. Conversely, **bpf_redirect**\ () is more + * efficient, but it is handled through an action code where the + * redirection happens only after the eBPF program has returned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. Positive + * error indicates a potential drop or congestion in the target + * device. The particular positive error codes are not defined. + * + * u64 bpf_get_current_pid_tgid(void) + * Description + * Get the current pid and tgid. + * Return + * A 64-bit integer containing the current tgid and pid, and + * created as such: + * *current_task*\ **->tgid << 32 \|** + * *current_task*\ **->pid**. + * + * u64 bpf_get_current_uid_gid(void) + * Description + * Get the current uid and gid. + * Return + * A 64-bit integer containing the current GID and UID, and + * created as such: *current_gid* **<< 32 \|** *current_uid*. + * + * long bpf_get_current_comm(void *buf, u32 size_of_buf) + * Description + * Copy the **comm** attribute of the current task into *buf* of + * *size_of_buf*. The **comm** attribute contains the name of + * the executable (excluding the path) for the current task. The + * *size_of_buf* must be strictly positive. On success, the + * helper makes sure that the *buf* is NUL-terminated. On failure, + * it is filled with zeroes. + * Return + * 0 on success, or a negative error in case of failure. + * + * u32 bpf_get_cgroup_classid(struct sk_buff *skb) + * Description + * Retrieve the classid for the current task, i.e. for the net_cls + * cgroup to which *skb* belongs. + * + * This helper can be used on TC egress path, but not on ingress. + * + * The net_cls cgroup provides an interface to tag network packets + * based on a user-provided identifier for all traffic coming from + * the tasks belonging to the related cgroup. See also the related + * kernel documentation, available from the Linux sources in file + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. + * + * The Linux kernel has two versions for cgroups: there are + * cgroups v1 and cgroups v2. Both are available to users, who can + * use a mixture of them, but note that the net_cls cgroup is for + * cgroup v1 only. This makes it incompatible with BPF programs + * run on cgroups, which is a cgroup-v2-only feature (a socket can + * only hold data for one version of cgroups at a time). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to + * "**y**" or to "**m**". + * Return + * The classid, or 0 for the default unconfigured classid. + * + * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) + * Description + * Push a *vlan_tci* (VLAN tag control information) of protocol + * *vlan_proto* to the packet associated to *skb*, then update + * the checksum. Note that if *vlan_proto* is different from + * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to + * be **ETH_P_8021Q**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_vlan_pop(struct sk_buff *skb) + * Description + * Pop a VLAN header from the packet associated to *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Get tunnel metadata. This helper takes a pointer *key* to an + * empty **struct bpf_tunnel_key** of **size**, that will be + * filled with tunnel metadata for the packet associated to *skb*. + * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which + * indicates that the tunnel is based on IPv6 protocol instead of + * IPv4. + * + * The **struct bpf_tunnel_key** is an object that generalizes the + * principal parameters used by various tunneling protocols into a + * single struct. This way, it can be used to easily make a + * decision based on the contents of the encapsulation header, + * "summarized" in this struct. In particular, it holds the IP + * address of the remote end (IPv4 or IPv6, depending on the case) + * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, + * this struct exposes the *key*\ **->tunnel_id**, which is + * generally mapped to a VNI (Virtual Network Identifier), making + * it programmable together with the **bpf_skb_set_tunnel_key**\ + * () helper. + * + * Let's imagine that the following code is part of a program + * attached to the TC ingress interface, on one end of a GRE + * tunnel, and is supposed to filter out all messages coming from + * remote ends with IPv4 address other than 10.0.0.1: + * + * :: + * + * int ret; + * struct bpf_tunnel_key key = {}; + * + * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + * if (ret < 0) + * return TC_ACT_SHOT; // drop packet + * + * if (key.remote_ipv4 != 0x0a000001) + * return TC_ACT_SHOT; // drop packet + * + * return TC_ACT_OK; // accept packet + * + * This interface can also be used with all encapsulation devices + * that can operate in "collect metadata" mode: instead of having + * one network device per specific configuration, the "collect + * metadata" mode only requires a single device where the + * configuration can be extracted from this helper. + * + * This can be used together with various tunnels such as VXLan, + * Geneve, GRE or IP in IP (IPIP). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Populate tunnel metadata for packet associated to *skb.* The + * tunnel metadata is set to the contents of *key*, of *size*. The + * *flags* can be set to a combination of the following values: + * + * **BPF_F_TUNINFO_IPV6** + * Indicate that the tunnel is based on IPv6 protocol + * instead of IPv4. + * **BPF_F_ZERO_CSUM_TX** + * For IPv4 packets, add a flag to tunnel metadata + * indicating that checksum computation should be skipped + * and checksum set to zeroes. + * **BPF_F_DONT_FRAGMENT** + * Add a flag to tunnel metadata indicating that the + * packet should not be fragmented. + * **BPF_F_SEQ_NUMBER** + * Add a flag to tunnel metadata indicating that a + * sequence number should be added to tunnel header before + * sending the packet. This flag was added for GRE + * encapsulation, but might be used with other protocols + * as well in the future. + * **BPF_F_NO_TUNNEL_KEY** + * Add a flag to tunnel metadata indicating that no tunnel + * key should be set in the resulting tunnel header. + * + * Here is a typical usage on the transmit path: + * + * :: + * + * struct bpf_tunnel_key key; + * populate key ... + * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); + * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); + * + * See also the description of the **bpf_skb_get_tunnel_key**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) + * Description + * Read the value of a perf event counter. This helper relies on a + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of + * the perf event counter is selected when *map* is updated with + * perf event file descriptors. The *map* is an array whose size + * is the number of available CPUs, and each cell contains a value + * relative to one CPU. The value to retrieve is indicated by + * *flags*, that contains the index of the CPU to look up, masked + * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * Note that before Linux 4.13, only hardware perf event can be + * retrieved. + * + * Also, be aware that the newer helper + * **bpf_perf_event_read_value**\ () is recommended over + * **bpf_perf_event_read**\ () in general. The latter has some ABI + * quirks where error and counter value are used as a return code + * (which is wrong to do since ranges may overlap). This issue is + * fixed with **bpf_perf_event_read_value**\ (), which at the same + * time provides more features over the **bpf_perf_event_read**\ + * () interface. Please refer to the description of + * **bpf_perf_event_read_value**\ () for details. + * Return + * The value of the perf event counter read from the map, or a + * negative error code in case of failure. + * + * long bpf_redirect(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_clone_redirect**\ + * (), except that the packet is not cloned, which provides + * increased performance. + * + * Except for XDP, both ingress and egress interfaces can be used + * for redirection. The **BPF_F_INGRESS** value in *flags* is used + * to make the distinction (ingress path is selected if the flag + * is present, egress path otherwise). Currently, XDP only + * supports redirection to the egress interface, and accepts no + * flag at all. + * + * The same effect can also be attained with the more generic + * **bpf_redirect_map**\ (), which uses a BPF map to store the + * redirect target instead of providing it directly to the helper. + * Return + * For XDP, the helper returns **XDP_REDIRECT** on success or + * **XDP_ABORTED** on error. For other program types, the values + * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on + * error. + * + * u32 bpf_get_route_realm(struct sk_buff *skb) + * Description + * Retrieve the realm or the route, that is to say the + * **tclassid** field of the destination for the *skb*. The + * identifier retrieved is a user-provided tag, similar to the + * one used with the net_cls cgroup (see description for + * **bpf_get_cgroup_classid**\ () helper), but here this tag is + * held by a route (a destination entry), not by a task. + * + * Retrieving this identifier works with the clsact TC egress hook + * (see also **tc-bpf(8)**), or alternatively on conventional + * classful egress qdiscs, but not on TC ingress path. In case of + * clsact TC egress hook, this has the advantage that, internally, + * the destination entry has not been dropped yet in the transmit + * path. Therefore, the destination entry does not need to be + * artificially held via **netif_keep_dst**\ () for a classful + * qdisc until the *skb* is freed. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_IP_ROUTE_CLASSID** configuration option. + * Return + * The realm of the route for the packet associated to *skb*, or 0 + * if none was found. + * + * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * The context of the program *ctx* needs also be passed to the + * helper. + * + * On user space, a program willing to read the values needs to + * call **perf_event_open**\ () on the perf event (either for + * one or for all CPUs) and to store the file descriptor into the + * *map*. This must be done before the eBPF program can send data + * into it. An example is available in file + * *samples/bpf/trace_output_user.c* in the Linux kernel source + * tree (the eBPF program counterpart is in + * *samples/bpf/trace_output_kern.c*). + * + * **bpf_perf_event_output**\ () achieves better performance + * than **bpf_trace_printk**\ () for sharing data with user + * space, and is much better suitable for streaming data from eBPF + * programs. + * + * Note that this helper is not restricted to tracing use cases + * and can be used with programs attached to TC or XDP as well, + * where it allows for passing data to user space listeners. Data + * can be: + * + * * Only custom structs, + * * Only the packet payload, or + * * A combination of both. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) + * Description + * This helper was provided as an easy way to load data from a + * packet. It can be used to load *len* bytes from *offset* from + * the packet associated to *skb*, into the buffer pointed by + * *to*. + * + * Since Linux 4.7, usage of this helper has mostly been replaced + * by "direct packet access", enabling packet data to be + * manipulated with *skb*\ **->data** and *skb*\ **->data_end** + * pointing respectively to the first byte of packet data and to + * the byte after the last byte of packet data. However, it + * remains useful if one wishes to read large quantities of data + * at once from a packet into the eBPF stack. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) + * Description + * Walk a user or a kernel stack and return its id. To achieve + * this, the helper needs *ctx*, which is a pointer to the context + * on which the tracing program is executed, and a pointer to a + * *map* of type **BPF_MAP_TYPE_STACK_TRACE**. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * a combination of the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_FAST_STACK_CMP** + * Compare stacks by hash only. + * **BPF_F_REUSE_STACKID** + * If two different stacks hash into the same *stackid*, + * discard the old one. + * + * The stack id retrieved is a 32 bit long integer handle which + * can be further combined with other data (including other stack + * ids) and used as a key into maps. This can be useful for + * generating a variety of graphs (such as flame graphs or off-cpu + * graphs). + * + * For walking a stack, this helper is an improvement over + * **bpf_probe_read**\ (), which can be used with unrolled loops + * but is not efficient and consumes a lot of eBPF instructions. + * Instead, **bpf_get_stackid**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The positive or null stack id on success, or a negative error + * in case of failure. + * + * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) + * Description + * Compute a checksum difference, from the raw buffer pointed by + * *from*, of length *from_size* (that must be a multiple of 4), + * towards the raw buffer pointed by *to*, of size *to_size* + * (same remark). An optional *seed* can be added to the value + * (this can be cascaded, the seed may come from a previous call + * to the helper). + * + * This is flexible enough to be used in several ways: + * + * * With *from_size* == 0, *to_size* > 0 and *seed* set to + * checksum, it can be used when pushing new data. + * * With *from_size* > 0, *to_size* == 0 and *seed* set to + * checksum, it can be used when removing data from a packet. + * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it + * can be used to compute a diff. Note that *from_size* and + * *to_size* do not need to be equal. + * + * This helper can be used in combination with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to + * which one can feed in the difference computed with + * **bpf_csum_diff**\ (). + * Return + * The checksum result, or a negative error code in case of + * failure. + * + * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Retrieve tunnel options metadata for the packet associated to + * *skb*, and store the raw tunnel option data to the buffer *opt* + * of *size*. + * + * This helper can be used with encapsulation devices that can + * operate in "collect metadata" mode (please refer to the related + * note in the description of **bpf_skb_get_tunnel_key**\ () for + * more details). A particular example where this can be used is + * in combination with the Geneve encapsulation protocol, where it + * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) + * and retrieving arbitrary TLVs (Type-Length-Value headers) from + * the eBPF program. This allows for full customization of these + * headers. + * Return + * The size of the option data retrieved. + * + * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Set tunnel options metadata for the packet associated to *skb* + * to the option data contained in the raw buffer *opt* of *size*. + * + * See also the description of the **bpf_skb_get_tunnel_opt**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) + * Description + * Change the protocol of the *skb* to *proto*. Currently + * supported are transition from IPv4 to IPv6, and from IPv6 to + * IPv4. The helper takes care of the groundwork for the + * transition, including resizing the socket buffer. The eBPF + * program is expected to fill the new headers, if any, via + * **skb_store_bytes**\ () and to recompute the checksums with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ + * (). The main case for this helper is to perform NAT64 + * operations out of an eBPF program. + * + * Internally, the GSO type is marked as dodgy so that headers are + * checked and segments are recalculated by the GSO/GRO engine. + * The size for GSO target is adapted as well. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_type(struct sk_buff *skb, u32 type) + * Description + * Change the packet type for the packet associated to *skb*. This + * comes down to setting *skb*\ **->pkt_type** to *type*, except + * the eBPF program does not have a write access to *skb*\ + * **->pkt_type** beside this helper. Using a helper here allows + * for graceful handling of errors. + * + * The major use case is to change incoming *skb*s to + * **PACKET_HOST** in a programmatic way instead of having to + * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for + * example. + * + * Note that *type* only allows certain values. At this time, they + * are: + * + * **PACKET_HOST** + * Packet is for us. + * **PACKET_BROADCAST** + * Send packet to all. + * **PACKET_MULTICAST** + * Send packet to group. + * **PACKET_OTHERHOST** + * Send packet to someone else. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) + * Description + * Check whether *skb* is a descendant of the cgroup2 held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 0, if the *skb* failed the cgroup2 descendant test. + * * 1, if the *skb* succeeded the cgroup2 descendant test. + * * A negative error code, if an error occurred. + * + * u32 bpf_get_hash_recalc(struct sk_buff *skb) + * Description + * Retrieve the hash of the packet, *skb*\ **->hash**. If it is + * not set, in particular if the hash was cleared due to mangling, + * recompute this hash. Later accesses to the hash can be done + * directly with *skb*\ **->hash**. + * + * Calling **bpf_set_hash_invalid**\ (), changing a packet + * prototype with **bpf_skb_change_proto**\ (), or calling + * **bpf_skb_store_bytes**\ () with the + * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear + * the hash and to trigger a new computation for the next call to + * **bpf_get_hash_recalc**\ (). + * Return + * The 32-bit hash. + * + * u64 bpf_get_current_task(void) + * Description + * Get the current task. + * Return + * A pointer to the current task struct. + * + * long bpf_probe_write_user(void *dst, const void *src, u32 len) + * Description + * Attempt in a safe way to write *len* bytes from the buffer + * *src* to *dst* in memory. It only works for threads that are in + * user context, and *dst* must be a valid user space address. + * + * This helper should not be used to implement any kind of + * security mechanism because of TOC-TOU attacks, but rather to + * debug, divert, and manipulate execution of semi-cooperative + * processes. + * + * Keep in mind that this feature is meant for experiments, and it + * has a risk of crashing the system and running programs. + * Therefore, when an eBPF program using this helper is attached, + * a warning including PID and process name is printed to kernel + * logs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) + * Description + * Check whether the probe is being run is the context of a given + * subset of the cgroup2 hierarchy. The cgroup2 to test is held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 1, if current task belongs to the cgroup2. + * * 0, if current task does not belong to the cgroup2. + * * A negative error code, if an error occurred. + * + * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Resize (trim or grow) the packet associated to *skb* to the + * new *len*. The *flags* are reserved for future usage, and must + * be left at zero. + * + * The basic idea is that the helper performs the needed work to + * change the size of the packet, then the eBPF program rewrites + * the rest via helpers like **bpf_skb_store_bytes**\ (), + * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () + * and others. This helper is a slow path utility intended for + * replies with control messages. And because it is targeted for + * slow path, the helper itself can afford to be slow: it + * implicitly linearizes, unclones and drops offloads from the + * *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_pull_data(struct sk_buff *skb, u32 len) + * Description + * Pull in non-linear data in case the *skb* is non-linear and not + * all of *len* are part of the linear section. Make *len* bytes + * from *skb* readable and writable. If a zero value is passed for + * *len*, then all bytes in the linear part of *skb* will be made + * readable and writable. + * + * This helper is only needed for reading and writing with direct + * packet access. + * + * For direct packet access, testing that offsets to access + * are within packet boundaries (test on *skb*\ **->data_end**) is + * susceptible to fail if offsets are invalid, or if the requested + * data is in non-linear parts of the *skb*. On failure the + * program can just bail out, or in the case of a non-linear + * buffer, use a helper to make the data available. The + * **bpf_skb_load_bytes**\ () helper is a first solution to access + * the data. Another one consists in using **bpf_skb_pull_data** + * to pull in once the non-linear parts, then retesting and + * eventually access the data. + * + * At the same time, this also makes sure the *skb* is uncloned, + * which is a necessary condition for direct write. As this needs + * to be an invariant for the write part only, the verifier + * detects writes and adds a prologue that is calling + * **bpf_skb_pull_data()** to effectively unclone the *skb* from + * the very beginning in case it is indeed cloned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) + * Description + * Add the checksum *csum* into *skb*\ **->csum** in case the + * driver has supplied a checksum for the entire packet into that + * field. Return an error otherwise. This helper is intended to be + * used in combination with **bpf_csum_diff**\ (), in particular + * when the checksum needs to be updated after data has been + * written into the packet through direct packet access. + * Return + * The checksum on success, or a negative error code in case of + * failure. + * + * void bpf_set_hash_invalid(struct sk_buff *skb) + * Description + * Invalidate the current *skb*\ **->hash**. It can be used after + * mangling on headers through direct packet access, in order to + * indicate that the hash is outdated and to trigger a + * recalculation the next time the kernel tries to access this + * hash or when the **bpf_get_hash_recalc**\ () helper is called. + * Return + * void. + * + * long bpf_get_numa_node_id(void) + * Description + * Return the id of the current NUMA node. The primary use case + * for this helper is the selection of sockets for the local NUMA + * node, when the program is attached to sockets using the + * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), + * but the helper is also available to other eBPF program types, + * similarly to **bpf_get_smp_processor_id**\ (). + * Return + * The id of current NUMA node. + * + * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Grows headroom of packet associated to *skb* and adjusts the + * offset of the MAC header accordingly, adding *len* bytes of + * space. It automatically extends and reallocates memory as + * required. + * + * This helper can be used on a layer 3 *skb* to push a MAC header + * for redirection into a layer 2 device. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that + * it is possible to use a negative value for *delta*. This helper + * can be used to prepare the packet for pushing or popping + * headers. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address + * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for + * more details. + * + * Generally, use **bpf_probe_read_user_str**\ () or + * **bpf_probe_read_kernel_str**\ () instead. + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * u64 bpf_get_socket_cookie(struct sk_buff *skb) + * Description + * If the **struct sk_buff** pointed by *skb* has a known socket, + * retrieve the cookie (generated by the kernel) of this socket. + * If no cookie has been set yet, generate a new cookie. Once + * generated, the socket cookie remains stable for the life of the + * socket. This helper can be useful for monitoring per socket + * networking traffic statistics as it provides a global socket + * identifier that can be assumed unique. + * Return + * A 8-byte long unique number on success, or 0 if the socket + * field is missing inside *skb*. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) + * Description + * Equivalent to bpf_get_socket_cookie() helper that accepts + * *skb*, but gets socket from **struct bpf_sock_addr** context. + * Return + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *skb*, but gets socket from **struct bpf_sock_ops** context. + * Return + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct sock *sk) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *sk*, but gets socket from a BTF **struct sock**. This helper + * also works for sleepable programs. + * Return + * A 8-byte long unique number or 0 if *sk* is NULL. + * + * u32 bpf_get_socket_uid(struct sk_buff *skb) + * Description + * Get the owner UID of the socked associated to *skb*. + * Return + * The owner UID of the socket associated to *skb*. If the socket + * is **NULL**, or if it is not a full socket (i.e. if it is a + * time-wait or a request socket instead), **overflowuid** value + * is returned (note that **overflowuid** might also be the actual + * UID value for the socket). + * + * long bpf_set_hash(struct sk_buff *skb, u32 hash) + * Description + * Set the full hash for *skb* (set the field *skb*\ **->hash**) + * to value *hash*. + * Return + * 0 + * + * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **setsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **setsockopt(2)** for more information. + * The option value of length *optlen* is pointed by *optval*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. + * + * This helper actually implements a subset of **setsockopt()**. + * It supports the following *level*\ s: + * + * * **SOL_SOCKET**, which supports the following *optname*\ s: + * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, + * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, + * **SO_BINDTODEVICE**, **SO_KEEPALIVE**, **SO_REUSEADDR**, + * **SO_REUSEPORT**, **SO_BINDTOIFINDEX**, **SO_TXREHASH**. + * * **IPPROTO_TCP**, which supports the following *optname*\ s: + * **TCP_CONGESTION**, **TCP_BPF_IW**, + * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, + * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, + * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**, + * **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**, + * **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**, + * **TCP_BPF_RTO_MIN**. + * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. + * * **IPPROTO_IPV6**, which supports the following *optname*\ s: + * **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) + * Description + * Grow or shrink the room for data in the packet associated to + * *skb* by *len_diff*, and according to the selected *mode*. + * + * By default, the helper will reset any offloaded checksum + * indicator of the skb to CHECKSUM_NONE. This can be avoided + * by the following flag: + * + * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded + * checksum data of the skb to CHECKSUM_NONE. + * + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed between the layer 2 and + * layer 3 headers). + * + * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer + * (room space is added or removed between the layer 3 and + * layer 4 headers). + * + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: + * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the + * L2 type as Ethernet. + * + * * **BPF_F_ADJ_ROOM_DECAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_DECAP_L3_IPV6**: + * Indicate the new IP header version after decapsulating the outer + * IP header. Used when the inner and outer IP versions are different. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_redirect_map(struct bpf_map *map, u64 key, u64 flags) + * Description + * Redirect the packet to the endpoint referenced by *map* at + * index *key*. Depending on its type, this *map* can contain + * references to net devices (for forwarding packets through other + * ports), or to CPUs (for redirecting XDP frames to another CPU; + * but this is only implemented for native XDP (with driver + * support) as of this writing). + * + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to **XDP_TX**, as chosen + * by the caller. The higher bits of *flags* can be set to + * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below. + * + * With BPF_F_BROADCAST the packet will be broadcasted to all the + * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress + * interface will be excluded when do broadcasting. + * + * See also **bpf_redirect**\ (), which only supports redirecting + * to an ifindex, but doesn't require a map to do so. + * Return + * **XDP_REDIRECT** on success, or the value of the two lower bits + * of the *flags* argument on error. + * + * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) + * Description + * Redirect the packet to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a *map* referencing sockets. The + * *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust the address pointed by *xdp_md*\ **->data_meta** by + * *delta* (which can be positive or negative). Note that this + * operation modifies the address stored in *xdp_md*\ **->data**, + * so the latter must be loaded only after the helper has been + * called. + * + * The use of *xdp_md*\ **->data_meta** is optional and programs + * are not required to use it. The rationale is that when the + * packet is processed with XDP (e.g. as DoS filter), it is + * possible to push further meta data along with it before passing + * to the stack, and to give the guarantee that an ingress eBPF + * program attached as a TC classifier on the same device can pick + * this up for further post-processing. Since TC works with socket + * buffers, it remains possible to set from XDP the **mark** or + * **priority** pointers, or other pointers for the socket buffer. + * Having this scratch space generic and programmable allows for + * more flexibility as the user is free to store whatever meta + * data they need. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * Read the value of a perf event counter, and store it into *buf* + * of size *buf_size*. This helper relies on a *map* of type + * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event + * counter is selected when *map* is updated with perf event file + * descriptors. The *map* is an array whose size is the number of + * available CPUs, and each cell contains a value relative to one + * CPU. The value to retrieve is indicated by *flags*, that + * contains the index of the CPU to look up, masked with + * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * This helper behaves in a way close to + * **bpf_perf_event_read**\ () helper, save that instead of + * just returning the value observed, it fills the *buf* + * structure. This allows for additional data to be retrieved: in + * particular, the enabled and running times (in *buf*\ + * **->enabled** and *buf*\ **->running**, respectively) are + * copied. In general, **bpf_perf_event_read_value**\ () is + * recommended over **bpf_perf_event_read**\ (), which has some + * ABI issues and provides fewer functionalities. + * + * These values are interesting, because hardware PMU (Performance + * Monitoring Unit) counters are limited resources. When there are + * more PMU based perf events opened than available counters, + * kernel will multiplex these events so each event gets certain + * percentage (but not all) of the PMU time. In case that + * multiplexing happens, the number of samples or counter value + * will not reflect the case compared to when no multiplexing + * occurs. This makes comparison between different runs difficult. + * Typically, the counter value should be normalized before + * comparing to other experiments. The usual normalization is done + * as follows. + * + * :: + * + * normalized_counter = counter * t_enabled / t_running + * + * Where t_enabled is the time enabled for event and t_running is + * the time running for event since last normalization. The + * enabled and running times are accumulated since the perf event + * open. To achieve scaling factor between two invocations of an + * eBPF program, users can use CPU id as the key (which is + * typical for perf array usage model) to remember the previous + * value and do the calculation inside the eBPF program. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * For an eBPF program attached to a perf event, retrieve the + * value of the event counter associated to *ctx* and store it in + * the structure pointed by *buf* and of size *buf_size*. Enabled + * and running times are also stored in the structure (see + * description of helper **bpf_perf_event_read_value**\ () for + * more details). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **getsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **getsockopt(2)** for more information. + * The retrieved value is stored in the structure pointed by + * *opval* and of length *optlen*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. + * + * This helper actually implements a subset of **getsockopt()**. + * It supports the same set of *optname*\ s that is supported by + * the **bpf_setsockopt**\ () helper. The exceptions are + * **TCP_BPF_*** is **bpf_setsockopt**\ () only and + * **TCP_SAVED_SYN** is **bpf_getsockopt**\ () only. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_override_return(struct pt_regs *regs, u64 rc) + * Description + * Used for error injection, this helper uses kprobes to override + * the return value of the probed function, and to set it to *rc*. + * The first argument is the context *regs* on which the kprobe + * works. + * + * This helper works by setting the PC (program counter) + * to an override function which is run in place of the original + * probed function. This means the probed function is not run at + * all. The replacement function just returns with the required + * value. + * + * This helper has security implications, and thus is subject to + * restrictions. It is only available if the kernel was compiled + * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration + * option, and in this case it only works on functions tagged with + * **ALLOW_ERROR_INJECTION** in the kernel code. + * + * Also, the helper is only available for the architectures having + * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing, + * x86 architecture is the only one to support this feature. + * Return + * 0 + * + * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) + * Description + * Attempt to set the value of the **bpf_sock_ops_cb_flags** field + * for the full TCP socket associated to *bpf_sock_ops* to + * *argval*. + * + * The primary use of this field is to determine if there should + * be calls to eBPF programs of type + * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP + * code. A program of the same type can change its value, per + * connection and as necessary, when the connection is + * established. This field is directly accessible for reading, but + * this helper must be used for updates in order to return an + * error if an eBPF program tries to set a callback that is not + * supported in the current kernel. + * + * *argval* is a flag array which can combine these flags: + * + * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) + * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) + * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) + * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) + * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * + * Here are some examples of where one could call such eBPF + * program: + * + * * When RTO fires. + * * When a packet is retransmitted. + * * When the connection terminates. + * * When a packet is sent. + * * When a packet is received. + * Return + * Code **-EINVAL** if the socket is not a full TCP socket; + * otherwise, a positive number containing the bits that could not + * be set is returned (which comes down to 0 if all bits were set + * as required). + * + * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, apply the verdict of the eBPF program to + * the next *bytes* (number of bytes) of message *msg*. + * + * For example, this helper can be used in the following cases: + * + * * A single **sendmsg**\ () or **sendfile**\ () system call + * contains multiple logical messages that the eBPF program is + * supposed to read and for which it should apply a verdict. + * * An eBPF program only cares to read the first *bytes* of a + * *msg*. If the message has a large payload, then setting up + * and calling the eBPF program repeatedly for all bytes, even + * though the verdict is already known, would create unnecessary + * overhead. + * + * When called from within an eBPF program, the helper sets a + * counter internal to the BPF infrastructure, that is used to + * apply the last verdict to the next *bytes*. If *bytes* is + * smaller than the current data being processed from a + * **sendmsg**\ () or **sendfile**\ () system call, the first + * *bytes* will be sent and the eBPF program will be re-run with + * the pointer for start of data pointing to byte number *bytes* + * **+ 1**. If *bytes* is larger than the current data being + * processed, then the eBPF verdict will be applied to multiple + * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are + * consumed. + * + * Note that if a socket closes with the internal counter holding + * a non-zero value, this is not a problem because data is not + * being buffered for *bytes* and is sent as it is received. + * Return + * 0 + * + * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, prevent the execution of the verdict eBPF + * program for message *msg* until *bytes* (byte number) have been + * accumulated. + * + * This can be used when one needs a specific number of bytes + * before a verdict can be assigned, even if the data spans + * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme + * case would be a user calling **sendmsg**\ () repeatedly with + * 1-byte long message segments. Obviously, this is bad for + * performance, but it is still valid. If the eBPF program needs + * *bytes* bytes to validate a header, this helper can be used to + * prevent the eBPF program to be called again until *bytes* have + * been accumulated. + * Return + * 0 + * + * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) + * Description + * For socket policies, pull in non-linear data from user space + * for *msg* and set pointers *msg*\ **->data** and *msg*\ + * **->data_end** to *start* and *end* bytes offsets into *msg*, + * respectively. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it can only parse data that the (**data**, **data_end**) + * pointers have already consumed. For **sendmsg**\ () hooks this + * is likely the first scatterlist element. But for calls relying + * on the **sendpage** handler (e.g. **sendfile**\ ()) this will + * be the range (**0**, **0**) because the data is shared with + * user space and by default the objective is to avoid allowing + * user space to modify data while (or after) eBPF verdict is + * being decided. This helper can be used to pull in data and to + * set the start and end pointer to given values. Data will be + * copied if necessary (i.e. if data was not linear and if start + * and end pointers do not point to the same chunk). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) + * Description + * Bind the socket associated to *ctx* to the address pointed by + * *addr*, of length *addr_len*. This allows for making outgoing + * connection from the desired IP address, which can be useful for + * example when all processes inside a cgroup should use one + * single IP address on a host that has multiple IP configured. + * + * This helper works for IPv4 and IPv6, TCP and UDP sockets. The + * domain (*addr*\ **->sa_family**) must be **AF_INET** (or + * **AF_INET6**). It's advised to pass zero port (**sin_port** + * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like + * behavior and lets the kernel efficiently pick up an unused + * port as long as 4-tuple is unique. Passing non-zero port might + * lead to degraded performance. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is + * possible to both shrink and grow the packet tail. + * Shrink done via *delta* being a negative integer. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) + * Description + * Retrieve the XFRM state (IP transform framework, see also + * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. + * + * The retrieved value is stored in the **struct bpf_xfrm_state** + * pointed by *xfrm_state* and of length *size*. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_XFRM** configuration option. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * To achieve this, the helper needs *ctx*, which is a pointer + * to the context on which the tracing program is executed. + * To store the stacktrace, the bpf program provides *buf* with + * a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_USER_BUILD_ID** + * Collect (build_id, file_offset) instead of ips for user + * stack, only valid if **BPF_F_USER_STACK** is also + * specified. + * + * *file_offset* is an offset relative to the beginning + * of the executable or shared object file backing the vma + * which the *ip* falls in. It is *not* an offset relative + * to that object's base address. Accordingly, it must be + * adjusted by adding (sh_addr - sh_offset), where + * sh_{addr,offset} correspond to the executable section + * containing *file_offset* in the object, for comparisons + * to symbols' st_value to be valid. + * + * **bpf_get_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. + * + * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) + * Description + * This helper is similar to **bpf_skb_load_bytes**\ () in that + * it provides an easy way to load *len* bytes from *offset* + * from the packet associated to *skb*, into the buffer pointed + * by *to*. The difference to **bpf_skb_load_bytes**\ () is that + * a fifth argument *start_header* exists in order to select a + * base offset to start from. *start_header* can be one of: + * + * **BPF_HDR_START_MAC** + * Base offset to load data from is *skb*'s mac header. + * **BPF_HDR_START_NET** + * Base offset to load data from is *skb*'s network header. + * + * In general, "direct packet access" is the preferred method to + * access packet data, however, this helper is in particular useful + * in socket filters where *skb*\ **->data** does not always point + * to the start of the mac header and where "direct packet access" + * is not available. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) + * Description + * Do FIB lookup in kernel tables using parameters in *params*. + * If lookup is successful and result shows packet is to be + * forwarded, the neighbor tables are searched for the nexthop. + * If successful (ie., FIB lookup shows forwarding and nexthop + * is resolved), the nexthop address is returned in ipv4_dst + * or ipv6_dst based on family, smac is set to mac address of + * egress device, dmac is set to nexthop mac address, rt_metric + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. + * + * *plen* argument is the size of the passed in struct. + * *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_FIB_LOOKUP_DIRECT** + * Do a direct table lookup vs full lookup using FIB + * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. + * **BPF_FIB_LOOKUP_OUTPUT** + * Perform lookup from an egress perspective (default is + * ingress). + * **BPF_FIB_LOOKUP_SKIP_NEIGH** + * Skip the neighbour table lookup. *params*->dmac + * and *params*->smac will not be set as output. A common + * use case is to call **bpf_redirect_neigh**\ () after + * doing **bpf_fib_lookup**\ (). + * **BPF_FIB_LOOKUP_SRC** + * Derive and set source IP addr in *params*->ipv{4,6}_src + * for the nexthop. If the src addr cannot be derived, + * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this + * case, *params*->dmac and *params*->smac are not set either. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** tc cls_act programs. + * Return + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * packet is not forwarded or needs assist from full stack + * + * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU + * was exceeded and output params->mtu_result contains the MTU. + * + * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a sockhash *map* referencing sockets. + * The *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. + * if the verdict eBPF program returns **SK_PASS**), redirect it + * to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) + * Description + * Encapsulate the packet associated to *skb* within a Layer 3 + * protocol header. This header is provided in the buffer at + * address *hdr*, with *len* its size in bytes. *type* indicates + * the protocol of the header and can be one of: + * + * **BPF_LWT_ENCAP_SEG6** + * IPv6 encapsulation with Segment Routing Header + * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, + * the IPv6 header is computed by the kernel. + * **BPF_LWT_ENCAP_SEG6_INLINE** + * Only works if *skb* contains an IPv6 packet. Insert a + * Segment Routing Header (**struct ipv6_sr_hdr**) inside + * the IPv6 header. + * **BPF_LWT_ENCAP_IP** + * IP encapsulation (GRE/GUE/IPIP/etc). The outer header + * must be IPv4 or IPv6, followed by zero or more + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. Only the flags, tag and TLVs + * inside the outermost IPv6 Segment Routing Header can be + * modified through this helper. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) + * Description + * Adjust the size allocated to TLVs in the outermost IPv6 + * Segment Routing Header contained in the packet associated to + * *skb*, at position *offset* by *delta* bytes. Only offsets + * after the segments are accepted. *delta* can be as well + * positive (growing) as negative (shrinking). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) + * Description + * Apply an IPv6 Segment Routing action of type *action* to the + * packet associated to *skb*. Each action takes a parameter + * contained at address *param*, and of length *param_len* bytes. + * *action* can be one of: + * + * **SEG6_LOCAL_ACTION_END_X** + * End.X action: Endpoint with Layer-3 cross-connect. + * Type of *param*: **struct in6_addr**. + * **SEG6_LOCAL_ACTION_END_T** + * End.T action: Endpoint with specific IPv6 table lookup. + * Type of *param*: **int**. + * **SEG6_LOCAL_ACTION_END_B6** + * End.B6 action: Endpoint bound to an SRv6 policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * **SEG6_LOCAL_ACTION_END_B6_ENCAP** + * End.B6.Encap action: Endpoint bound to an SRv6 + * encapsulation policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_repeat(void *ctx) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded repeat key message. This delays + * the generation of a key up event for previously generated + * key down event. + * + * Some IR protocols like NEC have a special IR message for + * repeating last button, for when a button is held down. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded key press with *scancode*, + * *toggle* value in the given *protocol*. The scancode will be + * translated to a keycode using the rc keymap, and reported as + * an input key down event. After a period a key up event is + * generated. This period can be extended by calling either + * **bpf_rc_keydown**\ () again with the same values, or calling + * **bpf_rc_repeat**\ (). + * + * Some protocols include a toggle bit, in case the button was + * released and pressed again between consecutive scancodes. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * The *protocol* is the decoded protocol number (see + * **enum rc_proto** for some predefined values). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * u64 bpf_skb_cgroup_id(struct sk_buff *skb) + * Description + * Return the cgroup v2 id of the socket associated with the *skb*. + * This is roughly similar to the **bpf_get_cgroup_classid**\ () + * helper for cgroup v1 by providing a tag resp. identifier that + * can be matched on or used for map lookups e.g. to implement + * policy. The cgroup v2 id of a given path in the hierarchy is + * exposed in user space through the f_handle API in order to get + * to the same 64-bit id. + * + * This helper can be used on TC egress path, but not on ingress, + * and is available only if the kernel was compiled with the + * **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_get_current_cgroup_id(void) + * Description + * Get the current cgroup id based on the cgroup within which + * the current task is running. + * Return + * A 64-bit integer containing the current cgroup id based + * on the cgroup within which the current task is running. + * + * void *bpf_get_local_storage(void *map, u64 flags) + * Description + * Get the pointer to the local storage area. + * The type and the size of the local storage is defined + * by the *map* argument. + * The *flags* meaning is specific for each map type, + * and has to be 0 for cgroup local storage. + * + * Depending on the BPF program type, a local storage area + * can be shared between multiple instances of the BPF program, + * running simultaneously. + * + * A user should care about the synchronization by himself. + * For example, by using the **BPF_ATOMIC** instructions to alter + * the shared data. + * Return + * A pointer to the local storage area. + * + * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) + * Description + * Select a **SO_REUSEPORT** socket from a + * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*. + * It checks the selected socket is matching the incoming + * request in the socket buffer. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *skb* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *skb*, then return value will be same as that + * of **bpf_skb_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *skb*. + * + * The format of returned id and helper limitations are same as in + * **bpf_skb_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for UDP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_sk_release(void *sock) + * Description + * Release the reference held by *sock*. *sock* must be a + * non-**NULL** pointer that was returned from + * **bpf_sk_lookup_xxx**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) + * Description + * Push an element *value* in *map*. *flags* is one of: + * + * **BPF_EXIST** + * If the queue/stack is full, the oldest element is + * removed to make room for this. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_pop_elem(struct bpf_map *map, void *value) + * Description + * Pop an element from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_peek_elem(struct bpf_map *map, void *value) + * Description + * Get an element from *map* without removing it. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * For socket policies, insert *len* bytes into *msg* at offset + * *start*. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it may want to insert metadata or options into the *msg*. + * This can later be read and used by any of the lower layer BPF + * hooks. + * + * This helper may fail if under memory pressure (a malloc + * fails) in these cases BPF programs will get an appropriate + * error and BPF programs will need to handle them. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * Will remove *len* bytes from a *msg* starting at byte *start*. + * This may result in **ENOMEM** errors under certain situations if + * an allocation and copy are required due to a full ring buffer. + * However, the helper will try to avoid doing the allocation + * if possible. Other errors can occur if input parameters are + * invalid either due to *start* byte not being valid part of *msg* + * payload and/or *pop* value being to large. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded pointer movement. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_spin_lock(struct bpf_spin_lock *lock) + * Description + * Acquire a spinlock represented by the pointer *lock*, which is + * stored as part of a value of a map. Taking the lock allows to + * safely update the rest of the fields in that value. The + * spinlock can (and must) later be released with a call to + * **bpf_spin_unlock**\ (\ *lock*\ ). + * + * Spinlocks in BPF programs come with a number of restrictions + * and constraints: + * + * * **bpf_spin_lock** objects are only allowed inside maps of + * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this + * list could be extended in the future). + * * BTF description of the map is mandatory. + * * The BPF program can take ONE lock at a time, since taking two + * or more could cause dead locks. + * * Only one **struct bpf_spin_lock** is allowed per map element. + * * When the lock is taken, calls (either BPF to BPF or helpers) + * are not allowed. + * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not + * allowed inside a spinlock-ed region. + * * The BPF program MUST call **bpf_spin_unlock**\ () to release + * the lock, on all execution paths, before it returns. + * * The BPF program can access **struct bpf_spin_lock** only via + * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () + * helpers. Loading or storing data into the **struct + * bpf_spin_lock** *lock*\ **;** field of a map is not allowed. + * * To use the **bpf_spin_lock**\ () helper, the BTF description + * of the map value must be a struct and have **struct + * bpf_spin_lock** *anyname*\ **;** field at the top level. + * Nested lock inside another struct is not allowed. + * * The **struct bpf_spin_lock** *lock* field in a map value must + * be aligned on a multiple of 4 bytes in that value. + * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy + * the **bpf_spin_lock** field to user space. + * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from + * a BPF program, do not update the **bpf_spin_lock** field. + * * **bpf_spin_lock** cannot be on the stack or inside a + * networking packet (it can only be inside of a map values). + * * **bpf_spin_lock** is available to root only. + * * Tracing programs and socket filter programs cannot use + * **bpf_spin_lock**\ () due to insufficient preemption checks + * (but this may change in the future). + * * **bpf_spin_lock** is not allowed in inner maps of map-in-map. + * Return + * 0 + * + * long bpf_spin_unlock(struct bpf_spin_lock *lock) + * Description + * Release the *lock* previously locked by a call to + * **bpf_spin_lock**\ (\ *lock*\ ). + * Return + * 0 + * + * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_sock** pointer such + * that all the fields in this **bpf_sock** can be accessed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_tcp_sock** pointer from a + * **struct bpf_sock** pointer. + * Return + * A **struct bpf_tcp_sock** pointer on success, or **NULL** in + * case of failure. + * + * long bpf_skb_ecn_set_ce(struct sk_buff *skb) + * Description + * Set ECN (Explicit Congestion Notification) field of IP header + * to **CE** (Congestion Encountered) if current value is **ECT** + * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 + * and IPv4. + * Return + * 1 if the **CE** flag is set (either by the current helper call + * or because it was already present), 0 if it is not set. + * + * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) + * Description + * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. + * **bpf_sk_release**\ () is unnecessary and not allowed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ipv6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * *sk* is a kernel **struct sock** pointer for LSM program. + * *sk* is a **struct bpf_sock** pointer for other program types. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * long bpf_sk_storage_delete(struct bpf_map *map, void *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. + * **-EINVAL** if sk is not a fullsock (e.g. a request_sock). + * + * long bpf_send_signal(u32 sig) + * Description + * Send signal *sig* to the process of the current task. + * The signal may be delivered to any of this process's threads. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ipv6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header with options (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** SYN cookie cannot be issued due to error + * + * **-ENOENT** SYN cookie should not be issued (no SYN flood) + * + * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies + * + * **-EPROTONOSUPPORT** IP packet version is not 4 or 6 + * + * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct sk_buff. + * + * This helper is similar to **bpf_perf_event_output**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from user space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from kernel space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe user address + * *unsafe_ptr* to *dst*. The *size* should include the + * terminating NUL byte. In case the string length is smaller than + * *size*, the target is not padded with further NUL bytes. If the + * string length is larger than *size*, just *size*-1 bytes are + * copied and the last byte is set to NUL. + * + * On success, returns the number of bytes that were written, + * including the terminal NUL. This makes this helper useful in + * tracing programs for reading strings, and more importantly to + * get its length at runtime. See the following snippet: + * + * :: + * + * SEC("kprobe/sys_open") + * void bpf_sys_open(struct pt_regs *ctx) + * { + * char buf[PATHLEN]; // PATHLEN is defined to 256 + * int res = bpf_probe_read_user_str(buf, sizeof(buf), + * ctx->di); + * + * // Consume buf, for example push it to + * // userspace via bpf_perf_event_output(); we + * // can use res (the string length) as event + * // size, after checking its boundaries. + * } + * + * In comparison, using **bpf_probe_read_user**\ () helper here + * instead to read the string would require to estimate the length + * at compile time, and would often result in copying more memory + * than necessary. + * + * Another useful use case is when parsing individual process + * arguments or individual environment variables navigating + * *current*\ **->mm->arg_start** and *current*\ + * **->mm->env_start**: using this helper and the return value, + * one can quickly iterate at the right offset of the memory area. + * Return + * On success, the strictly positive length of the output string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* + * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. + * Return + * On success, the strictly positive length of the string, including + * the trailing NUL character. On error, a negative value. + * + * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt) + * Description + * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. + * *rcv_nxt* is the ack_seq to be sent out. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_send_signal_thread(u32 sig) + * Description + * Send signal *sig* to the thread corresponding to the current task. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * u64 bpf_jiffies64(void) + * Description + * Obtain the 64bit jiffies + * Return + * The 64 bit jiffies + * + * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) + * Description + * For an eBPF program attached to a perf event, retrieve the + * branch records (**struct perf_branch_entry**) associated to *ctx* + * and store it in the buffer pointed by *buf* up to size + * *size* bytes. + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to + * instead return the number of bytes required to store all the + * branch entries. If this flag is set, *buf* may be NULL. + * + * **-EINVAL** if arguments invalid or **size** not a multiple + * of **sizeof**\ (**struct perf_branch_entry**\ ). + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size) + * Description + * Returns 0 on success, values for *pid* and *tgid* as seen from the current + * *namespace* will be returned in *nsdata*. + * Return + * 0 on success, or one of the following in case of failure: + * + * **-EINVAL** if dev and inum supplied don't match dev_t and inode number + * with nsfs of current task, or if dev conversion to dev_t lost high bits. + * + * **-ENOENT** if pidns does not exists for the current task. + * + * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct xdp_buff. + * + * This helper is similar to **bpf_perf_eventoutput**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_get_netns_cookie(void *ctx) + * Description + * Retrieve the cookie (generated by the kernel) of the network + * namespace the input *ctx* is associated with. The network + * namespace cookie remains stable for its lifetime and provides + * a global identifier that can be assumed unique. If *ctx* is + * NULL, then the helper returns the cookie for the initial + * network namespace. The cookie itself is very similar to that + * of **bpf_get_socket_cookie**\ () helper, but for network + * namespaces instead of sockets. + * Return + * A 8-byte long opaque number. + * + * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of the cgroup associated + * with the current task at the *ancestor_level*. The root cgroup + * is at *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with the current task, then return value will be the + * same as that of **bpf_get_current_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with the current task. + * + * The format of returned id and helper limitations are same as in + * **bpf_get_current_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SCHED_CLS** and + * **BPF_PROG_TYPE_SCHED_ACT** programs. + * + * Assign the *sk* to the *skb*. When combined with appropriate + * routing configuration to receive the packet towards the socket, + * will cause *skb* to be delivered to the specified socket. + * Subsequent redirection of *skb* via **bpf_redirect**\ (), + * **bpf_clone_redirect**\ () or other methods outside of BPF may + * interfere with successful delivery to the socket. + * + * This operation is only valid from TC ingress path. + * + * The *flags* argument must be zero. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EINVAL** if specified *flags* are not supported. + * + * **-ENOENT** if the socket is unavailable for assignment. + * + * **-ENETUNREACH** if the socket is unreachable (wrong netns). + * + * **-EOPNOTSUPP** if the operation is not supported, for example + * a call from outside of TC ingress. + * + * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs. + * + * Select the *sk* as a result of a socket lookup. + * + * For the operation to succeed passed socket must be compatible + * with the packet description provided by the *ctx* object. + * + * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must + * be an exact match. While IP family (**AF_INET** or + * **AF_INET6**) must be compatible, that is IPv6 sockets + * that are not v6-only can be selected for IPv4 packets. + * + * Only TCP listeners and UDP unconnected sockets can be + * selected. *sk* can also be NULL to reset any previous + * selection. + * + * *flags* argument can combination of following values: + * + * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous + * socket selection, potentially done by a BPF program + * that ran before us. + * + * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip + * load-balancing within reuseport group for the socket + * being selected. + * + * On success *ctx->sk* will point to the selected socket. + * + * Return + * 0 on success, or a negative errno in case of failure. + * + * * **-EAFNOSUPPORT** if socket family (*sk->family*) is + * not compatible with packet family (*ctx->family*). + * + * * **-EEXIST** if socket has been already selected, + * potentially by another program, and + * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified. + * + * * **-EINVAL** if unsupported flags were specified. + * + * * **-EPROTOTYPE** if socket L4 protocol + * (*sk->protocol*) doesn't match packet protocol + * (*ctx->protocol*). + * + * * **-ESOCKTNOSUPPORT** if socket is not in allowed + * state (TCP listening or UDP unconnected). + * + * u64 bpf_ktime_get_boot_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does include the time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_BOOTTIME**) + * Return + * Current *ktime*. + * + * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print + * out the format string. + * The *m* represents the seq_file. The *fmt* and *fmt_size* are for + * the format string itself. The *data* and *data_len* are format string + * arguments. The *data* are a **u64** array and corresponding format string + * values are stored in the array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* array. + * The *data_len* is the size of *data* in bytes - must be a multiple of 8. + * + * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. + * Reading kernel memory may fail due to either invalid address or + * valid address but requiring a major memory fault. If reading kernel memory + * fails, the string for **%s** will be an empty string, and the ip + * address for **%p{i,I}{4,6}** will be 0. Not returning error to + * bpf program is consistent with what **bpf_trace_printk**\ () does for now. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EBUSY** if per-CPU memory copy buffer is busy, can try again + * by returning 1 from bpf program. + * + * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. + * + * **-E2BIG** if *fmt* contains too many format specifiers. + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * long bpf_seq_write(struct seq_file *m, const void *data, u32 len) + * Description + * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. + * The *m* represents the seq_file. The *data* and *len* represent the + * data to write in bytes. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * u64 bpf_sk_cgroup_id(void *sk) + * Description + * Return the cgroup v2 id of the socket *sk*. + * + * *sk* must be a non-**NULL** pointer to a socket, e.g. one + * returned from **bpf_sk_lookup_xxx**\ (), + * **bpf_sk_fullsock**\ (), etc. The format of returned id is + * same as in **bpf_skb_cgroup_id**\ (). + * + * This helper is available only if the kernel was compiled with + * the **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *sk* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *sk*, then return value will be same as that + * of **bpf_sk_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *sk*. + * + * The format of returned id and helper limitations are same as in + * **bpf_sk_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * Description + * Copy *size* bytes from *data* into a ring buffer *ringbuf*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * An adaptive notification is a notification sent whenever the user-space + * process has caught up and consumed all available payloads. In case the user-space + * process is still processing a previous payload, then no notification is needed + * as it will process the newly added payload automatically. + * Return + * 0 on success, or a negative error in case of failure. + * + * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf*. + * *flags* must be 0. + * Return + * Valid pointer with *size* bytes of memory available; NULL, + * otherwise. + * + * void bpf_ringbuf_submit(void *data, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard(void *data, u64 flags) + * Description + * Discard reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. + * Return + * Nothing. Always succeeds. + * + * u64 bpf_ringbuf_query(void *ringbuf, u64 flags) + * Description + * Query various characteristics of provided ring buffer. What + * exactly is queries is determined by *flags*: + * + * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed. + * * **BPF_RB_RING_SIZE**: The size of ring buffer. + * * **BPF_RB_CONS_POS**: Consumer position (can wrap around). + * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around). + * + * Data returned is just a momentary snapshot of actual values + * and could be inaccurate, so this facility should be used to + * power heuristics and for reporting, not to make 100% correct + * calculation. + * Return + * Requested value, or 0, if *flags* are not recognized. + * + * long bpf_csum_level(struct sk_buff *skb, u64 level) + * Description + * Change the skbs checksum level by one layer up or down, or + * reset it entirely to none in order to have the stack perform + * checksum validation. The level is applicable to the following + * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of + * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | + * through **bpf_skb_adjust_room**\ () helper with passing in + * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call + * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since + * the UDP header is removed. Similarly, an encap of the latter + * into the former could be accompanied by a helper call to + * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the + * skb is still intended to be processed in higher layers of the + * stack instead of just egressing at tc. + * + * There are three supported level settings at this time: + * + * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and + * sets CHECKSUM_NONE to force checksum validation by the stack. + * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current + * skb->csum_level. + * Return + * 0 on success, or a negative error in case of failure. In the + * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level + * is returned or the error code -EACCES in case the skb is not + * subject to CHECKSUM_UNNECESSARY. + * + * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *udp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * Note: the user stack will only be populated if the *task* is + * the current task; all other tasks will return -EOPNOTSUPP. + * To achieve this, the helper needs *task*, which is a valid + * pointer to **struct task_struct**. To store the stacktrace, the + * bpf program provides *buf* with a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * The *task* must be the current task. + * **BPF_F_USER_BUILD_ID** + * Collect buildid+offset instead of ips for user stack, + * only valid if **BPF_F_USER_STACK** is also specified. + * + * **bpf_get_task_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. + * + * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) + * Description + * Load header option. Support reading a particular TCP header + * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). + * + * If *flags* is 0, it will search the option from the + * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** + * has details on what skb_data contains under different + * *skops*\ **->op**. + * + * The first byte of the *searchby_res* specifies the + * kind that it wants to search. + * + * If the searching kind is an experimental kind + * (i.e. 253 or 254 according to RFC6994). It also + * needs to specify the "magic" which is either + * 2 bytes or 4 bytes. It then also needs to + * specify the size of the magic by using + * the 2nd byte which is "kind-length" of a TCP + * header option and the "kind-length" also + * includes the first 2 bytes "kind" and "kind-length" + * itself as a normal TCP header option also does. + * + * For example, to search experimental kind 254 with + * 2 byte magic 0xeB9F, the searchby_res should be + * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. + * + * To search for the standard window scale option (3), + * the *searchby_res* should be [ 3, 0, 0, .... 0 ]. + * Note, kind-length must be 0 for regular option. + * + * Searching for No-Op (0) and End-of-Option-List (1) are + * not supported. + * + * *len* must be at least 2 bytes which is the minimal size + * of a header option. + * + * Supported flags: + * + * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the + * saved_syn packet or the just-received syn packet. + * + * Return + * > 0 when found, the header option is copied to *searchby_res*. + * The return value is the total length copied. On failure, a + * negative error code is returned: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOMSG** if the option is not found. + * + * **-ENOENT** if no syn packet is available when + * **BPF_LOAD_HDR_OPT_TCP_SYN** is used. + * + * **-ENOSPC** if there is not enough space. Only *len* number of + * bytes are copied. + * + * **-EFAULT** on failure to parse the header options in the + * packet. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) + * Description + * Store header option. The data will be copied + * from buffer *from* with length *len* to the TCP header. + * + * The buffer *from* should have the whole option that + * includes the kind, kind-length, and the actual + * option data. The *len* must be at least kind-length + * long. The kind-length does not have to be 4 byte + * aligned. The kernel will take care of the padding + * and setting the 4 bytes aligned value to th->doff. + * + * This helper will check for duplicated option + * by searching the same option in the outgoing skb. + * + * This helper can only be called during + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** If param is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * Nothing has been written + * + * **-EEXIST** if the option already exists. + * + * **-EFAULT** on failure to parse the existing header options. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * Description + * Reserve *len* bytes for the bpf header option. The + * space will be used by **bpf_store_hdr_opt**\ () later in + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * If **bpf_reserve_hdr_opt**\ () is called multiple times, + * the total number of bytes will be reserved. + * + * This helper can only be called during + * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * Description + * Get a bpf_local_storage from an *inode*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *inode* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this + * helper enforces the key must be an inode and the map must also + * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * + * Underneath, the value is stored locally at *inode* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *inode*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * Description + * Delete a bpf_local_storage from an *inode*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * long bpf_d_path(struct path *path, char *buf, u32 sz) + * Description + * Return full path for given **struct path** object, which + * needs to be the kernel BTF *path* object. The path is + * returned in the provided buffer *buf* of size *sz* and + * is zero terminated. + * + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) + * Description + * Read *size* bytes from user space address *user_ptr* and store + * the data in *dst*. This is a wrapper of **copy_from_user**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) + * Description + * Use BTF to store a string representation of *ptr*->ptr in *str*, + * using *ptr*->type_id. This value should specify the type + * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) + * can be used to look up vmlinux BTF type ids. Traversing the + * data structure using BTF, the type information and values are + * stored in the first *str_size* - 1 bytes of *str*. Safe copy of + * the pointer data is carried out to avoid kernel crashes during + * operation. Smaller types can use string space on the stack; + * larger programs can use map data to store the string + * representation. + * + * The string can be subsequently shared with userspace via + * bpf_perf_event_output() or ring buffer interfaces. + * bpf_trace_printk() is to be avoided as it places too small + * a limit on string size to be useful. + * + * *flags* is a combination of + * + * **BTF_F_COMPACT** + * no formatting around type information + * **BTF_F_NONAME** + * no struct/union member names/types + * **BTF_F_PTR_RAW** + * show raw (unobfuscated) pointer values; + * equivalent to printk specifier %px. + * **BTF_F_ZERO** + * show zero-valued struct/union members; they + * are not displayed by default + * + * Return + * The number of bytes that were written (or would have been + * written if output had to be truncated due to string size), + * or a negative error in cases of failure. + * + * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) + * Description + * Use BTF to write to seq_write a string representation of + * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). + * *flags* are identical to those used for bpf_snprintf_btf. + * Return + * 0 on success or a negative error in case of failure. + * + * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) + * Description + * See **bpf_get_cgroup_classid**\ () for the main description. + * This helper differs from **bpf_get_cgroup_classid**\ () in that + * the cgroup v1 net_cls class is retrieved only from the *skb*'s + * associated socket instead of the current process. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex* + * and fill in L2 addresses from neighboring subsystem. This helper + * is somewhat similar to **bpf_redirect**\ (), except that it + * populates L2 addresses as well, meaning, internally, the helper + * relies on the neighbor lookup for the L2 address of the nexthop. + * + * The helper will perform a FIB lookup based on the skb's + * networking header to get the address of the next hop, unless + * this is supplied by the caller in the *params* argument. The + * *plen* argument indicates the len of *params* and should be set + * to 0 if *params* is NULL. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types, and enabled + * for IPv4 and IPv6 protocols. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on *cpu*. A ksym is an + * extern variable decorated with '__ksym'. For ksym, there is a + * global var (either static or global) defined of the same name + * in the kernel. The ksym is percpu if the global var is percpu. + * The returned pointer points to the global percpu var on *cpu*. + * + * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the + * kernel, except that bpf_per_cpu_ptr() may return NULL. This + * happens if *cpu* is larger than nr_cpu_ids. The caller of + * bpf_per_cpu_ptr() must check the returned value. + * Return + * A pointer pointing to the kernel percpu variable on *cpu*, or + * NULL, if *cpu* is invalid. + * + * void *bpf_this_cpu_ptr(const void *percpu_ptr) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on this cpu. See the + * description of 'ksym' in **bpf_per_cpu_ptr**\ (). + * + * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in + * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would + * never return NULL. + * Return + * A pointer pointing to the kernel percpu variable on this cpu. + * + * long bpf_redirect_peer(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_redirect**\ (), except + * that the redirection happens to the *ifindex*' peer device and + * the netns switch takes place from ingress to ingress without + * going through the CPU's backlog queue. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types at the ingress + * hook and for veth device types. The peer device must reside in a + * different network namespace. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *task*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *task* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this + * helper enforces the key must be a task_struct and the map must also + * be a **BPF_MAP_TYPE_TASK_STORAGE**. + * + * Underneath, the value is stored locally at *task* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *task*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) + * Description + * Delete a bpf_local_storage from a *task*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * struct task_struct *bpf_get_current_task_btf(void) + * Description + * Return a BTF pointer to the "current" task. + * This pointer can also be used in helpers that accept an + * *ARG_PTR_TO_BTF_ID* of type *task_struct*. + * Return + * Pointer to the current task. + * + * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) + * Description + * Set or clear certain options on *bprm*: + * + * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit + * which sets the **AT_SECURE** auxv for glibc. The bit + * is cleared if the flag is not specified. + * Return + * **-EINVAL** if invalid *flags* are passed, zero otherwise. + * + * u64 bpf_ktime_get_coarse_ns(void) + * Description + * Return a coarse-grained version of the time elapsed since + * system boot, in nanoseconds. Does not include time the system + * was suspended. + * + * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) + * Return + * Current *ktime*. + * + * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) + * Description + * Returns the stored IMA hash of the *inode* (if it's available). + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * invalid arguments are passed. + * + * struct socket *bpf_sock_from_file(struct file *file) + * Description + * If the given file represents a socket, returns the associated + * socket. + * Return + * A pointer to a struct socket on success or NULL if the file is + * not a socket. + * + * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) + * Description + * Check packet size against exceeding MTU of net device (based + * on *ifindex*). This helper will likely be used in combination + * with helpers that adjust/change the packet size. + * + * The argument *len_diff* can be used for querying with a planned + * size change. This allows to check MTU prior to changing packet + * ctx. Providing a *len_diff* adjustment that is larger than the + * actual packet size (resulting in negative packet size) will in + * principle not exceed the MTU, which is why it is not considered + * a failure. Other BPF helpers are needed for performing the + * planned size change; therefore the responsibility for catching + * a negative packet size belongs in those helpers. + * + * Specifying *ifindex* zero means the MTU check is performed + * against the current net device. This is practical if this isn't + * used prior to redirect. + * + * On input *mtu_len* must be a valid pointer, else verifier will + * reject BPF program. If the value *mtu_len* is initialized to + * zero then the ctx packet size is use. When value *mtu_len* is + * provided as input this specify the L3 length that the MTU check + * is done against. Remember XDP and TC length operate at L2, but + * this value is L3 as this correlate to MTU and IP-header tot_len + * values which are L3 (similar behavior as bpf_fib_lookup). + * + * The Linux kernel route table can configure MTUs on a more + * specific per route level, which is not provided by this helper. + * For route level MTU checks use the **bpf_fib_lookup**\ () + * helper. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** for tc cls_act programs. + * + * The *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_MTU_CHK_SEGS** + * This flag will only works for *ctx* **struct sk_buff**. + * If packet context contains extra packet segment buffers + * (often knows as GSO skb), then MTU check is harder to + * check at this point, because in transmit path it is + * possible for the skb packet to get re-segmented + * (depending on net device features). This could still be + * a MTU violation, so this flag enables performing MTU + * check against segments, with a different violation + * return code to tell it apart. Check cannot use len_diff. + * + * On return *mtu_len* pointer contains the MTU value of the net + * device. Remember the net device configured MTU is the L3 size, + * which is returned here and XDP and TC length operate at L2. + * Helper take this into account for you, but remember when using + * MTU value in your BPF-code. + * + * Return + * * 0 on success, and populate MTU value in *mtu_len* pointer. + * + * * < 0 if any input argument is invalid (*mtu_len* not updated) + * + * MTU violations return positive values, but also populate MTU + * value in *mtu_len* pointer, as this can be needed for + * implementing PMTU handing: + * + * * **BPF_MTU_CHK_RET_FRAG_NEEDED** + * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** + * + * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For each element in **map**, call **callback_fn** function with + * **map**, **callback_ctx** and other map-specific parameters. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. + * + * The following are a list of supported map types and their + * respective expected callback signatures: + * + * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, + * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, + * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY + * + * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); + * + * For per_cpu maps, the map_value is the value on the cpu where the + * bpf_prog is running. + * + * If **callback_fn** return 0, the helper will continue to the next + * element. If return value is 1, the helper will skip the rest of + * elements and return. Other return values are not used now. + * + * Return + * The number of traversed map elements for success, **-EINVAL** for + * invalid **flags**. + * + * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len) + * Description + * Outputs a string into the **str** buffer of size **str_size** + * based on a format string stored in a read-only map pointed by + * **fmt**. + * + * Each format specifier in **fmt** corresponds to one u64 element + * in the **data** array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* + * array. The *data_len* is the size of *data* in bytes - must be + * a multiple of 8. + * + * Formats **%s** and **%p{i,I}{4,6}** require to read kernel + * memory. Reading kernel memory may fail due to either invalid + * address or valid address but requiring a major memory fault. If + * reading kernel memory fails, the string for **%s** will be an + * empty string, and the ip address for **%p{i,I}{4,6}** will be 0. + * Not returning error to bpf program is consistent with what + * **bpf_trace_printk**\ () does for now. + * + * Return + * The strictly positive length of the formatted string, including + * the trailing zero character. If the return value is greater than + * **str_size**, **str** contains a truncated string, guaranteed to + * be zero-terminated except when **str_size** is 0. + * + * Or **-EBUSY** if the per-CPU memory copy buffer is busy. + * + * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size) + * Description + * Execute bpf syscall with given arguments. + * Return + * A syscall result. + * + * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags) + * Description + * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs. + * Return + * Returns btf_id and btf_obj_fd in lower and upper 32 bits. + * + * long bpf_sys_close(u32 fd) + * Description + * Execute close syscall for given FD. + * Return + * A syscall result. + * + * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags) + * Description + * Initialize the timer. + * First 4 bits of *flags* specify clockid. + * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. + * All other bits of *flags* are reserved. + * The verifier will reject the program if *timer* is not from + * the same *map*. + * Return + * 0 on success. + * **-EBUSY** if *timer* is already initialized. + * **-EINVAL** if invalid *flags* are passed. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn) + * Description + * Configure the timer to call *callback_fn* static function. + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags) + * Description + * Set timer expiration N nanoseconds from the current time. The + * configured callback will be invoked in soft irq context on some cpu + * and will not repeat unless another bpf_timer_start() is made. + * In such case the next invocation can migrate to a different cpu. + * Since struct bpf_timer is a field inside map element the map + * owns the timer. The bpf_timer_set_callback() will increment refcnt + * of BPF program to make sure that callback_fn code stays valid. + * When user space reference to a map reaches zero all timers + * in a map are cancelled and corresponding program's refcnts are + * decremented. This is done to make sure that Ctrl-C of a user + * process doesn't leave any timers running. If map is pinned in + * bpffs the callback_fn can re-arm itself indefinitely. + * bpf_map_update/delete_elem() helpers and user space sys_bpf commands + * cancel and free the timer in the given map element. + * The map can contain timers that invoke callback_fn-s from different + * programs. The same callback_fn can serve different timers from + * different maps if key/value layout matches across maps. + * Every bpf_timer_set_callback() can have different callback_fn. + * + * *flags* can be one of: + * + * **BPF_F_TIMER_ABS** + * Start the timer in absolute expire value instead of the + * default relative one. + * **BPF_F_TIMER_CPU_PIN** + * Timer will be pinned to the CPU of the caller. + * + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier + * or invalid *flags* are passed. + * + * long bpf_timer_cancel(struct bpf_timer *timer) + * Description + * Cancel the timer and wait for callback_fn to finish if it was running. + * Return + * 0 if the timer was not active. + * 1 if the timer was active. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its + * own timer which would have led to a deadlock otherwise. + * + * u64 bpf_get_func_ip(void *ctx) + * Description + * Get address of the traced function (for tracing and kprobe programs). + * + * When called for kprobe program attached as uprobe it returns + * probe address for both entry and return uprobe. + * + * Return + * Address of the traced function for kprobe. + * 0 for kprobes placed within the function (not at the entry). + * Address of the probe for uprobe and return uprobe. + * + * u64 bpf_get_attach_cookie(void *ctx) + * Description + * Get bpf_cookie value provided (optionally) during the program + * attachment. It might be different for each individual + * attachment, even if BPF program itself is the same. + * Expects BPF program context *ctx* as a first argument. + * + * Supported for the following program types: + * - kprobe/uprobe; + * - tracepoint; + * - perf_event. + * Return + * Value specified by user at BPF link creation/attachment time + * or 0, if it was not specified. + * + * long bpf_task_pt_regs(struct task_struct *task) + * Description + * Get the struct pt_regs associated with **task**. + * Return + * A pointer to struct pt_regs. + * + * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags) + * Description + * Get branch trace from hardware engines like Intel LBR. The + * hardware engine is stopped shortly after the helper is + * called. Therefore, the user need to filter branch entries + * based on the actual use case. To capture branch trace + * before the trigger point of the BPF program, the helper + * should be called at the beginning of the BPF program. + * + * The data is stored as struct perf_branch_entry into output + * buffer *entries*. *size* is the size of *entries* in bytes. + * *flags* is reserved for now and must be zero. + * + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64 + * to format and can handle more format args as a result. + * + * Arguments are to be used as in **bpf_seq_printf**\ () helper. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * struct unix_sock *bpf_skc_to_unix_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *unix_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res) + * Description + * Get the address of a kernel symbol, returned in *res*. *res* is + * set to 0 if the symbol is not found. + * Return + * On success, zero. On error, a negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-EINVAL** if string *name* is not the same size as *name_sz*. + * + * **-ENOENT** if symbol is not found. + * + * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u32 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument register (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= argument register count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of registers of the traced function (for tracing programs) where + * function arguments are stored in these registers. + * + * Return + * The number of argument registers of the traced function. + * + * int bpf_get_retval(void) + * Description + * Get the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * Return + * The BPF program's return value. + * + * int bpf_set_retval(int retval) + * Description + * Set the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * + * Note that there is the following corner case where the program exports an error + * via bpf_set_retval but signals success via 'return 1': + * + * bpf_set_retval(-EPERM); + * return 1; + * + * In this case, the BPF program's return value will use helper's -EPERM. This + * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. + * + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) + * Description + * Get the total size of a given xdp buff (linear and paged area) + * Return + * The total size of a given xdp buffer. + * + * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * This helper is provided as an easy way to load data from a + * xdp buffer. It can be used to load *len* bytes from *offset* from + * the frame associated to *xdp_md*, into the buffer pointed by + * *buf*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * Store *len* bytes from buffer *buf* into the frame + * associated to *xdp_md*, at *offset*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) + * Description + * Read *size* bytes from user space address *user_ptr* in *tsk*'s + * address space, and stores the data in *dst*. *flags* is not + * used yet and is provided for future extensibility. This helper + * can only be used by sleepable programs. + * Return + * 0 on success, or a negative error in case of failure. On error + * *dst* buffer is zeroed out. + * + * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) + * Description + * Change the __sk_buff->tstamp_type to *tstamp_type* + * and set *tstamp* to the __sk_buff->tstamp together. + * + * If there is no need to change the __sk_buff->tstamp_type, + * the tstamp value can be directly written to __sk_buff->tstamp + * instead. + * + * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that + * will be kept during bpf_redirect_*(). A non zero + * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO + * *tstamp_type*. + * + * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used + * with a zero *tstamp*. + * + * Only IPv4 and IPv6 skb->protocol are supported. + * + * This function is most useful when it needs to set a + * mono delivery time to __sk_buff->tstamp and then + * bpf_redirect_*() to the egress of an iface. For example, + * changing the (rcv) timestamp in __sk_buff->tstamp at + * ingress to a mono delivery time and then bpf_redirect_*() + * to sch_fq@phy-dev. + * Return + * 0 on success. + * **-EINVAL** for invalid input + * **-EOPNOTSUPP** for unsupported protocol + * + * long bpf_ima_file_hash(struct file *file, void *dst, u32 size) + * Description + * Returns a calculated IMA hash of the *file*. + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * invalid arguments are passed. + * + * void *bpf_kptr_xchg(void *map_value, void *ptr) + * Description + * Exchange kptr at pointer *map_value* with *ptr*, and return the + * old value. *ptr* can be NULL, otherwise it must be a referenced + * pointer which will be released when this helper is called. + * Return + * The old value of kptr (which can be NULL). The returned pointer + * if not NULL, is a reference which must be released using its + * corresponding release function, or moved into a BPF map before + * program exit. + * + * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + * Description + * Perform a lookup in *percpu map* for an entry associated to + * *key* on *cpu*. + * Return + * Map value associated to *key* on *cpu*, or **NULL** if no entry + * was found or *cpu* is invalid. + * + * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Get a dynptr to local memory *data*. + * + * *data* must be a ptr to a map value. + * The maximum *size* supported is DYNPTR_MAX_SIZE. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, + * -EINVAL if flags is not 0. + * + * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf* + * through the dynptr interface. *flags* must be 0. + * + * Please note that a corresponding bpf_ringbuf_submit_dynptr or + * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the + * reservation fails. This is enforced by the verifier. + * Return + * 0 on success, or a negative error in case of failure. + * + * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*, + * through the dynptr interface. This is a no-op if the dynptr is + * invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_submit'. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Discard reserved ring buffer sample through the dynptr + * interface. This is a no-op if the dynptr is invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_discard'. + * Return + * Nothing. Always succeeds. + * + * long bpf_dynptr_read(void *dst, u32 len, const struct bpf_dynptr *src, u32 offset, u64 flags) + * Description + * Read *len* bytes from *src* into *dst*, starting from *offset* + * into *src*. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if + * *flags* is not 0. + * + * long bpf_dynptr_write(const struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags) + * Description + * Write *len* bytes from *src* into *dst*, starting from *offset* + * into *dst*. + * + * *flags* must be 0 except for skb-type dynptrs. + * + * For skb-type dynptrs: + * * All data slices of the dynptr are automatically + * invalidated after **bpf_dynptr_write**\ (). This is + * because writing may pull the skb and change the + * underlying packet buffer. + * + * * For *flags*, please see the flags accepted by + * **bpf_skb_store_bytes**\ (). + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* + * is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs, + * other errors correspond to errors returned by **bpf_skb_store_bytes**\ (). + * + * void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u32 offset, u32 len) + * Description + * Get a pointer to the underlying dynptr data. + * + * *len* must be a statically known value. The returned data slice + * is invalidated whenever the dynptr is invalidated. + * + * skb and xdp type dynptrs may not use bpf_dynptr_data. They should + * instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr. + * Return + * Pointer to the underlying dynptr data, NULL if the dynptr is + * read-only, if the dynptr is invalid, or if the offset and length + * is out of bounds. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv4/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv6/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * u64 bpf_ktime_get_tai_ns(void) + * Description + * A nonsettable system-wide clock derived from wall-clock time but + * ignoring leap seconds. This clock does not experience + * discontinuities and backwards jumps caused by NTP inserting leap + * seconds as CLOCK_REALTIME does. + * + * See: **clock_gettime**\ (**CLOCK_TAI**) + * Return + * Current *ktime*. + * + * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) + * Description + * Drain samples from the specified user ring buffer, and invoke + * the provided callback for each such sample: + * + * long (\*callback_fn)(const struct bpf_dynptr \*dynptr, void \*ctx); + * + * If **callback_fn** returns 0, the helper will continue to try + * and drain the next sample, up to a maximum of + * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1, + * the helper will skip the rest of the samples and return. Other + * return values are not used now, and will be rejected by the + * verifier. + * Return + * The number of drained samples if no error was encountered while + * draining samples, or 0 if no samples were present in the ring + * buffer. If a user-space producer was epoll-waiting on this map, + * and at least one sample was drained, they will receive an event + * notification notifying them of available space in the ring + * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this + * function, no wakeup notification will be sent. If the + * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will + * be sent even if no sample was drained. + * + * On failure, the returned value is one of the following: + * + * **-EBUSY** if the ring buffer is contended, and another calling + * context was concurrently draining the ring buffer. + * + * **-EINVAL** if user-space is not properly tracking the ring + * buffer due to the producer position not being aligned to 8 + * bytes, a sample not being aligned to 8 bytes, or the producer + * position not matching the advertised length of a sample. + * + * **-E2BIG** if user-space has tried to publish a sample which is + * larger than the size of the ring buffer, or which cannot fit + * within a struct bpf_dynptr. + * + * void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *cgroup*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *cgroup* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *cgroup*) except this + * helper enforces the key must be a cgroup struct and the map must also + * be a **BPF_MAP_TYPE_CGRP_STORAGE**. + * + * In reality, the local-storage value is embedded directly inside of the + * *cgroup* object itself, rather than being located in the + * **BPF_MAP_TYPE_CGRP_STORAGE** map. When the local-storage value is + * queried for some *map* on a *cgroup* object, the kernel will perform an + * O(n) iteration over all of the live local-storage values for that + * *cgroup* object until the local-storage value for the *map* is found. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup) + * Description + * Delete a bpf_local_storage from a *cgroup*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + */ +#define ___BPF_FUNC_MAPPER(FN, ctx...) \ + FN(unspec, 0, ##ctx) \ + FN(map_lookup_elem, 1, ##ctx) \ + FN(map_update_elem, 2, ##ctx) \ + FN(map_delete_elem, 3, ##ctx) \ + FN(probe_read, 4, ##ctx) \ + FN(ktime_get_ns, 5, ##ctx) \ + FN(trace_printk, 6, ##ctx) \ + FN(get_prandom_u32, 7, ##ctx) \ + FN(get_smp_processor_id, 8, ##ctx) \ + FN(skb_store_bytes, 9, ##ctx) \ + FN(l3_csum_replace, 10, ##ctx) \ + FN(l4_csum_replace, 11, ##ctx) \ + FN(tail_call, 12, ##ctx) \ + FN(clone_redirect, 13, ##ctx) \ + FN(get_current_pid_tgid, 14, ##ctx) \ + FN(get_current_uid_gid, 15, ##ctx) \ + FN(get_current_comm, 16, ##ctx) \ + FN(get_cgroup_classid, 17, ##ctx) \ + FN(skb_vlan_push, 18, ##ctx) \ + FN(skb_vlan_pop, 19, ##ctx) \ + FN(skb_get_tunnel_key, 20, ##ctx) \ + FN(skb_set_tunnel_key, 21, ##ctx) \ + FN(perf_event_read, 22, ##ctx) \ + FN(redirect, 23, ##ctx) \ + FN(get_route_realm, 24, ##ctx) \ + FN(perf_event_output, 25, ##ctx) \ + FN(skb_load_bytes, 26, ##ctx) \ + FN(get_stackid, 27, ##ctx) \ + FN(csum_diff, 28, ##ctx) \ + FN(skb_get_tunnel_opt, 29, ##ctx) \ + FN(skb_set_tunnel_opt, 30, ##ctx) \ + FN(skb_change_proto, 31, ##ctx) \ + FN(skb_change_type, 32, ##ctx) \ + FN(skb_under_cgroup, 33, ##ctx) \ + FN(get_hash_recalc, 34, ##ctx) \ + FN(get_current_task, 35, ##ctx) \ + FN(probe_write_user, 36, ##ctx) \ + FN(current_task_under_cgroup, 37, ##ctx) \ + FN(skb_change_tail, 38, ##ctx) \ + FN(skb_pull_data, 39, ##ctx) \ + FN(csum_update, 40, ##ctx) \ + FN(set_hash_invalid, 41, ##ctx) \ + FN(get_numa_node_id, 42, ##ctx) \ + FN(skb_change_head, 43, ##ctx) \ + FN(xdp_adjust_head, 44, ##ctx) \ + FN(probe_read_str, 45, ##ctx) \ + FN(get_socket_cookie, 46, ##ctx) \ + FN(get_socket_uid, 47, ##ctx) \ + FN(set_hash, 48, ##ctx) \ + FN(setsockopt, 49, ##ctx) \ + FN(skb_adjust_room, 50, ##ctx) \ + FN(redirect_map, 51, ##ctx) \ + FN(sk_redirect_map, 52, ##ctx) \ + FN(sock_map_update, 53, ##ctx) \ + FN(xdp_adjust_meta, 54, ##ctx) \ + FN(perf_event_read_value, 55, ##ctx) \ + FN(perf_prog_read_value, 56, ##ctx) \ + FN(getsockopt, 57, ##ctx) \ + FN(override_return, 58, ##ctx) \ + FN(sock_ops_cb_flags_set, 59, ##ctx) \ + FN(msg_redirect_map, 60, ##ctx) \ + FN(msg_apply_bytes, 61, ##ctx) \ + FN(msg_cork_bytes, 62, ##ctx) \ + FN(msg_pull_data, 63, ##ctx) \ + FN(bind, 64, ##ctx) \ + FN(xdp_adjust_tail, 65, ##ctx) \ + FN(skb_get_xfrm_state, 66, ##ctx) \ + FN(get_stack, 67, ##ctx) \ + FN(skb_load_bytes_relative, 68, ##ctx) \ + FN(fib_lookup, 69, ##ctx) \ + FN(sock_hash_update, 70, ##ctx) \ + FN(msg_redirect_hash, 71, ##ctx) \ + FN(sk_redirect_hash, 72, ##ctx) \ + FN(lwt_push_encap, 73, ##ctx) \ + FN(lwt_seg6_store_bytes, 74, ##ctx) \ + FN(lwt_seg6_adjust_srh, 75, ##ctx) \ + FN(lwt_seg6_action, 76, ##ctx) \ + FN(rc_repeat, 77, ##ctx) \ + FN(rc_keydown, 78, ##ctx) \ + FN(skb_cgroup_id, 79, ##ctx) \ + FN(get_current_cgroup_id, 80, ##ctx) \ + FN(get_local_storage, 81, ##ctx) \ + FN(sk_select_reuseport, 82, ##ctx) \ + FN(skb_ancestor_cgroup_id, 83, ##ctx) \ + FN(sk_lookup_tcp, 84, ##ctx) \ + FN(sk_lookup_udp, 85, ##ctx) \ + FN(sk_release, 86, ##ctx) \ + FN(map_push_elem, 87, ##ctx) \ + FN(map_pop_elem, 88, ##ctx) \ + FN(map_peek_elem, 89, ##ctx) \ + FN(msg_push_data, 90, ##ctx) \ + FN(msg_pop_data, 91, ##ctx) \ + FN(rc_pointer_rel, 92, ##ctx) \ + FN(spin_lock, 93, ##ctx) \ + FN(spin_unlock, 94, ##ctx) \ + FN(sk_fullsock, 95, ##ctx) \ + FN(tcp_sock, 96, ##ctx) \ + FN(skb_ecn_set_ce, 97, ##ctx) \ + FN(get_listener_sock, 98, ##ctx) \ + FN(skc_lookup_tcp, 99, ##ctx) \ + FN(tcp_check_syncookie, 100, ##ctx) \ + FN(sysctl_get_name, 101, ##ctx) \ + FN(sysctl_get_current_value, 102, ##ctx) \ + FN(sysctl_get_new_value, 103, ##ctx) \ + FN(sysctl_set_new_value, 104, ##ctx) \ + FN(strtol, 105, ##ctx) \ + FN(strtoul, 106, ##ctx) \ + FN(sk_storage_get, 107, ##ctx) \ + FN(sk_storage_delete, 108, ##ctx) \ + FN(send_signal, 109, ##ctx) \ + FN(tcp_gen_syncookie, 110, ##ctx) \ + FN(skb_output, 111, ##ctx) \ + FN(probe_read_user, 112, ##ctx) \ + FN(probe_read_kernel, 113, ##ctx) \ + FN(probe_read_user_str, 114, ##ctx) \ + FN(probe_read_kernel_str, 115, ##ctx) \ + FN(tcp_send_ack, 116, ##ctx) \ + FN(send_signal_thread, 117, ##ctx) \ + FN(jiffies64, 118, ##ctx) \ + FN(read_branch_records, 119, ##ctx) \ + FN(get_ns_current_pid_tgid, 120, ##ctx) \ + FN(xdp_output, 121, ##ctx) \ + FN(get_netns_cookie, 122, ##ctx) \ + FN(get_current_ancestor_cgroup_id, 123, ##ctx) \ + FN(sk_assign, 124, ##ctx) \ + FN(ktime_get_boot_ns, 125, ##ctx) \ + FN(seq_printf, 126, ##ctx) \ + FN(seq_write, 127, ##ctx) \ + FN(sk_cgroup_id, 128, ##ctx) \ + FN(sk_ancestor_cgroup_id, 129, ##ctx) \ + FN(ringbuf_output, 130, ##ctx) \ + FN(ringbuf_reserve, 131, ##ctx) \ + FN(ringbuf_submit, 132, ##ctx) \ + FN(ringbuf_discard, 133, ##ctx) \ + FN(ringbuf_query, 134, ##ctx) \ + FN(csum_level, 135, ##ctx) \ + FN(skc_to_tcp6_sock, 136, ##ctx) \ + FN(skc_to_tcp_sock, 137, ##ctx) \ + FN(skc_to_tcp_timewait_sock, 138, ##ctx) \ + FN(skc_to_tcp_request_sock, 139, ##ctx) \ + FN(skc_to_udp6_sock, 140, ##ctx) \ + FN(get_task_stack, 141, ##ctx) \ + FN(load_hdr_opt, 142, ##ctx) \ + FN(store_hdr_opt, 143, ##ctx) \ + FN(reserve_hdr_opt, 144, ##ctx) \ + FN(inode_storage_get, 145, ##ctx) \ + FN(inode_storage_delete, 146, ##ctx) \ + FN(d_path, 147, ##ctx) \ + FN(copy_from_user, 148, ##ctx) \ + FN(snprintf_btf, 149, ##ctx) \ + FN(seq_printf_btf, 150, ##ctx) \ + FN(skb_cgroup_classid, 151, ##ctx) \ + FN(redirect_neigh, 152, ##ctx) \ + FN(per_cpu_ptr, 153, ##ctx) \ + FN(this_cpu_ptr, 154, ##ctx) \ + FN(redirect_peer, 155, ##ctx) \ + FN(task_storage_get, 156, ##ctx) \ + FN(task_storage_delete, 157, ##ctx) \ + FN(get_current_task_btf, 158, ##ctx) \ + FN(bprm_opts_set, 159, ##ctx) \ + FN(ktime_get_coarse_ns, 160, ##ctx) \ + FN(ima_inode_hash, 161, ##ctx) \ + FN(sock_from_file, 162, ##ctx) \ + FN(check_mtu, 163, ##ctx) \ + FN(for_each_map_elem, 164, ##ctx) \ + FN(snprintf, 165, ##ctx) \ + FN(sys_bpf, 166, ##ctx) \ + FN(btf_find_by_name_kind, 167, ##ctx) \ + FN(sys_close, 168, ##ctx) \ + FN(timer_init, 169, ##ctx) \ + FN(timer_set_callback, 170, ##ctx) \ + FN(timer_start, 171, ##ctx) \ + FN(timer_cancel, 172, ##ctx) \ + FN(get_func_ip, 173, ##ctx) \ + FN(get_attach_cookie, 174, ##ctx) \ + FN(task_pt_regs, 175, ##ctx) \ + FN(get_branch_snapshot, 176, ##ctx) \ + FN(trace_vprintk, 177, ##ctx) \ + FN(skc_to_unix_sock, 178, ##ctx) \ + FN(kallsyms_lookup_name, 179, ##ctx) \ + FN(find_vma, 180, ##ctx) \ + FN(loop, 181, ##ctx) \ + FN(strncmp, 182, ##ctx) \ + FN(get_func_arg, 183, ##ctx) \ + FN(get_func_ret, 184, ##ctx) \ + FN(get_func_arg_cnt, 185, ##ctx) \ + FN(get_retval, 186, ##ctx) \ + FN(set_retval, 187, ##ctx) \ + FN(xdp_get_buff_len, 188, ##ctx) \ + FN(xdp_load_bytes, 189, ##ctx) \ + FN(xdp_store_bytes, 190, ##ctx) \ + FN(copy_from_user_task, 191, ##ctx) \ + FN(skb_set_tstamp, 192, ##ctx) \ + FN(ima_file_hash, 193, ##ctx) \ + FN(kptr_xchg, 194, ##ctx) \ + FN(map_lookup_percpu_elem, 195, ##ctx) \ + FN(skc_to_mptcp_sock, 196, ##ctx) \ + FN(dynptr_from_mem, 197, ##ctx) \ + FN(ringbuf_reserve_dynptr, 198, ##ctx) \ + FN(ringbuf_submit_dynptr, 199, ##ctx) \ + FN(ringbuf_discard_dynptr, 200, ##ctx) \ + FN(dynptr_read, 201, ##ctx) \ + FN(dynptr_write, 202, ##ctx) \ + FN(dynptr_data, 203, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv4, 204, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv6, 205, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv4, 206, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv6, 207, ##ctx) \ + FN(ktime_get_tai_ns, 208, ##ctx) \ + FN(user_ringbuf_drain, 209, ##ctx) \ + FN(cgrp_storage_get, 210, ##ctx) \ + FN(cgrp_storage_delete, 211, ##ctx) \ + /* */ + +/* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't + * know or care about integer value that is now passed as second argument + */ +#define __BPF_FUNC_MAPPER_APPLY(name, value, FN) FN(name), +#define __BPF_FUNC_MAPPER(FN) ___BPF_FUNC_MAPPER(__BPF_FUNC_MAPPER_APPLY, FN) + +/* integer value in 'imm' field of BPF_CALL instruction selects which helper + * function eBPF program intends to call + */ +#define __BPF_ENUM_FN(x, y) BPF_FUNC_ ## x = y, +enum bpf_func_id { + ___BPF_FUNC_MAPPER(__BPF_ENUM_FN) + __BPF_FUNC_MAX_ID, +}; +#undef __BPF_ENUM_FN + +/* All flags used by eBPF helper functions, placed here. */ + +/* BPF_FUNC_skb_store_bytes flags. */ +enum { + BPF_F_RECOMPUTE_CSUM = (1ULL << 0), + BPF_F_INVALIDATE_HASH = (1ULL << 1), +}; + +/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. + * First 4 bits are for passing the header field size. + */ +enum { + BPF_F_HDR_FIELD_MASK = 0xfULL, +}; + +/* BPF_FUNC_l4_csum_replace flags. */ +enum { + BPF_F_PSEUDO_HDR = (1ULL << 4), + BPF_F_MARK_MANGLED_0 = (1ULL << 5), + BPF_F_MARK_ENFORCE = (1ULL << 6), +}; + +/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ +enum { + BPF_F_INGRESS = (1ULL << 0), +}; + +/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_IPV6 = (1ULL << 0), +}; + +/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ +enum { + BPF_F_SKIP_FIELD_MASK = 0xffULL, + BPF_F_USER_STACK = (1ULL << 8), +/* flags used by BPF_FUNC_get_stackid only. */ + BPF_F_FAST_STACK_CMP = (1ULL << 9), + BPF_F_REUSE_STACKID = (1ULL << 10), +/* flags used by BPF_FUNC_get_stack only. */ + BPF_F_USER_BUILD_ID = (1ULL << 11), +}; + +/* BPF_FUNC_skb_set_tunnel_key flags. */ +enum { + BPF_F_ZERO_CSUM_TX = (1ULL << 1), + BPF_F_DONT_FRAGMENT = (1ULL << 2), + BPF_F_SEQ_NUMBER = (1ULL << 3), + BPF_F_NO_TUNNEL_KEY = (1ULL << 4), +}; + +/* BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_FLAGS = (1ULL << 4), +}; + +/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and + * BPF_FUNC_perf_event_read_value flags. + */ +enum { + BPF_F_INDEX_MASK = 0xffffffffULL, + BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK, +/* BPF_FUNC_perf_event_output for sk_buff input context. */ + BPF_F_CTXLEN_MASK = (0xfffffULL << 32), +}; + +/* Current network namespace */ +enum { + BPF_F_CURRENT_NETNS = (-1L), +}; + +/* BPF_FUNC_csum_level level values. */ +enum { + BPF_CSUM_LEVEL_QUERY, + BPF_CSUM_LEVEL_INC, + BPF_CSUM_LEVEL_DEC, + BPF_CSUM_LEVEL_RESET, +}; + +/* BPF_FUNC_skb_adjust_room flags. */ +enum { + BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), + BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), + BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), + BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), + BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), + BPF_F_ADJ_ROOM_DECAP_L3_IPV4 = (1ULL << 7), + BPF_F_ADJ_ROOM_DECAP_L3_IPV6 = (1ULL << 8), +}; + +enum { + BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff, + BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56, +}; + +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +enum { + BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), +}; + +/* BPF_FUNC_<kernel_obj>_storage_get flags */ +enum { + BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), + /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility + * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. + */ + BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, +}; + +/* BPF_FUNC_read_branch_records flags. */ +enum { + BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), +}; + +/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and + * BPF_FUNC_bpf_ringbuf_output flags. + */ +enum { + BPF_RB_NO_WAKEUP = (1ULL << 0), + BPF_RB_FORCE_WAKEUP = (1ULL << 1), +}; + +/* BPF_FUNC_bpf_ringbuf_query flags */ +enum { + BPF_RB_AVAIL_DATA = 0, + BPF_RB_RING_SIZE = 1, + BPF_RB_CONS_POS = 2, + BPF_RB_PROD_POS = 3, +}; + +/* BPF ring buffer constants */ +enum { + BPF_RINGBUF_BUSY_BIT = (1U << 31), + BPF_RINGBUF_DISCARD_BIT = (1U << 30), + BPF_RINGBUF_HDR_SZ = 8, +}; + +/* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */ +enum { + BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0), + BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1), +}; + +/* Mode for BPF_FUNC_skb_adjust_room helper. */ +enum bpf_adj_room_mode { + BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, +}; + +/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ +enum bpf_hdr_start_off { + BPF_HDR_START_MAC, + BPF_HDR_START_NET, +}; + +/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ +enum bpf_lwt_encap_mode { + BPF_LWT_ENCAP_SEG6, + BPF_LWT_ENCAP_SEG6_INLINE, + BPF_LWT_ENCAP_IP, +}; + +/* Flags for bpf_bprm_opts_set helper */ +enum { + BPF_F_BPRM_SECUREEXEC = (1ULL << 0), +}; + +/* Flags for bpf_redirect_map helper */ +enum { + BPF_F_BROADCAST = (1ULL << 3), + BPF_F_EXCLUDE_INGRESS = (1ULL << 4), +}; + +#define __bpf_md_ptr(type, name) \ +union { \ + type name; \ + __u64 :64; \ +} __attribute__((aligned(8))) + +enum { + BPF_SKB_TSTAMP_UNSPEC, + BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ + /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, + * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC + * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + */ +}; + +/* user accessible mirror of in-kernel sk_buff. + * new fields can only be added to the end of this structure + */ +struct __sk_buff { + __u32 len; + __u32 pkt_type; + __u32 mark; + __u32 queue_mapping; + __u32 protocol; + __u32 vlan_present; + __u32 vlan_tci; + __u32 vlan_proto; + __u32 priority; + __u32 ingress_ifindex; + __u32 ifindex; + __u32 tc_index; + __u32 cb[5]; + __u32 hash; + __u32 tc_classid; + __u32 data; + __u32 data_end; + __u32 napi_id; + + /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + /* ... here. */ + + __u32 data_meta; + __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); + __u64 tstamp; + __u32 wire_len; + __u32 gso_segs; + __bpf_md_ptr(struct bpf_sock *, sk); + __u32 gso_size; + __u8 tstamp_type; + __u32 :24; /* Padding, future use. */ + __u64 hwtstamp; +}; + +struct bpf_tunnel_key { + __u32 tunnel_id; + union { + __u32 remote_ipv4; + __u32 remote_ipv6[4]; + }; + __u8 tunnel_tos; + __u8 tunnel_ttl; + union { + __u16 tunnel_ext; /* compat */ + __be16 tunnel_flags; + }; + __u32 tunnel_label; + union { + __u32 local_ipv4; + __u32 local_ipv6[4]; + }; +}; + +/* user accessible mirror of in-kernel xfrm_state. + * new fields can only be added to the end of this structure + */ +struct bpf_xfrm_state { + __u32 reqid; + __u32 spi; /* Stored in network byte order */ + __u16 family; + __u16 ext; /* Padding, future use. */ + union { + __u32 remote_ipv4; /* Stored in network byte order */ + __u32 remote_ipv6[4]; /* Stored in network byte order */ + }; +}; + +/* Generic BPF return codes which all BPF program types may support. + * The values are binary compatible with their TC_ACT_* counter-part to + * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT + * programs. + * + * XDP is handled seprately, see XDP_*. + */ +enum bpf_ret_code { + BPF_OK = 0, + /* 1 reserved */ + BPF_DROP = 2, + /* 3-6 reserved */ + BPF_REDIRECT = 7, + /* >127 are reserved for prog type specific return codes. + * + * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and + * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been + * changed and should be routed based on its new L3 header. + * (This is an L3 redirect, as opposed to L2 redirect + * represented by BPF_REDIRECT above). + */ + BPF_LWT_REROUTE = 128, + /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR + * to indicate that no custom dissection was performed, and + * fallback to standard dissector is requested. + */ + BPF_FLOW_DISSECTOR_CONTINUE = 129, +}; + +struct bpf_sock { + __u32 bound_dev_if; + __u32 family; + __u32 type; + __u32 protocol; + __u32 mark; + __u32 priority; + /* IP address also allows 1 and 2 bytes access */ + __u32 src_ip4; + __u32 src_ip6[4]; + __u32 src_port; /* host byte order */ + __be16 dst_port; /* network byte order */ + __u16 :16; /* zero padding */ + __u32 dst_ip4; + __u32 dst_ip6[4]; + __u32 state; + __s32 rx_queue_mapping; +}; + +struct bpf_tcp_sock { + __u32 snd_cwnd; /* Sending congestion window */ + __u32 srtt_us; /* smoothed round trip time << 3 in usecs */ + __u32 rtt_min; + __u32 snd_ssthresh; /* Slow start size threshold */ + __u32 rcv_nxt; /* What we want to receive next */ + __u32 snd_nxt; /* Next sequence we send */ + __u32 snd_una; /* First byte we want an ack for */ + __u32 mss_cache; /* Cached effective mss, not including SACKS */ + __u32 ecn_flags; /* ECN status bits. */ + __u32 rate_delivered; /* saved rate sample: packets delivered */ + __u32 rate_interval_us; /* saved rate sample: time elapsed */ + __u32 packets_out; /* Packets which are "in flight" */ + __u32 retrans_out; /* Retransmitted packets out */ + __u32 total_retrans; /* Total retransmits for entire connection */ + __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn + * total number of segments in. + */ + __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn + * total number of data segments in. + */ + __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut + * The total number of segments sent. + */ + __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut + * total number of data segments sent. + */ + __u32 lost_out; /* Lost packets */ + __u32 sacked_out; /* SACK'd packets */ + __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived + * sum(delta(rcv_nxt)), or how many bytes + * were acked. + */ + __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked + * sum(delta(snd_una)), or how many bytes + * were acked. + */ + __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups + * total number of DSACK blocks received + */ + __u32 delivered; /* Total data packets delivered incl. rexmits */ + __u32 delivered_ce; /* Like the above but only ECE marked packets */ + __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ +}; + +struct bpf_sock_tuple { + union { + struct { + __be32 saddr; + __be32 daddr; + __be16 sport; + __be16 dport; + } ipv4; + struct { + __be32 saddr[4]; + __be32 daddr[4]; + __be16 sport; + __be16 dport; + } ipv6; + }; +}; + +/* (Simplified) user return codes for tcx prog type. + * A valid tcx program must return one of these defined values. All other + * return codes are reserved for future use. Must remain compatible with + * their TC_ACT_* counter-parts. For compatibility in behavior, unknown + * return codes are mapped to TCX_NEXT. + */ +enum tcx_action_base { + TCX_NEXT = -1, + TCX_PASS = 0, + TCX_DROP = 2, + TCX_REDIRECT = 7, +}; + +struct bpf_xdp_sock { + __u32 queue_id; +}; + +#define XDP_PACKET_HEADROOM 256 + +/* User return codes for XDP prog type. + * A valid XDP program must return one of these defined values. All other + * return codes are reserved for future use. Unknown return codes will + * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). + */ +enum xdp_action { + XDP_ABORTED = 0, + XDP_DROP, + XDP_PASS, + XDP_TX, + XDP_REDIRECT, +}; + +/* user accessible metadata for XDP packet hook + * new fields must be added to the end of this structure + */ +struct xdp_md { + __u32 data; + __u32 data_end; + __u32 data_meta; + /* Below access go through struct xdp_rxq_info */ + __u32 ingress_ifindex; /* rxq->dev->ifindex */ + __u32 rx_queue_index; /* rxq->queue_index */ + + __u32 egress_ifindex; /* txq->dev->ifindex */ +}; + +/* DEVMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_devmap_val { + __u32 ifindex; /* device index */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +/* CPUMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_cpumap_val { + __u32 qsize; /* queue size to remote target CPU */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +enum sk_action { + SK_DROP = 0, + SK_PASS, +}; + +/* user accessible metadata for SK_MSG packet hook, new fields must + * be added to the end of this structure + */ +struct sk_msg_md { + __bpf_md_ptr(void *, data); + __bpf_md_ptr(void *, data_end); + + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 size; /* Total size of sk_msg */ + + __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ +}; + +struct sk_reuseport_md { + /* + * Start of directly accessible data. It begins from + * the tcp/udp header. + */ + __bpf_md_ptr(void *, data); + /* End of directly accessible data */ + __bpf_md_ptr(void *, data_end); + /* + * Total length of packet (starting from the tcp/udp header). + * Note that the directly accessible bytes (data_end - data) + * could be less than this "len". Those bytes could be + * indirectly read by a helper "bpf_skb_load_bytes()". + */ + __u32 len; + /* + * Eth protocol in the mac header (network byte order). e.g. + * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) + */ + __u32 eth_protocol; + __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ + __u32 bind_inany; /* Is sock bound to an INANY address? */ + __u32 hash; /* A hash of the packet 4 tuples */ + /* When reuse->migrating_sk is NULL, it is selecting a sk for the + * new incoming connection request (e.g. selecting a listen sk for + * the received SYN in the TCP case). reuse->sk is one of the sk + * in the reuseport group. The bpf prog can use reuse->sk to learn + * the local listening ip/port without looking into the skb. + * + * When reuse->migrating_sk is not NULL, reuse->sk is closed and + * reuse->migrating_sk is the socket that needs to be migrated + * to another listening socket. migrating_sk could be a fullsock + * sk that is fully established or a reqsk that is in-the-middle + * of 3-way handshake. + */ + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(struct bpf_sock *, migrating_sk); +}; + +#define BPF_TAG_SIZE 8 + +struct bpf_prog_info { + __u32 type; + __u32 id; + __u8 tag[BPF_TAG_SIZE]; + __u32 jited_prog_len; + __u32 xlated_prog_len; + __aligned_u64 jited_prog_insns; + __aligned_u64 xlated_prog_insns; + __u64 load_time; /* ns since boottime */ + __u32 created_by_uid; + __u32 nr_map_ids; + __aligned_u64 map_ids; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 gpl_compatible:1; + __u32 :31; /* alignment pad */ + __u64 netns_dev; + __u64 netns_ino; + __u32 nr_jited_ksyms; + __u32 nr_jited_func_lens; + __aligned_u64 jited_ksyms; + __aligned_u64 jited_func_lens; + __u32 btf_id; + __u32 func_info_rec_size; + __aligned_u64 func_info; + __u32 nr_func_info; + __u32 nr_line_info; + __aligned_u64 line_info; + __aligned_u64 jited_line_info; + __u32 nr_jited_line_info; + __u32 line_info_rec_size; + __u32 jited_line_info_rec_size; + __u32 nr_prog_tags; + __aligned_u64 prog_tags; + __u64 run_time_ns; + __u64 run_cnt; + __u64 recursion_misses; + __u32 verified_insns; + __u32 attach_btf_obj_id; + __u32 attach_btf_id; +} __attribute__((aligned(8))); + +struct bpf_map_info { + __u32 type; + __u32 id; + __u32 key_size; + __u32 value_size; + __u32 max_entries; + __u32 map_flags; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 btf_vmlinux_value_type_id; + __u64 netns_dev; + __u64 netns_ino; + __u32 btf_id; + __u32 btf_key_type_id; + __u32 btf_value_type_id; + __u32 :32; /* alignment pad */ + __u64 map_extra; +} __attribute__((aligned(8))); + +struct bpf_btf_info { + __aligned_u64 btf; + __u32 btf_size; + __u32 id; + __aligned_u64 name; + __u32 name_len; + __u32 kernel_btf; +} __attribute__((aligned(8))); + +struct bpf_link_info { + __u32 type; + __u32 id; + __u32 prog_id; + union { + struct { + __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ + __u32 tp_name_len; /* in/out: tp_name buffer len */ + } raw_tracepoint; + struct { + __u32 attach_type; + __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */ + __u32 target_btf_id; /* BTF type id inside the object */ + } tracing; + struct { + __u64 cgroup_id; + __u32 attach_type; + } cgroup; + struct { + __aligned_u64 target_name; /* in/out: target_name buffer ptr */ + __u32 target_name_len; /* in/out: target_name buffer len */ + + /* If the iter specific field is 32 bits, it can be put + * in the first or second union. Otherwise it should be + * put in the second union. + */ + union { + struct { + __u32 map_id; + } map; + }; + union { + struct { + __u64 cgroup_id; + __u32 order; + } cgroup; + struct { + __u32 tid; + __u32 pid; + } task; + }; + } iter; + struct { + __u32 netns_ino; + __u32 attach_type; + } netns; + struct { + __u32 ifindex; + } xdp; + struct { + __u32 map_id; + } struct_ops; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + __aligned_u64 addrs; + __u32 count; /* in/out: kprobe_multi function count */ + __u32 flags; + __u64 missed; + } kprobe_multi; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 path_size; /* in/out: real path size on success, including zero byte */ + __u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */ + __u32 flags; + __u32 pid; + } uprobe_multi; + struct { + __u32 type; /* enum bpf_perf_event_type */ + __u32 :32; + union { + struct { + __aligned_u64 file_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from file_name */ + } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ + struct { + __aligned_u64 func_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from func_name */ + __u64 addr; + __u64 missed; + } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ + struct { + __aligned_u64 tp_name; /* in/out */ + __u32 name_len; + } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ + struct { + __u64 config; + __u32 type; + } event; /* BPF_PERF_EVENT_EVENT */ + }; + } perf_event; + struct { + __u32 ifindex; + __u32 attach_type; + } tcx; + struct { + __u32 ifindex; + __u32 attach_type; + } netkit; + }; +} __attribute__((aligned(8))); + +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed + * by user and intended to be used by socket (e.g. to bind to, depends on + * attach type). + */ +struct bpf_sock_addr { + __u32 user_family; /* Allows 4-byte read, but no write. */ + __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order + */ + __u32 family; /* Allows 4-byte read, but no write */ + __u32 type; /* Allows 4-byte read, but no write */ + __u32 protocol; /* Allows 4-byte read, but no write */ + __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __bpf_md_ptr(struct bpf_sock *, sk); +}; + +/* User bpf_sock_ops struct to access socket values and specify request ops + * and their replies. + * Some of this fields are in network (bigendian) byte order and may need + * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). + * New fields can only be added at the end of this structure + */ +struct bpf_sock_ops { + __u32 op; + union { + __u32 args[4]; /* Optionally passed to bpf program */ + __u32 reply; /* Returned by bpf program */ + __u32 replylong[4]; /* Optionally returned by bpf prog */ + }; + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 is_fullsock; /* Some TCP fields are only valid if + * there is a full socket. If not, the + * fields read as zero. + */ + __u32 snd_cwnd; + __u32 srtt_us; /* Averaged RTT << 3 in usecs */ + __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ + __u32 state; + __u32 rtt_min; + __u32 snd_ssthresh; + __u32 rcv_nxt; + __u32 snd_nxt; + __u32 snd_una; + __u32 mss_cache; + __u32 ecn_flags; + __u32 rate_delivered; + __u32 rate_interval_us; + __u32 packets_out; + __u32 retrans_out; + __u32 total_retrans; + __u32 segs_in; + __u32 data_segs_in; + __u32 segs_out; + __u32 data_segs_out; + __u32 lost_out; + __u32 sacked_out; + __u32 sk_txhash; + __u64 bytes_received; + __u64 bytes_acked; + __bpf_md_ptr(struct bpf_sock *, sk); + /* [skb_data, skb_data_end) covers the whole TCP header. + * + * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received + * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the + * header has not been written. + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have + * been written so far. + * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes + * the 3WHS. + * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes + * the 3WHS. + * + * bpf_load_hdr_opt() can also be used to read a particular option. + */ + __bpf_md_ptr(void *, skb_data); + __bpf_md_ptr(void *, skb_data_end); + __u32 skb_len; /* The total length of a packet. + * It includes the header, options, + * and payload. + */ + __u32 skb_tcp_flags; /* tcp_flags of the header. It provides + * an easy way to check for tcp_flags + * without parsing skb_data. + * + * In particular, the skb_tcp_flags + * will still be available in + * BPF_SOCK_OPS_HDR_OPT_LEN even though + * the outgoing header has not + * been written yet. + */ + __u64 skb_hwtstamp; +}; + +/* Definitions for bpf_sock_ops_cb_flags */ +enum { + BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0), + BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), + BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), + BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), + /* Call bpf for all received TCP headers. The bpf prog will be + * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + * + * It could be used at the client/active side (i.e. connect() side) + * when the server told it that the server was in syncookie + * mode and required the active side to resend the bpf-written + * options. The active side can keep writing the bpf-options until + * it received a valid packet from the server side to confirm + * the earlier packet (and options) has been received. The later + * example patch is using it like this at the active side when the + * server is in syncookie mode. + * + * The bpf prog will usually turn this off in the common cases. + */ + BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), + /* Call bpf when kernel has received a header option that + * the kernel cannot handle. The bpf prog will be called under + * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + */ + BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), + /* Call bpf when the kernel is writing header options for the + * outgoing packet. The bpf prog will first be called + * to reserve space in a skb under + * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then + * the bpf prog will be called to write the header option(s) + * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB + * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option + * related helpers that will be useful to the bpf programs. + * + * The kernel gets its chance to reserve space and write + * options first before the BPF program does. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), +/* Mask of all currently supported cb flags */ + BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, +}; + +/* List of known BPF sock_ops operators. + * New entries can only be added at the end + */ +enum { + BPF_SOCK_OPS_VOID, + BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or + * -1 if default value should be used + */ + BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized + * window (in packets) or -1 if default + * value should be used + */ + BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an + * active connection is initialized + */ + BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an + * active connection is + * established + */ + BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a + * passive connection is + * established + */ + BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control + * needs ECN + */ + BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is + * based on the path and may be + * dependent on the congestion control + * algorithm. In general it indicates + * a congestion threshold. RTTs above + * this indicate congestion + */ + BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. + * Arg1: value of icsk_retransmits + * Arg2: value of icsk_rto + * Arg3: whether RTO has expired + */ + BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. + * Arg1: sequence number of 1st byte + * Arg2: # segments + * Arg3: return value of + * tcp_transmit_skb (0 => success) + */ + BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. + * Arg1: old_state + * Arg2: new_state + */ + BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after + * socket transition to LISTEN state. + */ + BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + */ + BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. + * It will be called to handle + * the packets received at + * an already established + * connection. + * + * sock_ops->skb_data: + * Referring to the received skb. + * It covers the TCP header only. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option. + */ + BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the + * header option later in + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Not available because no header has + * been written yet. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the + * outgoing skb. (e.g. SYN, ACK, FIN). + * + * bpf_reserve_hdr_opt() should + * be used to reserve space. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Referring to the outgoing skb. + * It covers the TCP header + * that has already been written + * by the kernel and the + * earlier bpf-progs. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the outgoing + * skb. (e.g. SYN, ACK, FIN). + * + * bpf_store_hdr_opt() should + * be used to write the + * option. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option that + * has already been written + * by the kernel or the + * earlier bpf-progs. + */ +}; + +/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect + * changes between the TCP and BPF versions. Ideally this should never happen. + * If it does, we need to add code to convert them before calling + * the BPF sock_ops function. + */ +enum { + BPF_TCP_ESTABLISHED = 1, + BPF_TCP_SYN_SENT, + BPF_TCP_SYN_RECV, + BPF_TCP_FIN_WAIT1, + BPF_TCP_FIN_WAIT2, + BPF_TCP_TIME_WAIT, + BPF_TCP_CLOSE, + BPF_TCP_CLOSE_WAIT, + BPF_TCP_LAST_ACK, + BPF_TCP_LISTEN, + BPF_TCP_CLOSING, /* Now a valid state */ + BPF_TCP_NEW_SYN_RECV, + BPF_TCP_BOUND_INACTIVE, + + BPF_TCP_MAX_STATES /* Leave at the end! */ +}; + +enum { + TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ + TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ + TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ + TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ + /* Copy the SYN pkt to optval + * + * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the + * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit + * to only getting from the saved_syn. It can either get the + * syn packet from: + * + * 1. the just-received SYN packet (only available when writing the + * SYNACK). It will be useful when it is not necessary to + * save the SYN packet for latter use. It is also the only way + * to get the SYN during syncookie mode because the syn + * packet cannot be saved during syncookie. + * + * OR + * + * 2. the earlier saved syn which was done by + * bpf_setsockopt(TCP_SAVE_SYN). + * + * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the + * SYN packet is obtained. + * + * If the bpf-prog does not need the IP[46] header, the + * bpf-prog can avoid parsing the IP header by using + * TCP_BPF_SYN. Otherwise, the bpf-prog can get both + * IP[46] and TCP header by using TCP_BPF_SYN_IP. + * + * >0: Total number of bytes copied + * -ENOSPC: Not enough space in optval. Only optlen number of + * bytes is copied. + * -ENOENT: The SYN skb is not available now and the earlier SYN pkt + * is not saved by setsockopt(TCP_SAVE_SYN). + */ + TCP_BPF_SYN = 1005, /* Copy the TCP header */ + TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ + TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ +}; + +enum { + BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), +}; + +/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + */ +enum { + BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the + * total option spaces + * required for an established + * sk in order to calculate the + * MSS. No skb is actually + * sent. + */ + BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode + * when sending a SYN. + */ +}; + +struct bpf_perf_event_value { + __u64 counter; + __u64 enabled; + __u64 running; +}; + +enum { + BPF_DEVCG_ACC_MKNOD = (1ULL << 0), + BPF_DEVCG_ACC_READ = (1ULL << 1), + BPF_DEVCG_ACC_WRITE = (1ULL << 2), +}; + +enum { + BPF_DEVCG_DEV_BLOCK = (1ULL << 0), + BPF_DEVCG_DEV_CHAR = (1ULL << 1), +}; + +struct bpf_cgroup_dev_ctx { + /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ + __u32 access_type; + __u32 major; + __u32 minor; +}; + +struct bpf_raw_tracepoint_args { + __u64 args[0]; +}; + +/* DIRECT: Skip the FIB rules and go to FIB table associated with device + * OUTPUT: Do lookup from egress perspective; default is ingress + */ +enum { + BPF_FIB_LOOKUP_DIRECT = (1U << 0), + BPF_FIB_LOOKUP_OUTPUT = (1U << 1), + BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), + BPF_FIB_LOOKUP_SRC = (1U << 4), +}; + +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ +}; + +struct bpf_fib_lookup { + /* input: network family for lookup (AF_INET, AF_INET6) + * output: network family of egress nexthop + */ + __u8 family; + + /* set if lookup is to consider L4 data - e.g., FIB rules */ + __u8 l4_protocol; + __be16 sport; + __be16 dport; + + union { /* used for MTU check */ + /* input to lookup */ + __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ + + /* output: MTU value */ + __u16 mtu_result; + }; + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; + + union { + /* inputs to lookup */ + __u8 tos; /* AF_INET */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ + + /* output: metric of fib result (IPv4/IPv6 only) */ + __u32 rt_metric; + }; + + /* input: source address to consider for lookup + * output: source address result from lookup + */ + union { + __be32 ipv4_src; + __u32 ipv6_src[4]; /* in6_addr; network order */ + }; + + /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in + * network header. output: bpf_fib_lookup sets to gateway address + * if FIB lookup returns gateway route + */ + union { + __be32 ipv4_dst; + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ +}; + +struct bpf_redir_neigh { + /* network family for lookup (AF_INET, AF_INET6) */ + __u32 nh_family; + /* network address of nexthop; skips fib lookup to find gateway */ + union { + __be32 ipv4_nh; + __u32 ipv6_nh[4]; /* in6_addr; network order */ + }; +}; + +/* bpf_check_mtu flags*/ +enum bpf_check_mtu_flags { + BPF_MTU_CHK_SEGS = (1U << 0), +}; + +enum bpf_check_mtu_ret { + BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ + BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ +}; + +enum bpf_task_fd_type { + BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_UPROBE, /* filename + offset */ + BPF_FD_TYPE_URETPROBE, /* filename + offset */ +}; + +enum { + BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0), + BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1), + BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2), +}; + +struct bpf_flow_keys { + __u16 nhoff; + __u16 thoff; + __u16 addr_proto; /* ETH_P_* of valid addrs */ + __u8 is_frag; + __u8 is_first_frag; + __u8 is_encap; + __u8 ip_proto; + __be16 n_proto; + __be16 sport; + __be16 dport; + union { + struct { + __be32 ipv4_src; + __be32 ipv4_dst; + }; + struct { + __u32 ipv6_src[4]; /* in6_addr; network order */ + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + }; + __u32 flags; + __be32 flow_label; +}; + +struct bpf_func_info { + __u32 insn_off; + __u32 type_id; +}; + +#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) +#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) + +struct bpf_line_info { + __u32 insn_off; + __u32 file_name_off; + __u32 line_off; + __u32 line_col; +}; + +struct bpf_spin_lock { + __u32 val; +}; + +struct bpf_timer { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_dynptr { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_list_head { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_list_node { + __u64 __opaque[3]; +} __attribute__((aligned(8))); + +struct bpf_rb_root { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_rb_node { + __u64 __opaque[4]; +} __attribute__((aligned(8))); + +struct bpf_refcount { + __u32 __opaque[1]; +} __attribute__((aligned(4))); + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + +struct bpf_sockopt { + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(void *, optval); + __bpf_md_ptr(void *, optval_end); + + __s32 level; + __s32 optname; + __s32 optlen; + __s32 retval; +}; + +struct bpf_pidns_info { + __u32 pid; + __u32 tgid; +}; + +/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ +struct bpf_sk_lookup { + union { + __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ + }; + + __u32 family; /* Protocol family (AF_INET, AF_INET6) */ + __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ + __u32 remote_ip4; /* Network byte order */ + __u32 remote_ip6[4]; /* Network byte order */ + __be16 remote_port; /* Network byte order */ + __u16 :16; /* Zero padding */ + __u32 local_ip4; /* Network byte order */ + __u32 local_ip6[4]; /* Network byte order */ + __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ +}; + +/* + * struct btf_ptr is used for typed pointer representation; the + * type id is used to render the pointer data as the appropriate type + * via the bpf_snprintf_btf() helper described above. A flags field - + * potentially to specify additional details about the BTF pointer + * (rather than its mode of display) - is included for future use. + * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. + */ +struct btf_ptr { + void *ptr; + __u32 type_id; + __u32 flags; /* BTF ptr flags; unused at present. */ +}; + +/* + * Flags to control bpf_snprintf_btf() behaviour. + * - BTF_F_COMPACT: no formatting around type information + * - BTF_F_NONAME: no struct/union member names/types + * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; + * equivalent to %px. + * - BTF_F_ZERO: show zero-valued struct/union members; they + * are not displayed by default + */ +enum { + BTF_F_COMPACT = (1ULL << 0), + BTF_F_NONAME = (1ULL << 1), + BTF_F_PTR_RAW = (1ULL << 2), + BTF_F_ZERO = (1ULL << 3), +}; + +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ + BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + +/* + * Flags to control bpf_timer_start() behaviour. + * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is + * relative to current time. + * - BPF_F_TIMER_CPU_PIN: Timer will be pinned to the CPU of the caller. + */ +enum { + BPF_F_TIMER_ABS = (1ULL << 0), + BPF_F_TIMER_CPU_PIN = (1ULL << 1), +}; + +/* BPF numbers iterator state */ +struct bpf_iter_num { + /* opaque iterator state; having __u64 here allows to preserve correct + * alignment requirements in vmlinux.h, generated from BTF + */ + __u64 __opaque[1]; +} __attribute__((aligned(8))); + +#endif /* __LINUX_BPF_H__ */ diff --git a/include/uapi/linux/bpf_common.h b/include/uapi/linux/bpf_common.h new file mode 100644 index 0000000..f0fe139 --- /dev/null +++ b/include/uapi/linux/bpf_common.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_BPF_COMMON_H__ +#define __LINUX_BPF_COMMON_H__ + +/* Instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 /* 32-bit */ +#define BPF_H 0x08 /* 16-bit */ +#define BPF_B 0x10 /* 8-bit */ +/* eBPF BPF_DW 0x18 64-bit */ +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 + +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +#ifndef BPF_MAXINSNS +#define BPF_MAXINSNS 4096 +#endif + +#endif /* __LINUX_BPF_COMMON_H__ */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h new file mode 100644 index 0000000..426daf5 --- /dev/null +++ b/include/uapi/linux/btf.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2018 Facebook */ +#ifndef __LINUX_BTF_H__ +#define __LINUX_BTF_H__ + +#include <linux/types.h> + +#define BTF_MAGIC 0xeB9F +#define BTF_VERSION 1 + +struct btf_header { + __u16 magic; + __u8 version; + __u8 flags; + __u32 hdr_len; + + /* All offsets are in bytes relative to the end of this header */ + __u32 type_off; /* offset of type section */ + __u32 type_len; /* length of type section */ + __u32 str_off; /* offset of string section */ + __u32 str_len; /* length of string section */ +}; + +/* Max # of type identifier */ +#define BTF_MAX_TYPE 0x000fffff +/* Max offset into the string section */ +#define BTF_MAX_NAME_OFFSET 0x00ffffff +/* Max # of struct/union/enum members or func args */ +#define BTF_MAX_VLEN 0xffff + +struct btf_type { + __u32 name_off; + /* "info" bits arrangement + * bits 0-15: vlen (e.g. # of struct's members) + * bits 16-23: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused + * bit 31: kind_flag, currently used by + * struct, union, enum, fwd and enum64 + */ + __u32 info; + /* "size" is used by INT, ENUM, STRUCT, UNION, DATASEC and ENUM64. + * "size" tells the size of the type it is describing. + * + * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. + * "type" is a type_id referring to another type. + */ + union { + __u32 size; + __u32 type; + }; +}; + +#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f) +#define BTF_INFO_VLEN(info) ((info) & 0xffff) +#define BTF_INFO_KFLAG(info) ((info) >> 31) + +enum { + BTF_KIND_UNKN = 0, /* Unknown */ + BTF_KIND_INT = 1, /* Integer */ + BTF_KIND_PTR = 2, /* Pointer */ + BTF_KIND_ARRAY = 3, /* Array */ + BTF_KIND_STRUCT = 4, /* Struct */ + BTF_KIND_UNION = 5, /* Union */ + BTF_KIND_ENUM = 6, /* Enumeration up to 32-bit values */ + BTF_KIND_FWD = 7, /* Forward */ + BTF_KIND_TYPEDEF = 8, /* Typedef */ + BTF_KIND_VOLATILE = 9, /* Volatile */ + BTF_KIND_CONST = 10, /* Const */ + BTF_KIND_RESTRICT = 11, /* Restrict */ + BTF_KIND_FUNC = 12, /* Function */ + BTF_KIND_FUNC_PROTO = 13, /* Function Proto */ + BTF_KIND_VAR = 14, /* Variable */ + BTF_KIND_DATASEC = 15, /* Section */ + BTF_KIND_FLOAT = 16, /* Floating point */ + BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ + BTF_KIND_ENUM64 = 19, /* Enumeration up to 64-bit values */ + + NR_BTF_KINDS, + BTF_KIND_MAX = NR_BTF_KINDS - 1, +}; + +/* For some specific BTF_KIND, "struct btf_type" is immediately + * followed by extra data. + */ + +/* BTF_KIND_INT is followed by a u32 and the following + * is the 32 bits arrangement: + */ +#define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) +#define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16) +#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) + +/* Attributes stored in the BTF_INT_ENCODING */ +#define BTF_INT_SIGNED (1 << 0) +#define BTF_INT_CHAR (1 << 1) +#define BTF_INT_BOOL (1 << 2) + +/* BTF_KIND_ENUM is followed by multiple "struct btf_enum". + * The exact number of btf_enum is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum { + __u32 name_off; + __s32 val; +}; + +/* BTF_KIND_ARRAY is followed by one "struct btf_array" */ +struct btf_array { + __u32 type; + __u32 index_type; + __u32 nelems; +}; + +/* BTF_KIND_STRUCT and BTF_KIND_UNION are followed + * by multiple "struct btf_member". The exact number + * of btf_member is stored in the vlen (of the info in + * "struct btf_type"). + */ +struct btf_member { + __u32 name_off; + __u32 type; + /* If the type info kind_flag is set, the btf_member offset + * contains both member bitfield size and bit offset. The + * bitfield size is set for bitfield members. If the type + * info kind_flag is not set, the offset contains only bit + * offset. + */ + __u32 offset; +}; + +/* If the struct/union type info kind_flag is set, the + * following two macros are used to access bitfield_size + * and bit_offset from btf_member.offset. + */ +#define BTF_MEMBER_BITFIELD_SIZE(val) ((val) >> 24) +#define BTF_MEMBER_BIT_OFFSET(val) ((val) & 0xffffff) + +/* BTF_KIND_FUNC_PROTO is followed by multiple "struct btf_param". + * The exact number of btf_param is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_param { + __u32 name_off; + __u32 type; +}; + +enum { + BTF_VAR_STATIC = 0, + BTF_VAR_GLOBAL_ALLOCATED = 1, + BTF_VAR_GLOBAL_EXTERN = 2, +}; + +enum btf_func_linkage { + BTF_FUNC_STATIC = 0, + BTF_FUNC_GLOBAL = 1, + BTF_FUNC_EXTERN = 2, +}; + +/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe + * additional information related to the variable such as its linkage. + */ +struct btf_var { + __u32 linkage; +}; + +/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo" + * to describe all BTF_KIND_VAR types it contains along with it's + * in-section offset as well as size. + */ +struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; +}; + +/* BTF_KIND_DECL_TAG is followed by a single "struct btf_decl_tag" to describe + * additional information related to the tag applied location. + * If component_idx == -1, the tag is applied to a struct, union, + * variable or function. Otherwise, it is applied to a struct/union + * member or a func argument, and component_idx indicates which member + * or argument (0 ... vlen-1). + */ +struct btf_decl_tag { + __s32 component_idx; +}; + +/* BTF_KIND_ENUM64 is followed by multiple "struct btf_enum64". + * The exact number of btf_enum64 is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; +}; + +#endif /* __LINUX_BTF_H__ */ diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h new file mode 100644 index 0000000..23d5bf4 --- /dev/null +++ b/include/uapi/linux/can.h @@ -0,0 +1,289 @@ +/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * linux/can.h + * + * Definitions for CAN network layer (socket addr / CAN frame / CAN filter) + * + * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> + * Urs Thuermann <urs.thuermann@volkswagen.de> + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + */ + +#ifndef _CAN_H +#define _CAN_H + +#include <linux/types.h> +#include <linux/socket.h> +#include <linux/stddef.h> /* for offsetof */ + +/* controller area network (CAN) kernel definitions */ + +/* special address description flags for the CAN_ID */ +#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ +#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ +#define CAN_ERR_FLAG 0x20000000U /* error message frame */ + +/* valid bits in CAN ID for frame formats */ +#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ +#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */ +#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */ +#define CANXL_PRIO_MASK CAN_SFF_MASK /* 11 bit priority mask */ + +/* + * Controller Area Network Identifier structure + * + * bit 0-28 : CAN identifier (11/29 bit) + * bit 29 : error message frame flag (0 = data frame, 1 = error message) + * bit 30 : remote transmission request flag (1 = rtr frame) + * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) + */ +typedef __u32 canid_t; + +#define CAN_SFF_ID_BITS 11 +#define CAN_EFF_ID_BITS 29 +#define CANXL_PRIO_BITS CAN_SFF_ID_BITS + +/* + * Controller Area Network Error Message Frame Mask structure + * + * bit 0-28 : error class mask (see include/uapi/linux/can/error.h) + * bit 29-31 : set to zero + */ +typedef __u32 can_err_mask_t; + +/* CAN payload length and DLC definitions according to ISO 11898-1 */ +#define CAN_MAX_DLC 8 +#define CAN_MAX_RAW_DLC 15 +#define CAN_MAX_DLEN 8 + +/* CAN FD payload length and DLC definitions according to ISO 11898-7 */ +#define CANFD_MAX_DLC 15 +#define CANFD_MAX_DLEN 64 + +/* + * CAN XL payload length and DLC definitions according to ISO 11898-1 + * CAN XL DLC ranges from 0 .. 2047 => data length from 1 .. 2048 byte + */ +#define CANXL_MIN_DLC 0 +#define CANXL_MAX_DLC 2047 +#define CANXL_MAX_DLC_MASK 0x07FF +#define CANXL_MIN_DLEN 1 +#define CANXL_MAX_DLEN 2048 + +/** + * struct can_frame - Classical CAN frame structure (aka CAN 2.0B) + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: CAN frame payload length in byte (0 .. 8) + * @can_dlc: deprecated name for CAN frame payload length in byte (0 .. 8) + * @__pad: padding + * @__res0: reserved / padding + * @len8_dlc: optional DLC value (9 .. 15) at 8 byte payload length + * len8_dlc contains values from 9 .. 15 when the payload length is + * 8 bytes but the DLC value (see ISO 11898-1) is greater then 8. + * CAN_CTRLMODE_CC_LEN8_DLC flag has to be enabled in CAN driver. + * @data: CAN frame payload (up to 8 byte) + */ +struct can_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + union { + /* CAN frame payload length in byte (0 .. CAN_MAX_DLEN) + * was previously named can_dlc so we need to carry that + * name for legacy support + */ + __u8 len; + __u8 can_dlc; /* deprecated */ + } __attribute__((packed)); /* disable padding added in some ABIs */ + __u8 __pad; /* padding */ + __u8 __res0; /* reserved / padding */ + __u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); +}; + +/* + * defined bits for canfd_frame.flags + * + * The use of struct canfd_frame implies the FD Frame (FDF) bit to + * be set in the CAN frame bitstream on the wire. The FDF bit switch turns + * the CAN controllers bitstream processor into the CAN FD mode which creates + * two new options within the CAN FD frame specification: + * + * Bit Rate Switch - to indicate a second bitrate is/was used for the payload + * Error State Indicator - represents the error state of the transmitting node + * + * As the CANFD_ESI bit is internally generated by the transmitting CAN + * controller only the CANFD_BRS bit is relevant for real CAN controllers when + * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make + * sense for virtual CAN interfaces to test applications with echoed frames. + * + * The struct can_frame and struct canfd_frame intentionally share the same + * layout to be able to write CAN frame content into a CAN FD frame structure. + * When this is done the former differentiation via CAN_MTU / CANFD_MTU gets + * lost. CANFD_FDF allows programmers to mark CAN FD frames in the case of + * using struct canfd_frame for mixed CAN / CAN FD content (dual use). + * Since the introduction of CAN XL the CANFD_FDF flag is set in all CAN FD + * frame structures provided by the CAN subsystem of the Linux kernel. + */ +#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */ +#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */ +#define CANFD_FDF 0x04 /* mark CAN FD for dual use of struct canfd_frame */ + +/** + * struct canfd_frame - CAN flexible data rate frame structure + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN) + * @flags: additional flags for CAN FD + * @__res0: reserved / padding + * @__res1: reserved / padding + * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte) + */ +struct canfd_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + __u8 len; /* frame payload length in byte */ + __u8 flags; /* additional flags for CAN FD */ + __u8 __res0; /* reserved / padding */ + __u8 __res1; /* reserved / padding */ + __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); +}; + +/* + * defined bits for canxl_frame.flags + * + * The canxl_frame.flags element contains two bits CANXL_XLF and CANXL_SEC + * and shares the relative position of the struct can[fd]_frame.len element. + * The CANXL_XLF bit ALWAYS needs to be set to indicate a valid CAN XL frame. + * As a side effect setting this bit intentionally breaks the length checks + * for Classical CAN and CAN FD frames. + * + * Undefined bits in canxl_frame.flags are reserved and shall be set to zero. + */ +#define CANXL_XLF 0x80 /* mandatory CAN XL frame flag (must always be set!) */ +#define CANXL_SEC 0x01 /* Simple Extended Content (security/segmentation) */ + +/** + * struct canxl_frame - CAN with e'X'tended frame 'L'ength frame structure + * @prio: 11 bit arbitration priority with zero'ed CAN_*_FLAG flags + * @flags: additional flags for CAN XL + * @sdt: SDU (service data unit) type + * @len: frame payload length in byte (CANXL_MIN_DLEN .. CANXL_MAX_DLEN) + * @af: acceptance field + * @data: CAN XL frame payload (CANXL_MIN_DLEN .. CANXL_MAX_DLEN byte) + * + * @prio shares the same position as @can_id from struct can[fd]_frame. + */ +struct canxl_frame { + canid_t prio; /* 11 bit priority for arbitration (canid_t) */ + __u8 flags; /* additional flags for CAN XL */ + __u8 sdt; /* SDU (service data unit) type */ + __u16 len; /* frame payload length in byte */ + __u32 af; /* acceptance field */ + __u8 data[CANXL_MAX_DLEN]; +}; + +#define CAN_MTU (sizeof(struct can_frame)) +#define CANFD_MTU (sizeof(struct canfd_frame)) +#define CANXL_MTU (sizeof(struct canxl_frame)) +#define CANXL_HDR_SIZE (offsetof(struct canxl_frame, data)) +#define CANXL_MIN_MTU (CANXL_HDR_SIZE + 64) +#define CANXL_MAX_MTU CANXL_MTU + +/* particular protocols of the protocol family PF_CAN */ +#define CAN_RAW 1 /* RAW sockets */ +#define CAN_BCM 2 /* Broadcast Manager */ +#define CAN_TP16 3 /* VAG Transport Protocol v1.6 */ +#define CAN_TP20 4 /* VAG Transport Protocol v2.0 */ +#define CAN_MCNET 5 /* Bosch MCNet */ +#define CAN_ISOTP 6 /* ISO 15765-2 Transport Protocol */ +#define CAN_J1939 7 /* SAE J1939 */ +#define CAN_NPROTO 8 + +#define SOL_CAN_BASE 100 + +/** + * struct sockaddr_can - the sockaddr structure for CAN sockets + * @can_family: address family number AF_CAN. + * @can_ifindex: CAN network interface index. + * @can_addr: protocol specific address information + */ +struct sockaddr_can { + __kernel_sa_family_t can_family; + int can_ifindex; + union { + /* transport protocol class address information (e.g. ISOTP) */ + struct { canid_t rx_id, tx_id; } tp; + + /* J1939 address information */ + struct { + /* 8 byte name when using dynamic addressing */ + __u64 name; + + /* pgn: + * 8 bit: PS in PDU2 case, else 0 + * 8 bit: PF + * 1 bit: DP + * 1 bit: reserved + */ + __u32 pgn; + + /* 1 byte address */ + __u8 addr; + } j1939; + + /* reserved for future CAN protocols address information */ + } can_addr; +}; + +/** + * struct can_filter - CAN ID based filter in can_register(). + * @can_id: relevant bits of CAN ID which are not masked out. + * @can_mask: CAN mask (see description) + * + * Description: + * A filter matches, when + * + * <received_can_id> & mask == can_id & mask + * + * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can + * filter for error message frames (CAN_ERR_FLAG bit set in mask). + */ +struct can_filter { + canid_t can_id; + canid_t can_mask; +}; + +#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ + +#endif /* !_UAPI_CAN_H */ diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h new file mode 100644 index 0000000..8ec98c2 --- /dev/null +++ b/include/uapi/linux/can/netlink.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * linux/can/netlink.h + * + * Definitions for the CAN netlink interface + * + * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CAN_NETLINK_H +#define _CAN_NETLINK_H + +#include <linux/types.h> + +/* + * CAN bit-timing parameters + * + * For further information, please read chapter "8 BIT TIMING + * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" + * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. + */ +struct can_bittiming { + __u32 bitrate; /* Bit-rate in bits/second */ + __u32 sample_point; /* Sample point in one-tenth of a percent */ + __u32 tq; /* Time quanta (TQ) in nanoseconds */ + __u32 prop_seg; /* Propagation segment in TQs */ + __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ + __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ + __u32 sjw; /* Synchronisation jump width in TQs */ + __u32 brp; /* Bit-rate prescaler */ +}; + +/* + * CAN hardware-dependent bit-timing constant + * + * Used for calculating and checking bit-timing parameters + */ +struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segment 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; +}; + +/* + * CAN clock parameters + */ +struct can_clock { + __u32 freq; /* CAN system clock frequency in Hz */ +}; + +/* + * CAN operational and error states + */ +enum can_state { + CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ + CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ + CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ + CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ + CAN_STATE_STOPPED, /* Device is stopped */ + CAN_STATE_SLEEPING, /* Device is sleeping */ + CAN_STATE_MAX +}; + +/* + * CAN bus error counters + */ +struct can_berr_counter { + __u16 txerr; + __u16 rxerr; +}; + +/* + * CAN controller mode + */ +struct can_ctrlmode { + __u32 mask; + __u32 flags; +}; + +#define CAN_CTRLMODE_LOOPBACK 0x01 /* Loopback mode */ +#define CAN_CTRLMODE_LISTENONLY 0x02 /* Listen-only mode */ +#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ +#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ +#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ +#define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ +#define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ +#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ +#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */ +#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */ + +/* + * CAN device statistics + */ +struct can_device_stats { + __u32 bus_error; /* Bus errors */ + __u32 error_warning; /* Changes to error warning state */ + __u32 error_passive; /* Changes to error passive state */ + __u32 bus_off; /* Changes to bus off state */ + __u32 arbitration_lost; /* Arbitration lost errors */ + __u32 restarts; /* CAN controller re-starts */ +}; + +/* + * CAN netlink interface + */ +enum { + IFLA_CAN_UNSPEC, + IFLA_CAN_BITTIMING, + IFLA_CAN_BITTIMING_CONST, + IFLA_CAN_CLOCK, + IFLA_CAN_STATE, + IFLA_CAN_CTRLMODE, + IFLA_CAN_RESTART_MS, + IFLA_CAN_RESTART, + IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, + IFLA_CAN_TERMINATION, + IFLA_CAN_TERMINATION_CONST, + IFLA_CAN_BITRATE_CONST, + IFLA_CAN_DATA_BITRATE_CONST, + IFLA_CAN_BITRATE_MAX, + IFLA_CAN_TDC, + IFLA_CAN_CTRLMODE_EXT, + + /* add new constants above here */ + __IFLA_CAN_MAX, + IFLA_CAN_MAX = __IFLA_CAN_MAX - 1 +}; + +/* + * CAN FD Transmitter Delay Compensation (TDC) + * + * Please refer to struct can_tdc_const and can_tdc in + * include/linux/can/bittiming.h for further details. + */ +enum { + IFLA_CAN_TDC_UNSPEC, + IFLA_CAN_TDC_TDCV_MIN, /* u32 */ + IFLA_CAN_TDC_TDCV_MAX, /* u32 */ + IFLA_CAN_TDC_TDCO_MIN, /* u32 */ + IFLA_CAN_TDC_TDCO_MAX, /* u32 */ + IFLA_CAN_TDC_TDCF_MIN, /* u32 */ + IFLA_CAN_TDC_TDCF_MAX, /* u32 */ + IFLA_CAN_TDC_TDCV, /* u32 */ + IFLA_CAN_TDC_TDCO, /* u32 */ + IFLA_CAN_TDC_TDCF, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_TDC, + IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1 +}; + +/* + * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters + */ +enum { + IFLA_CAN_CTRLMODE_UNSPEC, + IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_CTRLMODE, + IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1 +}; + +/* u16 termination range: 1..65535 Ohms */ +#define CAN_TERMINATION_DISABLED 0 + +#endif /* !_UAPI_CAN_NETLINK_H */ diff --git a/include/uapi/linux/can/vxcan.h b/include/uapi/linux/can/vxcan.h new file mode 100644 index 0000000..3e3d2eb --- /dev/null +++ b/include/uapi/linux/can/vxcan.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +#ifndef _CAN_VXCAN_H +#define _CAN_VXCAN_H + +enum { + VXCAN_INFO_UNSPEC, + VXCAN_INFO_PEER, + + __VXCAN_INFO_MAX +#define VXCAN_INFO_MAX (__VXCAN_INFO_MAX - 1) +}; + +#endif diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h new file mode 100644 index 0000000..e48f039 --- /dev/null +++ b/include/uapi/linux/capability.h @@ -0,0 +1,431 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * This is <linux/capability.h> + * + * Andrew G. Morgan <morgan@kernel.org> + * Alexander Kjeldaas <astor@guardian.no> + * with help from Aleph1, Roland Buresund and Andrew Main. + * + * See here for the libcap library ("POSIX draft" compliance): + * + * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ + */ + +#ifndef _LINUX_CAPABILITY_H +#define _LINUX_CAPABILITY_H + +#include <linux/types.h> + +/* User-level do most of the mapping between kernel and user + capabilities based on the version tag given by the kernel. The + kernel might be somewhat backwards compatible, but don't bet on + it. */ + +/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to + a set of three capability sets. The transposition of 3*the + following structure to such a composite is better handled in a user + library since the draft standard requires the use of malloc/free + etc.. */ + +#define _LINUX_CAPABILITY_VERSION_1 0x19980330 +#define _LINUX_CAPABILITY_U32S_1 1 + +#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ +#define _LINUX_CAPABILITY_U32S_2 2 + +#define _LINUX_CAPABILITY_VERSION_3 0x20080522 +#define _LINUX_CAPABILITY_U32S_3 2 + +typedef struct __user_cap_header_struct { + __u32 version; + int pid; +} *cap_user_header_t; + +struct __user_cap_data_struct { + __u32 effective; + __u32 permitted; + __u32 inheritable; +}; +typedef struct __user_cap_data_struct *cap_user_data_t; + + +#define VFS_CAP_REVISION_MASK 0xFF000000 +#define VFS_CAP_REVISION_SHIFT 24 +#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK +#define VFS_CAP_FLAGS_EFFECTIVE 0x000001 + +#define VFS_CAP_REVISION_1 0x01000000 +#define VFS_CAP_U32_1 1 +#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1)) + +#define VFS_CAP_REVISION_2 0x02000000 +#define VFS_CAP_U32_2 2 +#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2)) + +#define VFS_CAP_REVISION_3 0x03000000 +#define VFS_CAP_U32_3 2 +#define XATTR_CAPS_SZ_3 (sizeof(__le32)*(2 + 2*VFS_CAP_U32_3)) + +#define XATTR_CAPS_SZ XATTR_CAPS_SZ_3 +#define VFS_CAP_U32 VFS_CAP_U32_3 +#define VFS_CAP_REVISION VFS_CAP_REVISION_3 + +struct vfs_cap_data { + __le32 magic_etc; /* Little endian */ + struct { + __le32 permitted; /* Little endian */ + __le32 inheritable; /* Little endian */ + } data[VFS_CAP_U32]; +}; + +/* + * same as vfs_cap_data but with a rootid at the end + */ +struct vfs_ns_cap_data { + __le32 magic_etc; + struct { + __le32 permitted; /* Little endian */ + __le32 inheritable; /* Little endian */ + } data[VFS_CAP_U32]; + __le32 rootid; +}; + + +/* + * Backwardly compatible definition for source code - trapped in a + * 32-bit world. If you find you need this, please consider using + * libcap to untrap yourself... + */ +#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 +#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 + + + +/** + ** POSIX-draft defined capabilities. + **/ + +/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this + overrides the restriction of changing file ownership and group + ownership. */ + +#define CAP_CHOWN 0 + +/* Override all DAC access, including ACL execute access if + [_POSIX_ACL] is defined. Excluding DAC access covered by + CAP_LINUX_IMMUTABLE. */ + +#define CAP_DAC_OVERRIDE 1 + +/* Overrides all DAC restrictions regarding read and search on files + and directories, including ACL restrictions if [_POSIX_ACL] is + defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */ + +#define CAP_DAC_READ_SEARCH 2 + +/* Overrides all restrictions about allowed operations on files, where + file owner ID must be equal to the user ID, except where CAP_FSETID + is applicable. It doesn't override MAC and DAC restrictions. */ + +#define CAP_FOWNER 3 + +/* Overrides the following restrictions that the effective user ID + shall match the file owner ID when setting the S_ISUID and S_ISGID + bits on that file; that the effective group ID (or one of the + supplementary group IDs) shall match the file owner ID when setting + the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are + cleared on successful return from chown(2) (not implemented). */ + +#define CAP_FSETID 4 + +/* Overrides the restriction that the real or effective user ID of a + process sending a signal must match the real or effective user ID + of the process receiving the signal. */ + +#define CAP_KILL 5 + +/* Allows setgid(2) manipulation */ +/* Allows setgroups(2) */ +/* Allows forged gids on socket credentials passing. */ + +#define CAP_SETGID 6 + +/* Allows set*uid(2) manipulation (including fsuid). */ +/* Allows forged pids on socket credentials passing. */ + +#define CAP_SETUID 7 + + +/** + ** Linux-specific capabilities + **/ + +/* Without VFS support for capabilities: + * Transfer any capability in your permitted set to any pid, + * remove any capability in your permitted set from any pid + * With VFS support for capabilities (neither of above, but) + * Add any capability from current's capability bounding set + * to the current process' inheritable set + * Allow taking bits out of capability bounding set + * Allow modification of the securebits for a process + */ + +#define CAP_SETPCAP 8 + +/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */ + +#define CAP_LINUX_IMMUTABLE 9 + +/* Allows binding to TCP/UDP sockets below 1024 */ +/* Allows binding to ATM VCIs below 32 */ + +#define CAP_NET_BIND_SERVICE 10 + +/* Allow broadcasting, listen to multicast */ + +#define CAP_NET_BROADCAST 11 + +/* Allow interface configuration */ +/* Allow administration of IP firewall, masquerading and accounting */ +/* Allow setting debug option on sockets */ +/* Allow modification of routing tables */ +/* Allow setting arbitrary process / process group ownership on + sockets */ +/* Allow binding to any address for transparent proxying (also via NET_RAW) */ +/* Allow setting TOS (type of service) */ +/* Allow setting promiscuous mode */ +/* Allow clearing driver statistics */ +/* Allow multicasting */ +/* Allow read/write of device-specific registers */ +/* Allow activation of ATM control sockets */ + +#define CAP_NET_ADMIN 12 + +/* Allow use of RAW sockets */ +/* Allow use of PACKET sockets */ +/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ + +#define CAP_NET_RAW 13 + +/* Allow locking of shared memory segments */ +/* Allow mlock and mlockall (which doesn't really have anything to do + with IPC) */ + +#define CAP_IPC_LOCK 14 + +/* Override IPC ownership checks */ + +#define CAP_IPC_OWNER 15 + +/* Insert and remove kernel modules - modify kernel without limit */ +#define CAP_SYS_MODULE 16 + +/* Allow ioperm/iopl access */ +/* Allow sending USB messages to any device via /dev/bus/usb */ + +#define CAP_SYS_RAWIO 17 + +/* Allow use of chroot() */ + +#define CAP_SYS_CHROOT 18 + +/* Allow ptrace() of any process */ + +#define CAP_SYS_PTRACE 19 + +/* Allow configuration of process accounting */ + +#define CAP_SYS_PACCT 20 + +/* Allow configuration of the secure attention key */ +/* Allow administration of the random device */ +/* Allow examination and configuration of disk quotas */ +/* Allow setting the domainname */ +/* Allow setting the hostname */ +/* Allow mount() and umount(), setting up new smb connection */ +/* Allow some autofs root ioctls */ +/* Allow nfsservctl */ +/* Allow VM86_REQUEST_IRQ */ +/* Allow to read/write pci config on alpha */ +/* Allow irix_prctl on mips (setstacksize) */ +/* Allow flushing all cache on m68k (sys_cacheflush) */ +/* Allow removing semaphores */ +/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores + and shared memory */ +/* Allow locking/unlocking of shared memory segment */ +/* Allow turning swap on/off */ +/* Allow forged pids on socket credentials passing */ +/* Allow setting readahead and flushing buffers on block devices */ +/* Allow setting geometry in floppy driver */ +/* Allow turning DMA on/off in xd driver */ +/* Allow administration of md devices (mostly the above, but some + extra ioctls) */ +/* Allow tuning the ide driver */ +/* Allow access to the nvram device */ +/* Allow administration of apm_bios, serial and bttv (TV) device */ +/* Allow manufacturer commands in isdn CAPI support driver */ +/* Allow reading non-standardized portions of pci configuration space */ +/* Allow DDI debug ioctl on sbpcd driver */ +/* Allow setting up serial ports */ +/* Allow sending raw qic-117 commands */ +/* Allow enabling/disabling tagged queuing on SCSI controllers and sending + arbitrary SCSI commands */ +/* Allow setting encryption key on loopback filesystem */ +/* Allow setting zone reclaim policy */ +/* Allow everything under CAP_BPF and CAP_PERFMON for backward compatibility */ + +#define CAP_SYS_ADMIN 21 + +/* Allow use of reboot() */ + +#define CAP_SYS_BOOT 22 + +/* Allow raising priority and setting priority on other (different + UID) processes */ +/* Allow use of FIFO and round-robin (realtime) scheduling on own + processes and setting the scheduling algorithm used by another + process. */ +/* Allow setting cpu affinity on other processes */ +/* Allow setting realtime ioprio class */ +/* Allow setting ioprio class on other processes */ + +#define CAP_SYS_NICE 23 + +/* Override resource limits. Set resource limits. */ +/* Override quota limits. */ +/* Override reserved space on ext2 filesystem */ +/* Modify data journaling mode on ext3 filesystem (uses journaling + resources) */ +/* NOTE: ext2 honors fsuid when checking for resource overrides, so + you can override using fsuid too */ +/* Override size restrictions on IPC message queues */ +/* Allow more than 64hz interrupts from the real-time clock */ +/* Override max number of consoles on console allocation */ +/* Override max number of keymaps */ +/* Control memory reclaim behavior */ + +#define CAP_SYS_RESOURCE 24 + +/* Allow manipulation of system clock */ +/* Allow irix_stime on mips */ +/* Allow setting the real-time clock */ + +#define CAP_SYS_TIME 25 + +/* Allow configuration of tty devices */ +/* Allow vhangup() of tty */ + +#define CAP_SYS_TTY_CONFIG 26 + +/* Allow the privileged aspects of mknod() */ + +#define CAP_MKNOD 27 + +/* Allow taking of leases on files */ + +#define CAP_LEASE 28 + +/* Allow writing the audit log via unicast netlink socket */ + +#define CAP_AUDIT_WRITE 29 + +/* Allow configuration of audit via unicast netlink socket */ + +#define CAP_AUDIT_CONTROL 30 + +/* Set or remove capabilities on files. + Map uid=0 into a child user namespace. */ + +#define CAP_SETFCAP 31 + +/* Override MAC access. + The base kernel enforces no MAC policy. + An LSM may enforce a MAC policy, and if it does and it chooses + to implement capability based overrides of that policy, this is + the capability it should use to do so. */ + +#define CAP_MAC_OVERRIDE 32 + +/* Allow MAC configuration or state changes. + The base kernel requires no MAC configuration. + An LSM may enforce a MAC policy, and if it does and it chooses + to implement capability based checks on modifications to that + policy or the data required to maintain it, this is the + capability it should use to do so. */ + +#define CAP_MAC_ADMIN 33 + +/* Allow configuring the kernel's syslog (printk behaviour) */ + +#define CAP_SYSLOG 34 + +/* Allow triggering something that will wake the system */ + +#define CAP_WAKE_ALARM 35 + +/* Allow preventing system suspends */ + +#define CAP_BLOCK_SUSPEND 36 + +/* Allow reading the audit log via multicast netlink socket */ + +#define CAP_AUDIT_READ 37 + +/* + * Allow system performance and observability privileged operations + * using perf_events, i915_perf and other kernel subsystems + */ + +#define CAP_PERFMON 38 + +/* + * CAP_BPF allows the following BPF operations: + * - Creating all types of BPF maps + * - Advanced verifier features + * - Indirect variable access + * - Bounded loops + * - BPF to BPF function calls + * - Scalar precision tracking + * - Larger complexity limits + * - Dead code elimination + * - And potentially other features + * - Loading BPF Type Format (BTF) data + * - Retrieve xlated and JITed code of BPF programs + * - Use bpf_spin_lock() helper + * + * CAP_PERFMON relaxes the verifier checks further: + * - BPF progs can use of pointer-to-integer conversions + * - speculation attack hardening measures are bypassed + * - bpf_probe_read to read arbitrary kernel memory is allowed + * - bpf_trace_printk to print kernel memory is allowed + * + * CAP_SYS_ADMIN is required to use bpf_probe_write_user. + * + * CAP_SYS_ADMIN is required to iterate system wide loaded + * programs, maps, links, BTFs and convert their IDs to file descriptors. + * + * CAP_PERFMON and CAP_BPF are required to load tracing programs. + * CAP_NET_ADMIN and CAP_BPF are required to load networking programs. + */ +#define CAP_BPF 39 + + +/* Allow checkpoint/restore related operations */ +/* Allow PID selection during clone3() */ +/* Allow writing to ns_last_pid */ + +#define CAP_CHECKPOINT_RESTORE 40 + +#define CAP_LAST_CAP CAP_CHECKPOINT_RESTORE + +#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) + +/* + * Bit location of each capability (used by user-space library and kernel) + */ + +#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ +#define CAP_TO_MASK(x) (1U << ((x) & 31)) /* mask for indexed __u32 */ + + +#endif /* _LINUX_CAPABILITY_H */ diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h new file mode 100644 index 0000000..1eb84b5 --- /dev/null +++ b/include/uapi/linux/const.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* const.h: Macros for dealing with constants. */ + +#ifndef _LINUX_CONST_H +#define _LINUX_CONST_H + +/* Some constant macros are used in both assembler and + * C code. Therefore we cannot annotate them always with + * 'UL' and other type specifiers unilaterally. We + * use the following macros to deal with this. + * + * Similarly, _AT() will cast an expression with a type in C, but + * leave it unchanged in asm. + */ + +#ifdef __ASSEMBLY__ +#define _AC(X,Y) X +#define _AT(T,X) X +#else +#define __AC(X,Y) (X##Y) +#define _AC(X,Y) __AC(X,Y) +#define _AT(T,X) ((T)(X)) +#endif + +#define _UL(x) (_AC(x, UL)) +#define _ULL(x) (_AC(x, ULL)) + +#define _BITUL(x) (_UL(1) << (x)) +#define _BITULL(x) (_ULL(1) << (x)) + +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) +#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) + +#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + +#endif /* _LINUX_CONST_H */ diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h new file mode 100644 index 0000000..7e15214 --- /dev/null +++ b/include/uapi/linux/dcbnl.h @@ -0,0 +1,779 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2008-2011, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Lucy Liu <lucy.liu@intel.com> + */ + +#ifndef __LINUX_DCBNL_H__ +#define __LINUX_DCBNL_H__ + +#include <linux/types.h> + +/* IEEE 802.1Qaz std supported values */ +#define IEEE_8021QAZ_MAX_TCS 8 + +#define IEEE_8021QAZ_TSA_STRICT 0 +#define IEEE_8021QAZ_TSA_CB_SHAPER 1 +#define IEEE_8021QAZ_TSA_ETS 2 +#define IEEE_8021QAZ_TSA_VENDOR 255 + +/* This structure contains the IEEE 802.1Qaz ETS managed object + * + * @willing: willing bit in ETS configuration TLV + * @ets_cap: indicates supported capacity of ets feature + * @cbs: credit based shaper ets algorithm supported + * @tc_tx_bw: tc tx bandwidth indexed by traffic class + * @tc_rx_bw: tc rx bandwidth indexed by traffic class + * @tc_tsa: TSA Assignment table, indexed by traffic class + * @prio_tc: priority assignment table mapping 8021Qp to traffic class + * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV + * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV + * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV + * + * Recommended values are used to set fields in the ETS recommendation TLV + * with hardware offloaded LLDP. + * + * ---- + * TSA Assignment 8 bit identifiers + * 0 strict priority + * 1 credit-based shaper + * 2 enhanced transmission selection + * 3-254 reserved + * 255 vendor specific + */ +struct ieee_ets { + __u8 willing; + __u8 ets_cap; + __u8 cbs; + __u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS]; + __u8 tc_rx_bw[IEEE_8021QAZ_MAX_TCS]; + __u8 tc_tsa[IEEE_8021QAZ_MAX_TCS]; + __u8 prio_tc[IEEE_8021QAZ_MAX_TCS]; + __u8 tc_reco_bw[IEEE_8021QAZ_MAX_TCS]; + __u8 tc_reco_tsa[IEEE_8021QAZ_MAX_TCS]; + __u8 reco_prio_tc[IEEE_8021QAZ_MAX_TCS]; +}; + +/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS + * managed object. + * Values are 64 bits long and specified in Kbps to enable usage over both + * slow and very fast networks. + * + * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class + */ +struct ieee_maxrate { + __u64 tc_maxrate[IEEE_8021QAZ_MAX_TCS]; +}; + +enum dcbnl_cndd_states { + DCB_CNDD_RESET = 0, + DCB_CNDD_EDGE, + DCB_CNDD_INTERIOR, + DCB_CNDD_INTERIOR_READY, +}; + +/* This structure contains the IEEE 802.1Qau QCN managed object. + * + *@rpg_enable: enable QCN RP + *@rppp_max_rps: maximum number of RPs allowed for this CNPV on this port + *@rpg_time_reset: time between rate increases if no CNMs received. + * given in u-seconds + *@rpg_byte_reset: transmitted data between rate increases if no CNMs received. + * given in Bytes + *@rpg_threshold: The number of times rpByteStage or rpTimeStage can count + * before RP rate control state machine advances states + *@rpg_max_rate: the maxinun rate, in Mbits per second, + * at which an RP can transmit + *@rpg_ai_rate: The rate, in Mbits per second, + * used to increase rpTargetRate in the RPR_ACTIVE_INCREASE + *@rpg_hai_rate: The rate, in Mbits per second, + * used to increase rpTargetRate in the RPR_HYPER_INCREASE state + *@rpg_gd: Upon CNM receive, flow rate is limited to (Fb/Gd)*CurrentRate. + * rpgGd is given as log2(Gd), where Gd may only be powers of 2 + *@rpg_min_dec_fac: The minimum factor by which the current transmit rate + * can be changed by reception of a CNM. + * value is given as percentage (1-100) + *@rpg_min_rate: The minimum value, in bits per second, for rate to limit + *@cndd_state_machine: The state of the congestion notification domain + * defense state machine, as defined by IEEE 802.3Qau + * section 32.1.1. In the interior ready state, + * the QCN capable hardware may add CN-TAG TLV to the + * outgoing traffic, to specifically identify outgoing + * flows. + */ + +struct ieee_qcn { + __u8 rpg_enable[IEEE_8021QAZ_MAX_TCS]; + __u32 rppp_max_rps[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_time_reset[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_byte_reset[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_threshold[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_max_rate[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_ai_rate[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_hai_rate[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_gd[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_min_dec_fac[IEEE_8021QAZ_MAX_TCS]; + __u32 rpg_min_rate[IEEE_8021QAZ_MAX_TCS]; + __u32 cndd_state_machine[IEEE_8021QAZ_MAX_TCS]; +}; + +/* This structure contains the IEEE 802.1Qau QCN statistics. + * + *@rppp_rp_centiseconds: the number of RP-centiseconds accumulated + * by RPs at this priority level on this Port + *@rppp_created_rps: number of active RPs(flows) that react to CNMs + */ + +struct ieee_qcn_stats { + __u64 rppp_rp_centiseconds[IEEE_8021QAZ_MAX_TCS]; + __u32 rppp_created_rps[IEEE_8021QAZ_MAX_TCS]; +}; + +/* This structure contains the IEEE 802.1Qaz PFC managed object + * + * @pfc_cap: Indicates the number of traffic classes on the local device + * that may simultaneously have PFC enabled. + * @pfc_en: bitmap indicating pfc enabled traffic classes + * @mbc: enable macsec bypass capability + * @delay: the allowance made for a round-trip propagation delay of the + * link in bits. + * @requests: count of the sent pfc frames + * @indications: count of the received pfc frames + */ +struct ieee_pfc { + __u8 pfc_cap; + __u8 pfc_en; + __u8 mbc; + __u16 delay; + __u64 requests[IEEE_8021QAZ_MAX_TCS]; + __u64 indications[IEEE_8021QAZ_MAX_TCS]; +}; + +#define IEEE_8021Q_MAX_PRIORITIES 8 +#define DCBX_MAX_BUFFERS 8 +struct dcbnl_buffer { + /* priority to buffer mapping */ + __u8 prio2buffer[IEEE_8021Q_MAX_PRIORITIES]; + /* buffer size in Bytes */ + __u32 buffer_size[DCBX_MAX_BUFFERS]; + __u32 total_size; +}; + +/* CEE DCBX std supported values */ +#define CEE_DCBX_MAX_PGS 8 +#define CEE_DCBX_MAX_PRIO 8 + +/** + * struct cee_pg - CEE Priority-Group managed object + * + * @willing: willing bit in the PG tlv + * @error: error bit in the PG tlv + * @pg_en: enable bit of the PG feature + * @tcs_supported: number of traffic classes supported + * @pg_bw: bandwidth percentage for each priority group + * @prio_pg: priority to PG mapping indexed by priority + */ +struct cee_pg { + __u8 willing; + __u8 error; + __u8 pg_en; + __u8 tcs_supported; + __u8 pg_bw[CEE_DCBX_MAX_PGS]; + __u8 prio_pg[CEE_DCBX_MAX_PGS]; +}; + +/** + * struct cee_pfc - CEE PFC managed object + * + * @willing: willing bit in the PFC tlv + * @error: error bit in the PFC tlv + * @pfc_en: bitmap indicating pfc enabled traffic classes + * @tcs_supported: number of traffic classes supported + */ +struct cee_pfc { + __u8 willing; + __u8 error; + __u8 pfc_en; + __u8 tcs_supported; +}; + +/* IEEE 802.1Qaz std supported values */ +#define IEEE_8021QAZ_APP_SEL_ETHERTYPE 1 +#define IEEE_8021QAZ_APP_SEL_STREAM 2 +#define IEEE_8021QAZ_APP_SEL_DGRAM 3 +#define IEEE_8021QAZ_APP_SEL_ANY 4 +#define IEEE_8021QAZ_APP_SEL_DSCP 5 + +/* Non-std selector values */ +#define DCB_APP_SEL_PCP 255 + +/* This structure contains the IEEE 802.1Qaz APP managed object. This + * object is also used for the CEE std as well. + * + * @selector: protocol identifier type + * @protocol: protocol of type indicated + * @priority: 3-bit unsigned integer indicating priority for IEEE + * 8-bit 802.1p user priority bitmap for CEE + * + * ---- + * Selector field values for IEEE 802.1Qaz + * 0 Reserved + * 1 Ethertype + * 2 Well known port number over TCP or SCTP + * 3 Well known port number over UDP or DCCP + * 4 Well known port number over TCP, SCTP, UDP, or DCCP + * 5 Differentiated Services Code Point (DSCP) value + * 6-7 Reserved + * + * Selector field values for CEE + * 0 Ethertype + * 1 Well known port number over TCP or UDP + * 2-3 Reserved + */ +struct dcb_app { + __u8 selector; + __u8 priority; + __u16 protocol; +}; + +#define IEEE_8021QAZ_APP_SEL_MAX 255 + +/** + * struct dcb_peer_app_info - APP feature information sent by the peer + * + * @willing: willing bit in the peer APP tlv + * @error: error bit in the peer APP tlv + * + * In addition to this information the full peer APP tlv also contains + * a table of 'app_count' APP objects defined above. + */ +struct dcb_peer_app_info { + __u8 willing; + __u8 error; +}; + +struct dcbmsg { + __u8 dcb_family; + __u8 cmd; + __u16 dcb_pad; +}; + +/** + * enum dcbnl_commands - supported DCB commands + * + * @DCB_CMD_UNDEFINED: unspecified command to catch errors + * @DCB_CMD_GSTATE: request the state of DCB in the device + * @DCB_CMD_SSTATE: set the state of DCB in the device + * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx + * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx + * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx + * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx + * @DCB_CMD_PFC_GCFG: request the priority flow control configuration + * @DCB_CMD_PFC_SCFG: set the priority flow control configuration + * @DCB_CMD_SET_ALL: apply all changes to the underlying device + * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying + * device. Only useful when using bonding. + * @DCB_CMD_GCAP: request the DCB capabilities of the device + * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported + * @DCB_CMD_SNUMTCS: set the number of traffic classes + * @DCB_CMD_GBCN: set backward congestion notification configuration + * @DCB_CMD_SBCN: get backward congestion notification configuration. + * @DCB_CMD_GAPP: get application protocol configuration + * @DCB_CMD_SAPP: set application protocol configuration + * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration + * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration + * @DCB_CMD_GDCBX: get DCBX engine configuration + * @DCB_CMD_SDCBX: set DCBX engine configuration + * @DCB_CMD_GFEATCFG: get DCBX features flags + * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags + * @DCB_CMD_CEE_GET: get CEE aggregated configuration + * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration + */ +enum dcbnl_commands { + DCB_CMD_UNDEFINED, + + DCB_CMD_GSTATE, + DCB_CMD_SSTATE, + + DCB_CMD_PGTX_GCFG, + DCB_CMD_PGTX_SCFG, + DCB_CMD_PGRX_GCFG, + DCB_CMD_PGRX_SCFG, + + DCB_CMD_PFC_GCFG, + DCB_CMD_PFC_SCFG, + + DCB_CMD_SET_ALL, + + DCB_CMD_GPERM_HWADDR, + + DCB_CMD_GCAP, + + DCB_CMD_GNUMTCS, + DCB_CMD_SNUMTCS, + + DCB_CMD_PFC_GSTATE, + DCB_CMD_PFC_SSTATE, + + DCB_CMD_BCN_GCFG, + DCB_CMD_BCN_SCFG, + + DCB_CMD_GAPP, + DCB_CMD_SAPP, + + DCB_CMD_IEEE_SET, + DCB_CMD_IEEE_GET, + + DCB_CMD_GDCBX, + DCB_CMD_SDCBX, + + DCB_CMD_GFEATCFG, + DCB_CMD_SFEATCFG, + + DCB_CMD_CEE_GET, + DCB_CMD_IEEE_DEL, + + __DCB_CMD_ENUM_MAX, + DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_attrs - DCB top-level netlink attributes + * + * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING) + * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8) + * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8) + * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED) + * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8) + * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED) + * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8) + * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED) + * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED) + * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED) + * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED) + * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED) + * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8) + * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED) + * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED) + */ +enum dcbnl_attrs { + DCB_ATTR_UNDEFINED, + + DCB_ATTR_IFNAME, + DCB_ATTR_STATE, + DCB_ATTR_PFC_STATE, + DCB_ATTR_PFC_CFG, + DCB_ATTR_NUM_TC, + DCB_ATTR_PG_CFG, + DCB_ATTR_SET_ALL, + DCB_ATTR_PERM_HWADDR, + DCB_ATTR_CAP, + DCB_ATTR_NUMTCS, + DCB_ATTR_BCN, + DCB_ATTR_APP, + + /* IEEE std attributes */ + DCB_ATTR_IEEE, + + DCB_ATTR_DCBX, + DCB_ATTR_FEATCFG, + + /* CEE nested attributes */ + DCB_ATTR_CEE, + + __DCB_ATTR_ENUM_MAX, + DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1, +}; + +/** + * enum ieee_attrs - IEEE 802.1Qaz get/set attributes + * + * @DCB_ATTR_IEEE_UNSPEC: unspecified + * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration + * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration + * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration + * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only + * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only + * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only + * @DCB_ATTR_DCB_APP_TRUST_TABLE: selector trust table + * @DCB_ATTR_DCB_REWR_TABLE: rewrite configuration + */ +enum ieee_attrs { + DCB_ATTR_IEEE_UNSPEC, + DCB_ATTR_IEEE_ETS, + DCB_ATTR_IEEE_PFC, + DCB_ATTR_IEEE_APP_TABLE, + DCB_ATTR_IEEE_PEER_ETS, + DCB_ATTR_IEEE_PEER_PFC, + DCB_ATTR_IEEE_PEER_APP, + DCB_ATTR_IEEE_MAXRATE, + DCB_ATTR_IEEE_QCN, + DCB_ATTR_IEEE_QCN_STATS, + DCB_ATTR_DCB_BUFFER, + DCB_ATTR_DCB_APP_TRUST_TABLE, + DCB_ATTR_DCB_REWR_TABLE, + __DCB_ATTR_IEEE_MAX +}; +#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1) + +enum ieee_attrs_app { + DCB_ATTR_IEEE_APP_UNSPEC, + DCB_ATTR_IEEE_APP, + DCB_ATTR_DCB_APP, + __DCB_ATTR_IEEE_APP_MAX +}; +#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1) + +/** + * enum cee_attrs - CEE DCBX get attributes. + * + * @DCB_ATTR_CEE_UNSPEC: unspecified + * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only + * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only + * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only + * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG) + * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG) + * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG) + * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP) + * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG) + * + * An aggregated collection of the cee std negotiated parameters. + */ +enum cee_attrs { + DCB_ATTR_CEE_UNSPEC, + DCB_ATTR_CEE_PEER_PG, + DCB_ATTR_CEE_PEER_PFC, + DCB_ATTR_CEE_PEER_APP_TABLE, + DCB_ATTR_CEE_TX_PG, + DCB_ATTR_CEE_RX_PG, + DCB_ATTR_CEE_PFC, + DCB_ATTR_CEE_APP_TABLE, + DCB_ATTR_CEE_FEAT, + __DCB_ATTR_CEE_MAX +}; +#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1) + +enum peer_app_attr { + DCB_ATTR_CEE_PEER_APP_UNSPEC, + DCB_ATTR_CEE_PEER_APP_INFO, + DCB_ATTR_CEE_PEER_APP, + __DCB_ATTR_CEE_PEER_APP_MAX +}; +#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1) + +enum cee_attrs_app { + DCB_ATTR_CEE_APP_UNSPEC, + DCB_ATTR_CEE_APP, + __DCB_ATTR_CEE_APP_MAX +}; +#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1) + +/** + * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs + * + * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8) + * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8) + * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8) + * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8) + * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8) + * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8) + * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8) + * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8) + * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined + * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG) + * + */ +enum dcbnl_pfc_up_attrs { + DCB_PFC_UP_ATTR_UNDEFINED, + + DCB_PFC_UP_ATTR_0, + DCB_PFC_UP_ATTR_1, + DCB_PFC_UP_ATTR_2, + DCB_PFC_UP_ATTR_3, + DCB_PFC_UP_ATTR_4, + DCB_PFC_UP_ATTR_5, + DCB_PFC_UP_ATTR_6, + DCB_PFC_UP_ATTR_7, + DCB_PFC_UP_ATTR_ALL, + + __DCB_PFC_UP_ATTR_ENUM_MAX, + DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_pg_attrs - DCB Priority Group attributes + * + * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined + * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED) + * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined + * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG) + * + */ +enum dcbnl_pg_attrs { + DCB_PG_ATTR_UNDEFINED, + + DCB_PG_ATTR_TC_0, + DCB_PG_ATTR_TC_1, + DCB_PG_ATTR_TC_2, + DCB_PG_ATTR_TC_3, + DCB_PG_ATTR_TC_4, + DCB_PG_ATTR_TC_5, + DCB_PG_ATTR_TC_6, + DCB_PG_ATTR_TC_7, + DCB_PG_ATTR_TC_MAX, + DCB_PG_ATTR_TC_ALL, + + DCB_PG_ATTR_BW_ID_0, + DCB_PG_ATTR_BW_ID_1, + DCB_PG_ATTR_BW_ID_2, + DCB_PG_ATTR_BW_ID_3, + DCB_PG_ATTR_BW_ID_4, + DCB_PG_ATTR_BW_ID_5, + DCB_PG_ATTR_BW_ID_6, + DCB_PG_ATTR_BW_ID_7, + DCB_PG_ATTR_BW_ID_MAX, + DCB_PG_ATTR_BW_ID_ALL, + + __DCB_PG_ATTR_ENUM_MAX, + DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_tc_attrs - DCB Traffic Class attributes + * + * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors + * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to + * Valid values are: 0-7 + * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map + * Some devices may not support changing the + * user priority map of a TC. + * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting + * 0 - none + * 1 - group strict + * 2 - link strict + * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and + * not configured to use link strict priority, + * this is the percentage of bandwidth of the + * priority group this traffic class belongs to + * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters + * + */ +enum dcbnl_tc_attrs { + DCB_TC_ATTR_PARAM_UNDEFINED, + + DCB_TC_ATTR_PARAM_PGID, + DCB_TC_ATTR_PARAM_UP_MAPPING, + DCB_TC_ATTR_PARAM_STRICT_PRIO, + DCB_TC_ATTR_PARAM_BW_PCT, + DCB_TC_ATTR_PARAM_ALL, + + __DCB_TC_ATTR_PARAM_ENUM_MAX, + DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_cap_attrs - DCB Capability attributes + * + * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters + * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups + * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control + * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to + * traffic class mapping + * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a + * number of traffic classes the device + * can be configured to use for Priority Groups + * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a + * number of traffic classes the device can be + * configured to use for Priority Flow Control + * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority + * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion + * Notification + * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine + * + */ +enum dcbnl_cap_attrs { + DCB_CAP_ATTR_UNDEFINED, + DCB_CAP_ATTR_ALL, + DCB_CAP_ATTR_PG, + DCB_CAP_ATTR_PFC, + DCB_CAP_ATTR_UP2TC, + DCB_CAP_ATTR_PG_TCS, + DCB_CAP_ATTR_PFC_TCS, + DCB_CAP_ATTR_GSP, + DCB_CAP_ATTR_BCN, + DCB_CAP_ATTR_DCBX, + + __DCB_CAP_ATTR_ENUM_MAX, + DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1, +}; + +/** + * DCBX capability flags + * + * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent. + * 'set' routines are used to configure the device with + * the negotiated parameters + * + * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but + * by another entity + * 'get' routines are used to retrieve the + * negotiated parameters + * 'set' routines can be used to set the initial + * negotiation configuration + * + * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine + * supports the CEE protocol flavor + * + * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine + * supports the IEEE protocol flavor + * + * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine + * supports static configuration (i.e no actual + * negotiation is performed negotiated parameters equal + * the initial configuration) + * + */ +#define DCB_CAP_DCBX_HOST 0x01 +#define DCB_CAP_DCBX_LLD_MANAGED 0x02 +#define DCB_CAP_DCBX_VER_CEE 0x04 +#define DCB_CAP_DCBX_VER_IEEE 0x08 +#define DCB_CAP_DCBX_STATIC 0x10 + +/** + * enum dcbnl_numtcs_attrs - number of traffic classes + * + * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes + * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for + * priority groups + * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can + * support priority flow control + */ +enum dcbnl_numtcs_attrs { + DCB_NUMTCS_ATTR_UNDEFINED, + DCB_NUMTCS_ATTR_ALL, + DCB_NUMTCS_ATTR_PG, + DCB_NUMTCS_ATTR_PFC, + + __DCB_NUMTCS_ATTR_ENUM_MAX, + DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1, +}; + +enum dcbnl_bcn_attrs{ + DCB_BCN_ATTR_UNDEFINED = 0, + + DCB_BCN_ATTR_RP_0, + DCB_BCN_ATTR_RP_1, + DCB_BCN_ATTR_RP_2, + DCB_BCN_ATTR_RP_3, + DCB_BCN_ATTR_RP_4, + DCB_BCN_ATTR_RP_5, + DCB_BCN_ATTR_RP_6, + DCB_BCN_ATTR_RP_7, + DCB_BCN_ATTR_RP_ALL, + + DCB_BCN_ATTR_BCNA_0, + DCB_BCN_ATTR_BCNA_1, + DCB_BCN_ATTR_ALPHA, + DCB_BCN_ATTR_BETA, + DCB_BCN_ATTR_GD, + DCB_BCN_ATTR_GI, + DCB_BCN_ATTR_TMAX, + DCB_BCN_ATTR_TD, + DCB_BCN_ATTR_RMIN, + DCB_BCN_ATTR_W, + DCB_BCN_ATTR_RD, + DCB_BCN_ATTR_RU, + DCB_BCN_ATTR_WRTT, + DCB_BCN_ATTR_RI, + DCB_BCN_ATTR_C, + DCB_BCN_ATTR_ALL, + + __DCB_BCN_ATTR_ENUM_MAX, + DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcb_general_attr_values - general DCB attribute values + * + * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported + * + */ +enum dcb_general_attr_values { + DCB_ATTR_VALUE_UNDEFINED = 0xff +}; + +#define DCB_APP_IDTYPE_ETHTYPE 0x00 +#define DCB_APP_IDTYPE_PORTNUM 0x01 +enum dcbnl_app_attrs { + DCB_APP_ATTR_UNDEFINED, + + DCB_APP_ATTR_IDTYPE, + DCB_APP_ATTR_ID, + DCB_APP_ATTR_PRIORITY, + + __DCB_APP_ATTR_ENUM_MAX, + DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_featcfg_attrs - features conifiguration flags + * + * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes + * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups + * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority + * flow control + * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV + * + */ +#define DCB_FEATCFG_ERROR 0x01 /* error in feature resolution */ +#define DCB_FEATCFG_ENABLE 0x02 /* enable feature */ +#define DCB_FEATCFG_WILLING 0x04 /* feature is willing */ +#define DCB_FEATCFG_ADVERTISE 0x08 /* advertise feature */ +enum dcbnl_featcfg_attrs { + DCB_FEATCFG_ATTR_UNDEFINED, + DCB_FEATCFG_ATTR_ALL, + DCB_FEATCFG_ATTR_PG, + DCB_FEATCFG_ATTR_PFC, + DCB_FEATCFG_ATTR_APP, + + __DCB_FEATCFG_ATTR_ENUM_MAX, + DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1, +}; + +#endif /* __LINUX_DCBNL_H__ */ diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h new file mode 100644 index 0000000..e771701 --- /dev/null +++ b/include/uapi/linux/devlink.h @@ -0,0 +1,709 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * include/uapi/linux/devlink.h - Network physical device Netlink interface + * Copyright (c) 2016 Mellanox Technologies. All rights reserved. + * Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_DEVLINK_H_ +#define _LINUX_DEVLINK_H_ + +#include <linux/const.h> + +#define DEVLINK_GENL_NAME "devlink" +#define DEVLINK_GENL_VERSION 0x1 +#define DEVLINK_GENL_MCGRP_CONFIG_NAME "config" + +enum devlink_command { + /* don't change the order or add anything between, this is ABI! */ + DEVLINK_CMD_UNSPEC, + + DEVLINK_CMD_GET, /* can dump */ + DEVLINK_CMD_SET, + DEVLINK_CMD_NEW, + DEVLINK_CMD_DEL, + + DEVLINK_CMD_PORT_GET, /* can dump */ + DEVLINK_CMD_PORT_SET, + DEVLINK_CMD_PORT_NEW, + DEVLINK_CMD_PORT_DEL, + + DEVLINK_CMD_PORT_SPLIT, + DEVLINK_CMD_PORT_UNSPLIT, + + DEVLINK_CMD_SB_GET, /* can dump */ + DEVLINK_CMD_SB_SET, + DEVLINK_CMD_SB_NEW, + DEVLINK_CMD_SB_DEL, + + DEVLINK_CMD_SB_POOL_GET, /* can dump */ + DEVLINK_CMD_SB_POOL_SET, + DEVLINK_CMD_SB_POOL_NEW, + DEVLINK_CMD_SB_POOL_DEL, + + DEVLINK_CMD_SB_PORT_POOL_GET, /* can dump */ + DEVLINK_CMD_SB_PORT_POOL_SET, + DEVLINK_CMD_SB_PORT_POOL_NEW, + DEVLINK_CMD_SB_PORT_POOL_DEL, + + DEVLINK_CMD_SB_TC_POOL_BIND_GET, /* can dump */ + DEVLINK_CMD_SB_TC_POOL_BIND_SET, + DEVLINK_CMD_SB_TC_POOL_BIND_NEW, + DEVLINK_CMD_SB_TC_POOL_BIND_DEL, + + /* Shared buffer occupancy monitoring commands */ + DEVLINK_CMD_SB_OCC_SNAPSHOT, + DEVLINK_CMD_SB_OCC_MAX_CLEAR, + + DEVLINK_CMD_ESWITCH_GET, +#define DEVLINK_CMD_ESWITCH_MODE_GET /* obsolete, never use this! */ \ + DEVLINK_CMD_ESWITCH_GET + + DEVLINK_CMD_ESWITCH_SET, +#define DEVLINK_CMD_ESWITCH_MODE_SET /* obsolete, never use this! */ \ + DEVLINK_CMD_ESWITCH_SET + + DEVLINK_CMD_DPIPE_TABLE_GET, + DEVLINK_CMD_DPIPE_ENTRIES_GET, + DEVLINK_CMD_DPIPE_HEADERS_GET, + DEVLINK_CMD_DPIPE_TABLE_COUNTERS_SET, + DEVLINK_CMD_RESOURCE_SET, + DEVLINK_CMD_RESOURCE_DUMP, + + /* Hot driver reload, makes configuration changes take place. The + * devlink instance is not released during the process. + */ + DEVLINK_CMD_RELOAD, + + DEVLINK_CMD_PARAM_GET, /* can dump */ + DEVLINK_CMD_PARAM_SET, + DEVLINK_CMD_PARAM_NEW, + DEVLINK_CMD_PARAM_DEL, + + DEVLINK_CMD_REGION_GET, + DEVLINK_CMD_REGION_SET, + DEVLINK_CMD_REGION_NEW, + DEVLINK_CMD_REGION_DEL, + DEVLINK_CMD_REGION_READ, + + DEVLINK_CMD_PORT_PARAM_GET, /* can dump */ + DEVLINK_CMD_PORT_PARAM_SET, + DEVLINK_CMD_PORT_PARAM_NEW, + DEVLINK_CMD_PORT_PARAM_DEL, + + DEVLINK_CMD_INFO_GET, /* can dump */ + + DEVLINK_CMD_HEALTH_REPORTER_GET, + DEVLINK_CMD_HEALTH_REPORTER_SET, + DEVLINK_CMD_HEALTH_REPORTER_RECOVER, + DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE, + DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET, + DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR, + + DEVLINK_CMD_FLASH_UPDATE, + DEVLINK_CMD_FLASH_UPDATE_END, /* notification only */ + DEVLINK_CMD_FLASH_UPDATE_STATUS, /* notification only */ + + DEVLINK_CMD_TRAP_GET, /* can dump */ + DEVLINK_CMD_TRAP_SET, + DEVLINK_CMD_TRAP_NEW, + DEVLINK_CMD_TRAP_DEL, + + DEVLINK_CMD_TRAP_GROUP_GET, /* can dump */ + DEVLINK_CMD_TRAP_GROUP_SET, + DEVLINK_CMD_TRAP_GROUP_NEW, + DEVLINK_CMD_TRAP_GROUP_DEL, + + DEVLINK_CMD_TRAP_POLICER_GET, /* can dump */ + DEVLINK_CMD_TRAP_POLICER_SET, + DEVLINK_CMD_TRAP_POLICER_NEW, + DEVLINK_CMD_TRAP_POLICER_DEL, + + DEVLINK_CMD_HEALTH_REPORTER_TEST, + + DEVLINK_CMD_RATE_GET, /* can dump */ + DEVLINK_CMD_RATE_SET, + DEVLINK_CMD_RATE_NEW, + DEVLINK_CMD_RATE_DEL, + + DEVLINK_CMD_LINECARD_GET, /* can dump */ + DEVLINK_CMD_LINECARD_SET, + DEVLINK_CMD_LINECARD_NEW, + DEVLINK_CMD_LINECARD_DEL, + + DEVLINK_CMD_SELFTESTS_GET, /* can dump */ + DEVLINK_CMD_SELFTESTS_RUN, + + DEVLINK_CMD_NOTIFY_FILTER_SET, + + /* add new commands above here */ + __DEVLINK_CMD_MAX, + DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 +}; + +enum devlink_port_type { + DEVLINK_PORT_TYPE_NOTSET, + DEVLINK_PORT_TYPE_AUTO, + DEVLINK_PORT_TYPE_ETH, + DEVLINK_PORT_TYPE_IB, +}; + +enum devlink_sb_pool_type { + DEVLINK_SB_POOL_TYPE_INGRESS, + DEVLINK_SB_POOL_TYPE_EGRESS, +}; + +/* static threshold - limiting the maximum number of bytes. + * dynamic threshold - limiting the maximum number of bytes + * based on the currently available free space in the shared buffer pool. + * In this mode, the maximum quota is calculated based + * on the following formula: + * max_quota = alpha / (1 + alpha) * Free_Buffer + * While Free_Buffer is the amount of none-occupied buffer associated to + * the relevant pool. + * The value range which can be passed is 0-20 and serves + * for computation of alpha by following formula: + * alpha = 2 ^ (passed_value - 10) + */ + +enum devlink_sb_threshold_type { + DEVLINK_SB_THRESHOLD_TYPE_STATIC, + DEVLINK_SB_THRESHOLD_TYPE_DYNAMIC, +}; + +#define DEVLINK_SB_THRESHOLD_TO_ALPHA_MAX 20 + +enum devlink_eswitch_mode { + DEVLINK_ESWITCH_MODE_LEGACY, + DEVLINK_ESWITCH_MODE_SWITCHDEV, +}; + +enum devlink_eswitch_inline_mode { + DEVLINK_ESWITCH_INLINE_MODE_NONE, + DEVLINK_ESWITCH_INLINE_MODE_LINK, + DEVLINK_ESWITCH_INLINE_MODE_NETWORK, + DEVLINK_ESWITCH_INLINE_MODE_TRANSPORT, +}; + +enum devlink_eswitch_encap_mode { + DEVLINK_ESWITCH_ENCAP_MODE_NONE, + DEVLINK_ESWITCH_ENCAP_MODE_BASIC, +}; + +enum devlink_port_flavour { + DEVLINK_PORT_FLAVOUR_PHYSICAL, /* Any kind of a port physically + * facing the user. + */ + DEVLINK_PORT_FLAVOUR_CPU, /* CPU port */ + DEVLINK_PORT_FLAVOUR_DSA, /* Distributed switch architecture + * interconnect port. + */ + DEVLINK_PORT_FLAVOUR_PCI_PF, /* Represents eswitch port for + * the PCI PF. It is an internal + * port that faces the PCI PF. + */ + DEVLINK_PORT_FLAVOUR_PCI_VF, /* Represents eswitch port + * for the PCI VF. It is an internal + * port that faces the PCI VF. + */ + DEVLINK_PORT_FLAVOUR_VIRTUAL, /* Any virtual port facing the user. */ + DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but + * is not used in any way. + */ + DEVLINK_PORT_FLAVOUR_PCI_SF, /* Represents eswitch port + * for the PCI SF. It is an internal + * port that faces the PCI SF. + */ +}; + +enum devlink_rate_type { + DEVLINK_RATE_TYPE_LEAF, + DEVLINK_RATE_TYPE_NODE, +}; + +enum devlink_param_cmode { + DEVLINK_PARAM_CMODE_RUNTIME, + DEVLINK_PARAM_CMODE_DRIVERINIT, + DEVLINK_PARAM_CMODE_PERMANENT, + + /* Add new configuration modes above */ + __DEVLINK_PARAM_CMODE_MAX, + DEVLINK_PARAM_CMODE_MAX = __DEVLINK_PARAM_CMODE_MAX - 1 +}; + +enum devlink_param_fw_load_policy_value { + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER, + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH, + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DISK, + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_UNKNOWN, +}; + +enum devlink_param_reset_dev_on_drv_probe_value { + DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_UNKNOWN, + DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_ALWAYS, + DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_NEVER, + DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_DISK, +}; + +enum { + DEVLINK_ATTR_STATS_RX_PACKETS, /* u64 */ + DEVLINK_ATTR_STATS_RX_BYTES, /* u64 */ + DEVLINK_ATTR_STATS_RX_DROPPED, /* u64 */ + + __DEVLINK_ATTR_STATS_MAX, + DEVLINK_ATTR_STATS_MAX = __DEVLINK_ATTR_STATS_MAX - 1 +}; + +/* Specify what sections of a flash component can be overwritten when + * performing an update. Overwriting of firmware binary sections is always + * implicitly assumed to be allowed. + * + * Each section must be documented in + * Documentation/networking/devlink/devlink-flash.rst + * + */ +enum devlink_flash_overwrite { + DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT, + DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT, + + __DEVLINK_FLASH_OVERWRITE_MAX_BIT, + DEVLINK_FLASH_OVERWRITE_MAX_BIT = __DEVLINK_FLASH_OVERWRITE_MAX_BIT - 1 +}; + +#define DEVLINK_FLASH_OVERWRITE_SETTINGS _BITUL(DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT) +#define DEVLINK_FLASH_OVERWRITE_IDENTIFIERS _BITUL(DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT) + +#define DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS \ + (_BITUL(__DEVLINK_FLASH_OVERWRITE_MAX_BIT) - 1) + +enum devlink_attr_selftest_id { + DEVLINK_ATTR_SELFTEST_ID_UNSPEC, + DEVLINK_ATTR_SELFTEST_ID_FLASH, /* flag */ + + __DEVLINK_ATTR_SELFTEST_ID_MAX, + DEVLINK_ATTR_SELFTEST_ID_MAX = __DEVLINK_ATTR_SELFTEST_ID_MAX - 1 +}; + +enum devlink_selftest_status { + DEVLINK_SELFTEST_STATUS_SKIP, + DEVLINK_SELFTEST_STATUS_PASS, + DEVLINK_SELFTEST_STATUS_FAIL +}; + +enum devlink_attr_selftest_result { + DEVLINK_ATTR_SELFTEST_RESULT_UNSPEC, + DEVLINK_ATTR_SELFTEST_RESULT, /* nested */ + DEVLINK_ATTR_SELFTEST_RESULT_ID, /* u32, enum devlink_attr_selftest_id */ + DEVLINK_ATTR_SELFTEST_RESULT_STATUS, /* u8, enum devlink_selftest_status */ + + __DEVLINK_ATTR_SELFTEST_RESULT_MAX, + DEVLINK_ATTR_SELFTEST_RESULT_MAX = __DEVLINK_ATTR_SELFTEST_RESULT_MAX - 1 +}; + +/** + * enum devlink_trap_action - Packet trap action. + * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not + * sent to the CPU. + * @DEVLINK_TRAP_ACTION_TRAP: The sole copy of the packet is sent to the CPU. + * @DEVLINK_TRAP_ACTION_MIRROR: Packet is forwarded by the device and a copy is + * sent to the CPU. + */ +enum devlink_trap_action { + DEVLINK_TRAP_ACTION_DROP, + DEVLINK_TRAP_ACTION_TRAP, + DEVLINK_TRAP_ACTION_MIRROR, +}; + +/** + * enum devlink_trap_type - Packet trap type. + * @DEVLINK_TRAP_TYPE_DROP: Trap reason is a drop. Trapped packets are only + * processed by devlink and not injected to the + * kernel's Rx path. + * @DEVLINK_TRAP_TYPE_EXCEPTION: Trap reason is an exception. Packet was not + * forwarded as intended due to an exception + * (e.g., missing neighbour entry) and trapped to + * control plane for resolution. Trapped packets + * are processed by devlink and injected to + * the kernel's Rx path. + * @DEVLINK_TRAP_TYPE_CONTROL: Packet was trapped because it is required for + * the correct functioning of the control plane. + * For example, an ARP request packet. Trapped + * packets are injected to the kernel's Rx path, + * but not reported to drop monitor. + */ +enum devlink_trap_type { + DEVLINK_TRAP_TYPE_DROP, + DEVLINK_TRAP_TYPE_EXCEPTION, + DEVLINK_TRAP_TYPE_CONTROL, +}; + +enum { + /* Trap can report input port as metadata */ + DEVLINK_ATTR_TRAP_METADATA_TYPE_IN_PORT, + /* Trap can report flow action cookie as metadata */ + DEVLINK_ATTR_TRAP_METADATA_TYPE_FA_COOKIE, +}; + +enum devlink_reload_action { + DEVLINK_RELOAD_ACTION_UNSPEC, + DEVLINK_RELOAD_ACTION_DRIVER_REINIT, /* Driver entities re-instantiation */ + DEVLINK_RELOAD_ACTION_FW_ACTIVATE, /* FW activate */ + + /* Add new reload actions above */ + __DEVLINK_RELOAD_ACTION_MAX, + DEVLINK_RELOAD_ACTION_MAX = __DEVLINK_RELOAD_ACTION_MAX - 1 +}; + +enum devlink_reload_limit { + DEVLINK_RELOAD_LIMIT_UNSPEC, /* unspecified, no constraints */ + DEVLINK_RELOAD_LIMIT_NO_RESET, /* No reset allowed, no down time allowed, + * no link flap and no configuration is lost. + */ + + /* Add new reload limit above */ + __DEVLINK_RELOAD_LIMIT_MAX, + DEVLINK_RELOAD_LIMIT_MAX = __DEVLINK_RELOAD_LIMIT_MAX - 1 +}; + +#define DEVLINK_RELOAD_LIMITS_VALID_MASK (_BITUL(__DEVLINK_RELOAD_LIMIT_MAX) - 1) + +enum devlink_linecard_state { + DEVLINK_LINECARD_STATE_UNSPEC, + DEVLINK_LINECARD_STATE_UNPROVISIONED, + DEVLINK_LINECARD_STATE_UNPROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING_FAILED, + DEVLINK_LINECARD_STATE_PROVISIONED, + DEVLINK_LINECARD_STATE_ACTIVE, + + __DEVLINK_LINECARD_STATE_MAX, + DEVLINK_LINECARD_STATE_MAX = __DEVLINK_LINECARD_STATE_MAX - 1 +}; + +enum devlink_attr { + /* don't change the order or add anything between, this is ABI! */ + DEVLINK_ATTR_UNSPEC, + + /* bus name + dev name together are a handle for devlink entity */ + DEVLINK_ATTR_BUS_NAME, /* string */ + DEVLINK_ATTR_DEV_NAME, /* string */ + + DEVLINK_ATTR_PORT_INDEX, /* u32 */ + DEVLINK_ATTR_PORT_TYPE, /* u16 */ + DEVLINK_ATTR_PORT_DESIRED_TYPE, /* u16 */ + DEVLINK_ATTR_PORT_NETDEV_IFINDEX, /* u32 */ + DEVLINK_ATTR_PORT_NETDEV_NAME, /* string */ + DEVLINK_ATTR_PORT_IBDEV_NAME, /* string */ + DEVLINK_ATTR_PORT_SPLIT_COUNT, /* u32 */ + DEVLINK_ATTR_PORT_SPLIT_GROUP, /* u32 */ + DEVLINK_ATTR_SB_INDEX, /* u32 */ + DEVLINK_ATTR_SB_SIZE, /* u32 */ + DEVLINK_ATTR_SB_INGRESS_POOL_COUNT, /* u16 */ + DEVLINK_ATTR_SB_EGRESS_POOL_COUNT, /* u16 */ + DEVLINK_ATTR_SB_INGRESS_TC_COUNT, /* u16 */ + DEVLINK_ATTR_SB_EGRESS_TC_COUNT, /* u16 */ + DEVLINK_ATTR_SB_POOL_INDEX, /* u16 */ + DEVLINK_ATTR_SB_POOL_TYPE, /* u8 */ + DEVLINK_ATTR_SB_POOL_SIZE, /* u32 */ + DEVLINK_ATTR_SB_POOL_THRESHOLD_TYPE, /* u8 */ + DEVLINK_ATTR_SB_THRESHOLD, /* u32 */ + DEVLINK_ATTR_SB_TC_INDEX, /* u16 */ + DEVLINK_ATTR_SB_OCC_CUR, /* u32 */ + DEVLINK_ATTR_SB_OCC_MAX, /* u32 */ + DEVLINK_ATTR_ESWITCH_MODE, /* u16 */ + DEVLINK_ATTR_ESWITCH_INLINE_MODE, /* u8 */ + + DEVLINK_ATTR_DPIPE_TABLES, /* nested */ + DEVLINK_ATTR_DPIPE_TABLE, /* nested */ + DEVLINK_ATTR_DPIPE_TABLE_NAME, /* string */ + DEVLINK_ATTR_DPIPE_TABLE_SIZE, /* u64 */ + DEVLINK_ATTR_DPIPE_TABLE_MATCHES, /* nested */ + DEVLINK_ATTR_DPIPE_TABLE_ACTIONS, /* nested */ + DEVLINK_ATTR_DPIPE_TABLE_COUNTERS_ENABLED, /* u8 */ + + DEVLINK_ATTR_DPIPE_ENTRIES, /* nested */ + DEVLINK_ATTR_DPIPE_ENTRY, /* nested */ + DEVLINK_ATTR_DPIPE_ENTRY_INDEX, /* u64 */ + DEVLINK_ATTR_DPIPE_ENTRY_MATCH_VALUES, /* nested */ + DEVLINK_ATTR_DPIPE_ENTRY_ACTION_VALUES, /* nested */ + DEVLINK_ATTR_DPIPE_ENTRY_COUNTER, /* u64 */ + + DEVLINK_ATTR_DPIPE_MATCH, /* nested */ + DEVLINK_ATTR_DPIPE_MATCH_VALUE, /* nested */ + DEVLINK_ATTR_DPIPE_MATCH_TYPE, /* u32 */ + + DEVLINK_ATTR_DPIPE_ACTION, /* nested */ + DEVLINK_ATTR_DPIPE_ACTION_VALUE, /* nested */ + DEVLINK_ATTR_DPIPE_ACTION_TYPE, /* u32 */ + + DEVLINK_ATTR_DPIPE_VALUE, + DEVLINK_ATTR_DPIPE_VALUE_MASK, + DEVLINK_ATTR_DPIPE_VALUE_MAPPING, /* u32 */ + + DEVLINK_ATTR_DPIPE_HEADERS, /* nested */ + DEVLINK_ATTR_DPIPE_HEADER, /* nested */ + DEVLINK_ATTR_DPIPE_HEADER_NAME, /* string */ + DEVLINK_ATTR_DPIPE_HEADER_ID, /* u32 */ + DEVLINK_ATTR_DPIPE_HEADER_FIELDS, /* nested */ + DEVLINK_ATTR_DPIPE_HEADER_GLOBAL, /* u8 */ + DEVLINK_ATTR_DPIPE_HEADER_INDEX, /* u32 */ + + DEVLINK_ATTR_DPIPE_FIELD, /* nested */ + DEVLINK_ATTR_DPIPE_FIELD_NAME, /* string */ + DEVLINK_ATTR_DPIPE_FIELD_ID, /* u32 */ + DEVLINK_ATTR_DPIPE_FIELD_BITWIDTH, /* u32 */ + DEVLINK_ATTR_DPIPE_FIELD_MAPPING_TYPE, /* u32 */ + + DEVLINK_ATTR_PAD, + + DEVLINK_ATTR_ESWITCH_ENCAP_MODE, /* u8 */ + DEVLINK_ATTR_RESOURCE_LIST, /* nested */ + DEVLINK_ATTR_RESOURCE, /* nested */ + DEVLINK_ATTR_RESOURCE_NAME, /* string */ + DEVLINK_ATTR_RESOURCE_ID, /* u64 */ + DEVLINK_ATTR_RESOURCE_SIZE, /* u64 */ + DEVLINK_ATTR_RESOURCE_SIZE_NEW, /* u64 */ + DEVLINK_ATTR_RESOURCE_SIZE_VALID, /* u8 */ + DEVLINK_ATTR_RESOURCE_SIZE_MIN, /* u64 */ + DEVLINK_ATTR_RESOURCE_SIZE_MAX, /* u64 */ + DEVLINK_ATTR_RESOURCE_SIZE_GRAN, /* u64 */ + DEVLINK_ATTR_RESOURCE_UNIT, /* u8 */ + DEVLINK_ATTR_RESOURCE_OCC, /* u64 */ + DEVLINK_ATTR_DPIPE_TABLE_RESOURCE_ID, /* u64 */ + DEVLINK_ATTR_DPIPE_TABLE_RESOURCE_UNITS,/* u64 */ + + DEVLINK_ATTR_PORT_FLAVOUR, /* u16 */ + DEVLINK_ATTR_PORT_NUMBER, /* u32 */ + DEVLINK_ATTR_PORT_SPLIT_SUBPORT_NUMBER, /* u32 */ + + DEVLINK_ATTR_PARAM, /* nested */ + DEVLINK_ATTR_PARAM_NAME, /* string */ + DEVLINK_ATTR_PARAM_GENERIC, /* flag */ + DEVLINK_ATTR_PARAM_TYPE, /* u8 */ + DEVLINK_ATTR_PARAM_VALUES_LIST, /* nested */ + DEVLINK_ATTR_PARAM_VALUE, /* nested */ + DEVLINK_ATTR_PARAM_VALUE_DATA, /* dynamic */ + DEVLINK_ATTR_PARAM_VALUE_CMODE, /* u8 */ + + DEVLINK_ATTR_REGION_NAME, /* string */ + DEVLINK_ATTR_REGION_SIZE, /* u64 */ + DEVLINK_ATTR_REGION_SNAPSHOTS, /* nested */ + DEVLINK_ATTR_REGION_SNAPSHOT, /* nested */ + DEVLINK_ATTR_REGION_SNAPSHOT_ID, /* u32 */ + + DEVLINK_ATTR_REGION_CHUNKS, /* nested */ + DEVLINK_ATTR_REGION_CHUNK, /* nested */ + DEVLINK_ATTR_REGION_CHUNK_DATA, /* binary */ + DEVLINK_ATTR_REGION_CHUNK_ADDR, /* u64 */ + DEVLINK_ATTR_REGION_CHUNK_LEN, /* u64 */ + + DEVLINK_ATTR_INFO_DRIVER_NAME, /* string */ + DEVLINK_ATTR_INFO_SERIAL_NUMBER, /* string */ + DEVLINK_ATTR_INFO_VERSION_FIXED, /* nested */ + DEVLINK_ATTR_INFO_VERSION_RUNNING, /* nested */ + DEVLINK_ATTR_INFO_VERSION_STORED, /* nested */ + DEVLINK_ATTR_INFO_VERSION_NAME, /* string */ + DEVLINK_ATTR_INFO_VERSION_VALUE, /* string */ + + DEVLINK_ATTR_SB_POOL_CELL_SIZE, /* u32 */ + + DEVLINK_ATTR_FMSG, /* nested */ + DEVLINK_ATTR_FMSG_OBJ_NEST_START, /* flag */ + DEVLINK_ATTR_FMSG_PAIR_NEST_START, /* flag */ + DEVLINK_ATTR_FMSG_ARR_NEST_START, /* flag */ + DEVLINK_ATTR_FMSG_NEST_END, /* flag */ + DEVLINK_ATTR_FMSG_OBJ_NAME, /* string */ + DEVLINK_ATTR_FMSG_OBJ_VALUE_TYPE, /* u8 */ + DEVLINK_ATTR_FMSG_OBJ_VALUE_DATA, /* dynamic */ + + DEVLINK_ATTR_HEALTH_REPORTER, /* nested */ + DEVLINK_ATTR_HEALTH_REPORTER_NAME, /* string */ + DEVLINK_ATTR_HEALTH_REPORTER_STATE, /* u8 */ + DEVLINK_ATTR_HEALTH_REPORTER_ERR_COUNT, /* u64 */ + DEVLINK_ATTR_HEALTH_REPORTER_RECOVER_COUNT, /* u64 */ + DEVLINK_ATTR_HEALTH_REPORTER_DUMP_TS, /* u64 */ + DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD, /* u64 */ + DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER, /* u8 */ + + DEVLINK_ATTR_FLASH_UPDATE_FILE_NAME, /* string */ + DEVLINK_ATTR_FLASH_UPDATE_COMPONENT, /* string */ + DEVLINK_ATTR_FLASH_UPDATE_STATUS_MSG, /* string */ + DEVLINK_ATTR_FLASH_UPDATE_STATUS_DONE, /* u64 */ + DEVLINK_ATTR_FLASH_UPDATE_STATUS_TOTAL, /* u64 */ + + DEVLINK_ATTR_PORT_PCI_PF_NUMBER, /* u16 */ + DEVLINK_ATTR_PORT_PCI_VF_NUMBER, /* u16 */ + + DEVLINK_ATTR_STATS, /* nested */ + + DEVLINK_ATTR_TRAP_NAME, /* string */ + /* enum devlink_trap_action */ + DEVLINK_ATTR_TRAP_ACTION, /* u8 */ + /* enum devlink_trap_type */ + DEVLINK_ATTR_TRAP_TYPE, /* u8 */ + DEVLINK_ATTR_TRAP_GENERIC, /* flag */ + DEVLINK_ATTR_TRAP_METADATA, /* nested */ + DEVLINK_ATTR_TRAP_GROUP_NAME, /* string */ + + DEVLINK_ATTR_RELOAD_FAILED, /* u8 0 or 1 */ + + DEVLINK_ATTR_HEALTH_REPORTER_DUMP_TS_NS, /* u64 */ + + DEVLINK_ATTR_NETNS_FD, /* u32 */ + DEVLINK_ATTR_NETNS_PID, /* u32 */ + DEVLINK_ATTR_NETNS_ID, /* u32 */ + + DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP, /* u8 */ + + DEVLINK_ATTR_TRAP_POLICER_ID, /* u32 */ + DEVLINK_ATTR_TRAP_POLICER_RATE, /* u64 */ + DEVLINK_ATTR_TRAP_POLICER_BURST, /* u64 */ + + DEVLINK_ATTR_PORT_FUNCTION, /* nested */ + + DEVLINK_ATTR_INFO_BOARD_SERIAL_NUMBER, /* string */ + + DEVLINK_ATTR_PORT_LANES, /* u32 */ + DEVLINK_ATTR_PORT_SPLITTABLE, /* u8 */ + + DEVLINK_ATTR_PORT_EXTERNAL, /* u8 */ + DEVLINK_ATTR_PORT_CONTROLLER_NUMBER, /* u32 */ + + DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT, /* u64 */ + DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK, /* bitfield32 */ + + DEVLINK_ATTR_RELOAD_ACTION, /* u8 */ + DEVLINK_ATTR_RELOAD_ACTIONS_PERFORMED, /* bitfield32 */ + DEVLINK_ATTR_RELOAD_LIMITS, /* bitfield32 */ + + DEVLINK_ATTR_DEV_STATS, /* nested */ + DEVLINK_ATTR_RELOAD_STATS, /* nested */ + DEVLINK_ATTR_RELOAD_STATS_ENTRY, /* nested */ + DEVLINK_ATTR_RELOAD_STATS_LIMIT, /* u8 */ + DEVLINK_ATTR_RELOAD_STATS_VALUE, /* u32 */ + DEVLINK_ATTR_REMOTE_RELOAD_STATS, /* nested */ + DEVLINK_ATTR_RELOAD_ACTION_INFO, /* nested */ + DEVLINK_ATTR_RELOAD_ACTION_STATS, /* nested */ + + DEVLINK_ATTR_PORT_PCI_SF_NUMBER, /* u32 */ + + DEVLINK_ATTR_RATE_TYPE, /* u16 */ + DEVLINK_ATTR_RATE_TX_SHARE, /* u64 */ + DEVLINK_ATTR_RATE_TX_MAX, /* u64 */ + DEVLINK_ATTR_RATE_NODE_NAME, /* string */ + DEVLINK_ATTR_RATE_PARENT_NODE_NAME, /* string */ + + DEVLINK_ATTR_REGION_MAX_SNAPSHOTS, /* u32 */ + + DEVLINK_ATTR_LINECARD_INDEX, /* u32 */ + DEVLINK_ATTR_LINECARD_STATE, /* u8 */ + DEVLINK_ATTR_LINECARD_TYPE, /* string */ + DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ + + DEVLINK_ATTR_NESTED_DEVLINK, /* nested */ + + DEVLINK_ATTR_SELFTESTS, /* nested */ + + DEVLINK_ATTR_RATE_TX_PRIORITY, /* u32 */ + DEVLINK_ATTR_RATE_TX_WEIGHT, /* u32 */ + + DEVLINK_ATTR_REGION_DIRECT, /* flag */ + + /* add new attributes above here, update the policy in devlink.c */ + + __DEVLINK_ATTR_MAX, + DEVLINK_ATTR_MAX = __DEVLINK_ATTR_MAX - 1 +}; + +/* Mapping between internal resource described by the field and system + * structure + */ +enum devlink_dpipe_field_mapping_type { + DEVLINK_DPIPE_FIELD_MAPPING_TYPE_NONE, + DEVLINK_DPIPE_FIELD_MAPPING_TYPE_IFINDEX, +}; + +/* Match type - specify the type of the match */ +enum devlink_dpipe_match_type { + DEVLINK_DPIPE_MATCH_TYPE_FIELD_EXACT, +}; + +/* Action type - specify the action type */ +enum devlink_dpipe_action_type { + DEVLINK_DPIPE_ACTION_TYPE_FIELD_MODIFY, +}; + +enum devlink_dpipe_field_ethernet_id { + DEVLINK_DPIPE_FIELD_ETHERNET_DST_MAC, +}; + +enum devlink_dpipe_field_ipv4_id { + DEVLINK_DPIPE_FIELD_IPV4_DST_IP, +}; + +enum devlink_dpipe_field_ipv6_id { + DEVLINK_DPIPE_FIELD_IPV6_DST_IP, +}; + +enum devlink_dpipe_header_id { + DEVLINK_DPIPE_HEADER_ETHERNET, + DEVLINK_DPIPE_HEADER_IPV4, + DEVLINK_DPIPE_HEADER_IPV6, +}; + +enum devlink_resource_unit { + DEVLINK_RESOURCE_UNIT_ENTRY, +}; + +enum devlink_port_fn_attr_cap { + DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT, + DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT, + + /* Add new caps above */ + __DEVLINK_PORT_FN_ATTR_CAPS_MAX, +}; + +#define DEVLINK_PORT_FN_CAP_ROCE _BITUL(DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT) +#define DEVLINK_PORT_FN_CAP_MIGRATABLE \ + _BITUL(DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_PACKET _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT) + +enum devlink_port_function_attr { + DEVLINK_PORT_FUNCTION_ATTR_UNSPEC, + DEVLINK_PORT_FUNCTION_ATTR_HW_ADDR, /* binary */ + DEVLINK_PORT_FN_ATTR_STATE, /* u8 */ + DEVLINK_PORT_FN_ATTR_OPSTATE, /* u8 */ + DEVLINK_PORT_FN_ATTR_CAPS, /* bitfield32 */ + DEVLINK_PORT_FN_ATTR_DEVLINK, /* nested */ + + __DEVLINK_PORT_FUNCTION_ATTR_MAX, + DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1 +}; + +enum devlink_port_fn_state { + DEVLINK_PORT_FN_STATE_INACTIVE, + DEVLINK_PORT_FN_STATE_ACTIVE, +}; + +/** + * enum devlink_port_fn_opstate - indicates operational state of the function + * @DEVLINK_PORT_FN_OPSTATE_ATTACHED: Driver is attached to the function. + * For graceful tear down of the function, after inactivation of the + * function, user should wait for operational state to turn DETACHED. + * @DEVLINK_PORT_FN_OPSTATE_DETACHED: Driver is detached from the function. + * It is safe to delete the port. + */ +enum devlink_port_fn_opstate { + DEVLINK_PORT_FN_OPSTATE_DETACHED, + DEVLINK_PORT_FN_OPSTATE_ATTACHED, +}; + +#endif /* _LINUX_DEVLINK_H_ */ diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h new file mode 100644 index 0000000..ef38c2b --- /dev/null +++ b/include/uapi/linux/elf-em.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_ELF_EM_H +#define _LINUX_ELF_EM_H + +/* These constants define the various ELF target machines */ +#define EM_NONE 0 +#define EM_M32 1 +#define EM_SPARC 2 +#define EM_386 3 +#define EM_68K 4 +#define EM_88K 5 +#define EM_486 6 /* Perhaps disused */ +#define EM_860 7 +#define EM_MIPS 8 /* MIPS R3000 (officially, big-endian only) */ + /* Next two are historical and binaries and + modules of these types will be rejected by + Linux. */ +#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ +#define EM_MIPS_RS4_BE 10 /* MIPS R4000 big-endian */ + +#define EM_PARISC 15 /* HPPA */ +#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ +#define EM_PPC 20 /* PowerPC */ +#define EM_PPC64 21 /* PowerPC64 */ +#define EM_SPU 23 /* Cell BE SPU */ +#define EM_ARM 40 /* ARM 32 bit */ +#define EM_SH 42 /* SuperH */ +#define EM_SPARCV9 43 /* SPARC v9 64-bit */ +#define EM_H8_300 46 /* Renesas H8/300 */ +#define EM_IA_64 50 /* HP/Intel IA-64 */ +#define EM_X86_64 62 /* AMD x86-64 */ +#define EM_S390 22 /* IBM S/390 */ +#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ +#define EM_M32R 88 /* Renesas M32R */ +#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ +#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ +#define EM_ARCOMPACT 93 /* ARCompact processor */ +#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ +#define EM_BLACKFIN 106 /* ADI Blackfin Processor */ +#define EM_UNICORE 110 /* UniCore-32 */ +#define EM_ALTERA_NIOS2 113 /* Altera Nios II soft-core processor */ +#define EM_TI_C6000 140 /* TI C6X DSPs */ +#define EM_HEXAGON 164 /* QUALCOMM Hexagon */ +#define EM_NDS32 167 /* Andes Technology compact code size + embedded RISC processor family */ +#define EM_AARCH64 183 /* ARM 64 bit */ +#define EM_TILEPRO 188 /* Tilera TILEPro */ +#define EM_MICROBLAZE 189 /* Xilinx MicroBlaze */ +#define EM_TILEGX 191 /* Tilera TILE-Gx */ +#define EM_ARCV2 195 /* ARCv2 Cores */ +#define EM_RISCV 243 /* RISC-V */ +#define EM_BPF 247 /* Linux BPF - in-kernel virtual machine */ +#define EM_CSKY 252 /* C-SKY */ +#define EM_LOONGARCH 258 /* LoongArch */ +#define EM_FRV 0x5441 /* Fujitsu FR-V */ + +/* + * This is an interim value that we will use until the committee comes + * up with a final number. + */ +#define EM_ALPHA 0x9026 + +/* Bogus old m32r magic number, used by old tools. */ +#define EM_CYGNUS_M32R 0x9041 +/* This is the old interim value for S/390 architecture */ +#define EM_S390_OLD 0xA390 +/* Also Panasonic/MEI MN10300, AM33 */ +#define EM_CYGNUS_MN10300 0xbeef + + +#endif /* _LINUX_ELF_EM_H */ diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h new file mode 100644 index 0000000..232df14 --- /dev/null +++ b/include/uapi/linux/fib_rules.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_FIB_RULES_H +#define __LINUX_FIB_RULES_H + +#include <linux/types.h> +#include <linux/rtnetlink.h> + +/* rule is permanent, and cannot be deleted */ +#define FIB_RULE_PERMANENT 0x00000001 +#define FIB_RULE_INVERT 0x00000002 +#define FIB_RULE_UNRESOLVED 0x00000004 +#define FIB_RULE_IIF_DETACHED 0x00000008 +#define FIB_RULE_DEV_DETACHED FIB_RULE_IIF_DETACHED +#define FIB_RULE_OIF_DETACHED 0x00000010 + +/* try to find source address in routing lookups */ +#define FIB_RULE_FIND_SADDR 0x00010000 + +struct fib_rule_hdr { + __u8 family; + __u8 dst_len; + __u8 src_len; + __u8 tos; + + __u8 table; + __u8 res1; /* reserved */ + __u8 res2; /* reserved */ + __u8 action; + + __u32 flags; +}; + +struct fib_rule_uid_range { + __u32 start; + __u32 end; +}; + +struct fib_rule_port_range { + __u16 start; + __u16 end; +}; + +enum { + FRA_UNSPEC, + FRA_DST, /* destination address */ + FRA_SRC, /* source address */ + FRA_IIFNAME, /* interface name */ +#define FRA_IFNAME FRA_IIFNAME + FRA_GOTO, /* target to jump to (FR_ACT_GOTO) */ + FRA_UNUSED2, + FRA_PRIORITY, /* priority/preference */ + FRA_UNUSED3, + FRA_UNUSED4, + FRA_UNUSED5, + FRA_FWMARK, /* mark */ + FRA_FLOW, /* flow/class id */ + FRA_TUN_ID, + FRA_SUPPRESS_IFGROUP, + FRA_SUPPRESS_PREFIXLEN, + FRA_TABLE, /* Extended table id */ + FRA_FWMASK, /* mask for netfilter mark */ + FRA_OIFNAME, + FRA_PAD, + FRA_L3MDEV, /* iif or oif is l3mdev goto its table */ + FRA_UID_RANGE, /* UID range */ + FRA_PROTOCOL, /* Originator of the rule */ + FRA_IP_PROTO, /* ip proto */ + FRA_SPORT_RANGE, /* sport */ + FRA_DPORT_RANGE, /* dport */ + __FRA_MAX +}; + +#define FRA_MAX (__FRA_MAX - 1) + +enum { + FR_ACT_UNSPEC, + FR_ACT_TO_TBL, /* Pass to fixed table */ + FR_ACT_GOTO, /* Jump to another rule */ + FR_ACT_NOP, /* No operation */ + FR_ACT_RES3, + FR_ACT_RES4, + FR_ACT_BLACKHOLE, /* Drop without notification */ + FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */ + FR_ACT_PROHIBIT, /* Drop with EACCES */ + __FR_ACT_MAX, +}; + +#define FR_ACT_MAX (__FR_ACT_MAX - 1) + +#endif diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h new file mode 100644 index 0000000..eaef459 --- /dev/null +++ b/include/uapi/linux/filter.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Linux Socket Filter Data Structures + */ + +#ifndef __LINUX_FILTER_H__ +#define __LINUX_FILTER_H__ + + +#include <linux/types.h> +#include <linux/bpf_common.h> + +/* + * Current version of the filter code architecture. + */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * Try and keep these values and structures similar to BSD, especially + * the BPF code definitions which need to match so you can share filters + */ + +struct sock_filter { /* Filter block */ + __u16 code; /* Actual filter code */ + __u8 jt; /* Jump true */ + __u8 jf; /* Jump false */ + __u32 k; /* Generic multiuse field */ +}; + +struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ + unsigned short len; /* Number of filter blocks */ + struct sock_filter *filter; +}; + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * Macros for filter block array initializers. + */ +#ifndef BPF_STMT +#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } +#endif +#ifndef BPF_JUMP +#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } +#endif + +/* + * Number of scratch memory words for: BPF_ST and BPF_STX + */ +#define BPF_MEMWORDS 16 + +/* RATIONALE. Negative offsets are invalid in BPF. + We use them to reference ancillary data. + Unlike introduction new instructions, it does not break + existing compilers/optimizers. + */ +#define SKF_AD_OFF (-0x1000) +#define SKF_AD_PROTOCOL 0 +#define SKF_AD_PKTTYPE 4 +#define SKF_AD_IFINDEX 8 +#define SKF_AD_NLATTR 12 +#define SKF_AD_NLATTR_NEST 16 +#define SKF_AD_MARK 20 +#define SKF_AD_QUEUE 24 +#define SKF_AD_HATYPE 28 +#define SKF_AD_RXHASH 32 +#define SKF_AD_CPU 36 +#define SKF_AD_ALU_XOR_X 40 +#define SKF_AD_VLAN_TAG 44 +#define SKF_AD_VLAN_TAG_PRESENT 48 +#define SKF_AD_PAY_OFFSET 52 +#define SKF_AD_RANDOM 56 +#define SKF_AD_VLAN_TPID 60 +#define SKF_AD_MAX 64 + +#define SKF_NET_OFF (-0x100000) +#define SKF_LL_OFF (-0x200000) + +#define BPF_NET_OFF SKF_NET_OFF +#define BPF_LL_OFF SKF_LL_OFF + +#endif /* __LINUX_FILTER_H__ */ diff --git a/include/uapi/linux/fou.h b/include/uapi/linux/fou.h new file mode 100644 index 0000000..1c2b680 --- /dev/null +++ b/include/uapi/linux/fou.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/fou.yaml */ +/* YNL-GEN uapi header */ + +#ifndef _LINUX_FOU_H +#define _LINUX_FOU_H + +#define FOU_GENL_NAME "fou" +#define FOU_GENL_VERSION 1 + +enum { + FOU_ENCAP_UNSPEC, + FOU_ENCAP_DIRECT, + FOU_ENCAP_GUE, +}; + +enum { + FOU_ATTR_UNSPEC, + FOU_ATTR_PORT, + FOU_ATTR_AF, + FOU_ATTR_IPPROTO, + FOU_ATTR_TYPE, + FOU_ATTR_REMCSUM_NOPARTIAL, + FOU_ATTR_LOCAL_V4, + FOU_ATTR_LOCAL_V6, + FOU_ATTR_PEER_V4, + FOU_ATTR_PEER_V6, + FOU_ATTR_PEER_PORT, + FOU_ATTR_IFINDEX, + + __FOU_ATTR_MAX +}; +#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) + +enum { + FOU_CMD_UNSPEC, + FOU_CMD_ADD, + FOU_CMD_DEL, + FOU_CMD_GET, + + __FOU_CMD_MAX +}; +#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) + +#endif /* _LINUX_FOU_H */ diff --git a/include/uapi/linux/gen_stats.h b/include/uapi/linux/gen_stats.h new file mode 100644 index 0000000..852f234 --- /dev/null +++ b/include/uapi/linux/gen_stats.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_GEN_STATS_H +#define __LINUX_GEN_STATS_H + +#include <linux/types.h> + +enum { + TCA_STATS_UNSPEC, + TCA_STATS_BASIC, + TCA_STATS_RATE_EST, + TCA_STATS_QUEUE, + TCA_STATS_APP, + TCA_STATS_RATE_EST64, + TCA_STATS_PAD, + TCA_STATS_BASIC_HW, + TCA_STATS_PKT64, + __TCA_STATS_MAX, +}; +#define TCA_STATS_MAX (__TCA_STATS_MAX - 1) + +/** + * struct gnet_stats_basic - byte/packet throughput statistics + * @bytes: number of seen bytes + * @packets: number of seen packets + */ +struct gnet_stats_basic { + __u64 bytes; + __u32 packets; +}; + +/** + * struct gnet_stats_rate_est - rate estimator + * @bps: current byte rate + * @pps: current packet rate + */ +struct gnet_stats_rate_est { + __u32 bps; + __u32 pps; +}; + +/** + * struct gnet_stats_rate_est64 - rate estimator + * @bps: current byte rate + * @pps: current packet rate + */ +struct gnet_stats_rate_est64 { + __u64 bps; + __u64 pps; +}; + +/** + * struct gnet_stats_queue - queuing statistics + * @qlen: queue length + * @backlog: backlog size of queue + * @drops: number of dropped packets + * @requeues: number of requeues + * @overlimits: number of enqueues over the limit + */ +struct gnet_stats_queue { + __u32 qlen; + __u32 backlog; + __u32 drops; + __u32 requeues; + __u32 overlimits; +}; + +/** + * struct gnet_estimator - rate estimator configuration + * @interval: sampling period + * @ewma_log: the log of measurement window weight + */ +struct gnet_estimator { + signed char interval; + unsigned char ewma_log; +}; + + +#endif /* __LINUX_GEN_STATS_H */ diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h new file mode 100644 index 0000000..e9b8117 --- /dev/null +++ b/include/uapi/linux/genetlink.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_GENERIC_NETLINK_H +#define __LINUX_GENERIC_NETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +#define GENL_NAMSIZ 16 /* length of family name */ + +#define GENL_MIN_ID NLMSG_MIN_TYPE +#define GENL_MAX_ID 1023 + +struct genlmsghdr { + __u8 cmd; + __u8 version; + __u16 reserved; +}; + +#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) + +#define GENL_ADMIN_PERM 0x01 +#define GENL_CMD_CAP_DO 0x02 +#define GENL_CMD_CAP_DUMP 0x04 +#define GENL_CMD_CAP_HASPOL 0x08 +#define GENL_UNS_ADMIN_PERM 0x10 + +/* + * List of reserved static generic netlink identifiers: + */ +#define GENL_ID_CTRL NLMSG_MIN_TYPE +#define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) +/* must be last reserved + 1 */ +#define GENL_START_ALLOC (NLMSG_MIN_TYPE + 3) + +/************************************************************************** + * Controller + **************************************************************************/ + +enum { + CTRL_CMD_UNSPEC, + CTRL_CMD_NEWFAMILY, + CTRL_CMD_DELFAMILY, + CTRL_CMD_GETFAMILY, + CTRL_CMD_NEWOPS, + CTRL_CMD_DELOPS, + CTRL_CMD_GETOPS, + CTRL_CMD_NEWMCAST_GRP, + CTRL_CMD_DELMCAST_GRP, + CTRL_CMD_GETMCAST_GRP, /* unused */ + CTRL_CMD_GETPOLICY, + __CTRL_CMD_MAX, +}; + +#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) + +enum { + CTRL_ATTR_UNSPEC, + CTRL_ATTR_FAMILY_ID, + CTRL_ATTR_FAMILY_NAME, + CTRL_ATTR_VERSION, + CTRL_ATTR_HDRSIZE, + CTRL_ATTR_MAXATTR, + CTRL_ATTR_OPS, + CTRL_ATTR_MCAST_GROUPS, + CTRL_ATTR_POLICY, + CTRL_ATTR_OP_POLICY, + CTRL_ATTR_OP, + __CTRL_ATTR_MAX, +}; + +#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) + +enum { + CTRL_ATTR_OP_UNSPEC, + CTRL_ATTR_OP_ID, + CTRL_ATTR_OP_FLAGS, + __CTRL_ATTR_OP_MAX, +}; + +#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) + +enum { + CTRL_ATTR_MCAST_GRP_UNSPEC, + CTRL_ATTR_MCAST_GRP_NAME, + CTRL_ATTR_MCAST_GRP_ID, + __CTRL_ATTR_MCAST_GRP_MAX, +}; + +#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) + +enum { + CTRL_ATTR_POLICY_UNSPEC, + CTRL_ATTR_POLICY_DO, + CTRL_ATTR_POLICY_DUMP, + + __CTRL_ATTR_POLICY_DUMP_MAX, + CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1 +}; + +#define CTRL_ATTR_POLICY_MAX (__CTRL_ATTR_POLICY_DUMP_MAX - 1) + +#endif /* __LINUX_GENERIC_NETLINK_H */ diff --git a/include/uapi/linux/hdlc/ioctl.h b/include/uapi/linux/hdlc/ioctl.h new file mode 100644 index 0000000..b06341a --- /dev/null +++ b/include/uapi/linux/hdlc/ioctl.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __HDLC_IOCTL_H__ +#define __HDLC_IOCTL_H__ + + +#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ + +#define CLOCK_DEFAULT 0 /* Default setting */ +#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ +#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ +#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ +#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ + + +#define ENCODING_DEFAULT 0 /* Default setting */ +#define ENCODING_NRZ 1 +#define ENCODING_NRZI 2 +#define ENCODING_FM_MARK 3 +#define ENCODING_FM_SPACE 4 +#define ENCODING_MANCHESTER 5 + + +#define PARITY_DEFAULT 0 /* Default setting */ +#define PARITY_NONE 1 /* No parity */ +#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ +#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ +#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ +#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ +#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ +#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ + +#define LMI_DEFAULT 0 /* Default setting */ +#define LMI_NONE 1 /* No LMI, all PVCs are static */ +#define LMI_ANSI 2 /* ANSI Annex D */ +#define LMI_CCITT 3 /* ITU-T Annex A */ +#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; +} sync_serial_settings; /* V.35, V.24, X.21 */ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; + unsigned int slot_map; +} te1_settings; /* T1, E1 */ + +typedef struct { + unsigned short encoding; + unsigned short parity; +} raw_hdlc_proto; + +typedef struct { + unsigned int t391; + unsigned int t392; + unsigned int n391; + unsigned int n392; + unsigned int n393; + unsigned short lmi; + unsigned short dce; /* 1 for DCE (network side) operation */ +} fr_proto; + +typedef struct { + unsigned int dlci; +} fr_proto_pvc; /* for creating/deleting FR PVCs */ + +typedef struct { + unsigned int dlci; + char master[IFNAMSIZ]; /* Name of master FRAD device */ +}fr_proto_pvc_info; /* for returning PVC information only */ + +typedef struct { + unsigned int interval; + unsigned int timeout; +} cisco_proto; + +typedef struct { + unsigned short dce; /* 1 for DCE (network side) operation */ + unsigned int modulo; /* modulo (8 = basic / 128 = extended) */ + unsigned int window; /* frame window size */ + unsigned int t1; /* timeout t1 */ + unsigned int t2; /* timeout t2 */ + unsigned int n2; /* frame retry counter */ +} x25_hdlc_proto; + +/* PPP doesn't need any info now - supply length = 0 to ioctl */ + +#endif /* __ASSEMBLY__ */ +#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h new file mode 100644 index 0000000..fa6388c --- /dev/null +++ b/include/uapi/linux/icmpv6.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_ICMPV6_H +#define _LINUX_ICMPV6_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +struct icmp6hdr { + + __u8 icmp6_type; + __u8 icmp6_code; + __sum16 icmp6_cksum; + + + union { + __be32 un_data32[1]; + __be16 un_data16[2]; + __u8 un_data8[4]; + + struct icmpv6_echo { + __be16 identifier; + __be16 sequence; + } u_echo; + + struct icmpv6_nd_advt { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u32 reserved:5, + override:1, + solicited:1, + router:1, + reserved2:24; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u32 router:1, + solicited:1, + override:1, + reserved:29; +#else +#error "Please fix <asm/byteorder.h>" +#endif + } u_nd_advt; + + struct icmpv6_nd_ra { + __u8 hop_limit; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 reserved:3, + router_pref:2, + home_agent:1, + other:1, + managed:1; + +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 managed:1, + other:1, + home_agent:1, + router_pref:2, + reserved:3; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __be16 rt_lifetime; + } u_nd_ra; + + } icmp6_dataun; + +#define icmp6_identifier icmp6_dataun.u_echo.identifier +#define icmp6_sequence icmp6_dataun.u_echo.sequence +#define icmp6_pointer icmp6_dataun.un_data32[0] +#define icmp6_mtu icmp6_dataun.un_data32[0] +#define icmp6_unused icmp6_dataun.un_data32[0] +#define icmp6_maxdelay icmp6_dataun.un_data16[0] +#define icmp6_datagram_len icmp6_dataun.un_data8[0] +#define icmp6_router icmp6_dataun.u_nd_advt.router +#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited +#define icmp6_override icmp6_dataun.u_nd_advt.override +#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved +#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit +#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed +#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other +#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime +#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +}; + + +#define ICMPV6_ROUTER_PREF_LOW 0x3 +#define ICMPV6_ROUTER_PREF_MEDIUM 0x0 +#define ICMPV6_ROUTER_PREF_HIGH 0x1 +#define ICMPV6_ROUTER_PREF_INVALID 0x2 + +#define ICMPV6_DEST_UNREACH 1 +#define ICMPV6_PKT_TOOBIG 2 +#define ICMPV6_TIME_EXCEED 3 +#define ICMPV6_PARAMPROB 4 + +#define ICMPV6_ERRMSG_MAX 127 + +#define ICMPV6_INFOMSG_MASK 0x80 + +#define ICMPV6_ECHO_REQUEST 128 +#define ICMPV6_ECHO_REPLY 129 +#define ICMPV6_MGM_QUERY 130 +#define ICMPV6_MGM_REPORT 131 +#define ICMPV6_MGM_REDUCTION 132 + +#define ICMPV6_NI_QUERY 139 +#define ICMPV6_NI_REPLY 140 + +#define ICMPV6_MLD2_REPORT 143 + +#define ICMPV6_DHAAD_REQUEST 144 +#define ICMPV6_DHAAD_REPLY 145 +#define ICMPV6_MOBILE_PREFIX_SOL 146 +#define ICMPV6_MOBILE_PREFIX_ADV 147 + +#define ICMPV6_MRDISC_ADV 151 + +#define ICMPV6_MSG_MAX 255 + +/* + * Codes for Destination Unreachable + */ +#define ICMPV6_NOROUTE 0 +#define ICMPV6_ADM_PROHIBITED 1 +#define ICMPV6_NOT_NEIGHBOUR 2 +#define ICMPV6_ADDR_UNREACH 3 +#define ICMPV6_PORT_UNREACH 4 +#define ICMPV6_POLICY_FAIL 5 +#define ICMPV6_REJECT_ROUTE 6 + +/* + * Codes for Time Exceeded + */ +#define ICMPV6_EXC_HOPLIMIT 0 +#define ICMPV6_EXC_FRAGTIME 1 + +/* + * Codes for Parameter Problem + */ +#define ICMPV6_HDR_FIELD 0 +#define ICMPV6_UNK_NEXTHDR 1 +#define ICMPV6_UNK_OPTION 2 +#define ICMPV6_HDR_INCOMP 3 + +/* Codes for EXT_ECHO (PROBE) */ +#define ICMPV6_EXT_ECHO_REQUEST 160 +#define ICMPV6_EXT_ECHO_REPLY 161 +/* + * constants for (set|get)sockopt + */ + +#define ICMPV6_FILTER 1 + +/* + * ICMPV6 filter + */ + +#define ICMPV6_FILTER_BLOCK 1 +#define ICMPV6_FILTER_PASS 2 +#define ICMPV6_FILTER_BLOCKOTHERS 3 +#define ICMPV6_FILTER_PASSONLY 4 + +struct icmp6_filter { + __u32 data[8]; +}; + +/* + * Definitions for MLDv2 + */ +#define MLD2_MODE_IS_INCLUDE 1 +#define MLD2_MODE_IS_EXCLUDE 2 +#define MLD2_CHANGE_TO_INCLUDE 3 +#define MLD2_CHANGE_TO_EXCLUDE 4 +#define MLD2_ALLOW_NEW_SOURCES 5 +#define MLD2_BLOCK_OLD_SOURCES 6 + +#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } } + + +#endif /* _LINUX_ICMPV6_H */ diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h new file mode 100644 index 0000000..b287b2a --- /dev/null +++ b/include/uapi/linux/if.h @@ -0,0 +1,296 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the INET interface module. + * + * Version: @(#)if.h 1.0.2 04/18/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IF_H +#define _LINUX_IF_H + +#include <linux/libc-compat.h> /* for compatibility with glibc */ +#include <linux/types.h> /* for "__kernel_caddr_t" et al */ +#include <linux/socket.h> /* for "struct sockaddr" et al */ + /* for "__user" et al */ + +#include <sys/socket.h> /* for struct sockaddr. */ + +#if __UAPI_DEF_IF_IFNAMSIZ +#define IFNAMSIZ 16 +#endif /* __UAPI_DEF_IF_IFNAMSIZ */ +#define IFALIASZ 256 +#define ALTIFNAMSIZ 128 +#include <linux/hdlc/ioctl.h> + +/* For glibc compatibility. An empty enum does not compile. */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \ + __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 +/** + * enum net_device_flags - &struct net_device flags + * + * These are the &struct net_device flags, they can be set by drivers, the + * kernel and some can be triggered by userspace. Userspace can query and + * set these flags using userspace utilities but there is also a sysfs + * entry available for all dev flags which can be queried and set. These flags + * are shared for all types of net_devices. The sysfs entries are available + * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs + * are annotated below, note that only a few flags can be toggled and some + * other flags are always preserved from the original net_device flags + * even if you try to set them via sysfs. Flags which are always preserved + * are kept under the flag grouping @IFF_VOLATILE. Flags which are __volatile__ + * are annotated below as such. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_UP: interface is up. Can be toggled through sysfs. + * @IFF_BROADCAST: broadcast address valid. Volatile. + * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs. + * @IFF_LOOPBACK: is a loopback net. Volatile. + * @IFF_POINTOPOINT: interface is has p-p link. Volatile. + * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs. + * Volatile. + * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile. + * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile. + * @IFF_PROMISC: receive all packets. Can be toggled through sysfs. + * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through + * sysfs. + * @IFF_MASTER: master of a load balancer. Volatile. + * @IFF_SLAVE: slave of a load balancer. Volatile. + * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs. + * @IFF_PORTSEL: can set media type. Can be toggled through sysfs. + * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs. + * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled + * through sysfs. + * @IFF_LOWER_UP: driver signals L1 up. Volatile. + * @IFF_DORMANT: driver signals dormant. Volatile. + * @IFF_ECHO: echo sent packets. Volatile. + */ +enum net_device_flags { +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS + IFF_UP = 1<<0, /* sysfs */ + IFF_BROADCAST = 1<<1, /* __volatile__ */ + IFF_DEBUG = 1<<2, /* sysfs */ + IFF_LOOPBACK = 1<<3, /* __volatile__ */ + IFF_POINTOPOINT = 1<<4, /* __volatile__ */ + IFF_NOTRAILERS = 1<<5, /* sysfs */ + IFF_RUNNING = 1<<6, /* __volatile__ */ + IFF_NOARP = 1<<7, /* sysfs */ + IFF_PROMISC = 1<<8, /* sysfs */ + IFF_ALLMULTI = 1<<9, /* sysfs */ + IFF_MASTER = 1<<10, /* __volatile__ */ + IFF_SLAVE = 1<<11, /* __volatile__ */ + IFF_MULTICAST = 1<<12, /* sysfs */ + IFF_PORTSEL = 1<<13, /* sysfs */ + IFF_AUTOMEDIA = 1<<14, /* sysfs */ + IFF_DYNAMIC = 1<<15, /* sysfs */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO + IFF_LOWER_UP = 1<<16, /* __volatile__ */ + IFF_DORMANT = 1<<17, /* __volatile__ */ + IFF_ECHO = 1<<18, /* __volatile__ */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ +}; +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS +#define IFF_UP IFF_UP +#define IFF_BROADCAST IFF_BROADCAST +#define IFF_DEBUG IFF_DEBUG +#define IFF_LOOPBACK IFF_LOOPBACK +#define IFF_POINTOPOINT IFF_POINTOPOINT +#define IFF_NOTRAILERS IFF_NOTRAILERS +#define IFF_RUNNING IFF_RUNNING +#define IFF_NOARP IFF_NOARP +#define IFF_PROMISC IFF_PROMISC +#define IFF_ALLMULTI IFF_ALLMULTI +#define IFF_MASTER IFF_MASTER +#define IFF_SLAVE IFF_SLAVE +#define IFF_MULTICAST IFF_MULTICAST +#define IFF_PORTSEL IFF_PORTSEL +#define IFF_AUTOMEDIA IFF_AUTOMEDIA +#define IFF_DYNAMIC IFF_DYNAMIC +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ + +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define IFF_LOWER_UP IFF_LOWER_UP +#define IFF_DORMANT IFF_DORMANT +#define IFF_ECHO IFF_ECHO +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ + +#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ + IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) + +#define IF_GET_IFACE 0x0001 /* for querying only */ +#define IF_GET_PROTO 0x0002 + +/* For definitions see hdlc.h */ +#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ +#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ +#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ +#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ +#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ +#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ +#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ + +/* For definitions see hdlc.h */ +#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ +#define IF_PROTO_PPP 0x2001 /* PPP protocol */ +#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ +#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ +#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ +#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ +#define IF_PROTO_X25 0x2006 /* X.25 */ +#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ +#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ +#define IF_PROTO_FR_ETH_PVC 0x200B +#define IF_PROTO_RAW 0x200C /* RAW Socket */ + +/* RFC 2863 operational status */ +enum { + IF_OPER_UNKNOWN, + IF_OPER_NOTPRESENT, + IF_OPER_DOWN, + IF_OPER_LOWERLAYERDOWN, + IF_OPER_TESTING, + IF_OPER_DORMANT, + IF_OPER_UP, +}; + +/* link modes */ +enum { + IF_LINK_MODE_DEFAULT, + IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ + IF_LINK_MODE_TESTING, /* limit upward transition to testing */ +}; + +/* + * Device mapping structure. I'd just gone off and designed a + * beautiful scheme using only loadable modules with arguments + * for driver options and along come the PCMCIA people 8) + * + * Ah well. The get() side of this is good for WDSETUP, and it'll + * be handy for debugging things. The set side is fine for now and + * being very small might be worth keeping for clean configuration. + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFMAP +struct ifmap { + unsigned long mem_start; + unsigned long mem_end; + unsigned short base_addr; + unsigned char irq; + unsigned char dma; + unsigned char port; + /* 3 bytes spare */ +}; +#endif /* __UAPI_DEF_IF_IFMAP */ + +struct if_settings { + unsigned int type; /* Type of physical device or protocol */ + unsigned int size; /* Size of the data allocated by the caller */ + union { + /* {atm/eth/dsl}_settings anyone ? */ + raw_hdlc_proto *raw_hdlc; + cisco_proto *cisco; + fr_proto *fr; + fr_proto_pvc *fr_pvc; + fr_proto_pvc_info *fr_pvc_info; + x25_hdlc_proto *x25; + + /* interface settings */ + sync_serial_settings *sync; + te1_settings *te1; + } ifs_ifsu; +}; + +/* + * Interface request structure used for socket + * ioctl's. All interface ioctl's must have parameter + * definitions which begin with ifr_name. The + * remainder may be interface specific. + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFREQ +struct ifreq { +#define IFHWADDRLEN 6 + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ + } ifr_ifrn; + + union { + struct sockaddr ifru_addr; + struct sockaddr ifru_dstaddr; + struct sockaddr ifru_broadaddr; + struct sockaddr ifru_netmask; + struct sockaddr ifru_hwaddr; + short ifru_flags; + int ifru_ivalue; + int ifru_mtu; + struct ifmap ifru_map; + char ifru_slave[IFNAMSIZ]; /* Just fits the size */ + char ifru_newname[IFNAMSIZ]; + void * ifru_data; + struct if_settings ifru_settings; + } ifr_ifru; +}; +#endif /* __UAPI_DEF_IF_IFREQ */ + +#define ifr_name ifr_ifrn.ifrn_name /* interface name */ +#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ +#define ifr_addr ifr_ifru.ifru_addr /* address */ +#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ +#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ +#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ +#define ifr_flags ifr_ifru.ifru_flags /* flags */ +#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ +#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ +#define ifr_map ifr_ifru.ifru_map /* device map */ +#define ifr_slave ifr_ifru.ifru_slave /* slave device */ +#define ifr_data ifr_ifru.ifru_data /* for use by interface */ +#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ +#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ +#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ +#define ifr_newname ifr_ifru.ifru_newname /* New name */ +#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ + +/* + * Structure used in SIOCGIFCONF request. + * Used to retrieve interface configuration + * for machine (useful for programs which + * must know all networks accessible). + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFCONF +struct ifconf { + int ifc_len; /* size of buffer */ + union { + char *ifcu_buf; + struct ifreq *ifcu_req; + } ifc_ifcu; +}; +#endif /* __UAPI_DEF_IF_IFCONF */ + +#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ +#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ + +#endif /* _LINUX_IF_H */ diff --git a/include/uapi/linux/if_addr.h b/include/uapi/linux/if_addr.h new file mode 100644 index 0000000..d6db3ff --- /dev/null +++ b/include/uapi/linux/if_addr.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_IF_ADDR_H +#define __LINUX_IF_ADDR_H + +#include <linux/types.h> +#include <linux/netlink.h> + +struct ifaddrmsg { + __u8 ifa_family; + __u8 ifa_prefixlen; /* The prefix length */ + __u8 ifa_flags; /* Flags */ + __u8 ifa_scope; /* Address scope */ + __u32 ifa_index; /* Link index */ +}; + +/* + * Important comment: + * IFA_ADDRESS is prefix address, rather than local interface address. + * It makes no difference for normally configured broadcast interfaces, + * but for point-to-point IFA_ADDRESS is DESTINATION address, + * local address is supplied in IFA_LOCAL attribute. + * + * IFA_FLAGS is a u32 attribute that extends the u8 field ifa_flags. + * If present, the value from struct ifaddrmsg will be ignored. + */ +enum { + IFA_UNSPEC, + IFA_ADDRESS, + IFA_LOCAL, + IFA_LABEL, + IFA_BROADCAST, + IFA_ANYCAST, + IFA_CACHEINFO, + IFA_MULTICAST, + IFA_FLAGS, + IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ + IFA_TARGET_NETNSID, + IFA_PROTO, /* u8, address protocol */ + __IFA_MAX, +}; + +#define IFA_MAX (__IFA_MAX - 1) + +/* ifa_flags */ +#define IFA_F_SECONDARY 0x01 +#define IFA_F_TEMPORARY IFA_F_SECONDARY + +#define IFA_F_NODAD 0x02 +#define IFA_F_OPTIMISTIC 0x04 +#define IFA_F_DADFAILED 0x08 +#define IFA_F_HOMEADDRESS 0x10 +#define IFA_F_DEPRECATED 0x20 +#define IFA_F_TENTATIVE 0x40 +#define IFA_F_PERMANENT 0x80 +#define IFA_F_MANAGETEMPADDR 0x100 +#define IFA_F_NOPREFIXROUTE 0x200 +#define IFA_F_MCAUTOJOIN 0x400 +#define IFA_F_STABLE_PRIVACY 0x800 + +struct ifa_cacheinfo { + __u32 ifa_prefered; + __u32 ifa_valid; + __u32 cstamp; /* created timestamp, hundredths of seconds */ + __u32 tstamp; /* updated timestamp, hundredths of seconds */ +}; + +/* backwards compatibility for userspace */ +#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) +#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) + +/* ifa_proto */ +#define IFAPROT_UNSPEC 0 +#define IFAPROT_KERNEL_LO 1 /* loopback */ +#define IFAPROT_KERNEL_RA 2 /* set by kernel from router announcement */ +#define IFAPROT_KERNEL_LL 3 /* link-local set by kernel */ + +#endif diff --git a/include/uapi/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h new file mode 100644 index 0000000..d1f5974 --- /dev/null +++ b/include/uapi/linux/if_addrlabel.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * if_addrlabel.h - netlink interface for address labels + * + * Copyright (C)2007 USAGI/WIDE Project, All Rights Reserved. + * + * Authors: + * YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org> + */ + +#ifndef __LINUX_IF_ADDRLABEL_H +#define __LINUX_IF_ADDRLABEL_H + +#include <linux/types.h> + +struct ifaddrlblmsg { + __u8 ifal_family; /* Address family */ + __u8 __ifal_reserved; /* Reserved */ + __u8 ifal_prefixlen; /* Prefix length */ + __u8 ifal_flags; /* Flags */ + __u32 ifal_index; /* Link index */ + __u32 ifal_seq; /* sequence number */ +}; + +enum { + IFAL_ADDRESS = 1, + IFAL_LABEL = 2, + __IFAL_MAX +}; + +#define IFAL_MAX (__IFAL_MAX - 1) + +#endif diff --git a/include/uapi/linux/if_alg.h b/include/uapi/linux/if_alg.h new file mode 100644 index 0000000..0824fbc --- /dev/null +++ b/include/uapi/linux/if_alg.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * if_alg: User-space algorithm interface + * + * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _LINUX_IF_ALG_H +#define _LINUX_IF_ALG_H + +#include <linux/types.h> + +struct sockaddr_alg { + __u16 salg_family; + __u8 salg_type[14]; + __u32 salg_feat; + __u32 salg_mask; + __u8 salg_name[64]; +}; + +/* + * Linux v4.12 and later removed the 64-byte limit on salg_name[]; it's now an + * arbitrary-length field. We had to keep the original struct above for source + * compatibility with existing userspace programs, though. Use the new struct + * below if support for very long algorithm names is needed. To do this, + * allocate 'sizeof(struct sockaddr_alg_new) + strlen(algname) + 1' bytes, and + * copy algname (including the null terminator) into salg_name. + */ +struct sockaddr_alg_new { + __u16 salg_family; + __u8 salg_type[14]; + __u32 salg_feat; + __u32 salg_mask; + __u8 salg_name[]; +}; + +struct af_alg_iv { + __u32 ivlen; + __u8 iv[]; +}; + +/* Socket options */ +#define ALG_SET_KEY 1 +#define ALG_SET_IV 2 +#define ALG_SET_OP 3 +#define ALG_SET_AEAD_ASSOCLEN 4 +#define ALG_SET_AEAD_AUTHSIZE 5 +#define ALG_SET_DRBG_ENTROPY 6 +#define ALG_SET_KEY_BY_KEY_SERIAL 7 + +/* Operations */ +#define ALG_OP_DECRYPT 0 +#define ALG_OP_ENCRYPT 1 + +#endif /* _LINUX_IF_ALG_H */ diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h new file mode 100644 index 0000000..12d06bb --- /dev/null +++ b/include/uapi/linux/if_arp.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the ARP (RFC 826) protocol. + * + * Version: @(#)if_arp.h 1.0.1 04/16/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 + * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Florian La Roche, + * Jonathan Layes <layes@loran.com> + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IF_ARP_H +#define _LINUX_IF_ARP_H + +#include <linux/netdevice.h> + +/* ARP protocol HARDWARE identifiers. */ +#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ +#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ +#define ARPHRD_EETHER 2 /* Experimental Ethernet */ +#define ARPHRD_AX25 3 /* AX.25 Level 2 */ +#define ARPHRD_PRONET 4 /* PROnet token ring */ +#define ARPHRD_CHAOS 5 /* Chaosnet */ +#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ +#define ARPHRD_ARCNET 7 /* ARCnet */ +#define ARPHRD_APPLETLK 8 /* APPLEtalk */ +#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ +#define ARPHRD_ATM 19 /* ATM */ +#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ +#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ +#define ARPHRD_EUI64 27 /* EUI-64 */ +#define ARPHRD_INFINIBAND 32 /* InfiniBand */ + +/* Dummy types for non ARP hardware */ +#define ARPHRD_SLIP 256 +#define ARPHRD_CSLIP 257 +#define ARPHRD_SLIP6 258 +#define ARPHRD_CSLIP6 259 +#define ARPHRD_RSRVD 260 /* Notional KISS type */ +#define ARPHRD_ADAPT 264 +#define ARPHRD_ROSE 270 +#define ARPHRD_X25 271 /* CCITT X.25 */ +#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ +#define ARPHRD_CAN 280 /* Controller Area Network */ +#define ARPHRD_MCTP 290 +#define ARPHRD_PPP 512 +#define ARPHRD_CISCO 513 /* Cisco HDLC */ +#define ARPHRD_HDLC ARPHRD_CISCO +#define ARPHRD_LAPB 516 /* LAPB */ +#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ +#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ +#define ARPHRD_RAWIP 519 /* Raw IP */ + +#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ +#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ +#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ +#define ARPHRD_SKIP 771 /* SKIP vif */ +#define ARPHRD_LOOPBACK 772 /* Loopback device */ +#define ARPHRD_LOCALTLK 773 /* Localtalk device */ +#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ +#define ARPHRD_BIF 775 /* AP1000 BIF */ +#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ +#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ +#define ARPHRD_IPGRE 778 /* GRE over IP */ +#define ARPHRD_PIMREG 779 /* PIMSM register interface */ +#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ +#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ +#define ARPHRD_ECONET 782 /* Acorn Econet */ +#define ARPHRD_IRDA 783 /* Linux-IrDA */ +/* ARP works differently on different FC media .. so */ +#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ +#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ +#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ +#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ + /* 787->799 reserved for fibrechannel media types */ +#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ +#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ +#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ +#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ + +#define ARPHRD_PHONET 820 /* PhoNet media type */ +#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ +#define ARPHRD_CAIF 822 /* CAIF media type */ +#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ +#define ARPHRD_NETLINK 824 /* Netlink header */ +#define ARPHRD_6LOWPAN 825 /* IPv6 over LoWPAN */ +#define ARPHRD_VSOCKMON 826 /* Vsock monitor header */ + +#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ +#define ARPHRD_NONE 0xFFFE /* zero header length */ + +/* ARP protocol opcodes. */ +#define ARPOP_REQUEST 1 /* ARP request */ +#define ARPOP_REPLY 2 /* ARP reply */ +#define ARPOP_RREQUEST 3 /* RARP request */ +#define ARPOP_RREPLY 4 /* RARP reply */ +#define ARPOP_InREQUEST 8 /* InARP request */ +#define ARPOP_InREPLY 9 /* InARP reply */ +#define ARPOP_NAK 10 /* (ATM)ARP NAK */ + + +/* ARP ioctl request. */ +struct arpreq { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ + char arp_dev[IFNAMSIZ]; +}; + +struct arpreq_old { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ +}; + +/* ARP Flag values. */ +#define ATF_COM 0x02 /* completed entry (ha valid) */ +#define ATF_PERM 0x04 /* permanent entry */ +#define ATF_PUBL 0x08 /* publish entry */ +#define ATF_USETRAILERS 0x10 /* has requested trailers */ +#define ATF_NETMASK 0x20 /* want to use a netmask (only + for proxy entries) */ +#define ATF_DONTPUB 0x40 /* don't answer this addresses */ + +/* + * This structure defines an ethernet arp header. + */ + +struct arphdr { + __be16 ar_hrd; /* format of hardware address */ + __be16 ar_pro; /* format of protocol address */ + unsigned char ar_hln; /* length of hardware address */ + unsigned char ar_pln; /* length of protocol address */ + __be16 ar_op; /* ARP opcode (command) */ + +#if 0 + /* + * Ethernet looks like this : This bit is variable sized however... + */ + unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ + unsigned char ar_sip[4]; /* sender IP address */ + unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ + unsigned char ar_tip[4]; /* target IP address */ +#endif + +}; + + +#endif /* _LINUX_IF_ARP_H */ diff --git a/include/uapi/linux/if_bonding.h b/include/uapi/linux/if_bonding.h new file mode 100644 index 0000000..d174914 --- /dev/null +++ b/include/uapi/linux/if_bonding.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ +/* + * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'. + * + * + * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes + * NCM: Network and Communications Management, Inc. + * + * BUT, I'm the one who modified it for ethernet, so: + * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov + * + * This software may be used and distributed according to the terms + * of the GNU Public License, incorporated herein by reference. + * + * 2003/03/18 - Amir Noam <amir.noam at intel dot com> + * - Added support for getting slave's speed and duplex via ethtool. + * Needed for 802.3ad and other future modes. + * + * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Shmulik Hen <shmulik.hen at intel dot com> + * - Enable support of modes that need to use the unique mac address of + * each slave. + * + * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Amir Noam <amir.noam at intel dot com> + * - Moved driver's private data types to bonding.h + * + * 2003/03/18 - Amir Noam <amir.noam at intel dot com>, + * Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Shmulik Hen <shmulik.hen at intel dot com> + * - Added support for IEEE 802.3ad Dynamic link aggregation mode. + * + * 2003/05/01 - Amir Noam <amir.noam at intel dot com> + * - Added ABI version control to restore compatibility between + * new/old ifenslave and new/old bonding. + * + * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> + * - Code cleanup and style changes + * + * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov> + * - added definitions for various XOR hashing policies + */ + +#ifndef _LINUX_IF_BONDING_H +#define _LINUX_IF_BONDING_H + +#include <linux/if.h> +#include <linux/types.h> +#include <linux/if_ether.h> + +/* userland - kernel ABI version (2003/05/08) */ +#define BOND_ABI_VERSION 2 + +/* + * We can remove these ioctl definitions in 2.5. People should use the + * SIOC*** versions of them instead + */ +#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE) +#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1) +#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2) +#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11) +#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12) +#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13) + +#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY) + +#define BOND_MODE_ROUNDROBIN 0 +#define BOND_MODE_ACTIVEBACKUP 1 +#define BOND_MODE_XOR 2 +#define BOND_MODE_BROADCAST 3 +#define BOND_MODE_8023AD 4 +#define BOND_MODE_TLB 5 +#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */ + +/* each slave's link has 4 states */ +#define BOND_LINK_UP 0 /* link is up and running */ +#define BOND_LINK_FAIL 1 /* link has just gone down */ +#define BOND_LINK_DOWN 2 /* link has been down for too long time */ +#define BOND_LINK_BACK 3 /* link is going back */ + +/* each slave has several states */ +#define BOND_STATE_ACTIVE 0 /* link is active */ +#define BOND_STATE_BACKUP 1 /* link is backup */ + +#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */ + +#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */ + +#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */ + +/* hashing types */ +#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */ +#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */ +#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */ +#define BOND_XMIT_POLICY_ENCAP23 3 /* encapsulated layer 2+3 */ +#define BOND_XMIT_POLICY_ENCAP34 4 /* encapsulated layer 3+4 */ +#define BOND_XMIT_POLICY_VLAN_SRCMAC 5 /* vlan + source MAC */ + +/* 802.3ad port state definitions (43.4.2.2 in the 802.3ad standard) */ +#define LACP_STATE_LACP_ACTIVITY 0x1 +#define LACP_STATE_LACP_TIMEOUT 0x2 +#define LACP_STATE_AGGREGATION 0x4 +#define LACP_STATE_SYNCHRONIZATION 0x8 +#define LACP_STATE_COLLECTING 0x10 +#define LACP_STATE_DISTRIBUTING 0x20 +#define LACP_STATE_DEFAULTED 0x40 +#define LACP_STATE_EXPIRED 0x80 + +typedef struct ifbond { + __s32 bond_mode; + __s32 num_slaves; + __s32 miimon; +} ifbond; + +typedef struct ifslave { + __s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */ + char slave_name[IFNAMSIZ]; + __s8 link; + __s8 state; + __u32 link_failure_count; +} ifslave; + +struct ad_info { + __u16 aggregator_id; + __u16 ports; + __u16 actor_key; + __u16 partner_key; + __u8 partner_system[ETH_ALEN]; +}; + +/* Embedded inside LINK_XSTATS_TYPE_BOND */ +enum { + BOND_XSTATS_UNSPEC, + BOND_XSTATS_3AD, + __BOND_XSTATS_MAX +}; +#define BOND_XSTATS_MAX (__BOND_XSTATS_MAX - 1) + +/* Embedded inside BOND_XSTATS_3AD */ +enum { + BOND_3AD_STAT_LACPDU_RX, + BOND_3AD_STAT_LACPDU_TX, + BOND_3AD_STAT_LACPDU_UNKNOWN_RX, + BOND_3AD_STAT_LACPDU_ILLEGAL_RX, + BOND_3AD_STAT_MARKER_RX, + BOND_3AD_STAT_MARKER_TX, + BOND_3AD_STAT_MARKER_RESP_RX, + BOND_3AD_STAT_MARKER_RESP_TX, + BOND_3AD_STAT_MARKER_UNKNOWN_RX, + BOND_3AD_STAT_PAD, + __BOND_3AD_STAT_MAX +}; +#define BOND_3AD_STAT_MAX (__BOND_3AD_STAT_MAX - 1) + +#endif /* _LINUX_IF_BONDING_H */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h new file mode 100644 index 0000000..c206cf6 --- /dev/null +++ b/include/uapi/linux/if_bridge.h @@ -0,0 +1,858 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Linux ethernet bridge + * + * Authors: + * Lennert Buytenhek <buytenh@gnu.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_IF_BRIDGE_H +#define _LINUX_IF_BRIDGE_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/in6.h> + +#define SYSFS_BRIDGE_ATTR "bridge" +#define SYSFS_BRIDGE_FDB "brforward" +#define SYSFS_BRIDGE_PORT_SUBDIR "brif" +#define SYSFS_BRIDGE_PORT_ATTR "brport" +#define SYSFS_BRIDGE_PORT_LINK "bridge" + +#define BRCTL_VERSION 1 + +#define BRCTL_GET_VERSION 0 +#define BRCTL_GET_BRIDGES 1 +#define BRCTL_ADD_BRIDGE 2 +#define BRCTL_DEL_BRIDGE 3 +#define BRCTL_ADD_IF 4 +#define BRCTL_DEL_IF 5 +#define BRCTL_GET_BRIDGE_INFO 6 +#define BRCTL_GET_PORT_LIST 7 +#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 +#define BRCTL_SET_BRIDGE_HELLO_TIME 9 +#define BRCTL_SET_BRIDGE_MAX_AGE 10 +#define BRCTL_SET_AGEING_TIME 11 +#define BRCTL_SET_GC_INTERVAL 12 +#define BRCTL_GET_PORT_INFO 13 +#define BRCTL_SET_BRIDGE_STP_STATE 14 +#define BRCTL_SET_BRIDGE_PRIORITY 15 +#define BRCTL_SET_PORT_PRIORITY 16 +#define BRCTL_SET_PATH_COST 17 +#define BRCTL_GET_FDB_ENTRIES 18 + +#define BR_STATE_DISABLED 0 +#define BR_STATE_LISTENING 1 +#define BR_STATE_LEARNING 2 +#define BR_STATE_FORWARDING 3 +#define BR_STATE_BLOCKING 4 + +struct __bridge_info { + __u64 designated_root; + __u64 bridge_id; + __u32 root_path_cost; + __u32 max_age; + __u32 hello_time; + __u32 forward_delay; + __u32 bridge_max_age; + __u32 bridge_hello_time; + __u32 bridge_forward_delay; + __u8 topology_change; + __u8 topology_change_detected; + __u8 root_port; + __u8 stp_enabled; + __u32 ageing_time; + __u32 gc_interval; + __u32 hello_timer_value; + __u32 tcn_timer_value; + __u32 topology_change_timer_value; + __u32 gc_timer_value; +}; + +struct __port_info { + __u64 designated_root; + __u64 designated_bridge; + __u16 port_id; + __u16 designated_port; + __u32 path_cost; + __u32 designated_cost; + __u8 state; + __u8 top_change_ack; + __u8 config_pending; + __u8 unused0; + __u32 message_age_timer_value; + __u32 forward_delay_timer_value; + __u32 hold_timer_value; +}; + +struct __fdb_entry { + __u8 mac_addr[ETH_ALEN]; + __u8 port_no; + __u8 is_local; + __u32 ageing_timer_value; + __u8 port_hi; + __u8 pad0; + __u16 unused; +}; + +/* Bridge Flags */ +#define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ +#define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ + +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ +#define BRIDGE_MODE_UNDEF 0xFFFF /* mode undefined */ + +/* Bridge management nested attributes + * [IFLA_AF_SPEC] = { + * [IFLA_BRIDGE_FLAGS] + * [IFLA_BRIDGE_MODE] + * [IFLA_BRIDGE_VLAN_INFO] + * } + */ +enum { + IFLA_BRIDGE_FLAGS, + IFLA_BRIDGE_MODE, + IFLA_BRIDGE_VLAN_INFO, + IFLA_BRIDGE_VLAN_TUNNEL_INFO, + IFLA_BRIDGE_MRP, + IFLA_BRIDGE_CFM, + IFLA_BRIDGE_MST, + __IFLA_BRIDGE_MAX, +}; +#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) + +#define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ +#define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ +#define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ +#define BRIDGE_VLAN_INFO_RANGE_BEGIN (1<<3) /* VLAN is start of vlan range */ +#define BRIDGE_VLAN_INFO_RANGE_END (1<<4) /* VLAN is end of vlan range */ +#define BRIDGE_VLAN_INFO_BRENTRY (1<<5) /* Global bridge VLAN entry */ +#define BRIDGE_VLAN_INFO_ONLY_OPTS (1<<6) /* Skip create/delete/flags */ + +struct bridge_vlan_info { + __u16 flags; + __u16 vid; +}; + +enum { + IFLA_BRIDGE_VLAN_TUNNEL_UNSPEC, + IFLA_BRIDGE_VLAN_TUNNEL_ID, + IFLA_BRIDGE_VLAN_TUNNEL_VID, + IFLA_BRIDGE_VLAN_TUNNEL_FLAGS, + __IFLA_BRIDGE_VLAN_TUNNEL_MAX, +}; + +#define IFLA_BRIDGE_VLAN_TUNNEL_MAX (__IFLA_BRIDGE_VLAN_TUNNEL_MAX - 1) + +struct bridge_vlan_xstats { + __u64 rx_bytes; + __u64 rx_packets; + __u64 tx_bytes; + __u64 tx_packets; + __u16 vid; + __u16 flags; + __u32 pad2; +}; + +enum { + IFLA_BRIDGE_MRP_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE, + IFLA_BRIDGE_MRP_PORT_STATE, + IFLA_BRIDGE_MRP_PORT_ROLE, + IFLA_BRIDGE_MRP_RING_STATE, + IFLA_BRIDGE_MRP_RING_ROLE, + IFLA_BRIDGE_MRP_START_TEST, + IFLA_BRIDGE_MRP_INFO, + IFLA_BRIDGE_MRP_IN_ROLE, + IFLA_BRIDGE_MRP_IN_STATE, + IFLA_BRIDGE_MRP_START_IN_TEST, + __IFLA_BRIDGE_MRP_MAX, +}; + +#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_INSTANCE_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE_RING_ID, + IFLA_BRIDGE_MRP_INSTANCE_P_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_S_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_PRIO, + __IFLA_BRIDGE_MRP_INSTANCE_MAX, +}; + +#define IFLA_BRIDGE_MRP_INSTANCE_MAX (__IFLA_BRIDGE_MRP_INSTANCE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_STATE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_STATE_STATE, + __IFLA_BRIDGE_MRP_PORT_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_STATE_MAX (__IFLA_BRIDGE_MRP_PORT_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_ROLE_ROLE, + __IFLA_BRIDGE_MRP_PORT_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_ROLE_MAX (__IFLA_BRIDGE_MRP_PORT_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_STATE_UNSPEC, + IFLA_BRIDGE_MRP_RING_STATE_RING_ID, + IFLA_BRIDGE_MRP_RING_STATE_STATE, + __IFLA_BRIDGE_MRP_RING_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_STATE_MAX (__IFLA_BRIDGE_MRP_RING_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_RING_ROLE_RING_ID, + IFLA_BRIDGE_MRP_RING_ROLE_ROLE, + __IFLA_BRIDGE_MRP_RING_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_ROLE_MAX (__IFLA_BRIDGE_MRP_RING_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_START_TEST_UNSPEC, + IFLA_BRIDGE_MRP_START_TEST_RING_ID, + IFLA_BRIDGE_MRP_START_TEST_INTERVAL, + IFLA_BRIDGE_MRP_START_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_START_TEST_PERIOD, + IFLA_BRIDGE_MRP_START_TEST_MONITOR, + __IFLA_BRIDGE_MRP_START_TEST_MAX, +}; + +#define IFLA_BRIDGE_MRP_START_TEST_MAX (__IFLA_BRIDGE_MRP_START_TEST_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_INFO_UNSPEC, + IFLA_BRIDGE_MRP_INFO_RING_ID, + IFLA_BRIDGE_MRP_INFO_P_IFINDEX, + IFLA_BRIDGE_MRP_INFO_S_IFINDEX, + IFLA_BRIDGE_MRP_INFO_PRIO, + IFLA_BRIDGE_MRP_INFO_RING_STATE, + IFLA_BRIDGE_MRP_INFO_RING_ROLE, + IFLA_BRIDGE_MRP_INFO_TEST_INTERVAL, + IFLA_BRIDGE_MRP_INFO_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_INFO_TEST_MONITOR, + IFLA_BRIDGE_MRP_INFO_I_IFINDEX, + IFLA_BRIDGE_MRP_INFO_IN_STATE, + IFLA_BRIDGE_MRP_INFO_IN_ROLE, + IFLA_BRIDGE_MRP_INFO_IN_TEST_INTERVAL, + IFLA_BRIDGE_MRP_INFO_IN_TEST_MAX_MISS, + __IFLA_BRIDGE_MRP_INFO_MAX, +}; + +#define IFLA_BRIDGE_MRP_INFO_MAX (__IFLA_BRIDGE_MRP_INFO_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_IN_STATE_UNSPEC, + IFLA_BRIDGE_MRP_IN_STATE_IN_ID, + IFLA_BRIDGE_MRP_IN_STATE_STATE, + __IFLA_BRIDGE_MRP_IN_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_IN_STATE_MAX (__IFLA_BRIDGE_MRP_IN_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_IN_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_IN_ROLE_RING_ID, + IFLA_BRIDGE_MRP_IN_ROLE_IN_ID, + IFLA_BRIDGE_MRP_IN_ROLE_ROLE, + IFLA_BRIDGE_MRP_IN_ROLE_I_IFINDEX, + __IFLA_BRIDGE_MRP_IN_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_IN_ROLE_MAX (__IFLA_BRIDGE_MRP_IN_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_START_IN_TEST_UNSPEC, + IFLA_BRIDGE_MRP_START_IN_TEST_IN_ID, + IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, + IFLA_BRIDGE_MRP_START_IN_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_START_IN_TEST_PERIOD, + __IFLA_BRIDGE_MRP_START_IN_TEST_MAX, +}; + +#define IFLA_BRIDGE_MRP_START_IN_TEST_MAX (__IFLA_BRIDGE_MRP_START_IN_TEST_MAX - 1) + +struct br_mrp_instance { + __u32 ring_id; + __u32 p_ifindex; + __u32 s_ifindex; + __u16 prio; +}; + +struct br_mrp_ring_state { + __u32 ring_id; + __u32 ring_state; +}; + +struct br_mrp_ring_role { + __u32 ring_id; + __u32 ring_role; +}; + +struct br_mrp_start_test { + __u32 ring_id; + __u32 interval; + __u32 max_miss; + __u32 period; + __u32 monitor; +}; + +struct br_mrp_in_state { + __u32 in_state; + __u16 in_id; +}; + +struct br_mrp_in_role { + __u32 ring_id; + __u32 in_role; + __u32 i_ifindex; + __u16 in_id; +}; + +struct br_mrp_start_in_test { + __u32 interval; + __u32 max_miss; + __u32 period; + __u16 in_id; +}; + +enum { + IFLA_BRIDGE_CFM_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE, + IFLA_BRIDGE_CFM_MEP_DELETE, + IFLA_BRIDGE_CFM_MEP_CONFIG, + IFLA_BRIDGE_CFM_CC_CONFIG, + IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD, + IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE, + IFLA_BRIDGE_CFM_CC_RDI, + IFLA_BRIDGE_CFM_CC_CCM_TX, + IFLA_BRIDGE_CFM_MEP_CREATE_INFO, + IFLA_BRIDGE_CFM_MEP_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_RDI_INFO, + IFLA_BRIDGE_CFM_CC_CCM_TX_INFO, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO, + IFLA_BRIDGE_CFM_MEP_STATUS_INFO, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO, + __IFLA_BRIDGE_CFM_MAX, +}; + +#define IFLA_BRIDGE_CFM_MAX (__IFLA_BRIDGE_CFM_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CREATE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN, + IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION, + IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX, + __IFLA_BRIDGE_CFM_MEP_CREATE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CREATE_MAX (__IFLA_BRIDGE_CFM_MEP_CREATE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_DELETE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE, + __IFLA_BRIDGE_CFM_MEP_DELETE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_DELETE_MAX (__IFLA_BRIDGE_CFM_MEP_DELETE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC, + IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL, + IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID, + __IFLA_BRIDGE_CFM_MEP_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CONFIG_MAX (__IFLA_BRIDGE_CFM_MEP_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID, + __IFLA_BRIDGE_CFM_CC_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CONFIG_MAX (__IFLA_BRIDGE_CFM_CC_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_MEP_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_MEPID, + __IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX (__IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_RDI_UNSPEC, + IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, + IFLA_BRIDGE_CFM_CC_RDI_RDI, + __IFLA_BRIDGE_CFM_CC_RDI_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_RDI_MAX (__IFLA_BRIDGE_CFM_CC_RDI_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CCM_TX_UNSPEC, + IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE, + IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC, + IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE, + __IFLA_BRIDGE_CFM_CC_CCM_TX_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CCM_TX_MAX (__IFLA_BRIDGE_CFM_CC_CCM_TX_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN, + __IFLA_BRIDGE_CFM_MEP_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_STATUS_MAX (__IFLA_BRIDGE_CFM_MEP_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN, + __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_MST_UNSPEC, + IFLA_BRIDGE_MST_ENTRY, + __IFLA_BRIDGE_MST_MAX, +}; +#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1) + +enum { + IFLA_BRIDGE_MST_ENTRY_UNSPEC, + IFLA_BRIDGE_MST_ENTRY_MSTI, + IFLA_BRIDGE_MST_ENTRY_STATE, + __IFLA_BRIDGE_MST_ENTRY_MAX, +}; +#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1) + +struct bridge_stp_xstats { + __u64 transition_blk; + __u64 transition_fwd; + __u64 rx_bpdu; + __u64 tx_bpdu; + __u64 rx_tcn; + __u64 tx_tcn; +}; + +/* Bridge vlan RTM header */ +struct br_vlan_msg { + __u8 family; + __u8 reserved1; + __u16 reserved2; + __u32 ifindex; +}; + +enum { + BRIDGE_VLANDB_DUMP_UNSPEC, + BRIDGE_VLANDB_DUMP_FLAGS, + __BRIDGE_VLANDB_DUMP_MAX, +}; +#define BRIDGE_VLANDB_DUMP_MAX (__BRIDGE_VLANDB_DUMP_MAX - 1) + +/* flags used in BRIDGE_VLANDB_DUMP_FLAGS attribute to affect dumps */ +#define BRIDGE_VLANDB_DUMPF_STATS (1 << 0) /* Include stats in the dump */ +#define BRIDGE_VLANDB_DUMPF_GLOBAL (1 << 1) /* Dump global vlan options only */ + +/* Bridge vlan RTM attributes + * [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_INFO] + * ... + * } + * [BRIDGE_VLANDB_GLOBAL_OPTIONS] = { + * [BRIDGE_VLANDB_GOPTS_ID] + * ... + * } + */ +enum { + BRIDGE_VLANDB_UNSPEC, + BRIDGE_VLANDB_ENTRY, + BRIDGE_VLANDB_GLOBAL_OPTIONS, + __BRIDGE_VLANDB_MAX, +}; +#define BRIDGE_VLANDB_MAX (__BRIDGE_VLANDB_MAX - 1) + +enum { + BRIDGE_VLANDB_ENTRY_UNSPEC, + BRIDGE_VLANDB_ENTRY_INFO, + BRIDGE_VLANDB_ENTRY_RANGE, + BRIDGE_VLANDB_ENTRY_STATE, + BRIDGE_VLANDB_ENTRY_TUNNEL_INFO, + BRIDGE_VLANDB_ENTRY_STATS, + BRIDGE_VLANDB_ENTRY_MCAST_ROUTER, + BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, + BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, + BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, + __BRIDGE_VLANDB_ENTRY_MAX, +}; +#define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) + +/* [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] = { + * [BRIDGE_VLANDB_TINFO_ID] + * ... + * } + * } + */ +enum { + BRIDGE_VLANDB_TINFO_UNSPEC, + BRIDGE_VLANDB_TINFO_ID, + BRIDGE_VLANDB_TINFO_CMD, + __BRIDGE_VLANDB_TINFO_MAX, +}; +#define BRIDGE_VLANDB_TINFO_MAX (__BRIDGE_VLANDB_TINFO_MAX - 1) + +/* [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_STATS] = { + * [BRIDGE_VLANDB_STATS_RX_BYTES] + * ... + * } + * ... + * } + */ +enum { + BRIDGE_VLANDB_STATS_UNSPEC, + BRIDGE_VLANDB_STATS_RX_BYTES, + BRIDGE_VLANDB_STATS_RX_PACKETS, + BRIDGE_VLANDB_STATS_TX_BYTES, + BRIDGE_VLANDB_STATS_TX_PACKETS, + BRIDGE_VLANDB_STATS_PAD, + __BRIDGE_VLANDB_STATS_MAX, +}; +#define BRIDGE_VLANDB_STATS_MAX (__BRIDGE_VLANDB_STATS_MAX - 1) + +enum { + BRIDGE_VLANDB_GOPTS_UNSPEC, + BRIDGE_VLANDB_GOPTS_ID, + BRIDGE_VLANDB_GOPTS_RANGE, + BRIDGE_VLANDB_GOPTS_MCAST_SNOOPING, + BRIDGE_VLANDB_GOPTS_MCAST_IGMP_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_MLD_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_INTVL, + BRIDGE_VLANDB_GOPTS_PAD, + BRIDGE_VLANDB_GOPTS_MCAST_MEMBERSHIP_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_RESPONSE_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER, + BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE, + BRIDGE_VLANDB_GOPTS_MSTI, + __BRIDGE_VLANDB_GOPTS_MAX +}; +#define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1) + +/* Bridge multicast database attributes + * [MDBA_MDB] = { + * [MDBA_MDB_ENTRY] = { + * [MDBA_MDB_ENTRY_INFO] { + * struct br_mdb_entry + * [MDBA_MDB_EATTR attributes] + * } + * } + * } + * [MDBA_ROUTER] = { + * [MDBA_ROUTER_PORT] = { + * u32 ifindex + * [MDBA_ROUTER_PATTR attributes] + * } + * } + */ +enum { + MDBA_UNSPEC, + MDBA_MDB, + MDBA_ROUTER, + __MDBA_MAX, +}; +#define MDBA_MAX (__MDBA_MAX - 1) + +enum { + MDBA_MDB_UNSPEC, + MDBA_MDB_ENTRY, + __MDBA_MDB_MAX, +}; +#define MDBA_MDB_MAX (__MDBA_MDB_MAX - 1) + +enum { + MDBA_MDB_ENTRY_UNSPEC, + MDBA_MDB_ENTRY_INFO, + __MDBA_MDB_ENTRY_MAX, +}; +#define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) + +/* per mdb entry additional attributes */ +enum { + MDBA_MDB_EATTR_UNSPEC, + MDBA_MDB_EATTR_TIMER, + MDBA_MDB_EATTR_SRC_LIST, + MDBA_MDB_EATTR_GROUP_MODE, + MDBA_MDB_EATTR_SOURCE, + MDBA_MDB_EATTR_RTPROT, + MDBA_MDB_EATTR_DST, + MDBA_MDB_EATTR_DST_PORT, + MDBA_MDB_EATTR_VNI, + MDBA_MDB_EATTR_IFINDEX, + MDBA_MDB_EATTR_SRC_VNI, + __MDBA_MDB_EATTR_MAX +}; +#define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) + +/* per mdb entry source */ +enum { + MDBA_MDB_SRCLIST_UNSPEC, + MDBA_MDB_SRCLIST_ENTRY, + __MDBA_MDB_SRCLIST_MAX +}; +#define MDBA_MDB_SRCLIST_MAX (__MDBA_MDB_SRCLIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBA_MDB_SRCLIST_ENTRY + */ +enum { + MDBA_MDB_SRCATTR_UNSPEC, + MDBA_MDB_SRCATTR_ADDRESS, + MDBA_MDB_SRCATTR_TIMER, + __MDBA_MDB_SRCATTR_MAX +}; +#define MDBA_MDB_SRCATTR_MAX (__MDBA_MDB_SRCATTR_MAX - 1) + +/* multicast router types */ +enum { + MDB_RTR_TYPE_DISABLED, + MDB_RTR_TYPE_TEMP_QUERY, + MDB_RTR_TYPE_PERM, + MDB_RTR_TYPE_TEMP +}; + +enum { + MDBA_ROUTER_UNSPEC, + MDBA_ROUTER_PORT, + __MDBA_ROUTER_MAX, +}; +#define MDBA_ROUTER_MAX (__MDBA_ROUTER_MAX - 1) + +/* router port attributes */ +enum { + MDBA_ROUTER_PATTR_UNSPEC, + MDBA_ROUTER_PATTR_TIMER, + MDBA_ROUTER_PATTR_TYPE, + MDBA_ROUTER_PATTR_INET_TIMER, + MDBA_ROUTER_PATTR_INET6_TIMER, + MDBA_ROUTER_PATTR_VID, + __MDBA_ROUTER_PATTR_MAX +}; +#define MDBA_ROUTER_PATTR_MAX (__MDBA_ROUTER_PATTR_MAX - 1) + +struct br_port_msg { + __u8 family; + __u32 ifindex; +}; + +struct br_mdb_entry { + __u32 ifindex; +#define MDB_TEMPORARY 0 +#define MDB_PERMANENT 1 + __u8 state; +#define MDB_FLAGS_OFFLOAD (1 << 0) +#define MDB_FLAGS_FAST_LEAVE (1 << 1) +#define MDB_FLAGS_STAR_EXCL (1 << 2) +#define MDB_FLAGS_BLOCKED (1 << 3) + __u8 flags; + __u16 vid; + struct { + union { + __be32 ip4; + struct in6_addr ip6; + unsigned char mac_addr[ETH_ALEN]; + } u; + __be16 proto; + } addr; +}; + +enum { + MDBA_SET_ENTRY_UNSPEC, + MDBA_SET_ENTRY, + MDBA_SET_ENTRY_ATTRS, + __MDBA_SET_ENTRY_MAX, +}; +#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) + +/* [MDBA_GET_ENTRY] = { + * struct br_mdb_entry + * [MDBA_GET_ENTRY_ATTRS] = { + * [MDBE_ATTR_SOURCE] + * struct in_addr / struct in6_addr + * [MDBE_ATTR_SRC_VNI] + * u32 + * } + * } + */ +enum { + MDBA_GET_ENTRY_UNSPEC, + MDBA_GET_ENTRY, + MDBA_GET_ENTRY_ATTRS, + __MDBA_GET_ENTRY_MAX, +}; +#define MDBA_GET_ENTRY_MAX (__MDBA_GET_ENTRY_MAX - 1) + +/* [MDBA_SET_ENTRY_ATTRS] = { + * [MDBE_ATTR_xxx] + * ... + * } + */ +enum { + MDBE_ATTR_UNSPEC, + MDBE_ATTR_SOURCE, + MDBE_ATTR_SRC_LIST, + MDBE_ATTR_GROUP_MODE, + MDBE_ATTR_RTPROT, + MDBE_ATTR_DST, + MDBE_ATTR_DST_PORT, + MDBE_ATTR_VNI, + MDBE_ATTR_IFINDEX, + MDBE_ATTR_SRC_VNI, + MDBE_ATTR_STATE_MASK, + __MDBE_ATTR_MAX, +}; +#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) + +/* per mdb entry source */ +enum { + MDBE_SRC_LIST_UNSPEC, + MDBE_SRC_LIST_ENTRY, + __MDBE_SRC_LIST_MAX, +}; +#define MDBE_SRC_LIST_MAX (__MDBE_SRC_LIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBE_SRC_LIST_ENTRY + */ +enum { + MDBE_SRCATTR_UNSPEC, + MDBE_SRCATTR_ADDRESS, + __MDBE_SRCATTR_MAX, +}; +#define MDBE_SRCATTR_MAX (__MDBE_SRCATTR_MAX - 1) + +/* Embedded inside LINK_XSTATS_TYPE_BRIDGE */ +enum { + BRIDGE_XSTATS_UNSPEC, + BRIDGE_XSTATS_VLAN, + BRIDGE_XSTATS_MCAST, + BRIDGE_XSTATS_PAD, + BRIDGE_XSTATS_STP, + __BRIDGE_XSTATS_MAX +}; +#define BRIDGE_XSTATS_MAX (__BRIDGE_XSTATS_MAX - 1) + +enum { + BR_MCAST_DIR_RX, + BR_MCAST_DIR_TX, + BR_MCAST_DIR_SIZE +}; + +/* IGMP/MLD statistics */ +struct br_mcast_stats { + __u64 igmp_v1queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_v2queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_v3queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_leaves[BR_MCAST_DIR_SIZE]; + __u64 igmp_v1reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_v2reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_v3reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_parse_errors; + + __u64 mld_v1queries[BR_MCAST_DIR_SIZE]; + __u64 mld_v2queries[BR_MCAST_DIR_SIZE]; + __u64 mld_leaves[BR_MCAST_DIR_SIZE]; + __u64 mld_v1reports[BR_MCAST_DIR_SIZE]; + __u64 mld_v2reports[BR_MCAST_DIR_SIZE]; + __u64 mld_parse_errors; + + __u64 mcast_bytes[BR_MCAST_DIR_SIZE]; + __u64 mcast_packets[BR_MCAST_DIR_SIZE]; +}; + +/* bridge boolean options + * BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets + * BR_BOOLOPT_MCAST_VLAN_SNOOPING - control vlan multicast snooping + * + * IMPORTANT: if adding a new option do not forget to handle + * it in br_boolopt_toggle/get and bridge sysfs + */ +enum br_boolopt_id { + BR_BOOLOPT_NO_LL_LEARN, + BR_BOOLOPT_MCAST_VLAN_SNOOPING, + BR_BOOLOPT_MST_ENABLE, + BR_BOOLOPT_MAX +}; + +/* struct br_boolopt_multi - change multiple bridge boolean options + * + * @optval: new option values (bit per option) + * @optmask: options to change (bit per option) + */ +struct br_boolopt_multi { + __u32 optval; + __u32 optmask; +}; + +enum { + BRIDGE_QUERIER_UNSPEC, + BRIDGE_QUERIER_IP_ADDRESS, + BRIDGE_QUERIER_IP_PORT, + BRIDGE_QUERIER_IP_OTHER_TIMER, + BRIDGE_QUERIER_PAD, + BRIDGE_QUERIER_IPV6_ADDRESS, + BRIDGE_QUERIER_IPV6_PORT, + BRIDGE_QUERIER_IPV6_OTHER_TIMER, + __BRIDGE_QUERIER_MAX +}; +#define BRIDGE_QUERIER_MAX (__BRIDGE_QUERIER_MAX - 1) +#endif /* _LINUX_IF_BRIDGE_H */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h new file mode 100644 index 0000000..a1aff8e --- /dev/null +++ b/include/uapi/linux/if_ether.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Ethernet IEEE 802.3 interface. + * + * Version: @(#)if_ether.h 1.0.1a 02/08/94 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Donald Becker, <becker@super.org> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_IF_ETHER_H +#define _LINUX_IF_ETHER_H + +#include <linux/types.h> + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ + +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_TLEN 2 /* Octets in ethernet type field */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +#define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */ +#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */ + +/* + * These are the defined Ethernet Protocol ID's. + */ + +#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ +#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ +#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ +#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */ +#define ETH_P_ERSPAN2 0x22EB /* ERSPAN version 2 (type III) */ +#define ETH_P_IP 0x0800 /* Internet Protocol packet */ +#define ETH_P_X25 0x0805 /* CCITT X.25 */ +#define ETH_P_ARP 0x0806 /* Address Resolution packet */ +#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ +#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ +#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ +#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ +#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ +#define ETH_P_LAT 0x6004 /* DEC LAT */ +#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ +#define ETH_P_CUST 0x6006 /* DEC Customer use */ +#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ +#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ +#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ +#define ETH_P_ATALK 0x809B /* Appletalk DDP */ +#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */ +#define ETH_P_IPX 0x8137 /* IPX over DIX */ +#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ +#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ +#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ +#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol + * defined in draft-wilson-wrec-wccp-v2-00.txt */ +#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ +#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ +#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport + * over Ethernet + */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_PROFINET 0x8892 /* PROFINET */ +#define ETH_P_REALTEK 0x8899 /* Multiple proprietary protocols */ +#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_ETHERCAT 0x88A4 /* EtherCAT */ +#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ +#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ +#define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_LLDP 0x88CC /* Link Layer Discovery Protocol */ +#define ETH_P_MRP 0x88E3 /* Media Redundancy Protocol */ +#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ +#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_NCSI 0x88F8 /* NCSI protocol */ +#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_CFM 0x8902 /* Connectivity Fault Management */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ +#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */ +#define ETH_P_NSH 0x894F /* Network Service Header */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ +#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ + +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value + * then the frame is Ethernet II. Else it is 802.3 */ + +/* + * Non DIX types. Won't clash for 1500 types. + */ + +#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ +#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ +#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ +#define ETH_P_802_2 0x0004 /* 802.2 frames */ +#define ETH_P_SNAP 0x0005 /* Internal only */ +#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ +#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ +#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ +#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_CANXL 0x000E /* CANXL: eXtended frame Length */ +#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ +#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ +#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ +#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ +#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ +#define ETH_P_ECONET 0x0018 /* Acorn Econet */ +#define ETH_P_HDLC 0x0019 /* HDLC frames */ +#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ +#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ +#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ +#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ +#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ +#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ +#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and + * aggregation protocol + */ +#define ETH_P_MCTP 0x00FA /* Management component transport + * protocol packets + */ + +/* + * This is an Ethernet frame header. + */ + +/* allow libcs like musl to deactivate this, glibc does not implement this. */ +#ifndef __UAPI_DEF_ETHHDR +#define __UAPI_DEF_ETHHDR 1 +#endif + +#if __UAPI_DEF_ETHHDR +struct ethhdr { + unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ + unsigned char h_source[ETH_ALEN]; /* source ether addr */ + __be16 h_proto; /* packet type ID field */ +} __attribute__((packed)); +#endif + + +#endif /* _LINUX_IF_ETHER_H */ diff --git a/include/uapi/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h new file mode 100644 index 0000000..0fc33bf --- /dev/null +++ b/include/uapi/linux/if_infiniband.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */ +/* + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available at + * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD + * license, available in the LICENSE.TXT file accompanying this + * software. These details are also available at + * <http://www.openfabrics.org/software_license.htm>. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Copyright (c) 2004 Topspin Communications. All rights reserved. + * + * $Id$ + */ + +#ifndef _LINUX_IF_INFINIBAND_H +#define _LINUX_IF_INFINIBAND_H + +#define INFINIBAND_ALEN 20 /* Octets in IPoIB HW addr */ + +#endif /* _LINUX_IF_INFINIBAND_H */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h new file mode 100644 index 0000000..d17271f --- /dev/null +++ b/include/uapi/linux/if_link.h @@ -0,0 +1,1956 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_IF_LINK_H +#define _LINUX_IF_LINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +/* This struct should be in sync with struct rtnl_link_stats64 */ +struct rtnl_link_stats { + __u32 rx_packets; + __u32 tx_packets; + __u32 rx_bytes; + __u32 tx_bytes; + __u32 rx_errors; + __u32 tx_errors; + __u32 rx_dropped; + __u32 tx_dropped; + __u32 multicast; + __u32 collisions; + /* detailed rx_errors: */ + __u32 rx_length_errors; + __u32 rx_over_errors; + __u32 rx_crc_errors; + __u32 rx_frame_errors; + __u32 rx_fifo_errors; + __u32 rx_missed_errors; + + /* detailed tx_errors */ + __u32 tx_aborted_errors; + __u32 tx_carrier_errors; + __u32 tx_fifo_errors; + __u32 tx_heartbeat_errors; + __u32 tx_window_errors; + + /* for cslip etc */ + __u32 rx_compressed; + __u32 tx_compressed; + + __u32 rx_nohandler; +}; + +/** + * struct rtnl_link_stats64 - The main device statistics structure. + * + * @rx_packets: Number of good packets received by the interface. + * For hardware interfaces counts all good packets received from the device + * by the host, including packets which host had to drop at various stages + * of processing (even in the driver). + * + * @tx_packets: Number of packets successfully transmitted. + * For hardware interfaces counts packets which host was able to successfully + * hand over to the device, which does not necessarily mean that packets + * had been successfully transmitted out of the device, only that device + * acknowledged it copied them out of host memory. + * + * @rx_bytes: Number of good received bytes, corresponding to @rx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @rx_errors: Total number of bad packets received on this network device. + * This counter must include events counted by @rx_length_errors, + * @rx_crc_errors, @rx_frame_errors and other errors not otherwise + * counted. + * + * @tx_errors: Total number of transmit problems. + * This counter must include events counter by @tx_aborted_errors, + * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors, + * @tx_window_errors and other errors not otherwise counted. + * + * @rx_dropped: Number of packets received but not processed, + * e.g. due to lack of resources or unsupported protocol. + * For hardware interfaces this counter may include packets discarded + * due to L2 address filtering but should not include packets dropped + * by the device due to buffer exhaustion which are counted separately in + * @rx_missed_errors (since procfs folds those two counters together). + * + * @tx_dropped: Number of packets dropped on their way to transmission, + * e.g. due to lack of resources. + * + * @multicast: Multicast packets received. + * For hardware interfaces this statistic is commonly calculated + * at the device level (unlike @rx_packets) and therefore may include + * packets which did not reach the host. + * + * For IEEE 802.3 devices this counter may be equivalent to: + * + * - 30.3.1.1.21 aMulticastFramesReceivedOK + * + * @collisions: Number of collisions during packet transmissions. + * + * @rx_length_errors: Number of packets dropped due to invalid length. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to a sum + * of the following attributes: + * + * - 30.3.1.1.23 aInRangeLengthErrors + * - 30.3.1.1.24 aOutOfRangeLengthField + * - 30.3.1.1.25 aFrameTooLongErrors + * + * @rx_over_errors: Receiver FIFO overflow event counter. + * + * Historically the count of overflow events. Such events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * The recommended interpretation for high speed interfaces is - + * number of packets dropped because they did not fit into buffers + * provided by the host, e.g. packets larger than MTU or next buffer + * in the ring was not available for a scatter transfer. + * + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * This statistics was historically used interchangeably with + * @rx_fifo_errors. + * + * This statistic corresponds to hardware events and is not commonly used + * on software devices. + * + * @rx_crc_errors: Number of packets received with a CRC error. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.6 aFrameCheckSequenceErrors + * + * @rx_frame_errors: Receiver frame alignment errors. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to: + * + * - 30.3.1.1.7 aAlignmentErrors + * + * @rx_fifo_errors: Receiver FIFO error counter. + * + * Historically the count of overflow events. Those events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * This statistics was used interchangeably with @rx_over_errors. + * Not recommended for use in drivers for high speed interfaces. + * + * This statistic is used on software devices, e.g. to count software + * packet queue overflow (can) or sequencing errors (GRE). + * + * @rx_missed_errors: Count of packets missed by the host. + * Folded into the "drop" counter in `/proc/net/dev`. + * + * Counts number of packets dropped by the device due to lack + * of buffer space. This usually indicates that the host interface + * is slower than the network interface, or host is not keeping up + * with the receive packet rate. + * + * This statistic corresponds to hardware events and is not used + * on software devices. + * + * @tx_aborted_errors: + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * For IEEE 802.3 devices capable of half-duplex operation this counter + * must be equivalent to: + * + * - 30.3.1.1.11 aFramesAbortedDueToXSColls + * + * High speed interfaces may use this counter as a general device + * discard counter. + * + * @tx_carrier_errors: Number of frame transmission errors due to loss + * of carrier during transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.13 aCarrierSenseErrors + * + * @tx_fifo_errors: Number of frame transmission errors due to device + * FIFO underrun / underflow. This condition occurs when the device + * begins transmission of a frame but is unable to deliver the + * entire frame to the transmitter in time for transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for + * old half-duplex Ethernet. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices possibly equivalent to: + * + * - 30.3.2.1.4 aSQETestErrors + * + * @tx_window_errors: Number of frame transmission errors due + * to late collisions (for Ethernet - after the first 64B of transmission). + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.10 aLateCollisions + * + * @rx_compressed: Number of correctly received compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @tx_compressed: Number of transmitted compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @rx_nohandler: Number of packets received on the interface + * but dropped by the networking stack because the device is + * not designated to receive packets (e.g. backup link in a bond). + * + * @rx_otherhost_dropped: Number of packets dropped due to mismatch + * in destination MAC address. + */ +struct rtnl_link_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; + __u64 collisions; + + /* detailed rx_errors: */ + __u64 rx_length_errors; + __u64 rx_over_errors; + __u64 rx_crc_errors; + __u64 rx_frame_errors; + __u64 rx_fifo_errors; + __u64 rx_missed_errors; + + /* detailed tx_errors */ + __u64 tx_aborted_errors; + __u64 tx_carrier_errors; + __u64 tx_fifo_errors; + __u64 tx_heartbeat_errors; + __u64 tx_window_errors; + + /* for cslip etc */ + __u64 rx_compressed; + __u64 tx_compressed; + __u64 rx_nohandler; + + __u64 rx_otherhost_dropped; +}; + +/* Subset of link stats useful for in-HW collection. Meaning of the fields is as + * for struct rtnl_link_stats64. + */ +struct rtnl_hw_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; +}; + +/* The struct should be in sync with struct ifmap */ +struct rtnl_link_ifmap { + __u64 mem_start; + __u64 mem_end; + __u64 base_addr; + __u16 irq; + __u8 dma; + __u8 port; +}; + +/* + * IFLA_AF_SPEC + * Contains nested attributes for address family specific attributes. + * Each address family may create a attribute with the address family + * number as type and create its own attribute structure in it. + * + * Example: + * [IFLA_AF_SPEC] = { + * [AF_INET] = { + * [IFLA_INET_CONF] = ..., + * }, + * [AF_INET6] = { + * [IFLA_INET6_FLAGS] = ..., + * [IFLA_INET6_CONF] = ..., + * } + * } + */ + +enum { + IFLA_UNSPEC, + IFLA_ADDRESS, + IFLA_BROADCAST, + IFLA_IFNAME, + IFLA_MTU, + IFLA_LINK, + IFLA_QDISC, + IFLA_STATS, + IFLA_COST, +#define IFLA_COST IFLA_COST + IFLA_PRIORITY, +#define IFLA_PRIORITY IFLA_PRIORITY + IFLA_MASTER, +#define IFLA_MASTER IFLA_MASTER + IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ +#define IFLA_WIRELESS IFLA_WIRELESS + IFLA_PROTINFO, /* Protocol specific information for a link */ +#define IFLA_PROTINFO IFLA_PROTINFO + IFLA_TXQLEN, +#define IFLA_TXQLEN IFLA_TXQLEN + IFLA_MAP, +#define IFLA_MAP IFLA_MAP + IFLA_WEIGHT, +#define IFLA_WEIGHT IFLA_WEIGHT + IFLA_OPERSTATE, + IFLA_LINKMODE, + IFLA_LINKINFO, +#define IFLA_LINKINFO IFLA_LINKINFO + IFLA_NET_NS_PID, + IFLA_IFALIAS, + IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ + IFLA_VFINFO_LIST, + IFLA_STATS64, + IFLA_VF_PORTS, + IFLA_PORT_SELF, + IFLA_AF_SPEC, + IFLA_GROUP, /* Group the device belongs to */ + IFLA_NET_NS_FD, + IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ + IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ +#define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, + IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, + IFLA_PHYS_SWITCH_ID, + IFLA_LINK_NETNSID, + IFLA_PHYS_PORT_NAME, + IFLA_PROTO_DOWN, + IFLA_GSO_MAX_SEGS, + IFLA_GSO_MAX_SIZE, + IFLA_PAD, + IFLA_XDP, + IFLA_EVENT, + IFLA_NEW_NETNSID, + IFLA_IF_NETNSID, + IFLA_TARGET_NETNSID = IFLA_IF_NETNSID, /* new alias */ + IFLA_CARRIER_UP_COUNT, + IFLA_CARRIER_DOWN_COUNT, + IFLA_NEW_IFINDEX, + IFLA_MIN_MTU, + IFLA_MAX_MTU, + IFLA_PROP_LIST, + IFLA_ALT_IFNAME, /* Alternative ifname */ + IFLA_PERM_ADDRESS, + IFLA_PROTO_DOWN_REASON, + + /* device (sysfs) name as parent, used instead + * of IFLA_LINK where there's no parent netdev + */ + IFLA_PARENT_DEV_NAME, + IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, + IFLA_ALLMULTI, /* Allmulti count: > 0 means acts ALLMULTI */ + + IFLA_DEVLINK_PORT, + + IFLA_GSO_IPV4_MAX_SIZE, + IFLA_GRO_IPV4_MAX_SIZE, + IFLA_DPLL_PIN, + __IFLA_MAX +}; + + +#define IFLA_MAX (__IFLA_MAX - 1) + +enum { + IFLA_PROTO_DOWN_REASON_UNSPEC, + IFLA_PROTO_DOWN_REASON_MASK, /* u32, mask for reason bits */ + IFLA_PROTO_DOWN_REASON_VALUE, /* u32, reason bit value */ + + __IFLA_PROTO_DOWN_REASON_CNT, + IFLA_PROTO_DOWN_REASON_MAX = __IFLA_PROTO_DOWN_REASON_CNT - 1 +}; + +/* backwards compatibility for userspace */ +#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) +#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) + +enum { + IFLA_INET_UNSPEC, + IFLA_INET_CONF, + __IFLA_INET_MAX, +}; + +#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) + +/* ifi_flags. + + IFF_* flags. + + The only change is: + IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are + more not changeable by user. They describe link media + characteristics and set by device driver. + + Comments: + - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid + - If neither of these three flags are set; + the interface is NBMA. + + - IFF_MULTICAST does not mean anything special: + multicasts can be used on all not-NBMA links. + IFF_MULTICAST means that this media uses special encapsulation + for multicast frames. Apparently, all IFF_POINTOPOINT and + IFF_BROADCAST devices are able to use multicasts too. + */ + +/* IFLA_LINK. + For usual devices it is equal ifi_index. + If it is a "virtual interface" (f.e. tunnel), ifi_link + can point to real physical interface (f.e. for bandwidth calculations), + or maybe 0, what means, that real media is unknown (usual + for IPIP tunnels, when route to endpoint is allowed to change) + */ + +/* Subtype attributes for IFLA_PROTINFO */ +enum { + IFLA_INET6_UNSPEC, + IFLA_INET6_FLAGS, /* link flags */ + IFLA_INET6_CONF, /* sysctl parameters */ + IFLA_INET6_STATS, /* statistics */ + IFLA_INET6_MCAST, /* MC things. What of them? */ + IFLA_INET6_CACHEINFO, /* time values and max reasm size */ + IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ + IFLA_INET6_TOKEN, /* device token */ + IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */ + IFLA_INET6_RA_MTU, /* mtu carried in the RA message */ + __IFLA_INET6_MAX +}; + +#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) + +enum in6_addr_gen_mode { + IN6_ADDR_GEN_MODE_EUI64, + IN6_ADDR_GEN_MODE_NONE, + IN6_ADDR_GEN_MODE_STABLE_PRIVACY, + IN6_ADDR_GEN_MODE_RANDOM, +}; + +/* Bridge section */ + +/** + * DOC: Bridge enum definition + * + * Please *note* that the timer values in the following section are expected + * in clock_t format, which is seconds multiplied by USER_HZ (generally + * defined as 100). + * + * @IFLA_BR_FORWARD_DELAY + * The bridge forwarding delay is the time spent in LISTENING state + * (before moving to LEARNING) and in LEARNING state (before moving + * to FORWARDING). Only relevant if STP is enabled. + * + * The valid values are between (2 * USER_HZ) and (30 * USER_HZ). + * The default value is (15 * USER_HZ). + * + * @IFLA_BR_HELLO_TIME + * The time between hello packets sent by the bridge, when it is a root + * bridge or a designated bridge. Only relevant if STP is enabled. + * + * The valid values are between (1 * USER_HZ) and (10 * USER_HZ). + * The default value is (2 * USER_HZ). + * + * @IFLA_BR_MAX_AGE + * The hello packet timeout is the time until another bridge in the + * spanning tree is assumed to be dead, after reception of its last hello + * message. Only relevant if STP is enabled. + * + * The valid values are between (6 * USER_HZ) and (40 * USER_HZ). + * The default value is (20 * USER_HZ). + * + * @IFLA_BR_AGEING_TIME + * Configure the bridge's FDB entries aging time. It is the time a MAC + * address will be kept in the FDB after a packet has been received from + * that address. After this time has passed, entries are cleaned up. + * Allow values outside the 802.1 standard specification for special cases: + * + * * 0 - entry never ages (all permanent) + * * 1 - entry disappears (no persistence) + * + * The default value is (300 * USER_HZ). + * + * @IFLA_BR_STP_STATE + * Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off + * (*IFLA_BR_STP_STATE* == 0) for this bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_PRIORITY + * Set this bridge's spanning tree priority, used during STP root bridge + * election. + * + * The valid values are between 0 and 65535. + * + * @IFLA_BR_VLAN_FILTERING + * Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off + * (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not + * consider the VLAN tag when handling packets. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_PROTOCOL + * Set the protocol used for VLAN filtering. + * + * The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value + * is 0x8100(802.1Q). + * + * @IFLA_BR_GROUP_FWD_MASK + * The group forwarding mask. This is the bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses (of the form 01:80:C2:00:00:0X). + * + * The default value is 0, which means the bridge does not forward any + * link-local frames coming on this port. + * + * @IFLA_BR_ROOT_ID + * The bridge root id, read only. + * + * @IFLA_BR_BRIDGE_ID + * The bridge id, read only. + * + * @IFLA_BR_ROOT_PORT + * The bridge root port, read only. + * + * @IFLA_BR_ROOT_PATH_COST + * The bridge root path cost, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE + * The bridge topology change, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED + * The bridge topology change detected, read only. + * + * @IFLA_BR_HELLO_TIMER + * The bridge hello timer, read only. + * + * @IFLA_BR_TCN_TIMER + * The bridge tcn timer, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_TIMER + * The bridge topology change timer, read only. + * + * @IFLA_BR_GC_TIMER + * The bridge gc timer, read only. + * + * @IFLA_BR_GROUP_ADDR + * Set the MAC address of the multicast group this bridge uses for STP. + * The address must be a link-local address in standard Ethernet MAC address + * format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f]. + * + * The default value is 0. + * + * @IFLA_BR_FDB_FLUSH + * Flush bridge's fdb dynamic entries. + * + * @IFLA_BR_MCAST_ROUTER + * Set bridge's multicast router if IGMP snooping is enabled. + * The valid values are: + * + * * 0 - disabled. + * * 1 - automatic (queried). + * * 2 - permanently enabled. + * + * The default value is 1. + * + * @IFLA_BR_MCAST_SNOOPING + * Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off + * (*IFLA_BR_MCAST_SNOOPING* == 0). + * + * The default value is 1. + * + * @IFLA_BR_MCAST_QUERY_USE_IFADDR + * If enabled use the bridge's own IP address as source address for IGMP + * queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0 + * (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0). + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_QUERIER + * Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable + * (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast + * queries by the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_HASH_ELASTICITY + * Set multicast database hash elasticity, It is the maximum chain length in + * the multicast hash table. This attribute is *deprecated* and the value + * is always 16. + * + * @IFLA_BR_MCAST_HASH_MAX + * Set maximum size of the multicast hash table + * + * The default value is 4096, the value must be a power of 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_CNT + * The Last Member Query Count is the number of Group-Specific Queries + * sent before the router assumes there are no local members. The Last + * Member Query Count is also the number of Group-and-Source-Specific + * Queries sent before the router assumes there are no listeners for a + * particular source. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_STARTUP_QUERY_CNT + * The Startup Query Count is the number of Queries sent out on startup, + * separated by the Startup Query Interval. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_INTVL + * The Last Member Query Interval is the Max Response Time inserted into + * Group-Specific Queries sent in response to Leave Group messages, and + * is also the amount of time between Group-Specific Query messages. + * + * The default value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_MEMBERSHIP_INTVL + * The interval after which the bridge will leave a group, if no membership + * reports for this group are received. + * + * The default value is (260 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERIER_INTVL + * The interval between queries sent by other routers. if no queries are + * seen after this delay has passed, the bridge will start to send its own + * queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled). + * + * The default value is (255 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_INTVL + * The Query Interval is the interval between General Queries sent by + * the Querier. + * + * The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL + * The Max Response Time used to calculate the Max Resp Code inserted + * into the periodic General Queries. + * + * The default value is (10 * USER_HZ). + * + * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL + * The interval between queries in the startup phase. + * + * The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_NF_CALL_IPTABLES + * Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0) + * iptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_IP6TABLES + * Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0) + * ip6tables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_ARPTABLES + * Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0) + * arptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_DEFAULT_PVID + * VLAN ID applied to untagged and priority-tagged incoming packets. + * + * The default value is 1. Setting to the special value 0 makes all ports of + * this bridge not have a PVID by default, which means that they will + * not accept VLAN-untagged traffic. + * + * @IFLA_BR_PAD + * Bridge attribute padding type for netlink message. + * + * @IFLA_BR_VLAN_STATS_ENABLED + * Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable + * (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_STATS_ENABLED + * Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable + * (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats + * accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_IGMP_VERSION + * Set the IGMP version. + * + * The valid values are 2 and 3. The default value is 2. + * + * @IFLA_BR_MCAST_MLD_VERSION + * Set the MLD version. + * + * The valid values are 1 and 2. The default value is 1. + * + * @IFLA_BR_VLAN_STATS_PER_PORT + * Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable + * (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting. + * Can be changed only when there are no port VLANs configured. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MULTI_BOOLOPT + * The multi_boolopt is used to control new boolean options to avoid adding + * new netlink attributes. You can look at ``enum br_boolopt_id`` for those + * options. + * + * @IFLA_BR_MCAST_QUERIER_STATE + * Bridge mcast querier states, read only. + * + * @IFLA_BR_FDB_N_LEARNED + * The number of dynamically learned FDB entries for the current bridge, + * read only. + * + * @IFLA_BR_FDB_MAX_LEARNED + * Set the number of max dynamically learned FDB entries for the current + * bridge. + */ +enum { + IFLA_BR_UNSPEC, + IFLA_BR_FORWARD_DELAY, + IFLA_BR_HELLO_TIME, + IFLA_BR_MAX_AGE, + IFLA_BR_AGEING_TIME, + IFLA_BR_STP_STATE, + IFLA_BR_PRIORITY, + IFLA_BR_VLAN_FILTERING, + IFLA_BR_VLAN_PROTOCOL, + IFLA_BR_GROUP_FWD_MASK, + IFLA_BR_ROOT_ID, + IFLA_BR_BRIDGE_ID, + IFLA_BR_ROOT_PORT, + IFLA_BR_ROOT_PATH_COST, + IFLA_BR_TOPOLOGY_CHANGE, + IFLA_BR_TOPOLOGY_CHANGE_DETECTED, + IFLA_BR_HELLO_TIMER, + IFLA_BR_TCN_TIMER, + IFLA_BR_TOPOLOGY_CHANGE_TIMER, + IFLA_BR_GC_TIMER, + IFLA_BR_GROUP_ADDR, + IFLA_BR_FDB_FLUSH, + IFLA_BR_MCAST_ROUTER, + IFLA_BR_MCAST_SNOOPING, + IFLA_BR_MCAST_QUERY_USE_IFADDR, + IFLA_BR_MCAST_QUERIER, + IFLA_BR_MCAST_HASH_ELASTICITY, + IFLA_BR_MCAST_HASH_MAX, + IFLA_BR_MCAST_LAST_MEMBER_CNT, + IFLA_BR_MCAST_STARTUP_QUERY_CNT, + IFLA_BR_MCAST_LAST_MEMBER_INTVL, + IFLA_BR_MCAST_MEMBERSHIP_INTVL, + IFLA_BR_MCAST_QUERIER_INTVL, + IFLA_BR_MCAST_QUERY_INTVL, + IFLA_BR_MCAST_QUERY_RESPONSE_INTVL, + IFLA_BR_MCAST_STARTUP_QUERY_INTVL, + IFLA_BR_NF_CALL_IPTABLES, + IFLA_BR_NF_CALL_IP6TABLES, + IFLA_BR_NF_CALL_ARPTABLES, + IFLA_BR_VLAN_DEFAULT_PVID, + IFLA_BR_PAD, + IFLA_BR_VLAN_STATS_ENABLED, + IFLA_BR_MCAST_STATS_ENABLED, + IFLA_BR_MCAST_IGMP_VERSION, + IFLA_BR_MCAST_MLD_VERSION, + IFLA_BR_VLAN_STATS_PER_PORT, + IFLA_BR_MULTI_BOOLOPT, + IFLA_BR_MCAST_QUERIER_STATE, + IFLA_BR_FDB_N_LEARNED, + IFLA_BR_FDB_MAX_LEARNED, + __IFLA_BR_MAX, +}; + +#define IFLA_BR_MAX (__IFLA_BR_MAX - 1) + +struct ifla_bridge_id { + __u8 prio[2]; + __u8 addr[6]; /* ETH_ALEN */ +}; + +/** + * DOC: Bridge mode enum definition + * + * @BRIDGE_MODE_HAIRPIN + * Controls whether traffic may be sent back out of the port on which it + * was received. This option is also called reflective relay mode, and is + * used to support basic VEPA (Virtual Ethernet Port Aggregator) + * capabilities. By default, this flag is turned off and the bridge will + * not forward traffic back out of the receiving port. + */ +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +/** + * DOC: Bridge port enum definition + * + * @IFLA_BRPORT_STATE + * The operation state of the port. Here are the valid values. + * + * * 0 - port is in STP *DISABLED* state. Make this port completely + * inactive for STP. This is also called BPDU filter and could be used + * to disable STP on an untrusted port, like a leaf virtual device. + * The traffic forwarding is also stopped on this port. + * * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled + * on the bridge. In this state the port listens for STP BPDUs and + * drops all other traffic frames. + * * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on + * the bridge. In this state the port will accept traffic only for the + * purpose of updating MAC address tables. + * * 3 - port is in STP *FORWARDING* state. Port is fully active. + * * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on + * the bridge. This state is used during the STP election process. + * In this state, port will only process STP BPDUs. + * + * @IFLA_BRPORT_PRIORITY + * The STP port priority. The valid values are between 0 and 255. + * + * @IFLA_BRPORT_COST + * The STP path cost of the port. The valid values are between 1 and 65535. + * + * @IFLA_BRPORT_MODE + * Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details. + * + * @IFLA_BRPORT_GUARD + * Controls whether STP BPDUs will be processed by the bridge port. By + * default, the flag is turned off to allow BPDU processing. Turning this + * flag on will disable the bridge port if a STP BPDU packet is received. + * + * If the bridge has Spanning Tree enabled, hostile devices on the network + * may send BPDU on a port and cause network failure. Setting *guard on* + * will detect and stop this by disabling the port. The port will be + * restarted if the link is brought down, or removed and reattached. + * + * @IFLA_BRPORT_PROTECT + * Controls whether a given port is allowed to become a root port or not. + * Only used when STP is enabled on the bridge. By default the flag is off. + * + * This feature is also called root port guard. If BPDU is received from a + * leaf (edge) port, it should not be elected as root port. This could + * be used if using STP on a bridge and the downstream bridges are not fully + * trusted; this prevents a hostile guest from rerouting traffic. + * + * @IFLA_BRPORT_FAST_LEAVE + * This flag allows the bridge to immediately stop multicast traffic + * forwarding on a port that receives an IGMP Leave message. It is only used + * when IGMP snooping is enabled on the bridge. By default the flag is off. + * + * @IFLA_BRPORT_LEARNING + * Controls whether a given port will learn *source* MAC addresses from + * received traffic or not. Also controls whether dynamic FDB entries + * (which can also be added by software) will be refreshed by incoming + * traffic. By default this flag is on. + * + * @IFLA_BRPORT_UNICAST_FLOOD + * Controls whether unicast traffic for which there is no FDB entry will + * be flooded towards this port. By default this flag is on. + * + * @IFLA_BRPORT_PROXYARP + * Enable proxy ARP on this port. + * + * @IFLA_BRPORT_LEARNING_SYNC + * Controls whether a given port will sync MAC addresses learned on device + * port to bridge FDB. + * + * @IFLA_BRPORT_PROXYARP_WIFI + * Enable proxy ARP on this port which meets extended requirements by + * IEEE 802.11 and Hotspot 2.0 specifications. + * + * @IFLA_BRPORT_ROOT_ID + * + * @IFLA_BRPORT_BRIDGE_ID + * + * @IFLA_BRPORT_DESIGNATED_PORT + * + * @IFLA_BRPORT_DESIGNATED_COST + * + * @IFLA_BRPORT_ID + * + * @IFLA_BRPORT_NO + * + * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK + * + * @IFLA_BRPORT_CONFIG_PENDING + * + * @IFLA_BRPORT_MESSAGE_AGE_TIMER + * + * @IFLA_BRPORT_FORWARD_DELAY_TIMER + * + * @IFLA_BRPORT_HOLD_TIMER + * + * @IFLA_BRPORT_FLUSH + * Flush bridge ports' fdb dynamic entries. + * + * @IFLA_BRPORT_MULTICAST_ROUTER + * Configure the port's multicast router presence. A port with + * a multicast router will receive all multicast traffic. + * The valid values are: + * + * * 0 disable multicast routers on this port + * * 1 let the system detect the presence of routers (default) + * * 2 permanently enable multicast traffic forwarding on this port + * * 3 enable multicast routers temporarily on this port, not depending + * on incoming queries. + * + * @IFLA_BRPORT_PAD + * + * @IFLA_BRPORT_MCAST_FLOOD + * Controls whether a given port will flood multicast traffic for which + * there is no MDB entry. By default this flag is on. + * + * @IFLA_BRPORT_MCAST_TO_UCAST + * Controls whether a given port will replicate packets using unicast + * instead of multicast. By default this flag is off. + * + * This is done by copying the packet per host and changing the multicast + * destination MAC to a unicast one accordingly. + * + * *mcast_to_unicast* works on top of the multicast snooping feature of the + * bridge. Which means unicast copies are only delivered to hosts which + * are interested in unicast and signaled this via IGMP/MLD reports previously. + * + * This feature is intended for interface types which have a more reliable + * and/or efficient way to deliver unicast packets than broadcast ones + * (e.g. WiFi). + * + * However, it should only be enabled on interfaces where no IGMPv2/MLDv1 + * report suppression takes place. IGMP/MLD report suppression issue is + * usually overcome by the network daemon (supplicant) enabling AP isolation + * and by that separating all STAs. + * + * Delivery of STA-to-STA IP multicast is made possible again by enabling + * and utilizing the bridge hairpin mode, which considers the incoming port + * as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option). + * Hairpin mode is performed after multicast snooping, therefore leading + * to only deliver reports to STAs running a multicast router. + * + * @IFLA_BRPORT_VLAN_TUNNEL + * Controls whether vlan to tunnel mapping is enabled on the port. + * By default this flag is off. + * + * @IFLA_BRPORT_BCAST_FLOOD + * Controls flooding of broadcast traffic on the given port. By default + * this flag is on. + * + * @IFLA_BRPORT_GROUP_FWD_MASK + * Set the group forward mask. This is a bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults + * to 0, which means the bridge does not forward any link-local frames + * coming on this port). + * + * @IFLA_BRPORT_NEIGH_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression + * is enabled on the port. By default this flag is off. + * + * @IFLA_BRPORT_ISOLATED + * Controls whether a given port will be isolated, which means it will be + * able to communicate with non-isolated ports only. By default this + * flag is off. + * + * @IFLA_BRPORT_BACKUP_PORT + * Set a backup port. If the port loses carrier all traffic will be + * redirected to the configured backup port. Set the value to 0 to disable + * it. + * + * @IFLA_BRPORT_MRP_RING_OPEN + * + * @IFLA_BRPORT_MRP_IN_OPEN + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT + * The number of per-port EHT hosts limit. The default value is 512. + * Setting to 0 is not allowed. + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT + * The current number of tracked hosts, read only. + * + * @IFLA_BRPORT_LOCKED + * Controls whether a port will be locked, meaning that hosts behind the + * port will not be able to communicate through the port unless an FDB + * entry with the unit's MAC address is in the FDB. The common use case is + * that hosts are allowed access through authentication with the IEEE 802.1X + * protocol or based on whitelists. By default this flag is off. + * + * Please note that secure 802.1X deployments should always use the + * *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its + * FDB based on link-local (EAPOL) traffic received on the port. + * + * @IFLA_BRPORT_MAB + * Controls whether a port will use MAC Authentication Bypass (MAB), a + * technique through which select MAC addresses may be allowed on a locked + * port, without using 802.1X authentication. Packets with an unknown source + * MAC address generates a "locked" FDB entry on the incoming bridge port. + * The common use case is for user space to react to these bridge FDB + * notifications and optionally replace the locked FDB entry with a normal + * one, allowing traffic to pass for whitelisted MAC addresses. + * + * Setting this flag also requires *IFLA_BRPORT_LOCKED* and + * *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized + * data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic + * FDB entries installed by user space (as replacements for the locked FDB + * entries) to be refreshed and/or aged out. + * + * @IFLA_BRPORT_MCAST_N_GROUPS + * + * @IFLA_BRPORT_MCAST_MAX_GROUPS + * Sets the maximum number of MDB entries that can be registered for a + * given port. Attempts to register more MDB entries at the port than this + * limit allows will be rejected, whether they are done through netlink + * (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a + * limit of 0 disables the limit. The default value is 0. + * + * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression is + * enabled for a given port. By default this flag is off. + * + * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* + * is enabled for a given port. + * + * @IFLA_BRPORT_BACKUP_NHID + * The FDB nexthop object ID to attach to packets being redirected to a + * backup port that has VLAN tunnel mapping enabled (via the + * *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has + * the effect of not attaching any ID. + */ +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + IFLA_BRPORT_LEARNING, /* mac learning */ + IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ + IFLA_BRPORT_PROXYARP, /* proxy ARP */ + IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */ + IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */ + IFLA_BRPORT_ROOT_ID, /* designated root */ + IFLA_BRPORT_BRIDGE_ID, /* designated bridge */ + IFLA_BRPORT_DESIGNATED_PORT, + IFLA_BRPORT_DESIGNATED_COST, + IFLA_BRPORT_ID, + IFLA_BRPORT_NO, + IFLA_BRPORT_TOPOLOGY_CHANGE_ACK, + IFLA_BRPORT_CONFIG_PENDING, + IFLA_BRPORT_MESSAGE_AGE_TIMER, + IFLA_BRPORT_FORWARD_DELAY_TIMER, + IFLA_BRPORT_HOLD_TIMER, + IFLA_BRPORT_FLUSH, + IFLA_BRPORT_MULTICAST_ROUTER, + IFLA_BRPORT_PAD, + IFLA_BRPORT_MCAST_FLOOD, + IFLA_BRPORT_MCAST_TO_UCAST, + IFLA_BRPORT_VLAN_TUNNEL, + IFLA_BRPORT_BCAST_FLOOD, + IFLA_BRPORT_GROUP_FWD_MASK, + IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, + IFLA_BRPORT_BACKUP_PORT, + IFLA_BRPORT_MRP_RING_OPEN, + IFLA_BRPORT_MRP_IN_OPEN, + IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT, + IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, + IFLA_BRPORT_LOCKED, + IFLA_BRPORT_MAB, + IFLA_BRPORT_MCAST_N_GROUPS, + IFLA_BRPORT_MCAST_MAX_GROUPS, + IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, + IFLA_BRPORT_BACKUP_NHID, + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + +struct ifla_cacheinfo { + __u32 max_reasm_len; + __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ + __u32 reachable_time; + __u32 retrans_time; +}; + +enum { + IFLA_INFO_UNSPEC, + IFLA_INFO_KIND, + IFLA_INFO_DATA, + IFLA_INFO_XSTATS, + IFLA_INFO_SLAVE_KIND, + IFLA_INFO_SLAVE_DATA, + __IFLA_INFO_MAX, +}; + +#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) + +/* VLAN section */ + +enum { + IFLA_VLAN_UNSPEC, + IFLA_VLAN_ID, + IFLA_VLAN_FLAGS, + IFLA_VLAN_EGRESS_QOS, + IFLA_VLAN_INGRESS_QOS, + IFLA_VLAN_PROTOCOL, + __IFLA_VLAN_MAX, +}; + +#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) + +struct ifla_vlan_flags { + __u32 flags; + __u32 mask; +}; + +enum { + IFLA_VLAN_QOS_UNSPEC, + IFLA_VLAN_QOS_MAPPING, + __IFLA_VLAN_QOS_MAX +}; + +#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) + +struct ifla_vlan_qos_mapping { + __u32 from; + __u32 to; +}; + +/* MACVLAN section */ +enum { + IFLA_MACVLAN_UNSPEC, + IFLA_MACVLAN_MODE, + IFLA_MACVLAN_FLAGS, + IFLA_MACVLAN_MACADDR_MODE, + IFLA_MACVLAN_MACADDR, + IFLA_MACVLAN_MACADDR_DATA, + IFLA_MACVLAN_MACADDR_COUNT, + IFLA_MACVLAN_BC_QUEUE_LEN, + IFLA_MACVLAN_BC_QUEUE_LEN_USED, + IFLA_MACVLAN_BC_CUTOFF, + __IFLA_MACVLAN_MAX, +}; + +#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) + +enum macvlan_mode { + MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ + MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ + MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ + MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ + MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */ +}; + +enum macvlan_macaddr_mode { + MACVLAN_MACADDR_ADD, + MACVLAN_MACADDR_DEL, + MACVLAN_MACADDR_FLUSH, + MACVLAN_MACADDR_SET, +}; + +#define MACVLAN_FLAG_NOPROMISC 1 +#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */ + +/* VRF section */ +enum { + IFLA_VRF_UNSPEC, + IFLA_VRF_TABLE, + __IFLA_VRF_MAX +}; + +#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1) + +enum { + IFLA_VRF_PORT_UNSPEC, + IFLA_VRF_PORT_TABLE, + __IFLA_VRF_PORT_MAX +}; + +#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1) + +/* MACSEC section */ +enum { + IFLA_MACSEC_UNSPEC, + IFLA_MACSEC_SCI, + IFLA_MACSEC_PORT, + IFLA_MACSEC_ICV_LEN, + IFLA_MACSEC_CIPHER_SUITE, + IFLA_MACSEC_WINDOW, + IFLA_MACSEC_ENCODING_SA, + IFLA_MACSEC_ENCRYPT, + IFLA_MACSEC_PROTECT, + IFLA_MACSEC_INC_SCI, + IFLA_MACSEC_ES, + IFLA_MACSEC_SCB, + IFLA_MACSEC_REPLAY_PROTECT, + IFLA_MACSEC_VALIDATION, + IFLA_MACSEC_PAD, + IFLA_MACSEC_OFFLOAD, + __IFLA_MACSEC_MAX, +}; + +#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1) + +/* XFRM section */ +enum { + IFLA_XFRM_UNSPEC, + IFLA_XFRM_LINK, + IFLA_XFRM_IF_ID, + IFLA_XFRM_COLLECT_METADATA, + __IFLA_XFRM_MAX +}; + +#define IFLA_XFRM_MAX (__IFLA_XFRM_MAX - 1) + +enum macsec_validation_type { + MACSEC_VALIDATE_DISABLED = 0, + MACSEC_VALIDATE_CHECK = 1, + MACSEC_VALIDATE_STRICT = 2, + __MACSEC_VALIDATE_END, + MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1, +}; + +enum macsec_offload { + MACSEC_OFFLOAD_OFF = 0, + MACSEC_OFFLOAD_PHY = 1, + MACSEC_OFFLOAD_MAC = 2, + __MACSEC_OFFLOAD_END, + MACSEC_OFFLOAD_MAX = __MACSEC_OFFLOAD_END - 1, +}; + +/* IPVLAN section */ +enum { + IFLA_IPVLAN_UNSPEC, + IFLA_IPVLAN_MODE, + IFLA_IPVLAN_FLAGS, + __IFLA_IPVLAN_MAX +}; + +#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1) + +enum ipvlan_mode { + IPVLAN_MODE_L2 = 0, + IPVLAN_MODE_L3, + IPVLAN_MODE_L3S, + IPVLAN_MODE_MAX +}; + +#define IPVLAN_F_PRIVATE 0x01 +#define IPVLAN_F_VEPA 0x02 + +/* Tunnel RTM header */ +struct tunnel_msg { + __u8 family; + __u8 flags; + __u16 reserved2; + __u32 ifindex; +}; + +/* netkit section */ +enum netkit_action { + NETKIT_NEXT = -1, + NETKIT_PASS = 0, + NETKIT_DROP = 2, + NETKIT_REDIRECT = 7, +}; + +enum netkit_mode { + NETKIT_L2, + NETKIT_L3, +}; + +enum { + IFLA_NETKIT_UNSPEC, + IFLA_NETKIT_PEER_INFO, + IFLA_NETKIT_PRIMARY, + IFLA_NETKIT_POLICY, + IFLA_NETKIT_PEER_POLICY, + IFLA_NETKIT_MODE, + __IFLA_NETKIT_MAX, +}; +#define IFLA_NETKIT_MAX (__IFLA_NETKIT_MAX - 1) + +/* VXLAN section */ + +/* include statistics in the dump */ +#define TUNNEL_MSG_FLAG_STATS 0x01 + +#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS + +/* Embedded inside VXLAN_VNIFILTER_ENTRY_STATS */ +enum { + VNIFILTER_ENTRY_STATS_UNSPEC, + VNIFILTER_ENTRY_STATS_RX_BYTES, + VNIFILTER_ENTRY_STATS_RX_PKTS, + VNIFILTER_ENTRY_STATS_RX_DROPS, + VNIFILTER_ENTRY_STATS_RX_ERRORS, + VNIFILTER_ENTRY_STATS_TX_BYTES, + VNIFILTER_ENTRY_STATS_TX_PKTS, + VNIFILTER_ENTRY_STATS_TX_DROPS, + VNIFILTER_ENTRY_STATS_TX_ERRORS, + VNIFILTER_ENTRY_STATS_PAD, + __VNIFILTER_ENTRY_STATS_MAX +}; +#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1) + +enum { + VXLAN_VNIFILTER_ENTRY_UNSPEC, + VXLAN_VNIFILTER_ENTRY_START, + VXLAN_VNIFILTER_ENTRY_END, + VXLAN_VNIFILTER_ENTRY_GROUP, + VXLAN_VNIFILTER_ENTRY_GROUP6, + VXLAN_VNIFILTER_ENTRY_STATS, + __VXLAN_VNIFILTER_ENTRY_MAX +}; +#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1) + +enum { + VXLAN_VNIFILTER_UNSPEC, + VXLAN_VNIFILTER_ENTRY, + __VXLAN_VNIFILTER_MAX +}; +#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1) + +enum { + IFLA_VXLAN_UNSPEC, + IFLA_VXLAN_ID, + IFLA_VXLAN_GROUP, /* group or remote address */ + IFLA_VXLAN_LINK, + IFLA_VXLAN_LOCAL, + IFLA_VXLAN_TTL, + IFLA_VXLAN_TOS, + IFLA_VXLAN_LEARNING, + IFLA_VXLAN_AGEING, + IFLA_VXLAN_LIMIT, + IFLA_VXLAN_PORT_RANGE, /* source port */ + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, + IFLA_VXLAN_PORT, /* destination port */ + IFLA_VXLAN_GROUP6, + IFLA_VXLAN_LOCAL6, + IFLA_VXLAN_UDP_CSUM, + IFLA_VXLAN_UDP_ZERO_CSUM6_TX, + IFLA_VXLAN_UDP_ZERO_CSUM6_RX, + IFLA_VXLAN_REMCSUM_TX, + IFLA_VXLAN_REMCSUM_RX, + IFLA_VXLAN_GBP, + IFLA_VXLAN_REMCSUM_NOPARTIAL, + IFLA_VXLAN_COLLECT_METADATA, + IFLA_VXLAN_LABEL, + IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, + IFLA_VXLAN_DF, + IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + IFLA_VXLAN_LOCALBYPASS, + IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */ + __IFLA_VXLAN_MAX +}; +#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) + +struct ifla_vxlan_port_range { + __be16 low; + __be16 high; +}; + +enum ifla_vxlan_df { + VXLAN_DF_UNSET = 0, + VXLAN_DF_SET, + VXLAN_DF_INHERIT, + __VXLAN_DF_END, + VXLAN_DF_MAX = __VXLAN_DF_END - 1, +}; + +enum ifla_vxlan_label_policy { + VXLAN_LABEL_FIXED = 0, + VXLAN_LABEL_INHERIT = 1, + __VXLAN_LABEL_END, + VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1, +}; + +/* GENEVE section */ +enum { + IFLA_GENEVE_UNSPEC, + IFLA_GENEVE_ID, + IFLA_GENEVE_REMOTE, + IFLA_GENEVE_TTL, + IFLA_GENEVE_TOS, + IFLA_GENEVE_PORT, /* destination port */ + IFLA_GENEVE_COLLECT_METADATA, + IFLA_GENEVE_REMOTE6, + IFLA_GENEVE_UDP_CSUM, + IFLA_GENEVE_UDP_ZERO_CSUM6_TX, + IFLA_GENEVE_UDP_ZERO_CSUM6_RX, + IFLA_GENEVE_LABEL, + IFLA_GENEVE_TTL_INHERIT, + IFLA_GENEVE_DF, + IFLA_GENEVE_INNER_PROTO_INHERIT, + __IFLA_GENEVE_MAX +}; +#define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) + +enum ifla_geneve_df { + GENEVE_DF_UNSET = 0, + GENEVE_DF_SET, + GENEVE_DF_INHERIT, + __GENEVE_DF_END, + GENEVE_DF_MAX = __GENEVE_DF_END - 1, +}; + +/* Bareudp section */ +enum { + IFLA_BAREUDP_UNSPEC, + IFLA_BAREUDP_PORT, + IFLA_BAREUDP_ETHERTYPE, + IFLA_BAREUDP_SRCPORT_MIN, + IFLA_BAREUDP_MULTIPROTO_MODE, + __IFLA_BAREUDP_MAX +}; + +#define IFLA_BAREUDP_MAX (__IFLA_BAREUDP_MAX - 1) + +/* PPP section */ +enum { + IFLA_PPP_UNSPEC, + IFLA_PPP_DEV_FD, + __IFLA_PPP_MAX +}; +#define IFLA_PPP_MAX (__IFLA_PPP_MAX - 1) + +/* GTP section */ + +enum ifla_gtp_role { + GTP_ROLE_GGSN = 0, + GTP_ROLE_SGSN, +}; + +enum { + IFLA_GTP_UNSPEC, + IFLA_GTP_FD0, + IFLA_GTP_FD1, + IFLA_GTP_PDP_HASHSIZE, + IFLA_GTP_ROLE, + IFLA_GTP_CREATE_SOCKETS, + IFLA_GTP_RESTART_COUNT, + __IFLA_GTP_MAX, +}; +#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) + +/* Bonding section */ + +enum { + IFLA_BOND_UNSPEC, + IFLA_BOND_MODE, + IFLA_BOND_ACTIVE_SLAVE, + IFLA_BOND_MIIMON, + IFLA_BOND_UPDELAY, + IFLA_BOND_DOWNDELAY, + IFLA_BOND_USE_CARRIER, + IFLA_BOND_ARP_INTERVAL, + IFLA_BOND_ARP_IP_TARGET, + IFLA_BOND_ARP_VALIDATE, + IFLA_BOND_ARP_ALL_TARGETS, + IFLA_BOND_PRIMARY, + IFLA_BOND_PRIMARY_RESELECT, + IFLA_BOND_FAIL_OVER_MAC, + IFLA_BOND_XMIT_HASH_POLICY, + IFLA_BOND_RESEND_IGMP, + IFLA_BOND_NUM_PEER_NOTIF, + IFLA_BOND_ALL_SLAVES_ACTIVE, + IFLA_BOND_MIN_LINKS, + IFLA_BOND_LP_INTERVAL, + IFLA_BOND_PACKETS_PER_SLAVE, + IFLA_BOND_AD_LACP_RATE, + IFLA_BOND_AD_SELECT, + IFLA_BOND_AD_INFO, + IFLA_BOND_AD_ACTOR_SYS_PRIO, + IFLA_BOND_AD_USER_PORT_KEY, + IFLA_BOND_AD_ACTOR_SYSTEM, + IFLA_BOND_TLB_DYNAMIC_LB, + IFLA_BOND_PEER_NOTIF_DELAY, + IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, + IFLA_BOND_NS_IP6_TARGET, + __IFLA_BOND_MAX, +}; + +#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1) + +enum { + IFLA_BOND_AD_INFO_UNSPEC, + IFLA_BOND_AD_INFO_AGGREGATOR, + IFLA_BOND_AD_INFO_NUM_PORTS, + IFLA_BOND_AD_INFO_ACTOR_KEY, + IFLA_BOND_AD_INFO_PARTNER_KEY, + IFLA_BOND_AD_INFO_PARTNER_MAC, + __IFLA_BOND_AD_INFO_MAX, +}; + +#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1) + +enum { + IFLA_BOND_SLAVE_UNSPEC, + IFLA_BOND_SLAVE_STATE, + IFLA_BOND_SLAVE_MII_STATUS, + IFLA_BOND_SLAVE_LINK_FAILURE_COUNT, + IFLA_BOND_SLAVE_PERM_HWADDR, + IFLA_BOND_SLAVE_QUEUE_ID, + IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, + IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, + IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, + __IFLA_BOND_SLAVE_MAX, +}; + +#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1) + +/* SR-IOV virtual function management section */ + +enum { + IFLA_VF_INFO_UNSPEC, + IFLA_VF_INFO, + __IFLA_VF_INFO_MAX, +}; + +#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) + +enum { + IFLA_VF_UNSPEC, + IFLA_VF_MAC, /* Hardware queue specific attributes */ + IFLA_VF_VLAN, /* VLAN ID and QoS */ + IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ + IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ + IFLA_VF_RSS_QUERY_EN, /* RSS Redirection Table and Hash Key query + * on/off switch + */ + IFLA_VF_STATS, /* network device statistics */ + IFLA_VF_TRUST, /* Trust VF */ + IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */ + IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */ + IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */ + IFLA_VF_BROADCAST, /* VF broadcast */ + __IFLA_VF_MAX, +}; + +#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) + +struct ifla_vf_mac { + __u32 vf; + __u8 mac[32]; /* MAX_ADDR_LEN */ +}; + +struct ifla_vf_broadcast { + __u8 broadcast[32]; +}; + +struct ifla_vf_vlan { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; +}; + +enum { + IFLA_VF_VLAN_INFO_UNSPEC, + IFLA_VF_VLAN_INFO, /* VLAN ID, QoS and VLAN protocol */ + __IFLA_VF_VLAN_INFO_MAX, +}; + +#define IFLA_VF_VLAN_INFO_MAX (__IFLA_VF_VLAN_INFO_MAX - 1) +#define MAX_VLAN_LIST_LEN 1 + +struct ifla_vf_vlan_info { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; + __be16 vlan_proto; /* VLAN protocol either 802.1Q or 802.1ad */ +}; + +struct ifla_vf_tx_rate { + __u32 vf; + __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ +}; + +struct ifla_vf_rate { + __u32 vf; + __u32 min_tx_rate; /* Min Bandwidth in Mbps */ + __u32 max_tx_rate; /* Max Bandwidth in Mbps */ +}; + +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; + +struct ifla_vf_guid { + __u32 vf; + __u64 guid; +}; + +enum { + IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ + IFLA_VF_LINK_STATE_ENABLE, /* link always up */ + IFLA_VF_LINK_STATE_DISABLE, /* link always down */ + __IFLA_VF_LINK_STATE_MAX, +}; + +struct ifla_vf_link_state { + __u32 vf; + __u32 link_state; +}; + +struct ifla_vf_rss_query_en { + __u32 vf; + __u32 setting; +}; + +enum { + IFLA_VF_STATS_RX_PACKETS, + IFLA_VF_STATS_TX_PACKETS, + IFLA_VF_STATS_RX_BYTES, + IFLA_VF_STATS_TX_BYTES, + IFLA_VF_STATS_BROADCAST, + IFLA_VF_STATS_MULTICAST, + IFLA_VF_STATS_PAD, + IFLA_VF_STATS_RX_DROPPED, + IFLA_VF_STATS_TX_DROPPED, + __IFLA_VF_STATS_MAX, +}; + +#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1) + +struct ifla_vf_trust { + __u32 vf; + __u32 setting; +}; + +/* VF ports management section + * + * Nested layout of set/get msg is: + * + * [IFLA_NUM_VF] + * [IFLA_VF_PORTS] + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * ... + * [IFLA_PORT_SELF] + * [IFLA_PORT_*], ... + */ + +enum { + IFLA_VF_PORT_UNSPEC, + IFLA_VF_PORT, /* nest */ + __IFLA_VF_PORT_MAX, +}; + +#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) + +enum { + IFLA_PORT_UNSPEC, + IFLA_PORT_VF, /* __u32 */ + IFLA_PORT_PROFILE, /* string */ + IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ + IFLA_PORT_INSTANCE_UUID, /* binary UUID */ + IFLA_PORT_HOST_UUID, /* binary UUID */ + IFLA_PORT_REQUEST, /* __u8 */ + IFLA_PORT_RESPONSE, /* __u16, output only */ + __IFLA_PORT_MAX, +}; + +#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) + +#define PORT_PROFILE_MAX 40 +#define PORT_UUID_MAX 16 +#define PORT_SELF_VF -1 + +enum { + PORT_REQUEST_PREASSOCIATE = 0, + PORT_REQUEST_PREASSOCIATE_RR, + PORT_REQUEST_ASSOCIATE, + PORT_REQUEST_DISASSOCIATE, +}; + +enum { + PORT_VDP_RESPONSE_SUCCESS = 0, + PORT_VDP_RESPONSE_INVALID_FORMAT, + PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_VDP_RESPONSE_UNUSED_VTID, + PORT_VDP_RESPONSE_VTID_VIOLATION, + PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, + PORT_VDP_RESPONSE_OUT_OF_SYNC, + /* 0x08-0xFF reserved for future VDP use */ + PORT_PROFILE_RESPONSE_SUCCESS = 0x100, + PORT_PROFILE_RESPONSE_INPROGRESS, + PORT_PROFILE_RESPONSE_INVALID, + PORT_PROFILE_RESPONSE_BADSTATE, + PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_PROFILE_RESPONSE_ERROR, +}; + +struct ifla_port_vsi { + __u8 vsi_mgr_id; + __u8 vsi_type_id[3]; + __u8 vsi_type_version; + __u8 pad[3]; +}; + + +/* IPoIB section */ + +enum { + IFLA_IPOIB_UNSPEC, + IFLA_IPOIB_PKEY, + IFLA_IPOIB_MODE, + IFLA_IPOIB_UMCAST, + __IFLA_IPOIB_MAX +}; + +enum { + IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ + IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ +}; + +#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) + + +/* HSR/PRP section, both uses same interface */ + +/* Different redundancy protocols for hsr device */ +enum { + HSR_PROTOCOL_HSR, + HSR_PROTOCOL_PRP, + HSR_PROTOCOL_MAX, +}; + +enum { + IFLA_HSR_UNSPEC, + IFLA_HSR_SLAVE1, + IFLA_HSR_SLAVE2, + IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */ + IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ + IFLA_HSR_SEQ_NR, + IFLA_HSR_VERSION, /* HSR version */ + IFLA_HSR_PROTOCOL, /* Indicate different protocol than + * HSR. For example PRP. + */ + __IFLA_HSR_MAX, +}; + +#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1) + +/* STATS section */ + +struct if_stats_msg { + __u8 family; + __u8 pad1; + __u16 pad2; + __u32 ifindex; + __u32 filter_mask; +}; + +/* A stats attribute can be netdev specific or a global stat. + * For netdev stats, lets use the prefix IFLA_STATS_LINK_* + */ +enum { + IFLA_STATS_UNSPEC, /* also used as 64bit pad attribute */ + IFLA_STATS_LINK_64, + IFLA_STATS_LINK_XSTATS, + IFLA_STATS_LINK_XSTATS_SLAVE, + IFLA_STATS_LINK_OFFLOAD_XSTATS, + IFLA_STATS_AF_SPEC, + __IFLA_STATS_MAX, +}; + +#define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1) + +#define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1)) + +enum { + IFLA_STATS_GETSET_UNSPEC, + IFLA_STATS_GET_FILTERS, /* Nest of IFLA_STATS_LINK_xxx, each a u32 with + * a filter mask for the corresponding group. + */ + IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS, /* 0 or 1 as u8 */ + __IFLA_STATS_GETSET_MAX, +}; + +#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1) + +/* These are embedded into IFLA_STATS_LINK_XSTATS: + * [IFLA_STATS_LINK_XSTATS] + * -> [LINK_XSTATS_TYPE_xxx] + * -> [rtnl link type specific attributes] + */ +enum { + LINK_XSTATS_TYPE_UNSPEC, + LINK_XSTATS_TYPE_BRIDGE, + LINK_XSTATS_TYPE_BOND, + __LINK_XSTATS_TYPE_MAX +}; +#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1) + +/* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */ +enum { + IFLA_OFFLOAD_XSTATS_UNSPEC, + IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO, /* HW stats info. A nest */ + IFLA_OFFLOAD_XSTATS_L3_STATS, /* struct rtnl_hw_stats64 */ + __IFLA_OFFLOAD_XSTATS_MAX +}; +#define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) + +enum { + IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC, + IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, /* u8 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED, /* u8 */ + __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX, +}; +#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX \ + (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1) + +/* XDP section */ + +#define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0) +#define XDP_FLAGS_SKB_MODE (1U << 1) +#define XDP_FLAGS_DRV_MODE (1U << 2) +#define XDP_FLAGS_HW_MODE (1U << 3) +#define XDP_FLAGS_REPLACE (1U << 4) +#define XDP_FLAGS_MODES (XDP_FLAGS_SKB_MODE | \ + XDP_FLAGS_DRV_MODE | \ + XDP_FLAGS_HW_MODE) +#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \ + XDP_FLAGS_MODES | XDP_FLAGS_REPLACE) + +/* These are stored into IFLA_XDP_ATTACHED on dump. */ +enum { + XDP_ATTACHED_NONE = 0, + XDP_ATTACHED_DRV, + XDP_ATTACHED_SKB, + XDP_ATTACHED_HW, + XDP_ATTACHED_MULTI, +}; + +enum { + IFLA_XDP_UNSPEC, + IFLA_XDP_FD, + IFLA_XDP_ATTACHED, + IFLA_XDP_FLAGS, + IFLA_XDP_PROG_ID, + IFLA_XDP_DRV_PROG_ID, + IFLA_XDP_SKB_PROG_ID, + IFLA_XDP_HW_PROG_ID, + IFLA_XDP_EXPECTED_FD, + __IFLA_XDP_MAX, +}; + +#define IFLA_XDP_MAX (__IFLA_XDP_MAX - 1) + +enum { + IFLA_EVENT_NONE, + IFLA_EVENT_REBOOT, /* internal reset / reboot */ + IFLA_EVENT_FEATURES, /* change in offload features */ + IFLA_EVENT_BONDING_FAILOVER, /* change in active slave */ + IFLA_EVENT_NOTIFY_PEERS, /* re-sent grat. arp/ndisc */ + IFLA_EVENT_IGMP_RESEND, /* re-sent IGMP JOIN */ + IFLA_EVENT_BONDING_OPTIONS, /* change in bonding options */ +}; + +/* tun section */ + +enum { + IFLA_TUN_UNSPEC, + IFLA_TUN_OWNER, + IFLA_TUN_GROUP, + IFLA_TUN_TYPE, + IFLA_TUN_PI, + IFLA_TUN_VNET_HDR, + IFLA_TUN_PERSIST, + IFLA_TUN_MULTI_QUEUE, + IFLA_TUN_NUM_QUEUES, + IFLA_TUN_NUM_DISABLED_QUEUES, + __IFLA_TUN_MAX, +}; + +#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) + +/* rmnet section */ + +#define RMNET_FLAGS_INGRESS_DEAGGREGATION (1U << 0) +#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5) + +enum { + IFLA_RMNET_UNSPEC, + IFLA_RMNET_MUX_ID, + IFLA_RMNET_FLAGS, + __IFLA_RMNET_MAX, +}; + +#define IFLA_RMNET_MAX (__IFLA_RMNET_MAX - 1) + +struct ifla_rmnet_flags { + __u32 flags; + __u32 mask; +}; + +/* MCTP section */ + +enum { + IFLA_MCTP_UNSPEC, + IFLA_MCTP_NET, + __IFLA_MCTP_MAX, +}; + +#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1) + +/* DSA section */ + +enum { + IFLA_DSA_UNSPEC, + IFLA_DSA_CONDUIT, + /* Deprecated, use IFLA_DSA_CONDUIT instead */ + IFLA_DSA_MASTER = IFLA_DSA_CONDUIT, + __IFLA_DSA_MAX, +}; + +#define IFLA_DSA_MAX (__IFLA_DSA_MAX - 1) + +#endif /* _LINUX_IF_LINK_H */ diff --git a/include/uapi/linux/if_macsec.h b/include/uapi/linux/if_macsec.h new file mode 100644 index 0000000..6edfea0 --- /dev/null +++ b/include/uapi/linux/if_macsec.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * include/uapi/linux/if_macsec.h - MACsec device + * + * Copyright (c) 2015 Sabrina Dubroca <sd@queasysnail.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MACSEC_H +#define _MACSEC_H + +#include <linux/types.h> + +#define MACSEC_GENL_NAME "macsec" +#define MACSEC_GENL_VERSION 1 + +#define MACSEC_MAX_KEY_LEN 128 + +#define MACSEC_KEYID_LEN 16 + +#define MACSEC_SALT_LEN 12 + +/* cipher IDs as per IEEE802.1AE-2018 (Table 14-1) */ +#define MACSEC_CIPHER_ID_GCM_AES_128 0x0080C20001000001ULL +#define MACSEC_CIPHER_ID_GCM_AES_256 0x0080C20001000002ULL +#define MACSEC_CIPHER_ID_GCM_AES_XPN_128 0x0080C20001000003ULL +#define MACSEC_CIPHER_ID_GCM_AES_XPN_256 0x0080C20001000004ULL + +/* deprecated cipher ID for GCM-AES-128 */ +#define MACSEC_DEFAULT_CIPHER_ID 0x0080020001000001ULL +#define MACSEC_DEFAULT_CIPHER_ALT MACSEC_CIPHER_ID_GCM_AES_128 + +#define MACSEC_MIN_ICV_LEN 8 +#define MACSEC_MAX_ICV_LEN 32 +/* upper limit for ICV length as recommended by IEEE802.1AE-2006 */ +#define MACSEC_STD_ICV_LEN 16 + +enum macsec_attrs { + MACSEC_ATTR_UNSPEC, + MACSEC_ATTR_IFINDEX, /* u32, ifindex of the MACsec netdevice */ + MACSEC_ATTR_RXSC_CONFIG, /* config, nested macsec_rxsc_attrs */ + MACSEC_ATTR_SA_CONFIG, /* config, nested macsec_sa_attrs */ + MACSEC_ATTR_SECY, /* dump, nested macsec_secy_attrs */ + MACSEC_ATTR_TXSA_LIST, /* dump, nested, macsec_sa_attrs for each TXSA */ + MACSEC_ATTR_RXSC_LIST, /* dump, nested, macsec_rxsc_attrs for each RXSC */ + MACSEC_ATTR_TXSC_STATS, /* dump, nested, macsec_txsc_stats_attr */ + MACSEC_ATTR_SECY_STATS, /* dump, nested, macsec_secy_stats_attr */ + MACSEC_ATTR_OFFLOAD, /* config, nested, macsec_offload_attrs */ + __MACSEC_ATTR_END, + NUM_MACSEC_ATTR = __MACSEC_ATTR_END, + MACSEC_ATTR_MAX = __MACSEC_ATTR_END - 1, +}; + +enum macsec_secy_attrs { + MACSEC_SECY_ATTR_UNSPEC, + MACSEC_SECY_ATTR_SCI, + MACSEC_SECY_ATTR_ENCODING_SA, + MACSEC_SECY_ATTR_WINDOW, + MACSEC_SECY_ATTR_CIPHER_SUITE, + MACSEC_SECY_ATTR_ICV_LEN, + MACSEC_SECY_ATTR_PROTECT, + MACSEC_SECY_ATTR_REPLAY, + MACSEC_SECY_ATTR_OPER, + MACSEC_SECY_ATTR_VALIDATE, + MACSEC_SECY_ATTR_ENCRYPT, + MACSEC_SECY_ATTR_INC_SCI, + MACSEC_SECY_ATTR_ES, + MACSEC_SECY_ATTR_SCB, + MACSEC_SECY_ATTR_PAD, + __MACSEC_SECY_ATTR_END, + NUM_MACSEC_SECY_ATTR = __MACSEC_SECY_ATTR_END, + MACSEC_SECY_ATTR_MAX = __MACSEC_SECY_ATTR_END - 1, +}; + +enum macsec_rxsc_attrs { + MACSEC_RXSC_ATTR_UNSPEC, + MACSEC_RXSC_ATTR_SCI, /* config/dump, u64 */ + MACSEC_RXSC_ATTR_ACTIVE, /* config/dump, u8 0..1 */ + MACSEC_RXSC_ATTR_SA_LIST, /* dump, nested */ + MACSEC_RXSC_ATTR_STATS, /* dump, nested, macsec_rxsc_stats_attr */ + MACSEC_RXSC_ATTR_PAD, + __MACSEC_RXSC_ATTR_END, + NUM_MACSEC_RXSC_ATTR = __MACSEC_RXSC_ATTR_END, + MACSEC_RXSC_ATTR_MAX = __MACSEC_RXSC_ATTR_END - 1, +}; + +enum macsec_sa_attrs { + MACSEC_SA_ATTR_UNSPEC, + MACSEC_SA_ATTR_AN, /* config/dump, u8 0..3 */ + MACSEC_SA_ATTR_ACTIVE, /* config/dump, u8 0..1 */ + MACSEC_SA_ATTR_PN, /* config/dump, u32/u64 (u64 if XPN) */ + MACSEC_SA_ATTR_KEY, /* config, data */ + MACSEC_SA_ATTR_KEYID, /* config/dump, 128-bit */ + MACSEC_SA_ATTR_STATS, /* dump, nested, macsec_sa_stats_attr */ + MACSEC_SA_ATTR_PAD, + MACSEC_SA_ATTR_SSCI, /* config/dump, u32 - XPN only */ + MACSEC_SA_ATTR_SALT, /* config, 96-bit - XPN only */ + __MACSEC_SA_ATTR_END, + NUM_MACSEC_SA_ATTR = __MACSEC_SA_ATTR_END, + MACSEC_SA_ATTR_MAX = __MACSEC_SA_ATTR_END - 1, +}; + +enum macsec_offload_attrs { + MACSEC_OFFLOAD_ATTR_UNSPEC, + MACSEC_OFFLOAD_ATTR_TYPE, /* config/dump, u8 0..2 */ + MACSEC_OFFLOAD_ATTR_PAD, + __MACSEC_OFFLOAD_ATTR_END, + NUM_MACSEC_OFFLOAD_ATTR = __MACSEC_OFFLOAD_ATTR_END, + MACSEC_OFFLOAD_ATTR_MAX = __MACSEC_OFFLOAD_ATTR_END - 1, +}; + +enum macsec_nl_commands { + MACSEC_CMD_GET_TXSC, + MACSEC_CMD_ADD_RXSC, + MACSEC_CMD_DEL_RXSC, + MACSEC_CMD_UPD_RXSC, + MACSEC_CMD_ADD_TXSA, + MACSEC_CMD_DEL_TXSA, + MACSEC_CMD_UPD_TXSA, + MACSEC_CMD_ADD_RXSA, + MACSEC_CMD_DEL_RXSA, + MACSEC_CMD_UPD_RXSA, + MACSEC_CMD_UPD_OFFLOAD, +}; + +/* u64 per-RXSC stats */ +enum macsec_rxsc_stats_attr { + MACSEC_RXSC_STATS_ATTR_UNSPEC, + MACSEC_RXSC_STATS_ATTR_IN_OCTETS_VALIDATED, + MACSEC_RXSC_STATS_ATTR_IN_OCTETS_DECRYPTED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_UNCHECKED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_DELAYED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_OK, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_INVALID, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_LATE, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_NOT_VALID, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_NOT_USING_SA, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_UNUSED_SA, + MACSEC_RXSC_STATS_ATTR_PAD, + __MACSEC_RXSC_STATS_ATTR_END, + NUM_MACSEC_RXSC_STATS_ATTR = __MACSEC_RXSC_STATS_ATTR_END, + MACSEC_RXSC_STATS_ATTR_MAX = __MACSEC_RXSC_STATS_ATTR_END - 1, +}; + +/* u32 per-{RX,TX}SA stats */ +enum macsec_sa_stats_attr { + MACSEC_SA_STATS_ATTR_UNSPEC, + MACSEC_SA_STATS_ATTR_IN_PKTS_OK, + MACSEC_SA_STATS_ATTR_IN_PKTS_INVALID, + MACSEC_SA_STATS_ATTR_IN_PKTS_NOT_VALID, + MACSEC_SA_STATS_ATTR_IN_PKTS_NOT_USING_SA, + MACSEC_SA_STATS_ATTR_IN_PKTS_UNUSED_SA, + MACSEC_SA_STATS_ATTR_OUT_PKTS_PROTECTED, + MACSEC_SA_STATS_ATTR_OUT_PKTS_ENCRYPTED, + __MACSEC_SA_STATS_ATTR_END, + NUM_MACSEC_SA_STATS_ATTR = __MACSEC_SA_STATS_ATTR_END, + MACSEC_SA_STATS_ATTR_MAX = __MACSEC_SA_STATS_ATTR_END - 1, +}; + +/* u64 per-TXSC stats */ +enum macsec_txsc_stats_attr { + MACSEC_TXSC_STATS_ATTR_UNSPEC, + MACSEC_TXSC_STATS_ATTR_OUT_PKTS_PROTECTED, + MACSEC_TXSC_STATS_ATTR_OUT_PKTS_ENCRYPTED, + MACSEC_TXSC_STATS_ATTR_OUT_OCTETS_PROTECTED, + MACSEC_TXSC_STATS_ATTR_OUT_OCTETS_ENCRYPTED, + MACSEC_TXSC_STATS_ATTR_PAD, + __MACSEC_TXSC_STATS_ATTR_END, + NUM_MACSEC_TXSC_STATS_ATTR = __MACSEC_TXSC_STATS_ATTR_END, + MACSEC_TXSC_STATS_ATTR_MAX = __MACSEC_TXSC_STATS_ATTR_END - 1, +}; + +/* u64 per-SecY stats */ +enum macsec_secy_stats_attr { + MACSEC_SECY_STATS_ATTR_UNSPEC, + MACSEC_SECY_STATS_ATTR_OUT_PKTS_UNTAGGED, + MACSEC_SECY_STATS_ATTR_IN_PKTS_UNTAGGED, + MACSEC_SECY_STATS_ATTR_OUT_PKTS_TOO_LONG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_NO_TAG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_BAD_TAG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_UNKNOWN_SCI, + MACSEC_SECY_STATS_ATTR_IN_PKTS_NO_SCI, + MACSEC_SECY_STATS_ATTR_IN_PKTS_OVERRUN, + MACSEC_SECY_STATS_ATTR_PAD, + __MACSEC_SECY_STATS_ATTR_END, + NUM_MACSEC_SECY_STATS_ATTR = __MACSEC_SECY_STATS_ATTR_END, + MACSEC_SECY_STATS_ATTR_MAX = __MACSEC_SECY_STATS_ATTR_END - 1, +}; + +#endif /* _MACSEC_H */ diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h new file mode 100644 index 0000000..9efc423 --- /dev/null +++ b/include/uapi/linux/if_packet.h @@ -0,0 +1,319 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_IF_PACKET_H +#define __LINUX_IF_PACKET_H + +#include <asm/byteorder.h> +#include <linux/types.h> + +struct sockaddr_pkt { + unsigned short spkt_family; + unsigned char spkt_device[14]; + __be16 spkt_protocol; +}; + +struct sockaddr_ll { + unsigned short sll_family; + __be16 sll_protocol; + int sll_ifindex; + unsigned short sll_hatype; + unsigned char sll_pkttype; + unsigned char sll_halen; + unsigned char sll_addr[8]; +}; + +/* Packet types */ + +#define PACKET_HOST 0 /* To us */ +#define PACKET_BROADCAST 1 /* To all */ +#define PACKET_MULTICAST 2 /* To group */ +#define PACKET_OTHERHOST 3 /* To someone else */ +#define PACKET_OUTGOING 4 /* Outgoing of any type */ +#define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */ +#define PACKET_USER 6 /* To user space */ +#define PACKET_KERNEL 7 /* To kernel space */ +/* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */ +#define PACKET_FASTROUTE 6 /* Fastrouted frame */ + +/* Packet socket options */ + +#define PACKET_ADD_MEMBERSHIP 1 +#define PACKET_DROP_MEMBERSHIP 2 +#define PACKET_RECV_OUTPUT 3 +/* Value 4 is still used by obsolete turbo-packet. */ +#define PACKET_RX_RING 5 +#define PACKET_STATISTICS 6 +#define PACKET_COPY_THRESH 7 +#define PACKET_AUXDATA 8 +#define PACKET_ORIGDEV 9 +#define PACKET_VERSION 10 +#define PACKET_HDRLEN 11 +#define PACKET_RESERVE 12 +#define PACKET_TX_RING 13 +#define PACKET_LOSS 14 +#define PACKET_VNET_HDR 15 +#define PACKET_TX_TIMESTAMP 16 +#define PACKET_TIMESTAMP 17 +#define PACKET_FANOUT 18 +#define PACKET_TX_HAS_OFF 19 +#define PACKET_QDISC_BYPASS 20 +#define PACKET_ROLLOVER_STATS 21 +#define PACKET_FANOUT_DATA 22 +#define PACKET_IGNORE_OUTGOING 23 +#define PACKET_VNET_HDR_SZ 24 + +#define PACKET_FANOUT_HASH 0 +#define PACKET_FANOUT_LB 1 +#define PACKET_FANOUT_CPU 2 +#define PACKET_FANOUT_ROLLOVER 3 +#define PACKET_FANOUT_RND 4 +#define PACKET_FANOUT_QM 5 +#define PACKET_FANOUT_CBPF 6 +#define PACKET_FANOUT_EBPF 7 +#define PACKET_FANOUT_FLAG_ROLLOVER 0x1000 +#define PACKET_FANOUT_FLAG_UNIQUEID 0x2000 +#define PACKET_FANOUT_FLAG_IGNORE_OUTGOING 0x4000 +#define PACKET_FANOUT_FLAG_DEFRAG 0x8000 + +struct tpacket_stats { + unsigned int tp_packets; + unsigned int tp_drops; +}; + +struct tpacket_stats_v3 { + unsigned int tp_packets; + unsigned int tp_drops; + unsigned int tp_freeze_q_cnt; +}; + +struct tpacket_rollover_stats { + __aligned_u64 tp_all; + __aligned_u64 tp_huge; + __aligned_u64 tp_failed; +}; + +union tpacket_stats_u { + struct tpacket_stats stats1; + struct tpacket_stats_v3 stats3; +}; + +struct tpacket_auxdata { + __u32 tp_status; + __u32 tp_len; + __u32 tp_snaplen; + __u16 tp_mac; + __u16 tp_net; + __u16 tp_vlan_tci; + __u16 tp_vlan_tpid; +}; + +/* Rx ring - header status */ +#define TP_STATUS_KERNEL 0 +#define TP_STATUS_USER (1 << 0) +#define TP_STATUS_COPY (1 << 1) +#define TP_STATUS_LOSING (1 << 2) +#define TP_STATUS_CSUMNOTREADY (1 << 3) +#define TP_STATUS_VLAN_VALID (1 << 4) /* auxdata has valid tp_vlan_tci */ +#define TP_STATUS_BLK_TMO (1 << 5) +#define TP_STATUS_VLAN_TPID_VALID (1 << 6) /* auxdata has valid tp_vlan_tpid */ +#define TP_STATUS_CSUM_VALID (1 << 7) +#define TP_STATUS_GSO_TCP (1 << 8) + +/* Tx ring - header status */ +#define TP_STATUS_AVAILABLE 0 +#define TP_STATUS_SEND_REQUEST (1 << 0) +#define TP_STATUS_SENDING (1 << 1) +#define TP_STATUS_WRONG_FORMAT (1 << 2) + +/* Rx and Tx ring - header status */ +#define TP_STATUS_TS_SOFTWARE (1 << 29) +#define TP_STATUS_TS_SYS_HARDWARE (1 << 30) /* deprecated, never set */ +#define TP_STATUS_TS_RAW_HARDWARE (1U << 31) + +/* Rx ring - feature request bits */ +#define TP_FT_REQ_FILL_RXHASH 0x1 + +struct tpacket_hdr { + unsigned long tp_status; + unsigned int tp_len; + unsigned int tp_snaplen; + unsigned short tp_mac; + unsigned short tp_net; + unsigned int tp_sec; + unsigned int tp_usec; +}; + +#define TPACKET_ALIGNMENT 16 +#define TPACKET_ALIGN(x) (((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1)) +#define TPACKET_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll)) + +struct tpacket2_hdr { + __u32 tp_status; + __u32 tp_len; + __u32 tp_snaplen; + __u16 tp_mac; + __u16 tp_net; + __u32 tp_sec; + __u32 tp_nsec; + __u16 tp_vlan_tci; + __u16 tp_vlan_tpid; + __u8 tp_padding[4]; +}; + +struct tpacket_hdr_variant1 { + __u32 tp_rxhash; + __u32 tp_vlan_tci; + __u16 tp_vlan_tpid; + __u16 tp_padding; +}; + +struct tpacket3_hdr { + __u32 tp_next_offset; + __u32 tp_sec; + __u32 tp_nsec; + __u32 tp_snaplen; + __u32 tp_len; + __u32 tp_status; + __u16 tp_mac; + __u16 tp_net; + /* pkt_hdr variants */ + union { + struct tpacket_hdr_variant1 hv1; + }; + __u8 tp_padding[8]; +}; + +struct tpacket_bd_ts { + unsigned int ts_sec; + union { + unsigned int ts_usec; + unsigned int ts_nsec; + }; +}; + +struct tpacket_hdr_v1 { + __u32 block_status; + __u32 num_pkts; + __u32 offset_to_first_pkt; + + /* Number of valid bytes (including padding) + * blk_len <= tp_block_size + */ + __u32 blk_len; + + /* + * Quite a few uses of sequence number: + * 1. Make sure cache flush etc worked. + * Well, one can argue - why not use the increasing ts below? + * But look at 2. below first. + * 2. When you pass around blocks to other user space decoders, + * you can see which blk[s] is[are] outstanding etc. + * 3. Validate kernel code. + */ + __aligned_u64 seq_num; + + /* + * ts_last_pkt: + * + * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out) + * ts_last_pkt == 'time-stamp of last packet' and NOT the + * time when the timer fired and the block was closed. + * By providing the ts of the last packet we can absolutely + * guarantee that time-stamp wise, the first packet in the + * next block will never precede the last packet of the + * previous block. + * Case 2. Block has zero packets and TMO'd + * ts_last_pkt = time when the timer fired and the block + * was closed. + * Case 3. Block has 'N' packets and NO TMO. + * ts_last_pkt = time-stamp of the last pkt in the block. + * + * ts_first_pkt: + * Is always the time-stamp when the block was opened. + * Case a) ZERO packets + * No packets to deal with but atleast you know the + * time-interval of this block. + * Case b) Non-zero packets + * Use the ts of the first packet in the block. + * + */ + struct tpacket_bd_ts ts_first_pkt, ts_last_pkt; +}; + +union tpacket_bd_header_u { + struct tpacket_hdr_v1 bh1; +}; + +struct tpacket_block_desc { + __u32 version; + __u32 offset_to_priv; + union tpacket_bd_header_u hdr; +}; + +#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll)) +#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll)) + +enum tpacket_versions { + TPACKET_V1, + TPACKET_V2, + TPACKET_V3 +}; + +/* + Frame structure: + + - Start. Frame must be aligned to TPACKET_ALIGNMENT=16 + - struct tpacket_hdr + - pad to TPACKET_ALIGNMENT=16 + - struct sockaddr_ll + - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16 + - Start+tp_mac: [ Optional MAC header ] + - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16. + - Pad to align to TPACKET_ALIGNMENT=16 + */ + +struct tpacket_req { + unsigned int tp_block_size; /* Minimal size of contiguous block */ + unsigned int tp_block_nr; /* Number of blocks */ + unsigned int tp_frame_size; /* Size of frame */ + unsigned int tp_frame_nr; /* Total number of frames */ +}; + +struct tpacket_req3 { + unsigned int tp_block_size; /* Minimal size of contiguous block */ + unsigned int tp_block_nr; /* Number of blocks */ + unsigned int tp_frame_size; /* Size of frame */ + unsigned int tp_frame_nr; /* Total number of frames */ + unsigned int tp_retire_blk_tov; /* timeout in msecs */ + unsigned int tp_sizeof_priv; /* offset to private data area */ + unsigned int tp_feature_req_word; +}; + +union tpacket_req_u { + struct tpacket_req req; + struct tpacket_req3 req3; +}; + +struct packet_mreq { + int mr_ifindex; + unsigned short mr_type; + unsigned short mr_alen; + unsigned char mr_address[8]; +}; + +struct fanout_args { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 id; + __u16 type_flags; +#else + __u16 type_flags; + __u16 id; +#endif + __u32 max_num_members; +}; + +#define PACKET_MR_MULTICAST 0 +#define PACKET_MR_PROMISC 1 +#define PACKET_MR_ALLMULTI 2 +#define PACKET_MR_UNICAST 3 + +#endif diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h new file mode 100644 index 0000000..8a6d5d4 --- /dev/null +++ b/include/uapi/linux/if_tun.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Universal TUN/TAP device driver. + * Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __IF_TUN_H +#define __IF_TUN_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/filter.h> + +/* Read queue size */ +#define TUN_READQ_SIZE 500 +/* TUN device type flags: deprecated. Use IFF_TUN/IFF_TAP instead. */ +#define TUN_TUN_DEV IFF_TUN +#define TUN_TAP_DEV IFF_TAP +#define TUN_TYPE_MASK 0x000f + +/* Ioctl defines */ +#define TUNSETNOCSUM _IOW('T', 200, int) +#define TUNSETDEBUG _IOW('T', 201, int) +#define TUNSETIFF _IOW('T', 202, int) +#define TUNSETPERSIST _IOW('T', 203, int) +#define TUNSETOWNER _IOW('T', 204, int) +#define TUNSETLINK _IOW('T', 205, int) +#define TUNSETGROUP _IOW('T', 206, int) +#define TUNGETFEATURES _IOR('T', 207, unsigned int) +#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) +#define TUNSETTXFILTER _IOW('T', 209, unsigned int) +#define TUNGETIFF _IOR('T', 210, unsigned int) +#define TUNGETSNDBUF _IOR('T', 211, int) +#define TUNSETSNDBUF _IOW('T', 212, int) +#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) +#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) +#define TUNGETVNETHDRSZ _IOR('T', 215, int) +#define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) +#define TUNSETIFINDEX _IOW('T', 218, unsigned int) +#define TUNGETFILTER _IOR('T', 219, struct sock_fprog) +#define TUNSETVNETLE _IOW('T', 220, int) +#define TUNGETVNETLE _IOR('T', 221, int) +/* The TUNSETVNETBE and TUNGETVNETBE ioctls are for cross-endian support on + * little-endian hosts. Not all kernel configurations support them, but all + * configurations that support SET also support GET. + */ +#define TUNSETVNETBE _IOW('T', 222, int) +#define TUNGETVNETBE _IOR('T', 223, int) +#define TUNSETSTEERINGEBPF _IOR('T', 224, int) +#define TUNSETFILTEREBPF _IOR('T', 225, int) +#define TUNSETCARRIER _IOW('T', 226, int) +#define TUNGETDEVNETNS _IO('T', 227) + +/* TUNSETIFF ifr flags */ +#define IFF_TUN 0x0001 +#define IFF_TAP 0x0002 +#define IFF_NAPI 0x0010 +#define IFF_NAPI_FRAGS 0x0020 +/* Used in TUNSETIFF to bring up tun/tap without carrier */ +#define IFF_NO_CARRIER 0x0040 +#define IFF_NO_PI 0x1000 +/* This flag has no real effect */ +#define IFF_ONE_QUEUE 0x2000 +#define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 +/* read-only flag */ +#define IFF_PERSIST 0x0800 +#define IFF_NOFILTER 0x1000 + +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 + +/* Features for GSO (TUNSETOFFLOAD). */ +#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ +#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ +#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ +#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ +#define TUN_F_USO4 0x20 /* I can handle USO for IPv4 packets */ +#define TUN_F_USO6 0x40 /* I can handle USO for IPv6 packets */ + +/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ +#define TUN_PKT_STRIP 0x0001 +struct tun_pi { + __u16 flags; + __be16 proto; +}; + +/* + * Filter spec (used for SETXXFILTER ioctls) + * This stuff is applicable only to the TAP (Ethernet) devices. + * If the count is zero the filter is disabled and the driver accepts + * all packets (promisc mode). + * If the filter is enabled in order to accept broadcast packets + * broadcast addr must be explicitly included in the addr list. + */ +#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ +struct tun_filter { + __u16 flags; /* TUN_FLT_ flags see above */ + __u16 count; /* Number of addresses */ + __u8 addr[][ETH_ALEN]; +}; + +#endif /* __IF_TUN_H */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h new file mode 100644 index 0000000..edaea41 --- /dev/null +++ b/include/uapi/linux/if_tunnel.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _IF_TUNNEL_H_ +#define _IF_TUNNEL_H_ + +#include <linux/types.h> +#include <linux/if.h> +#include <linux/ip.h> +#include <linux/in6.h> +#include <asm/byteorder.h> + + +#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) +#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) +#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) +#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) +#define SIOCGETPRL (SIOCDEVPRIVATE + 4) +#define SIOCADDPRL (SIOCDEVPRIVATE + 5) +#define SIOCDELPRL (SIOCDEVPRIVATE + 6) +#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) +#define SIOCGET6RD (SIOCDEVPRIVATE + 8) +#define SIOCADD6RD (SIOCDEVPRIVATE + 9) +#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) +#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) + +#define GRE_CSUM __cpu_to_be16(0x8000) +#define GRE_ROUTING __cpu_to_be16(0x4000) +#define GRE_KEY __cpu_to_be16(0x2000) +#define GRE_SEQ __cpu_to_be16(0x1000) +#define GRE_STRICT __cpu_to_be16(0x0800) +#define GRE_REC __cpu_to_be16(0x0700) +#define GRE_ACK __cpu_to_be16(0x0080) +#define GRE_FLAGS __cpu_to_be16(0x0078) +#define GRE_VERSION __cpu_to_be16(0x0007) + +#define GRE_IS_CSUM(f) ((f) & GRE_CSUM) +#define GRE_IS_ROUTING(f) ((f) & GRE_ROUTING) +#define GRE_IS_KEY(f) ((f) & GRE_KEY) +#define GRE_IS_SEQ(f) ((f) & GRE_SEQ) +#define GRE_IS_STRICT(f) ((f) & GRE_STRICT) +#define GRE_IS_REC(f) ((f) & GRE_REC) +#define GRE_IS_ACK(f) ((f) & GRE_ACK) + +#define GRE_VERSION_0 __cpu_to_be16(0x0000) +#define GRE_VERSION_1 __cpu_to_be16(0x0001) +#define GRE_PROTO_PPP __cpu_to_be16(0x880b) +#define GRE_PPTP_KEY_MASK __cpu_to_be32(0xffff) + +struct ip_tunnel_parm { + char name[IFNAMSIZ]; + int link; + __be16 i_flags; + __be16 o_flags; + __be32 i_key; + __be32 o_key; + struct iphdr iph; +}; + +enum { + IFLA_IPTUN_UNSPEC, + IFLA_IPTUN_LINK, + IFLA_IPTUN_LOCAL, + IFLA_IPTUN_REMOTE, + IFLA_IPTUN_TTL, + IFLA_IPTUN_TOS, + IFLA_IPTUN_ENCAP_LIMIT, + IFLA_IPTUN_FLOWINFO, + IFLA_IPTUN_FLAGS, + IFLA_IPTUN_PROTO, + IFLA_IPTUN_PMTUDISC, + IFLA_IPTUN_6RD_PREFIX, + IFLA_IPTUN_6RD_RELAY_PREFIX, + IFLA_IPTUN_6RD_PREFIXLEN, + IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + IFLA_IPTUN_ENCAP_TYPE, + IFLA_IPTUN_ENCAP_FLAGS, + IFLA_IPTUN_ENCAP_SPORT, + IFLA_IPTUN_ENCAP_DPORT, + IFLA_IPTUN_COLLECT_METADATA, + IFLA_IPTUN_FWMARK, + __IFLA_IPTUN_MAX, +}; +#define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + +enum tunnel_encap_types { + TUNNEL_ENCAP_NONE, + TUNNEL_ENCAP_FOU, + TUNNEL_ENCAP_GUE, + TUNNEL_ENCAP_MPLS, +}; + +#define TUNNEL_ENCAP_FLAG_CSUM (1<<0) +#define TUNNEL_ENCAP_FLAG_CSUM6 (1<<1) +#define TUNNEL_ENCAP_FLAG_REMCSUM (1<<2) + +/* SIT-mode i_flags */ +#define SIT_ISATAP 0x0001 + +struct ip_tunnel_prl { + __be32 addr; + __u16 flags; + __u16 __reserved; + __u32 datalen; + __u32 __reserved2; + /* data follows */ +}; + +/* PRL flags */ +#define PRL_DEFAULT 0x0001 + +struct ip_tunnel_6rd { + struct in6_addr prefix; + __be32 relay_prefix; + __u16 prefixlen; + __u16 relay_prefixlen; +}; + +enum { + IFLA_GRE_UNSPEC, + IFLA_GRE_LINK, + IFLA_GRE_IFLAGS, + IFLA_GRE_OFLAGS, + IFLA_GRE_IKEY, + IFLA_GRE_OKEY, + IFLA_GRE_LOCAL, + IFLA_GRE_REMOTE, + IFLA_GRE_TTL, + IFLA_GRE_TOS, + IFLA_GRE_PMTUDISC, + IFLA_GRE_ENCAP_LIMIT, + IFLA_GRE_FLOWINFO, + IFLA_GRE_FLAGS, + IFLA_GRE_ENCAP_TYPE, + IFLA_GRE_ENCAP_FLAGS, + IFLA_GRE_ENCAP_SPORT, + IFLA_GRE_ENCAP_DPORT, + IFLA_GRE_COLLECT_METADATA, + IFLA_GRE_IGNORE_DF, + IFLA_GRE_FWMARK, + IFLA_GRE_ERSPAN_INDEX, + IFLA_GRE_ERSPAN_VER, + IFLA_GRE_ERSPAN_DIR, + IFLA_GRE_ERSPAN_HWID, + __IFLA_GRE_MAX, +}; + +#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) + +/* VTI-mode i_flags */ +#define VTI_ISVTI ((__be16)0x0001) + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + IFLA_VTI_FWMARK, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) + +#define TUNNEL_CSUM __cpu_to_be16(0x01) +#define TUNNEL_ROUTING __cpu_to_be16(0x02) +#define TUNNEL_KEY __cpu_to_be16(0x04) +#define TUNNEL_SEQ __cpu_to_be16(0x08) +#define TUNNEL_STRICT __cpu_to_be16(0x10) +#define TUNNEL_REC __cpu_to_be16(0x20) +#define TUNNEL_VERSION __cpu_to_be16(0x40) +#define TUNNEL_NO_KEY __cpu_to_be16(0x80) +#define TUNNEL_DONT_FRAGMENT __cpu_to_be16(0x0100) +#define TUNNEL_OAM __cpu_to_be16(0x0200) +#define TUNNEL_CRIT_OPT __cpu_to_be16(0x0400) +#define TUNNEL_GENEVE_OPT __cpu_to_be16(0x0800) +#define TUNNEL_VXLAN_OPT __cpu_to_be16(0x1000) +#define TUNNEL_NOCACHE __cpu_to_be16(0x2000) +#define TUNNEL_ERSPAN_OPT __cpu_to_be16(0x4000) +#define TUNNEL_GTP_OPT __cpu_to_be16(0x8000) + +#define TUNNEL_OPTIONS_PRESENT \ + (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \ + TUNNEL_GTP_OPT) + +#endif /* _IF_TUNNEL_H_ */ diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h new file mode 100644 index 0000000..04bca79 --- /dev/null +++ b/include/uapi/linux/if_vlan.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * VLAN An implementation of 802.1Q VLAN tagging. + * + * Authors: Ben Greear <greearb@candelatech.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#ifndef _LINUX_IF_VLAN_H_ +#define _LINUX_IF_VLAN_H_ + + +/* VLAN IOCTLs are found in sockios.h */ + +/* Passed in vlan_ioctl_args structure to determine behaviour. */ +enum vlan_ioctl_cmds { + ADD_VLAN_CMD, + DEL_VLAN_CMD, + SET_VLAN_INGRESS_PRIORITY_CMD, + SET_VLAN_EGRESS_PRIORITY_CMD, + GET_VLAN_INGRESS_PRIORITY_CMD, + GET_VLAN_EGRESS_PRIORITY_CMD, + SET_VLAN_NAME_TYPE_CMD, + SET_VLAN_FLAG_CMD, + GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ + GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ +}; + +enum vlan_flags { + VLAN_FLAG_REORDER_HDR = 0x1, + VLAN_FLAG_GVRP = 0x2, + VLAN_FLAG_LOOSE_BINDING = 0x4, + VLAN_FLAG_MVRP = 0x8, + VLAN_FLAG_BRIDGE_BINDING = 0x10, +}; + +enum vlan_name_types { + VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ + VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ + VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ + VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ + VLAN_NAME_TYPE_HIGHEST +}; + +struct vlan_ioctl_args { + int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ + char device1[24]; + + union { + char device2[24]; + int VID; + unsigned int skb_priority; + unsigned int name_type; + unsigned int bind_type; + unsigned int flag; /* Matches vlan_dev_priv flags */ + } u; + + short vlan_qos; +}; + +#endif /* _LINUX_IF_VLAN_H_ */ diff --git a/include/uapi/linux/ife.h b/include/uapi/linux/ife.h new file mode 100644 index 0000000..bdd953c --- /dev/null +++ b/include/uapi/linux/ife.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UAPI_IFE_H +#define __UAPI_IFE_H + +#define IFE_METAHDRLEN 2 + +enum { + IFE_META_SKBMARK = 1, + IFE_META_HASHID, + IFE_META_PRIO, + IFE_META_QMAP, + IFE_META_TCINDEX, + __IFE_META_MAX +}; + +/*Can be overridden at runtime by module option*/ +#define IFE_META_MAX (__IFE_META_MAX - 1) + +#endif diff --git a/include/uapi/linux/ila.h b/include/uapi/linux/ila.h new file mode 100644 index 0000000..6a6c97c --- /dev/null +++ b/include/uapi/linux/ila.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* ila.h - ILA Interface */ + +#ifndef _LINUX_ILA_H +#define _LINUX_ILA_H + +/* NETLINK_GENERIC related info */ +#define ILA_GENL_NAME "ila" +#define ILA_GENL_VERSION 0x1 + +enum { + ILA_ATTR_UNSPEC, + ILA_ATTR_LOCATOR, /* u64 */ + ILA_ATTR_IDENTIFIER, /* u64 */ + ILA_ATTR_LOCATOR_MATCH, /* u64 */ + ILA_ATTR_IFINDEX, /* s32 */ + ILA_ATTR_DIR, /* u32 */ + ILA_ATTR_PAD, + ILA_ATTR_CSUM_MODE, /* u8 */ + ILA_ATTR_IDENT_TYPE, /* u8 */ + ILA_ATTR_HOOK_TYPE, /* u8 */ + + __ILA_ATTR_MAX, +}; + +#define ILA_ATTR_MAX (__ILA_ATTR_MAX - 1) + +enum { + ILA_CMD_UNSPEC, + ILA_CMD_ADD, + ILA_CMD_DEL, + ILA_CMD_GET, + ILA_CMD_FLUSH, + + __ILA_CMD_MAX, +}; + +#define ILA_CMD_MAX (__ILA_CMD_MAX - 1) + +#define ILA_DIR_IN (1 << 0) +#define ILA_DIR_OUT (1 << 1) + +enum { + ILA_CSUM_ADJUST_TRANSPORT, + ILA_CSUM_NEUTRAL_MAP, + ILA_CSUM_NO_ACTION, + ILA_CSUM_NEUTRAL_MAP_AUTO, +}; + +enum { + ILA_ATYPE_IID = 0, + ILA_ATYPE_LUID, + ILA_ATYPE_VIRT_V4, + ILA_ATYPE_VIRT_UNI_V6, + ILA_ATYPE_VIRT_MULTI_V6, + ILA_ATYPE_NONLOCAL_ADDR, + ILA_ATYPE_RSVD_1, + ILA_ATYPE_RSVD_2, + + ILA_ATYPE_USE_FORMAT = 32, /* Get type from type field in identifier */ +}; + +enum { + ILA_HOOK_ROUTE_OUTPUT, + ILA_HOOK_ROUTE_INPUT, +}; + +#endif /* _LINUX_ILA_H */ diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h new file mode 100644 index 0000000..7bdd684 --- /dev/null +++ b/include/uapi/linux/in.h @@ -0,0 +1,333 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions of the Internet Protocol. + * + * Version: @(#)in.h 1.0.1 04/21/93 + * + * Authors: Original taken from the GNU Project <netinet/in.h> file. + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IN_H +#define _LINUX_IN_H + +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/libc-compat.h> +#include <linux/socket.h> + +#if __UAPI_DEF_IN_IPPROTO +/* Standard well-defined IP protocols. */ +enum { + IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP + IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP + IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP + IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP + IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP + IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP + IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP + IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP + IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP + IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP + IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_L2TP = 115, /* Layer 2 Tunnelling Protocol */ +#define IPPROTO_L2TP IPPROTO_L2TP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP + IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_MPLS = 137, /* MPLS in IP (RFC 4023) */ +#define IPPROTO_MPLS IPPROTO_MPLS + IPPROTO_ETHERNET = 143, /* Ethernet-within-IPv6 Encapsulation */ +#define IPPROTO_ETHERNET IPPROTO_ETHERNET + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW + IPPROTO_MPTCP = 262, /* Multipath TCP connection */ +#define IPPROTO_MPTCP IPPROTO_MPTCP + IPPROTO_MAX +}; +#endif + +#if __UAPI_DEF_IN_ADDR +/* Internet address. */ +struct in_addr { + __be32 s_addr; +}; +#endif + +#define IP_TOS 1 +#define IP_TTL 2 +#define IP_HDRINCL 3 +#define IP_OPTIONS 4 +#define IP_ROUTER_ALERT 5 +#define IP_RECVOPTS 6 +#define IP_RETOPTS 7 +#define IP_PKTINFO 8 +#define IP_PKTOPTIONS 9 +#define IP_MTU_DISCOVER 10 +#define IP_RECVERR 11 +#define IP_RECVTTL 12 +#define IP_RECVTOS 13 +#define IP_MTU 14 +#define IP_FREEBIND 15 +#define IP_IPSEC_POLICY 16 +#define IP_XFRM_POLICY 17 +#define IP_PASSSEC 18 +#define IP_TRANSPARENT 19 + +/* BSD compatibility */ +#define IP_RECVRETOPTS IP_RETOPTS + +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + +#define IP_MINTTL 21 +#define IP_NODEFRAG 22 +#define IP_CHECKSUM 23 +#define IP_BIND_ADDRESS_NO_PORT 24 +#define IP_RECVFRAGSIZE 25 +#define IP_RECVERR_RFC4884 26 + +/* IP_MTU_DISCOVER values */ +#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ +#define IP_PMTUDISC_WANT 1 /* Use per route hints */ +#define IP_PMTUDISC_DO 2 /* Always DF */ +#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ +/* Always use interface mtu (ignores dst pmtu) but don't set DF flag. + * Also incoming ICMP frag_needed notifications will be ignored on + * this socket to prevent accepting spoofed ones. + */ +#define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allows packets to get + * fragmented if they exeed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 + +#define IP_MULTICAST_IF 32 +#define IP_MULTICAST_TTL 33 +#define IP_MULTICAST_LOOP 34 +#define IP_ADD_MEMBERSHIP 35 +#define IP_DROP_MEMBERSHIP 36 +#define IP_UNBLOCK_SOURCE 37 +#define IP_BLOCK_SOURCE 38 +#define IP_ADD_SOURCE_MEMBERSHIP 39 +#define IP_DROP_SOURCE_MEMBERSHIP 40 +#define IP_MSFILTER 41 +#define MCAST_JOIN_GROUP 42 +#define MCAST_BLOCK_SOURCE 43 +#define MCAST_UNBLOCK_SOURCE 44 +#define MCAST_LEAVE_GROUP 45 +#define MCAST_JOIN_SOURCE_GROUP 46 +#define MCAST_LEAVE_SOURCE_GROUP 47 +#define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 +#define IP_UNICAST_IF 50 +#define IP_LOCAL_PORT_RANGE 51 +#define IP_PROTOCOL 52 + +#define MCAST_EXCLUDE 0 +#define MCAST_INCLUDE 1 + +/* These need to appear somewhere around here */ +#define IP_DEFAULT_MULTICAST_TTL 1 +#define IP_DEFAULT_MULTICAST_LOOP 1 + +/* Request struct for multicast socket ops */ + +#if __UAPI_DEF_IP_MREQ +struct ip_mreq { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_interface; /* local IP address of interface */ +}; + +struct ip_mreqn { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_address; /* local IP address of interface */ + int imr_ifindex; /* Interface index */ +}; + +struct ip_mreq_source { + __be32 imr_multiaddr; + __be32 imr_interface; + __be32 imr_sourceaddr; +}; + +struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; + union { + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); + }; +}; + +#define IP_MSFILTER_SIZE(numsrc) \ + (sizeof(struct ip_msfilter) - sizeof(__u32) \ + + (numsrc) * sizeof(__u32)) + +struct group_req { + __u32 gr_interface; /* interface index */ + struct __kernel_sockaddr_storage gr_group; /* group address */ +}; + +struct group_source_req { + __u32 gsr_interface; /* interface index */ + struct __kernel_sockaddr_storage gsr_group; /* group address */ + struct __kernel_sockaddr_storage gsr_source; /* source address */ +}; + +struct group_filter { + union { + struct { + __u32 gf_interface_aux; /* interface index */ + struct __kernel_sockaddr_storage gf_group_aux; /* multicast address */ + __u32 gf_fmode_aux; /* filter mode */ + __u32 gf_numsrc_aux; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ + }; + struct { + __u32 gf_interface; /* interface index */ + struct __kernel_sockaddr_storage gf_group; /* multicast address */ + __u32 gf_fmode; /* filter mode */ + __u32 gf_numsrc; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */ + }; + }; +}; + +#define GROUP_FILTER_SIZE(numsrc) \ + (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ + + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) +#endif + +#if __UAPI_DEF_IN_PKTINFO +struct in_pktinfo { + int ipi_ifindex; + struct in_addr ipi_spec_dst; + struct in_addr ipi_addr; +}; +#endif + +/* Structure describing an Internet (IP) socket address. */ +#if __UAPI_DEF_SOCKADDR_IN +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_in { + __kernel_sa_family_t sin_family; /* Address family */ + __be16 sin_port; /* Port number */ + struct in_addr sin_addr; /* Internet address */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - + sizeof(unsigned short int) - sizeof(struct in_addr)]; +}; +#define sin_zero __pad /* for BSD UNIX comp. -FvK */ +#endif + +#if __UAPI_DEF_IN_CLASS +/* + * Definitions of the bits in an Internet address integer. + * On subnets, host and network parts are found according + * to the subnet mask, not these masks. + */ +#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) +#define IN_CLASSA_NET 0xff000000 +#define IN_CLASSA_NSHIFT 24 +#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) +#define IN_CLASSA_MAX 128 + +#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) +#define IN_CLASSB_NET 0xffff0000 +#define IN_CLASSB_NSHIFT 16 +#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) +#define IN_CLASSB_MAX 65536 + +#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) +#define IN_CLASSC_NET 0xffffff00 +#define IN_CLASSC_NSHIFT 8 +#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) + +#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) +#define IN_MULTICAST(a) IN_CLASSD(a) +#define IN_MULTICAST_NET 0xe0000000 + +#define IN_BADCLASS(a) (((long int) (a) ) == (long int)0xffffffff) +#define IN_EXPERIMENTAL(a) IN_BADCLASS((a)) + +#define IN_CLASSE(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) +#define IN_CLASSE_NET 0xffffffff +#define IN_CLASSE_NSHIFT 0 + +/* Address to accept any incoming messages. */ +#define INADDR_ANY ((unsigned long int) 0x00000000) + +/* Address to send to all hosts. */ +#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) + +/* Address indicating an error return. */ +#define INADDR_NONE ((unsigned long int) 0xffffffff) + +/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */ +#define INADDR_DUMMY ((unsigned long int) 0xc0000008) + +/* Network number for local host loopback. */ +#define IN_LOOPBACKNET 127 + +/* Address to loopback in software to local host. */ +#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ +#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) + +/* Defines for Multicast INADDR */ +#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ +#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ +#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ +#define INADDR_ALLSNOOPERS_GROUP 0xe000006aU /* 224.0.0.106 */ +#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ +#endif + +/* <asm/byteorder.h> contains the htonl type stuff.. */ +#include <asm/byteorder.h> + + +#endif /* _LINUX_IN_H */ diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h new file mode 100644 index 0000000..776fb41 --- /dev/null +++ b/include/uapi/linux/in6.h @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Types and definitions for AF_INET6 + * Linux INET6 implementation + * + * Authors: + * Pedro Roque <roque@di.fc.ul.pt> + * + * Sources: + * IPv6 Program Interfaces for BSD Systems + * <draft-ietf-ipngwg-bsd-api-05.txt> + * + * Advanced Sockets API for IPv6 + * <draft-stevens-advanced-api-00.txt> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_IN6_H +#define _LINUX_IN6_H + +#include <linux/types.h> +#include <linux/libc-compat.h> + +/* + * IPv6 address structure + */ + +#if __UAPI_DEF_IN6_ADDR +struct in6_addr { + union { + __u8 u6_addr8[16]; +#if __UAPI_DEF_IN6_ADDR_ALT + __be16 u6_addr16[8]; + __be32 u6_addr32[4]; +#endif + } in6_u; +#define s6_addr in6_u.u6_addr8 +#if __UAPI_DEF_IN6_ADDR_ALT +#define s6_addr16 in6_u.u6_addr16 +#define s6_addr32 in6_u.u6_addr32 +#endif +}; +#endif /* __UAPI_DEF_IN6_ADDR */ + +#if __UAPI_DEF_SOCKADDR_IN6 +struct sockaddr_in6 { + unsigned short int sin6_family; /* AF_INET6 */ + __be16 sin6_port; /* Transport layer port # */ + __be32 sin6_flowinfo; /* IPv6 flow information */ + struct in6_addr sin6_addr; /* IPv6 address */ + __u32 sin6_scope_id; /* scope id (new in RFC2553) */ +}; +#endif /* __UAPI_DEF_SOCKADDR_IN6 */ + +#if __UAPI_DEF_IPV6_MREQ +struct ipv6_mreq { + /* IPv6 multicast address of group */ + struct in6_addr ipv6mr_multiaddr; + + /* local IPv6 address of interface */ + int ipv6mr_ifindex; +}; +#endif /* __UAPI_DEF_IVP6_MREQ */ + +#define ipv6mr_acaddr ipv6mr_multiaddr + +struct in6_flowlabel_req { + struct in6_addr flr_dst; + __be32 flr_label; + __u8 flr_action; + __u8 flr_share; + __u16 flr_flags; + __u16 flr_expires; + __u16 flr_linger; + __u32 __flr_pad; + /* Options in format of IPV6_PKTOPTIONS */ +}; + +#define IPV6_FL_A_GET 0 +#define IPV6_FL_A_PUT 1 +#define IPV6_FL_A_RENEW 2 + +#define IPV6_FL_F_CREATE 1 +#define IPV6_FL_F_EXCL 2 +#define IPV6_FL_F_REFLECT 4 +#define IPV6_FL_F_REMOTE 8 + +#define IPV6_FL_S_NONE 0 +#define IPV6_FL_S_EXCL 1 +#define IPV6_FL_S_PROCESS 2 +#define IPV6_FL_S_USER 3 +#define IPV6_FL_S_ANY 255 + + +/* + * Bitmask constant declarations to help applications select out the + * flow label and priority fields. + * + * Note that this are in host byte order while the flowinfo field of + * sockaddr_in6 is in network byte order. + */ + +#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff +#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 + +/* These definitions are obsolete */ +#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 +#define IPV6_PRIORITY_FILLER 0x0100 +#define IPV6_PRIORITY_UNATTENDED 0x0200 +#define IPV6_PRIORITY_RESERVED1 0x0300 +#define IPV6_PRIORITY_BULK 0x0400 +#define IPV6_PRIORITY_RESERVED2 0x0500 +#define IPV6_PRIORITY_INTERACTIVE 0x0600 +#define IPV6_PRIORITY_CONTROL 0x0700 +#define IPV6_PRIORITY_8 0x0800 +#define IPV6_PRIORITY_9 0x0900 +#define IPV6_PRIORITY_10 0x0a00 +#define IPV6_PRIORITY_11 0x0b00 +#define IPV6_PRIORITY_12 0x0c00 +#define IPV6_PRIORITY_13 0x0d00 +#define IPV6_PRIORITY_14 0x0e00 +#define IPV6_PRIORITY_15 0x0f00 + +/* + * IPV6 extension headers + */ +#if __UAPI_DEF_IPPROTO_V6 +#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ +#define IPPROTO_ROUTING 43 /* IPv6 routing header */ +#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ +#define IPPROTO_ICMPV6 58 /* ICMPv6 */ +#define IPPROTO_NONE 59 /* IPv6 no next header */ +#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ +#define IPPROTO_MH 135 /* IPv6 mobility header */ +#endif /* __UAPI_DEF_IPPROTO_V6 */ + +/* + * IPv6 TLV options. + */ +#define IPV6_TLV_PAD1 0 +#define IPV6_TLV_PADN 1 +#define IPV6_TLV_ROUTERALERT 5 +#define IPV6_TLV_CALIPSO 7 /* RFC 5570 */ +#define IPV6_TLV_IOAM 49 /* RFC 9486 */ +#define IPV6_TLV_JUMBO 194 +#define IPV6_TLV_HAO 201 /* home address option */ + +/* + * IPV6 socket options + */ +#if __UAPI_DEF_IPV6_OPTIONS +#define IPV6_ADDRFORM 1 +#define IPV6_2292PKTINFO 2 +#define IPV6_2292HOPOPTS 3 +#define IPV6_2292DSTOPTS 4 +#define IPV6_2292RTHDR 5 +#define IPV6_2292PKTOPTIONS 6 +#define IPV6_CHECKSUM 7 +#define IPV6_2292HOPLIMIT 8 +#define IPV6_NEXTHOP 9 +#define IPV6_AUTHHDR 10 /* obsolete */ +#define IPV6_FLOWINFO 11 + +#define IPV6_UNICAST_HOPS 16 +#define IPV6_MULTICAST_IF 17 +#define IPV6_MULTICAST_HOPS 18 +#define IPV6_MULTICAST_LOOP 19 +#define IPV6_ADD_MEMBERSHIP 20 +#define IPV6_DROP_MEMBERSHIP 21 +#define IPV6_ROUTER_ALERT 22 +#define IPV6_MTU_DISCOVER 23 +#define IPV6_MTU 24 +#define IPV6_RECVERR 25 +#define IPV6_V6ONLY 26 +#define IPV6_JOIN_ANYCAST 27 +#define IPV6_LEAVE_ANYCAST 28 +#define IPV6_MULTICAST_ALL 29 +#define IPV6_ROUTER_ALERT_ISOLATE 30 +#define IPV6_RECVERR_RFC4884 31 + +/* IPV6_MTU_DISCOVER values */ +#define IPV6_PMTUDISC_DONT 0 +#define IPV6_PMTUDISC_WANT 1 +#define IPV6_PMTUDISC_DO 2 +#define IPV6_PMTUDISC_PROBE 3 +/* same as IPV6_PMTUDISC_PROBE, provided for symetry with IPv4 + * also see comments on IP_PMTUDISC_INTERFACE + */ +#define IPV6_PMTUDISC_INTERFACE 4 +/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to + * get fragmented if they exceed the interface mtu + */ +#define IPV6_PMTUDISC_OMIT 5 + +/* Flowlabel */ +#define IPV6_FLOWLABEL_MGR 32 +#define IPV6_FLOWINFO_SEND 33 + +#define IPV6_IPSEC_POLICY 34 +#define IPV6_XFRM_POLICY 35 +#define IPV6_HDRINCL 36 +#endif + +/* + * Multicast: + * Following socket options are shared between IPv4 and IPv6. + * + * MCAST_JOIN_GROUP 42 + * MCAST_BLOCK_SOURCE 43 + * MCAST_UNBLOCK_SOURCE 44 + * MCAST_LEAVE_GROUP 45 + * MCAST_JOIN_SOURCE_GROUP 46 + * MCAST_LEAVE_SOURCE_GROUP 47 + * MCAST_MSFILTER 48 + */ + +/* + * Advanced API (RFC3542) (1) + * + * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. + */ + +#define IPV6_RECVPKTINFO 49 +#define IPV6_PKTINFO 50 +#define IPV6_RECVHOPLIMIT 51 +#define IPV6_HOPLIMIT 52 +#define IPV6_RECVHOPOPTS 53 +#define IPV6_HOPOPTS 54 +#define IPV6_RTHDRDSTOPTS 55 +#define IPV6_RECVRTHDR 56 +#define IPV6_RTHDR 57 +#define IPV6_RECVDSTOPTS 58 +#define IPV6_DSTOPTS 59 +#define IPV6_RECVPATHMTU 60 +#define IPV6_PATHMTU 61 +#define IPV6_DONTFRAG 62 +#if 0 /* not yet */ +#define IPV6_USE_MIN_MTU 63 +#endif + +/* + * Netfilter (1) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 + * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 + */ + +/* + * Advanced API (RFC3542) (2) + */ +#define IPV6_RECVTCLASS 66 +#define IPV6_TCLASS 67 + +/* + * Netfilter (2) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_GET_REVISION_MATCH 68 + * IP6T_SO_GET_REVISION_TARGET 69 + * IP6T_SO_ORIGINAL_DST 80 + */ + +#define IPV6_AUTOFLOWLABEL 70 +/* RFC5014: Source address selection */ +#define IPV6_ADDR_PREFERENCES 72 + +#define IPV6_PREFER_SRC_TMP 0x0001 +#define IPV6_PREFER_SRC_PUBLIC 0x0002 +#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 +#define IPV6_PREFER_SRC_COA 0x0004 +#define IPV6_PREFER_SRC_HOME 0x0400 +#define IPV6_PREFER_SRC_CGA 0x0008 +#define IPV6_PREFER_SRC_NONCGA 0x0800 + +/* RFC5082: Generalized Ttl Security Mechanism */ +#define IPV6_MINHOPCOUNT 73 + +#define IPV6_ORIGDSTADDR 74 +#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR +#define IPV6_TRANSPARENT 75 +#define IPV6_UNICAST_IF 76 +#define IPV6_RECVFRAGSIZE 77 +#define IPV6_FREEBIND 78 + +/* + * Multicast Routing: + * see include/uapi/linux/mroute6.h. + * + * MRT6_BASE 200 + * ... + * MRT6_MAX + */ +#endif /* _LINUX_IN6_H */ diff --git a/include/uapi/linux/in_route.h b/include/uapi/linux/in_route.h new file mode 100644 index 0000000..0cc2c23 --- /dev/null +++ b/include/uapi/linux/in_route.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_IN_ROUTE_H +#define _LINUX_IN_ROUTE_H + +/* IPv4 routing cache flags */ + +#define RTCF_DEAD RTNH_F_DEAD +#define RTCF_ONLINK RTNH_F_ONLINK + +/* Obsolete flag. About to be deleted */ +#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC + +#define RTCF_NOTIFY 0x00010000 +#define RTCF_DIRECTDST 0x00020000 /* unused */ +#define RTCF_REDIRECTED 0x00040000 +#define RTCF_TPROXY 0x00080000 /* unused */ + +#define RTCF_FAST 0x00200000 /* unused */ +#define RTCF_MASQ 0x00400000 /* unused */ +#define RTCF_SNAT 0x00800000 /* unused */ +#define RTCF_DOREDIRECT 0x01000000 +#define RTCF_DIRECTSRC 0x04000000 +#define RTCF_DNAT 0x08000000 +#define RTCF_BROADCAST 0x10000000 +#define RTCF_MULTICAST 0x20000000 +#define RTCF_REJECT 0x40000000 /* unused */ +#define RTCF_LOCAL 0x80000000 + +#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT) + +#define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK) + +#endif /* _LINUX_IN_ROUTE_H */ diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h new file mode 100644 index 0000000..d81cb69 --- /dev/null +++ b/include/uapi/linux/inet_diag.h @@ -0,0 +1,239 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _INET_DIAG_H_ +#define _INET_DIAG_H_ + +#include <linux/types.h> + +/* Just some random number */ +#define TCPDIAG_GETSOCK 18 +#define DCCPDIAG_GETSOCK 19 + +#define INET_DIAG_GETSOCK_MAX 24 + +/* Socket identity */ +struct inet_diag_sockid { + __be16 idiag_sport; + __be16 idiag_dport; + __be32 idiag_src[4]; + __be32 idiag_dst[4]; + __u32 idiag_if; + __u32 idiag_cookie[2]; +#define INET_DIAG_NOCOOKIE (~0U) +}; + +/* Request structure */ + +struct inet_diag_req { + __u8 idiag_family; /* Family of addresses. */ + __u8 idiag_src_len; + __u8 idiag_dst_len; + __u8 idiag_ext; /* Query extended information */ + + struct inet_diag_sockid id; + + __u32 idiag_states; /* States to dump */ + __u32 idiag_dbs; /* Tables to dump (NI) */ +}; + +struct inet_diag_req_v2 { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u8 idiag_ext; + __u8 pad; + __u32 idiag_states; + struct inet_diag_sockid id; +}; + +/* + * SOCK_RAW sockets require the underlied protocol to be + * additionally specified so we can use @pad member for + * this, but we can't rename it because userspace programs + * still may depend on this name. Instead lets use another + * structure definition as an alias for struct + * @inet_diag_req_v2. + */ +struct inet_diag_req_raw { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u8 idiag_ext; + __u8 sdiag_raw_protocol; + __u32 idiag_states; + struct inet_diag_sockid id; +}; + +enum { + INET_DIAG_REQ_NONE, + INET_DIAG_REQ_BYTECODE, + INET_DIAG_REQ_SK_BPF_STORAGES, + INET_DIAG_REQ_PROTOCOL, + __INET_DIAG_REQ_MAX, +}; + +#define INET_DIAG_REQ_MAX (__INET_DIAG_REQ_MAX - 1) + +/* Bytecode is sequence of 4 byte commands followed by variable arguments. + * All the commands identified by "code" are conditional jumps forward: + * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be + * length of the command and its arguments. + */ + +struct inet_diag_bc_op { + unsigned char code; + unsigned char yes; + unsigned short no; +}; + +enum { + INET_DIAG_BC_NOP, + INET_DIAG_BC_JMP, + INET_DIAG_BC_S_GE, + INET_DIAG_BC_S_LE, + INET_DIAG_BC_D_GE, + INET_DIAG_BC_D_LE, + INET_DIAG_BC_AUTO, + INET_DIAG_BC_S_COND, + INET_DIAG_BC_D_COND, + INET_DIAG_BC_DEV_COND, /* u32 ifindex */ + INET_DIAG_BC_MARK_COND, + INET_DIAG_BC_S_EQ, + INET_DIAG_BC_D_EQ, + INET_DIAG_BC_CGROUP_COND, /* u64 cgroup v2 ID */ +}; + +struct inet_diag_hostcond { + __u8 family; + __u8 prefix_len; + int port; + __be32 addr[]; +}; + +struct inet_diag_markcond { + __u32 mark; + __u32 mask; +}; + +/* Base info structure. It contains socket identity (addrs/ports/cookie) + * and, alas, the information shown by netstat. */ +struct inet_diag_msg { + __u8 idiag_family; + __u8 idiag_state; + __u8 idiag_timer; + __u8 idiag_retrans; + + struct inet_diag_sockid id; + + __u32 idiag_expires; + __u32 idiag_rqueue; + __u32 idiag_wqueue; + __u32 idiag_uid; + __u32 idiag_inode; +}; + +/* Extensions */ + +enum { + INET_DIAG_NONE, + INET_DIAG_MEMINFO, + INET_DIAG_INFO, + INET_DIAG_VEGASINFO, + INET_DIAG_CONG, + INET_DIAG_TOS, + INET_DIAG_TCLASS, + INET_DIAG_SKMEMINFO, + INET_DIAG_SHUTDOWN, + + /* + * Next extenstions cannot be requested in struct inet_diag_req_v2: + * its field idiag_ext has only 8 bits. + */ + + INET_DIAG_DCTCPINFO, /* request as INET_DIAG_VEGASINFO */ + INET_DIAG_PROTOCOL, /* response attribute only */ + INET_DIAG_SKV6ONLY, + INET_DIAG_LOCALS, + INET_DIAG_PEERS, + INET_DIAG_PAD, + INET_DIAG_MARK, /* only with CAP_NET_ADMIN */ + INET_DIAG_BBRINFO, /* request as INET_DIAG_VEGASINFO */ + INET_DIAG_CLASS_ID, /* request as INET_DIAG_TCLASS */ + INET_DIAG_MD5SIG, + INET_DIAG_ULP_INFO, + INET_DIAG_SK_BPF_STORAGES, + INET_DIAG_CGROUP_ID, + INET_DIAG_SOCKOPT, + __INET_DIAG_MAX, +}; + +#define INET_DIAG_MAX (__INET_DIAG_MAX - 1) + +enum { + INET_ULP_INFO_UNSPEC, + INET_ULP_INFO_NAME, + INET_ULP_INFO_TLS, + INET_ULP_INFO_MPTCP, + __INET_ULP_INFO_MAX, +}; +#define INET_ULP_INFO_MAX (__INET_ULP_INFO_MAX - 1) + +/* INET_DIAG_MEM */ + +struct inet_diag_meminfo { + __u32 idiag_rmem; + __u32 idiag_wmem; + __u32 idiag_fmem; + __u32 idiag_tmem; +}; + +/* INET_DIAG_SOCKOPT */ + +struct inet_diag_sockopt { + __u8 recverr:1, + is_icsk:1, + freebind:1, + hdrincl:1, + mc_loop:1, + transparent:1, + mc_all:1, + nodefrag:1; + __u8 bind_address_no_port:1, + recverr_rfc4884:1, + defer_connect:1, + unused:5; +}; + +/* INET_DIAG_VEGASINFO */ + +struct tcpvegas_info { + __u32 tcpv_enabled; + __u32 tcpv_rttcnt; + __u32 tcpv_rtt; + __u32 tcpv_minrtt; +}; + +/* INET_DIAG_DCTCPINFO */ + +struct tcp_dctcp_info { + __u16 dctcp_enabled; + __u16 dctcp_ce_state; + __u32 dctcp_alpha; + __u32 dctcp_ab_ecn; + __u32 dctcp_ab_tot; +}; + +/* INET_DIAG_BBRINFO */ + +struct tcp_bbr_info { + /* u64 bw: max-filtered BW (app throughput) estimate in Byte per sec: */ + __u32 bbr_bw_lo; /* lower 32 bits of bw */ + __u32 bbr_bw_hi; /* upper 32 bits of bw */ + __u32 bbr_min_rtt; /* min-filtered RTT in uSec */ + __u32 bbr_pacing_gain; /* pacing gain shifted left 8 bits */ + __u32 bbr_cwnd_gain; /* cwnd gain shifted left 8 bits */ +}; + +union tcp_cc_info { + struct tcpvegas_info vegas; + struct tcp_dctcp_info dctcp; + struct tcp_bbr_info bbr; +}; +#endif /* _INET_DIAG_H_ */ diff --git a/include/uapi/linux/ioam6.h b/include/uapi/linux/ioam6.h new file mode 100644 index 0000000..e646011 --- /dev/null +++ b/include/uapi/linux/ioam6.h @@ -0,0 +1,133 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM implementation + * + * Author: + * Justin Iurman <justin.iurman@uliege.be> + */ + +#ifndef _LINUX_IOAM6_H +#define _LINUX_IOAM6_H + +#include <asm/byteorder.h> +#include <linux/types.h> + +#define IOAM6_U16_UNAVAILABLE U16_MAX +#define IOAM6_U32_UNAVAILABLE U32_MAX +#define IOAM6_U64_UNAVAILABLE U64_MAX + +#define IOAM6_DEFAULT_ID (IOAM6_U32_UNAVAILABLE >> 8) +#define IOAM6_DEFAULT_ID_WIDE (IOAM6_U64_UNAVAILABLE >> 8) +#define IOAM6_DEFAULT_IF_ID IOAM6_U16_UNAVAILABLE +#define IOAM6_DEFAULT_IF_ID_WIDE IOAM6_U32_UNAVAILABLE + +/* + * IPv6 IOAM Option Header + */ +struct ioam6_hdr { + __u8 opt_type; + __u8 opt_len; + __u8 :8; /* reserved */ +#define IOAM6_TYPE_PREALLOC 0 + __u8 type; +} __attribute__((packed)); + +/* + * IOAM Trace Header + */ +struct ioam6_trace_hdr { + __be16 namespace_id; + +#if defined(__LITTLE_ENDIAN_BITFIELD) + + __u8 :1, /* unused */ + :1, /* unused */ + overflow:1, + nodelen:5; + + __u8 remlen:7, + :1; /* unused */ + + union { + __be32 type_be32; + + struct { + __u32 bit7:1, + bit6:1, + bit5:1, + bit4:1, + bit3:1, + bit2:1, + bit1:1, + bit0:1, + bit15:1, /* unused */ + bit14:1, /* unused */ + bit13:1, /* unused */ + bit12:1, /* unused */ + bit11:1, + bit10:1, + bit9:1, + bit8:1, + bit23:1, /* reserved */ + bit22:1, + bit21:1, /* unused */ + bit20:1, /* unused */ + bit19:1, /* unused */ + bit18:1, /* unused */ + bit17:1, /* unused */ + bit16:1, /* unused */ + :8; /* reserved */ + } type; + }; + +#elif defined(__BIG_ENDIAN_BITFIELD) + + __u8 nodelen:5, + overflow:1, + :1, /* unused */ + :1; /* unused */ + + __u8 :1, /* unused */ + remlen:7; + + union { + __be32 type_be32; + + struct { + __u32 bit0:1, + bit1:1, + bit2:1, + bit3:1, + bit4:1, + bit5:1, + bit6:1, + bit7:1, + bit8:1, + bit9:1, + bit10:1, + bit11:1, + bit12:1, /* unused */ + bit13:1, /* unused */ + bit14:1, /* unused */ + bit15:1, /* unused */ + bit16:1, /* unused */ + bit17:1, /* unused */ + bit18:1, /* unused */ + bit19:1, /* unused */ + bit20:1, /* unused */ + bit21:1, /* unused */ + bit22:1, + bit23:1, /* reserved */ + :8; /* reserved */ + } type; + }; + +#else +#error "Please fix <asm/byteorder.h>" +#endif + +#define IOAM6_TRACE_DATA_SIZE_MAX 244 + __u8 data[]; +} __attribute__((packed)); + +#endif /* _LINUX_IOAM6_H */ diff --git a/include/uapi/linux/ioam6_genl.h b/include/uapi/linux/ioam6_genl.h new file mode 100644 index 0000000..6043d9f --- /dev/null +++ b/include/uapi/linux/ioam6_genl.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM Generic Netlink API + * + * Author: + * Justin Iurman <justin.iurman@uliege.be> + */ + +#ifndef _LINUX_IOAM6_GENL_H +#define _LINUX_IOAM6_GENL_H + +#define IOAM6_GENL_NAME "IOAM6" +#define IOAM6_GENL_VERSION 0x1 + +enum { + IOAM6_ATTR_UNSPEC, + + IOAM6_ATTR_NS_ID, /* u16 */ + IOAM6_ATTR_NS_DATA, /* u32 */ + IOAM6_ATTR_NS_DATA_WIDE,/* u64 */ + +#define IOAM6_MAX_SCHEMA_DATA_LEN (255 * 4) + IOAM6_ATTR_SC_ID, /* u32 */ + IOAM6_ATTR_SC_DATA, /* Binary */ + IOAM6_ATTR_SC_NONE, /* Flag */ + + IOAM6_ATTR_PAD, + + __IOAM6_ATTR_MAX, +}; + +#define IOAM6_ATTR_MAX (__IOAM6_ATTR_MAX - 1) + +enum { + IOAM6_CMD_UNSPEC, + + IOAM6_CMD_ADD_NAMESPACE, + IOAM6_CMD_DEL_NAMESPACE, + IOAM6_CMD_DUMP_NAMESPACES, + + IOAM6_CMD_ADD_SCHEMA, + IOAM6_CMD_DEL_SCHEMA, + IOAM6_CMD_DUMP_SCHEMAS, + + IOAM6_CMD_NS_SET_SCHEMA, + + __IOAM6_CMD_MAX, +}; + +#define IOAM6_CMD_MAX (__IOAM6_CMD_MAX - 1) + +#endif /* _LINUX_IOAM6_GENL_H */ diff --git a/include/uapi/linux/ioam6_iptunnel.h b/include/uapi/linux/ioam6_iptunnel.h new file mode 100644 index 0000000..750357b --- /dev/null +++ b/include/uapi/linux/ioam6_iptunnel.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM Lightweight Tunnel API + * + * Author: + * Justin Iurman <justin.iurman@uliege.be> + */ + +#ifndef _LINUX_IOAM6_IPTUNNEL_H +#define _LINUX_IOAM6_IPTUNNEL_H + +/* Encap modes: + * - inline: direct insertion + * - encap: ip6ip6 encapsulation + * - auto: __inline__ for local packets, encap for in-transit packets + */ +enum { + __IOAM6_IPTUNNEL_MODE_MIN, + + IOAM6_IPTUNNEL_MODE_INLINE, + IOAM6_IPTUNNEL_MODE_ENCAP, + IOAM6_IPTUNNEL_MODE_AUTO, + + __IOAM6_IPTUNNEL_MODE_MAX, +}; + +#define IOAM6_IPTUNNEL_MODE_MIN (__IOAM6_IPTUNNEL_MODE_MIN + 1) +#define IOAM6_IPTUNNEL_MODE_MAX (__IOAM6_IPTUNNEL_MODE_MAX - 1) + +enum { + IOAM6_IPTUNNEL_UNSPEC, + + /* Encap mode */ + IOAM6_IPTUNNEL_MODE, /* u8 */ + + /* Tunnel dst address. + * For encap,auto modes. + */ + IOAM6_IPTUNNEL_DST, /* struct in6_addr */ + + /* IOAM Trace Header */ + IOAM6_IPTUNNEL_TRACE, /* struct ioam6_trace_hdr */ + + /* Insertion frequency: + * "k over n" packets (0 < k <= n) + * [0.0001% ... 100%] + */ +#define IOAM6_IPTUNNEL_FREQ_MIN 1 +#define IOAM6_IPTUNNEL_FREQ_MAX 1000000 + IOAM6_IPTUNNEL_FREQ_K, /* u32 */ + IOAM6_IPTUNNEL_FREQ_N, /* u32 */ + + __IOAM6_IPTUNNEL_MAX, +}; + +#define IOAM6_IPTUNNEL_MAX (__IOAM6_IPTUNNEL_MAX - 1) + +#endif /* _LINUX_IOAM6_IPTUNNEL_H */ diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h new file mode 100644 index 0000000..9b4dd89 --- /dev/null +++ b/include/uapi/linux/ip.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the IP protocol. + * + * Version: @(#)ip.h 1.0.2 04/28/93 + * + * Authors: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IP_H +#define _LINUX_IP_H +#include <linux/types.h> +#include <linux/stddef.h> +#include <asm/byteorder.h> + +#define IPTOS_TOS_MASK 0x1E +#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK) +#define IPTOS_LOWDELAY 0x10 +#define IPTOS_THROUGHPUT 0x08 +#define IPTOS_RELIABILITY 0x04 +#define IPTOS_MINCOST 0x02 + +#define IPTOS_PREC_MASK 0xE0 +#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK) +#define IPTOS_PREC_NETCONTROL 0xe0 +#define IPTOS_PREC_INTERNETCONTROL 0xc0 +#define IPTOS_PREC_CRITIC_ECP 0xa0 +#define IPTOS_PREC_FLASHOVERRIDE 0x80 +#define IPTOS_PREC_FLASH 0x60 +#define IPTOS_PREC_IMMEDIATE 0x40 +#define IPTOS_PREC_PRIORITY 0x20 +#define IPTOS_PREC_ROUTINE 0x00 + + +/* IP options */ +#define IPOPT_COPY 0x80 +#define IPOPT_CLASS_MASK 0x60 +#define IPOPT_NUMBER_MASK 0x1f + +#define IPOPT_COPIED(o) ((o)&IPOPT_COPY) +#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK) +#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK) + +#define IPOPT_CONTROL 0x00 +#define IPOPT_RESERVED1 0x20 +#define IPOPT_MEASUREMENT 0x40 +#define IPOPT_RESERVED2 0x60 + +#define IPOPT_END (0 |IPOPT_CONTROL) +#define IPOPT_NOOP (1 |IPOPT_CONTROL) +#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT) +#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_RR (7 |IPOPT_CONTROL) +#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY) + +#define IPVERSION 4 +#define MAXTTL 255 +#define IPDEFTTL 64 + +#define IPOPT_OPTVAL 0 +#define IPOPT_OLEN 1 +#define IPOPT_OFFSET 2 +#define IPOPT_MINOFF 4 +#define MAX_IPOPTLEN 40 +#define IPOPT_NOP IPOPT_NOOP +#define IPOPT_EOL IPOPT_END +#define IPOPT_TS IPOPT_TIMESTAMP + +#define IPOPT_TS_TSONLY 0 /* timestamps only */ +#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ +#define IPOPT_TS_PRESPEC 3 /* specified modules only */ + +#define IPV4_BEET_PHMAXLEN 8 + +struct iphdr { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 ihl:4, + version:4; +#elif defined (__BIG_ENDIAN_BITFIELD) + __u8 version:4, + ihl:4; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 tos; + __be16 tot_len; + __be16 id; + __be16 frag_off; + __u8 ttl; + __u8 protocol; + __sum16 check; + __struct_group(/* no tag */, addrs, /* no attrs */, + __be32 saddr; + __be32 daddr; + ); + /*The options start here. */ +}; + + +struct ip_auth_hdr { + __u8 nexthdr; + __u8 hdrlen; /* This one is measured in 32 bit units! */ + __be16 reserved; + __be32 spi; + __be32 seq_no; /* Sequence number */ + __u8 auth_data[]; /* Variable len but >=4. Mind the 64 bit alignment! */ +}; + +struct ip_esp_hdr { + __be32 spi; + __be32 seq_no; /* Sequence number */ + __u8 enc_data[]; /* Variable len but >=8. Mind the 64 bit alignment! */ +}; + +struct ip_comp_hdr { + __u8 nexthdr; + __u8 flags; + __be16 cpi; +}; + +struct ip_beet_phdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 padlen; + __u8 reserved; +}; + +/* index values for the variables in ipv4_devconf */ +enum +{ + IPV4_DEVCONF_FORWARDING=1, + IPV4_DEVCONF_MC_FORWARDING, + IPV4_DEVCONF_PROXY_ARP, + IPV4_DEVCONF_ACCEPT_REDIRECTS, + IPV4_DEVCONF_SECURE_REDIRECTS, + IPV4_DEVCONF_SEND_REDIRECTS, + IPV4_DEVCONF_SHARED_MEDIA, + IPV4_DEVCONF_RP_FILTER, + IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE, + IPV4_DEVCONF_BOOTP_RELAY, + IPV4_DEVCONF_LOG_MARTIANS, + IPV4_DEVCONF_TAG, + IPV4_DEVCONF_ARPFILTER, + IPV4_DEVCONF_MEDIUM_ID, + IPV4_DEVCONF_NOXFRM, + IPV4_DEVCONF_NOPOLICY, + IPV4_DEVCONF_FORCE_IGMP_VERSION, + IPV4_DEVCONF_ARP_ANNOUNCE, + IPV4_DEVCONF_ARP_IGNORE, + IPV4_DEVCONF_PROMOTE_SECONDARIES, + IPV4_DEVCONF_ARP_ACCEPT, + IPV4_DEVCONF_ARP_NOTIFY, + IPV4_DEVCONF_ACCEPT_LOCAL, + IPV4_DEVCONF_SRC_VMARK, + IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, + IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL, + IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL, + IPV4_DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, + IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, + IPV4_DEVCONF_DROP_GRATUITOUS_ARP, + IPV4_DEVCONF_BC_FORWARDING, + IPV4_DEVCONF_ARP_EVICT_NOCARRIER, + __IPV4_DEVCONF_MAX +}; + +#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1) + +#endif /* _LINUX_IP_H */ diff --git a/include/uapi/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h new file mode 100644 index 0000000..0245269 --- /dev/null +++ b/include/uapi/linux/ip6_tunnel.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _IP6_TUNNEL_H +#define _IP6_TUNNEL_H + +#include <linux/types.h> +#include <linux/if.h> /* For IFNAMSIZ. */ +#include <linux/in6.h> /* For struct in6_addr. */ + +#define IPV6_TLV_TNL_ENCAP_LIMIT 4 +#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4 + +/* don't add encapsulation limit if one isn't present in inner packet */ +#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1 +/* copy the traffic class field from the inner packet */ +#define IP6_TNL_F_USE_ORIG_TCLASS 0x2 +/* copy the flowlabel from the inner packet */ +#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4 +/* being used for Mobile IPv6 */ +#define IP6_TNL_F_MIP6_DEV 0x8 +/* copy DSCP from the outer packet */ +#define IP6_TNL_F_RCV_DSCP_COPY 0x10 +/* copy fwmark from inner packet */ +#define IP6_TNL_F_USE_ORIG_FWMARK 0x20 +/* allow remote endpoint on the local node */ +#define IP6_TNL_F_ALLOW_LOCAL_REMOTE 0x40 + +struct ip6_tnl_parm { + char name[IFNAMSIZ]; /* name of tunnel device */ + int link; /* ifindex of underlying L2 interface */ + __u8 proto; /* tunnel protocol */ + __u8 encap_limit; /* encapsulation limit for tunnel */ + __u8 hop_limit; /* hop limit for tunnel */ + __be32 flowinfo; /* traffic class and flowlabel for tunnel */ + __u32 flags; /* tunnel flags */ + struct in6_addr laddr; /* local tunnel end-point address */ + struct in6_addr raddr; /* remote tunnel end-point address */ +}; + +struct ip6_tnl_parm2 { + char name[IFNAMSIZ]; /* name of tunnel device */ + int link; /* ifindex of underlying L2 interface */ + __u8 proto; /* tunnel protocol */ + __u8 encap_limit; /* encapsulation limit for tunnel */ + __u8 hop_limit; /* hop limit for tunnel */ + __be32 flowinfo; /* traffic class and flowlabel for tunnel */ + __u32 flags; /* tunnel flags */ + struct in6_addr laddr; /* local tunnel end-point address */ + struct in6_addr raddr; /* remote tunnel end-point address */ + + __be16 i_flags; + __be16 o_flags; + __be32 i_key; + __be32 o_key; +}; + +#endif diff --git a/include/uapi/linux/ipsec.h b/include/uapi/linux/ipsec.h new file mode 100644 index 0000000..50d8ee1 --- /dev/null +++ b/include/uapi/linux/ipsec.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_IPSEC_H +#define _LINUX_IPSEC_H + +/* The definitions, required to talk to KAME racoon IKE. */ + +#include <linux/pfkeyv2.h> + +#define IPSEC_PORT_ANY 0 +#define IPSEC_ULPROTO_ANY 255 +#define IPSEC_PROTO_ANY 255 + +enum { + IPSEC_MODE_ANY = 0, /* We do not support this for SA */ + IPSEC_MODE_TRANSPORT = 1, + IPSEC_MODE_TUNNEL = 2, + IPSEC_MODE_BEET = 3 +}; + +enum { + IPSEC_DIR_ANY = 0, + IPSEC_DIR_INBOUND = 1, + IPSEC_DIR_OUTBOUND = 2, + IPSEC_DIR_FWD = 3, /* It is our own */ + IPSEC_DIR_MAX = 4, + IPSEC_DIR_INVALID = 5 +}; + +enum { + IPSEC_POLICY_DISCARD = 0, + IPSEC_POLICY_NONE = 1, + IPSEC_POLICY_IPSEC = 2, + IPSEC_POLICY_ENTRUST = 3, + IPSEC_POLICY_BYPASS = 4 +}; + +enum { + IPSEC_LEVEL_DEFAULT = 0, + IPSEC_LEVEL_USE = 1, + IPSEC_LEVEL_REQUIRE = 2, + IPSEC_LEVEL_UNIQUE = 3 +}; + +#define IPSEC_MANUAL_REQID_MAX 0x3fff + +#define IPSEC_REPLAYWSIZE 32 + +#endif /* _LINUX_IPSEC_H */ diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h new file mode 100644 index 0000000..5413a8c --- /dev/null +++ b/include/uapi/linux/kernel.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_KERNEL_H +#define _LINUX_KERNEL_H + +#include <linux/sysinfo.h> +#include <linux/const.h> + +#endif /* _LINUX_KERNEL_H */ diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h new file mode 100644 index 0000000..e7705e8 --- /dev/null +++ b/include/uapi/linux/l2tp.h @@ -0,0 +1,203 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * L2TP-over-IP socket for L2TPv3. + * + * Author: James Chapman <jchapman@katalix.com> + */ + +#ifndef _LINUX_L2TP_H_ +#define _LINUX_L2TP_H_ + +#include <linux/types.h> +#include <linux/socket.h> +#include <linux/in.h> +#include <linux/in6.h> + +/** + * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_l2tpip { + /* The first fields must match struct sockaddr_in */ + __kernel_sa_family_t l2tp_family; /* AF_INET */ + __be16 l2tp_unused; /* INET port number (unused) */ + struct in_addr l2tp_addr; /* Internet address */ + + __u32 l2tp_conn_id; /* Connection ID of tunnel */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - + sizeof(__kernel_sa_family_t) - + sizeof(__be16) - sizeof(struct in_addr) - + sizeof(__u32)]; +}; + +/** + * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +struct sockaddr_l2tpip6 { + /* The first fields must match struct sockaddr_in6 */ + __kernel_sa_family_t l2tp_family; /* AF_INET6 */ + __be16 l2tp_unused; /* INET port number (unused) */ + __be32 l2tp_flowinfo; /* IPv6 flow information */ + struct in6_addr l2tp_addr; /* IPv6 address */ + __u32 l2tp_scope_id; /* scope id (new in RFC2553) */ + __u32 l2tp_conn_id; /* Connection ID of tunnel */ +}; + +/***************************************************************************** + * NETLINK_GENERIC netlink family. + *****************************************************************************/ + +/* + * Commands. + * Valid TLVs of each command are:- + * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum + * TUNNEL_DELETE - CONN_ID + * TUNNEL_MODIFY - CONN_ID, udpcsum + * TUNNEL_GETSTATS - CONN_ID, (stats) + * TUNNEL_GET - CONN_ID, (...) + * SESSION_CREATE - SESSION_ID, PW_TYPE, cookie, peer_cookie, l2spec + * SESSION_DELETE - SESSION_ID + * SESSION_MODIFY - SESSION_ID + * SESSION_GET - SESSION_ID, (...) + * SESSION_GETSTATS - SESSION_ID, (stats) + * + */ +enum { + L2TP_CMD_NOOP, + L2TP_CMD_TUNNEL_CREATE, + L2TP_CMD_TUNNEL_DELETE, + L2TP_CMD_TUNNEL_MODIFY, + L2TP_CMD_TUNNEL_GET, + L2TP_CMD_SESSION_CREATE, + L2TP_CMD_SESSION_DELETE, + L2TP_CMD_SESSION_MODIFY, + L2TP_CMD_SESSION_GET, + __L2TP_CMD_MAX, +}; + +#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1) + +/* + * ATTR types defined for L2TP + */ +enum { + L2TP_ATTR_NONE, /* no data */ + L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */ + L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */ + L2TP_ATTR_OFFSET, /* u16 (not used) */ + L2TP_ATTR_DATA_SEQ, /* u16 (not used) */ + L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */ + L2TP_ATTR_L2SPEC_LEN, /* u8 (not used) */ + L2TP_ATTR_PROTO_VERSION, /* u8 */ + L2TP_ATTR_IFNAME, /* string */ + L2TP_ATTR_CONN_ID, /* u32 */ + L2TP_ATTR_PEER_CONN_ID, /* u32 */ + L2TP_ATTR_SESSION_ID, /* u32 */ + L2TP_ATTR_PEER_SESSION_ID, /* u32 */ + L2TP_ATTR_UDP_CSUM, /* u8 */ + L2TP_ATTR_VLAN_ID, /* u16 (not used) */ + L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags (not used) */ + L2TP_ATTR_RECV_SEQ, /* u8 */ + L2TP_ATTR_SEND_SEQ, /* u8 */ + L2TP_ATTR_LNS_MODE, /* u8 */ + L2TP_ATTR_USING_IPSEC, /* u8 */ + L2TP_ATTR_RECV_TIMEOUT, /* msec */ + L2TP_ATTR_FD, /* int */ + L2TP_ATTR_IP_SADDR, /* u32 */ + L2TP_ATTR_IP_DADDR, /* u32 */ + L2TP_ATTR_UDP_SPORT, /* u16 */ + L2TP_ATTR_UDP_DPORT, /* u16 */ + L2TP_ATTR_MTU, /* u16 (not used) */ + L2TP_ATTR_MRU, /* u16 (not used) */ + L2TP_ATTR_STATS, /* nested */ + L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ + L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ + L2TP_ATTR_UDP_ZERO_CSUM6_TX, /* flag */ + L2TP_ATTR_UDP_ZERO_CSUM6_RX, /* flag */ + L2TP_ATTR_PAD, + __L2TP_ATTR_MAX, +}; + +#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1) + +/* Nested in L2TP_ATTR_STATS */ +enum { + L2TP_ATTR_STATS_NONE, /* no data */ + L2TP_ATTR_TX_PACKETS, /* u64 */ + L2TP_ATTR_TX_BYTES, /* u64 */ + L2TP_ATTR_TX_ERRORS, /* u64 */ + L2TP_ATTR_RX_PACKETS, /* u64 */ + L2TP_ATTR_RX_BYTES, /* u64 */ + L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */ + L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ + L2TP_ATTR_RX_ERRORS, /* u64 */ + L2TP_ATTR_STATS_PAD, + L2TP_ATTR_RX_COOKIE_DISCARDS, /* u64 */ + L2TP_ATTR_RX_INVALID, /* u64 */ + __L2TP_ATTR_STATS_MAX, +}; + +#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1) + +enum l2tp_pwtype { + L2TP_PWTYPE_NONE = 0x0000, + L2TP_PWTYPE_ETH_VLAN = 0x0004, + L2TP_PWTYPE_ETH = 0x0005, + L2TP_PWTYPE_PPP = 0x0007, + L2TP_PWTYPE_PPP_AC = 0x0008, + L2TP_PWTYPE_IP = 0x000b, + __L2TP_PWTYPE_MAX +}; + +enum l2tp_l2spec_type { + L2TP_L2SPECTYPE_NONE, + L2TP_L2SPECTYPE_DEFAULT, +}; + +enum l2tp_encap_type { + L2TP_ENCAPTYPE_UDP, + L2TP_ENCAPTYPE_IP, +}; + +/* For L2TP_ATTR_DATA_SEQ. Unused. */ +enum l2tp_seqmode { + L2TP_SEQ_NONE = 0, + L2TP_SEQ_IP = 1, + L2TP_SEQ_ALL = 2, +}; + +/** + * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions. + * + * Unused. + * + * @L2TP_MSG_DEBUG: verbose debug (if compiled in) + * @L2TP_MSG_CONTROL: userspace - kernel interface + * @L2TP_MSG_SEQ: sequence numbers + * @L2TP_MSG_DATA: data packets + */ +enum l2tp_debug_flags { + L2TP_MSG_DEBUG = (1 << 0), + L2TP_MSG_CONTROL = (1 << 1), + L2TP_MSG_SEQ = (1 << 2), + L2TP_MSG_DATA = (1 << 3), +}; + +/* + * NETLINK_GENERIC related info + */ +#define L2TP_GENL_NAME "l2tp" +#define L2TP_GENL_VERSION 0x1 +#define L2TP_GENL_MCGROUP "l2tp" + +#endif /* _LINUX_L2TP_H_ */ diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h new file mode 100644 index 0000000..a159991 --- /dev/null +++ b/include/uapi/linux/libc-compat.h @@ -0,0 +1,267 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Compatibility interface for userspace libc header coordination: + * + * Define compatibility macros that are used to control the inclusion or + * exclusion of UAPI structures and definitions in coordination with another + * userspace C library. + * + * This header is intended to solve the problem of UAPI definitions that + * conflict with userspace definitions. If a UAPI header has such conflicting + * definitions then the solution is as follows: + * + * * Synchronize the UAPI header and the libc headers so either one can be + * used and such that the ABI is preserved. If this is not possible then + * no simple compatibility interface exists (you need to write translating + * wrappers and rename things) and you can't use this interface. + * + * Then follow this process: + * + * (a) Include libc-compat.h in the UAPI header. + * e.g. #include <linux/libc-compat.h> + * This include must be as early as possible. + * + * (b) In libc-compat.h add enough code to detect that the comflicting + * userspace libc header has been included first. + * + * (c) If the userspace libc header has been included first define a set of + * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else + * set their values to 0. + * + * (d) Back in the UAPI header with the conflicting definitions, guard the + * definitions with: + * #if __UAPI_DEF_FOO + * ... + * #endif + * + * This fixes the situation where the linux headers are included *after* the + * libc headers. To fix the problem with the inclusion in the other order the + * userspace libc headers must be fixed like this: + * + * * For all definitions that conflict with kernel definitions wrap those + * defines in the following: + * #if !__UAPI_DEF_FOO + * ... + * #endif + * + * This prevents the redefinition of a construct already defined by the kernel. + */ +#ifndef _LIBC_COMPAT_H +#define _LIBC_COMPAT_H + +/* We have included glibc headers... */ +#if defined(__GLIBC__) + +/* Coordinate with glibc net/if.h header. */ +#if defined(_NET_IF_H) && defined(__USE_MISC) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ + +#define __UAPI_DEF_IF_IFCONF 0 +#define __UAPI_DEF_IF_IFMAP 0 +#define __UAPI_DEF_IF_IFNAMSIZ 0 +#define __UAPI_DEF_IF_IFREQ 0 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 0 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ + +#else /* _NET_IF_H */ + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ + +#define __UAPI_DEF_IF_IFCONF 1 +#define __UAPI_DEF_IF_IFMAP 1 +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#define __UAPI_DEF_IF_IFREQ 1 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 + +#endif /* _NET_IF_H */ + +/* Coordinate with glibc netinet/in.h header. */ +#if defined(_NETINET_IN_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ +#define __UAPI_DEF_IN_ADDR 0 +#define __UAPI_DEF_IN_IPPROTO 0 +#define __UAPI_DEF_IN_PKTINFO 0 +#define __UAPI_DEF_IP_MREQ 0 +#define __UAPI_DEF_SOCKADDR_IN 0 +#define __UAPI_DEF_IN_CLASS 0 + +#define __UAPI_DEF_IN6_ADDR 0 +/* The exception is the in6_addr macros which must be defined + * if the glibc code didn't define them. This guard matches + * the guard in glibc/inet/netinet/in.h which defines the + * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ +#if defined(__USE_MISC) || defined (__USE_GNU) +#define __UAPI_DEF_IN6_ADDR_ALT 0 +#else +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#define __UAPI_DEF_SOCKADDR_IN6 0 +#define __UAPI_DEF_IPV6_MREQ 0 +#define __UAPI_DEF_IPPROTO_V6 0 +#define __UAPI_DEF_IPV6_OPTIONS 0 +#define __UAPI_DEF_IN6_PKTINFO 0 +#define __UAPI_DEF_IP6_MTUINFO 0 + +#else + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ +#define __UAPI_DEF_IN_ADDR 1 +#define __UAPI_DEF_IN_IPPROTO 1 +#define __UAPI_DEF_IN_PKTINFO 1 +#define __UAPI_DEF_IP_MREQ 1 +#define __UAPI_DEF_SOCKADDR_IN 1 +#define __UAPI_DEF_IN_CLASS 1 + +#define __UAPI_DEF_IN6_ADDR 1 +/* We unconditionally define the in6_addr macros and glibc must + * coordinate. */ +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 +#define __UAPI_DEF_IPV6_OPTIONS 1 +#define __UAPI_DEF_IN6_PKTINFO 1 +#define __UAPI_DEF_IP6_MTUINFO 1 + +#endif /* _NETINET_IN_H */ + +/* Coordinate with glibc netipx/ipx.h header. */ +#if defined(__NETIPX_IPX_H) + +#define __UAPI_DEF_SOCKADDR_IPX 0 +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 0 +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 0 +#define __UAPI_DEF_IPX_CONFIG_DATA 0 +#define __UAPI_DEF_IPX_ROUTE_DEF 0 + +#else /* defined(__NETIPX_IPX_H) */ + +#define __UAPI_DEF_SOCKADDR_IPX 1 +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 +#define __UAPI_DEF_IPX_CONFIG_DATA 1 +#define __UAPI_DEF_IPX_ROUTE_DEF 1 + +#endif /* defined(__NETIPX_IPX_H) */ + +/* Definitions for xattr.h */ +#if defined(_SYS_XATTR_H) +#define __UAPI_DEF_XATTR 0 +#else +#define __UAPI_DEF_XATTR 1 +#endif + +/* If we did not see any headers from any supported C libraries, + * or we are being included in the kernel, then define everything + * that we need. Check for previous __UAPI_* definitions to give + * unsupported C libraries a way to opt out of any kernel definition. */ +#else /* !defined(__GLIBC__) */ + +/* Definitions for if.h */ +#ifndef __UAPI_DEF_IF_IFCONF +#define __UAPI_DEF_IF_IFCONF 1 +#endif +#ifndef __UAPI_DEF_IF_IFMAP +#define __UAPI_DEF_IF_IFMAP 1 +#endif +#ifndef __UAPI_DEF_IF_IFNAMSIZ +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#endif +#ifndef __UAPI_DEF_IF_IFREQ +#define __UAPI_DEF_IF_IFREQ 1 +#endif +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +#endif +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 +#endif + +/* Definitions for in.h */ +#ifndef __UAPI_DEF_IN_ADDR +#define __UAPI_DEF_IN_ADDR 1 +#endif +#ifndef __UAPI_DEF_IN_IPPROTO +#define __UAPI_DEF_IN_IPPROTO 1 +#endif +#ifndef __UAPI_DEF_IN_PKTINFO +#define __UAPI_DEF_IN_PKTINFO 1 +#endif +#ifndef __UAPI_DEF_IP_MREQ +#define __UAPI_DEF_IP_MREQ 1 +#endif +#ifndef __UAPI_DEF_SOCKADDR_IN +#define __UAPI_DEF_SOCKADDR_IN 1 +#endif +#ifndef __UAPI_DEF_IN_CLASS +#define __UAPI_DEF_IN_CLASS 1 +#endif + +/* Definitions for in6.h */ +#ifndef __UAPI_DEF_IN6_ADDR +#define __UAPI_DEF_IN6_ADDR 1 +#endif +#ifndef __UAPI_DEF_IN6_ADDR_ALT +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#ifndef __UAPI_DEF_SOCKADDR_IN6 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#endif +#ifndef __UAPI_DEF_IPV6_MREQ +#define __UAPI_DEF_IPV6_MREQ 1 +#endif +#ifndef __UAPI_DEF_IPPROTO_V6 +#define __UAPI_DEF_IPPROTO_V6 1 +#endif +#ifndef __UAPI_DEF_IPV6_OPTIONS +#define __UAPI_DEF_IPV6_OPTIONS 1 +#endif +#ifndef __UAPI_DEF_IN6_PKTINFO +#define __UAPI_DEF_IN6_PKTINFO 1 +#endif +#ifndef __UAPI_DEF_IP6_MTUINFO +#define __UAPI_DEF_IP6_MTUINFO 1 +#endif + +/* Definitions for ipx.h */ +#ifndef __UAPI_DEF_SOCKADDR_IPX +#define __UAPI_DEF_SOCKADDR_IPX 1 +#endif +#ifndef __UAPI_DEF_IPX_ROUTE_DEFINITION +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 +#endif +#ifndef __UAPI_DEF_IPX_INTERFACE_DEFINITION +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 +#endif +#ifndef __UAPI_DEF_IPX_CONFIG_DATA +#define __UAPI_DEF_IPX_CONFIG_DATA 1 +#endif +#ifndef __UAPI_DEF_IPX_ROUTE_DEF +#define __UAPI_DEF_IPX_ROUTE_DEF 1 +#endif + +/* Definitions for xattr.h */ +#ifndef __UAPI_DEF_XATTR +#define __UAPI_DEF_XATTR 1 +#endif + +#endif /* __GLIBC__ */ + +#endif /* _LIBC_COMPAT_H */ diff --git a/include/uapi/linux/limits.h b/include/uapi/linux/limits.h new file mode 100644 index 0000000..c3547f0 --- /dev/null +++ b/include/uapi/linux/limits.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_LIMITS_H +#define _LINUX_LIMITS_H + +#define NR_OPEN 1024 + +#define NGROUPS_MAX 65536 /* supplemental group IDs are available */ +#define ARG_MAX 131072 /* # bytes of args + environ for exec() */ +#define LINK_MAX 127 /* # links a file may have */ +#define MAX_CANON 255 /* size of the canonical input queue */ +#define MAX_INPUT 255 /* size of the type-ahead buffer */ +#define NAME_MAX 255 /* # chars in a file name */ +#define PATH_MAX 4096 /* # chars in a path name including nul */ +#define PIPE_BUF 4096 /* # bytes in atomic write to a pipe */ +#define XATTR_NAME_MAX 255 /* # chars in an extended attribute name */ +#define XATTR_SIZE_MAX 65536 /* size of an extended attribute value (64k) */ +#define XATTR_LIST_MAX 65536 /* size of extended attribute namelist (64k) */ + +#define RTSIG_MAX 32 + +#endif diff --git a/include/uapi/linux/lwtunnel.h b/include/uapi/linux/lwtunnel.h new file mode 100644 index 0000000..9d22961 --- /dev/null +++ b/include/uapi/linux/lwtunnel.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LWTUNNEL_H_ +#define _LWTUNNEL_H_ + +#include <linux/types.h> + +enum lwtunnel_encap_types { + LWTUNNEL_ENCAP_NONE, + LWTUNNEL_ENCAP_MPLS, + LWTUNNEL_ENCAP_IP, + LWTUNNEL_ENCAP_ILA, + LWTUNNEL_ENCAP_IP6, + LWTUNNEL_ENCAP_SEG6, + LWTUNNEL_ENCAP_BPF, + LWTUNNEL_ENCAP_SEG6_LOCAL, + LWTUNNEL_ENCAP_RPL, + LWTUNNEL_ENCAP_IOAM6, + LWTUNNEL_ENCAP_XFRM, + __LWTUNNEL_ENCAP_MAX, +}; + +#define LWTUNNEL_ENCAP_MAX (__LWTUNNEL_ENCAP_MAX - 1) + +enum lwtunnel_ip_t { + LWTUNNEL_IP_UNSPEC, + LWTUNNEL_IP_ID, + LWTUNNEL_IP_DST, + LWTUNNEL_IP_SRC, + LWTUNNEL_IP_TTL, + LWTUNNEL_IP_TOS, + LWTUNNEL_IP_FLAGS, + LWTUNNEL_IP_PAD, + LWTUNNEL_IP_OPTS, + __LWTUNNEL_IP_MAX, +}; + +#define LWTUNNEL_IP_MAX (__LWTUNNEL_IP_MAX - 1) + +enum lwtunnel_ip6_t { + LWTUNNEL_IP6_UNSPEC, + LWTUNNEL_IP6_ID, + LWTUNNEL_IP6_DST, + LWTUNNEL_IP6_SRC, + LWTUNNEL_IP6_HOPLIMIT, + LWTUNNEL_IP6_TC, + LWTUNNEL_IP6_FLAGS, + LWTUNNEL_IP6_PAD, + LWTUNNEL_IP6_OPTS, + __LWTUNNEL_IP6_MAX, +}; + +#define LWTUNNEL_IP6_MAX (__LWTUNNEL_IP6_MAX - 1) + +enum { + LWTUNNEL_IP_OPTS_UNSPEC, + LWTUNNEL_IP_OPTS_GENEVE, + LWTUNNEL_IP_OPTS_VXLAN, + LWTUNNEL_IP_OPTS_ERSPAN, + __LWTUNNEL_IP_OPTS_MAX, +}; + +#define LWTUNNEL_IP_OPTS_MAX (__LWTUNNEL_IP_OPTS_MAX - 1) + +enum { + LWTUNNEL_IP_OPT_GENEVE_UNSPEC, + LWTUNNEL_IP_OPT_GENEVE_CLASS, + LWTUNNEL_IP_OPT_GENEVE_TYPE, + LWTUNNEL_IP_OPT_GENEVE_DATA, + __LWTUNNEL_IP_OPT_GENEVE_MAX, +}; + +#define LWTUNNEL_IP_OPT_GENEVE_MAX (__LWTUNNEL_IP_OPT_GENEVE_MAX - 1) + +enum { + LWTUNNEL_IP_OPT_VXLAN_UNSPEC, + LWTUNNEL_IP_OPT_VXLAN_GBP, + __LWTUNNEL_IP_OPT_VXLAN_MAX, +}; + +#define LWTUNNEL_IP_OPT_VXLAN_MAX (__LWTUNNEL_IP_OPT_VXLAN_MAX - 1) + +enum { + LWTUNNEL_IP_OPT_ERSPAN_UNSPEC, + LWTUNNEL_IP_OPT_ERSPAN_VER, + LWTUNNEL_IP_OPT_ERSPAN_INDEX, + LWTUNNEL_IP_OPT_ERSPAN_DIR, + LWTUNNEL_IP_OPT_ERSPAN_HWID, + __LWTUNNEL_IP_OPT_ERSPAN_MAX, +}; + +#define LWTUNNEL_IP_OPT_ERSPAN_MAX (__LWTUNNEL_IP_OPT_ERSPAN_MAX - 1) + +enum { + LWT_BPF_PROG_UNSPEC, + LWT_BPF_PROG_FD, + LWT_BPF_PROG_NAME, + __LWT_BPF_PROG_MAX, +}; + +#define LWT_BPF_PROG_MAX (__LWT_BPF_PROG_MAX - 1) + +enum { + LWT_BPF_UNSPEC, + LWT_BPF_IN, + LWT_BPF_OUT, + LWT_BPF_XMIT, + LWT_BPF_XMIT_HEADROOM, + __LWT_BPF_MAX, +}; + +#define LWT_BPF_MAX (__LWT_BPF_MAX - 1) + +#define LWT_BPF_MAX_HEADROOM 256 + +enum { + LWT_XFRM_UNSPEC, + LWT_XFRM_IF_ID, + LWT_XFRM_LINK, + __LWT_XFRM_MAX, +}; + +#define LWT_XFRM_MAX (__LWT_XFRM_MAX - 1) + +#endif /* _LWTUNNEL_H_ */ diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h new file mode 100644 index 0000000..6325d1d --- /dev/null +++ b/include/uapi/linux/magic.h @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_MAGIC_H__ +#define __LINUX_MAGIC_H__ + +#define ADFS_SUPER_MAGIC 0xadf5 +#define AFFS_SUPER_MAGIC 0xadff +#define AFS_SUPER_MAGIC 0x5346414F +#define AUTOFS_SUPER_MAGIC 0x0187 +#define CEPH_SUPER_MAGIC 0x00c36400 +#define CODA_SUPER_MAGIC 0x73757245 +#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ +#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ +#define DEBUGFS_MAGIC 0x64626720 +#define SECURITYFS_MAGIC 0x73636673 +#define SELINUX_MAGIC 0xf97cff8c +#define SMACK_MAGIC 0x43415d53 /* "SMAC" */ +#define RAMFS_MAGIC 0x858458f6 /* some random number */ +#define TMPFS_MAGIC 0x01021994 +#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ +#define SQUASHFS_MAGIC 0x73717368 +#define ECRYPTFS_SUPER_MAGIC 0xf15f +#define EFS_SUPER_MAGIC 0x414A53 +#define EROFS_SUPER_MAGIC_V1 0xE0F5E1E2 +#define EXT2_SUPER_MAGIC 0xEF53 +#define EXT3_SUPER_MAGIC 0xEF53 +#define XENFS_SUPER_MAGIC 0xabba1974 +#define EXT4_SUPER_MAGIC 0xEF53 +#define BTRFS_SUPER_MAGIC 0x9123683E +#define NILFS_SUPER_MAGIC 0x3434 +#define F2FS_SUPER_MAGIC 0xF2F52010 +#define HPFS_SUPER_MAGIC 0xf995e849 +#define ISOFS_SUPER_MAGIC 0x9660 +#define JFFS2_SUPER_MAGIC 0x72b6 +#define XFS_SUPER_MAGIC 0x58465342 /* "XFSB" */ +#define PSTOREFS_MAGIC 0x6165676C +#define EFIVARFS_MAGIC 0xde5e81e4 +#define HOSTFS_SUPER_MAGIC 0x00c0ffee +#define OVERLAYFS_SUPER_MAGIC 0x794c7630 +#define FUSE_SUPER_MAGIC 0x65735546 + +#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ +#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ +#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */ +#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */ +#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */ + +#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */ +#define EXFAT_SUPER_MAGIC 0x2011BAB0 +#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ +#define NFS_SUPER_MAGIC 0x6969 +#define OCFS2_SUPER_MAGIC 0x7461636f +#define OPENPROM_SUPER_MAGIC 0x9fa1 +#define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */ +#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ +#define AFS_FS_MAGIC 0x6B414653 + + +#define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */ + /* used by file system utilities that + look at the superblock, etc. */ +#define REISERFS_SUPER_MAGIC_STRING "ReIsErFs" +#define REISER2FS_SUPER_MAGIC_STRING "ReIsEr2Fs" +#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" + +#define SMB_SUPER_MAGIC 0x517B +#define CIFS_SUPER_MAGIC 0xFF534D42 /* the first four bytes of SMB PDUs */ +#define SMB2_SUPER_MAGIC 0xFE534D42 + +#define CGROUP_SUPER_MAGIC 0x27e0eb +#define CGROUP2_SUPER_MAGIC 0x63677270 + +#define RDTGROUP_SUPER_MAGIC 0x7655821 + +#define STACK_END_MAGIC 0x57AC6E9D + +#define TRACEFS_MAGIC 0x74726163 + +#define V9FS_MAGIC 0x01021997 + +#define BDEVFS_MAGIC 0x62646576 +#define DAXFS_MAGIC 0x64646178 +#define BINFMTFS_MAGIC 0x42494e4d +#define DEVPTS_SUPER_MAGIC 0x1cd1 +#define BINDERFS_SUPER_MAGIC 0x6c6f6f70 +#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA +#define PIPEFS_MAGIC 0x50495045 +#define PROC_SUPER_MAGIC 0x9fa0 +#define SOCKFS_MAGIC 0x534F434B +#define SYSFS_MAGIC 0x62656572 +#define USBDEVICE_SUPER_MAGIC 0x9fa2 +#define MTD_INODE_FS_MAGIC 0x11307854 +#define ANON_INODE_FS_MAGIC 0x09041934 +#define BTRFS_TEST_MAGIC 0x73727279 +#define NSFS_MAGIC 0x6e736673 +#define BPF_FS_MAGIC 0xcafe4a11 +#define AAFS_MAGIC 0x5a3c69f0 +#define ZONEFS_MAGIC 0x5a4f4653 + +/* Since UDF 2.01 is ISO 13346 based... */ +#define UDF_SUPER_MAGIC 0x15013346 +#define DMA_BUF_MAGIC 0x444d4142 /* "DMAB" */ +#define DEVMEM_MAGIC 0x454d444d /* "DMEM" */ +#define SECRETMEM_MAGIC 0x5345434d /* "SECM" */ + +#endif /* __LINUX_MAGIC_H__ */ diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h new file mode 100644 index 0000000..9effbf9 --- /dev/null +++ b/include/uapi/linux/mpls.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _MPLS_H +#define _MPLS_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* Reference: RFC 5462, RFC 3032 + * + * 0 1 2 3 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Label | TC |S| TTL | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * Label: Label Value, 20 bits + * TC: Traffic Class field, 3 bits + * S: Bottom of Stack, 1 bit + * TTL: Time to Live, 8 bits + */ + +struct mpls_label { + __be32 entry; +}; + +#define MPLS_LS_LABEL_MASK 0xFFFFF000 +#define MPLS_LS_LABEL_SHIFT 12 +#define MPLS_LS_TC_MASK 0x00000E00 +#define MPLS_LS_TC_SHIFT 9 +#define MPLS_LS_S_MASK 0x00000100 +#define MPLS_LS_S_SHIFT 8 +#define MPLS_LS_TTL_MASK 0x000000FF +#define MPLS_LS_TTL_SHIFT 0 + +/* Reserved labels */ +#define MPLS_LABEL_IPV4NULL 0 /* RFC3032 */ +#define MPLS_LABEL_RTALERT 1 /* RFC3032 */ +#define MPLS_LABEL_IPV6NULL 2 /* RFC3032 */ +#define MPLS_LABEL_IMPLNULL 3 /* RFC3032 */ +#define MPLS_LABEL_ENTROPY 7 /* RFC6790 */ +#define MPLS_LABEL_GAL 13 /* RFC5586 */ +#define MPLS_LABEL_OAMALERT 14 /* RFC3429 */ +#define MPLS_LABEL_EXTENSION 15 /* RFC7274 */ + +#define MPLS_LABEL_FIRST_UNRESERVED 16 /* RFC3032 */ + +/* These are embedded into IFLA_STATS_AF_SPEC: + * [IFLA_STATS_AF_SPEC] + * -> [AF_MPLS] + * -> [MPLS_STATS_xxx] + * + * Attributes: + * [MPLS_STATS_LINK] = { + * struct mpls_link_stats + * } + */ +enum { + MPLS_STATS_UNSPEC, /* also used as 64bit pad attribute */ + MPLS_STATS_LINK, + __MPLS_STATS_MAX, +}; + +#define MPLS_STATS_MAX (__MPLS_STATS_MAX - 1) + +struct mpls_link_stats { + __u64 rx_packets; /* total packets received */ + __u64 tx_packets; /* total packets transmitted */ + __u64 rx_bytes; /* total bytes received */ + __u64 tx_bytes; /* total bytes transmitted */ + __u64 rx_errors; /* bad packets received */ + __u64 tx_errors; /* packet transmit problems */ + __u64 rx_dropped; /* packet dropped on receive */ + __u64 tx_dropped; /* packet dropped on transmit */ + __u64 rx_noroute; /* no route for packet dest */ +}; + +#endif /* _MPLS_H */ diff --git a/include/uapi/linux/mpls_iptunnel.h b/include/uapi/linux/mpls_iptunnel.h new file mode 100644 index 0000000..2c69b7d --- /dev/null +++ b/include/uapi/linux/mpls_iptunnel.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * mpls tunnel api + * + * Authors: + * Roopa Prabhu <roopa@cumulusnetworks.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_MPLS_IPTUNNEL_H +#define _LINUX_MPLS_IPTUNNEL_H + +/* MPLS tunnel attributes + * [RTA_ENCAP] = { + * [MPLS_IPTUNNEL_DST] + * [MPLS_IPTUNNEL_TTL] + * } + */ +enum { + MPLS_IPTUNNEL_UNSPEC, + MPLS_IPTUNNEL_DST, + MPLS_IPTUNNEL_TTL, + __MPLS_IPTUNNEL_MAX, +}; +#define MPLS_IPTUNNEL_MAX (__MPLS_IPTUNNEL_MAX - 1) + +#endif /* _LINUX_MPLS_IPTUNNEL_H */ diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h new file mode 100644 index 0000000..c2e6f3b --- /dev/null +++ b/include/uapi/linux/mptcp.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +#ifndef _MPTCP_H +#define _MPTCP_H + +#include <netinet/in.h> /* for sockaddr_in and sockaddr_in6 */ +#include <sys/socket.h> /* for struct sockaddr */ + +#include <linux/const.h> +#include <linux/types.h> +#include <linux/in.h> /* for sockaddr_in */ +#include <linux/in6.h> /* for sockaddr_in6 */ +#include <linux/socket.h> /* for sockaddr_storage and sa_family */ + +#define MPTCP_SUBFLOW_FLAG_MCAP_REM _BITUL(0) +#define MPTCP_SUBFLOW_FLAG_MCAP_LOC _BITUL(1) +#define MPTCP_SUBFLOW_FLAG_JOIN_REM _BITUL(2) +#define MPTCP_SUBFLOW_FLAG_JOIN_LOC _BITUL(3) +#define MPTCP_SUBFLOW_FLAG_BKUP_REM _BITUL(4) +#define MPTCP_SUBFLOW_FLAG_BKUP_LOC _BITUL(5) +#define MPTCP_SUBFLOW_FLAG_FULLY_ESTABLISHED _BITUL(6) +#define MPTCP_SUBFLOW_FLAG_CONNECTED _BITUL(7) +#define MPTCP_SUBFLOW_FLAG_MAPVALID _BITUL(8) + +#define MPTCP_PM_CMD_GRP_NAME "mptcp_pm_cmds" +#define MPTCP_PM_EV_GRP_NAME "mptcp_pm_events" + +#include <linux/mptcp_pm.h> + +#define MPTCP_INFO_FLAG_FALLBACK _BITUL(0) +#define MPTCP_INFO_FLAG_REMOTE_KEY_RECEIVED _BITUL(1) + +#define MPTCP_PM_ADDR_FLAG_SIGNAL (1 << 0) +#define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1) +#define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2) +#define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3) +#define MPTCP_PM_ADDR_FLAG_IMPLICIT (1 << 4) + +struct mptcp_info { + __u8 mptcpi_subflows; + __u8 mptcpi_add_addr_signal; + __u8 mptcpi_add_addr_accepted; + __u8 mptcpi_subflows_max; + __u8 mptcpi_add_addr_signal_max; + __u8 mptcpi_add_addr_accepted_max; + __u32 mptcpi_flags; + __u32 mptcpi_token; + __u64 mptcpi_write_seq; + __u64 mptcpi_snd_una; + __u64 mptcpi_rcv_nxt; + __u8 mptcpi_local_addr_used; + __u8 mptcpi_local_addr_max; + __u8 mptcpi_csum_enabled; + __u32 mptcpi_retransmits; + __u64 mptcpi_bytes_retrans; + __u64 mptcpi_bytes_sent; + __u64 mptcpi_bytes_received; + __u64 mptcpi_bytes_acked; + __u8 mptcpi_subflows_total; +}; + +/* MPTCP Reset reason codes, rfc8684 */ +#define MPTCP_RST_EUNSPEC 0 +#define MPTCP_RST_EMPTCP 1 +#define MPTCP_RST_ERESOURCE 2 +#define MPTCP_RST_EPROHIBIT 3 +#define MPTCP_RST_EWQ2BIG 4 +#define MPTCP_RST_EBADPERF 5 +#define MPTCP_RST_EMIDDLEBOX 6 + +struct mptcp_subflow_data { + __u32 size_subflow_data; /* size of this structure in userspace */ + __u32 num_subflows; /* must be 0, set by kernel */ + __u32 size_kernel; /* must be 0, set by kernel */ + __u32 size_user; /* size of one element in data[] */ +} __attribute__((aligned(8))); + +struct mptcp_subflow_addrs { + union { + __kernel_sa_family_t sa_family; + struct sockaddr sa_local; + struct sockaddr_in sin_local; + struct sockaddr_in6 sin6_local; + struct __kernel_sockaddr_storage ss_local; + }; + union { + struct sockaddr sa_remote; + struct sockaddr_in sin_remote; + struct sockaddr_in6 sin6_remote; + struct __kernel_sockaddr_storage ss_remote; + }; +}; + +struct mptcp_subflow_info { + __u32 id; + struct mptcp_subflow_addrs addrs; +}; + +struct mptcp_full_info { + __u32 size_tcpinfo_kernel; /* must be 0, set by kernel */ + __u32 size_tcpinfo_user; + __u32 size_sfinfo_kernel; /* must be 0, set by kernel */ + __u32 size_sfinfo_user; + __u32 num_subflows; /* must be 0, set by kernel (real subflow count) */ + __u32 size_arrays_user; /* max subflows that userspace is interested in; + * the buffers at subflow_info/tcp_info + * are respectively at least: + * size_arrays * size_sfinfo_user + * size_arrays * size_tcpinfo_user + * bytes wide + */ + __aligned_u64 subflow_info; + __aligned_u64 tcp_info; + struct mptcp_info mptcp_info; +}; + +/* MPTCP socket options */ +#define MPTCP_INFO 1 +#define MPTCP_TCPINFO 2 +#define MPTCP_SUBFLOW_ADDRS 3 +#define MPTCP_FULL_INFO 4 + +#endif /* _MPTCP_H */ diff --git a/include/uapi/linux/mptcp_pm.h b/include/uapi/linux/mptcp_pm.h new file mode 100644 index 0000000..a66f18a --- /dev/null +++ b/include/uapi/linux/mptcp_pm.h @@ -0,0 +1,150 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/mptcp_pm.yaml */ +/* YNL-GEN uapi header */ + +#ifndef _LINUX_MPTCP_PM_H +#define _LINUX_MPTCP_PM_H + +#define MPTCP_PM_NAME "mptcp_pm" +#define MPTCP_PM_VER 1 + +/** + * enum mptcp_event_type + * @MPTCP_EVENT_UNSPEC: unused event + * @MPTCP_EVENT_CREATED: token, family, saddr4 | saddr6, daddr4 | daddr6, + * sport, dport A new MPTCP connection has been created. It is the good time + * to allocate memory and send ADD_ADDR if needed. Depending on the + * traffic-patterns it can take a long time until the MPTCP_EVENT_ESTABLISHED + * is sent. + * @MPTCP_EVENT_ESTABLISHED: token, family, saddr4 | saddr6, daddr4 | daddr6, + * sport, dport A MPTCP connection is established (can start new subflows). + * @MPTCP_EVENT_CLOSED: token A MPTCP connection has stopped. + * @MPTCP_EVENT_ANNOUNCED: token, rem_id, family, daddr4 | daddr6 [, dport] A + * new address has been announced by the peer. + * @MPTCP_EVENT_REMOVED: token, rem_id An address has been lost by the peer. + * @MPTCP_EVENT_SUB_ESTABLISHED: token, family, loc_id, rem_id, saddr4 | + * saddr6, daddr4 | daddr6, sport, dport, backup, if_idx [, error] A new + * subflow has been established. 'error' should not be set. + * @MPTCP_EVENT_SUB_CLOSED: token, family, loc_id, rem_id, saddr4 | saddr6, + * daddr4 | daddr6, sport, dport, backup, if_idx [, error] A subflow has been + * closed. An error (copy of sk_err) could be set if an error has been + * detected for this subflow. + * @MPTCP_EVENT_SUB_PRIORITY: token, family, loc_id, rem_id, saddr4 | saddr6, + * daddr4 | daddr6, sport, dport, backup, if_idx [, error] The priority of a + * subflow has changed. 'error' should not be set. + * @MPTCP_EVENT_LISTENER_CREATED: family, sport, saddr4 | saddr6 A new PM + * listener is created. + * @MPTCP_EVENT_LISTENER_CLOSED: family, sport, saddr4 | saddr6 A PM listener + * is closed. + */ +enum mptcp_event_type { + MPTCP_EVENT_UNSPEC, + MPTCP_EVENT_CREATED, + MPTCP_EVENT_ESTABLISHED, + MPTCP_EVENT_CLOSED, + MPTCP_EVENT_ANNOUNCED = 6, + MPTCP_EVENT_REMOVED, + MPTCP_EVENT_SUB_ESTABLISHED = 10, + MPTCP_EVENT_SUB_CLOSED, + MPTCP_EVENT_SUB_PRIORITY = 13, + MPTCP_EVENT_LISTENER_CREATED = 15, + MPTCP_EVENT_LISTENER_CLOSED, +}; + +enum { + MPTCP_PM_ADDR_ATTR_UNSPEC, + MPTCP_PM_ADDR_ATTR_FAMILY, + MPTCP_PM_ADDR_ATTR_ID, + MPTCP_PM_ADDR_ATTR_ADDR4, + MPTCP_PM_ADDR_ATTR_ADDR6, + MPTCP_PM_ADDR_ATTR_PORT, + MPTCP_PM_ADDR_ATTR_FLAGS, + MPTCP_PM_ADDR_ATTR_IF_IDX, + + __MPTCP_PM_ADDR_ATTR_MAX +}; +#define MPTCP_PM_ADDR_ATTR_MAX (__MPTCP_PM_ADDR_ATTR_MAX - 1) + +enum { + MPTCP_SUBFLOW_ATTR_UNSPEC, + MPTCP_SUBFLOW_ATTR_TOKEN_REM, + MPTCP_SUBFLOW_ATTR_TOKEN_LOC, + MPTCP_SUBFLOW_ATTR_RELWRITE_SEQ, + MPTCP_SUBFLOW_ATTR_MAP_SEQ, + MPTCP_SUBFLOW_ATTR_MAP_SFSEQ, + MPTCP_SUBFLOW_ATTR_SSN_OFFSET, + MPTCP_SUBFLOW_ATTR_MAP_DATALEN, + MPTCP_SUBFLOW_ATTR_FLAGS, + MPTCP_SUBFLOW_ATTR_ID_REM, + MPTCP_SUBFLOW_ATTR_ID_LOC, + MPTCP_SUBFLOW_ATTR_PAD, + + __MPTCP_SUBFLOW_ATTR_MAX +}; +#define MPTCP_SUBFLOW_ATTR_MAX (__MPTCP_SUBFLOW_ATTR_MAX - 1) + +enum { + MPTCP_PM_ENDPOINT_ADDR = 1, + + __MPTCP_PM_ENDPOINT_MAX +}; +#define MPTCP_PM_ENDPOINT_MAX (__MPTCP_PM_ENDPOINT_MAX - 1) + +enum { + MPTCP_PM_ATTR_UNSPEC, + MPTCP_PM_ATTR_ADDR, + MPTCP_PM_ATTR_RCV_ADD_ADDRS, + MPTCP_PM_ATTR_SUBFLOWS, + MPTCP_PM_ATTR_TOKEN, + MPTCP_PM_ATTR_LOC_ID, + MPTCP_PM_ATTR_ADDR_REMOTE, + + __MPTCP_ATTR_AFTER_LAST +}; +#define MPTCP_PM_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1) + +enum mptcp_event_attr { + MPTCP_ATTR_UNSPEC, + MPTCP_ATTR_TOKEN, + MPTCP_ATTR_FAMILY, + MPTCP_ATTR_LOC_ID, + MPTCP_ATTR_REM_ID, + MPTCP_ATTR_SADDR4, + MPTCP_ATTR_SADDR6, + MPTCP_ATTR_DADDR4, + MPTCP_ATTR_DADDR6, + MPTCP_ATTR_SPORT, + MPTCP_ATTR_DPORT, + MPTCP_ATTR_BACKUP, + MPTCP_ATTR_ERROR, + MPTCP_ATTR_FLAGS, + MPTCP_ATTR_TIMEOUT, + MPTCP_ATTR_IF_IDX, + MPTCP_ATTR_RESET_REASON, + MPTCP_ATTR_RESET_FLAGS, + MPTCP_ATTR_SERVER_SIDE, + + __MPTCP_ATTR_MAX +}; +#define MPTCP_ATTR_MAX (__MPTCP_ATTR_MAX - 1) + +enum { + MPTCP_PM_CMD_UNSPEC, + MPTCP_PM_CMD_ADD_ADDR, + MPTCP_PM_CMD_DEL_ADDR, + MPTCP_PM_CMD_GET_ADDR, + MPTCP_PM_CMD_FLUSH_ADDRS, + MPTCP_PM_CMD_SET_LIMITS, + MPTCP_PM_CMD_GET_LIMITS, + MPTCP_PM_CMD_SET_FLAGS, + MPTCP_PM_CMD_ANNOUNCE, + MPTCP_PM_CMD_REMOVE, + MPTCP_PM_CMD_SUBFLOW_CREATE, + MPTCP_PM_CMD_SUBFLOW_DESTROY, + + __MPTCP_PM_CMD_AFTER_LAST +}; +#define MPTCP_PM_CMD_MAX (__MPTCP_PM_CMD_AFTER_LAST - 1) + +#endif /* _LINUX_MPTCP_PM_H */ diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h new file mode 100644 index 0000000..5e67a7e --- /dev/null +++ b/include/uapi/linux/neighbour.h @@ -0,0 +1,224 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_NEIGHBOUR_H +#define __LINUX_NEIGHBOUR_H + +#include <linux/types.h> +#include <linux/netlink.h> + +struct ndmsg { + __u8 ndm_family; + __u8 ndm_pad1; + __u16 ndm_pad2; + __s32 ndm_ifindex; + __u16 ndm_state; + __u8 ndm_flags; + __u8 ndm_type; +}; + +enum { + NDA_UNSPEC, + NDA_DST, + NDA_LLADDR, + NDA_CACHEINFO, + NDA_PROBES, + NDA_VLAN, + NDA_PORT, + NDA_VNI, + NDA_IFINDEX, + NDA_MASTER, + NDA_LINK_NETNSID, + NDA_SRC_VNI, + NDA_PROTOCOL, /* Originator of entry */ + NDA_NH_ID, + NDA_FDB_EXT_ATTRS, + NDA_FLAGS_EXT, + NDA_NDM_STATE_MASK, + NDA_NDM_FLAGS_MASK, + __NDA_MAX +}; + +#define NDA_MAX (__NDA_MAX - 1) + +/* + * Neighbor Cache Entry Flags + */ + +#define NTF_USE (1 << 0) +#define NTF_SELF (1 << 1) +#define NTF_MASTER (1 << 2) +#define NTF_PROXY (1 << 3) /* == ATF_PUBL */ +#define NTF_EXT_LEARNED (1 << 4) +#define NTF_OFFLOADED (1 << 5) +#define NTF_STICKY (1 << 6) +#define NTF_ROUTER (1 << 7) +/* Extended flags under NDA_FLAGS_EXT: */ +#define NTF_EXT_MANAGED (1 << 0) +#define NTF_EXT_LOCKED (1 << 1) + +/* + * Neighbor Cache Entry States. + */ + +#define NUD_INCOMPLETE 0x01 +#define NUD_REACHABLE 0x02 +#define NUD_STALE 0x04 +#define NUD_DELAY 0x08 +#define NUD_PROBE 0x10 +#define NUD_FAILED 0x20 + +/* Dummy states */ +#define NUD_NOARP 0x40 +#define NUD_PERMANENT 0x80 +#define NUD_NONE 0x00 + +/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change and make no + * address resolution or NUD. + * + * NUD_PERMANENT also cannot be deleted by garbage collectors. This holds true + * for dynamic entries with NTF_EXT_LEARNED flag as well. However, upon carrier + * down event, NUD_PERMANENT entries are not flushed whereas NTF_EXT_LEARNED + * flagged entries explicitly are (which is also consistent with the routing + * subsystem). + * + * When NTF_EXT_LEARNED is set for a bridge fdb entry the different cache entry + * states don't make sense and thus are ignored. Such entries don't age and + * can roam. + * + * NTF_EXT_MANAGED flagged neigbor entries are managed by the kernel on behalf + * of a user space control plane, and automatically refreshed so that (if + * possible) they remain in NUD_REACHABLE state. + * + * NTF_EXT_LOCKED flagged bridge FDB entries are entries generated by the + * bridge in response to a host trying to communicate via a locked bridge port + * with MAB enabled. Their purpose is to notify user space that a host requires + * authentication. + */ + +struct nda_cacheinfo { + __u32 ndm_confirmed; + __u32 ndm_used; + __u32 ndm_updated; + __u32 ndm_refcnt; +}; + +/***************************************************************** + * Neighbour tables specific messages. + * + * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the + * NLM_F_DUMP flag set. Every neighbour table configuration is + * spread over multiple messages to avoid running into message + * size limits on systems with many interfaces. The first message + * in the sequence transports all not device specific data such as + * statistics, configuration, and the default parameter set. + * This message is followed by 0..n messages carrying device + * specific parameter sets. + * Although the ordering should be sufficient, NDTA_NAME can be + * used to identify sequences. The initial message can be identified + * by checking for NDTA_CONFIG. The device specific messages do + * not contain this TLV but have NDTPA_IFINDEX set to the + * corresponding interface index. + * + * To change neighbour table attributes, send RTM_SETNEIGHTBL + * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3], + * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked + * otherwise. Device specific parameter sets can be changed by + * setting NDTPA_IFINDEX to the interface index of the corresponding + * device. + ****/ + +struct ndt_stats { + __u64 ndts_allocs; + __u64 ndts_destroys; + __u64 ndts_hash_grows; + __u64 ndts_res_failed; + __u64 ndts_lookups; + __u64 ndts_hits; + __u64 ndts_rcv_probes_mcast; + __u64 ndts_rcv_probes_ucast; + __u64 ndts_periodic_gc_runs; + __u64 ndts_forced_gc_runs; + __u64 ndts_table_fulls; +}; + +enum { + NDTPA_UNSPEC, + NDTPA_IFINDEX, /* u32, unchangeable */ + NDTPA_REFCNT, /* u32, read-only */ + NDTPA_REACHABLE_TIME, /* u64, read-only, msecs */ + NDTPA_BASE_REACHABLE_TIME, /* u64, msecs */ + NDTPA_RETRANS_TIME, /* u64, msecs */ + NDTPA_GC_STALETIME, /* u64, msecs */ + NDTPA_DELAY_PROBE_TIME, /* u64, msecs */ + NDTPA_QUEUE_LEN, /* u32 */ + NDTPA_APP_PROBES, /* u32 */ + NDTPA_UCAST_PROBES, /* u32 */ + NDTPA_MCAST_PROBES, /* u32 */ + NDTPA_ANYCAST_DELAY, /* u64, msecs */ + NDTPA_PROXY_DELAY, /* u64, msecs */ + NDTPA_PROXY_QLEN, /* u32 */ + NDTPA_LOCKTIME, /* u64, msecs */ + NDTPA_QUEUE_LENBYTES, /* u32 */ + NDTPA_MCAST_REPROBES, /* u32 */ + NDTPA_PAD, + NDTPA_INTERVAL_PROBE_TIME_MS, /* u64, msecs */ + __NDTPA_MAX +}; +#define NDTPA_MAX (__NDTPA_MAX - 1) + +struct ndtmsg { + __u8 ndtm_family; + __u8 ndtm_pad1; + __u16 ndtm_pad2; +}; + +struct ndt_config { + __u16 ndtc_key_len; + __u16 ndtc_entry_size; + __u32 ndtc_entries; + __u32 ndtc_last_flush; /* delta to now in msecs */ + __u32 ndtc_last_rand; /* delta to now in msecs */ + __u32 ndtc_hash_rnd; + __u32 ndtc_hash_mask; + __u32 ndtc_hash_chain_gc; + __u32 ndtc_proxy_qlen; +}; + +enum { + NDTA_UNSPEC, + NDTA_NAME, /* char *, unchangeable */ + NDTA_THRESH1, /* u32 */ + NDTA_THRESH2, /* u32 */ + NDTA_THRESH3, /* u32 */ + NDTA_CONFIG, /* struct ndt_config, read-only */ + NDTA_PARMS, /* nested TLV NDTPA_* */ + NDTA_STATS, /* struct ndt_stats, read-only */ + NDTA_GC_INTERVAL, /* u64, msecs */ + NDTA_PAD, + __NDTA_MAX +}; +#define NDTA_MAX (__NDTA_MAX - 1) + + /* FDB activity notification bits used in NFEA_ACTIVITY_NOTIFY: + * - FDB_NOTIFY_BIT - notify on activity/expire for any entry + * - FDB_NOTIFY_INACTIVE_BIT - mark as inactive to avoid multiple notifications + */ +enum { + FDB_NOTIFY_BIT = (1 << 0), + FDB_NOTIFY_INACTIVE_BIT = (1 << 1) +}; + +/* embedded into NDA_FDB_EXT_ATTRS: + * [NDA_FDB_EXT_ATTRS] = { + * [NFEA_ACTIVITY_NOTIFY] + * ... + * } + */ +enum { + NFEA_UNSPEC, + NFEA_ACTIVITY_NOTIFY, + NFEA_DONT_REFRESH, + __NFEA_MAX +}; +#define NFEA_MAX (__NFEA_MAX - 1) + +#endif diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h new file mode 100644 index 0000000..4754f70 --- /dev/null +++ b/include/uapi/linux/net.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * NET An implementation of the SOCKET network access protocol. + * This is the master header file for the Linux NET layer, + * or, in plain English: the networking handling part of the + * kernel. + * + * Version: @(#)net.h 1.0.3 05/25/93 + * + * Authors: Orest Zborowski, <obz@Kodak.COM> + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_NET_H +#define _LINUX_NET_H + +#include <linux/socket.h> +#include <asm/socket.h> + +#define NPROTO AF_MAX + +#define SYS_SOCKET 1 /* sys_socket(2) */ +#define SYS_BIND 2 /* sys_bind(2) */ +#define SYS_CONNECT 3 /* sys_connect(2) */ +#define SYS_LISTEN 4 /* sys_listen(2) */ +#define SYS_ACCEPT 5 /* sys_accept(2) */ +#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */ +#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */ +#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */ +#define SYS_SEND 9 /* sys_send(2) */ +#define SYS_RECV 10 /* sys_recv(2) */ +#define SYS_SENDTO 11 /* sys_sendto(2) */ +#define SYS_RECVFROM 12 /* sys_recvfrom(2) */ +#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */ +#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */ +#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ +#define SYS_SENDMSG 16 /* sys_sendmsg(2) */ +#define SYS_RECVMSG 17 /* sys_recvmsg(2) */ +#define SYS_ACCEPT4 18 /* sys_accept4(2) */ +#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */ +#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */ + +typedef enum { + SS_FREE = 0, /* not allocated */ + SS_UNCONNECTED, /* unconnected to any socket */ + SS_CONNECTING, /* in process of connecting */ + SS_CONNECTED, /* connected to socket */ + SS_DISCONNECTING /* in process of disconnecting */ +} socket_state; + +#define __SO_ACCEPTCON (1 << 16) /* performed a listen */ + +#endif /* _LINUX_NET_H */ diff --git a/include/uapi/linux/net_namespace.h b/include/uapi/linux/net_namespace.h new file mode 100644 index 0000000..fa81f1e --- /dev/null +++ b/include/uapi/linux/net_namespace.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2015 6WIND S.A. + * Author: Nicolas Dichtel <nicolas.dichtel@6wind.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#ifndef _LINUX_NET_NAMESPACE_H_ +#define _LINUX_NET_NAMESPACE_H_ + +/* Attributes of RTM_NEWNSID/RTM_GETNSID messages */ +enum { + NETNSA_NONE, +#define NETNSA_NSID_NOT_ASSIGNED -1 + NETNSA_NSID, + NETNSA_PID, + NETNSA_FD, + NETNSA_TARGET_NSID, + NETNSA_CURRENT_NSID, + __NETNSA_MAX, +}; + +#define NETNSA_MAX (__NETNSA_MAX - 1) + +#endif /* _LINUX_NET_NAMESPACE_H_ */ diff --git a/include/uapi/linux/netconf.h b/include/uapi/linux/netconf.h new file mode 100644 index 0000000..229e885 --- /dev/null +++ b/include/uapi/linux/netconf.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_NETCONF_H_ +#define _LINUX_NETCONF_H_ + +#include <linux/types.h> +#include <linux/netlink.h> + +struct netconfmsg { + __u8 ncm_family; +}; + +enum { + NETCONFA_UNSPEC, + NETCONFA_IFINDEX, + NETCONFA_FORWARDING, + NETCONFA_RP_FILTER, + NETCONFA_MC_FORWARDING, + NETCONFA_PROXY_NEIGH, + NETCONFA_IGNORE_ROUTES_WITH_LINKDOWN, + NETCONFA_INPUT, + NETCONFA_BC_FORWARDING, + __NETCONFA_MAX +}; +#define NETCONFA_MAX (__NETCONFA_MAX - 1) +#define NETCONFA_ALL -1 + +#define NETCONFA_IFINDEX_ALL -1 +#define NETCONFA_IFINDEX_DEFAULT -2 + +#endif /* _LINUX_NETCONF_H_ */ diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h new file mode 100644 index 0000000..86d961c --- /dev/null +++ b/include/uapi/linux/netdevice.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the Interfaces handler. + * + * Version: @(#)dev.h 1.0.10 08/12/93 + * + * Authors: Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Corey Minyard <wf-rch!minyard@relay.EU.net> + * Donald J. Becker, <becker@cesdis.gsfc.nasa.gov> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Bjorn Ekwall. <bj0rn@blox.se> + * Pekka Riikonen <priikone@poseidon.pspt.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Moved to /usr/include/linux for NET3 + */ +#ifndef _LINUX_NETDEVICE_H +#define _LINUX_NETDEVICE_H + +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_packet.h> +#include <linux/if_link.h> + + +#define MAX_ADDR_LEN 32 /* Largest hardware address length */ + +/* Initial net device group. All devices belong to group 0 by default. */ +#define INIT_NETDEV_GROUP 0 + + +/* interface name assignment types (sysfs name_assign_type attribute) */ +#define NET_NAME_UNKNOWN 0 /* unknown origin (not exposed to userspace) */ +#define NET_NAME_ENUM 1 /* enumerated by kernel */ +#define NET_NAME_PREDICTABLE 2 /* predictably named by the kernel */ +#define NET_NAME_USER 3 /* provided by user-space */ +#define NET_NAME_RENAMED 4 /* renamed by user-space */ + +/* Media selection options. */ +enum { + IF_PORT_UNKNOWN = 0, + IF_PORT_10BASE2, + IF_PORT_10BASET, + IF_PORT_AUI, + IF_PORT_100BASET, + IF_PORT_100BASETX, + IF_PORT_100BASEFX +}; + +/* hardware address assignment types */ +#define NET_ADDR_PERM 0 /* address is permanent (default) */ +#define NET_ADDR_RANDOM 1 /* address is generated randomly */ +#define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ + +#endif /* _LINUX_NETDEVICE_H */ diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h new file mode 100644 index 0000000..30c045b --- /dev/null +++ b/include/uapi/linux/netfilter.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_NETFILTER_H +#define __LINUX_NETFILTER_H + +#include <linux/types.h> + +#include <linux/in.h> +#include <linux/in6.h> + +/* Responses from hook functions. */ +#define NF_DROP 0 +#define NF_ACCEPT 1 +#define NF_STOLEN 2 +#define NF_QUEUE 3 +#define NF_REPEAT 4 +#define NF_STOP 5 /* Deprecated, for userspace nf_queue compatibility. */ +#define NF_MAX_VERDICT NF_STOP + +/* we overload the higher bits for encoding auxiliary data such as the queue + * number or errno values. Not nice, but better than additional function + * arguments. */ +#define NF_VERDICT_MASK 0x000000ff + +/* extra verdict flags have mask 0x0000ff00 */ +#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 + +/* queue number (NF_QUEUE) or errno (NF_DROP) */ +#define NF_VERDICT_QMASK 0xffff0000 +#define NF_VERDICT_QBITS 16 + +#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) + +#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) + +/* only for userspace compatibility */ + +/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ +#define NF_VERDICT_BITS 16 + +enum nf_inet_hooks { + NF_INET_PRE_ROUTING, + NF_INET_LOCAL_IN, + NF_INET_FORWARD, + NF_INET_LOCAL_OUT, + NF_INET_POST_ROUTING, + NF_INET_NUMHOOKS, + NF_INET_INGRESS = NF_INET_NUMHOOKS, +}; + +enum nf_dev_hooks { + NF_NETDEV_INGRESS, + NF_NETDEV_EGRESS, + NF_NETDEV_NUMHOOKS +}; + +enum { + NFPROTO_UNSPEC = 0, + NFPROTO_INET = 1, + NFPROTO_IPV4 = 2, + NFPROTO_ARP = 3, + NFPROTO_NETDEV = 5, + NFPROTO_BRIDGE = 7, + NFPROTO_IPV6 = 10, + NFPROTO_DECNET = 12, + NFPROTO_NUMPROTO, +}; + +union nf_inet_addr { + __u32 all[4]; + __be32 ip; + __be32 ip6[4]; + struct in_addr in; + struct in6_addr in6; +}; + +#endif /* __LINUX_NETFILTER_H */ diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h new file mode 100644 index 0000000..f9725c3 --- /dev/null +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -0,0 +1,312 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu> + * Patrick Schaaf <bof@bof.de> + * Martin Josefsson <gandalf@wlug.westbo.se> + * Copyright (C) 2003-2011 Jozsef Kadlecsik <kadlec@netfilter.org> + */ +#ifndef _IP_SET_H +#define _IP_SET_H + +#include <linux/types.h> + +/* The protocol versions */ +#define IPSET_PROTOCOL 7 +#define IPSET_PROTOCOL_MIN 6 + +/* The max length of strings including NUL: set and type identifiers */ +#define IPSET_MAXNAMELEN 32 + +/* The maximum permissible comment length we will accept over netlink */ +#define IPSET_MAX_COMMENT_SIZE 255 + +/* Message types and commands */ +enum ipset_cmd { + IPSET_CMD_NONE, + IPSET_CMD_PROTOCOL, /* 1: Return protocol version */ + IPSET_CMD_CREATE, /* 2: Create a new (empty) set */ + IPSET_CMD_DESTROY, /* 3: Destroy a (empty) set */ + IPSET_CMD_FLUSH, /* 4: Remove all elements from a set */ + IPSET_CMD_RENAME, /* 5: Rename a set */ + IPSET_CMD_SWAP, /* 6: Swap two sets */ + IPSET_CMD_LIST, /* 7: List sets */ + IPSET_CMD_SAVE, /* 8: Save sets */ + IPSET_CMD_ADD, /* 9: Add an element to a set */ + IPSET_CMD_DEL, /* 10: Delete an element from a set */ + IPSET_CMD_TEST, /* 11: Test an element in a set */ + IPSET_CMD_HEADER, /* 12: Get set header data only */ + IPSET_CMD_TYPE, /* 13: Get set type */ + IPSET_CMD_GET_BYNAME, /* 14: Get set index by name */ + IPSET_CMD_GET_BYINDEX, /* 15: Get set name by index */ + IPSET_MSG_MAX, /* Netlink message commands */ + + /* Commands in userspace: */ + IPSET_CMD_RESTORE = IPSET_MSG_MAX, /* 16: Enter restore mode */ + IPSET_CMD_HELP, /* 17: Get help */ + IPSET_CMD_VERSION, /* 18: Get program version */ + IPSET_CMD_QUIT, /* 19: Quit from interactive mode */ + + IPSET_CMD_MAX, + + IPSET_CMD_COMMIT = IPSET_CMD_MAX, /* 20: Commit buffered commands */ +}; + +/* Attributes at command level */ +enum { + IPSET_ATTR_UNSPEC, + IPSET_ATTR_PROTOCOL, /* 1: Protocol version */ + IPSET_ATTR_SETNAME, /* 2: Name of the set */ + IPSET_ATTR_TYPENAME, /* 3: Typename */ + IPSET_ATTR_SETNAME2 = IPSET_ATTR_TYPENAME, /* Setname at rename/swap */ + IPSET_ATTR_REVISION, /* 4: Settype revision */ + IPSET_ATTR_FAMILY, /* 5: Settype family */ + IPSET_ATTR_FLAGS, /* 6: Flags at command level */ + IPSET_ATTR_DATA, /* 7: Nested attributes */ + IPSET_ATTR_ADT, /* 8: Multiple data containers */ + IPSET_ATTR_LINENO, /* 9: Restore lineno */ + IPSET_ATTR_PROTOCOL_MIN, /* 10: Minimal supported version number */ + IPSET_ATTR_REVISION_MIN = IPSET_ATTR_PROTOCOL_MIN, /* type rev min */ + IPSET_ATTR_INDEX, /* 11: Kernel index of set */ + __IPSET_ATTR_CMD_MAX, +}; +#define IPSET_ATTR_CMD_MAX (__IPSET_ATTR_CMD_MAX - 1) + +/* CADT specific attributes */ +enum { + IPSET_ATTR_IP = IPSET_ATTR_UNSPEC + 1, + IPSET_ATTR_IP_FROM = IPSET_ATTR_IP, + IPSET_ATTR_IP_TO, /* 2 */ + IPSET_ATTR_CIDR, /* 3 */ + IPSET_ATTR_PORT, /* 4 */ + IPSET_ATTR_PORT_FROM = IPSET_ATTR_PORT, + IPSET_ATTR_PORT_TO, /* 5 */ + IPSET_ATTR_TIMEOUT, /* 6 */ + IPSET_ATTR_PROTO, /* 7 */ + IPSET_ATTR_CADT_FLAGS, /* 8 */ + IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ + IPSET_ATTR_MARK, /* 10 */ + IPSET_ATTR_MARKMASK, /* 11 */ + IPSET_ATTR_BITMASK, /* 12 */ + /* Reserve empty slots */ + IPSET_ATTR_CADT_MAX = 16, + /* Create-only specific attributes */ + IPSET_ATTR_INITVAL, /* was unused IPSET_ATTR_GC */ + IPSET_ATTR_HASHSIZE, + IPSET_ATTR_MAXELEM, + IPSET_ATTR_NETMASK, + IPSET_ATTR_BUCKETSIZE, /* was unused IPSET_ATTR_PROBES */ + IPSET_ATTR_RESIZE, + IPSET_ATTR_SIZE, + /* Kernel-only */ + IPSET_ATTR_ELEMENTS, + IPSET_ATTR_REFERENCES, + IPSET_ATTR_MEMSIZE, + + __IPSET_ATTR_CREATE_MAX, +}; +#define IPSET_ATTR_CREATE_MAX (__IPSET_ATTR_CREATE_MAX - 1) + +/* ADT specific attributes */ +enum { + IPSET_ATTR_ETHER = IPSET_ATTR_CADT_MAX + 1, + IPSET_ATTR_NAME, + IPSET_ATTR_NAMEREF, + IPSET_ATTR_IP2, + IPSET_ATTR_CIDR2, + IPSET_ATTR_IP2_TO, + IPSET_ATTR_IFACE, + IPSET_ATTR_BYTES, + IPSET_ATTR_PACKETS, + IPSET_ATTR_COMMENT, + IPSET_ATTR_SKBMARK, + IPSET_ATTR_SKBPRIO, + IPSET_ATTR_SKBQUEUE, + IPSET_ATTR_PAD, + __IPSET_ATTR_ADT_MAX, +}; +#define IPSET_ATTR_ADT_MAX (__IPSET_ATTR_ADT_MAX - 1) + +/* IP specific attributes */ +enum { + IPSET_ATTR_IPADDR_IPV4 = IPSET_ATTR_UNSPEC + 1, + IPSET_ATTR_IPADDR_IPV6, + __IPSET_ATTR_IPADDR_MAX, +}; +#define IPSET_ATTR_IPADDR_MAX (__IPSET_ATTR_IPADDR_MAX - 1) + +/* Error codes */ +enum ipset_errno { + IPSET_ERR_PRIVATE = 4096, + IPSET_ERR_PROTOCOL, + IPSET_ERR_FIND_TYPE, + IPSET_ERR_MAX_SETS, + IPSET_ERR_BUSY, + IPSET_ERR_EXIST_SETNAME2, + IPSET_ERR_TYPE_MISMATCH, + IPSET_ERR_EXIST, + IPSET_ERR_INVALID_CIDR, + IPSET_ERR_INVALID_NETMASK, + IPSET_ERR_INVALID_FAMILY, + IPSET_ERR_TIMEOUT, + IPSET_ERR_REFERENCED, + IPSET_ERR_IPADDR_IPV4, + IPSET_ERR_IPADDR_IPV6, + IPSET_ERR_COUNTER, + IPSET_ERR_COMMENT, + IPSET_ERR_INVALID_MARKMASK, + IPSET_ERR_SKBINFO, + IPSET_ERR_BITMASK_NETMASK_EXCL, + + /* Type specific error codes */ + IPSET_ERR_TYPE_SPECIFIC = 4352, +}; + +/* Flags at command level or match/target flags, lower half of cmdattrs*/ +enum ipset_cmd_flags { + IPSET_FLAG_BIT_EXIST = 0, + IPSET_FLAG_EXIST = (1 << IPSET_FLAG_BIT_EXIST), + IPSET_FLAG_BIT_LIST_SETNAME = 1, + IPSET_FLAG_LIST_SETNAME = (1 << IPSET_FLAG_BIT_LIST_SETNAME), + IPSET_FLAG_BIT_LIST_HEADER = 2, + IPSET_FLAG_LIST_HEADER = (1 << IPSET_FLAG_BIT_LIST_HEADER), + IPSET_FLAG_BIT_SKIP_COUNTER_UPDATE = 3, + IPSET_FLAG_SKIP_COUNTER_UPDATE = + (1 << IPSET_FLAG_BIT_SKIP_COUNTER_UPDATE), + IPSET_FLAG_BIT_SKIP_SUBCOUNTER_UPDATE = 4, + IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE = + (1 << IPSET_FLAG_BIT_SKIP_SUBCOUNTER_UPDATE), + IPSET_FLAG_BIT_MATCH_COUNTERS = 5, + IPSET_FLAG_MATCH_COUNTERS = (1 << IPSET_FLAG_BIT_MATCH_COUNTERS), + IPSET_FLAG_BIT_RETURN_NOMATCH = 7, + IPSET_FLAG_RETURN_NOMATCH = (1 << IPSET_FLAG_BIT_RETURN_NOMATCH), + IPSET_FLAG_BIT_MAP_SKBMARK = 8, + IPSET_FLAG_MAP_SKBMARK = (1 << IPSET_FLAG_BIT_MAP_SKBMARK), + IPSET_FLAG_BIT_MAP_SKBPRIO = 9, + IPSET_FLAG_MAP_SKBPRIO = (1 << IPSET_FLAG_BIT_MAP_SKBPRIO), + IPSET_FLAG_BIT_MAP_SKBQUEUE = 10, + IPSET_FLAG_MAP_SKBQUEUE = (1 << IPSET_FLAG_BIT_MAP_SKBQUEUE), + IPSET_FLAG_CMD_MAX = 15, +}; + +/* Flags at CADT attribute level, upper half of cmdattrs */ +enum ipset_cadt_flags { + IPSET_FLAG_BIT_BEFORE = 0, + IPSET_FLAG_BEFORE = (1 << IPSET_FLAG_BIT_BEFORE), + IPSET_FLAG_BIT_PHYSDEV = 1, + IPSET_FLAG_PHYSDEV = (1 << IPSET_FLAG_BIT_PHYSDEV), + IPSET_FLAG_BIT_NOMATCH = 2, + IPSET_FLAG_NOMATCH = (1 << IPSET_FLAG_BIT_NOMATCH), + IPSET_FLAG_BIT_WITH_COUNTERS = 3, + IPSET_FLAG_WITH_COUNTERS = (1 << IPSET_FLAG_BIT_WITH_COUNTERS), + IPSET_FLAG_BIT_WITH_COMMENT = 4, + IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT), + IPSET_FLAG_BIT_WITH_FORCEADD = 5, + IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD), + IPSET_FLAG_BIT_WITH_SKBINFO = 6, + IPSET_FLAG_WITH_SKBINFO = (1 << IPSET_FLAG_BIT_WITH_SKBINFO), + IPSET_FLAG_BIT_IFACE_WILDCARD = 7, + IPSET_FLAG_IFACE_WILDCARD = (1 << IPSET_FLAG_BIT_IFACE_WILDCARD), + IPSET_FLAG_CADT_MAX = 15, +}; + +/* The flag bits which correspond to the non-extension create flags */ +enum ipset_create_flags { + IPSET_CREATE_FLAG_BIT_FORCEADD = 0, + IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_BUCKETSIZE = 1, + IPSET_CREATE_FLAG_BUCKETSIZE = (1 << IPSET_CREATE_FLAG_BIT_BUCKETSIZE), + IPSET_CREATE_FLAG_BIT_MAX = 7, +}; + +/* Commands with settype-specific attributes */ +enum ipset_adt { + IPSET_ADD, + IPSET_DEL, + IPSET_TEST, + IPSET_ADT_MAX, + IPSET_CREATE = IPSET_ADT_MAX, + IPSET_CADT_MAX, +}; + +/* Sets are identified by an index in kernel space. Tweak with ip_set_id_t + * and IPSET_INVALID_ID if you want to increase the max number of sets. + * Also, IPSET_ATTR_INDEX must be changed. + */ +typedef __u16 ip_set_id_t; + +#define IPSET_INVALID_ID 65535 + +enum ip_set_dim { + IPSET_DIM_ZERO = 0, + IPSET_DIM_ONE, + IPSET_DIM_TWO, + IPSET_DIM_THREE, + /* Max dimension in elements. + * If changed, new revision of iptables match/target is required. + */ + IPSET_DIM_MAX = 6, + /* Backward compatibility: set match revision 2 */ + IPSET_BIT_RETURN_NOMATCH = 7, +}; + +/* Option flags for kernel operations */ +enum ip_set_kopt { + IPSET_INV_MATCH = (1 << IPSET_DIM_ZERO), + IPSET_DIM_ONE_SRC = (1 << IPSET_DIM_ONE), + IPSET_DIM_TWO_SRC = (1 << IPSET_DIM_TWO), + IPSET_DIM_THREE_SRC = (1 << IPSET_DIM_THREE), + IPSET_RETURN_NOMATCH = (1 << IPSET_BIT_RETURN_NOMATCH), +}; + +enum { + IPSET_COUNTER_NONE = 0, + IPSET_COUNTER_EQ, + IPSET_COUNTER_NE, + IPSET_COUNTER_LT, + IPSET_COUNTER_GT, +}; + +/* Backward compatibility for set match v3 */ +struct ip_set_counter_match0 { + __u8 op; + __u64 value; +}; + +struct ip_set_counter_match { + __aligned_u64 value; + __u8 op; +}; + +/* Interface to iptables/ip6tables */ + +#define SO_IP_SET 83 + +union ip_set_name_index { + char name[IPSET_MAXNAMELEN]; + ip_set_id_t index; +}; + +#define IP_SET_OP_GET_BYNAME 0x00000006 /* Get set index by name */ +struct ip_set_req_get_set { + unsigned int op; + unsigned int version; + union ip_set_name_index set; +}; + +#define IP_SET_OP_GET_BYINDEX 0x00000007 /* Get set name by index */ +/* Uses ip_set_req_get_set */ + +#define IP_SET_OP_GET_FNAME 0x00000008 /* Get set index and family */ +struct ip_set_req_get_set_family { + unsigned int op; + unsigned int version; + unsigned int family; + union ip_set_name_index set; +}; + +#define IP_SET_OP_VERSION 0x00000100 /* Ask kernel version */ +struct ip_set_req_version { + unsigned int op; + unsigned int version; +}; + +#endif /* _IP_SET_H */ diff --git a/include/uapi/linux/netfilter/x_tables.h b/include/uapi/linux/netfilter/x_tables.h new file mode 100644 index 0000000..15e4a9c --- /dev/null +++ b/include/uapi/linux/netfilter/x_tables.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _X_TABLES_H +#define _X_TABLES_H +#include <linux/const.h> +#include <linux/types.h> + +#define XT_FUNCTION_MAXNAMELEN 30 +#define XT_EXTENSION_MAXNAMELEN 29 +#define XT_TABLE_MAXNAMELEN 32 + +struct xt_entry_match { + union { + struct { + __u16 match_size; + + /* Used by userspace */ + char name[XT_EXTENSION_MAXNAMELEN]; + __u8 revision; + } user; + struct { + __u16 match_size; + + /* Used inside the kernel */ + struct xt_match *match; + } kernel; + + /* Total length */ + __u16 match_size; + } u; + + unsigned char data[]; +}; + +struct xt_entry_target { + union { + struct { + __u16 target_size; + + /* Used by userspace */ + char name[XT_EXTENSION_MAXNAMELEN]; + __u8 revision; + } user; + struct { + __u16 target_size; + + /* Used inside the kernel */ + struct xt_target *target; + } kernel; + + /* Total length */ + __u16 target_size; + } u; + + unsigned char data[0]; +}; + +#define XT_TARGET_INIT(__name, __size) \ +{ \ + .target.u.user = { \ + .target_size = XT_ALIGN(__size), \ + .name = __name, \ + }, \ +} + +struct xt_standard_target { + struct xt_entry_target target; + int verdict; +}; + +struct xt_error_target { + struct xt_entry_target target; + char errorname[XT_FUNCTION_MAXNAMELEN]; +}; + +/* The argument to IPT_SO_GET_REVISION_*. Returns highest revision + * kernel supports, if >= revision. */ +struct xt_get_revision { + char name[XT_EXTENSION_MAXNAMELEN]; + __u8 revision; +}; + +/* CONTINUE verdict for targets */ +#define XT_CONTINUE 0xFFFFFFFF + +/* For standard target */ +#define XT_RETURN (-NF_REPEAT - 1) + +/* this is a dummy structure to find out the alignment requirement for a struct + * containing all the fundamental data types that are used in ipt_entry, + * ip6t_entry and arpt_entry. This sucks, and it is a hack. It will be my + * personal pleasure to remove it -HW + */ +struct _xt_align { + __u8 u8; + __u16 u16; + __u32 u32; + __u64 u64; +}; + +#define XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _xt_align)) + +/* Standard return verdict, or do jump. */ +#define XT_STANDARD_TARGET "" +/* Error verdict. */ +#define XT_ERROR_TARGET "ERROR" + +#define SET_COUNTER(c,b,p) do { (c).bcnt = (b); (c).pcnt = (p); } while(0) +#define ADD_COUNTER(c,b,p) do { (c).bcnt += (b); (c).pcnt += (p); } while(0) + +struct xt_counters { + __u64 pcnt, bcnt; /* Packet and byte counters */ +}; + +/* The argument to IPT_SO_ADD_COUNTERS. */ +struct xt_counters_info { + /* Which table. */ + char name[XT_TABLE_MAXNAMELEN]; + + unsigned int num_counters; + + /* The counters (actually `number' of these). */ + struct xt_counters counters[]; +}; + +#define XT_INV_PROTO 0x40 /* Invert the sense of PROTO. */ + +/* fn returns 0 to continue iteration */ +#define XT_MATCH_ITERATE(type, e, fn, args...) \ +({ \ + unsigned int __i; \ + int __ret = 0; \ + struct xt_entry_match *__m; \ + \ + for (__i = sizeof(type); \ + __i < (e)->target_offset; \ + __i += __m->u.match_size) { \ + __m = (void *)e + __i; \ + \ + __ret = fn(__m , ## args); \ + if (__ret != 0) \ + break; \ + } \ + __ret; \ +}) + +/* fn returns 0 to continue iteration */ +#define XT_ENTRY_ITERATE_CONTINUE(type, entries, size, n, fn, args...) \ +({ \ + unsigned int __i, __n; \ + int __ret = 0; \ + type *__entry; \ + \ + for (__i = 0, __n = 0; __i < (size); \ + __i += __entry->next_offset, __n++) { \ + __entry = (void *)(entries) + __i; \ + if (__n < n) \ + continue; \ + \ + __ret = fn(__entry , ## args); \ + if (__ret != 0) \ + break; \ + } \ + __ret; \ +}) + +/* fn returns 0 to continue iteration */ +#define XT_ENTRY_ITERATE(type, entries, size, fn, args...) \ + XT_ENTRY_ITERATE_CONTINUE(type, entries, size, 0, fn, args) + + +/* pos is normally a struct ipt_entry/ip6t_entry/etc. */ +#define xt_entry_foreach(pos, ehead, esize) \ + for ((pos) = (typeof(pos))(ehead); \ + (pos) < (typeof(pos))((char *)(ehead) + (esize)); \ + (pos) = (typeof(pos))((char *)(pos) + (pos)->next_offset)) + +/* can only be xt_entry_match, so no use of typeof here */ +#define xt_ematch_foreach(pos, entry) \ + for ((pos) = (struct xt_entry_match *)entry->elems; \ + (pos) < (struct xt_entry_match *)((char *)(entry) + \ + (entry)->target_offset); \ + (pos) = (struct xt_entry_match *)((char *)(pos) + \ + (pos)->u.match_size)) + + +#endif /* _X_TABLES_H */ diff --git a/include/uapi/linux/netfilter/xt_set.h b/include/uapi/linux/netfilter/xt_set.h new file mode 100644 index 0000000..8c1ca66 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_set.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _XT_SET_H +#define _XT_SET_H + +#include <linux/types.h> +#include <linux/netfilter/ipset/ip_set.h> + +/* Revision 0 interface: backward compatible with netfilter/iptables */ + +/* + * Option flags for kernel operations (xt_set_info_v0) + */ +#define IPSET_SRC 0x01 /* Source match/add */ +#define IPSET_DST 0x02 /* Destination match/add */ +#define IPSET_MATCH_INV 0x04 /* Inverse matching */ + +struct xt_set_info_v0 { + ip_set_id_t index; + union { + __u32 flags[IPSET_DIM_MAX + 1]; + struct { + __u32 __flags[IPSET_DIM_MAX]; + __u8 dim; + __u8 flags; + } compat; + } u; +}; + +/* match and target infos */ +struct xt_set_info_match_v0 { + struct xt_set_info_v0 match_set; +}; + +struct xt_set_info_target_v0 { + struct xt_set_info_v0 add_set; + struct xt_set_info_v0 del_set; +}; + +/* Revision 1 match and target */ + +struct xt_set_info { + ip_set_id_t index; + __u8 dim; + __u8 flags; +}; + +/* match and target infos */ +struct xt_set_info_match_v1 { + struct xt_set_info match_set; +}; + +struct xt_set_info_target_v1 { + struct xt_set_info add_set; + struct xt_set_info del_set; +}; + +/* Revision 2 target */ + +struct xt_set_info_target_v2 { + struct xt_set_info add_set; + struct xt_set_info del_set; + __u32 flags; + __u32 timeout; +}; + +/* Revision 3 match */ + +struct xt_set_info_match_v3 { + struct xt_set_info match_set; + struct ip_set_counter_match0 packets; + struct ip_set_counter_match0 bytes; + __u32 flags; +}; + +/* Revision 3 target */ + +struct xt_set_info_target_v3 { + struct xt_set_info add_set; + struct xt_set_info del_set; + struct xt_set_info map_set; + __u32 flags; + __u32 timeout; +}; + +/* Revision 4 match */ + +struct xt_set_info_match_v4 { + struct xt_set_info match_set; + struct ip_set_counter_match packets; + struct ip_set_counter_match bytes; + __u32 flags; +}; + +#endif /*_XT_SET_H*/ diff --git a/include/uapi/linux/netfilter/xt_tcpudp.h b/include/uapi/linux/netfilter/xt_tcpudp.h new file mode 100644 index 0000000..658c169 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_tcpudp.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _XT_TCPUDP_H +#define _XT_TCPUDP_H + +#include <linux/types.h> + +/* TCP matching stuff */ +struct xt_tcp { + __u16 spts[2]; /* Source port range. */ + __u16 dpts[2]; /* Destination port range. */ + __u8 option; /* TCP Option iff non-zero*/ + __u8 flg_mask; /* TCP flags mask byte */ + __u8 flg_cmp; /* TCP flags compare byte */ + __u8 invflags; /* Inverse flags */ +}; + +/* Values for "inv" field in struct ipt_tcp. */ +#define XT_TCP_INV_SRCPT 0x01 /* Invert the sense of source ports. */ +#define XT_TCP_INV_DSTPT 0x02 /* Invert the sense of dest ports. */ +#define XT_TCP_INV_FLAGS 0x04 /* Invert the sense of TCP flags. */ +#define XT_TCP_INV_OPTION 0x08 /* Invert the sense of option test. */ +#define XT_TCP_INV_MASK 0x0F /* All possible flags. */ + +/* UDP matching stuff */ +struct xt_udp { + __u16 spts[2]; /* Source port range. */ + __u16 dpts[2]; /* Destination port range. */ + __u8 invflags; /* Inverse flags */ +}; + +/* Values for "invflags" field in struct ipt_udp. */ +#define XT_UDP_INV_SRCPT 0x01 /* Invert the sense of source ports. */ +#define XT_UDP_INV_DSTPT 0x02 /* Invert the sense of dest ports. */ +#define XT_UDP_INV_MASK 0x03 /* All possible flags. */ + + +#endif diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h new file mode 100644 index 0000000..96979e3 --- /dev/null +++ b/include/uapi/linux/netfilter_ipv4.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* IPv4-specific defines for netfilter. + * (C)1998 Rusty Russell -- This code is GPL. + */ +#ifndef __LINUX_IP_NETFILTER_H +#define __LINUX_IP_NETFILTER_H + + +#include <linux/netfilter.h> + +/* only for userspace compatibility */ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + +/* IP Hooks */ +/* After promisc drops, checksum checks. */ +#define NF_IP_PRE_ROUTING 0 +/* If the packet is destined for this box. */ +#define NF_IP_LOCAL_IN 1 +/* If the packet is destined for another interface. */ +#define NF_IP_FORWARD 2 +/* Packets coming from a local process. */ +#define NF_IP_LOCAL_OUT 3 +/* Packets about to hit the wire. */ +#define NF_IP_POST_ROUTING 4 +#define NF_IP_NUMHOOKS 5 + +enum nf_ip_hook_priorities { + NF_IP_PRI_FIRST = INT_MIN, + NF_IP_PRI_RAW_BEFORE_DEFRAG = -450, + NF_IP_PRI_CONNTRACK_DEFRAG = -400, + NF_IP_PRI_RAW = -300, + NF_IP_PRI_SELINUX_FIRST = -225, + NF_IP_PRI_CONNTRACK = -200, + NF_IP_PRI_MANGLE = -150, + NF_IP_PRI_NAT_DST = -100, + NF_IP_PRI_FILTER = 0, + NF_IP_PRI_SECURITY = 50, + NF_IP_PRI_NAT_SRC = 100, + NF_IP_PRI_SELINUX_LAST = 225, + NF_IP_PRI_CONNTRACK_HELPER = 300, + NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, + NF_IP_PRI_LAST = INT_MAX, +}; + +/* Arguments for setsockopt SOL_IP: */ +/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */ +/* 2.2 firewalling (+ masq) went from 64 through 76 */ +/* 2.4 firewalling went 64 through 67. */ +#define SO_ORIGINAL_DST 80 + + +#endif /* __LINUX_IP_NETFILTER_H */ diff --git a/include/uapi/linux/netfilter_ipv4/ip_tables.h b/include/uapi/linux/netfilter_ipv4/ip_tables.h new file mode 100644 index 0000000..52024cb --- /dev/null +++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * 25-Jul-1998 Major changes to allow for ip chain table + * + * 3-Jan-2000 Named tables to allow packet selection for different uses. + */ + +/* + * Format of an IP firewall descriptor + * + * src, dst, src_mask, dst_mask are always stored in network byte order. + * flags are stored in host byte order (of course). + * Port numbers are stored in HOST byte order. + */ + +#ifndef _IPTABLES_H +#define _IPTABLES_H + +#include <linux/types.h> + +#include <linux/if.h> +#include <linux/netfilter_ipv4.h> + +#include <linux/netfilter/x_tables.h> + +#define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN +#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN +#define ipt_match xt_match +#define ipt_target xt_target +#define ipt_table xt_table +#define ipt_get_revision xt_get_revision +#define ipt_entry_match xt_entry_match +#define ipt_entry_target xt_entry_target +#define ipt_standard_target xt_standard_target +#define ipt_error_target xt_error_target +#define ipt_counters xt_counters +#define IPT_CONTINUE XT_CONTINUE +#define IPT_RETURN XT_RETURN + +/* This group is older than old (iptables < v1.4.0-rc1~89) */ +#include <linux/netfilter/xt_tcpudp.h> +#define ipt_udp xt_udp +#define ipt_tcp xt_tcp +#define IPT_TCP_INV_SRCPT XT_TCP_INV_SRCPT +#define IPT_TCP_INV_DSTPT XT_TCP_INV_DSTPT +#define IPT_TCP_INV_FLAGS XT_TCP_INV_FLAGS +#define IPT_TCP_INV_OPTION XT_TCP_INV_OPTION +#define IPT_TCP_INV_MASK XT_TCP_INV_MASK +#define IPT_UDP_INV_SRCPT XT_UDP_INV_SRCPT +#define IPT_UDP_INV_DSTPT XT_UDP_INV_DSTPT +#define IPT_UDP_INV_MASK XT_UDP_INV_MASK + +/* The argument to IPT_SO_ADD_COUNTERS. */ +#define ipt_counters_info xt_counters_info +/* Standard return verdict, or do jump. */ +#define IPT_STANDARD_TARGET XT_STANDARD_TARGET +/* Error verdict. */ +#define IPT_ERROR_TARGET XT_ERROR_TARGET + +/* fn returns 0 to continue iteration */ +#define IPT_MATCH_ITERATE(e, fn, args...) \ + XT_MATCH_ITERATE(struct ipt_entry, e, fn, ## args) + +/* fn returns 0 to continue iteration */ +#define IPT_ENTRY_ITERATE(entries, size, fn, args...) \ + XT_ENTRY_ITERATE(struct ipt_entry, entries, size, fn, ## args) + +/* Yes, Virginia, you have to zero the padding. */ +struct ipt_ip { + /* Source and destination IP addr */ + struct in_addr src, dst; + /* Mask for src and dest IP addr */ + struct in_addr smsk, dmsk; + char iniface[IFNAMSIZ], outiface[IFNAMSIZ]; + unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; + + /* Protocol, 0 = ANY */ + __u16 proto; + + /* Flags word */ + __u8 flags; + /* Inverse flags */ + __u8 invflags; +}; + +/* Values for "flag" field in struct ipt_ip (general ip structure). */ +#define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */ +#define IPT_F_GOTO 0x02 /* Set if jump is a goto */ +#define IPT_F_MASK 0x03 /* All possible flag bits mask. */ + +/* Values for "inv" field in struct ipt_ip. */ +#define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */ +#define IPT_INV_VIA_OUT 0x02 /* Invert the sense of OUT IFACE */ +#define IPT_INV_TOS 0x04 /* Invert the sense of TOS. */ +#define IPT_INV_SRCIP 0x08 /* Invert the sense of SRC IP. */ +#define IPT_INV_DSTIP 0x10 /* Invert the sense of DST OP. */ +#define IPT_INV_FRAG 0x20 /* Invert the sense of FRAG. */ +#define IPT_INV_PROTO XT_INV_PROTO +#define IPT_INV_MASK 0x7F /* All possible flag bits mask. */ + +/* This structure defines each of the firewall rules. Consists of 3 + parts which are 1) general IP header stuff 2) match specific + stuff 3) the target to perform if the rule matches */ +struct ipt_entry { + struct ipt_ip ip; + + /* Mark with fields that we care about. */ + unsigned int nfcache; + + /* Size of ipt_entry + matches */ + __u16 target_offset; + /* Size of ipt_entry + matches + target */ + __u16 next_offset; + + /* Back pointer */ + unsigned int comefrom; + + /* Packet and byte counters. */ + struct xt_counters counters; + + /* The matches (if any), then the target. */ + unsigned char elems[]; +}; + +/* + * New IP firewall options for [gs]etsockopt at the RAW IP level. + * Unlike BSD Linux inherits IP options so you don't have to use a raw + * socket for this. Instead we check rights in the calls. + * + * ATTENTION: check linux/in.h before adding new number here. + */ +#define IPT_BASE_CTL 64 + +#define IPT_SO_SET_REPLACE (IPT_BASE_CTL) +#define IPT_SO_SET_ADD_COUNTERS (IPT_BASE_CTL + 1) +#define IPT_SO_SET_MAX IPT_SO_SET_ADD_COUNTERS + +#define IPT_SO_GET_INFO (IPT_BASE_CTL) +#define IPT_SO_GET_ENTRIES (IPT_BASE_CTL + 1) +#define IPT_SO_GET_REVISION_MATCH (IPT_BASE_CTL + 2) +#define IPT_SO_GET_REVISION_TARGET (IPT_BASE_CTL + 3) +#define IPT_SO_GET_MAX IPT_SO_GET_REVISION_TARGET + +/* ICMP matching stuff */ +struct ipt_icmp { + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ +}; + +/* Values for "inv" field for struct ipt_icmp. */ +#define IPT_ICMP_INV 0x01 /* Invert the sense of type/code test */ + +/* The argument to IPT_SO_GET_INFO */ +struct ipt_getinfo { + /* Which table: caller fills this in. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* Kernel fills these in. */ + /* Which hook entry points are valid: bitmask */ + unsigned int valid_hooks; + + /* Hook entry points: one per netfilter hook. */ + unsigned int hook_entry[NF_INET_NUMHOOKS]; + + /* Underflow points. */ + unsigned int underflow[NF_INET_NUMHOOKS]; + + /* Number of entries */ + unsigned int num_entries; + + /* Size of entries. */ + unsigned int size; +}; + +/* The argument to IPT_SO_SET_REPLACE. */ +struct ipt_replace { + /* Which table. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* Which hook entry points are valid: bitmask. You can't + change this. */ + unsigned int valid_hooks; + + /* Number of entries */ + unsigned int num_entries; + + /* Total size of new entries */ + unsigned int size; + + /* Hook entry points. */ + unsigned int hook_entry[NF_INET_NUMHOOKS]; + + /* Underflow points. */ + unsigned int underflow[NF_INET_NUMHOOKS]; + + /* Information about old entries: */ + /* Number of counters (must be equal to current number of entries). */ + unsigned int num_counters; + /* The old entries' counters. */ + struct xt_counters *counters; + + /* The entries (hang off end: not really an array). */ + struct ipt_entry entries[]; +}; + +/* The argument to IPT_SO_GET_ENTRIES. */ +struct ipt_get_entries { + /* Which table: user fills this in. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* User fills this in: total entry size. */ + unsigned int size; + + /* The entries. */ + struct ipt_entry entrytable[]; +}; + +/* Helper functions */ +static __inline__ struct xt_entry_target * +ipt_get_target(struct ipt_entry *e) +{ + return (struct xt_entry_target *)((char *)e + e->target_offset); +} + +/* + * Main firewall chains definitions and global var's definitions. + */ +#endif /* _IPTABLES_H */ diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h new file mode 100644 index 0000000..eedf7a2 --- /dev/null +++ b/include/uapi/linux/netfilter_ipv6.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* IPv6-specific defines for netfilter. + * (C)1998 Rusty Russell -- This code is GPL. + * (C)1999 David Jeffery + * this header was blatantly ripped from netfilter_ipv4.h + * it's amazing what adding a bunch of 6s can do =8^) + */ +#ifndef __LINUX_IP6_NETFILTER_H +#define __LINUX_IP6_NETFILTER_H + + +#include <linux/netfilter.h> + +/* only for userspace compatibility */ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + +/* IP6 Hooks */ +/* After promisc drops, checksum checks. */ +#define NF_IP6_PRE_ROUTING 0 +/* If the packet is destined for this box. */ +#define NF_IP6_LOCAL_IN 1 +/* If the packet is destined for another interface. */ +#define NF_IP6_FORWARD 2 +/* Packets coming from a local process. */ +#define NF_IP6_LOCAL_OUT 3 +/* Packets about to hit the wire. */ +#define NF_IP6_POST_ROUTING 4 +#define NF_IP6_NUMHOOKS 5 + + +enum nf_ip6_hook_priorities { + NF_IP6_PRI_FIRST = INT_MIN, + NF_IP6_PRI_RAW_BEFORE_DEFRAG = -450, + NF_IP6_PRI_CONNTRACK_DEFRAG = -400, + NF_IP6_PRI_RAW = -300, + NF_IP6_PRI_SELINUX_FIRST = -225, + NF_IP6_PRI_CONNTRACK = -200, + NF_IP6_PRI_MANGLE = -150, + NF_IP6_PRI_NAT_DST = -100, + NF_IP6_PRI_FILTER = 0, + NF_IP6_PRI_SECURITY = 50, + NF_IP6_PRI_NAT_SRC = 100, + NF_IP6_PRI_SELINUX_LAST = 225, + NF_IP6_PRI_CONNTRACK_HELPER = 300, + NF_IP6_PRI_LAST = INT_MAX, +}; + + +#endif /* __LINUX_IP6_NETFILTER_H */ diff --git a/include/uapi/linux/netfilter_ipv6/ip6_tables.h b/include/uapi/linux/netfilter_ipv6/ip6_tables.h new file mode 100644 index 0000000..68109ec --- /dev/null +++ b/include/uapi/linux/netfilter_ipv6/ip6_tables.h @@ -0,0 +1,270 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * 25-Jul-1998 Major changes to allow for ip chain table + * + * 3-Jan-2000 Named tables to allow packet selection for different uses. + */ + +/* + * Format of an IP6 firewall descriptor + * + * src, dst, src_mask, dst_mask are always stored in network byte order. + * flags are stored in host byte order (of course). + * Port numbers are stored in HOST byte order. + */ + +#ifndef _IP6_TABLES_H +#define _IP6_TABLES_H + +#include <linux/types.h> + +#include <linux/if.h> +#include <linux/netfilter_ipv6.h> + +#include <linux/netfilter/x_tables.h> + +#define IP6T_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN +#define IP6T_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN +#define ip6t_match xt_match +#define ip6t_target xt_target +#define ip6t_table xt_table +#define ip6t_get_revision xt_get_revision +#define ip6t_entry_match xt_entry_match +#define ip6t_entry_target xt_entry_target +#define ip6t_standard_target xt_standard_target +#define ip6t_error_target xt_error_target +#define ip6t_counters xt_counters +#define IP6T_CONTINUE XT_CONTINUE +#define IP6T_RETURN XT_RETURN + +/* Pre-iptables-1.4.0 */ +#include <linux/netfilter/xt_tcpudp.h> +#define ip6t_tcp xt_tcp +#define ip6t_udp xt_udp +#define IP6T_TCP_INV_SRCPT XT_TCP_INV_SRCPT +#define IP6T_TCP_INV_DSTPT XT_TCP_INV_DSTPT +#define IP6T_TCP_INV_FLAGS XT_TCP_INV_FLAGS +#define IP6T_TCP_INV_OPTION XT_TCP_INV_OPTION +#define IP6T_TCP_INV_MASK XT_TCP_INV_MASK +#define IP6T_UDP_INV_SRCPT XT_UDP_INV_SRCPT +#define IP6T_UDP_INV_DSTPT XT_UDP_INV_DSTPT +#define IP6T_UDP_INV_MASK XT_UDP_INV_MASK + +#define ip6t_counters_info xt_counters_info +#define IP6T_STANDARD_TARGET XT_STANDARD_TARGET +#define IP6T_ERROR_TARGET XT_ERROR_TARGET +#define IP6T_MATCH_ITERATE(e, fn, args...) \ + XT_MATCH_ITERATE(struct ip6t_entry, e, fn, ## args) +#define IP6T_ENTRY_ITERATE(entries, size, fn, args...) \ + XT_ENTRY_ITERATE(struct ip6t_entry, entries, size, fn, ## args) + +/* Yes, Virginia, you have to zero the padding. */ +struct ip6t_ip6 { + /* Source and destination IP6 addr */ + struct in6_addr src, dst; + /* Mask for src and dest IP6 addr */ + struct in6_addr smsk, dmsk; + char iniface[IFNAMSIZ], outiface[IFNAMSIZ]; + unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; + + /* Upper protocol number + * - The allowed value is 0 (any) or protocol number of last parsable + * header, which is 50 (ESP), 59 (No Next Header), 135 (MH), or + * the non IPv6 extension headers. + * - The protocol numbers of IPv6 extension headers except of ESP and + * MH do not match any packets. + * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol. + */ + __u16 proto; + /* TOS to match iff flags & IP6T_F_TOS */ + __u8 tos; + + /* Flags word */ + __u8 flags; + /* Inverse flags */ + __u8 invflags; +}; + +/* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */ +#define IP6T_F_PROTO 0x01 /* Set if rule cares about upper + protocols */ +#define IP6T_F_TOS 0x02 /* Match the TOS. */ +#define IP6T_F_GOTO 0x04 /* Set if jump is a goto */ +#define IP6T_F_MASK 0x07 /* All possible flag bits mask. */ + +/* Values for "inv" field in struct ip6t_ip6. */ +#define IP6T_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */ +#define IP6T_INV_VIA_OUT 0x02 /* Invert the sense of OUT IFACE */ +#define IP6T_INV_TOS 0x04 /* Invert the sense of TOS. */ +#define IP6T_INV_SRCIP 0x08 /* Invert the sense of SRC IP. */ +#define IP6T_INV_DSTIP 0x10 /* Invert the sense of DST OP. */ +#define IP6T_INV_FRAG 0x20 /* Invert the sense of FRAG. */ +#define IP6T_INV_PROTO XT_INV_PROTO +#define IP6T_INV_MASK 0x7F /* All possible flag bits mask. */ + +/* This structure defines each of the firewall rules. Consists of 3 + parts which are 1) general IP header stuff 2) match specific + stuff 3) the target to perform if the rule matches */ +struct ip6t_entry { + struct ip6t_ip6 ipv6; + + /* Mark with fields that we care about. */ + unsigned int nfcache; + + /* Size of ipt_entry + matches */ + __u16 target_offset; + /* Size of ipt_entry + matches + target */ + __u16 next_offset; + + /* Back pointer */ + unsigned int comefrom; + + /* Packet and byte counters. */ + struct xt_counters counters; + + /* The matches (if any), then the target. */ + unsigned char elems[0]; +}; + +/* Standard entry */ +struct ip6t_standard { + struct ip6t_entry entry; + struct xt_standard_target target; +}; + +struct ip6t_error { + struct ip6t_entry entry; + struct xt_error_target target; +}; + +#define IP6T_ENTRY_INIT(__size) \ +{ \ + .target_offset = sizeof(struct ip6t_entry), \ + .next_offset = (__size), \ +} + +#define IP6T_STANDARD_INIT(__verdict) \ +{ \ + .entry = IP6T_ENTRY_INIT(sizeof(struct ip6t_standard)), \ + .target = XT_TARGET_INIT(XT_STANDARD_TARGET, \ + sizeof(struct xt_standard_target)), \ + .target.verdict = -(__verdict) - 1, \ +} + +#define IP6T_ERROR_INIT \ +{ \ + .entry = IP6T_ENTRY_INIT(sizeof(struct ip6t_error)), \ + .target = XT_TARGET_INIT(XT_ERROR_TARGET, \ + sizeof(struct xt_error_target)), \ + .target.errorname = "ERROR", \ +} + +/* + * New IP firewall options for [gs]etsockopt at the RAW IP level. + * Unlike BSD Linux inherits IP options so you don't have to use + * a raw socket for this. Instead we check rights in the calls. + * + * ATTENTION: check linux/in6.h before adding new number here. + */ +#define IP6T_BASE_CTL 64 + +#define IP6T_SO_SET_REPLACE (IP6T_BASE_CTL) +#define IP6T_SO_SET_ADD_COUNTERS (IP6T_BASE_CTL + 1) +#define IP6T_SO_SET_MAX IP6T_SO_SET_ADD_COUNTERS + +#define IP6T_SO_GET_INFO (IP6T_BASE_CTL) +#define IP6T_SO_GET_ENTRIES (IP6T_BASE_CTL + 1) +#define IP6T_SO_GET_REVISION_MATCH (IP6T_BASE_CTL + 4) +#define IP6T_SO_GET_REVISION_TARGET (IP6T_BASE_CTL + 5) +#define IP6T_SO_GET_MAX IP6T_SO_GET_REVISION_TARGET + +/* obtain original address if REDIRECT'd connection */ +#define IP6T_SO_ORIGINAL_DST 80 + +/* ICMP matching stuff */ +struct ip6t_icmp { + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ +}; + +/* Values for "inv" field for struct ipt_icmp. */ +#define IP6T_ICMP_INV 0x01 /* Invert the sense of type/code test */ + +/* The argument to IP6T_SO_GET_INFO */ +struct ip6t_getinfo { + /* Which table: caller fills this in. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* Kernel fills these in. */ + /* Which hook entry points are valid: bitmask */ + unsigned int valid_hooks; + + /* Hook entry points: one per netfilter hook. */ + unsigned int hook_entry[NF_INET_NUMHOOKS]; + + /* Underflow points. */ + unsigned int underflow[NF_INET_NUMHOOKS]; + + /* Number of entries */ + unsigned int num_entries; + + /* Size of entries. */ + unsigned int size; +}; + +/* The argument to IP6T_SO_SET_REPLACE. */ +struct ip6t_replace { + /* Which table. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* Which hook entry points are valid: bitmask. You can't + change this. */ + unsigned int valid_hooks; + + /* Number of entries */ + unsigned int num_entries; + + /* Total size of new entries */ + unsigned int size; + + /* Hook entry points. */ + unsigned int hook_entry[NF_INET_NUMHOOKS]; + + /* Underflow points. */ + unsigned int underflow[NF_INET_NUMHOOKS]; + + /* Information about old entries: */ + /* Number of counters (must be equal to current number of entries). */ + unsigned int num_counters; + /* The old entries' counters. */ + struct xt_counters *counters; + + /* The entries (hang off end: not really an array). */ + struct ip6t_entry entries[]; +}; + +/* The argument to IP6T_SO_GET_ENTRIES. */ +struct ip6t_get_entries { + /* Which table: user fills this in. */ + char name[XT_TABLE_MAXNAMELEN]; + + /* User fills this in: total entry size. */ + unsigned int size; + + /* The entries. */ + struct ip6t_entry entrytable[]; +}; + +/* Helper functions */ +static __inline__ struct xt_entry_target * +ip6t_get_target(struct ip6t_entry *e) +{ + return (struct xt_entry_target *)((char *)e + e->target_offset); +} + +/* + * Main firewall chains definitions and global var's definitions. + */ + +#endif /* _IP6_TABLES_H */ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h new file mode 100644 index 0000000..ff64eb1 --- /dev/null +++ b/include/uapi/linux/netlink.h @@ -0,0 +1,379 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_NETLINK_H +#define __LINUX_NETLINK_H + +#include <linux/const.h> +#include <linux/socket.h> /* for __kernel_sa_family_t */ +#include <linux/types.h> + +#define NETLINK_ROUTE 0 /* Routing/device hook */ +#define NETLINK_UNUSED 1 /* Unused number */ +#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ +#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ +#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ +#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ +#define NETLINK_XFRM 6 /* ipsec */ +#define NETLINK_SELINUX 7 /* SELinux event notifications */ +#define NETLINK_ISCSI 8 /* Open-iSCSI */ +#define NETLINK_AUDIT 9 /* auditing */ +#define NETLINK_FIB_LOOKUP 10 +#define NETLINK_CONNECTOR 11 +#define NETLINK_NETFILTER 12 /* netfilter subsystem */ +#define NETLINK_IP6_FW 13 +#define NETLINK_DNRTMSG 14 /* DECnet routing messages (obsolete) */ +#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ +#define NETLINK_GENERIC 16 +/* leave room for NETLINK_DM (DM Events) */ +#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ +#define NETLINK_ECRYPTFS 19 +#define NETLINK_RDMA 20 +#define NETLINK_CRYPTO 21 /* Crypto layer */ +#define NETLINK_SMC 22 /* SMC monitoring */ + +#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG + +#define MAX_LINKS 32 + +struct sockaddr_nl { + __kernel_sa_family_t nl_family; /* AF_NETLINK */ + unsigned short nl_pad; /* zero */ + __u32 nl_pid; /* port ID */ + __u32 nl_groups; /* multicast groups mask */ +}; + +/** + * struct nlmsghdr - fixed format metadata header of Netlink messages + * @nlmsg_len: Length of message including header + * @nlmsg_type: Message content type + * @nlmsg_flags: Additional flags + * @nlmsg_seq: Sequence number + * @nlmsg_pid: Sending process port ID + */ +struct nlmsghdr { + __u32 nlmsg_len; + __u16 nlmsg_type; + __u16 nlmsg_flags; + __u32 nlmsg_seq; + __u32 nlmsg_pid; +}; + +/* Flags values */ + +#define NLM_F_REQUEST 0x01 /* It is request message. */ +#define NLM_F_MULTI 0x02 /* Multipart message, terminated by NLMSG_DONE */ +#define NLM_F_ACK 0x04 /* Reply with ack, with zero or error code */ +#define NLM_F_ECHO 0x08 /* Receive resulting notifications */ +#define NLM_F_DUMP_INTR 0x10 /* Dump was inconsistent due to sequence change */ +#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */ + +/* Modifiers to GET request */ +#define NLM_F_ROOT 0x100 /* specify tree root */ +#define NLM_F_MATCH 0x200 /* return all matching */ +#define NLM_F_ATOMIC 0x400 /* atomic GET */ +#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) + +/* Modifiers to NEW request */ +#define NLM_F_REPLACE 0x100 /* Override existing */ +#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ +#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ +#define NLM_F_APPEND 0x800 /* Add to end of list */ + +/* Modifiers to DELETE request */ +#define NLM_F_NONREC 0x100 /* Do not delete recursively */ +#define NLM_F_BULK 0x200 /* Delete multiple objects */ + +/* Flags for ACK message */ +#define NLM_F_CAPPED 0x100 /* request was capped */ +#define NLM_F_ACK_TLVS 0x200 /* extended ACK TVLs were included */ + +/* + 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL + 4.4BSD CHANGE NLM_F_REPLACE + + True CHANGE NLM_F_CREATE|NLM_F_REPLACE + Append NLM_F_CREATE + Check NLM_F_EXCL + */ + +#define NLMSG_ALIGNTO 4U +#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) +#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) +#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN) +#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) +#define NLMSG_DATA(nlh) ((void *)(((char *)nlh) + NLMSG_HDRLEN)) +#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ + (struct nlmsghdr *)(((char *)(nlh)) + \ + NLMSG_ALIGN((nlh)->nlmsg_len))) +#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len <= (len)) +#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) + +#define NLMSG_NOOP 0x1 /* Nothing. */ +#define NLMSG_ERROR 0x2 /* Error */ +#define NLMSG_DONE 0x3 /* End of a dump */ +#define NLMSG_OVERRUN 0x4 /* Data lost */ + +#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ + +struct nlmsgerr { + int error; + struct nlmsghdr msg; + /* + * followed by the message contents unless NETLINK_CAP_ACK was set + * or the ACK indicates success (error == 0) + * message length is aligned with NLMSG_ALIGN() + */ + /* + * followed by TLVs defined in enum nlmsgerr_attrs + * if NETLINK_EXT_ACK was set + */ +}; + +/** + * enum nlmsgerr_attrs - nlmsgerr attributes + * @NLMSGERR_ATTR_UNUSED: unused + * @NLMSGERR_ATTR_MSG: error message string (string) + * @NLMSGERR_ATTR_OFFS: offset of the invalid attribute in the original + * message, counting from the beginning of the header (u32) + * @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to + * be used - in the success case - to identify a created + * object or operation or similar (binary) + * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute + * @NLMSGERR_ATTR_MISS_TYPE: type of a missing required attribute, + * %NLMSGERR_ATTR_MISS_NEST will not be present if the attribute was + * missing at the message level + * @NLMSGERR_ATTR_MISS_NEST: offset of the nest where attribute was missing + * @__NLMSGERR_ATTR_MAX: number of attributes + * @NLMSGERR_ATTR_MAX: highest attribute number + */ +enum nlmsgerr_attrs { + NLMSGERR_ATTR_UNUSED, + NLMSGERR_ATTR_MSG, + NLMSGERR_ATTR_OFFS, + NLMSGERR_ATTR_COOKIE, + NLMSGERR_ATTR_POLICY, + NLMSGERR_ATTR_MISS_TYPE, + NLMSGERR_ATTR_MISS_NEST, + + __NLMSGERR_ATTR_MAX, + NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 +}; + +#define NETLINK_ADD_MEMBERSHIP 1 +#define NETLINK_DROP_MEMBERSHIP 2 +#define NETLINK_PKTINFO 3 +#define NETLINK_BROADCAST_ERROR 4 +#define NETLINK_NO_ENOBUFS 5 +#define NETLINK_RX_RING 6 +#define NETLINK_TX_RING 7 +#define NETLINK_LISTEN_ALL_NSID 8 +#define NETLINK_LIST_MEMBERSHIPS 9 +#define NETLINK_CAP_ACK 10 +#define NETLINK_EXT_ACK 11 +#define NETLINK_GET_STRICT_CHK 12 + +struct nl_pktinfo { + __u32 group; +}; + +struct nl_mmap_req { + unsigned int nm_block_size; + unsigned int nm_block_nr; + unsigned int nm_frame_size; + unsigned int nm_frame_nr; +}; + +struct nl_mmap_hdr { + unsigned int nm_status; + unsigned int nm_len; + __u32 nm_group; + /* credentials */ + __u32 nm_pid; + __u32 nm_uid; + __u32 nm_gid; +}; + +enum nl_mmap_status { + NL_MMAP_STATUS_UNUSED, + NL_MMAP_STATUS_RESERVED, + NL_MMAP_STATUS_VALID, + NL_MMAP_STATUS_COPY, + NL_MMAP_STATUS_SKIP, +}; + +#define NL_MMAP_MSG_ALIGNMENT NLMSG_ALIGNTO +#define NL_MMAP_MSG_ALIGN(sz) __ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT) +#define NL_MMAP_HDRLEN NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr)) + +#define NET_MAJOR 36 /* Major 36 is reserved for networking */ + +enum { + NETLINK_UNCONNECTED = 0, + NETLINK_CONNECTED, +}; + +/* + * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * | Header | Pad | Payload | Pad | + * | (struct nlattr) | ing | | ing | + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * <-------------- nlattr->nla_len --------------> + */ + +struct nlattr { + __u16 nla_len; + __u16 nla_type; +}; + +/* + * nla_type (16 bits) + * +---+---+-------------------------------+ + * | N | O | Attribute Type | + * +---+---+-------------------------------+ + * N := Carries nested attributes + * O := Payload stored in network byte order + * + * Note: The N and O flag are mutually exclusive. + */ +#define NLA_F_NESTED (1 << 15) +#define NLA_F_NET_BYTEORDER (1 << 14) +#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) + +#define NLA_ALIGNTO 4 +#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) +#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) + +/* Generic 32 bitflags attribute content sent to the kernel. + * + * The value is a bitmap that defines the values being set + * The selector is a bitmask that defines which value is legit + * + * Examples: + * value = 0x0, and selector = 0x1 + * implies we are selecting bit 1 and we want to set its value to 0. + * + * value = 0x2, and selector = 0x2 + * implies we are selecting bit 2 and we want to set its value to 1. + * + */ +struct nla_bitfield32 { + __u32 value; + __u32 selector; +}; + +/* + * policy descriptions - it's specific to each family how this is used + * Normally, it should be retrieved via a dump inside another attribute + * specifying where it applies. + */ + +/** + * enum netlink_attribute_type - type of an attribute + * @NL_ATTR_TYPE_INVALID: unused + * @NL_ATTR_TYPE_FLAG: flag attribute (present/not present) + * @NL_ATTR_TYPE_U8: 8-bit unsigned attribute + * @NL_ATTR_TYPE_U16: 16-bit unsigned attribute + * @NL_ATTR_TYPE_U32: 32-bit unsigned attribute + * @NL_ATTR_TYPE_U64: 64-bit unsigned attribute + * @NL_ATTR_TYPE_S8: 8-bit signed attribute + * @NL_ATTR_TYPE_S16: 16-bit signed attribute + * @NL_ATTR_TYPE_S32: 32-bit signed attribute + * @NL_ATTR_TYPE_S64: 64-bit signed attribute + * @NL_ATTR_TYPE_BINARY: binary data, min/max length may be specified + * @NL_ATTR_TYPE_STRING: string, min/max length may be specified + * @NL_ATTR_TYPE_NUL_STRING: NUL-terminated string, + * min/max length may be specified + * @NL_ATTR_TYPE_NESTED: nested, i.e. the content of this attribute + * consists of sub-attributes. The nested policy and maxtype + * inside may be specified. + * @NL_ATTR_TYPE_NESTED_ARRAY: nested array, i.e. the content of this + * attribute contains sub-attributes whose type is irrelevant + * (just used to separate the array entries) and each such array + * entry has attributes again, the policy for those inner ones + * and the corresponding maxtype may be specified. + * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute + * @NL_ATTR_TYPE_SINT: 32-bit or 64-bit signed attribute, aligned to 4B + * @NL_ATTR_TYPE_UINT: 32-bit or 64-bit unsigned attribute, aligned to 4B + */ +enum netlink_attribute_type { + NL_ATTR_TYPE_INVALID, + + NL_ATTR_TYPE_FLAG, + + NL_ATTR_TYPE_U8, + NL_ATTR_TYPE_U16, + NL_ATTR_TYPE_U32, + NL_ATTR_TYPE_U64, + + NL_ATTR_TYPE_S8, + NL_ATTR_TYPE_S16, + NL_ATTR_TYPE_S32, + NL_ATTR_TYPE_S64, + + NL_ATTR_TYPE_BINARY, + NL_ATTR_TYPE_STRING, + NL_ATTR_TYPE_NUL_STRING, + + NL_ATTR_TYPE_NESTED, + NL_ATTR_TYPE_NESTED_ARRAY, + + NL_ATTR_TYPE_BITFIELD32, + + NL_ATTR_TYPE_SINT, + NL_ATTR_TYPE_UINT, +}; + +/** + * enum netlink_policy_type_attr - policy type attributes + * @NL_POLICY_TYPE_ATTR_UNSPEC: unused + * @NL_POLICY_TYPE_ATTR_TYPE: type of the attribute, + * &enum netlink_attribute_type (U32) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_S: minimum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_S: maximum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_U: minimum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_U: maximum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MIN_LENGTH: minimum length for binary + * attributes, no minimum if not given (U32) + * @NL_POLICY_TYPE_ATTR_MAX_LENGTH: maximum length for binary + * attributes, no maximum if not given (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_IDX: sub policy for nested and + * nested array types (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE: maximum sub policy + * attribute for nested and nested array types, this can + * in theory be < the size of the policy pointed to by + * the index, if limited inside the nesting (U32) + * @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the + * bitfield32 type (U32) + * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64) + * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment + * + * @__NL_POLICY_TYPE_ATTR_MAX: number of attributes + * @NL_POLICY_TYPE_ATTR_MAX: highest attribute number + */ +enum netlink_policy_type_attr { + NL_POLICY_TYPE_ATTR_UNSPEC, + NL_POLICY_TYPE_ATTR_TYPE, + NL_POLICY_TYPE_ATTR_MIN_VALUE_S, + NL_POLICY_TYPE_ATTR_MAX_VALUE_S, + NL_POLICY_TYPE_ATTR_MIN_VALUE_U, + NL_POLICY_TYPE_ATTR_MAX_VALUE_U, + NL_POLICY_TYPE_ATTR_MIN_LENGTH, + NL_POLICY_TYPE_ATTR_MAX_LENGTH, + NL_POLICY_TYPE_ATTR_POLICY_IDX, + NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE, + NL_POLICY_TYPE_ATTR_BITFIELD32_MASK, + NL_POLICY_TYPE_ATTR_PAD, + NL_POLICY_TYPE_ATTR_MASK, + + /* keep last */ + __NL_POLICY_TYPE_ATTR_MAX, + NL_POLICY_TYPE_ATTR_MAX = __NL_POLICY_TYPE_ATTR_MAX - 1 +}; + +#endif /* __LINUX_NETLINK_H */ diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h new file mode 100644 index 0000000..4cd0657 --- /dev/null +++ b/include/uapi/linux/netlink_diag.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __NETLINK_DIAG_H__ +#define __NETLINK_DIAG_H__ + +#include <linux/types.h> + +struct netlink_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u16 pad; + __u32 ndiag_ino; + __u32 ndiag_show; + __u32 ndiag_cookie[2]; +}; + +struct netlink_diag_msg { + __u8 ndiag_family; + __u8 ndiag_type; + __u8 ndiag_protocol; + __u8 ndiag_state; + + __u32 ndiag_portid; + __u32 ndiag_dst_portid; + __u32 ndiag_dst_group; + __u32 ndiag_ino; + __u32 ndiag_cookie[2]; +}; + +struct netlink_diag_ring { + __u32 ndr_block_size; + __u32 ndr_block_nr; + __u32 ndr_frame_size; + __u32 ndr_frame_nr; +}; + +enum { + /* NETLINK_DIAG_NONE, standard nl API requires this attribute! */ + NETLINK_DIAG_MEMINFO, + NETLINK_DIAG_GROUPS, + NETLINK_DIAG_RX_RING, + NETLINK_DIAG_TX_RING, + NETLINK_DIAG_FLAGS, + + __NETLINK_DIAG_MAX, +}; + +#define NETLINK_DIAG_MAX (__NETLINK_DIAG_MAX - 1) + +#define NDIAG_PROTO_ALL ((__u8) ~0) + +#define NDIAG_SHOW_MEMINFO 0x00000001 /* show memory info of a socket */ +#define NDIAG_SHOW_GROUPS 0x00000002 /* show groups of a netlink socket */ +/* deprecated since 4.6 */ +#define NDIAG_SHOW_RING_CFG 0x00000004 /* show ring configuration */ +#define NDIAG_SHOW_FLAGS 0x00000008 /* show flags of a netlink socket */ + +/* flags */ +#define NDIAG_FLAG_CB_RUNNING 0x00000001 +#define NDIAG_FLAG_PKTINFO 0x00000002 +#define NDIAG_FLAG_BROADCAST_ERROR 0x00000004 +#define NDIAG_FLAG_NO_ENOBUFS 0x00000008 +#define NDIAG_FLAG_LISTEN_ALL_NSID 0x00000010 +#define NDIAG_FLAG_CAP_ACK 0x00000020 + +#endif diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h new file mode 100644 index 0000000..37b14b4 --- /dev/null +++ b/include/uapi/linux/nexthop.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_NEXTHOP_H +#define _LINUX_NEXTHOP_H + +#include <linux/types.h> + +struct nhmsg { + unsigned char nh_family; + unsigned char nh_scope; /* return only */ + unsigned char nh_protocol; /* Routing protocol that installed nh */ + unsigned char resvd; + unsigned int nh_flags; /* RTNH_F flags */ +}; + +/* entry in a nexthop group */ +struct nexthop_grp { + __u32 id; /* nexthop id - must exist */ + __u8 weight; /* weight of this nexthop */ + __u8 resvd1; + __u16 resvd2; +}; + +enum { + NEXTHOP_GRP_TYPE_MPATH, /* hash-threshold nexthop group + * default type if not specified + */ + NEXTHOP_GRP_TYPE_RES, /* resilient nexthop group */ + __NEXTHOP_GRP_TYPE_MAX, +}; + +#define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1) + +enum { + NHA_UNSPEC, + NHA_ID, /* u32; id for nexthop. id == 0 means auto-assign */ + + NHA_GROUP, /* array of nexthop_grp */ + NHA_GROUP_TYPE, /* u16 one of NEXTHOP_GRP_TYPE */ + /* if NHA_GROUP attribute is added, no other attributes can be set */ + + NHA_BLACKHOLE, /* flag; nexthop used to blackhole packets */ + /* if NHA_BLACKHOLE is added, OIF, GATEWAY, ENCAP can not be set */ + + NHA_OIF, /* u32; nexthop device */ + NHA_GATEWAY, /* be32 (IPv4) or in6_addr (IPv6) gw address */ + NHA_ENCAP_TYPE, /* u16; lwt encap type */ + NHA_ENCAP, /* lwt encap data */ + + /* NHA_OIF can be appended to dump request to return only + * nexthops using given device + */ + NHA_GROUPS, /* flag; only return nexthop groups in dump */ + NHA_MASTER, /* u32; only return nexthops with given master dev */ + + NHA_FDB, /* flag; nexthop belongs to a bridge fdb */ + /* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */ + + /* nested; resilient nexthop group attributes */ + NHA_RES_GROUP, + /* nested; nexthop bucket attributes */ + NHA_RES_BUCKET, + + __NHA_MAX, +}; + +#define NHA_MAX (__NHA_MAX - 1) + +enum { + NHA_RES_GROUP_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_GROUP_PAD = NHA_RES_GROUP_UNSPEC, + + /* u16; number of nexthop buckets in a resilient nexthop group */ + NHA_RES_GROUP_BUCKETS, + /* clock_t as u32; nexthop bucket idle timer (per-group) */ + NHA_RES_GROUP_IDLE_TIMER, + /* clock_t as u32; nexthop unbalanced timer */ + NHA_RES_GROUP_UNBALANCED_TIMER, + /* clock_t as u64; nexthop unbalanced time */ + NHA_RES_GROUP_UNBALANCED_TIME, + + __NHA_RES_GROUP_MAX, +}; + +#define NHA_RES_GROUP_MAX (__NHA_RES_GROUP_MAX - 1) + +enum { + NHA_RES_BUCKET_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_BUCKET_PAD = NHA_RES_BUCKET_UNSPEC, + + /* u16; nexthop bucket index */ + NHA_RES_BUCKET_INDEX, + /* clock_t as u64; nexthop bucket idle time */ + NHA_RES_BUCKET_IDLE_TIME, + /* u32; nexthop id assigned to the nexthop bucket */ + NHA_RES_BUCKET_NH_ID, + + __NHA_RES_BUCKET_MAX, +}; + +#define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1) + +#endif diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h new file mode 100644 index 0000000..349ddf0 --- /dev/null +++ b/include/uapi/linux/packet_diag.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __PACKET_DIAG_H__ +#define __PACKET_DIAG_H__ + +#include <linux/types.h> + +struct packet_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u16 pad; + __u32 pdiag_ino; + __u32 pdiag_show; + __u32 pdiag_cookie[2]; +}; + +#define PACKET_SHOW_INFO 0x00000001 /* Basic packet_sk information */ +#define PACKET_SHOW_MCLIST 0x00000002 /* A set of packet_diag_mclist-s */ +#define PACKET_SHOW_RING_CFG 0x00000004 /* Rings configuration parameters */ +#define PACKET_SHOW_FANOUT 0x00000008 +#define PACKET_SHOW_MEMINFO 0x00000010 +#define PACKET_SHOW_FILTER 0x00000020 + +struct packet_diag_msg { + __u8 pdiag_family; + __u8 pdiag_type; + __u16 pdiag_num; + + __u32 pdiag_ino; + __u32 pdiag_cookie[2]; +}; + +enum { + /* PACKET_DIAG_NONE, standard nl API requires this attribute! */ + PACKET_DIAG_INFO, + PACKET_DIAG_MCLIST, + PACKET_DIAG_RX_RING, + PACKET_DIAG_TX_RING, + PACKET_DIAG_FANOUT, + PACKET_DIAG_UID, + PACKET_DIAG_MEMINFO, + PACKET_DIAG_FILTER, + + __PACKET_DIAG_MAX, +}; + +#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1) + +struct packet_diag_info { + __u32 pdi_index; + __u32 pdi_version; + __u32 pdi_reserve; + __u32 pdi_copy_thresh; + __u32 pdi_tstamp; + __u32 pdi_flags; + +#define PDI_RUNNING 0x1 +#define PDI_AUXDATA 0x2 +#define PDI_ORIGDEV 0x4 +#define PDI_VNETHDR 0x8 +#define PDI_LOSS 0x10 +}; + +struct packet_diag_mclist { + __u32 pdmc_index; + __u32 pdmc_count; + __u16 pdmc_type; + __u16 pdmc_alen; + __u8 pdmc_addr[32]; /* MAX_ADDR_LEN */ +}; + +struct packet_diag_ring { + __u32 pdr_block_size; + __u32 pdr_block_nr; + __u32 pdr_frame_size; + __u32 pdr_frame_nr; + __u32 pdr_retire_tmo; + __u32 pdr_sizeof_priv; + __u32 pdr_features; +}; + +#endif diff --git a/include/uapi/linux/param.h b/include/uapi/linux/param.h new file mode 100644 index 0000000..94e0c57 --- /dev/null +++ b/include/uapi/linux/param.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_PARAM_H +#define _LINUX_PARAM_H + +#include <asm/param.h> + +#endif diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h new file mode 100644 index 0000000..8abae1f --- /dev/null +++ b/include/uapi/linux/pfkeyv2.h @@ -0,0 +1,386 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* PF_KEY user interface, this is defined by rfc2367 so + * do not make arbitrary modifications or else this header + * file will not be compliant. + */ + +#ifndef _LINUX_PFKEY2_H +#define _LINUX_PFKEY2_H + +#include <linux/types.h> + +#define PF_KEY_V2 2 +#define PFKEYV2_REVISION 199806L + +struct sadb_msg { + __u8 sadb_msg_version; + __u8 sadb_msg_type; + __u8 sadb_msg_errno; + __u8 sadb_msg_satype; + __u16 sadb_msg_len; + __u16 sadb_msg_reserved; + __u32 sadb_msg_seq; + __u32 sadb_msg_pid; +} __attribute__((packed)); +/* sizeof(struct sadb_msg) == 16 */ + +struct sadb_ext { + __u16 sadb_ext_len; + __u16 sadb_ext_type; +} __attribute__((packed)); +/* sizeof(struct sadb_ext) == 4 */ + +struct sadb_sa { + __u16 sadb_sa_len; + __u16 sadb_sa_exttype; + __be32 sadb_sa_spi; + __u8 sadb_sa_replay; + __u8 sadb_sa_state; + __u8 sadb_sa_auth; + __u8 sadb_sa_encrypt; + __u32 sadb_sa_flags; +} __attribute__((packed)); +/* sizeof(struct sadb_sa) == 16 */ + +struct sadb_lifetime { + __u16 sadb_lifetime_len; + __u16 sadb_lifetime_exttype; + __u32 sadb_lifetime_allocations; + __u64 sadb_lifetime_bytes; + __u64 sadb_lifetime_addtime; + __u64 sadb_lifetime_usetime; +} __attribute__((packed)); +/* sizeof(struct sadb_lifetime) == 32 */ + +struct sadb_address { + __u16 sadb_address_len; + __u16 sadb_address_exttype; + __u8 sadb_address_proto; + __u8 sadb_address_prefixlen; + __u16 sadb_address_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_address) == 8 */ + +struct sadb_key { + __u16 sadb_key_len; + __u16 sadb_key_exttype; + __u16 sadb_key_bits; + __u16 sadb_key_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_key) == 8 */ + +struct sadb_ident { + __u16 sadb_ident_len; + __u16 sadb_ident_exttype; + __u16 sadb_ident_type; + __u16 sadb_ident_reserved; + __u64 sadb_ident_id; +} __attribute__((packed)); +/* sizeof(struct sadb_ident) == 16 */ + +struct sadb_sens { + __u16 sadb_sens_len; + __u16 sadb_sens_exttype; + __u32 sadb_sens_dpd; + __u8 sadb_sens_sens_level; + __u8 sadb_sens_sens_len; + __u8 sadb_sens_integ_level; + __u8 sadb_sens_integ_len; + __u32 sadb_sens_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_sens) == 16 */ + +/* followed by: + __u64 sadb_sens_bitmap[sens_len]; + __u64 sadb_integ_bitmap[integ_len]; */ + +struct sadb_prop { + __u16 sadb_prop_len; + __u16 sadb_prop_exttype; + __u8 sadb_prop_replay; + __u8 sadb_prop_reserved[3]; +} __attribute__((packed)); +/* sizeof(struct sadb_prop) == 8 */ + +/* followed by: + struct sadb_comb sadb_combs[(sadb_prop_len + + sizeof(__u64) - sizeof(struct sadb_prop)) / + sizeof(struct sadb_comb)]; */ + +struct sadb_comb { + __u8 sadb_comb_auth; + __u8 sadb_comb_encrypt; + __u16 sadb_comb_flags; + __u16 sadb_comb_auth_minbits; + __u16 sadb_comb_auth_maxbits; + __u16 sadb_comb_encrypt_minbits; + __u16 sadb_comb_encrypt_maxbits; + __u32 sadb_comb_reserved; + __u32 sadb_comb_soft_allocations; + __u32 sadb_comb_hard_allocations; + __u64 sadb_comb_soft_bytes; + __u64 sadb_comb_hard_bytes; + __u64 sadb_comb_soft_addtime; + __u64 sadb_comb_hard_addtime; + __u64 sadb_comb_soft_usetime; + __u64 sadb_comb_hard_usetime; +} __attribute__((packed)); +/* sizeof(struct sadb_comb) == 72 */ + +struct sadb_supported { + __u16 sadb_supported_len; + __u16 sadb_supported_exttype; + __u32 sadb_supported_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_supported) == 8 */ + +/* followed by: + struct sadb_alg sadb_algs[(sadb_supported_len + + sizeof(__u64) - sizeof(struct sadb_supported)) / + sizeof(struct sadb_alg)]; */ + +struct sadb_alg { + __u8 sadb_alg_id; + __u8 sadb_alg_ivlen; + __u16 sadb_alg_minbits; + __u16 sadb_alg_maxbits; + __u16 sadb_alg_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_alg) == 8 */ + +struct sadb_spirange { + __u16 sadb_spirange_len; + __u16 sadb_spirange_exttype; + __u32 sadb_spirange_min; + __u32 sadb_spirange_max; + __u32 sadb_spirange_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_spirange) == 16 */ + +struct sadb_x_kmprivate { + __u16 sadb_x_kmprivate_len; + __u16 sadb_x_kmprivate_exttype; + __u32 sadb_x_kmprivate_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_x_kmprivate) == 8 */ + +struct sadb_x_sa2 { + __u16 sadb_x_sa2_len; + __u16 sadb_x_sa2_exttype; + __u8 sadb_x_sa2_mode; + __u8 sadb_x_sa2_reserved1; + __u16 sadb_x_sa2_reserved2; + __u32 sadb_x_sa2_sequence; + __u32 sadb_x_sa2_reqid; +} __attribute__((packed)); +/* sizeof(struct sadb_x_sa2) == 16 */ + +struct sadb_x_policy { + __u16 sadb_x_policy_len; + __u16 sadb_x_policy_exttype; + __u16 sadb_x_policy_type; + __u8 sadb_x_policy_dir; + __u8 sadb_x_policy_reserved; + __u32 sadb_x_policy_id; + __u32 sadb_x_policy_priority; +} __attribute__((packed)); +/* sizeof(struct sadb_x_policy) == 16 */ + +struct sadb_x_ipsecrequest { + __u16 sadb_x_ipsecrequest_len; + __u16 sadb_x_ipsecrequest_proto; + __u8 sadb_x_ipsecrequest_mode; + __u8 sadb_x_ipsecrequest_level; + __u16 sadb_x_ipsecrequest_reserved1; + __u32 sadb_x_ipsecrequest_reqid; + __u32 sadb_x_ipsecrequest_reserved2; +} __attribute__((packed)); +/* sizeof(struct sadb_x_ipsecrequest) == 16 */ + +/* This defines the TYPE of Nat Traversal in use. Currently only one + * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06 + */ +struct sadb_x_nat_t_type { + __u16 sadb_x_nat_t_type_len; + __u16 sadb_x_nat_t_type_exttype; + __u8 sadb_x_nat_t_type_type; + __u8 sadb_x_nat_t_type_reserved[3]; +} __attribute__((packed)); +/* sizeof(struct sadb_x_nat_t_type) == 8 */ + +/* Pass a NAT Traversal port (Source or Dest port) */ +struct sadb_x_nat_t_port { + __u16 sadb_x_nat_t_port_len; + __u16 sadb_x_nat_t_port_exttype; + __be16 sadb_x_nat_t_port_port; + __u16 sadb_x_nat_t_port_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_x_nat_t_port) == 8 */ + +/* Generic LSM security context */ +struct sadb_x_sec_ctx { + __u16 sadb_x_sec_len; + __u16 sadb_x_sec_exttype; + __u8 sadb_x_ctx_alg; /* LSMs: e.g., selinux == 1 */ + __u8 sadb_x_ctx_doi; + __u16 sadb_x_ctx_len; +} __attribute__((packed)); +/* sizeof(struct sadb_sec_ctx) = 8 */ + +/* Used by MIGRATE to pass addresses IKE will use to perform + * negotiation with the peer */ +struct sadb_x_kmaddress { + __u16 sadb_x_kmaddress_len; + __u16 sadb_x_kmaddress_exttype; + __u32 sadb_x_kmaddress_reserved; +} __attribute__((packed)); +/* sizeof(struct sadb_x_kmaddress) == 8 */ + +/* To specify the SA dump filter */ +struct sadb_x_filter { + __u16 sadb_x_filter_len; + __u16 sadb_x_filter_exttype; + __u32 sadb_x_filter_saddr[4]; + __u32 sadb_x_filter_daddr[4]; + __u16 sadb_x_filter_family; + __u8 sadb_x_filter_splen; + __u8 sadb_x_filter_dplen; +} __attribute__((packed)); +/* sizeof(struct sadb_x_filter) == 40 */ + +/* Message types */ +#define SADB_RESERVED 0 +#define SADB_GETSPI 1 +#define SADB_UPDATE 2 +#define SADB_ADD 3 +#define SADB_DELETE 4 +#define SADB_GET 5 +#define SADB_ACQUIRE 6 +#define SADB_REGISTER 7 +#define SADB_EXPIRE 8 +#define SADB_FLUSH 9 +#define SADB_DUMP 10 +#define SADB_X_PROMISC 11 +#define SADB_X_PCHANGE 12 +#define SADB_X_SPDUPDATE 13 +#define SADB_X_SPDADD 14 +#define SADB_X_SPDDELETE 15 +#define SADB_X_SPDGET 16 +#define SADB_X_SPDACQUIRE 17 +#define SADB_X_SPDDUMP 18 +#define SADB_X_SPDFLUSH 19 +#define SADB_X_SPDSETIDX 20 +#define SADB_X_SPDEXPIRE 21 +#define SADB_X_SPDDELETE2 22 +#define SADB_X_NAT_T_NEW_MAPPING 23 +#define SADB_X_MIGRATE 24 +#define SADB_MAX 24 + +/* Security Association flags */ +#define SADB_SAFLAGS_PFS 1 +#define SADB_SAFLAGS_NOPMTUDISC 0x20000000 +#define SADB_SAFLAGS_DECAP_DSCP 0x40000000 +#define SADB_SAFLAGS_NOECN 0x80000000 + +/* Security Association states */ +#define SADB_SASTATE_LARVAL 0 +#define SADB_SASTATE_MATURE 1 +#define SADB_SASTATE_DYING 2 +#define SADB_SASTATE_DEAD 3 +#define SADB_SASTATE_MAX 3 + +/* Security Association types */ +#define SADB_SATYPE_UNSPEC 0 +#define SADB_SATYPE_AH 2 +#define SADB_SATYPE_ESP 3 +#define SADB_SATYPE_RSVP 5 +#define SADB_SATYPE_OSPFV2 6 +#define SADB_SATYPE_RIPV2 7 +#define SADB_SATYPE_MIP 8 +#define SADB_X_SATYPE_IPCOMP 9 +#define SADB_SATYPE_MAX 9 + +/* Authentication algorithms */ +#define SADB_AALG_NONE 0 +#define SADB_AALG_MD5HMAC 2 +#define SADB_AALG_SHA1HMAC 3 +#define SADB_X_AALG_SHA2_256HMAC 5 +#define SADB_X_AALG_SHA2_384HMAC 6 +#define SADB_X_AALG_SHA2_512HMAC 7 +#define SADB_X_AALG_RIPEMD160HMAC 8 +#define SADB_X_AALG_AES_XCBC_MAC 9 +#define SADB_X_AALG_SM3_256HMAC 10 +#define SADB_X_AALG_NULL 251 /* kame */ +#define SADB_AALG_MAX 251 + +/* Encryption algorithms */ +#define SADB_EALG_NONE 0 +#define SADB_EALG_DESCBC 2 +#define SADB_EALG_3DESCBC 3 +#define SADB_X_EALG_CASTCBC 6 +#define SADB_X_EALG_BLOWFISHCBC 7 +#define SADB_EALG_NULL 11 +#define SADB_X_EALG_AESCBC 12 +#define SADB_X_EALG_AESCTR 13 +#define SADB_X_EALG_AES_CCM_ICV8 14 +#define SADB_X_EALG_AES_CCM_ICV12 15 +#define SADB_X_EALG_AES_CCM_ICV16 16 +#define SADB_X_EALG_AES_GCM_ICV8 18 +#define SADB_X_EALG_AES_GCM_ICV12 19 +#define SADB_X_EALG_AES_GCM_ICV16 20 +#define SADB_X_EALG_CAMELLIACBC 22 +#define SADB_X_EALG_NULL_AES_GMAC 23 +#define SADB_X_EALG_SM4CBC 24 +#define SADB_EALG_MAX 253 /* last EALG */ +/* private allocations should use 249-255 (RFC2407) */ +#define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ +#define SADB_X_EALG_TWOFISHCBC 253 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ + +/* Compression algorithms */ +#define SADB_X_CALG_NONE 0 +#define SADB_X_CALG_OUI 1 +#define SADB_X_CALG_DEFLATE 2 +#define SADB_X_CALG_LZS 3 +#define SADB_X_CALG_LZJH 4 +#define SADB_X_CALG_MAX 4 + +/* Extension Header values */ +#define SADB_EXT_RESERVED 0 +#define SADB_EXT_SA 1 +#define SADB_EXT_LIFETIME_CURRENT 2 +#define SADB_EXT_LIFETIME_HARD 3 +#define SADB_EXT_LIFETIME_SOFT 4 +#define SADB_EXT_ADDRESS_SRC 5 +#define SADB_EXT_ADDRESS_DST 6 +#define SADB_EXT_ADDRESS_PROXY 7 +#define SADB_EXT_KEY_AUTH 8 +#define SADB_EXT_KEY_ENCRYPT 9 +#define SADB_EXT_IDENTITY_SRC 10 +#define SADB_EXT_IDENTITY_DST 11 +#define SADB_EXT_SENSITIVITY 12 +#define SADB_EXT_PROPOSAL 13 +#define SADB_EXT_SUPPORTED_AUTH 14 +#define SADB_EXT_SUPPORTED_ENCRYPT 15 +#define SADB_EXT_SPIRANGE 16 +#define SADB_X_EXT_KMPRIVATE 17 +#define SADB_X_EXT_POLICY 18 +#define SADB_X_EXT_SA2 19 +/* The next four entries are for setting up NAT Traversal */ +#define SADB_X_EXT_NAT_T_TYPE 20 +#define SADB_X_EXT_NAT_T_SPORT 21 +#define SADB_X_EXT_NAT_T_DPORT 22 +#define SADB_X_EXT_NAT_T_OA 23 +#define SADB_X_EXT_SEC_CTX 24 +/* Used with MIGRATE to pass @ to IKE for negotiation */ +#define SADB_X_EXT_KMADDRESS 25 +#define SADB_X_EXT_FILTER 26 +#define SADB_EXT_MAX 26 + +/* Identity Extension values */ +#define SADB_IDENTTYPE_RESERVED 0 +#define SADB_IDENTTYPE_PREFIX 1 +#define SADB_IDENTTYPE_FQDN 2 +#define SADB_IDENTTYPE_USERFQDN 3 +#define SADB_IDENTTYPE_MAX 3 + +#endif /* !(_LINUX_PFKEY2_H) */ diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h new file mode 100644 index 0000000..ea27703 --- /dev/null +++ b/include/uapi/linux/pkt_cls.h @@ -0,0 +1,773 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_CLS_H +#define __LINUX_PKT_CLS_H + +#include <linux/types.h> +#include <linux/pkt_sched.h> + +#define TC_COOKIE_MAX_SIZE 16 + +/* Action attributes */ +enum { + TCA_ACT_UNSPEC, + TCA_ACT_KIND, + TCA_ACT_OPTIONS, + TCA_ACT_INDEX, + TCA_ACT_STATS, + TCA_ACT_PAD, + TCA_ACT_COOKIE, + TCA_ACT_FLAGS, + TCA_ACT_HW_STATS, + TCA_ACT_USED_HW_STATS, + TCA_ACT_IN_HW_COUNT, + __TCA_ACT_MAX +}; + +/* See other TCA_ACT_FLAGS_ * flags in include/net/act_api.h. */ +#define TCA_ACT_FLAGS_NO_PERCPU_STATS (1 << 0) /* Don't use percpu allocator for + * actions stats. + */ +#define TCA_ACT_FLAGS_SKIP_HW (1 << 1) /* don't offload action to HW */ +#define TCA_ACT_FLAGS_SKIP_SW (1 << 2) /* don't use action in SW */ + +/* tca HW stats type + * When user does not pass the attribute, he does not care. + * It is the same as if he would pass the attribute with + * all supported bits set. + * In case no bits are set, user is not interested in getting any HW statistics. + */ +#define TCA_ACT_HW_STATS_IMMEDIATE (1 << 0) /* Means that in dump, user + * gets the current HW stats + * state from the device + * queried at the dump time. + */ +#define TCA_ACT_HW_STATS_DELAYED (1 << 1) /* Means that in dump, user gets + * HW stats that might be out of date + * for some time, maybe couple of + * seconds. This is the case when + * driver polls stats updates + * periodically or when it gets async + * stats update from the device. + */ + +#define TCA_ACT_MAX __TCA_ACT_MAX +#define TCA_OLD_COMPAT (TCA_ACT_MAX+1) +#define TCA_ACT_MAX_PRIO 32 +#define TCA_ACT_BIND 1 +#define TCA_ACT_NOBIND 0 +#define TCA_ACT_UNBIND 1 +#define TCA_ACT_NOUNBIND 0 +#define TCA_ACT_REPLACE 1 +#define TCA_ACT_NOREPLACE 0 + +#define TC_ACT_UNSPEC (-1) +#define TC_ACT_OK 0 +#define TC_ACT_RECLASSIFY 1 +#define TC_ACT_SHOT 2 +#define TC_ACT_PIPE 3 +#define TC_ACT_STOLEN 4 +#define TC_ACT_QUEUED 5 +#define TC_ACT_REPEAT 6 +#define TC_ACT_REDIRECT 7 +#define TC_ACT_TRAP 8 /* For hw path, this means "trap to cpu" + * and don't further process the frame + * in hardware. For sw path, this is + * equivalent of TC_ACT_STOLEN - drop + * the skb and act like everything + * is alright. + */ +#define TC_ACT_VALUE_MAX TC_ACT_TRAP + +/* There is a special kind of actions called "extended actions", + * which need a value parameter. These have a local opcode located in + * the highest nibble, starting from 1. The rest of the bits + * are used to carry the value. These two parts together make + * a combined opcode. + */ +#define __TC_ACT_EXT_SHIFT 28 +#define __TC_ACT_EXT(local) ((local) << __TC_ACT_EXT_SHIFT) +#define TC_ACT_EXT_VAL_MASK ((1 << __TC_ACT_EXT_SHIFT) - 1) +#define TC_ACT_EXT_OPCODE(combined) ((combined) & (~TC_ACT_EXT_VAL_MASK)) +#define TC_ACT_EXT_CMP(combined, opcode) (TC_ACT_EXT_OPCODE(combined) == opcode) + +#define TC_ACT_JUMP __TC_ACT_EXT(1) +#define TC_ACT_GOTO_CHAIN __TC_ACT_EXT(2) +#define TC_ACT_EXT_OPCODE_MAX TC_ACT_GOTO_CHAIN + +/* These macros are put here for binary compatibility with userspace apps that + * make use of them. For kernel code and new userspace apps, use the TCA_ID_* + * versions. + */ +#define TCA_ACT_GACT 5 +#define TCA_ACT_IPT 6 /* obsoleted, can be reused */ +#define TCA_ACT_PEDIT 7 +#define TCA_ACT_MIRRED 8 +#define TCA_ACT_NAT 9 +#define TCA_ACT_XT 10 +#define TCA_ACT_SKBEDIT 11 +#define TCA_ACT_VLAN 12 +#define TCA_ACT_BPF 13 +#define TCA_ACT_CONNMARK 14 +#define TCA_ACT_SKBMOD 15 +#define TCA_ACT_CSUM 16 +#define TCA_ACT_TUNNEL_KEY 17 +#define TCA_ACT_SIMP 22 +#define TCA_ACT_IFE 25 +#define TCA_ACT_SAMPLE 26 + +/* Action type identifiers*/ +enum tca_id { + TCA_ID_UNSPEC = 0, + TCA_ID_POLICE = 1, + TCA_ID_GACT = TCA_ACT_GACT, + TCA_ID_IPT = TCA_ACT_IPT, /* Obsoleted, can be reused */ + TCA_ID_PEDIT = TCA_ACT_PEDIT, + TCA_ID_MIRRED = TCA_ACT_MIRRED, + TCA_ID_NAT = TCA_ACT_NAT, + TCA_ID_XT = TCA_ACT_XT, + TCA_ID_SKBEDIT = TCA_ACT_SKBEDIT, + TCA_ID_VLAN = TCA_ACT_VLAN, + TCA_ID_BPF = TCA_ACT_BPF, + TCA_ID_CONNMARK = TCA_ACT_CONNMARK, + TCA_ID_SKBMOD = TCA_ACT_SKBMOD, + TCA_ID_CSUM = TCA_ACT_CSUM, + TCA_ID_TUNNEL_KEY = TCA_ACT_TUNNEL_KEY, + TCA_ID_SIMP = TCA_ACT_SIMP, + TCA_ID_IFE = TCA_ACT_IFE, + TCA_ID_SAMPLE = TCA_ACT_SAMPLE, + TCA_ID_CTINFO, + TCA_ID_MPLS, + TCA_ID_CT, + TCA_ID_GATE, + /* other actions go here */ + __TCA_ID_MAX = 255 +}; + +#define TCA_ID_MAX __TCA_ID_MAX + +struct tc_police { + __u32 index; + int action; +#define TC_POLICE_UNSPEC TC_ACT_UNSPEC +#define TC_POLICE_OK TC_ACT_OK +#define TC_POLICE_RECLASSIFY TC_ACT_RECLASSIFY +#define TC_POLICE_SHOT TC_ACT_SHOT +#define TC_POLICE_PIPE TC_ACT_PIPE + + __u32 limit; + __u32 burst; + __u32 mtu; + struct tc_ratespec rate; + struct tc_ratespec peakrate; + int refcnt; + int bindcnt; + __u32 capab; +}; + +struct tcf_t { + __u64 install; + __u64 lastuse; + __u64 expires; + __u64 firstuse; +}; + +struct tc_cnt { + int refcnt; + int bindcnt; +}; + +#define tc_gen \ + __u32 index; \ + __u32 capab; \ + int action; \ + int refcnt; \ + int bindcnt + +enum { + TCA_POLICE_UNSPEC, + TCA_POLICE_TBF, + TCA_POLICE_RATE, + TCA_POLICE_PEAKRATE, + TCA_POLICE_AVRATE, + TCA_POLICE_RESULT, + TCA_POLICE_TM, + TCA_POLICE_PAD, + TCA_POLICE_RATE64, + TCA_POLICE_PEAKRATE64, + TCA_POLICE_PKTRATE64, + TCA_POLICE_PKTBURST64, + __TCA_POLICE_MAX +#define TCA_POLICE_RESULT TCA_POLICE_RESULT +}; + +#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1) + +/* tca flags definitions */ +#define TCA_CLS_FLAGS_SKIP_HW (1 << 0) /* don't offload filter to HW */ +#define TCA_CLS_FLAGS_SKIP_SW (1 << 1) /* don't use filter in SW */ +#define TCA_CLS_FLAGS_IN_HW (1 << 2) /* filter is offloaded to HW */ +#define TCA_CLS_FLAGS_NOT_IN_HW (1 << 3) /* filter isn't offloaded to HW */ +#define TCA_CLS_FLAGS_VERBOSE (1 << 4) /* verbose logging */ + +/* U32 filters */ + +#define TC_U32_HTID(h) ((h)&0xFFF00000) +#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20) +#define TC_U32_HASH(h) (((h)>>12)&0xFF) +#define TC_U32_NODE(h) ((h)&0xFFF) +#define TC_U32_KEY(h) ((h)&0xFFFFF) +#define TC_U32_UNSPEC 0 +#define TC_U32_ROOT (0xFFF00000) + +enum { + TCA_U32_UNSPEC, + TCA_U32_CLASSID, + TCA_U32_HASH, + TCA_U32_LINK, + TCA_U32_DIVISOR, + TCA_U32_SEL, + TCA_U32_POLICE, + TCA_U32_ACT, + TCA_U32_INDEV, + TCA_U32_PCNT, + TCA_U32_MARK, + TCA_U32_FLAGS, + TCA_U32_PAD, + __TCA_U32_MAX +}; + +#define TCA_U32_MAX (__TCA_U32_MAX - 1) + +struct tc_u32_key { + __be32 mask; + __be32 val; + int off; + int offmask; +}; + +struct tc_u32_sel { + unsigned char flags; + unsigned char offshift; + unsigned char nkeys; + + __be16 offmask; + __u16 off; + short offoff; + + short hoff; + __be32 hmask; + struct tc_u32_key keys[]; +}; + +struct tc_u32_mark { + __u32 val; + __u32 mask; + __u32 success; +}; + +struct tc_u32_pcnt { + __u64 rcnt; + __u64 rhit; + __u64 kcnts[]; +}; + +/* Flags */ + +#define TC_U32_TERMINAL 1 +#define TC_U32_OFFSET 2 +#define TC_U32_VAROFFSET 4 +#define TC_U32_EAT 8 + +#define TC_U32_MAXDEPTH 8 + +/* ROUTE filter */ + +enum { + TCA_ROUTE4_UNSPEC, + TCA_ROUTE4_CLASSID, + TCA_ROUTE4_TO, + TCA_ROUTE4_FROM, + TCA_ROUTE4_IIF, + TCA_ROUTE4_POLICE, + TCA_ROUTE4_ACT, + __TCA_ROUTE4_MAX +}; + +#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1) + + +/* FW filter */ + +enum { + TCA_FW_UNSPEC, + TCA_FW_CLASSID, + TCA_FW_POLICE, + TCA_FW_INDEV, + TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */ + TCA_FW_MASK, + __TCA_FW_MAX +}; + +#define TCA_FW_MAX (__TCA_FW_MAX - 1) + +/* Flow filter */ + +enum { + FLOW_KEY_SRC, + FLOW_KEY_DST, + FLOW_KEY_PROTO, + FLOW_KEY_PROTO_SRC, + FLOW_KEY_PROTO_DST, + FLOW_KEY_IIF, + FLOW_KEY_PRIORITY, + FLOW_KEY_MARK, + FLOW_KEY_NFCT, + FLOW_KEY_NFCT_SRC, + FLOW_KEY_NFCT_DST, + FLOW_KEY_NFCT_PROTO_SRC, + FLOW_KEY_NFCT_PROTO_DST, + FLOW_KEY_RTCLASSID, + FLOW_KEY_SKUID, + FLOW_KEY_SKGID, + FLOW_KEY_VLAN_TAG, + FLOW_KEY_RXHASH, + __FLOW_KEY_MAX, +}; + +#define FLOW_KEY_MAX (__FLOW_KEY_MAX - 1) + +enum { + FLOW_MODE_MAP, + FLOW_MODE_HASH, +}; + +enum { + TCA_FLOW_UNSPEC, + TCA_FLOW_KEYS, + TCA_FLOW_MODE, + TCA_FLOW_BASECLASS, + TCA_FLOW_RSHIFT, + TCA_FLOW_ADDEND, + TCA_FLOW_MASK, + TCA_FLOW_XOR, + TCA_FLOW_DIVISOR, + TCA_FLOW_ACT, + TCA_FLOW_POLICE, + TCA_FLOW_EMATCHES, + TCA_FLOW_PERTURB, + __TCA_FLOW_MAX +}; + +#define TCA_FLOW_MAX (__TCA_FLOW_MAX - 1) + +/* Basic filter */ + +struct tc_basic_pcnt { + __u64 rcnt; + __u64 rhit; +}; + +enum { + TCA_BASIC_UNSPEC, + TCA_BASIC_CLASSID, + TCA_BASIC_EMATCHES, + TCA_BASIC_ACT, + TCA_BASIC_POLICE, + TCA_BASIC_PCNT, + TCA_BASIC_PAD, + __TCA_BASIC_MAX +}; + +#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1) + + +/* Cgroup classifier */ + +enum { + TCA_CGROUP_UNSPEC, + TCA_CGROUP_ACT, + TCA_CGROUP_POLICE, + TCA_CGROUP_EMATCHES, + __TCA_CGROUP_MAX, +}; + +#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) + +/* BPF classifier */ + +#define TCA_BPF_FLAG_ACT_DIRECT (1 << 0) + +enum { + TCA_BPF_UNSPEC, + TCA_BPF_ACT, + TCA_BPF_POLICE, + TCA_BPF_CLASSID, + TCA_BPF_OPS_LEN, + TCA_BPF_OPS, + TCA_BPF_FD, + TCA_BPF_NAME, + TCA_BPF_FLAGS, + TCA_BPF_FLAGS_GEN, + TCA_BPF_TAG, + TCA_BPF_ID, + __TCA_BPF_MAX, +}; + +#define TCA_BPF_MAX (__TCA_BPF_MAX - 1) + +/* Flower classifier */ + +enum { + TCA_FLOWER_UNSPEC, + TCA_FLOWER_CLASSID, + TCA_FLOWER_INDEV, + TCA_FLOWER_ACT, + TCA_FLOWER_KEY_ETH_DST, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_DST_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_SRC, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_SRC_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_TYPE, /* be16 */ + TCA_FLOWER_KEY_IP_PROTO, /* u8 */ + TCA_FLOWER_KEY_IPV4_SRC, /* be32 */ + TCA_FLOWER_KEY_IPV4_SRC_MASK, /* be32 */ + TCA_FLOWER_KEY_IPV4_DST, /* be32 */ + TCA_FLOWER_KEY_IPV4_DST_MASK, /* be32 */ + TCA_FLOWER_KEY_IPV6_SRC, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_SRC_MASK, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_DST, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_DST_MASK, /* struct in6_addr */ + TCA_FLOWER_KEY_TCP_SRC, /* be16 */ + TCA_FLOWER_KEY_TCP_DST, /* be16 */ + TCA_FLOWER_KEY_UDP_SRC, /* be16 */ + TCA_FLOWER_KEY_UDP_DST, /* be16 */ + + TCA_FLOWER_FLAGS, + TCA_FLOWER_KEY_VLAN_ID, /* be16 */ + TCA_FLOWER_KEY_VLAN_PRIO, /* u8 */ + TCA_FLOWER_KEY_VLAN_ETH_TYPE, /* be16 */ + + TCA_FLOWER_KEY_ENC_KEY_ID, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_SRC, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_SRC_MASK,/* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_DST, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_DST_MASK,/* be32 */ + TCA_FLOWER_KEY_ENC_IPV6_SRC, /* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_SRC_MASK,/* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_DST, /* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_DST_MASK,/* struct in6_addr */ + + TCA_FLOWER_KEY_TCP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_TCP_DST_MASK, /* be16 */ + TCA_FLOWER_KEY_UDP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_UDP_DST_MASK, /* be16 */ + TCA_FLOWER_KEY_SCTP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_SCTP_DST_MASK, /* be16 */ + + TCA_FLOWER_KEY_SCTP_SRC, /* be16 */ + TCA_FLOWER_KEY_SCTP_DST, /* be16 */ + + TCA_FLOWER_KEY_ENC_UDP_SRC_PORT, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_SRC_PORT_MASK, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_DST_PORT, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_DST_PORT_MASK, /* be16 */ + + TCA_FLOWER_KEY_FLAGS, /* be32 */ + TCA_FLOWER_KEY_FLAGS_MASK, /* be32 */ + + TCA_FLOWER_KEY_ICMPV4_CODE, /* u8 */ + TCA_FLOWER_KEY_ICMPV4_CODE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV4_TYPE, /* u8 */ + TCA_FLOWER_KEY_ICMPV4_TYPE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV6_CODE, /* u8 */ + TCA_FLOWER_KEY_ICMPV6_CODE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV6_TYPE, /* u8 */ + TCA_FLOWER_KEY_ICMPV6_TYPE_MASK,/* u8 */ + + TCA_FLOWER_KEY_ARP_SIP, /* be32 */ + TCA_FLOWER_KEY_ARP_SIP_MASK, /* be32 */ + TCA_FLOWER_KEY_ARP_TIP, /* be32 */ + TCA_FLOWER_KEY_ARP_TIP_MASK, /* be32 */ + TCA_FLOWER_KEY_ARP_OP, /* u8 */ + TCA_FLOWER_KEY_ARP_OP_MASK, /* u8 */ + TCA_FLOWER_KEY_ARP_SHA, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_SHA_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_THA, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_THA_MASK, /* ETH_ALEN */ + + TCA_FLOWER_KEY_MPLS_TTL, /* u8 - 8 bits */ + TCA_FLOWER_KEY_MPLS_BOS, /* u8 - 1 bit */ + TCA_FLOWER_KEY_MPLS_TC, /* u8 - 3 bits */ + TCA_FLOWER_KEY_MPLS_LABEL, /* be32 - 20 bits */ + + TCA_FLOWER_KEY_TCP_FLAGS, /* be16 */ + TCA_FLOWER_KEY_TCP_FLAGS_MASK, /* be16 */ + + TCA_FLOWER_KEY_IP_TOS, /* u8 */ + TCA_FLOWER_KEY_IP_TOS_MASK, /* u8 */ + TCA_FLOWER_KEY_IP_TTL, /* u8 */ + TCA_FLOWER_KEY_IP_TTL_MASK, /* u8 */ + + TCA_FLOWER_KEY_CVLAN_ID, /* be16 */ + TCA_FLOWER_KEY_CVLAN_PRIO, /* u8 */ + TCA_FLOWER_KEY_CVLAN_ETH_TYPE, /* be16 */ + + TCA_FLOWER_KEY_ENC_IP_TOS, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TOS_MASK, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TTL, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TTL_MASK, /* u8 */ + + TCA_FLOWER_KEY_ENC_OPTS, + TCA_FLOWER_KEY_ENC_OPTS_MASK, + + TCA_FLOWER_IN_HW_COUNT, + + TCA_FLOWER_KEY_PORT_SRC_MIN, /* be16 */ + TCA_FLOWER_KEY_PORT_SRC_MAX, /* be16 */ + TCA_FLOWER_KEY_PORT_DST_MIN, /* be16 */ + TCA_FLOWER_KEY_PORT_DST_MAX, /* be16 */ + + TCA_FLOWER_KEY_CT_STATE, /* u16 */ + TCA_FLOWER_KEY_CT_STATE_MASK, /* u16 */ + TCA_FLOWER_KEY_CT_ZONE, /* u16 */ + TCA_FLOWER_KEY_CT_ZONE_MASK, /* u16 */ + TCA_FLOWER_KEY_CT_MARK, /* u32 */ + TCA_FLOWER_KEY_CT_MARK_MASK, /* u32 */ + TCA_FLOWER_KEY_CT_LABELS, /* u128 */ + TCA_FLOWER_KEY_CT_LABELS_MASK, /* u128 */ + + TCA_FLOWER_KEY_MPLS_OPTS, + + TCA_FLOWER_KEY_HASH, /* u32 */ + TCA_FLOWER_KEY_HASH_MASK, /* u32 */ + + TCA_FLOWER_KEY_NUM_OF_VLANS, /* u8 */ + + TCA_FLOWER_KEY_PPPOE_SID, /* be16 */ + TCA_FLOWER_KEY_PPP_PROTO, /* be16 */ + + TCA_FLOWER_KEY_L2TPV3_SID, /* be32 */ + + TCA_FLOWER_L2_MISS, /* u8 */ + + TCA_FLOWER_KEY_CFM, /* nested */ + + TCA_FLOWER_KEY_SPI, /* be32 */ + TCA_FLOWER_KEY_SPI_MASK, /* be32 */ + + __TCA_FLOWER_MAX, +}; + +#define TCA_FLOWER_MAX (__TCA_FLOWER_MAX - 1) + +enum { + TCA_FLOWER_KEY_CT_FLAGS_NEW = 1 << 0, /* Beginning of a new connection. */ + TCA_FLOWER_KEY_CT_FLAGS_ESTABLISHED = 1 << 1, /* Part of an existing connection. */ + TCA_FLOWER_KEY_CT_FLAGS_RELATED = 1 << 2, /* Related to an established connection. */ + TCA_FLOWER_KEY_CT_FLAGS_TRACKED = 1 << 3, /* Conntrack has occurred. */ + TCA_FLOWER_KEY_CT_FLAGS_INVALID = 1 << 4, /* Conntrack is invalid. */ + TCA_FLOWER_KEY_CT_FLAGS_REPLY = 1 << 5, /* Packet is in the reply direction. */ + __TCA_FLOWER_KEY_CT_FLAGS_MAX, +}; + +enum { + TCA_FLOWER_KEY_ENC_OPTS_UNSPEC, + TCA_FLOWER_KEY_ENC_OPTS_GENEVE, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_GENEVE_ + * attributes + */ + TCA_FLOWER_KEY_ENC_OPTS_VXLAN, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_VXLAN_ + * attributes + */ + TCA_FLOWER_KEY_ENC_OPTS_ERSPAN, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_ERSPAN_ + * attributes + */ + TCA_FLOWER_KEY_ENC_OPTS_GTP, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_GTP_ + * attributes + */ + __TCA_FLOWER_KEY_ENC_OPTS_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPTS_MAX (__TCA_FLOWER_KEY_ENC_OPTS_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPT_GENEVE_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_GENEVE_CLASS, /* u16 */ + TCA_FLOWER_KEY_ENC_OPT_GENEVE_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_GENEVE_DATA, /* 4 to 128 bytes */ + + __TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPT_VXLAN_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_VXLAN_GBP, /* u32 */ + __TCA_FLOWER_KEY_ENC_OPT_VXLAN_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_VXLAN_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_VXLAN_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPT_ERSPAN_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_ERSPAN_VER, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_ERSPAN_INDEX, /* be32 */ + TCA_FLOWER_KEY_ENC_OPT_ERSPAN_DIR, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_ERSPAN_HWID, /* u8 */ + __TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPT_GTP_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_GTP_PDU_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_GTP_QFI, /* u8 */ + + __TCA_FLOWER_KEY_ENC_OPT_GTP_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_GTP_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1) + +enum { + TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC, + TCA_FLOWER_KEY_MPLS_OPTS_LSE, + __TCA_FLOWER_KEY_MPLS_OPTS_MAX, +}; + +#define TCA_FLOWER_KEY_MPLS_OPTS_MAX (__TCA_FLOWER_KEY_MPLS_OPTS_MAX - 1) + +enum { + TCA_FLOWER_KEY_MPLS_OPT_LSE_UNSPEC, + TCA_FLOWER_KEY_MPLS_OPT_LSE_DEPTH, + TCA_FLOWER_KEY_MPLS_OPT_LSE_TTL, + TCA_FLOWER_KEY_MPLS_OPT_LSE_BOS, + TCA_FLOWER_KEY_MPLS_OPT_LSE_TC, + TCA_FLOWER_KEY_MPLS_OPT_LSE_LABEL, + __TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX, +}; + +#define TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX \ + (__TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX - 1) + +enum { + TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0), + TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), +}; + +enum { + TCA_FLOWER_KEY_CFM_OPT_UNSPEC, + TCA_FLOWER_KEY_CFM_MD_LEVEL, + TCA_FLOWER_KEY_CFM_OPCODE, + __TCA_FLOWER_KEY_CFM_OPT_MAX, +}; + +#define TCA_FLOWER_KEY_CFM_OPT_MAX (__TCA_FLOWER_KEY_CFM_OPT_MAX - 1) + +#define TCA_FLOWER_MASK_FLAGS_RANGE (1 << 0) /* Range-based match */ + +/* Match-all classifier */ + +struct tc_matchall_pcnt { + __u64 rhit; +}; + +enum { + TCA_MATCHALL_UNSPEC, + TCA_MATCHALL_CLASSID, + TCA_MATCHALL_ACT, + TCA_MATCHALL_FLAGS, + TCA_MATCHALL_PCNT, + TCA_MATCHALL_PAD, + __TCA_MATCHALL_MAX, +}; + +#define TCA_MATCHALL_MAX (__TCA_MATCHALL_MAX - 1) + +/* Extended Matches */ + +struct tcf_ematch_tree_hdr { + __u16 nmatches; + __u16 progid; +}; + +enum { + TCA_EMATCH_TREE_UNSPEC, + TCA_EMATCH_TREE_HDR, + TCA_EMATCH_TREE_LIST, + __TCA_EMATCH_TREE_MAX +}; +#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1) + +struct tcf_ematch_hdr { + __u16 matchid; + __u16 kind; + __u16 flags; + __u16 pad; /* currently unused */ +}; + +/* 0 1 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 + * +-----------------------+-+-+---+ + * | Unused |S|I| R | + * +-----------------------+-+-+---+ + * + * R(2) ::= relation to next ematch + * where: 0 0 END (last ematch) + * 0 1 AND + * 1 0 OR + * 1 1 Unused (invalid) + * I(1) ::= invert result + * S(1) ::= simple payload + */ +#define TCF_EM_REL_END 0 +#define TCF_EM_REL_AND (1<<0) +#define TCF_EM_REL_OR (1<<1) +#define TCF_EM_INVERT (1<<2) +#define TCF_EM_SIMPLE (1<<3) + +#define TCF_EM_REL_MASK 3 +#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK) + +enum { + TCF_LAYER_LINK, + TCF_LAYER_NETWORK, + TCF_LAYER_TRANSPORT, + __TCF_LAYER_MAX +}; +#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1) + +/* Ematch type assignments + * 1..32767 Reserved for ematches inside kernel tree + * 32768..65535 Free to use, not reliable + */ +#define TCF_EM_CONTAINER 0 +#define TCF_EM_CMP 1 +#define TCF_EM_NBYTE 2 +#define TCF_EM_U32 3 +#define TCF_EM_META 4 +#define TCF_EM_TEXT 5 +#define TCF_EM_VLAN 6 +#define TCF_EM_CANID 7 +#define TCF_EM_IPSET 8 +#define TCF_EM_IPT 9 +#define TCF_EM_MAX 9 + +enum { + TCF_EM_PROG_TC +}; + +enum { + TCF_EM_OPND_EQ, + TCF_EM_OPND_GT, + TCF_EM_OPND_LT +}; + +#endif diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h new file mode 100644 index 0000000..a3cd0c2 --- /dev/null +++ b/include/uapi/linux/pkt_sched.h @@ -0,0 +1,1211 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_SCHED_H +#define __LINUX_PKT_SCHED_H + +#include <linux/const.h> +#include <linux/types.h> + +/* Logical priority bands not depending on specific packet scheduler. + Every scheduler will map them to real traffic classes, if it has + no more precise mechanism to classify packets. + + These numbers have no special meaning, though their coincidence + with obsolete IPv6 values is not occasional :-). New IPv6 drafts + preferred full anarchy inspired by diffserv group. + + Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy + class, actually, as rule it will be handled with more care than + filler or even bulk. + */ + +#define TC_PRIO_BESTEFFORT 0 +#define TC_PRIO_FILLER 1 +#define TC_PRIO_BULK 2 +#define TC_PRIO_INTERACTIVE_BULK 4 +#define TC_PRIO_INTERACTIVE 6 +#define TC_PRIO_CONTROL 7 + +#define TC_PRIO_MAX 15 + +/* Generic queue statistics, available for all the elements. + Particular schedulers may have also their private records. + */ + +struct tc_stats { + __u64 bytes; /* Number of enqueued bytes */ + __u32 packets; /* Number of enqueued packets */ + __u32 drops; /* Packets dropped because of lack of resources */ + __u32 overlimits; /* Number of throttle events when this + * flow goes out of allocated bandwidth */ + __u32 bps; /* Current flow byte rate */ + __u32 pps; /* Current flow packet rate */ + __u32 qlen; + __u32 backlog; +}; + +struct tc_estimator { + signed char interval; + unsigned char ewma_log; +}; + +/* "Handles" + --------- + + All the traffic control objects have 32bit identifiers, or "handles". + + They can be considered as opaque numbers from user API viewpoint, + but actually they always consist of two fields: major and + minor numbers, which are interpreted by kernel specially, + that may be used by applications, though not recommended. + + F.e. qdisc handles always have minor number equal to zero, + classes (or flows) have major equal to parent qdisc major, and + minor uniquely identifying class inside qdisc. + + Macros to manipulate handles: + */ + +#define TC_H_MAJ_MASK (0xFFFF0000U) +#define TC_H_MIN_MASK (0x0000FFFFU) +#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK) +#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK) +#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) + +#define TC_H_UNSPEC (0U) +#define TC_H_ROOT (0xFFFFFFFFU) +#define TC_H_INGRESS (0xFFFFFFF1U) +#define TC_H_CLSACT TC_H_INGRESS + +#define TC_H_MIN_PRIORITY 0xFFE0U +#define TC_H_MIN_INGRESS 0xFFF2U +#define TC_H_MIN_EGRESS 0xFFF3U + +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + +struct tc_ratespec { + unsigned char cell_log; + __u8 linklayer; /* lower 4 bits */ + unsigned short overhead; + short cell_align; + unsigned short mpu; + __u32 rate; +}; + +#define TC_RTAB_SIZE 1024 + +struct tc_sizespec { + unsigned char cell_log; + unsigned char size_log; + short cell_align; + int overhead; + unsigned int linklayer; + unsigned int mpu; + unsigned int mtu; + unsigned int tsize; +}; + +enum { + TCA_STAB_UNSPEC, + TCA_STAB_BASE, + TCA_STAB_DATA, + __TCA_STAB_MAX +}; + +#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) + +/* FIFO section */ + +struct tc_fifo_qopt { + __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */ +}; + +/* SKBPRIO section */ + +/* + * Priorities go from zero to (SKBPRIO_MAX_PRIORITY - 1). + * SKBPRIO_MAX_PRIORITY should be at least 64 in order for skbprio to be able + * to map one to one the DS field of IPV4 and IPV6 headers. + * Memory allocation grows linearly with SKBPRIO_MAX_PRIORITY. + */ + +#define SKBPRIO_MAX_PRIORITY 64 + +struct tc_skbprio_qopt { + __u32 limit; /* Queue length in packets. */ +}; + +/* PRIO section */ + +#define TCQ_PRIO_BANDS 16 +#define TCQ_MIN_PRIO_BANDS 2 + +struct tc_prio_qopt { + int bands; /* Number of bands */ + __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ +}; + +/* MULTIQ section */ + +struct tc_multiq_qopt { + __u16 bands; /* Number of bands */ + __u16 max_bands; /* Maximum number of queues */ +}; + +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { + /* TCQ_PLUG_BUFFER: Inset a plug into the queue and + * buffer any incoming packets + * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head + * to beginning of the next plug. + * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. + * Stop buffering packets until the next TCQ_PLUG_BUFFER + * command is received (just act as a pass-thru queue). + * TCQ_PLUG_LIMIT: Increase/decrease queue size + */ + int action; + __u32 limit; +}; + +/* TBF section */ + +struct tc_tbf_qopt { + struct tc_ratespec rate; + struct tc_ratespec peakrate; + __u32 limit; + __u32 buffer; + __u32 mtu; +}; + +enum { + TCA_TBF_UNSPEC, + TCA_TBF_PARMS, + TCA_TBF_RTAB, + TCA_TBF_PTAB, + TCA_TBF_RATE64, + TCA_TBF_PRATE64, + TCA_TBF_BURST, + TCA_TBF_PBURST, + TCA_TBF_PAD, + __TCA_TBF_MAX, +}; + +#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) + + +/* TEQL section */ + +/* TEQL does not require any parameters */ + +/* SFQ section */ + +struct tc_sfq_qopt { + unsigned quantum; /* Bytes per round allocated to flow */ + int perturb_period; /* Period of hash perturbation */ + __u32 limit; /* Maximal packets in queue */ + unsigned divisor; /* Hash divisor */ + unsigned flows; /* Maximal number of flows */ +}; + +struct tc_sfqred_stats { + __u32 prob_drop; /* Early drops, below max threshold */ + __u32 forced_drop; /* Early drops, after max threshold */ + __u32 prob_mark; /* Marked packets, below max threshold */ + __u32 forced_mark; /* Marked packets, after max threshold */ + __u32 prob_mark_head; /* Marked packets, below max threshold */ + __u32 forced_mark_head;/* Marked packets, after max threshold */ +}; + +struct tc_sfq_qopt_v1 { + struct tc_sfq_qopt v0; + unsigned int depth; /* max number of packets per flow */ + unsigned int headdrop; +/* SFQRED parameters */ + __u32 limit; /* HARD maximal flow queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; + __u32 max_P; /* probability, high resolution */ +/* SFQRED stats */ + struct tc_sfqred_stats stats; +}; + + +struct tc_sfq_xstats { + __s32 allot; +}; + +/* RED section */ + +enum { + TCA_RED_UNSPEC, + TCA_RED_PARMS, + TCA_RED_STAB, + TCA_RED_MAX_P, + TCA_RED_FLAGS, /* bitfield32 */ + TCA_RED_EARLY_DROP_BLOCK, /* u32 */ + TCA_RED_MARK_BLOCK, /* u32 */ + __TCA_RED_MAX, +}; + +#define TCA_RED_MAX (__TCA_RED_MAX - 1) + +struct tc_red_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + + /* This field can be used for flags that a RED-like qdisc has + * historically supported. E.g. when configuring RED, it can be used for + * ECN, HARDDROP and ADAPTATIVE. For SFQ it can be used for ECN, + * HARDDROP. Etc. Because this field has not been validated, and is + * copied back on dump, any bits besides those to which a given qdisc + * has assigned a historical meaning need to be considered for free use + * by userspace tools. + * + * Any further flags need to be passed differently, e.g. through an + * attribute (such as TCA_RED_FLAGS above). Such attribute should allow + * passing both recent and historic flags in one value. + */ + unsigned char flags; +#define TC_RED_ECN 1 +#define TC_RED_HARDDROP 2 +#define TC_RED_ADAPTATIVE 4 +#define TC_RED_NODROP 8 +}; + +#define TC_RED_HISTORIC_FLAGS (TC_RED_ECN | TC_RED_HARDDROP | TC_RED_ADAPTATIVE) + +struct tc_red_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ +}; + +/* GRED section */ + +#define MAX_DPs 16 + +enum { + TCA_GRED_UNSPEC, + TCA_GRED_PARMS, + TCA_GRED_STAB, + TCA_GRED_DPS, + TCA_GRED_MAX_P, + TCA_GRED_LIMIT, + TCA_GRED_VQ_LIST, /* nested TCA_GRED_VQ_ENTRY */ + __TCA_GRED_MAX, +}; + +#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) + +enum { + TCA_GRED_VQ_ENTRY_UNSPEC, + TCA_GRED_VQ_ENTRY, /* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { + TCA_GRED_VQ_UNSPEC, + TCA_GRED_VQ_PAD, + TCA_GRED_VQ_DP, /* u32 */ + TCA_GRED_VQ_STAT_BYTES, /* u64 */ + TCA_GRED_VQ_STAT_PACKETS, /* u32 */ + TCA_GRED_VQ_STAT_BACKLOG, /* u32 */ + TCA_GRED_VQ_STAT_PROB_DROP, /* u32 */ + TCA_GRED_VQ_STAT_PROB_MARK, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_DROP, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_MARK, /* u32 */ + TCA_GRED_VQ_STAT_PDROP, /* u32 */ + TCA_GRED_VQ_STAT_OTHER, /* u32 */ + TCA_GRED_VQ_FLAGS, /* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + +struct tc_gred_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + __u32 DP; /* up to 2^32 DPs */ + __u32 backlog; + __u32 qave; + __u32 forced; + __u32 early; + __u32 other; + __u32 pdrop; + __u8 Wlog; /* log(W) */ + __u8 Plog; /* log(P_max/(qth_max-qth_min)) */ + __u8 Scell_log; /* cell size for idle damping */ + __u8 prio; /* prio of this VQ */ + __u32 packets; + __u32 bytesin; +}; + +/* gred setup */ +struct tc_gred_sopt { + __u32 DPs; + __u32 def_DP; + __u8 grio; + __u8 flags; + __u16 pad1; +}; + +/* CHOKe section */ + +enum { + TCA_CHOKE_UNSPEC, + TCA_CHOKE_PARMS, + TCA_CHOKE_STAB, + TCA_CHOKE_MAX_P, + __TCA_CHOKE_MAX, +}; + +#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) + +struct tc_choke_qopt { + __u32 limit; /* Hard queue length (packets) */ + __u32 qth_min; /* Min average threshold (packets) */ + __u32 qth_max; /* Max average threshold (packets) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; /* see RED flags */ +}; + +struct tc_choke_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ + __u32 matched; /* Drops due to flow match */ +}; + +/* HTB section */ +#define TC_HTB_NUMPRIO 8 +#define TC_HTB_MAXDEPTH 8 +#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */ + +struct tc_htb_opt { + struct tc_ratespec rate; + struct tc_ratespec ceil; + __u32 buffer; + __u32 cbuffer; + __u32 quantum; + __u32 level; /* out only */ + __u32 prio; +}; +struct tc_htb_glob { + __u32 version; /* to match HTB/TC */ + __u32 rate2quantum; /* bps->quantum divisor */ + __u32 defcls; /* default class number */ + __u32 debug; /* debug flags */ + + /* stats */ + __u32 direct_pkts; /* count of non shaped packets */ +}; +enum { + TCA_HTB_UNSPEC, + TCA_HTB_PARMS, + TCA_HTB_INIT, + TCA_HTB_CTAB, + TCA_HTB_RTAB, + TCA_HTB_DIRECT_QLEN, + TCA_HTB_RATE64, + TCA_HTB_CEIL64, + TCA_HTB_PAD, + TCA_HTB_OFFLOAD, + __TCA_HTB_MAX, +}; + +#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) + +struct tc_htb_xstats { + __u32 lends; + __u32 borrows; + __u32 giants; /* unused since 'Make HTB scheduler work with TSO.' */ + __s32 tokens; + __s32 ctokens; +}; + +/* HFSC section */ + +struct tc_hfsc_qopt { + __u16 defcls; /* default class */ +}; + +struct tc_service_curve { + __u32 m1; /* slope of the first segment in bps */ + __u32 d; /* x-projection of the first segment in us */ + __u32 m2; /* slope of the second segment in bps */ +}; + +struct tc_hfsc_stats { + __u64 work; /* total work done */ + __u64 rtwork; /* work done by real-time criteria */ + __u32 period; /* current period */ + __u32 level; /* class level in hierarchy */ +}; + +enum { + TCA_HFSC_UNSPEC, + TCA_HFSC_RSC, + TCA_HFSC_FSC, + TCA_HFSC_USC, + __TCA_HFSC_MAX, +}; + +#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) + +/* Network emulator */ + +enum { + TCA_NETEM_UNSPEC, + TCA_NETEM_CORR, + TCA_NETEM_DELAY_DIST, + TCA_NETEM_REORDER, + TCA_NETEM_CORRUPT, + TCA_NETEM_LOSS, + TCA_NETEM_RATE, + TCA_NETEM_ECN, + TCA_NETEM_RATE64, + TCA_NETEM_PAD, + TCA_NETEM_LATENCY64, + TCA_NETEM_JITTER64, + TCA_NETEM_SLOT, + TCA_NETEM_SLOT_DIST, + TCA_NETEM_PRNG_SEED, + __TCA_NETEM_MAX, +}; + +#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) + +struct tc_netem_qopt { + __u32 latency; /* added delay (us) */ + __u32 limit; /* fifo limit (packets) */ + __u32 loss; /* random packet loss (0=none ~0=100%) */ + __u32 gap; /* re-ordering gap (0 for none) */ + __u32 duplicate; /* random packet dup (0=none ~0=100%) */ + __u32 jitter; /* random jitter in latency (us) */ +}; + +struct tc_netem_corr { + __u32 delay_corr; /* delay correlation */ + __u32 loss_corr; /* packet loss correlation */ + __u32 dup_corr; /* duplicate correlation */ +}; + +struct tc_netem_reorder { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_corrupt { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_rate { + __u32 rate; /* byte/s */ + __s32 packet_overhead; + __u32 cell_size; + __s32 cell_overhead; +}; + +struct tc_netem_slot { + __s64 min_delay; /* nsec */ + __s64 max_delay; + __s32 max_packets; + __s32 max_bytes; + __s64 dist_delay; /* nsec */ + __s64 dist_jitter; /* nsec */ +}; + +enum { + NETEM_LOSS_UNSPEC, + NETEM_LOSS_GI, /* General Intuitive - 4 state model */ + NETEM_LOSS_GE, /* Gilbert Elliot models */ + __NETEM_LOSS_MAX +}; +#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) + +/* State transition probabilities for 4 state model */ +struct tc_netem_gimodel { + __u32 p13; + __u32 p31; + __u32 p32; + __u32 p14; + __u32 p23; +}; + +/* Gilbert-Elliot models */ +struct tc_netem_gemodel { + __u32 p; + __u32 r; + __u32 h; + __u32 k1; +}; + +#define NETEM_DIST_SCALE 8192 +#define NETEM_DIST_MAX 16384 + +/* DRR */ + +enum { + TCA_DRR_UNSPEC, + TCA_DRR_QUANTUM, + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats { + __u32 deficit; +}; + +/* MQPRIO */ +#define TC_QOPT_BITMASK 15 +#define TC_QOPT_MAX_QUEUE 16 + +enum { + TC_MQPRIO_HW_OFFLOAD_NONE, /* no offload requested */ + TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */ + __TC_MQPRIO_HW_OFFLOAD_MAX +}; + +#define TC_MQPRIO_HW_OFFLOAD_MAX (__TC_MQPRIO_HW_OFFLOAD_MAX - 1) + +enum { + TC_MQPRIO_MODE_DCB, + TC_MQPRIO_MODE_CHANNEL, + __TC_MQPRIO_MODE_MAX +}; + +#define __TC_MQPRIO_MODE_MAX (__TC_MQPRIO_MODE_MAX - 1) + +enum { + TC_MQPRIO_SHAPER_DCB, + TC_MQPRIO_SHAPER_BW_RATE, /* Add new shapers below */ + __TC_MQPRIO_SHAPER_MAX +}; + +#define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) + +enum { + TC_FP_EXPRESS = 1, + TC_FP_PREEMPTIBLE = 2, +}; + +struct tc_mqprio_qopt { + __u8 num_tc; + __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; + __u8 hw; + __u16 count[TC_QOPT_MAX_QUEUE]; + __u16 offset[TC_QOPT_MAX_QUEUE]; +}; + +#define TC_MQPRIO_F_MODE 0x1 +#define TC_MQPRIO_F_SHAPER 0x2 +#define TC_MQPRIO_F_MIN_RATE 0x4 +#define TC_MQPRIO_F_MAX_RATE 0x8 + +enum { + TCA_MQPRIO_TC_ENTRY_UNSPEC, + TCA_MQPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_MQPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_MQPRIO_TC_ENTRY_CNT, + TCA_MQPRIO_TC_ENTRY_MAX = (__TCA_MQPRIO_TC_ENTRY_CNT - 1) +}; + +enum { + TCA_MQPRIO_UNSPEC, + TCA_MQPRIO_MODE, + TCA_MQPRIO_SHAPER, + TCA_MQPRIO_MIN_RATE64, + TCA_MQPRIO_MAX_RATE64, + TCA_MQPRIO_TC_ENTRY, + __TCA_MQPRIO_MAX, +}; + +#define TCA_MQPRIO_MAX (__TCA_MQPRIO_MAX - 1) + +/* SFB */ + +enum { + TCA_SFB_UNSPEC, + TCA_SFB_PARMS, + __TCA_SFB_MAX, +}; + +#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) + +/* + * Note: increment, decrement are Q0.16 fixed-point values. + */ +struct tc_sfb_qopt { + __u32 rehash_interval; /* delay between hash move, in ms */ + __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */ + __u32 max; /* max len of qlen_min */ + __u32 bin_size; /* maximum queue length per bin */ + __u32 increment; /* probability increment, (d1 in Blue) */ + __u32 decrement; /* probability decrement, (d2 in Blue) */ + __u32 limit; /* max SFB queue length */ + __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */ + __u32 penalty_burst; +}; + +struct tc_sfb_xstats { + __u32 earlydrop; + __u32 penaltydrop; + __u32 bucketdrop; + __u32 queuedrop; + __u32 childdrop; /* drops in child qdisc */ + __u32 marked; + __u32 maxqlen; + __u32 maxprob; + __u32 avgprob; +}; + +#define SFB_MAX_PROB 0xFFFF + +/* QFQ */ +enum { + TCA_QFQ_UNSPEC, + TCA_QFQ_WEIGHT, + TCA_QFQ_LMAX, + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { + __u32 weight; + __u32 lmax; +}; + +/* CODEL */ + +enum { + TCA_CODEL_UNSPEC, + TCA_CODEL_TARGET, + TCA_CODEL_LIMIT, + TCA_CODEL_INTERVAL, + TCA_CODEL_ECN, + TCA_CODEL_CE_THRESHOLD, + __TCA_CODEL_MAX +}; + +#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) + +struct tc_codel_xstats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 count; /* how many drops we've done since the last time we + * entered dropping state + */ + __u32 lastcount; /* count at entry to dropping state */ + __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ + __s32 drop_next; /* time to drop next packet */ + __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ + __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ + __u32 dropping; /* are we in dropping state ? */ + __u32 ce_mark; /* number of CE marked packets because of ce_threshold */ +}; + +/* FQ_CODEL */ + +#define FQ_CODEL_QUANTUM_MAX (1 << 20) + +enum { + TCA_FQ_CODEL_UNSPEC, + TCA_FQ_CODEL_TARGET, + TCA_FQ_CODEL_LIMIT, + TCA_FQ_CODEL_INTERVAL, + TCA_FQ_CODEL_ECN, + TCA_FQ_CODEL_FLOWS, + TCA_FQ_CODEL_QUANTUM, + TCA_FQ_CODEL_CE_THRESHOLD, + TCA_FQ_CODEL_DROP_BATCH_SIZE, + TCA_FQ_CODEL_MEMORY_LIMIT, + TCA_FQ_CODEL_CE_THRESHOLD_SELECTOR, + TCA_FQ_CODEL_CE_THRESHOLD_MASK, + __TCA_FQ_CODEL_MAX +}; + +#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) + +enum { + TCA_FQ_CODEL_XSTATS_QDISC, + TCA_FQ_CODEL_XSTATS_CLASS, +}; + +struct tc_fq_codel_qd_stats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 drop_overlimit; /* number of time max qdisc + * packet limit was hit + */ + __u32 ecn_mark; /* number of packets we ECN marked + * instead of being dropped + */ + __u32 new_flow_count; /* number of time packets + * created a 'new flow' + */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 ce_mark; /* packets above ce_threshold */ + __u32 memory_usage; /* in bytes */ + __u32 drop_overmemory; +}; + +struct tc_fq_codel_cl_stats { + __s32 deficit; + __u32 ldelay; /* in-queue delay seen by most recently + * dequeued packet + */ + __u32 count; + __u32 lastcount; + __u32 dropping; + __s32 drop_next; +}; + +struct tc_fq_codel_xstats { + __u32 type; + union { + struct tc_fq_codel_qd_stats qdisc_stats; + struct tc_fq_codel_cl_stats class_stats; + }; +}; + +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* obsolete, do not use */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + + TCA_FQ_FLOW_REFILL_DELAY, /* flow credit refill delay in usec */ + + TCA_FQ_ORPHAN_MASK, /* mask applied to orphaned skb hashes */ + + TCA_FQ_LOW_RATE_THRESHOLD, /* per packet delay under this rate */ + + TCA_FQ_CE_THRESHOLD, /* DCTCP-like CE-marking threshold */ + + TCA_FQ_TIMER_SLACK, /* timer slack */ + + TCA_FQ_HORIZON, /* time horizon in us */ + + TCA_FQ_HORIZON_DROP, /* drop packets beyond horizon, or cap their EDT */ + + TCA_FQ_PRIOMAP, /* prio2band */ + + TCA_FQ_WEIGHTS, /* Weights for each band */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +#define FQ_BANDS 3 +#define FQ_MIN_WEIGHT 16384 + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; /* obsolete */ + __u64 tcp_retrans; /* obsolete */ + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 unthrottle_latency_ns; + __u64 ce_mark; /* packets above ce_threshold */ + __u64 horizon_drops; + __u64 horizon_caps; + __u64 fastpath_packets; + __u64 band_drops[FQ_BANDS]; + __u32 band_pkt_count[FQ_BANDS]; + __u32 pad; +}; + +/* Heavy-Hitter Filter */ + +enum { + TCA_HHF_UNSPEC, + TCA_HHF_BACKLOG_LIMIT, + TCA_HHF_QUANTUM, + TCA_HHF_HH_FLOWS_LIMIT, + TCA_HHF_RESET_TIMEOUT, + TCA_HHF_ADMIT_BYTES, + TCA_HHF_EVICT_TIMEOUT, + TCA_HHF_NON_HH_WEIGHT, + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { + __u32 drop_overlimit; /* number of times max qdisc packet limit + * was hit + */ + __u32 hh_overlimit; /* number of times max heavy-hitters was hit */ + __u32 hh_tot_count; /* number of captured heavy-hitters so far */ + __u32 hh_cur_count; /* number of current heavy-hitters */ +}; + +/* PIE */ +enum { + TCA_PIE_UNSPEC, + TCA_PIE_TARGET, + TCA_PIE_LIMIT, + TCA_PIE_TUPDATE, + TCA_PIE_ALPHA, + TCA_PIE_BETA, + TCA_PIE_ECN, + TCA_PIE_BYTEMODE, + TCA_PIE_DQ_RATE_ESTIMATOR, + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { + __u64 prob; /* current probability */ + __u32 delay; /* current delay in ms */ + __u32 avg_dq_rate; /* current average dq_rate in + * bits/pie_time + */ + __u32 dq_rate_estimating; /* is avg_dq_rate being calculated? */ + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to pie_action */ + __u32 overlimit; /* dropped due to lack of space + * in queue + */ + __u32 maxq; /* maximum queue size */ + __u32 ecn_mark; /* packets marked with ecn*/ +}; + +/* FQ PIE */ +enum { + TCA_FQ_PIE_UNSPEC, + TCA_FQ_PIE_LIMIT, + TCA_FQ_PIE_FLOWS, + TCA_FQ_PIE_TARGET, + TCA_FQ_PIE_TUPDATE, + TCA_FQ_PIE_ALPHA, + TCA_FQ_PIE_BETA, + TCA_FQ_PIE_QUANTUM, + TCA_FQ_PIE_MEMORY_LIMIT, + TCA_FQ_PIE_ECN_PROB, + TCA_FQ_PIE_ECN, + TCA_FQ_PIE_BYTEMODE, + TCA_FQ_PIE_DQ_RATE_ESTIMATOR, + __TCA_FQ_PIE_MAX +}; +#define TCA_FQ_PIE_MAX (__TCA_FQ_PIE_MAX - 1) + +struct tc_fq_pie_xstats { + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to fq_pie_action */ + __u32 overlimit; /* dropped due to lack of space in queue */ + __u32 overmemory; /* dropped due to lack of memory in queue */ + __u32 ecn_mark; /* packets marked with ecn */ + __u32 new_flow_count; /* count of new flows created by packets */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 memory_usage; /* total memory across all queues */ +}; + +/* CBS */ +struct tc_cbs_qopt { + __u8 offload; + __u8 _pad[3]; + __s32 hicredit; + __s32 locredit; + __s32 idleslope; + __s32 sendslope; +}; + +enum { + TCA_CBS_UNSPEC, + TCA_CBS_PARMS, + __TCA_CBS_MAX, +}; + +#define TCA_CBS_MAX (__TCA_CBS_MAX - 1) + + +/* ETF */ +struct tc_etf_qopt { + __s32 delta; + __s32 clockid; + __u32 flags; +#define TC_ETF_DEADLINE_MODE_ON _BITUL(0) +#define TC_ETF_OFFLOAD_ON _BITUL(1) +#define TC_ETF_SKIP_SOCK_CHECK _BITUL(2) +}; + +enum { + TCA_ETF_UNSPEC, + TCA_ETF_PARMS, + __TCA_ETF_MAX, +}; + +#define TCA_ETF_MAX (__TCA_ETF_MAX - 1) + + +/* CAKE */ +enum { + TCA_CAKE_UNSPEC, + TCA_CAKE_PAD, + TCA_CAKE_BASE_RATE64, + TCA_CAKE_DIFFSERV_MODE, + TCA_CAKE_ATM, + TCA_CAKE_FLOW_MODE, + TCA_CAKE_OVERHEAD, + TCA_CAKE_RTT, + TCA_CAKE_TARGET, + TCA_CAKE_AUTORATE, + TCA_CAKE_MEMORY, + TCA_CAKE_NAT, + TCA_CAKE_RAW, + TCA_CAKE_WASH, + TCA_CAKE_MPU, + TCA_CAKE_INGRESS, + TCA_CAKE_ACK_FILTER, + TCA_CAKE_SPLIT_GSO, + TCA_CAKE_FWMARK, + __TCA_CAKE_MAX +}; +#define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1) + +enum { + __TCA_CAKE_STATS_INVALID, + TCA_CAKE_STATS_PAD, + TCA_CAKE_STATS_CAPACITY_ESTIMATE64, + TCA_CAKE_STATS_MEMORY_LIMIT, + TCA_CAKE_STATS_MEMORY_USED, + TCA_CAKE_STATS_AVG_NETOFF, + TCA_CAKE_STATS_MIN_NETLEN, + TCA_CAKE_STATS_MAX_NETLEN, + TCA_CAKE_STATS_MIN_ADJLEN, + TCA_CAKE_STATS_MAX_ADJLEN, + TCA_CAKE_STATS_TIN_STATS, + TCA_CAKE_STATS_DEFICIT, + TCA_CAKE_STATS_COBALT_COUNT, + TCA_CAKE_STATS_DROPPING, + TCA_CAKE_STATS_DROP_NEXT_US, + TCA_CAKE_STATS_P_DROP, + TCA_CAKE_STATS_BLUE_TIMER_US, + __TCA_CAKE_STATS_MAX +}; +#define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) + +enum { + __TCA_CAKE_TIN_STATS_INVALID, + TCA_CAKE_TIN_STATS_PAD, + TCA_CAKE_TIN_STATS_SENT_PACKETS, + TCA_CAKE_TIN_STATS_SENT_BYTES64, + TCA_CAKE_TIN_STATS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ECN_MARKED_PACKETS, + TCA_CAKE_TIN_STATS_ECN_MARKED_BYTES64, + TCA_CAKE_TIN_STATS_BACKLOG_PACKETS, + TCA_CAKE_TIN_STATS_BACKLOG_BYTES, + TCA_CAKE_TIN_STATS_THRESHOLD_RATE64, + TCA_CAKE_TIN_STATS_TARGET_US, + TCA_CAKE_TIN_STATS_INTERVAL_US, + TCA_CAKE_TIN_STATS_WAY_INDIRECT_HITS, + TCA_CAKE_TIN_STATS_WAY_MISSES, + TCA_CAKE_TIN_STATS_WAY_COLLISIONS, + TCA_CAKE_TIN_STATS_PEAK_DELAY_US, + TCA_CAKE_TIN_STATS_AVG_DELAY_US, + TCA_CAKE_TIN_STATS_BASE_DELAY_US, + TCA_CAKE_TIN_STATS_SPARSE_FLOWS, + TCA_CAKE_TIN_STATS_BULK_FLOWS, + TCA_CAKE_TIN_STATS_UNRESPONSIVE_FLOWS, + TCA_CAKE_TIN_STATS_MAX_SKBLEN, + TCA_CAKE_TIN_STATS_FLOW_QUANTUM, + __TCA_CAKE_TIN_STATS_MAX +}; +#define TCA_CAKE_TIN_STATS_MAX (__TCA_CAKE_TIN_STATS_MAX - 1) +#define TC_CAKE_MAX_TINS (8) + +enum { + CAKE_FLOW_NONE = 0, + CAKE_FLOW_SRC_IP, + CAKE_FLOW_DST_IP, + CAKE_FLOW_HOSTS, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_DST_IP */ + CAKE_FLOW_FLOWS, + CAKE_FLOW_DUAL_SRC, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_DUAL_DST, /* = CAKE_FLOW_DST_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_TRIPLE, /* = CAKE_FLOW_HOSTS | CAKE_FLOW_FLOWS */ + CAKE_FLOW_MAX, +}; + +enum { + CAKE_DIFFSERV_DIFFSERV3 = 0, + CAKE_DIFFSERV_DIFFSERV4, + CAKE_DIFFSERV_DIFFSERV8, + CAKE_DIFFSERV_BESTEFFORT, + CAKE_DIFFSERV_PRECEDENCE, + CAKE_DIFFSERV_MAX +}; + +enum { + CAKE_ACK_NONE = 0, + CAKE_ACK_FILTER, + CAKE_ACK_AGGRESSIVE, + CAKE_ACK_MAX +}; + +enum { + CAKE_ATM_NONE = 0, + CAKE_ATM_ATM, + CAKE_ATM_PTM, + CAKE_ATM_MAX +}; + + +/* TAPRIO */ +enum { + TC_TAPRIO_CMD_SET_GATES = 0x00, + TC_TAPRIO_CMD_SET_AND_HOLD = 0x01, + TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02, +}; + +enum { + TCA_TAPRIO_SCHED_ENTRY_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_CMD, /* u8 */ + TCA_TAPRIO_SCHED_ENTRY_GATE_MASK, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_INTERVAL, /* u32 */ + __TCA_TAPRIO_SCHED_ENTRY_MAX, +}; +#define TCA_TAPRIO_SCHED_ENTRY_MAX (__TCA_TAPRIO_SCHED_ENTRY_MAX - 1) + +/* The format for schedule entry list is: + * [TCA_TAPRIO_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_SCHED_ENTRY] + * [TCA_TAPRIO_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_SCHED_ENTRY_INTERVAL] + */ +enum { + TCA_TAPRIO_SCHED_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY, + __TCA_TAPRIO_SCHED_MAX, +}; + +#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) + +/* The format for the admin sched (dump only): + * [TCA_TAPRIO_SCHED_ADMIN_SCHED] + * [TCA_TAPRIO_ATTR_SCHED_BASE_TIME] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_INTERVAL] + */ + +#define TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST _BITUL(0) +#define TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD _BITUL(1) + +enum { + TCA_TAPRIO_TC_ENTRY_UNSPEC, + TCA_TAPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_TC_ENTRY_MAX_SDU, /* u32 */ + TCA_TAPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_TAPRIO_TC_ENTRY_CNT, + TCA_TAPRIO_TC_ENTRY_MAX = (__TCA_TAPRIO_TC_ENTRY_CNT - 1) +}; + +enum { + TCA_TAPRIO_OFFLOAD_STATS_PAD = 1, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_WINDOW_DROPS, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_TX_OVERRUNS, /* u64 */ + + /* add new constants above here */ + __TCA_TAPRIO_OFFLOAD_STATS_CNT, + TCA_TAPRIO_OFFLOAD_STATS_MAX = (__TCA_TAPRIO_OFFLOAD_STATS_CNT - 1) +}; + +enum { + TCA_TAPRIO_ATTR_UNSPEC, + TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ + TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */ + TCA_TAPRIO_ATTR_SCHED_BASE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */ + TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */ + TCA_TAPRIO_PAD, + TCA_TAPRIO_ATTR_ADMIN_SCHED, /* The admin sched, only used in dump */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION, /* s64 */ + TCA_TAPRIO_ATTR_FLAGS, /* u32 */ + TCA_TAPRIO_ATTR_TXTIME_DELAY, /* u32 */ + TCA_TAPRIO_ATTR_TC_ENTRY, /* nest */ + __TCA_TAPRIO_ATTR_MAX, +}; + +#define TCA_TAPRIO_ATTR_MAX (__TCA_TAPRIO_ATTR_MAX - 1) + +/* ETS */ + +#define TCQ_ETS_MAX_BANDS 16 + +enum { + TCA_ETS_UNSPEC, + TCA_ETS_NBANDS, /* u8 */ + TCA_ETS_NSTRICT, /* u8 */ + TCA_ETS_QUANTA, /* nested TCA_ETS_QUANTA_BAND */ + TCA_ETS_QUANTA_BAND, /* u32 */ + TCA_ETS_PRIOMAP, /* nested TCA_ETS_PRIOMAP_BAND */ + TCA_ETS_PRIOMAP_BAND, /* u8 */ + __TCA_ETS_MAX, +}; + +#define TCA_ETS_MAX (__TCA_ETS_MAX - 1) + +#endif diff --git a/include/uapi/linux/posix_types.h b/include/uapi/linux/posix_types.h new file mode 100644 index 0000000..9a7a740 --- /dev/null +++ b/include/uapi/linux/posix_types.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_POSIX_TYPES_H +#define _LINUX_POSIX_TYPES_H + +#include <linux/stddef.h> + +/* + * This allows for 1024 file descriptors: if NR_OPEN is ever grown + * beyond that you'll have to change this too. But 1024 fd's seem to be + * enough even for such "real" unices like OSF/1, so hopefully this is + * one limit that doesn't have to be changed [again]. + * + * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in + * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical + * place for them. Solved by having dummy defines in <sys/time.h>. + */ + +/* + * This macro may have been defined in <gnu/types.h>. But we always + * use the one here. + */ +#undef __FD_SETSIZE +#define __FD_SETSIZE 1024 + +typedef struct { + unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))]; +} __kernel_fd_set; + +/* Type of a signal handler. */ +typedef void (*__kernel_sighandler_t)(int); + +/* Type of a SYSV IPC key. */ +typedef int __kernel_key_t; +typedef int __kernel_mqd_t; + +#include <asm/posix_types.h> + +#endif /* _LINUX_POSIX_TYPES_H */ diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h new file mode 100644 index 0000000..b2cbb3b --- /dev/null +++ b/include/uapi/linux/ppp_defs.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * ppp_defs.h - PPP definitions. + * + * Copyright 1994-2000 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#include <linux/types.h> + +#ifndef _PPP_DEFS_H_ +#define _PPP_DEFS_H_ + +/* + * The basic PPP frame. + */ +#define PPP_HDRLEN 4 /* octets for standard ppp header */ +#define PPP_FCSLEN 2 /* octets for FCS */ +#define PPP_MRU 1500 /* default MRU = max length of info field */ + +#define PPP_ADDRESS(p) (((__u8 *)(p))[0]) +#define PPP_CONTROL(p) (((__u8 *)(p))[1]) +#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3]) + +/* + * Significant octet values. + */ +#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */ +#define PPP_UI 0x03 /* Unnumbered Information */ +#define PPP_FLAG 0x7e /* Flag Sequence */ +#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */ +#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */ + +/* + * Protocol field values. + */ +#define PPP_IP 0x21 /* Internet Protocol */ +#define PPP_AT 0x29 /* AppleTalk Protocol */ +#define PPP_IPX 0x2b /* IPX protocol */ +#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */ +#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */ +#define PPP_MP 0x3d /* Multilink protocol */ +#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */ +#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */ +#define PPP_COMP 0xfd /* compressed packet */ +#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */ +#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */ +#define PPP_IPCP 0x8021 /* IP Control Protocol */ +#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */ +#define PPP_IPXCP 0x802b /* IPX Control Protocol */ +#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */ +#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */ +#define PPP_CCP 0x80fd /* Compression Control Protocol */ +#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */ +#define PPP_LCP 0xc021 /* Link Control Protocol */ +#define PPP_PAP 0xc023 /* Password Authentication Protocol */ +#define PPP_LQR 0xc025 /* Link Quality Report protocol */ +#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */ +#define PPP_CBCP 0xc029 /* Callback Control Protocol */ + +/* + * Values for FCS calculations. + */ + +#define PPP_INITFCS 0xffff /* Initial FCS value */ +#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */ + + +/* + * Extended asyncmap - allows any character to be escaped. + */ + +typedef __u32 ext_accm[8]; + +/* + * What to do with network protocol (NP) packets. + */ +enum NPmode { + NPMODE_PASS, /* pass the packet through */ + NPMODE_DROP, /* silently drop the packet */ + NPMODE_ERROR, /* return an error */ + NPMODE_QUEUE /* save it up for later. */ +}; + +/* + * Statistics for LQRP and pppstats + */ +struct pppstat { + __u32 ppp_discards; /* # frames discarded */ + + __u32 ppp_ibytes; /* bytes received */ + __u32 ppp_ioctects; /* bytes received not in error */ + __u32 ppp_ipackets; /* packets received */ + __u32 ppp_ierrors; /* receive errors */ + __u32 ppp_ilqrs; /* # LQR frames received */ + + __u32 ppp_obytes; /* raw bytes sent */ + __u32 ppp_ooctects; /* frame bytes sent */ + __u32 ppp_opackets; /* packets sent */ + __u32 ppp_oerrors; /* transmit errors */ + __u32 ppp_olqrs; /* # LQR frames sent */ +}; + +struct vjstat { + __u32 vjs_packets; /* outbound packets */ + __u32 vjs_compressed; /* outbound compressed packets */ + __u32 vjs_searches; /* searches for connection state */ + __u32 vjs_misses; /* times couldn't find conn. state */ + __u32 vjs_uncompressedin; /* inbound uncompressed packets */ + __u32 vjs_compressedin; /* inbound compressed packets */ + __u32 vjs_errorin; /* inbound unknown type packets */ + __u32 vjs_tossed; /* inbound packets tossed because of error */ +}; + +struct compstat { + __u32 unc_bytes; /* total uncompressed bytes */ + __u32 unc_packets; /* total uncompressed packets */ + __u32 comp_bytes; /* compressed bytes */ + __u32 comp_packets; /* compressed packets */ + __u32 inc_bytes; /* incompressible bytes */ + __u32 inc_packets; /* incompressible packets */ + + /* the compression ratio is defined as in_count / bytes_out */ + __u32 in_count; /* Bytes received */ + __u32 bytes_out; /* Bytes transmitted */ + + double ratio; /* not computed in kernel. */ +}; + +struct ppp_stats { + struct pppstat p; /* basic PPP statistics */ + struct vjstat vj; /* VJ header compression statistics */ +}; + +struct ppp_comp_stats { + struct compstat c; /* packet compression statistics */ + struct compstat d; /* packet decompression statistics */ +}; + +/* + * The following structure records the time in seconds since + * the last NP packet was sent or received. + * + * Linux implements both 32-bit and 64-bit time_t versions + * for compatibility with user space that defines ppp_idle + * based on the libc time_t. + */ +struct ppp_idle { + __kernel_old_time_t xmit_idle; /* time since last NP packet sent */ + __kernel_old_time_t recv_idle; /* time since last NP packet received */ +}; + +struct ppp_idle32 { + __s32 xmit_idle; /* time since last NP packet sent */ + __s32 recv_idle; /* time since last NP packet received */ +}; + +struct ppp_idle64 { + __s64 xmit_idle; /* time since last NP packet sent */ + __s64 recv_idle; /* time since last NP packet received */ +}; + +#endif /* _PPP_DEFS_H_ */ diff --git a/include/uapi/linux/rose.h b/include/uapi/linux/rose.h new file mode 100644 index 0000000..19aa469 --- /dev/null +++ b/include/uapi/linux/rose.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * These are the public elements of the Linux kernel Rose implementation. + * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the + * definition of the ax25_address structure. + */ + +#ifndef ROSE_KERNEL_H +#define ROSE_KERNEL_H + +#include <linux/socket.h> +#include <linux/ax25.h> + +#define ROSE_MTU 251 + +#define ROSE_MAX_DIGIS 6 + +#define ROSE_DEFER 1 +#define ROSE_T1 2 +#define ROSE_T2 3 +#define ROSE_T3 4 +#define ROSE_IDLE 5 +#define ROSE_QBITINCL 6 +#define ROSE_HOLDBACK 7 + +#define SIOCRSGCAUSE (SIOCPROTOPRIVATE+0) +#define SIOCRSSCAUSE (SIOCPROTOPRIVATE+1) +#define SIOCRSL2CALL (SIOCPROTOPRIVATE+2) +#define SIOCRSSL2CALL (SIOCPROTOPRIVATE+2) +#define SIOCRSACCEPT (SIOCPROTOPRIVATE+3) +#define SIOCRSCLRRT (SIOCPROTOPRIVATE+4) +#define SIOCRSGL2CALL (SIOCPROTOPRIVATE+5) +#define SIOCRSGFACILITIES (SIOCPROTOPRIVATE+6) + +#define ROSE_DTE_ORIGINATED 0x00 +#define ROSE_NUMBER_BUSY 0x01 +#define ROSE_INVALID_FACILITY 0x03 +#define ROSE_NETWORK_CONGESTION 0x05 +#define ROSE_OUT_OF_ORDER 0x09 +#define ROSE_ACCESS_BARRED 0x0B +#define ROSE_NOT_OBTAINABLE 0x0D +#define ROSE_REMOTE_PROCEDURE 0x11 +#define ROSE_LOCAL_PROCEDURE 0x13 +#define ROSE_SHIP_ABSENT 0x39 + +typedef struct { + char rose_addr[5]; +} rose_address; + +struct sockaddr_rose { + __kernel_sa_family_t srose_family; + rose_address srose_addr; + ax25_address srose_call; + int srose_ndigis; + ax25_address srose_digi; +}; + +struct full_sockaddr_rose { + __kernel_sa_family_t srose_family; + rose_address srose_addr; + ax25_address srose_call; + unsigned int srose_ndigis; + ax25_address srose_digis[ROSE_MAX_DIGIS]; +}; + +struct rose_route_struct { + rose_address address; + unsigned short mask; + ax25_address neighbour; + char device[16]; + unsigned char ndigis; + ax25_address digipeaters[AX25_MAX_DIGIS]; +}; + +struct rose_cause_struct { + unsigned char cause; + unsigned char diagnostic; +}; + +struct rose_facilities_struct { + rose_address source_addr, dest_addr; + ax25_address source_call, dest_call; + unsigned char source_ndigis, dest_ndigis; + ax25_address source_digis[ROSE_MAX_DIGIS]; + ax25_address dest_digis[ROSE_MAX_DIGIS]; + unsigned int rand; + rose_address fail_addr; + ax25_address fail_call; +}; + +#endif diff --git a/include/uapi/linux/rpl.h b/include/uapi/linux/rpl.h new file mode 100644 index 0000000..42580b3 --- /dev/null +++ b/include/uapi/linux/rpl.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 RPL-SR implementation + * + * Author: + * (C) 2020 Alexander Aring <alex.aring@gmail.com> + */ + +#ifndef _LINUX_RPL_H +#define _LINUX_RPL_H + +#include <asm/byteorder.h> +#include <linux/types.h> +#include <linux/in6.h> + +/* + * RPL SR Header + */ +struct ipv6_rpl_sr_hdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 type; + __u8 segments_left; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u32 cmpre:4, + cmpri:4, + reserved:4, + pad:4, + reserved1:16; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u32 cmpri:4, + cmpre:4, + pad:4, + reserved:20; +#else +#error "Please fix <asm/byteorder.h>" +#endif + + union { + __DECLARE_FLEX_ARRAY(struct in6_addr, addr); + __DECLARE_FLEX_ARRAY(__u8, data); + } segments; +} __attribute__((packed)); + +#define rpl_segaddr segments.addr +#define rpl_segdata segments.data + +#endif diff --git a/include/uapi/linux/rpl_iptunnel.h b/include/uapi/linux/rpl_iptunnel.h new file mode 100644 index 0000000..c255b92 --- /dev/null +++ b/include/uapi/linux/rpl_iptunnel.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 RPL-SR implementation + * + * Author: + * (C) 2020 Alexander Aring <alex.aring@gmail.com> + */ + +#ifndef _LINUX_RPL_IPTUNNEL_H +#define _LINUX_RPL_IPTUNNEL_H + +enum { + RPL_IPTUNNEL_UNSPEC, + RPL_IPTUNNEL_SRH, + __RPL_IPTUNNEL_MAX, +}; +#define RPL_IPTUNNEL_MAX (__RPL_IPTUNNEL_MAX - 1) + +#define RPL_IPTUNNEL_SRH_SIZE(srh) (((srh)->hdrlen + 1) << 3) + +#endif diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h new file mode 100644 index 0000000..4e6c8e1 --- /dev/null +++ b/include/uapi/linux/rtnetlink.h @@ -0,0 +1,830 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_RTNETLINK_H +#define __LINUX_RTNETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> +#include <linux/if_link.h> +#include <linux/if_addr.h> +#include <linux/neighbour.h> + +/* rtnetlink families. Values up to 127 are reserved for real address + * families, values above 128 may be used arbitrarily. + */ +#define RTNL_FAMILY_IPMR 128 +#define RTNL_FAMILY_IP6MR 129 +#define RTNL_FAMILY_MAX 129 + +/**** + * Routing/neighbour discovery messages. + ****/ + +/* Types of messages */ + +enum { + RTM_BASE = 16, +#define RTM_BASE RTM_BASE + + RTM_NEWLINK = 16, +#define RTM_NEWLINK RTM_NEWLINK + RTM_DELLINK, +#define RTM_DELLINK RTM_DELLINK + RTM_GETLINK, +#define RTM_GETLINK RTM_GETLINK + RTM_SETLINK, +#define RTM_SETLINK RTM_SETLINK + + RTM_NEWADDR = 20, +#define RTM_NEWADDR RTM_NEWADDR + RTM_DELADDR, +#define RTM_DELADDR RTM_DELADDR + RTM_GETADDR, +#define RTM_GETADDR RTM_GETADDR + + RTM_NEWROUTE = 24, +#define RTM_NEWROUTE RTM_NEWROUTE + RTM_DELROUTE, +#define RTM_DELROUTE RTM_DELROUTE + RTM_GETROUTE, +#define RTM_GETROUTE RTM_GETROUTE + + RTM_NEWNEIGH = 28, +#define RTM_NEWNEIGH RTM_NEWNEIGH + RTM_DELNEIGH, +#define RTM_DELNEIGH RTM_DELNEIGH + RTM_GETNEIGH, +#define RTM_GETNEIGH RTM_GETNEIGH + + RTM_NEWRULE = 32, +#define RTM_NEWRULE RTM_NEWRULE + RTM_DELRULE, +#define RTM_DELRULE RTM_DELRULE + RTM_GETRULE, +#define RTM_GETRULE RTM_GETRULE + + RTM_NEWQDISC = 36, +#define RTM_NEWQDISC RTM_NEWQDISC + RTM_DELQDISC, +#define RTM_DELQDISC RTM_DELQDISC + RTM_GETQDISC, +#define RTM_GETQDISC RTM_GETQDISC + + RTM_NEWTCLASS = 40, +#define RTM_NEWTCLASS RTM_NEWTCLASS + RTM_DELTCLASS, +#define RTM_DELTCLASS RTM_DELTCLASS + RTM_GETTCLASS, +#define RTM_GETTCLASS RTM_GETTCLASS + + RTM_NEWTFILTER = 44, +#define RTM_NEWTFILTER RTM_NEWTFILTER + RTM_DELTFILTER, +#define RTM_DELTFILTER RTM_DELTFILTER + RTM_GETTFILTER, +#define RTM_GETTFILTER RTM_GETTFILTER + + RTM_NEWACTION = 48, +#define RTM_NEWACTION RTM_NEWACTION + RTM_DELACTION, +#define RTM_DELACTION RTM_DELACTION + RTM_GETACTION, +#define RTM_GETACTION RTM_GETACTION + + RTM_NEWPREFIX = 52, +#define RTM_NEWPREFIX RTM_NEWPREFIX + + RTM_GETMULTICAST = 58, +#define RTM_GETMULTICAST RTM_GETMULTICAST + + RTM_GETANYCAST = 62, +#define RTM_GETANYCAST RTM_GETANYCAST + + RTM_NEWNEIGHTBL = 64, +#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL + RTM_GETNEIGHTBL = 66, +#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL + RTM_SETNEIGHTBL, +#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL + + RTM_NEWNDUSEROPT = 68, +#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT + + RTM_NEWADDRLABEL = 72, +#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL + RTM_DELADDRLABEL, +#define RTM_DELADDRLABEL RTM_DELADDRLABEL + RTM_GETADDRLABEL, +#define RTM_GETADDRLABEL RTM_GETADDRLABEL + + RTM_GETDCB = 78, +#define RTM_GETDCB RTM_GETDCB + RTM_SETDCB, +#define RTM_SETDCB RTM_SETDCB + + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_DELNETCONF, +#define RTM_DELNETCONF RTM_DELNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + + RTM_NEWNSID = 88, +#define RTM_NEWNSID RTM_NEWNSID + RTM_DELNSID = 89, +#define RTM_DELNSID RTM_DELNSID + RTM_GETNSID = 90, +#define RTM_GETNSID RTM_GETNSID + + RTM_NEWSTATS = 92, +#define RTM_NEWSTATS RTM_NEWSTATS + RTM_GETSTATS = 94, +#define RTM_GETSTATS RTM_GETSTATS + RTM_SETSTATS, +#define RTM_SETSTATS RTM_SETSTATS + + RTM_NEWCACHEREPORT = 96, +#define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT + + RTM_NEWCHAIN = 100, +#define RTM_NEWCHAIN RTM_NEWCHAIN + RTM_DELCHAIN, +#define RTM_DELCHAIN RTM_DELCHAIN + RTM_GETCHAIN, +#define RTM_GETCHAIN RTM_GETCHAIN + + RTM_NEWNEXTHOP = 104, +#define RTM_NEWNEXTHOP RTM_NEWNEXTHOP + RTM_DELNEXTHOP, +#define RTM_DELNEXTHOP RTM_DELNEXTHOP + RTM_GETNEXTHOP, +#define RTM_GETNEXTHOP RTM_GETNEXTHOP + + RTM_NEWLINKPROP = 108, +#define RTM_NEWLINKPROP RTM_NEWLINKPROP + RTM_DELLINKPROP, +#define RTM_DELLINKPROP RTM_DELLINKPROP + RTM_GETLINKPROP, +#define RTM_GETLINKPROP RTM_GETLINKPROP + + RTM_NEWVLAN = 112, +#define RTM_NEWNVLAN RTM_NEWVLAN + RTM_DELVLAN, +#define RTM_DELVLAN RTM_DELVLAN + RTM_GETVLAN, +#define RTM_GETVLAN RTM_GETVLAN + + RTM_NEWNEXTHOPBUCKET = 116, +#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET + RTM_DELNEXTHOPBUCKET, +#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET + RTM_GETNEXTHOPBUCKET, +#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET + + RTM_NEWTUNNEL = 120, +#define RTM_NEWTUNNEL RTM_NEWTUNNEL + RTM_DELTUNNEL, +#define RTM_DELTUNNEL RTM_DELTUNNEL + RTM_GETTUNNEL, +#define RTM_GETTUNNEL RTM_GETTUNNEL + + __RTM_MAX, +#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) +}; + +#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) +#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) +#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) + +/* + Generic structure for encapsulation of optional route information. + It is reminiscent of sockaddr, but with sa_family replaced + with attribute type. + */ + +struct rtattr { + unsigned short rta_len; + unsigned short rta_type; +}; + +/* Macros to handle rtattributes */ + +#define RTA_ALIGNTO 4U +#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) +#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ + (rta)->rta_len >= sizeof(struct rtattr) && \ + (rta)->rta_len <= (len)) +#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ + (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) +#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) +#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) +#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) +#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) + + + + +/****************************************************************************** + * Definitions used in routing table administration. + ****/ + +struct rtmsg { + unsigned char rtm_family; + unsigned char rtm_dst_len; + unsigned char rtm_src_len; + unsigned char rtm_tos; + + unsigned char rtm_table; /* Routing table id */ + unsigned char rtm_protocol; /* Routing protocol; see below */ + unsigned char rtm_scope; /* See below */ + unsigned char rtm_type; /* See below */ + + unsigned rtm_flags; +}; + +/* rtm_type */ + +enum { + RTN_UNSPEC, + RTN_UNICAST, /* Gateway or direct route */ + RTN_LOCAL, /* Accept locally */ + RTN_BROADCAST, /* Accept locally as broadcast, + send as broadcast */ + RTN_ANYCAST, /* Accept locally as broadcast, + but send as unicast */ + RTN_MULTICAST, /* Multicast route */ + RTN_BLACKHOLE, /* Drop */ + RTN_UNREACHABLE, /* Destination is unreachable */ + RTN_PROHIBIT, /* Administratively prohibited */ + RTN_THROW, /* Not in this table */ + RTN_NAT, /* Translate this address */ + RTN_XRESOLVE, /* Use external resolver */ + __RTN_MAX +}; + +#define RTN_MAX (__RTN_MAX - 1) + + +/* rtm_protocol */ + +#define RTPROT_UNSPEC 0 +#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; + not used by current IPv4 */ +#define RTPROT_KERNEL 2 /* Route installed by kernel */ +#define RTPROT_BOOT 3 /* Route installed during boot */ +#define RTPROT_STATIC 4 /* Route installed by administrator */ + +/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; + they are just passed from user and back as is. + It will be used by hypothetical multiple routing daemons. + Note that protocol values should be standardized in order to + avoid conflicts. + */ + +#define RTPROT_GATED 8 /* Apparently, GateD */ +#define RTPROT_RA 9 /* RDISC/ND router advertisements */ +#define RTPROT_MRT 10 /* Merit MRT */ +#define RTPROT_ZEBRA 11 /* Zebra */ +#define RTPROT_BIRD 12 /* BIRD */ +#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ +#define RTPROT_XORP 14 /* XORP */ +#define RTPROT_NTK 15 /* Netsukuku */ +#define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ +#define RTPROT_KEEPALIVED 18 /* Keepalived daemon */ +#define RTPROT_BABEL 42 /* Babel daemon */ +#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */ +#define RTPROT_BGP 186 /* BGP Routes */ +#define RTPROT_ISIS 187 /* ISIS Routes */ +#define RTPROT_OSPF 188 /* OSPF Routes */ +#define RTPROT_RIP 189 /* RIP Routes */ +#define RTPROT_EIGRP 192 /* EIGRP Routes */ + +/* rtm_scope + + Really it is not scope, but sort of distance to the destination. + NOWHERE are reserved for not existing destinations, HOST is our + local addresses, LINK are destinations, located on directly attached + link and UNIVERSE is everywhere in the Universe. + + Intermediate values are also possible f.e. interior routes + could be assigned a value between UNIVERSE and LINK. +*/ + +enum rt_scope_t { + RT_SCOPE_UNIVERSE=0, +/* User defined values */ + RT_SCOPE_SITE=200, + RT_SCOPE_LINK=253, + RT_SCOPE_HOST=254, + RT_SCOPE_NOWHERE=255 +}; + +/* rtm_flags */ + +#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ +#define RTM_F_CLONED 0x200 /* This route is cloned */ +#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ +#define RTM_F_PREFIX 0x800 /* Prefix addresses */ +#define RTM_F_LOOKUP_TABLE 0x1000 /* set rtm_table to FIB lookup result */ +#define RTM_F_FIB_MATCH 0x2000 /* return full fib lookup match */ +#define RTM_F_OFFLOAD 0x4000 /* route is offloaded */ +#define RTM_F_TRAP 0x8000 /* route is trapping packets */ +#define RTM_F_OFFLOAD_FAILED 0x20000000 /* route offload failed, this value + * is chosen to avoid conflicts with + * other flags defined in + * include/uapi/linux/ipv6_route.h + */ + +/* Reserved table identifiers */ + +enum rt_class_t { + RT_TABLE_UNSPEC=0, +/* User defined values */ + RT_TABLE_COMPAT=252, + RT_TABLE_DEFAULT=253, + RT_TABLE_MAIN=254, + RT_TABLE_LOCAL=255, + RT_TABLE_MAX=0xFFFFFFFF +}; + + +/* Routing message attributes */ + +enum rtattr_type_t { + RTA_UNSPEC, + RTA_DST, + RTA_SRC, + RTA_IIF, + RTA_OIF, + RTA_GATEWAY, + RTA_PRIORITY, + RTA_PREFSRC, + RTA_METRICS, + RTA_MULTIPATH, + RTA_PROTOINFO, /* no longer used */ + RTA_FLOW, + RTA_CACHEINFO, + RTA_SESSION, /* no longer used */ + RTA_MP_ALGO, /* no longer used */ + RTA_TABLE, + RTA_MARK, + RTA_MFC_STATS, + RTA_VIA, + RTA_NEWDST, + RTA_PREF, + RTA_ENCAP_TYPE, + RTA_ENCAP, + RTA_EXPIRES, + RTA_PAD, + RTA_UID, + RTA_TTL_PROPAGATE, + RTA_IP_PROTO, + RTA_SPORT, + RTA_DPORT, + RTA_NH_ID, + __RTA_MAX +}; + +#define RTA_MAX (__RTA_MAX - 1) + +#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) +#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) + +/* RTM_MULTIPATH --- array of struct rtnexthop. + * + * "struct rtnexthop" describes all necessary nexthop information, + * i.e. parameters of path to a destination via this nexthop. + * + * At the moment it is impossible to set different prefsrc, mtu, window + * and rtt for different paths from multipath. + */ + +struct rtnexthop { + unsigned short rtnh_len; + unsigned char rtnh_flags; + unsigned char rtnh_hops; + int rtnh_ifindex; +}; + +/* rtnh_flags */ + +#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ +#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ +#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ +#define RTNH_F_OFFLOAD 8 /* Nexthop is offloaded */ +#define RTNH_F_LINKDOWN 16 /* carrier-down on nexthop */ +#define RTNH_F_UNRESOLVED 32 /* The entry is unresolved (ipmr) */ +#define RTNH_F_TRAP 64 /* Nexthop is trapping packets */ + +#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | \ + RTNH_F_OFFLOAD | RTNH_F_TRAP) + +/* Macros to handle hexthops */ + +#define RTNH_ALIGNTO 4 +#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) +#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ + ((int)(rtnh)->rtnh_len) <= (len)) +#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) +#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) +#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) +#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) + +/* RTA_VIA */ +struct rtvia { + __kernel_sa_family_t rtvia_family; + __u8 rtvia_addr[]; +}; + +/* RTM_CACHEINFO */ + +struct rta_cacheinfo { + __u32 rta_clntref; + __u32 rta_lastuse; + __s32 rta_expires; + __u32 rta_error; + __u32 rta_used; + +#define RTNETLINK_HAVE_PEERINFO 1 + __u32 rta_id; + __u32 rta_ts; + __u32 rta_tsage; +}; + +/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ + +enum { + RTAX_UNSPEC, +#define RTAX_UNSPEC RTAX_UNSPEC + RTAX_LOCK, +#define RTAX_LOCK RTAX_LOCK + RTAX_MTU, +#define RTAX_MTU RTAX_MTU + RTAX_WINDOW, +#define RTAX_WINDOW RTAX_WINDOW + RTAX_RTT, +#define RTAX_RTT RTAX_RTT + RTAX_RTTVAR, +#define RTAX_RTTVAR RTAX_RTTVAR + RTAX_SSTHRESH, +#define RTAX_SSTHRESH RTAX_SSTHRESH + RTAX_CWND, +#define RTAX_CWND RTAX_CWND + RTAX_ADVMSS, +#define RTAX_ADVMSS RTAX_ADVMSS + RTAX_REORDERING, +#define RTAX_REORDERING RTAX_REORDERING + RTAX_HOPLIMIT, +#define RTAX_HOPLIMIT RTAX_HOPLIMIT + RTAX_INITCWND, +#define RTAX_INITCWND RTAX_INITCWND + RTAX_FEATURES, +#define RTAX_FEATURES RTAX_FEATURES + RTAX_RTO_MIN, +#define RTAX_RTO_MIN RTAX_RTO_MIN + RTAX_INITRWND, +#define RTAX_INITRWND RTAX_INITRWND + RTAX_QUICKACK, +#define RTAX_QUICKACK RTAX_QUICKACK + RTAX_CC_ALGO, +#define RTAX_CC_ALGO RTAX_CC_ALGO + RTAX_FASTOPEN_NO_COOKIE, +#define RTAX_FASTOPEN_NO_COOKIE RTAX_FASTOPEN_NO_COOKIE + __RTAX_MAX +}; + +#define RTAX_MAX (__RTAX_MAX - 1) + +#define RTAX_FEATURE_ECN (1 << 0) +#define RTAX_FEATURE_SACK (1 << 1) /* unused */ +#define RTAX_FEATURE_TIMESTAMP (1 << 2) /* unused */ +#define RTAX_FEATURE_ALLFRAG (1 << 3) /* unused */ +#define RTAX_FEATURE_TCP_USEC_TS (1 << 4) + +#define RTAX_FEATURE_MASK (RTAX_FEATURE_ECN | \ + RTAX_FEATURE_SACK | \ + RTAX_FEATURE_TIMESTAMP | \ + RTAX_FEATURE_ALLFRAG | \ + RTAX_FEATURE_TCP_USEC_TS) + +struct rta_session { + __u8 proto; + __u8 pad1; + __u16 pad2; + + union { + struct { + __u16 sport; + __u16 dport; + } ports; + + struct { + __u8 type; + __u8 code; + __u16 ident; + } icmpt; + + __u32 spi; + } u; +}; + +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + +/**** + * General form of address family dependent message. + ****/ + +struct rtgenmsg { + unsigned char rtgen_family; +}; + +/***************************************************************** + * Link layer specific messages. + ****/ + +/* struct ifinfomsg + * passes link level specific information, not dependent + * on network protocol. + */ + +struct ifinfomsg { + unsigned char ifi_family; + unsigned char __ifi_pad; + unsigned short ifi_type; /* ARPHRD_* */ + int ifi_index; /* Link index */ + unsigned ifi_flags; /* IFF_* flags */ + unsigned ifi_change; /* IFF_* change mask */ +}; + +/******************************************************************** + * prefix information + ****/ + +struct prefixmsg { + unsigned char prefix_family; + unsigned char prefix_pad1; + unsigned short prefix_pad2; + int prefix_ifindex; + unsigned char prefix_type; + unsigned char prefix_len; + unsigned char prefix_flags; + unsigned char prefix_pad3; +}; + +enum +{ + PREFIX_UNSPEC, + PREFIX_ADDRESS, + PREFIX_CACHEINFO, + __PREFIX_MAX +}; + +#define PREFIX_MAX (__PREFIX_MAX - 1) + +struct prefix_cacheinfo { + __u32 preferred_time; + __u32 valid_time; +}; + + +/***************************************************************** + * Traffic control messages. + ****/ + +struct tcmsg { + unsigned char tcm_family; + unsigned char tcm__pad1; + unsigned short tcm__pad2; + int tcm_ifindex; + __u32 tcm_handle; + __u32 tcm_parent; +/* tcm_block_index is used instead of tcm_parent + * in case tcm_ifindex == TCM_IFINDEX_MAGIC_BLOCK + */ +#define tcm_block_index tcm_parent + __u32 tcm_info; +}; + +/* For manipulation of filters in shared block, tcm_ifindex is set to + * TCM_IFINDEX_MAGIC_BLOCK, and tcm_parent is aliased to tcm_block_index + * which is the block index. + */ +#define TCM_IFINDEX_MAGIC_BLOCK (0xFFFFFFFFU) + +enum { + TCA_UNSPEC, + TCA_KIND, + TCA_OPTIONS, + TCA_STATS, + TCA_XSTATS, + TCA_RATE, + TCA_FCNT, + TCA_STATS2, + TCA_STAB, + TCA_PAD, + TCA_DUMP_INVISIBLE, + TCA_CHAIN, + TCA_HW_OFFLOAD, + TCA_INGRESS_BLOCK, + TCA_EGRESS_BLOCK, + TCA_DUMP_FLAGS, + TCA_EXT_WARN_MSG, + __TCA_MAX +}; + +#define TCA_MAX (__TCA_MAX - 1) + +#define TCA_DUMP_FLAGS_TERSE (1 << 0) /* Means that in dump user gets only basic + * data necessary to identify the objects + * (handle, cookie, etc.) and stats. + */ + +#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) +#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) + +/******************************************************************** + * Neighbor Discovery userland options + ****/ + +struct nduseroptmsg { + unsigned char nduseropt_family; + unsigned char nduseropt_pad1; + unsigned short nduseropt_opts_len; /* Total length of options */ + int nduseropt_ifindex; + __u8 nduseropt_icmp_type; + __u8 nduseropt_icmp_code; + unsigned short nduseropt_pad2; + unsigned int nduseropt_pad3; + /* Followed by one or more ND options */ +}; + +enum { + NDUSEROPT_UNSPEC, + NDUSEROPT_SRCADDR, + __NDUSEROPT_MAX +}; + +#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) + +/* RTnetlink multicast groups - backwards compatibility for userspace */ +#define RTMGRP_LINK 1 +#define RTMGRP_NOTIFY 2 +#define RTMGRP_NEIGH 4 +#define RTMGRP_TC 8 + +#define RTMGRP_IPV4_IFADDR 0x10 +#define RTMGRP_IPV4_MROUTE 0x20 +#define RTMGRP_IPV4_ROUTE 0x40 +#define RTMGRP_IPV4_RULE 0x80 + +#define RTMGRP_IPV6_IFADDR 0x100 +#define RTMGRP_IPV6_MROUTE 0x200 +#define RTMGRP_IPV6_ROUTE 0x400 +#define RTMGRP_IPV6_IFINFO 0x800 + +#define RTMGRP_DECnet_IFADDR 0x1000 +#define RTMGRP_DECnet_ROUTE 0x4000 + +#define RTMGRP_IPV6_PREFIX 0x20000 + +/* RTnetlink multicast groups */ +enum rtnetlink_groups { + RTNLGRP_NONE, +#define RTNLGRP_NONE RTNLGRP_NONE + RTNLGRP_LINK, +#define RTNLGRP_LINK RTNLGRP_LINK + RTNLGRP_NOTIFY, +#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY + RTNLGRP_NEIGH, +#define RTNLGRP_NEIGH RTNLGRP_NEIGH + RTNLGRP_TC, +#define RTNLGRP_TC RTNLGRP_TC + RTNLGRP_IPV4_IFADDR, +#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR + RTNLGRP_IPV4_MROUTE, +#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE + RTNLGRP_IPV4_ROUTE, +#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE + RTNLGRP_IPV4_RULE, +#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE + RTNLGRP_IPV6_IFADDR, +#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR + RTNLGRP_IPV6_MROUTE, +#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE + RTNLGRP_IPV6_ROUTE, +#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE + RTNLGRP_IPV6_IFINFO, +#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO + RTNLGRP_DECnet_IFADDR, +#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR + RTNLGRP_NOP2, + RTNLGRP_DECnet_ROUTE, +#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE + RTNLGRP_DECnet_RULE, +#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE + RTNLGRP_NOP4, + RTNLGRP_IPV6_PREFIX, +#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX + RTNLGRP_IPV6_RULE, +#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE + RTNLGRP_ND_USEROPT, +#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT + RTNLGRP_PHONET_IFADDR, +#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR + RTNLGRP_PHONET_ROUTE, +#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE + RTNLGRP_DCB, +#define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB + RTNLGRP_MPLS_ROUTE, +#define RTNLGRP_MPLS_ROUTE RTNLGRP_MPLS_ROUTE + RTNLGRP_NSID, +#define RTNLGRP_NSID RTNLGRP_NSID + RTNLGRP_MPLS_NETCONF, +#define RTNLGRP_MPLS_NETCONF RTNLGRP_MPLS_NETCONF + RTNLGRP_IPV4_MROUTE_R, +#define RTNLGRP_IPV4_MROUTE_R RTNLGRP_IPV4_MROUTE_R + RTNLGRP_IPV6_MROUTE_R, +#define RTNLGRP_IPV6_MROUTE_R RTNLGRP_IPV6_MROUTE_R + RTNLGRP_NEXTHOP, +#define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP + RTNLGRP_BRVLAN, +#define RTNLGRP_BRVLAN RTNLGRP_BRVLAN + RTNLGRP_MCTP_IFADDR, +#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR + RTNLGRP_TUNNEL, +#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL + RTNLGRP_STATS, +#define RTNLGRP_STATS RTNLGRP_STATS + __RTNLGRP_MAX +}; +#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) + +/* TC action piece */ +struct tcamsg { + unsigned char tca_family; + unsigned char tca__pad1; + unsigned short tca__pad2; +}; + +enum { + TCA_ROOT_UNSPEC, + TCA_ROOT_TAB, +#define TCA_ACT_TAB TCA_ROOT_TAB +#define TCAA_MAX TCA_ROOT_TAB + TCA_ROOT_FLAGS, + TCA_ROOT_COUNT, + TCA_ROOT_TIME_DELTA, /* in msecs */ + TCA_ROOT_EXT_WARN_MSG, + __TCA_ROOT_MAX, +#define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) +}; + +#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) +#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) +/* tcamsg flags stored in attribute TCA_ROOT_FLAGS + * + * TCA_ACT_FLAG_LARGE_DUMP_ON user->kernel to request for larger than + * TCA_ACT_MAX_PRIO actions in a dump. All dump responses will contain the + * number of actions being dumped stored in for user app's consumption in + * TCA_ROOT_COUNT + * + * TCA_ACT_FLAG_TERSE_DUMP user->kernel to request terse (brief) dump that only + * includes essential action info (kind, index, etc.) + * + */ +#define TCA_FLAG_LARGE_DUMP_ON (1 << 0) +#define TCA_ACT_FLAG_LARGE_DUMP_ON TCA_FLAG_LARGE_DUMP_ON +#define TCA_ACT_FLAG_TERSE_DUMP (1 << 1) + +/* New extended info filters for IFLA_EXT_MASK */ +#define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) +#define RTEXT_FILTER_BRVLAN_COMPRESSED (1 << 2) +#define RTEXT_FILTER_SKIP_STATS (1 << 3) +#define RTEXT_FILTER_MRP (1 << 4) +#define RTEXT_FILTER_CFM_CONFIG (1 << 5) +#define RTEXT_FILTER_CFM_STATUS (1 << 6) +#define RTEXT_FILTER_MST (1 << 7) + +/* End of information exported to user level */ + + + +#endif /* __LINUX_RTNETLINK_H */ diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h new file mode 100644 index 0000000..d52e122 --- /dev/null +++ b/include/uapi/linux/sctp.h @@ -0,0 +1,1220 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* SCTP kernel implementation + * (C) Copyright IBM Corp. 2001, 2004 + * Copyright (c) 1999-2000 Cisco, Inc. + * Copyright (c) 1999-2001 Motorola, Inc. + * Copyright (c) 2002 Intel Corp. + * + * This file is part of the SCTP kernel implementation + * + * This header represents the structures and constants needed to support + * the SCTP Extension to the Sockets API. + * + * This SCTP implementation is free software; + * you can redistribute it and/or modify it under the terms of + * the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This SCTP implementation is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * ************************ + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU CC; see the file COPYING. If not, see + * <http://www.gnu.org/licenses/>. + * + * Please send any bug reports or fixes you make to the + * email address(es): + * lksctp developers <linux-sctp@vger.kernel.org> + * + * Or submit a bug report through the following website: + * http://www.sf.net/projects/lksctp + * + * Written or modified by: + * La Monte H.P. Yarroll <piggy@acm.org> + * R. Stewart <randall@sctp.chicago.il.us> + * K. Morneau <kmorneau@cisco.com> + * Q. Xie <qxie1@email.mot.com> + * Karl Knutson <karl@athena.chicago.il.us> + * Jon Grimm <jgrimm@us.ibm.com> + * Daisy Chang <daisyc@us.ibm.com> + * Ryan Layer <rmlayer@us.ibm.com> + * Ardelle Fan <ardelle.fan@intel.com> + * Sridhar Samudrala <sri@us.ibm.com> + * Inaky Perez-Gonzalez <inaky.gonzalez@intel.com> + * Vlad Yasevich <vladislav.yasevich@hp.com> + * + * Any bugs reported given to us we will try to fix... any fixes shared will + * be incorporated into the next SCTP release. + */ + +#ifndef _SCTP_H +#define _SCTP_H + +#include <linux/types.h> +#include <linux/socket.h> + +typedef __s32 sctp_assoc_t; + +#define SCTP_FUTURE_ASSOC 0 +#define SCTP_CURRENT_ASSOC 1 +#define SCTP_ALL_ASSOC 2 + +/* The following symbols come from the Sockets API Extensions for + * SCTP <draft-ietf-tsvwg-sctpsocket-07.txt>. + */ +#define SCTP_RTOINFO 0 +#define SCTP_ASSOCINFO 1 +#define SCTP_INITMSG 2 +#define SCTP_NODELAY 3 /* Get/set nodelay option. */ +#define SCTP_AUTOCLOSE 4 +#define SCTP_SET_PEER_PRIMARY_ADDR 5 +#define SCTP_PRIMARY_ADDR 6 +#define SCTP_ADAPTATION_LAYER 7 +#define SCTP_DISABLE_FRAGMENTS 8 +#define SCTP_PEER_ADDR_PARAMS 9 +#define SCTP_DEFAULT_SEND_PARAM 10 +#define SCTP_EVENTS 11 +#define SCTP_I_WANT_MAPPED_V4_ADDR 12 /* Turn on/off mapped v4 addresses */ +#define SCTP_MAXSEG 13 /* Get/set maximum fragment. */ +#define SCTP_STATUS 14 +#define SCTP_GET_PEER_ADDR_INFO 15 +#define SCTP_DELAYED_ACK_TIME 16 +#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK_TIME +#define SCTP_DELAYED_SACK SCTP_DELAYED_ACK_TIME +#define SCTP_CONTEXT 17 +#define SCTP_FRAGMENT_INTERLEAVE 18 +#define SCTP_PARTIAL_DELIVERY_POINT 19 /* Set/Get partial delivery point */ +#define SCTP_MAX_BURST 20 /* Set/Get max burst */ +#define SCTP_AUTH_CHUNK 21 /* Set only: add a chunk type to authenticate */ +#define SCTP_HMAC_IDENT 22 +#define SCTP_AUTH_KEY 23 +#define SCTP_AUTH_ACTIVE_KEY 24 +#define SCTP_AUTH_DELETE_KEY 25 +#define SCTP_PEER_AUTH_CHUNKS 26 /* Read only */ +#define SCTP_LOCAL_AUTH_CHUNKS 27 /* Read only */ +#define SCTP_GET_ASSOC_NUMBER 28 /* Read only */ +#define SCTP_GET_ASSOC_ID_LIST 29 /* Read only */ +#define SCTP_AUTO_ASCONF 30 +#define SCTP_PEER_ADDR_THLDS 31 +#define SCTP_RECVRCVINFO 32 +#define SCTP_RECVNXTINFO 33 +#define SCTP_DEFAULT_SNDINFO 34 +#define SCTP_AUTH_DEACTIVATE_KEY 35 +#define SCTP_REUSE_PORT 36 +#define SCTP_PEER_ADDR_THLDS_V2 37 + +/* Internal Socket Options. Some of the sctp library functions are + * implemented using these socket options. + */ +#define SCTP_SOCKOPT_BINDX_ADD 100 /* BINDX requests for adding addrs */ +#define SCTP_SOCKOPT_BINDX_REM 101 /* BINDX requests for removing addrs. */ +#define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */ +/* Options 104-106 are deprecated and removed. Do not use this space */ +#define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */ +#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */ +#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */ +#define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */ +#define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */ +#define SCTP_GET_ASSOC_STATS 112 /* Read only */ +#define SCTP_PR_SUPPORTED 113 +#define SCTP_DEFAULT_PRINFO 114 +#define SCTP_PR_ASSOC_STATUS 115 +#define SCTP_PR_STREAM_STATUS 116 +#define SCTP_RECONFIG_SUPPORTED 117 +#define SCTP_ENABLE_STREAM_RESET 118 +#define SCTP_RESET_STREAMS 119 +#define SCTP_RESET_ASSOC 120 +#define SCTP_ADD_STREAMS 121 +#define SCTP_SOCKOPT_PEELOFF_FLAGS 122 +#define SCTP_STREAM_SCHEDULER 123 +#define SCTP_STREAM_SCHEDULER_VALUE 124 +#define SCTP_INTERLEAVING_SUPPORTED 125 +#define SCTP_SENDMSG_CONNECT 126 +#define SCTP_EVENT 127 +#define SCTP_ASCONF_SUPPORTED 128 +#define SCTP_AUTH_SUPPORTED 129 +#define SCTP_ECN_SUPPORTED 130 +#define SCTP_EXPOSE_POTENTIALLY_FAILED_STATE 131 +#define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE +#define SCTP_REMOTE_UDP_ENCAPS_PORT 132 +#define SCTP_PLPMTUD_PROBE_INTERVAL 133 + +/* PR-SCTP policies */ +#define SCTP_PR_SCTP_NONE 0x0000 +#define SCTP_PR_SCTP_TTL 0x0010 +#define SCTP_PR_SCTP_RTX 0x0020 +#define SCTP_PR_SCTP_PRIO 0x0030 +#define SCTP_PR_SCTP_MAX SCTP_PR_SCTP_PRIO +#define SCTP_PR_SCTP_MASK 0x0030 + +#define __SCTP_PR_INDEX(x) ((x >> 4) - 1) +#define SCTP_PR_INDEX(x) __SCTP_PR_INDEX(SCTP_PR_SCTP_ ## x) + +#define SCTP_PR_POLICY(x) ((x) & SCTP_PR_SCTP_MASK) +#define SCTP_PR_SET_POLICY(flags, x) \ + do { \ + flags &= ~SCTP_PR_SCTP_MASK; \ + flags |= x; \ + } while (0) + +#define SCTP_PR_TTL_ENABLED(x) (SCTP_PR_POLICY(x) == SCTP_PR_SCTP_TTL) +#define SCTP_PR_RTX_ENABLED(x) (SCTP_PR_POLICY(x) == SCTP_PR_SCTP_RTX) +#define SCTP_PR_PRIO_ENABLED(x) (SCTP_PR_POLICY(x) == SCTP_PR_SCTP_PRIO) + +/* For enable stream reset */ +#define SCTP_ENABLE_RESET_STREAM_REQ 0x01 +#define SCTP_ENABLE_RESET_ASSOC_REQ 0x02 +#define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x04 +#define SCTP_ENABLE_STRRESET_MASK 0x07 + +#define SCTP_STREAM_RESET_INCOMING 0x01 +#define SCTP_STREAM_RESET_OUTGOING 0x02 + +/* These are bit fields for msghdr->msg_flags. See section 5.1. */ +/* On user space Linux, these live in <bits/socket.h> as an enum. */ +enum sctp_msg_flags { + MSG_NOTIFICATION = 0x8000, +#define MSG_NOTIFICATION MSG_NOTIFICATION +}; + +/* 5.3.1 SCTP Initiation Structure (SCTP_INIT) + * + * This cmsghdr structure provides information for initializing new + * SCTP associations with sendmsg(). The SCTP_INITMSG socket option + * uses this same data structure. This structure is not used for + * recvmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ---------------------- + * IPPROTO_SCTP SCTP_INIT struct sctp_initmsg + */ +struct sctp_initmsg { + __u16 sinit_num_ostreams; + __u16 sinit_max_instreams; + __u16 sinit_max_attempts; + __u16 sinit_max_init_timeo; +}; + +/* 5.3.2 SCTP Header Information Structure (SCTP_SNDRCV) + * + * This cmsghdr structure specifies SCTP options for sendmsg() and + * describes SCTP header information about a received message through + * recvmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ---------------------- + * IPPROTO_SCTP SCTP_SNDRCV struct sctp_sndrcvinfo + */ +struct sctp_sndrcvinfo { + __u16 sinfo_stream; + __u16 sinfo_ssn; + __u16 sinfo_flags; + __u32 sinfo_ppid; + __u32 sinfo_context; + __u32 sinfo_timetolive; + __u32 sinfo_tsn; + __u32 sinfo_cumtsn; + sctp_assoc_t sinfo_assoc_id; +}; + +/* 5.3.4 SCTP Send Information Structure (SCTP_SNDINFO) + * + * This cmsghdr structure specifies SCTP options for sendmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_SNDINFO struct sctp_sndinfo + */ +struct sctp_sndinfo { + __u16 snd_sid; + __u16 snd_flags; + __u32 snd_ppid; + __u32 snd_context; + sctp_assoc_t snd_assoc_id; +}; + +/* 5.3.5 SCTP Receive Information Structure (SCTP_RCVINFO) + * + * This cmsghdr structure describes SCTP receive information + * about a received message through recvmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_RCVINFO struct sctp_rcvinfo + */ +struct sctp_rcvinfo { + __u16 rcv_sid; + __u16 rcv_ssn; + __u16 rcv_flags; + __u32 rcv_ppid; + __u32 rcv_tsn; + __u32 rcv_cumtsn; + __u32 rcv_context; + sctp_assoc_t rcv_assoc_id; +}; + +/* 5.3.6 SCTP Next Receive Information Structure (SCTP_NXTINFO) + * + * This cmsghdr structure describes SCTP receive information + * of the next message that will be delivered through recvmsg() + * if this information is already available when delivering + * the current message. + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_NXTINFO struct sctp_nxtinfo + */ +struct sctp_nxtinfo { + __u16 nxt_sid; + __u16 nxt_flags; + __u32 nxt_ppid; + __u32 nxt_length; + sctp_assoc_t nxt_assoc_id; +}; + +/* 5.3.7 SCTP PR-SCTP Information Structure (SCTP_PRINFO) + * + * This cmsghdr structure specifies SCTP options for sendmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_PRINFO struct sctp_prinfo + */ +struct sctp_prinfo { + __u16 pr_policy; + __u32 pr_value; +}; + +/* 5.3.8 SCTP AUTH Information Structure (SCTP_AUTHINFO) + * + * This cmsghdr structure specifies SCTP options for sendmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_AUTHINFO struct sctp_authinfo + */ +struct sctp_authinfo { + __u16 auth_keynumber; +}; + +/* + * sinfo_flags: 16 bits (unsigned integer) + * + * This field may contain any of the following flags and is composed of + * a bitwise OR of these values. + */ +enum sctp_sinfo_flags { + SCTP_UNORDERED = (1 << 0), /* Send/receive message unordered. */ + SCTP_ADDR_OVER = (1 << 1), /* Override the primary destination. */ + SCTP_ABORT = (1 << 2), /* Send an ABORT message to the peer. */ + SCTP_SACK_IMMEDIATELY = (1 << 3), /* SACK should be sent without delay. */ + /* 2 bits here have been used by SCTP_PR_SCTP_MASK */ + SCTP_SENDALL = (1 << 6), + SCTP_PR_SCTP_ALL = (1 << 7), + SCTP_NOTIFICATION = MSG_NOTIFICATION, /* Next message is not user msg but notification. */ + SCTP_EOF = MSG_FIN, /* Initiate graceful shutdown process. */ +}; + +typedef union { + __u8 raw; + struct sctp_initmsg init; + struct sctp_sndrcvinfo sndrcv; +} sctp_cmsg_data_t; + +/* These are cmsg_types. */ +typedef enum sctp_cmsg_type { + SCTP_INIT, /* 5.2.1 SCTP Initiation Structure */ +#define SCTP_INIT SCTP_INIT + SCTP_SNDRCV, /* 5.2.2 SCTP Header Information Structure */ +#define SCTP_SNDRCV SCTP_SNDRCV + SCTP_SNDINFO, /* 5.3.4 SCTP Send Information Structure */ +#define SCTP_SNDINFO SCTP_SNDINFO + SCTP_RCVINFO, /* 5.3.5 SCTP Receive Information Structure */ +#define SCTP_RCVINFO SCTP_RCVINFO + SCTP_NXTINFO, /* 5.3.6 SCTP Next Receive Information Structure */ +#define SCTP_NXTINFO SCTP_NXTINFO + SCTP_PRINFO, /* 5.3.7 SCTP PR-SCTP Information Structure */ +#define SCTP_PRINFO SCTP_PRINFO + SCTP_AUTHINFO, /* 5.3.8 SCTP AUTH Information Structure */ +#define SCTP_AUTHINFO SCTP_AUTHINFO + SCTP_DSTADDRV4, /* 5.3.9 SCTP Destination IPv4 Address Structure */ +#define SCTP_DSTADDRV4 SCTP_DSTADDRV4 + SCTP_DSTADDRV6, /* 5.3.10 SCTP Destination IPv6 Address Structure */ +#define SCTP_DSTADDRV6 SCTP_DSTADDRV6 +} sctp_cmsg_t; + +/* + * 5.3.1.1 SCTP_ASSOC_CHANGE + * + * Communication notifications inform the ULP that an SCTP association + * has either begun or ended. The identifier for a new association is + * provided by this notificaion. The notification information has the + * following format: + * + */ +struct sctp_assoc_change { + __u16 sac_type; + __u16 sac_flags; + __u32 sac_length; + __u16 sac_state; + __u16 sac_error; + __u16 sac_outbound_streams; + __u16 sac_inbound_streams; + sctp_assoc_t sac_assoc_id; + __u8 sac_info[]; +}; + +/* + * sac_state: 32 bits (signed integer) + * + * This field holds one of a number of values that communicate the + * event that happened to the association. They include: + * + * Note: The following state names deviate from the API draft as + * the names clash too easily with other kernel symbols. + */ +enum sctp_sac_state { + SCTP_COMM_UP, + SCTP_COMM_LOST, + SCTP_RESTART, + SCTP_SHUTDOWN_COMP, + SCTP_CANT_STR_ASSOC, +}; + +/* + * 5.3.1.2 SCTP_PEER_ADDR_CHANGE + * + * When a destination address on a multi-homed peer encounters a change + * an interface details event is sent. The information has the + * following structure: + */ +struct sctp_paddr_change { + __u16 spc_type; + __u16 spc_flags; + __u32 spc_length; + struct sockaddr_storage spc_aaddr; + int spc_state; + int spc_error; + sctp_assoc_t spc_assoc_id; +} __attribute__((packed, aligned(4))); + +/* + * spc_state: 32 bits (signed integer) + * + * This field holds one of a number of values that communicate the + * event that happened to the address. They include: + */ +enum sctp_spc_state { + SCTP_ADDR_AVAILABLE, + SCTP_ADDR_UNREACHABLE, + SCTP_ADDR_REMOVED, + SCTP_ADDR_ADDED, + SCTP_ADDR_MADE_PRIM, + SCTP_ADDR_CONFIRMED, + SCTP_ADDR_POTENTIALLY_FAILED, +#define SCTP_ADDR_PF SCTP_ADDR_POTENTIALLY_FAILED +}; + + +/* + * 5.3.1.3 SCTP_REMOTE_ERROR + * + * A remote peer may send an Operational Error message to its peer. + * This message indicates a variety of error conditions on an + * association. The entire error TLV as it appears on the wire is + * included in a SCTP_REMOTE_ERROR event. Please refer to the SCTP + * specification [SCTP] and any extensions for a list of possible + * error formats. SCTP error TLVs have the format: + */ +struct sctp_remote_error { + __u16 sre_type; + __u16 sre_flags; + __u32 sre_length; + __be16 sre_error; + sctp_assoc_t sre_assoc_id; + __u8 sre_data[]; +}; + + +/* + * 5.3.1.4 SCTP_SEND_FAILED + * + * If SCTP cannot deliver a message it may return the message as a + * notification. + */ +struct sctp_send_failed { + __u16 ssf_type; + __u16 ssf_flags; + __u32 ssf_length; + __u32 ssf_error; + struct sctp_sndrcvinfo ssf_info; + sctp_assoc_t ssf_assoc_id; + __u8 ssf_data[]; +}; + +struct sctp_send_failed_event { + __u16 ssf_type; + __u16 ssf_flags; + __u32 ssf_length; + __u32 ssf_error; + struct sctp_sndinfo ssfe_info; + sctp_assoc_t ssf_assoc_id; + __u8 ssf_data[]; +}; + +/* + * ssf_flags: 16 bits (unsigned integer) + * + * The flag value will take one of the following values + * + * SCTP_DATA_UNSENT - Indicates that the data was never put on + * the wire. + * + * SCTP_DATA_SENT - Indicates that the data was put on the wire. + * Note that this does not necessarily mean that the + * data was (or was not) successfully delivered. + */ +enum sctp_ssf_flags { + SCTP_DATA_UNSENT, + SCTP_DATA_SENT, +}; + +/* + * 5.3.1.5 SCTP_SHUTDOWN_EVENT + * + * When a peer sends a SHUTDOWN, SCTP delivers this notification to + * inform the application that it should cease sending data. + */ +struct sctp_shutdown_event { + __u16 sse_type; + __u16 sse_flags; + __u32 sse_length; + sctp_assoc_t sse_assoc_id; +}; + +/* + * 5.3.1.6 SCTP_ADAPTATION_INDICATION + * + * When a peer sends a Adaptation Layer Indication parameter , SCTP + * delivers this notification to inform the application + * that of the peers requested adaptation layer. + */ +struct sctp_adaptation_event { + __u16 sai_type; + __u16 sai_flags; + __u32 sai_length; + __u32 sai_adaptation_ind; + sctp_assoc_t sai_assoc_id; +}; + +/* + * 5.3.1.7 SCTP_PARTIAL_DELIVERY_EVENT + * + * When a receiver is engaged in a partial delivery of a + * message this notification will be used to indicate + * various events. + */ +struct sctp_pdapi_event { + __u16 pdapi_type; + __u16 pdapi_flags; + __u32 pdapi_length; + __u32 pdapi_indication; + sctp_assoc_t pdapi_assoc_id; + __u32 pdapi_stream; + __u32 pdapi_seq; +}; + +enum { SCTP_PARTIAL_DELIVERY_ABORTED=0, }; + +/* + * 5.3.1.8. SCTP_AUTHENTICATION_EVENT + * + * When a receiver is using authentication this message will provide + * notifications regarding new keys being made active as well as errors. + */ +struct sctp_authkey_event { + __u16 auth_type; + __u16 auth_flags; + __u32 auth_length; + __u16 auth_keynumber; + __u16 auth_altkeynumber; + __u32 auth_indication; + sctp_assoc_t auth_assoc_id; +}; + +enum { + SCTP_AUTH_NEW_KEY, +#define SCTP_AUTH_NEWKEY SCTP_AUTH_NEW_KEY /* compatible with before */ + SCTP_AUTH_FREE_KEY, + SCTP_AUTH_NO_AUTH, +}; + +/* + * 6.1.9. SCTP_SENDER_DRY_EVENT + * + * When the SCTP stack has no more user data to send or retransmit, this + * notification is given to the user. Also, at the time when a user app + * subscribes to this event, if there is no data to be sent or + * retransmit, the stack will immediately send up this notification. + */ +struct sctp_sender_dry_event { + __u16 sender_dry_type; + __u16 sender_dry_flags; + __u32 sender_dry_length; + sctp_assoc_t sender_dry_assoc_id; +}; + +#define SCTP_STREAM_RESET_INCOMING_SSN 0x0001 +#define SCTP_STREAM_RESET_OUTGOING_SSN 0x0002 +#define SCTP_STREAM_RESET_DENIED 0x0004 +#define SCTP_STREAM_RESET_FAILED 0x0008 +struct sctp_stream_reset_event { + __u16 strreset_type; + __u16 strreset_flags; + __u32 strreset_length; + sctp_assoc_t strreset_assoc_id; + __u16 strreset_stream_list[]; +}; + +#define SCTP_ASSOC_RESET_DENIED 0x0004 +#define SCTP_ASSOC_RESET_FAILED 0x0008 +struct sctp_assoc_reset_event { + __u16 assocreset_type; + __u16 assocreset_flags; + __u32 assocreset_length; + sctp_assoc_t assocreset_assoc_id; + __u32 assocreset_local_tsn; + __u32 assocreset_remote_tsn; +}; + +#define SCTP_ASSOC_CHANGE_DENIED 0x0004 +#define SCTP_ASSOC_CHANGE_FAILED 0x0008 +#define SCTP_STREAM_CHANGE_DENIED SCTP_ASSOC_CHANGE_DENIED +#define SCTP_STREAM_CHANGE_FAILED SCTP_ASSOC_CHANGE_FAILED +struct sctp_stream_change_event { + __u16 strchange_type; + __u16 strchange_flags; + __u32 strchange_length; + sctp_assoc_t strchange_assoc_id; + __u16 strchange_instrms; + __u16 strchange_outstrms; +}; + +/* + * Described in Section 7.3 + * Ancillary Data and Notification Interest Options + */ +struct sctp_event_subscribe { + __u8 sctp_data_io_event; + __u8 sctp_association_event; + __u8 sctp_address_event; + __u8 sctp_send_failure_event; + __u8 sctp_peer_error_event; + __u8 sctp_shutdown_event; + __u8 sctp_partial_delivery_event; + __u8 sctp_adaptation_layer_event; + __u8 sctp_authentication_event; + __u8 sctp_sender_dry_event; + __u8 sctp_stream_reset_event; + __u8 sctp_assoc_reset_event; + __u8 sctp_stream_change_event; + __u8 sctp_send_failure_event_event; +}; + +/* + * 5.3.1 SCTP Notification Structure + * + * The notification structure is defined as the union of all + * notification types. + * + */ +union sctp_notification { + struct { + __u16 sn_type; /* Notification type. */ + __u16 sn_flags; + __u32 sn_length; + } sn_header; + struct sctp_assoc_change sn_assoc_change; + struct sctp_paddr_change sn_paddr_change; + struct sctp_remote_error sn_remote_error; + struct sctp_send_failed sn_send_failed; + struct sctp_shutdown_event sn_shutdown_event; + struct sctp_adaptation_event sn_adaptation_event; + struct sctp_pdapi_event sn_pdapi_event; + struct sctp_authkey_event sn_authkey_event; + struct sctp_sender_dry_event sn_sender_dry_event; + struct sctp_stream_reset_event sn_strreset_event; + struct sctp_assoc_reset_event sn_assocreset_event; + struct sctp_stream_change_event sn_strchange_event; + struct sctp_send_failed_event sn_send_failed_event; +}; + +/* Section 5.3.1 + * All standard values for sn_type flags are greater than 2^15. + * Values from 2^15 and down are reserved. + */ + +enum sctp_sn_type { + SCTP_SN_TYPE_BASE = (1<<15), + SCTP_DATA_IO_EVENT = SCTP_SN_TYPE_BASE, +#define SCTP_DATA_IO_EVENT SCTP_DATA_IO_EVENT + SCTP_ASSOC_CHANGE, +#define SCTP_ASSOC_CHANGE SCTP_ASSOC_CHANGE + SCTP_PEER_ADDR_CHANGE, +#define SCTP_PEER_ADDR_CHANGE SCTP_PEER_ADDR_CHANGE + SCTP_SEND_FAILED, +#define SCTP_SEND_FAILED SCTP_SEND_FAILED + SCTP_REMOTE_ERROR, +#define SCTP_REMOTE_ERROR SCTP_REMOTE_ERROR + SCTP_SHUTDOWN_EVENT, +#define SCTP_SHUTDOWN_EVENT SCTP_SHUTDOWN_EVENT + SCTP_PARTIAL_DELIVERY_EVENT, +#define SCTP_PARTIAL_DELIVERY_EVENT SCTP_PARTIAL_DELIVERY_EVENT + SCTP_ADAPTATION_INDICATION, +#define SCTP_ADAPTATION_INDICATION SCTP_ADAPTATION_INDICATION + SCTP_AUTHENTICATION_EVENT, +#define SCTP_AUTHENTICATION_INDICATION SCTP_AUTHENTICATION_EVENT + SCTP_SENDER_DRY_EVENT, +#define SCTP_SENDER_DRY_EVENT SCTP_SENDER_DRY_EVENT + SCTP_STREAM_RESET_EVENT, +#define SCTP_STREAM_RESET_EVENT SCTP_STREAM_RESET_EVENT + SCTP_ASSOC_RESET_EVENT, +#define SCTP_ASSOC_RESET_EVENT SCTP_ASSOC_RESET_EVENT + SCTP_STREAM_CHANGE_EVENT, +#define SCTP_STREAM_CHANGE_EVENT SCTP_STREAM_CHANGE_EVENT + SCTP_SEND_FAILED_EVENT, +#define SCTP_SEND_FAILED_EVENT SCTP_SEND_FAILED_EVENT + SCTP_SN_TYPE_MAX = SCTP_SEND_FAILED_EVENT, +#define SCTP_SN_TYPE_MAX SCTP_SN_TYPE_MAX +}; + +/* Notification error codes used to fill up the error fields in some + * notifications. + * SCTP_PEER_ADDRESS_CHAGE : spc_error + * SCTP_ASSOC_CHANGE : sac_error + * These names should be potentially included in the draft 04 of the SCTP + * sockets API specification. + */ +typedef enum sctp_sn_error { + SCTP_FAILED_THRESHOLD, + SCTP_RECEIVED_SACK, + SCTP_HEARTBEAT_SUCCESS, + SCTP_RESPONSE_TO_USER_REQ, + SCTP_INTERNAL_ERROR, + SCTP_SHUTDOWN_GUARD_EXPIRES, + SCTP_PEER_FAULTY, +} sctp_sn_error_t; + +/* + * 7.1.1 Retransmission Timeout Parameters (SCTP_RTOINFO) + * + * The protocol parameters used to initialize and bound retransmission + * timeout (RTO) are tunable. See [SCTP] for more information on how + * these parameters are used in RTO calculation. + */ +struct sctp_rtoinfo { + sctp_assoc_t srto_assoc_id; + __u32 srto_initial; + __u32 srto_max; + __u32 srto_min; +}; + +/* + * 7.1.2 Association Parameters (SCTP_ASSOCINFO) + * + * This option is used to both examine and set various association and + * endpoint parameters. + */ +struct sctp_assocparams { + sctp_assoc_t sasoc_assoc_id; + __u16 sasoc_asocmaxrxt; + __u16 sasoc_number_peer_destinations; + __u32 sasoc_peer_rwnd; + __u32 sasoc_local_rwnd; + __u32 sasoc_cookie_life; +}; + +/* + * 7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR) + * + * Requests that the peer mark the enclosed address as the association + * primary. The enclosed address must be one of the association's + * locally bound addresses. The following structure is used to make a + * set primary request: + */ +struct sctp_setpeerprim { + sctp_assoc_t sspp_assoc_id; + struct sockaddr_storage sspp_addr; +} __attribute__((packed, aligned(4))); + +/* + * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR) + * + * Requests that the local SCTP stack use the enclosed peer address as + * the association primary. The enclosed address must be one of the + * association peer's addresses. The following structure is used to + * make a set peer primary request: + */ +struct sctp_prim { + sctp_assoc_t ssp_assoc_id; + struct sockaddr_storage ssp_addr; +} __attribute__((packed, aligned(4))); + +/* For backward compatibility use, define the old name too */ +#define sctp_setprim sctp_prim + +/* + * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER) + * + * Requests that the local endpoint set the specified Adaptation Layer + * Indication parameter for all future INIT and INIT-ACK exchanges. + */ +struct sctp_setadaptation { + __u32 ssb_adaptation_ind; +}; + +/* + * 7.1.13 Peer Address Parameters (SCTP_PEER_ADDR_PARAMS) + * + * Applications can enable or disable heartbeats for any peer address + * of an association, modify an address's heartbeat interval, force a + * heartbeat to be sent immediately, and adjust the address's maximum + * number of retransmissions sent before an address is considered + * unreachable. The following structure is used to access and modify an + * address's parameters: + */ +enum sctp_spp_flags { + SPP_HB_ENABLE = 1<<0, /*Enable heartbeats*/ + SPP_HB_DISABLE = 1<<1, /*Disable heartbeats*/ + SPP_HB = SPP_HB_ENABLE | SPP_HB_DISABLE, + SPP_HB_DEMAND = 1<<2, /*Send heartbeat immediately*/ + SPP_PMTUD_ENABLE = 1<<3, /*Enable PMTU discovery*/ + SPP_PMTUD_DISABLE = 1<<4, /*Disable PMTU discovery*/ + SPP_PMTUD = SPP_PMTUD_ENABLE | SPP_PMTUD_DISABLE, + SPP_SACKDELAY_ENABLE = 1<<5, /*Enable SACK*/ + SPP_SACKDELAY_DISABLE = 1<<6, /*Disable SACK*/ + SPP_SACKDELAY = SPP_SACKDELAY_ENABLE | SPP_SACKDELAY_DISABLE, + SPP_HB_TIME_IS_ZERO = 1<<7, /* Set HB delay to 0 */ + SPP_IPV6_FLOWLABEL = 1<<8, + SPP_DSCP = 1<<9, +}; + +struct sctp_paddrparams { + sctp_assoc_t spp_assoc_id; + struct sockaddr_storage spp_address; + __u32 spp_hbinterval; + __u16 spp_pathmaxrxt; + __u32 spp_pathmtu; + __u32 spp_sackdelay; + __u32 spp_flags; + __u32 spp_ipv6_flowlabel; + __u8 spp_dscp; +} __attribute__((packed, aligned(4))); + +/* + * 7.1.18. Add a chunk that must be authenticated (SCTP_AUTH_CHUNK) + * + * This set option adds a chunk type that the user is requesting to be + * received only in an authenticated way. Changes to the list of chunks + * will only effect future associations on the socket. + */ +struct sctp_authchunk { + __u8 sauth_chunk; +}; + +/* + * 7.1.19. Get or set the list of supported HMAC Identifiers (SCTP_HMAC_IDENT) + * + * This option gets or sets the list of HMAC algorithms that the local + * endpoint requires the peer to use. + */ +/* This here is only used by user space as is. It might not be a good idea + * to export/reveal the whole structure with reserved fields etc. + */ +enum { + SCTP_AUTH_HMAC_ID_SHA1 = 1, + SCTP_AUTH_HMAC_ID_SHA256 = 3, +}; + +struct sctp_hmacalgo { + __u32 shmac_num_idents; + __u16 shmac_idents[]; +}; + +/* Sadly, user and kernel space have different names for + * this structure member, so this is to not break anything. + */ +#define shmac_number_of_idents shmac_num_idents + +/* + * 7.1.20. Set a shared key (SCTP_AUTH_KEY) + * + * This option will set a shared secret key which is used to build an + * association shared key. + */ +struct sctp_authkey { + sctp_assoc_t sca_assoc_id; + __u16 sca_keynumber; + __u16 sca_keylength; + __u8 sca_key[]; +}; + +/* + * 7.1.21. Get or set the active shared key (SCTP_AUTH_ACTIVE_KEY) + * + * This option will get or set the active shared key to be used to build + * the association shared key. + */ + +struct sctp_authkeyid { + sctp_assoc_t scact_assoc_id; + __u16 scact_keynumber; +}; + + +/* + * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) + * + * This option will effect the way delayed acks are performed. This + * option allows you to get or set the delayed ack time, in + * milliseconds. It also allows changing the delayed ack frequency. + * Changing the frequency to 1 disables the delayed sack algorithm. If + * the assoc_id is 0, then this sets or gets the endpoints default + * values. If the assoc_id field is non-zero, then the set or get + * effects the specified association for the one to many model (the + * assoc_id field is ignored by the one to one model). Note that if + * sack_delay or sack_freq are 0 when setting this option, then the + * current values will remain unchanged. + */ +struct sctp_sack_info { + sctp_assoc_t sack_assoc_id; + uint32_t sack_delay; + uint32_t sack_freq; +}; + +struct sctp_assoc_value { + sctp_assoc_t assoc_id; + uint32_t assoc_value; +}; + +struct sctp_stream_value { + sctp_assoc_t assoc_id; + uint16_t stream_id; + uint16_t stream_value; +}; + +/* + * 7.2.2 Peer Address Information + * + * Applications can retrieve information about a specific peer address + * of an association, including its reachability state, congestion + * window, and retransmission timer values. This information is + * read-only. The following structure is used to access this + * information: + */ +struct sctp_paddrinfo { + sctp_assoc_t spinfo_assoc_id; + struct sockaddr_storage spinfo_address; + __s32 spinfo_state; + __u32 spinfo_cwnd; + __u32 spinfo_srtt; + __u32 spinfo_rto; + __u32 spinfo_mtu; +} __attribute__((packed, aligned(4))); + +/* Peer addresses's state. */ +/* UNKNOWN: Peer address passed by the upper layer in sendmsg or connect[x] + * calls. + * UNCONFIRMED: Peer address received in INIT/INIT-ACK address parameters. + * Not yet confirmed by a heartbeat and not available for data + * transfers. + * ACTIVE : Peer address confirmed, active and available for data transfers. + * INACTIVE: Peer address inactive and not available for data transfers. + */ +enum sctp_spinfo_state { + SCTP_INACTIVE, + SCTP_PF, +#define SCTP_POTENTIALLY_FAILED SCTP_PF + SCTP_ACTIVE, + SCTP_UNCONFIRMED, + SCTP_UNKNOWN = 0xffff /* Value used for transport state unknown */ +}; + +/* + * 7.2.1 Association Status (SCTP_STATUS) + * + * Applications can retrieve current status information about an + * association, including association state, peer receiver window size, + * number of unacked data chunks, and number of data chunks pending + * receipt. This information is read-only. The following structure is + * used to access this information: + */ +struct sctp_status { + sctp_assoc_t sstat_assoc_id; + __s32 sstat_state; + __u32 sstat_rwnd; + __u16 sstat_unackdata; + __u16 sstat_penddata; + __u16 sstat_instrms; + __u16 sstat_outstrms; + __u32 sstat_fragmentation_point; + struct sctp_paddrinfo sstat_primary; +}; + +/* + * 7.2.3. Get the list of chunks the peer requires to be authenticated + * (SCTP_PEER_AUTH_CHUNKS) + * + * This option gets a list of chunks for a specified association that + * the peer requires to be received authenticated only. + */ +struct sctp_authchunks { + sctp_assoc_t gauth_assoc_id; + __u32 gauth_number_of_chunks; + uint8_t gauth_chunks[]; +}; + +/* The broken spelling has been released already in lksctp-tools header, + * so don't break anyone, now that it's fixed. + */ +#define guth_number_of_chunks gauth_number_of_chunks + +/* Association states. */ +enum sctp_sstat_state { + SCTP_EMPTY = 0, + SCTP_CLOSED = 1, + SCTP_COOKIE_WAIT = 2, + SCTP_COOKIE_ECHOED = 3, + SCTP_ESTABLISHED = 4, + SCTP_SHUTDOWN_PENDING = 5, + SCTP_SHUTDOWN_SENT = 6, + SCTP_SHUTDOWN_RECEIVED = 7, + SCTP_SHUTDOWN_ACK_SENT = 8, +}; + +/* + * 8.2.6. Get the Current Identifiers of Associations + * (SCTP_GET_ASSOC_ID_LIST) + * + * This option gets the current list of SCTP association identifiers of + * the SCTP associations handled by a one-to-many style socket. + */ +struct sctp_assoc_ids { + __u32 gaids_number_of_ids; + sctp_assoc_t gaids_assoc_id[]; +}; + +/* + * 8.3, 8.5 get all peer/local addresses in an association. + * This parameter struct is used by SCTP_GET_PEER_ADDRS and + * SCTP_GET_LOCAL_ADDRS socket options used internally to implement + * sctp_getpaddrs() and sctp_getladdrs() API. + */ +struct sctp_getaddrs_old { + sctp_assoc_t assoc_id; + int addr_num; + struct sockaddr *addrs; +}; + +struct sctp_getaddrs { + sctp_assoc_t assoc_id; /*input*/ + __u32 addr_num; /*output*/ + __u8 addrs[]; /*output, variable size*/ +}; + +/* A socket user request obtained via SCTP_GET_ASSOC_STATS that retrieves + * association stats. All stats are counts except sas_maxrto and + * sas_obs_rto_ipaddr. maxrto is the max observed rto + transport since + * the last call. Will return 0 when RTO was not update since last call + */ +struct sctp_assoc_stats { + sctp_assoc_t sas_assoc_id; /* Input */ + /* Transport of observed max RTO */ + struct sockaddr_storage sas_obs_rto_ipaddr; + __u64 sas_maxrto; /* Maximum Observed RTO for period */ + __u64 sas_isacks; /* SACKs received */ + __u64 sas_osacks; /* SACKs sent */ + __u64 sas_opackets; /* Packets sent */ + __u64 sas_ipackets; /* Packets received */ + __u64 sas_rtxchunks; /* Retransmitted Chunks */ + __u64 sas_outofseqtsns;/* TSN received > next expected */ + __u64 sas_idupchunks; /* Dups received (ordered+unordered) */ + __u64 sas_gapcnt; /* Gap Acknowledgements Received */ + __u64 sas_ouodchunks; /* Unordered data chunks sent */ + __u64 sas_iuodchunks; /* Unordered data chunks received */ + __u64 sas_oodchunks; /* Ordered data chunks sent */ + __u64 sas_iodchunks; /* Ordered data chunks received */ + __u64 sas_octrlchunks; /* Control chunks sent */ + __u64 sas_ictrlchunks; /* Control chunks received */ +}; + +/* + * 8.1 sctp_bindx() + * + * The flags parameter is formed from the bitwise OR of zero or more of the + * following currently defined flags: + */ +#define SCTP_BINDX_ADD_ADDR 0x01 +#define SCTP_BINDX_REM_ADDR 0x02 + +/* This is the structure that is passed as an argument(optval) to + * getsockopt(SCTP_SOCKOPT_PEELOFF). + */ +typedef struct { + sctp_assoc_t associd; + int sd; +} sctp_peeloff_arg_t; + +typedef struct { + sctp_peeloff_arg_t p_arg; + unsigned flags; +} sctp_peeloff_flags_arg_t; + +/* + * Peer Address Thresholds socket option + */ +struct sctp_paddrthlds { + sctp_assoc_t spt_assoc_id; + struct sockaddr_storage spt_address; + __u16 spt_pathmaxrxt; + __u16 spt_pathpfthld; +}; + +/* Use a new structure with spt_pathcpthld for back compatibility */ +struct sctp_paddrthlds_v2 { + sctp_assoc_t spt_assoc_id; + struct sockaddr_storage spt_address; + __u16 spt_pathmaxrxt; + __u16 spt_pathpfthld; + __u16 spt_pathcpthld; +}; + +/* + * Socket Option for Getting the Association/Stream-Specific PR-SCTP Status + */ +struct sctp_prstatus { + sctp_assoc_t sprstat_assoc_id; + __u16 sprstat_sid; + __u16 sprstat_policy; + __u64 sprstat_abandoned_unsent; + __u64 sprstat_abandoned_sent; +}; + +struct sctp_default_prinfo { + sctp_assoc_t pr_assoc_id; + __u32 pr_value; + __u16 pr_policy; +}; + +struct sctp_info { + __u32 sctpi_tag; + __u32 sctpi_state; + __u32 sctpi_rwnd; + __u16 sctpi_unackdata; + __u16 sctpi_penddata; + __u16 sctpi_instrms; + __u16 sctpi_outstrms; + __u32 sctpi_fragmentation_point; + __u32 sctpi_inqueue; + __u32 sctpi_outqueue; + __u32 sctpi_overall_error; + __u32 sctpi_max_burst; + __u32 sctpi_maxseg; + __u32 sctpi_peer_rwnd; + __u32 sctpi_peer_tag; + __u8 sctpi_peer_capable; + __u8 sctpi_peer_sack; + __u16 __reserved1; + + /* assoc status info */ + __u64 sctpi_isacks; + __u64 sctpi_osacks; + __u64 sctpi_opackets; + __u64 sctpi_ipackets; + __u64 sctpi_rtxchunks; + __u64 sctpi_outofseqtsns; + __u64 sctpi_idupchunks; + __u64 sctpi_gapcnt; + __u64 sctpi_ouodchunks; + __u64 sctpi_iuodchunks; + __u64 sctpi_oodchunks; + __u64 sctpi_iodchunks; + __u64 sctpi_octrlchunks; + __u64 sctpi_ictrlchunks; + + /* primary transport info */ + struct sockaddr_storage sctpi_p_address; + __s32 sctpi_p_state; + __u32 sctpi_p_cwnd; + __u32 sctpi_p_srtt; + __u32 sctpi_p_rto; + __u32 sctpi_p_hbinterval; + __u32 sctpi_p_pathmaxrxt; + __u32 sctpi_p_sackdelay; + __u32 sctpi_p_sackfreq; + __u32 sctpi_p_ssthresh; + __u32 sctpi_p_partial_bytes_acked; + __u32 sctpi_p_flight_size; + __u16 sctpi_p_error; + __u16 __reserved2; + + /* sctp sock info */ + __u32 sctpi_s_autoclose; + __u32 sctpi_s_adaptation_ind; + __u32 sctpi_s_pd_point; + __u8 sctpi_s_nodelay; + __u8 sctpi_s_disable_fragments; + __u8 sctpi_s_v4mapped; + __u8 sctpi_s_frag_interleave; + __u32 sctpi_s_type; + __u32 __reserved3; +}; + +struct sctp_reset_streams { + sctp_assoc_t srs_assoc_id; + uint16_t srs_flags; + uint16_t srs_number_streams; /* 0 == ALL */ + uint16_t srs_stream_list[]; /* list if srs_num_streams is not 0 */ +}; + +struct sctp_add_streams { + sctp_assoc_t sas_assoc_id; + uint16_t sas_instrms; + uint16_t sas_outstrms; +}; + +struct sctp_event { + sctp_assoc_t se_assoc_id; + uint16_t se_type; + uint8_t se_on; +}; + +struct sctp_udpencaps { + sctp_assoc_t sue_assoc_id; + struct sockaddr_storage sue_address; + uint16_t sue_port; +}; + +/* SCTP Stream schedulers */ +enum sctp_sched_type { + SCTP_SS_FCFS, + SCTP_SS_DEFAULT = SCTP_SS_FCFS, + SCTP_SS_PRIO, + SCTP_SS_RR, + SCTP_SS_FC, + SCTP_SS_WFQ, + SCTP_SS_MAX = SCTP_SS_WFQ +}; + +/* Probe Interval socket option */ +struct sctp_probeinterval { + sctp_assoc_t spi_assoc_id; + struct sockaddr_storage spi_address; + __u32 spi_interval; +}; + +#endif /* _SCTP_H */ diff --git a/include/uapi/linux/seg6.h b/include/uapi/linux/seg6.h new file mode 100644 index 0000000..e888b00 --- /dev/null +++ b/include/uapi/linux/seg6.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_SEG6_H +#define _LINUX_SEG6_H + +#include <linux/types.h> +#include <linux/in6.h> /* For struct in6_addr. */ + +/* + * SRH + */ +struct ipv6_sr_hdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 type; + __u8 segments_left; + __u8 first_segment; /* Represents the last_entry field of SRH */ + __u8 flags; + __u16 tag; + + struct in6_addr segments[]; +}; + +#define SR6_FLAG1_PROTECTED (1 << 6) +#define SR6_FLAG1_OAM (1 << 5) +#define SR6_FLAG1_ALERT (1 << 4) +#define SR6_FLAG1_HMAC (1 << 3) + +#define SR6_TLV_INGRESS 1 +#define SR6_TLV_EGRESS 2 +#define SR6_TLV_OPAQUE 3 +#define SR6_TLV_PADDING 4 +#define SR6_TLV_HMAC 5 + +#define sr_has_hmac(srh) ((srh)->flags & SR6_FLAG1_HMAC) + +struct sr6_tlv { + __u8 type; + __u8 len; + __u8 data[0]; +}; + +#endif diff --git a/include/uapi/linux/seg6_genl.h b/include/uapi/linux/seg6_genl.h new file mode 100644 index 0000000..0c23052 --- /dev/null +++ b/include/uapi/linux/seg6_genl.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_SEG6_GENL_H +#define _LINUX_SEG6_GENL_H + +#define SEG6_GENL_NAME "SEG6" +#define SEG6_GENL_VERSION 0x1 + +enum { + SEG6_ATTR_UNSPEC, + SEG6_ATTR_DST, + SEG6_ATTR_DSTLEN, + SEG6_ATTR_HMACKEYID, + SEG6_ATTR_SECRET, + SEG6_ATTR_SECRETLEN, + SEG6_ATTR_ALGID, + SEG6_ATTR_HMACINFO, + __SEG6_ATTR_MAX, +}; + +#define SEG6_ATTR_MAX (__SEG6_ATTR_MAX - 1) + +enum { + SEG6_CMD_UNSPEC, + SEG6_CMD_SETHMAC, + SEG6_CMD_DUMPHMAC, + SEG6_CMD_SET_TUNSRC, + SEG6_CMD_GET_TUNSRC, + __SEG6_CMD_MAX, +}; + +#define SEG6_CMD_MAX (__SEG6_CMD_MAX - 1) + +#endif diff --git a/include/uapi/linux/seg6_hmac.h b/include/uapi/linux/seg6_hmac.h new file mode 100644 index 0000000..3fb3412 --- /dev/null +++ b/include/uapi/linux/seg6_hmac.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_SEG6_HMAC_H +#define _LINUX_SEG6_HMAC_H + +#include <linux/types.h> +#include <linux/seg6.h> + +#define SEG6_HMAC_SECRET_LEN 64 +#define SEG6_HMAC_FIELD_LEN 32 + +struct sr6_tlv_hmac { + struct sr6_tlv tlvhdr; + __u16 reserved; + __be32 hmackeyid; + __u8 hmac[SEG6_HMAC_FIELD_LEN]; +}; + +enum { + SEG6_HMAC_ALGO_SHA1 = 1, + SEG6_HMAC_ALGO_SHA256 = 2, +}; + +#endif diff --git a/include/uapi/linux/seg6_iptunnel.h b/include/uapi/linux/seg6_iptunnel.h new file mode 100644 index 0000000..e1929d2 --- /dev/null +++ b/include/uapi/linux/seg6_iptunnel.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_SEG6_IPTUNNEL_H +#define _LINUX_SEG6_IPTUNNEL_H + +#include <linux/seg6.h> /* For struct ipv6_sr_hdr. */ + +enum { + SEG6_IPTUNNEL_UNSPEC, + SEG6_IPTUNNEL_SRH, + __SEG6_IPTUNNEL_MAX, +}; +#define SEG6_IPTUNNEL_MAX (__SEG6_IPTUNNEL_MAX - 1) + +struct seg6_iptunnel_encap { + int mode; + struct ipv6_sr_hdr srh[]; +}; + +#define SEG6_IPTUN_ENCAP_SIZE(x) ((sizeof(*x)) + (((x)->srh->hdrlen + 1) << 3)) + +enum { + SEG6_IPTUN_MODE_INLINE, + SEG6_IPTUN_MODE_ENCAP, + SEG6_IPTUN_MODE_L2ENCAP, + SEG6_IPTUN_MODE_ENCAP_RED, + SEG6_IPTUN_MODE_L2ENCAP_RED, +}; + +#endif diff --git a/include/uapi/linux/seg6_local.h b/include/uapi/linux/seg6_local.h new file mode 100644 index 0000000..6e71d97 --- /dev/null +++ b/include/uapi/linux/seg6_local.h @@ -0,0 +1,137 @@ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_SEG6_LOCAL_H +#define _LINUX_SEG6_LOCAL_H + +#include <linux/seg6.h> + +enum { + SEG6_LOCAL_UNSPEC, + SEG6_LOCAL_ACTION, + SEG6_LOCAL_SRH, + SEG6_LOCAL_TABLE, + SEG6_LOCAL_NH4, + SEG6_LOCAL_NH6, + SEG6_LOCAL_IIF, + SEG6_LOCAL_OIF, + SEG6_LOCAL_BPF, + SEG6_LOCAL_VRFTABLE, + SEG6_LOCAL_COUNTERS, + SEG6_LOCAL_FLAVORS, + __SEG6_LOCAL_MAX, +}; +#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) + +enum { + SEG6_LOCAL_ACTION_UNSPEC = 0, + /* node segment */ + SEG6_LOCAL_ACTION_END = 1, + /* adjacency segment (IPv6 cross-connect) */ + SEG6_LOCAL_ACTION_END_X = 2, + /* lookup of next seg NH in table */ + SEG6_LOCAL_ACTION_END_T = 3, + /* decap and L2 cross-connect */ + SEG6_LOCAL_ACTION_END_DX2 = 4, + /* decap and IPv6 cross-connect */ + SEG6_LOCAL_ACTION_END_DX6 = 5, + /* decap and IPv4 cross-connect */ + SEG6_LOCAL_ACTION_END_DX4 = 6, + /* decap and lookup of DA in v6 table */ + SEG6_LOCAL_ACTION_END_DT6 = 7, + /* decap and lookup of DA in v4 table */ + SEG6_LOCAL_ACTION_END_DT4 = 8, + /* binding segment with insertion */ + SEG6_LOCAL_ACTION_END_B6 = 9, + /* binding segment with encapsulation */ + SEG6_LOCAL_ACTION_END_B6_ENCAP = 10, + /* binding segment with MPLS encap */ + SEG6_LOCAL_ACTION_END_BM = 11, + /* lookup last seg in table */ + SEG6_LOCAL_ACTION_END_S = 12, + /* forward to SR-unaware VNF with static proxy */ + SEG6_LOCAL_ACTION_END_AS = 13, + /* forward to SR-unaware VNF with masquerading */ + SEG6_LOCAL_ACTION_END_AM = 14, + /* custom BPF action */ + SEG6_LOCAL_ACTION_END_BPF = 15, + /* decap and lookup of DA in v4 or v6 table */ + SEG6_LOCAL_ACTION_END_DT46 = 16, + + __SEG6_LOCAL_ACTION_MAX, +}; + +#define SEG6_LOCAL_ACTION_MAX (__SEG6_LOCAL_ACTION_MAX - 1) + +enum { + SEG6_LOCAL_BPF_PROG_UNSPEC, + SEG6_LOCAL_BPF_PROG, + SEG6_LOCAL_BPF_PROG_NAME, + __SEG6_LOCAL_BPF_PROG_MAX, +}; + +#define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1) + +/* SRv6 Behavior counters are encoded as netlink attributes guaranteeing the + * correct alignment. + * Each counter is identified by a different attribute type (i.e. + * SEG6_LOCAL_CNT_PACKETS). + * + * - SEG6_LOCAL_CNT_PACKETS: identifies a counter that counts the number of + * packets that have been CORRECTLY processed by an SRv6 Behavior instance + * (i.e., packets that generate errors or are dropped are NOT counted). + * + * - SEG6_LOCAL_CNT_BYTES: identifies a counter that counts the total amount + * of traffic in bytes of all packets that have been CORRECTLY processed by + * an SRv6 Behavior instance (i.e., packets that generate errors or are + * dropped are NOT counted). + * + * - SEG6_LOCAL_CNT_ERRORS: identifies a counter that counts the number of + * packets that have NOT been properly processed by an SRv6 Behavior instance + * (i.e., packets that generate errors or are dropped). + */ +enum { + SEG6_LOCAL_CNT_UNSPEC, + SEG6_LOCAL_CNT_PAD, /* pad for 64 bits values */ + SEG6_LOCAL_CNT_PACKETS, + SEG6_LOCAL_CNT_BYTES, + SEG6_LOCAL_CNT_ERRORS, + __SEG6_LOCAL_CNT_MAX, +}; + +#define SEG6_LOCAL_CNT_MAX (__SEG6_LOCAL_CNT_MAX - 1) + +/* SRv6 End* Flavor attributes */ +enum { + SEG6_LOCAL_FLV_UNSPEC, + SEG6_LOCAL_FLV_OPERATION, + SEG6_LOCAL_FLV_LCBLOCK_BITS, + SEG6_LOCAL_FLV_LCNODE_FN_BITS, + __SEG6_LOCAL_FLV_MAX, +}; + +#define SEG6_LOCAL_FLV_MAX (__SEG6_LOCAL_FLV_MAX - 1) + +/* Designed flavor operations for SRv6 End* Behavior */ +enum { + SEG6_LOCAL_FLV_OP_UNSPEC, + SEG6_LOCAL_FLV_OP_PSP, + SEG6_LOCAL_FLV_OP_USP, + SEG6_LOCAL_FLV_OP_USD, + SEG6_LOCAL_FLV_OP_NEXT_CSID, + __SEG6_LOCAL_FLV_OP_MAX +}; + +#define SEG6_LOCAL_FLV_OP_MAX (__SEG6_LOCAL_FLV_OP_MAX - 1) + +#endif diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h new file mode 100644 index 0000000..a0819c6 --- /dev/null +++ b/include/uapi/linux/snmp.h @@ -0,0 +1,362 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Definitions for MIBs + * + * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> + */ + +#ifndef _LINUX_SNMP_H +#define _LINUX_SNMP_H + +/* ipstats mib definitions */ +/* + * RFC 1213: MIB-II + * RFC 2011 (updates 1213): SNMPv2-MIB-IP + * RFC 2863: Interfaces Group MIB + * RFC 2465: IPv6 MIB: General Group + * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables + */ +enum +{ + IPSTATS_MIB_NUM = 0, +/* frequently written fields in fast path, kept in same cache line */ + IPSTATS_MIB_INPKTS, /* InReceives */ + IPSTATS_MIB_INOCTETS, /* InOctets */ + IPSTATS_MIB_INDELIVERS, /* InDelivers */ + IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */ + IPSTATS_MIB_OUTREQUESTS, /* OutRequests */ + IPSTATS_MIB_OUTOCTETS, /* OutOctets */ +/* other fields */ + IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */ + IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */ + IPSTATS_MIB_INNOROUTES, /* InNoRoutes */ + IPSTATS_MIB_INADDRERRORS, /* InAddrErrors */ + IPSTATS_MIB_INUNKNOWNPROTOS, /* InUnknownProtos */ + IPSTATS_MIB_INTRUNCATEDPKTS, /* InTruncatedPkts */ + IPSTATS_MIB_INDISCARDS, /* InDiscards */ + IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */ + IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */ + IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */ + IPSTATS_MIB_REASMREQDS, /* ReasmReqds */ + IPSTATS_MIB_REASMOKS, /* ReasmOKs */ + IPSTATS_MIB_REASMFAILS, /* ReasmFails */ + IPSTATS_MIB_FRAGOKS, /* FragOKs */ + IPSTATS_MIB_FRAGFAILS, /* FragFails */ + IPSTATS_MIB_FRAGCREATES, /* FragCreates */ + IPSTATS_MIB_INMCASTPKTS, /* InMcastPkts */ + IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */ + IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */ + IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */ + IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */ + IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */ + IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ + IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ + IPSTATS_MIB_CSUMERRORS, /* InCsumErrors */ + IPSTATS_MIB_NOECTPKTS, /* InNoECTPkts */ + IPSTATS_MIB_ECT1PKTS, /* InECT1Pkts */ + IPSTATS_MIB_ECT0PKTS, /* InECT0Pkts */ + IPSTATS_MIB_CEPKTS, /* InCEPkts */ + IPSTATS_MIB_REASM_OVERLAPS, /* ReasmOverlaps */ + IPSTATS_MIB_OUTPKTS, /* OutTransmits */ + __IPSTATS_MIB_MAX +}; + +/* icmp mib definitions */ +/* + * RFC 1213: MIB-II ICMP Group + * RFC 2011 (updates 1213): SNMPv2 MIB for IP: ICMP group + */ +enum +{ + ICMP_MIB_NUM = 0, + ICMP_MIB_INMSGS, /* InMsgs */ + ICMP_MIB_INERRORS, /* InErrors */ + ICMP_MIB_INDESTUNREACHS, /* InDestUnreachs */ + ICMP_MIB_INTIMEEXCDS, /* InTimeExcds */ + ICMP_MIB_INPARMPROBS, /* InParmProbs */ + ICMP_MIB_INSRCQUENCHS, /* InSrcQuenchs */ + ICMP_MIB_INREDIRECTS, /* InRedirects */ + ICMP_MIB_INECHOS, /* InEchos */ + ICMP_MIB_INECHOREPS, /* InEchoReps */ + ICMP_MIB_INTIMESTAMPS, /* InTimestamps */ + ICMP_MIB_INTIMESTAMPREPS, /* InTimestampReps */ + ICMP_MIB_INADDRMASKS, /* InAddrMasks */ + ICMP_MIB_INADDRMASKREPS, /* InAddrMaskReps */ + ICMP_MIB_OUTMSGS, /* OutMsgs */ + ICMP_MIB_OUTERRORS, /* OutErrors */ + ICMP_MIB_OUTDESTUNREACHS, /* OutDestUnreachs */ + ICMP_MIB_OUTTIMEEXCDS, /* OutTimeExcds */ + ICMP_MIB_OUTPARMPROBS, /* OutParmProbs */ + ICMP_MIB_OUTSRCQUENCHS, /* OutSrcQuenchs */ + ICMP_MIB_OUTREDIRECTS, /* OutRedirects */ + ICMP_MIB_OUTECHOS, /* OutEchos */ + ICMP_MIB_OUTECHOREPS, /* OutEchoReps */ + ICMP_MIB_OUTTIMESTAMPS, /* OutTimestamps */ + ICMP_MIB_OUTTIMESTAMPREPS, /* OutTimestampReps */ + ICMP_MIB_OUTADDRMASKS, /* OutAddrMasks */ + ICMP_MIB_OUTADDRMASKREPS, /* OutAddrMaskReps */ + ICMP_MIB_CSUMERRORS, /* InCsumErrors */ + ICMP_MIB_RATELIMITGLOBAL, /* OutRateLimitGlobal */ + ICMP_MIB_RATELIMITHOST, /* OutRateLimitHost */ + __ICMP_MIB_MAX +}; + +#define __ICMPMSG_MIB_MAX 512 /* Out+In for all 8-bit ICMP types */ + +/* icmp6 mib definitions */ +/* + * RFC 2466: ICMPv6-MIB + */ +enum +{ + ICMP6_MIB_NUM = 0, + ICMP6_MIB_INMSGS, /* InMsgs */ + ICMP6_MIB_INERRORS, /* InErrors */ + ICMP6_MIB_OUTMSGS, /* OutMsgs */ + ICMP6_MIB_OUTERRORS, /* OutErrors */ + ICMP6_MIB_CSUMERRORS, /* InCsumErrors */ + ICMP6_MIB_RATELIMITHOST, /* OutRateLimitHost */ + __ICMP6_MIB_MAX +}; + +#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */ + +/* tcp mib definitions */ +/* + * RFC 1213: MIB-II TCP group + * RFC 2012 (updates 1213): SNMPv2-MIB-TCP + */ +enum +{ + TCP_MIB_NUM = 0, + TCP_MIB_RTOALGORITHM, /* RtoAlgorithm */ + TCP_MIB_RTOMIN, /* RtoMin */ + TCP_MIB_RTOMAX, /* RtoMax */ + TCP_MIB_MAXCONN, /* MaxConn */ + TCP_MIB_ACTIVEOPENS, /* ActiveOpens */ + TCP_MIB_PASSIVEOPENS, /* PassiveOpens */ + TCP_MIB_ATTEMPTFAILS, /* AttemptFails */ + TCP_MIB_ESTABRESETS, /* EstabResets */ + TCP_MIB_CURRESTAB, /* CurrEstab */ + TCP_MIB_INSEGS, /* InSegs */ + TCP_MIB_OUTSEGS, /* OutSegs */ + TCP_MIB_RETRANSSEGS, /* RetransSegs */ + TCP_MIB_INERRS, /* InErrs */ + TCP_MIB_OUTRSTS, /* OutRsts */ + TCP_MIB_CSUMERRORS, /* InCsumErrors */ + __TCP_MIB_MAX +}; + +/* udp mib definitions */ +/* + * RFC 1213: MIB-II UDP group + * RFC 2013 (updates 1213): SNMPv2-MIB-UDP + */ +enum +{ + UDP_MIB_NUM = 0, + UDP_MIB_INDATAGRAMS, /* InDatagrams */ + UDP_MIB_NOPORTS, /* NoPorts */ + UDP_MIB_INERRORS, /* InErrors */ + UDP_MIB_OUTDATAGRAMS, /* OutDatagrams */ + UDP_MIB_RCVBUFERRORS, /* RcvbufErrors */ + UDP_MIB_SNDBUFERRORS, /* SndbufErrors */ + UDP_MIB_CSUMERRORS, /* InCsumErrors */ + UDP_MIB_IGNOREDMULTI, /* IgnoredMulti */ + UDP_MIB_MEMERRORS, /* MemErrors */ + __UDP_MIB_MAX +}; + +/* linux mib definitions */ +enum +{ + LINUX_MIB_NUM = 0, + LINUX_MIB_SYNCOOKIESSENT, /* SyncookiesSent */ + LINUX_MIB_SYNCOOKIESRECV, /* SyncookiesRecv */ + LINUX_MIB_SYNCOOKIESFAILED, /* SyncookiesFailed */ + LINUX_MIB_EMBRYONICRSTS, /* EmbryonicRsts */ + LINUX_MIB_PRUNECALLED, /* PruneCalled */ + LINUX_MIB_RCVPRUNED, /* RcvPruned */ + LINUX_MIB_OFOPRUNED, /* OfoPruned */ + LINUX_MIB_OUTOFWINDOWICMPS, /* OutOfWindowIcmps */ + LINUX_MIB_LOCKDROPPEDICMPS, /* LockDroppedIcmps */ + LINUX_MIB_ARPFILTER, /* ArpFilter */ + LINUX_MIB_TIMEWAITED, /* TimeWaited */ + LINUX_MIB_TIMEWAITRECYCLED, /* TimeWaitRecycled */ + LINUX_MIB_TIMEWAITKILLED, /* TimeWaitKilled */ + LINUX_MIB_PAWSACTIVEREJECTED, /* PAWSActiveRejected */ + LINUX_MIB_PAWSESTABREJECTED, /* PAWSEstabRejected */ + LINUX_MIB_DELAYEDACKS, /* DelayedACKs */ + LINUX_MIB_DELAYEDACKLOCKED, /* DelayedACKLocked */ + LINUX_MIB_DELAYEDACKLOST, /* DelayedACKLost */ + LINUX_MIB_LISTENOVERFLOWS, /* ListenOverflows */ + LINUX_MIB_LISTENDROPS, /* ListenDrops */ + LINUX_MIB_TCPHPHITS, /* TCPHPHits */ + LINUX_MIB_TCPPUREACKS, /* TCPPureAcks */ + LINUX_MIB_TCPHPACKS, /* TCPHPAcks */ + LINUX_MIB_TCPRENORECOVERY, /* TCPRenoRecovery */ + LINUX_MIB_TCPSACKRECOVERY, /* TCPSackRecovery */ + LINUX_MIB_TCPSACKRENEGING, /* TCPSACKReneging */ + LINUX_MIB_TCPSACKREORDER, /* TCPSACKReorder */ + LINUX_MIB_TCPRENOREORDER, /* TCPRenoReorder */ + LINUX_MIB_TCPTSREORDER, /* TCPTSReorder */ + LINUX_MIB_TCPFULLUNDO, /* TCPFullUndo */ + LINUX_MIB_TCPPARTIALUNDO, /* TCPPartialUndo */ + LINUX_MIB_TCPDSACKUNDO, /* TCPDSACKUndo */ + LINUX_MIB_TCPLOSSUNDO, /* TCPLossUndo */ + LINUX_MIB_TCPLOSTRETRANSMIT, /* TCPLostRetransmit */ + LINUX_MIB_TCPRENOFAILURES, /* TCPRenoFailures */ + LINUX_MIB_TCPSACKFAILURES, /* TCPSackFailures */ + LINUX_MIB_TCPLOSSFAILURES, /* TCPLossFailures */ + LINUX_MIB_TCPFASTRETRANS, /* TCPFastRetrans */ + LINUX_MIB_TCPSLOWSTARTRETRANS, /* TCPSlowStartRetrans */ + LINUX_MIB_TCPTIMEOUTS, /* TCPTimeouts */ + LINUX_MIB_TCPLOSSPROBES, /* TCPLossProbes */ + LINUX_MIB_TCPLOSSPROBERECOVERY, /* TCPLossProbeRecovery */ + LINUX_MIB_TCPRENORECOVERYFAIL, /* TCPRenoRecoveryFail */ + LINUX_MIB_TCPSACKRECOVERYFAIL, /* TCPSackRecoveryFail */ + LINUX_MIB_TCPRCVCOLLAPSED, /* TCPRcvCollapsed */ + LINUX_MIB_TCPDSACKOLDSENT, /* TCPDSACKOldSent */ + LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ + LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */ + LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */ + LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */ + LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */ + LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */ + LINUX_MIB_TCPABORTONTIMEOUT, /* TCPAbortOnTimeout */ + LINUX_MIB_TCPABORTONLINGER, /* TCPAbortOnLinger */ + LINUX_MIB_TCPABORTFAILED, /* TCPAbortFailed */ + LINUX_MIB_TCPMEMORYPRESSURES, /* TCPMemoryPressures */ + LINUX_MIB_TCPMEMORYPRESSURESCHRONO, /* TCPMemoryPressuresChrono */ + LINUX_MIB_TCPSACKDISCARD, /* TCPSACKDiscard */ + LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */ + LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */ + LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ + LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ + LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ + LINUX_MIB_TCPMD5FAILURE, /* TCPMD5Failure */ + LINUX_MIB_SACKSHIFTED, + LINUX_MIB_SACKMERGED, + LINUX_MIB_SACKSHIFTFALLBACK, + LINUX_MIB_TCPBACKLOGDROP, + LINUX_MIB_PFMEMALLOCDROP, + LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */ + LINUX_MIB_TCPDEFERACCEPTDROP, + LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */ + LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */ + LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ + LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ + LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ + LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPBACKLOGCOALESCE, /* TCPBacklogCoalesce */ + LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ + LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ + LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ + LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ + LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ + LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ + LINUX_MIB_TCPFASTOPENACTIVEFAIL, /* TCPFastOpenActiveFail */ + LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/ + LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */ + LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ + LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */ + LINUX_MIB_TCPFASTOPENBLACKHOLE, /* TCPFastOpenBlackholeDetect */ + LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ + LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ + LINUX_MIB_TCPAUTOCORKING, /* TCPAutoCorking */ + LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */ + LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */ + LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */ + LINUX_MIB_TCPSYNRETRANS, /* TCPSynRetrans */ + LINUX_MIB_TCPORIGDATASENT, /* TCPOrigDataSent */ + LINUX_MIB_TCPHYSTARTTRAINDETECT, /* TCPHystartTrainDetect */ + LINUX_MIB_TCPHYSTARTTRAINCWND, /* TCPHystartTrainCwnd */ + LINUX_MIB_TCPHYSTARTDELAYDETECT, /* TCPHystartDelayDetect */ + LINUX_MIB_TCPHYSTARTDELAYCWND, /* TCPHystartDelayCwnd */ + LINUX_MIB_TCPACKSKIPPEDSYNRECV, /* TCPACKSkippedSynRecv */ + LINUX_MIB_TCPACKSKIPPEDPAWS, /* TCPACKSkippedPAWS */ + LINUX_MIB_TCPACKSKIPPEDSEQ, /* TCPACKSkippedSeq */ + LINUX_MIB_TCPACKSKIPPEDFINWAIT2, /* TCPACKSkippedFinWait2 */ + LINUX_MIB_TCPACKSKIPPEDTIMEWAIT, /* TCPACKSkippedTimeWait */ + LINUX_MIB_TCPACKSKIPPEDCHALLENGE, /* TCPACKSkippedChallenge */ + LINUX_MIB_TCPWINPROBE, /* TCPWinProbe */ + LINUX_MIB_TCPKEEPALIVE, /* TCPKeepAlive */ + LINUX_MIB_TCPMTUPFAIL, /* TCPMTUPFail */ + LINUX_MIB_TCPMTUPSUCCESS, /* TCPMTUPSuccess */ + LINUX_MIB_TCPDELIVERED, /* TCPDelivered */ + LINUX_MIB_TCPDELIVEREDCE, /* TCPDeliveredCE */ + LINUX_MIB_TCPACKCOMPRESSED, /* TCPAckCompressed */ + LINUX_MIB_TCPZEROWINDOWDROP, /* TCPZeroWindowDrop */ + LINUX_MIB_TCPRCVQDROP, /* TCPRcvQDrop */ + LINUX_MIB_TCPWQUEUETOOBIG, /* TCPWqueueTooBig */ + LINUX_MIB_TCPFASTOPENPASSIVEALTKEY, /* TCPFastOpenPassiveAltKey */ + LINUX_MIB_TCPTIMEOUTREHASH, /* TCPTimeoutRehash */ + LINUX_MIB_TCPDUPLICATEDATAREHASH, /* TCPDuplicateDataRehash */ + LINUX_MIB_TCPDSACKRECVSEGS, /* TCPDSACKRecvSegs */ + LINUX_MIB_TCPDSACKIGNOREDDUBIOUS, /* TCPDSACKIgnoredDubious */ + LINUX_MIB_TCPMIGRATEREQSUCCESS, /* TCPMigrateReqSuccess */ + LINUX_MIB_TCPMIGRATEREQFAILURE, /* TCPMigrateReqFailure */ + LINUX_MIB_TCPPLBREHASH, /* TCPPLBRehash */ + LINUX_MIB_TCPAOREQUIRED, /* TCPAORequired */ + LINUX_MIB_TCPAOBAD, /* TCPAOBad */ + LINUX_MIB_TCPAOKEYNOTFOUND, /* TCPAOKeyNotFound */ + LINUX_MIB_TCPAOGOOD, /* TCPAOGood */ + LINUX_MIB_TCPAODROPPEDICMPS, /* TCPAODroppedIcmps */ + __LINUX_MIB_MAX +}; + +/* linux Xfrm mib definitions */ +enum +{ + LINUX_MIB_XFRMNUM = 0, + LINUX_MIB_XFRMINERROR, /* XfrmInError */ + LINUX_MIB_XFRMINBUFFERERROR, /* XfrmInBufferError */ + LINUX_MIB_XFRMINHDRERROR, /* XfrmInHdrError */ + LINUX_MIB_XFRMINNOSTATES, /* XfrmInNoStates */ + LINUX_MIB_XFRMINSTATEPROTOERROR, /* XfrmInStateProtoError */ + LINUX_MIB_XFRMINSTATEMODEERROR, /* XfrmInStateModeError */ + LINUX_MIB_XFRMINSTATESEQERROR, /* XfrmInStateSeqError */ + LINUX_MIB_XFRMINSTATEEXPIRED, /* XfrmInStateExpired */ + LINUX_MIB_XFRMINSTATEMISMATCH, /* XfrmInStateMismatch */ + LINUX_MIB_XFRMINSTATEINVALID, /* XfrmInStateInvalid */ + LINUX_MIB_XFRMINTMPLMISMATCH, /* XfrmInTmplMismatch */ + LINUX_MIB_XFRMINNOPOLS, /* XfrmInNoPols */ + LINUX_MIB_XFRMINPOLBLOCK, /* XfrmInPolBlock */ + LINUX_MIB_XFRMINPOLERROR, /* XfrmInPolError */ + LINUX_MIB_XFRMOUTERROR, /* XfrmOutError */ + LINUX_MIB_XFRMOUTBUNDLEGENERROR, /* XfrmOutBundleGenError */ + LINUX_MIB_XFRMOUTBUNDLECHECKERROR, /* XfrmOutBundleCheckError */ + LINUX_MIB_XFRMOUTNOSTATES, /* XfrmOutNoStates */ + LINUX_MIB_XFRMOUTSTATEPROTOERROR, /* XfrmOutStateProtoError */ + LINUX_MIB_XFRMOUTSTATEMODEERROR, /* XfrmOutStateModeError */ + LINUX_MIB_XFRMOUTSTATESEQERROR, /* XfrmOutStateSeqError */ + LINUX_MIB_XFRMOUTSTATEEXPIRED, /* XfrmOutStateExpired */ + LINUX_MIB_XFRMOUTPOLBLOCK, /* XfrmOutPolBlock */ + LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */ + LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ + LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ + LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ + LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ + __LINUX_MIB_XFRMMAX +}; + +/* linux TLS mib definitions */ +enum +{ + LINUX_MIB_TLSNUM = 0, + LINUX_MIB_TLSCURRTXSW, /* TlsCurrTxSw */ + LINUX_MIB_TLSCURRRXSW, /* TlsCurrRxSw */ + LINUX_MIB_TLSCURRTXDEVICE, /* TlsCurrTxDevice */ + LINUX_MIB_TLSCURRRXDEVICE, /* TlsCurrRxDevice */ + LINUX_MIB_TLSTXSW, /* TlsTxSw */ + LINUX_MIB_TLSRXSW, /* TlsRxSw */ + LINUX_MIB_TLSTXDEVICE, /* TlsTxDevice */ + LINUX_MIB_TLSRXDEVICE, /* TlsRxDevice */ + LINUX_MIB_TLSDECRYPTERROR, /* TlsDecryptError */ + LINUX_MIB_TLSRXDEVICERESYNC, /* TlsRxDeviceResync */ + LINUX_MIB_TLSDECRYPTRETRY, /* TlsDecryptRetry */ + LINUX_MIB_TLSRXNOPADVIOL, /* TlsRxNoPadViolation */ + __LINUX_MIB_TLSMAX +}; + +#endif /* _LINUX_SNMP_H */ diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h new file mode 100644 index 0000000..35c0ce6 --- /dev/null +++ b/include/uapi/linux/sock_diag.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __SOCK_DIAG_H__ +#define __SOCK_DIAG_H__ + +#include <linux/types.h> + +#define SOCK_DIAG_BY_FAMILY 20 +#define SOCK_DESTROY 21 + +struct sock_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; +}; + +enum { + SK_MEMINFO_RMEM_ALLOC, + SK_MEMINFO_RCVBUF, + SK_MEMINFO_WMEM_ALLOC, + SK_MEMINFO_SNDBUF, + SK_MEMINFO_FWD_ALLOC, + SK_MEMINFO_WMEM_QUEUED, + SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, + SK_MEMINFO_DROPS, + + SK_MEMINFO_VARS, +}; + +enum sknetlink_groups { + SKNLGRP_NONE, + SKNLGRP_INET_TCP_DESTROY, + SKNLGRP_INET_UDP_DESTROY, + SKNLGRP_INET6_TCP_DESTROY, + SKNLGRP_INET6_UDP_DESTROY, + __SKNLGRP_MAX, +}; +#define SKNLGRP_MAX (__SKNLGRP_MAX - 1) + +enum { + SK_DIAG_BPF_STORAGE_REQ_NONE, + SK_DIAG_BPF_STORAGE_REQ_MAP_FD, + __SK_DIAG_BPF_STORAGE_REQ_MAX, +}; + +#define SK_DIAG_BPF_STORAGE_REQ_MAX (__SK_DIAG_BPF_STORAGE_REQ_MAX - 1) + +enum { + SK_DIAG_BPF_STORAGE_REP_NONE, + SK_DIAG_BPF_STORAGE, + __SK_DIAG_BPF_STORAGE_REP_MAX, +}; + +#define SK_DIAB_BPF_STORAGE_REP_MAX (__SK_DIAG_BPF_STORAGE_REP_MAX - 1) + +enum { + SK_DIAG_BPF_STORAGE_NONE, + SK_DIAG_BPF_STORAGE_PAD, + SK_DIAG_BPF_STORAGE_MAP_ID, + SK_DIAG_BPF_STORAGE_MAP_VALUE, + __SK_DIAG_BPF_STORAGE_MAX, +}; + +#define SK_DIAG_BPF_STORAGE_MAX (__SK_DIAG_BPF_STORAGE_MAX - 1) + +#endif /* __SOCK_DIAG_H__ */ diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h new file mode 100644 index 0000000..89c227f --- /dev/null +++ b/include/uapi/linux/socket.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_SOCKET_H +#define _LINUX_SOCKET_H + +/* + * Desired design of maximum size and alignment (see RFC2553) + */ +#define _K_SS_MAXSIZE 128 /* Implementation specific max size */ + +typedef unsigned short __kernel_sa_family_t; + +/* + * The definition uses anonymous union and struct in order to control the + * default alignment. + */ +struct __kernel_sockaddr_storage { + union { + struct { + __kernel_sa_family_t ss_family; /* address family */ + /* Following field(s) are implementation specific */ + char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; + /* space to achieve desired size, */ + /* _SS_MAXSIZE value minus size of ss_family */ + }; + void *__align; /* implementation specific desired alignment */ + }; +}; + +#define SOCK_SNDBUF_LOCK 1 +#define SOCK_RCVBUF_LOCK 2 + +#define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK) + +#define SOCK_TXREHASH_DEFAULT 255 +#define SOCK_TXREHASH_DISABLED 0 +#define SOCK_TXREHASH_ENABLED 1 + +#endif /* _LINUX_SOCKET_H */ diff --git a/include/uapi/linux/sockios.h b/include/uapi/linux/sockios.h new file mode 100644 index 0000000..7d1bccb --- /dev/null +++ b/include/uapi/linux/sockios.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions of the socket-level I/O control calls. + * + * Version: @(#)sockios.h 1.0.2 03/09/93 + * + * Authors: Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_SOCKIOS_H +#define _LINUX_SOCKIOS_H + +#include <asm/bitsperlong.h> +#include <asm/sockios.h> + +/* Linux-specific socket ioctls */ +#define SIOCINQ FIONREAD +#define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ + +#define SOCK_IOC_TYPE 0x89 + +/* + * the timeval/timespec data structure layout is defined by libc, + * so we need to cover both possible versions on 32-bit. + */ +/* Get stamp (timeval) */ +#define SIOCGSTAMP_NEW _IOR(SOCK_IOC_TYPE, 0x06, long long[2]) +/* Get stamp (timespec) */ +#define SIOCGSTAMPNS_NEW _IOR(SOCK_IOC_TYPE, 0x07, long long[2]) + +#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) +/* on 64-bit and x32, avoid the ?: operator */ +#define SIOCGSTAMP SIOCGSTAMP_OLD +#define SIOCGSTAMPNS SIOCGSTAMPNS_OLD +#else +#define SIOCGSTAMP ((sizeof(struct timeval)) == 8 ? \ + SIOCGSTAMP_OLD : SIOCGSTAMP_NEW) +#define SIOCGSTAMPNS ((sizeof(struct timespec)) == 8 ? \ + SIOCGSTAMPNS_OLD : SIOCGSTAMPNS_NEW) +#endif + +/* Routing table calls. */ +#define SIOCADDRT 0x890B /* add routing table entry */ +#define SIOCDELRT 0x890C /* delete routing table entry */ +#define SIOCRTMSG 0x890D /* unused */ + +/* Socket configuration controls. */ +#define SIOCGIFNAME 0x8910 /* get iface name */ +#define SIOCSIFLINK 0x8911 /* set iface channel */ +#define SIOCGIFCONF 0x8912 /* get iface list */ +#define SIOCGIFFLAGS 0x8913 /* get flags */ +#define SIOCSIFFLAGS 0x8914 /* set flags */ +#define SIOCGIFADDR 0x8915 /* get PA address */ +#define SIOCSIFADDR 0x8916 /* set PA address */ +#define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ +#define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ +#define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ +#define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ +#define SIOCGIFNETMASK 0x891b /* get network PA mask */ +#define SIOCSIFNETMASK 0x891c /* set network PA mask */ +#define SIOCGIFMETRIC 0x891d /* get metric */ +#define SIOCSIFMETRIC 0x891e /* set metric */ +#define SIOCGIFMEM 0x891f /* get memory address (BSD) */ +#define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ +#define SIOCGIFMTU 0x8921 /* get MTU size */ +#define SIOCSIFMTU 0x8922 /* set MTU size */ +#define SIOCSIFNAME 0x8923 /* set interface name */ +#define SIOCSIFHWADDR 0x8924 /* set hardware address */ +#define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ +#define SIOCSIFENCAP 0x8926 +#define SIOCGIFHWADDR 0x8927 /* Get hardware address */ +#define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ +#define SIOCSIFSLAVE 0x8930 +#define SIOCADDMULTI 0x8931 /* Multicast address lists */ +#define SIOCDELMULTI 0x8932 +#define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ +#define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ +#define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ +#define SIOCGIFPFLAGS 0x8935 +#define SIOCDIFADDR 0x8936 /* delete PA address */ +#define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ +#define SIOCGIFCOUNT 0x8938 /* get number of devices */ + +#define SIOCGIFBR 0x8940 /* Bridging support */ +#define SIOCSIFBR 0x8941 /* Set bridging options */ + +#define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ +#define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ + +/* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ +/* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ + +#define SIOCETHTOOL 0x8946 /* Ethtool interface */ + +#define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ +#define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ +#define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ + +#define SIOCWANDEV 0x894A /* get/set netdev parameters */ + +#define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ +#define SIOCGSKNS 0x894C /* get socket network namespace */ + +/* ARP cache control calls. */ + /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ +#define SIOCDARP 0x8953 /* delete ARP table entry */ +#define SIOCGARP 0x8954 /* get ARP table entry */ +#define SIOCSARP 0x8955 /* set ARP table entry */ + +/* RARP cache control calls. */ +#define SIOCDRARP 0x8960 /* delete RARP table entry */ +#define SIOCGRARP 0x8961 /* get RARP table entry */ +#define SIOCSRARP 0x8962 /* set RARP table entry */ + +/* Driver configuration calls */ + +#define SIOCGIFMAP 0x8970 /* Get device parameters */ +#define SIOCSIFMAP 0x8971 /* Set device parameters */ + +/* DLCI configuration calls */ + +#define SIOCADDDLCI 0x8980 /* Create new DLCI device */ +#define SIOCDELDLCI 0x8981 /* Delete DLCI device */ + +#define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ +#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ + +/* bonding calls */ + +#define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ +#define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ +#define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ +#define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ +#define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ +#define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ + +/* bridge calls */ +#define SIOCBRADDBR 0x89a0 /* create new bridge device */ +#define SIOCBRDELBR 0x89a1 /* remove bridge device */ +#define SIOCBRADDIF 0x89a2 /* add interface to bridge */ +#define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ + +/* hardware time stamping: parameters in linux/net_tstamp.h */ +#define SIOCSHWTSTAMP 0x89b0 /* set and get config */ +#define SIOCGHWTSTAMP 0x89b1 /* get config */ + +/* Device private ioctl calls */ + +/* + * These 16 ioctls are available to devices via the do_ioctl() device + * vector. Each device should include this file and redefine these names + * as their own. Because these are device dependent it is a good idea + * _NOT_ to issue them to random objects and hope. + * + * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM + */ + +#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ + +/* + * These 16 ioctl calls are protocol private + */ + +#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ +#endif /* _LINUX_SOCKIOS_H */ diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h new file mode 100644 index 0000000..bf9749d --- /dev/null +++ b/include/uapi/linux/stddef.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_STDDEF_H +#define _LINUX_STDDEF_H + + + +#ifndef __always_inline +#define __always_inline __inline__ +#endif + +/** + * __struct_group() - Create a mirrored named and anonyomous struct + * + * @TAG: The tag name for the named sub-struct (usually empty) + * @NAME: The identifier name of the mirrored sub-struct + * @ATTRS: Any struct attributes (usually empty) + * @MEMBERS: The member declarations for the mirrored structs + * + * Used to create an anonymous union of two structs with identical layout + * and size: one anonymous and one named. The former's members can be used + * normally without sub-struct naming, and the latter can be used to + * reason about the start, end, and size of the group of struct members. + * The named struct can also be explicitly tagged for layer reuse, as well + * as both having struct attributes appended. + */ +#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ + union { \ + struct { MEMBERS } ATTRS; \ + struct TAG { MEMBERS } ATTRS NAME; \ + } ATTRS + +#ifdef __cplusplus +/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */ +#define __DECLARE_FLEX_ARRAY(T, member) \ + T member[0] +#else +/** + * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } +#endif + +#ifndef __counted_by +#define __counted_by(m) +#endif + +#endif /* _LINUX_STDDEF_H */ diff --git a/include/uapi/linux/sysinfo.h b/include/uapi/linux/sysinfo.h new file mode 100644 index 0000000..435d5c2 --- /dev/null +++ b/include/uapi/linux/sysinfo.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_SYSINFO_H +#define _LINUX_SYSINFO_H + +#include <linux/types.h> + +#define SI_LOAD_SHIFT 16 +struct sysinfo { + __kernel_long_t uptime; /* Seconds since boot */ + __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */ + __kernel_ulong_t totalram; /* Total usable main memory size */ + __kernel_ulong_t freeram; /* Available memory size */ + __kernel_ulong_t sharedram; /* Amount of shared memory */ + __kernel_ulong_t bufferram; /* Memory used by buffers */ + __kernel_ulong_t totalswap; /* Total swap space size */ + __kernel_ulong_t freeswap; /* swap space still available */ + __u16 procs; /* Number of current processes */ + __u16 pad; /* Explicit padding for m68k */ + __kernel_ulong_t totalhigh; /* Total high memory size */ + __kernel_ulong_t freehigh; /* Available high memory size */ + __u32 mem_unit; /* Memory unit size in bytes */ + char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */ +}; + +#endif /* _LINUX_SYSINFO_H */ diff --git a/include/uapi/linux/tc_act/tc_bpf.h b/include/uapi/linux/tc_act/tc_bpf.h new file mode 100644 index 0000000..fe6c8f8 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_bpf.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (c) 2015 Jiri Pirko <jiri@resnulli.us> + */ + +#ifndef __LINUX_TC_BPF_H +#define __LINUX_TC_BPF_H + +#include <linux/pkt_cls.h> + +struct tc_act_bpf { + tc_gen; +}; + +enum { + TCA_ACT_BPF_UNSPEC, + TCA_ACT_BPF_TM, + TCA_ACT_BPF_PARMS, + TCA_ACT_BPF_OPS_LEN, + TCA_ACT_BPF_OPS, + TCA_ACT_BPF_FD, + TCA_ACT_BPF_NAME, + TCA_ACT_BPF_PAD, + TCA_ACT_BPF_TAG, + TCA_ACT_BPF_ID, + __TCA_ACT_BPF_MAX, +}; +#define TCA_ACT_BPF_MAX (__TCA_ACT_BPF_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_connmark.h b/include/uapi/linux/tc_act/tc_connmark.h new file mode 100644 index 0000000..9f8f6f7 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_connmark.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UAPI_TC_CONNMARK_H +#define __UAPI_TC_CONNMARK_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +struct tc_connmark { + tc_gen; + __u16 zone; +}; + +enum { + TCA_CONNMARK_UNSPEC, + TCA_CONNMARK_PARMS, + TCA_CONNMARK_TM, + TCA_CONNMARK_PAD, + __TCA_CONNMARK_MAX +}; +#define TCA_CONNMARK_MAX (__TCA_CONNMARK_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_csum.h b/include/uapi/linux/tc_act/tc_csum.h new file mode 100644 index 0000000..94b2044 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_csum.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_CSUM_H +#define __LINUX_TC_CSUM_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +enum { + TCA_CSUM_UNSPEC, + TCA_CSUM_PARMS, + TCA_CSUM_TM, + TCA_CSUM_PAD, + __TCA_CSUM_MAX +}; +#define TCA_CSUM_MAX (__TCA_CSUM_MAX - 1) + +enum { + TCA_CSUM_UPDATE_FLAG_IPV4HDR = 1, + TCA_CSUM_UPDATE_FLAG_ICMP = 2, + TCA_CSUM_UPDATE_FLAG_IGMP = 4, + TCA_CSUM_UPDATE_FLAG_TCP = 8, + TCA_CSUM_UPDATE_FLAG_UDP = 16, + TCA_CSUM_UPDATE_FLAG_UDPLITE = 32, + TCA_CSUM_UPDATE_FLAG_SCTP = 64, +}; + +struct tc_csum { + tc_gen; + + __u32 update_flags; +}; + +#endif /* __LINUX_TC_CSUM_H */ diff --git a/include/uapi/linux/tc_act/tc_ct.h b/include/uapi/linux/tc_act/tc_ct.h new file mode 100644 index 0000000..6c5200f --- /dev/null +++ b/include/uapi/linux/tc_act/tc_ct.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UAPI_TC_CT_H +#define __UAPI_TC_CT_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +enum { + TCA_CT_UNSPEC, + TCA_CT_PARMS, + TCA_CT_TM, + TCA_CT_ACTION, /* u16 */ + TCA_CT_ZONE, /* u16 */ + TCA_CT_MARK, /* u32 */ + TCA_CT_MARK_MASK, /* u32 */ + TCA_CT_LABELS, /* u128 */ + TCA_CT_LABELS_MASK, /* u128 */ + TCA_CT_NAT_IPV4_MIN, /* be32 */ + TCA_CT_NAT_IPV4_MAX, /* be32 */ + TCA_CT_NAT_IPV6_MIN, /* struct in6_addr */ + TCA_CT_NAT_IPV6_MAX, /* struct in6_addr */ + TCA_CT_NAT_PORT_MIN, /* be16 */ + TCA_CT_NAT_PORT_MAX, /* be16 */ + TCA_CT_PAD, + TCA_CT_HELPER_NAME, /* string */ + TCA_CT_HELPER_FAMILY, /* u8 */ + TCA_CT_HELPER_PROTO, /* u8 */ + __TCA_CT_MAX +}; + +#define TCA_CT_MAX (__TCA_CT_MAX - 1) + +#define TCA_CT_ACT_COMMIT (1 << 0) +#define TCA_CT_ACT_FORCE (1 << 1) +#define TCA_CT_ACT_CLEAR (1 << 2) +#define TCA_CT_ACT_NAT (1 << 3) +#define TCA_CT_ACT_NAT_SRC (1 << 4) +#define TCA_CT_ACT_NAT_DST (1 << 5) + +struct tc_ct { + tc_gen; +}; + +#endif /* __UAPI_TC_CT_H */ diff --git a/include/uapi/linux/tc_act/tc_ctinfo.h b/include/uapi/linux/tc_act/tc_ctinfo.h new file mode 100644 index 0000000..f5f26d9 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_ctinfo.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UAPI_TC_CTINFO_H +#define __UAPI_TC_CTINFO_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +struct tc_ctinfo { + tc_gen; +}; + +enum { + TCA_CTINFO_UNSPEC, + TCA_CTINFO_PAD, + TCA_CTINFO_TM, + TCA_CTINFO_ACT, + TCA_CTINFO_ZONE, + TCA_CTINFO_PARMS_DSCP_MASK, + TCA_CTINFO_PARMS_DSCP_STATEMASK, + TCA_CTINFO_PARMS_CPMARK_MASK, + TCA_CTINFO_STATS_DSCP_SET, + TCA_CTINFO_STATS_DSCP_ERROR, + TCA_CTINFO_STATS_CPMARK_SET, + __TCA_CTINFO_MAX +}; + +#define TCA_CTINFO_MAX (__TCA_CTINFO_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_defact.h b/include/uapi/linux/tc_act/tc_defact.h new file mode 100644 index 0000000..e3ecd8b --- /dev/null +++ b/include/uapi/linux/tc_act/tc_defact.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_DEF_H +#define __LINUX_TC_DEF_H + +#include <linux/pkt_cls.h> + +struct tc_defact { + tc_gen; +}; + +enum { + TCA_DEF_UNSPEC, + TCA_DEF_TM, + TCA_DEF_PARMS, + TCA_DEF_DATA, + TCA_DEF_PAD, + __TCA_DEF_MAX +}; +#define TCA_DEF_MAX (__TCA_DEF_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_gact.h b/include/uapi/linux/tc_act/tc_gact.h new file mode 100644 index 0000000..37e5392 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_gact.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_GACT_H +#define __LINUX_TC_GACT_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +struct tc_gact { + tc_gen; + +}; + +struct tc_gact_p { +#define PGACT_NONE 0 +#define PGACT_NETRAND 1 +#define PGACT_DETERM 2 +#define MAX_RAND (PGACT_DETERM + 1 ) + __u16 ptype; + __u16 pval; + int paction; +}; + +enum { + TCA_GACT_UNSPEC, + TCA_GACT_TM, + TCA_GACT_PARMS, + TCA_GACT_PROB, + TCA_GACT_PAD, + __TCA_GACT_MAX +}; +#define TCA_GACT_MAX (__TCA_GACT_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_gate.h b/include/uapi/linux/tc_act/tc_gate.h new file mode 100644 index 0000000..f214b3a --- /dev/null +++ b/include/uapi/linux/tc_act/tc_gate.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* Copyright 2020 NXP */ + +#ifndef __LINUX_TC_GATE_H +#define __LINUX_TC_GATE_H + +#include <linux/pkt_cls.h> + +struct tc_gate { + tc_gen; +}; + +enum { + TCA_GATE_ENTRY_UNSPEC, + TCA_GATE_ENTRY_INDEX, + TCA_GATE_ENTRY_GATE, + TCA_GATE_ENTRY_INTERVAL, + TCA_GATE_ENTRY_IPV, + TCA_GATE_ENTRY_MAX_OCTETS, + __TCA_GATE_ENTRY_MAX, +}; +#define TCA_GATE_ENTRY_MAX (__TCA_GATE_ENTRY_MAX - 1) + +enum { + TCA_GATE_ONE_ENTRY_UNSPEC, + TCA_GATE_ONE_ENTRY, + __TCA_GATE_ONE_ENTRY_MAX, +}; +#define TCA_GATE_ONE_ENTRY_MAX (__TCA_GATE_ONE_ENTRY_MAX - 1) + +enum { + TCA_GATE_UNSPEC, + TCA_GATE_TM, + TCA_GATE_PARMS, + TCA_GATE_PAD, + TCA_GATE_PRIORITY, + TCA_GATE_ENTRY_LIST, + TCA_GATE_BASE_TIME, + TCA_GATE_CYCLE_TIME, + TCA_GATE_CYCLE_TIME_EXT, + TCA_GATE_FLAGS, + TCA_GATE_CLOCKID, + __TCA_GATE_MAX, +}; +#define TCA_GATE_MAX (__TCA_GATE_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_ife.h b/include/uapi/linux/tc_act/tc_ife.h new file mode 100644 index 0000000..8c401f1 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_ife.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UAPI_TC_IFE_H +#define __UAPI_TC_IFE_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> +#include <linux/ife.h> + +/* Flag bits for now just encoding/decoding; mutually exclusive */ +#define IFE_ENCODE 1 +#define IFE_DECODE 0 + +struct tc_ife { + tc_gen; + __u16 flags; +}; + +/*XXX: We need to encode the total number of bytes consumed */ +enum { + TCA_IFE_UNSPEC, + TCA_IFE_PARMS, + TCA_IFE_TM, + TCA_IFE_DMAC, + TCA_IFE_SMAC, + TCA_IFE_TYPE, + TCA_IFE_METALST, + TCA_IFE_PAD, + __TCA_IFE_MAX +}; +#define TCA_IFE_MAX (__TCA_IFE_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_mirred.h b/include/uapi/linux/tc_act/tc_mirred.h new file mode 100644 index 0000000..c61e76f --- /dev/null +++ b/include/uapi/linux/tc_act/tc_mirred.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_MIR_H +#define __LINUX_TC_MIR_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +#define TCA_EGRESS_REDIR 1 /* packet redirect to EGRESS*/ +#define TCA_EGRESS_MIRROR 2 /* mirror packet to EGRESS */ +#define TCA_INGRESS_REDIR 3 /* packet redirect to INGRESS*/ +#define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */ + +struct tc_mirred { + tc_gen; + int eaction; /* one of IN/EGRESS_MIRROR/REDIR */ + __u32 ifindex; /* ifindex of egress port */ +}; + +enum { + TCA_MIRRED_UNSPEC, + TCA_MIRRED_TM, + TCA_MIRRED_PARMS, + TCA_MIRRED_PAD, + TCA_MIRRED_BLOCKID, + __TCA_MIRRED_MAX +}; +#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_mpls.h b/include/uapi/linux/tc_act/tc_mpls.h new file mode 100644 index 0000000..9e4e8f5 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_mpls.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (C) 2019 Netronome Systems, Inc. */ + +#ifndef __LINUX_TC_MPLS_H +#define __LINUX_TC_MPLS_H + +#include <linux/pkt_cls.h> + +#define TCA_MPLS_ACT_POP 1 +#define TCA_MPLS_ACT_PUSH 2 +#define TCA_MPLS_ACT_MODIFY 3 +#define TCA_MPLS_ACT_DEC_TTL 4 +#define TCA_MPLS_ACT_MAC_PUSH 5 + +struct tc_mpls { + tc_gen; /* generic TC action fields. */ + int m_action; /* action of type TCA_MPLS_ACT_*. */ +}; + +enum { + TCA_MPLS_UNSPEC, + TCA_MPLS_TM, /* struct tcf_t; time values associated with action. */ + TCA_MPLS_PARMS, /* struct tc_mpls; action type and general TC fields. */ + TCA_MPLS_PAD, + TCA_MPLS_PROTO, /* be16; eth_type of pushed or next (for pop) header. */ + TCA_MPLS_LABEL, /* u32; MPLS label. Lower 20 bits are used. */ + TCA_MPLS_TC, /* u8; MPLS TC field. Lower 3 bits are used. */ + TCA_MPLS_TTL, /* u8; MPLS TTL field. Must not be 0. */ + TCA_MPLS_BOS, /* u8; MPLS BOS field. Either 1 or 0. */ + __TCA_MPLS_MAX, +}; +#define TCA_MPLS_MAX (__TCA_MPLS_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_nat.h b/include/uapi/linux/tc_act/tc_nat.h new file mode 100644 index 0000000..21399c2 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_nat.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_NAT_H +#define __LINUX_TC_NAT_H + +#include <linux/pkt_cls.h> +#include <linux/types.h> + +enum { + TCA_NAT_UNSPEC, + TCA_NAT_PARMS, + TCA_NAT_TM, + TCA_NAT_PAD, + __TCA_NAT_MAX +}; +#define TCA_NAT_MAX (__TCA_NAT_MAX - 1) + +#define TCA_NAT_FLAG_EGRESS 1 + +struct tc_nat { + tc_gen; + __be32 old_addr; + __be32 new_addr; + __be32 mask; + __u32 flags; +}; + +#endif diff --git a/include/uapi/linux/tc_act/tc_pedit.h b/include/uapi/linux/tc_act/tc_pedit.h new file mode 100644 index 0000000..f3e61b0 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_pedit.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_PED_H +#define __LINUX_TC_PED_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +enum { + TCA_PEDIT_UNSPEC, + TCA_PEDIT_TM, + TCA_PEDIT_PARMS, + TCA_PEDIT_PAD, + TCA_PEDIT_PARMS_EX, + TCA_PEDIT_KEYS_EX, + TCA_PEDIT_KEY_EX, + __TCA_PEDIT_MAX +}; + +#define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1) + +enum { + TCA_PEDIT_KEY_EX_HTYPE = 1, + TCA_PEDIT_KEY_EX_CMD = 2, + __TCA_PEDIT_KEY_EX_MAX +}; + +#define TCA_PEDIT_KEY_EX_MAX (__TCA_PEDIT_KEY_EX_MAX - 1) + + /* TCA_PEDIT_KEY_EX_HDR_TYPE_NETWROK is a special case for legacy users. It + * means no specific header type - offset is relative to the network layer + */ +enum pedit_header_type { + TCA_PEDIT_KEY_EX_HDR_TYPE_NETWORK = 0, + TCA_PEDIT_KEY_EX_HDR_TYPE_ETH = 1, + TCA_PEDIT_KEY_EX_HDR_TYPE_IP4 = 2, + TCA_PEDIT_KEY_EX_HDR_TYPE_IP6 = 3, + TCA_PEDIT_KEY_EX_HDR_TYPE_TCP = 4, + TCA_PEDIT_KEY_EX_HDR_TYPE_UDP = 5, + __PEDIT_HDR_TYPE_MAX, +}; + +#define TCA_PEDIT_HDR_TYPE_MAX (__PEDIT_HDR_TYPE_MAX - 1) + +enum pedit_cmd { + TCA_PEDIT_KEY_EX_CMD_SET = 0, + TCA_PEDIT_KEY_EX_CMD_ADD = 1, + __PEDIT_CMD_MAX, +}; + +#define TCA_PEDIT_CMD_MAX (__PEDIT_CMD_MAX - 1) + +struct tc_pedit_key { + __u32 mask; /* AND */ + __u32 val; /*XOR */ + __u32 off; /*offset */ + __u32 at; + __u32 offmask; + __u32 shift; +}; + +struct tc_pedit_sel { + tc_gen; + unsigned char nkeys; + unsigned char flags; + struct tc_pedit_key keys[0]; +}; + +#define tc_pedit tc_pedit_sel + +#endif diff --git a/include/uapi/linux/tc_act/tc_sample.h b/include/uapi/linux/tc_act/tc_sample.h new file mode 100644 index 0000000..fee1bcc --- /dev/null +++ b/include/uapi/linux/tc_act/tc_sample.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_SAMPLE_H +#define __LINUX_TC_SAMPLE_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> +#include <linux/if_ether.h> + +struct tc_sample { + tc_gen; +}; + +enum { + TCA_SAMPLE_UNSPEC, + TCA_SAMPLE_TM, + TCA_SAMPLE_PARMS, + TCA_SAMPLE_RATE, + TCA_SAMPLE_TRUNC_SIZE, + TCA_SAMPLE_PSAMPLE_GROUP, + TCA_SAMPLE_PAD, + __TCA_SAMPLE_MAX +}; +#define TCA_SAMPLE_MAX (__TCA_SAMPLE_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_skbedit.h b/include/uapi/linux/tc_act/tc_skbedit.h new file mode 100644 index 0000000..6403251 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_skbedit.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2008, Intel Corporation. + * + * Author: Alexander Duyck <alexander.h.duyck@intel.com> + */ + +#ifndef __LINUX_TC_SKBEDIT_H +#define __LINUX_TC_SKBEDIT_H + +#include <linux/pkt_cls.h> + +#define SKBEDIT_F_PRIORITY 0x1 +#define SKBEDIT_F_QUEUE_MAPPING 0x2 +#define SKBEDIT_F_MARK 0x4 +#define SKBEDIT_F_PTYPE 0x8 +#define SKBEDIT_F_MASK 0x10 +#define SKBEDIT_F_INHERITDSFIELD 0x20 +#define SKBEDIT_F_TXQ_SKBHASH 0x40 + +struct tc_skbedit { + tc_gen; +}; + +enum { + TCA_SKBEDIT_UNSPEC, + TCA_SKBEDIT_TM, + TCA_SKBEDIT_PARMS, + TCA_SKBEDIT_PRIORITY, + TCA_SKBEDIT_QUEUE_MAPPING, + TCA_SKBEDIT_MARK, + TCA_SKBEDIT_PAD, + TCA_SKBEDIT_PTYPE, + TCA_SKBEDIT_MASK, + TCA_SKBEDIT_FLAGS, + TCA_SKBEDIT_QUEUE_MAPPING_MAX, + __TCA_SKBEDIT_MAX +}; +#define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_skbmod.h b/include/uapi/linux/tc_act/tc_skbmod.h new file mode 100644 index 0000000..ac62c9a --- /dev/null +++ b/include/uapi/linux/tc_act/tc_skbmod.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (c) 2016, Jamal Hadi Salim + */ + +#ifndef __LINUX_TC_SKBMOD_H +#define __LINUX_TC_SKBMOD_H + +#include <linux/pkt_cls.h> + +#define SKBMOD_F_DMAC 0x1 +#define SKBMOD_F_SMAC 0x2 +#define SKBMOD_F_ETYPE 0x4 +#define SKBMOD_F_SWAPMAC 0x8 +#define SKBMOD_F_ECN 0x10 + +struct tc_skbmod { + tc_gen; + __u64 flags; +}; + +enum { + TCA_SKBMOD_UNSPEC, + TCA_SKBMOD_TM, + TCA_SKBMOD_PARMS, + TCA_SKBMOD_DMAC, + TCA_SKBMOD_SMAC, + TCA_SKBMOD_ETYPE, + TCA_SKBMOD_PAD, + __TCA_SKBMOD_MAX +}; +#define TCA_SKBMOD_MAX (__TCA_SKBMOD_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_tunnel_key.h b/include/uapi/linux/tc_act/tc_tunnel_key.h new file mode 100644 index 0000000..37c6f61 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_tunnel_key.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (c) 2016, Amir Vadai <amir@vadai.me> + * Copyright (c) 2016, Mellanox Technologies. All rights reserved. + */ + +#ifndef __LINUX_TC_TUNNEL_KEY_H +#define __LINUX_TC_TUNNEL_KEY_H + +#include <linux/pkt_cls.h> + +#define TCA_TUNNEL_KEY_ACT_SET 1 +#define TCA_TUNNEL_KEY_ACT_RELEASE 2 + +struct tc_tunnel_key { + tc_gen; + int t_action; +}; + +enum { + TCA_TUNNEL_KEY_UNSPEC, + TCA_TUNNEL_KEY_TM, + TCA_TUNNEL_KEY_PARMS, + TCA_TUNNEL_KEY_ENC_IPV4_SRC, /* be32 */ + TCA_TUNNEL_KEY_ENC_IPV4_DST, /* be32 */ + TCA_TUNNEL_KEY_ENC_IPV6_SRC, /* struct in6_addr */ + TCA_TUNNEL_KEY_ENC_IPV6_DST, /* struct in6_addr */ + TCA_TUNNEL_KEY_ENC_KEY_ID, /* be64 */ + TCA_TUNNEL_KEY_PAD, + TCA_TUNNEL_KEY_ENC_DST_PORT, /* be16 */ + TCA_TUNNEL_KEY_NO_CSUM, /* u8 */ + TCA_TUNNEL_KEY_ENC_OPTS, /* Nested TCA_TUNNEL_KEY_ENC_OPTS_ + * attributes + */ + TCA_TUNNEL_KEY_ENC_TOS, /* u8 */ + TCA_TUNNEL_KEY_ENC_TTL, /* u8 */ + TCA_TUNNEL_KEY_NO_FRAG, /* flag */ + __TCA_TUNNEL_KEY_MAX, +}; + +#define TCA_TUNNEL_KEY_MAX (__TCA_TUNNEL_KEY_MAX - 1) + +enum { + TCA_TUNNEL_KEY_ENC_OPTS_UNSPEC, + TCA_TUNNEL_KEY_ENC_OPTS_GENEVE, /* Nested + * TCA_TUNNEL_KEY_ENC_OPTS_ + * attributes + */ + TCA_TUNNEL_KEY_ENC_OPTS_VXLAN, /* Nested + * TCA_TUNNEL_KEY_ENC_OPTS_ + * attributes + */ + TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN, /* Nested + * TCA_TUNNEL_KEY_ENC_OPTS_ + * attributes + */ + __TCA_TUNNEL_KEY_ENC_OPTS_MAX, +}; + +#define TCA_TUNNEL_KEY_ENC_OPTS_MAX (__TCA_TUNNEL_KEY_ENC_OPTS_MAX - 1) + +enum { + TCA_TUNNEL_KEY_ENC_OPT_GENEVE_UNSPEC, + TCA_TUNNEL_KEY_ENC_OPT_GENEVE_CLASS, /* be16 */ + TCA_TUNNEL_KEY_ENC_OPT_GENEVE_TYPE, /* u8 */ + TCA_TUNNEL_KEY_ENC_OPT_GENEVE_DATA, /* 4 to 128 bytes */ + + __TCA_TUNNEL_KEY_ENC_OPT_GENEVE_MAX, +}; + +#define TCA_TUNNEL_KEY_ENC_OPT_GENEVE_MAX \ + (__TCA_TUNNEL_KEY_ENC_OPT_GENEVE_MAX - 1) + +enum { + TCA_TUNNEL_KEY_ENC_OPT_VXLAN_UNSPEC, + TCA_TUNNEL_KEY_ENC_OPT_VXLAN_GBP, /* u32 */ + __TCA_TUNNEL_KEY_ENC_OPT_VXLAN_MAX, +}; + +#define TCA_TUNNEL_KEY_ENC_OPT_VXLAN_MAX \ + (__TCA_TUNNEL_KEY_ENC_OPT_VXLAN_MAX - 1) + +enum { + TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_UNSPEC, + TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_VER, /* u8 */ + TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_INDEX, /* be32 */ + TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_DIR, /* u8 */ + TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_HWID, /* u8 */ + __TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_MAX, +}; + +#define TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_MAX \ + (__TCA_TUNNEL_KEY_ENC_OPT_ERSPAN_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_vlan.h b/include/uapi/linux/tc_act/tc_vlan.h new file mode 100644 index 0000000..3e1f8e5 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_vlan.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us> + */ + +#ifndef __LINUX_TC_VLAN_H +#define __LINUX_TC_VLAN_H + +#include <linux/pkt_cls.h> + +#define TCA_VLAN_ACT_POP 1 +#define TCA_VLAN_ACT_PUSH 2 +#define TCA_VLAN_ACT_MODIFY 3 +#define TCA_VLAN_ACT_POP_ETH 4 +#define TCA_VLAN_ACT_PUSH_ETH 5 + +struct tc_vlan { + tc_gen; + int v_action; +}; + +enum { + TCA_VLAN_UNSPEC, + TCA_VLAN_TM, + TCA_VLAN_PARMS, + TCA_VLAN_PUSH_VLAN_ID, + TCA_VLAN_PUSH_VLAN_PROTOCOL, + TCA_VLAN_PAD, + TCA_VLAN_PUSH_VLAN_PRIORITY, + TCA_VLAN_PUSH_ETH_DST, + TCA_VLAN_PUSH_ETH_SRC, + __TCA_VLAN_MAX, +}; +#define TCA_VLAN_MAX (__TCA_VLAN_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_ematch/tc_em_cmp.h b/include/uapi/linux/tc_ematch/tc_em_cmp.h new file mode 100644 index 0000000..2549d9d --- /dev/null +++ b/include/uapi/linux/tc_ematch/tc_em_cmp.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_EM_CMP_H +#define __LINUX_TC_EM_CMP_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +struct tcf_em_cmp { + __u32 val; + __u32 mask; + __u16 off; + __u8 align:4; + __u8 flags:4; + __u8 layer:4; + __u8 opnd:4; +}; + +enum { + TCF_EM_ALIGN_U8 = 1, + TCF_EM_ALIGN_U16 = 2, + TCF_EM_ALIGN_U32 = 4 +}; + +#define TCF_EM_CMP_TRANS 1 + +#endif diff --git a/include/uapi/linux/tc_ematch/tc_em_ipt.h b/include/uapi/linux/tc_ematch/tc_em_ipt.h new file mode 100644 index 0000000..49a6553 --- /dev/null +++ b/include/uapi/linux/tc_ematch/tc_em_ipt.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_EM_IPT_H +#define __LINUX_TC_EM_IPT_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +enum { + TCA_EM_IPT_UNSPEC, + TCA_EM_IPT_HOOK, + TCA_EM_IPT_MATCH_NAME, + TCA_EM_IPT_MATCH_REVISION, + TCA_EM_IPT_NFPROTO, + TCA_EM_IPT_MATCH_DATA, + __TCA_EM_IPT_MAX +}; + +#define TCA_EM_IPT_MAX (__TCA_EM_IPT_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_ematch/tc_em_meta.h b/include/uapi/linux/tc_ematch/tc_em_meta.h new file mode 100644 index 0000000..cf30b5b --- /dev/null +++ b/include/uapi/linux/tc_ematch/tc_em_meta.h @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_EM_META_H +#define __LINUX_TC_EM_META_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +enum { + TCA_EM_META_UNSPEC, + TCA_EM_META_HDR, + TCA_EM_META_LVALUE, + TCA_EM_META_RVALUE, + __TCA_EM_META_MAX +}; +#define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1) + +struct tcf_meta_val { + __u16 kind; + __u8 shift; + __u8 op; +}; + +#define TCF_META_TYPE_MASK (0xf << 12) +#define TCF_META_TYPE(kind) (((kind) & TCF_META_TYPE_MASK) >> 12) +#define TCF_META_ID_MASK 0x7ff +#define TCF_META_ID(kind) ((kind) & TCF_META_ID_MASK) + +enum { + TCF_META_TYPE_VAR, + TCF_META_TYPE_INT, + __TCF_META_TYPE_MAX +}; +#define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1) + +enum { + TCF_META_ID_VALUE, + TCF_META_ID_RANDOM, + TCF_META_ID_LOADAVG_0, + TCF_META_ID_LOADAVG_1, + TCF_META_ID_LOADAVG_2, + TCF_META_ID_DEV, + TCF_META_ID_PRIORITY, + TCF_META_ID_PROTOCOL, + TCF_META_ID_PKTTYPE, + TCF_META_ID_PKTLEN, + TCF_META_ID_DATALEN, + TCF_META_ID_MACLEN, + TCF_META_ID_NFMARK, + TCF_META_ID_TCINDEX, + TCF_META_ID_RTCLASSID, + TCF_META_ID_RTIIF, + TCF_META_ID_SK_FAMILY, + TCF_META_ID_SK_STATE, + TCF_META_ID_SK_REUSE, + TCF_META_ID_SK_BOUND_IF, + TCF_META_ID_SK_REFCNT, + TCF_META_ID_SK_SHUTDOWN, + TCF_META_ID_SK_PROTO, + TCF_META_ID_SK_TYPE, + TCF_META_ID_SK_RCVBUF, + TCF_META_ID_SK_RMEM_ALLOC, + TCF_META_ID_SK_WMEM_ALLOC, + TCF_META_ID_SK_OMEM_ALLOC, + TCF_META_ID_SK_WMEM_QUEUED, + TCF_META_ID_SK_RCV_QLEN, + TCF_META_ID_SK_SND_QLEN, + TCF_META_ID_SK_ERR_QLEN, + TCF_META_ID_SK_FORWARD_ALLOCS, + TCF_META_ID_SK_SNDBUF, + TCF_META_ID_SK_ALLOCS, + __TCF_META_ID_SK_ROUTE_CAPS, /* unimplemented but in ABI already */ + TCF_META_ID_SK_HASH, + TCF_META_ID_SK_LINGERTIME, + TCF_META_ID_SK_ACK_BACKLOG, + TCF_META_ID_SK_MAX_ACK_BACKLOG, + TCF_META_ID_SK_PRIO, + TCF_META_ID_SK_RCVLOWAT, + TCF_META_ID_SK_RCVTIMEO, + TCF_META_ID_SK_SNDTIMEO, + TCF_META_ID_SK_SENDMSG_OFF, + TCF_META_ID_SK_WRITE_PENDING, + TCF_META_ID_VLAN_TAG, + TCF_META_ID_RXHASH, + __TCF_META_ID_MAX +}; +#define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1) + +struct tcf_meta_hdr { + struct tcf_meta_val left; + struct tcf_meta_val right; +}; + +#endif diff --git a/include/uapi/linux/tc_ematch/tc_em_nbyte.h b/include/uapi/linux/tc_ematch/tc_em_nbyte.h new file mode 100644 index 0000000..c76333f --- /dev/null +++ b/include/uapi/linux/tc_ematch/tc_em_nbyte.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_EM_NBYTE_H +#define __LINUX_TC_EM_NBYTE_H + +#include <linux/types.h> +#include <linux/pkt_cls.h> + +struct tcf_em_nbyte { + __u16 off; + __u16 len:12; + __u8 layer:4; +}; + +#endif diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h new file mode 100644 index 0000000..a1b9fb3 --- /dev/null +++ b/include/uapi/linux/tcp.h @@ -0,0 +1,486 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the TCP protocol. + * + * Version: @(#)tcp.h 1.0.2 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_TCP_H +#define _LINUX_TCP_H + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/socket.h> + +struct tcphdr { + __be16 source; + __be16 dest; + __be32 seq; + __be32 ack_seq; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 res1:4, + doff:4, + fin:1, + syn:1, + rst:1, + psh:1, + ack:1, + urg:1, + ece:1, + cwr:1; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u16 doff:4, + res1:4, + cwr:1, + ece:1, + urg:1, + ack:1, + psh:1, + rst:1, + syn:1, + fin:1; +#else +#error "Adjust your <asm/byteorder.h> defines" +#endif + __be16 window; + __sum16 check; + __be16 urg_ptr; +}; + +/* + * The union cast uses a gcc extension to avoid aliasing problems + * (union is compatible to any of its members) + * This means this part of the code is -fstrict-aliasing safe now. + */ +union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +}; + +#define tcp_flag_word(tp) (((union tcp_word_hdr *)(tp))->words[3]) + +enum { + TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), + TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), + TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), + TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000), + TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000), + TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000), + TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000), + TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), + TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), + TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) +}; + +/* + * TCP general constants + */ +#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */ +#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */ + +/* TCP socket options */ +#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */ +#define TCP_MAXSEG 2 /* Limit MSS */ +#define TCP_CORK 3 /* Never send partially complete segments */ +#define TCP_KEEPIDLE 4 /* Start keeplives after this period */ +#define TCP_KEEPINTVL 5 /* Interval between keepalives */ +#define TCP_KEEPCNT 6 /* Number of keepalives before death */ +#define TCP_SYNCNT 7 /* Number of SYN retransmits */ +#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */ +#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */ +#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */ +#define TCP_INFO 11 /* Information about this connection. */ +#define TCP_QUICKACK 12 /* Block/reenable quick acks */ +#define TCP_CONGESTION 13 /* Congestion control algorithm */ +#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ +#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ +#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ +#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ +#define TCP_REPAIR 19 /* TCP sock is under repair right now */ +#define TCP_REPAIR_QUEUE 20 +#define TCP_QUEUE_SEQ 21 +#define TCP_REPAIR_OPTIONS 22 +#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ +#define TCP_TIMESTAMP 24 +#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ +#define TCP_CC_INFO 26 /* Get Congestion Control (optional) info */ +#define TCP_SAVE_SYN 27 /* Record SYN headers for new connections */ +#define TCP_SAVED_SYN 28 /* Get SYN headers recorded for connection */ +#define TCP_REPAIR_WINDOW 29 /* Get/set window parameters */ +#define TCP_FASTOPEN_CONNECT 30 /* Attempt FastOpen with connect */ +#define TCP_ULP 31 /* Attach a ULP to a TCP connection */ +#define TCP_MD5SIG_EXT 32 /* TCP MD5 Signature with extensions */ +#define TCP_FASTOPEN_KEY 33 /* Set the key for Fast Open (cookie) */ +#define TCP_FASTOPEN_NO_COOKIE 34 /* Enable TFO without a TFO cookie */ +#define TCP_ZEROCOPY_RECEIVE 35 +#define TCP_INQ 36 /* Notify bytes available to read as a cmsg on read */ + +#define TCP_CM_INQ TCP_INQ + +#define TCP_TX_DELAY 37 /* delay outgoing packets by XX usec */ + +#define TCP_AO_ADD_KEY 38 /* Add/Set MKT */ +#define TCP_AO_DEL_KEY 39 /* Delete MKT */ +#define TCP_AO_INFO 40 /* Set/list TCP-AO per-socket options */ +#define TCP_AO_GET_KEYS 41 /* List MKT(s) */ +#define TCP_AO_REPAIR 42 /* Get/Set SNEs and ISNs */ + +#define TCP_REPAIR_ON 1 +#define TCP_REPAIR_OFF 0 +#define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ + +struct tcp_repair_opt { + __u32 opt_code; + __u32 opt_val; +}; + +struct tcp_repair_window { + __u32 snd_wl1; + __u32 snd_wnd; + __u32 max_window; + + __u32 rcv_wnd; + __u32 rcv_wup; +}; + +enum { + TCP_NO_QUEUE, + TCP_RECV_QUEUE, + TCP_SEND_QUEUE, + TCP_QUEUES_NR, +}; + +/* why fastopen failed from client perspective */ +enum tcp_fastopen_client_fail { + TFO_STATUS_UNSPEC, /* catch-all */ + TFO_COOKIE_UNAVAILABLE, /* if not in TFO_CLIENT_NO_COOKIE mode */ + TFO_DATA_NOT_ACKED, /* SYN-ACK did not ack SYN data */ + TFO_SYN_RETRANSMITTED, /* SYN-ACK did not ack SYN data after timeout */ +}; + +/* for TCP_INFO socket option */ +#define TCPI_OPT_TIMESTAMPS 1 +#define TCPI_OPT_SACK 2 +#define TCPI_OPT_WSCALE 4 +#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ +#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ +#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ +#define TCPI_OPT_USEC_TS 64 /* usec timestamps */ + +/* + * Sender's congestion state indicating normal or abnormal situations + * in the last round of packets sent. The state is driven by the ACK + * information and timer events. + */ +enum tcp_ca_state { + /* + * Nothing bad has been observed recently. + * No apparent reordering, packet loss, or ECN marks. + */ + TCP_CA_Open = 0, +#define TCPF_CA_Open (1<<TCP_CA_Open) + /* + * The sender enters disordered state when it has received DUPACKs or + * SACKs in the last round of packets sent. This could be due to packet + * loss or reordering but needs further information to confirm packets + * have been lost. + */ + TCP_CA_Disorder = 1, +#define TCPF_CA_Disorder (1<<TCP_CA_Disorder) + /* + * The sender enters Congestion Window Reduction (CWR) state when it + * has received ACKs with ECN-ECE marks, or has experienced congestion + * or packet discard on the sender host (e.g. qdisc). + */ + TCP_CA_CWR = 2, +#define TCPF_CA_CWR (1<<TCP_CA_CWR) + /* + * The sender is in fast recovery and retransmitting lost packets, + * typically triggered by ACK events. + */ + TCP_CA_Recovery = 3, +#define TCPF_CA_Recovery (1<<TCP_CA_Recovery) + /* + * The sender is in loss recovery triggered by retransmission timeout. + */ + TCP_CA_Loss = 4 +#define TCPF_CA_Loss (1<<TCP_CA_Loss) +}; + +struct tcp_info { + __u8 tcpi_state; + __u8 tcpi_ca_state; + __u8 tcpi_retransmits; + __u8 tcpi_probes; + __u8 tcpi_backoff; + __u8 tcpi_options; + __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4; + __u8 tcpi_delivery_rate_app_limited:1, tcpi_fastopen_client_fail:2; + + __u32 tcpi_rto; + __u32 tcpi_ato; + __u32 tcpi_snd_mss; + __u32 tcpi_rcv_mss; + + __u32 tcpi_unacked; + __u32 tcpi_sacked; + __u32 tcpi_lost; + __u32 tcpi_retrans; + __u32 tcpi_fackets; + + /* Times. */ + __u32 tcpi_last_data_sent; + __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */ + __u32 tcpi_last_data_recv; + __u32 tcpi_last_ack_recv; + + /* Metrics. */ + __u32 tcpi_pmtu; + __u32 tcpi_rcv_ssthresh; + __u32 tcpi_rtt; + __u32 tcpi_rttvar; + __u32 tcpi_snd_ssthresh; + __u32 tcpi_snd_cwnd; + __u32 tcpi_advmss; + __u32 tcpi_reordering; + + __u32 tcpi_rcv_rtt; + __u32 tcpi_rcv_space; + + __u32 tcpi_total_retrans; + + __u64 tcpi_pacing_rate; + __u64 tcpi_max_pacing_rate; + __u64 tcpi_bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked */ + __u64 tcpi_bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived */ + __u32 tcpi_segs_out; /* RFC4898 tcpEStatsPerfSegsOut */ + __u32 tcpi_segs_in; /* RFC4898 tcpEStatsPerfSegsIn */ + + __u32 tcpi_notsent_bytes; + __u32 tcpi_min_rtt; + __u32 tcpi_data_segs_in; /* RFC4898 tcpEStatsDataSegsIn */ + __u32 tcpi_data_segs_out; /* RFC4898 tcpEStatsDataSegsOut */ + + __u64 tcpi_delivery_rate; + + __u64 tcpi_busy_time; /* Time (usec) busy sending data */ + __u64 tcpi_rwnd_limited; /* Time (usec) limited by receive window */ + __u64 tcpi_sndbuf_limited; /* Time (usec) limited by send buffer */ + + __u32 tcpi_delivered; + __u32 tcpi_delivered_ce; + + __u64 tcpi_bytes_sent; /* RFC4898 tcpEStatsPerfHCDataOctetsOut */ + __u64 tcpi_bytes_retrans; /* RFC4898 tcpEStatsPerfOctetsRetrans */ + __u32 tcpi_dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups */ + __u32 tcpi_reord_seen; /* reordering events seen */ + + __u32 tcpi_rcv_ooopack; /* Out-of-order packets received */ + + __u32 tcpi_snd_wnd; /* peer's advertised receive window after + * scaling (bytes) + */ + __u32 tcpi_rcv_wnd; /* local advertised receive window after + * scaling (bytes) + */ + + __u32 tcpi_rehash; /* PLB or timeout triggered rehash attempts */ + + __u16 tcpi_total_rto; /* Total number of RTO timeouts, including + * SYN/SYN-ACK and recurring timeouts. + */ + __u16 tcpi_total_rto_recoveries; /* Total number of RTO + * recoveries, including any + * unfinished recovery. + */ + __u32 tcpi_total_rto_time; /* Total time spent in RTO recoveries + * in milliseconds, including any + * unfinished recovery. + */ +}; + +/* netlink attributes types for SCM_TIMESTAMPING_OPT_STATS */ +enum { + TCP_NLA_PAD, + TCP_NLA_BUSY, /* Time (usec) busy sending data */ + TCP_NLA_RWND_LIMITED, /* Time (usec) limited by receive window */ + TCP_NLA_SNDBUF_LIMITED, /* Time (usec) limited by send buffer */ + TCP_NLA_DATA_SEGS_OUT, /* Data pkts sent including retransmission */ + TCP_NLA_TOTAL_RETRANS, /* Data pkts retransmitted */ + TCP_NLA_PACING_RATE, /* Pacing rate in bytes per second */ + TCP_NLA_DELIVERY_RATE, /* Delivery rate in bytes per second */ + TCP_NLA_SND_CWND, /* Sending congestion window */ + TCP_NLA_REORDERING, /* Reordering metric */ + TCP_NLA_MIN_RTT, /* minimum RTT */ + TCP_NLA_RECUR_RETRANS, /* Recurring retransmits for the current pkt */ + TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ + TCP_NLA_SNDQ_SIZE, /* Data (bytes) pending in send queue */ + TCP_NLA_CA_STATE, /* ca_state of socket */ + TCP_NLA_SND_SSTHRESH, /* Slow start size threshold */ + TCP_NLA_DELIVERED, /* Data pkts delivered incl. out-of-order */ + TCP_NLA_DELIVERED_CE, /* Like above but only ones w/ CE marks */ + TCP_NLA_BYTES_SENT, /* Data bytes sent including retransmission */ + TCP_NLA_BYTES_RETRANS, /* Data bytes retransmitted */ + TCP_NLA_DSACK_DUPS, /* DSACK blocks received */ + TCP_NLA_REORD_SEEN, /* reordering events seen */ + TCP_NLA_SRTT, /* smoothed RTT in usecs */ + TCP_NLA_TIMEOUT_REHASH, /* Timeout-triggered rehash attempts */ + TCP_NLA_BYTES_NOTSENT, /* Bytes in write queue not yet sent */ + TCP_NLA_EDT, /* Earliest departure time (CLOCK_MONOTONIC) */ + TCP_NLA_TTL, /* TTL or hop limit of a packet received */ + TCP_NLA_REHASH, /* PLB and timeout triggered rehash attempts */ +}; + +/* for TCP_MD5SIG socket option */ +#define TCP_MD5SIG_MAXKEYLEN 80 + +/* tcp_md5sig extension flags for TCP_MD5SIG_EXT */ +#define TCP_MD5SIG_FLAG_PREFIX 0x1 /* address prefix length */ +#define TCP_MD5SIG_FLAG_IFINDEX 0x2 /* ifindex set */ + +struct tcp_md5sig { + struct __kernel_sockaddr_storage tcpm_addr; /* address associated */ + __u8 tcpm_flags; /* extension flags */ + __u8 tcpm_prefixlen; /* address prefix */ + __u16 tcpm_keylen; /* key length */ + int tcpm_ifindex; /* device index for scope */ + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ +}; + +/* INET_DIAG_MD5SIG */ +struct tcp_diag_md5sig { + __u8 tcpm_family; + __u8 tcpm_prefixlen; + __u16 tcpm_keylen; + __be32 tcpm_addr[4]; + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; +}; + +#define TCP_AO_MAXKEYLEN 80 + +#define TCP_AO_KEYF_IFINDEX (1 << 0) /* L3 ifindex for VRF */ +#define TCP_AO_KEYF_EXCLUDE_OPT (1 << 1) /* "Indicates whether TCP + * options other than TCP-AO + * are included in the MAC + * calculation" + */ + +struct tcp_ao_add { /* setsockopt(TCP_AO_ADD_KEY) */ + struct __kernel_sockaddr_storage addr; /* peer's address for the key */ + char alg_name[64]; /* crypto hash algorithm to use */ + __s32 ifindex; /* L3 dev index for VRF */ + __u32 set_current :1, /* set key as Current_key at once */ + set_rnext :1, /* request it from peer with RNext_key */ + reserved :30; /* must be 0 */ + __u16 reserved2; /* padding, must be 0 */ + __u8 prefix; /* peer's address prefix */ + __u8 sndid; /* SendID for outgoing segments */ + __u8 rcvid; /* RecvID to match for incoming seg */ + __u8 maclen; /* length of authentication code (hash) */ + __u8 keyflags; /* see TCP_AO_KEYF_ */ + __u8 keylen; /* length of ::key */ + __u8 key[TCP_AO_MAXKEYLEN]; +} __attribute__((aligned(8))); + +struct tcp_ao_del { /* setsockopt(TCP_AO_DEL_KEY) */ + struct __kernel_sockaddr_storage addr; /* peer's address for the key */ + __s32 ifindex; /* L3 dev index for VRF */ + __u32 set_current :1, /* corresponding ::current_key */ + set_rnext :1, /* corresponding ::rnext */ + del_async :1, /* only valid for listen sockets */ + reserved :29; /* must be 0 */ + __u16 reserved2; /* padding, must be 0 */ + __u8 prefix; /* peer's address prefix */ + __u8 sndid; /* SendID for outgoing segments */ + __u8 rcvid; /* RecvID to match for incoming seg */ + __u8 current_key; /* KeyID to set as Current_key */ + __u8 rnext; /* KeyID to set as Rnext_key */ + __u8 keyflags; /* see TCP_AO_KEYF_ */ +} __attribute__((aligned(8))); + +struct tcp_ao_info_opt { /* setsockopt(TCP_AO_INFO), getsockopt(TCP_AO_INFO) */ + /* Here 'in' is for setsockopt(), 'out' is for getsockopt() */ + __u32 set_current :1, /* in/out: corresponding ::current_key */ + set_rnext :1, /* in/out: corresponding ::rnext */ + ao_required :1, /* in/out: don't accept non-AO connects */ + set_counters :1, /* in: set/clear ::pkt_* counters */ + accept_icmps :1, /* in/out: accept incoming ICMPs */ + reserved :27; /* must be 0 */ + __u16 reserved2; /* padding, must be 0 */ + __u8 current_key; /* in/out: KeyID of Current_key */ + __u8 rnext; /* in/out: keyid of RNext_key */ + __u64 pkt_good; /* in/out: verified segments */ + __u64 pkt_bad; /* in/out: failed verification */ + __u64 pkt_key_not_found; /* in/out: could not find a key to verify */ + __u64 pkt_ao_required; /* in/out: segments missing TCP-AO sign */ + __u64 pkt_dropped_icmp; /* in/out: ICMPs that were ignored */ +} __attribute__((aligned(8))); + +struct tcp_ao_getsockopt { /* getsockopt(TCP_AO_GET_KEYS) */ + struct __kernel_sockaddr_storage addr; /* in/out: dump keys for peer + * with this address/prefix + */ + char alg_name[64]; /* out: crypto hash algorithm */ + __u8 key[TCP_AO_MAXKEYLEN]; + __u32 nkeys; /* in: size of the userspace buffer + * @optval, measured in @optlen - the + * sizeof(struct tcp_ao_getsockopt) + * out: number of keys that matched + */ + __u16 is_current :1, /* in: match and dump Current_key, + * out: the dumped key is Current_key + */ + + is_rnext :1, /* in: match and dump RNext_key, + * out: the dumped key is RNext_key + */ + get_all :1, /* in: dump all keys */ + reserved :13; /* padding, must be 0 */ + __u8 sndid; /* in/out: dump keys with SendID */ + __u8 rcvid; /* in/out: dump keys with RecvID */ + __u8 prefix; /* in/out: dump keys with address/prefix */ + __u8 maclen; /* out: key's length of authentication + * code (hash) + */ + __u8 keyflags; /* in/out: see TCP_AO_KEYF_ */ + __u8 keylen; /* out: length of ::key */ + __s32 ifindex; /* in/out: L3 dev index for VRF */ + __u64 pkt_good; /* out: verified segments */ + __u64 pkt_bad; /* out: segments that failed verification */ +} __attribute__((aligned(8))); + +struct tcp_ao_repair { /* {s,g}etsockopt(TCP_AO_REPAIR) */ + __be32 snt_isn; + __be32 rcv_isn; + __u32 snd_sne; + __u32 rcv_sne; +} __attribute__((aligned(8))); + +/* setsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) */ + +#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1 +struct tcp_zerocopy_receive { + __u64 address; /* in: address of mapping */ + __u32 length; /* in/out: number of bytes to map/mapped */ + __u32 recv_skip_hint; /* out: amount of bytes to skip */ + __u32 inq; /* out: amount of bytes in read queue */ + __s32 err; /* out: socket error */ + __u64 copybuf_address; /* in: copybuf address (small reads) */ + __s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */ + __u32 flags; /* in: flags */ + __u64 msg_control; /* ancillary data */ + __u64 msg_controllen; + __u32 msg_flags; + __u32 reserved; /* set to 0 for now */ +}; +#endif /* _LINUX_TCP_H */ diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h new file mode 100644 index 0000000..7cb4a17 --- /dev/null +++ b/include/uapi/linux/tcp_metrics.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* tcp_metrics.h - TCP Metrics Interface */ + +#ifndef _LINUX_TCP_METRICS_H +#define _LINUX_TCP_METRICS_H + +#include <linux/types.h> + +/* NETLINK_GENERIC related info + */ +#define TCP_METRICS_GENL_NAME "tcp_metrics" +#define TCP_METRICS_GENL_VERSION 0x1 + +enum tcp_metric_index { + TCP_METRIC_RTT, /* in ms units */ + TCP_METRIC_RTTVAR, /* in ms units */ + TCP_METRIC_SSTHRESH, + TCP_METRIC_CWND, + TCP_METRIC_REORDERING, + + TCP_METRIC_RTT_US, /* in usec units */ + TCP_METRIC_RTTVAR_US, /* in usec units */ + + /* Always last. */ + __TCP_METRIC_MAX, +}; + +#define TCP_METRIC_MAX (__TCP_METRIC_MAX - 1) + +enum { + TCP_METRICS_ATTR_UNSPEC, + TCP_METRICS_ATTR_ADDR_IPV4, /* u32 */ + TCP_METRICS_ATTR_ADDR_IPV6, /* binary */ + TCP_METRICS_ATTR_AGE, /* msecs */ + TCP_METRICS_ATTR_TW_TSVAL, /* u32, raw, rcv tsval */ + TCP_METRICS_ATTR_TW_TS_STAMP, /* s32, sec age */ + TCP_METRICS_ATTR_VALS, /* nested +1, u32 */ + TCP_METRICS_ATTR_FOPEN_MSS, /* u16 */ + TCP_METRICS_ATTR_FOPEN_SYN_DROPS, /* u16, count of drops */ + TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS, /* msecs age */ + TCP_METRICS_ATTR_FOPEN_COOKIE, /* binary */ + TCP_METRICS_ATTR_SADDR_IPV4, /* u32 */ + TCP_METRICS_ATTR_SADDR_IPV6, /* binary */ + TCP_METRICS_ATTR_PAD, + + __TCP_METRICS_ATTR_MAX, +}; + +#define TCP_METRICS_ATTR_MAX (__TCP_METRICS_ATTR_MAX - 1) + +enum { + TCP_METRICS_CMD_UNSPEC, + TCP_METRICS_CMD_GET, + TCP_METRICS_CMD_DEL, + + __TCP_METRICS_CMD_MAX, +}; + +#define TCP_METRICS_CMD_MAX (__TCP_METRICS_CMD_MAX - 1) + +#endif /* _LINUX_TCP_METRICS_H */ diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h new file mode 100644 index 0000000..f08cc36 --- /dev/null +++ b/include/uapi/linux/tipc.h @@ -0,0 +1,315 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * include/uapi/linux/tipc.h: Header for TIPC socket interface + * + * Copyright (c) 2003-2006, 2015-2016 Ericsson AB + * Copyright (c) 2005, 2010-2011, Wind River Systems + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _LINUX_TIPC_H_ +#define _LINUX_TIPC_H_ + +#include <linux/types.h> +#include <linux/sockios.h> + +/* + * TIPC addressing primitives + */ + +struct tipc_socket_addr { + __u32 ref; + __u32 node; +}; + +struct tipc_service_addr { + __u32 type; + __u32 instance; +}; + +struct tipc_service_range { + __u32 type; + __u32 lower; + __u32 upper; +}; + +/* + * Application-accessible service types + */ + +#define TIPC_NODE_STATE 0 /* node state service type */ +#define TIPC_TOP_SRV 1 /* topology server service type */ +#define TIPC_LINK_STATE 2 /* link state service type */ +#define TIPC_RESERVED_TYPES 64 /* lowest user-allowed service type */ + +/* + * Publication scopes when binding service / service range + */ +enum tipc_scope { + TIPC_CLUSTER_SCOPE = 2, /* 0 can also be used */ + TIPC_NODE_SCOPE = 3 +}; + +/* + * Limiting values for messages + */ + +#define TIPC_MAX_USER_MSG_SIZE 66000U + +/* + * Message importance levels + */ + +#define TIPC_LOW_IMPORTANCE 0 +#define TIPC_MEDIUM_IMPORTANCE 1 +#define TIPC_HIGH_IMPORTANCE 2 +#define TIPC_CRITICAL_IMPORTANCE 3 + +/* + * Msg rejection/connection shutdown reasons + */ + +#define TIPC_OK 0 +#define TIPC_ERR_NO_NAME 1 +#define TIPC_ERR_NO_PORT 2 +#define TIPC_ERR_NO_NODE 3 +#define TIPC_ERR_OVERLOAD 4 +#define TIPC_CONN_SHUTDOWN 5 + +/* + * TIPC topology subscription service definitions + */ + +#define TIPC_SUB_PORTS 0x01 /* filter: evt at each match */ +#define TIPC_SUB_SERVICE 0x02 /* filter: evt at first up/last down */ +#define TIPC_SUB_CANCEL 0x04 /* filter: cancel a subscription */ + +#define TIPC_WAIT_FOREVER (~0) /* timeout for permanent subscription */ + +struct tipc_subscr { + struct tipc_service_range seq; /* range of interest */ + __u32 timeout; /* subscription duration (in ms) */ + __u32 filter; /* bitmask of filter options */ + char usr_handle[8]; /* available for subscriber use */ +}; + +#define TIPC_PUBLISHED 1 /* publication event */ +#define TIPC_WITHDRAWN 2 /* withdrawal event */ +#define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */ + +struct tipc_event { + __u32 event; /* event type */ + __u32 found_lower; /* matching range */ + __u32 found_upper; /* " " */ + struct tipc_socket_addr port; /* associated socket */ + struct tipc_subscr s; /* associated subscription */ +}; + +/* + * Socket API + */ + +#ifndef AF_TIPC +#define AF_TIPC 30 +#endif + +#ifndef PF_TIPC +#define PF_TIPC AF_TIPC +#endif + +#ifndef SOL_TIPC +#define SOL_TIPC 271 +#endif + +#define TIPC_ADDR_MCAST 1 +#define TIPC_SERVICE_RANGE 1 +#define TIPC_SERVICE_ADDR 2 +#define TIPC_SOCKET_ADDR 3 + +struct sockaddr_tipc { + unsigned short family; + unsigned char addrtype; + signed char scope; + union { + struct tipc_socket_addr id; + struct tipc_service_range nameseq; + struct { + struct tipc_service_addr name; + __u32 domain; + } name; + } addr; +}; + +/* + * Ancillary data objects supported by recvmsg() + */ + +#define TIPC_ERRINFO 1 /* error info */ +#define TIPC_RETDATA 2 /* returned data */ +#define TIPC_DESTNAME 3 /* destination name */ + +/* + * TIPC-specific socket option names + */ + +#define TIPC_IMPORTANCE 127 /* Default: TIPC_LOW_IMPORTANCE */ +#define TIPC_SRC_DROPPABLE 128 /* Default: based on socket type */ +#define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */ +#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */ +#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ +#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ +#define TIPC_MCAST_BROADCAST 133 /* Default: TIPC selects. No arg */ +#define TIPC_MCAST_REPLICAST 134 /* Default: TIPC selects. No arg */ +#define TIPC_GROUP_JOIN 135 /* Takes struct tipc_group_req* */ +#define TIPC_GROUP_LEAVE 136 /* No argument */ +#define TIPC_SOCK_RECVQ_USED 137 /* Default: none (read only) */ +#define TIPC_NODELAY 138 /* Default: false */ + +/* + * Flag values + */ +#define TIPC_GROUP_LOOPBACK 0x1 /* Receive copy of sent msg when match */ +#define TIPC_GROUP_MEMBER_EVTS 0x2 /* Receive membership events in socket */ + +struct tipc_group_req { + __u32 type; /* group id */ + __u32 instance; /* member id */ + __u32 scope; /* cluster/node */ + __u32 flags; +}; + +/* + * Maximum sizes of TIPC bearer-related names (including terminating NULL) + * The string formatting for each name element is: + * media: media + * interface: media:interface name + * link: node:interface-node:interface + */ +#define TIPC_NODEID_LEN 16 +#define TIPC_MAX_MEDIA_NAME 16 +#define TIPC_MAX_IF_NAME 16 +#define TIPC_MAX_BEARER_NAME 32 +#define TIPC_MAX_LINK_NAME 68 + +#define SIOCGETLINKNAME SIOCPROTOPRIVATE +#define SIOCGETNODEID (SIOCPROTOPRIVATE + 1) + +struct tipc_sioc_ln_req { + __u32 peer; + __u32 bearer_id; + char linkname[TIPC_MAX_LINK_NAME]; +}; + +struct tipc_sioc_nodeid_req { + __u32 peer; + char node_id[TIPC_NODEID_LEN]; +}; + +/* + * TIPC Crypto, AEAD + */ +#define TIPC_AEAD_ALG_NAME (32) + +struct tipc_aead_key { + char alg_name[TIPC_AEAD_ALG_NAME]; + unsigned int keylen; /* in bytes */ + char key[]; +}; + +#define TIPC_AEAD_KEYLEN_MIN (16 + 4) +#define TIPC_AEAD_KEYLEN_MAX (32 + 4) +#define TIPC_AEAD_KEY_SIZE_MAX (sizeof(struct tipc_aead_key) + \ + TIPC_AEAD_KEYLEN_MAX) + +static __inline__ int tipc_aead_key_size(struct tipc_aead_key *key) +{ + return sizeof(*key) + key->keylen; +} + +#define TIPC_REKEYING_NOW (~0U) + +/* The macros and functions below are deprecated: + */ + +#define TIPC_CFG_SRV 0 +#define TIPC_ZONE_SCOPE 1 + +#define TIPC_ADDR_NAMESEQ 1 +#define TIPC_ADDR_NAME 2 +#define TIPC_ADDR_ID 3 + +#define TIPC_NODE_BITS 12 +#define TIPC_CLUSTER_BITS 12 +#define TIPC_ZONE_BITS 8 + +#define TIPC_NODE_OFFSET 0 +#define TIPC_CLUSTER_OFFSET TIPC_NODE_BITS +#define TIPC_ZONE_OFFSET (TIPC_CLUSTER_OFFSET + TIPC_CLUSTER_BITS) + +#define TIPC_NODE_SIZE ((1UL << TIPC_NODE_BITS) - 1) +#define TIPC_CLUSTER_SIZE ((1UL << TIPC_CLUSTER_BITS) - 1) +#define TIPC_ZONE_SIZE ((1UL << TIPC_ZONE_BITS) - 1) + +#define TIPC_NODE_MASK (TIPC_NODE_SIZE << TIPC_NODE_OFFSET) +#define TIPC_CLUSTER_MASK (TIPC_CLUSTER_SIZE << TIPC_CLUSTER_OFFSET) +#define TIPC_ZONE_MASK (TIPC_ZONE_SIZE << TIPC_ZONE_OFFSET) + +#define TIPC_ZONE_CLUSTER_MASK (TIPC_ZONE_MASK | TIPC_CLUSTER_MASK) + +#define tipc_portid tipc_socket_addr +#define tipc_name tipc_service_addr +#define tipc_name_seq tipc_service_range + +static __inline__ __u32 tipc_addr(unsigned int zone, + unsigned int cluster, + unsigned int node) +{ + return (zone << TIPC_ZONE_OFFSET) | + (cluster << TIPC_CLUSTER_OFFSET) | + node; +} + +static __inline__ unsigned int tipc_zone(__u32 addr) +{ + return addr >> TIPC_ZONE_OFFSET; +} + +static __inline__ unsigned int tipc_cluster(__u32 addr) +{ + return (addr & TIPC_CLUSTER_MASK) >> TIPC_CLUSTER_OFFSET; +} + +static __inline__ unsigned int tipc_node(__u32 addr) +{ + return addr & TIPC_NODE_MASK; +} + +#endif diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h new file mode 100644 index 0000000..d847dd6 --- /dev/null +++ b/include/uapi/linux/tipc_netlink.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (c) 2014, Ericsson AB + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _LINUX_TIPC_NETLINK_H_ +#define _LINUX_TIPC_NETLINK_H_ + +#define TIPC_GENL_V2_NAME "TIPCv2" +#define TIPC_GENL_V2_VERSION 0x1 + +/* Netlink commands */ +enum { + TIPC_NL_UNSPEC, + TIPC_NL_LEGACY, + TIPC_NL_BEARER_DISABLE, + TIPC_NL_BEARER_ENABLE, + TIPC_NL_BEARER_GET, + TIPC_NL_BEARER_SET, + TIPC_NL_SOCK_GET, + TIPC_NL_PUBL_GET, + TIPC_NL_LINK_GET, + TIPC_NL_LINK_SET, + TIPC_NL_LINK_RESET_STATS, + TIPC_NL_MEDIA_GET, + TIPC_NL_MEDIA_SET, + TIPC_NL_NODE_GET, + TIPC_NL_NET_GET, + TIPC_NL_NET_SET, + TIPC_NL_NAME_TABLE_GET, + TIPC_NL_MON_SET, + TIPC_NL_MON_GET, + TIPC_NL_MON_PEER_GET, + TIPC_NL_PEER_REMOVE, + TIPC_NL_BEARER_ADD, + TIPC_NL_UDP_GET_REMOTEIP, + TIPC_NL_KEY_SET, + TIPC_NL_KEY_FLUSH, + TIPC_NL_ADDR_LEGACY_GET, + + __TIPC_NL_CMD_MAX, + TIPC_NL_CMD_MAX = __TIPC_NL_CMD_MAX - 1 +}; + +/* Top level netlink attributes */ +enum { + TIPC_NLA_UNSPEC, + TIPC_NLA_BEARER, /* nest */ + TIPC_NLA_SOCK, /* nest */ + TIPC_NLA_PUBL, /* nest */ + TIPC_NLA_LINK, /* nest */ + TIPC_NLA_MEDIA, /* nest */ + TIPC_NLA_NODE, /* nest */ + TIPC_NLA_NET, /* nest */ + TIPC_NLA_NAME_TABLE, /* nest */ + TIPC_NLA_MON, /* nest */ + TIPC_NLA_MON_PEER, /* nest */ + + __TIPC_NLA_MAX, + TIPC_NLA_MAX = __TIPC_NLA_MAX - 1 +}; + +/* Bearer info */ +enum { + TIPC_NLA_BEARER_UNSPEC, + TIPC_NLA_BEARER_NAME, /* string */ + TIPC_NLA_BEARER_PROP, /* nest */ + TIPC_NLA_BEARER_DOMAIN, /* u32 */ + TIPC_NLA_BEARER_UDP_OPTS, /* nest */ + + __TIPC_NLA_BEARER_MAX, + TIPC_NLA_BEARER_MAX = __TIPC_NLA_BEARER_MAX - 1 +}; + +enum { + TIPC_NLA_UDP_UNSPEC, + TIPC_NLA_UDP_LOCAL, /* sockaddr_storage */ + TIPC_NLA_UDP_REMOTE, /* sockaddr_storage */ + TIPC_NLA_UDP_MULTI_REMOTEIP, /* flag */ + + __TIPC_NLA_UDP_MAX, + TIPC_NLA_UDP_MAX = __TIPC_NLA_UDP_MAX - 1 +}; +/* Socket info */ +enum { + TIPC_NLA_SOCK_UNSPEC, + TIPC_NLA_SOCK_ADDR, /* u32 */ + TIPC_NLA_SOCK_REF, /* u32 */ + TIPC_NLA_SOCK_CON, /* nest */ + TIPC_NLA_SOCK_HAS_PUBL, /* flag */ + TIPC_NLA_SOCK_STAT, /* nest */ + TIPC_NLA_SOCK_TYPE, /* u32 */ + TIPC_NLA_SOCK_INO, /* u32 */ + TIPC_NLA_SOCK_UID, /* u32 */ + TIPC_NLA_SOCK_TIPC_STATE, /* u32 */ + TIPC_NLA_SOCK_COOKIE, /* u64 */ + TIPC_NLA_SOCK_PAD, /* flag */ + TIPC_NLA_SOCK_GROUP, /* nest */ + + __TIPC_NLA_SOCK_MAX, + TIPC_NLA_SOCK_MAX = __TIPC_NLA_SOCK_MAX - 1 +}; + +/* Link info */ +enum { + TIPC_NLA_LINK_UNSPEC, + TIPC_NLA_LINK_NAME, /* string */ + TIPC_NLA_LINK_DEST, /* u32 */ + TIPC_NLA_LINK_MTU, /* u32 */ + TIPC_NLA_LINK_BROADCAST, /* flag */ + TIPC_NLA_LINK_UP, /* flag */ + TIPC_NLA_LINK_ACTIVE, /* flag */ + TIPC_NLA_LINK_PROP, /* nest */ + TIPC_NLA_LINK_STATS, /* nest */ + TIPC_NLA_LINK_RX, /* u32 */ + TIPC_NLA_LINK_TX, /* u32 */ + + __TIPC_NLA_LINK_MAX, + TIPC_NLA_LINK_MAX = __TIPC_NLA_LINK_MAX - 1 +}; + +/* Media info */ +enum { + TIPC_NLA_MEDIA_UNSPEC, + TIPC_NLA_MEDIA_NAME, /* string */ + TIPC_NLA_MEDIA_PROP, /* nest */ + + __TIPC_NLA_MEDIA_MAX, + TIPC_NLA_MEDIA_MAX = __TIPC_NLA_MEDIA_MAX - 1 +}; + +/* Node info */ +enum { + TIPC_NLA_NODE_UNSPEC, + TIPC_NLA_NODE_ADDR, /* u32 */ + TIPC_NLA_NODE_UP, /* flag */ + TIPC_NLA_NODE_ID, /* data */ + TIPC_NLA_NODE_KEY, /* data */ + TIPC_NLA_NODE_KEY_MASTER, /* flag */ + TIPC_NLA_NODE_REKEYING, /* u32 */ + + __TIPC_NLA_NODE_MAX, + TIPC_NLA_NODE_MAX = __TIPC_NLA_NODE_MAX - 1 +}; + +/* Net info */ +enum { + TIPC_NLA_NET_UNSPEC, + TIPC_NLA_NET_ID, /* u32 */ + TIPC_NLA_NET_ADDR, /* u32 */ + TIPC_NLA_NET_NODEID, /* u64 */ + TIPC_NLA_NET_NODEID_W1, /* u64 */ + TIPC_NLA_NET_ADDR_LEGACY, /* flag */ + + __TIPC_NLA_NET_MAX, + TIPC_NLA_NET_MAX = __TIPC_NLA_NET_MAX - 1 +}; + +/* Name table info */ +enum { + TIPC_NLA_NAME_TABLE_UNSPEC, + TIPC_NLA_NAME_TABLE_PUBL, /* nest */ + + __TIPC_NLA_NAME_TABLE_MAX, + TIPC_NLA_NAME_TABLE_MAX = __TIPC_NLA_NAME_TABLE_MAX - 1 +}; + +/* Monitor info */ +enum { + TIPC_NLA_MON_UNSPEC, + TIPC_NLA_MON_ACTIVATION_THRESHOLD, /* u32 */ + TIPC_NLA_MON_REF, /* u32 */ + TIPC_NLA_MON_ACTIVE, /* flag */ + TIPC_NLA_MON_BEARER_NAME, /* string */ + TIPC_NLA_MON_PEERCNT, /* u32 */ + TIPC_NLA_MON_LISTGEN, /* u32 */ + + __TIPC_NLA_MON_MAX, + TIPC_NLA_MON_MAX = __TIPC_NLA_MON_MAX - 1 +}; + +/* Publication info */ +enum { + TIPC_NLA_PUBL_UNSPEC, + + TIPC_NLA_PUBL_TYPE, /* u32 */ + TIPC_NLA_PUBL_LOWER, /* u32 */ + TIPC_NLA_PUBL_UPPER, /* u32 */ + TIPC_NLA_PUBL_SCOPE, /* u32 */ + TIPC_NLA_PUBL_NODE, /* u32 */ + TIPC_NLA_PUBL_REF, /* u32 */ + TIPC_NLA_PUBL_KEY, /* u32 */ + + __TIPC_NLA_PUBL_MAX, + TIPC_NLA_PUBL_MAX = __TIPC_NLA_PUBL_MAX - 1 +}; + +/* Monitor peer info */ +enum { + TIPC_NLA_MON_PEER_UNSPEC, + + TIPC_NLA_MON_PEER_ADDR, /* u32 */ + TIPC_NLA_MON_PEER_DOMGEN, /* u32 */ + TIPC_NLA_MON_PEER_APPLIED, /* u32 */ + TIPC_NLA_MON_PEER_UPMAP, /* u64 */ + TIPC_NLA_MON_PEER_MEMBERS, /* tlv */ + TIPC_NLA_MON_PEER_UP, /* flag */ + TIPC_NLA_MON_PEER_HEAD, /* flag */ + TIPC_NLA_MON_PEER_LOCAL, /* flag */ + TIPC_NLA_MON_PEER_PAD, /* flag */ + + __TIPC_NLA_MON_PEER_MAX, + TIPC_NLA_MON_PEER_MAX = __TIPC_NLA_MON_PEER_MAX - 1 +}; + +/* Nest, socket group info */ +enum { + TIPC_NLA_SOCK_GROUP_ID, /* u32 */ + TIPC_NLA_SOCK_GROUP_OPEN, /* flag */ + TIPC_NLA_SOCK_GROUP_NODE_SCOPE, /* flag */ + TIPC_NLA_SOCK_GROUP_CLUSTER_SCOPE, /* flag */ + TIPC_NLA_SOCK_GROUP_INSTANCE, /* u32 */ + TIPC_NLA_SOCK_GROUP_BC_SEND_NEXT, /* u32 */ + + __TIPC_NLA_SOCK_GROUP_MAX, + TIPC_NLA_SOCK_GROUP_MAX = __TIPC_NLA_SOCK_GROUP_MAX - 1 +}; + +/* Nest, connection info */ +enum { + TIPC_NLA_CON_UNSPEC, + + TIPC_NLA_CON_FLAG, /* flag */ + TIPC_NLA_CON_NODE, /* u32 */ + TIPC_NLA_CON_SOCK, /* u32 */ + TIPC_NLA_CON_TYPE, /* u32 */ + TIPC_NLA_CON_INST, /* u32 */ + + __TIPC_NLA_CON_MAX, + TIPC_NLA_CON_MAX = __TIPC_NLA_CON_MAX - 1 +}; + +/* Nest, socket statistics info */ +enum { + TIPC_NLA_SOCK_STAT_RCVQ, /* u32 */ + TIPC_NLA_SOCK_STAT_SENDQ, /* u32 */ + TIPC_NLA_SOCK_STAT_LINK_CONG, /* flag */ + TIPC_NLA_SOCK_STAT_CONN_CONG, /* flag */ + TIPC_NLA_SOCK_STAT_DROP, /* u32 */ + + __TIPC_NLA_SOCK_STAT_MAX, + TIPC_NLA_SOCK_STAT_MAX = __TIPC_NLA_SOCK_STAT_MAX - 1 +}; + +/* Nest, link propreties. Valid for link, media and bearer */ +enum { + TIPC_NLA_PROP_UNSPEC, + + TIPC_NLA_PROP_PRIO, /* u32 */ + TIPC_NLA_PROP_TOL, /* u32 */ + TIPC_NLA_PROP_WIN, /* u32 */ + TIPC_NLA_PROP_MTU, /* u32 */ + TIPC_NLA_PROP_BROADCAST, /* u32 */ + TIPC_NLA_PROP_BROADCAST_RATIO, /* u32 */ + + __TIPC_NLA_PROP_MAX, + TIPC_NLA_PROP_MAX = __TIPC_NLA_PROP_MAX - 1 +}; + +/* Nest, statistics info */ +enum { + TIPC_NLA_STATS_UNSPEC, + + TIPC_NLA_STATS_RX_INFO, /* u32 */ + TIPC_NLA_STATS_RX_FRAGMENTS, /* u32 */ + TIPC_NLA_STATS_RX_FRAGMENTED, /* u32 */ + TIPC_NLA_STATS_RX_BUNDLES, /* u32 */ + TIPC_NLA_STATS_RX_BUNDLED, /* u32 */ + TIPC_NLA_STATS_TX_INFO, /* u32 */ + TIPC_NLA_STATS_TX_FRAGMENTS, /* u32 */ + TIPC_NLA_STATS_TX_FRAGMENTED, /* u32 */ + TIPC_NLA_STATS_TX_BUNDLES, /* u32 */ + TIPC_NLA_STATS_TX_BUNDLED, /* u32 */ + TIPC_NLA_STATS_MSG_PROF_TOT, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_CNT, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_TOT, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P0, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P1, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P2, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P3, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P4, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P5, /* u32 */ + TIPC_NLA_STATS_MSG_LEN_P6, /* u32 */ + TIPC_NLA_STATS_RX_STATES, /* u32 */ + TIPC_NLA_STATS_RX_PROBES, /* u32 */ + TIPC_NLA_STATS_RX_NACKS, /* u32 */ + TIPC_NLA_STATS_RX_DEFERRED, /* u32 */ + TIPC_NLA_STATS_TX_STATES, /* u32 */ + TIPC_NLA_STATS_TX_PROBES, /* u32 */ + TIPC_NLA_STATS_TX_NACKS, /* u32 */ + TIPC_NLA_STATS_TX_ACKS, /* u32 */ + TIPC_NLA_STATS_RETRANSMITTED, /* u32 */ + TIPC_NLA_STATS_DUPLICATES, /* u32 */ + TIPC_NLA_STATS_LINK_CONGS, /* u32 */ + TIPC_NLA_STATS_MAX_QUEUE, /* u32 */ + TIPC_NLA_STATS_AVG_QUEUE, /* u32 */ + + __TIPC_NLA_STATS_MAX, + TIPC_NLA_STATS_MAX = __TIPC_NLA_STATS_MAX - 1 +}; + +#endif diff --git a/include/uapi/linux/tipc_sockets_diag.h b/include/uapi/linux/tipc_sockets_diag.h new file mode 100644 index 0000000..21b766e --- /dev/null +++ b/include/uapi/linux/tipc_sockets_diag.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* AF_TIPC sock_diag interface for querying open sockets */ + +#ifndef __TIPC_SOCKETS_DIAG_H__ +#define __TIPC_SOCKETS_DIAG_H__ + +#include <linux/types.h> +#include <linux/sock_diag.h> + +/* Request */ +struct tipc_sock_diag_req { + __u8 sdiag_family; /* must be AF_TIPC */ + __u8 sdiag_protocol; /* must be 0 */ + __u16 pad; /* must be 0 */ + __u32 tidiag_states; /* query*/ +}; +#endif /* __TIPC_SOCKETS_DIAG_H__ */ diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h new file mode 100644 index 0000000..dd7dea8 --- /dev/null +++ b/include/uapi/linux/tls.h @@ -0,0 +1,206 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR Linux-OpenIB) */ +/* + * Copyright (c) 2016-2017, Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _LINUX_TLS_H +#define _LINUX_TLS_H + +#include <linux/types.h> + +/* TLS socket options */ +#define TLS_TX 1 /* Set transmit parameters */ +#define TLS_RX 2 /* Set receive parameters */ +#define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ +#define TLS_RX_EXPECT_NO_PAD 4 /* Attempt opportunistic zero-copy */ + +/* Supported versions */ +#define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) +#define TLS_VERSION_MAJOR(ver) (((ver) >> 8) & 0xFF) + +#define TLS_VERSION_NUMBER(id) ((((id##_VERSION_MAJOR) & 0xFF) << 8) | \ + ((id##_VERSION_MINOR) & 0xFF)) + +#define TLS_1_2_VERSION_MAJOR 0x3 +#define TLS_1_2_VERSION_MINOR 0x3 +#define TLS_1_2_VERSION TLS_VERSION_NUMBER(TLS_1_2) + +#define TLS_1_3_VERSION_MAJOR 0x3 +#define TLS_1_3_VERSION_MINOR 0x4 +#define TLS_1_3_VERSION TLS_VERSION_NUMBER(TLS_1_3) + +/* Supported ciphers */ +#define TLS_CIPHER_AES_GCM_128 51 +#define TLS_CIPHER_AES_GCM_128_IV_SIZE 8 +#define TLS_CIPHER_AES_GCM_128_KEY_SIZE 16 +#define TLS_CIPHER_AES_GCM_128_SALT_SIZE 4 +#define TLS_CIPHER_AES_GCM_128_TAG_SIZE 16 +#define TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_AES_GCM_256 52 +#define TLS_CIPHER_AES_GCM_256_IV_SIZE 8 +#define TLS_CIPHER_AES_GCM_256_KEY_SIZE 32 +#define TLS_CIPHER_AES_GCM_256_SALT_SIZE 4 +#define TLS_CIPHER_AES_GCM_256_TAG_SIZE 16 +#define TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_AES_CCM_128 53 +#define TLS_CIPHER_AES_CCM_128_IV_SIZE 8 +#define TLS_CIPHER_AES_CCM_128_KEY_SIZE 16 +#define TLS_CIPHER_AES_CCM_128_SALT_SIZE 4 +#define TLS_CIPHER_AES_CCM_128_TAG_SIZE 16 +#define TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_CHACHA20_POLY1305 54 +#define TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE 12 +#define TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE 32 +#define TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE 0 +#define TLS_CIPHER_CHACHA20_POLY1305_TAG_SIZE 16 +#define TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_SM4_GCM 55 +#define TLS_CIPHER_SM4_GCM_IV_SIZE 8 +#define TLS_CIPHER_SM4_GCM_KEY_SIZE 16 +#define TLS_CIPHER_SM4_GCM_SALT_SIZE 4 +#define TLS_CIPHER_SM4_GCM_TAG_SIZE 16 +#define TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_SM4_CCM 56 +#define TLS_CIPHER_SM4_CCM_IV_SIZE 8 +#define TLS_CIPHER_SM4_CCM_KEY_SIZE 16 +#define TLS_CIPHER_SM4_CCM_SALT_SIZE 4 +#define TLS_CIPHER_SM4_CCM_TAG_SIZE 16 +#define TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_ARIA_GCM_128 57 +#define TLS_CIPHER_ARIA_GCM_128_IV_SIZE 8 +#define TLS_CIPHER_ARIA_GCM_128_KEY_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_128_SALT_SIZE 4 +#define TLS_CIPHER_ARIA_GCM_128_TAG_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_128_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_ARIA_GCM_256 58 +#define TLS_CIPHER_ARIA_GCM_256_IV_SIZE 8 +#define TLS_CIPHER_ARIA_GCM_256_KEY_SIZE 32 +#define TLS_CIPHER_ARIA_GCM_256_SALT_SIZE 4 +#define TLS_CIPHER_ARIA_GCM_256_TAG_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_256_REC_SEQ_SIZE 8 + +#define TLS_SET_RECORD_TYPE 1 +#define TLS_GET_RECORD_TYPE 2 + +struct tls_crypto_info { + __u16 version; + __u16 cipher_type; +}; + +struct tls12_crypto_info_aes_gcm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_GCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_GCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_GCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aes_gcm_256 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_GCM_256_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_GCM_256_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_GCM_256_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aes_ccm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_CCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_CCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_CCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_chacha20_poly1305 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE]; + unsigned char key[TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_sm4_gcm { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_SM4_GCM_IV_SIZE]; + unsigned char key[TLS_CIPHER_SM4_GCM_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_SM4_GCM_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_sm4_ccm { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_SM4_CCM_IV_SIZE]; + unsigned char key[TLS_CIPHER_SM4_CCM_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_SM4_CCM_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aria_gcm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_ARIA_GCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_ARIA_GCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_ARIA_GCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_ARIA_GCM_128_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aria_gcm_256 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_ARIA_GCM_256_IV_SIZE]; + unsigned char key[TLS_CIPHER_ARIA_GCM_256_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_ARIA_GCM_256_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_ARIA_GCM_256_REC_SEQ_SIZE]; +}; + +enum { + TLS_INFO_UNSPEC, + TLS_INFO_VERSION, + TLS_INFO_CIPHER, + TLS_INFO_TXCONF, + TLS_INFO_RXCONF, + TLS_INFO_ZC_RO_TX, + TLS_INFO_RX_NO_PAD, + __TLS_INFO_MAX, +}; +#define TLS_INFO_MAX (__TLS_INFO_MAX - 1) + +#define TLS_CONF_BASE 1 +#define TLS_CONF_SW 2 +#define TLS_CONF_HW 3 +#define TLS_CONF_HW_RECORD 4 + +#endif /* _LINUX_TLS_H */ diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h new file mode 100644 index 0000000..e670013 --- /dev/null +++ b/include/uapi/linux/types.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_TYPES_H +#define _LINUX_TYPES_H + +#include <asm/types.h> + +#ifndef __ASSEMBLY__ + +#include <linux/posix_types.h> + +#ifdef __SIZEOF_INT128__ +typedef __signed__ __int128 __s128 __attribute__((aligned(16))); +typedef unsigned __int128 __u128 __attribute__((aligned(16))); +#endif + +/* + * Below are truly Linux-specific types that should never collide with + * any application/library that wants linux/types.h. + */ + +/* sparse defines __CHECKER__; see Documentation/dev-tools/sparse.rst */ +#ifdef __CHECKER__ +#define __bitwise __attribute__((bitwise)) +#else +#define __bitwise +#endif + +/* The kernel doesn't use this legacy form, but user space does */ +#define __bitwise__ __bitwise + +typedef __u16 __bitwise __le16; +typedef __u16 __bitwise __be16; +typedef __u32 __bitwise __le32; +typedef __u32 __bitwise __be32; +typedef __u64 __bitwise __le64; +typedef __u64 __bitwise __be64; + +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; + +/* + * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid + * common 32/64-bit compat problems. + * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other + * architectures) and to 8-byte boundaries on 64-bit architectures. The new + * aligned_64 type enforces 8-byte alignment so that structs containing + * aligned_64 values have the same alignment on 32-bit and 64-bit architectures. + * No conversions are necessary between 32-bit user-space and a 64-bit kernel. + */ +#define __aligned_u64 __u64 __attribute__((aligned(8))) +#define __aligned_be64 __be64 __attribute__((aligned(8))) +#define __aligned_le64 __le64 __attribute__((aligned(8))) + +typedef unsigned __bitwise __poll_t; + +#endif /* __ASSEMBLY__ */ +#endif /* _LINUX_TYPES_H */ diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h new file mode 100644 index 0000000..d0a7223 --- /dev/null +++ b/include/uapi/linux/udp.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the UDP protocol. + * + * Version: @(#)udp.h 1.0.2 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_UDP_H +#define _LINUX_UDP_H + +#include <linux/types.h> + +struct udphdr { + __be16 source; + __be16 dest; + __be16 len; + __sum16 check; +}; + +/* UDP socket options */ +#define UDP_CORK 1 /* Never send partially complete segments */ +#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ +#define UDP_NO_CHECK6_TX 101 /* Disable sending checksum for UDP6X */ +#define UDP_NO_CHECK6_RX 102 /* Disable accpeting checksum for UDP6 */ +#define UDP_SEGMENT 103 /* Set GSO segmentation size */ +#define UDP_GRO 104 /* This socket can receive UDP GRO packets */ + +/* UDP encapsulation types */ +#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ +#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ +#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ +#define UDP_ENCAP_GTP0 4 /* GSM TS 09.60 */ +#define UDP_ENCAP_GTP1U 5 /* 3GPP TS 29.060 */ +#define UDP_ENCAP_RXRPC 6 +#define TCP_ENCAP_ESPINTCP 7 /* Yikes, this is really xfrm encap types. */ + +#endif /* _LINUX_UDP_H */ diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h new file mode 100644 index 0000000..a198857 --- /dev/null +++ b/include/uapi/linux/unix_diag.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __UNIX_DIAG_H__ +#define __UNIX_DIAG_H__ + +#include <linux/types.h> + +struct unix_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u16 pad; + __u32 udiag_states; + __u32 udiag_ino; + __u32 udiag_show; + __u32 udiag_cookie[2]; +}; + +#define UDIAG_SHOW_NAME 0x00000001 /* show name (not path) */ +#define UDIAG_SHOW_VFS 0x00000002 /* show VFS inode info */ +#define UDIAG_SHOW_PEER 0x00000004 /* show peer socket info */ +#define UDIAG_SHOW_ICONS 0x00000008 /* show pending connections */ +#define UDIAG_SHOW_RQLEN 0x00000010 /* show skb receive queue len */ +#define UDIAG_SHOW_MEMINFO 0x00000020 /* show memory info of a socket */ +#define UDIAG_SHOW_UID 0x00000040 /* show socket's UID */ + +struct unix_diag_msg { + __u8 udiag_family; + __u8 udiag_type; + __u8 udiag_state; + __u8 pad; + + __u32 udiag_ino; + __u32 udiag_cookie[2]; +}; + +enum { + /* UNIX_DIAG_NONE, standard nl API requires this attribute! */ + UNIX_DIAG_NAME, + UNIX_DIAG_VFS, + UNIX_DIAG_PEER, + UNIX_DIAG_ICONS, + UNIX_DIAG_RQLEN, + UNIX_DIAG_MEMINFO, + UNIX_DIAG_SHUTDOWN, + UNIX_DIAG_UID, + + __UNIX_DIAG_MAX, +}; + +#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1) + +struct unix_diag_vfs { + __u32 udiag_vfs_ino; + __u32 udiag_vfs_dev; +}; + +struct unix_diag_rqlen { + __u32 udiag_rqueue; + __u32 udiag_wqueue; +}; + +#endif diff --git a/include/uapi/linux/veth.h b/include/uapi/linux/veth.h new file mode 100644 index 0000000..52b58e5 --- /dev/null +++ b/include/uapi/linux/veth.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __NET_VETH_H_ +#define __NET_VETH_H_ + +enum { + VETH_INFO_UNSPEC, + VETH_INFO_PEER, + + __VETH_INFO_MAX +#define VETH_INFO_MAX (__VETH_INFO_MAX - 1) +}; + +#endif diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h new file mode 100644 index 0000000..3bf80a8 --- /dev/null +++ b/include/uapi/linux/virtio_config.h @@ -0,0 +1,121 @@ +#ifndef _LINUX_VIRTIO_CONFIG_H +#define _LINUX_VIRTIO_CONFIG_H +/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +/* Virtio devices use a standardized configuration space to define their + * features and pass configuration information, but each implementation can + * store and access that space differently. */ +#include <linux/types.h> + +/* Status byte for guest to report progress, and synchronize features. */ +/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ +#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 +/* We have found a driver for the device. */ +#define VIRTIO_CONFIG_S_DRIVER 2 +/* Driver has used its parts of the config, and is happy */ +#define VIRTIO_CONFIG_S_DRIVER_OK 4 +/* Driver has finished configuring features */ +#define VIRTIO_CONFIG_S_FEATURES_OK 8 +/* Device entered invalid state, driver must reset it */ +#define VIRTIO_CONFIG_S_NEEDS_RESET 0x40 +/* We've given up on this device. */ +#define VIRTIO_CONFIG_S_FAILED 0x80 + +/* + * Virtio feature bits VIRTIO_TRANSPORT_F_START through + * VIRTIO_TRANSPORT_F_END are reserved for the transport + * being used (e.g. virtio_ring, virtio_pci etc.), the + * rest are per-device feature bits. + */ +#define VIRTIO_TRANSPORT_F_START 28 +#define VIRTIO_TRANSPORT_F_END 42 + +#ifndef VIRTIO_CONFIG_NO_LEGACY +/* Do we get callbacks when the ring is completely used, even if we've + * suppressed them? */ +#define VIRTIO_F_NOTIFY_ON_EMPTY 24 + +/* Can the device handle any descriptor layout? */ +#define VIRTIO_F_ANY_LAYOUT 27 +#endif /* VIRTIO_CONFIG_NO_LEGACY */ + +/* v1.0 compliant. */ +#define VIRTIO_F_VERSION_1 32 + +/* + * If clear - device has the platform DMA (e.g. IOMMU) bypass quirk feature. + * If set - use platform DMA tools to access the memory. + * + * Note the reverse polarity (compared to most other features), + * this is for compatibility with legacy systems. + */ +#define VIRTIO_F_ACCESS_PLATFORM 33 +/* Legacy name for VIRTIO_F_ACCESS_PLATFORM (for compatibility with old userspace) */ +#define VIRTIO_F_IOMMU_PLATFORM VIRTIO_F_ACCESS_PLATFORM + +/* This feature indicates support for the packed virtqueue layout. */ +#define VIRTIO_F_RING_PACKED 34 + +/* + * Inorder feature indicates that all buffers are used by the device + * in the same order in which they have been made available. + */ +#define VIRTIO_F_IN_ORDER 35 + +/* + * This feature indicates that memory accesses by the driver and the + * device are ordered in a way described by the platform. + */ +#define VIRTIO_F_ORDER_PLATFORM 36 + +/* + * Does the device support Single Root I/O Virtualization? + */ +#define VIRTIO_F_SR_IOV 37 + +/* + * This feature indicates that the driver passes extra data (besides + * identifying the virtqueue) in its device notifications. + */ +#define VIRTIO_F_NOTIFICATION_DATA 38 + +/* This feature indicates that the driver uses the data provided by the device + * as a virtqueue identifier in available buffer notifications. + */ +#define VIRTIO_F_NOTIF_CONFIG_DATA 39 + +/* + * This feature indicates that the driver can reset a queue individually. + */ +#define VIRTIO_F_RING_RESET 40 + +/* + * This feature indicates that the device support administration virtqueues. + */ +#define VIRTIO_F_ADMIN_VQ 41 + +#endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h new file mode 100644 index 0000000..7aa2eb7 --- /dev/null +++ b/include/uapi/linux/virtio_ids.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_VIRTIO_IDS_H +#define _LINUX_VIRTIO_IDS_H +/* + * Virtio IDs + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio rng */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_IOMEM 6 /* virtio ioMemory */ +#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_MAC80211_WLAN 10 /* virtio WLAN MAC */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ +#define VIRTIO_ID_CAIF 12 /* Virtio caif */ +#define VIRTIO_ID_MEMORY_BALLOON 13 /* virtio memory balloon */ +#define VIRTIO_ID_GPU 16 /* virtio GPU */ +#define VIRTIO_ID_CLOCK 17 /* virtio clock/timer */ +#define VIRTIO_ID_INPUT 18 /* virtio input */ +#define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ +#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ +#define VIRTIO_ID_SIGNAL_DIST 21 /* virtio signal distribution device */ +#define VIRTIO_ID_PSTORE 22 /* virtio pstore device */ +#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ +#define VIRTIO_ID_MEM 24 /* virtio mem */ +#define VIRTIO_ID_SOUND 25 /* virtio sound */ +#define VIRTIO_ID_FS 26 /* virtio filesystem */ +#define VIRTIO_ID_PMEM 27 /* virtio pmem */ +#define VIRTIO_ID_RPMB 28 /* virtio rpmb */ +#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ +#define VIRTIO_ID_VIDEO_ENCODER 30 /* virtio video encoder */ +#define VIRTIO_ID_VIDEO_DECODER 31 /* virtio video decoder */ +#define VIRTIO_ID_SCMI 32 /* virtio SCMI */ +#define VIRTIO_ID_NITRO_SEC_MOD 33 /* virtio nitro secure module*/ +#define VIRTIO_ID_I2C_ADAPTER 34 /* virtio i2c adapter */ +#define VIRTIO_ID_WATCHDOG 35 /* virtio watchdog */ +#define VIRTIO_ID_CAN 36 /* virtio can */ +#define VIRTIO_ID_DMABUF 37 /* virtio dmabuf */ +#define VIRTIO_ID_PARAM_SERV 38 /* virtio parameter server */ +#define VIRTIO_ID_AUDIO_POLICY 39 /* virtio audio policy */ +#define VIRTIO_ID_BT 40 /* virtio bluetooth */ +#define VIRTIO_ID_GPIO 41 /* virtio gpio */ + +/* + * Virtio Transitional IDs + */ + +#define VIRTIO_TRANS_ID_NET 0x1000 /* transitional virtio net */ +#define VIRTIO_TRANS_ID_BLOCK 0x1001 /* transitional virtio block */ +#define VIRTIO_TRANS_ID_BALLOON 0x1002 /* transitional virtio balloon */ +#define VIRTIO_TRANS_ID_CONSOLE 0x1003 /* transitional virtio console */ +#define VIRTIO_TRANS_ID_SCSI 0x1004 /* transitional virtio SCSI */ +#define VIRTIO_TRANS_ID_RNG 0x1005 /* transitional virtio rng */ +#define VIRTIO_TRANS_ID_9P 0x1009 /* transitional virtio 9p console */ + +#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h new file mode 100644 index 0000000..5775077 --- /dev/null +++ b/include/uapi/linux/virtio_net.h @@ -0,0 +1,409 @@ +#ifndef _LINUX_VIRTIO_NET_H +#define _LINUX_VIRTIO_NET_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include <linux/types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> +#include <linux/virtio_types.h> +#include <linux/if_ether.h> + +/* The feature bitmap for virtio net */ +#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ +#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ +#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */ +#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */ +#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ +#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ +#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ +#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ +#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ +#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ +#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ +#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ +#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ +#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ +#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ +#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the + * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ +#define VIRTIO_NET_F_VQ_NOTF_COAL 52 /* Device supports virtqueue notification coalescing */ +#define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ +#define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ +#define VIRTIO_NET_F_GUEST_USO6 55 /* Guest can handle USOv6 in. */ +#define VIRTIO_NET_F_HOST_USO 56 /* Host can handle USO in. */ +#define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */ +#define VIRTIO_NET_F_GUEST_HDRLEN 59 /* Guest provides the exact hdr_len value. */ +#define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */ +#define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */ +#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device + * with the same MAC. + */ +#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */ + +#ifndef VIRTIO_NET_NO_LEGACY +#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ +#endif /* VIRTIO_NET_NO_LEGACY */ + +#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ + +/* supported/enabled hash types */ +#define VIRTIO_NET_RSS_HASH_TYPE_IPv4 (1 << 0) +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv4 (1 << 1) +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv4 (1 << 2) +#define VIRTIO_NET_RSS_HASH_TYPE_IPv6 (1 << 3) +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv6 (1 << 4) +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv6 (1 << 5) +#define VIRTIO_NET_RSS_HASH_TYPE_IP_EX (1 << 6) +#define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX (1 << 7) +#define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX (1 << 8) + +struct virtio_net_config { + /* The config defining mac address (if VIRTIO_NET_F_MAC) */ + __u8 mac[ETH_ALEN]; + /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ + __virtio16 status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + __virtio16 max_virtqueue_pairs; + /* Default maximum transmit unit advice */ + __virtio16 mtu; + /* + * speed, in units of 1Mb. All values 0 to INT_MAX are legal. + * Any other value stands for unknown. + */ + __le32 speed; + /* + * 0x00 - half duplex + * 0x01 - full duplex + * Any other value stands for unknown. + */ + __u8 duplex; + /* maximum size of RSS key */ + __u8 rss_max_key_size; + /* maximum number of indirection table entries */ + __le16 rss_max_indirection_table_length; + /* bitmask of supported VIRTIO_NET_RSS_HASH_ types */ + __le32 supported_hash_types; +} __attribute__((packed)); + +/* + * This header comes first in the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. + * + * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf, + * only flattened. + */ +struct virtio_net_hdr_v1 { +#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */ +#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ +#define VIRTIO_NET_HDR_F_RSC_INFO 4 /* rsc info in csum_ fields */ + __u8 flags; +#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ +#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ +#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ +#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_UDP_L4 5 /* GSO frame, IPv4& IPv6 UDP (USO) */ +#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ + __u8 gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + union { + struct { + __virtio16 csum_start; + __virtio16 csum_offset; + }; + /* Checksum calculation */ + struct { + /* Position to start checksumming from */ + __virtio16 start; + /* Offset after that to place checksum */ + __virtio16 offset; + } csum; + /* Receive Segment Coalescing */ + struct { + /* Number of coalesced segments */ + __le16 segments; + /* Number of duplicated acks */ + __le16 dup_acks; + } rsc; + }; + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; + +struct virtio_net_hdr_v1_hash { + struct virtio_net_hdr_v1 hdr; + __le32 hash_value; +#define VIRTIO_NET_HASH_REPORT_NONE 0 +#define VIRTIO_NET_HASH_REPORT_IPv4 1 +#define VIRTIO_NET_HASH_REPORT_TCPv4 2 +#define VIRTIO_NET_HASH_REPORT_UDPv4 3 +#define VIRTIO_NET_HASH_REPORT_IPv6 4 +#define VIRTIO_NET_HASH_REPORT_TCPv6 5 +#define VIRTIO_NET_HASH_REPORT_UDPv6 6 +#define VIRTIO_NET_HASH_REPORT_IPv6_EX 7 +#define VIRTIO_NET_HASH_REPORT_TCPv6_EX 8 +#define VIRTIO_NET_HASH_REPORT_UDPv6_EX 9 + __le16 hash_report; + __le16 padding; +}; + +#ifndef VIRTIO_NET_NO_LEGACY +/* This header comes first in the scatter-gather list. + * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. */ +struct virtio_net_hdr { + /* See VIRTIO_NET_HDR_F_* */ + __u8 flags; + /* See VIRTIO_NET_HDR_GSO_* */ + __u8 gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + __virtio16 csum_start; /* Position to start checksumming from */ + __virtio16 csum_offset; /* Offset after that to place checksum */ +}; + +/* This is the version of the header to use when the MRG_RXBUF + * feature has been negotiated. */ +struct virtio_net_hdr_mrg_rxbuf { + struct virtio_net_hdr hdr; + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; +#endif /* ...VIRTIO_NET_NO_LEGACY */ + +/* + * Control virtqueue data structures + * + * The control virtqueue expects a header in the first sg entry + * and an ack/status response in the last entry. Data for the + * command goes in between. + */ +struct virtio_net_ctrl_hdr { + __u8 class; + __u8 cmd; +} __attribute__((packed)); + +typedef __u8 virtio_net_ctrl_ack; + +#define VIRTIO_NET_OK 0 +#define VIRTIO_NET_ERR 1 + +/* + * Control the RX mode, ie. promisucous, allmulti, etc... + * All commands require an "out" sg entry containing a 1 byte + * state value, zero = disable, non-zero = enable. Commands + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. + */ +#define VIRTIO_NET_CTRL_RX 0 + #define VIRTIO_NET_CTRL_RX_PROMISC 0 + #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 + #define VIRTIO_NET_CTRL_RX_ALLUNI 2 + #define VIRTIO_NET_CTRL_RX_NOMULTI 3 + #define VIRTIO_NET_CTRL_RX_NOUNI 4 + #define VIRTIO_NET_CTRL_RX_NOBCAST 5 + +/* + * Control the MAC + * + * The MAC filter table is managed by the hypervisor, the guest should + * assume the size is infinite. Filtering should be considered + * non-perfect, ie. based on hypervisor resources, the guest may + * received packets from sources not specified in the filter list. + * + * In addition to the class/cmd header, the TABLE_SET command requires + * two out scatterlists. Each contains a 4 byte count of entries followed + * by a concatenated byte stream of the ETH_ALEN MAC addresses. The + * first sg list contains unicast addresses, the second is for multicast. + * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature + * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. + */ +struct virtio_net_ctrl_mac { + __virtio32 entries; + __u8 macs[][ETH_ALEN]; +} __attribute__((packed)); + +#define VIRTIO_NET_CTRL_MAC 1 + #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 + +/* + * Control VLAN filtering + * + * The VLAN filter table is controlled via a simple ADD/DEL interface. + * VLAN IDs not added may be filterd by the hypervisor. Del is the + * opposite of add. Both commands expect an out entry containing a 2 + * byte VLAN ID. VLAN filterting is available with the + * VIRTIO_NET_F_CTRL_VLAN feature bit. + */ +#define VIRTIO_NET_CTRL_VLAN 2 + #define VIRTIO_NET_CTRL_VLAN_ADD 0 + #define VIRTIO_NET_CTRL_VLAN_DEL 1 + +/* + * Control link announce acknowledgement + * + * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that + * driver has recevied the notification; device would clear the + * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives + * this command. + */ +#define VIRTIO_NET_CTRL_ANNOUNCE 3 + #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 + +/* + * Control Receive Flow Steering + */ +#define VIRTIO_NET_CTRL_MQ 4 +/* + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + __virtio16 virtqueue_pairs; +}; + + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + +/* + * The command VIRTIO_NET_CTRL_MQ_RSS_CONFIG has the same effect as + * VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET does and additionally configures + * the receive steering to use a hash calculated for incoming packet + * to decide on receive virtqueue to place the packet. The command + * also provides parameters to calculate a hash and receive virtqueue. + */ +struct virtio_net_rss_config { + __le32 hash_types; + __le16 indirection_table_mask; + __le16 unclassified_queue; + __le16 indirection_table[1/* + indirection_table_mask */]; + __le16 max_tx_vq; + __u8 hash_key_length; + __u8 hash_key_data[/* hash_key_length */]; +}; + + #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG 1 + +/* + * The command VIRTIO_NET_CTRL_MQ_HASH_CONFIG requests the device + * to include in the virtio header of the packet the value of the + * calculated hash and the report type of hash. It also provides + * parameters for hash calculation. The command requires feature + * VIRTIO_NET_F_HASH_REPORT to be negotiated to extend the + * layout of virtio header as defined in virtio_net_hdr_v1_hash. + */ +struct virtio_net_hash_config { + __le32 hash_types; + /* for compatibility with virtio_net_rss_config */ + __le16 reserved[4]; + __u8 hash_key_length; + __u8 hash_key_data[/* hash_key_length */]; +}; + + #define VIRTIO_NET_CTRL_MQ_HASH_CONFIG 2 + +/* + * Control network offloads + * + * Reconfigures the network offloads that Guest can handle. + * + * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit. + * + * Command data format matches the feature bit mask exactly. + * + * See VIRTIO_NET_F_GUEST_* for the list of offloads + * that can be enabled/disabled. + */ +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5 +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 + +/* + * Control notifications coalescing. + * + * Request the device to change the notifications coalescing parameters. + * + * Available with the VIRTIO_NET_F_NOTF_COAL feature bit. + */ +#define VIRTIO_NET_CTRL_NOTF_COAL 6 +/* + * Set the tx-usecs/tx-max-packets parameters. + */ +struct virtio_net_ctrl_coal_tx { + /* Maximum number of packets to send before a TX notification */ + __le32 tx_max_packets; + /* Maximum number of usecs to delay a TX notification */ + __le32 tx_usecs; +}; + +#define VIRTIO_NET_CTRL_NOTF_COAL_TX_SET 0 + +/* + * Set the rx-usecs/rx-max-packets parameters. + */ +struct virtio_net_ctrl_coal_rx { + /* Maximum number of packets to receive before a RX notification */ + __le32 rx_max_packets; + /* Maximum number of usecs to delay a RX notification */ + __le32 rx_usecs; +}; + +#define VIRTIO_NET_CTRL_NOTF_COAL_RX_SET 1 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET 2 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET 3 + +struct virtio_net_ctrl_coal { + __le32 max_packets; + __le32 max_usecs; +}; + +struct virtio_net_ctrl_coal_vq { + __le16 vqn; + __le16 reserved; + struct virtio_net_ctrl_coal coal; +}; + +#endif /* _LINUX_VIRTIO_NET_H */ diff --git a/include/uapi/linux/virtio_types.h b/include/uapi/linux/virtio_types.h new file mode 100644 index 0000000..4eac2e1 --- /dev/null +++ b/include/uapi/linux/virtio_types.h @@ -0,0 +1,46 @@ +#ifndef _LINUX_VIRTIO_TYPES_H +#define _LINUX_VIRTIO_TYPES_H +/* Type definitions for virtio implementations. + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright (C) 2014 Red Hat, Inc. + * Author: Michael S. Tsirkin <mst@redhat.com> + */ +#include <linux/types.h> + +/* + * __virtio{16,32,64} have the following meaning: + * - __u{16,32,64} for virtio devices in legacy mode, accessed in native endian + * - __le{16,32,64} for standard-compliant virtio devices + */ + +typedef __u16 __bitwise __virtio16; +typedef __u32 __bitwise __virtio32; +typedef __u64 __bitwise __virtio64; + +#endif /* _LINUX_VIRTIO_TYPES_H */ diff --git a/include/uapi/linux/vm_sockets_diag.h b/include/uapi/linux/vm_sockets_diag.h new file mode 100644 index 0000000..6da42f9 --- /dev/null +++ b/include/uapi/linux/vm_sockets_diag.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* AF_VSOCK sock_diag(7) interface for querying open sockets */ + +#ifndef __VM_SOCKETS_DIAG_H__ +#define __VM_SOCKETS_DIAG_H__ + +#include <linux/types.h> + +/* Request */ +struct vsock_diag_req { + __u8 sdiag_family; /* must be AF_VSOCK */ + __u8 sdiag_protocol; /* must be 0 */ + __u16 pad; /* must be 0 */ + __u32 vdiag_states; /* query bitmap (e.g. 1 << TCP_LISTEN) */ + __u32 vdiag_ino; /* must be 0 (reserved) */ + __u32 vdiag_show; /* must be 0 (reserved) */ + __u32 vdiag_cookie[2]; +}; + +/* Response */ +struct vsock_diag_msg { + __u8 vdiag_family; /* AF_VSOCK */ + __u8 vdiag_type; /* SOCK_STREAM or SOCK_DGRAM */ + __u8 vdiag_state; /* sk_state (e.g. TCP_LISTEN) */ + __u8 vdiag_shutdown; /* local RCV_SHUTDOWN | SEND_SHUTDOWN */ + __u32 vdiag_src_cid; + __u32 vdiag_src_port; + __u32 vdiag_dst_cid; + __u32 vdiag_dst_port; + __u32 vdiag_ino; + __u32 vdiag_cookie[2]; +}; + +#endif /* __VM_SOCKETS_DIAG_H__ */ diff --git a/include/uapi/linux/wwan.h b/include/uapi/linux/wwan.h new file mode 100644 index 0000000..2c0ccb4 --- /dev/null +++ b/include/uapi/linux/wwan.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Copyright (C) 2021 Intel Corporation. + */ +#ifndef _WWAN_H_ +#define _WWAN_H_ + +enum { + IFLA_WWAN_UNSPEC, + IFLA_WWAN_LINK_ID, /* u32 */ + + __IFLA_WWAN_MAX +}; +#define IFLA_WWAN_MAX (__IFLA_WWAN_MAX - 1) + +#endif /* _WWAN_H_ */ diff --git a/include/uapi/linux/xdp_diag.h b/include/uapi/linux/xdp_diag.h new file mode 100644 index 0000000..66b9973 --- /dev/null +++ b/include/uapi/linux/xdp_diag.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * xdp_diag: interface for query/monitor XDP sockets + * Copyright(c) 2019 Intel Corporation. + */ + +#ifndef _LINUX_XDP_DIAG_H +#define _LINUX_XDP_DIAG_H + +#include <linux/types.h> + +struct xdp_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u16 pad; + __u32 xdiag_ino; + __u32 xdiag_show; + __u32 xdiag_cookie[2]; +}; + +struct xdp_diag_msg { + __u8 xdiag_family; + __u8 xdiag_type; + __u16 pad; + __u32 xdiag_ino; + __u32 xdiag_cookie[2]; +}; + +#define XDP_SHOW_INFO (1 << 0) /* Basic information */ +#define XDP_SHOW_RING_CFG (1 << 1) +#define XDP_SHOW_UMEM (1 << 2) +#define XDP_SHOW_MEMINFO (1 << 3) +#define XDP_SHOW_STATS (1 << 4) + +enum { + XDP_DIAG_NONE, + XDP_DIAG_INFO, + XDP_DIAG_UID, + XDP_DIAG_RX_RING, + XDP_DIAG_TX_RING, + XDP_DIAG_UMEM, + XDP_DIAG_UMEM_FILL_RING, + XDP_DIAG_UMEM_COMPLETION_RING, + XDP_DIAG_MEMINFO, + XDP_DIAG_STATS, + __XDP_DIAG_MAX, +}; + +#define XDP_DIAG_MAX (__XDP_DIAG_MAX - 1) + +struct xdp_diag_info { + __u32 ifindex; + __u32 queue_id; +}; + +struct xdp_diag_ring { + __u32 entries; /*num descs */ +}; + +#define XDP_DU_F_ZEROCOPY (1 << 0) + +struct xdp_diag_umem { + __u64 size; + __u32 id; + __u32 num_pages; + __u32 chunk_size; + __u32 headroom; + __u32 ifindex; + __u32 queue_id; + __u32 flags; + __u32 refs; +}; + +struct xdp_diag_stats { + __u64 n_rx_dropped; + __u64 n_rx_invalid; + __u64 n_rx_full; + __u64 n_fill_ring_empty; + __u64 n_tx_invalid; + __u64 n_tx_ring_empty; +}; + +#endif /* _LINUX_XDP_DIAG_H */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h new file mode 100644 index 0000000..43efaec --- /dev/null +++ b/include/uapi/linux/xfrm.h @@ -0,0 +1,569 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_XFRM_H +#define _LINUX_XFRM_H + +#include <linux/in6.h> +#include <linux/types.h> +#include <linux/stddef.h> + +/* All of the structures in this file may not change size as they are + * passed into the kernel from userspace via netlink sockets. + */ + +/* Structure to encapsulate addresses. I do not want to use + * "standard" structure. My apologies. + */ +typedef union { + __be32 a4; + __be32 a6[4]; + struct in6_addr in6; +} xfrm_address_t; + +/* Ident of a specific xfrm_state. It is used on input to lookup + * the state by (spi,daddr,ah/esp) or to store information about + * spi, protocol and tunnel address on output. + */ +struct xfrm_id { + xfrm_address_t daddr; + __be32 spi; + __u8 proto; +}; + +struct xfrm_sec_ctx { + __u8 ctx_doi; + __u8 ctx_alg; + __u16 ctx_len; + __u32 ctx_sid; + char ctx_str[] __counted_by(ctx_len); +}; + +/* Security Context Domains of Interpretation */ +#define XFRM_SC_DOI_RESERVED 0 +#define XFRM_SC_DOI_LSM 1 + +/* Security Context Algorithms */ +#define XFRM_SC_ALG_RESERVED 0 +#define XFRM_SC_ALG_SELINUX 1 + +/* Selector, used as selector both on policy rules (SPD) and SAs. */ + +struct xfrm_selector { + xfrm_address_t daddr; + xfrm_address_t saddr; + __be16 dport; + __be16 dport_mask; + __be16 sport; + __be16 sport_mask; + __u16 family; + __u8 prefixlen_d; + __u8 prefixlen_s; + __u8 proto; + int ifindex; + __kernel_uid32_t user; +}; + +#define XFRM_INF (~(__u64)0) + +struct xfrm_lifetime_cfg { + __u64 soft_byte_limit; + __u64 hard_byte_limit; + __u64 soft_packet_limit; + __u64 hard_packet_limit; + __u64 soft_add_expires_seconds; + __u64 hard_add_expires_seconds; + __u64 soft_use_expires_seconds; + __u64 hard_use_expires_seconds; +}; + +struct xfrm_lifetime_cur { + __u64 bytes; + __u64 packets; + __u64 add_time; + __u64 use_time; +}; + +struct xfrm_replay_state { + __u32 oseq; + __u32 seq; + __u32 bitmap; +}; + +#define XFRMA_REPLAY_ESN_MAX 4096 + +struct xfrm_replay_state_esn { + unsigned int bmp_len; + __u32 oseq; + __u32 seq; + __u32 oseq_hi; + __u32 seq_hi; + __u32 replay_window; + __u32 bmp[]; +}; + +struct xfrm_algo { + char alg_name[64]; + unsigned int alg_key_len; /* in bits */ + char alg_key[]; +}; + +struct xfrm_algo_auth { + char alg_name[64]; + unsigned int alg_key_len; /* in bits */ + unsigned int alg_trunc_len; /* in bits */ + char alg_key[]; +}; + +struct xfrm_algo_aead { + char alg_name[64]; + unsigned int alg_key_len; /* in bits */ + unsigned int alg_icv_len; /* in bits */ + char alg_key[]; +}; + +struct xfrm_stats { + __u32 replay_window; + __u32 replay; + __u32 integrity_failed; +}; + +enum { + XFRM_POLICY_TYPE_MAIN = 0, + XFRM_POLICY_TYPE_SUB = 1, + XFRM_POLICY_TYPE_MAX = 2, + XFRM_POLICY_TYPE_ANY = 255 +}; + +enum { + XFRM_POLICY_IN = 0, + XFRM_POLICY_OUT = 1, + XFRM_POLICY_FWD = 2, + XFRM_POLICY_MASK = 3, + XFRM_POLICY_MAX = 3 +}; + +enum { + XFRM_SHARE_ANY, /* No limitations */ + XFRM_SHARE_SESSION, /* For this session only */ + XFRM_SHARE_USER, /* For this user only */ + XFRM_SHARE_UNIQUE /* Use once */ +}; + +#define XFRM_MODE_TRANSPORT 0 +#define XFRM_MODE_TUNNEL 1 +#define XFRM_MODE_ROUTEOPTIMIZATION 2 +#define XFRM_MODE_IN_TRIGGER 3 +#define XFRM_MODE_BEET 4 +#define XFRM_MODE_MAX 5 + +/* Netlink configuration messages. */ +enum { + XFRM_MSG_BASE = 0x10, + + XFRM_MSG_NEWSA = 0x10, +#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA + XFRM_MSG_DELSA, +#define XFRM_MSG_DELSA XFRM_MSG_DELSA + XFRM_MSG_GETSA, +#define XFRM_MSG_GETSA XFRM_MSG_GETSA + + XFRM_MSG_NEWPOLICY, +#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY + XFRM_MSG_DELPOLICY, +#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY + XFRM_MSG_GETPOLICY, +#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY + + XFRM_MSG_ALLOCSPI, +#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI + XFRM_MSG_ACQUIRE, +#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE + XFRM_MSG_EXPIRE, +#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE + + XFRM_MSG_UPDPOLICY, +#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY + XFRM_MSG_UPDSA, +#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA + + XFRM_MSG_POLEXPIRE, +#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE + + XFRM_MSG_FLUSHSA, +#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA + XFRM_MSG_FLUSHPOLICY, +#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY + + XFRM_MSG_NEWAE, +#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE + XFRM_MSG_GETAE, +#define XFRM_MSG_GETAE XFRM_MSG_GETAE + + XFRM_MSG_REPORT, +#define XFRM_MSG_REPORT XFRM_MSG_REPORT + + XFRM_MSG_MIGRATE, +#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE + + XFRM_MSG_NEWSADINFO, +#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO + XFRM_MSG_GETSADINFO, +#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO + + XFRM_MSG_NEWSPDINFO, +#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO + XFRM_MSG_GETSPDINFO, +#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO + + XFRM_MSG_MAPPING, +#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING + + XFRM_MSG_SETDEFAULT, +#define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT + XFRM_MSG_GETDEFAULT, +#define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT + __XFRM_MSG_MAX +}; +#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) + +#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE) + +/* + * Generic LSM security context for comunicating to user space + * NOTE: Same format as sadb_x_sec_ctx + */ +struct xfrm_user_sec_ctx { + __u16 len; + __u16 exttype; + __u8 ctx_alg; /* LSMs: e.g., selinux == 1 */ + __u8 ctx_doi; + __u16 ctx_len; +}; + +struct xfrm_user_tmpl { + struct xfrm_id id; + __u16 family; + xfrm_address_t saddr; + __u32 reqid; + __u8 mode; + __u8 share; + __u8 optional; + __u32 aalgos; + __u32 ealgos; + __u32 calgos; +}; + +struct xfrm_encap_tmpl { + __u16 encap_type; + __be16 encap_sport; + __be16 encap_dport; + xfrm_address_t encap_oa; +}; + +/* AEVENT flags */ +enum xfrm_ae_ftype_t { + XFRM_AE_UNSPEC, + XFRM_AE_RTHR=1, /* replay threshold*/ + XFRM_AE_RVAL=2, /* replay value */ + XFRM_AE_LVAL=4, /* lifetime value */ + XFRM_AE_ETHR=8, /* expiry timer threshold */ + XFRM_AE_CR=16, /* Event cause is replay update */ + XFRM_AE_CE=32, /* Event cause is timer expiry */ + XFRM_AE_CU=64, /* Event cause is policy update */ + __XFRM_AE_MAX + +#define XFRM_AE_MAX (__XFRM_AE_MAX - 1) +}; + +struct xfrm_userpolicy_type { + __u8 type; + __u16 reserved1; + __u8 reserved2; +}; + +/* Netlink message attributes. */ +enum xfrm_attr_type_t { + XFRMA_UNSPEC, + XFRMA_ALG_AUTH, /* struct xfrm_algo */ + XFRMA_ALG_CRYPT, /* struct xfrm_algo */ + XFRMA_ALG_COMP, /* struct xfrm_algo */ + XFRMA_ENCAP, /* struct xfrm_algo + struct xfrm_encap_tmpl */ + XFRMA_TMPL, /* 1 or more struct xfrm_user_tmpl */ + XFRMA_SA, /* struct xfrm_usersa_info */ + XFRMA_POLICY, /*struct xfrm_userpolicy_info */ + XFRMA_SEC_CTX, /* struct xfrm_sec_ctx */ + XFRMA_LTIME_VAL, + XFRMA_REPLAY_VAL, + XFRMA_REPLAY_THRESH, + XFRMA_ETIMER_THRESH, + XFRMA_SRCADDR, /* xfrm_address_t */ + XFRMA_COADDR, /* xfrm_address_t */ + XFRMA_LASTUSED, /* __u64 */ + XFRMA_POLICY_TYPE, /* struct xfrm_userpolicy_type */ + XFRMA_MIGRATE, + XFRMA_ALG_AEAD, /* struct xfrm_algo_aead */ + XFRMA_KMADDRESS, /* struct xfrm_user_kmaddress */ + XFRMA_ALG_AUTH_TRUNC, /* struct xfrm_algo_auth */ + XFRMA_MARK, /* struct xfrm_mark */ + XFRMA_TFCPAD, /* __u32 */ + XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_state_esn */ + XFRMA_SA_EXTRA_FLAGS, /* __u32 */ + XFRMA_PROTO, /* __u8 */ + XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ + XFRMA_PAD, + XFRMA_OFFLOAD_DEV, /* struct xfrm_user_offload */ + XFRMA_SET_MARK, /* __u32 */ + XFRMA_SET_MARK_MASK, /* __u32 */ + XFRMA_IF_ID, /* __u32 */ + XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */ + __XFRMA_MAX + +#define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */ +#define XFRMA_MAX (__XFRMA_MAX - 1) +}; + +struct xfrm_mark { + __u32 v; /* value */ + __u32 m; /* mask */ +}; + +enum xfrm_sadattr_type_t { + XFRMA_SAD_UNSPEC, + XFRMA_SAD_CNT, + XFRMA_SAD_HINFO, + __XFRMA_SAD_MAX + +#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1) +}; + +struct xfrmu_sadhinfo { + __u32 sadhcnt; /* current hash bkts */ + __u32 sadhmcnt; /* max allowed hash bkts */ +}; + +enum xfrm_spdattr_type_t { + XFRMA_SPD_UNSPEC, + XFRMA_SPD_INFO, + XFRMA_SPD_HINFO, + XFRMA_SPD_IPV4_HTHRESH, + XFRMA_SPD_IPV6_HTHRESH, + __XFRMA_SPD_MAX + +#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1) +}; + +struct xfrmu_spdinfo { + __u32 incnt; + __u32 outcnt; + __u32 fwdcnt; + __u32 inscnt; + __u32 outscnt; + __u32 fwdscnt; +}; + +struct xfrmu_spdhinfo { + __u32 spdhcnt; + __u32 spdhmcnt; +}; + +struct xfrmu_spdhthresh { + __u8 lbits; + __u8 rbits; +}; + +struct xfrm_usersa_info { + struct xfrm_selector sel; + struct xfrm_id id; + xfrm_address_t saddr; + struct xfrm_lifetime_cfg lft; + struct xfrm_lifetime_cur curlft; + struct xfrm_stats stats; + __u32 seq; + __u32 reqid; + __u16 family; + __u8 mode; /* XFRM_MODE_xxx */ + __u8 replay_window; + __u8 flags; +#define XFRM_STATE_NOECN 1 +#define XFRM_STATE_DECAP_DSCP 2 +#define XFRM_STATE_NOPMTUDISC 4 +#define XFRM_STATE_WILDRECV 8 +#define XFRM_STATE_ICMP 16 +#define XFRM_STATE_AF_UNSPEC 32 +#define XFRM_STATE_ALIGN4 64 +#define XFRM_STATE_ESN 128 +}; + +#define XFRM_SA_XFLAG_DONT_ENCAP_DSCP 1 +#define XFRM_SA_XFLAG_OSEQ_MAY_WRAP 2 + +struct xfrm_usersa_id { + xfrm_address_t daddr; + __be32 spi; + __u16 family; + __u8 proto; +}; + +struct xfrm_aevent_id { + struct xfrm_usersa_id sa_id; + xfrm_address_t saddr; + __u32 flags; + __u32 reqid; +}; + +struct xfrm_userspi_info { + struct xfrm_usersa_info info; + __u32 min; + __u32 max; +}; + +struct xfrm_userpolicy_info { + struct xfrm_selector sel; + struct xfrm_lifetime_cfg lft; + struct xfrm_lifetime_cur curlft; + __u32 priority; + __u32 index; + __u8 dir; + __u8 action; +#define XFRM_POLICY_ALLOW 0 +#define XFRM_POLICY_BLOCK 1 + __u8 flags; +#define XFRM_POLICY_LOCALOK 1 /* Allow user to override global policy */ + /* Automatically expand selector to include matching ICMP payloads. */ +#define XFRM_POLICY_ICMP 2 + __u8 share; +}; + +struct xfrm_userpolicy_id { + struct xfrm_selector sel; + __u32 index; + __u8 dir; +}; + +struct xfrm_user_acquire { + struct xfrm_id id; + xfrm_address_t saddr; + struct xfrm_selector sel; + struct xfrm_userpolicy_info policy; + __u32 aalgos; + __u32 ealgos; + __u32 calgos; + __u32 seq; +}; + +struct xfrm_user_expire { + struct xfrm_usersa_info state; + __u8 hard; +}; + +struct xfrm_user_polexpire { + struct xfrm_userpolicy_info pol; + __u8 hard; +}; + +struct xfrm_usersa_flush { + __u8 proto; +}; + +struct xfrm_user_report { + __u8 proto; + struct xfrm_selector sel; +}; + +/* Used by MIGRATE to pass addresses IKE should use to perform + * SA negotiation with the peer */ +struct xfrm_user_kmaddress { + xfrm_address_t local; + xfrm_address_t remote; + __u32 reserved; + __u16 family; +}; + +struct xfrm_user_migrate { + xfrm_address_t old_daddr; + xfrm_address_t old_saddr; + xfrm_address_t new_daddr; + xfrm_address_t new_saddr; + __u8 proto; + __u8 mode; + __u16 reserved; + __u32 reqid; + __u16 old_family; + __u16 new_family; +}; + +struct xfrm_user_mapping { + struct xfrm_usersa_id id; + __u32 reqid; + xfrm_address_t old_saddr; + xfrm_address_t new_saddr; + __be16 old_sport; + __be16 new_sport; +}; + +struct xfrm_address_filter { + xfrm_address_t saddr; + xfrm_address_t daddr; + __u16 family; + __u8 splen; + __u8 dplen; +}; + +struct xfrm_user_offload { + int ifindex; + __u8 flags; +}; +/* This flag was exposed without any kernel code that supports it. + * Unfortunately, strongswan has the code that sets this flag, + * which makes it impossible to reuse this bit. + * + * So leave it here to make sure that it won't be reused by mistake. + */ +#define XFRM_OFFLOAD_IPV6 1 +#define XFRM_OFFLOAD_INBOUND 2 +/* Two bits above are relevant for state path only, while + * offload is used for both policy and state flows. + * + * In policy offload mode, they are free and can be safely reused. + */ +#define XFRM_OFFLOAD_PACKET 4 + +struct xfrm_userpolicy_default { +#define XFRM_USERPOLICY_UNSPEC 0 +#define XFRM_USERPOLICY_BLOCK 1 +#define XFRM_USERPOLICY_ACCEPT 2 + __u8 in; + __u8 fwd; + __u8 out; +}; + +/* backwards compatibility for userspace */ +#define XFRMGRP_ACQUIRE 1 +#define XFRMGRP_EXPIRE 2 +#define XFRMGRP_SA 4 +#define XFRMGRP_POLICY 8 +#define XFRMGRP_REPORT 0x20 + +enum xfrm_nlgroups { + XFRMNLGRP_NONE, +#define XFRMNLGRP_NONE XFRMNLGRP_NONE + XFRMNLGRP_ACQUIRE, +#define XFRMNLGRP_ACQUIRE XFRMNLGRP_ACQUIRE + XFRMNLGRP_EXPIRE, +#define XFRMNLGRP_EXPIRE XFRMNLGRP_EXPIRE + XFRMNLGRP_SA, +#define XFRMNLGRP_SA XFRMNLGRP_SA + XFRMNLGRP_POLICY, +#define XFRMNLGRP_POLICY XFRMNLGRP_POLICY + XFRMNLGRP_AEVENTS, +#define XFRMNLGRP_AEVENTS XFRMNLGRP_AEVENTS + XFRMNLGRP_REPORT, +#define XFRMNLGRP_REPORT XFRMNLGRP_REPORT + XFRMNLGRP_MIGRATE, +#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE + XFRMNLGRP_MAPPING, +#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING + __XFRMNLGRP_MAX +}; +#define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1) + +#endif /* _LINUX_XFRM_H */ |