From f5f56e1a1c4d9e9496fcb9d81131066a964ccd23 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sat, 13 Apr 2024 14:15:43 +0200
Subject: Adding upstream version 2.4.1.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 src/bin/keactrl/keactrl.in | 599 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 599 insertions(+)
 create mode 100644 src/bin/keactrl/keactrl.in

(limited to 'src/bin/keactrl/keactrl.in')

diff --git a/src/bin/keactrl/keactrl.in b/src/bin/keactrl/keactrl.in
new file mode 100644
index 0000000..450e997
--- /dev/null
+++ b/src/bin/keactrl/keactrl.in
@@ -0,0 +1,599 @@
+#!/bin/sh
+
+# Copyright (C) 2014-2022 Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# This is keactrl script responsible for starting up Kea processes.
+# This script is used to run Kea from installation directory,
+# as well as for running tests.
+
+# shellcheck disable=SC2034
+# SC2034: ... appears unused. Verify use (or export if used externally).
+
+# shellcheck disable=SC2039
+# SC2039: In POSIX sh, 'local' is undefined.
+
+# shellcheck disable=SC2154
+# SC2154: ... is referenced but not assigned.
+# Reason: some variables are taken from keactrl.conf
+
+# Exit with error if commands exit with non-zero and if undefined variables are
+# used.
+set -eu
+
+VERSION="@PACKAGE_VERSION@"
+
+# Set the have_netconf flag to know if netconf is available.
+if test '@HAVE_NETCONF@' = 'yes'; then
+    have_netconf=true
+else
+    have_netconf=false
+fi
+
+### Logging functions ###
+
+# Logs message at the error level.
+log_error() {
+    printf "ERROR/keactrl: %s\n" "${1}"
+}
+
+# Logs message at the warning level.
+log_warning() {
+    printf "WARNING/keactrl: %s\n" "${1}"
+}
+
+# Logs message at the info level.
+log_info() {
+    printf "INFO/keactrl: %s\n" "${1}"
+}
+
+### Convenience functions ###
+
+# Checks if the value is in the list. An example usage of this function
+# is to determine whether the keactrl command belongs to the list of
+# supported commands.
+is_in_list() {
+    local member="${1-}"  # Value to be checked
+    local list="${2-}"    # Comma separated list of items
+    _inlist=0             # Return value: 0 if not in list, 1 otherwise.
+    if [ -z "${member}" ]; then
+        log_error "missing ${member}"
+    fi
+    # Iterate over all items on the list and compare with the member.
+    # If they match, return, otherwise log error and exit.
+    for item in ${list}
+    do
+        if [ "${item}" = "${member}" ]; then
+            _inlist=1
+            return
+        fi
+    done
+}
+
+# Prints keactrl usage.
+usage() {
+    printf "usage is %s command [-c keactrl-config-file] [-s server[,server,..]]\n" \
+           "$(basename -- "${0}")"
+    printf "commands: start stop reload status version\n"
+}
+
+### Functions managing Kea processes ###
+# Constructs a server's PID file based on its binary name, the config file,
+# and the --localstatedir and returns the contents as $_pid.   If the file
+# does not exist, the value of $_pid is 0.  If the file exists but cannot
+# be read the function exists with a error message. Note the PID file name
+# is always returned in $_pid_file.
+
+# There are some variables set in /etc/kea/keactrl.conf that's included here.
+# Since we run shellcheck against keactrl.in rather than an installed file,
+# we get false warnings about the variable being referenced but not assigned.
+get_pid_from_file() {
+    local proc_name="${1}"  # Process name.
+
+    local kea_config_file=
+    case ${proc_name} in
+    kea-dhcp4)
+        kea_config_file=${kea_dhcp4_config_file}
+        ;;
+    kea-dhcp6)
+        kea_config_file=${kea_dhcp6_config_file}
+        ;;
+    kea-dhcp-ddns)
+        kea_config_file=${kea_dhcp_ddns_config_file}
+        ;;
+    kea-ctrl-agent)
+        kea_config_file=${kea_ctrl_agent_config_file}
+        ;;
+    kea-netconf)
+        kea_config_file=${kea_netconf_config_file}
+        ;;
+    esac
+
+    # Extract the name portion (from last slash to last dot) of the config file name
+    # File name and extension are documented in src/lib/util/filename.h
+    local conf_name
+    conf_name=$(basename -- "${kea_config_file}" | rev | cut -f2- -d'.' | rev)
+
+    # Default the directory to --localstatedir / run
+    local pid_file_dir
+    pid_file_dir="@runstatedir@/@PACKAGE@"
+
+    # Use directory override if set (primarily for testing only)
+    if test -n "${KEA_PIDFILE_DIR+x}"; then
+        pid_file_dir=${KEA_PIDFILE_DIR}
+    fi
+
+    # construct the PID file name
+    _pid_file="${pid_file_dir}/${conf_name}.${proc_name}.pid"
+
+    # Grab the PID if the file exists
+    _pid=$(cat "${_pid_file}" 2> /dev/null || true)
+    if test -z "${_pid}"; then
+        # No file, means no pid
+        _pid=0;
+    fi
+}
+
+
+# Checks if the specified process is running by reading its
+# PID file and checking the PID it contains.  If the file does
+# not exist, the process is assumed to not be running.
+check_running() {
+    local proc_name="${1}"  # Process name.
+    # Initially mark the process as not running.
+    _running=0
+
+    # Get the PID from the PID file (if it exists)
+    get_pid_from_file "${proc_name}"
+    if [ ${_pid} -gt 0 ]; then
+        # Use ps to check if PID is alive
+        if ps -p ${_pid} 1>/dev/null; then
+            # No error, so PID IS ALIVE
+            _running=1
+        fi
+    fi
+}
+
+# Sends a signal to a process based on its PID file
+send_signal() {
+    local sig="${1}"        # Signal number
+    local proc_name="${2}"  # Process name.
+
+    get_pid_from_file "${proc_name}"
+    if [ "${_pid}" -eq 0 ]; then
+        log_info "Skip sending signal ${sig} to process ${proc_name}: \
+process is not running"
+    else
+        if ! kill "-${sig}" "${_pid}"; then
+            log_error "Failed to send signal ${sig} to process ${proc_name}, PID {$_pid}."
+        fi
+    fi
+}
+
+# Start the Kea process. Do not start the process if there is an instance
+# already running.
+start_server() {
+    binary_path=${1}    # Full path to the binary.
+    # Extract the name of the binary from the path.
+    local binary_name
+    binary_name=$(basename -- "${binary_path}")
+    # Use the binary name to check if the process is already running.
+    check_running "${binary_name}"
+    # If process is running, don't start another one. Just log a message.
+    if [ "${_running}" -ne 0 ]; then
+        log_info "${binary_name} appears to be running, see: \
+PID ${_pid}, PID file: ${_pid_file}."
+    else
+        log_info "Starting ${*}"
+        # Start the process.
+        "${@}" &
+    fi
+}
+
+# Instruct Kea process to shutdown by sending it signal 15
+stop_server() {
+    binary_path=${1}   # Full path to the binary.
+    local sig=15
+    # Extract the name of the binary from the path.
+    local binary_name
+    binary_name=$(basename -- "${binary_path}")
+
+    # Use the binary name to check if the process is already running.
+    check_running "${binary_name}"
+    # If process isn't running, don't start another one. Just log a message.
+    if [ "${_running}" -eq 0 ]; then
+        log_info "${binary_name} isn't running."
+    else
+        log_info "Stopping ${binary_name}..."
+        if ! kill "-${sig}" "${_pid}"; then
+            log_error "Stop failed, could not send signal ${sig} \
+to process ${proc_name}, PID ${_pid}."
+        fi
+    fi
+}
+
+# Instruct Kea process to reload config by sending it signal 1
+reload_server() {
+    binary_path=${1}   # Full path to the binary.
+    local sig=1
+    # Extract the name of the binary from the path.
+    local binary_name
+    binary_name=$(basename -- "${binary_path}")
+
+    # Use the binary name to check if the process is already running.
+    check_running "${binary_name}"
+    # If process isn't running, don't start another one. Just log a message.
+    if [ "${_running}" -eq 0 ]; then
+        log_info "${binary_name} isn't running."
+    else
+        log_info "Reloading ${binary_name}..."
+        if ! kill "-${sig}" "${_pid}"; then
+            log_error "Reload failed, could not send signal ${sig} \
+to process ${proc_name}, PID ${_pid}."
+        fi
+    fi
+}
+
+# Print Kea daemon version
+print_version() {
+    name=${1}
+    binary_path=${2}
+
+    if [ -e "${binary_path}" ]; then
+        if ! ver=$(${binary_path} -v); then
+            log_error "Error checking version of binary file: ${binary_path}"
+        fi
+    else
+        # No file, means no pid
+        ver="unknown, ${binary_path} missing";
+    fi
+
+    echo "${name}: ${ver}"
+}
+
+### Functions testing the existence of the Kea config file
+
+# Check if the Kea configuration file location has been specified in the
+# keactrl configuration file. If not, it is a warning or a fatal error.
+check_kea_conf() {
+    local conf_file="${1-}"     # Kea config file name.
+    if [ -z "${conf_file}" ]; then
+        log_error "Configuration file for Kea not specified."
+        exit 1
+    elif [ ! -f "${conf_file}" ]; then
+        log_error "Configuration file for Kea does not exist: ${conf_file}."
+        exit 1
+    fi
+}
+
+# Run the specified command if the server has been enabled.
+# In order for the command to run, the following conditions have to be met:
+# - server must be on the list of servers (e.g. specified from command line)
+#   or servers must contain all
+# - if check_file_cfg is non zero, the server must be enabled in the
+#   configuration file, so the variable named after server name should exist
+#   and be set to yes, e.g. ${dhcp4} should be equal to yes if server name
+#   is dhcp4
+run_conditional() {
+    local server="${1}"             # Server name: dhcp4, dhcp6, dhcp_ddns, ctrl_agent, netconf
+    local commands="${2}"           # Commands to execute
+    local check_file_cfg="${3}"     # Check if server enabled in the configuration file
+    local is_all=0                  # is all servers or a specific one
+
+    # If keyword "all" is not on the list of servers we will have to check
+    # if our specific server is on the list. If, not return.
+    is_in_list "all" "${servers}"
+    if [ "${_inlist}" -eq 0 ]; then
+        is_in_list "${server}" "${servers}"
+        if [ "${_inlist}" -eq 0 ]; then
+            return
+        fi
+    else
+        is_all=1
+    fi
+    # Return for for netconf when not available.
+    if [ "${server}" = "netconf" ]; then
+        if ! ${have_netconf}; then
+            return
+        fi
+        # reload is not supported for netconf.
+        if [ "${command}" = "reload" ]; then
+            if [ "${is_all}" -eq 1 ]; then
+                return
+            fi
+            log_warning "netconf does not support reload"
+            return
+        fi
+    fi
+
+    # Get the configuration value of the keactrl which indicates whether
+    # the server should be enabled or not. Variables that hold these values
+    # are: ${dhcp4}, ${dhcp6}, ${dhcp_ddns}.
+    local file_config
+    file_config=$( eval printf "%s" "\${$server}" )
+    # Run the commands if we ignore the configuration setting or if the
+    # setting is "yes".
+    if [ "${check_file_cfg}" -eq 0 ] || [ "${file_config}" = "yes" ]; then
+        ${commands}
+    fi
+}
+
+### Script starts here ###
+
+# Configure logger to log messages into the file.
+# Do not set destination if the KEA_LOGGER_DESTINATION is set,
+# because a unit test could have set this to some other location.
+# Note that when the configuration is applied this location may be
+# altered and only the handful of initial messages will be logged
+# to the default file.
+if [ -z "${KEA_LOGGER_DESTINATION+x}" ]; then
+    prefix="@prefix@"
+    export KEA_LOGGER_DESTINATION="@localstatedir@/log/kea.log"
+fi
+
+command=${1-}
+if [ -z "${command}" ]; then
+    log_error "missing command"
+    usage
+    exit 1
+fi
+
+# Check if this is a simple question about version.
+if test "${command}" = "-v" || test "${command}" = "--version" ; then
+    echo "${VERSION}"
+    exit 0
+fi
+
+is_in_list "${command}" "start stop reload status version"
+if [ "${_inlist}" -eq 0 ]; then
+    log_error "invalid command: ${command}"
+    exit 1
+fi
+
+# Get the location of the keactrl configuration file.
+prefix="@prefix@"
+localstatedir="@localstatedir@"
+keactrl_conf="@sysconfdir@/@PACKAGE@/keactrl.conf"
+
+servers="all"
+
+shift
+while test ${#} -gt 0
+do
+    option=${1}
+    case ${option} in
+        # Override keactrl configuration file.
+        -c|--ctrl-config)
+            shift
+            keactrl_conf=${1-}
+            if [ -z "${keactrl_conf}" ]; then
+                log_error "keactrl-config-file not specified"
+                usage
+                exit 1
+            fi
+            ;;
+        # Get the specific servers for which the command will be
+        # executed.
+        -s|--server)
+            shift
+            servers=$(printf '%s' "${1-}" | tr ',' '\n')
+            if [ -z "${servers}" ]; then
+                log_error "servers not specified"
+                usage
+                exit 1
+            fi
+            # Validate that the specified server names are correct.
+            for s in ${servers}
+            do
+                server_list="all dhcp4 dhcp6 dhcp_ddns ctrl_agent"
+                if ${have_netconf}; then
+                    server_list="${server_list} netconf"
+                fi
+                is_in_list "${s}" "${server_list}"
+                if [ "${_inlist}" -eq 0 ]; then
+                    log_error "invalid server name: ${s}"
+                    exit 1
+                fi
+            done
+            ;;
+        *)
+            log_error "invalid option: ${option}"
+            usage
+            exit 1
+    esac
+    shift
+done
+
+# Check if the file exists. If it doesn't, it is a fatal error.
+if [ ! -f "${keactrl_conf}" ]; then
+    log_error "keactrl configuration file doesn't exist in ${keactrl_conf}."
+    exit 1
+fi
+
+# Include the configuration file.
+# Shellcheck complaints about not being to follow the source. Let's ingore it.
+# shellcheck disable=SC1090
+. "${keactrl_conf}"
+
+# Get location of the DHCPv4 server binary.
+if [ -z "${dhcp4_srv+x}" ]; then
+    log_error "dhcp4_srv parameter not specified"
+    exit 1
+fi
+
+# Get location of the DHCPv6 server binary.
+if [ -z "${dhcp6_srv+x}" ]; then
+    log_error "dhcp6_srv parameter not specified"
+    exit 1
+fi
+
+# Get location of the DHCP DDNS server binary.
+if [ -z "${dhcp_ddns+x}" ]; then
+    log_error "dhcp_ddns parameter not specified"
+    exit 1
+fi
+
+# Get location of the Control Agent binary.
+if [ -z "${ctrl_agent_srv+x}" ]; then
+    log_error "ctrl_agent_srv parameter not specified"
+    exit 1
+fi
+
+# Get location of the Netconf binary.
+if ${have_netconf}; then
+    if [ -z "${netconf_srv+x}" ]; then
+        log_error "netconf_srv parameter not specified"
+        exit 1
+    fi
+fi
+
+# dhcp4 and dhcp6 (=yes) indicate if we should start DHCPv4 and DHCPv6 server
+# respectively. The same is true for ddns, ctrl-agent and netconf.
+dhcp4=$( printf "%s" "${dhcp4}" | tr '[:upper:]' '[:lower:]' )
+dhcp6=$( printf "%s" "${dhcp6}" | tr '[:upper:]' '[:lower:]' )
+dhcp_ddns=$( printf "%s" "${dhcp_ddns}" | tr '[:upper:]' '[:lower:]' )
+ctrl_agent=$( printf "%s" "${ctrl_agent}" | tr '[:upper:]' '[:lower:]' )
+if ${have_netconf}; then
+    netconf=$( printf "%s" "${netconf}" | tr '[:upper:]' '[:lower:]' )
+fi
+
+case ${command} in
+    # Start the servers.
+    start)
+        args=""
+        # kea_verbose is set in keactrl.conf that shellcheck is unable to load.
+        if [ "${kea_verbose}" = "yes" ]; then
+            args="-d"
+        fi
+
+        # Run servers if they are on the list of servers from the command line
+        # and if they are enabled in the keactrl configuration file.
+        # The variables (dhcp4_srv, dhcp6_serv, dhcp_ddns_srv etc) are set in the
+        # keactrl.conf file that shellcheck is unable to read.
+        run_conditional "dhcp4" "start_server ${dhcp4_srv} -c ${kea_dhcp4_config_file} ${args}" 1
+        run_conditional "dhcp6" "start_server ${dhcp6_srv} -c ${kea_dhcp6_config_file} ${args}" 1
+        run_conditional "dhcp_ddns" "start_server ${dhcp_ddns_srv} -c ${kea_dhcp_ddns_config_file} \
+${args}" 1
+        run_conditional "ctrl_agent" "start_server ${ctrl_agent_srv} -c ${kea_ctrl_agent_config_file} \
+${args}" 1
+        if ${have_netconf}; then
+            run_conditional "netconf" "start_server ${netconf_srv} -c ${kea_netconf_config_file} \
+${args}" 1
+        fi
+
+        exit 0 ;;
+
+    # Stop running servers.
+    stop)
+        # Stop all servers or servers specified from the command line.
+        run_conditional "dhcp4" "stop_server ${dhcp4_srv}" 0
+        run_conditional "dhcp6" "stop_server ${dhcp6_srv}" 0
+        run_conditional "dhcp_ddns" "stop_server ${dhcp_ddns_srv}" 0
+        run_conditional "ctrl_agent" "stop_server ${ctrl_agent_srv}" 0
+        if ${have_netconf}; then
+            run_conditional "netconf" "stop_server ${netconf_srv}" 0
+        fi
+
+        exit 0 ;;
+
+    # Reconfigure the servers.
+    reload)
+        # Reconfigure all servers or servers specified from the command line.
+        run_conditional "dhcp4" "reload_server ${dhcp4_srv}" 0
+        run_conditional "dhcp6" "reload_server ${dhcp6_srv}" 0
+        run_conditional "dhcp_ddns" "reload_server ${dhcp_ddns_srv}" 0
+        run_conditional "ctrl_agent" "reload_server ${ctrl_agent_srv}" 0
+        if ${have_netconf}; then
+            run_conditional "netconf" "reload_server ${netconf_srv}" 0
+        fi
+
+        exit 0 ;;
+
+    status)
+        if [ -t 1 ]; then
+            inactive="\033[91minactive\033[0m"
+            active="\033[92mactive\033[0m"
+        else
+            inactive="inactive"
+            active="active"
+        fi
+
+        kea4_status=$inactive
+        # This case of nested double quotes looks confusing, but it is actually
+        # correct. For details, see this fine explanation:
+        # https://unix.stackexchange.com/questions/443989/whats-the-right-way-to-quote-command-arg
+        check_running "$(basename -- "${dhcp4_srv}")"
+        if [ "${_running}" -eq 1 ]; then
+            kea4_status=$active
+        fi
+        printf "DHCPv4 server: %b\n" "${kea4_status}"
+
+        kea6_status=$inactive
+        check_running "$(basename -- "${dhcp6_srv}")"
+        if [ "${_running}" -eq 1 ]; then
+            kea6_status=$active
+        fi
+        printf "DHCPv6 server: %b\n" "${kea6_status}"
+
+        d2_status=$inactive
+        check_running "$(basename -- "${dhcp_ddns_srv}")"
+        if [ "${_running}" -eq 1 ]; then
+            d2_status=$active
+        fi
+        printf "DHCP DDNS: %b\n" "${d2_status}"
+
+        agent_status=$inactive
+        check_running "$(basename -- "${ctrl_agent_srv}")"
+        if [ "${_running}" -eq 1 ]; then
+            agent_status=$active
+        fi
+        printf "Control Agent: %b\n" "${agent_status}"
+
+        if ${have_netconf}; then
+            netconf_status=$inactive
+            check_running "$(basename -- "${netconf_srv}")"
+            if [ "${_running}" -eq 1 ]; then
+                netconf_status=$active
+            fi
+            printf "Netconf agent: %b\n" "${netconf_status}"
+        fi
+
+        printf "Kea DHCPv4 configuration file: %s\n" "${kea_dhcp4_config_file}"
+        printf "Kea DHCPv6 configuration file: %s\n" "${kea_dhcp6_config_file}"
+        printf "Kea DHCP DDNS configuration file: %s\n" "${kea_dhcp_ddns_config_file}"
+        printf "Kea Control Agent configuration file: %s\n" "${kea_ctrl_agent_config_file}"
+        if ${have_netconf}; then
+            printf "Kea Netconf configuration file: %s\n" "${kea_netconf_config_file}"
+        fi
+        printf "keactrl configuration file: %s\n" "${keactrl_conf}"
+
+        check_kea_conf "${kea_dhcp4_config_file}"
+        check_kea_conf "${kea_dhcp6_config_file}"
+        check_kea_conf "${kea_dhcp_ddns_config_file}"
+        check_kea_conf "${kea_ctrl_agent_config_file}"
+        if ${have_netconf}; then
+            check_kea_conf "${kea_netconf_config_file}"
+        fi
+
+        exit 0 ;;
+
+    version)
+        echo "keactrl: ${VERSION}"
+        run_conditional "dhcp4" "print_version kea-dhcp4 ${dhcp4_srv}" 0
+        run_conditional "dhcp6" "print_version kea-dhcp6 ${dhcp6_srv}" 0
+        run_conditional "dhcp_ddns" "print_version kea-dhcp-ddns ${dhcp_ddns_srv}" 0
+        run_conditional "ctrl_agent" "print_version kea-ctrl-agent ${ctrl_agent_srv}" 0
+        if ${have_netconf}; then
+            run_conditional "netconf" "print_version kea-netconf ${netconf_srv}" 0
+        fi
+
+        exit 0 ;;
+
+    # No other commands are supported.
+    *)
+        log_error "Invalid command:  ${command}."
+        exit 1 ;;
+esac
-- 
cgit v1.2.3