.. _quickstart:
***********
Quick Start
***********
This section describes the basic steps needed to get Kea up and running.
For further details, full customizations, and troubleshooting, see the
respective chapters elsewhere in this Kea Administrator Reference Manual (ARM).
.. _quick-start-tarball:
Quick Start Guide Using tarball
===============================
1. Install required runtime and build dependencies. See
:ref:`build-requirements` for details.
2. Download the Kea source tarball from the `ISC.org downloads
page `__ or the `ISC downloads site
`__.
3. Extract the tarball. For example:
.. parsed-literal::
$ tar -xvzf kea-|release|.tar.gz
4. Go into the source directory and run the configure script:
.. parsed-literal::
$ cd kea-|release|
$ ./configure [your extra parameters]
5. Build it:
.. code-block:: console
$ make
6. Install it (by default it will be placed in ``/usr/local/``, so
root privileges are likely required for this step):
.. code-block:: console
$ make install
.. _quick-start-repo:
Quick Start Guide Using Native Packages
=======================================
ISC provides native Alpine, deb, and RPM packages, which make Kea installation
much easier. Unless specific compilation options are desired, it is usually
easier to install Kea using native packages.
1. Go to `Kea on cloudsmith.io `__,
choose the Kea version, and enter the repository.
2. Use ``Set Me Up`` and follow instructions to add the repository
to the local system.
.. note::
For example, the Debian setup instructions for Kea 2.3 can be found here:
https://cloudsmith.io/~isc/repos/kea-2-3/setup/#formats-deb
The dropdown near the top of the page offers instructions for
other operating systems.
3. Update system repositories. For example, on Debian/Ubuntu:
.. code-block:: console
$ sudo apt update
On CentOS/Fedora:
.. code-block:: console
$ sudo yum update
On Alpine:
.. code-block:: console
# apk update
4. Kea is split into various packages. The entire list is available on
`cloudsmith.io `__ or using apt/yum/dnf.
For example, on Debian/Ubuntu:
.. code-block:: console
$ apt search isc-kea
On CentOS/Fedora:
.. code-block:: console
$ yum search isc-kea
On Alpine:
.. code-block:: console
$ apk search isc-kea
5. Install the metapackage containing all of the tools, services, and open
source hooks:
.. code-block:: console
$ sudo apt install isc-kea
or specific packages:
.. code-block:: console
$ sudo apt install isc-kea-dhcp6
or every single Kea-related package, including development headers, debug
symbols, and premium hooks (if available):
.. code-block:: console
$ sudo apt install isc-kea*
or all packages with a specified version number:
.. code-block:: console
$ sudo apt install isc-kea*=2.4.0-isc20230531000000
.. note::
Not all package managers support installing packages with a glob (``*``),
please refer to the specific package manager's manual before attempting this.
- On CentOS/Fedora systems, replace ``apt install`` with ``yum install``.
- On Alpine systems, replace ``apt install`` with ``apk add``.
6. All installed packages should be now available directly; for example:
.. code-block:: console
# kea-dhcp6 -c /path/to/your/kea6/config/file.json
or using systemd:
.. code-block:: console
# systemctl restart kea-dhcp6
or using OpenRC on Alpine:
.. code-block:: console
# service kea-dhcp6 restart
.. note::
:iscman:`keactrl` is not available in packages, as similar functionality is provided
by the native systemctl scripts.
7. On CentOS, Fedora, and Alpine, the service must be enabled at boot
time if desired; this is done automatically at package
installation time on Debian and Ubuntu systems. For example, with systemd
on CentOS/Fedora:
.. code-block:: console
# systemctl enable kea-dhcp6
With OpenRC on Alpine:
.. code-block:: console
# rc-update add kea-dhcp6
.. _quick-start-services:
Quick Start Guide for DHCPv4 and DHCPv6 Services
================================================
1. Edit the Kea configuration files, which by default are installed in
the ``[kea-install-dir]/etc/kea/`` directory. These are:
``kea-dhcp4.conf``, ``kea-dhcp6.conf``, ``kea-dhcp-ddns.conf`` and
``kea-ctrl-agent.conf``, ``keactrl.conf`` for DHCPv4 server, DHCPv6 server,
D2, Control Agent, and the keactrl script, respectively.
2. To start the DHCPv4 server in the background, run the
following command (as root):
.. code-block:: console
# keactrl start -s dhcp4
Or run the following command to start the DHCPv6 server:
.. code-block:: console
# keactrl start -s dhcp6
Note that it is also possible to start all servers simultaneously:
.. code-block:: console
# keactrl start
3. Verify that the Kea server(s) is/are running:
.. code-block:: console
# keactrl status
A server status of "inactive" may indicate a configuration error.
Please check the log file (by default named
``[kea-install-dir]/var/log/kea-dhcp4.log``,
``[kea-install-dir]/var/log/kea-dhcp6.log``,
``[kea-install-dir]/var/log/kea-ddns.log``, or
``[kea-install-dir]/var/log/kea-ctrl-agent.log``) for the details of
any errors.
4. If the server has started successfully, test that it is
responding to DHCP queries and that the client receives a
configuration from the server; for example, use the `ISC DHCP
client `__.
5. To stop running the server(s):
.. code-block:: console
# keactrl stop
For system-specific instructions, please read the
`system-specific notes `__,
available in the Kea section of `ISC's
Knowledgebase `__.
The details of :iscman:`keactrl` script usage can be found in :ref:`keactrl`.
Once Kea services are up and running, consider deploying a dashboard solution
to monitor running services. For more details, see :ref:`stork`.
.. _quick-start-direct-run:
Running the Kea Servers Directly
================================
The Kea servers can be started directly, without the need to use
:iscman:`keactrl` or ``systemctl``. To start the DHCPv4 server run the following command:
.. code-block:: console
# kea-dhcp4 -c /path/to/your/kea4/config/file.json
Similarly, to start the DHCPv6 server, run the following command:
.. code-block:: console
# kea-dhcp6 -c /path/to/your/kea6/config/file.json